- Linux-stable-mirror - lists.linaro.org

Patch "lockdep: fix fs_reclaim warning" has been added to the 4.14-stable tree

by gregkh＠linuxfoundation.org

This is a note to let you know that I've just added the patch titled lockdep: fix fs_reclaim warning to the 4.14-stable tree which can be found at: http://www.kernel.org/git/?p=linux/kernel/git/stable/stable-queue.git;a=sum… The filename of the patch is: lockdep-fix-fs_reclaim-warning.patch and it can be found in the queue-4.14 subdirectory. If you, or anyone else, feels it should not be added to the stable tree, please let <stable(a)vger.kernel.org> know about it. >From 2e517d681632326ed98399cb4dd99519efe3e32c Mon Sep 17 00:00:00 2001 From: Tetsuo Handa <penguin-kernel(a)I-love.SAKURA.ne.jp> Date: Thu, 22 Mar 2018 16:17:10 -0700 Subject: lockdep: fix fs_reclaim warning From: Tetsuo Handa <penguin-kernel(a)I-love.SAKURA.ne.jp> commit 2e517d681632326ed98399cb4dd99519efe3e32c upstream. Dave Jones reported fs_reclaim lockdep warnings. ============================================ WARNING: possible recursive locking detected 4.15.0-rc9-backup-debug+ #1 Not tainted -------------------------------------------- sshd/24800 is trying to acquire lock: (fs_reclaim){+.+.}, at: [<0000000084f438c2>] fs_reclaim_acquire.part.102+0x5/0x30 but task is already holding lock: (fs_reclaim){+.+.}, at: [<0000000084f438c2>] fs_reclaim_acquire.part.102+0x5/0x30 other info that might help us debug this: Possible unsafe locking scenario: CPU0 ---- lock(fs_reclaim); lock(fs_reclaim); *** DEADLOCK *** May be due to missing lock nesting notation 2 locks held by sshd/24800: #0: (sk_lock-AF_INET6){+.+.}, at: [<000000001a069652>] tcp_sendmsg+0x19/0x40 #1: (fs_reclaim){+.+.}, at: [<0000000084f438c2>] fs_reclaim_acquire.part.102+0x5/0x30 stack backtrace: CPU: 3 PID: 24800 Comm: sshd Not tainted 4.15.0-rc9-backup-debug+ #1 Call Trace: dump_stack+0xbc/0x13f __lock_acquire+0xa09/0x2040 lock_acquire+0x12e/0x350 fs_reclaim_acquire.part.102+0x29/0x30 kmem_cache_alloc+0x3d/0x2c0 alloc_extent_state+0xa7/0x410 __clear_extent_bit+0x3ea/0x570 try_release_extent_mapping+0x21a/0x260 __btrfs_releasepage+0xb0/0x1c0 btrfs_releasepage+0x161/0x170 try_to_release_page+0x162/0x1c0 shrink_page_list+0x1d5a/0x2fb0 shrink_inactive_list+0x451/0x940 shrink_node_memcg.constprop.88+0x4c9/0x5e0 shrink_node+0x12d/0x260 try_to_free_pages+0x418/0xaf0 __alloc_pages_slowpath+0x976/0x1790 __alloc_pages_nodemask+0x52c/0x5c0 new_slab+0x374/0x3f0 ___slab_alloc.constprop.81+0x47e/0x5a0 __slab_alloc.constprop.80+0x32/0x60 __kmalloc_track_caller+0x267/0x310 __kmalloc_reserve.isra.40+0x29/0x80 __alloc_skb+0xee/0x390 sk_stream_alloc_skb+0xb8/0x340 tcp_sendmsg_locked+0x8e6/0x1d30 tcp_sendmsg+0x27/0x40 inet_sendmsg+0xd0/0x310 sock_write_iter+0x17a/0x240 __vfs_write+0x2ab/0x380 vfs_write+0xfb/0x260 SyS_write+0xb6/0x140 do_syscall_64+0x1e5/0xc05 entry_SYSCALL64_slow_path+0x25/0x25 This warning is caused by commit d92a8cfcb37e ("locking/lockdep: Rework FS_RECLAIM annotation") which replaced the use of lockdep_{set,clear}_current_reclaim_state() in __perform_reclaim() and lockdep_trace_alloc() in slab_pre_alloc_hook() with fs_reclaim_acquire()/ fs_reclaim_release(). Since __kmalloc_reserve() from __alloc_skb() adds __GFP_NOMEMALLOC | __GFP_NOWARN to gfp_mask, and all reclaim path simply propagates __GFP_NOMEMALLOC, fs_reclaim_acquire() in slab_pre_alloc_hook() is trying to grab the 'fake' lock again when __perform_reclaim() already grabbed the 'fake' lock. The /* this guy won't enter reclaim */ if ((current->flags & PF_MEMALLOC) && !(gfp_mask & __GFP_NOMEMALLOC)) return false; test which causes slab_pre_alloc_hook() to try to grab the 'fake' lock was added by commit cf40bd16fdad ("lockdep: annotate reclaim context (__GFP_NOFS)"). But that test is outdated because PF_MEMALLOC thread won't enter reclaim regardless of __GFP_NOMEMALLOC after commit 341ce06f69ab ("page allocator: calculate the alloc_flags for allocation only once") added the PF_MEMALLOC safeguard ( /* Avoid recursion of direct reclaim */ if (p->flags & PF_MEMALLOC) goto nopage; in __alloc_pages_slowpath()). Thus, let's fix outdated test by removing __GFP_NOMEMALLOC test and allow __need_fs_reclaim() to return false. Link: http://lkml.kernel.org/r/201802280650.FJC73911.FOSOMLJVFFQtHO@I-love.SAKURA… Fixes: d92a8cfcb37ecd13 ("locking/lockdep: Rework FS_RECLAIM annotation") Signed-off-by: Tetsuo Handa <penguin-kernel(a)I-love.SAKURA.ne.jp> Reported-by: Dave Jones <davej(a)codemonkey.org.uk> Tested-by: Dave Jones <davej(a)codemonkey.org.uk> Cc: Peter Zijlstra <peterz(a)infradead.org> Cc: Nick Piggin <npiggin(a)gmail.com> Cc: Ingo Molnar <mingo(a)elte.hu> Cc: Nikolay Borisov <nborisov(a)suse.com> Cc: Michal Hocko <mhocko(a)kernel.org> Cc: <stable(a)vger.kernel.org> [4.14+] Signed-off-by: Andrew Morton <akpm(a)linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds(a)linux-foundation.org> Signed-off-by: Greg Kroah-Hartman <gregkh(a)linuxfoundation.org> --- mm/page_alloc.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) --- a/mm/page_alloc.c +++ b/mm/page_alloc.c @@ -3532,7 +3532,7 @@ static bool __need_fs_reclaim(gfp_t gfp_ return false; /* this guy won't enter reclaim */ - if ((current->flags & PF_MEMALLOC) && !(gfp_mask & __GFP_NOMEMALLOC)) + if (current->flags & PF_MEMALLOC) return false; /* We're only interested __GFP_FS allocations for now */ Patches currently in stable-queue which might be from penguin-kernel(a)I-love.SAKURA.ne.jp are queue-4.14/lockdep-fix-fs_reclaim-warning.patch

7 years, 5 months

1
0
0 0

Patch "MIPS: lantiq: ase: Enable MFD_SYSCON" has been added to the 4.14-stable tree

by gregkh＠linuxfoundation.org

This is a note to let you know that I've just added the patch titled MIPS: lantiq: ase: Enable MFD_SYSCON to the 4.14-stable tree which can be found at: http://www.kernel.org/git/?p=linux/kernel/git/stable/stable-queue.git;a=sum… The filename of the patch is: mips-lantiq-ase-enable-mfd_syscon.patch and it can be found in the queue-4.14 subdirectory. If you, or anyone else, feels it should not be added to the stable tree, please let <stable(a)vger.kernel.org> know about it. >From a821328c2f3003b908880792d71b2781b44fa53c Mon Sep 17 00:00:00 2001 From: Mathias Kresin <dev(a)kresin.me> Date: Fri, 16 Mar 2018 21:27:30 +0100 Subject: MIPS: lantiq: ase: Enable MFD_SYSCON From: Mathias Kresin <dev(a)kresin.me> commit a821328c2f3003b908880792d71b2781b44fa53c upstream. Enable syscon to use it for the RCU MFD on Amazon SE as well. The Amazon SE also has similar reset controller system as Danube and XWAY and use their drivers mostly. As these drivers now need syscon also activate the syscon subsystem for for Amazon SE. Fixes: 2b6639d4c794 ("MIPS: lantiq: Enable MFD_SYSCON to be able to use it for the RCU MFD") Signed-off-by: Mathias Kresin <dev(a)kresin.me> Signed-off-by: Hauke Mehrtens <hauke(a)hauke-m.de> Acked-by: Martin Blumenstingl <martin.blumenstingl(a)googlemail.com> Cc: Ralf Baechle <ralf(a)linux-mips.org> Cc: John Crispin <john(a)phrozen.org> Cc: linux-mips(a)linux-mips.org Cc: <stable(a)vger.kernel.org> # 4.14+ Patchwork: https://patchwork.linux-mips.org/patch/18817/ Signed-off-by: James Hogan <jhogan(a)kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh(a)linuxfoundation.org> --- arch/mips/lantiq/Kconfig | 2 ++ 1 file changed, 2 insertions(+) --- a/arch/mips/lantiq/Kconfig +++ b/arch/mips/lantiq/Kconfig @@ -13,6 +13,8 @@ choice config SOC_AMAZON_SE bool "Amazon SE" select SOC_TYPE_XWAY + select MFD_SYSCON + select MFD_CORE config SOC_XWAY bool "XWAY" Patches currently in stable-queue which might be from dev(a)kresin.me are queue-4.14/mips-lantiq-ase-enable-mfd_syscon.patch queue-4.14/mips-lantiq-enable-ahb-bus-for-usb.patch queue-4.14/mips-lantiq-fix-danube-usb-clock.patch

7 years, 5 months

1
0
0 0

Patch "iio: chemical: ccs811: Corrected firmware boot/application mode transition" has been added to the 4.14-stable tree

by gregkh＠linuxfoundation.org

This is a note to let you know that I've just added the patch titled iio: chemical: ccs811: Corrected firmware boot/application mode transition to the 4.14-stable tree which can be found at: http://www.kernel.org/git/?p=linux/kernel/git/stable/stable-queue.git;a=sum… The filename of the patch is: iio-chemical-ccs811-corrected-firmware-boot-application-mode-transition.patch and it can be found in the queue-4.14 subdirectory. If you, or anyone else, feels it should not be added to the stable tree, please let <stable(a)vger.kernel.org> know about it. >From b91e146c38b003c899710ede6d05fc824675e386 Mon Sep 17 00:00:00 2001 From: Richard Lai <richard(a)richardman.com> Date: Sat, 17 Feb 2018 16:28:24 +0000 Subject: iio: chemical: ccs811: Corrected firmware boot/application mode transition From: Richard Lai <richard(a)richardman.com> commit b91e146c38b003c899710ede6d05fc824675e386 upstream. CCS811 has different I2C register maps in boot and application mode. When CCS811 is in boot mode, register APP_START (0xF4) is used to transit the firmware state from boot to application mode. However, APP_START is not a valid register location when CCS811 is in application mode (refer to "CCS811 Bootloader Register Map" and "CCS811 Application Register Map" in CCS811 datasheet). The driver should not attempt to perform a write to APP_START while CCS811 is in application mode, as this is not a valid or documented register location. When prob function is being called, the driver assumes the CCS811 sensor is in boot mode, and attempts to perform a write to APP_START. Although CCS811 powers-up in boot mode, it may have already been transited to application mode by previous instances, e.g. unload and reload device driver by the system, or explicitly by user. Depending on the system design, CCS811 sensor may be permanently connected to system power source rather than power controlled by GPIO, hence it is possible that the sensor is never power reset, thus the firmware could be in either boot or application mode at any given time when driver prob function is being called. This patch checks the STATUS register before attempting to send a write to APP_START. Only if the firmware is not in application mode and has valid firmware application loaded, then it will continue to start transiting the firmware boot to application mode. Signed-off-by: Richard Lai <richard(a)richardman.com> Cc: <Stable(a)vger.kernel.org> Signed-off-by: Jonathan Cameron <Jonathan.Cameron(a)huawei.com> Signed-off-by: Greg Kroah-Hartman <gregkh(a)linuxfoundation.org> --- drivers/iio/chemical/ccs811.c | 3 +++ 1 file changed, 3 insertions(+) --- a/drivers/iio/chemical/ccs811.c +++ b/drivers/iio/chemical/ccs811.c @@ -128,6 +128,9 @@ static int ccs811_start_sensor_applicati if (ret < 0) return ret; + if ((ret & CCS811_STATUS_FW_MODE_APPLICATION)) + return 0; + if ((ret & CCS811_STATUS_APP_VALID_MASK) != CCS811_STATUS_APP_VALID_LOADED) return -EIO; Patches currently in stable-queue which might be from richard(a)richardman.com are queue-4.14/iio-chemical-ccs811-corrected-firmware-boot-application-mode-transition.patch

7 years, 5 months

1
0
0 0

Patch "iio: st_pressure: st_accel: pass correct platform data to init" has been added to the 4.14-stable tree

by gregkh＠linuxfoundation.org

This is a note to let you know that I've just added the patch titled iio: st_pressure: st_accel: pass correct platform data to init to the 4.14-stable tree which can be found at: http://www.kernel.org/git/?p=linux/kernel/git/stable/stable-queue.git;a=sum… The filename of the patch is: iio-st_pressure-st_accel-pass-correct-platform-data-to-init.patch and it can be found in the queue-4.14 subdirectory. If you, or anyone else, feels it should not be added to the stable tree, please let <stable(a)vger.kernel.org> know about it. >From 8b438686a001db64c21782d04ef68111e53c45d9 Mon Sep 17 00:00:00 2001 From: Michael Nosthoff <committed(a)heine.so> Date: Fri, 9 Mar 2018 10:02:45 +0100 Subject: iio: st_pressure: st_accel: pass correct platform data to init From: Michael Nosthoff <committed(a)heine.so> commit 8b438686a001db64c21782d04ef68111e53c45d9 upstream. Commit 7383d44b added a pointer pdata which get set to the default platform_data when non was defined in the device. But it did not pass this pointer to the st_sensors_init_sensor call but still used the maybe uninitialized platform_data from dev. This breaks initialization when no platform_data is given and the optional st,drdy-int-pin devicetree option is not set. This commit fixes this. Cc: stable(a)vger.kernel.org Fixes: 7383d44b ("iio: st_pressure: st_accel: Initialise sensor platform data properly") Signed-off-by: Michael Nosthoff <committed(a)heine.so> Signed-off-by: Jonathan Cameron <Jonathan.Cameron(a)huawei.com> Signed-off-by: Greg Kroah-Hartman <gregkh(a)linuxfoundation.org> --- drivers/iio/accel/st_accel_core.c | 2 +- drivers/iio/pressure/st_pressure_core.c | 2 +- 2 files changed, 2 insertions(+), 2 deletions(-) --- a/drivers/iio/accel/st_accel_core.c +++ b/drivers/iio/accel/st_accel_core.c @@ -794,7 +794,7 @@ int st_accel_common_probe(struct iio_dev if (!pdata) pdata = (struct st_sensors_platform_data *)&default_accel_pdata; - err = st_sensors_init_sensor(indio_dev, adata->dev->platform_data); + err = st_sensors_init_sensor(indio_dev, pdata); if (err < 0) goto st_accel_power_off; --- a/drivers/iio/pressure/st_pressure_core.c +++ b/drivers/iio/pressure/st_pressure_core.c @@ -617,7 +617,7 @@ int st_press_common_probe(struct iio_dev if (!pdata && press_data->sensor_settings->drdy_irq.addr) pdata = (struct st_sensors_platform_data *)&default_press_pdata; - err = st_sensors_init_sensor(indio_dev, press_data->dev->platform_data); + err = st_sensors_init_sensor(indio_dev, pdata); if (err < 0) goto st_press_power_off; Patches currently in stable-queue which might be from committed(a)heine.so are queue-4.14/iio-st_pressure-st_accel-pass-correct-platform-data-to-init.patch

7 years, 5 months

1
0
0 0

Patch "iio: adc: meson-saradc: unlock on error in meson_sar_adc_lock()" has been added to the 4.14-stable tree

by gregkh＠linuxfoundation.org

This is a note to let you know that I've just added the patch titled iio: adc: meson-saradc: unlock on error in meson_sar_adc_lock() to the 4.14-stable tree which can be found at: http://www.kernel.org/git/?p=linux/kernel/git/stable/stable-queue.git;a=sum… The filename of the patch is: iio-adc-meson-saradc-unlock-on-error-in-meson_sar_adc_lock.patch and it can be found in the queue-4.14 subdirectory. If you, or anyone else, feels it should not be added to the stable tree, please let <stable(a)vger.kernel.org> know about it. >From 3c3e4b3a708a9d6451052e348981f37d2b3e92b0 Mon Sep 17 00:00:00 2001 From: Dan Carpenter <dan.carpenter(a)oracle.com> Date: Thu, 8 Mar 2018 12:31:53 +0300 Subject: iio: adc: meson-saradc: unlock on error in meson_sar_adc_lock() From: Dan Carpenter <dan.carpenter(a)oracle.com> commit 3c3e4b3a708a9d6451052e348981f37d2b3e92b0 upstream. The meson_sar_adc_lock() function is not supposed to hold the "indio_dev->mlock" on the error path. Fixes: 3adbf3427330 ("iio: adc: add a driver for the SAR ADC found in Amlogic Meson SoCs") Signed-off-by: Dan Carpenter <dan.carpenter(a)oracle.com> Cc: <Stable(a)vger.kernel.org> Signed-off-by: Jonathan Cameron <Jonathan.Cameron(a)huawei.com> Signed-off-by: Greg Kroah-Hartman <gregkh(a)linuxfoundation.org> --- drivers/iio/adc/meson_saradc.c | 4 +++- 1 file changed, 3 insertions(+), 1 deletion(-) --- a/drivers/iio/adc/meson_saradc.c +++ b/drivers/iio/adc/meson_saradc.c @@ -462,8 +462,10 @@ static int meson_sar_adc_lock(struct iio regmap_read(priv->regmap, MESON_SAR_ADC_DELAY, &val); } while (val & MESON_SAR_ADC_DELAY_BL30_BUSY && timeout--); - if (timeout < 0) + if (timeout < 0) { + mutex_unlock(&indio_dev->mlock); return -ETIMEDOUT; + } } return 0; Patches currently in stable-queue which might be from dan.carpenter(a)oracle.com are queue-4.14/iio-adc-meson-saradc-unlock-on-error-in-meson_sar_adc_lock.patch

7 years, 5 months

1
0
0 0

Patch "Drivers: hv: vmbus: Fix ring buffer signaling" has been added to the 4.14-stable tree

by gregkh＠linuxfoundation.org

This is a note to let you know that I've just added the patch titled Drivers: hv: vmbus: Fix ring buffer signaling to the 4.14-stable tree which can be found at: http://www.kernel.org/git/?p=linux/kernel/git/stable/stable-queue.git;a=sum… The filename of the patch is: drivers-hv-vmbus-fix-ring-buffer-signaling.patch and it can be found in the queue-4.14 subdirectory. If you, or anyone else, feels it should not be added to the stable tree, please let <stable(a)vger.kernel.org> know about it. >From 655296c8bbeffcf020558c4455305d597a73bde1 Mon Sep 17 00:00:00 2001 From: Michael Kelley <mhkelley(a)outlook.com> Date: Sun, 4 Mar 2018 22:24:08 -0700 Subject: Drivers: hv: vmbus: Fix ring buffer signaling From: Michael Kelley <mhkelley(a)outlook.com> commit 655296c8bbeffcf020558c4455305d597a73bde1 upstream. Fix bugs in signaling the Hyper-V host when freeing space in the host->guest ring buffer: 1. The interrupt_mask must not be used to determine whether to signal on the host->guest ring buffer 2. The ring buffer write_index must be read (via hv_get_bytes_to_write) *after* pending_send_sz is read in order to avoid a race condition 3. Comparisons with pending_send_sz must treat the "equals" case as not-enough-space 4. Don't signal if the pending_send_sz feature is not present. Older versions of Hyper-V that don't implement this feature will poll. Fixes: 03bad714a161 ("vmbus: more host signalling avoidance") Cc: Stable <stable(a)vger.kernel.org> # 4.14 and above Signed-off-by: Michael Kelley <mhkelley(a)outlook.com> Signed-off-by: K. Y. Srinivasan <kys(a)microsoft.com> Signed-off-by: Greg Kroah-Hartman <gregkh(a)linuxfoundation.org> --- drivers/hv/ring_buffer.c | 54 +++++++++++++++++++++++++++++++---------------- 1 file changed, 36 insertions(+), 18 deletions(-) --- a/drivers/hv/ring_buffer.c +++ b/drivers/hv/ring_buffer.c @@ -394,13 +394,24 @@ __hv_pkt_iter_next(struct vmbus_channel } EXPORT_SYMBOL_GPL(__hv_pkt_iter_next); +/* How many bytes were read in this iterator cycle */ +static u32 hv_pkt_iter_bytes_read(const struct hv_ring_buffer_info *rbi, + u32 start_read_index) +{ + if (rbi->priv_read_index >= start_read_index) + return rbi->priv_read_index - start_read_index; + else + return rbi->ring_datasize - start_read_index + + rbi->priv_read_index; +} + /* * Update host ring buffer after iterating over packets. */ void hv_pkt_iter_close(struct vmbus_channel *channel) { struct hv_ring_buffer_info *rbi = &channel->inbound; - u32 orig_write_sz = hv_get_bytes_to_write(rbi); + u32 curr_write_sz, pending_sz, bytes_read, start_read_index; /* * Make sure all reads are done before we update the read index since @@ -408,8 +419,12 @@ void hv_pkt_iter_close(struct vmbus_chan * is updated. */ virt_rmb(); + start_read_index = rbi->ring_buffer->read_index; rbi->ring_buffer->read_index = rbi->priv_read_index; + if (!rbi->ring_buffer->feature_bits.feat_pending_send_sz) + return; + /* * Issue a full memory barrier before making the signaling decision. * Here is the reason for having this barrier: @@ -423,26 +438,29 @@ void hv_pkt_iter_close(struct vmbus_chan */ virt_mb(); - /* If host has disabled notifications then skip */ - if (rbi->ring_buffer->interrupt_mask) + pending_sz = READ_ONCE(rbi->ring_buffer->pending_send_sz); + if (!pending_sz) return; - if (rbi->ring_buffer->feature_bits.feat_pending_send_sz) { - u32 pending_sz = READ_ONCE(rbi->ring_buffer->pending_send_sz); + /* + * Ensure the read of write_index in hv_get_bytes_to_write() + * happens after the read of pending_send_sz. + */ + virt_rmb(); + curr_write_sz = hv_get_bytes_to_write(rbi); + bytes_read = hv_pkt_iter_bytes_read(rbi, start_read_index); + + /* + * If there was space before we began iteration, + * then host was not blocked. + */ - /* - * If there was space before we began iteration, - * then host was not blocked. Also handles case where - * pending_sz is zero then host has nothing pending - * and does not need to be signaled. - */ - if (orig_write_sz > pending_sz) - return; - - /* If pending write will not fit, don't give false hope. */ - if (hv_get_bytes_to_write(rbi) < pending_sz) - return; - } + if (curr_write_sz - bytes_read > pending_sz) + return; + + /* If pending write will not fit, don't give false hope. */ + if (curr_write_sz <= pending_sz) + return; vmbus_setevent(channel); } Patches currently in stable-queue which might be from mhkelley(a)outlook.com are queue-4.14/drivers-hv-vmbus-fix-ring-buffer-signaling.patch

7 years, 5 months

1
0
0 0

Patch "clk: sunxi-ng: a31: Fix CLK_OUT_* clock ops" has been added to the 4.14-stable tree

by gregkh＠linuxfoundation.org

This is a note to let you know that I've just added the patch titled clk: sunxi-ng: a31: Fix CLK_OUT_* clock ops to the 4.14-stable tree which can be found at: http://www.kernel.org/git/?p=linux/kernel/git/stable/stable-queue.git;a=sum… The filename of the patch is: clk-sunxi-ng-a31-fix-clk_out_-clock-ops.patch and it can be found in the queue-4.14 subdirectory. If you, or anyone else, feels it should not be added to the stable tree, please let <stable(a)vger.kernel.org> know about it. >From 5682e268350f9eccdbb04006605c1b7068a7b323 Mon Sep 17 00:00:00 2001 From: Chen-Yu Tsai <wens(a)csie.org> Date: Sat, 17 Feb 2018 21:05:04 +0800 Subject: clk: sunxi-ng: a31: Fix CLK_OUT_* clock ops From: Chen-Yu Tsai <wens(a)csie.org> commit 5682e268350f9eccdbb04006605c1b7068a7b323 upstream. When support for the A31/A31s CCU was first added, the clock ops for the CLK_OUT_* clocks was set to the wrong type. The clocks are MP-type, but the ops was set for div (M) clocks. This went unnoticed until now. This was because while they are different clocks, their data structures aligned in a way that ccu_div_ops would access the second ccu_div_internal and ccu_mux_internal structures, which were valid, if not incorrect. Furthermore, the use of these CLK_OUT_* was for feeding a precise 32.768 kHz clock signal to the WiFi chip. This was achievable by using the parent with the same clock rate and no divider. So the incorrect divider setting did not affect this usage. Commit 946797aa3f08 ("clk: sunxi-ng: Support fixed post-dividers on MP style clocks") added a new field to the ccu_mp structure, which broke the aforementioned alignment. Now the system crashes as div_ops tries to look up a nonexistent table. Reported-by: Philipp Rossak <embed3d(a)gmail.com> Tested-by: Philipp Rossak <embed3d(a)gmail.com> Fixes: c6e6c96d8fa6 ("clk: sunxi-ng: Add A31/A31s clocks") Cc: <stable(a)vger.kernel.org> Signed-off-by: Chen-Yu Tsai <wens(a)csie.org> Signed-off-by: Maxime Ripard <maxime.ripard(a)bootlin.com> Signed-off-by: Greg Kroah-Hartman <gregkh(a)linuxfoundation.org> --- drivers/clk/sunxi-ng/ccu-sun6i-a31.c | 6 +++--- 1 file changed, 3 insertions(+), 3 deletions(-) --- a/drivers/clk/sunxi-ng/ccu-sun6i-a31.c +++ b/drivers/clk/sunxi-ng/ccu-sun6i-a31.c @@ -750,7 +750,7 @@ static struct ccu_mp out_a_clk = { .features = CCU_FEATURE_FIXED_PREDIV, .hw.init = CLK_HW_INIT_PARENTS("out-a", clk_out_parents, - &ccu_div_ops, + &ccu_mp_ops, 0), }, }; @@ -771,7 +771,7 @@ static struct ccu_mp out_b_clk = { .features = CCU_FEATURE_FIXED_PREDIV, .hw.init = CLK_HW_INIT_PARENTS("out-b", clk_out_parents, - &ccu_div_ops, + &ccu_mp_ops, 0), }, }; @@ -792,7 +792,7 @@ static struct ccu_mp out_c_clk = { .features = CCU_FEATURE_FIXED_PREDIV, .hw.init = CLK_HW_INIT_PARENTS("out-c", clk_out_parents, - &ccu_div_ops, + &ccu_mp_ops, 0), }, }; Patches currently in stable-queue which might be from wens(a)csie.org are queue-4.14/clk-sunxi-ng-a31-fix-clk_out_-clock-ops.patch

7 years, 5 months

1
0
0 0

Patch "clk: bcm2835: Fix ana->maskX definitions" has been added to the 4.14-stable tree

by gregkh＠linuxfoundation.org

This is a note to let you know that I've just added the patch titled clk: bcm2835: Fix ana->maskX definitions to the 4.14-stable tree which can be found at: http://www.kernel.org/git/?p=linux/kernel/git/stable/stable-queue.git;a=sum… The filename of the patch is: clk-bcm2835-fix-ana-maskx-definitions.patch and it can be found in the queue-4.14 subdirectory. If you, or anyone else, feels it should not be added to the stable tree, please let <stable(a)vger.kernel.org> know about it. >From 49012d1bf5f78782d398adb984a080a88ba42965 Mon Sep 17 00:00:00 2001 From: Boris Brezillon <boris.brezillon(a)bootlin.com> Date: Thu, 8 Feb 2018 14:43:35 +0100 Subject: clk: bcm2835: Fix ana->maskX definitions From: Boris Brezillon <boris.brezillon(a)bootlin.com> commit 49012d1bf5f78782d398adb984a080a88ba42965 upstream. ana->maskX values are already '~'-ed in bcm2835_pll_set_rate(). Remove the '~' in the definition to fix ANA setup. Note that this commit fixes a long standing bug preventing one from using an HDMI display if it's plugged after the FW has booted Linux. This is because PLLH is used by the HDMI encoder to generate the pixel clock. Fixes: 41691b8862e2 ("clk: bcm2835: Add support for programming the audio domain clocks") Cc: <stable(a)vger.kernel.org> Signed-off-by: Boris Brezillon <boris.brezillon(a)bootlin.com> Reviewed-by: Eric Anholt <eric(a)anholt.net> Signed-off-by: Stephen Boyd <sboyd(a)kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh(a)linuxfoundation.org> --- drivers/clk/bcm/clk-bcm2835.c | 8 ++++---- 1 file changed, 4 insertions(+), 4 deletions(-) --- a/drivers/clk/bcm/clk-bcm2835.c +++ b/drivers/clk/bcm/clk-bcm2835.c @@ -479,17 +479,17 @@ struct bcm2835_pll_ana_bits { static const struct bcm2835_pll_ana_bits bcm2835_ana_default = { .mask0 = 0, .set0 = 0, - .mask1 = (u32)~(A2W_PLL_KI_MASK | A2W_PLL_KP_MASK), + .mask1 = A2W_PLL_KI_MASK | A2W_PLL_KP_MASK, .set1 = (2 << A2W_PLL_KI_SHIFT) | (8 << A2W_PLL_KP_SHIFT), - .mask3 = (u32)~A2W_PLL_KA_MASK, + .mask3 = A2W_PLL_KA_MASK, .set3 = (2 << A2W_PLL_KA_SHIFT), .fb_prediv_mask = BIT(14), }; static const struct bcm2835_pll_ana_bits bcm2835_ana_pllh = { - .mask0 = (u32)~(A2W_PLLH_KA_MASK | A2W_PLLH_KI_LOW_MASK), + .mask0 = A2W_PLLH_KA_MASK | A2W_PLLH_KI_LOW_MASK, .set0 = (2 << A2W_PLLH_KA_SHIFT) | (2 << A2W_PLLH_KI_LOW_SHIFT), - .mask1 = (u32)~(A2W_PLLH_KI_HIGH_MASK | A2W_PLLH_KP_MASK), + .mask1 = A2W_PLLH_KI_HIGH_MASK | A2W_PLLH_KP_MASK, .set1 = (6 << A2W_PLLH_KP_SHIFT), .mask3 = 0, .set3 = 0, Patches currently in stable-queue which might be from boris.brezillon(a)bootlin.com are queue-4.14/clk-bcm2835-protect-sections-updating-shared-registers.patch queue-4.14/clk-bcm2835-fix-ana-maskx-definitions.patch

7 years, 5 months

1
0
0 0

Patch "clk: bcm2835: Protect sections updating shared registers" has been added to the 4.14-stable tree

by gregkh＠linuxfoundation.org

This is a note to let you know that I've just added the patch titled clk: bcm2835: Protect sections updating shared registers to the 4.14-stable tree which can be found at: http://www.kernel.org/git/?p=linux/kernel/git/stable/stable-queue.git;a=sum… The filename of the patch is: clk-bcm2835-protect-sections-updating-shared-registers.patch and it can be found in the queue-4.14 subdirectory. If you, or anyone else, feels it should not be added to the stable tree, please let <stable(a)vger.kernel.org> know about it. >From 7997f3b2df751aab0b8e60149b226a32966c41ac Mon Sep 17 00:00:00 2001 From: Boris Brezillon <boris.brezillon(a)bootlin.com> Date: Thu, 8 Feb 2018 14:43:36 +0100 Subject: clk: bcm2835: Protect sections updating shared registers From: Boris Brezillon <boris.brezillon(a)bootlin.com> commit 7997f3b2df751aab0b8e60149b226a32966c41ac upstream. CM_PLLx and A2W_XOSC_CTRL registers are accessed by different clock handlers and must be accessed with ->regs_lock held. Update the sections where this protection is missing. Fixes: 41691b8862e2 ("clk: bcm2835: Add support for programming the audio domain clocks") Cc: <stable(a)vger.kernel.org> Signed-off-by: Boris Brezillon <boris.brezillon(a)bootlin.com> Reviewed-by: Eric Anholt <eric(a)anholt.net> Signed-off-by: Stephen Boyd <sboyd(a)kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh(a)linuxfoundation.org> --- drivers/clk/bcm/clk-bcm2835.c | 4 ++++ 1 file changed, 4 insertions(+) --- a/drivers/clk/bcm/clk-bcm2835.c +++ b/drivers/clk/bcm/clk-bcm2835.c @@ -653,8 +653,10 @@ static int bcm2835_pll_on(struct clk_hw ~A2W_PLL_CTRL_PWRDN); /* Take the PLL out of reset. */ + spin_lock(&cprman->regs_lock); cprman_write(cprman, data->cm_ctrl_reg, cprman_read(cprman, data->cm_ctrl_reg) & ~CM_PLL_ANARST); + spin_unlock(&cprman->regs_lock); /* Wait for the PLL to lock. */ timeout = ktime_add_ns(ktime_get(), LOCK_TIMEOUT_NS); @@ -731,9 +733,11 @@ static int bcm2835_pll_set_rate(struct c } /* Unmask the reference clock from the oscillator. */ + spin_lock(&cprman->regs_lock); cprman_write(cprman, A2W_XOSC_CTRL, cprman_read(cprman, A2W_XOSC_CTRL) | data->reference_enable_mask); + spin_unlock(&cprman->regs_lock); if (do_ana_setup_first) bcm2835_pll_write_ana(cprman, data->ana_reg_base, ana); Patches currently in stable-queue which might be from boris.brezillon(a)bootlin.com are queue-4.14/clk-bcm2835-protect-sections-updating-shared-registers.patch queue-4.14/clk-bcm2835-fix-ana-maskx-definitions.patch

7 years, 5 months

1
0
0 0

Patch "ALSA: usb-audio: Fix parsing descriptor of UAC2 processing unit" has been added to the 4.14-stable tree

by gregkh＠linuxfoundation.org

This is a note to let you know that I've just added the patch titled ALSA: usb-audio: Fix parsing descriptor of UAC2 processing unit to the 4.14-stable tree which can be found at: http://www.kernel.org/git/?p=linux/kernel/git/stable/stable-queue.git;a=sum… The filename of the patch is: alsa-usb-audio-fix-parsing-descriptor-of-uac2-processing-unit.patch and it can be found in the queue-4.14 subdirectory. If you, or anyone else, feels it should not be added to the stable tree, please let <stable(a)vger.kernel.org> know about it. >From a6618f4aedb2b60932d766bd82ae7ce866e842aa Mon Sep 17 00:00:00 2001 From: Kirill Marinushkin <k.marinushkin(a)gmail.com> Date: Mon, 19 Mar 2018 07:11:08 +0100 Subject: ALSA: usb-audio: Fix parsing descriptor of UAC2 processing unit From: Kirill Marinushkin <k.marinushkin(a)gmail.com> commit a6618f4aedb2b60932d766bd82ae7ce866e842aa upstream. Currently, the offsets in the UAC2 processing unit descriptor are calculated incorrectly. It causes an issue when connecting the device which provides such a feature: ~~~~ [84126.724420] usb 1-1.3.1: invalid Processing Unit descriptor (id 18) ~~~~ After this patch is applied, the UAC2 processing unit inits w/o this error. Fixes: 23caaf19b11e ("ALSA: usb-mixer: Add support for Audio Class v2.0") Signed-off-by: Kirill Marinushkin <k.marinushkin(a)gmail.com> Cc: <stable(a)vger.kernel.org> Signed-off-by: Takashi Iwai <tiwai(a)suse.de> Signed-off-by: Greg Kroah-Hartman <gregkh(a)linuxfoundation.org> --- include/uapi/linux/usb/audio.h | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) --- a/include/uapi/linux/usb/audio.h +++ b/include/uapi/linux/usb/audio.h @@ -370,7 +370,7 @@ static inline __u8 uac_processing_unit_b { return (protocol == UAC_VERSION_1) ? desc->baSourceID[desc->bNrInPins + 4] : - desc->baSourceID[desc->bNrInPins + 6]; + 2; /* in UAC2, this value is constant */ } static inline __u8 *uac_processing_unit_bmControls(struct uac_processing_unit_descriptor *desc, @@ -378,7 +378,7 @@ static inline __u8 *uac_processing_unit_ { return (protocol == UAC_VERSION_1) ? &desc->baSourceID[desc->bNrInPins + 5] : - &desc->baSourceID[desc->bNrInPins + 7]; + &desc->baSourceID[desc->bNrInPins + 6]; } static inline __u8 uac_processing_unit_iProcessing(struct uac_processing_unit_descriptor *desc, Patches currently in stable-queue which might be from k.marinushkin(a)gmail.com are queue-4.14/alsa-usb-audio-fix-parsing-descriptor-of-uac2-processing-unit.patch

7 years, 5 months

1
0
0 0

Patch "ALSA: hda/realtek - Fix speaker no sound after system resume" has been added to the 4.14-stable tree

by gregkh＠linuxfoundation.org

This is a note to let you know that I've just added the patch titled ALSA: hda/realtek - Fix speaker no sound after system resume to the 4.14-stable tree which can be found at: http://www.kernel.org/git/?p=linux/kernel/git/stable/stable-queue.git;a=sum… The filename of the patch is: alsa-hda-realtek-fix-speaker-no-sound-after-system-resume.patch and it can be found in the queue-4.14 subdirectory. If you, or anyone else, feels it should not be added to the stable tree, please let <stable(a)vger.kernel.org> know about it. >From 88d42b2b45d7208cc872c2c9dec0b1ae6c6008d7 Mon Sep 17 00:00:00 2001 From: Kailang Yang <kailang(a)realtek.com> Date: Wed, 14 Mar 2018 16:08:57 +0800 Subject: ALSA: hda/realtek - Fix speaker no sound after system resume From: Kailang Yang <kailang(a)realtek.com> commit 88d42b2b45d7208cc872c2c9dec0b1ae6c6008d7 upstream. It will have a chance speaker no sound after system resume. To toggle NID 0x53 index 0x2 bit 15 will solve this issue. This usage will also suitable with ALC256. Fixes: 4a219ef8f370 ("ALSA: hda/realtek - Add ALC256 HP depop function") Signed-off-by: Kailang Yang <kailang(a)realtek.com> Cc: <stable(a)vger.kernel.org> Signed-off-by: Takashi Iwai <tiwai(a)suse.de> Signed-off-by: Greg Kroah-Hartman <gregkh(a)linuxfoundation.org> --- sound/pci/hda/patch_realtek.c | 4 ++++ 1 file changed, 4 insertions(+) --- a/sound/pci/hda/patch_realtek.c +++ b/sound/pci/hda/patch_realtek.c @@ -3107,6 +3107,8 @@ static void alc256_init(struct hda_codec alc_update_coef_idx(codec, 0x46, 3 << 12, 0); alc_update_coefex_idx(codec, 0x57, 0x04, 0x0007, 0x4); /* Hight power */ + alc_update_coefex_idx(codec, 0x53, 0x02, 0x8000, 1 << 15); /* Clear bit */ + alc_update_coefex_idx(codec, 0x53, 0x02, 0x8000, 0 << 15); } static void alc256_shutup(struct hda_codec *codec) @@ -7004,6 +7006,8 @@ static int patch_alc269(struct hda_codec break; case 0x10ec0257: spec->codec_variant = ALC269_TYPE_ALC257; + spec->shutup = alc256_shutup; + spec->init_hook = alc256_init; spec->gen.mixer_nid = 0; break; case 0x10ec0215: Patches currently in stable-queue which might be from kailang(a)realtek.com are queue-4.14/alsa-hda-realtek-fix-speaker-no-sound-after-system-resume.patch queue-4.14/alsa-hda-realtek-fix-dell-headset-mic-can-t-record.patch

7 years, 5 months

1
0
0 0

Patch "ALSA: hda/realtek - Fix Dell headset Mic can't record" has been added to the 4.14-stable tree

by gregkh＠linuxfoundation.org

This is a note to let you know that I've just added the patch titled ALSA: hda/realtek - Fix Dell headset Mic can't record to the 4.14-stable tree which can be found at: http://www.kernel.org/git/?p=linux/kernel/git/stable/stable-queue.git;a=sum… The filename of the patch is: alsa-hda-realtek-fix-dell-headset-mic-can-t-record.patch and it can be found in the queue-4.14 subdirectory. If you, or anyone else, feels it should not be added to the stable tree, please let <stable(a)vger.kernel.org> know about it. >From f0ba9d699e5ca2bcd07f70185d18720c4f1b597c Mon Sep 17 00:00:00 2001 From: Kailang Yang <kailang(a)realtek.com> Date: Fri, 16 Mar 2018 11:46:08 +0800 Subject: ALSA: hda/realtek - Fix Dell headset Mic can't record From: Kailang Yang <kailang(a)realtek.com> commit f0ba9d699e5ca2bcd07f70185d18720c4f1b597c upstream. This platform was hardware fixed type for CTIA type for headset port. Assigned 0x19 verb will fix can't record issue. Signed-off-by: Kailang Yang <kailang(a)realtek.com> Cc: <stable(a)vger.kernel.org> Signed-off-by: Takashi Iwai <tiwai(a)suse.de> Signed-off-by: Greg Kroah-Hartman <gregkh(a)linuxfoundation.org> --- sound/pci/hda/patch_realtek.c | 10 ++++++++++ 1 file changed, 10 insertions(+) --- a/sound/pci/hda/patch_realtek.c +++ b/sound/pci/hda/patch_realtek.c @@ -5354,6 +5354,7 @@ enum { ALC274_FIXUP_DELL_AIO_LINEOUT_VERB, ALC298_FIXUP_TPT470_DOCK, ALC255_FIXUP_DUMMY_LINEOUT_VERB, + ALC255_FIXUP_DELL_HEADSET_MIC, }; static const struct hda_fixup alc269_fixups[] = { @@ -6214,6 +6215,13 @@ static const struct hda_fixup alc269_fix .chained = true, .chain_id = ALC255_FIXUP_DELL1_MIC_NO_PRESENCE }, + [ALC255_FIXUP_DELL_HEADSET_MIC] = { + .type = HDA_FIXUP_PINS, + .v.pins = (const struct hda_pintbl[]) { + { 0x19, 0x01a1913c }, /* use as headset mic, without its own jack detect */ + { } + }, + }, }; static const struct snd_pci_quirk alc269_fixup_tbl[] = { @@ -6268,6 +6276,8 @@ static const struct snd_pci_quirk alc269 SND_PCI_QUIRK(0x1028, 0x082a, "Dell XPS 13 9360", ALC256_FIXUP_DELL_XPS_13_HEADPHONE_NOISE), SND_PCI_QUIRK(0x1028, 0x084b, "Dell", ALC274_FIXUP_DELL_AIO_LINEOUT_VERB), SND_PCI_QUIRK(0x1028, 0x084e, "Dell", ALC274_FIXUP_DELL_AIO_LINEOUT_VERB), + SND_PCI_QUIRK(0x1028, 0x0871, "Dell Precision 3630", ALC255_FIXUP_DELL_HEADSET_MIC), + SND_PCI_QUIRK(0x1028, 0x0872, "Dell Precision 3630", ALC255_FIXUP_DELL_HEADSET_MIC), SND_PCI_QUIRK(0x1028, 0x0873, "Dell Precision 3930", ALC255_FIXUP_DUMMY_LINEOUT_VERB), SND_PCI_QUIRK(0x1028, 0x164a, "Dell", ALC293_FIXUP_DELL1_MIC_NO_PRESENCE), SND_PCI_QUIRK(0x1028, 0x164b, "Dell", ALC293_FIXUP_DELL1_MIC_NO_PRESENCE), Patches currently in stable-queue which might be from kailang(a)realtek.com are queue-4.14/alsa-hda-realtek-fix-speaker-no-sound-after-system-resume.patch queue-4.14/alsa-hda-realtek-fix-dell-headset-mic-can-t-record.patch

7 years, 5 months

1
0
0 0

Patch "ALSA: hda/realtek - Always immediately update mute LED with pin VREF" has been added to the 4.14-stable tree

by gregkh＠linuxfoundation.org

This is a note to let you know that I've just added the patch titled ALSA: hda/realtek - Always immediately update mute LED with pin VREF to the 4.14-stable tree which can be found at: http://www.kernel.org/git/?p=linux/kernel/git/stable/stable-queue.git;a=sum… The filename of the patch is: alsa-hda-realtek-always-immediately-update-mute-led-with-pin-vref.patch and it can be found in the queue-4.14 subdirectory. If you, or anyone else, feels it should not be added to the stable tree, please let <stable(a)vger.kernel.org> know about it. >From e40bdb03d3cd7da66bd0bc1e40cbcfb49351265c Mon Sep 17 00:00:00 2001 From: Takashi Iwai <tiwai(a)suse.de> Date: Sat, 17 Mar 2018 22:40:18 +0100 Subject: ALSA: hda/realtek - Always immediately update mute LED with pin VREF From: Takashi Iwai <tiwai(a)suse.de> commit e40bdb03d3cd7da66bd0bc1e40cbcfb49351265c upstream. Some HP laptops have a mute mute LED controlled by a pin VREF. The Realtek codec driver updates the VREF via vmaster hook by calling snd_hda_set_pin_ctl_cache(). This works fine as long as the driver is running in a normal mode. However, when the VREF change happens during the codec being in runtime PM suspend, the regmap access will skip and postpone the actual register change. This ends up with the unchanged LED status until the next runtime PM resume even if you change the Master mute switch. (Interestingly, the machine keeps the LED status even after the codec goes into D3 -- but it's another story.) For improving this usability, let the driver temporarily powering up / down only during the pin VREF change. This can be achieved easily by wrapping the call with snd_hda_power_up_pm() / *_down_pm(). Bugzilla: https://bugzilla.kernel.org/show_bug.cgi?id=199073 Cc: <stable(a)vger.kernel.org> Signed-off-by: Takashi Iwai <tiwai(a)suse.de> Signed-off-by: Greg Kroah-Hartman <gregkh(a)linuxfoundation.org> --- sound/pci/hda/patch_realtek.c | 6 +++++- 1 file changed, 5 insertions(+), 1 deletion(-) --- a/sound/pci/hda/patch_realtek.c +++ b/sound/pci/hda/patch_realtek.c @@ -3488,8 +3488,12 @@ static void alc269_fixup_mic_mute_hook(v pinval = snd_hda_codec_get_pin_target(codec, spec->mute_led_nid); pinval &= ~AC_PINCTL_VREFEN; pinval |= enabled ? AC_PINCTL_VREF_HIZ : AC_PINCTL_VREF_80; - if (spec->mute_led_nid) + if (spec->mute_led_nid) { + /* temporarily power up/down for setting VREF */ + snd_hda_power_up_pm(codec); snd_hda_set_pin_ctl_cache(codec, spec->mute_led_nid, pinval); + snd_hda_power_down_pm(codec); + } } /* Make sure the led works even in runtime suspend */ Patches currently in stable-queue which might be from tiwai(a)suse.de are queue-4.14/alsa-aloop-fix-access-to-not-yet-ready-substream-via-cable.patch queue-4.14/alsa-hda-realtek-fix-speaker-no-sound-after-system-resume.patch queue-4.14/alsa-hda-realtek-fix-dell-headset-mic-can-t-record.patch queue-4.14/alsa-hda-realtek-always-immediately-update-mute-led-with-pin-vref.patch queue-4.14/alsa-usb-audio-fix-parsing-descriptor-of-uac2-processing-unit.patch queue-4.14/alsa-aloop-sync-stale-timer-before-release.patch queue-4.14/alsa-hda-force-polling-mode-on-cfl-for-fixing-codec-communication.patch

7 years, 5 months

1
0
0 0

Patch "ALSA: hda - Force polling mode on CFL for fixing codec communication" has been added to the 4.14-stable tree

by gregkh＠linuxfoundation.org

This is a note to let you know that I've just added the patch titled ALSA: hda - Force polling mode on CFL for fixing codec communication to the 4.14-stable tree which can be found at: http://www.kernel.org/git/?p=linux/kernel/git/stable/stable-queue.git;a=sum… The filename of the patch is: alsa-hda-force-polling-mode-on-cfl-for-fixing-codec-communication.patch and it can be found in the queue-4.14 subdirectory. If you, or anyone else, feels it should not be added to the stable tree, please let <stable(a)vger.kernel.org> know about it. >From a8d7bde23e7130686b76624b099f3e22dd38aef7 Mon Sep 17 00:00:00 2001 From: Takashi Iwai <tiwai(a)suse.de> Date: Wed, 21 Mar 2018 10:06:13 +0100 Subject: ALSA: hda - Force polling mode on CFL for fixing codec communication From: Takashi Iwai <tiwai(a)suse.de> commit a8d7bde23e7130686b76624b099f3e22dd38aef7 upstream. We've observed too long probe time with Coffee Lake (CFL) machines, and the likely cause is some communication problem between the HD-audio controller and the codec chips. While the controller expects an IRQ wakeup for each codec response, it seems sometimes missing, and it takes one second for the controller driver to time out and read the response in the polling mode. Although we aren't sure about the real culprit yet, in this patch, we put a workaround by forcing the polling mode as default for CFL machines; the polling mode itself isn't too heavy, and much better than other workarounds initially suggested (e.g. disabling power-save), at least. Bugzilla: https://bugzilla.kernel.org/show_bug.cgi?id=199007 Fixes: e79b0006c45c ("ALSA: hda - Add Coffelake PCI ID") Reported-and-tested-by: Hui Wang <hui.wang(a)canonical.com> Cc: <stable(a)vger.kernel.org> Signed-off-by: Takashi Iwai <tiwai(a)suse.de> Signed-off-by: Greg Kroah-Hartman <gregkh(a)linuxfoundation.org> --- sound/pci/hda/hda_intel.c | 5 +++++ 1 file changed, 5 insertions(+) --- a/sound/pci/hda/hda_intel.c +++ b/sound/pci/hda/hda_intel.c @@ -375,6 +375,7 @@ enum { ((pci)->device == 0x160c)) #define IS_BXT(pci) ((pci)->vendor == 0x8086 && (pci)->device == 0x5a98) +#define IS_CFL(pci) ((pci)->vendor == 0x8086 && (pci)->device == 0xa348) static char *driver_short_names[] = { [AZX_DRIVER_ICH] = "HDA Intel", @@ -1744,6 +1745,10 @@ static int azx_create(struct snd_card *c else chip->bdl_pos_adj = bdl_pos_adj[dev]; + /* Workaround for a communication error on CFL (bko#199007) */ + if (IS_CFL(pci)) + chip->polling_mode = 1; + err = azx_bus_init(chip, model[dev], &pci_hda_io_ops); if (err < 0) { kfree(hda); Patches currently in stable-queue which might be from tiwai(a)suse.de are queue-4.14/alsa-aloop-fix-access-to-not-yet-ready-substream-via-cable.patch queue-4.14/alsa-hda-realtek-fix-speaker-no-sound-after-system-resume.patch queue-4.14/alsa-hda-realtek-fix-dell-headset-mic-can-t-record.patch queue-4.14/alsa-hda-realtek-always-immediately-update-mute-led-with-pin-vref.patch queue-4.14/alsa-usb-audio-fix-parsing-descriptor-of-uac2-processing-unit.patch queue-4.14/alsa-aloop-sync-stale-timer-before-release.patch queue-4.14/alsa-hda-force-polling-mode-on-cfl-for-fixing-codec-communication.patch

7 years, 5 months

1
0
0 0

Patch "ALSA: aloop: Fix access to not-yet-ready substream via cable" has been added to the 4.14-stable tree

by gregkh＠linuxfoundation.org

This is a note to let you know that I've just added the patch titled ALSA: aloop: Fix access to not-yet-ready substream via cable to the 4.14-stable tree which can be found at: http://www.kernel.org/git/?p=linux/kernel/git/stable/stable-queue.git;a=sum… The filename of the patch is: alsa-aloop-fix-access-to-not-yet-ready-substream-via-cable.patch and it can be found in the queue-4.14 subdirectory. If you, or anyone else, feels it should not be added to the stable tree, please let <stable(a)vger.kernel.org> know about it. >From 8e6b1a72a75bb5067ccb6b56d8ca4aa3a300a64e Mon Sep 17 00:00:00 2001 From: Takashi Iwai <tiwai(a)suse.de> Date: Thu, 22 Mar 2018 10:40:27 +0100 Subject: ALSA: aloop: Fix access to not-yet-ready substream via cable From: Takashi Iwai <tiwai(a)suse.de> commit 8e6b1a72a75bb5067ccb6b56d8ca4aa3a300a64e upstream. In loopback_open() and loopback_close(), we assign and release the substream object to the corresponding cable in a racy way. It's neither locked nor done in the right position. The open callback assigns the substream before its preparation finishes, hence the other side of the cable may pick it up, which may lead to the invalid memory access. This patch addresses these: move the assignment to the end of the open callback, and wrap with cable->lock for avoiding concurrent accesses. Cc: <stable(a)vger.kernel.org> Signed-off-by: Takashi Iwai <tiwai(a)suse.de> Signed-off-by: Greg Kroah-Hartman <gregkh(a)linuxfoundation.org> --- sound/drivers/aloop.c | 8 +++++++- 1 file changed, 7 insertions(+), 1 deletion(-) --- a/sound/drivers/aloop.c +++ b/sound/drivers/aloop.c @@ -666,7 +666,9 @@ static void free_cable(struct snd_pcm_su return; if (cable->streams[!substream->stream]) { /* other stream is still alive */ + spin_lock_irq(&cable->lock); cable->streams[substream->stream] = NULL; + spin_unlock_irq(&cable->lock); } else { /* free the cable */ loopback->cables[substream->number][dev] = NULL; @@ -706,7 +708,6 @@ static int loopback_open(struct snd_pcm_ loopback->cables[substream->number][dev] = cable; } dpcm->cable = cable; - cable->streams[substream->stream] = dpcm; snd_pcm_hw_constraint_integer(runtime, SNDRV_PCM_HW_PARAM_PERIODS); @@ -738,6 +739,11 @@ static int loopback_open(struct snd_pcm_ runtime->hw = loopback_pcm_hardware; else runtime->hw = cable->hw; + + spin_lock_irq(&cable->lock); + cable->streams[substream->stream] = dpcm; + spin_unlock_irq(&cable->lock); + unlock: if (err < 0) { free_cable(substream); Patches currently in stable-queue which might be from tiwai(a)suse.de are queue-4.14/alsa-aloop-fix-access-to-not-yet-ready-substream-via-cable.patch queue-4.14/alsa-hda-realtek-fix-speaker-no-sound-after-system-resume.patch queue-4.14/alsa-hda-realtek-fix-dell-headset-mic-can-t-record.patch queue-4.14/alsa-hda-realtek-always-immediately-update-mute-led-with-pin-vref.patch queue-4.14/alsa-usb-audio-fix-parsing-descriptor-of-uac2-processing-unit.patch queue-4.14/alsa-aloop-sync-stale-timer-before-release.patch queue-4.14/alsa-hda-force-polling-mode-on-cfl-for-fixing-codec-communication.patch

7 years, 5 months

1
0
0 0

Patch "ALSA: aloop: Sync stale timer before release" has been added to the 4.14-stable tree

by gregkh＠linuxfoundation.org

This is a note to let you know that I've just added the patch titled ALSA: aloop: Sync stale timer before release to the 4.14-stable tree which can be found at: http://www.kernel.org/git/?p=linux/kernel/git/stable/stable-queue.git;a=sum… The filename of the patch is: alsa-aloop-sync-stale-timer-before-release.patch and it can be found in the queue-4.14 subdirectory. If you, or anyone else, feels it should not be added to the stable tree, please let <stable(a)vger.kernel.org> know about it. >From 67a01afaf3d34893cf7d2ea19b34555d6abb7cb0 Mon Sep 17 00:00:00 2001 From: Takashi Iwai <tiwai(a)suse.de> Date: Thu, 22 Mar 2018 08:56:06 +0100 Subject: ALSA: aloop: Sync stale timer before release From: Takashi Iwai <tiwai(a)suse.de> commit 67a01afaf3d34893cf7d2ea19b34555d6abb7cb0 upstream. The aloop driver tries to stop the pending timer via timer_del() in the trigger callback and in the close callback. The former is correct, as it's an atomic operation, while the latter expects that the timer gets really removed and proceeds the resource releases after that. But timer_del() doesn't synchronize, hence the running timer may still access the released resources. A similar situation can be also seen in the prepare callback after trigger(STOP) where the prepare tries to re-initialize the things while a timer is still running. The problems like the above are seen indirectly in some syzkaller reports (although it's not 100% clear whether this is the only cause, as the race condition is quite narrow and not always easy to trigger). For addressing these issues, this patch adds the explicit alls of timer_del_sync() in some places, so that the pending timer is properly killed / synced. Cc: <stable(a)vger.kernel.org> Signed-off-by: Takashi Iwai <tiwai(a)suse.de> Signed-off-by: Greg Kroah-Hartman <gregkh(a)linuxfoundation.org> --- sound/drivers/aloop.c | 9 ++++++++- 1 file changed, 8 insertions(+), 1 deletion(-) --- a/sound/drivers/aloop.c +++ b/sound/drivers/aloop.c @@ -192,6 +192,11 @@ static inline void loopback_timer_stop(s dpcm->timer.expires = 0; } +static inline void loopback_timer_stop_sync(struct loopback_pcm *dpcm) +{ + del_timer_sync(&dpcm->timer); +} + #define CABLE_VALID_PLAYBACK (1 << SNDRV_PCM_STREAM_PLAYBACK) #define CABLE_VALID_CAPTURE (1 << SNDRV_PCM_STREAM_CAPTURE) #define CABLE_VALID_BOTH (CABLE_VALID_PLAYBACK|CABLE_VALID_CAPTURE) @@ -326,6 +331,8 @@ static int loopback_prepare(struct snd_p struct loopback_cable *cable = dpcm->cable; int bps, salign; + loopback_timer_stop_sync(dpcm); + salign = (snd_pcm_format_width(runtime->format) * runtime->channels) / 8; bps = salign * runtime->rate; @@ -745,7 +752,7 @@ static int loopback_close(struct snd_pcm struct loopback *loopback = substream->private_data; struct loopback_pcm *dpcm = substream->runtime->private_data; - loopback_timer_stop(dpcm); + loopback_timer_stop_sync(dpcm); mutex_lock(&loopback->cable_lock); free_cable(substream); mutex_unlock(&loopback->cable_lock); Patches currently in stable-queue which might be from tiwai(a)suse.de are queue-4.14/alsa-aloop-fix-access-to-not-yet-ready-substream-via-cable.patch queue-4.14/alsa-hda-realtek-fix-speaker-no-sound-after-system-resume.patch queue-4.14/alsa-hda-realtek-fix-dell-headset-mic-can-t-record.patch queue-4.14/alsa-hda-realtek-always-immediately-update-mute-led-with-pin-vref.patch queue-4.14/alsa-usb-audio-fix-parsing-descriptor-of-uac2-processing-unit.patch queue-4.14/alsa-aloop-sync-stale-timer-before-release.patch queue-4.14/alsa-hda-force-polling-mode-on-cfl-for-fixing-codec-communication.patch

7 years, 5 months

1
0
0 0

Patch "ahci: Add PCI-id for the Highpoint Rocketraid 644L card" has been added to the 4.14-stable tree

by gregkh＠linuxfoundation.org

This is a note to let you know that I've just added the patch titled ahci: Add PCI-id for the Highpoint Rocketraid 644L card to the 4.14-stable tree which can be found at: http://www.kernel.org/git/?p=linux/kernel/git/stable/stable-queue.git;a=sum… The filename of the patch is: ahci-add-pci-id-for-the-highpoint-rocketraid-644l-card.patch and it can be found in the queue-4.14 subdirectory. If you, or anyone else, feels it should not be added to the stable tree, please let <stable(a)vger.kernel.org> know about it. >From 28b2182dad43f6f8fcbd167539a26714fd12bd64 Mon Sep 17 00:00:00 2001 From: Hans de Goede <hdegoede(a)redhat.com> Date: Fri, 2 Mar 2018 11:36:32 +0100 Subject: ahci: Add PCI-id for the Highpoint Rocketraid 644L card From: Hans de Goede <hdegoede(a)redhat.com> commit 28b2182dad43f6f8fcbd167539a26714fd12bd64 upstream. Like the Highpoint Rocketraid 642L and cards using a Marvel 88SE9235 controller in general, this RAID card also supports AHCI mode and short of a custom driver, this is the only way to make it work under Linux. Note that even though the card is called to 644L, it has a product-id of 0x0645. Cc: stable(a)vger.kernel.org BugLink: https://bugzilla.redhat.com/show_bug.cgi?id=1534106 Signed-off-by: Hans de Goede <hdegoede(a)redhat.com> Signed-off-by: Tejun Heo <tj(a)kernel.org> Acked-by: Bjorn Helgaas <bhelgaas(a)google.com> Signed-off-by: Greg Kroah-Hartman <gregkh(a)linuxfoundation.org> --- drivers/ata/ahci.c | 4 +++- 1 file changed, 3 insertions(+), 1 deletion(-) --- a/drivers/ata/ahci.c +++ b/drivers/ata/ahci.c @@ -541,7 +541,9 @@ static const struct pci_device_id ahci_p .driver_data = board_ahci_yes_fbs }, { PCI_DEVICE(PCI_VENDOR_ID_MARVELL_EXT, 0x9230), .driver_data = board_ahci_yes_fbs }, - { PCI_DEVICE(PCI_VENDOR_ID_TTI, 0x0642), + { PCI_DEVICE(PCI_VENDOR_ID_TTI, 0x0642), /* highpoint rocketraid 642L */ + .driver_data = board_ahci_yes_fbs }, + { PCI_DEVICE(PCI_VENDOR_ID_TTI, 0x0645), /* highpoint rocketraid 644L */ .driver_data = board_ahci_yes_fbs }, /* Promise */ Patches currently in stable-queue which might be from hdegoede(a)redhat.com are queue-4.14/pci-add-function-1-dma-alias-quirk-for-highpoint-rocketraid-644l.patch queue-4.14/ahci-add-pci-id-for-the-highpoint-rocketraid-644l-card.patch

7 years, 5 months

1
0
0 0

Patch "ALSA: usb-audio: Fix parsing descriptor of UAC2 processing unit" has been added to the 3.18-stable tree

by gregkh＠linuxfoundation.org

This is a note to let you know that I've just added the patch titled ALSA: usb-audio: Fix parsing descriptor of UAC2 processing unit to the 3.18-stable tree which can be found at: http://www.kernel.org/git/?p=linux/kernel/git/stable/stable-queue.git;a=sum… The filename of the patch is: alsa-usb-audio-fix-parsing-descriptor-of-uac2-processing-unit.patch and it can be found in the queue-3.18 subdirectory. If you, or anyone else, feels it should not be added to the stable tree, please let <stable(a)vger.kernel.org> know about it. >From a6618f4aedb2b60932d766bd82ae7ce866e842aa Mon Sep 17 00:00:00 2001 From: Kirill Marinushkin <k.marinushkin(a)gmail.com> Date: Mon, 19 Mar 2018 07:11:08 +0100 Subject: ALSA: usb-audio: Fix parsing descriptor of UAC2 processing unit From: Kirill Marinushkin <k.marinushkin(a)gmail.com> commit a6618f4aedb2b60932d766bd82ae7ce866e842aa upstream. Currently, the offsets in the UAC2 processing unit descriptor are calculated incorrectly. It causes an issue when connecting the device which provides such a feature: ~~~~ [84126.724420] usb 1-1.3.1: invalid Processing Unit descriptor (id 18) ~~~~ After this patch is applied, the UAC2 processing unit inits w/o this error. Fixes: 23caaf19b11e ("ALSA: usb-mixer: Add support for Audio Class v2.0") Signed-off-by: Kirill Marinushkin <k.marinushkin(a)gmail.com> Cc: <stable(a)vger.kernel.org> Signed-off-by: Takashi Iwai <tiwai(a)suse.de> Signed-off-by: Greg Kroah-Hartman <gregkh(a)linuxfoundation.org> --- include/uapi/linux/usb/audio.h | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) --- a/include/uapi/linux/usb/audio.h +++ b/include/uapi/linux/usb/audio.h @@ -369,7 +369,7 @@ static inline __u8 uac_processing_unit_b { return (protocol == UAC_VERSION_1) ? desc->baSourceID[desc->bNrInPins + 4] : - desc->baSourceID[desc->bNrInPins + 6]; + 2; /* in UAC2, this value is constant */ } static inline __u8 *uac_processing_unit_bmControls(struct uac_processing_unit_descriptor *desc, @@ -377,7 +377,7 @@ static inline __u8 *uac_processing_unit_ { return (protocol == UAC_VERSION_1) ? &desc->baSourceID[desc->bNrInPins + 5] : - &desc->baSourceID[desc->bNrInPins + 7]; + &desc->baSourceID[desc->bNrInPins + 6]; } static inline __u8 uac_processing_unit_iProcessing(struct uac_processing_unit_descriptor *desc, Patches currently in stable-queue which might be from k.marinushkin(a)gmail.com are queue-3.18/alsa-usb-audio-fix-parsing-descriptor-of-uac2-processing-unit.patch

7 years, 5 months

1
0
0 0

Patch "ALSA: aloop: Sync stale timer before release" has been added to the 3.18-stable tree

by gregkh＠linuxfoundation.org

This is a note to let you know that I've just added the patch titled ALSA: aloop: Sync stale timer before release to the 3.18-stable tree which can be found at: http://www.kernel.org/git/?p=linux/kernel/git/stable/stable-queue.git;a=sum… The filename of the patch is: alsa-aloop-sync-stale-timer-before-release.patch and it can be found in the queue-3.18 subdirectory. If you, or anyone else, feels it should not be added to the stable tree, please let <stable(a)vger.kernel.org> know about it. >From 67a01afaf3d34893cf7d2ea19b34555d6abb7cb0 Mon Sep 17 00:00:00 2001 From: Takashi Iwai <tiwai(a)suse.de> Date: Thu, 22 Mar 2018 08:56:06 +0100 Subject: ALSA: aloop: Sync stale timer before release From: Takashi Iwai <tiwai(a)suse.de> commit 67a01afaf3d34893cf7d2ea19b34555d6abb7cb0 upstream. The aloop driver tries to stop the pending timer via timer_del() in the trigger callback and in the close callback. The former is correct, as it's an atomic operation, while the latter expects that the timer gets really removed and proceeds the resource releases after that. But timer_del() doesn't synchronize, hence the running timer may still access the released resources. A similar situation can be also seen in the prepare callback after trigger(STOP) where the prepare tries to re-initialize the things while a timer is still running. The problems like the above are seen indirectly in some syzkaller reports (although it's not 100% clear whether this is the only cause, as the race condition is quite narrow and not always easy to trigger). For addressing these issues, this patch adds the explicit alls of timer_del_sync() in some places, so that the pending timer is properly killed / synced. Cc: <stable(a)vger.kernel.org> Signed-off-by: Takashi Iwai <tiwai(a)suse.de> Signed-off-by: Greg Kroah-Hartman <gregkh(a)linuxfoundation.org> --- sound/drivers/aloop.c | 9 ++++++++- 1 file changed, 8 insertions(+), 1 deletion(-) --- a/sound/drivers/aloop.c +++ b/sound/drivers/aloop.c @@ -193,6 +193,11 @@ static inline void loopback_timer_stop(s dpcm->timer.expires = 0; } +static inline void loopback_timer_stop_sync(struct loopback_pcm *dpcm) +{ + del_timer_sync(&dpcm->timer); +} + #define CABLE_VALID_PLAYBACK (1 << SNDRV_PCM_STREAM_PLAYBACK) #define CABLE_VALID_CAPTURE (1 << SNDRV_PCM_STREAM_CAPTURE) #define CABLE_VALID_BOTH (CABLE_VALID_PLAYBACK|CABLE_VALID_CAPTURE) @@ -327,6 +332,8 @@ static int loopback_prepare(struct snd_p struct loopback_cable *cable = dpcm->cable; int bps, salign; + loopback_timer_stop_sync(dpcm); + salign = (snd_pcm_format_width(runtime->format) * runtime->channels) / 8; bps = salign * runtime->rate; @@ -746,7 +753,7 @@ static int loopback_close(struct snd_pcm struct loopback *loopback = substream->private_data; struct loopback_pcm *dpcm = substream->runtime->private_data; - loopback_timer_stop(dpcm); + loopback_timer_stop_sync(dpcm); mutex_lock(&loopback->cable_lock); free_cable(substream); mutex_unlock(&loopback->cable_lock); Patches currently in stable-queue which might be from tiwai(a)suse.de are queue-3.18/alsa-aloop-fix-access-to-not-yet-ready-substream-via-cable.patch queue-3.18/alsa-usb-audio-fix-parsing-descriptor-of-uac2-processing-unit.patch queue-3.18/alsa-aloop-sync-stale-timer-before-release.patch

7 years, 5 months

1
0
0 0

Patch "ALSA: aloop: Fix access to not-yet-ready substream via cable" has been added to the 3.18-stable tree

by gregkh＠linuxfoundation.org

This is a note to let you know that I've just added the patch titled ALSA: aloop: Fix access to not-yet-ready substream via cable to the 3.18-stable tree which can be found at: http://www.kernel.org/git/?p=linux/kernel/git/stable/stable-queue.git;a=sum… The filename of the patch is: alsa-aloop-fix-access-to-not-yet-ready-substream-via-cable.patch and it can be found in the queue-3.18 subdirectory. If you, or anyone else, feels it should not be added to the stable tree, please let <stable(a)vger.kernel.org> know about it. >From 8e6b1a72a75bb5067ccb6b56d8ca4aa3a300a64e Mon Sep 17 00:00:00 2001 From: Takashi Iwai <tiwai(a)suse.de> Date: Thu, 22 Mar 2018 10:40:27 +0100 Subject: ALSA: aloop: Fix access to not-yet-ready substream via cable From: Takashi Iwai <tiwai(a)suse.de> commit 8e6b1a72a75bb5067ccb6b56d8ca4aa3a300a64e upstream. In loopback_open() and loopback_close(), we assign and release the substream object to the corresponding cable in a racy way. It's neither locked nor done in the right position. The open callback assigns the substream before its preparation finishes, hence the other side of the cable may pick it up, which may lead to the invalid memory access. This patch addresses these: move the assignment to the end of the open callback, and wrap with cable->lock for avoiding concurrent accesses. Cc: <stable(a)vger.kernel.org> Signed-off-by: Takashi Iwai <tiwai(a)suse.de> Signed-off-by: Greg Kroah-Hartman <gregkh(a)linuxfoundation.org> --- sound/drivers/aloop.c | 8 +++++++- 1 file changed, 7 insertions(+), 1 deletion(-) --- a/sound/drivers/aloop.c +++ b/sound/drivers/aloop.c @@ -667,7 +667,9 @@ static void free_cable(struct snd_pcm_su return; if (cable->streams[!substream->stream]) { /* other stream is still alive */ + spin_lock_irq(&cable->lock); cable->streams[substream->stream] = NULL; + spin_unlock_irq(&cable->lock); } else { /* free the cable */ loopback->cables[substream->number][dev] = NULL; @@ -707,7 +709,6 @@ static int loopback_open(struct snd_pcm_ loopback->cables[substream->number][dev] = cable; } dpcm->cable = cable; - cable->streams[substream->stream] = dpcm; snd_pcm_hw_constraint_integer(runtime, SNDRV_PCM_HW_PARAM_PERIODS); @@ -739,6 +740,11 @@ static int loopback_open(struct snd_pcm_ runtime->hw = loopback_pcm_hardware; else runtime->hw = cable->hw; + + spin_lock_irq(&cable->lock); + cable->streams[substream->stream] = dpcm; + spin_unlock_irq(&cable->lock); + unlock: if (err < 0) { free_cable(substream); Patches currently in stable-queue which might be from tiwai(a)suse.de are queue-3.18/alsa-aloop-fix-access-to-not-yet-ready-substream-via-cable.patch queue-3.18/alsa-usb-audio-fix-parsing-descriptor-of-uac2-processing-unit.patch queue-3.18/alsa-aloop-sync-stale-timer-before-release.patch

7 years, 5 months

1
0
0 0

FAILED: patch "[PATCH] RDMA/mlx5: Fix crash while accessing garbage pointer and" failed to apply to 4.4-stable tree

by gregkh＠linuxfoundation.org

The patch below does not apply to the 4.4-stable tree. If someone wants it applied there, or to any other stable or longterm tree, then please email the backport, including the original git commit id to <stable(a)vger.kernel.org>. thanks, greg k-h ------------------ original commit in Linus's tree ------------------ >From f3f134f5260ae9ee1f5a4d0a8cc625c6c77655b4 Mon Sep 17 00:00:00 2001 From: Leon Romanovsky <leonro(a)mellanox.com> Date: Mon, 12 Mar 2018 21:26:37 +0200 Subject: [PATCH] RDMA/mlx5: Fix crash while accessing garbage pointer and freed memory The failure in rereg_mr flow caused to set garbage value (error value) into mr->umem pointer. This pointer is accessed at the release stage and it causes to the following crash. There is not enough to simply change umem to point to NULL, because the MR struct is needed to be accessed during MR deregistration phase, so delay kfree too. [ 6.237617] BUG: unable to handle kernel NULL pointer dereference a 0000000000000228 [ 6.238756] IP: ib_dereg_mr+0xd/0x30 [ 6.239264] PGD 80000000167eb067 P4D 80000000167eb067 PUD 167f9067 PMD 0 [ 6.240320] Oops: 0000 [#1] SMP PTI [ 6.240782] CPU: 0 PID: 367 Comm: dereg Not tainted 4.16.0-rc1-00029-gc198fafe0453 #183 [ 6.242120] Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS rel-1.7.5-0-ge51488c-20140602_164612-nilsson.home.kraxel.org 04/01/2014 [ 6.244504] RIP: 0010:ib_dereg_mr+0xd/0x30 [ 6.245253] RSP: 0018:ffffaf5d001d7d68 EFLAGS: 00010246 [ 6.246100] RAX: 0000000000000000 RBX: ffff95d4172daf00 RCX: 0000000000000000 [ 6.247414] RDX: 00000000ffffffff RSI: 0000000000000001 RDI: ffff95d41a317600 [ 6.248591] RBP: 0000000000000001 R08: 0000000000000000 R09: 0000000000000000 [ 6.249810] R10: ffff95d417033c10 R11: 0000000000000000 R12: ffff95d4172c3a80 [ 6.251121] R13: ffff95d4172c3720 R14: ffff95d4172c3a98 R15: 00000000ffffffff [ 6.252437] FS: 0000000000000000(0000) GS:ffff95d41fc00000(0000) knlGS:0000000000000000 [ 6.253887] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [ 6.254814] CR2: 0000000000000228 CR3: 00000000172b4000 CR4: 00000000000006b0 [ 6.255943] Call Trace: [ 6.256368] remove_commit_idr_uobject+0x1b/0x80 [ 6.257118] uverbs_cleanup_ucontext+0xe4/0x190 [ 6.257855] ib_uverbs_cleanup_ucontext.constprop.14+0x19/0x40 [ 6.258857] ib_uverbs_close+0x2a/0x100 [ 6.259494] __fput+0xca/0x1c0 [ 6.259938] task_work_run+0x84/0xa0 [ 6.260519] do_exit+0x312/0xb40 [ 6.261023] ? __do_page_fault+0x24d/0x490 [ 6.261707] do_group_exit+0x3a/0xa0 [ 6.262267] SyS_exit_group+0x10/0x10 [ 6.262802] do_syscall_64+0x75/0x180 [ 6.263391] entry_SYSCALL_64_after_hwframe+0x21/0x86 [ 6.264253] RIP: 0033:0x7f1b39c49488 [ 6.264827] RSP: 002b:00007ffe2de05b68 EFLAGS: 00000246 ORIG_RAX: 00000000000000e7 [ 6.266049] RAX: ffffffffffffffda RBX: 0000000000000000 RCX: 00007f1b39c49488 [ 6.267187] RDX: 0000000000000000 RSI: 000000000000003c RDI: 0000000000000000 [ 6.268377] RBP: 00007f1b39f258e0 R08: 00000000000000e7 R09: ffffffffffffff98 [ 6.269640] R10: 00007f1b3a147260 R11: 0000000000000246 R12: 00007f1b39f258e0 [ 6.270783] R13: 00007f1b39f2ac20 R14: 0000000000000000 R15: 0000000000000000 [ 6.271943] Code: 74 07 31 d2 e9 25 d8 6c 00 b8 da ff ff ff c3 0f 1f 44 00 00 66 2e 0f 1f 84 00 00 00 00 00 0f 1f 44 00 00 48 8b 07 53 48 8b 5f 08 <48> 8b 80 28 02 00 00 e8 f7 d7 6c 00 85 c0 75 04 3e ff 4b 18 5b [ 6.274927] RIP: ib_dereg_mr+0xd/0x30 RSP: ffffaf5d001d7d68 [ 6.275760] CR2: 0000000000000228 [ 6.276200] ---[ end trace a35641f1c474bd20 ]--- Fixes: e126ba97dba9 ("mlx5: Add driver for Mellanox Connect-IB adapters") Cc: syzkaller <syzkaller(a)googlegroups.com> Cc: <stable(a)vger.kernel.org> Reported-by: Noa Osherovich <noaos(a)mellanox.com> Signed-off-by: Leon Romanovsky <leonro(a)mellanox.com> Signed-off-by: Doug Ledford <dledford(a)redhat.com> diff --git a/drivers/infiniband/hw/mlx5/mr.c b/drivers/infiniband/hw/mlx5/mr.c index 1961c6a45437..c51c602f06d6 100644 --- a/drivers/infiniband/hw/mlx5/mr.c +++ b/drivers/infiniband/hw/mlx5/mr.c @@ -838,7 +838,8 @@ static int mr_umem_get(struct ib_pd *pd, u64 start, u64 length, *umem = ib_umem_get(pd->uobject->context, start, length, access_flags, 0); err = PTR_ERR_OR_ZERO(*umem); - if (err < 0) { + if (err) { + *umem = NULL; mlx5_ib_err(dev, "umem get failed (%d)\n", err); return err; } @@ -1415,6 +1416,7 @@ int mlx5_ib_rereg_user_mr(struct ib_mr *ib_mr, int flags, u64 start, if (err) { mlx5_ib_warn(dev, "Failed to rereg UMR\n"); ib_umem_release(mr->umem); + mr->umem = NULL; clean_mr(dev, mr); return err; } @@ -1498,14 +1500,11 @@ static int clean_mr(struct mlx5_ib_dev *dev, struct mlx5_ib_mr *mr) u32 key = mr->mmkey.key; err = destroy_mkey(dev, mr); - kfree(mr); if (err) { mlx5_ib_warn(dev, "failed to destroy mkey 0x%x (%d)\n", key, err); return err; } - } else { - mlx5_mr_cache_free(dev, mr); } return 0; @@ -1548,6 +1547,11 @@ static int dereg_mr(struct mlx5_ib_dev *dev, struct mlx5_ib_mr *mr) atomic_sub(npages, &dev->mdev->priv.reg_pages); } + if (!mr->allocated_from_cache) + kfree(mr); + else + mlx5_mr_cache_free(dev, mr); + return 0; }

7 years, 5 months

1
0
0 0

FAILED: patch "[PATCH] RDMA/mlx5: Fix crash while accessing garbage pointer and" failed to apply to 4.9-stable tree

by gregkh＠linuxfoundation.org

The patch below does not apply to the 4.9-stable tree. If someone wants it applied there, or to any other stable or longterm tree, then please email the backport, including the original git commit id to <stable(a)vger.kernel.org>. thanks, greg k-h ------------------ original commit in Linus's tree ------------------ >From f3f134f5260ae9ee1f5a4d0a8cc625c6c77655b4 Mon Sep 17 00:00:00 2001 From: Leon Romanovsky <leonro(a)mellanox.com> Date: Mon, 12 Mar 2018 21:26:37 +0200 Subject: [PATCH] RDMA/mlx5: Fix crash while accessing garbage pointer and freed memory The failure in rereg_mr flow caused to set garbage value (error value) into mr->umem pointer. This pointer is accessed at the release stage and it causes to the following crash. There is not enough to simply change umem to point to NULL, because the MR struct is needed to be accessed during MR deregistration phase, so delay kfree too. [ 6.237617] BUG: unable to handle kernel NULL pointer dereference a 0000000000000228 [ 6.238756] IP: ib_dereg_mr+0xd/0x30 [ 6.239264] PGD 80000000167eb067 P4D 80000000167eb067 PUD 167f9067 PMD 0 [ 6.240320] Oops: 0000 [#1] SMP PTI [ 6.240782] CPU: 0 PID: 367 Comm: dereg Not tainted 4.16.0-rc1-00029-gc198fafe0453 #183 [ 6.242120] Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS rel-1.7.5-0-ge51488c-20140602_164612-nilsson.home.kraxel.org 04/01/2014 [ 6.244504] RIP: 0010:ib_dereg_mr+0xd/0x30 [ 6.245253] RSP: 0018:ffffaf5d001d7d68 EFLAGS: 00010246 [ 6.246100] RAX: 0000000000000000 RBX: ffff95d4172daf00 RCX: 0000000000000000 [ 6.247414] RDX: 00000000ffffffff RSI: 0000000000000001 RDI: ffff95d41a317600 [ 6.248591] RBP: 0000000000000001 R08: 0000000000000000 R09: 0000000000000000 [ 6.249810] R10: ffff95d417033c10 R11: 0000000000000000 R12: ffff95d4172c3a80 [ 6.251121] R13: ffff95d4172c3720 R14: ffff95d4172c3a98 R15: 00000000ffffffff [ 6.252437] FS: 0000000000000000(0000) GS:ffff95d41fc00000(0000) knlGS:0000000000000000 [ 6.253887] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [ 6.254814] CR2: 0000000000000228 CR3: 00000000172b4000 CR4: 00000000000006b0 [ 6.255943] Call Trace: [ 6.256368] remove_commit_idr_uobject+0x1b/0x80 [ 6.257118] uverbs_cleanup_ucontext+0xe4/0x190 [ 6.257855] ib_uverbs_cleanup_ucontext.constprop.14+0x19/0x40 [ 6.258857] ib_uverbs_close+0x2a/0x100 [ 6.259494] __fput+0xca/0x1c0 [ 6.259938] task_work_run+0x84/0xa0 [ 6.260519] do_exit+0x312/0xb40 [ 6.261023] ? __do_page_fault+0x24d/0x490 [ 6.261707] do_group_exit+0x3a/0xa0 [ 6.262267] SyS_exit_group+0x10/0x10 [ 6.262802] do_syscall_64+0x75/0x180 [ 6.263391] entry_SYSCALL_64_after_hwframe+0x21/0x86 [ 6.264253] RIP: 0033:0x7f1b39c49488 [ 6.264827] RSP: 002b:00007ffe2de05b68 EFLAGS: 00000246 ORIG_RAX: 00000000000000e7 [ 6.266049] RAX: ffffffffffffffda RBX: 0000000000000000 RCX: 00007f1b39c49488 [ 6.267187] RDX: 0000000000000000 RSI: 000000000000003c RDI: 0000000000000000 [ 6.268377] RBP: 00007f1b39f258e0 R08: 00000000000000e7 R09: ffffffffffffff98 [ 6.269640] R10: 00007f1b3a147260 R11: 0000000000000246 R12: 00007f1b39f258e0 [ 6.270783] R13: 00007f1b39f2ac20 R14: 0000000000000000 R15: 0000000000000000 [ 6.271943] Code: 74 07 31 d2 e9 25 d8 6c 00 b8 da ff ff ff c3 0f 1f 44 00 00 66 2e 0f 1f 84 00 00 00 00 00 0f 1f 44 00 00 48 8b 07 53 48 8b 5f 08 <48> 8b 80 28 02 00 00 e8 f7 d7 6c 00 85 c0 75 04 3e ff 4b 18 5b [ 6.274927] RIP: ib_dereg_mr+0xd/0x30 RSP: ffffaf5d001d7d68 [ 6.275760] CR2: 0000000000000228 [ 6.276200] ---[ end trace a35641f1c474bd20 ]--- Fixes: e126ba97dba9 ("mlx5: Add driver for Mellanox Connect-IB adapters") Cc: syzkaller <syzkaller(a)googlegroups.com> Cc: <stable(a)vger.kernel.org> Reported-by: Noa Osherovich <noaos(a)mellanox.com> Signed-off-by: Leon Romanovsky <leonro(a)mellanox.com> Signed-off-by: Doug Ledford <dledford(a)redhat.com> diff --git a/drivers/infiniband/hw/mlx5/mr.c b/drivers/infiniband/hw/mlx5/mr.c index 1961c6a45437..c51c602f06d6 100644 --- a/drivers/infiniband/hw/mlx5/mr.c +++ b/drivers/infiniband/hw/mlx5/mr.c @@ -838,7 +838,8 @@ static int mr_umem_get(struct ib_pd *pd, u64 start, u64 length, *umem = ib_umem_get(pd->uobject->context, start, length, access_flags, 0); err = PTR_ERR_OR_ZERO(*umem); - if (err < 0) { + if (err) { + *umem = NULL; mlx5_ib_err(dev, "umem get failed (%d)\n", err); return err; } @@ -1415,6 +1416,7 @@ int mlx5_ib_rereg_user_mr(struct ib_mr *ib_mr, int flags, u64 start, if (err) { mlx5_ib_warn(dev, "Failed to rereg UMR\n"); ib_umem_release(mr->umem); + mr->umem = NULL; clean_mr(dev, mr); return err; } @@ -1498,14 +1500,11 @@ static int clean_mr(struct mlx5_ib_dev *dev, struct mlx5_ib_mr *mr) u32 key = mr->mmkey.key; err = destroy_mkey(dev, mr); - kfree(mr); if (err) { mlx5_ib_warn(dev, "failed to destroy mkey 0x%x (%d)\n", key, err); return err; } - } else { - mlx5_mr_cache_free(dev, mr); } return 0; @@ -1548,6 +1547,11 @@ static int dereg_mr(struct mlx5_ib_dev *dev, struct mlx5_ib_mr *mr) atomic_sub(npages, &dev->mdev->priv.reg_pages); } + if (!mr->allocated_from_cache) + kfree(mr); + else + mlx5_mr_cache_free(dev, mr); + return 0; }

7 years, 5 months

1
0
0 0

FAILED: patch "[PATCH] clk: bcm2835: Fix ana->maskX definitions" failed to apply to 4.4-stable tree

by gregkh＠linuxfoundation.org

The patch below does not apply to the 4.4-stable tree. If someone wants it applied there, or to any other stable or longterm tree, then please email the backport, including the original git commit id to <stable(a)vger.kernel.org>. thanks, greg k-h ------------------ original commit in Linus's tree ------------------ >From 49012d1bf5f78782d398adb984a080a88ba42965 Mon Sep 17 00:00:00 2001 From: Boris Brezillon <boris.brezillon(a)bootlin.com> Date: Thu, 8 Feb 2018 14:43:35 +0100 Subject: [PATCH] clk: bcm2835: Fix ana->maskX definitions ana->maskX values are already '~'-ed in bcm2835_pll_set_rate(). Remove the '~' in the definition to fix ANA setup. Note that this commit fixes a long standing bug preventing one from using an HDMI display if it's plugged after the FW has booted Linux. This is because PLLH is used by the HDMI encoder to generate the pixel clock. Fixes: 41691b8862e2 ("clk: bcm2835: Add support for programming the audio domain clocks") Cc: <stable(a)vger.kernel.org> Signed-off-by: Boris Brezillon <boris.brezillon(a)bootlin.com> Reviewed-by: Eric Anholt <eric(a)anholt.net> Signed-off-by: Stephen Boyd <sboyd(a)kernel.org> diff --git a/drivers/clk/bcm/clk-bcm2835.c b/drivers/clk/bcm/clk-bcm2835.c index 44301a3d9963..2108a274185a 100644 --- a/drivers/clk/bcm/clk-bcm2835.c +++ b/drivers/clk/bcm/clk-bcm2835.c @@ -449,17 +449,17 @@ struct bcm2835_pll_ana_bits { static const struct bcm2835_pll_ana_bits bcm2835_ana_default = { .mask0 = 0, .set0 = 0, - .mask1 = (u32)~(A2W_PLL_KI_MASK | A2W_PLL_KP_MASK), + .mask1 = A2W_PLL_KI_MASK | A2W_PLL_KP_MASK, .set1 = (2 << A2W_PLL_KI_SHIFT) | (8 << A2W_PLL_KP_SHIFT), - .mask3 = (u32)~A2W_PLL_KA_MASK, + .mask3 = A2W_PLL_KA_MASK, .set3 = (2 << A2W_PLL_KA_SHIFT), .fb_prediv_mask = BIT(14), }; static const struct bcm2835_pll_ana_bits bcm2835_ana_pllh = { - .mask0 = (u32)~(A2W_PLLH_KA_MASK | A2W_PLLH_KI_LOW_MASK), + .mask0 = A2W_PLLH_KA_MASK | A2W_PLLH_KI_LOW_MASK, .set0 = (2 << A2W_PLLH_KA_SHIFT) | (2 << A2W_PLLH_KI_LOW_SHIFT), - .mask1 = (u32)~(A2W_PLLH_KI_HIGH_MASK | A2W_PLLH_KP_MASK), + .mask1 = A2W_PLLH_KI_HIGH_MASK | A2W_PLLH_KP_MASK, .set1 = (6 << A2W_PLLH_KP_SHIFT), .mask3 = 0, .set3 = 0,

7 years, 5 months

1
0
0 0

FAILED: patch "[PATCH] mmc: sdhci-acpi: Fix IRQ 0" failed to apply to 4.15-stable tree

by gregkh＠linuxfoundation.org

The patch below does not apply to the 4.15-stable tree. If someone wants it applied there, or to any other stable or longterm tree, then please email the backport, including the original git commit id to <stable(a)vger.kernel.org>. thanks, greg k-h ------------------ original commit in Linus's tree ------------------ >From d58ac803cfbb92ede501409dd6afe9abb111d4f1 Mon Sep 17 00:00:00 2001 From: Adrian Hunter <adrian.hunter(a)intel.com> Date: Wed, 21 Mar 2018 11:49:40 +0200 Subject: [PATCH] mmc: sdhci-acpi: Fix IRQ 0 Zero is a valid IRQ number and is being used on some CHT tablets. Stop treating it as an error. Reported-by: Luke Ross <luke(a)lukeross.name> Fixes: 1b7ba57ecc86 ("mmc: sdhci-acpi: Handle return value of platform_get_irq") Cc: Arvind Yadav <arvind.yadav.cs(a)gmail.com> Signed-off-by: Adrian Hunter <adrian.hunter(a)intel.com> Cc: stable(a)vger.kernel.org Signed-off-by: Ulf Hansson <ulf.hansson(a)linaro.org> diff --git a/drivers/mmc/host/sdhci-acpi.c b/drivers/mmc/host/sdhci-acpi.c index 4065da58789d..32321bd596d8 100644 --- a/drivers/mmc/host/sdhci-acpi.c +++ b/drivers/mmc/host/sdhci-acpi.c @@ -680,7 +680,7 @@ static int sdhci_acpi_probe(struct platform_device *pdev) host->hw_name = "ACPI"; host->ops = &sdhci_acpi_ops_dflt; host->irq = platform_get_irq(pdev, 0); - if (host->irq <= 0) { + if (host->irq < 0) { err = -EINVAL; goto err_free; }

7 years, 5 months

1
0
0 0

FAILED: patch "[PATCH] mmc: core: Disable HPI for certain Micron (Numonyx) eMMC" failed to apply to 4.9-stable tree

by gregkh＠linuxfoundation.org

The patch below does not apply to the 4.9-stable tree. If someone wants it applied there, or to any other stable or longterm tree, then please email the backport, including the original git commit id to <stable(a)vger.kernel.org>. thanks, greg k-h ------------------ original commit in Linus's tree ------------------ >From dbe7dc6b9b28f5b012b0bedc372aa0c52521f3e4 Mon Sep 17 00:00:00 2001 From: Dirk Behme <dirk.behme(a)de.bosch.com> Date: Wed, 14 Mar 2018 14:50:09 +0000 Subject: [PATCH] mmc: core: Disable HPI for certain Micron (Numonyx) eMMC cards Certain Micron eMMC v4.5 cards might get broken when HPI feature is used and hence this patch disables the HPI feature for such buggy cards. In U-Boot, these cards are reported as Manufacturer: Micron (ID: 0xFE) OEM: 0x4E Name: MMC32G Revision: 19 (0x13) Serial: 959241022 Manufact. date: 8/2015 (0x82) CRC: 0x00 Tran Speed: 52000000 Rd Block Len: 512 MMC version 4.5 High Capacity: Yes Capacity: 29.1 GiB Boot Partition Size: 16 MiB Bus Width: 8-bit According to JEDEC JEP106 manufacturer 0xFE is Numonyx, which was bought by Micron. Signed-off-by: Dirk Behme <dirk.behme(a)de.bosch.com> Signed-off-by: Mark Craske <Mark_Craske(a)mentor.com> Cc: <stable(a)vger.kernel.org> # 4.8+ Signed-off-by: Ulf Hansson <ulf.hansson(a)linaro.org> diff --git a/drivers/mmc/core/card.h b/drivers/mmc/core/card.h index 79a5b985ccf5..9c821eedd156 100644 --- a/drivers/mmc/core/card.h +++ b/drivers/mmc/core/card.h @@ -82,6 +82,7 @@ struct mmc_fixup { #define CID_MANFID_APACER 0x27 #define CID_MANFID_KINGSTON 0x70 #define CID_MANFID_HYNIX 0x90 +#define CID_MANFID_NUMONYX 0xFE #define END_FIXUP { NULL } diff --git a/drivers/mmc/core/quirks.h b/drivers/mmc/core/quirks.h index 75d317623852..5153577754f0 100644 --- a/drivers/mmc/core/quirks.h +++ b/drivers/mmc/core/quirks.h @@ -109,6 +109,12 @@ static const struct mmc_fixup mmc_ext_csd_fixups[] = { */ MMC_FIXUP_EXT_CSD_REV(CID_NAME_ANY, CID_MANFID_HYNIX, 0x014a, add_quirk, MMC_QUIRK_BROKEN_HPI, 5), + /* + * Certain Micron (Numonyx) eMMC 4.5 cards might get broken when HPI + * feature is used so disable the HPI feature for such buggy cards. + */ + MMC_FIXUP_EXT_CSD_REV(CID_NAME_ANY, CID_MANFID_NUMONYX, + 0x014e, add_quirk, MMC_QUIRK_BROKEN_HPI, 6), END_FIXUP };

7 years, 5 months

1
0
0 0

2025

2024

2023

2022

2021

2020

2019

2018

2017

Linux-stable-mirror