From: Imre Deak imre.deak@intel.com
commit 6c34bd4532a3f39952952ddc102737595729afc4 upstream.
Atm, there are no sink rate values set for DP (vs. eDP) sinks until the DPCD capabilities are successfully read from the sink. During this time intel_dp->num_common_rates is 0 which can lead to a
intel_dp->common_rates[-1] (*)
access, which is an undefined behaviour, in the following cases:
- In intel_dp_sync_state(), if the encoder is enabled without a sink connected to the encoder's connector (BIOS enabled a monitor, but the user unplugged the monitor until the driver loaded). - In intel_dp_sync_state() if the encoder is enabled with a sink connected, but for some reason the DPCD read has failed. - In intel_dp_compute_link_config() if modesetting a connector without a sink connected on it. - In intel_dp_compute_link_config() if modesetting a connector with a a sink connected on it, but before probing the connector first.
To avoid the (*) access in all the above cases, make sure that the sink rate table - and hence the common rate table - is always valid, by setting a default minimum sink rate when registering the connector before anything could use it.
I also considered setting all the DP link rates by default, so that modesetting with higher resolution modes also succeeds in the last two cases above. However in case a sink is not connected that would stop working after the first modeset, due to the LT fallback logic. So this would need more work, beyond the scope of this fix.
As I mentioned in the previous patch, I don't think the issue this patch fixes is user visible, however it is an undefined behaviour by definition and triggers a BUG() in CONFIG_UBSAN builds, hence CC:stable.
v2: Clear the default sink rates, before initializing these for eDP.
Closes: https://gitlab.freedesktop.org/drm/intel/-/issues/4297 Suggested-by: Ville Syrjälä ville.syrjala@linux.intel.com Cc: Ville Syrjälä ville.syrjala@linux.intel.com Cc: stable@vger.kernel.org Signed-off-by: Imre Deak imre.deak@intel.com Reviewed-by: Ville Syrjälä ville.syrjala@linux.intel.com Acked-by: Jani Nikula jani.nikula@intel.com Link: https://patchwork.freedesktop.org/patch/msgid/20211018143417.1452632-1-imre.... (cherry picked from commit 3f61ef9777c0ab0f03f4af0ed6fd3e5250537a8d) Signed-off-by: Rodrigo Vivi rodrigo.vivi@intel.com Signed-off-by: Greg Kroah-Hartman gregkh@linuxfoundation.org --- drivers/gpu/drm/i915/display/intel_dp.c | 11 +++++++++++ 1 file changed, 11 insertions(+)
--- a/drivers/gpu/drm/i915/display/intel_dp.c +++ b/drivers/gpu/drm/i915/display/intel_dp.c @@ -154,6 +154,12 @@ static void vlv_steal_power_sequencer(st enum pipe pipe); static void intel_dp_unset_edid(struct intel_dp *intel_dp);
+static void intel_dp_set_default_sink_rates(struct intel_dp *intel_dp) +{ + intel_dp->sink_rates[0] = 162000; + intel_dp->num_sink_rates = 1; +} + /* update sink rates from dpcd */ static void intel_dp_set_sink_rates(struct intel_dp *intel_dp) { @@ -4678,6 +4684,9 @@ intel_edp_init_dpcd(struct intel_dp *int */ intel_psr_init_dpcd(intel_dp);
+ /* Clear the default sink rates */ + intel_dp->num_sink_rates = 0; + /* Read the eDP 1.4+ supported link rates. */ if (intel_dp->edp_dpcd[0] >= DP_EDP_14) { __le16 sink_rates[DP_MAX_SUPPORTED_RATES]; @@ -7779,6 +7788,8 @@ intel_dp_init_connector(struct intel_dig return false;
intel_dp_set_source_rates(intel_dp); + intel_dp_set_default_sink_rates(intel_dp); + intel_dp_set_common_rates(intel_dp);
intel_dp->reset_link_params = true; intel_dp->pps_pipe = INVALID_PIPE;