commit ad3f993a0857ad3b792e7463828eb0d90cdd6f4d upstream.
We use always 1 as band parameter for MCU_CAL_LC, this break 2GHz, we should use 0 for this band instead.
Patch fixes problems happened sometimes when try to associate with 2GHz AP and manifest by errors like below:
[14680.920823] wlan0: authenticate with 18:31:bf:c0:51:b0 [14681.109506] wlan0: send auth to 18:31:bf:c0:51:b0 (try 1/3) [14681.310454] wlan0: send auth to 18:31:bf:c0:51:b0 (try 2/3) [14681.518469] wlan0: send auth to 18:31:bf:c0:51:b0 (try 3/3) [14681.726499] wlan0: authentication with 18:31:bf:c0:51:b0 timed out
Fixes: 9aec146d0f6b ("mt76x0: pci: introduce mt76x0_phy_calirate routine") Signed-off-by: Stanislaw Gruszka sgruszka@redhat.com Signed-off-by: Stanislaw Gruszka sgruszka@redhat.com --- drivers/net/wireless/mediatek/mt76/mt76x0/phy.c | 5 +++-- 1 file changed, 3 insertions(+), 2 deletions(-)
diff --git a/drivers/net/wireless/mediatek/mt76/mt76x0/phy.c b/drivers/net/wireless/mediatek/mt76/mt76x0/phy.c index 1af2a1227924..b1314c0f74c8 100644 --- a/drivers/net/wireless/mediatek/mt76/mt76x0/phy.c +++ b/drivers/net/wireless/mediatek/mt76/mt76x0/phy.c @@ -585,6 +585,7 @@ void mt76x0_phy_set_txpower(struct mt76x02_dev *dev) void mt76x0_phy_calibrate(struct mt76x02_dev *dev, bool power_on) { struct ieee80211_channel *chan = dev->mt76.chandef.chan; + int is_5ghz = (chan->band == NL80211_BAND_5GHZ) ? 1 : 0; u32 val, tx_alc, reg_val;
if (power_on) { @@ -602,7 +603,7 @@ void mt76x0_phy_calibrate(struct mt76x02_dev *dev, bool power_on) reg_val = mt76_rr(dev, MT_BBP(IBI, 9)); mt76_wr(dev, MT_BBP(IBI, 9), 0xffffff7e);
- if (chan->band == NL80211_BAND_5GHZ) { + if (is_5ghz) { if (chan->hw_value < 100) val = 0x701; else if (chan->hw_value < 140) @@ -615,7 +616,7 @@ void mt76x0_phy_calibrate(struct mt76x02_dev *dev, bool power_on)
mt76x02_mcu_calibrate(dev, MCU_CAL_FULL, val, false); msleep(350); - mt76x02_mcu_calibrate(dev, MCU_CAL_LC, 1, false); + mt76x02_mcu_calibrate(dev, MCU_CAL_LC, is_5ghz, false); usleep_range(15000, 20000);
mt76_wr(dev, MT_BBP(IBI, 9), reg_val);