From: Peter Zijlstra peterz@infradead.org
commit 87c87ecd00c54ecd677798cb49ef27329e0fab41 upstream.
Current BPF codegen doesn't respect X86_FEATURE_RETPOLINE* flags and unconditionally emits a thunk call, this is sub-optimal and doesn't match the regular, compiler generated, code.
Update the i386 JIT to emit code equal to what the compiler emits for the regular kernel text (IOW. a plain THUNK call).
Update the x86_64 JIT to emit code similar to the result of compiler and kernel rewrites as according to X86_FEATURE_RETPOLINE* flags. Inlining RETPOLINE_AMD (lfence; jmp *%reg) and !RETPOLINE (jmp *%reg), while doing a THUNK call for RETPOLINE.
This removes the hard-coded retpoline thunks and shrinks the generated code. Leaving a single retpoline thunk definition in the kernel.
Signed-off-by: Peter Zijlstra (Intel) peterz@infradead.org Reviewed-by: Borislav Petkov bp@suse.de Acked-by: Alexei Starovoitov ast@kernel.org Acked-by: Josh Poimboeuf jpoimboe@redhat.com Tested-by: Alexei Starovoitov ast@kernel.org Link: https://lore.kernel.org/r/20211026120310.614772675@infradead.org [cascardo: RETPOLINE_AMD was renamed to RETPOLINE_LFENCE] Signed-off-by: Thadeu Lima de Souza Cascardo cascardo@canonical.com Signed-off-by: Greg Kroah-Hartman gregkh@linuxfoundation.org --- arch/x86/include/asm/nospec-branch.h | 59 ----------------------------------- arch/x86/net/bpf_jit_comp.c | 46 +++++++++++++-------------- arch/x86/net/bpf_jit_comp32.c | 22 +++++++++++-- 3 files changed, 41 insertions(+), 86 deletions(-)
--- a/arch/x86/include/asm/nospec-branch.h +++ b/arch/x86/include/asm/nospec-branch.h @@ -320,63 +320,4 @@ static inline void mds_idle_clear_cpu_bu
#endif /* __ASSEMBLY__ */
-/* - * Below is used in the eBPF JIT compiler and emits the byte sequence - * for the following assembly: - * - * With retpolines configured: - * - * callq do_rop - * spec_trap: - * pause - * lfence - * jmp spec_trap - * do_rop: - * mov %rcx,(%rsp) for x86_64 - * mov %edx,(%esp) for x86_32 - * retq - * - * Without retpolines configured: - * - * jmp *%rcx for x86_64 - * jmp *%edx for x86_32 - */ -#ifdef CONFIG_RETPOLINE -# ifdef CONFIG_X86_64 -# define RETPOLINE_RCX_BPF_JIT_SIZE 17 -# define RETPOLINE_RCX_BPF_JIT() \ -do { \ - EMIT1_off32(0xE8, 7); /* callq do_rop */ \ - /* spec_trap: */ \ - EMIT2(0xF3, 0x90); /* pause */ \ - EMIT3(0x0F, 0xAE, 0xE8); /* lfence */ \ - EMIT2(0xEB, 0xF9); /* jmp spec_trap */ \ - /* do_rop: */ \ - EMIT4(0x48, 0x89, 0x0C, 0x24); /* mov %rcx,(%rsp) */ \ - EMIT1(0xC3); /* retq */ \ -} while (0) -# else /* !CONFIG_X86_64 */ -# define RETPOLINE_EDX_BPF_JIT() \ -do { \ - EMIT1_off32(0xE8, 7); /* call do_rop */ \ - /* spec_trap: */ \ - EMIT2(0xF3, 0x90); /* pause */ \ - EMIT3(0x0F, 0xAE, 0xE8); /* lfence */ \ - EMIT2(0xEB, 0xF9); /* jmp spec_trap */ \ - /* do_rop: */ \ - EMIT3(0x89, 0x14, 0x24); /* mov %edx,(%esp) */ \ - EMIT1(0xC3); /* ret */ \ -} while (0) -# endif -#else /* !CONFIG_RETPOLINE */ -# ifdef CONFIG_X86_64 -# define RETPOLINE_RCX_BPF_JIT_SIZE 2 -# define RETPOLINE_RCX_BPF_JIT() \ - EMIT2(0xFF, 0xE1); /* jmp *%rcx */ -# else /* !CONFIG_X86_64 */ -# define RETPOLINE_EDX_BPF_JIT() \ - EMIT2(0xFF, 0xE2) /* jmp *%edx */ -# endif -#endif - #endif /* _ASM_X86_NOSPEC_BRANCH_H_ */ --- a/arch/x86/net/bpf_jit_comp.c +++ b/arch/x86/net/bpf_jit_comp.c @@ -387,6 +387,25 @@ int bpf_arch_text_poke(void *ip, enum bp return __bpf_arch_text_poke(ip, t, old_addr, new_addr, true); }
+#define EMIT_LFENCE() EMIT3(0x0F, 0xAE, 0xE8) + +static void emit_indirect_jump(u8 **pprog, int reg, u8 *ip) +{ + u8 *prog = *pprog; + +#ifdef CONFIG_RETPOLINE + if (cpu_feature_enabled(X86_FEATURE_RETPOLINE_LFENCE)) { + EMIT_LFENCE(); + EMIT2(0xFF, 0xE0 + reg); + } else if (cpu_feature_enabled(X86_FEATURE_RETPOLINE)) { + emit_jump(&prog, &__x86_indirect_thunk_array[reg], ip); + } else +#endif + EMIT2(0xFF, 0xE0 + reg); + + *pprog = prog; +} + /* * Generate the following code: * @@ -468,7 +487,7 @@ static void emit_bpf_tail_call_indirect( * rdi == ctx (1st arg) * rcx == prog->bpf_func + X86_TAIL_CALL_OFFSET */ - RETPOLINE_RCX_BPF_JIT(); + emit_indirect_jump(&prog, 1 /* rcx */, ip + (prog - start));
/* out: */ ctx->tail_call_indirect_label = prog - start; @@ -1185,8 +1204,7 @@ static int do_jit(struct bpf_prog *bpf_p /* speculation barrier */ case BPF_ST | BPF_NOSPEC: if (boot_cpu_has(X86_FEATURE_XMM2)) - /* Emit 'lfence' */ - EMIT3(0x0F, 0xAE, 0xE8); + EMIT_LFENCE(); break;
/* ST: *(u8*)(dst_reg + off) = imm */ @@ -2122,24 +2140,6 @@ cleanup: return ret; }
-static int emit_fallback_jump(u8 **pprog) -{ - u8 *prog = *pprog; - int err = 0; - -#ifdef CONFIG_RETPOLINE - /* Note that this assumes the the compiler uses external - * thunks for indirect calls. Both clang and GCC use the same - * naming convention for external thunks. - */ - err = emit_jump(&prog, __x86_indirect_thunk_rdx, prog); -#else - EMIT2(0xFF, 0xE2); /* jmp rdx */ -#endif - *pprog = prog; - return err; -} - static int emit_bpf_dispatcher(u8 **pprog, int a, int b, s64 *progs) { u8 *jg_reloc, *prog = *pprog; @@ -2161,9 +2161,7 @@ static int emit_bpf_dispatcher(u8 **ppro if (err) return err;
- err = emit_fallback_jump(&prog); /* jmp thunk/indirect */ - if (err) - return err; + emit_indirect_jump(&prog, 2 /* rdx */, prog);
*pprog = prog; return 0; --- a/arch/x86/net/bpf_jit_comp32.c +++ b/arch/x86/net/bpf_jit_comp32.c @@ -15,6 +15,7 @@ #include <asm/cacheflush.h> #include <asm/set_memory.h> #include <asm/nospec-branch.h> +#include <asm/asm-prototypes.h> #include <linux/bpf.h>
/* @@ -1267,6 +1268,21 @@ static void emit_epilogue(u8 **pprog, u3 *pprog = prog; }
+static int emit_jmp_edx(u8 **pprog, u8 *ip) +{ + u8 *prog = *pprog; + int cnt = 0; + +#ifdef CONFIG_RETPOLINE + EMIT1_off32(0xE9, (u8 *)__x86_indirect_thunk_edx - (ip + 5)); +#else + EMIT2(0xFF, 0xE2); +#endif + *pprog = prog; + + return cnt; +} + /* * Generate the following code: * ... bpf_tail_call(void *ctx, struct bpf_array *array, u64 index) ... @@ -1280,7 +1296,7 @@ static void emit_epilogue(u8 **pprog, u3 * goto *(prog->bpf_func + prologue_size); * out: */ -static void emit_bpf_tail_call(u8 **pprog) +static void emit_bpf_tail_call(u8 **pprog, u8 *ip) { u8 *prog = *pprog; int cnt = 0; @@ -1362,7 +1378,7 @@ static void emit_bpf_tail_call(u8 **ppro * eax == ctx (1st arg) * edx == prog->bpf_func + prologue_size */ - RETPOLINE_EDX_BPF_JIT(); + cnt += emit_jmp_edx(&prog, ip + cnt);
if (jmp_label1 == -1) jmp_label1 = cnt; @@ -2122,7 +2138,7 @@ static int do_jit(struct bpf_prog *bpf_p break; } case BPF_JMP | BPF_TAIL_CALL: - emit_bpf_tail_call(&prog); + emit_bpf_tail_call(&prog, image + addrs[i - 1]); break;
/* cond jump */