From: Raju Rangoju Raju.Rangoju@amd.com
[ Upstream commit 09c5f6bf11ac98874339e55f4f5f79a9dbc9b375 ]
The current XGBE code assumes that offset 6 of EEPROM SFP DAC (passive) cables is NULL. However, some cables (the 5 meter and 7 meter Molex passive cables) have non-zero data at offset 6. Fix the logic by moving the passive cable check above the active checks, so as not to be improperly identified as an active cable. This will fix the issue for any passive cable that advertises 1000Base-CX in offset 6.
Fixes: abf0a1c2b26a ("amd-xgbe: Add support for SFP+ modules") Signed-off-by: Raju Rangoju Raju.Rangoju@amd.com Acked-by: Tom Lendacky thomas.lendacky@amd.com Signed-off-by: Jakub Kicinski kuba@kernel.org Signed-off-by: Sasha Levin sashal@kernel.org --- drivers/net/ethernet/amd/xgbe/xgbe-phy-v2.c | 8 ++++---- 1 file changed, 4 insertions(+), 4 deletions(-)
diff --git a/drivers/net/ethernet/amd/xgbe/xgbe-phy-v2.c b/drivers/net/ethernet/amd/xgbe/xgbe-phy-v2.c index 0b325ae875b5..5069ae164ecf 100644 --- a/drivers/net/ethernet/amd/xgbe/xgbe-phy-v2.c +++ b/drivers/net/ethernet/amd/xgbe/xgbe-phy-v2.c @@ -1150,7 +1150,10 @@ static void xgbe_phy_sfp_parse_eeprom(struct xgbe_prv_data *pdata) }
/* Determine the type of SFP */ - if (sfp_base[XGBE_SFP_BASE_10GBE_CC] & XGBE_SFP_BASE_10GBE_CC_SR) + if (phy_data->sfp_cable == XGBE_SFP_CABLE_PASSIVE && + xgbe_phy_sfp_bit_rate(sfp_eeprom, XGBE_SFP_SPEED_10000)) + phy_data->sfp_base = XGBE_SFP_BASE_10000_CR; + else if (sfp_base[XGBE_SFP_BASE_10GBE_CC] & XGBE_SFP_BASE_10GBE_CC_SR) phy_data->sfp_base = XGBE_SFP_BASE_10000_SR; else if (sfp_base[XGBE_SFP_BASE_10GBE_CC] & XGBE_SFP_BASE_10GBE_CC_LR) phy_data->sfp_base = XGBE_SFP_BASE_10000_LR; @@ -1166,9 +1169,6 @@ static void xgbe_phy_sfp_parse_eeprom(struct xgbe_prv_data *pdata) phy_data->sfp_base = XGBE_SFP_BASE_1000_CX; else if (sfp_base[XGBE_SFP_BASE_1GBE_CC] & XGBE_SFP_BASE_1GBE_CC_T) phy_data->sfp_base = XGBE_SFP_BASE_1000_T; - else if ((phy_data->sfp_cable == XGBE_SFP_CABLE_PASSIVE) && - xgbe_phy_sfp_bit_rate(sfp_eeprom, XGBE_SFP_SPEED_10000)) - phy_data->sfp_base = XGBE_SFP_BASE_10000_CR;
switch (phy_data->sfp_base) { case XGBE_SFP_BASE_1000_T: