Most HCR_EL2 bits are not supposed to affect EL2 at all, but only
the guest. However, we gladly merge these bits with the host's
HCR_EL2 configuration, irrespective of entering L1 or L2.
This leads to some funky behaviour, such as L1 trying to inject
a virtual SError for L2, and getting a taste of its own medecine.
Not quite what the architecture anticipated.
In the end, the only bits that matter are those we have defined as
invariants, either because we've made them RESx (E2H, HCD...), or
that we actively refuse to merge because the mess with KVM's own
logic.
Use the sanitisation infrastructure to get the RES1 bits, and let
things rip in a safer way.
Fixes: 04ab519bb86df ("KVM: arm64: nv: Configure HCR_EL2 for FEAT_NV2")
Signed-off-by: Marc Zyngier <maz(a)kernel.org>
Cc: stable(a)vger.kernel.org
---
arch/arm64/kvm/hyp/vhe/switch.c | 14 ++++++++++++--
1 file changed, 12 insertions(+), 2 deletions(-)
diff --git a/arch/arm64/kvm/hyp/vhe/switch.c b/arch/arm64/kvm/hyp/vhe/switch.c
index 477f1580ffeaa..e482181c66322 100644
--- a/arch/arm64/kvm/hyp/vhe/switch.c
+++ b/arch/arm64/kvm/hyp/vhe/switch.c
@@ -48,8 +48,7 @@ DEFINE_PER_CPU(unsigned long, kvm_hyp_vector);
static u64 __compute_hcr(struct kvm_vcpu *vcpu)
{
- u64 guest_hcr = __vcpu_sys_reg(vcpu, HCR_EL2);
- u64 hcr = vcpu->arch.hcr_el2;
+ u64 guest_hcr, hcr = vcpu->arch.hcr_el2;
if (!vcpu_has_nv(vcpu))
return hcr;
@@ -68,10 +67,21 @@ static u64 __compute_hcr(struct kvm_vcpu *vcpu)
if (!vcpu_el2_e2h_is_set(vcpu))
hcr |= HCR_NV1;
+ /*
+ * Nothing in HCR_EL2 should impact running in hypervisor
+ * context, apart from bits we have defined as RESx (E2H,
+ * HCD and co), or that cannot be set directly (the EXCLUDE
+ * bits). Given that we OR the guest's view with the host's,
+ * we can use the 0 value as the starting point, and only
+ * use the config-driven RES1 bits.
+ */
+ guest_hcr = kvm_vcpu_apply_reg_masks(vcpu, HCR_EL2, 0);
+
write_sysreg_s(vcpu->arch.ctxt.vncr_array, SYS_VNCR_EL2);
} else {
host_data_clear_flag(VCPU_IN_HYP_CONTEXT);
+ guest_hcr = __vcpu_sys_reg(vcpu, HCR_EL2);
if (guest_hcr & HCR_NV) {
u64 va = __fix_to_virt(vncr_fixmap(smp_processor_id()));
--
2.39.2
BootLoader (Grub, LILO, etc) may pass an identifier such as "BOOT_IMAGE=
/boot/vmlinuz-x.y.z" to kernel parameters. But these identifiers are not
recognized by the kernel itself so will be passed to user space. However
user space init program also doesn't recognized it.
KEXEC may also pass an identifier such as "kexec" on some architectures.
We cannot change BootLoader's behavior, because this behavior exists for
many years, and there are already user space programs search BOOT_IMAGE=
in /proc/cmdline to obtain the kernel image locations:
https://github.com/linuxdeepin/deepin-ab-recovery/blob/master/util.go
(search getBootOptions)
https://github.com/linuxdeepin/deepin-ab-recovery/blob/master/main.go
(search getKernelReleaseWithBootOption)
So the the best way is handle (ignore) it by the kernel itself, which
can avoid such boot warnings (if we use something like init=/bin/bash,
bootloader identifier can even cause a crash):
Kernel command line: BOOT_IMAGE=(hd0,1)/vmlinuz-6.x root=/dev/sda3 ro console=tty
Unknown kernel command line parameters "BOOT_IMAGE=(hd0,1)/vmlinuz-6.x", will be passed to user space.
Cc: stable(a)vger.kernel.org
Signed-off-by: Huacai Chen <chenhuacai(a)loongson.cn>
---
V2: Update comments and commit messages.
init/main.c | 7 +++++++
1 file changed, 7 insertions(+)
diff --git a/init/main.c b/init/main.c
index 225a58279acd..c53863e5ad82 100644
--- a/init/main.c
+++ b/init/main.c
@@ -545,6 +545,7 @@ static int __init unknown_bootoption(char *param, char *val,
const char *unused, void *arg)
{
size_t len = strlen(param);
+ const char *bootloader[] = { "BOOT_IMAGE=", "kexec", NULL };
/* Handle params aliased to sysctls */
if (sysctl_is_alias(param))
@@ -552,6 +553,12 @@ static int __init unknown_bootoption(char *param, char *val,
repair_env_string(param, val);
+ /* Handle bootloader identifier */
+ for (int i = 0; bootloader[i]; i++) {
+ if (!strncmp(param, bootloader[i], strlen(bootloader[i])))
+ return 0;
+ }
+
/* Handle obsolete-style parameters */
if (obsolete_checksetup(param))
return 0;
--
2.47.3
The current power direction of an USB-C port also influences the
power_supply's online status, so a power role change should also update
the power_supply.
Fixes an issue on some systems where plugging in a normal USB device in
for the first time after a reboot will cause upower to erroneously
consider the system to be connected to AC power.
Cc: stable(a)vger.kernel.org
Fixes: 0e6371fbfba3 ("usb: typec: ucsi: Report power supply changes")
Signed-off-by: Myrrh Periwinkle <myrrhperiwinkle(a)qtmlabs.xyz>
---
drivers/usb/typec/ucsi/ucsi.c | 1 +
1 file changed, 1 insertion(+)
diff --git a/drivers/usb/typec/ucsi/ucsi.c b/drivers/usb/typec/ucsi/ucsi.c
index 01ce858a1a2b3466155db340e213c767d1e79479..8ff31963970bb384e28b460e5307e32cf421396b 100644
--- a/drivers/usb/typec/ucsi/ucsi.c
+++ b/drivers/usb/typec/ucsi/ucsi.c
@@ -1246,6 +1246,7 @@ static void ucsi_handle_connector_change(struct work_struct *work)
if (change & UCSI_CONSTAT_POWER_DIR_CHANGE) {
typec_set_pwr_role(con->port, role);
+ ucsi_port_psy_changed(con);
/* Complete pending power role swap */
if (!completion_done(&con->complete))
---
base-commit: 89be9a83ccf1f88522317ce02f854f30d6115c41
change-id: 20250721-fix-ucsi-pwr-dir-notify-8a953aab42e5
Best regards,
--
Myrrh Periwinkle <myrrhperiwinkle(a)qtmlabs.xyz>
This patch fixes a race condition communication error, which ends up in
PD hard resets when losing the race. Some systems, like the Radxa ROCK
5B are powered through USB-C without any backup power source and use a
FUSB302 chip to do the PD negotiation. This means it is quite important
to avoid hard resets, since that effectively kills the system's
power-supply.
I've found the following race condition while debugging unplanned power
loss during booting the board every now and then:
1. lots of TCPM/FUSB302/PD initialization stuff
2. TCPM ends up in SNK_WAIT_CAPABILITIES (tcpm_set_pd_rx is enabled here)
3. the remote PD source does not send anything, so TCPM does a SOFT RESET
4. TCPM ends up in SNK_WAIT_CAPABILITIES for the second time
(tcpm_set_pd_rx is enabled again, even though it is still on)
At this point I've seen broken CRC good messages being send by the
FUSB302 with a logic analyzer sniffing the CC lines. Also it looks like
messages are being lost and things generally going haywire with one of
the two sides doing a hard reset once a broken CRC good message was send
to the bus.
I think the system is running into a race condition, that the FIFOs are
being cleared and/or the automatic good CRC message generation flag is
being updated while a message is already arriving.
Let's avoid this by caching the PD RX enabled state, as we have already
processed anything in the FIFOs and are in a good state. As a side
effect that this also optimizes I2C bus usage :)
As far as I can tell the problem theoretically also exists when TCPM
enters SNK_WAIT_CAPABILITIES the first time, but I believe this is less
critical for the following reason:
On devices like the ROCK 5B, which are powered through a TCPM backed
USB-C port, the bootloader must have done some prior PD communication
(initial communication must happen within 5 seconds after plugging the
USB-C plug). This means the first time the kernel TCPM state machine
reaches SNK_WAIT_CAPABILITIES, the remote side is not sending messages
actively. On other devices a hard reset simply adds some extra delay and
things should be good afterwards.
Fixes: c034a43e72dda ("staging: typec: Fairchild FUSB302 Type-c chip driver")
Cc: stable(a)vger.kernel.org
Signed-off-by: Sebastian Reichel <sebastian.reichel(a)collabora.com>
---
drivers/usb/typec/tcpm/fusb302.c | 8 ++++++++
1 file changed, 8 insertions(+)
diff --git a/drivers/usb/typec/tcpm/fusb302.c b/drivers/usb/typec/tcpm/fusb302.c
index f15c63d3a8f441569ec98302f5b241430d8e4547..870a71f953f6cd8dfc618caea56f72782e40ee1c 100644
--- a/drivers/usb/typec/tcpm/fusb302.c
+++ b/drivers/usb/typec/tcpm/fusb302.c
@@ -104,6 +104,7 @@ struct fusb302_chip {
bool vconn_on;
bool vbus_on;
bool charge_on;
+ bool pd_rx_on;
bool vbus_present;
enum typec_cc_polarity cc_polarity;
enum typec_cc_status cc1;
@@ -841,6 +842,11 @@ static int tcpm_set_pd_rx(struct tcpc_dev *dev, bool on)
int ret = 0;
mutex_lock(&chip->lock);
+ if (chip->pd_rx_on == on) {
+ fusb302_log(chip, "pd is already %s", str_on_off(on));
+ goto done;
+ }
+
ret = fusb302_pd_rx_flush(chip);
if (ret < 0) {
fusb302_log(chip, "cannot flush pd rx buffer, ret=%d", ret);
@@ -863,6 +869,8 @@ static int tcpm_set_pd_rx(struct tcpc_dev *dev, bool on)
str_on_off(on), ret);
goto done;
}
+
+ chip->pd_rx_on = on;
fusb302_log(chip, "pd := %s", str_on_off(on));
done:
mutex_unlock(&chip->lock);
---
base-commit: c435a4f487e8c6a3b23dafbda87d971d4fd14e0b
change-id: 20250704-fusb302-race-condition-fix-9cc9de73f05d
Best regards,
--
Sebastian Reichel <sre(a)kernel.org>
The patch below does not apply to the 5.10-stable tree.
If someone wants it applied there, or to any other stable or longterm
tree, then please email the backport, including the original git commit
id to <stable(a)vger.kernel.org>.
To reproduce the conflict and resubmit, you may use the following commands:
git fetch https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git/ linux-5.10.y
git checkout FETCH_HEAD
git cherry-pick -x 60c016afccac7acb78a43b9c75480887ed3ce48e
# <resolve conflicts, build, test, etc.>
git commit -s
git send-email --to '<stable(a)vger.kernel.org>' --in-reply-to '2025072132-jargon-concierge-f26f@gregkh' --subject-prefix 'PATCH 5.10.y' HEAD^..
Possible dependencies:
thanks,
greg k-h
------------------ original commit in Linus's tree ------------------
From 60c016afccac7acb78a43b9c75480887ed3ce48e Mon Sep 17 00:00:00 2001
From: Christophe JAILLET <christophe.jaillet(a)wanadoo.fr>
Date: Sat, 5 Jul 2025 09:57:38 +0200
Subject: [PATCH] i2c: omap: Fix an error handling path in omap_i2c_probe()
If an error occurs after pm_runtime_use_autosuspend(), a corresponding
pm_runtime_dont_use_autosuspend() should be called.
In case of error in pm_runtime_resume_and_get(), it is not the case because
the error handling path is wrongly ordered.
Fix it.
Fixes: 780f62974125 ("i2c: omap: fix reference leak when pm_runtime_get_sync fails")
Signed-off-by: Christophe JAILLET <christophe.jaillet(a)wanadoo.fr>
Cc: <stable(a)vger.kernel.org> # v5.13+
Signed-off-by: Andi Shyti <andi.shyti(a)kernel.org>
Link: https://lore.kernel.org/r/af8a9b62996bebbaaa7c02986aa2a8325ef11596.17517017…
diff --git a/drivers/i2c/busses/i2c-omap.c b/drivers/i2c/busses/i2c-omap.c
index 17db58195c06..5fcc9f6c33e5 100644
--- a/drivers/i2c/busses/i2c-omap.c
+++ b/drivers/i2c/busses/i2c-omap.c
@@ -1521,9 +1521,9 @@ omap_i2c_probe(struct platform_device *pdev)
if (omap->mux_state)
mux_state_deselect(omap->mux_state);
err_put_pm:
- pm_runtime_dont_use_autosuspend(omap->dev);
pm_runtime_put_sync(omap->dev);
err_disable_pm:
+ pm_runtime_dont_use_autosuspend(omap->dev);
pm_runtime_disable(&pdev->dev);
return r;
The patch below does not apply to the 5.4-stable tree.
If someone wants it applied there, or to any other stable or longterm
tree, then please email the backport, including the original git commit
id to <stable(a)vger.kernel.org>.
To reproduce the conflict and resubmit, you may use the following commands:
git fetch https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git/ linux-5.4.y
git checkout FETCH_HEAD
git cherry-pick -x 60c016afccac7acb78a43b9c75480887ed3ce48e
# <resolve conflicts, build, test, etc.>
git commit -s
git send-email --to '<stable(a)vger.kernel.org>' --in-reply-to '2025072132-reabsorb-culpable-6c6a@gregkh' --subject-prefix 'PATCH 5.4.y' HEAD^..
Possible dependencies:
thanks,
greg k-h
------------------ original commit in Linus's tree ------------------
From 60c016afccac7acb78a43b9c75480887ed3ce48e Mon Sep 17 00:00:00 2001
From: Christophe JAILLET <christophe.jaillet(a)wanadoo.fr>
Date: Sat, 5 Jul 2025 09:57:38 +0200
Subject: [PATCH] i2c: omap: Fix an error handling path in omap_i2c_probe()
If an error occurs after pm_runtime_use_autosuspend(), a corresponding
pm_runtime_dont_use_autosuspend() should be called.
In case of error in pm_runtime_resume_and_get(), it is not the case because
the error handling path is wrongly ordered.
Fix it.
Fixes: 780f62974125 ("i2c: omap: fix reference leak when pm_runtime_get_sync fails")
Signed-off-by: Christophe JAILLET <christophe.jaillet(a)wanadoo.fr>
Cc: <stable(a)vger.kernel.org> # v5.13+
Signed-off-by: Andi Shyti <andi.shyti(a)kernel.org>
Link: https://lore.kernel.org/r/af8a9b62996bebbaaa7c02986aa2a8325ef11596.17517017…
diff --git a/drivers/i2c/busses/i2c-omap.c b/drivers/i2c/busses/i2c-omap.c
index 17db58195c06..5fcc9f6c33e5 100644
--- a/drivers/i2c/busses/i2c-omap.c
+++ b/drivers/i2c/busses/i2c-omap.c
@@ -1521,9 +1521,9 @@ omap_i2c_probe(struct platform_device *pdev)
if (omap->mux_state)
mux_state_deselect(omap->mux_state);
err_put_pm:
- pm_runtime_dont_use_autosuspend(omap->dev);
pm_runtime_put_sync(omap->dev);
err_disable_pm:
+ pm_runtime_dont_use_autosuspend(omap->dev);
pm_runtime_disable(&pdev->dev);
return r;
The patch below does not apply to the 6.1-stable tree.
If someone wants it applied there, or to any other stable or longterm
tree, then please email the backport, including the original git commit
id to <stable(a)vger.kernel.org>.
To reproduce the conflict and resubmit, you may use the following commands:
git fetch https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git/ linux-6.1.y
git checkout FETCH_HEAD
git cherry-pick -x 60c016afccac7acb78a43b9c75480887ed3ce48e
# <resolve conflicts, build, test, etc.>
git commit -s
git send-email --to '<stable(a)vger.kernel.org>' --in-reply-to '2025072131-concave-saddlebag-ab4b@gregkh' --subject-prefix 'PATCH 6.1.y' HEAD^..
Possible dependencies:
thanks,
greg k-h
------------------ original commit in Linus's tree ------------------
From 60c016afccac7acb78a43b9c75480887ed3ce48e Mon Sep 17 00:00:00 2001
From: Christophe JAILLET <christophe.jaillet(a)wanadoo.fr>
Date: Sat, 5 Jul 2025 09:57:38 +0200
Subject: [PATCH] i2c: omap: Fix an error handling path in omap_i2c_probe()
If an error occurs after pm_runtime_use_autosuspend(), a corresponding
pm_runtime_dont_use_autosuspend() should be called.
In case of error in pm_runtime_resume_and_get(), it is not the case because
the error handling path is wrongly ordered.
Fix it.
Fixes: 780f62974125 ("i2c: omap: fix reference leak when pm_runtime_get_sync fails")
Signed-off-by: Christophe JAILLET <christophe.jaillet(a)wanadoo.fr>
Cc: <stable(a)vger.kernel.org> # v5.13+
Signed-off-by: Andi Shyti <andi.shyti(a)kernel.org>
Link: https://lore.kernel.org/r/af8a9b62996bebbaaa7c02986aa2a8325ef11596.17517017…
diff --git a/drivers/i2c/busses/i2c-omap.c b/drivers/i2c/busses/i2c-omap.c
index 17db58195c06..5fcc9f6c33e5 100644
--- a/drivers/i2c/busses/i2c-omap.c
+++ b/drivers/i2c/busses/i2c-omap.c
@@ -1521,9 +1521,9 @@ omap_i2c_probe(struct platform_device *pdev)
if (omap->mux_state)
mux_state_deselect(omap->mux_state);
err_put_pm:
- pm_runtime_dont_use_autosuspend(omap->dev);
pm_runtime_put_sync(omap->dev);
err_disable_pm:
+ pm_runtime_dont_use_autosuspend(omap->dev);
pm_runtime_disable(&pdev->dev);
return r;
The patch below does not apply to the 5.15-stable tree.
If someone wants it applied there, or to any other stable or longterm
tree, then please email the backport, including the original git commit
id to <stable(a)vger.kernel.org>.
To reproduce the conflict and resubmit, you may use the following commands:
git fetch https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git/ linux-5.15.y
git checkout FETCH_HEAD
git cherry-pick -x 60c016afccac7acb78a43b9c75480887ed3ce48e
# <resolve conflicts, build, test, etc.>
git commit -s
git send-email --to '<stable(a)vger.kernel.org>' --in-reply-to '2025072131-observant-cost-1619@gregkh' --subject-prefix 'PATCH 5.15.y' HEAD^..
Possible dependencies:
thanks,
greg k-h
------------------ original commit in Linus's tree ------------------
From 60c016afccac7acb78a43b9c75480887ed3ce48e Mon Sep 17 00:00:00 2001
From: Christophe JAILLET <christophe.jaillet(a)wanadoo.fr>
Date: Sat, 5 Jul 2025 09:57:38 +0200
Subject: [PATCH] i2c: omap: Fix an error handling path in omap_i2c_probe()
If an error occurs after pm_runtime_use_autosuspend(), a corresponding
pm_runtime_dont_use_autosuspend() should be called.
In case of error in pm_runtime_resume_and_get(), it is not the case because
the error handling path is wrongly ordered.
Fix it.
Fixes: 780f62974125 ("i2c: omap: fix reference leak when pm_runtime_get_sync fails")
Signed-off-by: Christophe JAILLET <christophe.jaillet(a)wanadoo.fr>
Cc: <stable(a)vger.kernel.org> # v5.13+
Signed-off-by: Andi Shyti <andi.shyti(a)kernel.org>
Link: https://lore.kernel.org/r/af8a9b62996bebbaaa7c02986aa2a8325ef11596.17517017…
diff --git a/drivers/i2c/busses/i2c-omap.c b/drivers/i2c/busses/i2c-omap.c
index 17db58195c06..5fcc9f6c33e5 100644
--- a/drivers/i2c/busses/i2c-omap.c
+++ b/drivers/i2c/busses/i2c-omap.c
@@ -1521,9 +1521,9 @@ omap_i2c_probe(struct platform_device *pdev)
if (omap->mux_state)
mux_state_deselect(omap->mux_state);
err_put_pm:
- pm_runtime_dont_use_autosuspend(omap->dev);
pm_runtime_put_sync(omap->dev);
err_disable_pm:
+ pm_runtime_dont_use_autosuspend(omap->dev);
pm_runtime_disable(&pdev->dev);
return r;
The patch below does not apply to the 6.12-stable tree.
If someone wants it applied there, or to any other stable or longterm
tree, then please email the backport, including the original git commit
id to <stable(a)vger.kernel.org>.
To reproduce the conflict and resubmit, you may use the following commands:
git fetch https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git/ linux-6.12.y
git checkout FETCH_HEAD
git cherry-pick -x 60c016afccac7acb78a43b9c75480887ed3ce48e
# <resolve conflicts, build, test, etc.>
git commit -s
git send-email --to '<stable(a)vger.kernel.org>' --in-reply-to '2025072130-motocross-palpitate-b637@gregkh' --subject-prefix 'PATCH 6.12.y' HEAD^..
Possible dependencies:
thanks,
greg k-h
------------------ original commit in Linus's tree ------------------
From 60c016afccac7acb78a43b9c75480887ed3ce48e Mon Sep 17 00:00:00 2001
From: Christophe JAILLET <christophe.jaillet(a)wanadoo.fr>
Date: Sat, 5 Jul 2025 09:57:38 +0200
Subject: [PATCH] i2c: omap: Fix an error handling path in omap_i2c_probe()
If an error occurs after pm_runtime_use_autosuspend(), a corresponding
pm_runtime_dont_use_autosuspend() should be called.
In case of error in pm_runtime_resume_and_get(), it is not the case because
the error handling path is wrongly ordered.
Fix it.
Fixes: 780f62974125 ("i2c: omap: fix reference leak when pm_runtime_get_sync fails")
Signed-off-by: Christophe JAILLET <christophe.jaillet(a)wanadoo.fr>
Cc: <stable(a)vger.kernel.org> # v5.13+
Signed-off-by: Andi Shyti <andi.shyti(a)kernel.org>
Link: https://lore.kernel.org/r/af8a9b62996bebbaaa7c02986aa2a8325ef11596.17517017…
diff --git a/drivers/i2c/busses/i2c-omap.c b/drivers/i2c/busses/i2c-omap.c
index 17db58195c06..5fcc9f6c33e5 100644
--- a/drivers/i2c/busses/i2c-omap.c
+++ b/drivers/i2c/busses/i2c-omap.c
@@ -1521,9 +1521,9 @@ omap_i2c_probe(struct platform_device *pdev)
if (omap->mux_state)
mux_state_deselect(omap->mux_state);
err_put_pm:
- pm_runtime_dont_use_autosuspend(omap->dev);
pm_runtime_put_sync(omap->dev);
err_disable_pm:
+ pm_runtime_dont_use_autosuspend(omap->dev);
pm_runtime_disable(&pdev->dev);
return r;
The patch below does not apply to the 6.6-stable tree.
If someone wants it applied there, or to any other stable or longterm
tree, then please email the backport, including the original git commit
id to <stable(a)vger.kernel.org>.
To reproduce the conflict and resubmit, you may use the following commands:
git fetch https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git/ linux-6.6.y
git checkout FETCH_HEAD
git cherry-pick -x 60c016afccac7acb78a43b9c75480887ed3ce48e
# <resolve conflicts, build, test, etc.>
git commit -s
git send-email --to '<stable(a)vger.kernel.org>' --in-reply-to '2025072130-usher-blade-99e6@gregkh' --subject-prefix 'PATCH 6.6.y' HEAD^..
Possible dependencies:
thanks,
greg k-h
------------------ original commit in Linus's tree ------------------
From 60c016afccac7acb78a43b9c75480887ed3ce48e Mon Sep 17 00:00:00 2001
From: Christophe JAILLET <christophe.jaillet(a)wanadoo.fr>
Date: Sat, 5 Jul 2025 09:57:38 +0200
Subject: [PATCH] i2c: omap: Fix an error handling path in omap_i2c_probe()
If an error occurs after pm_runtime_use_autosuspend(), a corresponding
pm_runtime_dont_use_autosuspend() should be called.
In case of error in pm_runtime_resume_and_get(), it is not the case because
the error handling path is wrongly ordered.
Fix it.
Fixes: 780f62974125 ("i2c: omap: fix reference leak when pm_runtime_get_sync fails")
Signed-off-by: Christophe JAILLET <christophe.jaillet(a)wanadoo.fr>
Cc: <stable(a)vger.kernel.org> # v5.13+
Signed-off-by: Andi Shyti <andi.shyti(a)kernel.org>
Link: https://lore.kernel.org/r/af8a9b62996bebbaaa7c02986aa2a8325ef11596.17517017…
diff --git a/drivers/i2c/busses/i2c-omap.c b/drivers/i2c/busses/i2c-omap.c
index 17db58195c06..5fcc9f6c33e5 100644
--- a/drivers/i2c/busses/i2c-omap.c
+++ b/drivers/i2c/busses/i2c-omap.c
@@ -1521,9 +1521,9 @@ omap_i2c_probe(struct platform_device *pdev)
if (omap->mux_state)
mux_state_deselect(omap->mux_state);
err_put_pm:
- pm_runtime_dont_use_autosuspend(omap->dev);
pm_runtime_put_sync(omap->dev);
err_disable_pm:
+ pm_runtime_dont_use_autosuspend(omap->dev);
pm_runtime_disable(&pdev->dev);
return r;
The patch below does not apply to the 5.4-stable tree.
If someone wants it applied there, or to any other stable or longterm
tree, then please email the backport, including the original git commit
id to <stable(a)vger.kernel.org>.
To reproduce the conflict and resubmit, you may use the following commands:
git fetch https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git/ linux-5.4.y
git checkout FETCH_HEAD
git cherry-pick -x a9503a2ecd95e23d7243bcde7138192de8c1c281
# <resolve conflicts, build, test, etc.>
git commit -s
git send-email --to '<stable(a)vger.kernel.org>' --in-reply-to '2025072121-attendant-puma-a775@gregkh' --subject-prefix 'PATCH 5.4.y' HEAD^..
Possible dependencies:
thanks,
greg k-h
------------------ original commit in Linus's tree ------------------
From a9503a2ecd95e23d7243bcde7138192de8c1c281 Mon Sep 17 00:00:00 2001
From: Christophe JAILLET <christophe.jaillet(a)wanadoo.fr>
Date: Sat, 5 Jul 2025 09:57:37 +0200
Subject: [PATCH] i2c: omap: Handle omap_i2c_init() errors in omap_i2c_probe()
omap_i2c_init() can fail. Handle this error in omap_i2c_probe().
Fixes: 010d442c4a29 ("i2c: New bus driver for TI OMAP boards")
Signed-off-by: Christophe JAILLET <christophe.jaillet(a)wanadoo.fr>
Cc: <stable(a)vger.kernel.org> # v2.6.19+
Signed-off-by: Andi Shyti <andi.shyti(a)kernel.org>
Link: https://lore.kernel.org/r/565311abf9bafd7291ca82bcecb48c1fac1e727b.17517017…
diff --git a/drivers/i2c/busses/i2c-omap.c b/drivers/i2c/busses/i2c-omap.c
index 8b01df3cc8e9..17db58195c06 100644
--- a/drivers/i2c/busses/i2c-omap.c
+++ b/drivers/i2c/busses/i2c-omap.c
@@ -1472,7 +1472,9 @@ omap_i2c_probe(struct platform_device *pdev)
}
/* reset ASAP, clearing any IRQs */
- omap_i2c_init(omap);
+ r = omap_i2c_init(omap);
+ if (r)
+ goto err_mux_state_deselect;
if (omap->rev < OMAP_I2C_OMAP1_REV_2)
r = devm_request_irq(&pdev->dev, omap->irq, omap_i2c_omap1_isr,
@@ -1515,6 +1517,7 @@ omap_i2c_probe(struct platform_device *pdev)
err_unuse_clocks:
omap_i2c_write_reg(omap, OMAP_I2C_CON_REG, 0);
+err_mux_state_deselect:
if (omap->mux_state)
mux_state_deselect(omap->mux_state);
err_put_pm:
The patch below does not apply to the 5.15-stable tree.
If someone wants it applied there, or to any other stable or longterm
tree, then please email the backport, including the original git commit
id to <stable(a)vger.kernel.org>.
To reproduce the conflict and resubmit, you may use the following commands:
git fetch https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git/ linux-5.15.y
git checkout FETCH_HEAD
git cherry-pick -x a9503a2ecd95e23d7243bcde7138192de8c1c281
# <resolve conflicts, build, test, etc.>
git commit -s
git send-email --to '<stable(a)vger.kernel.org>' --in-reply-to '2025072120-autism-unroll-a7bd@gregkh' --subject-prefix 'PATCH 5.15.y' HEAD^..
Possible dependencies:
thanks,
greg k-h
------------------ original commit in Linus's tree ------------------
From a9503a2ecd95e23d7243bcde7138192de8c1c281 Mon Sep 17 00:00:00 2001
From: Christophe JAILLET <christophe.jaillet(a)wanadoo.fr>
Date: Sat, 5 Jul 2025 09:57:37 +0200
Subject: [PATCH] i2c: omap: Handle omap_i2c_init() errors in omap_i2c_probe()
omap_i2c_init() can fail. Handle this error in omap_i2c_probe().
Fixes: 010d442c4a29 ("i2c: New bus driver for TI OMAP boards")
Signed-off-by: Christophe JAILLET <christophe.jaillet(a)wanadoo.fr>
Cc: <stable(a)vger.kernel.org> # v2.6.19+
Signed-off-by: Andi Shyti <andi.shyti(a)kernel.org>
Link: https://lore.kernel.org/r/565311abf9bafd7291ca82bcecb48c1fac1e727b.17517017…
diff --git a/drivers/i2c/busses/i2c-omap.c b/drivers/i2c/busses/i2c-omap.c
index 8b01df3cc8e9..17db58195c06 100644
--- a/drivers/i2c/busses/i2c-omap.c
+++ b/drivers/i2c/busses/i2c-omap.c
@@ -1472,7 +1472,9 @@ omap_i2c_probe(struct platform_device *pdev)
}
/* reset ASAP, clearing any IRQs */
- omap_i2c_init(omap);
+ r = omap_i2c_init(omap);
+ if (r)
+ goto err_mux_state_deselect;
if (omap->rev < OMAP_I2C_OMAP1_REV_2)
r = devm_request_irq(&pdev->dev, omap->irq, omap_i2c_omap1_isr,
@@ -1515,6 +1517,7 @@ omap_i2c_probe(struct platform_device *pdev)
err_unuse_clocks:
omap_i2c_write_reg(omap, OMAP_I2C_CON_REG, 0);
+err_mux_state_deselect:
if (omap->mux_state)
mux_state_deselect(omap->mux_state);
err_put_pm:
The patch below does not apply to the 5.10-stable tree.
If someone wants it applied there, or to any other stable or longterm
tree, then please email the backport, including the original git commit
id to <stable(a)vger.kernel.org>.
To reproduce the conflict and resubmit, you may use the following commands:
git fetch https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git/ linux-5.10.y
git checkout FETCH_HEAD
git cherry-pick -x a9503a2ecd95e23d7243bcde7138192de8c1c281
# <resolve conflicts, build, test, etc.>
git commit -s
git send-email --to '<stable(a)vger.kernel.org>' --in-reply-to '2025072120-crop-penny-6e87@gregkh' --subject-prefix 'PATCH 5.10.y' HEAD^..
Possible dependencies:
thanks,
greg k-h
------------------ original commit in Linus's tree ------------------
From a9503a2ecd95e23d7243bcde7138192de8c1c281 Mon Sep 17 00:00:00 2001
From: Christophe JAILLET <christophe.jaillet(a)wanadoo.fr>
Date: Sat, 5 Jul 2025 09:57:37 +0200
Subject: [PATCH] i2c: omap: Handle omap_i2c_init() errors in omap_i2c_probe()
omap_i2c_init() can fail. Handle this error in omap_i2c_probe().
Fixes: 010d442c4a29 ("i2c: New bus driver for TI OMAP boards")
Signed-off-by: Christophe JAILLET <christophe.jaillet(a)wanadoo.fr>
Cc: <stable(a)vger.kernel.org> # v2.6.19+
Signed-off-by: Andi Shyti <andi.shyti(a)kernel.org>
Link: https://lore.kernel.org/r/565311abf9bafd7291ca82bcecb48c1fac1e727b.17517017…
diff --git a/drivers/i2c/busses/i2c-omap.c b/drivers/i2c/busses/i2c-omap.c
index 8b01df3cc8e9..17db58195c06 100644
--- a/drivers/i2c/busses/i2c-omap.c
+++ b/drivers/i2c/busses/i2c-omap.c
@@ -1472,7 +1472,9 @@ omap_i2c_probe(struct platform_device *pdev)
}
/* reset ASAP, clearing any IRQs */
- omap_i2c_init(omap);
+ r = omap_i2c_init(omap);
+ if (r)
+ goto err_mux_state_deselect;
if (omap->rev < OMAP_I2C_OMAP1_REV_2)
r = devm_request_irq(&pdev->dev, omap->irq, omap_i2c_omap1_isr,
@@ -1515,6 +1517,7 @@ omap_i2c_probe(struct platform_device *pdev)
err_unuse_clocks:
omap_i2c_write_reg(omap, OMAP_I2C_CON_REG, 0);
+err_mux_state_deselect:
if (omap->mux_state)
mux_state_deselect(omap->mux_state);
err_put_pm:
The patch below does not apply to the 6.1-stable tree.
If someone wants it applied there, or to any other stable or longterm
tree, then please email the backport, including the original git commit
id to <stable(a)vger.kernel.org>.
To reproduce the conflict and resubmit, you may use the following commands:
git fetch https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git/ linux-6.1.y
git checkout FETCH_HEAD
git cherry-pick -x a9503a2ecd95e23d7243bcde7138192de8c1c281
# <resolve conflicts, build, test, etc.>
git commit -s
git send-email --to '<stable(a)vger.kernel.org>' --in-reply-to '2025072119-chili-word-b009@gregkh' --subject-prefix 'PATCH 6.1.y' HEAD^..
Possible dependencies:
thanks,
greg k-h
------------------ original commit in Linus's tree ------------------
From a9503a2ecd95e23d7243bcde7138192de8c1c281 Mon Sep 17 00:00:00 2001
From: Christophe JAILLET <christophe.jaillet(a)wanadoo.fr>
Date: Sat, 5 Jul 2025 09:57:37 +0200
Subject: [PATCH] i2c: omap: Handle omap_i2c_init() errors in omap_i2c_probe()
omap_i2c_init() can fail. Handle this error in omap_i2c_probe().
Fixes: 010d442c4a29 ("i2c: New bus driver for TI OMAP boards")
Signed-off-by: Christophe JAILLET <christophe.jaillet(a)wanadoo.fr>
Cc: <stable(a)vger.kernel.org> # v2.6.19+
Signed-off-by: Andi Shyti <andi.shyti(a)kernel.org>
Link: https://lore.kernel.org/r/565311abf9bafd7291ca82bcecb48c1fac1e727b.17517017…
diff --git a/drivers/i2c/busses/i2c-omap.c b/drivers/i2c/busses/i2c-omap.c
index 8b01df3cc8e9..17db58195c06 100644
--- a/drivers/i2c/busses/i2c-omap.c
+++ b/drivers/i2c/busses/i2c-omap.c
@@ -1472,7 +1472,9 @@ omap_i2c_probe(struct platform_device *pdev)
}
/* reset ASAP, clearing any IRQs */
- omap_i2c_init(omap);
+ r = omap_i2c_init(omap);
+ if (r)
+ goto err_mux_state_deselect;
if (omap->rev < OMAP_I2C_OMAP1_REV_2)
r = devm_request_irq(&pdev->dev, omap->irq, omap_i2c_omap1_isr,
@@ -1515,6 +1517,7 @@ omap_i2c_probe(struct platform_device *pdev)
err_unuse_clocks:
omap_i2c_write_reg(omap, OMAP_I2C_CON_REG, 0);
+err_mux_state_deselect:
if (omap->mux_state)
mux_state_deselect(omap->mux_state);
err_put_pm:
The patch below does not apply to the 5.4-stable tree.
If someone wants it applied there, or to any other stable or longterm
tree, then please email the backport, including the original git commit
id to <stable(a)vger.kernel.org>.
To reproduce the conflict and resubmit, you may use the following commands:
git fetch https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git/ linux-5.4.y
git checkout FETCH_HEAD
git cherry-pick -x 6aae87fe7f180cd93a74466cdb6cf2aa9bb28798
# <resolve conflicts, build, test, etc.>
git commit -s
git send-email --to '<stable(a)vger.kernel.org>' --in-reply-to '2025072107-provolone-sagging-274b@gregkh' --subject-prefix 'PATCH 5.4.y' HEAD^..
Possible dependencies:
thanks,
greg k-h
------------------ original commit in Linus's tree ------------------
From 6aae87fe7f180cd93a74466cdb6cf2aa9bb28798 Mon Sep 17 00:00:00 2001
From: =?UTF-8?q?Cl=C3=A9ment=20Le=20Goffic?= <clement.legoffic(a)foss.st.com>
Date: Fri, 4 Jul 2025 10:39:15 +0200
Subject: [PATCH] i2c: stm32f7: unmap DMA mapped buffer
MIME-Version: 1.0
Content-Type: text/plain; charset=UTF-8
Content-Transfer-Encoding: 8bit
Before each I2C transfer using DMA, the I2C buffer is DMA'pped to make
sure the memory buffer is DMA'able. This is handle in the function
`stm32_i2c_prep_dma_xfer()`.
If the transfer fails for any reason the I2C buffer must be unmap.
Use the dma_callback to factorize the code and fix this issue.
Note that the `stm32f7_i2c_dma_callback()` is now called in case of DMA
transfer success and error and that the `complete()` on the dma_complete
completion structure is done inconditionnally in case of transfer
success or error as well as the `dmaengine_terminate_async()`.
This is allowed as a `complete()` in case transfer error has no effect
as well as a `dmaengine_terminate_async()` on a transfer success.
Also fix the unneeded cast and remove not more needed variables.
Fixes: 7ecc8cfde553 ("i2c: i2c-stm32f7: Add DMA support")
Signed-off-by: Clément Le Goffic <clement.legoffic(a)foss.st.com>
Cc: <stable(a)vger.kernel.org> # v4.18+
Acked-by: Alain Volmat <alain.volmat(a)foss.st.com>
Signed-off-by: Andi Shyti <andi.shyti(a)kernel.org>
Link: https://lore.kernel.org/r/20250704-i2c-upstream-v4-2-84a095a2c728@foss.st.c…
diff --git a/drivers/i2c/busses/i2c-stm32f7.c b/drivers/i2c/busses/i2c-stm32f7.c
index 817d081460c2..73a7b8894c0d 100644
--- a/drivers/i2c/busses/i2c-stm32f7.c
+++ b/drivers/i2c/busses/i2c-stm32f7.c
@@ -739,10 +739,11 @@ static void stm32f7_i2c_disable_dma_req(struct stm32f7_i2c_dev *i2c_dev)
static void stm32f7_i2c_dma_callback(void *arg)
{
- struct stm32f7_i2c_dev *i2c_dev = (struct stm32f7_i2c_dev *)arg;
+ struct stm32f7_i2c_dev *i2c_dev = arg;
struct stm32_i2c_dma *dma = i2c_dev->dma;
stm32f7_i2c_disable_dma_req(i2c_dev);
+ dmaengine_terminate_async(dma->chan_using);
dma_unmap_single(i2c_dev->dev, dma->dma_buf, dma->dma_len,
dma->dma_data_dir);
complete(&dma->dma_complete);
@@ -1510,7 +1511,6 @@ static irqreturn_t stm32f7_i2c_handle_isr_errs(struct stm32f7_i2c_dev *i2c_dev,
u16 addr = f7_msg->addr;
void __iomem *base = i2c_dev->base;
struct device *dev = i2c_dev->dev;
- struct stm32_i2c_dma *dma = i2c_dev->dma;
/* Bus error */
if (status & STM32F7_I2C_ISR_BERR) {
@@ -1551,10 +1551,8 @@ static irqreturn_t stm32f7_i2c_handle_isr_errs(struct stm32f7_i2c_dev *i2c_dev,
}
/* Disable dma */
- if (i2c_dev->use_dma) {
- stm32f7_i2c_disable_dma_req(i2c_dev);
- dmaengine_terminate_async(dma->chan_using);
- }
+ if (i2c_dev->use_dma)
+ stm32f7_i2c_dma_callback(i2c_dev);
i2c_dev->master_mode = false;
complete(&i2c_dev->complete);
@@ -1600,7 +1598,6 @@ static irqreturn_t stm32f7_i2c_isr_event_thread(int irq, void *data)
{
struct stm32f7_i2c_dev *i2c_dev = data;
struct stm32f7_i2c_msg *f7_msg = &i2c_dev->f7_msg;
- struct stm32_i2c_dma *dma = i2c_dev->dma;
void __iomem *base = i2c_dev->base;
u32 status, mask;
int ret;
@@ -1619,10 +1616,8 @@ static irqreturn_t stm32f7_i2c_isr_event_thread(int irq, void *data)
dev_dbg(i2c_dev->dev, "<%s>: Receive NACK (addr %x)\n",
__func__, f7_msg->addr);
writel_relaxed(STM32F7_I2C_ICR_NACKCF, base + STM32F7_I2C_ICR);
- if (i2c_dev->use_dma) {
- stm32f7_i2c_disable_dma_req(i2c_dev);
- dmaengine_terminate_async(dma->chan_using);
- }
+ if (i2c_dev->use_dma)
+ stm32f7_i2c_dma_callback(i2c_dev);
f7_msg->result = -ENXIO;
}
@@ -1640,8 +1635,7 @@ static irqreturn_t stm32f7_i2c_isr_event_thread(int irq, void *data)
ret = wait_for_completion_timeout(&i2c_dev->dma->dma_complete, HZ);
if (!ret) {
dev_dbg(i2c_dev->dev, "<%s>: Timed out\n", __func__);
- stm32f7_i2c_disable_dma_req(i2c_dev);
- dmaengine_terminate_async(dma->chan_using);
+ stm32f7_i2c_dma_callback(i2c_dev);
f7_msg->result = -ETIMEDOUT;
}
}
The patch below does not apply to the 5.15-stable tree.
If someone wants it applied there, or to any other stable or longterm
tree, then please email the backport, including the original git commit
id to <stable(a)vger.kernel.org>.
To reproduce the conflict and resubmit, you may use the following commands:
git fetch https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git/ linux-5.15.y
git checkout FETCH_HEAD
git cherry-pick -x 6aae87fe7f180cd93a74466cdb6cf2aa9bb28798
# <resolve conflicts, build, test, etc.>
git commit -s
git send-email --to '<stable(a)vger.kernel.org>' --in-reply-to '2025072105-chatroom-overbuilt-5fd3@gregkh' --subject-prefix 'PATCH 5.15.y' HEAD^..
Possible dependencies:
thanks,
greg k-h
------------------ original commit in Linus's tree ------------------
From 6aae87fe7f180cd93a74466cdb6cf2aa9bb28798 Mon Sep 17 00:00:00 2001
From: =?UTF-8?q?Cl=C3=A9ment=20Le=20Goffic?= <clement.legoffic(a)foss.st.com>
Date: Fri, 4 Jul 2025 10:39:15 +0200
Subject: [PATCH] i2c: stm32f7: unmap DMA mapped buffer
MIME-Version: 1.0
Content-Type: text/plain; charset=UTF-8
Content-Transfer-Encoding: 8bit
Before each I2C transfer using DMA, the I2C buffer is DMA'pped to make
sure the memory buffer is DMA'able. This is handle in the function
`stm32_i2c_prep_dma_xfer()`.
If the transfer fails for any reason the I2C buffer must be unmap.
Use the dma_callback to factorize the code and fix this issue.
Note that the `stm32f7_i2c_dma_callback()` is now called in case of DMA
transfer success and error and that the `complete()` on the dma_complete
completion structure is done inconditionnally in case of transfer
success or error as well as the `dmaengine_terminate_async()`.
This is allowed as a `complete()` in case transfer error has no effect
as well as a `dmaengine_terminate_async()` on a transfer success.
Also fix the unneeded cast and remove not more needed variables.
Fixes: 7ecc8cfde553 ("i2c: i2c-stm32f7: Add DMA support")
Signed-off-by: Clément Le Goffic <clement.legoffic(a)foss.st.com>
Cc: <stable(a)vger.kernel.org> # v4.18+
Acked-by: Alain Volmat <alain.volmat(a)foss.st.com>
Signed-off-by: Andi Shyti <andi.shyti(a)kernel.org>
Link: https://lore.kernel.org/r/20250704-i2c-upstream-v4-2-84a095a2c728@foss.st.c…
diff --git a/drivers/i2c/busses/i2c-stm32f7.c b/drivers/i2c/busses/i2c-stm32f7.c
index 817d081460c2..73a7b8894c0d 100644
--- a/drivers/i2c/busses/i2c-stm32f7.c
+++ b/drivers/i2c/busses/i2c-stm32f7.c
@@ -739,10 +739,11 @@ static void stm32f7_i2c_disable_dma_req(struct stm32f7_i2c_dev *i2c_dev)
static void stm32f7_i2c_dma_callback(void *arg)
{
- struct stm32f7_i2c_dev *i2c_dev = (struct stm32f7_i2c_dev *)arg;
+ struct stm32f7_i2c_dev *i2c_dev = arg;
struct stm32_i2c_dma *dma = i2c_dev->dma;
stm32f7_i2c_disable_dma_req(i2c_dev);
+ dmaengine_terminate_async(dma->chan_using);
dma_unmap_single(i2c_dev->dev, dma->dma_buf, dma->dma_len,
dma->dma_data_dir);
complete(&dma->dma_complete);
@@ -1510,7 +1511,6 @@ static irqreturn_t stm32f7_i2c_handle_isr_errs(struct stm32f7_i2c_dev *i2c_dev,
u16 addr = f7_msg->addr;
void __iomem *base = i2c_dev->base;
struct device *dev = i2c_dev->dev;
- struct stm32_i2c_dma *dma = i2c_dev->dma;
/* Bus error */
if (status & STM32F7_I2C_ISR_BERR) {
@@ -1551,10 +1551,8 @@ static irqreturn_t stm32f7_i2c_handle_isr_errs(struct stm32f7_i2c_dev *i2c_dev,
}
/* Disable dma */
- if (i2c_dev->use_dma) {
- stm32f7_i2c_disable_dma_req(i2c_dev);
- dmaengine_terminate_async(dma->chan_using);
- }
+ if (i2c_dev->use_dma)
+ stm32f7_i2c_dma_callback(i2c_dev);
i2c_dev->master_mode = false;
complete(&i2c_dev->complete);
@@ -1600,7 +1598,6 @@ static irqreturn_t stm32f7_i2c_isr_event_thread(int irq, void *data)
{
struct stm32f7_i2c_dev *i2c_dev = data;
struct stm32f7_i2c_msg *f7_msg = &i2c_dev->f7_msg;
- struct stm32_i2c_dma *dma = i2c_dev->dma;
void __iomem *base = i2c_dev->base;
u32 status, mask;
int ret;
@@ -1619,10 +1616,8 @@ static irqreturn_t stm32f7_i2c_isr_event_thread(int irq, void *data)
dev_dbg(i2c_dev->dev, "<%s>: Receive NACK (addr %x)\n",
__func__, f7_msg->addr);
writel_relaxed(STM32F7_I2C_ICR_NACKCF, base + STM32F7_I2C_ICR);
- if (i2c_dev->use_dma) {
- stm32f7_i2c_disable_dma_req(i2c_dev);
- dmaengine_terminate_async(dma->chan_using);
- }
+ if (i2c_dev->use_dma)
+ stm32f7_i2c_dma_callback(i2c_dev);
f7_msg->result = -ENXIO;
}
@@ -1640,8 +1635,7 @@ static irqreturn_t stm32f7_i2c_isr_event_thread(int irq, void *data)
ret = wait_for_completion_timeout(&i2c_dev->dma->dma_complete, HZ);
if (!ret) {
dev_dbg(i2c_dev->dev, "<%s>: Timed out\n", __func__);
- stm32f7_i2c_disable_dma_req(i2c_dev);
- dmaengine_terminate_async(dma->chan_using);
+ stm32f7_i2c_dma_callback(i2c_dev);
f7_msg->result = -ETIMEDOUT;
}
}
The patch below does not apply to the 5.10-stable tree.
If someone wants it applied there, or to any other stable or longterm
tree, then please email the backport, including the original git commit
id to <stable(a)vger.kernel.org>.
To reproduce the conflict and resubmit, you may use the following commands:
git fetch https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git/ linux-5.10.y
git checkout FETCH_HEAD
git cherry-pick -x 6aae87fe7f180cd93a74466cdb6cf2aa9bb28798
# <resolve conflicts, build, test, etc.>
git commit -s
git send-email --to '<stable(a)vger.kernel.org>' --in-reply-to '2025072106-unburned-armory-4501@gregkh' --subject-prefix 'PATCH 5.10.y' HEAD^..
Possible dependencies:
thanks,
greg k-h
------------------ original commit in Linus's tree ------------------
From 6aae87fe7f180cd93a74466cdb6cf2aa9bb28798 Mon Sep 17 00:00:00 2001
From: =?UTF-8?q?Cl=C3=A9ment=20Le=20Goffic?= <clement.legoffic(a)foss.st.com>
Date: Fri, 4 Jul 2025 10:39:15 +0200
Subject: [PATCH] i2c: stm32f7: unmap DMA mapped buffer
MIME-Version: 1.0
Content-Type: text/plain; charset=UTF-8
Content-Transfer-Encoding: 8bit
Before each I2C transfer using DMA, the I2C buffer is DMA'pped to make
sure the memory buffer is DMA'able. This is handle in the function
`stm32_i2c_prep_dma_xfer()`.
If the transfer fails for any reason the I2C buffer must be unmap.
Use the dma_callback to factorize the code and fix this issue.
Note that the `stm32f7_i2c_dma_callback()` is now called in case of DMA
transfer success and error and that the `complete()` on the dma_complete
completion structure is done inconditionnally in case of transfer
success or error as well as the `dmaengine_terminate_async()`.
This is allowed as a `complete()` in case transfer error has no effect
as well as a `dmaengine_terminate_async()` on a transfer success.
Also fix the unneeded cast and remove not more needed variables.
Fixes: 7ecc8cfde553 ("i2c: i2c-stm32f7: Add DMA support")
Signed-off-by: Clément Le Goffic <clement.legoffic(a)foss.st.com>
Cc: <stable(a)vger.kernel.org> # v4.18+
Acked-by: Alain Volmat <alain.volmat(a)foss.st.com>
Signed-off-by: Andi Shyti <andi.shyti(a)kernel.org>
Link: https://lore.kernel.org/r/20250704-i2c-upstream-v4-2-84a095a2c728@foss.st.c…
diff --git a/drivers/i2c/busses/i2c-stm32f7.c b/drivers/i2c/busses/i2c-stm32f7.c
index 817d081460c2..73a7b8894c0d 100644
--- a/drivers/i2c/busses/i2c-stm32f7.c
+++ b/drivers/i2c/busses/i2c-stm32f7.c
@@ -739,10 +739,11 @@ static void stm32f7_i2c_disable_dma_req(struct stm32f7_i2c_dev *i2c_dev)
static void stm32f7_i2c_dma_callback(void *arg)
{
- struct stm32f7_i2c_dev *i2c_dev = (struct stm32f7_i2c_dev *)arg;
+ struct stm32f7_i2c_dev *i2c_dev = arg;
struct stm32_i2c_dma *dma = i2c_dev->dma;
stm32f7_i2c_disable_dma_req(i2c_dev);
+ dmaengine_terminate_async(dma->chan_using);
dma_unmap_single(i2c_dev->dev, dma->dma_buf, dma->dma_len,
dma->dma_data_dir);
complete(&dma->dma_complete);
@@ -1510,7 +1511,6 @@ static irqreturn_t stm32f7_i2c_handle_isr_errs(struct stm32f7_i2c_dev *i2c_dev,
u16 addr = f7_msg->addr;
void __iomem *base = i2c_dev->base;
struct device *dev = i2c_dev->dev;
- struct stm32_i2c_dma *dma = i2c_dev->dma;
/* Bus error */
if (status & STM32F7_I2C_ISR_BERR) {
@@ -1551,10 +1551,8 @@ static irqreturn_t stm32f7_i2c_handle_isr_errs(struct stm32f7_i2c_dev *i2c_dev,
}
/* Disable dma */
- if (i2c_dev->use_dma) {
- stm32f7_i2c_disable_dma_req(i2c_dev);
- dmaengine_terminate_async(dma->chan_using);
- }
+ if (i2c_dev->use_dma)
+ stm32f7_i2c_dma_callback(i2c_dev);
i2c_dev->master_mode = false;
complete(&i2c_dev->complete);
@@ -1600,7 +1598,6 @@ static irqreturn_t stm32f7_i2c_isr_event_thread(int irq, void *data)
{
struct stm32f7_i2c_dev *i2c_dev = data;
struct stm32f7_i2c_msg *f7_msg = &i2c_dev->f7_msg;
- struct stm32_i2c_dma *dma = i2c_dev->dma;
void __iomem *base = i2c_dev->base;
u32 status, mask;
int ret;
@@ -1619,10 +1616,8 @@ static irqreturn_t stm32f7_i2c_isr_event_thread(int irq, void *data)
dev_dbg(i2c_dev->dev, "<%s>: Receive NACK (addr %x)\n",
__func__, f7_msg->addr);
writel_relaxed(STM32F7_I2C_ICR_NACKCF, base + STM32F7_I2C_ICR);
- if (i2c_dev->use_dma) {
- stm32f7_i2c_disable_dma_req(i2c_dev);
- dmaengine_terminate_async(dma->chan_using);
- }
+ if (i2c_dev->use_dma)
+ stm32f7_i2c_dma_callback(i2c_dev);
f7_msg->result = -ENXIO;
}
@@ -1640,8 +1635,7 @@ static irqreturn_t stm32f7_i2c_isr_event_thread(int irq, void *data)
ret = wait_for_completion_timeout(&i2c_dev->dma->dma_complete, HZ);
if (!ret) {
dev_dbg(i2c_dev->dev, "<%s>: Timed out\n", __func__);
- stm32f7_i2c_disable_dma_req(i2c_dev);
- dmaengine_terminate_async(dma->chan_using);
+ stm32f7_i2c_dma_callback(i2c_dev);
f7_msg->result = -ETIMEDOUT;
}
}