The patch below does not apply to the 5.13-stable tree. If someone wants it applied there, or to any other stable or longterm tree, then please email the backport, including the original git commit id to stable@vger.kernel.org.
thanks,
greg k-h
------------------ original commit in Linus's tree ------------------
From 3134cc8beb69d0db9de651081707c4651c011621 Mon Sep 17 00:00:00 2001
From: Marc Zyngier maz@kernel.org Date: Thu, 19 Aug 2021 19:03:05 +0100 Subject: [PATCH] KVM: arm64: vgic: Resample HW pending state on deactivation
When a mapped level interrupt (a timer, for example) is deactivated by the guest, the corresponding host interrupt is equally deactivated. However, the fate of the pending state still needs to be dealt with in SW.
This is specially true when the interrupt was in the active+pending state in the virtual distributor at the point where the guest was entered. On exit, the pending state is potentially stale (the guest may have put the interrupt in a non-pending state).
If we don't do anything, the interrupt will be spuriously injected in the guest. Although this shouldn't have any ill effect (spurious interrupts are always possible), we can improve the emulation by detecting the deactivation-while-pending case and resample the interrupt.
While we're at it, move the logic into a common helper that can be shared between the two GIC implementations.
Fixes: e40cc57bac79 ("KVM: arm/arm64: vgic: Support level-triggered mapped interrupts") Reported-by: Raghavendra Rao Ananta rananta@google.com Tested-by: Raghavendra Rao Ananta rananta@google.com Reviewed-by: Oliver Upton oupton@google.com Signed-off-by: Marc Zyngier maz@kernel.org Cc: stable@vger.kernel.org Link: https://lore.kernel.org/r/20210819180305.1670525-1-maz@kernel.org
diff --git a/arch/arm64/kvm/vgic/vgic-v2.c b/arch/arm64/kvm/vgic/vgic-v2.c index 2c580204f1dc..95a18cec14a3 100644 --- a/arch/arm64/kvm/vgic/vgic-v2.c +++ b/arch/arm64/kvm/vgic/vgic-v2.c @@ -60,6 +60,7 @@ void vgic_v2_fold_lr_state(struct kvm_vcpu *vcpu) u32 val = cpuif->vgic_lr[lr]; u32 cpuid, intid = val & GICH_LR_VIRTUALID; struct vgic_irq *irq; + bool deactivated;
/* Extract the source vCPU id from the LR */ cpuid = val & GICH_LR_PHYSID_CPUID; @@ -75,7 +76,8 @@ void vgic_v2_fold_lr_state(struct kvm_vcpu *vcpu)
raw_spin_lock(&irq->irq_lock);
- /* Always preserve the active bit */ + /* Always preserve the active bit, note deactivation */ + deactivated = irq->active && !(val & GICH_LR_ACTIVE_BIT); irq->active = !!(val & GICH_LR_ACTIVE_BIT);
if (irq->active && vgic_irq_is_sgi(intid)) @@ -96,36 +98,8 @@ void vgic_v2_fold_lr_state(struct kvm_vcpu *vcpu) if (irq->config == VGIC_CONFIG_LEVEL && !(val & GICH_LR_STATE)) irq->pending_latch = false;
- /* - * Level-triggered mapped IRQs are special because we only - * observe rising edges as input to the VGIC. - * - * If the guest never acked the interrupt we have to sample - * the physical line and set the line level, because the - * device state could have changed or we simply need to - * process the still pending interrupt later. - * - * If this causes us to lower the level, we have to also clear - * the physical active state, since we will otherwise never be - * told when the interrupt becomes asserted again. - * - * Another case is when the interrupt requires a helping hand - * on deactivation (no HW deactivation, for example). - */ - if (vgic_irq_is_mapped_level(irq)) { - bool resample = false; - - if (val & GICH_LR_PENDING_BIT) { - irq->line_level = vgic_get_phys_line_level(irq); - resample = !irq->line_level; - } else if (vgic_irq_needs_resampling(irq) && - !(irq->active || irq->pending_latch)) { - resample = true; - } - - if (resample) - vgic_irq_set_phys_active(irq, false); - } + /* Handle resampling for mapped interrupts if required */ + vgic_irq_handle_resampling(irq, deactivated, val & GICH_LR_PENDING_BIT);
raw_spin_unlock(&irq->irq_lock); vgic_put_irq(vcpu->kvm, irq); diff --git a/arch/arm64/kvm/vgic/vgic-v3.c b/arch/arm64/kvm/vgic/vgic-v3.c index 66004f61cd83..21a6207fb2ee 100644 --- a/arch/arm64/kvm/vgic/vgic-v3.c +++ b/arch/arm64/kvm/vgic/vgic-v3.c @@ -46,6 +46,7 @@ void vgic_v3_fold_lr_state(struct kvm_vcpu *vcpu) u32 intid, cpuid; struct vgic_irq *irq; bool is_v2_sgi = false; + bool deactivated;
cpuid = val & GICH_LR_PHYSID_CPUID; cpuid >>= GICH_LR_PHYSID_CPUID_SHIFT; @@ -68,7 +69,8 @@ void vgic_v3_fold_lr_state(struct kvm_vcpu *vcpu)
raw_spin_lock(&irq->irq_lock);
- /* Always preserve the active bit */ + /* Always preserve the active bit, note deactivation */ + deactivated = irq->active && !(val & ICH_LR_ACTIVE_BIT); irq->active = !!(val & ICH_LR_ACTIVE_BIT);
if (irq->active && is_v2_sgi) @@ -89,36 +91,8 @@ void vgic_v3_fold_lr_state(struct kvm_vcpu *vcpu) if (irq->config == VGIC_CONFIG_LEVEL && !(val & ICH_LR_STATE)) irq->pending_latch = false;
- /* - * Level-triggered mapped IRQs are special because we only - * observe rising edges as input to the VGIC. - * - * If the guest never acked the interrupt we have to sample - * the physical line and set the line level, because the - * device state could have changed or we simply need to - * process the still pending interrupt later. - * - * If this causes us to lower the level, we have to also clear - * the physical active state, since we will otherwise never be - * told when the interrupt becomes asserted again. - * - * Another case is when the interrupt requires a helping hand - * on deactivation (no HW deactivation, for example). - */ - if (vgic_irq_is_mapped_level(irq)) { - bool resample = false; - - if (val & ICH_LR_PENDING_BIT) { - irq->line_level = vgic_get_phys_line_level(irq); - resample = !irq->line_level; - } else if (vgic_irq_needs_resampling(irq) && - !(irq->active || irq->pending_latch)) { - resample = true; - } - - if (resample) - vgic_irq_set_phys_active(irq, false); - } + /* Handle resampling for mapped interrupts if required */ + vgic_irq_handle_resampling(irq, deactivated, val & ICH_LR_PENDING_BIT);
raw_spin_unlock(&irq->irq_lock); vgic_put_irq(vcpu->kvm, irq); diff --git a/arch/arm64/kvm/vgic/vgic.c b/arch/arm64/kvm/vgic/vgic.c index 81cec508d413..5dad4996cfb2 100644 --- a/arch/arm64/kvm/vgic/vgic.c +++ b/arch/arm64/kvm/vgic/vgic.c @@ -1021,3 +1021,41 @@ bool kvm_vgic_map_is_active(struct kvm_vcpu *vcpu, unsigned int vintid)
return map_is_active; } + +/* + * Level-triggered mapped IRQs are special because we only observe rising + * edges as input to the VGIC. + * + * If the guest never acked the interrupt we have to sample the physical + * line and set the line level, because the device state could have changed + * or we simply need to process the still pending interrupt later. + * + * We could also have entered the guest with the interrupt active+pending. + * On the next exit, we need to re-evaluate the pending state, as it could + * otherwise result in a spurious interrupt by injecting a now potentially + * stale pending state. + * + * If this causes us to lower the level, we have to also clear the physical + * active state, since we will otherwise never be told when the interrupt + * becomes asserted again. + * + * Another case is when the interrupt requires a helping hand on + * deactivation (no HW deactivation, for example). + */ +void vgic_irq_handle_resampling(struct vgic_irq *irq, + bool lr_deactivated, bool lr_pending) +{ + if (vgic_irq_is_mapped_level(irq)) { + bool resample = false; + + if (unlikely(vgic_irq_needs_resampling(irq))) { + resample = !(irq->active || irq->pending_latch); + } else if (lr_pending || (lr_deactivated && irq->line_level)) { + irq->line_level = vgic_get_phys_line_level(irq); + resample = !irq->line_level; + } + + if (resample) + vgic_irq_set_phys_active(irq, false); + } +} diff --git a/arch/arm64/kvm/vgic/vgic.h b/arch/arm64/kvm/vgic/vgic.h index dc1f3d1657ee..14a9218641f5 100644 --- a/arch/arm64/kvm/vgic/vgic.h +++ b/arch/arm64/kvm/vgic/vgic.h @@ -169,6 +169,8 @@ void vgic_irq_set_phys_active(struct vgic_irq *irq, bool active); bool vgic_queue_irq_unlock(struct kvm *kvm, struct vgic_irq *irq, unsigned long flags); void vgic_kick_vcpus(struct kvm *kvm); +void vgic_irq_handle_resampling(struct vgic_irq *irq, + bool lr_deactivated, bool lr_pending);
int vgic_check_ioaddr(struct kvm *kvm, phys_addr_t *ioaddr, phys_addr_t addr, phys_addr_t alignment);