- Linux-stable-mirror - lists.linaro.org

[Linux-stable-mirror] Patch "usb: hcd: initialize hcd->flags to 0 when rm hcd" has been added to the 4.4-stable tree

by gregkh＠linuxfoundation.org

This is a note to let you know that I've just added the patch titled usb: hcd: initialize hcd->flags to 0 when rm hcd to the 4.4-stable tree which can be found at: http://www.kernel.org/git/?p=linux/kernel/git/stable/stable-queue.git;a=sum… The filename of the patch is: usb-hcd-initialize-hcd-flags-to-0-when-rm-hcd.patch and it can be found in the queue-4.4 subdirectory. If you, or anyone else, feels it should not be added to the stable tree, please let <stable(a)vger.kernel.org> know about it. >From foo@baz Thu Nov 9 18:22:51 CET 2017 From: William wu <wulf(a)rock-chips.com> Date: Fri, 13 Jan 2017 11:04:22 +0800 Subject: usb: hcd: initialize hcd->flags to 0 when rm hcd From: William wu <wulf(a)rock-chips.com> [ Upstream commit 76b8db0d480e8045e1a1902fc9ab143b3b9ef115 ] On some platforms(e.g. rk3399 board), we can call hcd_add/remove consecutively without calling usb_put_hcd/usb_create_hcd in between, so hcd->flags can be stale. If the HC dies due to whatever reason then without this patch we get the below error on next hcd_add. [173.296154] xhci-hcd xhci-hcd.2.auto: HC died; cleaning up [173.296209] xhci-hcd xhci-hcd.2.auto: xHCI Host Controller [173.296762] xhci-hcd xhci-hcd.2.auto: new USB bus registered, assigned bus number 6 [173.296931] usb usb6: We don't know the algorithms for LPM for this host, disabling LPM. [173.297179] usb usb6: New USB device found, idVendor=1d6b, idProduct=0003 [173.297203] usb usb6: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [173.297222] usb usb6: Product: xHCI Host Controller [173.297240] usb usb6: Manufacturer: Linux 4.4.21 xhci-hcd [173.297257] usb usb6: SerialNumber: xhci-hcd.2.auto [173.298680] hub 6-0:1.0: USB hub found [173.298749] hub 6-0:1.0: 1 port detected [173.299382] rockchip-dwc3 usb@fe800000: USB HOST connected [173.395418] hub 5-0:1.0: activate --> -19 [173.603447] irq 228: nobody cared (try booting with the "irqpoll" option) [173.603493] CPU: 0 PID: 0 Comm: swapper/0 Not tainted 4.4.21 #9 [173.603513] Hardware name: Google Kevin (DT) [173.603531] Call trace: [173.603568] [<ffffffc0002087dc>] dump_backtrace+0x0/0x160 [173.603596] [<ffffffc00020895c>] show_stack+0x20/0x28 [173.603623] [<ffffffc0004b28a8>] dump_stack+0x90/0xb0 [173.603650] [<ffffffc00027347c>] __report_bad_irq+0x48/0xe8 [173.603674] [<ffffffc0002737cc>] note_interrupt+0x1e8/0x28c [173.603698] [<ffffffc000270a38>] handle_irq_event_percpu+0x1d4/0x25c [173.603722] [<ffffffc000270b0c>] handle_irq_event+0x4c/0x7c [173.603748] [<ffffffc00027456c>] handle_fasteoi_irq+0xb4/0x124 [173.603777] [<ffffffc00026fe3c>] generic_handle_irq+0x30/0x44 [173.603804] [<ffffffc0002701a8>] __handle_domain_irq+0x90/0xbc [173.603827] [<ffffffc0002006f4>] gic_handle_irq+0xcc/0x188 ... [173.604500] [<ffffffc000203700>] el1_irq+0x80/0xf8 [173.604530] [<ffffffc000261388>] cpu_startup_entry+0x38/0x3cc [173.604558] [<ffffffc00090f7d8>] rest_init+0x8c/0x94 [173.604585] [<ffffffc000e009ac>] start_kernel+0x3d0/0x3fc [173.604607] [<0000000000b16000>] 0xb16000 [173.604622] handlers: [173.604648] [<ffffffc000642084>] usb_hcd_irq [173.604673] Disabling IRQ #228 Signed-off-by: William wu <wulf(a)rock-chips.com> Acked-by: Roger Quadros <rogerq(a)ti.com> Signed-off-by: Greg Kroah-Hartman <gregkh(a)linuxfoundation.org> Signed-off-by: Sasha Levin <alexander.levin(a)verizon.com> Signed-off-by: Greg Kroah-Hartman <gregkh(a)linuxfoundation.org> --- drivers/usb/core/hcd.c | 1 + 1 file changed, 1 insertion(+) --- a/drivers/usb/core/hcd.c +++ b/drivers/usb/core/hcd.c @@ -2997,6 +2997,7 @@ void usb_remove_hcd(struct usb_hcd *hcd) } usb_put_invalidate_rhdev(hcd); + hcd->flags = 0; } EXPORT_SYMBOL_GPL(usb_remove_hcd); Patches currently in stable-queue which might be from wulf(a)rock-chips.com are queue-4.4/usb-hcd-initialize-hcd-flags-to-0-when-rm-hcd.patch

7 years, 9 months

1
0
0 0

[Linux-stable-mirror] Patch "serial: sh-sci: Fix register offsets for the IRDA serial port" has been added to the 4.4-stable tree

by gregkh＠linuxfoundation.org

This is a note to let you know that I've just added the patch titled serial: sh-sci: Fix register offsets for the IRDA serial port to the 4.4-stable tree which can be found at: http://www.kernel.org/git/?p=linux/kernel/git/stable/stable-queue.git;a=sum… The filename of the patch is: serial-sh-sci-fix-register-offsets-for-the-irda-serial-port.patch and it can be found in the queue-4.4 subdirectory. If you, or anyone else, feels it should not be added to the stable tree, please let <stable(a)vger.kernel.org> know about it. >From foo@baz Thu Nov 9 18:22:51 CET 2017 From: Laurent Pinchart <laurent.pinchart+renesas(a)ideasonboard.com> Date: Wed, 11 Jan 2017 16:43:32 +0200 Subject: serial: sh-sci: Fix register offsets for the IRDA serial port From: Laurent Pinchart <laurent.pinchart+renesas(a)ideasonboard.com> [ Upstream commit a752ba18af8285e3eeda572f40dddaebff0c3621 ] Even though most of its registers are 8-bit wide, the IRDA has two 16-bit registers that make it a 16-bit peripheral and not a 8-bit peripheral with addresses shifted by one. Fix the registers offset in the driver and the platform data regshift value. Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas(a)ideasonboard.com> Reviewed-by: Geert Uytterhoeven <geert+renesas(a)glider.be> Signed-off-by: Greg Kroah-Hartman <gregkh(a)linuxfoundation.org> Signed-off-by: Sasha Levin <alexander.levin(a)verizon.com> Signed-off-by: Greg Kroah-Hartman <gregkh(a)linuxfoundation.org> --- arch/sh/kernel/cpu/sh3/setup-sh770x.c | 1 - drivers/tty/serial/sh-sci.c | 17 ++++++++--------- 2 files changed, 8 insertions(+), 10 deletions(-) --- a/arch/sh/kernel/cpu/sh3/setup-sh770x.c +++ b/arch/sh/kernel/cpu/sh3/setup-sh770x.c @@ -165,7 +165,6 @@ static struct plat_sci_port scif2_platfo .scscr = SCSCR_TE | SCSCR_RE, .type = PORT_IRDA, .ops = &sh770x_sci_port_ops, - .regshift = 1, }; static struct resource scif2_resources[] = { --- a/drivers/tty/serial/sh-sci.c +++ b/drivers/tty/serial/sh-sci.c @@ -163,18 +163,17 @@ static const struct plat_sci_reg sci_reg }, /* - * Common definitions for legacy IrDA ports, dependent on - * regshift value. + * Common definitions for legacy IrDA ports. */ [SCIx_IRDA_REGTYPE] = { [SCSMR] = { 0x00, 8 }, - [SCBRR] = { 0x01, 8 }, - [SCSCR] = { 0x02, 8 }, - [SCxTDR] = { 0x03, 8 }, - [SCxSR] = { 0x04, 8 }, - [SCxRDR] = { 0x05, 8 }, - [SCFCR] = { 0x06, 8 }, - [SCFDR] = { 0x07, 16 }, + [SCBRR] = { 0x02, 8 }, + [SCSCR] = { 0x04, 8 }, + [SCxTDR] = { 0x06, 8 }, + [SCxSR] = { 0x08, 16 }, + [SCxRDR] = { 0x0a, 8 }, + [SCFCR] = { 0x0c, 8 }, + [SCFDR] = { 0x0e, 16 }, [SCTFDR] = sci_reg_invalid, [SCRFDR] = sci_reg_invalid, [SCSPTR] = sci_reg_invalid, Patches currently in stable-queue which might be from laurent.pinchart+renesas(a)ideasonboard.com are queue-4.4/serial-sh-sci-fix-register-offsets-for-the-irda-serial-port.patch

7 years, 9 months

1
0
0 0

[Linux-stable-mirror] Patch "powerpc/corenet: explicitly disable the SDHC controller on kmcoge4" has been added to the 4.4-stable tree

by gregkh＠linuxfoundation.org

This is a note to let you know that I've just added the patch titled powerpc/corenet: explicitly disable the SDHC controller on kmcoge4 to the 4.4-stable tree which can be found at: http://www.kernel.org/git/?p=linux/kernel/git/stable/stable-queue.git;a=sum… The filename of the patch is: powerpc-corenet-explicitly-disable-the-sdhc-controller-on-kmcoge4.patch and it can be found in the queue-4.4 subdirectory. If you, or anyone else, feels it should not be added to the stable tree, please let <stable(a)vger.kernel.org> know about it. >From foo@baz Thu Nov 9 18:22:51 CET 2017 From: Valentin Longchamp <valentin.longchamp(a)keymile.com> Date: Thu, 15 Dec 2016 14:22:26 +0100 Subject: powerpc/corenet: explicitly disable the SDHC controller on kmcoge4 From: Valentin Longchamp <valentin.longchamp(a)keymile.com> [ Upstream commit a674c7d470bb47e82f4eb1fa944eadeac2f6bbaf ] It is not implemented on the kmcoge4 hardware and if not disabled it leads to error messages with the corenet32_smp_defconfig. Signed-off-by: Valentin Longchamp <valentin.longchamp(a)keymile.com> Signed-off-by: Scott Wood <oss(a)buserror.net> Signed-off-by: Sasha Levin <alexander.levin(a)verizon.com> Signed-off-by: Greg Kroah-Hartman <gregkh(a)linuxfoundation.org> --- arch/powerpc/boot/dts/fsl/kmcoge4.dts | 4 ++++ 1 file changed, 4 insertions(+) --- a/arch/powerpc/boot/dts/fsl/kmcoge4.dts +++ b/arch/powerpc/boot/dts/fsl/kmcoge4.dts @@ -83,6 +83,10 @@ }; }; + sdhc@114000 { + status = "disabled"; + }; + i2c@119000 { status = "disabled"; }; Patches currently in stable-queue which might be from valentin.longchamp(a)keymile.com are queue-4.4/powerpc-corenet-explicitly-disable-the-sdhc-controller-on-kmcoge4.patch

7 years, 9 months

1
0
0 0

[Linux-stable-mirror] Patch "s390/qeth: issue STARTLAN as first IPA command" has been added to the 4.4-stable tree

by gregkh＠linuxfoundation.org

This is a note to let you know that I've just added the patch titled s390/qeth: issue STARTLAN as first IPA command to the 4.4-stable tree which can be found at: http://www.kernel.org/git/?p=linux/kernel/git/stable/stable-queue.git;a=sum… The filename of the patch is: s390-qeth-issue-startlan-as-first-ipa-command.patch and it can be found in the queue-4.4 subdirectory. If you, or anyone else, feels it should not be added to the stable tree, please let <stable(a)vger.kernel.org> know about it. >From foo@baz Thu Nov 9 18:22:51 CET 2017 From: Julian Wiedmann <jwi(a)linux.vnet.ibm.com> Date: Thu, 12 Jan 2017 15:48:42 +0100 Subject: s390/qeth: issue STARTLAN as first IPA command From: Julian Wiedmann <jwi(a)linux.vnet.ibm.com> [ Upstream commit 1034051045d125579ab1e8fcd5a724eeb0e70149 ] STARTLAN needs to be the first IPA command after MPC initialization completes. So move the qeth_send_startlan() call from the layer disciplines into the core path, right after the MPC handshake. While at it, replace the magic LAN OFFLINE return code with the existing enum. Signed-off-by: Julian Wiedmann <jwi(a)linux.vnet.ibm.com> Reviewed-by: Thomas Richter <tmricht(a)linux.vnet.ibm.com> Reviewed-by: Ursula Braun <ubraun(a)linux.vnet.ibm.com> Signed-off-by: David S. Miller <davem(a)davemloft.net> Signed-off-by: Sasha Levin <alexander.levin(a)verizon.com> Signed-off-by: Greg Kroah-Hartman <gregkh(a)linuxfoundation.org> --- drivers/s390/net/qeth_core.h | 1 - drivers/s390/net/qeth_core_main.c | 21 +++++++++++++++++---- drivers/s390/net/qeth_l2_main.c | 15 --------------- drivers/s390/net/qeth_l3_main.c | 15 --------------- 4 files changed, 17 insertions(+), 35 deletions(-) --- a/drivers/s390/net/qeth_core.h +++ b/drivers/s390/net/qeth_core.h @@ -909,7 +909,6 @@ void qeth_clear_thread_running_bit(struc int qeth_core_hardsetup_card(struct qeth_card *); void qeth_print_status_message(struct qeth_card *); int qeth_init_qdio_queues(struct qeth_card *); -int qeth_send_startlan(struct qeth_card *); int qeth_send_ipa_cmd(struct qeth_card *, struct qeth_cmd_buffer *, int (*reply_cb) (struct qeth_card *, struct qeth_reply *, unsigned long), --- a/drivers/s390/net/qeth_core_main.c +++ b/drivers/s390/net/qeth_core_main.c @@ -2955,7 +2955,7 @@ int qeth_send_ipa_cmd(struct qeth_card * } EXPORT_SYMBOL_GPL(qeth_send_ipa_cmd); -int qeth_send_startlan(struct qeth_card *card) +static int qeth_send_startlan(struct qeth_card *card) { int rc; struct qeth_cmd_buffer *iob; @@ -2968,7 +2968,6 @@ int qeth_send_startlan(struct qeth_card rc = qeth_send_ipa_cmd(card, iob, NULL, NULL); return rc; } -EXPORT_SYMBOL_GPL(qeth_send_startlan); static int qeth_default_setadapterparms_cb(struct qeth_card *card, struct qeth_reply *reply, unsigned long data) @@ -5080,6 +5079,20 @@ retriable: goto out; } + rc = qeth_send_startlan(card); + if (rc) { + QETH_DBF_TEXT_(SETUP, 2, "6err%d", rc); + if (rc == IPA_RC_LAN_OFFLINE) { + dev_warn(&card->gdev->dev, + "The LAN is offline\n"); + card->lan_online = 0; + } else { + rc = -ENODEV; + goto out; + } + } else + card->lan_online = 1; + card->options.ipa4.supported_funcs = 0; card->options.ipa6.supported_funcs = 0; card->options.adp.supported_funcs = 0; @@ -5091,14 +5104,14 @@ retriable: if (qeth_is_supported(card, IPA_SETADAPTERPARMS)) { rc = qeth_query_setadapterparms(card); if (rc < 0) { - QETH_DBF_TEXT_(SETUP, 2, "6err%d", rc); + QETH_DBF_TEXT_(SETUP, 2, "7err%d", rc); goto out; } } if (qeth_adp_supported(card, IPA_SETADP_SET_DIAG_ASSIST)) { rc = qeth_query_setdiagass(card); if (rc < 0) { - QETH_DBF_TEXT_(SETUP, 2, "7err%d", rc); + QETH_DBF_TEXT_(SETUP, 2, "8err%d", rc); goto out; } } --- a/drivers/s390/net/qeth_l2_main.c +++ b/drivers/s390/net/qeth_l2_main.c @@ -1203,21 +1203,6 @@ static int __qeth_l2_set_online(struct c /* softsetup */ QETH_DBF_TEXT(SETUP, 2, "softsetp"); - rc = qeth_send_startlan(card); - if (rc) { - QETH_DBF_TEXT_(SETUP, 2, "1err%d", rc); - if (rc == 0xe080) { - dev_warn(&card->gdev->dev, - "The LAN is offline\n"); - card->lan_online = 0; - goto contin; - } - rc = -ENODEV; - goto out_remove; - } else - card->lan_online = 1; - -contin: if ((card->info.type == QETH_CARD_TYPE_OSD) || (card->info.type == QETH_CARD_TYPE_OSX)) { if (qeth_l2_start_ipassists(card)) --- a/drivers/s390/net/qeth_l3_main.c +++ b/drivers/s390/net/qeth_l3_main.c @@ -3298,21 +3298,6 @@ static int __qeth_l3_set_online(struct c /* softsetup */ QETH_DBF_TEXT(SETUP, 2, "softsetp"); - rc = qeth_send_startlan(card); - if (rc) { - QETH_DBF_TEXT_(SETUP, 2, "1err%d", rc); - if (rc == 0xe080) { - dev_warn(&card->gdev->dev, - "The LAN is offline\n"); - card->lan_online = 0; - goto contin; - } - rc = -ENODEV; - goto out_remove; - } else - card->lan_online = 1; - -contin: rc = qeth_l3_setadapter_parms(card); if (rc) QETH_DBF_TEXT_(SETUP, 2, "2err%04x", rc); Patches currently in stable-queue which might be from jwi(a)linux.vnet.ibm.com are queue-4.4/s390-qeth-issue-startlan-as-first-ipa-command.patch

7 years, 9 months

1
0
0 0

[Linux-stable-mirror] Patch "phy: increase size of MII_BUS_ID_SIZE and bus_id" has been added to the 4.4-stable tree

by gregkh＠linuxfoundation.org

This is a note to let you know that I've just added the patch titled phy: increase size of MII_BUS_ID_SIZE and bus_id to the 4.4-stable tree which can be found at: http://www.kernel.org/git/?p=linux/kernel/git/stable/stable-queue.git;a=sum… The filename of the patch is: phy-increase-size-of-mii_bus_id_size-and-bus_id.patch and it can be found in the queue-4.4 subdirectory. If you, or anyone else, feels it should not be added to the stable tree, please let <stable(a)vger.kernel.org> know about it. >From foo@baz Thu Nov 9 18:22:51 CET 2017 From: Volodymyr Bendiuga <volodymyr.bendiuga(a)gmail.com> Date: Thu, 19 Jan 2017 17:05:04 +0100 Subject: phy: increase size of MII_BUS_ID_SIZE and bus_id From: Volodymyr Bendiuga <volodymyr.bendiuga(a)gmail.com> [ Upstream commit 4567d686f5c6d955e57a3afa1741944c1e7f4033 ] Some bus names are pretty long and do not fit into 17 chars. Increase therefore MII_BUS_ID_SIZE and phy_fixup.bus_id to larger number. Now mii_bus.id can host larger name. Signed-off-by: Volodymyr Bendiuga <volodymyr.bendiuga(a)gmail.com> Signed-off-by: Magnus Öberg <magnus.oberg(a)westermo.se> Reviewed-by: Andrew Lunn <andrew(a)lunn.ch> Signed-off-by: David S. Miller <davem(a)davemloft.net> Signed-off-by: Sasha Levin <alexander.levin(a)verizon.com> Signed-off-by: Greg Kroah-Hartman <gregkh(a)linuxfoundation.org> --- include/linux/phy.h | 8 ++------ 1 file changed, 2 insertions(+), 6 deletions(-) --- a/include/linux/phy.h +++ b/include/linux/phy.h @@ -136,11 +136,7 @@ static inline const char *phy_modes(phy_ /* Used when trying to connect to a specific phy (mii bus id:phy device id) */ #define PHY_ID_FMT "%s:%02x" -/* - * Need to be a little smaller than phydev->dev.bus_id to leave room - * for the ":%02x" - */ -#define MII_BUS_ID_SIZE (20 - 3) +#define MII_BUS_ID_SIZE 61 /* Or MII_ADDR_C45 into regnum for read/write on mii_bus to enable the 21 bit IEEE 802.3ae clause 45 addressing mode used by 10GIGE phy chips. */ @@ -599,7 +595,7 @@ struct phy_driver { /* A Structure for boards to register fixups with the PHY Lib */ struct phy_fixup { struct list_head list; - char bus_id[20]; + char bus_id[MII_BUS_ID_SIZE + 3]; u32 phy_uid; u32 phy_uid_mask; int (*run)(struct phy_device *phydev); Patches currently in stable-queue which might be from volodymyr.bendiuga(a)gmail.com are queue-4.4/phy-increase-size-of-mii_bus_id_size-and-bus_id.patch

7 years, 9 months

1
0
0 0

[Linux-stable-mirror] Patch "PCI: mvebu: Handle changes to the bridge windows while enabled" has been added to the 4.4-stable tree

by gregkh＠linuxfoundation.org

This is a note to let you know that I've just added the patch titled PCI: mvebu: Handle changes to the bridge windows while enabled to the 4.4-stable tree which can be found at: http://www.kernel.org/git/?p=linux/kernel/git/stable/stable-queue.git;a=sum… The filename of the patch is: pci-mvebu-handle-changes-to-the-bridge-windows-while-enabled.patch and it can be found in the queue-4.4 subdirectory. If you, or anyone else, feels it should not be added to the stable tree, please let <stable(a)vger.kernel.org> know about it. >From foo@baz Thu Nov 9 18:22:51 CET 2017 From: Jason Gunthorpe <jgunthorpe(a)obsidianresearch.com> Date: Mon, 12 Dec 2016 11:30:20 -0700 Subject: PCI: mvebu: Handle changes to the bridge windows while enabled From: Jason Gunthorpe <jgunthorpe(a)obsidianresearch.com> [ Upstream commit d9bf28e2650fe3eeefed7e34841aea07d10c6543 ] The PCI core will write to the bridge window config multiple times while they are enabled. This can lead to mbus failures like this: mvebu_mbus: cannot add window '4:e8', conflicts with another window mvebu-pcie mbus:pex@e0000000: Could not create MBus window at [mem 0xe0000000-0xe00fffff]: -22 For me this is happening during a hotplug cycle. The PCI core is not changing the values, just writing them twice while active. The patch addresses the general case of any change to an active window, but not atomically. The code is slightly refactored so io and mem can share more of the window logic. Signed-off-by: Jason Gunthorpe <jgunthorpe(a)obsidianresearch.com> Signed-off-by: Bjorn Helgaas <bhelgaas(a)google.com> Acked-by: Jason Cooper <jason(a)lakedaemon.net> Signed-off-by: Sasha Levin <alexander.levin(a)verizon.com> Signed-off-by: Greg Kroah-Hartman <gregkh(a)linuxfoundation.org> --- drivers/pci/host/pci-mvebu.c | 101 +++++++++++++++++++++++++------------------ 1 file changed, 60 insertions(+), 41 deletions(-) --- a/drivers/pci/host/pci-mvebu.c +++ b/drivers/pci/host/pci-mvebu.c @@ -131,6 +131,12 @@ struct mvebu_pcie { int nports; }; +struct mvebu_pcie_window { + phys_addr_t base; + phys_addr_t remap; + size_t size; +}; + /* Structure representing one PCIe interface */ struct mvebu_pcie_port { char *name; @@ -148,10 +154,8 @@ struct mvebu_pcie_port { struct mvebu_sw_pci_bridge bridge; struct device_node *dn; struct mvebu_pcie *pcie; - phys_addr_t memwin_base; - size_t memwin_size; - phys_addr_t iowin_base; - size_t iowin_size; + struct mvebu_pcie_window memwin; + struct mvebu_pcie_window iowin; u32 saved_pcie_stat; }; @@ -377,23 +381,45 @@ static void mvebu_pcie_add_windows(struc } } +static void mvebu_pcie_set_window(struct mvebu_pcie_port *port, + unsigned int target, unsigned int attribute, + const struct mvebu_pcie_window *desired, + struct mvebu_pcie_window *cur) +{ + if (desired->base == cur->base && desired->remap == cur->remap && + desired->size == cur->size) + return; + + if (cur->size != 0) { + mvebu_pcie_del_windows(port, cur->base, cur->size); + cur->size = 0; + cur->base = 0; + + /* + * If something tries to change the window while it is enabled + * the change will not be done atomically. That would be + * difficult to do in the general case. + */ + } + + if (desired->size == 0) + return; + + mvebu_pcie_add_windows(port, target, attribute, desired->base, + desired->size, desired->remap); + *cur = *desired; +} + static void mvebu_pcie_handle_iobase_change(struct mvebu_pcie_port *port) { - phys_addr_t iobase; + struct mvebu_pcie_window desired = {}; /* Are the new iobase/iolimit values invalid? */ if (port->bridge.iolimit < port->bridge.iobase || port->bridge.iolimitupper < port->bridge.iobaseupper || !(port->bridge.command & PCI_COMMAND_IO)) { - - /* If a window was configured, remove it */ - if (port->iowin_base) { - mvebu_pcie_del_windows(port, port->iowin_base, - port->iowin_size); - port->iowin_base = 0; - port->iowin_size = 0; - } - + mvebu_pcie_set_window(port, port->io_target, port->io_attr, + &desired, &port->iowin); return; } @@ -410,32 +436,27 @@ static void mvebu_pcie_handle_iobase_cha * specifications. iobase is the bus address, port->iowin_base * is the CPU address. */ - iobase = ((port->bridge.iobase & 0xF0) << 8) | - (port->bridge.iobaseupper << 16); - port->iowin_base = port->pcie->io.start + iobase; - port->iowin_size = ((0xFFF | ((port->bridge.iolimit & 0xF0) << 8) | - (port->bridge.iolimitupper << 16)) - - iobase) + 1; - - mvebu_pcie_add_windows(port, port->io_target, port->io_attr, - port->iowin_base, port->iowin_size, - iobase); + desired.remap = ((port->bridge.iobase & 0xF0) << 8) | + (port->bridge.iobaseupper << 16); + desired.base = port->pcie->io.start + desired.remap; + desired.size = ((0xFFF | ((port->bridge.iolimit & 0xF0) << 8) | + (port->bridge.iolimitupper << 16)) - + desired.remap) + + 1; + + mvebu_pcie_set_window(port, port->io_target, port->io_attr, &desired, + &port->iowin); } static void mvebu_pcie_handle_membase_change(struct mvebu_pcie_port *port) { + struct mvebu_pcie_window desired = {.remap = MVEBU_MBUS_NO_REMAP}; + /* Are the new membase/memlimit values invalid? */ if (port->bridge.memlimit < port->bridge.membase || !(port->bridge.command & PCI_COMMAND_MEMORY)) { - - /* If a window was configured, remove it */ - if (port->memwin_base) { - mvebu_pcie_del_windows(port, port->memwin_base, - port->memwin_size); - port->memwin_base = 0; - port->memwin_size = 0; - } - + mvebu_pcie_set_window(port, port->mem_target, port->mem_attr, + &desired, &port->memwin); return; } @@ -445,14 +466,12 @@ static void mvebu_pcie_handle_membase_ch * window to setup, according to the PCI-to-PCI bridge * specifications. */ - port->memwin_base = ((port->bridge.membase & 0xFFF0) << 16); - port->memwin_size = - (((port->bridge.memlimit & 0xFFF0) << 16) | 0xFFFFF) - - port->memwin_base + 1; - - mvebu_pcie_add_windows(port, port->mem_target, port->mem_attr, - port->memwin_base, port->memwin_size, - MVEBU_MBUS_NO_REMAP); + desired.base = ((port->bridge.membase & 0xFFF0) << 16); + desired.size = (((port->bridge.memlimit & 0xFFF0) << 16) | 0xFFFFF) - + desired.base + 1; + + mvebu_pcie_set_window(port, port->mem_target, port->mem_attr, &desired, + &port->memwin); } /* Patches currently in stable-queue which might be from jgunthorpe(a)obsidianresearch.com are queue-4.4/pci-mvebu-handle-changes-to-the-bridge-windows-while-enabled.patch

7 years, 9 months

1
0
0 0

[Linux-stable-mirror] Patch "net: dsa: select NET_SWITCHDEV" has been added to the 4.4-stable tree

by gregkh＠linuxfoundation.org

This is a note to let you know that I've just added the patch titled net: dsa: select NET_SWITCHDEV to the 4.4-stable tree which can be found at: http://www.kernel.org/git/?p=linux/kernel/git/stable/stable-queue.git;a=sum… The filename of the patch is: net-dsa-select-net_switchdev.patch and it can be found in the queue-4.4 subdirectory. If you, or anyone else, feels it should not be added to the stable tree, please let <stable(a)vger.kernel.org> know about it. >From foo@baz Thu Nov 9 18:22:51 CET 2017 From: Vivien Didelot <vivien.didelot(a)savoirfairelinux.com> Date: Mon, 9 Jan 2017 16:49:26 -0500 Subject: net: dsa: select NET_SWITCHDEV From: Vivien Didelot <vivien.didelot(a)savoirfairelinux.com> [ Upstream commit 3a89eaa65db68bf53bf92dedc60084f810e1779a ] The support for DSA Ethernet switch chips depends on TCP/IP networking, thus explicit that HAVE_NET_DSA depends on INET. DSA uses SWITCHDEV, thus select it instead of depending on it. Signed-off-by: Vivien Didelot <vivien.didelot(a)savoirfairelinux.com> Reviewed-by: Andrew Lunn <andrew(a)lunn.ch> Reviewed-by: Florian Fainelli <f.fainelli(a)gmail.com> Tested-by: Randy Dunlap <rdunlap(a)infradead.org> Signed-off-by: David S. Miller <davem(a)davemloft.net> Signed-off-by: Sasha Levin <alexander.levin(a)verizon.com> Signed-off-by: Greg Kroah-Hartman <gregkh(a)linuxfoundation.org> --- net/dsa/Kconfig | 5 +++-- 1 file changed, 3 insertions(+), 2 deletions(-) --- a/net/dsa/Kconfig +++ b/net/dsa/Kconfig @@ -1,12 +1,13 @@ config HAVE_NET_DSA def_bool y - depends on NETDEVICES && !S390 + depends on INET && NETDEVICES && !S390 # Drivers must select NET_DSA and the appropriate tagging format config NET_DSA tristate "Distributed Switch Architecture" - depends on HAVE_NET_DSA && NET_SWITCHDEV + depends on HAVE_NET_DSA + select NET_SWITCHDEV select PHYLIB ---help--- Say Y if you want to enable support for the hardware switches supported Patches currently in stable-queue which might be from vivien.didelot(a)savoirfairelinux.com are queue-4.4/net-dsa-select-net_switchdev.patch

7 years, 9 months

1
0
0 0

[Linux-stable-mirror] Patch "netfilter: nft_meta: deal with PACKET_LOOPBACK in netdev family" has been added to the 4.4-stable tree

by gregkh＠linuxfoundation.org

This is a note to let you know that I've just added the patch titled netfilter: nft_meta: deal with PACKET_LOOPBACK in netdev family to the 4.4-stable tree which can be found at: http://www.kernel.org/git/?p=linux/kernel/git/stable/stable-queue.git;a=sum… The filename of the patch is: netfilter-nft_meta-deal-with-packet_loopback-in-netdev-family.patch and it can be found in the queue-4.4 subdirectory. If you, or anyone else, feels it should not be added to the stable tree, please let <stable(a)vger.kernel.org> know about it. >From foo@baz Thu Nov 9 18:22:51 CET 2017 From: Liping Zhang <zlpnobody(a)gmail.com> Date: Sat, 7 Jan 2017 21:33:55 +0800 Subject: netfilter: nft_meta: deal with PACKET_LOOPBACK in netdev family From: Liping Zhang <zlpnobody(a)gmail.com> [ Upstream commit f169fd695b192dd7b23aff8e69d25a1bc881bbfa ] After adding the following nft rule, then ping 224.0.0.1: # nft add rule netdev t c pkttype host counter The warning complain message will be printed out again and again: WARNING: CPU: 0 PID: 10182 at net/netfilter/nft_meta.c:163 \ nft_meta_get_eval+0x3fe/0x460 [nft_meta] [...] Call Trace: <IRQ> dump_stack+0x85/0xc2 __warn+0xcb/0xf0 warn_slowpath_null+0x1d/0x20 nft_meta_get_eval+0x3fe/0x460 [nft_meta] nft_do_chain+0xff/0x5e0 [nf_tables] So we should deal with PACKET_LOOPBACK in netdev family too. For ipv4, convert it to PACKET_BROADCAST/MULTICAST according to the destination address's type; For ipv6, convert it to PACKET_MULTICAST directly. Signed-off-by: Liping Zhang <zlpnobody(a)gmail.com> Signed-off-by: Pablo Neira Ayuso <pablo(a)netfilter.org> Signed-off-by: Sasha Levin <alexander.levin(a)verizon.com> Signed-off-by: Greg Kroah-Hartman <gregkh(a)linuxfoundation.org> --- net/netfilter/nft_meta.c | 28 +++++++++++++++++++++++++++- 1 file changed, 27 insertions(+), 1 deletion(-) --- a/net/netfilter/nft_meta.c +++ b/net/netfilter/nft_meta.c @@ -151,8 +151,34 @@ void nft_meta_get_eval(const struct nft_ else *dest = PACKET_BROADCAST; break; + case NFPROTO_NETDEV: + switch (skb->protocol) { + case htons(ETH_P_IP): { + int noff = skb_network_offset(skb); + struct iphdr *iph, _iph; + + iph = skb_header_pointer(skb, noff, + sizeof(_iph), &_iph); + if (!iph) + goto err; + + if (ipv4_is_multicast(iph->daddr)) + *dest = PACKET_MULTICAST; + else + *dest = PACKET_BROADCAST; + + break; + } + case htons(ETH_P_IPV6): + *dest = PACKET_MULTICAST; + break; + default: + WARN_ON_ONCE(1); + goto err; + } + break; default: - WARN_ON(1); + WARN_ON_ONCE(1); goto err; } break; Patches currently in stable-queue which might be from zlpnobody(a)gmail.com are queue-4.4/netfilter-nft_meta-deal-with-packet_loopback-in-netdev-family.patch

7 years, 9 months

1
0
0 0

[Linux-stable-mirror] Patch "IPsec: do not ignore crypto err in ah4 input" has been added to the 4.4-stable tree

by gregkh＠linuxfoundation.org

This is a note to let you know that I've just added the patch titled IPsec: do not ignore crypto err in ah4 input to the 4.4-stable tree which can be found at: http://www.kernel.org/git/?p=linux/kernel/git/stable/stable-queue.git;a=sum… The filename of the patch is: ipsec-do-not-ignore-crypto-err-in-ah4-input.patch and it can be found in the queue-4.4 subdirectory. If you, or anyone else, feels it should not be added to the stable tree, please let <stable(a)vger.kernel.org> know about it. >From foo@baz Thu Nov 9 18:22:51 CET 2017 From: Gilad Ben-Yossef <gilad(a)benyossef.com> Date: Mon, 16 Jan 2017 13:17:55 +0200 Subject: IPsec: do not ignore crypto err in ah4 input From: Gilad Ben-Yossef <gilad(a)benyossef.com> [ Upstream commit ebd89a2d0675f1325c2be5b7576fd8cb7e8defd0 ] ah4 input processing uses the asynchronous hash crypto API which supplies an error code as part of the operation completion but the error code was being ignored. Treat a crypto API error indication as a verification failure. While a crypto API reported error would almost certainly result in a memcpy of the digest failing anyway and thus the security risk seems minor, performing a memory compare on what might be uninitialized memory is wrong. Signed-off-by: Gilad Ben-Yossef <gilad(a)benyossef.com> Signed-off-by: Steffen Klassert <steffen.klassert(a)secunet.com> Signed-off-by: Sasha Levin <alexander.levin(a)verizon.com> Signed-off-by: Greg Kroah-Hartman <gregkh(a)linuxfoundation.org> --- net/ipv4/ah4.c | 3 +++ 1 file changed, 3 insertions(+) --- a/net/ipv4/ah4.c +++ b/net/ipv4/ah4.c @@ -270,6 +270,9 @@ static void ah_input_done(struct crypto_ int ihl = ip_hdrlen(skb); int ah_hlen = (ah->hdrlen + 2) << 2; + if (err) + goto out; + work_iph = AH_SKB_CB(skb)->tmp; auth_data = ah_tmp_auth(work_iph, ihl); icv = ah_tmp_icv(ahp->ahash, auth_data, ahp->icv_trunc_len); Patches currently in stable-queue which might be from gilad(a)benyossef.com are queue-4.4/ipsec-do-not-ignore-crypto-err-in-ah4-input.patch

7 years, 9 months

1
0
0 0

[Linux-stable-mirror] Patch "KVM: PPC: Book 3S: XICS: correct the real mode ICP rejecting counter" has been added to the 4.4-stable tree

by gregkh＠linuxfoundation.org

This is a note to let you know that I've just added the patch titled KVM: PPC: Book 3S: XICS: correct the real mode ICP rejecting counter to the 4.4-stable tree which can be found at: http://www.kernel.org/git/?p=linux/kernel/git/stable/stable-queue.git;a=sum… The filename of the patch is: kvm-ppc-book-3s-xics-correct-the-real-mode-icp-rejecting-counter.patch and it can be found in the queue-4.4 subdirectory. If you, or anyone else, feels it should not be added to the stable tree, please let <stable(a)vger.kernel.org> know about it. >From foo@baz Thu Nov 9 18:22:51 CET 2017 From: Li Zhong <zhong(a)linux.vnet.ibm.com> Date: Fri, 11 Nov 2016 12:57:33 +0800 Subject: KVM: PPC: Book 3S: XICS: correct the real mode ICP rejecting counter From: Li Zhong <zhong(a)linux.vnet.ibm.com> [ Upstream commit 37451bc95dee0e666927d6ffdda302dbbaaae6fa ] Some counters are added in Commit 6e0365b78273 ("KVM: PPC: Book3S HV: Add ICP real mode counters"), to provide some performance statistics to determine whether further optimizing is needed for real mode functions. The n_reject counter counts how many times ICP rejects an irq because of priority in real mode. The redelivery of an lsi that is still asserted after eoi doesn't fall into this category, so the increasement there is removed. Also, it needs to be increased in icp_rm_deliver_irq() if it rejects another one. Signed-off-by: Li Zhong <zhong(a)linux.vnet.ibm.com> Signed-off-by: Paul Mackerras <paulus(a)ozlabs.org> Signed-off-by: Sasha Levin <alexander.levin(a)verizon.com> Signed-off-by: Greg Kroah-Hartman <gregkh(a)linuxfoundation.org> --- arch/powerpc/kvm/book3s_hv_rm_xics.c | 5 ++--- 1 file changed, 2 insertions(+), 3 deletions(-) --- a/arch/powerpc/kvm/book3s_hv_rm_xics.c +++ b/arch/powerpc/kvm/book3s_hv_rm_xics.c @@ -280,6 +280,7 @@ static void icp_rm_deliver_irq(struct kv */ if (reject && reject != XICS_IPI) { arch_spin_unlock(&ics->lock); + icp->n_reject++; new_irq = reject; goto again; } @@ -611,10 +612,8 @@ int kvmppc_rm_h_eoi(struct kvm_vcpu *vcp state = &ics->irq_state[src]; /* Still asserted, resend it */ - if (state->asserted) { - icp->n_reject++; + if (state->asserted) icp_rm_deliver_irq(xics, icp, irq); - } if (!hlist_empty(&vcpu->kvm->irq_ack_notifier_list)) { icp->rm_action |= XICS_RM_NOTIFY_EOI; Patches currently in stable-queue which might be from zhong(a)linux.vnet.ibm.com are queue-4.4/crypto-vmx-disable-preemption-to-enable-vsx-in-aes_ctr.c.patch queue-4.4/kvm-ppc-book-3s-xics-correct-the-real-mode-icp-rejecting-counter.patch

7 years, 9 months

1
0
0 0

[Linux-stable-mirror] Patch "Input: mpr121 - handle multiple bits change of status register" has been added to the 4.4-stable tree

by gregkh＠linuxfoundation.org

This is a note to let you know that I've just added the patch titled Input: mpr121 - handle multiple bits change of status register to the 4.4-stable tree which can be found at: http://www.kernel.org/git/?p=linux/kernel/git/stable/stable-queue.git;a=sum… The filename of the patch is: input-mpr121-handle-multiple-bits-change-of-status-register.patch and it can be found in the queue-4.4 subdirectory. If you, or anyone else, feels it should not be added to the stable tree, please let <stable(a)vger.kernel.org> know about it. >From foo@baz Thu Nov 9 18:22:51 CET 2017 From: Akinobu Mita <akinobu.mita(a)gmail.com> Date: Sun, 15 Jan 2017 14:44:30 -0800 Subject: Input: mpr121 - handle multiple bits change of status register From: Akinobu Mita <akinobu.mita(a)gmail.com> [ Upstream commit 08fea55e37f58371bffc5336a59e55d1f155955a ] This driver reports input events on their interrupts which are triggered by the sensor's status register changes. But only single bit change is reported in the interrupt handler. So if there are multiple bits are changed at almost the same time, other press or release events are ignored. This fixes it by detecting all changed bits in the status register. Signed-off-by: Akinobu Mita <akinobu.mita(a)gmail.com> Signed-off-by: Dmitry Torokhov <dmitry.torokhov(a)gmail.com> Signed-off-by: Sasha Levin <alexander.levin(a)verizon.com> Signed-off-by: Greg Kroah-Hartman <gregkh(a)linuxfoundation.org> --- drivers/input/keyboard/mpr121_touchkey.c | 23 ++++++++++++++--------- 1 file changed, 14 insertions(+), 9 deletions(-) --- a/drivers/input/keyboard/mpr121_touchkey.c +++ b/drivers/input/keyboard/mpr121_touchkey.c @@ -87,7 +87,8 @@ static irqreturn_t mpr_touchkey_interrup struct mpr121_touchkey *mpr121 = dev_id; struct i2c_client *client = mpr121->client; struct input_dev *input = mpr121->input_dev; - unsigned int key_num, key_val, pressed; + unsigned long bit_changed; + unsigned int key_num; int reg; reg = i2c_smbus_read_byte_data(client, ELE_TOUCH_STATUS_1_ADDR); @@ -105,18 +106,22 @@ static irqreturn_t mpr_touchkey_interrup reg &= TOUCH_STATUS_MASK; /* use old press bit to figure out which bit changed */ - key_num = ffs(reg ^ mpr121->statusbits) - 1; - pressed = reg & (1 << key_num); + bit_changed = reg ^ mpr121->statusbits; mpr121->statusbits = reg; + for_each_set_bit(key_num, &bit_changed, mpr121->keycount) { + unsigned int key_val, pressed; - key_val = mpr121->keycodes[key_num]; + pressed = reg & BIT(key_num); + key_val = mpr121->keycodes[key_num]; - input_event(input, EV_MSC, MSC_SCAN, key_num); - input_report_key(input, key_val, pressed); - input_sync(input); + input_event(input, EV_MSC, MSC_SCAN, key_num); + input_report_key(input, key_val, pressed); + + dev_dbg(&client->dev, "key %d %d %s\n", key_num, key_val, + pressed ? "pressed" : "released"); - dev_dbg(&client->dev, "key %d %d %s\n", key_num, key_val, - pressed ? "pressed" : "released"); + } + input_sync(input); out: return IRQ_HANDLED; Patches currently in stable-queue which might be from akinobu.mita(a)gmail.com are queue-4.4/input-mpr121-set-missing-event-capability.patch queue-4.4/input-mpr121-handle-multiple-bits-change-of-status-register.patch

7 years, 9 months

1
0
0 0

[Linux-stable-mirror] Patch "iommu/arm-smmu-v3: Clear prior settings when updating STEs" has been added to the 4.4-stable tree

by gregkh＠linuxfoundation.org

This is a note to let you know that I've just added the patch titled iommu/arm-smmu-v3: Clear prior settings when updating STEs to the 4.4-stable tree which can be found at: http://www.kernel.org/git/?p=linux/kernel/git/stable/stable-queue.git;a=sum… The filename of the patch is: iommu-arm-smmu-v3-clear-prior-settings-when-updating-stes.patch and it can be found in the queue-4.4 subdirectory. If you, or anyone else, feels it should not be added to the stable tree, please let <stable(a)vger.kernel.org> know about it. >From foo@baz Thu Nov 9 18:22:51 CET 2017 From: Nate Watterson <nwatters(a)codeaurora.org> Date: Tue, 20 Dec 2016 23:11:48 -0500 Subject: iommu/arm-smmu-v3: Clear prior settings when updating STEs From: Nate Watterson <nwatters(a)codeaurora.org> [ Upstream commit 810871c57011eb3e89e6768932757f169d666cd2 ] To prevent corruption of the stage-1 context pointer field when updating STEs, rebuild the entire containing dword instead of clearing individual fields. Signed-off-by: Nate Watterson <nwatters(a)codeaurora.org> Signed-off-by: Will Deacon <will.deacon(a)arm.com> Signed-off-by: Sasha Levin <alexander.levin(a)verizon.com> Signed-off-by: Greg Kroah-Hartman <gregkh(a)linuxfoundation.org> --- drivers/iommu/arm-smmu-v3.c | 10 ++-------- 1 file changed, 2 insertions(+), 8 deletions(-) --- a/drivers/iommu/arm-smmu-v3.c +++ b/drivers/iommu/arm-smmu-v3.c @@ -1033,13 +1033,8 @@ static void arm_smmu_write_strtab_ent(st } } - /* Nuke the existing Config, as we're going to rewrite it */ - val &= ~(STRTAB_STE_0_CFG_MASK << STRTAB_STE_0_CFG_SHIFT); - - if (ste->valid) - val |= STRTAB_STE_0_V; - else - val &= ~STRTAB_STE_0_V; + /* Nuke the existing STE_0 value, as we're going to rewrite it */ + val = ste->valid ? STRTAB_STE_0_V : 0; if (ste->bypass) { val |= disable_bypass ? STRTAB_STE_0_CFG_ABORT @@ -1068,7 +1063,6 @@ static void arm_smmu_write_strtab_ent(st val |= (ste->s1_cfg->cdptr_dma & STRTAB_STE_0_S1CTXPTR_MASK << STRTAB_STE_0_S1CTXPTR_SHIFT) | STRTAB_STE_0_CFG_S1_TRANS; - } if (ste->s2_cfg) { Patches currently in stable-queue which might be from nwatters(a)codeaurora.org are queue-4.4/iommu-arm-smmu-v3-clear-prior-settings-when-updating-stes.patch

7 years, 9 months

1
0
0 0

[Linux-stable-mirror] Patch "Input: mpr121 - set missing event capability" has been added to the 4.4-stable tree

by gregkh＠linuxfoundation.org

This is a note to let you know that I've just added the patch titled Input: mpr121 - set missing event capability to the 4.4-stable tree which can be found at: http://www.kernel.org/git/?p=linux/kernel/git/stable/stable-queue.git;a=sum… The filename of the patch is: input-mpr121-set-missing-event-capability.patch and it can be found in the queue-4.4 subdirectory. If you, or anyone else, feels it should not be added to the stable tree, please let <stable(a)vger.kernel.org> know about it. >From foo@baz Thu Nov 9 18:22:51 CET 2017 From: Akinobu Mita <akinobu.mita(a)gmail.com> Date: Sun, 15 Jan 2017 14:44:05 -0800 Subject: Input: mpr121 - set missing event capability From: Akinobu Mita <akinobu.mita(a)gmail.com> [ Upstream commit 9723ddc8fe0d76ce41fe0dc16afb241ec7d0a29d ] This driver reports misc scan input events on the sensor's status register changes. But the event capability for them was not set in the device initialization, so these events were ignored. This change adds the missing event capability. Signed-off-by: Akinobu Mita <akinobu.mita(a)gmail.com> Signed-off-by: Dmitry Torokhov <dmitry.torokhov(a)gmail.com> Signed-off-by: Sasha Levin <alexander.levin(a)verizon.com> Signed-off-by: Greg Kroah-Hartman <gregkh(a)linuxfoundation.org> --- drivers/input/keyboard/mpr121_touchkey.c | 1 + 1 file changed, 1 insertion(+) --- a/drivers/input/keyboard/mpr121_touchkey.c +++ b/drivers/input/keyboard/mpr121_touchkey.c @@ -236,6 +236,7 @@ static int mpr_touchkey_probe(struct i2c input_dev->id.bustype = BUS_I2C; input_dev->dev.parent = &client->dev; input_dev->evbit[0] = BIT_MASK(EV_KEY) | BIT_MASK(EV_REP); + input_set_capability(input_dev, EV_MSC, MSC_SCAN); input_dev->keycode = mpr121->keycodes; input_dev->keycodesize = sizeof(mpr121->keycodes[0]); Patches currently in stable-queue which might be from akinobu.mita(a)gmail.com are queue-4.4/input-mpr121-set-missing-event-capability.patch queue-4.4/input-mpr121-handle-multiple-bits-change-of-status-register.patch

7 years, 9 months

1
0
0 0

[Linux-stable-mirror] Patch "iio: trigger: free trigger resource correctly" has been added to the 4.4-stable tree

by gregkh＠linuxfoundation.org

This is a note to let you know that I've just added the patch titled iio: trigger: free trigger resource correctly to the 4.4-stable tree which can be found at: http://www.kernel.org/git/?p=linux/kernel/git/stable/stable-queue.git;a=sum… The filename of the patch is: iio-trigger-free-trigger-resource-correctly.patch and it can be found in the queue-4.4 subdirectory. If you, or anyone else, feels it should not be added to the stable tree, please let <stable(a)vger.kernel.org> know about it. >From foo@baz Thu Nov 9 18:22:51 CET 2017 From: Alison Schofield <amsfield22(a)gmail.com> Date: Thu, 19 Jan 2017 19:47:38 -0800 Subject: iio: trigger: free trigger resource correctly From: Alison Schofield <amsfield22(a)gmail.com> [ Upstream commit 10e840dfb0b7fc345082dd9e5fff3c1c02e7690e ] These stand-alone trigger drivers were using iio_trigger_put() where they should have been using iio_trigger_free(). The iio_trigger_put() adds a module_put which is bad since they never did a module_get. In the sysfs driver, module_get/put's are used as triggers are added & removed. This extra module_put() occurs on an error path in the probe routine (probably rare). In the bfin-timer & interrupt trigger drivers, the module resources are not explicitly managed, so it's doing a put on something that was never get'd. It occurs on the probe error path and on the remove path (not so rare). Tested with the sysfs trigger driver. The bfin & interrupt drivers were build tested & inspected only. Signed-off-by: Alison Schofield <amsfield22(a)gmail.com> Signed-off-by: Jonathan Cameron <jic23(a)kernel.org> Signed-off-by: Sasha Levin <alexander.levin(a)verizon.com> Signed-off-by: Greg Kroah-Hartman <gregkh(a)linuxfoundation.org> --- drivers/iio/trigger/iio-trig-interrupt.c | 8 ++++---- drivers/iio/trigger/iio-trig-sysfs.c | 2 +- drivers/staging/iio/trigger/iio-trig-bfin-timer.c | 4 ++-- 3 files changed, 7 insertions(+), 7 deletions(-) --- a/drivers/iio/trigger/iio-trig-interrupt.c +++ b/drivers/iio/trigger/iio-trig-interrupt.c @@ -58,7 +58,7 @@ static int iio_interrupt_trigger_probe(s trig_info = kzalloc(sizeof(*trig_info), GFP_KERNEL); if (!trig_info) { ret = -ENOMEM; - goto error_put_trigger; + goto error_free_trigger; } iio_trigger_set_drvdata(trig, trig_info); trig_info->irq = irq; @@ -83,8 +83,8 @@ error_release_irq: free_irq(irq, trig); error_free_trig_info: kfree(trig_info); -error_put_trigger: - iio_trigger_put(trig); +error_free_trigger: + iio_trigger_free(trig); error_ret: return ret; } @@ -99,7 +99,7 @@ static int iio_interrupt_trigger_remove( iio_trigger_unregister(trig); free_irq(trig_info->irq, trig); kfree(trig_info); - iio_trigger_put(trig); + iio_trigger_free(trig); return 0; } --- a/drivers/iio/trigger/iio-trig-sysfs.c +++ b/drivers/iio/trigger/iio-trig-sysfs.c @@ -174,7 +174,7 @@ static int iio_sysfs_trigger_probe(int i return 0; out2: - iio_trigger_put(t->trig); + iio_trigger_free(t->trig); free_t: kfree(t); out1: --- a/drivers/staging/iio/trigger/iio-trig-bfin-timer.c +++ b/drivers/staging/iio/trigger/iio-trig-bfin-timer.c @@ -259,7 +259,7 @@ out_free_irq: out1: iio_trigger_unregister(st->trig); out: - iio_trigger_put(st->trig); + iio_trigger_free(st->trig); return ret; } @@ -272,7 +272,7 @@ static int iio_bfin_tmr_trigger_remove(s peripheral_free(st->t->pin); free_irq(st->irq, st); iio_trigger_unregister(st->trig); - iio_trigger_put(st->trig); + iio_trigger_free(st->trig); return 0; } Patches currently in stable-queue which might be from amsfield22(a)gmail.com are queue-4.4/iio-trigger-free-trigger-resource-correctly.patch

7 years, 9 months

1
0
0 0

[Linux-stable-mirror] Patch "IB/ipoib: Change list_del to list_del_init in the tx object" has been added to the 4.4-stable tree

by gregkh＠linuxfoundation.org

This is a note to let you know that I've just added the patch titled IB/ipoib: Change list_del to list_del_init in the tx object to the 4.4-stable tree which can be found at: http://www.kernel.org/git/?p=linux/kernel/git/stable/stable-queue.git;a=sum… The filename of the patch is: ib-ipoib-change-list_del-to-list_del_init-in-the-tx-object.patch and it can be found in the queue-4.4 subdirectory. If you, or anyone else, feels it should not be added to the stable tree, please let <stable(a)vger.kernel.org> know about it. >From foo@baz Thu Nov 9 18:22:51 CET 2017 From: Feras Daoud <ferasda(a)mellanox.com> Date: Wed, 28 Dec 2016 14:47:28 +0200 Subject: IB/ipoib: Change list_del to list_del_init in the tx object From: Feras Daoud <ferasda(a)mellanox.com> [ Upstream commit 27d41d29c7f093f6f77843624fbb080c1b4a8b9c ] Since ipoib_cm_tx_start function and ipoib_cm_tx_reap function belong to different work queues, they can run in parallel. In this case if ipoib_cm_tx_reap calls list_del and release the lock, ipoib_cm_tx_start may acquire it and call list_del_init on the already deleted object. Changing list_del to list_del_init in ipoib_cm_tx_reap fixes the problem. Fixes: 839fcaba355a ("IPoIB: Connected mode experimental support") Signed-off-by: Feras Daoud <ferasda(a)mellanox.com> Signed-off-by: Erez Shitrit <erezsh(a)mellanox.com> Reviewed-by: Alex Vesker <valex(a)mellanox.com> Signed-off-by: Leon Romanovsky <leon(a)kernel.org> Reviewed-by: Yuval Shaia <yuval.shaia(a)oracle.com> Signed-off-by: Doug Ledford <dledford(a)redhat.com> Signed-off-by: Sasha Levin <alexander.levin(a)verizon.com> Signed-off-by: Greg Kroah-Hartman <gregkh(a)linuxfoundation.org> --- drivers/infiniband/ulp/ipoib/ipoib_cm.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) --- a/drivers/infiniband/ulp/ipoib/ipoib_cm.c +++ b/drivers/infiniband/ulp/ipoib/ipoib_cm.c @@ -1373,7 +1373,7 @@ static void ipoib_cm_tx_reap(struct work while (!list_empty(&priv->cm.reap_list)) { p = list_entry(priv->cm.reap_list.next, typeof(*p), list); - list_del(&p->list); + list_del_init(&p->list); spin_unlock_irqrestore(&priv->lock, flags); netif_tx_unlock_bh(dev); ipoib_cm_tx_destroy(p); Patches currently in stable-queue which might be from ferasda(a)mellanox.com are queue-4.4/ib-ipoib-change-list_del-to-list_del_init-in-the-tx-object.patch

7 years, 9 months

1
0
0 0

[Linux-stable-mirror] Patch "dt-bindings: clockgen: Add compatible string for LS1012A" has been added to the 4.4-stable tree

by gregkh＠linuxfoundation.org

This is a note to let you know that I've just added the patch titled dt-bindings: clockgen: Add compatible string for LS1012A to the 4.4-stable tree which can be found at: http://www.kernel.org/git/?p=linux/kernel/git/stable/stable-queue.git;a=sum… The filename of the patch is: dt-bindings-clockgen-add-compatible-string-for-ls1012a.patch and it can be found in the queue-4.4 subdirectory. If you, or anyone else, feels it should not be added to the stable tree, please let <stable(a)vger.kernel.org> know about it. >From foo@baz Thu Nov 9 18:22:51 CET 2017 From: Harninder Rai <harninder.rai(a)nxp.com> Date: Wed, 9 Nov 2016 23:40:53 +0530 Subject: dt-bindings: clockgen: Add compatible string for LS1012A From: Harninder Rai <harninder.rai(a)nxp.com> [ Upstream commit 73447f68d7b2bc1df870da88b0e21d2bc1afc025 ] Signed-off-by: Harninder Rai <harninder.rai(a)nxp.com> Signed-off-by: Bhaskar Upadhaya <Bhaskar.Upadhaya(a)nxp.com> Acked-by: Rob Herring <robh(a)kernel.org> Signed-off-by: Shawn Guo <shawnguo(a)kernel.org> Signed-off-by: Sasha Levin <alexander.levin(a)verizon.com> Signed-off-by: Greg Kroah-Hartman <gregkh(a)linuxfoundation.org> --- Documentation/devicetree/bindings/clock/qoriq-clock.txt | 1 + 1 file changed, 1 insertion(+) --- a/Documentation/devicetree/bindings/clock/qoriq-clock.txt +++ b/Documentation/devicetree/bindings/clock/qoriq-clock.txt @@ -31,6 +31,7 @@ Required properties: * "fsl,t4240-clockgen" * "fsl,b4420-clockgen" * "fsl,b4860-clockgen" + * "fsl,ls1012a-clockgen" * "fsl,ls1021a-clockgen" Chassis-version clock strings include: * "fsl,qoriq-clockgen-1.0": for chassis 1.0 clocks Patches currently in stable-queue which might be from harninder.rai(a)nxp.com are queue-4.4/dt-bindings-clockgen-add-compatible-string-for-ls1012a.patch

7 years, 9 months

1
0
0 0

[Linux-stable-mirror] Patch "dt-bindings: Add LEGO MINDSTORMS EV3 compatible specification" has been added to the 4.4-stable tree

by gregkh＠linuxfoundation.org

This is a note to let you know that I've just added the patch titled dt-bindings: Add LEGO MINDSTORMS EV3 compatible specification to the 4.4-stable tree which can be found at: http://www.kernel.org/git/?p=linux/kernel/git/stable/stable-queue.git;a=sum… The filename of the patch is: dt-bindings-add-lego-mindstorms-ev3-compatible-specification.patch and it can be found in the queue-4.4 subdirectory. If you, or anyone else, feels it should not be added to the stable tree, please let <stable(a)vger.kernel.org> know about it. >From foo@baz Thu Nov 9 18:22:51 CET 2017 From: David Lechner <david(a)lechnology.com> Date: Fri, 13 Jan 2017 13:03:40 -0600 Subject: dt-bindings: Add LEGO MINDSTORMS EV3 compatible specification From: David Lechner <david(a)lechnology.com> [ Upstream commit 21078ab174c99885ca83a5c32db0d33b1617745e ] This adds the board level device tree specification for LEGO MINDSTORMS EV3 Acked-by: Rob Herring <robh(a)kernel.org> Signed-off-by: David Lechner <david(a)lechnology.com> Signed-off-by: Sekhar Nori <nsekhar(a)ti.com> Signed-off-by: Sasha Levin <alexander.levin(a)verizon.com> Signed-off-by: Greg Kroah-Hartman <gregkh(a)linuxfoundation.org> --- Documentation/devicetree/bindings/arm/davinci.txt | 4 ++++ 1 file changed, 4 insertions(+) --- a/Documentation/devicetree/bindings/arm/davinci.txt +++ b/Documentation/devicetree/bindings/arm/davinci.txt @@ -9,6 +9,10 @@ EnBW AM1808 based CMC board Required root node properties: - compatible = "enbw,cmc", "ti,da850; +LEGO MINDSTORMS EV3 (AM1808 based) +Required root node properties: + - compatible = "lego,ev3", "ti,da850"; + Generic DaVinci Boards ---------------------- Patches currently in stable-queue which might be from david(a)lechnology.com are queue-4.4/dt-bindings-add-lego-mindstorms-ev3-compatible-specification.patch queue-4.4/dt-bindings-add-vendor-prefix-for-lego.patch

7 years, 9 months

1
0
0 0

[Linux-stable-mirror] Patch "dt-bindings: Add vendor prefix for LEGO" has been added to the 4.4-stable tree

by gregkh＠linuxfoundation.org

This is a note to let you know that I've just added the patch titled dt-bindings: Add vendor prefix for LEGO to the 4.4-stable tree which can be found at: http://www.kernel.org/git/?p=linux/kernel/git/stable/stable-queue.git;a=sum… The filename of the patch is: dt-bindings-add-vendor-prefix-for-lego.patch and it can be found in the queue-4.4 subdirectory. If you, or anyone else, feels it should not be added to the stable tree, please let <stable(a)vger.kernel.org> know about it. >From foo@baz Thu Nov 9 18:22:51 CET 2017 From: David Lechner <david(a)lechnology.com> Date: Fri, 13 Jan 2017 13:03:39 -0600 Subject: dt-bindings: Add vendor prefix for LEGO From: David Lechner <david(a)lechnology.com> [ Upstream commit 7dcc31e2e68a386a29070384b51683ece80982bf ] Add a vendor prefix for LEGO Systems A/S Acked-by: Rob Herring <robh(a)kernel.org> Signed-off-by: David Lechner <david(a)lechnology.com> Signed-off-by: Sekhar Nori <nsekhar(a)ti.com> Signed-off-by: Sasha Levin <alexander.levin(a)verizon.com> Signed-off-by: Greg Kroah-Hartman <gregkh(a)linuxfoundation.org> --- Documentation/devicetree/bindings/vendor-prefixes.txt | 1 + 1 file changed, 1 insertion(+) --- a/Documentation/devicetree/bindings/vendor-prefixes.txt +++ b/Documentation/devicetree/bindings/vendor-prefixes.txt @@ -126,6 +126,7 @@ keymile Keymile GmbH kinetic Kinetic Technologies lacie LaCie lantiq Lantiq Semiconductor +lego LEGO Systems A/S lenovo Lenovo Group Ltd. lg LG Corporation linux Linux-specific binding Patches currently in stable-queue which might be from david(a)lechnology.com are queue-4.4/dt-bindings-add-lego-mindstorms-ev3-compatible-specification.patch queue-4.4/dt-bindings-add-vendor-prefix-for-lego.patch

7 years, 9 months

1
0
0 0

[Linux-stable-mirror] Patch "drm: drm_minor_register(): Clean up debugfs on failure" has been added to the 4.4-stable tree

by gregkh＠linuxfoundation.org

This is a note to let you know that I've just added the patch titled drm: drm_minor_register(): Clean up debugfs on failure to the 4.4-stable tree which can be found at: http://www.kernel.org/git/?p=linux/kernel/git/stable/stable-queue.git;a=sum… The filename of the patch is: drm-drm_minor_register-clean-up-debugfs-on-failure.patch and it can be found in the queue-4.4 subdirectory. If you, or anyone else, feels it should not be added to the stable tree, please let <stable(a)vger.kernel.org> know about it. >From foo@baz Thu Nov 9 18:22:51 CET 2017 From: Noralf Trønnes <noralf(a)tronnes.org> Date: Thu, 26 Jan 2017 23:56:04 +0100 Subject: drm: drm_minor_register(): Clean up debugfs on failure From: Noralf Trønnes <noralf(a)tronnes.org> [ Upstream commit a67834f8bfa1e2f48bb27d07b9a552ba7c3af82a ] Call drm_debugfs_cleanup() in case drm_debugfs_init() fails to cover for failure in the drm_driver.debugfs_init callback. Signed-off-by: Noralf TrÃ¸nnes <noralf(a)tronnes.org> Signed-off-by: Daniel Vetter <daniel.vetter(a)ffwll.ch> Link: http://patchwork.freedesktop.org/patch/msgid/20170126225621.12314-3-noralf@… Signed-off-by: Sasha Levin <alexander.levin(a)verizon.com> Signed-off-by: Greg Kroah-Hartman <gregkh(a)linuxfoundation.org> --- drivers/gpu/drm/drm_drv.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) --- a/drivers/gpu/drm/drm_drv.c +++ b/drivers/gpu/drm/drm_drv.c @@ -312,7 +312,7 @@ static int drm_minor_register(struct drm ret = drm_debugfs_init(minor, minor->index, drm_debugfs_root); if (ret) { DRM_ERROR("DRM: Failed to initialize /sys/kernel/debug/dri.\n"); - return ret; + goto err_debugfs; } ret = device_add(minor->kdev); Patches currently in stable-queue which might be from noralf(a)tronnes.org are queue-4.4/drm-drm_minor_register-clean-up-debugfs-on-failure.patch

7 years, 9 months

1
0
0 0

[Linux-stable-mirror] Patch "ARM: omap2plus_defconfig: Fix probe errors on UARTs 5 and 6" has been added to the 4.4-stable tree

by gregkh＠linuxfoundation.org

This is a note to let you know that I've just added the patch titled ARM: omap2plus_defconfig: Fix probe errors on UARTs 5 and 6 to the 4.4-stable tree which can be found at: http://www.kernel.org/git/?p=linux/kernel/git/stable/stable-queue.git;a=sum… The filename of the patch is: arm-omap2plus_defconfig-fix-probe-errors-on-uarts-5-and-6.patch and it can be found in the queue-4.4 subdirectory. If you, or anyone else, feels it should not be added to the stable tree, please let <stable(a)vger.kernel.org> know about it. >From foo@baz Thu Nov 9 18:22:51 CET 2017 From: Tony Lindgren <tony(a)atomide.com> Date: Fri, 20 Jan 2017 12:13:19 -0800 Subject: ARM: omap2plus_defconfig: Fix probe errors on UARTs 5 and 6 From: Tony Lindgren <tony(a)atomide.com> [ Upstream commit 4cd6a59f5c1a9b0cca0da09fbba42b9450ffc899 ] We have more than four uarts on some SoCs and that can cause noise with errors while booting. Signed-off-by: Tony Lindgren <tony(a)atomide.com> Signed-off-by: Sasha Levin <alexander.levin(a)verizon.com> Signed-off-by: Greg Kroah-Hartman <gregkh(a)linuxfoundation.org> --- arch/arm/configs/omap2plus_defconfig | 1 + 1 file changed, 1 insertion(+) --- a/arch/arm/configs/omap2plus_defconfig +++ b/arch/arm/configs/omap2plus_defconfig @@ -221,6 +221,7 @@ CONFIG_SERIO=m CONFIG_SERIAL_8250=y CONFIG_SERIAL_8250_CONSOLE=y CONFIG_SERIAL_8250_NR_UARTS=32 +CONFIG_SERIAL_8250_RUNTIME_UARTS=6 CONFIG_SERIAL_8250_EXTENDED=y CONFIG_SERIAL_8250_MANY_PORTS=y CONFIG_SERIAL_8250_SHARE_IRQ=y Patches currently in stable-queue which might be from tony(a)atomide.com are queue-4.4/arm-omap2plus_defconfig-fix-probe-errors-on-uarts-5-and-6.patch

7 years, 9 months

1
0
0 0

[Linux-stable-mirror] Patch "crypto: vmx - disable preemption to enable vsx in aes_ctr.c" has been added to the 4.4-stable tree

by gregkh＠linuxfoundation.org

This is a note to let you know that I've just added the patch titled crypto: vmx - disable preemption to enable vsx in aes_ctr.c to the 4.4-stable tree which can be found at: http://www.kernel.org/git/?p=linux/kernel/git/stable/stable-queue.git;a=sum… The filename of the patch is: crypto-vmx-disable-preemption-to-enable-vsx-in-aes_ctr.c.patch and it can be found in the queue-4.4 subdirectory. If you, or anyone else, feels it should not be added to the stable tree, please let <stable(a)vger.kernel.org> know about it. >From foo@baz Thu Nov 9 18:22:51 CET 2017 From: Li Zhong <zhong(a)linux.vnet.ibm.com> Date: Fri, 20 Jan 2017 16:35:33 +0800 Subject: crypto: vmx - disable preemption to enable vsx in aes_ctr.c From: Li Zhong <zhong(a)linux.vnet.ibm.com> [ Upstream commit 7dede913fc2ab9c0d3bff3a49e26fa9e858b0c13 ] Some preemptible check warnings were reported from enable_kernel_vsx(). This patch disables preemption in aes_ctr.c before enabling vsx, and they are now consistent with other files in the same directory. Signed-off-by: Li Zhong <zhong(a)linux.vnet.ibm.com> Signed-off-by: Herbert Xu <herbert(a)gondor.apana.org.au> Signed-off-by: Sasha Levin <alexander.levin(a)verizon.com> Signed-off-by: Greg Kroah-Hartman <gregkh(a)linuxfoundation.org> --- drivers/crypto/vmx/aes_ctr.c | 6 ++++++ 1 file changed, 6 insertions(+) --- a/drivers/crypto/vmx/aes_ctr.c +++ b/drivers/crypto/vmx/aes_ctr.c @@ -80,11 +80,13 @@ static int p8_aes_ctr_setkey(struct cryp int ret; struct p8_aes_ctr_ctx *ctx = crypto_tfm_ctx(tfm); + preempt_disable(); pagefault_disable(); enable_kernel_altivec(); enable_kernel_vsx(); ret = aes_p8_set_encrypt_key(key, keylen * 8, &ctx->enc_key); pagefault_enable(); + preempt_enable(); ret += crypto_blkcipher_setkey(ctx->fallback, key, keylen); return ret; @@ -99,11 +101,13 @@ static void p8_aes_ctr_final(struct p8_a u8 *dst = walk->dst.virt.addr; unsigned int nbytes = walk->nbytes; + preempt_disable(); pagefault_disable(); enable_kernel_altivec(); enable_kernel_vsx(); aes_p8_encrypt(ctrblk, keystream, &ctx->enc_key); pagefault_enable(); + preempt_enable(); crypto_xor(keystream, src, nbytes); memcpy(dst, keystream, nbytes); @@ -132,6 +136,7 @@ static int p8_aes_ctr_crypt(struct blkci blkcipher_walk_init(&walk, dst, src, nbytes); ret = blkcipher_walk_virt_block(desc, &walk, AES_BLOCK_SIZE); while ((nbytes = walk.nbytes) >= AES_BLOCK_SIZE) { + preempt_disable(); pagefault_disable(); enable_kernel_altivec(); enable_kernel_vsx(); @@ -143,6 +148,7 @@ static int p8_aes_ctr_crypt(struct blkci &ctx->enc_key, walk.iv); pagefault_enable(); + preempt_enable(); /* We need to update IV mostly for last bytes/round */ inc = (nbytes & AES_BLOCK_MASK) / AES_BLOCK_SIZE; Patches currently in stable-queue which might be from zhong(a)linux.vnet.ibm.com are queue-4.4/crypto-vmx-disable-preemption-to-enable-vsx-in-aes_ctr.c.patch queue-4.4/kvm-ppc-book-3s-xics-correct-the-real-mode-icp-rejecting-counter.patch

7 years, 9 months

1
0
0 0

[Linux-stable-mirror] Patch "ARM: dts: imx53-qsb-common: fix FEC pinmux config" has been added to the 4.4-stable tree

by gregkh＠linuxfoundation.org

This is a note to let you know that I've just added the patch titled ARM: dts: imx53-qsb-common: fix FEC pinmux config to the 4.4-stable tree which can be found at: http://www.kernel.org/git/?p=linux/kernel/git/stable/stable-queue.git;a=sum… The filename of the patch is: arm-dts-imx53-qsb-common-fix-fec-pinmux-config.patch and it can be found in the queue-4.4 subdirectory. If you, or anyone else, feels it should not be added to the stable tree, please let <stable(a)vger.kernel.org> know about it. >From foo@baz Thu Nov 9 18:22:51 CET 2017 From: Patrick Bruenn <p.bruenn(a)beckhoff.com> Date: Wed, 25 Jan 2017 06:25:48 +0100 Subject: ARM: dts: imx53-qsb-common: fix FEC pinmux config From: Patrick Bruenn <p.bruenn(a)beckhoff.com> [ Upstream commit 8b649e426336d7d4800ff9c82858328f4215ba01 ] The pinmux configuration in device tree was different from manual muxing in <u-boot>/board/freescale/mx53loco/mx53loco.c All pins were configured as NO_PAD_CTL(1 << 31), which was fine as the bootloader already did the correct pinmuxing for us. But recently u-boot is migrating to reuse device tree files from the kernel tree, so it seems to be better to have the correct pinmuxing in our files, too. Signed-off-by: Patrick Bruenn <p.bruenn(a)beckhoff.com> Signed-off-by: Shawn Guo <shawnguo(a)kernel.org> Signed-off-by: Sasha Levin <alexander.levin(a)verizon.com> Signed-off-by: Greg Kroah-Hartman <gregkh(a)linuxfoundation.org> --- arch/arm/boot/dts/imx53-qsb-common.dtsi | 20 ++++++++++---------- 1 file changed, 10 insertions(+), 10 deletions(-) --- a/arch/arm/boot/dts/imx53-qsb-common.dtsi +++ b/arch/arm/boot/dts/imx53-qsb-common.dtsi @@ -215,16 +215,16 @@ pinctrl_fec: fecgrp { fsl,pins = < - MX53_PAD_FEC_MDC__FEC_MDC 0x80000000 - MX53_PAD_FEC_MDIO__FEC_MDIO 0x80000000 - MX53_PAD_FEC_REF_CLK__FEC_TX_CLK 0x80000000 - MX53_PAD_FEC_RX_ER__FEC_RX_ER 0x80000000 - MX53_PAD_FEC_CRS_DV__FEC_RX_DV 0x80000000 - MX53_PAD_FEC_RXD1__FEC_RDATA_1 0x80000000 - MX53_PAD_FEC_RXD0__FEC_RDATA_0 0x80000000 - MX53_PAD_FEC_TX_EN__FEC_TX_EN 0x80000000 - MX53_PAD_FEC_TXD1__FEC_TDATA_1 0x80000000 - MX53_PAD_FEC_TXD0__FEC_TDATA_0 0x80000000 + MX53_PAD_FEC_MDC__FEC_MDC 0x4 + MX53_PAD_FEC_MDIO__FEC_MDIO 0x1fc + MX53_PAD_FEC_REF_CLK__FEC_TX_CLK 0x180 + MX53_PAD_FEC_RX_ER__FEC_RX_ER 0x180 + MX53_PAD_FEC_CRS_DV__FEC_RX_DV 0x180 + MX53_PAD_FEC_RXD1__FEC_RDATA_1 0x180 + MX53_PAD_FEC_RXD0__FEC_RDATA_0 0x180 + MX53_PAD_FEC_TX_EN__FEC_TX_EN 0x4 + MX53_PAD_FEC_TXD1__FEC_TDATA_1 0x4 + MX53_PAD_FEC_TXD0__FEC_TDATA_0 0x4 >; }; Patches currently in stable-queue which might be from p.bruenn(a)beckhoff.com are queue-4.4/arm-dts-imx53-qsb-common-fix-fec-pinmux-config.patch

7 years, 9 months

1
0
0 0

[Linux-stable-mirror] Patch "[media] adv7604: Initialize drive strength to default when using DT" has been added to the 4.4-stable tree

by gregkh＠linuxfoundation.org

This is a note to let you know that I've just added the patch titled [media] adv7604: Initialize drive strength to default when using DT to the 4.4-stable tree which can be found at: http://www.kernel.org/git/?p=linux/kernel/git/stable/stable-queue.git;a=sum… The filename of the patch is: adv7604-initialize-drive-strength-to-default-when-using-dt.patch and it can be found in the queue-4.4 subdirectory. If you, or anyone else, feels it should not be added to the stable tree, please let <stable(a)vger.kernel.org> know about it. >From foo@baz Thu Nov 9 18:22:51 CET 2017 From: Lars-Peter Clausen <lars(a)metafoo.de> Date: Tue, 29 Nov 2016 09:23:48 -0200 Subject: [media] adv7604: Initialize drive strength to default when using DT From: Lars-Peter Clausen <lars(a)metafoo.de> [ Upstream commit da8892d410db224d9a24104529794e6e37e0c100 ] The adv7604 driver platform data contains fields for configuring the drive strength of the output pins. When probing the driver through DT these fields are not explicitly initialized, which means they are left at 0. This is a reserved setting for the drive strength configuration though and can cause signal integrity issues. Whether these signal integrity issues are visible depends on the PCB specifics (e.g. the higher the load capacitance for the output the more visible the issue). But it has been observed on existing solutions at high pixel clock rates. Initialize the drive strength settings to the power-on-reset value of the device when probing through devicetree to avoid this issue. Fixes: 0e158be0162b ("adv7604: Add DT support") Signed-off-by: Lars-Peter Clausen <lars(a)metafoo.de> Reviewed-by: Laurent Pinchart <laurent.pinchart(a)ideasonboard.com> Tested-by: Niklas Söderlund <niklas.soderlund+renesas(a)ragnatech.se> Signed-off-by: Hans Verkuil <hans.verkuil(a)cisco.com> Signed-off-by: Mauro Carvalho Chehab <mchehab(a)s-opensource.com> Signed-off-by: Sasha Levin <alexander.levin(a)verizon.com> Signed-off-by: Greg Kroah-Hartman <gregkh(a)linuxfoundation.org> --- drivers/media/i2c/adv7604.c | 3 +++ 1 file changed, 3 insertions(+) --- a/drivers/media/i2c/adv7604.c +++ b/drivers/media/i2c/adv7604.c @@ -2856,6 +2856,9 @@ static int adv76xx_parse_dt(struct adv76 state->pdata.alt_data_sat = 1; state->pdata.op_format_mode_sel = ADV7604_OP_FORMAT_MODE0; state->pdata.bus_order = ADV7604_BUS_ORDER_RGB; + state->pdata.dr_str_data = ADV76XX_DR_STR_MEDIUM_HIGH; + state->pdata.dr_str_clk = ADV76XX_DR_STR_MEDIUM_HIGH; + state->pdata.dr_str_sync = ADV76XX_DR_STR_MEDIUM_HIGH; return 0; } Patches currently in stable-queue which might be from lars(a)metafoo.de are queue-4.4/adv7604-initialize-drive-strength-to-default-when-using-dt.patch

7 years, 9 months

1
0
0 0

[Linux-stable-mirror] [GIT PULL] commits for Linux 3.18

by Levin, Alexander (Sasha Levin)

-----BEGIN PGP SIGNED MESSAGE----- Hash: SHA256 Hi Greg, Pleae pull commits for Linux 3.18 . I've sent a review request for all commits over a week ago and all comments were addressed. Thanks, Sasha ===== The following changes since commit 943dc0b3ef9f0168494d6dca305cd0cf53a0b3d4: Linux 3.18.80 (2017-11-08 10:03:50 +0100) are available in the git repository at: git://git.kernel.org/pub/scm/linux/kernel/git/sashal/linux-stable.git for-greg-3.18-2 for you to fetch changes up to dc9288cdd7a681a1eeaa03054be6a098925f06db: IB/ipoib: Change list_del to list_del_init in the tx object (2017-11-08 15:41:33 -0500) - ---------------------------------------------------------------- Akinobu Mita (2): Input: mpr121 - handle multiple bits change of status register Input: mpr121 - set missing event capability Alison Schofield (1): iio: trigger: free trigger resource correctly David Lechner (2): dt-bindings: Add LEGO MINDSTORMS EV3 compatible specification dt-bindings: Add vendor prefix for LEGO Feras Daoud (1): IB/ipoib: Change list_del to list_del_init in the tx object Gilad Ben-Yossef (1): IPsec: do not ignore crypto err in ah4 input Juergen Gross (1): xen/netback: set default upper limit of tx/rx queues to 8 Laurent Pinchart (1): serial: sh-sci: Fix register offsets for the IRDA serial port Maciej W. Rozycki (1): video: fbdev: pmag-ba-fb: Remove bad `__init' annotation Noralf TrÃ¸nnes (1): drm: drm_minor_register(): Clean up debugfs on failure Patrick Bruenn (1): ARM: dts: imx53-qsb-common: fix FEC pinmux config Tony Lindgren (1): ARM: omap2plus_defconfig: Fix probe errors on UARTs 5 and 6 Volodymyr Bendiuga (1): phy: increase size of MII_BUS_ID_SIZE and bus_id William wu (1): usb: hcd: initialize hcd->flags to 0 when rm hcd Documentation/devicetree/bindings/arm/davinci.txt | 4 ++++ .../devicetree/bindings/vendor-prefixes.txt | 1 + arch/arm/boot/dts/imx53-qsb-common.dtsi | 20 +++++++++--------- arch/arm/configs/omap2plus_defconfig | 1 + arch/sh/kernel/cpu/sh3/setup-sh770x.c | 1 - drivers/gpu/drm/drm_drv.c | 2 +- drivers/iio/trigger/iio-trig-interrupt.c | 8 ++++---- drivers/iio/trigger/iio-trig-sysfs.c | 2 +- drivers/infiniband/ulp/ipoib/ipoib_cm.c | 2 +- drivers/input/keyboard/mpr121_touchkey.c | 24 ++++++++++++++-------- drivers/net/xen-netback/netback.c | 6 ++++-- drivers/staging/iio/trigger/iio-trig-bfin-timer.c | 4 ++-- drivers/tty/serial/sh-sci.c | 17 ++++++++------- drivers/usb/core/hcd.c | 1 + drivers/video/fbdev/pmag-ba-fb.c | 2 +- include/linux/phy.h | 8 ++------ net/ipv4/ah4.c | 3 +++ 17 files changed, 59 insertions(+), 47 deletions(-) -----BEGIN PGP SIGNATURE----- iQIcBAEBCAAGBQJaA2z7AAoJEN6mb/eXdyzcY/8QAJupw2qifHueOo1aV55oBhVU bdaPFKjx/qDW9h+K3lbAIESv9LO2tnrWGyWwEr+WnALF8v34h4z5SyvlH1IbiANz FFS66JijtewDecrGd1jSDFsA31Fb/Fy42vHQIYMxiZFETByr3U4NlDS1zkzvp/IH tF1hVu9pMZXWhRLi1h1YxZe97ZU9Ryj+euMGAQW/PZsn3ZNu3YzOi8GqfHgXeCZE YmsKGU9brevJPJFbm2hBrxCfiRmtUgzb4eb914Mf0zm1B0HOmr3vKtsW/6QvDAYE rGrVXpUMyfoP80WJH9Mxw5qLeKnpSi6o5jdzXf3arzt5JJIyj8XL5X/C6IuoxTNx LbCFfJpW4Qyf+yIW01eM7f3zSlimTyLtih7cwMTGNge0LcAnFcrL+MC+s36tOpvG UH+HxDwzG+7dqnfTb/5ypbsZI6srgyb5PbxEuFzG/YM2/Es1QfWS9zPOzdaPE+Xn WzjU+CbIrSoiJc5qi/61nlhBVK+aNSIIyuNCGjY3FQV4OTYAAKWpezZa0uMFZS5r L3GCaYqZr551Z8uTOm0a4tiZ+1jZPlZ1Tv8YUGr0MqrcR2B0DIIxAeNgOnd8M2op acJkngJiYGrNGp3ZznZvv9ZMPPktRysVwN8u5s/SQvjDlYzCZhAPvnEsRezWLzuk 2/NLxsxp8qRMMK6d8LVh =kzGq -----END PGP SIGNATURE-----

7 years, 9 months

2
1
0 0

Re: [Linux-stable-mirror] [PATCH] HID: wacom: generic: Recognize WACOM_HID_WD_PEN as a type of pen collection

by Jason Gerecke

On Thu, Oct 19, 2017 at 1:22 AM, Jiri Kosina <jikos(a)kernel.org> wrote: > On Wed, 18 Oct 2017, Jason Gerecke wrote: > >> The WACOM_PEN_FIELD macro is used to determine if a given HID field should be >> associated with pen input. This field includes several known collection types >> that Wacom pen data is contained in, but the WACOM_HID_WD_PEN application >> collection type is notably missing. This can result in fields within this >> kind of collection being completely ignored by the `wacom_usage_mapping` >> function, preventing the later '*_event' functions from being notified about >> changes to their value. >> >> Fixes: c9c095874a ("HID: wacom: generic: Support and use 'Custom HID' mode and usages") >> Fixes: ac2423c975 ("HID: wacom: generic: add vendor defined touch") >> Cc: stable(a)vger.kernel.org >> Signed-off-by: Jason Gerecke <jason.gerecke(a)wacom.com> > > Applied to for-4.14/upstream-fixes > > -- > Jiri Kosina > SUSE Labs > Was this branch ever sent to Linus? I don't see any mention of it (or this patch) in the 4.14-rc8 history... Jason --- Now instead of four in the eights place / you’ve got three, ‘Cause you added one / (That is to say, eight) to the two, / But you can’t take seven from three, / So you look at the sixty-fours....

7 years, 9 months

1
0
0 0

2025

2024

2023

2022

2021

2020

2019

2018

2017

Linux-stable-mirror