From: Primoz Fiser primoz.fiser@norik.com
[ Upstream commit 733a763dd8b3ac2858dd238a91bb3a2fdff4739e ]
The problem of having class-D initialization sequence in probe using regmap_register_patch() is that it will do hardware register writes immediately after being called as it bypasses regcache. Afterwards, in aic3x_init() we also perform codec soft reset, rendering class-D init sequence pointless. This issue is even more apparent when using reset GPIO line, since in that case class-D amplifier initialization fails with "Failed to init class D: -5" message as codec is already held in reset state after requesting the reset GPIO and hence hardware I/O fails with -EIO errno.
Thus move class-D amplifier initialization sequence from probe function to aic3x_set_power() just before the usual regcache sync. Use bypassed regmap_multi_reg_write_bypassed() function to make sure, class-D init sequence is performed in proper order as described in the datasheet.
Signed-off-by: Primoz Fiser primoz.fiser@norik.com Link: https://patch.msgid.link/20250925085929.2581749-1-primoz.fiser@norik.com Signed-off-by: Mark Brown broonie@kernel.org Signed-off-by: Sasha Levin sashal@kernel.org ---
LLM Generated explanations, may be completely bogus:
YES - Moving the class‑D init to the power‑on path ensures the sequence actually programs the codec after reset: `regmap_multi_reg_write_bypassed()` now runs immediately after regulators are enabled and the reset GPIO is deasserted (`sound/soc/codecs/tlv320aic3x.c:1394-1408`), so the class‑D block on tlv320aic3007 finally comes out of reset with the datasheet‑mandated ordering retained (`drivers/base/regmap/regmap.c:2649-2684`). - The prior implementation wrote the same register sequence during probe while the chip was still (or about to be) reset (`sound/soc/codecs/tlv320aic3x.c:1553-1559`, `sound/soc/codecs/tlv320aic3x.c:1794-1815`), yielding -EIO failures and undoing the configuration; removing that probe-time call (`sound/soc/codecs/tlv320aic3x.c:1782-1828`) eliminates the window where the codec couldn’t be addressed. - Change scope is tight: the new sequence is guarded by `aic3x->model == AIC3X_MODEL_3007` and only affects the existing power/bias flow, so other aic3x variants and runtime paths remain untouched. - This clearly fixes a user-visible regression (class‑D amp never enables on systems using the reset GPIO), introduces no new APIs, and aligns with stable rules for targeted bug fixes.
Suggested next step: 1) Validate audio output on hardware carrying tlv320aic3007 with reset GPIO asserted to confirm the class‑D amplifier now powers up correctly.
sound/soc/codecs/tlv320aic3x.c | 32 ++++++++++++++------------------ 1 file changed, 14 insertions(+), 18 deletions(-)
diff --git a/sound/soc/codecs/tlv320aic3x.c b/sound/soc/codecs/tlv320aic3x.c index f1649df197389..eea8ca285f8e0 100644 --- a/sound/soc/codecs/tlv320aic3x.c +++ b/sound/soc/codecs/tlv320aic3x.c @@ -121,6 +121,16 @@ static const struct reg_default aic3x_reg[] = { { 108, 0x00 }, { 109, 0x00 }, };
+static const struct reg_sequence aic3007_class_d[] = { + /* Class-D speaker driver init; datasheet p. 46 */ + { AIC3X_PAGE_SELECT, 0x0D }, + { 0xD, 0x0D }, + { 0x8, 0x5C }, + { 0x8, 0x5D }, + { 0x8, 0x5C }, + { AIC3X_PAGE_SELECT, 0x00 }, +}; + static bool aic3x_volatile_reg(struct device *dev, unsigned int reg) { switch (reg) { @@ -1393,6 +1403,10 @@ static int aic3x_set_power(struct snd_soc_component *component, int power) gpiod_set_value(aic3x->gpio_reset, 0); }
+ if (aic3x->model == AIC3X_MODEL_3007) + regmap_multi_reg_write_bypassed(aic3x->regmap, aic3007_class_d, + ARRAY_SIZE(aic3007_class_d)); + /* Sync reg_cache with the hardware */ regcache_cache_only(aic3x->regmap, false); regcache_sync(aic3x->regmap); @@ -1723,17 +1737,6 @@ static void aic3x_configure_ocmv(struct device *dev, struct aic3x_priv *aic3x) } }
- -static const struct reg_sequence aic3007_class_d[] = { - /* Class-D speaker driver init; datasheet p. 46 */ - { AIC3X_PAGE_SELECT, 0x0D }, - { 0xD, 0x0D }, - { 0x8, 0x5C }, - { 0x8, 0x5D }, - { 0x8, 0x5C }, - { AIC3X_PAGE_SELECT, 0x00 }, -}; - int aic3x_probe(struct device *dev, struct regmap *regmap, kernel_ulong_t driver_data) { struct aic3x_priv *aic3x; @@ -1823,13 +1826,6 @@ int aic3x_probe(struct device *dev, struct regmap *regmap, kernel_ulong_t driver
aic3x_configure_ocmv(dev, aic3x);
- if (aic3x->model == AIC3X_MODEL_3007) { - ret = regmap_register_patch(aic3x->regmap, aic3007_class_d, - ARRAY_SIZE(aic3007_class_d)); - if (ret != 0) - dev_err(dev, "Failed to init class D: %d\n", ret); - } - ret = devm_snd_soc_register_component(dev, &soc_component_dev_aic3x, &aic3x_dai, 1); if (ret) return ret;