From: Uwe Kleine-König u.kleine-koenig@pengutronix.de
In commit 88462d2a7830 ("can: flexcan: Remodel FlexCAN register r/w APIs for big endian FlexCAN controllers.") the following logic was implemented:
if the dt property "big-endian" is given or the device is compatible to "fsl,p1010-flexcan": use big-endian mode; else use little-endian mode;
This relies on commit d50f4630c2e1 ("arm: dts: Remove p1010-flexcan compatible from imx series dts") which was applied a few commits later. Without this commit (or an old device tree used for booting a new kernel) the flexcan devices on i.MX25, i.MX28, i.MX35 and i.MX53 match the 'the device is compatible to "fsl,p1010-flexcan"' test and so are switched erroneously to big endian mode.
Instead of the check above put a quirk in devtype data and rely on of_match_device yielding the most compatible match
Fixes: 88462d2a7830 ("can: flexcan: Remodel FlexCAN register r/w APIs for big endian FlexCAN controllers.") Signed-off-by: Uwe Kleine-König u.kleine-koenig@pengutronix.de Tested-by: Gavin Schenk g.schenk@eckelmann.de Cc: linux-stable stable@vger.kernel.org # >= v4.16 Signed-off-by: Marc Kleine-Budde mkl@pengutronix.de --- drivers/net/can/flexcan.c | 26 ++++++++++++++------------ 1 file changed, 14 insertions(+), 12 deletions(-)
diff --git a/drivers/net/can/flexcan.c b/drivers/net/can/flexcan.c index 634c51e6b8ae..d53a45bf2a72 100644 --- a/drivers/net/can/flexcan.c +++ b/drivers/net/can/flexcan.c @@ -200,6 +200,7 @@ #define FLEXCAN_QUIRK_DISABLE_MECR BIT(4) /* Disable Memory error detection */ #define FLEXCAN_QUIRK_USE_OFF_TIMESTAMP BIT(5) /* Use timestamp based offloading */ #define FLEXCAN_QUIRK_BROKEN_PERR_STATE BIT(6) /* No interrupt for error passive */ +#define FLEXCAN_QUIRK_DEFAULT_BIG_ENDIAN BIT(7) /* default to BE register access */
/* Structure of the message buffer */ struct flexcan_mb { @@ -287,6 +288,12 @@ struct flexcan_priv { };
static const struct flexcan_devtype_data fsl_p1010_devtype_data = { + .quirks = FLEXCAN_QUIRK_BROKEN_WERR_STATE | + FLEXCAN_QUIRK_BROKEN_PERR_STATE | + FLEXCAN_QUIRK_DEFAULT_BIG_ENDIAN, +}; + +static const struct flexcan_devtype_data fsl_imx25_devtype_data = { .quirks = FLEXCAN_QUIRK_BROKEN_WERR_STATE | FLEXCAN_QUIRK_BROKEN_PERR_STATE, }; @@ -1251,9 +1258,9 @@ static void unregister_flexcandev(struct net_device *dev) static const struct of_device_id flexcan_of_match[] = { { .compatible = "fsl,imx6q-flexcan", .data = &fsl_imx6q_devtype_data, }, { .compatible = "fsl,imx28-flexcan", .data = &fsl_imx28_devtype_data, }, - { .compatible = "fsl,imx53-flexcan", .data = &fsl_p1010_devtype_data, }, - { .compatible = "fsl,imx35-flexcan", .data = &fsl_p1010_devtype_data, }, - { .compatible = "fsl,imx25-flexcan", .data = &fsl_p1010_devtype_data, }, + { .compatible = "fsl,imx53-flexcan", .data = &fsl_imx25_devtype_data, }, + { .compatible = "fsl,imx35-flexcan", .data = &fsl_imx25_devtype_data, }, + { .compatible = "fsl,imx25-flexcan", .data = &fsl_imx25_devtype_data, }, { .compatible = "fsl,p1010-flexcan", .data = &fsl_p1010_devtype_data, }, { .compatible = "fsl,vf610-flexcan", .data = &fsl_vf610_devtype_data, }, { .compatible = "fsl,ls1021ar2-flexcan", .data = &fsl_ls1021a_r2_devtype_data, }, @@ -1337,18 +1344,13 @@ static int flexcan_probe(struct platform_device *pdev)
priv = netdev_priv(dev);
- if (of_property_read_bool(pdev->dev.of_node, "big-endian")) { + if (of_property_read_bool(pdev->dev.of_node, "big-endian") || + devtype_data->quirks & FLEXCAN_QUIRK_DEFAULT_BIG_ENDIAN) { priv->read = flexcan_read_be; priv->write = flexcan_write_be; } else { - if (of_device_is_compatible(pdev->dev.of_node, - "fsl,p1010-flexcan")) { - priv->read = flexcan_read_be; - priv->write = flexcan_write_be; - } else { - priv->read = flexcan_read_le; - priv->write = flexcan_write_le; - } + priv->read = flexcan_read_le; + priv->write = flexcan_write_le; }
priv->can.clock.freq = clock_freq;