6.8-stable review patch. If anyone has any objections, please let me know.
------------------
From: Daniel Okazaki dtokazaki@google.com
commit f42c97027fb75776e2e9358d16bf4a99aeb04cf2 upstream.
If the eeprom is not accessible, an nvmem device will be registered, the read will fail, and the device will be torn down. If another driver accesses the nvmem device after the teardown, it will reference invalid memory.
Move the failure point before registering the nvmem device.
Signed-off-by: Daniel Okazaki dtokazaki@google.com Fixes: b20eb4c1f026 ("eeprom: at24: drop unnecessary label") Cc: stable@vger.kernel.org Link: https://lore.kernel.org/r/20240422174337.2487142-1-dtokazaki@google.com Signed-off-by: Bartosz Golaszewski bartosz.golaszewski@linaro.org Signed-off-by: Greg Kroah-Hartman gregkh@linuxfoundation.org --- drivers/misc/eeprom/at24.c | 18 +++++++++--------- 1 file changed, 9 insertions(+), 9 deletions(-)
--- a/drivers/misc/eeprom/at24.c +++ b/drivers/misc/eeprom/at24.c @@ -758,15 +758,6 @@ static int at24_probe(struct i2c_client } pm_runtime_enable(dev);
- at24->nvmem = devm_nvmem_register(dev, &nvmem_config); - if (IS_ERR(at24->nvmem)) { - pm_runtime_disable(dev); - if (!pm_runtime_status_suspended(dev)) - regulator_disable(at24->vcc_reg); - return dev_err_probe(dev, PTR_ERR(at24->nvmem), - "failed to register nvmem\n"); - } - /* * Perform a one-byte test read to verify that the chip is functional, * unless powering on the device is to be avoided during probe (i.e. @@ -782,6 +773,15 @@ static int at24_probe(struct i2c_client } }
+ at24->nvmem = devm_nvmem_register(dev, &nvmem_config); + if (IS_ERR(at24->nvmem)) { + pm_runtime_disable(dev); + if (!pm_runtime_status_suspended(dev)) + regulator_disable(at24->vcc_reg); + return dev_err_probe(dev, PTR_ERR(at24->nvmem), + "failed to register nvmem\n"); + } + /* If this a SPD EEPROM, probe for DDR3 thermal sensor */ if (cdata == &at24_data_spd) at24_probe_temp_sensor(client);