From: Bhavya Kapoor b-kapoor@ti.com
[ Upstream commit 566feddd2ba5e29d9ccab36d6508592ae563f275 ]
WKUP_PADCONFIG registers for wkup_uart0 and mcu_uart0 lies under wkup_pmx2 for J7200. Thus, modify pinmux for both of them.
Fixes: 3709ea7f960e ("arm64: dts: ti: k3-j7200-common-proc-board: Add uart pinmux") Signed-off-by: Bhavya Kapoor b-kapoor@ti.com Link: https://lore.kernel.org/r/20240214105846.1096733-2-b-kapoor@ti.com Signed-off-by: Vignesh Raghavendra vigneshr@ti.com Signed-off-by: Sasha Levin sashal@kernel.org --- .../boot/dts/ti/k3-j7200-common-proc-board.dts | 17 +++++++++-------- 1 file changed, 9 insertions(+), 8 deletions(-)
diff --git a/arch/arm64/boot/dts/ti/k3-j7200-common-proc-board.dts b/arch/arm64/boot/dts/ti/k3-j7200-common-proc-board.dts index cee2b4b0eb87d..53594c5fb8e8f 100644 --- a/arch/arm64/boot/dts/ti/k3-j7200-common-proc-board.dts +++ b/arch/arm64/boot/dts/ti/k3-j7200-common-proc-board.dts @@ -91,24 +91,25 @@ vdd_sd_dv: gpio-regulator-TLV71033 { };
&wkup_pmx0 { +}; + +&wkup_pmx2 { mcu_uart0_pins_default: mcu-uart0-default-pins { pinctrl-single,pins = < - J721E_WKUP_IOPAD(0xf4, PIN_INPUT, 0) /* (D20) MCU_UART0_RXD */ - J721E_WKUP_IOPAD(0xf0, PIN_OUTPUT, 0) /* (D19) MCU_UART0_TXD */ - J721E_WKUP_IOPAD(0xf8, PIN_INPUT, 0) /* (E20) MCU_UART0_CTSn */ - J721E_WKUP_IOPAD(0xfc, PIN_OUTPUT, 0) /* (E21) MCU_UART0_RTSn */ + J721E_WKUP_IOPAD(0x90, PIN_INPUT, 0) /* (E20) MCU_UART0_CTSn */ + J721E_WKUP_IOPAD(0x94, PIN_OUTPUT, 0) /* (E21) MCU_UART0_RTSn */ + J721E_WKUP_IOPAD(0x8c, PIN_INPUT, 0) /* (D20) MCU_UART0_RXD */ + J721E_WKUP_IOPAD(0x88, PIN_OUTPUT, 0) /* (D19) MCU_UART0_TXD */ >; };
wkup_uart0_pins_default: wkup-uart0-default-pins { pinctrl-single,pins = < - J721E_WKUP_IOPAD(0xb0, PIN_INPUT, 0) /* (B14) WKUP_UART0_RXD */ - J721E_WKUP_IOPAD(0xb4, PIN_OUTPUT, 0) /* (A14) WKUP_UART0_TXD */ + J721E_WKUP_IOPAD(0x48, PIN_INPUT, 0) /* (B14) WKUP_UART0_RXD */ + J721E_WKUP_IOPAD(0x4c, PIN_OUTPUT, 0) /* (A14) WKUP_UART0_TXD */ >; }; -};
-&wkup_pmx2 { mcu_cpsw_pins_default: mcu-cpsw-default-pins { pinctrl-single,pins = < J721E_WKUP_IOPAD(0x0000, PIN_OUTPUT, 0) /* MCU_RGMII1_TX_CTL */