The patch below does not apply to the 4.9-stable tree.
If someone wants it applied there, or to any other stable or longterm
tree, then please email the backport, including the original git commit
id to <stable(a)vger.kernel.org>.
thanks,
greg k-h
------------------ original commit in Linus's tree ------------------
>From 996fc4477a0ea28226b30d175f053fb6f9a4fa36 Mon Sep 17 00:00:00 2001
From: Theodore Ts'o <tytso(a)mit.edu>
Date: Sun, 10 Dec 2017 23:44:11 -0500
Subject: [PATCH] ext4: add missing error check in __ext4_new_inode()
It's possible for ext4_get_acl() to return an ERR_PTR. So we need to
add a check for this case in __ext4_new_inode(). Otherwise on an
error we can end up oops the kernel.
This was getting triggered by xfstests generic/388, which is a test
which exercises the shutdown code path.
Signed-off-by: Theodore Ts'o <tytso(a)mit.edu>
Cc: stable(a)vger.kernel.org
diff --git a/fs/ext4/ialloc.c b/fs/ext4/ialloc.c
index b4267d72f249..b32cf263750d 100644
--- a/fs/ext4/ialloc.c
+++ b/fs/ext4/ialloc.c
@@ -816,6 +816,8 @@ struct inode *__ext4_new_inode(handle_t *handle, struct inode *dir,
#ifdef CONFIG_EXT4_FS_POSIX_ACL
struct posix_acl *p = get_acl(dir, ACL_TYPE_DEFAULT);
+ if (IS_ERR(p))
+ return ERR_CAST(p);
if (p) {
int acl_size = p->a_count * sizeof(ext4_acl_entry);
The patch below does not apply to the 4.14-stable tree.
If someone wants it applied there, or to any other stable or longterm
tree, then please email the backport, including the original git commit
id to <stable(a)vger.kernel.org>.
thanks,
greg k-h
------------------ original commit in Linus's tree ------------------
>From c1fd0abee0d52eb7e2871194b6c79d54792f515f Mon Sep 17 00:00:00 2001
From: Mike Snitzer <snitzer(a)redhat.com>
Date: Thu, 7 Dec 2017 22:42:27 -0500
Subject: [PATCH] dm mpath: fix bio-based multipath queue_if_no_path handling
Commit ca5beb76 ("dm mpath: micro-optimize the hot path relative to
MPATHF_QUEUE_IF_NO_PATH") caused bio-based DM-multipath to fail mptest's
"test_02_sdev_delete".
Restoring the logic that existed prior to commit ca5beb76 fixes this
bio-based DM-multipath regression. Also verified all mptest tests pass
with request-based DM-multipath.
This commit effectively reverts commit ca5beb76 -- but it does so
without reintroducing the need to take the m->lock spinlock in
must_push_back_{rq,bio}.
Fixes: ca5beb76 ("dm mpath: micro-optimize the hot path relative to MPATHF_QUEUE_IF_NO_PATH")
Cc: stable(a)vger.kernel.org # 4.12+
Signed-off-by: Mike Snitzer <snitzer(a)redhat.com>
diff --git a/drivers/md/dm-mpath.c b/drivers/md/dm-mpath.c
index 35a2a2fa477f..f7810cc869ac 100644
--- a/drivers/md/dm-mpath.c
+++ b/drivers/md/dm-mpath.c
@@ -457,6 +457,38 @@ do { \
dm_noflush_suspending((m)->ti)); \
} while (0)
+/*
+ * Check whether bios must be queued in the device-mapper core rather
+ * than here in the target.
+ *
+ * If MPATHF_QUEUE_IF_NO_PATH and MPATHF_SAVED_QUEUE_IF_NO_PATH hold
+ * the same value then we are not between multipath_presuspend()
+ * and multipath_resume() calls and we have no need to check
+ * for the DMF_NOFLUSH_SUSPENDING flag.
+ */
+static bool __must_push_back(struct multipath *m, unsigned long flags)
+{
+ return ((test_bit(MPATHF_QUEUE_IF_NO_PATH, &flags) !=
+ test_bit(MPATHF_SAVED_QUEUE_IF_NO_PATH, &flags)) &&
+ dm_noflush_suspending(m->ti));
+}
+
+/*
+ * Following functions use READ_ONCE to get atomic access to
+ * all m->flags to avoid taking spinlock
+ */
+static bool must_push_back_rq(struct multipath *m)
+{
+ unsigned long flags = READ_ONCE(m->flags);
+ return test_bit(MPATHF_QUEUE_IF_NO_PATH, &flags) || __must_push_back(m, flags);
+}
+
+static bool must_push_back_bio(struct multipath *m)
+{
+ unsigned long flags = READ_ONCE(m->flags);
+ return __must_push_back(m, flags);
+}
+
/*
* Map cloned requests (request-based multipath)
*/
@@ -478,7 +510,7 @@ static int multipath_clone_and_map(struct dm_target *ti, struct request *rq,
pgpath = choose_pgpath(m, nr_bytes);
if (!pgpath) {
- if (test_bit(MPATHF_QUEUE_IF_NO_PATH, &m->flags))
+ if (must_push_back_rq(m))
return DM_MAPIO_DELAY_REQUEUE;
dm_report_EIO(m); /* Failed */
return DM_MAPIO_KILL;
@@ -553,7 +585,7 @@ static int __multipath_map_bio(struct multipath *m, struct bio *bio, struct dm_m
}
if (!pgpath) {
- if (test_bit(MPATHF_QUEUE_IF_NO_PATH, &m->flags))
+ if (must_push_back_bio(m))
return DM_MAPIO_REQUEUE;
dm_report_EIO(m);
return DM_MAPIO_KILL;
@@ -651,8 +683,7 @@ static int queue_if_no_path(struct multipath *m, bool queue_if_no_path,
assign_bit(MPATHF_SAVED_QUEUE_IF_NO_PATH, &m->flags,
(save_old_value && test_bit(MPATHF_QUEUE_IF_NO_PATH, &m->flags)) ||
(!save_old_value && queue_if_no_path));
- assign_bit(MPATHF_QUEUE_IF_NO_PATH, &m->flags,
- queue_if_no_path || dm_noflush_suspending(m->ti));
+ assign_bit(MPATHF_QUEUE_IF_NO_PATH, &m->flags, queue_if_no_path);
spin_unlock_irqrestore(&m->lock, flags);
if (!queue_if_no_path) {
@@ -1486,7 +1517,7 @@ static int multipath_end_io(struct dm_target *ti, struct request *clone,
fail_path(pgpath);
if (atomic_read(&m->nr_valid_paths) == 0 &&
- !test_bit(MPATHF_QUEUE_IF_NO_PATH, &m->flags)) {
+ !must_push_back_rq(m)) {
if (error == BLK_STS_IOERR)
dm_report_EIO(m);
/* complete with the original error */
@@ -1521,8 +1552,12 @@ static int multipath_end_io_bio(struct dm_target *ti, struct bio *clone,
if (atomic_read(&m->nr_valid_paths) == 0 &&
!test_bit(MPATHF_QUEUE_IF_NO_PATH, &m->flags)) {
- dm_report_EIO(m);
- *error = BLK_STS_IOERR;
+ if (must_push_back_bio(m)) {
+ r = DM_ENDIO_REQUEUE;
+ } else {
+ dm_report_EIO(m);
+ *error = BLK_STS_IOERR;
+ }
goto done;
}
The patch below does not apply to the 3.18-stable tree.
If someone wants it applied there, or to any other stable or longterm
tree, then please email the backport, including the original git commit
id to <stable(a)vger.kernel.org>.
thanks,
greg k-h
------------------ original commit in Linus's tree ------------------
>From f24e5834a2c3f6c5f814a417f858226f0a010ade Mon Sep 17 00:00:00 2001
From: Steve Capper <steve.capper(a)arm.com>
Date: Mon, 4 Dec 2017 14:13:05 +0000
Subject: [PATCH] arm64: Initialise high_memory global variable earlier
The high_memory global variable is used by
cma_declare_contiguous(.) before it is defined.
We don't notice this as we compute __pa(high_memory - 1), and it looks
like we're processing a VA from the direct linear map.
This problem becomes apparent when we flip the kernel virtual address
space and the linear map is moved to the bottom of the kernel VA space.
This patch moves the initialisation of high_memory before it used.
Cc: <stable(a)vger.kernel.org>
Fixes: f7426b983a6a ("mm: cma: adjust address limit to avoid hitting low/high memory boundary")
Signed-off-by: Steve Capper <steve.capper(a)arm.com>
Signed-off-by: Will Deacon <will.deacon(a)arm.com>
diff --git a/arch/arm64/mm/init.c b/arch/arm64/mm/init.c
index 5960bef0170d..00e7b900ca41 100644
--- a/arch/arm64/mm/init.c
+++ b/arch/arm64/mm/init.c
@@ -476,6 +476,8 @@ void __init arm64_memblock_init(void)
reserve_elfcorehdr();
+ high_memory = __va(memblock_end_of_DRAM() - 1) + 1;
+
dma_contiguous_reserve(arm64_dma_phys_limit);
memblock_allow_resize();
@@ -502,7 +504,6 @@ void __init bootmem_init(void)
sparse_init();
zone_sizes_init(min, max);
- high_memory = __va((max << PAGE_SHIFT) - 1) + 1;
memblock_dump_all();
}
The patch below does not apply to the 4.4-stable tree.
If someone wants it applied there, or to any other stable or longterm
tree, then please email the backport, including the original git commit
id to <stable(a)vger.kernel.org>.
thanks,
greg k-h
------------------ original commit in Linus's tree ------------------
>From f24e5834a2c3f6c5f814a417f858226f0a010ade Mon Sep 17 00:00:00 2001
From: Steve Capper <steve.capper(a)arm.com>
Date: Mon, 4 Dec 2017 14:13:05 +0000
Subject: [PATCH] arm64: Initialise high_memory global variable earlier
The high_memory global variable is used by
cma_declare_contiguous(.) before it is defined.
We don't notice this as we compute __pa(high_memory - 1), and it looks
like we're processing a VA from the direct linear map.
This problem becomes apparent when we flip the kernel virtual address
space and the linear map is moved to the bottom of the kernel VA space.
This patch moves the initialisation of high_memory before it used.
Cc: <stable(a)vger.kernel.org>
Fixes: f7426b983a6a ("mm: cma: adjust address limit to avoid hitting low/high memory boundary")
Signed-off-by: Steve Capper <steve.capper(a)arm.com>
Signed-off-by: Will Deacon <will.deacon(a)arm.com>
diff --git a/arch/arm64/mm/init.c b/arch/arm64/mm/init.c
index 5960bef0170d..00e7b900ca41 100644
--- a/arch/arm64/mm/init.c
+++ b/arch/arm64/mm/init.c
@@ -476,6 +476,8 @@ void __init arm64_memblock_init(void)
reserve_elfcorehdr();
+ high_memory = __va(memblock_end_of_DRAM() - 1) + 1;
+
dma_contiguous_reserve(arm64_dma_phys_limit);
memblock_allow_resize();
@@ -502,7 +504,6 @@ void __init bootmem_init(void)
sparse_init();
zone_sizes_init(min, max);
- high_memory = __va((max << PAGE_SHIFT) - 1) + 1;
memblock_dump_all();
}
The patch below does not apply to the 4.9-stable tree.
If someone wants it applied there, or to any other stable or longterm
tree, then please email the backport, including the original git commit
id to <stable(a)vger.kernel.org>.
thanks,
greg k-h
------------------ original commit in Linus's tree ------------------
>From f24e5834a2c3f6c5f814a417f858226f0a010ade Mon Sep 17 00:00:00 2001
From: Steve Capper <steve.capper(a)arm.com>
Date: Mon, 4 Dec 2017 14:13:05 +0000
Subject: [PATCH] arm64: Initialise high_memory global variable earlier
The high_memory global variable is used by
cma_declare_contiguous(.) before it is defined.
We don't notice this as we compute __pa(high_memory - 1), and it looks
like we're processing a VA from the direct linear map.
This problem becomes apparent when we flip the kernel virtual address
space and the linear map is moved to the bottom of the kernel VA space.
This patch moves the initialisation of high_memory before it used.
Cc: <stable(a)vger.kernel.org>
Fixes: f7426b983a6a ("mm: cma: adjust address limit to avoid hitting low/high memory boundary")
Signed-off-by: Steve Capper <steve.capper(a)arm.com>
Signed-off-by: Will Deacon <will.deacon(a)arm.com>
diff --git a/arch/arm64/mm/init.c b/arch/arm64/mm/init.c
index 5960bef0170d..00e7b900ca41 100644
--- a/arch/arm64/mm/init.c
+++ b/arch/arm64/mm/init.c
@@ -476,6 +476,8 @@ void __init arm64_memblock_init(void)
reserve_elfcorehdr();
+ high_memory = __va(memblock_end_of_DRAM() - 1) + 1;
+
dma_contiguous_reserve(arm64_dma_phys_limit);
memblock_allow_resize();
@@ -502,7 +504,6 @@ void __init bootmem_init(void)
sparse_init();
zone_sizes_init(min, max);
- high_memory = __va((max << PAGE_SHIFT) - 1) + 1;
memblock_dump_all();
}
This is a note to let you know that I've just added the patch titled
usbip: fix stub_send_ret_submit() vulnerability to null transfer_buffer
to the 4.4-stable tree which can be found at:
http://www.kernel.org/git/?p=linux/kernel/git/stable/stable-queue.git;a=sum…
The filename of the patch is:
usbip-fix-stub_send_ret_submit-vulnerability-to-null-transfer_buffer.patch
and it can be found in the queue-4.4 subdirectory.
If you, or anyone else, feels it should not be added to the stable tree,
please let <stable(a)vger.kernel.org> know about it.
>From be6123df1ea8f01ee2f896a16c2b7be3e4557a5a Mon Sep 17 00:00:00 2001
From: Shuah Khan <shuahkh(a)osg.samsung.com>
Date: Thu, 7 Dec 2017 14:16:50 -0700
Subject: usbip: fix stub_send_ret_submit() vulnerability to null transfer_buffer
From: Shuah Khan <shuahkh(a)osg.samsung.com>
commit be6123df1ea8f01ee2f896a16c2b7be3e4557a5a upstream.
stub_send_ret_submit() handles urb with a potential null transfer_buffer,
when it replays a packet with potential malicious data that could contain
a null buffer. Add a check for the condition when actual_length > 0 and
transfer_buffer is null.
Reported-by: Secunia Research <vuln(a)secunia.com>
Signed-off-by: Shuah Khan <shuahkh(a)osg.samsung.com>
Signed-off-by: Greg Kroah-Hartman <gregkh(a)linuxfoundation.org>
---
drivers/usb/usbip/stub_tx.c | 7 +++++++
1 file changed, 7 insertions(+)
--- a/drivers/usb/usbip/stub_tx.c
+++ b/drivers/usb/usbip/stub_tx.c
@@ -178,6 +178,13 @@ static int stub_send_ret_submit(struct s
memset(&pdu_header, 0, sizeof(pdu_header));
memset(&msg, 0, sizeof(msg));
+ if (urb->actual_length > 0 && !urb->transfer_buffer) {
+ dev_err(&sdev->udev->dev,
+ "urb: actual_length %d transfer_buffer null\n",
+ urb->actual_length);
+ return -1;
+ }
+
if (usb_pipetype(urb->pipe) == PIPE_ISOCHRONOUS)
iovnum = 2 + urb->number_of_packets;
else
Patches currently in stable-queue which might be from shuahkh(a)osg.samsung.com are
queue-4.4/usbip-fix-stub_send_ret_submit-vulnerability-to-null-transfer_buffer.patch
This is a note to let you know that I've just added the patch titled
USB: core: prevent malicious bNumInterfaces overflow
to the 4.4-stable tree which can be found at:
http://www.kernel.org/git/?p=linux/kernel/git/stable/stable-queue.git;a=sum…
The filename of the patch is:
usb-core-prevent-malicious-bnuminterfaces-overflow.patch
and it can be found in the queue-4.4 subdirectory.
If you, or anyone else, feels it should not be added to the stable tree,
please let <stable(a)vger.kernel.org> know about it.
>From 48a4ff1c7bb5a32d2e396b03132d20d552c0eca7 Mon Sep 17 00:00:00 2001
From: Alan Stern <stern(a)rowland.harvard.edu>
Date: Tue, 12 Dec 2017 14:25:13 -0500
Subject: USB: core: prevent malicious bNumInterfaces overflow
From: Alan Stern <stern(a)rowland.harvard.edu>
commit 48a4ff1c7bb5a32d2e396b03132d20d552c0eca7 upstream.
A malicious USB device with crafted descriptors can cause the kernel
to access unallocated memory by setting the bNumInterfaces value too
high in a configuration descriptor. Although the value is adjusted
during parsing, this adjustment is skipped in one of the error return
paths.
This patch prevents the problem by setting bNumInterfaces to 0
initially. The existing code already sets it to the proper value
after parsing is complete.
Signed-off-by: Alan Stern <stern(a)rowland.harvard.edu>
Reported-by: Andrey Konovalov <andreyknvl(a)google.com>
Signed-off-by: Greg Kroah-Hartman <gregkh(a)linuxfoundation.org>
---
drivers/usb/core/config.c | 4 +++-
1 file changed, 3 insertions(+), 1 deletion(-)
--- a/drivers/usb/core/config.c
+++ b/drivers/usb/core/config.c
@@ -521,6 +521,9 @@ static int usb_parse_configuration(struc
unsigned iad_num = 0;
memcpy(&config->desc, buffer, USB_DT_CONFIG_SIZE);
+ nintf = nintf_orig = config->desc.bNumInterfaces;
+ config->desc.bNumInterfaces = 0; // Adjusted later
+
if (config->desc.bDescriptorType != USB_DT_CONFIG ||
config->desc.bLength < USB_DT_CONFIG_SIZE ||
config->desc.bLength > size) {
@@ -534,7 +537,6 @@ static int usb_parse_configuration(struc
buffer += config->desc.bLength;
size -= config->desc.bLength;
- nintf = nintf_orig = config->desc.bNumInterfaces;
if (nintf > USB_MAXINTERFACES) {
dev_warn(ddev, "config %d has too many interfaces: %d, "
"using maximum allowed: %d\n",
Patches currently in stable-queue which might be from stern(a)rowland.harvard.edu are
queue-4.4/usb-core-prevent-malicious-bnuminterfaces-overflow.patch
queue-4.4/usb-uas-and-storage-add-us_fl_broken_fua-for-another-jmicron-jms567-id.patch
This is a note to let you know that I've just added the patch titled
USB: uas and storage: Add US_FL_BROKEN_FUA for another JMicron JMS567 ID
to the 4.4-stable tree which can be found at:
http://www.kernel.org/git/?p=linux/kernel/git/stable/stable-queue.git;a=sum…
The filename of the patch is:
usb-uas-and-storage-add-us_fl_broken_fua-for-another-jmicron-jms567-id.patch
and it can be found in the queue-4.4 subdirectory.
If you, or anyone else, feels it should not be added to the stable tree,
please let <stable(a)vger.kernel.org> know about it.
>From 62354454625741f0569c2cbe45b2d192f8fd258e Mon Sep 17 00:00:00 2001
From: David Kozub <zub(a)linux.fjfi.cvut.cz>
Date: Tue, 5 Dec 2017 22:40:04 +0100
Subject: USB: uas and storage: Add US_FL_BROKEN_FUA for another JMicron JMS567 ID
From: David Kozub <zub(a)linux.fjfi.cvut.cz>
commit 62354454625741f0569c2cbe45b2d192f8fd258e upstream.
There is another JMS567-based USB3 UAS enclosure (152d:0578) that fails
with the following error:
[sda] tag#0 FAILED Result: hostbyte=DID_OK driverbyte=DRIVER_SENSE
[sda] tag#0 Sense Key : Illegal Request [current]
[sda] tag#0 Add. Sense: Invalid field in cdb
The issue occurs both with UAS (occasionally) and mass storage
(immediately after mounting a FS on a disk in the enclosure).
Enabling US_FL_BROKEN_FUA quirk solves this issue.
This patch adds an UNUSUAL_DEV with US_FL_BROKEN_FUA for the enclosure
for both UAS and mass storage.
Signed-off-by: David Kozub <zub(a)linux.fjfi.cvut.cz>
Acked-by: Alan Stern <stern(a)rowland.harvard.edu>
Signed-off-by: Greg Kroah-Hartman <gregkh(a)linuxfoundation.org>
---
drivers/usb/storage/unusual_devs.h | 7 +++++++
drivers/usb/storage/unusual_uas.h | 7 +++++++
2 files changed, 14 insertions(+)
--- a/drivers/usb/storage/unusual_devs.h
+++ b/drivers/usb/storage/unusual_devs.h
@@ -2149,6 +2149,13 @@ UNUSUAL_DEV(0x152d, 0x9561, 0x0000, 0x99
USB_SC_DEVICE, USB_PR_DEVICE, NULL,
US_FL_NO_REPORT_OPCODES),
+/* Reported by David Kozub <zub(a)linux.fjfi.cvut.cz> */
+UNUSUAL_DEV(0x152d, 0x0578, 0x0000, 0x9999,
+ "JMicron",
+ "JMS567",
+ USB_SC_DEVICE, USB_PR_DEVICE, NULL,
+ US_FL_BROKEN_FUA),
+
/*
* Patch by Constantin Baranov <const(a)tltsu.ru>
* Report by Andreas Koenecke.
--- a/drivers/usb/storage/unusual_uas.h
+++ b/drivers/usb/storage/unusual_uas.h
@@ -141,6 +141,13 @@ UNUSUAL_DEV(0x152d, 0x0567, 0x0000, 0x99
USB_SC_DEVICE, USB_PR_DEVICE, NULL,
US_FL_BROKEN_FUA | US_FL_NO_REPORT_OPCODES),
+/* Reported-by: David Kozub <zub(a)linux.fjfi.cvut.cz> */
+UNUSUAL_DEV(0x152d, 0x0578, 0x0000, 0x9999,
+ "JMicron",
+ "JMS567",
+ USB_SC_DEVICE, USB_PR_DEVICE, NULL,
+ US_FL_BROKEN_FUA),
+
/* Reported-by: Hans de Goede <hdegoede(a)redhat.com> */
UNUSUAL_DEV(0x2109, 0x0711, 0x0000, 0x9999,
"VIA",
Patches currently in stable-queue which might be from zub(a)linux.fjfi.cvut.cz are
queue-4.4/usb-uas-and-storage-add-us_fl_broken_fua-for-another-jmicron-jms567-id.patch
This is a note to let you know that I've just added the patch titled
tracing: Allocate mask_str buffer dynamically
to the 4.4-stable tree which can be found at:
http://www.kernel.org/git/?p=linux/kernel/git/stable/stable-queue.git;a=sum…
The filename of the patch is:
tracing-allocate-mask_str-buffer-dynamically.patch
and it can be found in the queue-4.4 subdirectory.
If you, or anyone else, feels it should not be added to the stable tree,
please let <stable(a)vger.kernel.org> know about it.
>From 90e406f96f630c07d631a021fd4af10aac913e77 Mon Sep 17 00:00:00 2001
From: Changbin Du <changbin.du(a)intel.com>
Date: Thu, 30 Nov 2017 11:39:43 +0800
Subject: tracing: Allocate mask_str buffer dynamically
From: Changbin Du <changbin.du(a)intel.com>
commit 90e406f96f630c07d631a021fd4af10aac913e77 upstream.
The default NR_CPUS can be very large, but actual possible nr_cpu_ids
usually is very small. For my x86 distribution, the NR_CPUS is 8192 and
nr_cpu_ids is 4. About 2 pages are wasted.
Most machines don't have so many CPUs, so define a array with NR_CPUS
just wastes memory. So let's allocate the buffer dynamically when need.
With this change, the mutext tracing_cpumask_update_lock also can be
removed now, which was used to protect mask_str.
Link: http://lkml.kernel.org/r/1512013183-19107-1-git-send-email-changbin.du@inte…
Fixes: 36dfe9252bd4c ("ftrace: make use of tracing_cpumask")
Signed-off-by: Changbin Du <changbin.du(a)intel.com>
Signed-off-by: Steven Rostedt (VMware) <rostedt(a)goodmis.org>
Signed-off-by: Greg Kroah-Hartman <gregkh(a)linuxfoundation.org>
---
kernel/trace/trace.c | 29 +++++++++--------------------
1 file changed, 9 insertions(+), 20 deletions(-)
--- a/kernel/trace/trace.c
+++ b/kernel/trace/trace.c
@@ -3384,37 +3384,30 @@ static const struct file_operations show
.llseek = seq_lseek,
};
-/*
- * The tracer itself will not take this lock, but still we want
- * to provide a consistent cpumask to user-space:
- */
-static DEFINE_MUTEX(tracing_cpumask_update_lock);
-
-/*
- * Temporary storage for the character representation of the
- * CPU bitmask (and one more byte for the newline):
- */
-static char mask_str[NR_CPUS + 1];
-
static ssize_t
tracing_cpumask_read(struct file *filp, char __user *ubuf,
size_t count, loff_t *ppos)
{
struct trace_array *tr = file_inode(filp)->i_private;
+ char *mask_str;
int len;
- mutex_lock(&tracing_cpumask_update_lock);
+ len = snprintf(NULL, 0, "%*pb\n",
+ cpumask_pr_args(tr->tracing_cpumask)) + 1;
+ mask_str = kmalloc(len, GFP_KERNEL);
+ if (!mask_str)
+ return -ENOMEM;
- len = snprintf(mask_str, count, "%*pb\n",
+ len = snprintf(mask_str, len, "%*pb\n",
cpumask_pr_args(tr->tracing_cpumask));
if (len >= count) {
count = -EINVAL;
goto out_err;
}
- count = simple_read_from_buffer(ubuf, count, ppos, mask_str, NR_CPUS+1);
+ count = simple_read_from_buffer(ubuf, count, ppos, mask_str, len);
out_err:
- mutex_unlock(&tracing_cpumask_update_lock);
+ kfree(mask_str);
return count;
}
@@ -3434,8 +3427,6 @@ tracing_cpumask_write(struct file *filp,
if (err)
goto err_unlock;
- mutex_lock(&tracing_cpumask_update_lock);
-
local_irq_disable();
arch_spin_lock(&tr->max_lock);
for_each_tracing_cpu(cpu) {
@@ -3458,8 +3449,6 @@ tracing_cpumask_write(struct file *filp,
local_irq_enable();
cpumask_copy(tr->tracing_cpumask, tracing_cpumask_new);
-
- mutex_unlock(&tracing_cpumask_update_lock);
free_cpumask_var(tracing_cpumask_new);
return count;
Patches currently in stable-queue which might be from changbin.du(a)intel.com are
queue-4.4/tracing-allocate-mask_str-buffer-dynamically.patch
This is a note to let you know that I've just added the patch titled
ceph: drop negative child dentries before try pruning inode's alias
to the 4.4-stable tree which can be found at:
http://www.kernel.org/git/?p=linux/kernel/git/stable/stable-queue.git;a=sum…
The filename of the patch is:
ceph-drop-negative-child-dentries-before-try-pruning-inode-s-alias.patch
and it can be found in the queue-4.4 subdirectory.
If you, or anyone else, feels it should not be added to the stable tree,
please let <stable(a)vger.kernel.org> know about it.
>From 040d786032bf59002d374b86d75b04d97624005c Mon Sep 17 00:00:00 2001
From: "Yan, Zheng" <zyan(a)redhat.com>
Date: Thu, 30 Nov 2017 11:59:22 +0800
Subject: ceph: drop negative child dentries before try pruning inode's alias
From: Yan, Zheng <zyan(a)redhat.com>
commit 040d786032bf59002d374b86d75b04d97624005c upstream.
Negative child dentry holds reference on inode's alias, it makes
d_prune_aliases() do nothing.
Signed-off-by: "Yan, Zheng" <zyan(a)redhat.com>
Reviewed-by: Jeff Layton <jlayton(a)redhat.com>
Signed-off-by: Ilya Dryomov <idryomov(a)gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh(a)linuxfoundation.org>
---
fs/ceph/mds_client.c | 42 ++++++++++++++++++++++++++++++++++++++----
1 file changed, 38 insertions(+), 4 deletions(-)
--- a/fs/ceph/mds_client.c
+++ b/fs/ceph/mds_client.c
@@ -1400,6 +1400,29 @@ static int __close_session(struct ceph_m
return request_close_session(mdsc, session);
}
+static bool drop_negative_children(struct dentry *dentry)
+{
+ struct dentry *child;
+ bool all_negative = true;
+
+ if (!d_is_dir(dentry))
+ goto out;
+
+ spin_lock(&dentry->d_lock);
+ list_for_each_entry(child, &dentry->d_subdirs, d_child) {
+ if (d_really_is_positive(child)) {
+ all_negative = false;
+ break;
+ }
+ }
+ spin_unlock(&dentry->d_lock);
+
+ if (all_negative)
+ shrink_dcache_parent(dentry);
+out:
+ return all_negative;
+}
+
/*
* Trim old(er) caps.
*
@@ -1445,16 +1468,27 @@ static int trim_caps_cb(struct inode *in
if ((used | wanted) & ~oissued & mine)
goto out; /* we need these caps */
- session->s_trim_caps--;
if (oissued) {
/* we aren't the only cap.. just remove us */
__ceph_remove_cap(cap, true);
+ session->s_trim_caps--;
} else {
+ struct dentry *dentry;
/* try dropping referring dentries */
spin_unlock(&ci->i_ceph_lock);
- d_prune_aliases(inode);
- dout("trim_caps_cb %p cap %p pruned, count now %d\n",
- inode, cap, atomic_read(&inode->i_count));
+ dentry = d_find_any_alias(inode);
+ if (dentry && drop_negative_children(dentry)) {
+ int count;
+ dput(dentry);
+ d_prune_aliases(inode);
+ count = atomic_read(&inode->i_count);
+ if (count == 1)
+ session->s_trim_caps--;
+ dout("trim_caps_cb %p cap %p pruned, count now %d\n",
+ inode, cap, count);
+ } else {
+ dput(dentry);
+ }
return 0;
}
Patches currently in stable-queue which might be from zyan(a)redhat.com are
queue-4.4/ceph-drop-negative-child-dentries-before-try-pruning-inode-s-alias.patch
This is a note to let you know that I've just added the patch titled
autofs: fix careless error in recent commit
to the 4.4-stable tree which can be found at:
http://www.kernel.org/git/?p=linux/kernel/git/stable/stable-queue.git;a=sum…
The filename of the patch is:
autofs-fix-careless-error-in-recent-commit.patch
and it can be found in the queue-4.4 subdirectory.
If you, or anyone else, feels it should not be added to the stable tree,
please let <stable(a)vger.kernel.org> know about it.
>From 302ec300ef8a545a7fc7f667e5fd743b091c2eeb Mon Sep 17 00:00:00 2001
From: NeilBrown <neilb(a)suse.com>
Date: Thu, 14 Dec 2017 15:32:38 -0800
Subject: autofs: fix careless error in recent commit
From: NeilBrown <neilb(a)suse.com>
commit 302ec300ef8a545a7fc7f667e5fd743b091c2eeb upstream.
Commit ecc0c469f277 ("autofs: don't fail mount for transient error") was
meant to replace an 'if' with a 'switch', but instead added the 'switch'
leaving the case in place.
Link: http://lkml.kernel.org/r/87zi6wstmw.fsf@notabene.neil.brown.name
Fixes: ecc0c469f277 ("autofs: don't fail mount for transient error")
Reported-by: Ben Hutchings <ben.hutchings(a)codethink.co.uk>
Signed-off-by: NeilBrown <neilb(a)suse.com>
Cc: Ian Kent <raven(a)themaw.net>
Signed-off-by: Andrew Morton <akpm(a)linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds(a)linux-foundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh(a)linuxfoundation.org>
---
fs/autofs4/waitq.c | 1 -
1 file changed, 1 deletion(-)
--- a/fs/autofs4/waitq.c
+++ b/fs/autofs4/waitq.c
@@ -174,7 +174,6 @@ static void autofs4_notify_daemon(struct
mutex_unlock(&sbi->wq_mutex);
- if (autofs4_write(sbi, pipe, &pkt, pktsz))
switch (ret = autofs4_write(sbi, pipe, &pkt, pktsz)) {
case 0:
break;
Patches currently in stable-queue which might be from neilb(a)suse.com are
queue-4.4/autofs-fix-careless-error-in-recent-commit.patch
This is a note to let you know that I've just added the patch titled
Bluetooth: btusb: driver to enable the usb-wakeup feature
to the 4.4-stable tree which can be found at:
http://www.kernel.org/git/?p=linux/kernel/git/stable/stable-queue.git;a=sum…
The filename of the patch is:
bluetooth-btusb-driver-to-enable-the-usb-wakeup-feature.patch
and it can be found in the queue-4.4 subdirectory.
If you, or anyone else, feels it should not be added to the stable tree,
please let <stable(a)vger.kernel.org> know about it.
>From a0085f2510e8976614ad8f766b209448b385492f Mon Sep 17 00:00:00 2001
From: Sukumar Ghorai <sukumar.ghorai(a)intel.com>
Date: Wed, 16 Aug 2017 14:46:55 -0700
Subject: Bluetooth: btusb: driver to enable the usb-wakeup feature
From: Sukumar Ghorai <sukumar.ghorai(a)intel.com>
commit a0085f2510e8976614ad8f766b209448b385492f upstream.
BT-Controller connected as platform non-root-hub device and
usb-driver initialize such device with wakeup disabled,
Ref. usb_new_device().
At present wakeup-capability get enabled by hid-input device from usb
function driver(e.g. BT HID device) at runtime. Again some functional
driver does not set usb-wakeup capability(e.g LE HID device implement
as HID-over-GATT), and can't wakeup the host on USB.
Most of the device operation (such as mass storage) initiated from host
(except HID) and USB wakeup aligned with host resume procedure. For BT
device, usb-wakeup capability need to enable form btusc driver as a
generic solution for multiple profile use case and required for USB remote
wakeup (in-bus wakeup) while host is suspended. Also usb-wakeup feature
need to enable/disable with HCI interface up and down.
Signed-off-by: Sukumar Ghorai <sukumar.ghorai(a)intel.com>
Signed-off-by: Amit K Bag <amit.k.bag(a)intel.com>
Acked-by: Oliver Neukum <oneukum(a)suse.com>
Signed-off-by: Marcel Holtmann <marcel(a)holtmann.org>
Cc: Matthias Kaehlcke <mka(a)chromium.org>
Signed-off-by: Greg Kroah-Hartman <gregkh(a)linuxfoundation.org>
---
drivers/bluetooth/btusb.c | 5 +++++
1 file changed, 5 insertions(+)
--- a/drivers/bluetooth/btusb.c
+++ b/drivers/bluetooth/btusb.c
@@ -1050,6 +1050,10 @@ static int btusb_open(struct hci_dev *hd
return err;
data->intf->needs_remote_wakeup = 1;
+ /* device specific wakeup source enabled and required for USB
+ * remote wakeup while host is suspended
+ */
+ device_wakeup_enable(&data->udev->dev);
if (test_and_set_bit(BTUSB_INTR_RUNNING, &data->flags))
goto done;
@@ -1113,6 +1117,7 @@ static int btusb_close(struct hci_dev *h
goto failed;
data->intf->needs_remote_wakeup = 0;
+ device_wakeup_disable(&data->udev->dev);
usb_autopm_put_interface(data->intf);
failed:
Patches currently in stable-queue which might be from sukumar.ghorai(a)intel.com are
queue-4.4/bluetooth-btusb-driver-to-enable-the-usb-wakeup-feature.patch
The patch below does not apply to the 3.18-stable tree.
If someone wants it applied there, or to any other stable or longterm
tree, then please email the backport, including the original git commit
id to <stable(a)vger.kernel.org>.
thanks,
greg k-h
------------------ original commit in Linus's tree ------------------
>From bd3486ded7a0c313a6575343e6c2b21d14476645 Mon Sep 17 00:00:00 2001
From: Bin Liu <b-liu(a)ti.com>
Date: Tue, 5 Dec 2017 08:45:30 -0600
Subject: [PATCH] usb: musb: da8xx: fix babble condition handling
When babble condition happens, the musb controller might automatically
turns off VBUS. On DA8xx platform, the controller generates drvvbus
interrupt for turning off VBUS along with the babble interrupt.
In this case, we should handle the babble interrupt first and recover
from the babble condition.
This change ignores the drvvbus interrupt if babble interrupt is also
generated at the same time, so the babble recovery routine works
properly.
Cc: stable(a)vger.kernel.org # v3.16+
Signed-off-by: Bin Liu <b-liu(a)ti.com>
Signed-off-by: Greg Kroah-Hartman <gregkh(a)linuxfoundation.org>
diff --git a/drivers/usb/musb/da8xx.c b/drivers/usb/musb/da8xx.c
index 0397606a211b..6c036de63272 100644
--- a/drivers/usb/musb/da8xx.c
+++ b/drivers/usb/musb/da8xx.c
@@ -284,7 +284,15 @@ static irqreturn_t da8xx_musb_interrupt(int irq, void *hci)
musb->xceiv->otg->state = OTG_STATE_A_WAIT_VRISE;
portstate(musb->port1_status |= USB_PORT_STAT_POWER);
del_timer(&musb->dev_timer);
- } else {
+ } else if (!(musb->int_usb & MUSB_INTR_BABBLE)) {
+ /*
+ * When babble condition happens, drvvbus interrupt
+ * is also generated. Ignore this drvvbus interrupt
+ * and let babble interrupt handler recovers the
+ * controller; otherwise, the host-mode flag is lost
+ * due to the MUSB_DEV_MODE() call below and babble
+ * recovery logic will not be called.
+ */
musb->is_active = 0;
MUSB_DEV_MODE(musb);
otg->default_a = 0;
The patch below does not apply to the 4.4-stable tree.
If someone wants it applied there, or to any other stable or longterm
tree, then please email the backport, including the original git commit
id to <stable(a)vger.kernel.org>.
thanks,
greg k-h
------------------ original commit in Linus's tree ------------------
>From bd3486ded7a0c313a6575343e6c2b21d14476645 Mon Sep 17 00:00:00 2001
From: Bin Liu <b-liu(a)ti.com>
Date: Tue, 5 Dec 2017 08:45:30 -0600
Subject: [PATCH] usb: musb: da8xx: fix babble condition handling
When babble condition happens, the musb controller might automatically
turns off VBUS. On DA8xx platform, the controller generates drvvbus
interrupt for turning off VBUS along with the babble interrupt.
In this case, we should handle the babble interrupt first and recover
from the babble condition.
This change ignores the drvvbus interrupt if babble interrupt is also
generated at the same time, so the babble recovery routine works
properly.
Cc: stable(a)vger.kernel.org # v3.16+
Signed-off-by: Bin Liu <b-liu(a)ti.com>
Signed-off-by: Greg Kroah-Hartman <gregkh(a)linuxfoundation.org>
diff --git a/drivers/usb/musb/da8xx.c b/drivers/usb/musb/da8xx.c
index 0397606a211b..6c036de63272 100644
--- a/drivers/usb/musb/da8xx.c
+++ b/drivers/usb/musb/da8xx.c
@@ -284,7 +284,15 @@ static irqreturn_t da8xx_musb_interrupt(int irq, void *hci)
musb->xceiv->otg->state = OTG_STATE_A_WAIT_VRISE;
portstate(musb->port1_status |= USB_PORT_STAT_POWER);
del_timer(&musb->dev_timer);
- } else {
+ } else if (!(musb->int_usb & MUSB_INTR_BABBLE)) {
+ /*
+ * When babble condition happens, drvvbus interrupt
+ * is also generated. Ignore this drvvbus interrupt
+ * and let babble interrupt handler recovers the
+ * controller; otherwise, the host-mode flag is lost
+ * due to the MUSB_DEV_MODE() call below and babble
+ * recovery logic will not be called.
+ */
musb->is_active = 0;
MUSB_DEV_MODE(musb);
otg->default_a = 0;
The patch below does not apply to the 4.14-stable tree.
If someone wants it applied there, or to any other stable or longterm
tree, then please email the backport, including the original git commit
id to <stable(a)vger.kernel.org>.
thanks,
greg k-h
------------------ original commit in Linus's tree ------------------
>From e8d4bfe3a71537284a90561f77c85dea6c154369 Mon Sep 17 00:00:00 2001
From: Chengguang Xu <cgxu(a)mykernel.net>
Date: Wed, 29 Nov 2017 10:01:32 +0800
Subject: [PATCH] ovl: Sync upper dirty data when syncing overlayfs
When executing filesystem sync or umount on overlayfs,
dirty data does not get synced as expected on upper filesystem.
This patch fixes sync filesystem method to keep data consistency
for overlayfs.
Signed-off-by: Chengguang Xu <cgxu(a)mykernel.net>
Fixes: e593b2bf513d ("ovl: properly implement sync_filesystem()")
Cc: <stable(a)vger.kernel.org> #4.11
Signed-off-by: Miklos Szeredi <mszeredi(a)redhat.com>
diff --git a/fs/overlayfs/super.c b/fs/overlayfs/super.c
index 13a8a8617e44..76440feb79f6 100644
--- a/fs/overlayfs/super.c
+++ b/fs/overlayfs/super.c
@@ -252,6 +252,7 @@ static void ovl_put_super(struct super_block *sb)
ovl_free_fs(ofs);
}
+/* Sync real dirty inodes in upper filesystem (if it exists) */
static int ovl_sync_fs(struct super_block *sb, int wait)
{
struct ovl_fs *ofs = sb->s_fs_info;
@@ -260,14 +261,24 @@ static int ovl_sync_fs(struct super_block *sb, int wait)
if (!ofs->upper_mnt)
return 0;
- upper_sb = ofs->upper_mnt->mnt_sb;
- if (!upper_sb->s_op->sync_fs)
+
+ /*
+ * If this is a sync(2) call or an emergency sync, all the super blocks
+ * will be iterated, including upper_sb, so no need to do anything.
+ *
+ * If this is a syncfs(2) call, then we do need to call
+ * sync_filesystem() on upper_sb, but enough if we do it when being
+ * called with wait == 1.
+ */
+ if (!wait)
return 0;
- /* real inodes have already been synced by sync_filesystem(ovl_sb) */
+ upper_sb = ofs->upper_mnt->mnt_sb;
+
down_read(&upper_sb->s_umount);
- ret = upper_sb->s_op->sync_fs(upper_sb, wait);
+ ret = sync_filesystem(upper_sb);
up_read(&upper_sb->s_umount);
+
return ret;
}
This is a note to let you know that I've just added the patch titled
crypto: salsa20 - fix blkcipher_walk API usage
to the 4.9-stable tree which can be found at:
http://www.kernel.org/git/?p=linux/kernel/git/stable/stable-queue.git;a=sum…
The filename of the patch is:
crypto-salsa20-fix-blkcipher_walk-api-usage.patch
and it can be found in the queue-4.9 subdirectory.
If you, or anyone else, feels it should not be added to the stable tree,
please let <stable(a)vger.kernel.org> know about it.
>From ecaaab5649781c5a0effdaf298a925063020500e Mon Sep 17 00:00:00 2001
From: Eric Biggers <ebiggers(a)google.com>
Date: Tue, 28 Nov 2017 20:56:59 -0800
Subject: crypto: salsa20 - fix blkcipher_walk API usage
From: Eric Biggers <ebiggers(a)google.com>
commit ecaaab5649781c5a0effdaf298a925063020500e upstream.
When asked to encrypt or decrypt 0 bytes, both the generic and x86
implementations of Salsa20 crash in blkcipher_walk_done(), either when
doing 'kfree(walk->buffer)' or 'free_page((unsigned long)walk->page)',
because walk->buffer and walk->page have not been initialized.
The bug is that Salsa20 is calling blkcipher_walk_done() even when
nothing is in 'walk.nbytes'. But blkcipher_walk_done() is only meant to
be called when a nonzero number of bytes have been provided.
The broken code is part of an optimization that tries to make only one
call to salsa20_encrypt_bytes() to process inputs that are not evenly
divisible by 64 bytes. To fix the bug, just remove this "optimization"
and use the blkcipher_walk API the same way all the other users do.
Reproducer:
#include <linux/if_alg.h>
#include <sys/socket.h>
#include <unistd.h>
int main()
{
int algfd, reqfd;
struct sockaddr_alg addr = {
.salg_type = "skcipher",
.salg_name = "salsa20",
};
char key[16] = { 0 };
algfd = socket(AF_ALG, SOCK_SEQPACKET, 0);
bind(algfd, (void *)&addr, sizeof(addr));
reqfd = accept(algfd, 0, 0);
setsockopt(algfd, SOL_ALG, ALG_SET_KEY, key, sizeof(key));
read(reqfd, key, sizeof(key));
}
Reported-by: syzbot <syzkaller(a)googlegroups.com>
Fixes: eb6f13eb9f81 ("[CRYPTO] salsa20_generic: Fix multi-page processing")
Signed-off-by: Eric Biggers <ebiggers(a)google.com>
Signed-off-by: Herbert Xu <herbert(a)gondor.apana.org.au>
Signed-off-by: Greg Kroah-Hartman <gregkh(a)linuxfoundation.org>
---
arch/x86/crypto/salsa20_glue.c | 7 -------
crypto/salsa20_generic.c | 7 -------
2 files changed, 14 deletions(-)
--- a/arch/x86/crypto/salsa20_glue.c
+++ b/arch/x86/crypto/salsa20_glue.c
@@ -59,13 +59,6 @@ static int encrypt(struct blkcipher_desc
salsa20_ivsetup(ctx, walk.iv);
- if (likely(walk.nbytes == nbytes))
- {
- salsa20_encrypt_bytes(ctx, walk.src.virt.addr,
- walk.dst.virt.addr, nbytes);
- return blkcipher_walk_done(desc, &walk, 0);
- }
-
while (walk.nbytes >= 64) {
salsa20_encrypt_bytes(ctx, walk.src.virt.addr,
walk.dst.virt.addr,
--- a/crypto/salsa20_generic.c
+++ b/crypto/salsa20_generic.c
@@ -188,13 +188,6 @@ static int encrypt(struct blkcipher_desc
salsa20_ivsetup(ctx, walk.iv);
- if (likely(walk.nbytes == nbytes))
- {
- salsa20_encrypt_bytes(ctx, walk.dst.virt.addr,
- walk.src.virt.addr, nbytes);
- return blkcipher_walk_done(desc, &walk, 0);
- }
-
while (walk.nbytes >= 64) {
salsa20_encrypt_bytes(ctx, walk.dst.virt.addr,
walk.src.virt.addr,
Patches currently in stable-queue which might be from ebiggers(a)google.com are
queue-4.9/crypto-salsa20-fix-blkcipher_walk-api-usage.patch
queue-4.9/crypto-rsa-fix-buffer-overread-when-stripping-leading-zeroes.patch
queue-4.9/crypto-hmac-require-that-the-underlying-hash-algorithm-is-unkeyed.patch
This is a note to let you know that I've just added the patch titled
crypto: rsa - fix buffer overread when stripping leading zeroes
to the 4.9-stable tree which can be found at:
http://www.kernel.org/git/?p=linux/kernel/git/stable/stable-queue.git;a=sum…
The filename of the patch is:
crypto-rsa-fix-buffer-overread-when-stripping-leading-zeroes.patch
and it can be found in the queue-4.9 subdirectory.
If you, or anyone else, feels it should not be added to the stable tree,
please let <stable(a)vger.kernel.org> know about it.
>From d2890c3778b164fde587bc16583f3a1c87233ec5 Mon Sep 17 00:00:00 2001
From: Eric Biggers <ebiggers(a)google.com>
Date: Sun, 26 Nov 2017 23:16:49 -0800
Subject: crypto: rsa - fix buffer overread when stripping leading zeroes
From: Eric Biggers <ebiggers(a)google.com>
commit d2890c3778b164fde587bc16583f3a1c87233ec5 upstream.
In rsa_get_n(), if the buffer contained all 0's and "FIPS mode" is
enabled, we would read one byte past the end of the buffer while
scanning the leading zeroes. Fix it by checking 'n_sz' before '!*ptr'.
This bug was reachable by adding a specially crafted key of type
"asymmetric" (requires CONFIG_RSA and CONFIG_X509_CERTIFICATE_PARSER).
KASAN report:
BUG: KASAN: slab-out-of-bounds in rsa_get_n+0x19e/0x1d0 crypto/rsa_helper.c:33
Read of size 1 at addr ffff88003501a708 by task keyctl/196
CPU: 1 PID: 196 Comm: keyctl Not tainted 4.14.0-09238-g1d3b78bbc6e9 #26
Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.11.0-20171110_100015-anatol 04/01/2014
Call Trace:
rsa_get_n+0x19e/0x1d0 crypto/rsa_helper.c:33
asn1_ber_decoder+0x82a/0x1fd0 lib/asn1_decoder.c:328
rsa_set_pub_key+0xd3/0x320 crypto/rsa.c:278
crypto_akcipher_set_pub_key ./include/crypto/akcipher.h:364 [inline]
pkcs1pad_set_pub_key+0xae/0x200 crypto/rsa-pkcs1pad.c:117
crypto_akcipher_set_pub_key ./include/crypto/akcipher.h:364 [inline]
public_key_verify_signature+0x270/0x9d0 crypto/asymmetric_keys/public_key.c:106
x509_check_for_self_signed+0x2ea/0x480 crypto/asymmetric_keys/x509_public_key.c:141
x509_cert_parse+0x46a/0x620 crypto/asymmetric_keys/x509_cert_parser.c:129
x509_key_preparse+0x61/0x750 crypto/asymmetric_keys/x509_public_key.c:174
asymmetric_key_preparse+0xa4/0x150 crypto/asymmetric_keys/asymmetric_type.c:388
key_create_or_update+0x4d4/0x10a0 security/keys/key.c:850
SYSC_add_key security/keys/keyctl.c:122 [inline]
SyS_add_key+0xe8/0x290 security/keys/keyctl.c:62
entry_SYSCALL_64_fastpath+0x1f/0x96
Allocated by task 196:
__do_kmalloc mm/slab.c:3711 [inline]
__kmalloc_track_caller+0x118/0x2e0 mm/slab.c:3726
kmemdup+0x17/0x40 mm/util.c:118
kmemdup ./include/linux/string.h:414 [inline]
x509_cert_parse+0x2cb/0x620 crypto/asymmetric_keys/x509_cert_parser.c:106
x509_key_preparse+0x61/0x750 crypto/asymmetric_keys/x509_public_key.c:174
asymmetric_key_preparse+0xa4/0x150 crypto/asymmetric_keys/asymmetric_type.c:388
key_create_or_update+0x4d4/0x10a0 security/keys/key.c:850
SYSC_add_key security/keys/keyctl.c:122 [inline]
SyS_add_key+0xe8/0x290 security/keys/keyctl.c:62
entry_SYSCALL_64_fastpath+0x1f/0x96
Fixes: 5a7de97309f5 ("crypto: rsa - return raw integers for the ASN.1 parser")
Cc: Tudor Ambarus <tudor-dan.ambarus(a)nxp.com>
Signed-off-by: Eric Biggers <ebiggers(a)google.com>
Reviewed-by: James Morris <james.l.morris(a)oracle.com>
Reviewed-by: David Howells <dhowells(a)redhat.com>
Signed-off-by: Herbert Xu <herbert(a)gondor.apana.org.au>
Signed-off-by: Greg Kroah-Hartman <gregkh(a)linuxfoundation.org>
---
crypto/rsa_helper.c | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
--- a/crypto/rsa_helper.c
+++ b/crypto/rsa_helper.c
@@ -30,7 +30,7 @@ int rsa_get_n(void *context, size_t hdrl
return -EINVAL;
if (fips_enabled) {
- while (!*ptr && n_sz) {
+ while (n_sz && !*ptr) {
ptr++;
n_sz--;
}
Patches currently in stable-queue which might be from ebiggers(a)google.com are
queue-4.9/crypto-salsa20-fix-blkcipher_walk-api-usage.patch
queue-4.9/crypto-rsa-fix-buffer-overread-when-stripping-leading-zeroes.patch
queue-4.9/crypto-hmac-require-that-the-underlying-hash-algorithm-is-unkeyed.patch
This is a note to let you know that I've just added the patch titled
crypto: hmac - require that the underlying hash algorithm is unkeyed
to the 4.9-stable tree which can be found at:
http://www.kernel.org/git/?p=linux/kernel/git/stable/stable-queue.git;a=sum…
The filename of the patch is:
crypto-hmac-require-that-the-underlying-hash-algorithm-is-unkeyed.patch
and it can be found in the queue-4.9 subdirectory.
If you, or anyone else, feels it should not be added to the stable tree,
please let <stable(a)vger.kernel.org> know about it.
>From af3ff8045bbf3e32f1a448542e73abb4c8ceb6f1 Mon Sep 17 00:00:00 2001
From: Eric Biggers <ebiggers(a)google.com>
Date: Tue, 28 Nov 2017 18:01:38 -0800
Subject: crypto: hmac - require that the underlying hash algorithm is unkeyed
From: Eric Biggers <ebiggers(a)google.com>
commit af3ff8045bbf3e32f1a448542e73abb4c8ceb6f1 upstream.
Because the HMAC template didn't check that its underlying hash
algorithm is unkeyed, trying to use "hmac(hmac(sha3-512-generic))"
through AF_ALG or through KEYCTL_DH_COMPUTE resulted in the inner HMAC
being used without having been keyed, resulting in sha3_update() being
called without sha3_init(), causing a stack buffer overflow.
This is a very old bug, but it seems to have only started causing real
problems when SHA-3 support was added (requires CONFIG_CRYPTO_SHA3)
because the innermost hash's state is ->import()ed from a zeroed buffer,
and it just so happens that other hash algorithms are fine with that,
but SHA-3 is not. However, there could be arch or hardware-dependent
hash algorithms also affected; I couldn't test everything.
Fix the bug by introducing a function crypto_shash_alg_has_setkey()
which tests whether a shash algorithm is keyed. Then update the HMAC
template to require that its underlying hash algorithm is unkeyed.
Here is a reproducer:
#include <linux/if_alg.h>
#include <sys/socket.h>
int main()
{
int algfd;
struct sockaddr_alg addr = {
.salg_type = "hash",
.salg_name = "hmac(hmac(sha3-512-generic))",
};
char key[4096] = { 0 };
algfd = socket(AF_ALG, SOCK_SEQPACKET, 0);
bind(algfd, (const struct sockaddr *)&addr, sizeof(addr));
setsockopt(algfd, SOL_ALG, ALG_SET_KEY, key, sizeof(key));
}
Here was the KASAN report from syzbot:
BUG: KASAN: stack-out-of-bounds in memcpy include/linux/string.h:341 [inline]
BUG: KASAN: stack-out-of-bounds in sha3_update+0xdf/0x2e0 crypto/sha3_generic.c:161
Write of size 4096 at addr ffff8801cca07c40 by task syzkaller076574/3044
CPU: 1 PID: 3044 Comm: syzkaller076574 Not tainted 4.14.0-mm1+ #25
Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 01/01/2011
Call Trace:
__dump_stack lib/dump_stack.c:17 [inline]
dump_stack+0x194/0x257 lib/dump_stack.c:53
print_address_description+0x73/0x250 mm/kasan/report.c:252
kasan_report_error mm/kasan/report.c:351 [inline]
kasan_report+0x25b/0x340 mm/kasan/report.c:409
check_memory_region_inline mm/kasan/kasan.c:260 [inline]
check_memory_region+0x137/0x190 mm/kasan/kasan.c:267
memcpy+0x37/0x50 mm/kasan/kasan.c:303
memcpy include/linux/string.h:341 [inline]
sha3_update+0xdf/0x2e0 crypto/sha3_generic.c:161
crypto_shash_update+0xcb/0x220 crypto/shash.c:109
shash_finup_unaligned+0x2a/0x60 crypto/shash.c:151
crypto_shash_finup+0xc4/0x120 crypto/shash.c:165
hmac_finup+0x182/0x330 crypto/hmac.c:152
crypto_shash_finup+0xc4/0x120 crypto/shash.c:165
shash_digest_unaligned+0x9e/0xd0 crypto/shash.c:172
crypto_shash_digest+0xc4/0x120 crypto/shash.c:186
hmac_setkey+0x36a/0x690 crypto/hmac.c:66
crypto_shash_setkey+0xad/0x190 crypto/shash.c:64
shash_async_setkey+0x47/0x60 crypto/shash.c:207
crypto_ahash_setkey+0xaf/0x180 crypto/ahash.c:200
hash_setkey+0x40/0x90 crypto/algif_hash.c:446
alg_setkey crypto/af_alg.c:221 [inline]
alg_setsockopt+0x2a1/0x350 crypto/af_alg.c:254
SYSC_setsockopt net/socket.c:1851 [inline]
SyS_setsockopt+0x189/0x360 net/socket.c:1830
entry_SYSCALL_64_fastpath+0x1f/0x96
Reported-by: syzbot <syzkaller(a)googlegroups.com>
Signed-off-by: Eric Biggers <ebiggers(a)google.com>
Signed-off-by: Herbert Xu <herbert(a)gondor.apana.org.au>
Signed-off-by: Greg Kroah-Hartman <gregkh(a)linuxfoundation.org>
---
crypto/hmac.c | 6 +++++-
crypto/shash.c | 5 +++--
include/crypto/internal/hash.h | 8 ++++++++
3 files changed, 16 insertions(+), 3 deletions(-)
--- a/crypto/hmac.c
+++ b/crypto/hmac.c
@@ -194,11 +194,15 @@ static int hmac_create(struct crypto_tem
salg = shash_attr_alg(tb[1], 0, 0);
if (IS_ERR(salg))
return PTR_ERR(salg);
+ alg = &salg->base;
+ /* The underlying hash algorithm must be unkeyed */
err = -EINVAL;
+ if (crypto_shash_alg_has_setkey(salg))
+ goto out_put_alg;
+
ds = salg->digestsize;
ss = salg->statesize;
- alg = &salg->base;
if (ds > alg->cra_blocksize ||
ss < alg->cra_blocksize)
goto out_put_alg;
--- a/crypto/shash.c
+++ b/crypto/shash.c
@@ -24,11 +24,12 @@
static const struct crypto_type crypto_shash_type;
-static int shash_no_setkey(struct crypto_shash *tfm, const u8 *key,
- unsigned int keylen)
+int shash_no_setkey(struct crypto_shash *tfm, const u8 *key,
+ unsigned int keylen)
{
return -ENOSYS;
}
+EXPORT_SYMBOL_GPL(shash_no_setkey);
static int shash_setkey_unaligned(struct crypto_shash *tfm, const u8 *key,
unsigned int keylen)
--- a/include/crypto/internal/hash.h
+++ b/include/crypto/internal/hash.h
@@ -80,6 +80,14 @@ int ahash_register_instance(struct crypt
struct ahash_instance *inst);
void ahash_free_instance(struct crypto_instance *inst);
+int shash_no_setkey(struct crypto_shash *tfm, const u8 *key,
+ unsigned int keylen);
+
+static inline bool crypto_shash_alg_has_setkey(struct shash_alg *alg)
+{
+ return alg->setkey != shash_no_setkey;
+}
+
int crypto_init_ahash_spawn(struct crypto_ahash_spawn *spawn,
struct hash_alg_common *alg,
struct crypto_instance *inst);
Patches currently in stable-queue which might be from ebiggers(a)google.com are
queue-4.9/crypto-salsa20-fix-blkcipher_walk-api-usage.patch
queue-4.9/crypto-rsa-fix-buffer-overread-when-stripping-leading-zeroes.patch
queue-4.9/crypto-hmac-require-that-the-underlying-hash-algorithm-is-unkeyed.patch
This is a note to let you know that I've just added the patch titled
crypto: salsa20 - fix blkcipher_walk API usage
to the 4.4-stable tree which can be found at:
http://www.kernel.org/git/?p=linux/kernel/git/stable/stable-queue.git;a=sum…
The filename of the patch is:
crypto-salsa20-fix-blkcipher_walk-api-usage.patch
and it can be found in the queue-4.4 subdirectory.
If you, or anyone else, feels it should not be added to the stable tree,
please let <stable(a)vger.kernel.org> know about it.
>From ecaaab5649781c5a0effdaf298a925063020500e Mon Sep 17 00:00:00 2001
From: Eric Biggers <ebiggers(a)google.com>
Date: Tue, 28 Nov 2017 20:56:59 -0800
Subject: crypto: salsa20 - fix blkcipher_walk API usage
From: Eric Biggers <ebiggers(a)google.com>
commit ecaaab5649781c5a0effdaf298a925063020500e upstream.
When asked to encrypt or decrypt 0 bytes, both the generic and x86
implementations of Salsa20 crash in blkcipher_walk_done(), either when
doing 'kfree(walk->buffer)' or 'free_page((unsigned long)walk->page)',
because walk->buffer and walk->page have not been initialized.
The bug is that Salsa20 is calling blkcipher_walk_done() even when
nothing is in 'walk.nbytes'. But blkcipher_walk_done() is only meant to
be called when a nonzero number of bytes have been provided.
The broken code is part of an optimization that tries to make only one
call to salsa20_encrypt_bytes() to process inputs that are not evenly
divisible by 64 bytes. To fix the bug, just remove this "optimization"
and use the blkcipher_walk API the same way all the other users do.
Reproducer:
#include <linux/if_alg.h>
#include <sys/socket.h>
#include <unistd.h>
int main()
{
int algfd, reqfd;
struct sockaddr_alg addr = {
.salg_type = "skcipher",
.salg_name = "salsa20",
};
char key[16] = { 0 };
algfd = socket(AF_ALG, SOCK_SEQPACKET, 0);
bind(algfd, (void *)&addr, sizeof(addr));
reqfd = accept(algfd, 0, 0);
setsockopt(algfd, SOL_ALG, ALG_SET_KEY, key, sizeof(key));
read(reqfd, key, sizeof(key));
}
Reported-by: syzbot <syzkaller(a)googlegroups.com>
Fixes: eb6f13eb9f81 ("[CRYPTO] salsa20_generic: Fix multi-page processing")
Signed-off-by: Eric Biggers <ebiggers(a)google.com>
Signed-off-by: Herbert Xu <herbert(a)gondor.apana.org.au>
Signed-off-by: Greg Kroah-Hartman <gregkh(a)linuxfoundation.org>
---
arch/x86/crypto/salsa20_glue.c | 7 -------
crypto/salsa20_generic.c | 7 -------
2 files changed, 14 deletions(-)
--- a/arch/x86/crypto/salsa20_glue.c
+++ b/arch/x86/crypto/salsa20_glue.c
@@ -59,13 +59,6 @@ static int encrypt(struct blkcipher_desc
salsa20_ivsetup(ctx, walk.iv);
- if (likely(walk.nbytes == nbytes))
- {
- salsa20_encrypt_bytes(ctx, walk.src.virt.addr,
- walk.dst.virt.addr, nbytes);
- return blkcipher_walk_done(desc, &walk, 0);
- }
-
while (walk.nbytes >= 64) {
salsa20_encrypt_bytes(ctx, walk.src.virt.addr,
walk.dst.virt.addr,
--- a/crypto/salsa20_generic.c
+++ b/crypto/salsa20_generic.c
@@ -188,13 +188,6 @@ static int encrypt(struct blkcipher_desc
salsa20_ivsetup(ctx, walk.iv);
- if (likely(walk.nbytes == nbytes))
- {
- salsa20_encrypt_bytes(ctx, walk.dst.virt.addr,
- walk.src.virt.addr, nbytes);
- return blkcipher_walk_done(desc, &walk, 0);
- }
-
while (walk.nbytes >= 64) {
salsa20_encrypt_bytes(ctx, walk.dst.virt.addr,
walk.src.virt.addr,
Patches currently in stable-queue which might be from ebiggers(a)google.com are
queue-4.4/crypto-salsa20-fix-blkcipher_walk-api-usage.patch
queue-4.4/crypto-hmac-require-that-the-underlying-hash-algorithm-is-unkeyed.patch
This is a note to let you know that I've just added the patch titled
crypto: hmac - require that the underlying hash algorithm is unkeyed
to the 4.4-stable tree which can be found at:
http://www.kernel.org/git/?p=linux/kernel/git/stable/stable-queue.git;a=sum…
The filename of the patch is:
crypto-hmac-require-that-the-underlying-hash-algorithm-is-unkeyed.patch
and it can be found in the queue-4.4 subdirectory.
If you, or anyone else, feels it should not be added to the stable tree,
please let <stable(a)vger.kernel.org> know about it.
>From af3ff8045bbf3e32f1a448542e73abb4c8ceb6f1 Mon Sep 17 00:00:00 2001
From: Eric Biggers <ebiggers(a)google.com>
Date: Tue, 28 Nov 2017 18:01:38 -0800
Subject: crypto: hmac - require that the underlying hash algorithm is unkeyed
From: Eric Biggers <ebiggers(a)google.com>
commit af3ff8045bbf3e32f1a448542e73abb4c8ceb6f1 upstream.
Because the HMAC template didn't check that its underlying hash
algorithm is unkeyed, trying to use "hmac(hmac(sha3-512-generic))"
through AF_ALG or through KEYCTL_DH_COMPUTE resulted in the inner HMAC
being used without having been keyed, resulting in sha3_update() being
called without sha3_init(), causing a stack buffer overflow.
This is a very old bug, but it seems to have only started causing real
problems when SHA-3 support was added (requires CONFIG_CRYPTO_SHA3)
because the innermost hash's state is ->import()ed from a zeroed buffer,
and it just so happens that other hash algorithms are fine with that,
but SHA-3 is not. However, there could be arch or hardware-dependent
hash algorithms also affected; I couldn't test everything.
Fix the bug by introducing a function crypto_shash_alg_has_setkey()
which tests whether a shash algorithm is keyed. Then update the HMAC
template to require that its underlying hash algorithm is unkeyed.
Here is a reproducer:
#include <linux/if_alg.h>
#include <sys/socket.h>
int main()
{
int algfd;
struct sockaddr_alg addr = {
.salg_type = "hash",
.salg_name = "hmac(hmac(sha3-512-generic))",
};
char key[4096] = { 0 };
algfd = socket(AF_ALG, SOCK_SEQPACKET, 0);
bind(algfd, (const struct sockaddr *)&addr, sizeof(addr));
setsockopt(algfd, SOL_ALG, ALG_SET_KEY, key, sizeof(key));
}
Here was the KASAN report from syzbot:
BUG: KASAN: stack-out-of-bounds in memcpy include/linux/string.h:341 [inline]
BUG: KASAN: stack-out-of-bounds in sha3_update+0xdf/0x2e0 crypto/sha3_generic.c:161
Write of size 4096 at addr ffff8801cca07c40 by task syzkaller076574/3044
CPU: 1 PID: 3044 Comm: syzkaller076574 Not tainted 4.14.0-mm1+ #25
Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 01/01/2011
Call Trace:
__dump_stack lib/dump_stack.c:17 [inline]
dump_stack+0x194/0x257 lib/dump_stack.c:53
print_address_description+0x73/0x250 mm/kasan/report.c:252
kasan_report_error mm/kasan/report.c:351 [inline]
kasan_report+0x25b/0x340 mm/kasan/report.c:409
check_memory_region_inline mm/kasan/kasan.c:260 [inline]
check_memory_region+0x137/0x190 mm/kasan/kasan.c:267
memcpy+0x37/0x50 mm/kasan/kasan.c:303
memcpy include/linux/string.h:341 [inline]
sha3_update+0xdf/0x2e0 crypto/sha3_generic.c:161
crypto_shash_update+0xcb/0x220 crypto/shash.c:109
shash_finup_unaligned+0x2a/0x60 crypto/shash.c:151
crypto_shash_finup+0xc4/0x120 crypto/shash.c:165
hmac_finup+0x182/0x330 crypto/hmac.c:152
crypto_shash_finup+0xc4/0x120 crypto/shash.c:165
shash_digest_unaligned+0x9e/0xd0 crypto/shash.c:172
crypto_shash_digest+0xc4/0x120 crypto/shash.c:186
hmac_setkey+0x36a/0x690 crypto/hmac.c:66
crypto_shash_setkey+0xad/0x190 crypto/shash.c:64
shash_async_setkey+0x47/0x60 crypto/shash.c:207
crypto_ahash_setkey+0xaf/0x180 crypto/ahash.c:200
hash_setkey+0x40/0x90 crypto/algif_hash.c:446
alg_setkey crypto/af_alg.c:221 [inline]
alg_setsockopt+0x2a1/0x350 crypto/af_alg.c:254
SYSC_setsockopt net/socket.c:1851 [inline]
SyS_setsockopt+0x189/0x360 net/socket.c:1830
entry_SYSCALL_64_fastpath+0x1f/0x96
Reported-by: syzbot <syzkaller(a)googlegroups.com>
Signed-off-by: Eric Biggers <ebiggers(a)google.com>
Signed-off-by: Herbert Xu <herbert(a)gondor.apana.org.au>
Signed-off-by: Greg Kroah-Hartman <gregkh(a)linuxfoundation.org>
---
crypto/hmac.c | 6 +++++-
crypto/shash.c | 5 +++--
include/crypto/internal/hash.h | 8 ++++++++
3 files changed, 16 insertions(+), 3 deletions(-)
--- a/crypto/hmac.c
+++ b/crypto/hmac.c
@@ -194,11 +194,15 @@ static int hmac_create(struct crypto_tem
salg = shash_attr_alg(tb[1], 0, 0);
if (IS_ERR(salg))
return PTR_ERR(salg);
+ alg = &salg->base;
+ /* The underlying hash algorithm must be unkeyed */
err = -EINVAL;
+ if (crypto_shash_alg_has_setkey(salg))
+ goto out_put_alg;
+
ds = salg->digestsize;
ss = salg->statesize;
- alg = &salg->base;
if (ds > alg->cra_blocksize ||
ss < alg->cra_blocksize)
goto out_put_alg;
--- a/crypto/shash.c
+++ b/crypto/shash.c
@@ -24,11 +24,12 @@
static const struct crypto_type crypto_shash_type;
-static int shash_no_setkey(struct crypto_shash *tfm, const u8 *key,
- unsigned int keylen)
+int shash_no_setkey(struct crypto_shash *tfm, const u8 *key,
+ unsigned int keylen)
{
return -ENOSYS;
}
+EXPORT_SYMBOL_GPL(shash_no_setkey);
static int shash_setkey_unaligned(struct crypto_shash *tfm, const u8 *key,
unsigned int keylen)
--- a/include/crypto/internal/hash.h
+++ b/include/crypto/internal/hash.h
@@ -83,6 +83,14 @@ int ahash_register_instance(struct crypt
struct ahash_instance *inst);
void ahash_free_instance(struct crypto_instance *inst);
+int shash_no_setkey(struct crypto_shash *tfm, const u8 *key,
+ unsigned int keylen);
+
+static inline bool crypto_shash_alg_has_setkey(struct shash_alg *alg)
+{
+ return alg->setkey != shash_no_setkey;
+}
+
int crypto_init_ahash_spawn(struct crypto_ahash_spawn *spawn,
struct hash_alg_common *alg,
struct crypto_instance *inst);
Patches currently in stable-queue which might be from ebiggers(a)google.com are
queue-4.4/crypto-salsa20-fix-blkcipher_walk-api-usage.patch
queue-4.4/crypto-hmac-require-that-the-underlying-hash-algorithm-is-unkeyed.patch
This is a note to let you know that I've just added the patch titled
string.h: workaround for increased stack usage
to the 4.14-stable tree which can be found at:
http://www.kernel.org/git/?p=linux/kernel/git/stable/stable-queue.git;a=sum…
The filename of the patch is:
string.h-workaround-for-increased-stack-usage.patch
and it can be found in the queue-4.14 subdirectory.
If you, or anyone else, feels it should not be added to the stable tree,
please let <stable(a)vger.kernel.org> know about it.
>From 146734b091430c80d80bb96b1139a96fb4bc830e Mon Sep 17 00:00:00 2001
From: Arnd Bergmann <arnd(a)arndb.de>
Date: Thu, 14 Dec 2017 15:32:34 -0800
Subject: string.h: workaround for increased stack usage
From: Arnd Bergmann <arnd(a)arndb.de>
commit 146734b091430c80d80bb96b1139a96fb4bc830e upstream.
The hardened strlen() function causes rather large stack usage in at
least one file in the kernel, in particular when CONFIG_KASAN is
enabled:
drivers/media/usb/em28xx/em28xx-dvb.c: In function 'em28xx_dvb_init':
drivers/media/usb/em28xx/em28xx-dvb.c:2062:1: error: the frame size of 3256 bytes is larger than 204 bytes [-Werror=frame-larger-than=]
Analyzing this problem led to the discovery that gcc fails to merge the
stack slots for the i2c_board_info[] structures after we strlcpy() into
them, due to the 'noreturn' attribute on the source string length check.
I reported this as a gcc bug, but it is unlikely to get fixed for gcc-8,
since it is relatively easy to work around, and it gets triggered
rarely. An earlier workaround I did added an empty inline assembly
statement before the call to fortify_panic(), which works surprisingly
well, but is really ugly and unintuitive.
This is a new approach to the same problem, this time addressing it by
not calling the 'extern __real_strnlen()' function for string constants
where __builtin_strlen() is a compile-time constant and therefore known
to be safe.
We do this by checking if the last character in the string is a
compile-time constant '\0'. If it is, we can assume that strlen() of
the string is also constant.
As a side-effect, this should also improve the object code output for
any other call of strlen() on a string constant.
[akpm(a)linux-foundation.org: add comment]
Link: http://lkml.kernel.org/r/20171205215143.3085755-1-arnd@arndb.de
Link: https://gcc.gnu.org/bugzilla/show_bug.cgi?id=82365
Link: https://patchwork.kernel.org/patch/9980413/
Link: https://patchwork.kernel.org/patch/9974047/
Fixes: 6974f0c4555 ("include/linux/string.h: add the option of fortified string.h functions")
Signed-off-by: Arnd Bergmann <arnd(a)arndb.de>
Cc: Kees Cook <keescook(a)chromium.org>
Cc: Mauro Carvalho Chehab <mchehab(a)kernel.org>
Cc: Dmitry Vyukov <dvyukov(a)google.com>
Cc: Alexander Potapenko <glider(a)google.com>
Cc: Andrey Ryabinin <aryabinin(a)virtuozzo.com>
Cc: Daniel Micay <danielmicay(a)gmail.com>
Cc: Greg Kroah-Hartman <gregkh(a)linuxfoundation.org>
Cc: Martin Wilck <mwilck(a)suse.com>
Cc: Dan Williams <dan.j.williams(a)intel.com>
Signed-off-by: Andrew Morton <akpm(a)linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds(a)linux-foundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh(a)linuxfoundation.org>
---
include/linux/string.h | 5 ++++-
1 file changed, 4 insertions(+), 1 deletion(-)
--- a/include/linux/string.h
+++ b/include/linux/string.h
@@ -259,7 +259,10 @@ __FORTIFY_INLINE __kernel_size_t strlen(
{
__kernel_size_t ret;
size_t p_size = __builtin_object_size(p, 0);
- if (p_size == (size_t)-1)
+
+ /* Work around gcc excess stack consumption issue */
+ if (p_size == (size_t)-1 ||
+ (__builtin_constant_p(p[p_size - 1]) && p[p_size - 1] == '\0'))
return __builtin_strlen(p);
ret = strnlen(p, p_size);
if (p_size <= ret)
Patches currently in stable-queue which might be from arnd(a)arndb.de are
queue-4.14/string.h-workaround-for-increased-stack-usage.patch