6.12-stable review patch. If anyone has any objections, please let me know.
------------------
From: Frank Li Frank.Li@nxp.com
[ Upstream commit c771d311b1901cd4679c8fc7f89a882fe07cf4a0 ]
Fix the issue where both 'output-low' and 'output-high' exist under GPIO hog nodes (rst_usb_hub_hog and sel_usb_hub_hog) when applying device tree overlays. Since /delete-property/ is not supported in the overlays, setting 'output-low' results in both properties being present. The workaround is to disable these hogs and create new ones with 'output-low' as needed.
Fix below CHECK_DTBS warning: arch/arm64/boot/dts/freescale/imx8mn-tqma8mqnl-mba8mx-usbotg.dtb: sel-usb-hub-hog: {'output-low': True, 'gpio-hog': True, 'gpios': [[1, 0]], 'output-high': True, 'phandle': 108, '$nodename': ['sel-usb-hub-hog']} is valid under each of {'required': ['output-low']}, {'required': ['output-high']
Fixes: 3f6fc30abebc ("arm64: dts: imx8mn: tqma8mqnl-mba8mx: Add USB DR overlay") Signed-off-by: Frank Li Frank.Li@nxp.com Reviewed-by: Alexander Stein alexander.stein@ew.tq-group.com Signed-off-by: Shawn Guo shawnguo@kernel.org Signed-off-by: Sasha Levin sashal@kernel.org --- .../imx8mn-tqma8mqnl-mba8mx-usbotg.dtso | 29 +++++++++++++++++-- 1 file changed, 27 insertions(+), 2 deletions(-)
diff --git a/arch/arm64/boot/dts/freescale/imx8mn-tqma8mqnl-mba8mx-usbotg.dtso b/arch/arm64/boot/dts/freescale/imx8mn-tqma8mqnl-mba8mx-usbotg.dtso index 96db07fc9bece..1f2a0fe70a0a2 100644 --- a/arch/arm64/boot/dts/freescale/imx8mn-tqma8mqnl-mba8mx-usbotg.dtso +++ b/arch/arm64/boot/dts/freescale/imx8mn-tqma8mqnl-mba8mx-usbotg.dtso @@ -29,12 +29,37 @@ usb_dr_connector: endpoint { }; };
+/* + * rst_usb_hub_hog and sel_usb_hub_hog have property 'output-high', + * dt overlay don't support /delete-property/. Both 'output-low' and + * 'output-high' will be exist under hog nodes if overlay file set + * 'output-low'. Workaround is disable these hog and create new hog with + * 'output-low'. + */ + &rst_usb_hub_hog { - output-low; + status = "disabled"; +}; + +&expander0 { + rst-usb-low-hub-hog { + gpio-hog; + gpios = <13 0>; + output-low; + line-name = "RST_USB_HUB#"; + }; };
&sel_usb_hub_hog { - output-low; + status = "disabled"; +}; + +&gpio2 { + sel-usb-low-hub-hog { + gpio-hog; + gpios = <1 GPIO_ACTIVE_HIGH>; + output-low; + }; };
&usbotg1 {