From: Vijayakumar Durai vijayakumar.durai1@vivint.com
commit 746ba11f170603bf1eaade817553a6c2e9135bbe upstream.
Currently rt2x00 devices retransmit the management frames with incremented sequence number if hardware is assigning the sequence.
This is HW bug fixed already for non-QOS data frames, but it should be fixed for management frames except beacon.
Without fix retransmitted frames have wrong SN:
AlphaNet_e8:fb:36 Vivotek_52:31:51 Authentication, SN=1648, FN=0, Flags=........C Frame is not being retransmitted 1648 1 AlphaNet_e8:fb:36 Vivotek_52:31:51 Authentication, SN=1649, FN=0, Flags=....R...C Frame is being retransmitted 1649 1 AlphaNet_e8:fb:36 Vivotek_52:31:51 Authentication, SN=1650, FN=0, Flags=....R...C Frame is being retransmitted 1650 1
With the fix SN stays correctly the same:
88:6a:e3:e8:f9:a2 8c:f5:a3:88:76:87 Authentication, SN=1450, FN=0, Flags=........C 88:6a:e3:e8:f9:a2 8c:f5:a3:88:76:87 Authentication, SN=1450, FN=0, Flags=....R...C 88:6a:e3:e8:f9:a2 8c:f5:a3:88:76:87 Authentication, SN=1450, FN=0, Flags=....R...C
Cc: stable@vger.kernel.org Signed-off-by: Vijayakumar Durai vijayakumar.durai1@vivint.com [sgruszka: simplify code, change comments and changelog] Signed-off-by: Stanislaw Gruszka sgruszka@redhat.com Signed-off-by: Kalle Valo kvalo@codeaurora.org Signed-off-by: Greg Kroah-Hartman gregkh@linuxfoundation.org
--- drivers/net/wireless/ralink/rt2x00/rt2x00.h | 1 - drivers/net/wireless/ralink/rt2x00/rt2x00mac.c | 10 ---------- drivers/net/wireless/ralink/rt2x00/rt2x00queue.c | 15 +++++++++------ 3 files changed, 9 insertions(+), 17 deletions(-)
--- a/drivers/net/wireless/ralink/rt2x00/rt2x00.h +++ b/drivers/net/wireless/ralink/rt2x00/rt2x00.h @@ -673,7 +673,6 @@ enum rt2x00_state_flags { CONFIG_CHANNEL_HT40, CONFIG_POWERSAVING, CONFIG_HT_DISABLED, - CONFIG_QOS_DISABLED, CONFIG_MONITORING,
/* --- a/drivers/net/wireless/ralink/rt2x00/rt2x00mac.c +++ b/drivers/net/wireless/ralink/rt2x00/rt2x00mac.c @@ -642,19 +642,9 @@ void rt2x00mac_bss_info_changed(struct i rt2x00dev->intf_associated--;
rt2x00leds_led_assoc(rt2x00dev, !!rt2x00dev->intf_associated); - - clear_bit(CONFIG_QOS_DISABLED, &rt2x00dev->flags); }
/* - * Check for access point which do not support 802.11e . We have to - * generate data frames sequence number in S/W for such AP, because - * of H/W bug. - */ - if (changes & BSS_CHANGED_QOS && !bss_conf->qos) - set_bit(CONFIG_QOS_DISABLED, &rt2x00dev->flags); - - /* * When the erp information has changed, we should perform * additional configuration steps. For all other changes we are done. */ --- a/drivers/net/wireless/ralink/rt2x00/rt2x00queue.c +++ b/drivers/net/wireless/ralink/rt2x00/rt2x00queue.c @@ -201,15 +201,18 @@ static void rt2x00queue_create_tx_descri if (!rt2x00_has_cap_flag(rt2x00dev, REQUIRE_SW_SEQNO)) { /* * rt2800 has a H/W (or F/W) bug, device incorrectly increase - * seqno on retransmited data (non-QOS) frames. To workaround - * the problem let's generate seqno in software if QOS is - * disabled. + * seqno on retransmitted data (non-QOS) and management frames. + * To workaround the problem let's generate seqno in software. + * Except for beacons which are transmitted periodically by H/W + * hence hardware has to assign seqno for them. */ - if (test_bit(CONFIG_QOS_DISABLED, &rt2x00dev->flags)) - __clear_bit(ENTRY_TXD_GENERATE_SEQ, &txdesc->flags); - else + if (ieee80211_is_beacon(hdr->frame_control)) { + __set_bit(ENTRY_TXD_GENERATE_SEQ, &txdesc->flags); /* H/W will generate sequence number */ return; + } + + __clear_bit(ENTRY_TXD_GENERATE_SEQ, &txdesc->flags); }
/*