- Linux-stable-mirror - lists.linaro.org

Patch "rtlwifi: rtl_pci: Fix the bug when inactiveps is enabled." has been added to the 4.9-stable tree

by gregkh＠linuxfoundation.org

This is a note to let you know that I've just added the patch titled rtlwifi: rtl_pci: Fix the bug when inactiveps is enabled. to the 4.9-stable tree which can be found at: http://www.kernel.org/git/?p=linux/kernel/git/stable/stable-queue.git;a=sum… The filename of the patch is: rtlwifi-rtl_pci-fix-the-bug-when-inactiveps-is-enabled.patch and it can be found in the queue-4.9 subdirectory. If you, or anyone else, feels it should not be added to the stable tree, please let <stable(a)vger.kernel.org> know about it. >From foo@baz Thu Mar 22 14:40:24 CET 2018 From: Tsang-Shian Lin <thlin(a)realtek.com> Date: Sat, 9 Dec 2017 11:37:10 -0600 Subject: rtlwifi: rtl_pci: Fix the bug when inactiveps is enabled. From: Tsang-Shian Lin <thlin(a)realtek.com> [ Upstream commit b7573a0a27bfa8270dea9b145448f6884b7cacc1 ] Reset the driver current tx read/write index to zero when inactiveps nic out of sync with HW state. Wrong driver tx read/write index will cause Tx fail. Signed-off-by: Tsang-Shian Lin <thlin(a)realtek.com> Signed-off-by: Ping-Ke Shih <pkshih(a)realtek.com> Signed-off-by: Larry Finger <Larry.Finger(a)lwfinger.net> Cc: Yan-Hsuan Chuang <yhchuang(a)realtek.com> Cc: Birming Chiu <birming(a)realtek.com> Cc: Shaofu <shaofu(a)realtek.com> Cc: Steven Ting <steventing(a)realtek.com> Signed-off-by: Kalle Valo <kvalo(a)codeaurora.org> Signed-off-by: Sasha Levin <alexander.levin(a)microsoft.com> Signed-off-by: Greg Kroah-Hartman <gregkh(a)linuxfoundation.org> --- drivers/net/wireless/realtek/rtlwifi/pci.c | 7 +++++++ 1 file changed, 7 insertions(+) --- a/drivers/net/wireless/realtek/rtlwifi/pci.c +++ b/drivers/net/wireless/realtek/rtlwifi/pci.c @@ -1572,7 +1572,14 @@ int rtl_pci_reset_trx_ring(struct ieee80 dev_kfree_skb_irq(skb); ring->idx = (ring->idx + 1) % ring->entries; } + + if (rtlpriv->use_new_trx_flow) { + rtlpci->tx_ring[i].cur_tx_rp = 0; + rtlpci->tx_ring[i].cur_tx_wp = 0; + } + ring->idx = 0; + ring->entries = rtlpci->txringcount[i]; } } spin_unlock_irqrestore(&rtlpriv->locks.irq_th_lock, flags); Patches currently in stable-queue which might be from thlin(a)realtek.com are queue-4.9/rtlwifi-rtl_pci-fix-the-bug-when-inactiveps-is-enabled.patch

7 years, 5 months

1
0
0 0

Patch "rtc: ds1374: wdt: Fix stop/start ioctl always returning -EINVAL" has been added to the 4.9-stable tree

by gregkh＠linuxfoundation.org

This is a note to let you know that I've just added the patch titled rtc: ds1374: wdt: Fix stop/start ioctl always returning -EINVAL to the 4.9-stable tree which can be found at: http://www.kernel.org/git/?p=linux/kernel/git/stable/stable-queue.git;a=sum… The filename of the patch is: rtc-ds1374-wdt-fix-stop-start-ioctl-always-returning-einval.patch and it can be found in the queue-4.9 subdirectory. If you, or anyone else, feels it should not be added to the stable tree, please let <stable(a)vger.kernel.org> know about it. >From foo@baz Thu Mar 22 14:40:24 CET 2018 From: Moritz Fischer <mdf(a)kernel.org> Date: Mon, 24 Apr 2017 15:05:12 -0700 Subject: rtc: ds1374: wdt: Fix stop/start ioctl always returning -EINVAL From: Moritz Fischer <mdf(a)kernel.org> [ Upstream commit 538c08f4c89580fc644e2bc64e0a4b86c925da4e ] The WDIOC_SETOPTIONS case in the watchdog ioctl would alwayss falls through to the -EINVAL case. This is wrong since thew watchdog does actually get stopped or started correctly. Fixes: 920f91e50c5b ("drivers/rtc/rtc-ds1374.c: add watchdog support") Signed-off-by: Moritz Fischer <mdf(a)kernel.org> Signed-off-by: Alexandre Belloni <alexandre.belloni(a)free-electrons.com> Signed-off-by: Sasha Levin <alexander.levin(a)microsoft.com> Signed-off-by: Greg Kroah-Hartman <gregkh(a)linuxfoundation.org> --- drivers/rtc/rtc-ds1374.c | 3 ++- 1 file changed, 2 insertions(+), 1 deletion(-) --- a/drivers/rtc/rtc-ds1374.c +++ b/drivers/rtc/rtc-ds1374.c @@ -548,14 +548,15 @@ static long ds1374_wdt_ioctl(struct file if (options & WDIOS_DISABLECARD) { pr_info("disable watchdog\n"); ds1374_wdt_disable(); + return 0; } if (options & WDIOS_ENABLECARD) { pr_info("enable watchdog\n"); ds1374_wdt_settimeout(wdt_margin); ds1374_wdt_ping(); + return 0; } - return -EINVAL; } return -ENOTTY; Patches currently in stable-queue which might be from mdf(a)kernel.org are queue-4.9/rtc-ds1374-wdt-fix-stop-start-ioctl-always-returning-einval.patch queue-4.9/rtc-ds1374-wdt-fix-issue-with-timeout-scaling-from-secs-to-wdt-ticks.patch

7 years, 5 months

1
0
0 0

Patch "rtc: ds1374: wdt: Fix issue with timeout scaling from secs to wdt ticks" has been added to the 4.9-stable tree

by gregkh＠linuxfoundation.org

This is a note to let you know that I've just added the patch titled rtc: ds1374: wdt: Fix issue with timeout scaling from secs to wdt ticks to the 4.9-stable tree which can be found at: http://www.kernel.org/git/?p=linux/kernel/git/stable/stable-queue.git;a=sum… The filename of the patch is: rtc-ds1374-wdt-fix-issue-with-timeout-scaling-from-secs-to-wdt-ticks.patch and it can be found in the queue-4.9 subdirectory. If you, or anyone else, feels it should not be added to the stable tree, please let <stable(a)vger.kernel.org> know about it. >From foo@baz Thu Mar 22 14:40:24 CET 2018 From: Moritz Fischer <mdf(a)kernel.org> Date: Mon, 24 Apr 2017 15:05:11 -0700 Subject: rtc: ds1374: wdt: Fix issue with timeout scaling from secs to wdt ticks From: Moritz Fischer <mdf(a)kernel.org> [ Upstream commit 453d0744f6c6ca3f9749b8c57c2e85b5b9f52514 ] The issue is that the internal counter that triggers the watchdog reset is actually running at 4096 Hz instead of 1Hz, therefore the value given by userland (in sec) needs to be multiplied by 4096 to get the correct behavior. Fixes: 920f91e50c5b ("drivers/rtc/rtc-ds1374.c: add watchdog support") Signed-off-by: Moritz Fischer <mdf(a)kernel.org> Signed-off-by: Alexandre Belloni <alexandre.belloni(a)free-electrons.com> Signed-off-by: Sasha Levin <alexander.levin(a)microsoft.com> Signed-off-by: Greg Kroah-Hartman <gregkh(a)linuxfoundation.org> --- drivers/rtc/rtc-ds1374.c | 7 ++++++- 1 file changed, 6 insertions(+), 1 deletion(-) --- a/drivers/rtc/rtc-ds1374.c +++ b/drivers/rtc/rtc-ds1374.c @@ -527,6 +527,10 @@ static long ds1374_wdt_ioctl(struct file if (get_user(new_margin, (int __user *)arg)) return -EFAULT; + /* the hardware's tick rate is 4096 Hz, so + * the counter value needs to be scaled accordingly + */ + new_margin <<= 12; if (new_margin < 1 || new_margin > 16777216) return -EINVAL; @@ -535,7 +539,8 @@ static long ds1374_wdt_ioctl(struct file ds1374_wdt_ping(); /* fallthrough */ case WDIOC_GETTIMEOUT: - return put_user(wdt_margin, (int __user *)arg); + /* when returning ... inverse is true */ + return put_user((wdt_margin >> 12), (int __user *)arg); case WDIOC_SETOPTIONS: if (copy_from_user(&options, (int __user *)arg, sizeof(int))) return -EFAULT; Patches currently in stable-queue which might be from mdf(a)kernel.org are queue-4.9/rtc-ds1374-wdt-fix-stop-start-ioctl-always-returning-einval.patch queue-4.9/rtc-ds1374-wdt-fix-issue-with-timeout-scaling-from-secs-to-wdt-ticks.patch

7 years, 5 months

1
0
0 0

Patch "rtc: cmos: Do not assume irq 8 for rtc when there are no legacy irqs" has been added to the 4.9-stable tree

by gregkh＠linuxfoundation.org

This is a note to let you know that I've just added the patch titled rtc: cmos: Do not assume irq 8 for rtc when there are no legacy irqs to the 4.9-stable tree which can be found at: http://www.kernel.org/git/?p=linux/kernel/git/stable/stable-queue.git;a=sum… The filename of the patch is: rtc-cmos-do-not-assume-irq-8-for-rtc-when-there-are-no-legacy-irqs.patch and it can be found in the queue-4.9 subdirectory. If you, or anyone else, feels it should not be added to the stable tree, please let <stable(a)vger.kernel.org> know about it. >From foo@baz Thu Mar 22 14:40:23 CET 2018 From: Hans de Goede <hdegoede(a)redhat.com> Date: Sat, 18 Mar 2017 14:45:49 +0100 Subject: rtc: cmos: Do not assume irq 8 for rtc when there are no legacy irqs From: Hans de Goede <hdegoede(a)redhat.com> [ Upstream commit a1e23a42f1bdc00e32fc4869caef12e4e6272f26 ] On some systems (e.g. Intel Bay Trail systems) the legacy PIC is not used, in this case virq 8 will be a random irq, rather then hw_irq 8 from the PIC. Requesting virq 8 in this case will not help us to get alarm irqs and may cause problems for other drivers which actually do need virq 8, for example on an Asus Transformer T100TA this leads to: [ 28.745155] genirq: Flags mismatch irq 8. 00000088 (mmc0) vs. 00000080 (rtc0) <snip oops> [ 28.753700] mmc0: Failed to request IRQ 8: -16 [ 28.975934] sdhci-acpi: probe of 80860F14:01 failed with error -16 This commit fixes this by making the rtc-cmos driver continue without using an irq rather then claiming irq 8 when no irq is specified in the pnp-info and there are no legacy-irqs. Signed-off-by: Hans de Goede <hdegoede(a)redhat.com> Signed-off-by: Alexandre Belloni <alexandre.belloni(a)free-electrons.com> Signed-off-by: Sasha Levin <alexander.levin(a)microsoft.com> Signed-off-by: Greg Kroah-Hartman <gregkh(a)linuxfoundation.org> --- drivers/rtc/rtc-cmos.c | 17 +++++++++++++---- 1 file changed, 13 insertions(+), 4 deletions(-) --- a/drivers/rtc/rtc-cmos.c +++ b/drivers/rtc/rtc-cmos.c @@ -41,6 +41,9 @@ #include <linux/pm.h> #include <linux/of.h> #include <linux/of_platform.h> +#ifdef CONFIG_X86 +#include <asm/i8259.h> +#endif /* this is for "generic access to PC-style RTC" using CMOS_READ/CMOS_WRITE */ #include <linux/mc146818rtc.h> @@ -1117,17 +1120,23 @@ static int cmos_pnp_probe(struct pnp_dev { cmos_wake_setup(&pnp->dev); - if (pnp_port_start(pnp, 0) == 0x70 && !pnp_irq_valid(pnp, 0)) + if (pnp_port_start(pnp, 0) == 0x70 && !pnp_irq_valid(pnp, 0)) { + unsigned int irq = 0; +#ifdef CONFIG_X86 /* Some machines contain a PNP entry for the RTC, but * don't define the IRQ. It should always be safe to - * hardcode it in these cases + * hardcode it on systems with a legacy PIC. */ + if (nr_legacy_irqs()) + irq = 8; +#endif return cmos_do_probe(&pnp->dev, - pnp_get_resource(pnp, IORESOURCE_IO, 0), 8); - else + pnp_get_resource(pnp, IORESOURCE_IO, 0), irq); + } else { return cmos_do_probe(&pnp->dev, pnp_get_resource(pnp, IORESOURCE_IO, 0), pnp_irq(pnp, 0)); + } } static void cmos_pnp_remove(struct pnp_dev *pnp) Patches currently in stable-queue which might be from hdegoede(a)redhat.com are queue-4.9/power-supply-bq24190_charger-limit-over-under-voltage-fault-logging.patch queue-4.9/acpi-pmic-xpower-fix-power_table-addresses.patch queue-4.9/acpi-power-delay-turning-off-unused-power-resources-after-suspend.patch queue-4.9/rtc-cmos-do-not-assume-irq-8-for-rtc-when-there-are-no-legacy-irqs.patch queue-4.9/genirq-use-irqd_get_trigger_type-to-compare-the-trigger-type-for-shared-irqs.patch queue-4.9/power-supply-bq24190_charger-add-disable-reset-device-property.patch queue-4.9/x86-i8259-export-legacy_pic-symbol.patch

7 years, 5 months

1
0
0 0

Patch "rtc: ac100: Fix multiple race conditions" has been added to the 4.9-stable tree

by gregkh＠linuxfoundation.org

This is a note to let you know that I've just added the patch titled rtc: ac100: Fix multiple race conditions to the 4.9-stable tree which can be found at: http://www.kernel.org/git/?p=linux/kernel/git/stable/stable-queue.git;a=sum… The filename of the patch is: rtc-ac100-fix-multiple-race-conditions.patch and it can be found in the queue-4.9 subdirectory. If you, or anyone else, feels it should not be added to the stable tree, please let <stable(a)vger.kernel.org> know about it. >From foo@baz Thu Mar 22 14:40:24 CET 2018 From: Alexandre Belloni <alexandre.belloni(a)free-electrons.com> Date: Mon, 4 Dec 2017 14:58:33 +0100 Subject: rtc: ac100: Fix multiple race conditions From: Alexandre Belloni <alexandre.belloni(a)free-electrons.com> [ Upstream commit 994ec64c0a193940be7a6fd074668b9446d3b6c3 ] The probe function is not allowed to fail after registering the RTC because the following may happen: CPU0: CPU1: sys_load_module() do_init_module() do_one_initcall() cmos_do_probe() rtc_device_register() __register_chrdev() cdev->owner = struct module* open("/dev/rtc0") rtc_device_unregister() module_put() free_module() module_free(mod->module_core) /* struct module *module is now freed */ chrdev_open() spin_lock(cdev_lock) cdev_get() try_module_get() module_is_live() /* dereferences already freed struct module* */ Also, the interrupt handler: ac100_rtc_irq() is dereferencing chip->rtc but this may still be NULL when it is called, resulting in: Unable to handle kernel NULL pointer dereference at virtual address 00000194 pgd = (ptrval) [00000194] *pgd=00000000 Internal error: Oops: 5 [#1] SMP ARM Modules linked in: CPU: 0 PID: 72 Comm: irq/71-ac100-rt Not tainted 4.15.0-rc1-next-20171201-dirty #120 Hardware name: Allwinner sun8i Family task: (ptrval) task.stack: (ptrval) PC is at mutex_lock+0x14/0x3c LR is at ac100_rtc_irq+0x38/0xc8 pc : [<c06543a4>] lr : [<c04d9a2c>] psr: 60000053 sp : ee9c9f28 ip : 00000000 fp : ee9adfdc r10: 00000000 r9 : c0a04c48 r8 : c015ed18 r7 : ee9bd600 r6 : ee9c9f28 r5 : ee9af590 r4 : c0a04c48 r3 : ef3cb3c0 r2 : 00000000 r1 : ee9af590 r0 : 00000194 Flags: nZCv IRQs on FIQs off Mode SVC_32 ISA ARM Segment none Control: 10c5387d Table: 4000406a DAC: 00000051 Process irq/71-ac100-rt (pid: 72, stack limit = 0x(ptrval)) Stack: (0xee9c9f28 to 0xee9ca000) 9f20: 00000000 7c2fd1be c015ed18 ee9adf40 ee9c0400 ee9c0400 9f40: ee9adf40 c015ed34 ee9c8000 ee9adf64 ee9c0400 c015f040 ee9adf80 00000000 9f60: c015ee24 7c2fd1be ee9adfc0 ee9adf80 00000000 ee9c8000 ee9adf40 c015eef4 9f80: ef1eba34 c0138f14 ee9c8000 ee9adf80 c0138df4 00000000 00000000 00000000 9fa0: 00000000 00000000 00000000 c01010e8 00000000 00000000 00000000 00000000 9fc0: 00000000 00000000 00000000 00000000 00000000 00000000 00000000 00000000 9fe0: 00000000 00000000 00000000 00000000 00000013 00000000 ffffffff ffffffff [<c06543a4>] (mutex_lock) from [<c04d9a2c>] (ac100_rtc_irq+0x38/0xc8) [<c04d9a2c>] (ac100_rtc_irq) from [<c015ed34>] (irq_thread_fn+0x1c/0x54) [<c015ed34>] (irq_thread_fn) from [<c015f040>] (irq_thread+0x14c/0x214) [<c015f040>] (irq_thread) from [<c0138f14>] (kthread+0x120/0x150) [<c0138f14>] (kthread) from [<c01010e8>] (ret_from_fork+0x14/0x2c) Solve both issues by moving to devm_rtc_allocate_device()/rtc_register_device() Reported-by: Quentin Schulz <quentin.schulz(a)free-electrons.com> Tested-by: Quentin Schulz <quentin.schulz(a)free-electrons.com> Signed-off-by: Alexandre Belloni <alexandre.belloni(a)free-electrons.com> Signed-off-by: Sasha Levin <alexander.levin(a)microsoft.com> Signed-off-by: Greg Kroah-Hartman <gregkh(a)linuxfoundation.org> --- drivers/rtc/rtc-ac100.c | 19 ++++++++++++------- 1 file changed, 12 insertions(+), 7 deletions(-) --- a/drivers/rtc/rtc-ac100.c +++ b/drivers/rtc/rtc-ac100.c @@ -567,6 +567,12 @@ static int ac100_rtc_probe(struct platfo return chip->irq; } + chip->rtc = devm_rtc_allocate_device(&pdev->dev); + if (IS_ERR(chip->rtc)) + return PTR_ERR(chip->rtc); + + chip->rtc->ops = &ac100_rtc_ops; + ret = devm_request_threaded_irq(&pdev->dev, chip->irq, NULL, ac100_rtc_irq, IRQF_SHARED | IRQF_ONESHOT, @@ -586,17 +592,16 @@ static int ac100_rtc_probe(struct platfo /* clear counter alarm pending interrupts */ regmap_write(chip->regmap, AC100_ALM_INT_STA, AC100_ALM_INT_ENABLE); - chip->rtc = devm_rtc_device_register(&pdev->dev, "rtc-ac100", - &ac100_rtc_ops, THIS_MODULE); - if (IS_ERR(chip->rtc)) { - dev_err(&pdev->dev, "unable to register device\n"); - return PTR_ERR(chip->rtc); - } - ret = ac100_rtc_register_clks(chip); if (ret) return ret; + ret = rtc_register_device(chip->rtc); + if (ret) { + dev_err(&pdev->dev, "unable to register device\n"); + return ret; + } + dev_info(&pdev->dev, "RTC enabled\n"); return 0; Patches currently in stable-queue which might be from alexandre.belloni(a)free-electrons.com are queue-4.9/rtc-cmos-do-not-assume-irq-8-for-rtc-when-there-are-no-legacy-irqs.patch queue-4.9/rtc-ds1374-wdt-fix-stop-start-ioctl-always-returning-einval.patch queue-4.9/x86-i8259-export-legacy_pic-symbol.patch queue-4.9/rtc-ds1374-wdt-fix-issue-with-timeout-scaling-from-secs-to-wdt-ticks.patch queue-4.9/rtc-ac100-fix-multiple-race-conditions.patch

7 years, 5 months

1
0
0 0

Patch "rndis_wlan: add return value validation" has been added to the 4.9-stable tree

by gregkh＠linuxfoundation.org

This is a note to let you know that I've just added the patch titled rndis_wlan: add return value validation to the 4.9-stable tree which can be found at: http://www.kernel.org/git/?p=linux/kernel/git/stable/stable-queue.git;a=sum… The filename of the patch is: rndis_wlan-add-return-value-validation.patch and it can be found in the queue-4.9 subdirectory. If you, or anyone else, feels it should not be added to the stable tree, please let <stable(a)vger.kernel.org> know about it. >From foo@baz Thu Mar 22 14:40:23 CET 2018 From: Pan Bian <bianpan2016(a)163.com> Date: Mon, 24 Apr 2017 08:40:28 +0800 Subject: rndis_wlan: add return value validation From: Pan Bian <bianpan2016(a)163.com> [ Upstream commit 9dc7efd3978aa67ae598129d2a3f240b390ce508 ] Function create_singlethread_workqueue() will return a NULL pointer if there is no enough memory, and its return value should be validated before using. However, in function rndis_wlan_bind(), its return value is not checked. This may cause NULL dereference bugs. This patch fixes it. Signed-off-by: Pan Bian <bianpan2016(a)163.com> Signed-off-by: Kalle Valo <kvalo(a)codeaurora.org> Signed-off-by: Sasha Levin <alexander.levin(a)microsoft.com> Signed-off-by: Greg Kroah-Hartman <gregkh(a)linuxfoundation.org> --- drivers/net/wireless/rndis_wlan.c | 4 ++++ 1 file changed, 4 insertions(+) --- a/drivers/net/wireless/rndis_wlan.c +++ b/drivers/net/wireless/rndis_wlan.c @@ -3427,6 +3427,10 @@ static int rndis_wlan_bind(struct usbnet /* because rndis_command() sleeps we need to use workqueue */ priv->workqueue = create_singlethread_workqueue("rndis_wlan"); + if (!priv->workqueue) { + wiphy_free(wiphy); + return -ENOMEM; + } INIT_WORK(&priv->work, rndis_wlan_worker); INIT_DELAYED_WORK(&priv->dev_poller_work, rndis_device_poller); INIT_DELAYED_WORK(&priv->scan_work, rndis_get_scan_results); Patches currently in stable-queue which might be from bianpan2016(a)163.com are queue-4.9/tipc-check-return-value-of-nlmsg_new.patch queue-4.9/mt7601u-check-return-value-of-alloc_skb.patch queue-4.9/rndis_wlan-add-return-value-validation.patch queue-4.9/libertas-check-return-value-of-alloc_workqueue.patch queue-4.9/staging-wilc1000-fix-unchecked-return-value.patch queue-4.9/qlcnic-fix-unchecked-return-value.patch queue-4.9/wan-pc300too-abort-path-on-failure.patch queue-4.9/power-supply-isp1704-fix-unchecked-return-value-of-devm_kzalloc.patch

7 years, 5 months

1
0
0 0

Patch "regulator: anatop: set default voltage selector for pcie" has been added to the 4.9-stable tree

by gregkh＠linuxfoundation.org

This is a note to let you know that I've just added the patch titled regulator: anatop: set default voltage selector for pcie to the 4.9-stable tree which can be found at: http://www.kernel.org/git/?p=linux/kernel/git/stable/stable-queue.git;a=sum… The filename of the patch is: regulator-anatop-set-default-voltage-selector-for-pcie.patch and it can be found in the queue-4.9 subdirectory. If you, or anyone else, feels it should not be added to the stable tree, please let <stable(a)vger.kernel.org> know about it. >From foo@baz Thu Mar 22 14:40:23 CET 2018 From: Dong Aisheng <aisheng.dong(a)nxp.com> Date: Wed, 12 Apr 2017 09:58:47 +0800 Subject: regulator: anatop: set default voltage selector for pcie From: Dong Aisheng <aisheng.dong(a)nxp.com> [ Upstream commit 9bf944548169f6153c3d3778cf983cb5db251a0e ] Set the initial voltage selector for vddpcie in case it's disabled by default. This fixes the below warning: 20c8000.anatop:regulator-vddpcie: Failed to read a valid default voltage selector. anatop_regulator: probe of 20c8000.anatop:regulator-vddpcie failed with error -22 Cc: Liam Girdwood <lgirdwood(a)gmail.com> Cc: Mark Brown <broonie(a)kernel.org> Cc: Shawn Guo <shawnguo(a)kernel.org> Cc: Sascha Hauer <kernel(a)pengutronix.de> Cc: Robin Gong <yibin.gong(a)nxp.com> Cc: Richard Zhu <hongxing.zhu(a)nxp.com> Signed-off-by: Richard Zhu <hongxing.zhu(a)nxp.com> Signed-off-by: Dong Aisheng <aisheng.dong(a)nxp.com> Signed-off-by: Mark Brown <broonie(a)kernel.org> Signed-off-by: Sasha Levin <alexander.levin(a)microsoft.com> Signed-off-by: Greg Kroah-Hartman <gregkh(a)linuxfoundation.org> --- drivers/regulator/anatop-regulator.c | 5 +++++ 1 file changed, 5 insertions(+) --- a/drivers/regulator/anatop-regulator.c +++ b/drivers/regulator/anatop-regulator.c @@ -296,6 +296,11 @@ static int anatop_regulator_probe(struct if (!sreg->sel && !strcmp(sreg->name, "vddpu")) sreg->sel = 22; + /* set the default voltage of the pcie phy to be 1.100v */ + if (!sreg->sel && rdesc->name && + !strcmp(rdesc->name, "vddpcie")) + sreg->sel = 0x10; + if (!sreg->bypass && !sreg->sel) { dev_err(&pdev->dev, "Failed to read a valid default voltage selector.\n"); return -EINVAL; Patches currently in stable-queue which might be from aisheng.dong(a)nxp.com are queue-4.9/clk-don-t-touch-hardware-when-reparenting-during-registration.patch queue-4.9/regulator-anatop-set-default-voltage-selector-for-pcie.patch

7 years, 5 months

1
0
0 0

Patch "RDMA/ocrdma: Fix permissions for OCRDMA_RESET_STATS" has been added to the 4.9-stable tree

by gregkh＠linuxfoundation.org

This is a note to let you know that I've just added the patch titled RDMA/ocrdma: Fix permissions for OCRDMA_RESET_STATS to the 4.9-stable tree which can be found at: http://www.kernel.org/git/?p=linux/kernel/git/stable/stable-queue.git;a=sum… The filename of the patch is: rdma-ocrdma-fix-permissions-for-ocrdma_reset_stats.patch and it can be found in the queue-4.9 subdirectory. If you, or anyone else, feels it should not be added to the stable tree, please let <stable(a)vger.kernel.org> know about it. >From foo@baz Thu Mar 22 14:40:24 CET 2018 From: Anton Vasilyev <vasilyev(a)ispras.ru> Date: Tue, 8 Aug 2017 18:56:37 +0300 Subject: RDMA/ocrdma: Fix permissions for OCRDMA_RESET_STATS From: Anton Vasilyev <vasilyev(a)ispras.ru> [ Upstream commit 744820869166c8c78be891240cf5f66e8a333694 ] Debugfs file reset_stats is created with S_IRUSR permissions, but ocrdma_dbgfs_ops_read() doesn't support OCRDMA_RESET_STATS, whereas ocrdma_dbgfs_ops_write() supports only OCRDMA_RESET_STATS. The patch fixes misstype with permissions. Found by Linux Driver Verification project (linuxtesting.org). Signed-off-by: Anton Vasilyev <vasilyev(a)ispras.ru> Acked-by: Selvin Xavier <selvin.xavier(a)broadcom.com> Signed-off-by: Jason Gunthorpe <jgg(a)mellanox.com> Signed-off-by: Sasha Levin <alexander.levin(a)microsoft.com> Signed-off-by: Greg Kroah-Hartman <gregkh(a)linuxfoundation.org> --- drivers/infiniband/hw/ocrdma/ocrdma_stats.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) --- a/drivers/infiniband/hw/ocrdma/ocrdma_stats.c +++ b/drivers/infiniband/hw/ocrdma/ocrdma_stats.c @@ -836,7 +836,7 @@ void ocrdma_add_port_stats(struct ocrdma dev->reset_stats.type = OCRDMA_RESET_STATS; dev->reset_stats.dev = dev; - if (!debugfs_create_file("reset_stats", S_IRUSR, dev->dir, + if (!debugfs_create_file("reset_stats", 0200, dev->dir, &dev->reset_stats, &ocrdma_dbg_ops)) goto err; Patches currently in stable-queue which might be from vasilyev(a)ispras.ru are queue-4.9/rdma-ocrdma-fix-permissions-for-ocrdma_reset_stats.patch

7 years, 5 months

1
0
0 0

Patch "RDMA/iwpm: Fix uninitialized error code in iwpm_send_mapinfo()" has been added to the 4.9-stable tree

by gregkh＠linuxfoundation.org

This is a note to let you know that I've just added the patch titled RDMA/iwpm: Fix uninitialized error code in iwpm_send_mapinfo() to the 4.9-stable tree which can be found at: http://www.kernel.org/git/?p=linux/kernel/git/stable/stable-queue.git;a=sum… The filename of the patch is: rdma-iwpm-fix-uninitialized-error-code-in-iwpm_send_mapinfo.patch and it can be found in the queue-4.9 subdirectory. If you, or anyone else, feels it should not be added to the stable tree, please let <stable(a)vger.kernel.org> know about it. >From foo@baz Thu Mar 22 14:40:24 CET 2018 From: Geert Uytterhoeven <geert(a)linux-m68k.org> Date: Wed, 29 Nov 2017 09:47:33 +0100 Subject: RDMA/iwpm: Fix uninitialized error code in iwpm_send_mapinfo() From: Geert Uytterhoeven <geert(a)linux-m68k.org> [ Upstream commit 302d6424e4a293a5761997e6c9fc3dfb1e4c355f ] With gcc-4.1.2: drivers/infiniband/core/iwpm_util.c: In function ‘iwpm_send_mapinfo’: drivers/infiniband/core/iwpm_util.c:647: warning: ‘ret’ may be used uninitialized in this function Indeed, if nl_client is not found in any of the scanned has buckets, ret will be used uninitialized. Preinitialize ret to -EINVAL to fix this. Fixes: 30dc5e63d6a5ad24 ("RDMA/core: Add support for iWARP Port Mapper user space service") Signed-off-by: Geert Uytterhoeven <geert(a)linux-m68k.org> Reviewed-by: Tatyana Nikolova <tatyana.e.nikolova(a)intel.com> Signed-off-by: Jason Gunthorpe <jgg(a)mellanox.com> Signed-off-by: Sasha Levin <alexander.levin(a)microsoft.com> Signed-off-by: Greg Kroah-Hartman <gregkh(a)linuxfoundation.org> --- drivers/infiniband/core/iwpm_util.c | 1 + 1 file changed, 1 insertion(+) --- a/drivers/infiniband/core/iwpm_util.c +++ b/drivers/infiniband/core/iwpm_util.c @@ -664,6 +664,7 @@ int iwpm_send_mapinfo(u8 nl_client, int } skb_num++; spin_lock_irqsave(&iwpm_mapinfo_lock, flags); + ret = -EINVAL; for (i = 0; i < IWPM_MAPINFO_HASH_SIZE; i++) { hlist_for_each_entry(map_info, &iwpm_hash_bucket[i], hlist_node) { Patches currently in stable-queue which might be from geert(a)linux-m68k.org are queue-4.9/video-fbdev-udlfb-fix-buffer-on-stack.patch queue-4.9/rdma-iwpm-fix-uninitialized-error-code-in-iwpm_send_mapinfo.patch

7 years, 5 months

1
0
0 0

Patch "RDMA/cma: Use correct size when writing netlink stats" has been added to the 4.9-stable tree

by gregkh＠linuxfoundation.org

This is a note to let you know that I've just added the patch titled RDMA/cma: Use correct size when writing netlink stats to the 4.9-stable tree which can be found at: http://www.kernel.org/git/?p=linux/kernel/git/stable/stable-queue.git;a=sum… The filename of the patch is: rdma-cma-use-correct-size-when-writing-netlink-stats.patch and it can be found in the queue-4.9 subdirectory. If you, or anyone else, feels it should not be added to the stable tree, please let <stable(a)vger.kernel.org> know about it. >From foo@baz Thu Mar 22 14:40:24 CET 2018 From: Parav Pandit <parav(a)mellanox.com> Date: Tue, 14 Nov 2017 14:51:55 +0200 Subject: RDMA/cma: Use correct size when writing netlink stats From: Parav Pandit <parav(a)mellanox.com> [ Upstream commit 7baaa49af3716fb31877c61f59b74d029ce15b75 ] The code was using the src size when formatting the dst. They are almost certainly the same value but it reads wrong. Fixes: ce117ffac2e9 ("RDMA/cma: Export AF_IB statistics") Signed-off-by: Parav Pandit <parav(a)mellanox.com> Reviewed-by: Daniel Jurgens <danielj(a)mellanox.com> Signed-off-by: Leon Romanovsky <leon(a)kernel.org> Signed-off-by: Jason Gunthorpe <jgg(a)mellanox.com> Signed-off-by: Sasha Levin <alexander.levin(a)microsoft.com> Signed-off-by: Greg Kroah-Hartman <gregkh(a)linuxfoundation.org> --- drivers/infiniband/core/cma.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) --- a/drivers/infiniband/core/cma.c +++ b/drivers/infiniband/core/cma.c @@ -4336,7 +4336,7 @@ static int cma_get_id_stats(struct sk_bu RDMA_NL_RDMA_CM_ATTR_SRC_ADDR)) goto out; if (ibnl_put_attr(skb, nlh, - rdma_addr_size(cma_src_addr(id_priv)), + rdma_addr_size(cma_dst_addr(id_priv)), cma_dst_addr(id_priv), RDMA_NL_RDMA_CM_ATTR_DST_ADDR)) goto out; Patches currently in stable-queue which might be from parav(a)mellanox.com are queue-4.9/rdma-cma-use-correct-size-when-writing-netlink-stats.patch

7 years, 5 months

1
0
0 0

Patch "qmi_wwan: set FLAG_SEND_ZLP to avoid network initiated disconnect" has been added to the 4.9-stable tree

by gregkh＠linuxfoundation.org

This is a note to let you know that I've just added the patch titled qmi_wwan: set FLAG_SEND_ZLP to avoid network initiated disconnect to the 4.9-stable tree which can be found at: http://www.kernel.org/git/?p=linux/kernel/git/stable/stable-queue.git;a=sum… The filename of the patch is: qmi_wwan-set-flag_send_zlp-to-avoid-network-initiated-disconnect.patch and it can be found in the queue-4.9 subdirectory. If you, or anyone else, feels it should not be added to the stable tree, please let <stable(a)vger.kernel.org> know about it. >From foo@baz Thu Mar 22 14:40:24 CET 2018 From: "Bjørn Mork" <bjorn(a)mork.no> Date: Thu, 14 Dec 2017 19:55:50 +0100 Subject: qmi_wwan: set FLAG_SEND_ZLP to avoid network initiated disconnect From: "Bjørn Mork" <bjorn(a)mork.no> [ Upstream commit 245d21190aec547c0de64f70c0e6de871c185a24 ] It has been reported that the dummy byte we add to avoid ZLPs can be forwarded by the modem to the PGW/GGSN, and that some operators will drop the connection if this happens. In theory, QMI devices are based on CDC ECM and should as such both support ZLPs and silently ignore the dummy byte. The latter assumption failed. Let's test out the first. Signed-off-by: BjÃ¸rn Mork <bjorn(a)mork.no> Signed-off-by: David S. Miller <davem(a)davemloft.net> Signed-off-by: Sasha Levin <alexander.levin(a)microsoft.com> Signed-off-by: Greg Kroah-Hartman <gregkh(a)linuxfoundation.org> --- drivers/net/usb/qmi_wwan.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) --- a/drivers/net/usb/qmi_wwan.c +++ b/drivers/net/usb/qmi_wwan.c @@ -531,7 +531,7 @@ err: static const struct driver_info qmi_wwan_info = { .description = "WWAN/QMI device", - .flags = FLAG_WWAN, + .flags = FLAG_WWAN | FLAG_SEND_ZLP, .bind = qmi_wwan_bind, .unbind = qmi_wwan_unbind, .manage_power = qmi_wwan_manage_power, @@ -540,7 +540,7 @@ static const struct driver_info qmi_wwan static const struct driver_info qmi_wwan_info_quirk_dtr = { .description = "WWAN/QMI device", - .flags = FLAG_WWAN, + .flags = FLAG_WWAN | FLAG_SEND_ZLP, .bind = qmi_wwan_bind, .unbind = qmi_wwan_unbind, .manage_power = qmi_wwan_manage_power, Patches currently in stable-queue which might be from bjorn(a)mork.no are queue-4.9/qmi_wwan-set-flag_send_zlp-to-avoid-network-initiated-disconnect.patch

7 years, 5 months

1
0
0 0

Patch "qlcnic: fix unchecked return value" has been added to the 4.9-stable tree

by gregkh＠linuxfoundation.org

This is a note to let you know that I've just added the patch titled qlcnic: fix unchecked return value to the 4.9-stable tree which can be found at: http://www.kernel.org/git/?p=linux/kernel/git/stable/stable-queue.git;a=sum… The filename of the patch is: qlcnic-fix-unchecked-return-value.patch and it can be found in the queue-4.9 subdirectory. If you, or anyone else, feels it should not be added to the stable tree, please let <stable(a)vger.kernel.org> know about it. >From foo@baz Thu Mar 22 14:40:23 CET 2018 From: Pan Bian <bianpan2016(a)163.com> Date: Sun, 23 Apr 2017 20:04:04 +0800 Subject: qlcnic: fix unchecked return value From: Pan Bian <bianpan2016(a)163.com> [ Upstream commit 91ec701a553cb3de470fd471c6fefe3ad1125455 ] Function pci_find_ext_capability() may return 0, which is an invalid address. In function qlcnic_sriov_virtid_fn(), its return value is used without validation. This may result in invalid memory access bugs. This patch fixes the bug. Signed-off-by: Pan Bian <bianpan2016(a)163.com> Signed-off-by: David S. Miller <davem(a)davemloft.net> Signed-off-by: Sasha Levin <alexander.levin(a)microsoft.com> Signed-off-by: Greg Kroah-Hartman <gregkh(a)linuxfoundation.org> --- drivers/net/ethernet/qlogic/qlcnic/qlcnic_sriov_common.c | 2 ++ 1 file changed, 2 insertions(+) --- a/drivers/net/ethernet/qlogic/qlcnic/qlcnic_sriov_common.c +++ b/drivers/net/ethernet/qlogic/qlcnic/qlcnic_sriov_common.c @@ -128,6 +128,8 @@ static int qlcnic_sriov_virtid_fn(struct return 0; pos = pci_find_ext_capability(dev, PCI_EXT_CAP_ID_SRIOV); + if (!pos) + return 0; pci_read_config_word(dev, pos + PCI_SRIOV_VF_OFFSET, &offset); pci_read_config_word(dev, pos + PCI_SRIOV_VF_STRIDE, &stride); Patches currently in stable-queue which might be from bianpan2016(a)163.com are queue-4.9/tipc-check-return-value-of-nlmsg_new.patch queue-4.9/mt7601u-check-return-value-of-alloc_skb.patch queue-4.9/rndis_wlan-add-return-value-validation.patch queue-4.9/libertas-check-return-value-of-alloc_workqueue.patch queue-4.9/staging-wilc1000-fix-unchecked-return-value.patch queue-4.9/qlcnic-fix-unchecked-return-value.patch queue-4.9/wan-pc300too-abort-path-on-failure.patch queue-4.9/power-supply-isp1704-fix-unchecked-return-value-of-devm_kzalloc.patch

7 years, 5 months

1
0
0 0

Patch "qed: Unlock on error in qed_vf_pf_acquire()" has been added to the 4.9-stable tree

by gregkh＠linuxfoundation.org

This is a note to let you know that I've just added the patch titled qed: Unlock on error in qed_vf_pf_acquire() to the 4.9-stable tree which can be found at: http://www.kernel.org/git/?p=linux/kernel/git/stable/stable-queue.git;a=sum… The filename of the patch is: qed-unlock-on-error-in-qed_vf_pf_acquire.patch and it can be found in the queue-4.9 subdirectory. If you, or anyone else, feels it should not be added to the stable tree, please let <stable(a)vger.kernel.org> know about it. >From foo@baz Thu Mar 22 14:40:23 CET 2018 From: Dan Carpenter <dan.carpenter(a)oracle.com> Date: Fri, 28 Apr 2017 15:56:09 +0300 Subject: qed: Unlock on error in qed_vf_pf_acquire() From: Dan Carpenter <dan.carpenter(a)oracle.com> [ Upstream commit 66117a9d9a8ca948680d6554769ef9e88f936954 ] My static checker complains that we're holding a mutex on this error path. Let's goto exit instead of returning directly. Fixes: b0bccb69eba3 ("qed: Change locking scheme for VF channel") Signed-off-by: Dan Carpenter <dan.carpenter(a)oracle.com> Acked-by: Yuval Mintz <Yuval.Mintz(a)cavium.com> Signed-off-by: David S. Miller <davem(a)davemloft.net> Signed-off-by: Sasha Levin <alexander.levin(a)microsoft.com> Signed-off-by: Greg Kroah-Hartman <gregkh(a)linuxfoundation.org> --- drivers/net/ethernet/qlogic/qed/qed_vf.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) --- a/drivers/net/ethernet/qlogic/qed/qed_vf.c +++ b/drivers/net/ethernet/qlogic/qed/qed_vf.c @@ -204,7 +204,7 @@ static int qed_vf_pf_acquire(struct qed_ /* send acquire request */ rc = qed_send_msg2pf(p_hwfn, &resp->hdr.status, sizeof(*resp)); if (rc) - return rc; + goto exit; /* copy acquire response from buffer to p_hwfn */ memcpy(&p_iov->acquire_resp, resp, sizeof(p_iov->acquire_resp)); Patches currently in stable-queue which might be from dan.carpenter(a)oracle.com are queue-4.9/netfilter-x_tables-unlock-on-error-in-xt_find_table_lock.patch queue-4.9/asoc-intel-skylake-uninitialized-variable-in-probe_codec.patch queue-4.9/mmc-host-omap_hsmmc-checking-for-null-instead-of-is_err.patch queue-4.9/qed-unlock-on-error-in-qed_vf_pf_acquire.patch queue-4.9/hsi-ssi_protocol-double-free-in-ssip_pn_xmit.patch queue-4.9/cifs-small-underflow-in-cnvrtdosunixtm.patch queue-4.9/ib-rdmavt-restore-irqs-on-error-path-in-rvt_create_ah.patch

7 years, 5 months

1
0
0 0

Patch "pty: cancel pty slave port buf's work in tty_release" has been added to the 4.9-stable tree

by gregkh＠linuxfoundation.org

This is a note to let you know that I've just added the patch titled pty: cancel pty slave port buf's work in tty_release to the 4.9-stable tree which can be found at: http://www.kernel.org/git/?p=linux/kernel/git/stable/stable-queue.git;a=sum… The filename of the patch is: pty-cancel-pty-slave-port-buf-s-work-in-tty_release.patch and it can be found in the queue-4.9 subdirectory. If you, or anyone else, feels it should not be added to the stable tree, please let <stable(a)vger.kernel.org> know about it. >From foo@baz Thu Mar 22 14:40:24 CET 2018 From: Sahara <keun-o.park(a)darkmatter.ae> Date: Wed, 13 Dec 2017 09:10:48 +0400 Subject: pty: cancel pty slave port buf's work in tty_release From: Sahara <keun-o.park(a)darkmatter.ae> [ Upstream commit 2b022ab7542df60021ab57854b3faaaf42552eaf ] In case that CONFIG_SLUB_DEBUG is on and pty is used, races between release_one_tty and flush_to_ldisc work threads may happen and lead to use-after-free condition on tty->link->port. Because SLUB_DEBUG is turned on, freed tty->link->port is filled with POISON_FREE value. So far without SLUB_DEBUG, port was filled with zero and flush_to_ldisc could return without a problem by checking if tty is NULL. CPU 0 CPU 1 ----- ----- release_tty pty_write cancel_work_sync(tty) to = tty->link tty_kref_put(tty->link) tty_schedule_flip(to->port) << workqueue >> ... release_one_tty ... pty_cleanup ... kfree(tty->link->port) << workqueue >> flush_to_ldisc tty = READ_ONCE(port->itty) tty is 0x6b6b6b6b6b6b6b6b !!PANIC!! access tty->ldisc Unable to handle kernel paging request at virtual address 6b6b6b6b6b6b6b93 pgd = ffffffc0eb1c3000 [6b6b6b6b6b6b6b93] *pgd=0000000000000000, *pud=0000000000000000 ------------[ cut here ]------------ Kernel BUG at ffffff800851154c [verbose debug info unavailable] Internal error: Oops - BUG: 96000004 [#1] PREEMPT SMP CPU: 3 PID: 265 Comm: kworker/u8:9 Tainted: G W 3.18.31-g0a58eeb #1 Hardware name: Qualcomm Technologies, Inc. MSM 8996pro v1.1 + PMI8996 Carbide (DT) Workqueue: events_unbound flush_to_ldisc task: ffffffc0ed610ec0 ti: ffffffc0ed624000 task.ti: ffffffc0ed624000 PC is at ldsem_down_read_trylock+0x0/0x4c LR is at tty_ldisc_ref+0x24/0x4c pc : [<ffffff800851154c>] lr : [<ffffff800850f6c0>] pstate: 80400145 sp : ffffffc0ed627cd0 x29: ffffffc0ed627cd0 x28: 0000000000000000 x27: ffffff8009e05000 x26: ffffffc0d382cfa0 x25: 0000000000000000 x24: ffffff800a012f08 x23: 0000000000000000 x22: ffffffc0703fbc88 x21: 6b6b6b6b6b6b6b6b x20: 6b6b6b6b6b6b6b93 x19: 0000000000000000 x18: 0000000000000001 x17: 00e80000f80d6f53 x16: 0000000000000001 x15: 0000007f7d826fff x14: 00000000000000a0 x13: 0000000000000000 x12: 0000000000000109 x11: 0000000000000000 x10: 0000000000000000 x9 : ffffffc0ed624000 x8 : ffffffc0ed611580 x7 : 0000000000000000 x6 : ffffff800a42e000 x5 : 00000000000003fc x4 : 0000000003bd1201 x3 : 0000000000000001 x2 : 0000000000000001 x1 : ffffff800851004c x0 : 6b6b6b6b6b6b6b93 Signed-off-by: Sahara <keun-o.park(a)darkmatter.ae> Signed-off-by: Greg Kroah-Hartman <gregkh(a)linuxfoundation.org> Signed-off-by: Sasha Levin <alexander.levin(a)microsoft.com> Signed-off-by: Greg Kroah-Hartman <gregkh(a)linuxfoundation.org> --- drivers/tty/tty_io.c | 2 ++ 1 file changed, 2 insertions(+) --- a/drivers/tty/tty_io.c +++ b/drivers/tty/tty_io.c @@ -1702,6 +1702,8 @@ static void release_tty(struct tty_struc if (tty->link) tty->link->port->itty = NULL; tty_buffer_cancel_work(tty->port); + if (tty->link) + tty_buffer_cancel_work(tty->link->port); tty_kref_put(tty->link); tty_kref_put(tty); Patches currently in stable-queue which might be from keun-o.park(a)darkmatter.ae are queue-4.9/pty-cancel-pty-slave-port-buf-s-work-in-tty_release.patch

7 years, 5 months

1
0
0 0

Patch "powerpc/64s: Remove SAO feature from Power9 DD1" has been added to the 4.9-stable tree

by gregkh＠linuxfoundation.org

This is a note to let you know that I've just added the patch titled powerpc/64s: Remove SAO feature from Power9 DD1 to the 4.9-stable tree which can be found at: http://www.kernel.org/git/?p=linux/kernel/git/stable/stable-queue.git;a=sum… The filename of the patch is: powerpc-64s-remove-sao-feature-from-power9-dd1.patch and it can be found in the queue-4.9 subdirectory. If you, or anyone else, feels it should not be added to the stable tree, please let <stable(a)vger.kernel.org> know about it. >From foo@baz Thu Mar 22 14:40:23 CET 2018 From: Nicholas Piggin <npiggin(a)gmail.com> Date: Wed, 19 Apr 2017 12:27:38 +1000 Subject: powerpc/64s: Remove SAO feature from Power9 DD1 From: Nicholas Piggin <npiggin(a)gmail.com> [ Upstream commit ca80d5d0a8175c9be04cfbce24180b8f5e0a744b ] Power9 DD1 does not implement SAO. Although it's not widely used, its presence or absence is visible to user space via arch_validate_prot() so it's moderately important that we get the value right. Fixes: 7dccfbc325bb ("powerpc/book3s: Add a cpu table entry for different POWER9 revs") Signed-off-by: Nicholas Piggin <npiggin(a)gmail.com> Signed-off-by: Michael Ellerman <mpe(a)ellerman.id.au> Signed-off-by: Sasha Levin <alexander.levin(a)microsoft.com> Signed-off-by: Greg Kroah-Hartman <gregkh(a)linuxfoundation.org> --- arch/powerpc/include/asm/cputable.h | 3 ++- 1 file changed, 2 insertions(+), 1 deletion(-) --- a/arch/powerpc/include/asm/cputable.h +++ b/arch/powerpc/include/asm/cputable.h @@ -474,7 +474,8 @@ enum { CPU_FTR_ICSWX | CPU_FTR_CFAR | CPU_FTR_HVMODE | CPU_FTR_VMX_COPY | \ CPU_FTR_DBELL | CPU_FTR_HAS_PPR | CPU_FTR_DAWR | \ CPU_FTR_ARCH_207S | CPU_FTR_TM_COMP | CPU_FTR_ARCH_300) -#define CPU_FTRS_POWER9_DD1 (CPU_FTRS_POWER9 | CPU_FTR_POWER9_DD1) +#define CPU_FTRS_POWER9_DD1 ((CPU_FTRS_POWER9 | CPU_FTR_POWER9_DD1) & \ + (~CPU_FTR_SAO)) #define CPU_FTRS_CELL (CPU_FTR_USE_TB | CPU_FTR_LWSYNC | \ CPU_FTR_PPCAS_ARCH_V2 | CPU_FTR_CTRL | \ CPU_FTR_ALTIVEC_COMP | CPU_FTR_MMCRA | CPU_FTR_SMT | \ Patches currently in stable-queue which might be from npiggin(a)gmail.com are queue-4.9/powerpc-64s-remove-sao-feature-from-power9-dd1.patch

7 years, 5 months

1
0
0 0

Patch "power: supply: pda_power: move from timer to delayed_work" has been added to the 4.9-stable tree

by gregkh＠linuxfoundation.org

This is a note to let you know that I've just added the patch titled power: supply: pda_power: move from timer to delayed_work to the 4.9-stable tree which can be found at: http://www.kernel.org/git/?p=linux/kernel/git/stable/stable-queue.git;a=sum… The filename of the patch is: power-supply-pda_power-move-from-timer-to-delayed_work.patch and it can be found in the queue-4.9 subdirectory. If you, or anyone else, feels it should not be added to the stable tree, please let <stable(a)vger.kernel.org> know about it. >From foo@baz Thu Mar 22 14:40:23 CET 2018 From: Michael Trimarchi <michael(a)amarulasolutions.com> Date: Tue, 25 Apr 2017 15:18:05 +0200 Subject: power: supply: pda_power: move from timer to delayed_work From: Michael Trimarchi <michael(a)amarulasolutions.com> [ Upstream commit 633e8799ddc09431be2744c4a1efdbda13af2b0b ] This changed is needed to avoid locking problem during boot as shown: <5>[ 8.824096] Registering SWP/SWPB emulation handler <6>[ 8.977294] clock: disabling unused clocks to save power <3>[ 9.108154] BUG: sleeping function called from invalid context at kernel_albert/kernel/mutex.c:269 <3>[ 9.122894] in_atomic(): 1, irqs_disabled(): 0, pid: 1, name: swapper/0 <4>[ 9.130249] 3 locks held by swapper/0/1: <4>[ 9.134613] #0: (&__lockdep_no_validate__){......}, at: [<c0342430>] __driver_attach+0x58/0xa8 <4>[ 9.144500] #1: (&__lockdep_no_validate__){......}, at: [<c0342440>] __driver_attach+0x68/0xa8 <4>[ 9.154357] #2: (&polling_timer){......}, at: [<c0053770>] run_timer_softirq+0x108/0x3ec <4>[ 9.163726] Backtrace: <4>[ 9.166473] [<c001269c>] (dump_backtrace+0x0/0x114) from [<c067e5f0>] (dump_stack+0x20/0x24) <4>[ 9.175811] r6:00203230 r5:0000010d r4:d782e000 r3:60000113 <4>[ 9.182250] [<c067e5d0>] (dump_stack+0x0/0x24) from [<c007441c>] (__might_sleep+0x10c/0x128) <4>[ 9.191650] [<c0074310>] (__might_sleep+0x0/0x128) from [<c0688f60>] (mutex_lock_nested+0x34/0x36c) <4>[ 9.201660] r5:c02d5350 r4:d79a0c64 <4>[ 9.205688] [<c0688f2c>] (mutex_lock_nested+0x0/0x36c) from [<c02d5350>] (regulator_set_current_limit+0x30/0x118) <4>[ 9.217071] [<c02d5320>] (regulator_set_current_limit+0x0/0x118) from [<c0435ce0>] (update_charger+0x84/0xc4) <4>[ 9.228027] r7:d782fb20 r6:00000101 r5:c1767e94 r4:00000000 <4>[ 9.234436] [<c0435c5c>] (update_charger+0x0/0xc4) from [<c0435d40>] (psy_changed+0x20/0x48) <4>[ 9.243804] r5:d782e000 r4:c1767e94 <4>[ 9.247802] [<c0435d20>] (psy_changed+0x0/0x48) from [<c0435dec>] (polling_timer_func+0x84/0xb8) <4>[ 9.257537] r4:c1767e94 r3:00000002 <4>[ 9.261566] [<c0435d68>] (polling_timer_func+0x0/0xb8) from [<c00537e4>] (run_timer_softirq+0x17c/0x3ec) <4>[ 9.272033] r4:c1767eb0 r3:00000000 <4>[ 9.276062] [<c0053668>] (run_timer_softirq+0x0/0x3ec) from [<c004b000>] (__do_softirq+0xf0/0x298) <4>[ 9.286010] [<c004af10>] (__do_softirq+0x0/0x298) from [<c004b650>] (irq_exit+0x98/0xa0) <4>[ 9.295013] [<c004b5b8>] (irq_exit+0x0/0xa0) from [<c000edbc>] (handle_IRQ+0x60/0xc0) <4>[ 9.303680] r4:c1194e98 r3:c00bc778 <4>[ 9.307708] [<c000ed5c>] (handle_IRQ+0x0/0xc0) from [<c0008504>] (gic_handle_irq+0x34/0x68) <4>[ 9.316955] r8:000ac383 r7:d782fc3c r6:d782fc08 r5:c11936c4 r4:e0802100 <4>[ 9.324310] r3:c026ba48 <4>[ 9.327301] [<c00084d0>] (gic_handle_irq+0x0/0x68) from [<c068c2c0>] (__irq_svc+0x40/0x74) <4>[ 9.336456] Exception stack(0xd782fc08 to 0xd782fc50) <4>[ 9.342041] fc00: d6e30e6c ac383627 00000000 ac383417 ea19c000 ea200000 <4>[ 9.351104] fc20: beffffff 00000667 000ac383 d6e30670 d6e3066c d782fc94 d782fbe8 d782fc50 <4>[ 9.360168] fc40: c026ba48 c001d1f0 00000113 ffffffff Fixes: b2998049cfae ("[BATTERY] pda_power platform driver") Signed-off-by: Michael Trimarchi <michael(a)amarulasolutions.com> Signed-off-by: Anthony Brandon <anthony(a)amarulasolutions.com> Signed-off-by: Sebastian Reichel <sebastian.reichel(a)collabora.co.uk> Signed-off-by: Sasha Levin <alexander.levin(a)microsoft.com> Signed-off-by: Greg Kroah-Hartman <gregkh(a)linuxfoundation.org> --- drivers/power/supply/pda_power.c | 49 +++++++++++++++++++++------------------ 1 file changed, 27 insertions(+), 22 deletions(-) --- a/drivers/power/supply/pda_power.c +++ b/drivers/power/supply/pda_power.c @@ -30,9 +30,9 @@ static inline unsigned int get_irq_flags static struct device *dev; static struct pda_power_pdata *pdata; static struct resource *ac_irq, *usb_irq; -static struct timer_list charger_timer; -static struct timer_list supply_timer; -static struct timer_list polling_timer; +static struct delayed_work charger_work; +static struct delayed_work polling_work; +static struct delayed_work supply_work; static int polling; static struct power_supply *pda_psy_ac, *pda_psy_usb; @@ -140,7 +140,7 @@ static void update_charger(void) } } -static void supply_timer_func(unsigned long unused) +static void supply_work_func(struct work_struct *work) { if (ac_status == PDA_PSY_TO_CHANGE) { ac_status = new_ac_status; @@ -161,11 +161,12 @@ static void psy_changed(void) * Okay, charger set. Now wait a bit before notifying supplicants, * charge power should stabilize. */ - mod_timer(&supply_timer, - jiffies + msecs_to_jiffies(pdata->wait_for_charger)); + cancel_delayed_work(&supply_work); + schedule_delayed_work(&supply_work, + msecs_to_jiffies(pdata->wait_for_charger)); } -static void charger_timer_func(unsigned long unused) +static void charger_work_func(struct work_struct *work) { update_status(); psy_changed(); @@ -184,13 +185,14 @@ static irqreturn_t power_changed_isr(int * Wait a bit before reading ac/usb line status and setting charger, * because ac/usb status readings may lag from irq. */ - mod_timer(&charger_timer, - jiffies + msecs_to_jiffies(pdata->wait_for_status)); + cancel_delayed_work(&charger_work); + schedule_delayed_work(&charger_work, + msecs_to_jiffies(pdata->wait_for_status)); return IRQ_HANDLED; } -static void polling_timer_func(unsigned long unused) +static void polling_work_func(struct work_struct *work) { int changed = 0; @@ -211,8 +213,9 @@ static void polling_timer_func(unsigned if (changed) psy_changed(); - mod_timer(&polling_timer, - jiffies + msecs_to_jiffies(pdata->polling_interval)); + cancel_delayed_work(&polling_work); + schedule_delayed_work(&polling_work, + msecs_to_jiffies(pdata->polling_interval)); } #if IS_ENABLED(CONFIG_USB_PHY) @@ -250,8 +253,9 @@ static int otg_handle_notification(struc * Wait a bit before reading ac/usb line status and setting charger, * because ac/usb status readings may lag from irq. */ - mod_timer(&charger_timer, - jiffies + msecs_to_jiffies(pdata->wait_for_status)); + cancel_delayed_work(&charger_work); + schedule_delayed_work(&charger_work, + msecs_to_jiffies(pdata->wait_for_status)); return NOTIFY_OK; } @@ -300,8 +304,8 @@ static int pda_power_probe(struct platfo if (!pdata->ac_max_uA) pdata->ac_max_uA = 500000; - setup_timer(&charger_timer, charger_timer_func, 0); - setup_timer(&supply_timer, supply_timer_func, 0); + INIT_DELAYED_WORK(&charger_work, charger_work_func); + INIT_DELAYED_WORK(&supply_work, supply_work_func); ac_irq = platform_get_resource_byname(pdev, IORESOURCE_IRQ, "ac"); usb_irq = platform_get_resource_byname(pdev, IORESOURCE_IRQ, "usb"); @@ -385,9 +389,10 @@ static int pda_power_probe(struct platfo if (polling) { dev_dbg(dev, "will poll for status\n"); - setup_timer(&polling_timer, polling_timer_func, 0); - mod_timer(&polling_timer, - jiffies + msecs_to_jiffies(pdata->polling_interval)); + INIT_DELAYED_WORK(&polling_work, polling_work_func); + cancel_delayed_work(&polling_work); + schedule_delayed_work(&polling_work, + msecs_to_jiffies(pdata->polling_interval)); } if (ac_irq || usb_irq) @@ -433,9 +438,9 @@ static int pda_power_remove(struct platf free_irq(ac_irq->start, pda_psy_ac); if (polling) - del_timer_sync(&polling_timer); - del_timer_sync(&charger_timer); - del_timer_sync(&supply_timer); + cancel_delayed_work_sync(&polling_work); + cancel_delayed_work_sync(&charger_work); + cancel_delayed_work_sync(&supply_work); if (pdata->is_usb_online) power_supply_unregister(pda_psy_usb); Patches currently in stable-queue which might be from michael(a)amarulasolutions.com are queue-4.9/power-supply-pda_power-move-from-timer-to-delayed_work.patch

7 years, 5 months

1
0
0 0

Patch "power: supply: isp1704: Fix unchecked return value of devm_kzalloc" has been added to the 4.9-stable tree

by gregkh＠linuxfoundation.org

This is a note to let you know that I've just added the patch titled power: supply: isp1704: Fix unchecked return value of devm_kzalloc to the 4.9-stable tree which can be found at: http://www.kernel.org/git/?p=linux/kernel/git/stable/stable-queue.git;a=sum… The filename of the patch is: power-supply-isp1704-fix-unchecked-return-value-of-devm_kzalloc.patch and it can be found in the queue-4.9 subdirectory. If you, or anyone else, feels it should not be added to the stable tree, please let <stable(a)vger.kernel.org> know about it. >From foo@baz Thu Mar 22 14:40:23 CET 2018 From: Pan Bian <bianpan2016(a)163.com> Date: Mon, 24 Apr 2017 16:22:08 +0800 Subject: power: supply: isp1704: Fix unchecked return value of devm_kzalloc From: Pan Bian <bianpan2016(a)163.com> [ Upstream commit 8b20839988f1ed5e534b270f3776709b640dc7e0 ] Function devm_kzalloc() will return a NULL pointer. However, in function isp1704_charger_probe(), the return value of devm_kzalloc() is directly used without validation. This may result in a bad memory access bug. Fixes: 34a109610e2a ("isp1704_charger: Add DT support") Signed-off-by: Pan Bian <bianpan2016(a)163.com> Reviewed-by: Pali Rohár <pali.rohar(a)gmail.com> Signed-off-by: Sebastian Reichel <sebastian.reichel(a)collabora.co.uk> Signed-off-by: Sasha Levin <alexander.levin(a)microsoft.com> Signed-off-by: Greg Kroah-Hartman <gregkh(a)linuxfoundation.org> --- drivers/power/supply/isp1704_charger.c | 4 ++++ 1 file changed, 4 insertions(+) --- a/drivers/power/supply/isp1704_charger.c +++ b/drivers/power/supply/isp1704_charger.c @@ -418,6 +418,10 @@ static int isp1704_charger_probe(struct pdata = devm_kzalloc(&pdev->dev, sizeof(struct isp1704_charger_data), GFP_KERNEL); + if (!pdata) { + ret = -ENOMEM; + goto fail0; + } pdata->enable_gpio = gpio; dev_info(&pdev->dev, "init gpio %d\n", pdata->enable_gpio); Patches currently in stable-queue which might be from bianpan2016(a)163.com are queue-4.9/tipc-check-return-value-of-nlmsg_new.patch queue-4.9/mt7601u-check-return-value-of-alloc_skb.patch queue-4.9/rndis_wlan-add-return-value-validation.patch queue-4.9/libertas-check-return-value-of-alloc_workqueue.patch queue-4.9/staging-wilc1000-fix-unchecked-return-value.patch queue-4.9/qlcnic-fix-unchecked-return-value.patch queue-4.9/wan-pc300too-abort-path-on-failure.patch queue-4.9/power-supply-isp1704-fix-unchecked-return-value-of-devm_kzalloc.patch

7 years, 5 months

1
0
0 0

Patch "power: supply: bq24190_charger: Limit over/under voltage fault logging" has been added to the 4.9-stable tree

by gregkh＠linuxfoundation.org

This is a note to let you know that I've just added the patch titled power: supply: bq24190_charger: Limit over/under voltage fault logging to the 4.9-stable tree which can be found at: http://www.kernel.org/git/?p=linux/kernel/git/stable/stable-queue.git;a=sum… The filename of the patch is: power-supply-bq24190_charger-limit-over-under-voltage-fault-logging.patch and it can be found in the queue-4.9 subdirectory. If you, or anyone else, feels it should not be added to the stable tree, please let <stable(a)vger.kernel.org> know about it. >From foo@baz Thu Mar 22 14:40:23 CET 2018 From: Liam Breck <kernel(a)networkimprov.net> Date: Tue, 11 Apr 2017 04:59:54 -0700 Subject: power: supply: bq24190_charger: Limit over/under voltage fault logging From: Liam Breck <kernel(a)networkimprov.net> [ Upstream commit d63d07c6fc25182af6d3ab5b3b8737b0c1025ebd ] If the charger is unplugged before the battery is full we may see an over/under voltage fault. Ignore this rather then emitting a message or uevent. This fixes messages like these getting logged on charger unplug + replug: bq24190-charger 15-006b: Fault: boost 0, charge 1, battery 0, ntc 0 bq24190-charger 15-006b: Fault: boost 0, charge 0, battery 0, ntc 0 Cc: Tony Lindgren <tony(a)atomide.com> Cc: Hans de Goede <hdegoede(a)redhat.com> Signed-off-by: Liam Breck <kernel(a)networkimprov.net> Acked-by: Tony Lindgren <tony(a)atomide.com> Reviewed-by: Hans de Goede <hdegoede(a)redhat.com> Signed-off-by: Sebastian Reichel <sre(a)kernel.org> Signed-off-by: Sasha Levin <alexander.levin(a)microsoft.com> Signed-off-by: Greg Kroah-Hartman <gregkh(a)linuxfoundation.org> --- drivers/power/supply/bq24190_charger.c | 7 ++++++- 1 file changed, 6 insertions(+), 1 deletion(-) --- a/drivers/power/supply/bq24190_charger.c +++ b/drivers/power/supply/bq24190_charger.c @@ -1184,8 +1184,13 @@ static irqreturn_t bq24190_irq_handler_t } } while (f_reg && ++i < 2); + /* ignore over/under voltage fault after disconnect */ + if (f_reg == (1 << BQ24190_REG_F_CHRG_FAULT_SHIFT) && + !(ss_reg & BQ24190_REG_SS_PG_STAT_MASK)) + f_reg = 0; + if (f_reg != bdi->f_reg) { - dev_info(bdi->dev, + dev_warn(bdi->dev, "Fault: boost %d, charge %d, battery %d, ntc %d\n", !!(f_reg & BQ24190_REG_F_BOOST_FAULT_MASK), !!(f_reg & BQ24190_REG_F_CHRG_FAULT_MASK), Patches currently in stable-queue which might be from kernel(a)networkimprov.net are queue-4.9/power-supply-bq24190_charger-limit-over-under-voltage-fault-logging.patch queue-4.9/power-supply-bq24190_charger-add-disable-reset-device-property.patch

7 years, 5 months

1
0
0 0

Patch "power: supply: bq24190_charger: Add disable-reset device-property" has been added to the 4.9-stable tree

by gregkh＠linuxfoundation.org

This is a note to let you know that I've just added the patch titled power: supply: bq24190_charger: Add disable-reset device-property to the 4.9-stable tree which can be found at: http://www.kernel.org/git/?p=linux/kernel/git/stable/stable-queue.git;a=sum… The filename of the patch is: power-supply-bq24190_charger-add-disable-reset-device-property.patch and it can be found in the queue-4.9 subdirectory. If you, or anyone else, feels it should not be added to the stable tree, please let <stable(a)vger.kernel.org> know about it. >From foo@baz Thu Mar 22 14:40:23 CET 2018 From: Hans de Goede <hdegoede(a)redhat.com> Date: Fri, 14 Apr 2017 18:52:33 +0200 Subject: power: supply: bq24190_charger: Add disable-reset device-property From: Hans de Goede <hdegoede(a)redhat.com> [ Upstream commit 6cf62a3b97e78ba41d31390e59a1ddc98a9e3622 ] Allow platform-code to disable the reset on probe and suspend/resume by setting a "disable-reset" boolean device property on the device. There are several reasons why the platform-code may want to disable the reset on probe and suspend/resume: 1) Resetting the charger should never be necessary it should always have sane values programmed. If it is running with invalid values while we are not running (system turned off or suspended) there is a big problem as that may lead to overcharging the battery. 2) The reset in suspend() is meant to put the charger back into default mode, but this is not necessary and not a good idea. If the charger has been programmed with a higher max charge_current / charge_voltage then putting it back in default-mode will reset those to the safe power-on defaults, leading to slower charging, or charging to a lower voltage (and thus not using the full capacity) while suspended which is undesirable. Reprogramming the max charge_current / charge_voltage after the reset will not help here as that will put the charger back in host mode and start the i2c watchdog if the host then does not do anything for 40s (iow if we're suspended for more then 40s) the watchdog expires resetting the device to default-mode, including resetting all the registers to there safe power-on defaults. So the only way to keep using custom charge settings while suspending is to keep the charger in its normal running state with the i2c watchdog disabled. This is fine as the charger will still automatically switch from constant current to constant voltage and stop charging when the battery is full. 3) Besides never being necessary resetting the charger also causes problems on systems where the charge voltage limit is set higher then the reset value, if this is the case and the charger is reset while charging and the battery voltage is between the 2 voltages, then about half the time the charger gets confused and claims to be charging (REG08 contains 0x64) but in reality the charger has decoupled itself from VBUS (Q1 off) and is drawing 0A from VBUS, leaving the system running from the battery. This last problem is happening on a GPD-win mini PC with a bq24292i charger chip combined with a max17047 fuel-gauge and a LiHV battery. I've checked and TI does not list any errata for the bq24292i which could explain this (there are no errata at all). Cc: Liam Breck <kernel(a)networkimprov.net> Cc: Tony Lindgren <tony(a)atomide.com> Signed-off-by: Hans de Goede <hdegoede(a)redhat.com> Acked-by: Liam Breck <kernel(a)networkimprov.net> Signed-off-by: Sebastian Reichel <sebastian.reichel(a)collabora.co.uk> Signed-off-by: Sasha Levin <alexander.levin(a)microsoft.com> Signed-off-by: Greg Kroah-Hartman <gregkh(a)linuxfoundation.org> --- drivers/power/supply/bq24190_charger.c | 3 +++ 1 file changed, 3 insertions(+) --- a/drivers/power/supply/bq24190_charger.c +++ b/drivers/power/supply/bq24190_charger.c @@ -506,6 +506,9 @@ static int bq24190_register_reset(struct int ret, limit = 100; u8 v; + if (device_property_read_bool(bdi->dev, "disable-reset")) + return 0; + /* Reset the registers */ ret = bq24190_write_mask(bdi, BQ24190_REG_POC, BQ24190_REG_POC_RESET_MASK, Patches currently in stable-queue which might be from hdegoede(a)redhat.com are queue-4.9/power-supply-bq24190_charger-limit-over-under-voltage-fault-logging.patch queue-4.9/acpi-pmic-xpower-fix-power_table-addresses.patch queue-4.9/acpi-power-delay-turning-off-unused-power-resources-after-suspend.patch queue-4.9/rtc-cmos-do-not-assume-irq-8-for-rtc-when-there-are-no-legacy-irqs.patch queue-4.9/genirq-use-irqd_get_trigger_type-to-compare-the-trigger-type-for-shared-irqs.patch queue-4.9/power-supply-bq24190_charger-add-disable-reset-device-property.patch queue-4.9/x86-i8259-export-legacy_pic-symbol.patch

7 years, 5 months

1
0
0 0

Patch "pNFS: Fix use after free issues in pnfs_do_read()" has been added to the 4.9-stable tree

by gregkh＠linuxfoundation.org

This is a note to let you know that I've just added the patch titled pNFS: Fix use after free issues in pnfs_do_read() to the 4.9-stable tree which can be found at: http://www.kernel.org/git/?p=linux/kernel/git/stable/stable-queue.git;a=sum… The filename of the patch is: pnfs-fix-use-after-free-issues-in-pnfs_do_read.patch and it can be found in the queue-4.9 subdirectory. If you, or anyone else, feels it should not be added to the stable tree, please let <stable(a)vger.kernel.org> know about it. >From foo@baz Thu Mar 22 14:40:23 CET 2018 From: Trond Myklebust <trond.myklebust(a)primarydata.com> Date: Tue, 25 Apr 2017 11:26:53 -0400 Subject: pNFS: Fix use after free issues in pnfs_do_read() From: Trond Myklebust <trond.myklebust(a)primarydata.com> [ Upstream commit 6aeafd05eca9bc8ab6b03d7e56d09ffd18190f44 ] The assumption should be that if the caller returns PNFS_ATTEMPTED, then hdr has been consumed, and so we should not be testing hdr->task.tk_status. If the caller returns PNFS_TRY_AGAIN, then we need to recoalesce and free hdr. Signed-off-by: Trond Myklebust <trond.myklebust(a)primarydata.com> Signed-off-by: Sasha Levin <alexander.levin(a)microsoft.com> Signed-off-by: Greg Kroah-Hartman <gregkh(a)linuxfoundation.org> --- fs/nfs/pnfs.c | 16 +++++++++++++--- 1 file changed, 13 insertions(+), 3 deletions(-) --- a/fs/nfs/pnfs.c +++ b/fs/nfs/pnfs.c @@ -2308,10 +2308,20 @@ pnfs_do_read(struct nfs_pageio_descripto enum pnfs_try_status trypnfs; trypnfs = pnfs_try_to_read_data(hdr, call_ops, lseg); - if (trypnfs == PNFS_TRY_AGAIN) - pnfs_read_resend_pnfs(hdr); - if (trypnfs == PNFS_NOT_ATTEMPTED || hdr->task.tk_status) + switch (trypnfs) { + case PNFS_NOT_ATTEMPTED: pnfs_read_through_mds(desc, hdr); + case PNFS_ATTEMPTED: + break; + case PNFS_TRY_AGAIN: + /* cleanup hdr and prepare to redo pnfs */ + if (!test_and_set_bit(NFS_IOHDR_REDO, &hdr->flags)) { + struct nfs_pgio_mirror *mirror = nfs_pgio_current_mirror(desc); + list_splice_init(&hdr->pages, &mirror->pg_list); + mirror->pg_recoalesce = 1; + } + hdr->mds_ops->rpc_release(hdr); + } } static void pnfs_readhdr_free(struct nfs_pgio_header *hdr) Patches currently in stable-queue which might be from trond.myklebust(a)primarydata.com are queue-4.9/pnfs-fix-use-after-free-issues-in-pnfs_do_read.patch queue-4.9/pnfs-fix-a-deadlock-when-coalescing-writes-and-returning-the-layout.patch queue-4.9/nfs-fix-missing-pg_cleanup-after-nfs_pageio_cond_complete.patch

7 years, 5 months

1
0
0 0

Patch "pNFS: Fix a deadlock when coalescing writes and returning the layout" has been added to the 4.9-stable tree

by gregkh＠linuxfoundation.org

This is a note to let you know that I've just added the patch titled pNFS: Fix a deadlock when coalescing writes and returning the layout to the 4.9-stable tree which can be found at: http://www.kernel.org/git/?p=linux/kernel/git/stable/stable-queue.git;a=sum… The filename of the patch is: pnfs-fix-a-deadlock-when-coalescing-writes-and-returning-the-layout.patch and it can be found in the queue-4.9 subdirectory. If you, or anyone else, feels it should not be added to the stable tree, please let <stable(a)vger.kernel.org> know about it. >From foo@baz Thu Mar 22 14:40:24 CET 2018 From: Trond Myklebust <trond.myklebust(a)primarydata.com> Date: Mon, 1 May 2017 17:06:56 -0400 Subject: pNFS: Fix a deadlock when coalescing writes and returning the layout From: Trond Myklebust <trond.myklebust(a)primarydata.com> [ Upstream commit 61f454e30c18a28924e96be12592c0d5e24bcc81 ] Consider the following deadlock: Process P1 Process P2 Process P3 ========== ========== ========== lock_page(page) lseg = pnfs_update_layout(inode) lo = NFS_I(inode)->layout pnfs_error_mark_layout_for_return(lo) lock_page(page) lseg = pnfs_update_layout(inode) In this scenario, - P1 has declared the layout to be in error, but P2 holds a reference to a layout segment on that inode, so the layoutreturn is deferred. - P2 is waiting for a page lock held by P3. - P3 is asking for a new layout segment, but is blocked waiting for the layoutreturn. The fix is to ensure that pnfs_error_mark_layout_for_return() does not set the NFS_LAYOUT_RETURN flag, which blocks P3. Instead, we allow the latter to call LAYOUTGET so that it can make progress and unblock P2. Signed-off-by: Trond Myklebust <trond.myklebust(a)primarydata.com> Signed-off-by: Sasha Levin <alexander.levin(a)microsoft.com> Signed-off-by: Greg Kroah-Hartman <gregkh(a)linuxfoundation.org> --- fs/nfs/pnfs.c | 2 -- 1 file changed, 2 deletions(-) --- a/fs/nfs/pnfs.c +++ b/fs/nfs/pnfs.c @@ -1953,8 +1953,6 @@ void pnfs_error_mark_layout_for_return(s spin_lock(&inode->i_lock); pnfs_set_plh_return_info(lo, range.iomode, 0); - /* Block LAYOUTGET */ - set_bit(NFS_LAYOUT_RETURN, &lo->plh_flags); /* * mark all matching lsegs so that we are sure to have no live * segments at hand when sending layoutreturn. See pnfs_put_lseg() Patches currently in stable-queue which might be from trond.myklebust(a)primarydata.com are queue-4.9/pnfs-fix-use-after-free-issues-in-pnfs_do_read.patch queue-4.9/pnfs-fix-a-deadlock-when-coalescing-writes-and-returning-the-layout.patch queue-4.9/nfs-fix-missing-pg_cleanup-after-nfs_pageio_cond_complete.patch

7 years, 5 months

1
0
0 0

Patch "platform/x86: intel-vbtn: add volume up and down" has been added to the 4.9-stable tree

by gregkh＠linuxfoundation.org

This is a note to let you know that I've just added the patch titled platform/x86: intel-vbtn: add volume up and down to the 4.9-stable tree which can be found at: http://www.kernel.org/git/?p=linux/kernel/git/stable/stable-queue.git;a=sum… The filename of the patch is: platform-x86-intel-vbtn-add-volume-up-and-down.patch and it can be found in the queue-4.9 subdirectory. If you, or anyone else, feels it should not be added to the stable tree, please let <stable(a)vger.kernel.org> know about it. >From foo@baz Thu Mar 22 14:40:23 CET 2018 From: Maarten Maathuis <madman2003(a)gmail.com> Date: Mon, 24 Apr 2017 23:35:21 +0200 Subject: platform/x86: intel-vbtn: add volume up and down From: Maarten Maathuis <madman2003(a)gmail.com> [ Upstream commit 8d9e29972836b75eb74f533594999500a4c7cc19 ] Tested on HP Elite X2 1012 G1. Matches event report of Lenovo Helix 2 (https://www.spinics.net/lists/ibm-acpi-devel/msg03982.html). Signed-off-by: Maarten Maathuis <madman2003(a)shikahr.net> [andy: fixed indentation of comments and massaged title of the change] Signed-off-by: Andy Shevchenko <andriy.shevchenko(a)linux.intel.com> Signed-off-by: Sasha Levin <alexander.levin(a)microsoft.com> Signed-off-by: Greg Kroah-Hartman <gregkh(a)linuxfoundation.org> --- drivers/platform/x86/intel-vbtn.c | 4 ++++ 1 file changed, 4 insertions(+) --- a/drivers/platform/x86/intel-vbtn.c +++ b/drivers/platform/x86/intel-vbtn.c @@ -37,6 +37,10 @@ static const struct acpi_device_id intel static const struct key_entry intel_vbtn_keymap[] = { { KE_IGNORE, 0xC0, { KEY_POWER } }, /* power key press */ { KE_KEY, 0xC1, { KEY_POWER } }, /* power key release */ + { KE_KEY, 0xC4, { KEY_VOLUMEUP } }, /* volume-up key press */ + { KE_IGNORE, 0xC5, { KEY_VOLUMEUP } }, /* volume-up key release */ + { KE_KEY, 0xC6, { KEY_VOLUMEDOWN } }, /* volume-down key press */ + { KE_IGNORE, 0xC7, { KEY_VOLUMEDOWN } }, /* volume-down key release */ { KE_END }, }; Patches currently in stable-queue which might be from madman2003(a)gmail.com are queue-4.9/platform-x86-intel-vbtn-add-volume-up-and-down.patch

7 years, 5 months

1
0
0 0

Patch "platform/x86: asus-wmi: try to set als by default" has been added to the 4.9-stable tree

by gregkh＠linuxfoundation.org

This is a note to let you know that I've just added the patch titled platform/x86: asus-wmi: try to set als by default to the 4.9-stable tree which can be found at: http://www.kernel.org/git/?p=linux/kernel/git/stable/stable-queue.git;a=sum… The filename of the patch is: platform-x86-asus-wmi-try-to-set-als-by-default.patch and it can be found in the queue-4.9 subdirectory. If you, or anyone else, feels it should not be added to the stable tree, please let <stable(a)vger.kernel.org> know about it. >From foo@baz Thu Mar 22 14:40:23 CET 2018 From: Oleksij Rempel <linux(a)rempel-privat.de> Date: Fri, 28 Apr 2017 16:19:49 +0200 Subject: platform/x86: asus-wmi: try to set als by default From: Oleksij Rempel <linux(a)rempel-privat.de> [ Upstream commit e9b615186805e2c18a0ac76aca62c1543ecfdbb8 ] some laptops, for example ASUS UX330UAK, have brocken als_get function but working als_set funktion. In this case, ALS will stay turned off. Method (WMNB, 3, Serialized) { ... If (Local0 == 0x53545344) { ... If (IIA0 == 0x00050001) { If (!ALSP) { Return (0x02) } Local0 = (GALS & 0x10) <<<---- bug, should be: (GALS () & 0x10) If (Local0) { Return (0x00050001) } Else { Return (0x00050000) } } ..... If (Local0 == 0x53564544) { ... If (IIA0 == 0x00050001) { Return (ALSC (IIA1)) } ...... Method (GALS, 0, NotSerialized) { Local0 = Zero Local0 |= 0x20 If (ALAE) { Local0 |= 0x10 } Local1 = 0x0A Local1 <<= 0x08 Local0 |= Local1 Return (Local0) } Since it works without problems on Windows I assume ASUS WMI driver for Win never trying to get ALS state, and instead it is setting it by default to ON. This patch will do the same. Turn ALS on by default. Signed-off-by: Oleksij Rempel <linux(a)rempel-privat.de> Signed-off-by: Andy Shevchenko <andriy.shevchenko(a)linux.intel.com> Signed-off-by: Sasha Levin <alexander.levin(a)microsoft.com> Signed-off-by: Greg Kroah-Hartman <gregkh(a)linuxfoundation.org> --- drivers/platform/x86/asus-nb-wmi.c | 13 +++++++++++++ drivers/platform/x86/asus-wmi.c | 12 ++++++++++++ drivers/platform/x86/asus-wmi.h | 1 + 3 files changed, 26 insertions(+) --- a/drivers/platform/x86/asus-nb-wmi.c +++ b/drivers/platform/x86/asus-nb-wmi.c @@ -120,6 +120,10 @@ static struct quirk_entry quirk_asus_x55 .xusb2pr = 0x01D9, }; +static struct quirk_entry quirk_asus_ux330uak = { + .wmi_force_als_set = true, +}; + static int dmi_matched(const struct dmi_system_id *dmi) { quirks = dmi->driver_data; @@ -422,6 +426,15 @@ static const struct dmi_system_id asus_q }, { .callback = dmi_matched, + .ident = "ASUSTeK COMPUTER INC. UX330UAK", + .matches = { + DMI_MATCH(DMI_SYS_VENDOR, "ASUSTeK COMPUTER INC."), + DMI_MATCH(DMI_PRODUCT_NAME, "UX330UAK"), + }, + .driver_data = &quirk_asus_ux330uak, + }, + { + .callback = dmi_matched, .ident = "ASUSTeK COMPUTER INC. X550LB", .matches = { DMI_MATCH(DMI_SYS_VENDOR, "ASUSTeK COMPUTER INC."), --- a/drivers/platform/x86/asus-wmi.c +++ b/drivers/platform/x86/asus-wmi.c @@ -1109,6 +1109,15 @@ static void asus_wmi_set_xusb2pr(struct } /* + * Some devices dont support or have borcken get_als method + * but still support set method. + */ +static void asus_wmi_set_als(void) +{ + asus_wmi_set_devstate(ASUS_WMI_DEVID_ALS_ENABLE, 1, NULL); +} + +/* * Hwmon device */ static int asus_hwmon_agfn_fan_speed_read(struct asus_wmi *asus, int fan, @@ -2120,6 +2129,9 @@ static int asus_wmi_add(struct platform_ goto fail_rfkill; } + if (asus->driver->quirks->wmi_force_als_set) + asus_wmi_set_als(); + /* Some Asus desktop boards export an acpi-video backlight interface, stop this from showing up */ chassis_type = dmi_get_system_info(DMI_CHASSIS_TYPE); --- a/drivers/platform/x86/asus-wmi.h +++ b/drivers/platform/x86/asus-wmi.h @@ -45,6 +45,7 @@ struct quirk_entry { bool store_backlight_power; bool wmi_backlight_power; bool wmi_backlight_native; + bool wmi_force_als_set; int wapf; /* * For machines with AMD graphic chips, it will send out WMI event Patches currently in stable-queue which might be from linux(a)rempel-privat.de are queue-4.9/platform-x86-asus-wmi-try-to-set-als-by-default.patch

7 years, 5 months

1
0
0 0

Patch "platform/x86: asus-nb-wmi: Add wapf4 quirk for the X302UA" has been added to the 4.9-stable tree

by gregkh＠linuxfoundation.org

This is a note to let you know that I've just added the patch titled platform/x86: asus-nb-wmi: Add wapf4 quirk for the X302UA to the 4.9-stable tree which can be found at: http://www.kernel.org/git/?p=linux/kernel/git/stable/stable-queue.git;a=sum… The filename of the patch is: platform-x86-asus-nb-wmi-add-wapf4-quirk-for-the-x302ua.patch and it can be found in the queue-4.9 subdirectory. If you, or anyone else, feels it should not be added to the stable tree, please let <stable(a)vger.kernel.org> know about it. >From foo@baz Thu Mar 22 14:40:23 CET 2018 From: Santeri Toivonen <santeri.toivonen(a)vatsul.com> Date: Tue, 4 Apr 2017 21:09:00 +0300 Subject: platform/x86: asus-nb-wmi: Add wapf4 quirk for the X302UA From: Santeri Toivonen <santeri.toivonen(a)vatsul.com> [ Upstream commit f35823619db8bbaa2afea8705f239c3cecb9d22f ] Asus laptop X302UA starts up with Wi-Fi disabled, without a way to enable it. Set wapf=4 to fix the problem. Signed-off-by: Santeri Toivonen <santeri.toivonen(a)vatsul.com> Signed-off-by: Darren Hart (VMware) <dvhart(a)infradead.org> Signed-off-by: Sasha Levin <alexander.levin(a)microsoft.com> Signed-off-by: Greg Kroah-Hartman <gregkh(a)linuxfoundation.org> --- drivers/platform/x86/asus-nb-wmi.c | 9 +++++++++ 1 file changed, 9 insertions(+) --- a/drivers/platform/x86/asus-nb-wmi.c +++ b/drivers/platform/x86/asus-nb-wmi.c @@ -152,6 +152,15 @@ static const struct dmi_system_id asus_q }, { .callback = dmi_matched, + .ident = "ASUSTeK COMPUTER INC. X302UA", + .matches = { + DMI_MATCH(DMI_SYS_VENDOR, "ASUSTeK COMPUTER INC."), + DMI_MATCH(DMI_PRODUCT_NAME, "X302UA"), + }, + .driver_data = &quirk_asus_wapf4, + }, + { + .callback = dmi_matched, .ident = "ASUSTeK COMPUTER INC. X401U", .matches = { DMI_MATCH(DMI_SYS_VENDOR, "ASUSTeK COMPUTER INC."), Patches currently in stable-queue which might be from santeri.toivonen(a)vatsul.com are queue-4.9/platform-x86-asus-nb-wmi-add-wapf4-quirk-for-the-x302ua.patch

7 years, 5 months

1
0
0 0

Patch "platform/chrome: Use proper protocol transfer function" has been added to the 4.9-stable tree

by gregkh＠linuxfoundation.org

This is a note to let you know that I've just added the patch titled platform/chrome: Use proper protocol transfer function to the 4.9-stable tree which can be found at: http://www.kernel.org/git/?p=linux/kernel/git/stable/stable-queue.git;a=sum… The filename of the patch is: platform-chrome-use-proper-protocol-transfer-function.patch and it can be found in the queue-4.9 subdirectory. If you, or anyone else, feels it should not be added to the stable tree, please let <stable(a)vger.kernel.org> know about it. >From foo@baz Thu Mar 22 14:40:24 CET 2018 From: Shawn Nematbakhsh <shawnn(a)chromium.org> Date: Fri, 8 Sep 2017 13:50:11 -0700 Subject: platform/chrome: Use proper protocol transfer function From: Shawn Nematbakhsh <shawnn(a)chromium.org> [ Upstream commit d48b8c58c57f6edbe2965f0a5f62c5cf9593ca96 ] pkt_xfer should be used for protocol v3, and cmd_xfer otherwise. We had one instance of these functions correct, but not the second, fall-back case. We use the fall-back only when the first command returns an IN_PROGRESS status, which is only used on some EC firmwares where we don't want to constantly poll the bus, but instead back off and sleep/retry for a little while. Fixes: 2c7589af3c4d ("mfd: cros_ec: add proto v3 skeleton") Signed-off-by: Shawn Nematbakhsh <shawnn(a)chromium.org> Signed-off-by: Brian Norris <briannorris(a)chromium.org> Reviewed-by: Javier Martinez Canillas <javier(a)osg.samsung.com> Signed-off-by: Benson Leung <bleung(a)chromium.org> Signed-off-by: Sasha Levin <alexander.levin(a)microsoft.com> Signed-off-by: Greg Kroah-Hartman <gregkh(a)linuxfoundation.org> --- drivers/platform/chrome/cros_ec_proto.c | 8 +++++--- 1 file changed, 5 insertions(+), 3 deletions(-) --- a/drivers/platform/chrome/cros_ec_proto.c +++ b/drivers/platform/chrome/cros_ec_proto.c @@ -60,12 +60,14 @@ static int send_command(struct cros_ec_d struct cros_ec_command *msg) { int ret; + int (*xfer_fxn)(struct cros_ec_device *ec, struct cros_ec_command *msg); if (ec_dev->proto_version > 2) - ret = ec_dev->pkt_xfer(ec_dev, msg); + xfer_fxn = ec_dev->pkt_xfer; else - ret = ec_dev->cmd_xfer(ec_dev, msg); + xfer_fxn = ec_dev->cmd_xfer; + ret = (*xfer_fxn)(ec_dev, msg); if (msg->result == EC_RES_IN_PROGRESS) { int i; struct cros_ec_command *status_msg; @@ -88,7 +90,7 @@ static int send_command(struct cros_ec_d for (i = 0; i < EC_COMMAND_RETRIES; i++) { usleep_range(10000, 11000); - ret = ec_dev->cmd_xfer(ec_dev, status_msg); + ret = (*xfer_fxn)(ec_dev, status_msg); if (ret < 0) break; Patches currently in stable-queue which might be from shawnn(a)chromium.org are queue-4.9/platform-chrome-use-proper-protocol-transfer-function.patch

7 years, 5 months

1
0
0 0

2025

2024

2023

2022

2021

2020

2019

2018

2017

Linux-stable-mirror