From: Sandeep Singh sandeep.singh@amd.com
On some platform of AMD, S3 fails with HCE and SRE errors. To fix this, need to disable a bit which is enable in sparse controller.
Signed-off-by: Sanket Goswami Sanket.Goswami@amd.com Signed-off-by: Sandeep Singh sandeep.singh@amd.com Cc: stable@vger.kernel.org#v4.19+ Signed-off-by: Mathias Nyman mathias.nyman@linux.intel.com --- drivers/usb/host/xhci-pci.c | 17 +++++++++++++++++ drivers/usb/host/xhci.h | 1 + 2 files changed, 18 insertions(+)
diff --git a/drivers/usb/host/xhci-pci.c b/drivers/usb/host/xhci-pci.c index c26c06e5c88c..bf89172c43ca 100644 --- a/drivers/usb/host/xhci-pci.c +++ b/drivers/usb/host/xhci-pci.c @@ -23,6 +23,8 @@ #define SSIC_PORT_CFG2_OFFSET 0x30 #define PROG_DONE (1 << 30) #define SSIC_PORT_UNUSED (1 << 31) +#define SPARSE_DISABLE_BIT 17 +#define SPARSE_CNTL_ENABLE 0xC12C
/* Device for a quirk */ #define PCI_VENDOR_ID_FRESCO_LOGIC 0x1b73 @@ -161,6 +163,9 @@ static void xhci_pci_quirks(struct device *dev, struct xhci_hcd *xhci) (pdev->device == 0x15e0 || pdev->device == 0x15e1)) xhci->quirks |= XHCI_SNPS_BROKEN_SUSPEND;
+ if (pdev->vendor == PCI_VENDOR_ID_AMD && pdev->device == 0x15e5) + xhci->quirks |= XHCI_DISABLE_SPARSE; + if (pdev->vendor == PCI_VENDOR_ID_AMD) xhci->quirks |= XHCI_TRUST_TX_LENGTH;
@@ -498,6 +503,15 @@ static void xhci_pme_quirk(struct usb_hcd *hcd) readl(reg); }
+static void xhci_sparse_control_quirk(struct usb_hcd *hcd) +{ + u32 reg; + + reg = readl(hcd->regs + SPARSE_CNTL_ENABLE); + reg &= ~BIT(SPARSE_DISABLE_BIT); + writel(reg, hcd->regs + SPARSE_CNTL_ENABLE); +} + static int xhci_pci_suspend(struct usb_hcd *hcd, bool do_wakeup) { struct xhci_hcd *xhci = hcd_to_xhci(hcd); @@ -517,6 +531,9 @@ static int xhci_pci_suspend(struct usb_hcd *hcd, bool do_wakeup) if (xhci->quirks & XHCI_SSIC_PORT_UNUSED) xhci_ssic_port_unused_quirk(hcd, true);
+ if (xhci->quirks & XHCI_DISABLE_SPARSE) + xhci_sparse_control_quirk(hcd); + ret = xhci_suspend(xhci, do_wakeup); if (ret && (xhci->quirks & XHCI_SSIC_PORT_UNUSED)) xhci_ssic_port_unused_quirk(hcd, false); diff --git a/drivers/usb/host/xhci.h b/drivers/usb/host/xhci.h index 8be88379c0fb..ebb359ebb261 100644 --- a/drivers/usb/host/xhci.h +++ b/drivers/usb/host/xhci.h @@ -1877,6 +1877,7 @@ struct xhci_hcd { #define XHCI_SNPS_BROKEN_SUSPEND BIT_ULL(35) #define XHCI_RENESAS_FW_QUIRK BIT_ULL(36) #define XHCI_SKIP_PHY_INIT BIT_ULL(37) +#define XHCI_DISABLE_SPARSE BIT_ULL(38)
unsigned int num_active_eps; unsigned int limit_active_eps;