From: Bin Liu b-liu@ti.com
[ Upstream commit 6010abf2c2c0e382d7e8ee44bd11f343aae90cce ]
Due to lack of ID pin interrupt event on AM335x devices, the musb dsps driver uses polling to detect usb device attach for dual-role port.
But in the case if a micro-A cable adapter is attached without a USB device attached to the cable, the musb state machine gets stuck in a_wait_vrise state waiting for the MUSB_CONNECT interrupt which won't happen due to the usb device is not attached. The state is stuck in a_wait_vrise even after the micro-A cable is detached, which could cause VBUS retention if then the dual-role port is attached to a host port.
To fix the problem, make a_wait_vrise as a transient state, then move the state to either a_wait_bcon for host port or a_idle state for dual-role port, if no usb device is attached to the port.
Signed-off-by: Bin Liu b-liu@ti.com Signed-off-by: Greg Kroah-Hartman gregkh@linuxfoundation.org Signed-off-by: Sasha Levin sashal@kernel.org --- drivers/usb/musb/musb_dsps.c | 9 +++++++-- 1 file changed, 7 insertions(+), 2 deletions(-)
diff --git a/drivers/usb/musb/musb_dsps.c b/drivers/usb/musb/musb_dsps.c index dbb482b7e0ba..b7d460adaa61 100644 --- a/drivers/usb/musb/musb_dsps.c +++ b/drivers/usb/musb/musb_dsps.c @@ -242,8 +242,13 @@ static int dsps_check_status(struct musb *musb, void *unused)
switch (musb->xceiv->otg->state) { case OTG_STATE_A_WAIT_VRISE: - dsps_mod_timer_optional(glue); - break; + if (musb->port_mode == MUSB_HOST) { + musb->xceiv->otg->state = OTG_STATE_A_WAIT_BCON; + dsps_mod_timer_optional(glue); + break; + } + /* fall through */ + case OTG_STATE_A_WAIT_BCON: /* keep VBUS on for host-only mode */ if (musb->port_mode == MUSB_PORT_MODE_HOST) {