From: Greg Kroah-Hartman gregkh@linuxfoundation.org
From: Mathias Nyman mathias.nyman@linux.intel.com
commit 253f588c70f66184b1f3a9bbb428b49bbda73e80 upstream.
A xHC USB 3 port might miss the first wake signal from a USB 3 device if the port LFPS reveiver isn't enabled fast enough after xHC resume.
xHC host will anyway be resumed by a PME# signal, but will go back to suspend if no port activity is seen. The device resends the U3 LFPS wake signal after a 100ms delay, but by then host is already suspended, starting all over from the beginning of this issue.
USB 3 specs say U3 wake LFPS signal is sent for max 10ms, then device needs to delay 100ms before resending the wake.
Don't suspend immediately if port activity isn't detected in resume. Instead add a retry. If there is no port activity then delay for 120ms, and re-check for port activity.
Cc: stable@vger.kernel.org Signed-off-by: Mathias Nyman mathias.nyman@linux.intel.com Link: https://lore.kernel.org/r/20210311115353.2137560-3-mathias.nyman@linux.intel... Signed-off-by: Greg Kroah-Hartman gregkh@linuxfoundation.org --- drivers/usb/host/xhci.c | 16 +++++++++++++--- 1 file changed, 13 insertions(+), 3 deletions(-)
--- a/drivers/usb/host/xhci.c +++ b/drivers/usb/host/xhci.c @@ -1022,6 +1022,7 @@ int xhci_resume(struct xhci_hcd *xhci, b struct usb_hcd *secondary_hcd; int retval = 0; bool comp_timer_running = false; + bool pending_portevent = false;
if (!hcd->state) return 0; @@ -1155,13 +1156,22 @@ int xhci_resume(struct xhci_hcd *xhci, b
done: if (retval == 0) { - /* Resume root hubs only when have pending events. */ - if (xhci_pending_portevent(xhci)) { + /* + * Resume roothubs only if there are pending events. + * USB 3 devices resend U3 LFPS wake after a 100ms delay if + * the first wake signalling failed, give it that chance. + */ + pending_portevent = xhci_pending_portevent(xhci); + if (!pending_portevent) { + msleep(120); + pending_portevent = xhci_pending_portevent(xhci); + } + + if (pending_portevent) { usb_hcd_resume_root_hub(xhci->shared_hcd); usb_hcd_resume_root_hub(hcd); } } - /* * If system is subject to the Quirk, Compliance Mode Timer needs to * be re-initialized Always after a system resume. Ports are subject