4.14-stable review patch. If anyone has any objections, please let me know.
------------------
From: Eric Anholt eric@anholt.net
commit fe32a815f05c8568669a062587435e15f9345764 upstream.
We were leaving them in the power on state (or the state the firmware had set up for some client, if we were taking over from them). The boot state was 30 core clocks, when we actually want to sample some time after (to make sure that the new input bit has actually arrived).
Signed-off-by: Eric Anholt eric@anholt.net Signed-off-by: Boris Brezillon boris.brezillon@bootlin.com Signed-off-by: Wolfram Sang wsa@the-dreams.de Cc: stable@kernel.org Signed-off-by: Greg Kroah-Hartman gregkh@linuxfoundation.org
--- drivers/i2c/busses/i2c-bcm2835.c | 21 ++++++++++++++++++++- 1 file changed, 20 insertions(+), 1 deletion(-)
--- a/drivers/i2c/busses/i2c-bcm2835.c +++ b/drivers/i2c/busses/i2c-bcm2835.c @@ -50,6 +50,9 @@ #define BCM2835_I2C_S_CLKT BIT(9) #define BCM2835_I2C_S_LEN BIT(10) /* Fake bit for SW error reporting */
+#define BCM2835_I2C_FEDL_SHIFT 16 +#define BCM2835_I2C_REDL_SHIFT 0 + #define BCM2835_I2C_CDIV_MIN 0x0002 #define BCM2835_I2C_CDIV_MAX 0xFFFE
@@ -81,7 +84,7 @@ static inline u32 bcm2835_i2c_readl(stru
static int bcm2835_i2c_set_divider(struct bcm2835_i2c_dev *i2c_dev) { - u32 divider; + u32 divider, redl, fedl;
divider = DIV_ROUND_UP(clk_get_rate(i2c_dev->clk), i2c_dev->bus_clk_rate); @@ -100,6 +103,22 @@ static int bcm2835_i2c_set_divider(struc
bcm2835_i2c_writel(i2c_dev, BCM2835_I2C_DIV, divider);
+ /* + * Number of core clocks to wait after falling edge before + * outputting the next data bit. Note that both FEDL and REDL + * can't be greater than CDIV/2. + */ + fedl = max(divider / 16, 1u); + + /* + * Number of core clocks to wait after rising edge before + * sampling the next incoming data bit. + */ + redl = max(divider / 4, 1u); + + bcm2835_i2c_writel(i2c_dev, BCM2835_I2C_DEL, + (fedl << BCM2835_I2C_FEDL_SHIFT) | + (redl << BCM2835_I2C_REDL_SHIFT)); return 0; }