Both the imx and stm32 driver set the rx-during-tx GPIO in rs485_config(). Since this function is called with the port lock held, this can be a problem in case that setting the GPIO line can sleep (e.g. if a GPIO expander is used which is connected via SPI or I2C).
Avoid this issue by moving the GPIO setting outside of the port lock into the serial core and thus making it a generic feature.
Also with commit c54d48543689 ("serial: stm32: Add support for rs485 RX_DURING_TX output GPIO") the SER_RS485_RX_DURING_TX flag is only set if a rx-during-tx GPIO is _not_ available, which is wrong. Fix this, too.
Furthermore reset old GPIO settings in case that changing the RS485 configuration failed.
Fixes: c54d48543689 ("serial: stm32: Add support for rs485 RX_DURING_TX output GPIO") Fixes: ca530cfa968c ("serial: imx: Add support for RS485 RX_DURING_TX output GPIO") Cc: Shawn Guo shawnguo@kernel.org Cc: Sascha Hauer s.hauer@pengutronix.de Cc: stable@vger.kernel.org Signed-off-by: Lino Sanfilippo l.sanfilippo@kunbus.com Link: https://lore.kernel.org/r/20240103061818.564-2-l.sanfilippo@kunbus.com Signed-off-by: Greg Kroah-Hartman gregkh@linuxfoundation.org (cherry picked from commit 07c30ea5861fb26a77dade8cdc787252f6122fb1) Signed-off-by: Lino Sanfilippo l.sanfilippo@kunbus.com --- drivers/tty/serial/imx.c | 4 ---- drivers/tty/serial/serial_core.c | 26 ++++++++++++++++++++++++-- drivers/tty/serial/stm32-usart.c | 8 ++------ 3 files changed, 26 insertions(+), 12 deletions(-)
diff --git a/drivers/tty/serial/imx.c b/drivers/tty/serial/imx.c index 13cb78340709..edb2ec6a5567 100644 --- a/drivers/tty/serial/imx.c +++ b/drivers/tty/serial/imx.c @@ -1947,10 +1947,6 @@ static int imx_uart_rs485_config(struct uart_port *port, struct ktermios *termio rs485conf->flags & SER_RS485_RX_DURING_TX) imx_uart_start_rx(port);
- if (port->rs485_rx_during_tx_gpio) - gpiod_set_value_cansleep(port->rs485_rx_during_tx_gpio, - !!(rs485conf->flags & SER_RS485_RX_DURING_TX)); - return 0; }
diff --git a/drivers/tty/serial/serial_core.c b/drivers/tty/serial/serial_core.c index f912f8bf1e63..6b43ee96f326 100644 --- a/drivers/tty/serial/serial_core.c +++ b/drivers/tty/serial/serial_core.c @@ -1401,6 +1401,16 @@ static void uart_set_rs485_termination(struct uart_port *port, !!(rs485->flags & SER_RS485_TERMINATE_BUS)); }
+static void uart_set_rs485_rx_during_tx(struct uart_port *port, + const struct serial_rs485 *rs485) +{ + if (!(rs485->flags & SER_RS485_ENABLED)) + return; + + gpiod_set_value_cansleep(port->rs485_rx_during_tx_gpio, + !!(rs485->flags & SER_RS485_RX_DURING_TX)); +} + static int uart_rs485_config(struct uart_port *port) { struct serial_rs485 *rs485 = &port->rs485; @@ -1412,12 +1422,17 @@ static int uart_rs485_config(struct uart_port *port)
uart_sanitize_serial_rs485(port, rs485); uart_set_rs485_termination(port, rs485); + uart_set_rs485_rx_during_tx(port, rs485);
spin_lock_irqsave(&port->lock, flags); ret = port->rs485_config(port, NULL, rs485); spin_unlock_irqrestore(&port->lock, flags); - if (ret) + if (ret) { memset(rs485, 0, sizeof(*rs485)); + /* unset GPIOs */ + gpiod_set_value_cansleep(port->rs485_term_gpio, 0); + gpiod_set_value_cansleep(port->rs485_rx_during_tx_gpio, 0); + }
return ret; } @@ -1456,6 +1471,7 @@ static int uart_set_rs485_config(struct tty_struct *tty, struct uart_port *port, return ret; uart_sanitize_serial_rs485(port, &rs485); uart_set_rs485_termination(port, &rs485); + uart_set_rs485_rx_during_tx(port, &rs485);
spin_lock_irqsave(&port->lock, flags); ret = port->rs485_config(port, &tty->termios, &rs485); @@ -1467,8 +1483,14 @@ static int uart_set_rs485_config(struct tty_struct *tty, struct uart_port *port, port->ops->set_mctrl(port, port->mctrl); } spin_unlock_irqrestore(&port->lock, flags); - if (ret) + if (ret) { + /* restore old GPIO settings */ + gpiod_set_value_cansleep(port->rs485_term_gpio, + !!(port->rs485.flags & SER_RS485_TERMINATE_BUS)); + gpiod_set_value_cansleep(port->rs485_rx_during_tx_gpio, + !!(port->rs485.flags & SER_RS485_RX_DURING_TX)); return ret; + }
if (copy_to_user(rs485_user, &port->rs485, sizeof(port->rs485))) return -EFAULT; diff --git a/drivers/tty/serial/stm32-usart.c b/drivers/tty/serial/stm32-usart.c index 5e9cf0c48813..b6f4f436a565 100644 --- a/drivers/tty/serial/stm32-usart.c +++ b/drivers/tty/serial/stm32-usart.c @@ -226,12 +226,6 @@ static int stm32_usart_config_rs485(struct uart_port *port, struct ktermios *ter
stm32_usart_clr_bits(port, ofs->cr1, BIT(cfg->uart_enable_bit));
- if (port->rs485_rx_during_tx_gpio) - gpiod_set_value_cansleep(port->rs485_rx_during_tx_gpio, - !!(rs485conf->flags & SER_RS485_RX_DURING_TX)); - else - rs485conf->flags |= SER_RS485_RX_DURING_TX; - if (rs485conf->flags & SER_RS485_ENABLED) { cr1 = readl_relaxed(port->membase + ofs->cr1); cr3 = readl_relaxed(port->membase + ofs->cr3); @@ -256,6 +250,8 @@ static int stm32_usart_config_rs485(struct uart_port *port, struct ktermios *ter
writel_relaxed(cr3, port->membase + ofs->cr3); writel_relaxed(cr1, port->membase + ofs->cr1); + + rs485conf->flags |= SER_RS485_RX_DURING_TX; } else { stm32_usart_clr_bits(port, ofs->cr3, USART_CR3_DEM | USART_CR3_DEP);