From: Oleksij Rempel o.rempel@pengutronix.de
[ Upstream commit 9926de7315be3d606cc011a305ad9adb9e8e14c9 ]
Latest kernel will explode on the PHY interrupt config, since it depends now on allocated priv. So, run probe to allocate priv to fix it.
ar9331_switch ethernet.1:10 lan0 (uninitialized): PHY [!ahb!ethernet@1a000000!mdio!switch@10:00] driver [Qualcomm Atheros AR9331 built-in PHY] (irq=13) CPU 0 Unable to handle kernel paging request at virtual address 0000000a, epc == 8050e8a8, ra == 80504b34 ... Call Trace: [<8050e8a8>] at803x_config_intr+0x5c/0xd0 [<80504b34>] phy_request_interrupt+0xa8/0xd0 [<8050289c>] phylink_bringup_phy+0x2d8/0x3ac [<80502b68>] phylink_fwnode_phy_connect+0x118/0x130 [<8074d8ec>] dsa_slave_create+0x270/0x420 [<80743b04>] dsa_port_setup+0x12c/0x148 [<8074580c>] dsa_register_switch+0xaf0/0xcc0 [<80511344>] ar9331_sw_probe+0x370/0x388 [<8050cb78>] mdio_probe+0x44/0x70 [<804df300>] really_probe+0x200/0x424 [<804df7b4>] __driver_probe_device+0x290/0x298 [<804df810>] driver_probe_device+0x54/0xe4 [<804dfd50>] __device_attach_driver+0xe4/0x130 [<804dcb00>] bus_for_each_drv+0xb4/0xd8 [<804dfac4>] __device_attach+0x104/0x1a4 [<804ddd24>] bus_probe_device+0x48/0xc4 [<804deb44>] deferred_probe_work_func+0xf0/0x10c [<800a0ffc>] process_one_work+0x314/0x4d4 [<800a17fc>] worker_thread+0x2a4/0x354 [<800a9a54>] kthread+0x134/0x13c [<8006306c>] ret_from_kernel_thread+0x14/0x1c
Same Issue would affect some other PHYs (QCA8081, QCA9561), so fix it too.
Fixes: 3265f4218878 ("net: phy: at803x: add fiber support") Signed-off-by: Oleksij Rempel o.rempel@pengutronix.de Reviewed-by: Andrew Lunn andrew@lunn.ch Signed-off-by: David S. Miller davem@davemloft.net Signed-off-by: Sasha Levin sashal@kernel.org --- drivers/net/phy/at803x.c | 6 ++++++ 1 file changed, 6 insertions(+)
diff --git a/drivers/net/phy/at803x.c b/drivers/net/phy/at803x.c index 6a467e7817a6..59fe356942b5 100644 --- a/drivers/net/phy/at803x.c +++ b/drivers/net/phy/at803x.c @@ -2072,6 +2072,8 @@ static struct phy_driver at803x_driver[] = { /* ATHEROS AR9331 */ PHY_ID_MATCH_EXACT(ATH9331_PHY_ID), .name = "Qualcomm Atheros AR9331 built-in PHY", + .probe = at803x_probe, + .remove = at803x_remove, .suspend = at803x_suspend, .resume = at803x_resume, .flags = PHY_POLL_CABLE_TEST, @@ -2087,6 +2089,8 @@ static struct phy_driver at803x_driver[] = { /* Qualcomm Atheros QCA9561 */ PHY_ID_MATCH_EXACT(QCA9561_PHY_ID), .name = "Qualcomm Atheros QCA9561 built-in PHY", + .probe = at803x_probe, + .remove = at803x_remove, .suspend = at803x_suspend, .resume = at803x_resume, .flags = PHY_POLL_CABLE_TEST, @@ -2151,6 +2155,8 @@ static struct phy_driver at803x_driver[] = { PHY_ID_MATCH_EXACT(QCA8081_PHY_ID), .name = "Qualcomm QCA8081", .flags = PHY_POLL_CABLE_TEST, + .probe = at803x_probe, + .remove = at803x_remove, .config_intr = at803x_config_intr, .handle_interrupt = at803x_handle_interrupt, .get_tunable = at803x_get_tunable,