From: Luca Ceresoli luca@lucaceresoli.net
[ Upstream commit 484a58607a808c3721917f5ca5fba7eff809e4df ]
The current code produces an error message on devm_gpiod_get() errors even when the error is -EPROBE_DEFER, which should be silent.
This has been observed producing a significant amount of messages like:
xlnx-slave-spi spi1.1: Failed to get PROGRAM_B gpio: -517
Fix and simplify code by using the dev_err_probe() helper function.
Signed-off-by: Luca Ceresoli luca@lucaceresoli.net Fixes: dd2784c01d93 ("fpga manager: xilinx-spi: check INIT_B pin during write_init") Fixes: 061c97d13f1a ("fpga manager: Add Xilinx slave serial SPI driver") Signed-off-by: Moritz Fischer mdf@kernel.org Signed-off-by: Sasha Levin sashal@kernel.org --- drivers/fpga/xilinx-spi.c | 24 +++++++++--------------- 1 file changed, 9 insertions(+), 15 deletions(-)
diff --git a/drivers/fpga/xilinx-spi.c b/drivers/fpga/xilinx-spi.c index 27defa98092d..fee4d0abf6bf 100644 --- a/drivers/fpga/xilinx-spi.c +++ b/drivers/fpga/xilinx-spi.c @@ -233,25 +233,19 @@ static int xilinx_spi_probe(struct spi_device *spi)
/* PROGRAM_B is active low */ conf->prog_b = devm_gpiod_get(&spi->dev, "prog_b", GPIOD_OUT_LOW); - if (IS_ERR(conf->prog_b)) { - dev_err(&spi->dev, "Failed to get PROGRAM_B gpio: %ld\n", - PTR_ERR(conf->prog_b)); - return PTR_ERR(conf->prog_b); - } + if (IS_ERR(conf->prog_b)) + return dev_err_probe(&spi->dev, PTR_ERR(conf->prog_b), + "Failed to get PROGRAM_B gpio\n");
conf->init_b = devm_gpiod_get_optional(&spi->dev, "init-b", GPIOD_IN); - if (IS_ERR(conf->init_b)) { - dev_err(&spi->dev, "Failed to get INIT_B gpio: %ld\n", - PTR_ERR(conf->init_b)); - return PTR_ERR(conf->init_b); - } + if (IS_ERR(conf->init_b)) + return dev_err_probe(&spi->dev, PTR_ERR(conf->init_b), + "Failed to get INIT_B gpio\n");
conf->done = devm_gpiod_get(&spi->dev, "done", GPIOD_IN); - if (IS_ERR(conf->done)) { - dev_err(&spi->dev, "Failed to get DONE gpio: %ld\n", - PTR_ERR(conf->done)); - return PTR_ERR(conf->done); - } + if (IS_ERR(conf->done)) + return dev_err_probe(&spi->dev, PTR_ERR(conf->done), + "Failed to get DONE gpio\n");
mgr = devm_fpga_mgr_create(&spi->dev, "Xilinx Slave Serial FPGA Manager",