From: Oleksandr Suvorov oleksandr.suvorov@toradex.com
commit 2773fe1d31c42ffae2a9cb9a6055d99dd86e2fee upstream.
SD/MMC on Colibri iMX7S/D modules successfully support 200Mhz frequency in HS200 mode.
Removing the unnecessary max-frequency limit significantly increases the performance:
== before fix ==== root@colibri-imx7-emmc:~# hdparm -t /dev/mmcblk0 /dev/mmcblk0: Timing buffered disk reads: 252 MB in 3.02 seconds = 83.54 MB/sec ==================
=== after fix ==== root@colibri-imx7-emmc:~# hdparm -t /dev/mmcblk0 /dev/mmcblk0: Timing buffered disk reads: 408 MB in 3.00 seconds = 135.94 MB/sec ==================
Fixes: f928a4a377e4 ("ARM: dts: imx7: add Toradex Colibri iMX7D 1GB (eMMC) support") Signed-off-by: Oleksandr Suvorov oleksandr.suvorov@toradex.com Reviewed-by: Fabio Estevam festevam@gmail.com Signed-off-by: Shawn Guo shawnguo@kernel.org Signed-off-by: Greg Kroah-Hartman gregkh@linuxfoundation.org
--- arch/arm/boot/dts/imx7-colibri.dtsi | 1 - 1 file changed, 1 deletion(-)
--- a/arch/arm/boot/dts/imx7-colibri.dtsi +++ b/arch/arm/boot/dts/imx7-colibri.dtsi @@ -336,7 +336,6 @@ assigned-clock-rates = <400000000>; bus-width = <8>; fsl,tuning-step = <2>; - max-frequency = <100000000>; vmmc-supply = <®_module_3v3>; vqmmc-supply = <®_DCDC3>; non-removable;