From: Bhupesh Sharma bhupesh.sharma@linaro.org
[ Upstream commit 12dd4ebda47abd5e3907da386b6fe1d8181ad179 ]
SA8155p adp board has two USB A-type receptacles called USB-portB and USB-portC respectively.
While USB-portB is a USB High-Speed connector/interface, the USB-portC one is a USB 3.1 Super-Speed connector/interface.
Also the USB-portB is used as the USB emergency download port (for image download purposes).
Enable both the ports on the board in USB Host mode (since all the USB interfaces are brought out to USB Type A connectors).
Cc: Bjorn Andersson bjorn.andersson@linaro.org Signed-off-by: Bhupesh Sharma bhupesh.sharma@linaro.org Link: https://lore.kernel.org/r/20210627114616.717101-4-bhupesh.sharma@linaro.org Signed-off-by: Bjorn Andersson bjorn.andersson@linaro.org Signed-off-by: Sasha Levin sashal@kernel.org --- arch/arm64/boot/dts/qcom/sa8155p-adp.dts | 60 ++++++++++++++++++++---- 1 file changed, 51 insertions(+), 9 deletions(-)
diff --git a/arch/arm64/boot/dts/qcom/sa8155p-adp.dts b/arch/arm64/boot/dts/qcom/sa8155p-adp.dts index 0da7a3b8d1bf..5ae2ddc65f7e 100644 --- a/arch/arm64/boot/dts/qcom/sa8155p-adp.dts +++ b/arch/arm64/boot/dts/qcom/sa8155p-adp.dts @@ -307,10 +307,6 @@ &qupv3_id_1 { status = "okay"; };
-&tlmm { - gpio-reserved-ranges = <0 4>; -}; - &uart2 { status = "okay"; }; @@ -337,6 +333,16 @@ &ufs_mem_phy { vdda-pll-max-microamp = <18300>; };
+&usb_1 { + status = "okay"; +}; + +&usb_1_dwc3 { + dr_mode = "host"; + + pinctrl-names = "default"; + pinctrl-0 = <&usb2phy_ac_en1_default>; +};
&usb_1_hsphy { status = "okay"; @@ -346,15 +352,51 @@ &usb_1_hsphy { };
&usb_1_qmpphy { + status = "disabled"; +}; + +&usb_2 { status = "okay"; - vdda-phy-supply = <&vreg_l8c_1p2>; - vdda-pll-supply = <&vdda_usb_ss_dp_core_1>; };
-&usb_1 { +&usb_2_dwc3 { + dr_mode = "host"; + + pinctrl-names = "default"; + pinctrl-0 = <&usb2phy_ac_en2_default>; +}; + +&usb_2_hsphy { status = "okay"; + vdda-pll-supply = <&vdd_usb_hs_core>; + vdda33-supply = <&vdda_usb_hs_3p1>; + vdda18-supply = <&vdda_usb_hs_1p8>; };
-&usb_1_dwc3 { - dr_mode = "peripheral"; +&usb_2_qmpphy { + status = "okay"; + vdda-phy-supply = <&vreg_l8c_1p2>; + vdda-pll-supply = <&vdda_usb_ss_dp_core_1>; +}; + +&tlmm { + gpio-reserved-ranges = <0 4>; + + usb2phy_ac_en1_default: usb2phy_ac_en1_default { + mux { + pins = "gpio113"; + function = "usb2phy_ac"; + bias-disable; + drive-strength = <2>; + }; + }; + + usb2phy_ac_en2_default: usb2phy_ac_en2_default { + mux { + pins = "gpio123"; + function = "usb2phy_ac"; + bias-disable; + drive-strength = <2>; + }; + }; };