On Wed, Mar 20, 2024 at 01:11:39AM +0100, Christian Marangi wrote:
misc_cmd_type in exec_op have multiple problems. With commit a82990c8a409 ("mtd: rawnand: qcom: Add read/read_start ops in exec_op path") it was reworked and generalized but actually dropped the handling of the RESET_DEVICE command.
The rework itself was correct with supporting case where a single misc command is handled, but became problematic by the addition of exiting early if we didn't had an ERASE or an OP_PROGRAM_PAGE operation.
Also additional logic was added without clear explaination causing the erase command to be broken on testing it on a ipq806x nandc.
Interesting. I believe Alam tested the rework on IPQ platforms and not sure how it got missed.
Add some additional logic to restore RESET_DEVICE command handling and fix erase command.
This sounds like two independent fixes, no? Please split them into separate patches.
- Mani
Fixes: a82990c8a409 ("mtd: rawnand: qcom: Add read/read_start ops in exec_op path") Cc: stable@vger.kernel.org Signed-off-by: Christian Marangi ansuelsmth@gmail.com
drivers/mtd/nand/raw/qcom_nandc.c | 7 +++---- 1 file changed, 3 insertions(+), 4 deletions(-)
diff --git a/drivers/mtd/nand/raw/qcom_nandc.c b/drivers/mtd/nand/raw/qcom_nandc.c index b079605c84d3..b8cff9240b28 100644 --- a/drivers/mtd/nand/raw/qcom_nandc.c +++ b/drivers/mtd/nand/raw/qcom_nandc.c @@ -2815,7 +2815,7 @@ static int qcom_misc_cmd_type_exec(struct nand_chip *chip, const struct nand_sub host->cfg0_raw & ~(7 << CW_PER_PAGE)); nandc_set_reg(chip, NAND_DEV0_CFG1, host->cfg1_raw); instrs = 3;
- } else {
- } else if (q_op.cmd_reg != OP_RESET_DEVICE) { return 0; }
@@ -2830,9 +2830,8 @@ static int qcom_misc_cmd_type_exec(struct nand_chip *chip, const struct nand_sub nandc_set_reg(chip, NAND_EXEC_CMD, 1); write_reg_dma(nandc, NAND_FLASH_CMD, instrs, NAND_BAM_NEXT_SGL);
- (q_op.cmd_reg == OP_BLOCK_ERASE) ? write_reg_dma(nandc, NAND_DEV0_CFG0,
- 2, NAND_BAM_NEXT_SGL) : read_reg_dma(nandc,
- NAND_FLASH_STATUS, 1, NAND_BAM_NEXT_SGL);
- if (q_op.cmd_reg == OP_BLOCK_ERASE)
write_reg_dma(nandc, NAND_DEV0_CFG0, 2, NAND_BAM_NEXT_SGL);write_reg_dma(nandc, NAND_EXEC_CMD, 1, NAND_BAM_NEXT_SGL); read_reg_dma(nandc, NAND_FLASH_STATUS, 1, NAND_BAM_NEXT_SGL); -- 2.43.0