From: Fabio Estevam festevam@denx.de
[ Upstream commit c70c453abcbf3ecbaadd4c3236a5119b8da365cf ]
According to Documentation/driver-api/usb/URB.rst when a device is unplugged usb_submit_urb() returns -ENODEV.
This error code propagates all the way up to usbnet_read_cmd() and usbnet_write_cmd() calls inside the smsc95xx.c driver during Ethernet cable unplug, unbind or reboot.
This causes the following errors to be shown on reboot, for example:
ci_hdrc ci_hdrc.1: remove, state 1 usb usb2: USB disconnect, device number 1 usb 2-1: USB disconnect, device number 2 usb 2-1.1: USB disconnect, device number 3 smsc95xx 2-1.1:1.0 eth1: unregister 'smsc95xx' usb-ci_hdrc.1-1.1, smsc95xx USB 2.0 Ethernet smsc95xx 2-1.1:1.0 eth1: Failed to read reg index 0x00000114: -19 smsc95xx 2-1.1:1.0 eth1: Error reading MII_ACCESS smsc95xx 2-1.1:1.0 eth1: __smsc95xx_mdio_read: MII is busy smsc95xx 2-1.1:1.0 eth1: Failed to read reg index 0x00000114: -19 smsc95xx 2-1.1:1.0 eth1: Error reading MII_ACCESS smsc95xx 2-1.1:1.0 eth1: __smsc95xx_mdio_read: MII is busy smsc95xx 2-1.1:1.0 eth1: hardware isn't capable of remote wakeup usb 2-1.4: USB disconnect, device number 4 ci_hdrc ci_hdrc.1: USB bus 2 deregistered ci_hdrc ci_hdrc.0: remove, state 4 usb usb1: USB disconnect, device number 1 ci_hdrc ci_hdrc.0: USB bus 1 deregistered imx2-wdt 30280000.watchdog: Device shutdown: Expect reboot! reboot: Restarting system
Ignore the -ENODEV errors inside __smsc95xx_mdio_read() and __smsc95xx_phy_wait_not_busy() and do not print error messages when -ENODEV is returned.
Fixes: a049a30fc27c ("net: usb: Correct PHY handling of smsc95xx") Signed-off-by: Fabio Estevam festevam@denx.de Signed-off-by: David S. Miller davem@davemloft.net Signed-off-by: Sasha Levin sashal@kernel.org --- drivers/net/usb/smsc95xx.c | 28 ++++++++++++++++++++-------- 1 file changed, 20 insertions(+), 8 deletions(-)
diff --git a/drivers/net/usb/smsc95xx.c b/drivers/net/usb/smsc95xx.c index 026e7487c45b..eb0d325e92b7 100644 --- a/drivers/net/usb/smsc95xx.c +++ b/drivers/net/usb/smsc95xx.c @@ -84,9 +84,10 @@ static int __must_check __smsc95xx_read_reg(struct usbnet *dev, u32 index, ret = fn(dev, USB_VENDOR_REQUEST_READ_REGISTER, USB_DIR_IN | USB_TYPE_VENDOR | USB_RECIP_DEVICE, 0, index, &buf, 4); - if (unlikely(ret < 0)) { - netdev_warn(dev->net, "Failed to read reg index 0x%08x: %d\n", - index, ret); + if (ret < 0) { + if (ret != -ENODEV) + netdev_warn(dev->net, "Failed to read reg index 0x%08x: %d\n", + index, ret); return ret; }
@@ -116,7 +117,7 @@ static int __must_check __smsc95xx_write_reg(struct usbnet *dev, u32 index, ret = fn(dev, USB_VENDOR_REQUEST_WRITE_REGISTER, USB_DIR_OUT | USB_TYPE_VENDOR | USB_RECIP_DEVICE, 0, index, &buf, 4); - if (unlikely(ret < 0)) + if (ret < 0 && ret != -ENODEV) netdev_warn(dev->net, "Failed to write reg index 0x%08x: %d\n", index, ret);
@@ -159,6 +160,9 @@ static int __must_check __smsc95xx_phy_wait_not_busy(struct usbnet *dev, do { ret = __smsc95xx_read_reg(dev, MII_ADDR, &val, in_pm); if (ret < 0) { + /* Ignore -ENODEV error during disconnect() */ + if (ret == -ENODEV) + return 0; netdev_warn(dev->net, "Error reading MII_ACCESS\n"); return ret; } @@ -194,7 +198,8 @@ static int __smsc95xx_mdio_read(struct usbnet *dev, int phy_id, int idx, addr = mii_address_cmd(phy_id, idx, MII_READ_ | MII_BUSY_); ret = __smsc95xx_write_reg(dev, MII_ADDR, addr, in_pm); if (ret < 0) { - netdev_warn(dev->net, "Error writing MII_ADDR\n"); + if (ret != -ENODEV) + netdev_warn(dev->net, "Error writing MII_ADDR\n"); goto done; }
@@ -206,7 +211,8 @@ static int __smsc95xx_mdio_read(struct usbnet *dev, int phy_id, int idx,
ret = __smsc95xx_read_reg(dev, MII_DATA, &val, in_pm); if (ret < 0) { - netdev_warn(dev->net, "Error reading MII_DATA\n"); + if (ret != -ENODEV) + netdev_warn(dev->net, "Error reading MII_DATA\n"); goto done; }
@@ -214,6 +220,10 @@ static int __smsc95xx_mdio_read(struct usbnet *dev, int phy_id, int idx,
done: mutex_unlock(&dev->phy_mutex); + + /* Ignore -ENODEV error during disconnect() */ + if (ret == -ENODEV) + return 0; return ret; }
@@ -235,7 +245,8 @@ static void __smsc95xx_mdio_write(struct usbnet *dev, int phy_id, val = regval; ret = __smsc95xx_write_reg(dev, MII_DATA, val, in_pm); if (ret < 0) { - netdev_warn(dev->net, "Error writing MII_DATA\n"); + if (ret != -ENODEV) + netdev_warn(dev->net, "Error writing MII_DATA\n"); goto done; }
@@ -243,7 +254,8 @@ static void __smsc95xx_mdio_write(struct usbnet *dev, int phy_id, addr = mii_address_cmd(phy_id, idx, MII_WRITE_ | MII_BUSY_); ret = __smsc95xx_write_reg(dev, MII_ADDR, addr, in_pm); if (ret < 0) { - netdev_warn(dev->net, "Error writing MII_ADDR\n"); + if (ret != -ENODEV) + netdev_warn(dev->net, "Error writing MII_ADDR\n"); goto done; }