From: Eric Chanudet echanude@redhat.com
[ Upstream commit 10a39667a117daf0c1baaebcbe589715ee79178b ]
On sa8775p-ride, probing the HBA will go through the UFSHCD_QUIRK_REINIT_AFTER_MAX_GEAR_SWITCH path although the power info is the same during the second init.
The REINIT quirk only applies starting with controller v4. For these, ufs_qcom_get_hs_gear() reads the highest supported gear when setting the host_params. After the negotiation, if the host and device are on the same gear, it is the highest gear supported between the two. Skip REINIT to save some time.
Signed-off-by: Eric Chanudet echanude@redhat.com Link: https://lore.kernel.org/r/20240123192854.1724905-4-echanude@redhat.com Reviewed-by: Manivannan Sadhasivam manivannan.sadhasivam@linaro.org Tested-by: Andrew Halaney ahalaney@redhat.com # sa8775p-ride Signed-off-by: Martin K. Petersen martin.petersen@oracle.com Signed-off-by: Sasha Levin sashal@kernel.org --- drivers/ufs/host/ufs-qcom.c | 13 +++++++++++-- 1 file changed, 11 insertions(+), 2 deletions(-)
diff --git a/drivers/ufs/host/ufs-qcom.c b/drivers/ufs/host/ufs-qcom.c index 39eef470f8fa5..f7dba7236c6e5 100644 --- a/drivers/ufs/host/ufs-qcom.c +++ b/drivers/ufs/host/ufs-qcom.c @@ -738,8 +738,17 @@ static int ufs_qcom_pwr_change_notify(struct ufs_hba *hba, * the second init can program the optimal PHY settings. This allows one to start * the first init with either the minimum or the maximum support gear. */ - if (hba->ufshcd_state == UFSHCD_STATE_RESET) - host->phy_gear = dev_req_params->gear_tx; + if (hba->ufshcd_state == UFSHCD_STATE_RESET) { + /* + * Skip REINIT if the negotiated gear matches with the + * initial phy_gear. Otherwise, update the phy_gear to + * program the optimal gear setting during REINIT. + */ + if (host->phy_gear == dev_req_params->gear_tx) + hba->quirks &= ~UFSHCD_QUIRK_REINIT_AFTER_MAX_GEAR_SWITCH; + else + host->phy_gear = dev_req_params->gear_tx; + }
/* enable the device ref clock before changing to HS mode */ if (!ufshcd_is_hs_mode(&hba->pwr_info) &&