On Wed Dec 18 19, Dan Williams wrote:
On Wed, Dec 18, 2019 at 3:07 PM Jarkko Sakkinen jarkko.sakkinen@linux.intel.com wrote:
On Tue, 2019-12-17 at 10:18 -0700, Jerry Snitselaar wrote:
On Tue Dec 17 19, Jarkko Sakkinen wrote:
On Mon, 2019-12-16 at 18:14 -0800, Dan Williams wrote:
On Mon, Dec 16, 2019 at 6:00 PM Jerry Snitselaar jsnitsel@redhat.com wrote:
On Mon Dec 16 19, Dan Williams wrote: > On Mon, Dec 16, 2019 at 4:59 PM Jarkko Sakkinen > jarkko.sakkinen@linux.intel.com wrote: > > On Wed, 2019-12-11 at 16:54 -0700, Jerry Snitselaar wrote: > > > Instead of repeatedly calling tpm_chip_start/tpm_chip_stop when > > > issuing commands to the tpm during initialization, just reserve the > > > chip after wait_startup, and release it when we are ready to call > > > tpm_chip_register. > > > > > > Cc: Christian Bundy christianbundy@fraction.io > > > Cc: Dan Williams dan.j.williams@intel.com > > > Cc: Peter Huewe peterhuewe@gmx.de > > > Cc: Jarkko Sakkinen jarkko.sakkinen@linux.intel.com > > > Cc: Jason Gunthorpe jgg@ziepe.ca > > > Cc: Stefan Berger stefanb@linux.vnet.ibm.com > > > Cc: stable@vger.kernel.org > > > Cc: linux-integrity@vger.kernel.org > > > Fixes: a3fbfae82b4c ("tpm: take TPM chip power gating out of tpm_transmit()") > > > Fixes: 5b359c7c4372 ("tpm_tis_core: Turn on the TPM before probing IRQ's") > > > Signed-off-by: Jerry Snitselaar jsnitsel@redhat.com > > > > I pushed to my master with minor tweaks and added my tags. > > > > Please check before I put it to linux-next. > > I don't see it yet here: > > http://git.infradead.org/users/jjs/linux-tpmdd.git/shortlog/refs/heads/maste... > > However, I wanted to make sure you captured that this does *not* fix > the interrupt issue. I.e. make sure you remove the "Fixes: > 5b359c7c4372 ("tpm_tis_core: Turn on the TPM before probing IRQ's")" > tag. > > With that said, are you going to include the revert of: > > 1ea32c83c699 tpm_tis_core: Set TPM_CHIP_FLAG_IRQ before probing for interrupts
Dan, with the above reverted do you still get the screaming interrupt?
Yes, the screaming interrupt goes away, although it is replaced by these messages when the driver starts:
[ 3.725131] tpm_tis IFX0740:00: 2.0 TPM (device-id 0x1B, rev-id 16) [ 3.725358] tpm tpm0: tpm_try_transmit: send(): error -5 [ 3.725359] tpm tpm0: [Firmware Bug]: TPM interrupt not working, polling instead
If the choice is "error message + polled-mode" vs "pinning a cpu with interrupts" I'd accept the former, but wanted Jarkko with his maintainer hat to weigh in.
Is there a simple sanity check I can run to see if the TPM is still operational in this state?
What about T490S?
/Jarkko
Hi Jarkko, I'm waiting to hear back from the t490s user, but I imagine it still has the problem as well.
Christian, were you able to try this patch and verify it still resolves the issue you were having with the kernel failing to get the timeouts and durations from the tpm?
Including those reverts would be a bogus change at this point.
I'm failing to see how you arrived at that conclusion.
The fix that I already applied obviously fixes an issue even if it does not fix all the issues.
These patches take a usable system and make it unusable:
1ea32c83c699 tpm_tis_core: Set TPM_CHIP_FLAG_IRQ before probing for interrupts 5b359c7c4372 tpm_tis_core: Turn on the TPM before probing IRQ's
...they need to be reverted, or the regression needs to be fixed, but asserting that you fixed something else unrelated does not help.
Reverting 1ea32c83c699 ("tpm_tis_core: Set TPM_CHIP_FLAG_IRQ before probing for interrupts") would at least allow people impacted by this to boot their systems without disabling the tpm, or blacklisting the module while we figure this out. From what I can tell the tpm_tis code was operating in that state since 570a36097f30 ("tpm: drop 'irq' from struct tpm_vendor_specific") until Stefan's patch.
Regards, Jerry