From: Hans de Goede hdegoede@redhat.com
[ Upstream commit d8f20383a2fc3a3844b08a4999cf0e81164a0e56 ]
The x86 Android tablets on which quirks to skip looking for a matching UartSerialBus resource and instead unconditionally create a serial bus device (serdev) are necessary there are 2 sorts of serialports:
ACPI enumerated highspeed designware UARTs, these are the ones which typcially need to be skipped since they need a serdev for the attached BT HCI.
A PNP enumerated UART which is part of the PCU. So far the existing quirks have ignored this. But on the Lenovo Yoga Tablet 2 Pro 1380 models this is used for a custom fastcharging protocol. There is a Micro USB switch which can switch the USB data lines to this uart and then a 600 baud protocol is used to configure the charger for a voltage higher then 5V.
Add a new ACPI_QUIRK_PNP_UART1_SKIP quirk type and set this for the existing entry for the Lenovo Yoga Tablet 2 830 / 1050 models. Note this will lead to unnecessarily also creating a serdev for the PCU UART on the 830 / 1050 which don't need this, but the UART is not used otherwise there so that is not a problem.
Signed-off-by: Hans de Goede hdegoede@redhat.com Signed-off-by: Rafael J. Wysocki rafael.j.wysocki@intel.com Signed-off-by: Sasha Levin sashal@kernel.org --- drivers/acpi/x86/utils.c | 20 +++++++++++++------- 1 file changed, 13 insertions(+), 7 deletions(-)
diff --git a/drivers/acpi/x86/utils.c b/drivers/acpi/x86/utils.c index c708524576df4..f8cdc234cbc3f 100644 --- a/drivers/acpi/x86/utils.c +++ b/drivers/acpi/x86/utils.c @@ -261,9 +261,10 @@ bool force_storage_d3(void) #define ACPI_QUIRK_SKIP_I2C_CLIENTS BIT(0) #define ACPI_QUIRK_UART1_SKIP BIT(1) #define ACPI_QUIRK_UART1_TTY_UART2_SKIP BIT(2) -#define ACPI_QUIRK_SKIP_ACPI_AC_AND_BATTERY BIT(3) -#define ACPI_QUIRK_USE_ACPI_AC_AND_BATTERY BIT(4) -#define ACPI_QUIRK_SKIP_GPIO_EVENT_HANDLERS BIT(5) +#define ACPI_QUIRK_PNP_UART1_SKIP BIT(3) +#define ACPI_QUIRK_SKIP_ACPI_AC_AND_BATTERY BIT(4) +#define ACPI_QUIRK_USE_ACPI_AC_AND_BATTERY BIT(5) +#define ACPI_QUIRK_SKIP_GPIO_EVENT_HANDLERS BIT(6)
static const struct dmi_system_id acpi_quirk_skip_dmi_ids[] = { /* @@ -343,6 +344,7 @@ static const struct dmi_system_id acpi_quirk_skip_dmi_ids[] = { DMI_MATCH(DMI_BIOS_VERSION, "BLADE_21"), }, .driver_data = (void *)(ACPI_QUIRK_SKIP_I2C_CLIENTS | + ACPI_QUIRK_PNP_UART1_SKIP | ACPI_QUIRK_SKIP_ACPI_AC_AND_BATTERY), }, { @@ -441,14 +443,18 @@ static int acpi_dmi_skip_serdev_enumeration(struct device *controller_parent, bo if (ret) return 0;
- /* to not match on PNP enumerated debug UARTs */ - if (!dev_is_platform(controller_parent)) - return 0; - dmi_id = dmi_first_match(acpi_quirk_skip_dmi_ids); if (dmi_id) quirks = (unsigned long)dmi_id->driver_data;
+ if (!dev_is_platform(controller_parent)) { + /* PNP enumerated UARTs */ + if ((quirks & ACPI_QUIRK_PNP_UART1_SKIP) && uid == 1) + *skip = true; + + return 0; + } + if ((quirks & ACPI_QUIRK_UART1_SKIP) && uid == 1) *skip = true;