- Linux-stable-mirror - lists.linaro.org

[Linux-stable-mirror] Patch "ARM: dts: Fix compatible for ti81xx uarts for 8250" has been added to the 4.9-stable tree

by gregkh＠linuxfoundation.org

This is a note to let you know that I've just added the patch titled ARM: dts: Fix compatible for ti81xx uarts for 8250 to the 4.9-stable tree which can be found at: http://www.kernel.org/git/?p=linux/kernel/git/stable/stable-queue.git;a=sum… The filename of the patch is: arm-dts-fix-compatible-for-ti81xx-uarts-for-8250.patch and it can be found in the queue-4.9 subdirectory. If you, or anyone else, feels it should not be added to the stable tree, please let <stable(a)vger.kernel.org> know about it. >From foo@baz Sun Nov 19 11:32:28 CET 2017 From: Tony Lindgren <tony(a)atomide.com> Date: Thu, 5 Jan 2017 11:17:30 -0800 Subject: ARM: dts: Fix compatible for ti81xx uarts for 8250 From: Tony Lindgren <tony(a)atomide.com> [ Upstream commit f62280efe8934a1275fd148ef302d1afec8cd3df ] When using 8250_omap driver, we need to specify the right compatible value for the UART to work on dm814x and dm816x. Signed-off-by: Tony Lindgren <tony(a)atomide.com> Signed-off-by: Sasha Levin <alexander.levin(a)verizon.com> Signed-off-by: Greg Kroah-Hartman <gregkh(a)linuxfoundation.org> --- arch/arm/boot/dts/dm814x.dtsi | 6 +++--- arch/arm/boot/dts/dm816x.dtsi | 6 +++--- 2 files changed, 6 insertions(+), 6 deletions(-) --- a/arch/arm/boot/dts/dm814x.dtsi +++ b/arch/arm/boot/dts/dm814x.dtsi @@ -252,7 +252,7 @@ }; uart1: uart@20000 { - compatible = "ti,omap3-uart"; + compatible = "ti,am3352-uart", "ti,omap3-uart"; ti,hwmods = "uart1"; reg = <0x20000 0x2000>; clock-frequency = <48000000>; @@ -262,7 +262,7 @@ }; uart2: uart@22000 { - compatible = "ti,omap3-uart"; + compatible = "ti,am3352-uart", "ti,omap3-uart"; ti,hwmods = "uart2"; reg = <0x22000 0x2000>; clock-frequency = <48000000>; @@ -272,7 +272,7 @@ }; uart3: uart@24000 { - compatible = "ti,omap3-uart"; + compatible = "ti,am3352-uart", "ti,omap3-uart"; ti,hwmods = "uart3"; reg = <0x24000 0x2000>; clock-frequency = <48000000>; --- a/arch/arm/boot/dts/dm816x.dtsi +++ b/arch/arm/boot/dts/dm816x.dtsi @@ -371,7 +371,7 @@ }; uart1: uart@48020000 { - compatible = "ti,omap3-uart"; + compatible = "ti,am3352-uart", "ti,omap3-uart"; ti,hwmods = "uart1"; reg = <0x48020000 0x2000>; clock-frequency = <48000000>; @@ -381,7 +381,7 @@ }; uart2: uart@48022000 { - compatible = "ti,omap3-uart"; + compatible = "ti,am3352-uart", "ti,omap3-uart"; ti,hwmods = "uart2"; reg = <0x48022000 0x2000>; clock-frequency = <48000000>; @@ -391,7 +391,7 @@ }; uart3: uart@48024000 { - compatible = "ti,omap3-uart"; + compatible = "ti,am3352-uart", "ti,omap3-uart"; ti,hwmods = "uart3"; reg = <0x48024000 0x2000>; clock-frequency = <48000000>; Patches currently in stable-queue which might be from tony(a)atomide.com are queue-4.9/arm-dts-omap5-uevm-allow-bootloader-to-configure-usb-ethernet-mac.patch queue-4.9/arm-dts-fix-omap3-off-mode-pull-defines.patch queue-4.9/arm-dts-fix-compatible-for-ti81xx-uarts-for-8250.patch queue-4.9/arm-omap2-fix-init-for-multiple-quirks-for-the-same-soc.patch queue-4.9/arm-dts-fix-am335x-and-dm814x-scm-syscon-to-probe-children.patch

7 years, 9 months

1
0
0 0

[Linux-stable-mirror] Patch "ARM: dts: Fix am335x and dm814x scm syscon to probe children" has been added to the 4.9-stable tree

by gregkh＠linuxfoundation.org

This is a note to let you know that I've just added the patch titled ARM: dts: Fix am335x and dm814x scm syscon to probe children to the 4.9-stable tree which can be found at: http://www.kernel.org/git/?p=linux/kernel/git/stable/stable-queue.git;a=sum… The filename of the patch is: arm-dts-fix-am335x-and-dm814x-scm-syscon-to-probe-children.patch and it can be found in the queue-4.9 subdirectory. If you, or anyone else, feels it should not be added to the stable tree, please let <stable(a)vger.kernel.org> know about it. >From foo@baz Sun Nov 19 11:32:28 CET 2017 From: Tony Lindgren <tony(a)atomide.com> Date: Thu, 5 Jan 2017 11:10:40 -0800 Subject: ARM: dts: Fix am335x and dm814x scm syscon to probe children From: Tony Lindgren <tony(a)atomide.com> [ Upstream commit 1aa09df0854efe16b7a80358a18f0a0bebafd246 ] Without these changes children of the scn syscon won't probe. Signed-off-by: Tony Lindgren <tony(a)atomide.com> Signed-off-by: Sasha Levin <alexander.levin(a)verizon.com> Signed-off-by: Greg Kroah-Hartman <gregkh(a)linuxfoundation.org> --- arch/arm/boot/dts/am33xx.dtsi | 3 ++- arch/arm/boot/dts/dm814x.dtsi | 3 ++- 2 files changed, 4 insertions(+), 2 deletions(-) --- a/arch/arm/boot/dts/am33xx.dtsi +++ b/arch/arm/boot/dts/am33xx.dtsi @@ -143,10 +143,11 @@ }; scm_conf: scm_conf@0 { - compatible = "syscon"; + compatible = "syscon", "simple-bus"; reg = <0x0 0x800>; #address-cells = <1>; #size-cells = <1>; + ranges = <0 0 0x800>; scm_clocks: clocks { #address-cells = <1>; --- a/arch/arm/boot/dts/dm814x.dtsi +++ b/arch/arm/boot/dts/dm814x.dtsi @@ -332,10 +332,11 @@ ranges = <0 0x140000 0x20000>; scm_conf: scm_conf@0 { - compatible = "syscon"; + compatible = "syscon", "simple-bus"; reg = <0x0 0x800>; #address-cells = <1>; #size-cells = <1>; + ranges = <0 0 0x800>; scm_clocks: clocks { #address-cells = <1>; Patches currently in stable-queue which might be from tony(a)atomide.com are queue-4.9/arm-dts-omap5-uevm-allow-bootloader-to-configure-usb-ethernet-mac.patch queue-4.9/arm-dts-fix-omap3-off-mode-pull-defines.patch queue-4.9/arm-dts-fix-compatible-for-ti81xx-uarts-for-8250.patch queue-4.9/arm-omap2-fix-init-for-multiple-quirks-for-the-same-soc.patch queue-4.9/arm-dts-fix-am335x-and-dm814x-scm-syscon-to-probe-children.patch

7 years, 9 months

1
0
0 0

[Linux-stable-mirror] Patch "ALSA: vx: Don't try to update capture stream before running" has been added to the 4.9-stable tree

by gregkh＠linuxfoundation.org

This is a note to let you know that I've just added the patch titled ALSA: vx: Don't try to update capture stream before running to the 4.9-stable tree which can be found at: http://www.kernel.org/git/?p=linux/kernel/git/stable/stable-queue.git;a=sum… The filename of the patch is: alsa-vx-don-t-try-to-update-capture-stream-before-running.patch and it can be found in the queue-4.9 subdirectory. If you, or anyone else, feels it should not be added to the stable tree, please let <stable(a)vger.kernel.org> know about it. >From foo@baz Sun Nov 19 11:32:28 CET 2017 From: Takashi Iwai <tiwai(a)suse.de> Date: Wed, 4 Jan 2017 12:34:14 +0100 Subject: ALSA: vx: Don't try to update capture stream before running From: Takashi Iwai <tiwai(a)suse.de> [ Upstream commit ed3c177d960bb5881b945ca6f784868126bb90db ] The update of stream costs significantly, and we should avoid it unless the stream really has started. Check pipe->running flag instead of pipe->prepared. Signed-off-by: Takashi Iwai <tiwai(a)suse.de> Signed-off-by: Sasha Levin <alexander.levin(a)verizon.com> Signed-off-by: Greg Kroah-Hartman <gregkh(a)linuxfoundation.org> --- sound/drivers/vx/vx_pcm.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) --- a/sound/drivers/vx/vx_pcm.c +++ b/sound/drivers/vx/vx_pcm.c @@ -1015,7 +1015,7 @@ static void vx_pcm_capture_update(struct int size, space, count; struct snd_pcm_runtime *runtime = subs->runtime; - if (! pipe->prepared || (chip->chip_status & VX_STAT_IS_STALE)) + if (!pipe->running || (chip->chip_status & VX_STAT_IS_STALE)) return; size = runtime->buffer_size - snd_pcm_capture_avail(runtime); Patches currently in stable-queue which might be from tiwai(a)suse.de are queue-4.9/alsa-vx-don-t-try-to-update-capture-stream-before-running.patch queue-4.9/alsa-vx-fix-possible-transfer-overflow.patch queue-4.9/alsa-hda-realtek-add-new-codec-id-alc299.patch

7 years, 9 months

1
0
0 0

[Linux-stable-mirror] Patch "ALSA: vx: Fix possible transfer overflow" has been added to the 4.9-stable tree

by gregkh＠linuxfoundation.org

This is a note to let you know that I've just added the patch titled ALSA: vx: Fix possible transfer overflow to the 4.9-stable tree which can be found at: http://www.kernel.org/git/?p=linux/kernel/git/stable/stable-queue.git;a=sum… The filename of the patch is: alsa-vx-fix-possible-transfer-overflow.patch and it can be found in the queue-4.9 subdirectory. If you, or anyone else, feels it should not be added to the stable tree, please let <stable(a)vger.kernel.org> know about it. >From foo@baz Sun Nov 19 11:32:28 CET 2017 From: Takashi Iwai <tiwai(a)suse.de> Date: Wed, 4 Jan 2017 12:19:15 +0100 Subject: ALSA: vx: Fix possible transfer overflow From: Takashi Iwai <tiwai(a)suse.de> [ Upstream commit 874e1f6fad9a5184b67f4cee37c1335cd2cc5677 ] The pseudo DMA transfer codes in VX222 and VX-pocket driver have a slight bug where they check the buffer boundary wrongly, and may overflow. Also, the zero sample count might be handled badly for the playback (although it shouldn't happen in theory). This patch addresses these issues. Bugzilla: https://bugzilla.kernel.org/show_bug.cgi?id=141541 Signed-off-by: Takashi Iwai <tiwai(a)suse.de> Signed-off-by: Sasha Levin <alexander.levin(a)verizon.com> Signed-off-by: Greg Kroah-Hartman <gregkh(a)linuxfoundation.org> --- sound/drivers/vx/vx_pcm.c | 6 ++++-- sound/pci/vx222/vx222_ops.c | 12 ++++++------ sound/pcmcia/vx/vxp_ops.c | 12 ++++++------ 3 files changed, 16 insertions(+), 14 deletions(-) --- a/sound/drivers/vx/vx_pcm.c +++ b/sound/drivers/vx/vx_pcm.c @@ -1048,8 +1048,10 @@ static void vx_pcm_capture_update(struct /* ok, let's accelerate! */ int align = pipe->align * 3; space = (count / align) * align; - vx_pseudo_dma_read(chip, runtime, pipe, space); - count -= space; + if (space > 0) { + vx_pseudo_dma_read(chip, runtime, pipe, space); + count -= space; + } } /* read the rest of bytes */ while (count > 0) { --- a/sound/pci/vx222/vx222_ops.c +++ b/sound/pci/vx222/vx222_ops.c @@ -269,12 +269,12 @@ static void vx2_dma_write(struct vx_core /* Transfer using pseudo-dma. */ - if (offset + count > pipe->buffer_bytes) { + if (offset + count >= pipe->buffer_bytes) { int length = pipe->buffer_bytes - offset; count -= length; length >>= 2; /* in 32bit words */ /* Transfer using pseudo-dma. */ - while (length-- > 0) { + for (; length > 0; length--) { outl(cpu_to_le32(*addr), port); addr++; } @@ -284,7 +284,7 @@ static void vx2_dma_write(struct vx_core pipe->hw_ptr += count; count >>= 2; /* in 32bit words */ /* Transfer using pseudo-dma. */ - while (count-- > 0) { + for (; count > 0; count--) { outl(cpu_to_le32(*addr), port); addr++; } @@ -307,12 +307,12 @@ static void vx2_dma_read(struct vx_core vx2_setup_pseudo_dma(chip, 0); /* Transfer using pseudo-dma. */ - if (offset + count > pipe->buffer_bytes) { + if (offset + count >= pipe->buffer_bytes) { int length = pipe->buffer_bytes - offset; count -= length; length >>= 2; /* in 32bit words */ /* Transfer using pseudo-dma. */ - while (length-- > 0) + for (; length > 0; length--) *addr++ = le32_to_cpu(inl(port)); addr = (u32 *)runtime->dma_area; pipe->hw_ptr = 0; @@ -320,7 +320,7 @@ static void vx2_dma_read(struct vx_core pipe->hw_ptr += count; count >>= 2; /* in 32bit words */ /* Transfer using pseudo-dma. */ - while (count-- > 0) + for (; count > 0; count--) *addr++ = le32_to_cpu(inl(port)); vx2_release_pseudo_dma(chip); --- a/sound/pcmcia/vx/vxp_ops.c +++ b/sound/pcmcia/vx/vxp_ops.c @@ -369,12 +369,12 @@ static void vxp_dma_write(struct vx_core unsigned short *addr = (unsigned short *)(runtime->dma_area + offset); vx_setup_pseudo_dma(chip, 1); - if (offset + count > pipe->buffer_bytes) { + if (offset + count >= pipe->buffer_bytes) { int length = pipe->buffer_bytes - offset; count -= length; length >>= 1; /* in 16bit words */ /* Transfer using pseudo-dma. */ - while (length-- > 0) { + for (; length > 0; length--) { outw(cpu_to_le16(*addr), port); addr++; } @@ -384,7 +384,7 @@ static void vxp_dma_write(struct vx_core pipe->hw_ptr += count; count >>= 1; /* in 16bit words */ /* Transfer using pseudo-dma. */ - while (count-- > 0) { + for (; count > 0; count--) { outw(cpu_to_le16(*addr), port); addr++; } @@ -411,12 +411,12 @@ static void vxp_dma_read(struct vx_core if (snd_BUG_ON(count % 2)) return; vx_setup_pseudo_dma(chip, 0); - if (offset + count > pipe->buffer_bytes) { + if (offset + count >= pipe->buffer_bytes) { int length = pipe->buffer_bytes - offset; count -= length; length >>= 1; /* in 16bit words */ /* Transfer using pseudo-dma. */ - while (length-- > 0) + for (; length > 0; length--) *addr++ = le16_to_cpu(inw(port)); addr = (unsigned short *)runtime->dma_area; pipe->hw_ptr = 0; @@ -424,7 +424,7 @@ static void vxp_dma_read(struct vx_core pipe->hw_ptr += count; count >>= 1; /* in 16bit words */ /* Transfer using pseudo-dma. */ - while (count-- > 1) + for (; count > 1; count--) *addr++ = le16_to_cpu(inw(port)); /* Disable DMA */ pchip->regDIALOG &= ~VXP_DLG_DMAREAD_SEL_MASK; Patches currently in stable-queue which might be from tiwai(a)suse.de are queue-4.9/alsa-vx-don-t-try-to-update-capture-stream-before-running.patch queue-4.9/alsa-vx-fix-possible-transfer-overflow.patch queue-4.9/alsa-hda-realtek-add-new-codec-id-alc299.patch

7 years, 9 months

1
0
0 0

[Linux-stable-mirror] Patch "ALSA: hda/realtek - Add new codec ID ALC299" has been added to the 4.9-stable tree

by gregkh＠linuxfoundation.org

This is a note to let you know that I've just added the patch titled ALSA: hda/realtek - Add new codec ID ALC299 to the 4.9-stable tree which can be found at: http://www.kernel.org/git/?p=linux/kernel/git/stable/stable-queue.git;a=sum… The filename of the patch is: alsa-hda-realtek-add-new-codec-id-alc299.patch and it can be found in the queue-4.9 subdirectory. If you, or anyone else, feels it should not be added to the stable tree, please let <stable(a)vger.kernel.org> know about it. >From foo@baz Sun Nov 19 11:32:28 CET 2017 From: Kailang Yang <kailang(a)realtek.com> Date: Wed, 4 Jan 2017 14:49:07 +0800 Subject: ALSA: hda/realtek - Add new codec ID ALC299 From: Kailang Yang <kailang(a)realtek.com> [ Upstream commit 28f1f9b26cee161ddd3985b3eb78e3ffada08dda ] ALC299 was similar as ALC225. Add headset support for ALC299. ALC3271 was for Dell rename. Signed-off-by: Kailang Yang <kailang(a)realtek.com> Signed-off-by: Takashi Iwai <tiwai(a)suse.de> Signed-off-by: Sasha Levin <alexander.levin(a)verizon.com> Signed-off-by: Greg Kroah-Hartman <gregkh(a)linuxfoundation.org> --- sound/pci/hda/patch_realtek.c | 10 ++++++++++ 1 file changed, 10 insertions(+) --- a/sound/pci/hda/patch_realtek.c +++ b/sound/pci/hda/patch_realtek.c @@ -338,6 +338,7 @@ static void alc_fill_eapd_coef(struct hd case 0x10ec0288: case 0x10ec0295: case 0x10ec0298: + case 0x10ec0299: alc_update_coef_idx(codec, 0x10, 1<<9, 0); break; case 0x10ec0285: @@ -914,6 +915,7 @@ static struct alc_codec_rename_pci_table { 0x10ec0256, 0x1028, 0, "ALC3246" }, { 0x10ec0225, 0x1028, 0, "ALC3253" }, { 0x10ec0295, 0x1028, 0, "ALC3254" }, + { 0x10ec0299, 0x1028, 0, "ALC3271" }, { 0x10ec0670, 0x1025, 0, "ALC669X" }, { 0x10ec0676, 0x1025, 0, "ALC679X" }, { 0x10ec0282, 0x1043, 0, "ALC3229" }, @@ -3721,6 +3723,7 @@ static void alc_headset_mode_unplugged(s break; case 0x10ec0225: case 0x10ec0295: + case 0x10ec0299: alc_process_coef_fw(codec, coef0225); break; case 0x10ec0867: @@ -3829,6 +3832,7 @@ static void alc_headset_mode_mic_in(stru break; case 0x10ec0225: case 0x10ec0295: + case 0x10ec0299: alc_update_coef_idx(codec, 0x45, 0x3f<<10, 0x31<<10); snd_hda_set_pin_ctl_cache(codec, hp_pin, 0); alc_process_coef_fw(codec, coef0225); @@ -3887,6 +3891,7 @@ static void alc_headset_mode_default(str switch (codec->core.vendor_id) { case 0x10ec0225: case 0x10ec0295: + case 0x10ec0299: alc_process_coef_fw(codec, coef0225); break; case 0x10ec0236: @@ -4004,6 +4009,7 @@ static void alc_headset_mode_ctia(struct break; case 0x10ec0225: case 0x10ec0295: + case 0x10ec0299: alc_process_coef_fw(codec, coef0225); break; case 0x10ec0867: @@ -4098,6 +4104,7 @@ static void alc_headset_mode_omtp(struct break; case 0x10ec0225: case 0x10ec0295: + case 0x10ec0299: alc_process_coef_fw(codec, coef0225); break; } @@ -4183,6 +4190,7 @@ static void alc_determine_headset_type(s break; case 0x10ec0225: case 0x10ec0295: + case 0x10ec0299: alc_process_coef_fw(codec, coef0225); msleep(800); val = alc_read_coef_idx(codec, 0x46); @@ -6251,6 +6259,7 @@ static int patch_alc269(struct hda_codec break; case 0x10ec0225: case 0x10ec0295: + case 0x10ec0299: spec->codec_variant = ALC269_TYPE_ALC225; break; case 0x10ec0234: @@ -7249,6 +7258,7 @@ static const struct hda_device_id snd_hd HDA_CODEC_ENTRY(0x10ec0294, "ALC294", patch_alc269), HDA_CODEC_ENTRY(0x10ec0295, "ALC295", patch_alc269), HDA_CODEC_ENTRY(0x10ec0298, "ALC298", patch_alc269), + HDA_CODEC_ENTRY(0x10ec0299, "ALC299", patch_alc269), HDA_CODEC_REV_ENTRY(0x10ec0861, 0x100340, "ALC660", patch_alc861), HDA_CODEC_ENTRY(0x10ec0660, "ALC660-VD", patch_alc861vd), HDA_CODEC_ENTRY(0x10ec0861, "ALC861", patch_alc861), Patches currently in stable-queue which might be from kailang(a)realtek.com are queue-4.9/alsa-hda-realtek-add-new-codec-id-alc299.patch

7 years, 9 months

1
0
0 0

[Linux-stable-mirror] [PATCH linux-4.4.y] dmaengine: dmatest: warn user when dma test times out

by Adam Wallis

From: Adam Wallis <awallis(a)codeaurora.org> commit a9df21e34b422f79d9a9fa5c3eff8c2a53491be6 upstream. This patch was backported and only needed a line adjustment. Commit adfa543e7314 ("dmatest: don't use set_freezable_with_signal()") introduced a bug (that is in fact documented by the patch commit text) that leaves behind a dangling pointer. Since the done_wait structure is allocated on the stack, future invocations to the DMATEST can produce undesirable results (e.g., corrupted spinlocks). Ideally, this would be cleaned up in the thread handler, but at the very least, the kernel is left in a very precarious scenario that can lead to some long debug sessions when the crash comes later. Bugzilla: https://bugzilla.kernel.org/show_bug.cgi?id=197605 Signed-off-by: Adam Wallis <awallis(a)codeaurora.org> Signed-off-by: Vinod Koul <vinod.koul(a)intel.com> --- drivers/dma/dmatest.c | 1 + 1 file changed, 1 insertion(+) diff --git a/drivers/dma/dmatest.c b/drivers/dma/dmatest.c index b8576fd..1c7568c 100644 --- a/drivers/dma/dmatest.c +++ b/drivers/dma/dmatest.c @@ -634,6 +634,7 @@ static int dmatest_func(void *data) * free it this time?" dancing. For now, just * leave it dangling. */ + WARN(1, "dmatest: Kernel stack may be corrupted!!\n"); dmaengine_unmap_put(um); result("test timed out", total_tests, src_off, dst_off, len, 0); -- Qualcomm Datacenter Technologies as an affiliate of Qualcomm Technologies, Inc. Qualcomm Technologies, Inc. is a member of the Code Aurora Forum, a Linux Foundation Collaborative Project.

7 years, 9 months

2
1
0 0

[Linux-stable-mirror] [PATCH-3.18.y 0/2] target: stable backports

by Nicholas A. Bellinger

From: Nicholas Bellinger <nab(a)linux-iscsi.org> Here are two target patches for v3.18.y stable, the first of which did not originally include a stable CC, and the latter did not apply due to a minor context change. The series has been cut against v3.18.81. Please apply at your earliest convenience. Thank you, --nab Bart Van Assche (1): target/iscsi: Fix iSCSI task reassignment handling Nicholas Bellinger (1): iscsi-target: Fix iscsi_np reset hung task during parallel delete drivers/target/iscsi/iscsi_target.c | 20 ++++++++------------ drivers/target/iscsi/iscsi_target_core.h | 1 + drivers/target/iscsi/iscsi_target_login.c | 7 +++++-- include/target/iscsi/iscsi_target_core.h | 1 + include/target/target_core_base.h | 1 + 5 files changed, 16 insertions(+), 14 deletions(-) -- 1.8.5.3

7 years, 9 months

3
5
0 0

[Linux-stable-mirror] Request for stable inclusion for Bluetooth QCA issue.

by Kai Heng Feng

Hi, Please include commit ("abde15d5eb3d Bluetooth: btusb: fix QCA Rome suspend/resume”) to stable. QCA ROME support was introduced in v4.1, so it should be included in v4.4+. This issue can solve a BLE connection issue for QCA ROME devices. Kai-Heng

7 years, 9 months

3
4
0 0

[Linux-stable-mirror] Patch "xen-blkback: don't leak stack data via response ring" has been added to the 4.4-stable tree

by gregkh＠linuxfoundation.org

This is a note to let you know that I've just added the patch titled xen-blkback: don't leak stack data via response ring to the 4.4-stable tree which can be found at: http://www.kernel.org/git/?p=linux/kernel/git/stable/stable-queue.git;a=sum… The filename of the patch is: xen-blkback-don-t-leak-stack-data-via-response-ring.patch and it can be found in the queue-4.4 subdirectory. If you, or anyone else, feels it should not be added to the stable tree, please let <stable(a)vger.kernel.org> know about it. >From foo@baz Sun Nov 19 11:12:05 CET 2017 From: Jan Beulich <jbeulich(a)suse.com> Date: Tue, 13 Jun 2017 16:28:27 -0400 Subject: xen-blkback: don't leak stack data via response ring From: Jan Beulich <jbeulich(a)suse.com> commit 089bc0143f489bd3a4578bdff5f4ca68fb26f341 upstream. Rather than constructing a local structure instance on the stack, fill the fields directly on the shared ring, just like other backends do. Build on the fact that all response structure flavors are actually identical (the old code did make this assumption too). This is XSA-216. Signed-off-by: Jan Beulich <jbeulich(a)suse.com> Reviewed-by: Konrad Rzeszutek Wilk <konrad.wilk(a)oracle.com> Signed-off-by: Konrad Rzeszutek Wilk <konrad.wilk(a)oracle.com> [bwh: Backported to 4.4: adjust context] Signed-off-by: Ben Hutchings <ben.hutchings(a)codethink.co.uk> Signed-off-by: Greg Kroah-Hartman <gregkh(a)linuxfoundation.org> --- drivers/block/xen-blkback/blkback.c | 23 ++++++++++++----------- drivers/block/xen-blkback/common.h | 25 +++++-------------------- 2 files changed, 17 insertions(+), 31 deletions(-) --- a/drivers/block/xen-blkback/blkback.c +++ b/drivers/block/xen-blkback/blkback.c @@ -1407,33 +1407,34 @@ static int dispatch_rw_block_io(struct x static void make_response(struct xen_blkif *blkif, u64 id, unsigned short op, int st) { - struct blkif_response resp; + struct blkif_response *resp; unsigned long flags; union blkif_back_rings *blk_rings = &blkif->blk_rings; int notify; - resp.id = id; - resp.operation = op; - resp.status = st; - spin_lock_irqsave(&blkif->blk_ring_lock, flags); /* Place on the response ring for the relevant domain. */ switch (blkif->blk_protocol) { case BLKIF_PROTOCOL_NATIVE: - memcpy(RING_GET_RESPONSE(&blk_rings->native, blk_rings->native.rsp_prod_pvt), - &resp, sizeof(resp)); + resp = RING_GET_RESPONSE(&blk_rings->native, + blk_rings->native.rsp_prod_pvt); break; case BLKIF_PROTOCOL_X86_32: - memcpy(RING_GET_RESPONSE(&blk_rings->x86_32, blk_rings->x86_32.rsp_prod_pvt), - &resp, sizeof(resp)); + resp = RING_GET_RESPONSE(&blk_rings->x86_32, + blk_rings->x86_32.rsp_prod_pvt); break; case BLKIF_PROTOCOL_X86_64: - memcpy(RING_GET_RESPONSE(&blk_rings->x86_64, blk_rings->x86_64.rsp_prod_pvt), - &resp, sizeof(resp)); + resp = RING_GET_RESPONSE(&blk_rings->x86_64, + blk_rings->x86_64.rsp_prod_pvt); break; default: BUG(); } + + resp->id = id; + resp->operation = op; + resp->status = st; + blk_rings->common.rsp_prod_pvt++; RING_PUSH_RESPONSES_AND_CHECK_NOTIFY(&blk_rings->common, notify); spin_unlock_irqrestore(&blkif->blk_ring_lock, flags); --- a/drivers/block/xen-blkback/common.h +++ b/drivers/block/xen-blkback/common.h @@ -74,9 +74,8 @@ extern unsigned int xen_blkif_max_ring_o struct blkif_common_request { char dummy; }; -struct blkif_common_response { - char dummy; -}; + +/* i386 protocol version */ struct blkif_x86_32_request_rw { uint8_t nr_segments; /* number of segments */ @@ -128,14 +127,6 @@ struct blkif_x86_32_request { } u; } __attribute__((__packed__)); -/* i386 protocol version */ -#pragma pack(push, 4) -struct blkif_x86_32_response { - uint64_t id; /* copied from request */ - uint8_t operation; /* copied from request */ - int16_t status; /* BLKIF_RSP_??? */ -}; -#pragma pack(pop) /* x86_64 protocol version */ struct blkif_x86_64_request_rw { @@ -192,18 +183,12 @@ struct blkif_x86_64_request { } u; } __attribute__((__packed__)); -struct blkif_x86_64_response { - uint64_t __attribute__((__aligned__(8))) id; - uint8_t operation; /* copied from request */ - int16_t status; /* BLKIF_RSP_??? */ -}; - DEFINE_RING_TYPES(blkif_common, struct blkif_common_request, - struct blkif_common_response); + struct blkif_response); DEFINE_RING_TYPES(blkif_x86_32, struct blkif_x86_32_request, - struct blkif_x86_32_response); + struct blkif_response __packed); DEFINE_RING_TYPES(blkif_x86_64, struct blkif_x86_64_request, - struct blkif_x86_64_response); + struct blkif_response); union blkif_back_rings { struct blkif_back_ring native; Patches currently in stable-queue which might be from jbeulich(a)suse.com are queue-4.4/xen-blkback-don-t-leak-stack-data-via-response-ring.patch

7 years, 9 months

1
0
0 0

[Linux-stable-mirror] Patch "sctp: do not peel off an assoc from one netns to another one" has been added to the 4.4-stable tree

by gregkh＠linuxfoundation.org

This is a note to let you know that I've just added the patch titled sctp: do not peel off an assoc from one netns to another one to the 4.4-stable tree which can be found at: http://www.kernel.org/git/?p=linux/kernel/git/stable/stable-queue.git;a=sum… The filename of the patch is: sctp-do-not-peel-off-an-assoc-from-one-netns-to-another-one.patch and it can be found in the queue-4.4 subdirectory. If you, or anyone else, feels it should not be added to the stable tree, please let <stable(a)vger.kernel.org> know about it. >From foo@baz Sun Nov 19 11:12:05 CET 2017 From: Xin Long <lucien.xin(a)gmail.com> Date: Tue, 17 Oct 2017 23:26:10 +0800 Subject: sctp: do not peel off an assoc from one netns to another one From: Xin Long <lucien.xin(a)gmail.com> commit df80cd9b28b9ebaa284a41df611dbf3a2d05ca74 upstream. Now when peeling off an association to the sock in another netns, all transports in this assoc are not to be rehashed and keep use the old key in hashtable. As a transport uses sk->net as the hash key to insert into hashtable, it would miss removing these transports from hashtable due to the new netns when closing the sock and all transports are being freeed, then later an use-after-free issue could be caused when looking up an asoc and dereferencing those transports. This is a very old issue since very beginning, ChunYu found it with syzkaller fuzz testing with this series: socket$inet6_sctp() bind$inet6() sendto$inet6() unshare(0x40000000) getsockopt$inet_sctp6_SCTP_GET_ASSOC_ID_LIST() getsockopt$inet_sctp6_SCTP_SOCKOPT_PEELOFF() This patch is to block this call when peeling one assoc off from one netns to another one, so that the netns of all transport would not go out-sync with the key in hashtable. Note that this patch didn't fix it by rehashing transports, as it's difficult to handle the situation when the tuple is already in use in the new netns. Besides, no one would like to peel off one assoc to another netns, considering ipaddrs, ifaces, etc. are usually different. Reported-by: ChunYu Wang <chunwang(a)redhat.com> Signed-off-by: Xin Long <lucien.xin(a)gmail.com> Acked-by: Marcelo Ricardo Leitner <marcelo.leitner(a)gmail.com> Acked-by: Neil Horman <nhorman(a)tuxdriver.com> Signed-off-by: David S. Miller <davem(a)davemloft.net> Signed-off-by: Ben Hutchings <ben.hutchings(a)codethink.co.uk> Signed-off-by: Greg Kroah-Hartman <gregkh(a)linuxfoundation.org> --- net/sctp/socket.c | 4 ++++ 1 file changed, 4 insertions(+) --- a/net/sctp/socket.c +++ b/net/sctp/socket.c @@ -4453,6 +4453,10 @@ int sctp_do_peeloff(struct sock *sk, sct struct socket *sock; int err = 0; + /* Do not peel off from one netns to another one. */ + if (!net_eq(current->nsproxy->net_ns, sock_net(sk))) + return -EINVAL; + if (!asoc) return -EINVAL; Patches currently in stable-queue which might be from lucien.xin(a)gmail.com are queue-4.4/sctp-do-not-peel-off-an-assoc-from-one-netns-to-another-one.patch

7 years, 9 months

1
0
0 0

[Linux-stable-mirror] Patch "net: cdc_ether: fix divide by 0 on bad descriptors" has been added to the 4.4-stable tree

by gregkh＠linuxfoundation.org

This is a note to let you know that I've just added the patch titled net: cdc_ether: fix divide by 0 on bad descriptors to the 4.4-stable tree which can be found at: http://www.kernel.org/git/?p=linux/kernel/git/stable/stable-queue.git;a=sum… The filename of the patch is: net-cdc_ether-fix-divide-by-0-on-bad-descriptors.patch and it can be found in the queue-4.4 subdirectory. If you, or anyone else, feels it should not be added to the stable tree, please let <stable(a)vger.kernel.org> know about it. >From foo@baz Sun Nov 19 11:12:05 CET 2017 From: Bjørn Mork <bjorn(a)mork.no> Date: Mon, 6 Nov 2017 15:37:22 +0100 Subject: net: cdc_ether: fix divide by 0 on bad descriptors From: Bjørn Mork <bjorn(a)mork.no> commit 2cb80187ba065d7decad7c6614e35e07aec8a974 upstream. Setting dev->hard_mtu to 0 will cause a divide error in usbnet_probe. Protect against devices with bogus CDC Ethernet functional descriptors by ignoring a zero wMaxSegmentSize. Signed-off-by: BjÃ¸rn Mork <bjorn(a)mork.no> Acked-by: Oliver Neukum <oneukum(a)suse.com> Signed-off-by: David S. Miller <davem(a)davemloft.net> Signed-off-by: Ben Hutchings <ben.hutchings(a)codethink.co.uk> Signed-off-by: Greg Kroah-Hartman <gregkh(a)linuxfoundation.org> --- drivers/net/usb/cdc_ether.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) --- a/drivers/net/usb/cdc_ether.c +++ b/drivers/net/usb/cdc_ether.c @@ -221,7 +221,7 @@ skip: goto bad_desc; } - if (header.usb_cdc_ether_desc) { + if (header.usb_cdc_ether_desc && info->ether->wMaxSegmentSize) { dev->hard_mtu = le16_to_cpu(info->ether->wMaxSegmentSize); /* because of Zaurus, we may be ignoring the host * side link address we were given. Patches currently in stable-queue which might be from bjorn(a)mork.no are queue-4.4/net-cdc_ether-fix-divide-by-0-on-bad-descriptors.patch queue-4.4/net-qmi_wwan-fix-divide-by-0-on-bad-descriptors.patch

7 years, 9 months

1
0
0 0

[Linux-stable-mirror] Patch "net: qmi_wwan: fix divide by 0 on bad descriptors" has been added to the 4.4-stable tree

by gregkh＠linuxfoundation.org

This is a note to let you know that I've just added the patch titled net: qmi_wwan: fix divide by 0 on bad descriptors to the 4.4-stable tree which can be found at: http://www.kernel.org/git/?p=linux/kernel/git/stable/stable-queue.git;a=sum… The filename of the patch is: net-qmi_wwan-fix-divide-by-0-on-bad-descriptors.patch and it can be found in the queue-4.4 subdirectory. If you, or anyone else, feels it should not be added to the stable tree, please let <stable(a)vger.kernel.org> know about it. >From foo@baz Sun Nov 19 11:12:05 CET 2017 From: Bjørn Mork <bjorn(a)mork.no> Date: Mon, 6 Nov 2017 15:32:18 +0100 Subject: net: qmi_wwan: fix divide by 0 on bad descriptors From: Bjørn Mork <bjorn(a)mork.no> commit 7fd078337201cf7468f53c3d9ef81ff78cb6df3b upstream. A CDC Ethernet functional descriptor with wMaxSegmentSize = 0 will cause a divide error in usbnet_probe: divide error: 0000 [#1] PREEMPT SMP KASAN Modules linked in: CPU: 0 PID: 24 Comm: kworker/0:1 Not tainted 4.14.0-rc8-44453-g1fdc1a82c34f #56 Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS Bochs 01/01/2011 Workqueue: usb_hub_wq hub_event task: ffff88006bef5c00 task.stack: ffff88006bf60000 RIP: 0010:usbnet_update_max_qlen+0x24d/0x390 drivers/net/usb/usbnet.c:355 RSP: 0018:ffff88006bf67508 EFLAGS: 00010246 RAX: 00000000000163c8 RBX: ffff8800621fce40 RCX: ffff8800621fcf34 RDX: 0000000000000000 RSI: ffffffff837ecb7a RDI: ffff8800621fcf34 RBP: ffff88006bf67520 R08: ffff88006bef5c00 R09: ffffed000c43f881 R10: ffffed000c43f880 R11: ffff8800621fc406 R12: 0000000000000003 R13: ffffffff85c71de0 R14: 0000000000000000 R15: 0000000000000000 FS: 0000000000000000(0000) GS:ffff88006ca00000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 00007ffe9c0d6dac CR3: 00000000614f4000 CR4: 00000000000006f0 Call Trace: usbnet_probe+0x18b5/0x2790 drivers/net/usb/usbnet.c:1783 qmi_wwan_probe+0x133/0x220 drivers/net/usb/qmi_wwan.c:1338 usb_probe_interface+0x324/0x940 drivers/usb/core/driver.c:361 really_probe drivers/base/dd.c:413 driver_probe_device+0x522/0x740 drivers/base/dd.c:557 Fix by simply ignoring the bogus descriptor, as it is optional for QMI devices anyway. Fixes: 423ce8caab7e ("net: usb: qmi_wwan: New driver for Huawei QMI based WWAN devices") Reported-by: Andrey Konovalov <andreyknvl(a)google.com> Signed-off-by: BjÃ¸rn Mork <bjorn(a)mork.no> Signed-off-by: David S. Miller <davem(a)davemloft.net> Signed-off-by: Ben Hutchings <ben.hutchings(a)codethink.co.uk> Signed-off-by: Greg Kroah-Hartman <gregkh(a)linuxfoundation.org> --- drivers/net/usb/qmi_wwan.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) --- a/drivers/net/usb/qmi_wwan.c +++ b/drivers/net/usb/qmi_wwan.c @@ -262,7 +262,7 @@ static int qmi_wwan_bind(struct usbnet * } /* errors aren't fatal - we can live with the dynamic address */ - if (cdc_ether) { + if (cdc_ether && cdc_ether->wMaxSegmentSize) { dev->hard_mtu = le16_to_cpu(cdc_ether->wMaxSegmentSize); usbnet_get_ethernet_addr(dev, cdc_ether->iMACAddress); } Patches currently in stable-queue which might be from bjorn(a)mork.no are queue-4.4/net-cdc_ether-fix-divide-by-0-on-bad-descriptors.patch queue-4.4/net-qmi_wwan-fix-divide-by-0-on-bad-descriptors.patch

7 years, 9 months

1
0
0 0

[Linux-stable-mirror] Patch "media: dib0700: fix invalid dvb_detach argument" has been added to the 4.4-stable tree

by gregkh＠linuxfoundation.org

This is a note to let you know that I've just added the patch titled media: dib0700: fix invalid dvb_detach argument to the 4.4-stable tree which can be found at: http://www.kernel.org/git/?p=linux/kernel/git/stable/stable-queue.git;a=sum… The filename of the patch is: media-dib0700-fix-invalid-dvb_detach-argument.patch and it can be found in the queue-4.4 subdirectory. If you, or anyone else, feels it should not be added to the stable tree, please let <stable(a)vger.kernel.org> know about it. >From eb0c19942288569e0ae492476534d5a485fb8ab4 Mon Sep 17 00:00:00 2001 From: Andrey Konovalov <andreyknvl(a)google.com> Date: Thu, 2 Nov 2017 10:38:21 -0400 Subject: media: dib0700: fix invalid dvb_detach argument From: Andrey Konovalov <andreyknvl(a)google.com> commit eb0c19942288569e0ae492476534d5a485fb8ab4 upstream. dvb_detach(arg) calls symbol_put_addr(arg), where arg should be a pointer to a function. Right now a pointer to state->dib7000p_ops is passed to dvb_detach(), which causes a BUG() in symbol_put_addr() as discovered by syzkaller. Pass state->dib7000p_ops.set_wbd_ref instead. ------------[ cut here ]------------ kernel BUG at kernel/module.c:1081! invalid opcode: 0000 [#1] PREEMPT SMP KASAN Modules linked in: CPU: 1 PID: 1151 Comm: kworker/1:1 Tainted: G W 4.14.0-rc1-42251-gebb2c2437d80 #224 Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS Bochs 01/01/2011 Workqueue: usb_hub_wq hub_event task: ffff88006a336300 task.stack: ffff88006a7c8000 RIP: 0010:symbol_put_addr+0x54/0x60 kernel/module.c:1083 RSP: 0018:ffff88006a7ce210 EFLAGS: 00010246 RAX: 0000000000000000 RBX: ffff880062a8d190 RCX: 0000000000000000 RDX: dffffc0000000020 RSI: ffffffff85876d60 RDI: ffff880062a8d190 RBP: ffff88006a7ce218 R08: 1ffff1000d4f9c12 R09: 1ffff1000d4f9ae4 R10: 1ffff1000d4f9bed R11: 0000000000000000 R12: ffff880062a8d180 R13: 00000000ffffffed R14: ffff880062a8d190 R15: ffff88006947c000 FS: 0000000000000000(0000) GS:ffff88006c900000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 00007f6416532000 CR3: 00000000632f5000 CR4: 00000000000006e0 Call Trace: stk7070p_frontend_attach+0x515/0x610 drivers/media/usb/dvb-usb/dib0700_devices.c:1013 dvb_usb_adapter_frontend_init+0x32b/0x660 drivers/media/usb/dvb-usb/dvb-usb-dvb.c:286 dvb_usb_adapter_init drivers/media/usb/dvb-usb/dvb-usb-init.c:86 dvb_usb_init drivers/media/usb/dvb-usb/dvb-usb-init.c:162 dvb_usb_device_init+0xf70/0x17f0 drivers/media/usb/dvb-usb/dvb-usb-init.c:277 dib0700_probe+0x171/0x5a0 drivers/media/usb/dvb-usb/dib0700_core.c:886 usb_probe_interface+0x35d/0x8e0 drivers/usb/core/driver.c:361 really_probe drivers/base/dd.c:413 driver_probe_device+0x610/0xa00 drivers/base/dd.c:557 __device_attach_driver+0x230/0x290 drivers/base/dd.c:653 bus_for_each_drv+0x161/0x210 drivers/base/bus.c:463 __device_attach+0x26e/0x3d0 drivers/base/dd.c:710 device_initial_probe+0x1f/0x30 drivers/base/dd.c:757 bus_probe_device+0x1eb/0x290 drivers/base/bus.c:523 device_add+0xd0b/0x1660 drivers/base/core.c:1835 usb_set_configuration+0x104e/0x1870 drivers/usb/core/message.c:1932 generic_probe+0x73/0xe0 drivers/usb/core/generic.c:174 usb_probe_device+0xaf/0xe0 drivers/usb/core/driver.c:266 really_probe drivers/base/dd.c:413 driver_probe_device+0x610/0xa00 drivers/base/dd.c:557 __device_attach_driver+0x230/0x290 drivers/base/dd.c:653 bus_for_each_drv+0x161/0x210 drivers/base/bus.c:463 __device_attach+0x26e/0x3d0 drivers/base/dd.c:710 device_initial_probe+0x1f/0x30 drivers/base/dd.c:757 bus_probe_device+0x1eb/0x290 drivers/base/bus.c:523 device_add+0xd0b/0x1660 drivers/base/core.c:1835 usb_new_device+0x7b8/0x1020 drivers/usb/core/hub.c:2457 hub_port_connect drivers/usb/core/hub.c:4903 hub_port_connect_change drivers/usb/core/hub.c:5009 port_event drivers/usb/core/hub.c:5115 hub_event+0x194d/0x3740 drivers/usb/core/hub.c:5195 process_one_work+0xc7f/0x1db0 kernel/workqueue.c:2119 worker_thread+0x221/0x1850 kernel/workqueue.c:2253 kthread+0x3a1/0x470 kernel/kthread.c:231 ret_from_fork+0x2a/0x40 arch/x86/entry/entry_64.S:431 Code: ff ff 48 85 c0 74 24 48 89 c7 e8 48 ea ff ff bf 01 00 00 00 e8 de 20 e3 ff 65 8b 05 b7 2f c2 7e 85 c0 75 c9 e8 f9 0b c1 ff eb c2 <0f> 0b 66 2e 0f 1f 84 00 00 00 00 00 0f 1f 44 00 00 48 b8 00 00 RIP: symbol_put_addr+0x54/0x60 RSP: ffff88006a7ce210 ---[ end trace b75b357739e7e116 ]--- Signed-off-by: Andrey Konovalov <andreyknvl(a)google.com> Cc: Ben Hutchings <ben.hutchings(a)codethink.co.uk> Signed-off-by: Mauro Carvalho Chehab <mchehab(a)s-opensource.com> Signed-off-by: Greg Kroah-Hartman <gregkh(a)linuxfoundation.org> --- drivers/media/usb/dvb-usb/dib0700_devices.c | 24 ++++++++++++------------ 1 file changed, 12 insertions(+), 12 deletions(-) --- a/drivers/media/usb/dvb-usb/dib0700_devices.c +++ b/drivers/media/usb/dvb-usb/dib0700_devices.c @@ -292,7 +292,7 @@ static int stk7700P2_frontend_attach(str stk7700d_dib7000p_mt2266_config) != 0) { err("%s: state->dib7000p_ops.i2c_enumeration failed. Cannot continue\n", __func__); - dvb_detach(&state->dib7000p_ops); + dvb_detach(state->dib7000p_ops.set_wbd_ref); return -ENODEV; } } @@ -326,7 +326,7 @@ static int stk7700d_frontend_attach(stru stk7700d_dib7000p_mt2266_config) != 0) { err("%s: state->dib7000p_ops.i2c_enumeration failed. Cannot continue\n", __func__); - dvb_detach(&state->dib7000p_ops); + dvb_detach(state->dib7000p_ops.set_wbd_ref); return -ENODEV; } } @@ -479,7 +479,7 @@ static int stk7700ph_frontend_attach(str &stk7700ph_dib7700_xc3028_config) != 0) { err("%s: state->dib7000p_ops.i2c_enumeration failed. Cannot continue\n", __func__); - dvb_detach(&state->dib7000p_ops); + dvb_detach(state->dib7000p_ops.set_wbd_ref); return -ENODEV; } @@ -1010,7 +1010,7 @@ static int stk7070p_frontend_attach(stru &dib7070p_dib7000p_config) != 0) { err("%s: state->dib7000p_ops.i2c_enumeration failed. Cannot continue\n", __func__); - dvb_detach(&state->dib7000p_ops); + dvb_detach(state->dib7000p_ops.set_wbd_ref); return -ENODEV; } @@ -1068,7 +1068,7 @@ static int stk7770p_frontend_attach(stru &dib7770p_dib7000p_config) != 0) { err("%s: state->dib7000p_ops.i2c_enumeration failed. Cannot continue\n", __func__); - dvb_detach(&state->dib7000p_ops); + dvb_detach(state->dib7000p_ops.set_wbd_ref); return -ENODEV; } @@ -3036,7 +3036,7 @@ static int nim7090_frontend_attach(struc if (state->dib7000p_ops.i2c_enumeration(&adap->dev->i2c_adap, 1, 0x10, &nim7090_dib7000p_config) != 0) { err("%s: state->dib7000p_ops.i2c_enumeration failed. Cannot continue\n", __func__); - dvb_detach(&state->dib7000p_ops); + dvb_detach(state->dib7000p_ops.set_wbd_ref); return -ENODEV; } adap->fe_adap[0].fe = state->dib7000p_ops.init(&adap->dev->i2c_adap, 0x80, &nim7090_dib7000p_config); @@ -3089,7 +3089,7 @@ static int tfe7090pvr_frontend0_attach(s /* initialize IC 0 */ if (state->dib7000p_ops.i2c_enumeration(&adap->dev->i2c_adap, 1, 0x20, &tfe7090pvr_dib7000p_config[0]) != 0) { err("%s: state->dib7000p_ops.i2c_enumeration failed. Cannot continue\n", __func__); - dvb_detach(&state->dib7000p_ops); + dvb_detach(state->dib7000p_ops.set_wbd_ref); return -ENODEV; } @@ -3119,7 +3119,7 @@ static int tfe7090pvr_frontend1_attach(s i2c = state->dib7000p_ops.get_i2c_master(adap->dev->adapter[0].fe_adap[0].fe, DIBX000_I2C_INTERFACE_GPIO_6_7, 1); if (state->dib7000p_ops.i2c_enumeration(i2c, 1, 0x10, &tfe7090pvr_dib7000p_config[1]) != 0) { err("%s: state->dib7000p_ops.i2c_enumeration failed. Cannot continue\n", __func__); - dvb_detach(&state->dib7000p_ops); + dvb_detach(state->dib7000p_ops.set_wbd_ref); return -ENODEV; } @@ -3194,7 +3194,7 @@ static int tfe7790p_frontend_attach(stru 1, 0x10, &tfe7790p_dib7000p_config) != 0) { err("%s: state->dib7000p_ops.i2c_enumeration failed. Cannot continue\n", __func__); - dvb_detach(&state->dib7000p_ops); + dvb_detach(state->dib7000p_ops.set_wbd_ref); return -ENODEV; } adap->fe_adap[0].fe = state->dib7000p_ops.init(&adap->dev->i2c_adap, @@ -3289,7 +3289,7 @@ static int stk7070pd_frontend_attach0(st stk7070pd_dib7000p_config) != 0) { err("%s: state->dib7000p_ops.i2c_enumeration failed. Cannot continue\n", __func__); - dvb_detach(&state->dib7000p_ops); + dvb_detach(state->dib7000p_ops.set_wbd_ref); return -ENODEV; } @@ -3364,7 +3364,7 @@ static int novatd_frontend_attach(struct stk7070pd_dib7000p_config) != 0) { err("%s: state->dib7000p_ops.i2c_enumeration failed. Cannot continue\n", __func__); - dvb_detach(&state->dib7000p_ops); + dvb_detach(state->dib7000p_ops.set_wbd_ref); return -ENODEV; } } @@ -3600,7 +3600,7 @@ static int pctv340e_frontend_attach(stru if (state->dib7000p_ops.dib7000pc_detection(&adap->dev->i2c_adap) == 0) { /* Demodulator not found for some reason? */ - dvb_detach(&state->dib7000p_ops); + dvb_detach(state->dib7000p_ops.set_wbd_ref); return -ENODEV; } Patches currently in stable-queue which might be from andreyknvl(a)google.com are queue-4.4/media-imon-fix-null-ptr-deref-in-imon_probe.patch queue-4.4/net-qmi_wwan-fix-divide-by-0-on-bad-descriptors.patch queue-4.4/media-dib0700-fix-invalid-dvb_detach-argument.patch

7 years, 9 months

1
0
0 0

[Linux-stable-mirror] Patch "media: imon: Fix null-ptr-deref in imon_probe" has been added to the 4.4-stable tree

by gregkh＠linuxfoundation.org

This is a note to let you know that I've just added the patch titled media: imon: Fix null-ptr-deref in imon_probe to the 4.4-stable tree which can be found at: http://www.kernel.org/git/?p=linux/kernel/git/stable/stable-queue.git;a=sum… The filename of the patch is: media-imon-fix-null-ptr-deref-in-imon_probe.patch and it can be found in the queue-4.4 subdirectory. If you, or anyone else, feels it should not be added to the stable tree, please let <stable(a)vger.kernel.org> know about it. >From 58fd55e838276a0c13d1dc7c387f90f25063cbf3 Mon Sep 17 00:00:00 2001 From: Arvind Yadav <arvind.yadav.cs(a)gmail.com> Date: Mon, 9 Oct 2017 20:14:48 +0200 Subject: media: imon: Fix null-ptr-deref in imon_probe From: Arvind Yadav <arvind.yadav.cs(a)gmail.com> commit 58fd55e838276a0c13d1dc7c387f90f25063cbf3 upstream. It seems that the return value of usb_ifnum_to_if() can be NULL and needs to be checked. Signed-off-by: Arvind Yadav <arvind.yadav.cs(a)gmail.com> Tested-by: Andrey Konovalov <andreyknvl(a)google.com> Signed-off-by: Sean Young <sean(a)mess.org> Signed-off-by: Mauro Carvalho Chehab <mchehab(a)osg.samsung.com> Cc: Ben Hutchings <ben.hutchings(a)codethink.co.uk> Signed-off-by: Greg Kroah-Hartman <gregkh(a)linuxfoundation.org> --- drivers/media/rc/imon.c | 5 +++++ 1 file changed, 5 insertions(+) --- a/drivers/media/rc/imon.c +++ b/drivers/media/rc/imon.c @@ -2419,6 +2419,11 @@ static int imon_probe(struct usb_interfa mutex_lock(&driver_lock); first_if = usb_ifnum_to_if(usbdev, 0); + if (!first_if) { + ret = -ENODEV; + goto fail; + } + first_if_ctx = usb_get_intfdata(first_if); if (ifnum == 0) { Patches currently in stable-queue which might be from arvind.yadav.cs(a)gmail.com are queue-4.4/media-imon-fix-null-ptr-deref-in-imon_probe.patch

7 years, 9 months

1
0
0 0

[Linux-stable-mirror] Patch "KVM: x86: fix singlestepping over syscall" has been added to the 4.4-stable tree

by gregkh＠linuxfoundation.org

This is a note to let you know that I've just added the patch titled KVM: x86: fix singlestepping over syscall to the 4.4-stable tree which can be found at: http://www.kernel.org/git/?p=linux/kernel/git/stable/stable-queue.git;a=sum… The filename of the patch is: kvm-x86-fix-singlestepping-over-syscall.patch and it can be found in the queue-4.4 subdirectory. If you, or anyone else, feels it should not be added to the stable tree, please let <stable(a)vger.kernel.org> know about it. >From foo@baz Sun Nov 19 11:12:05 CET 2017 From: Paolo Bonzini <pbonzini(a)redhat.com> Date: Wed, 7 Jun 2017 15:13:14 +0200 Subject: KVM: x86: fix singlestepping over syscall From: Paolo Bonzini <pbonzini(a)redhat.com> commit c8401dda2f0a00cd25c0af6a95ed50e478d25de4 upstream. TF is handled a bit differently for syscall and sysret, compared to the other instructions: TF is checked after the instruction completes, so that the OS can disable #DB at a syscall by adding TF to FMASK. When the sysret is executed the #DB is taken "as if" the syscall insn just completed. KVM emulates syscall so that it can trap 32-bit syscall on Intel processors. Fix the behavior, otherwise you could get #DB on a user stack which is not nice. This does not affect Linux guests, as they use an IST or task gate for #DB. This fixes CVE-2017-7518. Reported-by: Andy Lutomirski <luto(a)kernel.org> Signed-off-by: Paolo Bonzini <pbonzini(a)redhat.com> Signed-off-by: Radim Krčmář <rkrcmar(a)redhat.com> [bwh: Backported to 4.4: - kvm_vcpu_check_singlestep() sets some flags differently - Drop changes to kvm_skip_emulated_instruction()] Signed-off-by: Ben Hutchings <ben.hutchings(a)codethink.co.uk> Signed-off-by: Greg Kroah-Hartman <gregkh(a)linuxfoundation.org> --- arch/x86/include/asm/kvm_emulate.h | 1 arch/x86/kvm/emulate.c | 1 arch/x86/kvm/x86.c | 52 +++++++++++++++---------------------- 3 files changed, 24 insertions(+), 30 deletions(-) --- a/arch/x86/include/asm/kvm_emulate.h +++ b/arch/x86/include/asm/kvm_emulate.h @@ -296,6 +296,7 @@ struct x86_emulate_ctxt { bool perm_ok; /* do not check permissions if true */ bool ud; /* inject an #UD if host doesn't support insn */ + bool tf; /* TF value before instruction (after for syscall/sysret) */ bool have_exception; struct x86_exception exception; --- a/arch/x86/kvm/emulate.c +++ b/arch/x86/kvm/emulate.c @@ -2726,6 +2726,7 @@ static int em_syscall(struct x86_emulate ctxt->eflags &= ~(X86_EFLAGS_VM | X86_EFLAGS_IF); } + ctxt->tf = (ctxt->eflags & X86_EFLAGS_TF) != 0; return X86EMUL_CONTINUE; } --- a/arch/x86/kvm/x86.c +++ b/arch/x86/kvm/x86.c @@ -5095,6 +5095,8 @@ static void init_emulate_ctxt(struct kvm kvm_x86_ops->get_cs_db_l_bits(vcpu, &cs_db, &cs_l); ctxt->eflags = kvm_get_rflags(vcpu); + ctxt->tf = (ctxt->eflags & X86_EFLAGS_TF) != 0; + ctxt->eip = kvm_rip_read(vcpu); ctxt->mode = (!is_protmode(vcpu)) ? X86EMUL_MODE_REAL : (ctxt->eflags & X86_EFLAGS_VM) ? X86EMUL_MODE_VM86 : @@ -5315,37 +5317,26 @@ static int kvm_vcpu_check_hw_bp(unsigned return dr6; } -static void kvm_vcpu_check_singlestep(struct kvm_vcpu *vcpu, unsigned long rflags, int *r) +static void kvm_vcpu_do_singlestep(struct kvm_vcpu *vcpu, int *r) { struct kvm_run *kvm_run = vcpu->run; - /* - * rflags is the old, "raw" value of the flags. The new value has - * not been saved yet. - * - * This is correct even for TF set by the guest, because "the - * processor will not generate this exception after the instruction - * that sets the TF flag". - */ - if (unlikely(rflags & X86_EFLAGS_TF)) { - if (vcpu->guest_debug & KVM_GUESTDBG_SINGLESTEP) { - kvm_run->debug.arch.dr6 = DR6_BS | DR6_FIXED_1 | - DR6_RTM; - kvm_run->debug.arch.pc = vcpu->arch.singlestep_rip; - kvm_run->debug.arch.exception = DB_VECTOR; - kvm_run->exit_reason = KVM_EXIT_DEBUG; - *r = EMULATE_USER_EXIT; - } else { - vcpu->arch.emulate_ctxt.eflags &= ~X86_EFLAGS_TF; - /* - * "Certain debug exceptions may clear bit 0-3. The - * remaining contents of the DR6 register are never - * cleared by the processor". - */ - vcpu->arch.dr6 &= ~15; - vcpu->arch.dr6 |= DR6_BS | DR6_RTM; - kvm_queue_exception(vcpu, DB_VECTOR); - } + if (vcpu->guest_debug & KVM_GUESTDBG_SINGLESTEP) { + kvm_run->debug.arch.dr6 = DR6_BS | DR6_FIXED_1 | DR6_RTM; + kvm_run->debug.arch.pc = vcpu->arch.singlestep_rip; + kvm_run->debug.arch.exception = DB_VECTOR; + kvm_run->exit_reason = KVM_EXIT_DEBUG; + *r = EMULATE_USER_EXIT; + } else { + vcpu->arch.emulate_ctxt.eflags &= ~X86_EFLAGS_TF; + /* + * "Certain debug exceptions may clear bit 0-3. The + * remaining contents of the DR6 register are never + * cleared by the processor". + */ + vcpu->arch.dr6 &= ~15; + vcpu->arch.dr6 |= DR6_BS | DR6_RTM; + kvm_queue_exception(vcpu, DB_VECTOR); } } @@ -5500,8 +5491,9 @@ restart: toggle_interruptibility(vcpu, ctxt->interruptibility); vcpu->arch.emulate_regs_need_sync_to_vcpu = false; kvm_rip_write(vcpu, ctxt->eip); - if (r == EMULATE_DONE) - kvm_vcpu_check_singlestep(vcpu, rflags, &r); + if (r == EMULATE_DONE && + (ctxt->tf || (vcpu->guest_debug & KVM_GUESTDBG_SINGLESTEP))) + kvm_vcpu_do_singlestep(vcpu, &r); if (!ctxt->have_exception || exception_type(ctxt->exception.vector) == EXCPT_TRAP) __kvm_set_rflags(vcpu, ctxt->eflags); Patches currently in stable-queue which might be from pbonzini(a)redhat.com are queue-4.4/kvm-x86-fix-singlestepping-over-syscall.patch

7 years, 9 months

1
0
0 0

[Linux-stable-mirror] Patch "ext4: fix data exposure after a crash" has been added to the 4.4-stable tree

by gregkh＠linuxfoundation.org

This is a note to let you know that I've just added the patch titled ext4: fix data exposure after a crash to the 4.4-stable tree which can be found at: http://www.kernel.org/git/?p=linux/kernel/git/stable/stable-queue.git;a=sum… The filename of the patch is: ext4-fix-data-exposure-after-a-crash.patch and it can be found in the queue-4.4 subdirectory. If you, or anyone else, feels it should not be added to the stable tree, please let <stable(a)vger.kernel.org> know about it. >From foo@baz Sun Nov 19 11:12:05 CET 2017 From: Jan Kara <jack(a)suse.cz> Date: Sun, 24 Apr 2016 00:56:03 -0400 Subject: ext4: fix data exposure after a crash From: Jan Kara <jack(a)suse.cz> commit 06bd3c36a733ac27962fea7d6f47168841376824 upstream. Huang has reported that in his powerfail testing he is seeing stale block contents in some of recently allocated blocks although he mounts ext4 in data=ordered mode. After some investigation I have found out that indeed when delayed allocation is used, we don't add inode to transaction's list of inodes needing flushing before commit. Originally we were doing that but commit f3b59291a69d removed the logic with a flawed argument that it is not needed. The problem is that although for delayed allocated blocks we write their contents immediately after allocating them, there is no guarantee that the IO scheduler or device doesn't reorder things and thus transaction allocating blocks and attaching them to inode can reach stable storage before actual block contents. Actually whenever we attach freshly allocated blocks to inode using a written extent, we should add inode to transaction's ordered inode list to make sure we properly wait for block contents to be written before committing the transaction. So that is what we do in this patch. This also handles other cases where stale data exposure was possible - like filling hole via mmap in data=ordered,nodelalloc mode. The only exception to the above rule are extending direct IO writes where blkdev_direct_IO() waits for IO to complete before increasing i_size and thus stale data exposure is not possible. For now we don't complicate the code with optimizing this special case since the overhead is pretty low. In case this is observed to be a performance problem we can always handle it using a special flag to ext4_map_blocks(). Fixes: f3b59291a69d0b734be1fc8be489fef2dd846d3d Reported-by: "HUANG Weller (CM/ESW12-CN)" <Weller.Huang(a)cn.bosch.com> Tested-by: "HUANG Weller (CM/ESW12-CN)" <Weller.Huang(a)cn.bosch.com> Signed-off-by: Jan Kara <jack(a)suse.cz> Signed-off-by: Theodore Ts'o <tytso(a)mit.edu> [bwh: Backported to 4.4: - Drop check for EXT4_GET_BLOCKS_ZERO flag - Adjust context] Signed-off-by: Ben Hutchings <ben.hutchings(a)codethink.co.uk> Signed-off-by: Greg Kroah-Hartman <gregkh(a)linuxfoundation.org> --- fs/ext4/inode.c | 23 ++++++++++++++--------- 1 file changed, 14 insertions(+), 9 deletions(-) --- a/fs/ext4/inode.c +++ b/fs/ext4/inode.c @@ -658,6 +658,20 @@ has_zeroout: ret = check_block_validity(inode, map); if (ret != 0) return ret; + + /* + * Inodes with freshly allocated blocks where contents will be + * visible after transaction commit must be on transaction's + * ordered data list. + */ + if (map->m_flags & EXT4_MAP_NEW && + !(map->m_flags & EXT4_MAP_UNWRITTEN) && + !IS_NOQUOTA(inode) && + ext4_should_order_data(inode)) { + ret = ext4_jbd2_file_inode(handle, inode); + if (ret) + return ret; + } } return retval; } @@ -1152,15 +1166,6 @@ static int ext4_write_end(struct file *f int i_size_changed = 0; trace_ext4_write_end(inode, pos, len, copied); - if (ext4_test_inode_state(inode, EXT4_STATE_ORDERED_MODE)) { - ret = ext4_jbd2_file_inode(handle, inode); - if (ret) { - unlock_page(page); - page_cache_release(page); - goto errout; - } - } - if (ext4_has_inline_data(inode)) { ret = ext4_write_inline_data_end(inode, pos, len, copied, page); Patches currently in stable-queue which might be from jack(a)suse.cz are queue-4.4/ext4-fix-data-exposure-after-a-crash.patch

7 years, 9 months

1
0
0 0

[Linux-stable-mirror] Patch "bpf: don't let ldimm64 leak map addresses on unprivileged" has been added to the 4.4-stable tree

by gregkh＠linuxfoundation.org

This is a note to let you know that I've just added the patch titled bpf: don't let ldimm64 leak map addresses on unprivileged to the 4.4-stable tree which can be found at: http://www.kernel.org/git/?p=linux/kernel/git/stable/stable-queue.git;a=sum… The filename of the patch is: bpf-don-t-let-ldimm64-leak-map-addresses-on-unprivileged.patch and it can be found in the queue-4.4 subdirectory. If you, or anyone else, feels it should not be added to the stable tree, please let <stable(a)vger.kernel.org> know about it. >From foo@baz Sun Nov 19 11:12:05 CET 2017 From: Daniel Borkmann <daniel(a)iogearbox.net> Date: Mon, 8 May 2017 00:04:09 +0200 Subject: bpf: don't let ldimm64 leak map addresses on unprivileged From: Daniel Borkmann <daniel(a)iogearbox.net> commit 0d0e57697f162da4aa218b5feafe614fb666db07 upstream. The patch fixes two things at once: 1) It checks the env->allow_ptr_leaks and only prints the map address to the log if we have the privileges to do so, otherwise it just dumps 0 as we would when kptr_restrict is enabled on %pK. Given the latter is off by default and not every distro sets it, I don't want to rely on this, hence the 0 by default for unprivileged. 2) Printing of ldimm64 in the verifier log is currently broken in that we don't print the full immediate, but only the 32 bit part of the first insn part for ldimm64. Thus, fix this up as well; it's okay to access, since we verified all ldimm64 earlier already (including just constants) through replace_map_fd_with_map_ptr(). Fixes: 1be7f75d1668 ("bpf: enable non-root eBPF programs") Fixes: cbd357008604 ("bpf: verifier (add ability to receive verification log)") Reported-by: Jann Horn <jannh(a)google.com> Signed-off-by: Daniel Borkmann <daniel(a)iogearbox.net> Acked-by: Alexei Starovoitov <ast(a)kernel.org> Signed-off-by: David S. Miller <davem(a)davemloft.net> [bwh: Backported to 4.4: s/bpf_verifier_env/verifier_env/] Signed-off-by: Ben Hutchings <ben.hutchings(a)codethink.co.uk> Signed-off-by: Greg Kroah-Hartman <gregkh(a)linuxfoundation.org> --- kernel/bpf/verifier.c | 21 ++++++++++++++++----- 1 file changed, 16 insertions(+), 5 deletions(-) --- a/kernel/bpf/verifier.c +++ b/kernel/bpf/verifier.c @@ -313,7 +313,8 @@ static const char *const bpf_jmp_string[ [BPF_EXIT >> 4] = "exit", }; -static void print_bpf_insn(struct bpf_insn *insn) +static void print_bpf_insn(const struct verifier_env *env, + const struct bpf_insn *insn) { u8 class = BPF_CLASS(insn->code); @@ -377,9 +378,19 @@ static void print_bpf_insn(struct bpf_in insn->code, bpf_ldst_string[BPF_SIZE(insn->code) >> 3], insn->src_reg, insn->imm); - } else if (BPF_MODE(insn->code) == BPF_IMM) { - verbose("(%02x) r%d = 0x%x\n", - insn->code, insn->dst_reg, insn->imm); + } else if (BPF_MODE(insn->code) == BPF_IMM && + BPF_SIZE(insn->code) == BPF_DW) { + /* At this point, we already made sure that the second + * part of the ldimm64 insn is accessible. + */ + u64 imm = ((u64)(insn + 1)->imm << 32) | (u32)insn->imm; + bool map_ptr = insn->src_reg == BPF_PSEUDO_MAP_FD; + + if (map_ptr && !env->allow_ptr_leaks) + imm = 0; + + verbose("(%02x) r%d = 0x%llx\n", insn->code, + insn->dst_reg, (unsigned long long)imm); } else { verbose("BUG_ld_%02x\n", insn->code); return; @@ -1764,7 +1775,7 @@ static int do_check(struct verifier_env if (log_level) { verbose("%d: ", insn_idx); - print_bpf_insn(insn); + print_bpf_insn(env, insn); } if (class == BPF_ALU || class == BPF_ALU64) { Patches currently in stable-queue which might be from daniel(a)iogearbox.net are queue-4.4/bpf-don-t-let-ldimm64-leak-map-addresses-on-unprivileged.patch

7 years, 9 months

1
0
0 0

[Linux-stable-mirror] Patch "media: imon: Fix null-ptr-deref in imon_probe" has been added to the 4.13-stable tree

by gregkh＠linuxfoundation.org

This is a note to let you know that I've just added the patch titled media: imon: Fix null-ptr-deref in imon_probe to the 4.13-stable tree which can be found at: http://www.kernel.org/git/?p=linux/kernel/git/stable/stable-queue.git;a=sum… The filename of the patch is: media-imon-fix-null-ptr-deref-in-imon_probe.patch and it can be found in the queue-4.13 subdirectory. If you, or anyone else, feels it should not be added to the stable tree, please let <stable(a)vger.kernel.org> know about it. >From 58fd55e838276a0c13d1dc7c387f90f25063cbf3 Mon Sep 17 00:00:00 2001 From: Arvind Yadav <arvind.yadav.cs(a)gmail.com> Date: Mon, 9 Oct 2017 20:14:48 +0200 Subject: media: imon: Fix null-ptr-deref in imon_probe From: Arvind Yadav <arvind.yadav.cs(a)gmail.com> commit 58fd55e838276a0c13d1dc7c387f90f25063cbf3 upstream. It seems that the return value of usb_ifnum_to_if() can be NULL and needs to be checked. Signed-off-by: Arvind Yadav <arvind.yadav.cs(a)gmail.com> Tested-by: Andrey Konovalov <andreyknvl(a)google.com> Signed-off-by: Sean Young <sean(a)mess.org> Signed-off-by: Mauro Carvalho Chehab <mchehab(a)osg.samsung.com> Cc: Ben Hutchings <ben.hutchings(a)codethink.co.uk> Signed-off-by: Greg Kroah-Hartman <gregkh(a)linuxfoundation.org> --- drivers/media/rc/imon.c | 5 +++++ 1 file changed, 5 insertions(+) --- a/drivers/media/rc/imon.c +++ b/drivers/media/rc/imon.c @@ -2516,6 +2516,11 @@ static int imon_probe(struct usb_interfa mutex_lock(&driver_lock); first_if = usb_ifnum_to_if(usbdev, 0); + if (!first_if) { + ret = -ENODEV; + goto fail; + } + first_if_ctx = usb_get_intfdata(first_if); if (ifnum == 0) { Patches currently in stable-queue which might be from arvind.yadav.cs(a)gmail.com are queue-4.13/media-imon-fix-null-ptr-deref-in-imon_probe.patch

7 years, 9 months

1
0
0 0

[Linux-stable-mirror] Patch "media: dib0700: fix invalid dvb_detach argument" has been added to the 4.13-stable tree

by gregkh＠linuxfoundation.org

This is a note to let you know that I've just added the patch titled media: dib0700: fix invalid dvb_detach argument to the 4.13-stable tree which can be found at: http://www.kernel.org/git/?p=linux/kernel/git/stable/stable-queue.git;a=sum… The filename of the patch is: media-dib0700-fix-invalid-dvb_detach-argument.patch and it can be found in the queue-4.13 subdirectory. If you, or anyone else, feels it should not be added to the stable tree, please let <stable(a)vger.kernel.org> know about it. >From eb0c19942288569e0ae492476534d5a485fb8ab4 Mon Sep 17 00:00:00 2001 From: Andrey Konovalov <andreyknvl(a)google.com> Date: Thu, 2 Nov 2017 10:38:21 -0400 Subject: media: dib0700: fix invalid dvb_detach argument From: Andrey Konovalov <andreyknvl(a)google.com> commit eb0c19942288569e0ae492476534d5a485fb8ab4 upstream. dvb_detach(arg) calls symbol_put_addr(arg), where arg should be a pointer to a function. Right now a pointer to state->dib7000p_ops is passed to dvb_detach(), which causes a BUG() in symbol_put_addr() as discovered by syzkaller. Pass state->dib7000p_ops.set_wbd_ref instead. ------------[ cut here ]------------ kernel BUG at kernel/module.c:1081! invalid opcode: 0000 [#1] PREEMPT SMP KASAN Modules linked in: CPU: 1 PID: 1151 Comm: kworker/1:1 Tainted: G W 4.14.0-rc1-42251-gebb2c2437d80 #224 Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS Bochs 01/01/2011 Workqueue: usb_hub_wq hub_event task: ffff88006a336300 task.stack: ffff88006a7c8000 RIP: 0010:symbol_put_addr+0x54/0x60 kernel/module.c:1083 RSP: 0018:ffff88006a7ce210 EFLAGS: 00010246 RAX: 0000000000000000 RBX: ffff880062a8d190 RCX: 0000000000000000 RDX: dffffc0000000020 RSI: ffffffff85876d60 RDI: ffff880062a8d190 RBP: ffff88006a7ce218 R08: 1ffff1000d4f9c12 R09: 1ffff1000d4f9ae4 R10: 1ffff1000d4f9bed R11: 0000000000000000 R12: ffff880062a8d180 R13: 00000000ffffffed R14: ffff880062a8d190 R15: ffff88006947c000 FS: 0000000000000000(0000) GS:ffff88006c900000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 00007f6416532000 CR3: 00000000632f5000 CR4: 00000000000006e0 Call Trace: stk7070p_frontend_attach+0x515/0x610 drivers/media/usb/dvb-usb/dib0700_devices.c:1013 dvb_usb_adapter_frontend_init+0x32b/0x660 drivers/media/usb/dvb-usb/dvb-usb-dvb.c:286 dvb_usb_adapter_init drivers/media/usb/dvb-usb/dvb-usb-init.c:86 dvb_usb_init drivers/media/usb/dvb-usb/dvb-usb-init.c:162 dvb_usb_device_init+0xf70/0x17f0 drivers/media/usb/dvb-usb/dvb-usb-init.c:277 dib0700_probe+0x171/0x5a0 drivers/media/usb/dvb-usb/dib0700_core.c:886 usb_probe_interface+0x35d/0x8e0 drivers/usb/core/driver.c:361 really_probe drivers/base/dd.c:413 driver_probe_device+0x610/0xa00 drivers/base/dd.c:557 __device_attach_driver+0x230/0x290 drivers/base/dd.c:653 bus_for_each_drv+0x161/0x210 drivers/base/bus.c:463 __device_attach+0x26e/0x3d0 drivers/base/dd.c:710 device_initial_probe+0x1f/0x30 drivers/base/dd.c:757 bus_probe_device+0x1eb/0x290 drivers/base/bus.c:523 device_add+0xd0b/0x1660 drivers/base/core.c:1835 usb_set_configuration+0x104e/0x1870 drivers/usb/core/message.c:1932 generic_probe+0x73/0xe0 drivers/usb/core/generic.c:174 usb_probe_device+0xaf/0xe0 drivers/usb/core/driver.c:266 really_probe drivers/base/dd.c:413 driver_probe_device+0x610/0xa00 drivers/base/dd.c:557 __device_attach_driver+0x230/0x290 drivers/base/dd.c:653 bus_for_each_drv+0x161/0x210 drivers/base/bus.c:463 __device_attach+0x26e/0x3d0 drivers/base/dd.c:710 device_initial_probe+0x1f/0x30 drivers/base/dd.c:757 bus_probe_device+0x1eb/0x290 drivers/base/bus.c:523 device_add+0xd0b/0x1660 drivers/base/core.c:1835 usb_new_device+0x7b8/0x1020 drivers/usb/core/hub.c:2457 hub_port_connect drivers/usb/core/hub.c:4903 hub_port_connect_change drivers/usb/core/hub.c:5009 port_event drivers/usb/core/hub.c:5115 hub_event+0x194d/0x3740 drivers/usb/core/hub.c:5195 process_one_work+0xc7f/0x1db0 kernel/workqueue.c:2119 worker_thread+0x221/0x1850 kernel/workqueue.c:2253 kthread+0x3a1/0x470 kernel/kthread.c:231 ret_from_fork+0x2a/0x40 arch/x86/entry/entry_64.S:431 Code: ff ff 48 85 c0 74 24 48 89 c7 e8 48 ea ff ff bf 01 00 00 00 e8 de 20 e3 ff 65 8b 05 b7 2f c2 7e 85 c0 75 c9 e8 f9 0b c1 ff eb c2 <0f> 0b 66 2e 0f 1f 84 00 00 00 00 00 0f 1f 44 00 00 48 b8 00 00 RIP: symbol_put_addr+0x54/0x60 RSP: ffff88006a7ce210 ---[ end trace b75b357739e7e116 ]--- Signed-off-by: Andrey Konovalov <andreyknvl(a)google.com> Cc: Ben Hutchings <ben.hutchings(a)codethink.co.uk> Signed-off-by: Mauro Carvalho Chehab <mchehab(a)s-opensource.com> Signed-off-by: Greg Kroah-Hartman <gregkh(a)linuxfoundation.org> --- drivers/media/usb/dvb-usb/dib0700_devices.c | 24 ++++++++++++------------ 1 file changed, 12 insertions(+), 12 deletions(-) --- a/drivers/media/usb/dvb-usb/dib0700_devices.c +++ b/drivers/media/usb/dvb-usb/dib0700_devices.c @@ -291,7 +291,7 @@ static int stk7700P2_frontend_attach(str stk7700d_dib7000p_mt2266_config) != 0) { err("%s: state->dib7000p_ops.i2c_enumeration failed. Cannot continue\n", __func__); - dvb_detach(&state->dib7000p_ops); + dvb_detach(state->dib7000p_ops.set_wbd_ref); return -ENODEV; } } @@ -325,7 +325,7 @@ static int stk7700d_frontend_attach(stru stk7700d_dib7000p_mt2266_config) != 0) { err("%s: state->dib7000p_ops.i2c_enumeration failed. Cannot continue\n", __func__); - dvb_detach(&state->dib7000p_ops); + dvb_detach(state->dib7000p_ops.set_wbd_ref); return -ENODEV; } } @@ -478,7 +478,7 @@ static int stk7700ph_frontend_attach(str &stk7700ph_dib7700_xc3028_config) != 0) { err("%s: state->dib7000p_ops.i2c_enumeration failed. Cannot continue\n", __func__); - dvb_detach(&state->dib7000p_ops); + dvb_detach(state->dib7000p_ops.set_wbd_ref); return -ENODEV; } @@ -1010,7 +1010,7 @@ static int stk7070p_frontend_attach(stru &dib7070p_dib7000p_config) != 0) { err("%s: state->dib7000p_ops.i2c_enumeration failed. Cannot continue\n", __func__); - dvb_detach(&state->dib7000p_ops); + dvb_detach(state->dib7000p_ops.set_wbd_ref); return -ENODEV; } @@ -1068,7 +1068,7 @@ static int stk7770p_frontend_attach(stru &dib7770p_dib7000p_config) != 0) { err("%s: state->dib7000p_ops.i2c_enumeration failed. Cannot continue\n", __func__); - dvb_detach(&state->dib7000p_ops); + dvb_detach(state->dib7000p_ops.set_wbd_ref); return -ENODEV; } @@ -3056,7 +3056,7 @@ static int nim7090_frontend_attach(struc if (state->dib7000p_ops.i2c_enumeration(&adap->dev->i2c_adap, 1, 0x10, &nim7090_dib7000p_config) != 0) { err("%s: state->dib7000p_ops.i2c_enumeration failed. Cannot continue\n", __func__); - dvb_detach(&state->dib7000p_ops); + dvb_detach(state->dib7000p_ops.set_wbd_ref); return -ENODEV; } adap->fe_adap[0].fe = state->dib7000p_ops.init(&adap->dev->i2c_adap, 0x80, &nim7090_dib7000p_config); @@ -3109,7 +3109,7 @@ static int tfe7090pvr_frontend0_attach(s /* initialize IC 0 */ if (state->dib7000p_ops.i2c_enumeration(&adap->dev->i2c_adap, 1, 0x20, &tfe7090pvr_dib7000p_config[0]) != 0) { err("%s: state->dib7000p_ops.i2c_enumeration failed. Cannot continue\n", __func__); - dvb_detach(&state->dib7000p_ops); + dvb_detach(state->dib7000p_ops.set_wbd_ref); return -ENODEV; } @@ -3139,7 +3139,7 @@ static int tfe7090pvr_frontend1_attach(s i2c = state->dib7000p_ops.get_i2c_master(adap->dev->adapter[0].fe_adap[0].fe, DIBX000_I2C_INTERFACE_GPIO_6_7, 1); if (state->dib7000p_ops.i2c_enumeration(i2c, 1, 0x10, &tfe7090pvr_dib7000p_config[1]) != 0) { err("%s: state->dib7000p_ops.i2c_enumeration failed. Cannot continue\n", __func__); - dvb_detach(&state->dib7000p_ops); + dvb_detach(state->dib7000p_ops.set_wbd_ref); return -ENODEV; } @@ -3214,7 +3214,7 @@ static int tfe7790p_frontend_attach(stru 1, 0x10, &tfe7790p_dib7000p_config) != 0) { err("%s: state->dib7000p_ops.i2c_enumeration failed. Cannot continue\n", __func__); - dvb_detach(&state->dib7000p_ops); + dvb_detach(state->dib7000p_ops.set_wbd_ref); return -ENODEV; } adap->fe_adap[0].fe = state->dib7000p_ops.init(&adap->dev->i2c_adap, @@ -3309,7 +3309,7 @@ static int stk7070pd_frontend_attach0(st stk7070pd_dib7000p_config) != 0) { err("%s: state->dib7000p_ops.i2c_enumeration failed. Cannot continue\n", __func__); - dvb_detach(&state->dib7000p_ops); + dvb_detach(state->dib7000p_ops.set_wbd_ref); return -ENODEV; } @@ -3384,7 +3384,7 @@ static int novatd_frontend_attach(struct stk7070pd_dib7000p_config) != 0) { err("%s: state->dib7000p_ops.i2c_enumeration failed. Cannot continue\n", __func__); - dvb_detach(&state->dib7000p_ops); + dvb_detach(state->dib7000p_ops.set_wbd_ref); return -ENODEV; } } @@ -3620,7 +3620,7 @@ static int pctv340e_frontend_attach(stru if (state->dib7000p_ops.dib7000pc_detection(&adap->dev->i2c_adap) == 0) { /* Demodulator not found for some reason? */ - dvb_detach(&state->dib7000p_ops); + dvb_detach(state->dib7000p_ops.set_wbd_ref); return -ENODEV; } Patches currently in stable-queue which might be from andreyknvl(a)google.com are queue-4.13/media-imon-fix-null-ptr-deref-in-imon_probe.patch queue-4.13/media-dib0700-fix-invalid-dvb_detach-argument.patch

7 years, 9 months

1
0
0 0

[Linux-stable-mirror] Patch "media: imon: Fix null-ptr-deref in imon_probe" has been added to the 4.9-stable tree

by gregkh＠linuxfoundation.org

This is a note to let you know that I've just added the patch titled media: imon: Fix null-ptr-deref in imon_probe to the 4.9-stable tree which can be found at: http://www.kernel.org/git/?p=linux/kernel/git/stable/stable-queue.git;a=sum… The filename of the patch is: media-imon-fix-null-ptr-deref-in-imon_probe.patch and it can be found in the queue-4.9 subdirectory. If you, or anyone else, feels it should not be added to the stable tree, please let <stable(a)vger.kernel.org> know about it. >From 58fd55e838276a0c13d1dc7c387f90f25063cbf3 Mon Sep 17 00:00:00 2001 From: Arvind Yadav <arvind.yadav.cs(a)gmail.com> Date: Mon, 9 Oct 2017 20:14:48 +0200 Subject: media: imon: Fix null-ptr-deref in imon_probe From: Arvind Yadav <arvind.yadav.cs(a)gmail.com> commit 58fd55e838276a0c13d1dc7c387f90f25063cbf3 upstream. It seems that the return value of usb_ifnum_to_if() can be NULL and needs to be checked. Signed-off-by: Arvind Yadav <arvind.yadav.cs(a)gmail.com> Tested-by: Andrey Konovalov <andreyknvl(a)google.com> Signed-off-by: Sean Young <sean(a)mess.org> Signed-off-by: Mauro Carvalho Chehab <mchehab(a)osg.samsung.com> Cc: Ben Hutchings <ben.hutchings(a)codethink.co.uk> Signed-off-by: Greg Kroah-Hartman <gregkh(a)linuxfoundation.org> --- drivers/media/rc/imon.c | 5 +++++ 1 file changed, 5 insertions(+) --- a/drivers/media/rc/imon.c +++ b/drivers/media/rc/imon.c @@ -2412,6 +2412,11 @@ static int imon_probe(struct usb_interfa mutex_lock(&driver_lock); first_if = usb_ifnum_to_if(usbdev, 0); + if (!first_if) { + ret = -ENODEV; + goto fail; + } + first_if_ctx = usb_get_intfdata(first_if); if (ifnum == 0) { Patches currently in stable-queue which might be from arvind.yadav.cs(a)gmail.com are queue-4.9/media-imon-fix-null-ptr-deref-in-imon_probe.patch

7 years, 9 months

1
0
0 0

[Linux-stable-mirror] Patch "media: dib0700: fix invalid dvb_detach argument" has been added to the 4.9-stable tree

by gregkh＠linuxfoundation.org

This is a note to let you know that I've just added the patch titled media: dib0700: fix invalid dvb_detach argument to the 4.9-stable tree which can be found at: http://www.kernel.org/git/?p=linux/kernel/git/stable/stable-queue.git;a=sum… The filename of the patch is: media-dib0700-fix-invalid-dvb_detach-argument.patch and it can be found in the queue-4.9 subdirectory. If you, or anyone else, feels it should not be added to the stable tree, please let <stable(a)vger.kernel.org> know about it. >From eb0c19942288569e0ae492476534d5a485fb8ab4 Mon Sep 17 00:00:00 2001 From: Andrey Konovalov <andreyknvl(a)google.com> Date: Thu, 2 Nov 2017 10:38:21 -0400 Subject: media: dib0700: fix invalid dvb_detach argument From: Andrey Konovalov <andreyknvl(a)google.com> commit eb0c19942288569e0ae492476534d5a485fb8ab4 upstream. dvb_detach(arg) calls symbol_put_addr(arg), where arg should be a pointer to a function. Right now a pointer to state->dib7000p_ops is passed to dvb_detach(), which causes a BUG() in symbol_put_addr() as discovered by syzkaller. Pass state->dib7000p_ops.set_wbd_ref instead. ------------[ cut here ]------------ kernel BUG at kernel/module.c:1081! invalid opcode: 0000 [#1] PREEMPT SMP KASAN Modules linked in: CPU: 1 PID: 1151 Comm: kworker/1:1 Tainted: G W 4.14.0-rc1-42251-gebb2c2437d80 #224 Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS Bochs 01/01/2011 Workqueue: usb_hub_wq hub_event task: ffff88006a336300 task.stack: ffff88006a7c8000 RIP: 0010:symbol_put_addr+0x54/0x60 kernel/module.c:1083 RSP: 0018:ffff88006a7ce210 EFLAGS: 00010246 RAX: 0000000000000000 RBX: ffff880062a8d190 RCX: 0000000000000000 RDX: dffffc0000000020 RSI: ffffffff85876d60 RDI: ffff880062a8d190 RBP: ffff88006a7ce218 R08: 1ffff1000d4f9c12 R09: 1ffff1000d4f9ae4 R10: 1ffff1000d4f9bed R11: 0000000000000000 R12: ffff880062a8d180 R13: 00000000ffffffed R14: ffff880062a8d190 R15: ffff88006947c000 FS: 0000000000000000(0000) GS:ffff88006c900000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 00007f6416532000 CR3: 00000000632f5000 CR4: 00000000000006e0 Call Trace: stk7070p_frontend_attach+0x515/0x610 drivers/media/usb/dvb-usb/dib0700_devices.c:1013 dvb_usb_adapter_frontend_init+0x32b/0x660 drivers/media/usb/dvb-usb/dvb-usb-dvb.c:286 dvb_usb_adapter_init drivers/media/usb/dvb-usb/dvb-usb-init.c:86 dvb_usb_init drivers/media/usb/dvb-usb/dvb-usb-init.c:162 dvb_usb_device_init+0xf70/0x17f0 drivers/media/usb/dvb-usb/dvb-usb-init.c:277 dib0700_probe+0x171/0x5a0 drivers/media/usb/dvb-usb/dib0700_core.c:886 usb_probe_interface+0x35d/0x8e0 drivers/usb/core/driver.c:361 really_probe drivers/base/dd.c:413 driver_probe_device+0x610/0xa00 drivers/base/dd.c:557 __device_attach_driver+0x230/0x290 drivers/base/dd.c:653 bus_for_each_drv+0x161/0x210 drivers/base/bus.c:463 __device_attach+0x26e/0x3d0 drivers/base/dd.c:710 device_initial_probe+0x1f/0x30 drivers/base/dd.c:757 bus_probe_device+0x1eb/0x290 drivers/base/bus.c:523 device_add+0xd0b/0x1660 drivers/base/core.c:1835 usb_set_configuration+0x104e/0x1870 drivers/usb/core/message.c:1932 generic_probe+0x73/0xe0 drivers/usb/core/generic.c:174 usb_probe_device+0xaf/0xe0 drivers/usb/core/driver.c:266 really_probe drivers/base/dd.c:413 driver_probe_device+0x610/0xa00 drivers/base/dd.c:557 __device_attach_driver+0x230/0x290 drivers/base/dd.c:653 bus_for_each_drv+0x161/0x210 drivers/base/bus.c:463 __device_attach+0x26e/0x3d0 drivers/base/dd.c:710 device_initial_probe+0x1f/0x30 drivers/base/dd.c:757 bus_probe_device+0x1eb/0x290 drivers/base/bus.c:523 device_add+0xd0b/0x1660 drivers/base/core.c:1835 usb_new_device+0x7b8/0x1020 drivers/usb/core/hub.c:2457 hub_port_connect drivers/usb/core/hub.c:4903 hub_port_connect_change drivers/usb/core/hub.c:5009 port_event drivers/usb/core/hub.c:5115 hub_event+0x194d/0x3740 drivers/usb/core/hub.c:5195 process_one_work+0xc7f/0x1db0 kernel/workqueue.c:2119 worker_thread+0x221/0x1850 kernel/workqueue.c:2253 kthread+0x3a1/0x470 kernel/kthread.c:231 ret_from_fork+0x2a/0x40 arch/x86/entry/entry_64.S:431 Code: ff ff 48 85 c0 74 24 48 89 c7 e8 48 ea ff ff bf 01 00 00 00 e8 de 20 e3 ff 65 8b 05 b7 2f c2 7e 85 c0 75 c9 e8 f9 0b c1 ff eb c2 <0f> 0b 66 2e 0f 1f 84 00 00 00 00 00 0f 1f 44 00 00 48 b8 00 00 RIP: symbol_put_addr+0x54/0x60 RSP: ffff88006a7ce210 ---[ end trace b75b357739e7e116 ]--- Signed-off-by: Andrey Konovalov <andreyknvl(a)google.com> Cc: Ben Hutchings <ben.hutchings(a)codethink.co.uk> Signed-off-by: Mauro Carvalho Chehab <mchehab(a)s-opensource.com> Signed-off-by: Greg Kroah-Hartman <gregkh(a)linuxfoundation.org> --- drivers/media/usb/dvb-usb/dib0700_devices.c | 24 ++++++++++++------------ 1 file changed, 12 insertions(+), 12 deletions(-) --- a/drivers/media/usb/dvb-usb/dib0700_devices.c +++ b/drivers/media/usb/dvb-usb/dib0700_devices.c @@ -292,7 +292,7 @@ static int stk7700P2_frontend_attach(str stk7700d_dib7000p_mt2266_config) != 0) { err("%s: state->dib7000p_ops.i2c_enumeration failed. Cannot continue\n", __func__); - dvb_detach(&state->dib7000p_ops); + dvb_detach(state->dib7000p_ops.set_wbd_ref); return -ENODEV; } } @@ -326,7 +326,7 @@ static int stk7700d_frontend_attach(stru stk7700d_dib7000p_mt2266_config) != 0) { err("%s: state->dib7000p_ops.i2c_enumeration failed. Cannot continue\n", __func__); - dvb_detach(&state->dib7000p_ops); + dvb_detach(state->dib7000p_ops.set_wbd_ref); return -ENODEV; } } @@ -479,7 +479,7 @@ static int stk7700ph_frontend_attach(str &stk7700ph_dib7700_xc3028_config) != 0) { err("%s: state->dib7000p_ops.i2c_enumeration failed. Cannot continue\n", __func__); - dvb_detach(&state->dib7000p_ops); + dvb_detach(state->dib7000p_ops.set_wbd_ref); return -ENODEV; } @@ -1011,7 +1011,7 @@ static int stk7070p_frontend_attach(stru &dib7070p_dib7000p_config) != 0) { err("%s: state->dib7000p_ops.i2c_enumeration failed. Cannot continue\n", __func__); - dvb_detach(&state->dib7000p_ops); + dvb_detach(state->dib7000p_ops.set_wbd_ref); return -ENODEV; } @@ -1069,7 +1069,7 @@ static int stk7770p_frontend_attach(stru &dib7770p_dib7000p_config) != 0) { err("%s: state->dib7000p_ops.i2c_enumeration failed. Cannot continue\n", __func__); - dvb_detach(&state->dib7000p_ops); + dvb_detach(state->dib7000p_ops.set_wbd_ref); return -ENODEV; } @@ -3056,7 +3056,7 @@ static int nim7090_frontend_attach(struc if (state->dib7000p_ops.i2c_enumeration(&adap->dev->i2c_adap, 1, 0x10, &nim7090_dib7000p_config) != 0) { err("%s: state->dib7000p_ops.i2c_enumeration failed. Cannot continue\n", __func__); - dvb_detach(&state->dib7000p_ops); + dvb_detach(state->dib7000p_ops.set_wbd_ref); return -ENODEV; } adap->fe_adap[0].fe = state->dib7000p_ops.init(&adap->dev->i2c_adap, 0x80, &nim7090_dib7000p_config); @@ -3109,7 +3109,7 @@ static int tfe7090pvr_frontend0_attach(s /* initialize IC 0 */ if (state->dib7000p_ops.i2c_enumeration(&adap->dev->i2c_adap, 1, 0x20, &tfe7090pvr_dib7000p_config[0]) != 0) { err("%s: state->dib7000p_ops.i2c_enumeration failed. Cannot continue\n", __func__); - dvb_detach(&state->dib7000p_ops); + dvb_detach(state->dib7000p_ops.set_wbd_ref); return -ENODEV; } @@ -3139,7 +3139,7 @@ static int tfe7090pvr_frontend1_attach(s i2c = state->dib7000p_ops.get_i2c_master(adap->dev->adapter[0].fe_adap[0].fe, DIBX000_I2C_INTERFACE_GPIO_6_7, 1); if (state->dib7000p_ops.i2c_enumeration(i2c, 1, 0x10, &tfe7090pvr_dib7000p_config[1]) != 0) { err("%s: state->dib7000p_ops.i2c_enumeration failed. Cannot continue\n", __func__); - dvb_detach(&state->dib7000p_ops); + dvb_detach(state->dib7000p_ops.set_wbd_ref); return -ENODEV; } @@ -3214,7 +3214,7 @@ static int tfe7790p_frontend_attach(stru 1, 0x10, &tfe7790p_dib7000p_config) != 0) { err("%s: state->dib7000p_ops.i2c_enumeration failed. Cannot continue\n", __func__); - dvb_detach(&state->dib7000p_ops); + dvb_detach(state->dib7000p_ops.set_wbd_ref); return -ENODEV; } adap->fe_adap[0].fe = state->dib7000p_ops.init(&adap->dev->i2c_adap, @@ -3309,7 +3309,7 @@ static int stk7070pd_frontend_attach0(st stk7070pd_dib7000p_config) != 0) { err("%s: state->dib7000p_ops.i2c_enumeration failed. Cannot continue\n", __func__); - dvb_detach(&state->dib7000p_ops); + dvb_detach(state->dib7000p_ops.set_wbd_ref); return -ENODEV; } @@ -3384,7 +3384,7 @@ static int novatd_frontend_attach(struct stk7070pd_dib7000p_config) != 0) { err("%s: state->dib7000p_ops.i2c_enumeration failed. Cannot continue\n", __func__); - dvb_detach(&state->dib7000p_ops); + dvb_detach(state->dib7000p_ops.set_wbd_ref); return -ENODEV; } } @@ -3620,7 +3620,7 @@ static int pctv340e_frontend_attach(stru if (state->dib7000p_ops.dib7000pc_detection(&adap->dev->i2c_adap) == 0) { /* Demodulator not found for some reason? */ - dvb_detach(&state->dib7000p_ops); + dvb_detach(state->dib7000p_ops.set_wbd_ref); return -ENODEV; } Patches currently in stable-queue which might be from andreyknvl(a)google.com are queue-4.9/media-imon-fix-null-ptr-deref-in-imon_probe.patch queue-4.9/media-dib0700-fix-invalid-dvb_detach-argument.patch

7 years, 9 months

1
0
0 0

[Linux-stable-mirror] Patch "media: dib0700: fix invalid dvb_detach argument" has been added to the 3.18-stable tree

by gregkh＠linuxfoundation.org

This is a note to let you know that I've just added the patch titled media: dib0700: fix invalid dvb_detach argument to the 3.18-stable tree which can be found at: http://www.kernel.org/git/?p=linux/kernel/git/stable/stable-queue.git;a=sum… The filename of the patch is: media-dib0700-fix-invalid-dvb_detach-argument.patch and it can be found in the queue-3.18 subdirectory. If you, or anyone else, feels it should not be added to the stable tree, please let <stable(a)vger.kernel.org> know about it. >From eb0c19942288569e0ae492476534d5a485fb8ab4 Mon Sep 17 00:00:00 2001 From: Andrey Konovalov <andreyknvl(a)google.com> Date: Thu, 2 Nov 2017 10:38:21 -0400 Subject: media: dib0700: fix invalid dvb_detach argument From: Andrey Konovalov <andreyknvl(a)google.com> commit eb0c19942288569e0ae492476534d5a485fb8ab4 upstream. dvb_detach(arg) calls symbol_put_addr(arg), where arg should be a pointer to a function. Right now a pointer to state->dib7000p_ops is passed to dvb_detach(), which causes a BUG() in symbol_put_addr() as discovered by syzkaller. Pass state->dib7000p_ops.set_wbd_ref instead. ------------[ cut here ]------------ kernel BUG at kernel/module.c:1081! invalid opcode: 0000 [#1] PREEMPT SMP KASAN Modules linked in: CPU: 1 PID: 1151 Comm: kworker/1:1 Tainted: G W 4.14.0-rc1-42251-gebb2c2437d80 #224 Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS Bochs 01/01/2011 Workqueue: usb_hub_wq hub_event task: ffff88006a336300 task.stack: ffff88006a7c8000 RIP: 0010:symbol_put_addr+0x54/0x60 kernel/module.c:1083 RSP: 0018:ffff88006a7ce210 EFLAGS: 00010246 RAX: 0000000000000000 RBX: ffff880062a8d190 RCX: 0000000000000000 RDX: dffffc0000000020 RSI: ffffffff85876d60 RDI: ffff880062a8d190 RBP: ffff88006a7ce218 R08: 1ffff1000d4f9c12 R09: 1ffff1000d4f9ae4 R10: 1ffff1000d4f9bed R11: 0000000000000000 R12: ffff880062a8d180 R13: 00000000ffffffed R14: ffff880062a8d190 R15: ffff88006947c000 FS: 0000000000000000(0000) GS:ffff88006c900000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 00007f6416532000 CR3: 00000000632f5000 CR4: 00000000000006e0 Call Trace: stk7070p_frontend_attach+0x515/0x610 drivers/media/usb/dvb-usb/dib0700_devices.c:1013 dvb_usb_adapter_frontend_init+0x32b/0x660 drivers/media/usb/dvb-usb/dvb-usb-dvb.c:286 dvb_usb_adapter_init drivers/media/usb/dvb-usb/dvb-usb-init.c:86 dvb_usb_init drivers/media/usb/dvb-usb/dvb-usb-init.c:162 dvb_usb_device_init+0xf70/0x17f0 drivers/media/usb/dvb-usb/dvb-usb-init.c:277 dib0700_probe+0x171/0x5a0 drivers/media/usb/dvb-usb/dib0700_core.c:886 usb_probe_interface+0x35d/0x8e0 drivers/usb/core/driver.c:361 really_probe drivers/base/dd.c:413 driver_probe_device+0x610/0xa00 drivers/base/dd.c:557 __device_attach_driver+0x230/0x290 drivers/base/dd.c:653 bus_for_each_drv+0x161/0x210 drivers/base/bus.c:463 __device_attach+0x26e/0x3d0 drivers/base/dd.c:710 device_initial_probe+0x1f/0x30 drivers/base/dd.c:757 bus_probe_device+0x1eb/0x290 drivers/base/bus.c:523 device_add+0xd0b/0x1660 drivers/base/core.c:1835 usb_set_configuration+0x104e/0x1870 drivers/usb/core/message.c:1932 generic_probe+0x73/0xe0 drivers/usb/core/generic.c:174 usb_probe_device+0xaf/0xe0 drivers/usb/core/driver.c:266 really_probe drivers/base/dd.c:413 driver_probe_device+0x610/0xa00 drivers/base/dd.c:557 __device_attach_driver+0x230/0x290 drivers/base/dd.c:653 bus_for_each_drv+0x161/0x210 drivers/base/bus.c:463 __device_attach+0x26e/0x3d0 drivers/base/dd.c:710 device_initial_probe+0x1f/0x30 drivers/base/dd.c:757 bus_probe_device+0x1eb/0x290 drivers/base/bus.c:523 device_add+0xd0b/0x1660 drivers/base/core.c:1835 usb_new_device+0x7b8/0x1020 drivers/usb/core/hub.c:2457 hub_port_connect drivers/usb/core/hub.c:4903 hub_port_connect_change drivers/usb/core/hub.c:5009 port_event drivers/usb/core/hub.c:5115 hub_event+0x194d/0x3740 drivers/usb/core/hub.c:5195 process_one_work+0xc7f/0x1db0 kernel/workqueue.c:2119 worker_thread+0x221/0x1850 kernel/workqueue.c:2253 kthread+0x3a1/0x470 kernel/kthread.c:231 ret_from_fork+0x2a/0x40 arch/x86/entry/entry_64.S:431 Code: ff ff 48 85 c0 74 24 48 89 c7 e8 48 ea ff ff bf 01 00 00 00 e8 de 20 e3 ff 65 8b 05 b7 2f c2 7e 85 c0 75 c9 e8 f9 0b c1 ff eb c2 <0f> 0b 66 2e 0f 1f 84 00 00 00 00 00 0f 1f 44 00 00 48 b8 00 00 RIP: symbol_put_addr+0x54/0x60 RSP: ffff88006a7ce210 ---[ end trace b75b357739e7e116 ]--- Signed-off-by: Andrey Konovalov <andreyknvl(a)google.com> Cc: Ben Hutchings <ben.hutchings(a)codethink.co.uk> Signed-off-by: Mauro Carvalho Chehab <mchehab(a)s-opensource.com> Signed-off-by: Greg Kroah-Hartman <gregkh(a)linuxfoundation.org> --- drivers/media/usb/dvb-usb/dib0700_devices.c | 24 ++++++++++++------------ 1 file changed, 12 insertions(+), 12 deletions(-) --- a/drivers/media/usb/dvb-usb/dib0700_devices.c +++ b/drivers/media/usb/dvb-usb/dib0700_devices.c @@ -292,7 +292,7 @@ static int stk7700P2_frontend_attach(str stk7700d_dib7000p_mt2266_config) != 0) { err("%s: state->dib7000p_ops.i2c_enumeration failed. Cannot continue\n", __func__); - dvb_detach(&state->dib7000p_ops); + dvb_detach(state->dib7000p_ops.set_wbd_ref); return -ENODEV; } } @@ -326,7 +326,7 @@ static int stk7700d_frontend_attach(stru stk7700d_dib7000p_mt2266_config) != 0) { err("%s: state->dib7000p_ops.i2c_enumeration failed. Cannot continue\n", __func__); - dvb_detach(&state->dib7000p_ops); + dvb_detach(state->dib7000p_ops.set_wbd_ref); return -ENODEV; } } @@ -479,7 +479,7 @@ static int stk7700ph_frontend_attach(str &stk7700ph_dib7700_xc3028_config) != 0) { err("%s: state->dib7000p_ops.i2c_enumeration failed. Cannot continue\n", __func__); - dvb_detach(&state->dib7000p_ops); + dvb_detach(state->dib7000p_ops.set_wbd_ref); return -ENODEV; } @@ -1013,7 +1013,7 @@ static int stk7070p_frontend_attach(stru &dib7070p_dib7000p_config) != 0) { err("%s: state->dib7000p_ops.i2c_enumeration failed. Cannot continue\n", __func__); - dvb_detach(&state->dib7000p_ops); + dvb_detach(state->dib7000p_ops.set_wbd_ref); return -ENODEV; } @@ -1071,7 +1071,7 @@ static int stk7770p_frontend_attach(stru &dib7770p_dib7000p_config) != 0) { err("%s: state->dib7000p_ops.i2c_enumeration failed. Cannot continue\n", __func__); - dvb_detach(&state->dib7000p_ops); + dvb_detach(state->dib7000p_ops.set_wbd_ref); return -ENODEV; } @@ -3039,7 +3039,7 @@ static int nim7090_frontend_attach(struc if (state->dib7000p_ops.i2c_enumeration(&adap->dev->i2c_adap, 1, 0x10, &nim7090_dib7000p_config) != 0) { err("%s: state->dib7000p_ops.i2c_enumeration failed. Cannot continue\n", __func__); - dvb_detach(&state->dib7000p_ops); + dvb_detach(state->dib7000p_ops.set_wbd_ref); return -ENODEV; } adap->fe_adap[0].fe = state->dib7000p_ops.init(&adap->dev->i2c_adap, 0x80, &nim7090_dib7000p_config); @@ -3092,7 +3092,7 @@ static int tfe7090pvr_frontend0_attach(s /* initialize IC 0 */ if (state->dib7000p_ops.i2c_enumeration(&adap->dev->i2c_adap, 1, 0x20, &tfe7090pvr_dib7000p_config[0]) != 0) { err("%s: state->dib7000p_ops.i2c_enumeration failed. Cannot continue\n", __func__); - dvb_detach(&state->dib7000p_ops); + dvb_detach(state->dib7000p_ops.set_wbd_ref); return -ENODEV; } @@ -3122,7 +3122,7 @@ static int tfe7090pvr_frontend1_attach(s i2c = state->dib7000p_ops.get_i2c_master(adap->dev->adapter[0].fe_adap[0].fe, DIBX000_I2C_INTERFACE_GPIO_6_7, 1); if (state->dib7000p_ops.i2c_enumeration(i2c, 1, 0x10, &tfe7090pvr_dib7000p_config[1]) != 0) { err("%s: state->dib7000p_ops.i2c_enumeration failed. Cannot continue\n", __func__); - dvb_detach(&state->dib7000p_ops); + dvb_detach(state->dib7000p_ops.set_wbd_ref); return -ENODEV; } @@ -3197,7 +3197,7 @@ static int tfe7790p_frontend_attach(stru 1, 0x10, &tfe7790p_dib7000p_config) != 0) { err("%s: state->dib7000p_ops.i2c_enumeration failed. Cannot continue\n", __func__); - dvb_detach(&state->dib7000p_ops); + dvb_detach(state->dib7000p_ops.set_wbd_ref); return -ENODEV; } adap->fe_adap[0].fe = state->dib7000p_ops.init(&adap->dev->i2c_adap, @@ -3292,7 +3292,7 @@ static int stk7070pd_frontend_attach0(st stk7070pd_dib7000p_config) != 0) { err("%s: state->dib7000p_ops.i2c_enumeration failed. Cannot continue\n", __func__); - dvb_detach(&state->dib7000p_ops); + dvb_detach(state->dib7000p_ops.set_wbd_ref); return -ENODEV; } @@ -3367,7 +3367,7 @@ static int novatd_frontend_attach(struct stk7070pd_dib7000p_config) != 0) { err("%s: state->dib7000p_ops.i2c_enumeration failed. Cannot continue\n", __func__); - dvb_detach(&state->dib7000p_ops); + dvb_detach(state->dib7000p_ops.set_wbd_ref); return -ENODEV; } } @@ -3603,7 +3603,7 @@ static int pctv340e_frontend_attach(stru if (state->dib7000p_ops.dib7000pc_detection(&adap->dev->i2c_adap) == 0) { /* Demodulator not found for some reason? */ - dvb_detach(&state->dib7000p_ops); + dvb_detach(state->dib7000p_ops.set_wbd_ref); return -ENODEV; } Patches currently in stable-queue which might be from andreyknvl(a)google.com are queue-3.18/media-imon-fix-null-ptr-deref-in-imon_probe.patch queue-3.18/media-dib0700-fix-invalid-dvb_detach-argument.patch

7 years, 9 months

1
0
0 0

[Linux-stable-mirror] Patch "media: imon: Fix null-ptr-deref in imon_probe" has been added to the 3.18-stable tree

by gregkh＠linuxfoundation.org

This is a note to let you know that I've just added the patch titled media: imon: Fix null-ptr-deref in imon_probe to the 3.18-stable tree which can be found at: http://www.kernel.org/git/?p=linux/kernel/git/stable/stable-queue.git;a=sum… The filename of the patch is: media-imon-fix-null-ptr-deref-in-imon_probe.patch and it can be found in the queue-3.18 subdirectory. If you, or anyone else, feels it should not be added to the stable tree, please let <stable(a)vger.kernel.org> know about it. >From 58fd55e838276a0c13d1dc7c387f90f25063cbf3 Mon Sep 17 00:00:00 2001 From: Arvind Yadav <arvind.yadav.cs(a)gmail.com> Date: Mon, 9 Oct 2017 20:14:48 +0200 Subject: media: imon: Fix null-ptr-deref in imon_probe From: Arvind Yadav <arvind.yadav.cs(a)gmail.com> commit 58fd55e838276a0c13d1dc7c387f90f25063cbf3 upstream. It seems that the return value of usb_ifnum_to_if() can be NULL and needs to be checked. Signed-off-by: Arvind Yadav <arvind.yadav.cs(a)gmail.com> Tested-by: Andrey Konovalov <andreyknvl(a)google.com> Signed-off-by: Sean Young <sean(a)mess.org> Signed-off-by: Mauro Carvalho Chehab <mchehab(a)osg.samsung.com> Cc: Ben Hutchings <ben.hutchings(a)codethink.co.uk> Signed-off-by: Greg Kroah-Hartman <gregkh(a)linuxfoundation.org> --- drivers/media/rc/imon.c | 5 +++++ 1 file changed, 5 insertions(+) --- a/drivers/media/rc/imon.c +++ b/drivers/media/rc/imon.c @@ -2419,6 +2419,11 @@ static int imon_probe(struct usb_interfa mutex_lock(&driver_lock); first_if = usb_ifnum_to_if(usbdev, 0); + if (!first_if) { + ret = -ENODEV; + goto fail; + } + first_if_ctx = usb_get_intfdata(first_if); if (ifnum == 0) { Patches currently in stable-queue which might be from arvind.yadav.cs(a)gmail.com are queue-3.18/media-imon-fix-null-ptr-deref-in-imon_probe.patch

7 years, 9 months

1
0
0 0

[Linux-stable-mirror] Patch "media: imon: Fix null-ptr-deref in imon_probe" has been added to the 4.14-stable tree

by gregkh＠linuxfoundation.org

This is a note to let you know that I've just added the patch titled media: imon: Fix null-ptr-deref in imon_probe to the 4.14-stable tree which can be found at: http://www.kernel.org/git/?p=linux/kernel/git/stable/stable-queue.git;a=sum… The filename of the patch is: media-imon-fix-null-ptr-deref-in-imon_probe.patch and it can be found in the queue-4.14 subdirectory. If you, or anyone else, feels it should not be added to the stable tree, please let <stable(a)vger.kernel.org> know about it. >From 58fd55e838276a0c13d1dc7c387f90f25063cbf3 Mon Sep 17 00:00:00 2001 From: Arvind Yadav <arvind.yadav.cs(a)gmail.com> Date: Mon, 9 Oct 2017 20:14:48 +0200 Subject: media: imon: Fix null-ptr-deref in imon_probe From: Arvind Yadav <arvind.yadav.cs(a)gmail.com> commit 58fd55e838276a0c13d1dc7c387f90f25063cbf3 upstream. It seems that the return value of usb_ifnum_to_if() can be NULL and needs to be checked. Signed-off-by: Arvind Yadav <arvind.yadav.cs(a)gmail.com> Tested-by: Andrey Konovalov <andreyknvl(a)google.com> Signed-off-by: Sean Young <sean(a)mess.org> Signed-off-by: Mauro Carvalho Chehab <mchehab(a)osg.samsung.com> Cc: Ben Hutchings <ben.hutchings(a)codethink.co.uk> Signed-off-by: Greg Kroah-Hartman <gregkh(a)linuxfoundation.org> --- drivers/media/rc/imon.c | 5 +++++ 1 file changed, 5 insertions(+) --- a/drivers/media/rc/imon.c +++ b/drivers/media/rc/imon.c @@ -2517,6 +2517,11 @@ static int imon_probe(struct usb_interfa mutex_lock(&driver_lock); first_if = usb_ifnum_to_if(usbdev, 0); + if (!first_if) { + ret = -ENODEV; + goto fail; + } + first_if_ctx = usb_get_intfdata(first_if); if (ifnum == 0) { Patches currently in stable-queue which might be from arvind.yadav.cs(a)gmail.com are queue-4.14/media-imon-fix-null-ptr-deref-in-imon_probe.patch

7 years, 9 months

1
0
0 0

[Linux-stable-mirror] Patch "media: dib0700: fix invalid dvb_detach argument" has been added to the 4.14-stable tree

by gregkh＠linuxfoundation.org

This is a note to let you know that I've just added the patch titled media: dib0700: fix invalid dvb_detach argument to the 4.14-stable tree which can be found at: http://www.kernel.org/git/?p=linux/kernel/git/stable/stable-queue.git;a=sum… The filename of the patch is: media-dib0700-fix-invalid-dvb_detach-argument.patch and it can be found in the queue-4.14 subdirectory. If you, or anyone else, feels it should not be added to the stable tree, please let <stable(a)vger.kernel.org> know about it. >From eb0c19942288569e0ae492476534d5a485fb8ab4 Mon Sep 17 00:00:00 2001 From: Andrey Konovalov <andreyknvl(a)google.com> Date: Thu, 2 Nov 2017 10:38:21 -0400 Subject: media: dib0700: fix invalid dvb_detach argument From: Andrey Konovalov <andreyknvl(a)google.com> commit eb0c19942288569e0ae492476534d5a485fb8ab4 upstream. dvb_detach(arg) calls symbol_put_addr(arg), where arg should be a pointer to a function. Right now a pointer to state->dib7000p_ops is passed to dvb_detach(), which causes a BUG() in symbol_put_addr() as discovered by syzkaller. Pass state->dib7000p_ops.set_wbd_ref instead. ------------[ cut here ]------------ kernel BUG at kernel/module.c:1081! invalid opcode: 0000 [#1] PREEMPT SMP KASAN Modules linked in: CPU: 1 PID: 1151 Comm: kworker/1:1 Tainted: G W 4.14.0-rc1-42251-gebb2c2437d80 #224 Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS Bochs 01/01/2011 Workqueue: usb_hub_wq hub_event task: ffff88006a336300 task.stack: ffff88006a7c8000 RIP: 0010:symbol_put_addr+0x54/0x60 kernel/module.c:1083 RSP: 0018:ffff88006a7ce210 EFLAGS: 00010246 RAX: 0000000000000000 RBX: ffff880062a8d190 RCX: 0000000000000000 RDX: dffffc0000000020 RSI: ffffffff85876d60 RDI: ffff880062a8d190 RBP: ffff88006a7ce218 R08: 1ffff1000d4f9c12 R09: 1ffff1000d4f9ae4 R10: 1ffff1000d4f9bed R11: 0000000000000000 R12: ffff880062a8d180 R13: 00000000ffffffed R14: ffff880062a8d190 R15: ffff88006947c000 FS: 0000000000000000(0000) GS:ffff88006c900000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 00007f6416532000 CR3: 00000000632f5000 CR4: 00000000000006e0 Call Trace: stk7070p_frontend_attach+0x515/0x610 drivers/media/usb/dvb-usb/dib0700_devices.c:1013 dvb_usb_adapter_frontend_init+0x32b/0x660 drivers/media/usb/dvb-usb/dvb-usb-dvb.c:286 dvb_usb_adapter_init drivers/media/usb/dvb-usb/dvb-usb-init.c:86 dvb_usb_init drivers/media/usb/dvb-usb/dvb-usb-init.c:162 dvb_usb_device_init+0xf70/0x17f0 drivers/media/usb/dvb-usb/dvb-usb-init.c:277 dib0700_probe+0x171/0x5a0 drivers/media/usb/dvb-usb/dib0700_core.c:886 usb_probe_interface+0x35d/0x8e0 drivers/usb/core/driver.c:361 really_probe drivers/base/dd.c:413 driver_probe_device+0x610/0xa00 drivers/base/dd.c:557 __device_attach_driver+0x230/0x290 drivers/base/dd.c:653 bus_for_each_drv+0x161/0x210 drivers/base/bus.c:463 __device_attach+0x26e/0x3d0 drivers/base/dd.c:710 device_initial_probe+0x1f/0x30 drivers/base/dd.c:757 bus_probe_device+0x1eb/0x290 drivers/base/bus.c:523 device_add+0xd0b/0x1660 drivers/base/core.c:1835 usb_set_configuration+0x104e/0x1870 drivers/usb/core/message.c:1932 generic_probe+0x73/0xe0 drivers/usb/core/generic.c:174 usb_probe_device+0xaf/0xe0 drivers/usb/core/driver.c:266 really_probe drivers/base/dd.c:413 driver_probe_device+0x610/0xa00 drivers/base/dd.c:557 __device_attach_driver+0x230/0x290 drivers/base/dd.c:653 bus_for_each_drv+0x161/0x210 drivers/base/bus.c:463 __device_attach+0x26e/0x3d0 drivers/base/dd.c:710 device_initial_probe+0x1f/0x30 drivers/base/dd.c:757 bus_probe_device+0x1eb/0x290 drivers/base/bus.c:523 device_add+0xd0b/0x1660 drivers/base/core.c:1835 usb_new_device+0x7b8/0x1020 drivers/usb/core/hub.c:2457 hub_port_connect drivers/usb/core/hub.c:4903 hub_port_connect_change drivers/usb/core/hub.c:5009 port_event drivers/usb/core/hub.c:5115 hub_event+0x194d/0x3740 drivers/usb/core/hub.c:5195 process_one_work+0xc7f/0x1db0 kernel/workqueue.c:2119 worker_thread+0x221/0x1850 kernel/workqueue.c:2253 kthread+0x3a1/0x470 kernel/kthread.c:231 ret_from_fork+0x2a/0x40 arch/x86/entry/entry_64.S:431 Code: ff ff 48 85 c0 74 24 48 89 c7 e8 48 ea ff ff bf 01 00 00 00 e8 de 20 e3 ff 65 8b 05 b7 2f c2 7e 85 c0 75 c9 e8 f9 0b c1 ff eb c2 <0f> 0b 66 2e 0f 1f 84 00 00 00 00 00 0f 1f 44 00 00 48 b8 00 00 RIP: symbol_put_addr+0x54/0x60 RSP: ffff88006a7ce210 ---[ end trace b75b357739e7e116 ]--- Signed-off-by: Andrey Konovalov <andreyknvl(a)google.com> Cc: Ben Hutchings <ben.hutchings(a)codethink.co.uk> Signed-off-by: Mauro Carvalho Chehab <mchehab(a)s-opensource.com> Signed-off-by: Greg Kroah-Hartman <gregkh(a)linuxfoundation.org> --- drivers/media/usb/dvb-usb/dib0700_devices.c | 24 ++++++++++++------------ 1 file changed, 12 insertions(+), 12 deletions(-) --- a/drivers/media/usb/dvb-usb/dib0700_devices.c +++ b/drivers/media/usb/dvb-usb/dib0700_devices.c @@ -291,7 +291,7 @@ static int stk7700P2_frontend_attach(str stk7700d_dib7000p_mt2266_config) != 0) { err("%s: state->dib7000p_ops.i2c_enumeration failed. Cannot continue\n", __func__); - dvb_detach(&state->dib7000p_ops); + dvb_detach(state->dib7000p_ops.set_wbd_ref); return -ENODEV; } } @@ -325,7 +325,7 @@ static int stk7700d_frontend_attach(stru stk7700d_dib7000p_mt2266_config) != 0) { err("%s: state->dib7000p_ops.i2c_enumeration failed. Cannot continue\n", __func__); - dvb_detach(&state->dib7000p_ops); + dvb_detach(state->dib7000p_ops.set_wbd_ref); return -ENODEV; } } @@ -478,7 +478,7 @@ static int stk7700ph_frontend_attach(str &stk7700ph_dib7700_xc3028_config) != 0) { err("%s: state->dib7000p_ops.i2c_enumeration failed. Cannot continue\n", __func__); - dvb_detach(&state->dib7000p_ops); + dvb_detach(state->dib7000p_ops.set_wbd_ref); return -ENODEV; } @@ -1010,7 +1010,7 @@ static int stk7070p_frontend_attach(stru &dib7070p_dib7000p_config) != 0) { err("%s: state->dib7000p_ops.i2c_enumeration failed. Cannot continue\n", __func__); - dvb_detach(&state->dib7000p_ops); + dvb_detach(state->dib7000p_ops.set_wbd_ref); return -ENODEV; } @@ -1068,7 +1068,7 @@ static int stk7770p_frontend_attach(stru &dib7770p_dib7000p_config) != 0) { err("%s: state->dib7000p_ops.i2c_enumeration failed. Cannot continue\n", __func__); - dvb_detach(&state->dib7000p_ops); + dvb_detach(state->dib7000p_ops.set_wbd_ref); return -ENODEV; } @@ -3056,7 +3056,7 @@ static int nim7090_frontend_attach(struc if (state->dib7000p_ops.i2c_enumeration(&adap->dev->i2c_adap, 1, 0x10, &nim7090_dib7000p_config) != 0) { err("%s: state->dib7000p_ops.i2c_enumeration failed. Cannot continue\n", __func__); - dvb_detach(&state->dib7000p_ops); + dvb_detach(state->dib7000p_ops.set_wbd_ref); return -ENODEV; } adap->fe_adap[0].fe = state->dib7000p_ops.init(&adap->dev->i2c_adap, 0x80, &nim7090_dib7000p_config); @@ -3109,7 +3109,7 @@ static int tfe7090pvr_frontend0_attach(s /* initialize IC 0 */ if (state->dib7000p_ops.i2c_enumeration(&adap->dev->i2c_adap, 1, 0x20, &tfe7090pvr_dib7000p_config[0]) != 0) { err("%s: state->dib7000p_ops.i2c_enumeration failed. Cannot continue\n", __func__); - dvb_detach(&state->dib7000p_ops); + dvb_detach(state->dib7000p_ops.set_wbd_ref); return -ENODEV; } @@ -3139,7 +3139,7 @@ static int tfe7090pvr_frontend1_attach(s i2c = state->dib7000p_ops.get_i2c_master(adap->dev->adapter[0].fe_adap[0].fe, DIBX000_I2C_INTERFACE_GPIO_6_7, 1); if (state->dib7000p_ops.i2c_enumeration(i2c, 1, 0x10, &tfe7090pvr_dib7000p_config[1]) != 0) { err("%s: state->dib7000p_ops.i2c_enumeration failed. Cannot continue\n", __func__); - dvb_detach(&state->dib7000p_ops); + dvb_detach(state->dib7000p_ops.set_wbd_ref); return -ENODEV; } @@ -3214,7 +3214,7 @@ static int tfe7790p_frontend_attach(stru 1, 0x10, &tfe7790p_dib7000p_config) != 0) { err("%s: state->dib7000p_ops.i2c_enumeration failed. Cannot continue\n", __func__); - dvb_detach(&state->dib7000p_ops); + dvb_detach(state->dib7000p_ops.set_wbd_ref); return -ENODEV; } adap->fe_adap[0].fe = state->dib7000p_ops.init(&adap->dev->i2c_adap, @@ -3309,7 +3309,7 @@ static int stk7070pd_frontend_attach0(st stk7070pd_dib7000p_config) != 0) { err("%s: state->dib7000p_ops.i2c_enumeration failed. Cannot continue\n", __func__); - dvb_detach(&state->dib7000p_ops); + dvb_detach(state->dib7000p_ops.set_wbd_ref); return -ENODEV; } @@ -3384,7 +3384,7 @@ static int novatd_frontend_attach(struct stk7070pd_dib7000p_config) != 0) { err("%s: state->dib7000p_ops.i2c_enumeration failed. Cannot continue\n", __func__); - dvb_detach(&state->dib7000p_ops); + dvb_detach(state->dib7000p_ops.set_wbd_ref); return -ENODEV; } } @@ -3620,7 +3620,7 @@ static int pctv340e_frontend_attach(stru if (state->dib7000p_ops.dib7000pc_detection(&adap->dev->i2c_adap) == 0) { /* Demodulator not found for some reason? */ - dvb_detach(&state->dib7000p_ops); + dvb_detach(state->dib7000p_ops.set_wbd_ref); return -ENODEV; } Patches currently in stable-queue which might be from andreyknvl(a)google.com are queue-4.14/media-imon-fix-null-ptr-deref-in-imon_probe.patch queue-4.14/media-dib0700-fix-invalid-dvb_detach-argument.patch

7 years, 9 months

1
0
0 0

2025

2024

2023

2022

2021

2020

2019

2018

2017

Linux-stable-mirror