- Linux-stable-mirror - lists.linaro.org

Re: [PATCH net] arp: fix arp_filter on l3slave devices

by Sasha Levin

Hi, [This is an automated email] This commit has been processed by the -stable helper bot and determined to be a high probability candidate for -stable trees. (score: 33.5930) The bot has tested the following trees: v4.16, v4.15.15, v4.14.32, v4.9.92, v4.4.126. v4.16: Build OK! v4.15.15: Build OK! v4.14.32: Build OK! v4.9.92: Build OK! v4.4.126: Build OK! Please let us know if you'd like to have this patch included in a stable tree. -- Thanks, Sasha

7 years, 5 months

2
1
0 0

Re: [PATCH AUTOSEL for 4.15 142/189] firmware: dmi_scan: Fix handling of empty DMI strings

by Jean Delvare

Hi Parag, On Sun, 8 Apr 2018 21:21:19 -0400, Parag Warudkar wrote: > On Sun, Apr 8, 2018 at 8:18 PM, Sasha Levin <Alexander.Levin(a)microsoft.com> > wrote: > > > From: Jean Delvare <jdelvare(a)suse.de> > > > > [ Upstream commit a7770ae194569e96a93c48aceb304edded9cc648 ] > > > > [snip] > > > > > > * Strings starting with 8 spaces are all considered empty, even if > > non-space characters follow (sounds like a weird thing to do, but > > I have actually seen occurrences of this in DMI tables before.) > > > > Unless I am misreading the patch we will now allocate memory for > len(spaces)+len(string) for this case. Correct. > Have you seen BIOSes with lots of <space>string occurrences? A fair number, yes, but most of them were thankfully not in strings we are saving. Also note that most of them only have 1 or 2 leading spaces, not 8+, so this commit makes no difference for them. > If so what's the point of allocating memory for the leading spaces? Presented like that, it sounds like we are silly. But look at things the other way around: what's the point of storing these leading spaces in the DMI table in the first place? Whenever this happens, the hardware manufacturer is to blame, not us. As much as possible, we should stick to the specification and assume the other party does as well. Stripping the leading spaces would be trivial, but hiding their mistakes does not help hardware manufacturers in the long run anyway. If they can't see that it's wrong, it's harder for them to fix it. > IOW, what happens if we strip leading space before allocating? At boot time, we save a few bytes of memory, on the affected systems only. No code cost, but possibly some confusion as to why we strip leading spaces (which are rare) but not trailing spaces (which in my experience are more frequent.) At run time, the exact matching of the affected DMI strings would be less error-prone (although strings having leading spaces are likely to also have trailing spaces, annihilating the benefits.) Non-exact matching would be marginally faster, again only for the affected systems. As a conclusion, it's doable, but the benefit is very small and limited to a few broken systems, and it has the downside of not discouraging low-quality tables, so my position is that it's not worth it and not desirable. -- Jean Delvare SUSE L3 Support

7 years, 5 months

2
1
0 0

Patch "x86/gart: Exclude GART aperture from vmcore" has been added to the 4.14-stable tree

by gregkh＠linuxfoundation.org

This is a note to let you know that I've just added the patch titled x86/gart: Exclude GART aperture from vmcore to the 4.14-stable tree which can be found at: http://www.kernel.org/git/?p=linux/kernel/git/stable/stable-queue.git;a=sum… The filename of the patch is: x86-gart-exclude-gart-aperture-from-vmcore.patch and it can be found in the queue-4.14 subdirectory. If you, or anyone else, feels it should not be added to the stable tree, please let <stable(a)vger.kernel.org> know about it. >From foo@baz Mon Apr 9 13:58:16 CEST 2018 From: Jiri Bohac <jbohac(a)suse.cz> Date: Sat, 6 Jan 2018 02:00:13 +0100 Subject: x86/gart: Exclude GART aperture from vmcore From: Jiri Bohac <jbohac(a)suse.cz> [ Upstream commit 2a3e83c6f96c513f43ce5a8c9034608ea584a255 ] On machines where the GART aperture is mapped over physical RAM /proc/vmcore contains the remapped range and reading it may cause hangs or reboots. In the past, the GART region was added into the resource map, implemented by commit 56dd669a138c ("[PATCH] Insert GART region into resource map") However, inserting the iomem_resource from the early GART code caused resource conflicts with some AGP drivers (bko#72201), which got avoided by reverting the patch in commit 707d4eefbdb3 ("Revert [PATCH] Insert GART region into resource map"). This revert introduced the /proc/vmcore bug. The vmcore ELF header is either prepared by the kernel (when using the kexec_file_load syscall) or by the kexec userspace (when using the kexec_load syscall). Since we no longer have the GART iomem resource, the userspace kexec has no way of knowing which region to exclude from the ELF header. Changes from v1 of this patch: Instead of excluding the aperture from the ELF header, this patch makes /proc/vmcore return zeroes in the second kernel when attempting to read the aperture region. This is done by reusing the gart_oldmem_pfn_is_ram infrastructure originally intended to exclude XEN balooned memory. This works for both, the kexec_file_load and kexec_load syscalls. [Note that the GART region is the same in the first and second kernels: regardless whether the first kernel fixed up the northbridge/bios setting and mapped the aperture over physical memory, the second kernel finds the northbridge properly configured by the first kernel and the aperture never overlaps with e820 memory because the second kernel has a fake e820 map created from the crashkernel memory regions. Thus, the second kernel keeps the aperture address/size as configured by the first kernel.] register_oldmem_pfn_is_ram can only register one callback and returns an error if the callback has been registered already. Since XEN used to be the only user of this function, it never checks the return value. Now that we have more than one user, I added a WARN_ON just in case agp, XEN, or any other future user of register_oldmem_pfn_is_ram were to step on each other's toes. Fixes: 707d4eefbdb3 ("Revert [PATCH] Insert GART region into resource map") Signed-off-by: Jiri Bohac <jbohac(a)suse.cz> Signed-off-by: Thomas Gleixner <tglx(a)linutronix.de> Cc: Baoquan He <bhe(a)redhat.com> Cc: Toshi Kani <toshi.kani(a)hpe.com> Cc: David Airlie <airlied(a)linux.ie> Cc: yinghai(a)kernel.org Cc: joro(a)8bytes.org Cc: kexec(a)lists.infradead.org Cc: Borislav Petkov <bp(a)alien8.de> Cc: Bjorn Helgaas <bhelgaas(a)google.com> Cc: Dave Young <dyoung(a)redhat.com> Cc: Vivek Goyal <vgoyal(a)redhat.com> Link: https://lkml.kernel.org/r/20180106010013.73suskgxm7lox7g6@dwarf.suse.cz Signed-off-by: Sasha Levin <alexander.levin(a)microsoft.com> Signed-off-by: Greg Kroah-Hartman <gregkh(a)linuxfoundation.org> --- arch/x86/kernel/aperture_64.c | 46 +++++++++++++++++++++++++++++++++++++++++- arch/x86/xen/mmu_hvm.c | 2 - 2 files changed, 46 insertions(+), 2 deletions(-) --- a/arch/x86/kernel/aperture_64.c +++ b/arch/x86/kernel/aperture_64.c @@ -30,6 +30,7 @@ #include <asm/dma.h> #include <asm/amd_nb.h> #include <asm/x86_init.h> +#include <linux/crash_dump.h> /* * Using 512M as goal, in case kexec will load kernel_big @@ -56,6 +57,33 @@ int fallback_aper_force __initdata; int fix_aperture __initdata = 1; +#ifdef CONFIG_PROC_VMCORE +/* + * If the first kernel maps the aperture over e820 RAM, the kdump kernel will + * use the same range because it will remain configured in the northbridge. + * Trying to dump this area via /proc/vmcore may crash the machine, so exclude + * it from vmcore. + */ +static unsigned long aperture_pfn_start, aperture_page_count; + +static int gart_oldmem_pfn_is_ram(unsigned long pfn) +{ + return likely((pfn < aperture_pfn_start) || + (pfn >= aperture_pfn_start + aperture_page_count)); +} + +static void exclude_from_vmcore(u64 aper_base, u32 aper_order) +{ + aperture_pfn_start = aper_base >> PAGE_SHIFT; + aperture_page_count = (32 * 1024 * 1024) << aper_order >> PAGE_SHIFT; + WARN_ON(register_oldmem_pfn_is_ram(&gart_oldmem_pfn_is_ram)); +} +#else +static void exclude_from_vmcore(u64 aper_base, u32 aper_order) +{ +} +#endif + /* This code runs before the PCI subsystem is initialized, so just access the northbridge directly. */ @@ -435,8 +463,16 @@ int __init gart_iommu_hole_init(void) out: if (!fix && !fallback_aper_force) { - if (last_aper_base) + if (last_aper_base) { + /* + * If this is the kdump kernel, the first kernel + * may have allocated the range over its e820 RAM + * and fixed up the northbridge + */ + exclude_from_vmcore(last_aper_base, last_aper_order); + return 1; + } return 0; } @@ -473,6 +509,14 @@ out: return 0; } + /* + * If this is the kdump kernel _and_ the first kernel did not + * configure the aperture in the northbridge, this range may + * overlap with the first kernel's memory. We can't access the + * range through vmcore even though it should be part of the dump. + */ + exclude_from_vmcore(aper_alloc, aper_order); + /* Fix up the north bridges */ for (i = 0; i < amd_nb_bus_dev_ranges[i].dev_limit; i++) { int bus, dev_base, dev_limit; --- a/arch/x86/xen/mmu_hvm.c +++ b/arch/x86/xen/mmu_hvm.c @@ -75,6 +75,6 @@ void __init xen_hvm_init_mmu_ops(void) if (is_pagetable_dying_supported()) pv_mmu_ops.exit_mmap = xen_hvm_exit_mmap; #ifdef CONFIG_PROC_VMCORE - register_oldmem_pfn_is_ram(&xen_oldmem_pfn_is_ram); + WARN_ON(register_oldmem_pfn_is_ram(&xen_oldmem_pfn_is_ram)); #endif } Patches currently in stable-queue which might be from jbohac(a)suse.cz are queue-4.14/x86-gart-exclude-gart-aperture-from-vmcore.patch

7 years, 5 months

1
0
0 0

Patch "wl1251: check return from call to wl1251_acx_arp_ip_filter" has been added to the 4.14-stable tree

by gregkh＠linuxfoundation.org

This is a note to let you know that I've just added the patch titled wl1251: check return from call to wl1251_acx_arp_ip_filter to the 4.14-stable tree which can be found at: http://www.kernel.org/git/?p=linux/kernel/git/stable/stable-queue.git;a=sum… The filename of the patch is: wl1251-check-return-from-call-to-wl1251_acx_arp_ip_filter.patch and it can be found in the queue-4.14 subdirectory. If you, or anyone else, feels it should not be added to the stable tree, please let <stable(a)vger.kernel.org> know about it. >From foo@baz Mon Apr 9 13:58:16 CEST 2018 From: Colin Ian King <colin.king(a)canonical.com> Date: Tue, 26 Dec 2017 17:33:18 +0000 Subject: wl1251: check return from call to wl1251_acx_arp_ip_filter From: Colin Ian King <colin.king(a)canonical.com> [ Upstream commit ac1181c60822292176ab96912208ec9f9819faf8 ] Currently the less than zero error check on ret is incorrect as it is checking a far earlier ret assignment rather than the return from the call to wl1251_acx_arp_ip_filter. Fix this by adding in the missing assginment. Detected by CoverityScan, CID#1164835 ("Logically dead code") Fixes: 204cc5c44fb6 ("wl1251: implement hardware ARP filtering") Signed-off-by: Colin Ian King <colin.king(a)canonical.com> Signed-off-by: Kalle Valo <kvalo(a)codeaurora.org> Signed-off-by: Sasha Levin <alexander.levin(a)microsoft.com> Signed-off-by: Greg Kroah-Hartman <gregkh(a)linuxfoundation.org> --- drivers/net/wireless/ti/wl1251/main.c | 3 +-- 1 file changed, 1 insertion(+), 2 deletions(-) --- a/drivers/net/wireless/ti/wl1251/main.c +++ b/drivers/net/wireless/ti/wl1251/main.c @@ -1200,8 +1200,7 @@ static void wl1251_op_bss_info_changed(s WARN_ON(wl->bss_type != BSS_TYPE_STA_BSS); enable = bss_conf->arp_addr_cnt == 1 && bss_conf->assoc; - wl1251_acx_arp_ip_filter(wl, enable, addr); - + ret = wl1251_acx_arp_ip_filter(wl, enable, addr); if (ret < 0) goto out_sleep; } Patches currently in stable-queue which might be from colin.king(a)canonical.com are queue-4.14/wl1251-check-return-from-call-to-wl1251_acx_arp_ip_filter.patch

7 years, 5 months

1
0
0 0

Patch "watchdog: dw_wdt: add stop watchdog operation" has been added to the 4.14-stable tree

by gregkh＠linuxfoundation.org

This is a note to let you know that I've just added the patch titled watchdog: dw_wdt: add stop watchdog operation to the 4.14-stable tree which can be found at: http://www.kernel.org/git/?p=linux/kernel/git/stable/stable-queue.git;a=sum… The filename of the patch is: watchdog-dw_wdt-add-stop-watchdog-operation.patch and it can be found in the queue-4.14 subdirectory. If you, or anyone else, feels it should not be added to the stable tree, please let <stable(a)vger.kernel.org> know about it. >From foo@baz Mon Apr 9 13:58:16 CEST 2018 From: Oleksij Rempel <o.rempel(a)pengutronix.de> Date: Tue, 26 Sep 2017 08:11:22 +0200 Subject: watchdog: dw_wdt: add stop watchdog operation From: Oleksij Rempel <o.rempel(a)pengutronix.de> [ Upstream commit 1bfe8889380890efe4943d125124f5a7b48571b0 ] The only way of stopping the watchdog is by resetting it. Add the watchdog op for stopping the device and reset if a reset line is provided. At same time WDOG_HW_RUNNING should be remove from dw_wdt_start. As commented by Guenter Roeck: dw_wdt sets WDOG_HW_RUNNING in its open function. Result is that the kref_get() in watchdog_open() won't be executed. But then kref_put() in close will be called since the watchdog now does stop. This causes the imbalance. Signed-off-by: Oleksij Rempel <o.rempel(a)pengutronix.de> Cc: Wim Van Sebroeck <wim(a)iguana.be> Cc: Guenter Roeck <linux(a)roeck-us.net> Cc: linux-watchdog(a)vger.kernel.org Reviewed-by: Guenter Roeck <linux(a)roeck-us.net> Signed-off-by: Guenter Roeck <linux(a)roeck-us.net> Signed-off-by: Wim Van Sebroeck <wim(a)iguana.be> Signed-off-by: Sasha Levin <alexander.levin(a)microsoft.com> Signed-off-by: Greg Kroah-Hartman <gregkh(a)linuxfoundation.org> --- drivers/watchdog/dw_wdt.c | 18 ++++++++++++++++-- 1 file changed, 16 insertions(+), 2 deletions(-) --- a/drivers/watchdog/dw_wdt.c +++ b/drivers/watchdog/dw_wdt.c @@ -127,14 +127,27 @@ static int dw_wdt_start(struct watchdog_ dw_wdt_set_timeout(wdd, wdd->timeout); - set_bit(WDOG_HW_RUNNING, &wdd->status); - writel(WDOG_CONTROL_REG_WDT_EN_MASK, dw_wdt->regs + WDOG_CONTROL_REG_OFFSET); return 0; } +static int dw_wdt_stop(struct watchdog_device *wdd) +{ + struct dw_wdt *dw_wdt = to_dw_wdt(wdd); + + if (!dw_wdt->rst) { + set_bit(WDOG_HW_RUNNING, &wdd->status); + return 0; + } + + reset_control_assert(dw_wdt->rst); + reset_control_deassert(dw_wdt->rst); + + return 0; +} + static int dw_wdt_restart(struct watchdog_device *wdd, unsigned long action, void *data) { @@ -173,6 +186,7 @@ static const struct watchdog_info dw_wdt static const struct watchdog_ops dw_wdt_ops = { .owner = THIS_MODULE, .start = dw_wdt_start, + .stop = dw_wdt_stop, .ping = dw_wdt_ping, .set_timeout = dw_wdt_set_timeout, .get_timeleft = dw_wdt_get_timeleft, Patches currently in stable-queue which might be from o.rempel(a)pengutronix.de are queue-4.14/watchdog-dw_wdt-add-stop-watchdog-operation.patch

7 years, 5 months

1
0
0 0

Patch "VFS: close race between getcwd() and d_move()" has been added to the 4.14-stable tree

by gregkh＠linuxfoundation.org

This is a note to let you know that I've just added the patch titled VFS: close race between getcwd() and d_move() to the 4.14-stable tree which can be found at: http://www.kernel.org/git/?p=linux/kernel/git/stable/stable-queue.git;a=sum… The filename of the patch is: vfs-close-race-between-getcwd-and-d_move.patch and it can be found in the queue-4.14 subdirectory. If you, or anyone else, feels it should not be added to the stable tree, please let <stable(a)vger.kernel.org> know about it. >From foo@baz Mon Apr 9 13:58:16 CEST 2018 From: NeilBrown <neilb(a)suse.com> Date: Fri, 10 Nov 2017 15:45:41 +1100 Subject: VFS: close race between getcwd() and d_move() From: NeilBrown <neilb(a)suse.com> [ Upstream commit 61647823aa920e395afcce4b57c32afb51456cab ] d_move() will call __d_drop() and then __d_rehash() on the dentry being moved. This creates a small window when the dentry appears to be unhashed. Many tests of d_unhashed() are made under ->d_lock and so are safe from racing with this window, but some aren't. In particular, getcwd() calls d_unlinked() (which calls d_unhashed()) without d_lock protection, so it can race. This races has been seen in practice with lustre, which uses d_move() as part of name lookup. See: https://jira.hpdd.intel.com/browse/LU-9735 It could race with a regular rename(), and result in ENOENT instead of either the 'before' or 'after' name. The race can be demonstrated with a simple program which has two threads, one renaming a directory back and forth while another calls getcwd() within that directory: it should never fail, but does. See: https://patchwork.kernel.org/patch/9455345/ We could fix this race by taking d_lock and rechecking when d_unhashed() reports true. Alternately when can remove the window, which is the approach this patch takes. ___d_drop() is introduce which does *not* clear d_hash.pprev so the dentry still appears to be hashed. __d_drop() calls ___d_drop(), then clears d_hash.pprev. __d_move() now uses ___d_drop() and only clears d_hash.pprev when not rehashing. Signed-off-by: NeilBrown <neilb(a)suse.com> Signed-off-by: Al Viro <viro(a)zeniv.linux.org.uk> Signed-off-by: Sasha Levin <alexander.levin(a)microsoft.com> Signed-off-by: Greg Kroah-Hartman <gregkh(a)linuxfoundation.org> --- fs/dcache.c | 23 ++++++++++++++++------- 1 file changed, 16 insertions(+), 7 deletions(-) --- a/fs/dcache.c +++ b/fs/dcache.c @@ -468,9 +468,11 @@ static void dentry_lru_add(struct dentry * d_drop() is used mainly for stuff that wants to invalidate a dentry for some * reason (NFS timeouts or autofs deletes). * - * __d_drop requires dentry->d_lock. + * __d_drop requires dentry->d_lock + * ___d_drop doesn't mark dentry as "unhashed" + * (dentry->d_hash.pprev will be LIST_POISON2, not NULL). */ -void __d_drop(struct dentry *dentry) +static void ___d_drop(struct dentry *dentry) { if (!d_unhashed(dentry)) { struct hlist_bl_head *b; @@ -486,12 +488,17 @@ void __d_drop(struct dentry *dentry) hlist_bl_lock(b); __hlist_bl_del(&dentry->d_hash); - dentry->d_hash.pprev = NULL; hlist_bl_unlock(b); /* After this call, in-progress rcu-walk path lookup will fail. */ write_seqcount_invalidate(&dentry->d_seq); } } + +void __d_drop(struct dentry *dentry) +{ + ___d_drop(dentry); + dentry->d_hash.pprev = NULL; +} EXPORT_SYMBOL(__d_drop); void d_drop(struct dentry *dentry) @@ -2386,7 +2393,7 @@ EXPORT_SYMBOL(d_delete); static void __d_rehash(struct dentry *entry) { struct hlist_bl_head *b = d_hash(entry->d_name.hash); - BUG_ON(!d_unhashed(entry)); + hlist_bl_lock(b); hlist_bl_add_head_rcu(&entry->d_hash, b); hlist_bl_unlock(b); @@ -2821,9 +2828,9 @@ static void __d_move(struct dentry *dent write_seqcount_begin_nested(&target->d_seq, DENTRY_D_LOCK_NESTED); /* unhash both */ - /* __d_drop does write_seqcount_barrier, but they're OK to nest. */ - __d_drop(dentry); - __d_drop(target); + /* ___d_drop does write_seqcount_barrier, but they're OK to nest. */ + ___d_drop(dentry); + ___d_drop(target); /* Switch the names.. */ if (exchange) @@ -2835,6 +2842,8 @@ static void __d_move(struct dentry *dent __d_rehash(dentry); if (exchange) __d_rehash(target); + else + target->d_hash.pprev = NULL; /* ... and switch them in the tree */ if (IS_ROOT(dentry)) { Patches currently in stable-queue which might be from neilb(a)suse.com are queue-4.14/staging-lustre-disable-preempt-while-sampling-processor-id.patch queue-4.14/vfs-close-race-between-getcwd-and-d_move.patch

7 years, 5 months

1
0
0 0

Patch "vfb: fix video mode and line_length being set when loaded" has been added to the 4.14-stable tree

by gregkh＠linuxfoundation.org

This is a note to let you know that I've just added the patch titled vfb: fix video mode and line_length being set when loaded to the 4.14-stable tree which can be found at: http://www.kernel.org/git/?p=linux/kernel/git/stable/stable-queue.git;a=sum… The filename of the patch is: vfb-fix-video-mode-and-line_length-being-set-when-loaded.patch and it can be found in the queue-4.14 subdirectory. If you, or anyone else, feels it should not be added to the stable tree, please let <stable(a)vger.kernel.org> know about it. >From foo@baz Mon Apr 9 13:58:16 CEST 2018 From: "Pieter \\\"PoroCYon\\\" Sluys" <pcy(a)national.shitposting.agency> Date: Thu, 4 Jan 2018 16:53:50 +0100 Subject: vfb: fix video mode and line_length being set when loaded From: "Pieter \\\"PoroCYon\\\" Sluys" <pcy(a)national.shitposting.agency> [ Upstream commit 7b9faf5df0ac495a1a3d7cdb64921c179f9008ac ] Currently, when loading the vfb module, the newly created fbdev has a line_length of 0, and its video mode would be PSEUDOCOLOR regardless of color depth. (The former could be worked around by calling the FBIOPUT_VSCREENINFO ioctl with having the FBACTIVIATE_FORCE flag set.) This patch automatically sets the line_length correctly, and the video mode is derived from the bit depth now as well. Thanks to Geert Uytterhoeven for confirming the bug and helping me with the patch. Output of `fbset -i' before the patch: mode "1366x768-60" # D: 72.432 MHz, H: 47.403 kHz, V: 60.004 Hz geometry 1366 768 1366 768 32 timings 13806 120 10 14 3 32 5 rgba 8/0,8/8,8/16,8/24 endmode Frame buffer device information: Name : Virtual FB Address : 0xffffaa1405d85000 Size : 4196352 Type : PACKED PIXELS Visual : PSEUDOCOLOR XPanStep : 1 YPanStep : 1 YWrapStep : 1 LineLength : 0 <-- note this Accelerator : No After: mode "1366x768-60" # D: 72.432 MHz, H: 47.403 kHz, V: 60.004 Hz geometry 1366 768 1366 768 32 timings 13806 120 10 14 3 32 5 rgba 8/0,8/8,8/16,8/24 endmode Frame buffer device information: Name : Virtual FB Address : 0xffffaa1405d85000 Size : 4196352 Type : PACKED PIXELS Visual : TRUECOLOR XPanStep : 1 YPanStep : 1 YWrapStep : 1 LineLength : 5464 Accelerator : No Signed-off-by: "Pieter \"PoroCYon\" Sluys" <pcy(a)national.shitposting.agency> Reviewed-by: Geert Uytterhoeven <geert(a)linux-m68k.org> [b.zolnierkie: minor fixups] Signed-off-by: Bartlomiej Zolnierkiewicz <b.zolnierkie(a)samsung.com> Signed-off-by: Sasha Levin <alexander.levin(a)microsoft.com> Signed-off-by: Greg Kroah-Hartman <gregkh(a)linuxfoundation.org> --- drivers/video/fbdev/vfb.c | 17 +++++++++++++++++ 1 file changed, 17 insertions(+) --- a/drivers/video/fbdev/vfb.c +++ b/drivers/video/fbdev/vfb.c @@ -239,8 +239,23 @@ static int vfb_check_var(struct fb_var_s */ static int vfb_set_par(struct fb_info *info) { + switch (info->var.bits_per_pixel) { + case 1: + info->fix.visual = FB_VISUAL_MONO01; + break; + case 8: + info->fix.visual = FB_VISUAL_PSEUDOCOLOR; + break; + case 16: + case 24: + case 32: + info->fix.visual = FB_VISUAL_TRUECOLOR; + break; + } + info->fix.line_length = get_line_length(info->var.xres_virtual, info->var.bits_per_pixel); + return 0; } @@ -450,6 +465,8 @@ static int vfb_probe(struct platform_dev goto err2; platform_set_drvdata(dev, info); + vfb_set_par(info); + fb_info(info, "Virtual frame buffer device, using %ldK of video memory\n", videomemorysize >> 10); return 0; Patches currently in stable-queue which might be from pcy(a)national.shitposting.agency are queue-4.14/vfb-fix-video-mode-and-line_length-being-set-when-loaded.patch

7 years, 5 months

1
0
0 0

Patch "tty: n_gsm: Allow ADM response in addition to UA for control dlci" has been added to the 4.14-stable tree

by gregkh＠linuxfoundation.org

This is a note to let you know that I've just added the patch titled tty: n_gsm: Allow ADM response in addition to UA for control dlci to the 4.14-stable tree which can be found at: http://www.kernel.org/git/?p=linux/kernel/git/stable/stable-queue.git;a=sum… The filename of the patch is: tty-n_gsm-allow-adm-response-in-addition-to-ua-for-control-dlci.patch and it can be found in the queue-4.14 subdirectory. If you, or anyone else, feels it should not be added to the stable tree, please let <stable(a)vger.kernel.org> know about it. >From foo@baz Mon Apr 9 13:58:16 CEST 2018 From: Tony Lindgren <tony(a)atomide.com> Date: Wed, 3 Jan 2018 10:18:03 -0800 Subject: tty: n_gsm: Allow ADM response in addition to UA for control dlci From: Tony Lindgren <tony(a)atomide.com> [ Upstream commit ea3d8465ab9b3e01be329ac5195970a84bef76c5 ] Some devices have the control dlci stay in ADM mode instead of the UA mode. This can seen at least on droid 4 when trying to open the ts 27.010 mux port. Enabling n_gsm debug mode shows the control dlci always respond with DM to SABM instead of UA: # modprobe n_gsm debug=0xff # ldattach -d GSM0710 /dev/ttyS0 & gsmld_output: 00000000: f9 03 3f 01 1c f9 --> 0) C: SABM(P) gsmld_receive: 00000000: f9 03 1f 01 36 f9 <-- 0) C: DM(P) ... $ minicom -D /dev/gsmtty1 minicom: cannot open /dev/gsmtty1: No error information $ strace minicom -D /dev/gsmtty1 ... open("/dev/gsmtty1", O_RDWR|O_NOCTTY|O_NONBLOCK|O_LARGEFILE) = -1 EL2HLT Note that this is different issue from other n_gsm -EL2HLT issues such as timeouts when the control dlci does not respond at all. The ADM mode seems to be a quite common according to "RF Wireless World" article "GSM Issue-UE sends SABM and gets a DM response instead of UA response": This issue is most commonly observed in GSM networks where in UE sends SABM and expects network to send UA response but it ends up receiving DM response from the network. SABM stands for Set asynchronous balanced mode, UA stands for Unnumbered Acknowledge and DA stands for Disconnected Mode. An RLP entity can be in one of two modes: - Asynchronous Balanced Mode (ABM) - Asynchronous Disconnected Mode (ADM) Currently Linux kernel closes the control dlci after several retries in gsm_dlci_t1() on DM. This causes n_gsm /dev/gsmtty ports to produce error code -EL2HLT when trying to open them as the closing of control dlci has already set gsm->dead. Let's fix the issue by allowing control dlci stay in ADM mode after the retries so the /dev/gsmtty ports can be opened and used. It seems that it might take several attempts to get any response from the control dlci, so it's best to allow ADM mode only after the SABM retries are done. Note that for droid 4 additional patches are needed to mux the ttyS0 pins and to toggle RTS gpio_149 to wake up the mdm6600 modem are also needed to use n_gsm. And the mdm6600 modem needs to be powered on. Cc: linux-serial(a)vger.kernel.org Cc: Alan Cox <alan(a)llwyncelyn.cymru> Cc: Jiri Prchal <jiri.prchal(a)aksignal.cz> Cc: Jiri Slaby <jslaby(a)suse.cz> Cc: Marcel Partap <mpartap(a)gmx.net> Cc: Michael Scott <michael.scott(a)linaro.org> Cc: Peter Hurley <peter(a)hurleysoftware.com> Cc: Russ Gorby <russ.gorby(a)intel.com> Cc: Sascha Hauer <s.hauer(a)pengutronix.de> Cc: Sebastian Reichel <sre(a)kernel.org> Signed-off-by: Tony Lindgren <tony(a)atomide.com> Signed-off-by: Greg Kroah-Hartman <gregkh(a)linuxfoundation.org> Signed-off-by: Sasha Levin <alexander.levin(a)microsoft.com> Signed-off-by: Greg Kroah-Hartman <gregkh(a)linuxfoundation.org> --- drivers/tty/n_gsm.c | 17 ++++++++++++++--- 1 file changed, 14 insertions(+), 3 deletions(-) --- a/drivers/tty/n_gsm.c +++ b/drivers/tty/n_gsm.c @@ -1463,6 +1463,10 @@ static void gsm_dlci_open(struct gsm_dlc * in which case an opening port goes back to closed and a closing port * is simply put into closed state (any further frames from the other * end will get a DM response) + * + * Some control dlci can stay in ADM mode with other dlci working just + * fine. In that case we can just keep the control dlci open after the + * DLCI_OPENING retries time out. */ static void gsm_dlci_t1(unsigned long data) @@ -1476,8 +1480,15 @@ static void gsm_dlci_t1(unsigned long da if (dlci->retries) { gsm_command(dlci->gsm, dlci->addr, SABM|PF); mod_timer(&dlci->t1, jiffies + gsm->t1 * HZ / 100); - } else + } else if (!dlci->addr && gsm->control == (DM | PF)) { + if (debug & 8) + pr_info("DLCI %d opening in ADM mode.\n", + dlci->addr); + gsm_dlci_open(dlci); + } else { gsm_dlci_close(dlci); + } + break; case DLCI_CLOSING: dlci->retries--; @@ -1495,8 +1506,8 @@ static void gsm_dlci_t1(unsigned long da * @dlci: DLCI to open * * Commence opening a DLCI from the Linux side. We issue SABM messages - * to the modem which should then reply with a UA, at which point we - * will move into open state. Opening is done asynchronously with retry + * to the modem which should then reply with a UA or ADM, at which point + * we will move into open state. Opening is done asynchronously with retry * running off timers and the responses. */ Patches currently in stable-queue which might be from tony(a)atomide.com are queue-4.14/tty-n_gsm-allow-adm-response-in-addition-to-ua-for-control-dlci.patch

7 years, 5 months

1
0
0 0

Patch "uio_hv_generic: check that host supports monitor page" has been added to the 4.14-stable tree

by gregkh＠linuxfoundation.org

This is a note to let you know that I've just added the patch titled uio_hv_generic: check that host supports monitor page to the 4.14-stable tree which can be found at: http://www.kernel.org/git/?p=linux/kernel/git/stable/stable-queue.git;a=sum… The filename of the patch is: uio_hv_generic-check-that-host-supports-monitor-page.patch and it can be found in the queue-4.14 subdirectory. If you, or anyone else, feels it should not be added to the stable tree, please let <stable(a)vger.kernel.org> know about it. >From foo@baz Mon Apr 9 13:58:16 CEST 2018 From: Stephen Hemminger <stephen(a)networkplumber.org> Date: Tue, 9 Jan 2018 12:57:31 -0800 Subject: uio_hv_generic: check that host supports monitor page From: Stephen Hemminger <stephen(a)networkplumber.org> [ Upstream commit 06028d15177a1b406b7b075ea47c6a352732f23a ] In order for userspace application to signal host, it needs the host to support the monitor page property. Check for the flag and fail if this is not supported. Signed-off-by: Stephen Hemminger <sthemmin(a)microsoft.com> Signed-off-by: Greg Kroah-Hartman <gregkh(a)linuxfoundation.org> Signed-off-by: Sasha Levin <alexander.levin(a)microsoft.com> Signed-off-by: Greg Kroah-Hartman <gregkh(a)linuxfoundation.org> --- drivers/uio/uio_hv_generic.c | 7 +++++++ 1 file changed, 7 insertions(+) --- a/drivers/uio/uio_hv_generic.c +++ b/drivers/uio/uio_hv_generic.c @@ -124,6 +124,13 @@ hv_uio_probe(struct hv_device *dev, if (ret) goto fail; + /* Communicating with host has to be via shared memory not hypercall */ + if (!dev->channel->offermsg.monitor_allocated) { + dev_err(&dev->device, "vmbus channel requires hypercall\n"); + ret = -ENOTSUPP; + goto fail_close; + } + dev->channel->inbound.ring_buffer->interrupt_mask = 1; set_channel_read_mode(dev->channel, HV_CALL_DIRECT); Patches currently in stable-queue which might be from stephen(a)networkplumber.org are queue-4.14/uio_hv_generic-check-that-host-supports-monitor-page.patch

7 years, 5 months

1
0
0 0

Patch "tpm: return a TPM_RC_COMMAND_CODE response if command is not implemented" has been added to the 4.14-stable tree

by gregkh＠linuxfoundation.org

This is a note to let you know that I've just added the patch titled tpm: return a TPM_RC_COMMAND_CODE response if command is not implemented to the 4.14-stable tree which can be found at: http://www.kernel.org/git/?p=linux/kernel/git/stable/stable-queue.git;a=sum… The filename of the patch is: tpm-return-a-tpm_rc_command_code-response-if-command-is-not-implemented.patch and it can be found in the queue-4.14 subdirectory. If you, or anyone else, feels it should not be added to the stable tree, please let <stable(a)vger.kernel.org> know about it. >From foo@baz Mon Apr 9 13:58:16 CEST 2018 From: Javier Martinez Canillas <javierm(a)redhat.com> Date: Thu, 30 Nov 2017 08:39:07 +0100 Subject: tpm: return a TPM_RC_COMMAND_CODE response if command is not implemented From: Javier Martinez Canillas <javierm(a)redhat.com> [ Upstream commit 095531f891e627e408606f2da4008d3d53e6748a ] According to the TPM Library Specification, a TPM device must do a command header validation before processing and return a TPM_RC_COMMAND_CODE code if the command is not implemented. So user-space will expect to handle that response as an error. But if the in-kernel resource manager is used (/dev/tpmrm?), an -EINVAL errno code is returned instead if the command isn't implemented. This confuses userspace since it doesn't expect that error value. This also isn't consistent with the behavior when not using TPM spaces and accessing the TPM directly (/dev/tpm?). In this case, the command is sent to the TPM even when not implemented and the TPM responds with an error. Instead of returning an -EINVAL errno code when the tpm_validate_command() function fails, synthesize a TPM command response so user-space can get a TPM_RC_COMMAND_CODE as expected when a chip doesn't implement the command. The TPM only sets 12 of the 32 bits in the TPM_RC response, so the TSS and TAB specifications define that higher layers in the stack should use some of the unused 20 bits to specify from which level of the stack the error is coming from. Since the TPM_RC_COMMAND_CODE response code is sent by the kernel resource manager, set the error level to the TAB/RM layer so user-space is aware of this. Suggested-by: Jason Gunthorpe <jgg(a)ziepe.ca> Signed-off-by: Javier Martinez Canillas <javierm(a)redhat.com> Reviewed-by: William Roberts <william.c.roberts(a)intel.com> Reviewed-by: Philip Tricca <philip.b.tricca(a)intel.com> Reviewed-by: Jarkko Sakkinen <jarkko.sakkinen(a)linux.intel.com> Tested-by: Jarkko Sakkinen <jarkko.sakkinen(a)linux.intel.com> Signed-off-by: Jarkko Sakkinen <jarkko.sakkinen(a)linux.intel.com> Signed-off-by: Sasha Levin <alexander.levin(a)microsoft.com> Signed-off-by: Greg Kroah-Hartman <gregkh(a)linuxfoundation.org> --- drivers/char/tpm/tpm-interface.c | 28 ++++++++++++++++++++-------- drivers/char/tpm/tpm.h | 5 +++++ 2 files changed, 25 insertions(+), 8 deletions(-) --- a/drivers/char/tpm/tpm-interface.c +++ b/drivers/char/tpm/tpm-interface.c @@ -328,7 +328,7 @@ unsigned long tpm_calc_ordinal_duration( } EXPORT_SYMBOL_GPL(tpm_calc_ordinal_duration); -static bool tpm_validate_command(struct tpm_chip *chip, +static int tpm_validate_command(struct tpm_chip *chip, struct tpm_space *space, const u8 *cmd, size_t len) @@ -340,10 +340,10 @@ static bool tpm_validate_command(struct unsigned int nr_handles; if (len < TPM_HEADER_SIZE) - return false; + return -EINVAL; if (!space) - return true; + return 0; if (chip->flags & TPM_CHIP_FLAG_TPM2 && chip->nr_commands) { cc = be32_to_cpu(header->ordinal); @@ -352,7 +352,7 @@ static bool tpm_validate_command(struct if (i < 0) { dev_dbg(&chip->dev, "0x%04X is an invalid command\n", cc); - return false; + return -EOPNOTSUPP; } attrs = chip->cc_attrs_tbl[i]; @@ -362,11 +362,11 @@ static bool tpm_validate_command(struct goto err_len; } - return true; + return 0; err_len: dev_dbg(&chip->dev, "%s: insufficient command length %zu", __func__, len); - return false; + return -EINVAL; } /** @@ -391,8 +391,20 @@ ssize_t tpm_transmit(struct tpm_chip *ch unsigned long stop; bool need_locality; - if (!tpm_validate_command(chip, space, buf, bufsiz)) - return -EINVAL; + rc = tpm_validate_command(chip, space, buf, bufsiz); + if (rc == -EINVAL) + return rc; + /* + * If the command is not implemented by the TPM, synthesize a + * response with a TPM2_RC_COMMAND_CODE return for user-space. + */ + if (rc == -EOPNOTSUPP) { + header->length = cpu_to_be32(sizeof(*header)); + header->tag = cpu_to_be16(TPM2_ST_NO_SESSIONS); + header->return_code = cpu_to_be32(TPM2_RC_COMMAND_CODE | + TSS2_RESMGR_TPM_RC_LAYER); + return bufsiz; + } if (bufsiz > TPM_BUFSIZE) bufsiz = TPM_BUFSIZE; --- a/drivers/char/tpm/tpm.h +++ b/drivers/char/tpm/tpm.h @@ -93,12 +93,17 @@ enum tpm2_structures { TPM2_ST_SESSIONS = 0x8002, }; +/* Indicates from what layer of the software stack the error comes from */ +#define TSS2_RC_LAYER_SHIFT 16 +#define TSS2_RESMGR_TPM_RC_LAYER (11 << TSS2_RC_LAYER_SHIFT) + enum tpm2_return_codes { TPM2_RC_SUCCESS = 0x0000, TPM2_RC_HASH = 0x0083, /* RC_FMT1 */ TPM2_RC_HANDLE = 0x008B, TPM2_RC_INITIALIZE = 0x0100, /* RC_VER1 */ TPM2_RC_DISABLED = 0x0120, + TPM2_RC_COMMAND_CODE = 0x0143, TPM2_RC_TESTING = 0x090A, /* RC_WARN */ TPM2_RC_REFERENCE_H0 = 0x0910, }; Patches currently in stable-queue which might be from javierm(a)redhat.com are queue-4.14/tpm-return-a-tpm_rc_command_code-response-if-command-is-not-implemented.patch

7 years, 5 months

1
0
0 0

Patch "thermal: power_allocator: fix one race condition issue for thermal_instances list" has been added to the 4.14-stable tree

by gregkh＠linuxfoundation.org

This is a note to let you know that I've just added the patch titled thermal: power_allocator: fix one race condition issue for thermal_instances list to the 4.14-stable tree which can be found at: http://www.kernel.org/git/?p=linux/kernel/git/stable/stable-queue.git;a=sum… The filename of the patch is: thermal-power_allocator-fix-one-race-condition-issue-for-thermal_instances-list.patch and it can be found in the queue-4.14 subdirectory. If you, or anyone else, feels it should not be added to the stable tree, please let <stable(a)vger.kernel.org> know about it. >From foo@baz Mon Apr 9 13:58:16 CEST 2018 From: Yi Zeng <yizeng(a)asrmicro.com> Date: Tue, 26 Dec 2017 19:22:26 +0800 Subject: thermal: power_allocator: fix one race condition issue for thermal_instances list From: Yi Zeng <yizeng(a)asrmicro.com> [ Upstream commit a5de11d67dcd268b8d0beb73dc374de5e97f0caf ] When invoking allow_maximum_power and traverse tz->thermal_instances, we should grab thermal_zone_device->lock to avoid race condition. For example, during the system reboot, if the mali GPU device implements device shutdown callback and unregister GPU devfreq cooling device, the deleted list head may be accessed to cause panic, as the following log shows: [ 33.551070] c3 25 (kworker/3:0) Unable to handle kernel paging request at virtual address dead000000000070 [ 33.566708] c3 25 (kworker/3:0) pgd = ffffffc0ed290000 [ 33.572071] c3 25 (kworker/3:0) [dead000000000070] *pgd=00000001ed292003, *pud=00000001ed292003, *pmd=0000000000000000 [ 33.581515] c3 25 (kworker/3:0) Internal error: Oops: 96000004 [#1] PREEMPT SMP [ 33.599761] c3 25 (kworker/3:0) CPU: 3 PID: 25 Comm: kworker/3:0 Not tainted 4.4.35+ #912 [ 33.614137] c3 25 (kworker/3:0) Workqueue: events_freezable thermal_zone_device_check [ 33.620245] c3 25 (kworker/3:0) task: ffffffc0f32e4200 ti: ffffffc0f32f0000 task.ti: ffffffc0f32f0000 [ 33.629466] c3 25 (kworker/3:0) PC is at power_allocator_throttle+0x7c8/0x8a4 [ 33.636609] c3 25 (kworker/3:0) LR is at power_allocator_throttle+0x808/0x8a4 [ 33.643742] c3 25 (kworker/3:0) pc : [<ffffff8008683dd0>] lr : [<ffffff8008683e10>] pstate: 20000145 [ 33.652874] c3 25 (kworker/3:0) sp : ffffffc0f32f3bb0 [ 34.468519] c3 25 (kworker/3:0) Process kworker/3:0 (pid: 25, stack limit = 0xffffffc0f32f0020) [ 34.477220] c3 25 (kworker/3:0) Stack: (0xffffffc0f32f3bb0 to 0xffffffc0f32f4000) [ 34.819822] c3 25 (kworker/3:0) Call trace: [ 34.824021] c3 25 (kworker/3:0) Exception stack(0xffffffc0f32f39c0 to 0xffffffc0f32f3af0) [ 34.924993] c3 25 (kworker/3:0) [<ffffff8008683dd0>] power_allocator_throttle+0x7c8/0x8a4 [ 34.933184] c3 25 (kworker/3:0) [<ffffff80086807f4>] handle_thermal_trip.part.25+0x70/0x224 [ 34.941545] c3 25 (kworker/3:0) [<ffffff8008680a68>] thermal_zone_device_update+0xc0/0x20c [ 34.949818] c3 25 (kworker/3:0) [<ffffff8008680bd4>] thermal_zone_device_check+0x20/0x2c [ 34.957924] c3 25 (kworker/3:0) [<ffffff80080b93a4>] process_one_work+0x168/0x458 [ 34.965414] c3 25 (kworker/3:0) [<ffffff80080ba068>] worker_thread+0x13c/0x4b4 [ 34.972650] c3 25 (kworker/3:0) [<ffffff80080c0a4c>] kthread+0xe8/0xfc [ 34.979187] c3 25 (kworker/3:0) [<ffffff8008084e90>] ret_from_fork+0x10/0x40 [ 34.986244] c3 25 (kworker/3:0) Code: f9405e73 eb1302bf d102e273 54ffc460 (b9402a61) [ 34.994339] c3 25 (kworker/3:0) ---[ end trace 32057901e3b7e1db ]--- Signed-off-by: Yi Zeng <yizeng(a)asrmicro.com> Signed-off-by: Zhang Rui <rui.zhang(a)intel.com> Signed-off-by: Sasha Levin <alexander.levin(a)microsoft.com> Signed-off-by: Greg Kroah-Hartman <gregkh(a)linuxfoundation.org> --- drivers/thermal/power_allocator.c | 2 ++ 1 file changed, 2 insertions(+) --- a/drivers/thermal/power_allocator.c +++ b/drivers/thermal/power_allocator.c @@ -523,6 +523,7 @@ static void allow_maximum_power(struct t struct thermal_instance *instance; struct power_allocator_params *params = tz->governor_data; + mutex_lock(&tz->lock); list_for_each_entry(instance, &tz->thermal_instances, tz_node) { if ((instance->trip != params->trip_max_desired_temperature) || (!cdev_is_power_actor(instance->cdev))) @@ -534,6 +535,7 @@ static void allow_maximum_power(struct t mutex_unlock(&instance->cdev->lock); thermal_cdev_update(instance->cdev); } + mutex_unlock(&tz->lock); } /** Patches currently in stable-queue which might be from yizeng(a)asrmicro.com are queue-4.14/thermal-power_allocator-fix-one-race-condition-issue-for-thermal_instances-list.patch

7 years, 5 months

1
0
0 0

Patch "thermal: int3400_thermal: fix error handling in int3400_thermal_probe()" has been added to the 4.14-stable tree

by gregkh＠linuxfoundation.org

This is a note to let you know that I've just added the patch titled thermal: int3400_thermal: fix error handling in int3400_thermal_probe() to the 4.14-stable tree which can be found at: http://www.kernel.org/git/?p=linux/kernel/git/stable/stable-queue.git;a=sum… The filename of the patch is: thermal-int3400_thermal-fix-error-handling-in-int3400_thermal_probe.patch and it can be found in the queue-4.14 subdirectory. If you, or anyone else, feels it should not be added to the stable tree, please let <stable(a)vger.kernel.org> know about it. >From foo@baz Mon Apr 9 13:58:16 CEST 2018 From: Alexey Khoroshilov <khoroshilov(a)ispras.ru> Date: Sat, 30 Dec 2017 01:05:21 +0300 Subject: thermal: int3400_thermal: fix error handling in int3400_thermal_probe() From: Alexey Khoroshilov <khoroshilov(a)ispras.ru> [ Upstream commit 0be86969ae385c5c944286bd9f66068525de15ee ] There are resources that are not dealocated on failure path in int3400_thermal_probe(). Found by Linux Driver Verification project (linuxtesting.org). Signed-off-by: Alexey Khoroshilov <khoroshilov(a)ispras.ru> Signed-off-by: Zhang Rui <rui.zhang(a)intel.com> Signed-off-by: Sasha Levin <alexander.levin(a)microsoft.com> Signed-off-by: Greg Kroah-Hartman <gregkh(a)linuxfoundation.org> --- drivers/thermal/int340x_thermal/int3400_thermal.c | 10 +++++++--- 1 file changed, 7 insertions(+), 3 deletions(-) --- a/drivers/thermal/int340x_thermal/int3400_thermal.c +++ b/drivers/thermal/int340x_thermal/int3400_thermal.c @@ -319,17 +319,21 @@ static int int3400_thermal_probe(struct result = sysfs_create_group(&pdev->dev.kobj, &uuid_attribute_group); if (result) - goto free_zone; + goto free_rel_misc; result = acpi_install_notify_handler( priv->adev->handle, ACPI_DEVICE_NOTIFY, int3400_notify, (void *)priv); if (result) - goto free_zone; + goto free_sysfs; return 0; -free_zone: +free_sysfs: + sysfs_remove_group(&pdev->dev.kobj, &uuid_attribute_group); +free_rel_misc: + if (!priv->rel_misc_dev_res) + acpi_thermal_rel_misc_device_remove(priv->adev->handle); thermal_zone_device_unregister(priv->thermal); free_art_trt: kfree(priv->trts); Patches currently in stable-queue which might be from khoroshilov(a)ispras.ru are queue-4.14/thermal-int3400_thermal-fix-error-handling-in-int3400_thermal_probe.patch

7 years, 5 months

1
0
0 0

Patch "tcmu: release blocks for partially setup cmds" has been added to the 4.14-stable tree

by gregkh＠linuxfoundation.org

This is a note to let you know that I've just added the patch titled tcmu: release blocks for partially setup cmds to the 4.14-stable tree which can be found at: http://www.kernel.org/git/?p=linux/kernel/git/stable/stable-queue.git;a=sum… The filename of the patch is: tcmu-release-blocks-for-partially-setup-cmds.patch and it can be found in the queue-4.14 subdirectory. If you, or anyone else, feels it should not be added to the stable tree, please let <stable(a)vger.kernel.org> know about it. >From foo@baz Mon Apr 9 13:58:16 CEST 2018 From: Mike Christie <mchristi(a)redhat.com> Date: Tue, 28 Nov 2017 12:40:33 -0600 Subject: tcmu: release blocks for partially setup cmds From: Mike Christie <mchristi(a)redhat.com> [ Upstream commit 810b8153c4243d2012a6ec002ddd3bbc9a9ae8c2 ] If we cannot setup a cmd because we run out of ring space or global pages release the blocks before sleeping. This prevents a deadlock where dev0 has waiting_blocks set and needs N blocks, but dev1 to devX have each allocated N / X blocks and also hit the global block limit so they went to sleep. find_free_blocks is not able to take the sleeping dev's blocks becaause their waiting_blocks is set and even if it was not the block returned by find_last_bit could equal dbi_max. The latter will probably never happen because DATA_BLOCK_BITS is so high but in the next patches DATA_BLOCK_BITS and TCMU_GLOBAL_MAX_BLOCKS will be settable so it might be lower and could happen. Signed-off-by: Mike Christie <mchristi(a)redhat.com> Signed-off-by: Nicholas Bellinger <nab(a)linux-iscsi.org> Signed-off-by: Sasha Levin <alexander.levin(a)microsoft.com> Signed-off-by: Greg Kroah-Hartman <gregkh(a)linuxfoundation.org> --- drivers/target/target_core_user.c | 7 +++++++ 1 file changed, 7 insertions(+) --- a/drivers/target/target_core_user.c +++ b/drivers/target/target_core_user.c @@ -796,6 +796,13 @@ tcmu_queue_cmd_ring(struct tcmu_cmd *tcm int ret; DEFINE_WAIT(__wait); + /* + * Don't leave commands partially setup because the unmap + * thread might need the blocks to make forward progress. + */ + tcmu_cmd_free_data(tcmu_cmd, tcmu_cmd->dbi_cur); + tcmu_cmd_reset_dbi_cur(tcmu_cmd); + prepare_to_wait(&udev->wait_cmdr, &__wait, TASK_INTERRUPTIBLE); pr_debug("sleeping for ring space\n"); Patches currently in stable-queue which might be from mchristi(a)redhat.com are queue-4.14/tcmu-release-blocks-for-partially-setup-cmds.patch

7 years, 5 months

1
0
0 0

Patch "staging: lustre: disable preempt while sampling processor id." has been added to the 4.14-stable tree

by gregkh＠linuxfoundation.org

This is a note to let you know that I've just added the patch titled staging: lustre: disable preempt while sampling processor id. to the 4.14-stable tree which can be found at: http://www.kernel.org/git/?p=linux/kernel/git/stable/stable-queue.git;a=sum… The filename of the patch is: staging-lustre-disable-preempt-while-sampling-processor-id.patch and it can be found in the queue-4.14 subdirectory. If you, or anyone else, feels it should not be added to the stable tree, please let <stable(a)vger.kernel.org> know about it. >From foo@baz Mon Apr 9 13:58:16 CEST 2018 From: NeilBrown <neilb(a)suse.com> Date: Tue, 19 Dec 2017 10:01:47 +1100 Subject: staging: lustre: disable preempt while sampling processor id. From: NeilBrown <neilb(a)suse.com> [ Upstream commit dbeccabf5294e80f7cc9ee566746c42211bed736 ] Calling smp_processor_id() without disabling preemption triggers a warning (if CONFIG_DEBUG_PREEMPT). I think the result of cfs_cpt_current() is only used as a hint for load balancing, rather than as a precise and stable indicator of the current CPU. So it doesn't need to be called with preemption disabled. So disable preemption inside cfs_cpt_current() to silence the warning. Signed-off-by: NeilBrown <neilb(a)suse.com> Reviewed-by: Andreas Dilger <andreas.dilger(a)intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh(a)linuxfoundation.org> Signed-off-by: Sasha Levin <alexander.levin(a)microsoft.com> Signed-off-by: Greg Kroah-Hartman <gregkh(a)linuxfoundation.org> --- drivers/staging/lustre/lnet/libcfs/linux/linux-cpu.c | 13 +++++++------ 1 file changed, 7 insertions(+), 6 deletions(-) --- a/drivers/staging/lustre/lnet/libcfs/linux/linux-cpu.c +++ b/drivers/staging/lustre/lnet/libcfs/linux/linux-cpu.c @@ -528,19 +528,20 @@ EXPORT_SYMBOL(cfs_cpt_spread_node); int cfs_cpt_current(struct cfs_cpt_table *cptab, int remap) { - int cpu = smp_processor_id(); - int cpt = cptab->ctb_cpu2cpt[cpu]; + int cpu; + int cpt; - if (cpt < 0) { - if (!remap) - return cpt; + preempt_disable(); + cpu = smp_processor_id(); + cpt = cptab->ctb_cpu2cpt[cpu]; + if (cpt < 0 && remap) { /* don't return negative value for safety of upper layer, * instead we shadow the unknown cpu to a valid partition ID */ cpt = cpu % cptab->ctb_nparts; } - + preempt_enable(); return cpt; } EXPORT_SYMBOL(cfs_cpt_current); Patches currently in stable-queue which might be from neilb(a)suse.com are queue-4.14/staging-lustre-disable-preempt-while-sampling-processor-id.patch queue-4.14/vfs-close-race-between-getcwd-and-d_move.patch

7 years, 5 months

1
0
0 0

Patch "spi: sh-msiof: Fix timeout failures for TX-only DMA transfers" has been added to the 4.14-stable tree

by gregkh＠linuxfoundation.org

This is a note to let you know that I've just added the patch titled spi: sh-msiof: Fix timeout failures for TX-only DMA transfers to the 4.14-stable tree which can be found at: http://www.kernel.org/git/?p=linux/kernel/git/stable/stable-queue.git;a=sum… The filename of the patch is: spi-sh-msiof-fix-timeout-failures-for-tx-only-dma-transfers.patch and it can be found in the queue-4.14 subdirectory. If you, or anyone else, feels it should not be added to the stable tree, please let <stable(a)vger.kernel.org> know about it. >From foo@baz Mon Apr 9 13:58:16 CEST 2018 From: Geert Uytterhoeven <geert+renesas(a)glider.be> Date: Wed, 3 Jan 2018 18:11:14 +0100 Subject: spi: sh-msiof: Fix timeout failures for TX-only DMA transfers From: Geert Uytterhoeven <geert+renesas(a)glider.be> [ Upstream commit 89434c3c35081439627baa2225622d5bd12242fe ] When using RX (with or without TX), the DMA interrupt triggers completion when the RX FIFO has been emptied, i.e. after the full transfer has finished. However, when using TX without RX, the DMA interrupt triggers completion as soon as the DMA engine has filled the TX FIFO, i.e. before the full transfer has finished. Then sh_msiof_modify_ctr_wait() will spin until the transfer has really finished and the TFSE bit is cleared, for at most 1 ms. For slow speeds and/or large transfers, this may cause timeouts and transfer failures: spi_sh_msiof e6e10000.spi: failed to shut down hardware 74x164 spi2.0: SPI transfer failed: -110 spi_master spi2: failed to transfer one message from queue 74x164 spi2.0: Failed writing: -110 Fix this by waiting explicitly until the TX FIFO has been emptied. Based on a patch in the BSP by Hiromitsu Yamasaki. Signed-off-by: Geert Uytterhoeven <geert+renesas(a)glider.be> Signed-off-by: Mark Brown <broonie(a)kernel.org> Signed-off-by: Sasha Levin <alexander.levin(a)microsoft.com> Signed-off-by: Greg Kroah-Hartman <gregkh(a)linuxfoundation.org> --- drivers/spi/spi-sh-msiof.c | 12 +++++++++++- 1 file changed, 11 insertions(+), 1 deletion(-) --- a/drivers/spi/spi-sh-msiof.c +++ b/drivers/spi/spi-sh-msiof.c @@ -797,11 +797,21 @@ static int sh_msiof_dma_once(struct sh_m goto stop_dma; } - /* wait for tx fifo to be emptied / rx fifo to be filled */ + /* wait for tx/rx DMA completion */ ret = sh_msiof_wait_for_completion(p); if (ret) goto stop_reset; + if (!rx) { + reinit_completion(&p->done); + sh_msiof_write(p, IER, IER_TEOFE); + + /* wait for tx fifo to be emptied */ + ret = sh_msiof_wait_for_completion(p); + if (ret) + goto stop_reset; + } + /* clear status bits */ sh_msiof_reset_str(p); Patches currently in stable-queue which might be from geert+renesas(a)glider.be are queue-4.14/acpi-ec-fix-debugfs_create_-usage.patch queue-4.14/spi-sh-msiof-fix-timeout-failures-for-tx-only-dma-transfers.patch

7 years, 5 months

1
0
0 0

Patch "signal/powerpc: Document conflicts with SI_USER and SIGFPE and SIGTRAP" has been added to the 4.14-stable tree

by gregkh＠linuxfoundation.org

This is a note to let you know that I've just added the patch titled signal/powerpc: Document conflicts with SI_USER and SIGFPE and SIGTRAP to the 4.14-stable tree which can be found at: http://www.kernel.org/git/?p=linux/kernel/git/stable/stable-queue.git;a=sum… The filename of the patch is: signal-powerpc-document-conflicts-with-si_user-and-sigfpe-and-sigtrap.patch and it can be found in the queue-4.14 subdirectory. If you, or anyone else, feels it should not be added to the stable tree, please let <stable(a)vger.kernel.org> know about it. >From foo@baz Mon Apr 9 13:58:16 CEST 2018 From: "Eric W. Biederman" <ebiederm(a)xmission.com> Date: Sat, 19 Aug 2017 15:26:01 -0500 Subject: signal/powerpc: Document conflicts with SI_USER and SIGFPE and SIGTRAP From: "Eric W. Biederman" <ebiederm(a)xmission.com> [ Upstream commit cf4674c46c66e45f238f8f7e81af2a444b970c0a ] Setting si_code to 0 results in a userspace seeing an si_code of 0. This is the same si_code as SI_USER. Posix and common sense requires that SI_USER not be a signal specific si_code. As such this use of 0 for the si_code is a pretty horribly broken ABI. Further use of si_code == 0 guaranteed that copy_siginfo_to_user saw a value of __SI_KILL and now sees a value of SIL_KILL with the result that uid and pid fields are copied and which might copying the si_addr field by accident but certainly not by design. Making this a very flakey implementation. Utilizing FPE_FIXME and TRAP_FIXME, siginfo_layout() will now return SIL_FAULT and the appropriate fields will be reliably copied. Possible ABI fixes includee: - Send the signal without siginfo - Don't generate a signal - Possibly assign and use an appropriate si_code - Don't handle cases which can't happen Cc: Paul Mackerras <paulus(a)samba.org> Cc: Kumar Gala <kumar.gala(a)freescale.com> Cc: Michael Ellerman <mpe(a)ellerman.id.au> Cc: Benjamin Herrenschmidt <benh(a)kernel.crashing.org> Cc: linuxppc-dev(a)lists.ozlabs.org Ref: 9bad068c24d7 ("[PATCH] ppc32: support for e500 and 85xx") Ref: 0ed70f6105ef ("PPC32: Provide proper siginfo information on various exceptions.") History Tree: https://git.kernel.org/pub/scm/linux/kernel/git/tglx/history.git Signed-off-by: "Eric W. Biederman" <ebiederm(a)xmission.com> Signed-off-by: Sasha Levin <alexander.levin(a)microsoft.com> Signed-off-by: Greg Kroah-Hartman <gregkh(a)linuxfoundation.org> --- arch/powerpc/include/uapi/asm/siginfo.h | 15 +++++++++++++++ arch/powerpc/kernel/traps.c | 10 +++++----- 2 files changed, 20 insertions(+), 5 deletions(-) --- a/arch/powerpc/include/uapi/asm/siginfo.h +++ b/arch/powerpc/include/uapi/asm/siginfo.h @@ -18,4 +18,19 @@ #undef NSIGTRAP #define NSIGTRAP 4 +/* + * SIGFPE si_codes + */ +#ifdef __KERNEL__ +#define FPE_FIXME 0 /* Broken dup of SI_USER */ +#endif /* __KERNEL__ */ + +/* + * SIGTRAP si_codes + */ +#ifdef __KERNEL__ +#define TRAP_FIXME 0 /* Broken dup of SI_USER */ +#endif /* __KERNEL__ */ + + #endif /* _ASM_POWERPC_SIGINFO_H */ --- a/arch/powerpc/kernel/traps.c +++ b/arch/powerpc/kernel/traps.c @@ -720,7 +720,7 @@ void unknown_exception(struct pt_regs *r printk("Bad trap at PC: %lx, SR: %lx, vector=%lx\n", regs->nip, regs->msr, regs->trap); - _exception(SIGTRAP, regs, 0, 0); + _exception(SIGTRAP, regs, TRAP_FIXME, 0); exception_exit(prev_state); } @@ -742,7 +742,7 @@ bail: void RunModeException(struct pt_regs *regs) { - _exception(SIGTRAP, regs, 0, 0); + _exception(SIGTRAP, regs, TRAP_FIXME, 0); } void single_step_exception(struct pt_regs *regs) @@ -781,7 +781,7 @@ static void emulate_single_step(struct p static inline int __parse_fpscr(unsigned long fpscr) { - int ret = 0; + int ret = FPE_FIXME; /* Invalid operation */ if ((fpscr & FPSCR_VE) && (fpscr & FPSCR_VX)) @@ -1769,7 +1769,7 @@ void SPEFloatingPointException(struct pt extern int do_spe_mathemu(struct pt_regs *regs); unsigned long spefscr; int fpexc_mode; - int code = 0; + int code = FPE_FIXME; int err; flush_spe_to_thread(current); @@ -1838,7 +1838,7 @@ void SPEFloatingPointRoundException(stru printk(KERN_ERR "unrecognized spe instruction " "in %s at %lx\n", current->comm, regs->nip); } else { - _exception(SIGFPE, regs, 0, regs->nip); + _exception(SIGFPE, regs, FPE_FIXME, regs->nip); return; } } Patches currently in stable-queue which might be from ebiederm(a)xmission.com are queue-4.14/signal-metag-document-a-conflict-with-si_user-with-sigfpe.patch queue-4.14/signal-arm-document-conflicts-with-si_user-and-sigfpe.patch queue-4.14/signal-powerpc-document-conflicts-with-si_user-and-sigfpe-and-sigtrap.patch

7 years, 5 months

1
0
0 0

Patch "signal/metag: Document a conflict with SI_USER with SIGFPE" has been added to the 4.14-stable tree

by gregkh＠linuxfoundation.org

This is a note to let you know that I've just added the patch titled signal/metag: Document a conflict with SI_USER with SIGFPE to the 4.14-stable tree which can be found at: http://www.kernel.org/git/?p=linux/kernel/git/stable/stable-queue.git;a=sum… The filename of the patch is: signal-metag-document-a-conflict-with-si_user-with-sigfpe.patch and it can be found in the queue-4.14 subdirectory. If you, or anyone else, feels it should not be added to the stable tree, please let <stable(a)vger.kernel.org> know about it. >From foo@baz Mon Apr 9 13:58:16 CEST 2018 From: "Eric W. Biederman" <ebiederm(a)xmission.com> Date: Tue, 1 Aug 2017 10:37:40 -0500 Subject: signal/metag: Document a conflict with SI_USER with SIGFPE From: "Eric W. Biederman" <ebiederm(a)xmission.com> [ Upstream commit b80328be53c215346b153769267b38f531d89b4f ] Setting si_code to 0 results in a userspace seeing an si_code of 0. This is the same si_code as SI_USER. Posix and common sense requires that SI_USER not be a signal specific si_code. As such this use of 0 for the si_code is a pretty horribly broken ABI. Further use of si_code == 0 guaranteed that copy_siginfo_to_user saw a value of __SI_KILL and now sees a value of SIL_KILL with the result hat uid and pid fields are copied and which might copying the si_addr field by accident but certainly not by design. Making this a very flakey implementation. Utilizing FPE_FIXME siginfo_layout will now return SIL_FAULT and the appropriate fields will reliably be copied. Possible ABI fixes includee: - Send the signal without siginfo - Don't generate a signal - Possibly assign and use an appropriate si_code - Don't handle cases which can't happen Cc: James Hogan <james.hogan(a)imgtec.com> Cc: linux-metag(a)vger.kernel.org Ref: ac919f0883e5 ("metag: Traps") Signed-off-by: "Eric W. Biederman" <ebiederm(a)xmission.com> Signed-off-by: Sasha Levin <alexander.levin(a)microsoft.com> Signed-off-by: Greg Kroah-Hartman <gregkh(a)linuxfoundation.org> --- arch/metag/include/uapi/asm/siginfo.h | 7 +++++++ arch/metag/kernel/traps.c | 2 +- 2 files changed, 8 insertions(+), 1 deletion(-) --- a/arch/metag/include/uapi/asm/siginfo.h +++ b/arch/metag/include/uapi/asm/siginfo.h @@ -6,4 +6,11 @@ #include <asm-generic/siginfo.h> +/* + * SIGFPE si_codes + */ +#ifdef __KERNEL__ +#define FPE_FIXME 0 /* Broken dup of SI_USER */ +#endif /* __KERNEL__ */ + #endif --- a/arch/metag/kernel/traps.c +++ b/arch/metag/kernel/traps.c @@ -735,7 +735,7 @@ TBIRES fpe_handler(TBIRES State, int Sig else if (error_state & TXSTAT_FPE_INEXACT_BIT) info.si_code = FPE_FLTRES; else - info.si_code = 0; + info.si_code = FPE_FIXME; info.si_errno = 0; info.si_addr = (__force void __user *)regs->ctx.CurrPC; force_sig_info(SIGFPE, &info, current); Patches currently in stable-queue which might be from ebiederm(a)xmission.com are queue-4.14/signal-metag-document-a-conflict-with-si_user-with-sigfpe.patch queue-4.14/signal-arm-document-conflicts-with-si_user-and-sigfpe.patch queue-4.14/signal-powerpc-document-conflicts-with-si_user-and-sigfpe-and-sigtrap.patch

7 years, 5 months

1
0
0 0

Patch "sdhci: Advertise 2.0v supply on SDIO host controller" has been added to the 4.14-stable tree

by gregkh＠linuxfoundation.org

This is a note to let you know that I've just added the patch titled sdhci: Advertise 2.0v supply on SDIO host controller to the 4.14-stable tree which can be found at: http://www.kernel.org/git/?p=linux/kernel/git/stable/stable-queue.git;a=sum… The filename of the patch is: sdhci-advertise-2.0v-supply-on-sdio-host-controller.patch and it can be found in the queue-4.14 subdirectory. If you, or anyone else, feels it should not be added to the stable tree, please let <stable(a)vger.kernel.org> know about it. >From foo@baz Mon Apr 9 13:58:16 CEST 2018 From: Andy Shevchenko <andriy.shevchenko(a)linux.intel.com> Date: Thu, 11 Jan 2018 15:51:58 +0200 Subject: sdhci: Advertise 2.0v supply on SDIO host controller From: Andy Shevchenko <andriy.shevchenko(a)linux.intel.com> [ Upstream commit 2a609abe71ca59e4bd7139e161eaca2144ae6f2e ] On Intel Edison the Broadcom Wi-Fi card, which is connected to SDIO, requires 2.0v, while the host, according to Intel Merrifield TRM, supports 1.8v supply only. The card announces itself as mmc2: new ultra high speed DDR50 SDIO card at address 0001 Introduce a custom OCR mask for SDIO host controller on Intel Merrifield and add a special case to sdhci_set_power_noreg() to override 2.0v supply by enforcing 1.8v power choice. Signed-off-by: Andy Shevchenko <andriy.shevchenko(a)linux.intel.com> Acked-by: Adrian Hunter <adrian.hunter(a)intel.com> Signed-off-by: Ulf Hansson <ulf.hansson(a)linaro.org> Signed-off-by: Sasha Levin <alexander.levin(a)microsoft.com> Signed-off-by: Greg Kroah-Hartman <gregkh(a)linuxfoundation.org> --- drivers/mmc/host/sdhci-pci-core.c | 2 ++ drivers/mmc/host/sdhci.c | 7 +++++++ 2 files changed, 9 insertions(+) --- a/drivers/mmc/host/sdhci-pci-core.c +++ b/drivers/mmc/host/sdhci-pci-core.c @@ -806,6 +806,8 @@ static int intel_mrfld_mmc_probe_slot(st slot->host->quirks2 |= SDHCI_QUIRK2_NO_1_8_V; break; case INTEL_MRFLD_SDIO: + /* Advertise 2.0v for compatibility with the SDIO card's OCR */ + slot->host->ocr_mask = MMC_VDD_20_21 | MMC_VDD_165_195; slot->host->mmc->caps |= MMC_CAP_NONREMOVABLE | MMC_CAP_POWER_OFF_CARD; break; --- a/drivers/mmc/host/sdhci.c +++ b/drivers/mmc/host/sdhci.c @@ -1470,6 +1470,13 @@ void sdhci_set_power_noreg(struct sdhci_ if (mode != MMC_POWER_OFF) { switch (1 << vdd) { case MMC_VDD_165_195: + /* + * Without a regulator, SDHCI does not support 2.0v + * so we only get here if the driver deliberately + * added the 2.0v range to ocr_avail. Map it to 1.8v + * for the purpose of turning on the power. + */ + case MMC_VDD_20_21: pwr = SDHCI_POWER_180; break; case MMC_VDD_29_30: Patches currently in stable-queue which might be from andriy.shevchenko(a)linux.intel.com are queue-4.14/sdhci-advertise-2.0v-supply-on-sdio-host-controller.patch

7 years, 5 months

1
0
0 0

Patch "selftests/net: fix bugs in address and port initialization" has been added to the 4.14-stable tree

by gregkh＠linuxfoundation.org

This is a note to let you know that I've just added the patch titled selftests/net: fix bugs in address and port initialization to the 4.14-stable tree which can be found at: http://www.kernel.org/git/?p=linux/kernel/git/stable/stable-queue.git;a=sum… The filename of the patch is: selftests-net-fix-bugs-in-address-and-port-initialization.patch and it can be found in the queue-4.14 subdirectory. If you, or anyone else, feels it should not be added to the stable tree, please let <stable(a)vger.kernel.org> know about it. >From foo@baz Mon Apr 9 13:58:16 CEST 2018 From: Sowmini Varadhan <sowmini.varadhan(a)oracle.com> Date: Mon, 25 Dec 2017 14:43:04 -0800 Subject: selftests/net: fix bugs in address and port initialization From: Sowmini Varadhan <sowmini.varadhan(a)oracle.com> [ Upstream commit d36f45e5b46723cf2d4147173e18c52d4143176d ] Address/port initialization should work correctly regardless of the order in which command line arguments are supplied, E.g, cfg_port should be used to connect to the remote host even if it is processed after -D, src/dst address initialization should not require that [-4|-6] be specified before the -S or -D args, receiver should be able to bind to *.<cfg_port> Achieve this by making sure that the address/port structures are initialized after all command line options are parsed. Store cfg_port in host-byte order, and use htons() to set up the sin_port/sin6_port before bind/connect, so that the network system calls get the correct values in network-byte order. Signed-off-by: Sowmini Varadhan <sowmini.varadhan(a)oracle.com> Acked-by: Willem de Bruijn <willemb(a)google.com> Signed-off-by: David S. Miller <davem(a)davemloft.net> Signed-off-by: Sasha Levin <alexander.levin(a)microsoft.com> Signed-off-by: Greg Kroah-Hartman <gregkh(a)linuxfoundation.org> --- tools/testing/selftests/net/msg_zerocopy.c | 21 +++++++++++++++------ 1 file changed, 15 insertions(+), 6 deletions(-) --- a/tools/testing/selftests/net/msg_zerocopy.c +++ b/tools/testing/selftests/net/msg_zerocopy.c @@ -259,22 +259,28 @@ static int setup_ip6h(struct ipv6hdr *ip return sizeof(*ip6h); } -static void setup_sockaddr(int domain, const char *str_addr, void *sockaddr) + +static void setup_sockaddr(int domain, const char *str_addr, + struct sockaddr_storage *sockaddr) { struct sockaddr_in6 *addr6 = (void *) sockaddr; struct sockaddr_in *addr4 = (void *) sockaddr; switch (domain) { case PF_INET: + memset(addr4, 0, sizeof(*addr4)); addr4->sin_family = AF_INET; addr4->sin_port = htons(cfg_port); - if (inet_pton(AF_INET, str_addr, &(addr4->sin_addr)) != 1) + if (str_addr && + inet_pton(AF_INET, str_addr, &(addr4->sin_addr)) != 1) error(1, 0, "ipv4 parse error: %s", str_addr); break; case PF_INET6: + memset(addr6, 0, sizeof(*addr6)); addr6->sin6_family = AF_INET6; addr6->sin6_port = htons(cfg_port); - if (inet_pton(AF_INET6, str_addr, &(addr6->sin6_addr)) != 1) + if (str_addr && + inet_pton(AF_INET6, str_addr, &(addr6->sin6_addr)) != 1) error(1, 0, "ipv6 parse error: %s", str_addr); break; default: @@ -603,6 +609,7 @@ static void parse_opts(int argc, char ** sizeof(struct tcphdr) - 40 /* max tcp options */; int c; + char *daddr = NULL, *saddr = NULL; cfg_payload_len = max_payload_len; @@ -627,7 +634,7 @@ static void parse_opts(int argc, char ** cfg_cpu = strtol(optarg, NULL, 0); break; case 'D': - setup_sockaddr(cfg_family, optarg, &cfg_dst_addr); + daddr = optarg; break; case 'i': cfg_ifindex = if_nametoindex(optarg); @@ -638,7 +645,7 @@ static void parse_opts(int argc, char ** cfg_cork_mixed = true; break; case 'p': - cfg_port = htons(strtoul(optarg, NULL, 0)); + cfg_port = strtoul(optarg, NULL, 0); break; case 'r': cfg_rx = true; @@ -647,7 +654,7 @@ static void parse_opts(int argc, char ** cfg_payload_len = strtoul(optarg, NULL, 0); break; case 'S': - setup_sockaddr(cfg_family, optarg, &cfg_src_addr); + saddr = optarg; break; case 't': cfg_runtime_ms = 200 + strtoul(optarg, NULL, 10) * 1000; @@ -660,6 +667,8 @@ static void parse_opts(int argc, char ** break; } } + setup_sockaddr(cfg_family, daddr, &cfg_dst_addr); + setup_sockaddr(cfg_family, saddr, &cfg_src_addr); if (cfg_payload_len > max_payload_len) error(1, 0, "-s: payload exceeds max (%d)", max_payload_len); Patches currently in stable-queue which might be from sowmini.varadhan(a)oracle.com are queue-4.14/selftests-net-fix-bugs-in-address-and-port-initialization.patch queue-4.14/rds-reset-rs-rs_bound_addr-in-rds_add_bound-failure-path.patch

7 years, 5 months

1
0
0 0

Patch "scsi: mpt3sas: Proper handling of set/clear of "ATA command pending" flag." has been added to the 4.14-stable tree

by gregkh＠linuxfoundation.org

This is a note to let you know that I've just added the patch titled scsi: mpt3sas: Proper handling of set/clear of "ATA command pending" flag. to the 4.14-stable tree which can be found at: http://www.kernel.org/git/?p=linux/kernel/git/stable/stable-queue.git;a=sum… The filename of the patch is: scsi-mpt3sas-proper-handling-of-set-clear-of-ata-command-pending-flag.patch and it can be found in the queue-4.14 subdirectory. If you, or anyone else, feels it should not be added to the stable tree, please let <stable(a)vger.kernel.org> know about it. >From foo@baz Mon Apr 9 13:58:16 CEST 2018 From: Chaitra P B <chaitra.basappa(a)broadcom.com> Date: Wed, 27 Dec 2017 23:09:11 -0800 Subject: scsi: mpt3sas: Proper handling of set/clear of "ATA command pending" flag. From: Chaitra P B <chaitra.basappa(a)broadcom.com> [ Upstream commit f49d4aed1315a7b766d855f1367142e682b0cc87 ] 1. In IO path, setting of "ATA command pending" flag early before device removal, invalid device handle etc., checks causes any new commands to be always returned with SAM_STAT_BUSY and when the driver removes the drive the SML issues SYNC Cache command and that command is always returned with SAM_STAT_BUSY and thus making SYNC Cache command to requeued. 2. If the driver gets an ATA PT command for a SATA drive then the driver set "ATA command pending" flag in device specific data structure not to allow any further commands until the ATA PT command is completed. However, after setting the flag if the driver decides to return the command back to upper layers without actually issuing to the firmware (i.e., returns from qcmd failure return paths) then the corresponding flag is not cleared and this prevents the driver from sending any new commands to the drive. This patch fixes above two issues by setting of "ATA command pending" flag after checking for whether device deleted, invalid device handle, device busy with task management. And by setting "ATA command pending" flag to false in all of the qcmd failure return paths after setting the flag. Signed-off-by: Chaitra P B <chaitra.basappa(a)broadcom.com> Signed-off-by: Suganath Prabu S <suganath-prabu.subramani(a)broadcom.com> Signed-off-by: Martin K. Petersen <martin.petersen(a)oracle.com> Signed-off-by: Sasha Levin <alexander.levin(a)microsoft.com> Signed-off-by: Greg Kroah-Hartman <gregkh(a)linuxfoundation.org> --- drivers/scsi/mpt3sas/mpt3sas_scsih.c | 28 +++++++++++++++------------- 1 file changed, 15 insertions(+), 13 deletions(-) --- a/drivers/scsi/mpt3sas/mpt3sas_scsih.c +++ b/drivers/scsi/mpt3sas/mpt3sas_scsih.c @@ -4106,19 +4106,6 @@ scsih_qcmd(struct Scsi_Host *shost, stru return 0; } - /* - * Bug work around for firmware SATL handling. The loop - * is based on atomic operations and ensures consistency - * since we're lockless at this point - */ - do { - if (test_bit(0, &sas_device_priv_data->ata_command_pending)) { - scmd->result = SAM_STAT_BUSY; - scmd->scsi_done(scmd); - return 0; - } - } while (_scsih_set_satl_pending(scmd, true)); - sas_target_priv_data = sas_device_priv_data->sas_target; /* invalid device handle */ @@ -4144,6 +4131,19 @@ scsih_qcmd(struct Scsi_Host *shost, stru sas_device_priv_data->block) return SCSI_MLQUEUE_DEVICE_BUSY; + /* + * Bug work around for firmware SATL handling. The loop + * is based on atomic operations and ensures consistency + * since we're lockless at this point + */ + do { + if (test_bit(0, &sas_device_priv_data->ata_command_pending)) { + scmd->result = SAM_STAT_BUSY; + scmd->scsi_done(scmd); + return 0; + } + } while (_scsih_set_satl_pending(scmd, true)); + if (scmd->sc_data_direction == DMA_FROM_DEVICE) mpi_control = MPI2_SCSIIO_CONTROL_READ; else if (scmd->sc_data_direction == DMA_TO_DEVICE) @@ -4170,6 +4170,7 @@ scsih_qcmd(struct Scsi_Host *shost, stru if (!smid) { pr_err(MPT3SAS_FMT "%s: failed obtaining a smid\n", ioc->name, __func__); + _scsih_set_satl_pending(scmd, false); goto out; } mpi_request = mpt3sas_base_get_msg_frame(ioc, smid); @@ -4200,6 +4201,7 @@ scsih_qcmd(struct Scsi_Host *shost, stru if (mpi_request->DataLength) { if (ioc->build_sg_scmd(ioc, scmd, smid)) { mpt3sas_base_free_smid(ioc, smid); + _scsih_set_satl_pending(scmd, false); goto out; } } else Patches currently in stable-queue which might be from chaitra.basappa(a)broadcom.com are queue-4.14/scsi-mpt3sas-proper-handling-of-set-clear-of-ata-command-pending-flag.patch

7 years, 5 months

1
0
0 0

Patch "scsi: megaraid_sas: unload flag should be set after scsi_remove_host is called" has been added to the 4.14-stable tree

by gregkh＠linuxfoundation.org

This is a note to let you know that I've just added the patch titled scsi: megaraid_sas: unload flag should be set after scsi_remove_host is called to the 4.14-stable tree which can be found at: http://www.kernel.org/git/?p=linux/kernel/git/stable/stable-queue.git;a=sum… The filename of the patch is: scsi-megaraid_sas-unload-flag-should-be-set-after-scsi_remove_host-is-called.patch and it can be found in the queue-4.14 subdirectory. If you, or anyone else, feels it should not be added to the stable tree, please let <stable(a)vger.kernel.org> know about it. >From foo@baz Mon Apr 9 13:58:16 CEST 2018 From: Shivasharan S <shivasharan.srikanteshwara(a)broadcom.com> Date: Fri, 5 Jan 2018 05:27:41 -0800 Subject: scsi: megaraid_sas: unload flag should be set after scsi_remove_host is called From: Shivasharan S <shivasharan.srikanteshwara(a)broadcom.com> [ Upstream commit f3f7920b3910171b2999c7dc2335eb9f583e44f2 ] Issue - Driver returns DID_NO_CONNECT when unload is in progress, indicated using instance->unload flag. In case of dynamic unload of driver, this flag is set before calling scsi_remove_host(). While doing manual driver unload, user will see lots of prints for Sync Cache command with DID_NO_CONNECT status. Fix - Set the instance->unload flag after scsi_remove_host(). Allow device removal process to be completed and do not block any command before that. SCSI commands (like SYNC_CACHE) are received (as part of scsi_remove_host) by driver during unload will be submitted further down to the drives. Signed-off-by: Sumit Saxena <sumit.saxena(a)broadcom.com> Signed-off-by: Shivasharan S <shivasharan.srikanteshwara(a)broadcom.com> Signed-off-by: Martin K. Petersen <martin.petersen(a)oracle.com> Signed-off-by: Sasha Levin <alexander.levin(a)microsoft.com> Signed-off-by: Greg Kroah-Hartman <gregkh(a)linuxfoundation.org> --- drivers/scsi/megaraid/megaraid_sas_base.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) --- a/drivers/scsi/megaraid/megaraid_sas_base.c +++ b/drivers/scsi/megaraid/megaraid_sas_base.c @@ -6605,7 +6605,6 @@ static void megasas_detach_one(struct pc u32 pd_seq_map_sz; instance = pci_get_drvdata(pdev); - instance->unload = 1; host = instance->host; fusion = instance->ctrl_context; @@ -6616,6 +6615,7 @@ static void megasas_detach_one(struct pc if (instance->fw_crash_state != UNAVAILABLE) megasas_free_host_crash_buffer(instance); scsi_remove_host(instance->host); + instance->unload = 1; if (megasas_wait_for_adapter_operational(instance)) goto skip_firing_dcmds; Patches currently in stable-queue which might be from shivasharan.srikanteshwara(a)broadcom.com are queue-4.14/scsi-megaraid_sas-error-handling-for-invalid-ldcount-provided-by-firmware-in-raid-map.patch queue-4.14/scsi-megaraid_sas-unload-flag-should-be-set-after-scsi_remove_host-is-called.patch

7 years, 5 months

1
0
0 0

Patch "scsi: megaraid_sas: Error handling for invalid ldcount provided by firmware in RAID map" has been added to the 4.14-stable tree

by gregkh＠linuxfoundation.org

This is a note to let you know that I've just added the patch titled scsi: megaraid_sas: Error handling for invalid ldcount provided by firmware in RAID map to the 4.14-stable tree which can be found at: http://www.kernel.org/git/?p=linux/kernel/git/stable/stable-queue.git;a=sum… The filename of the patch is: scsi-megaraid_sas-error-handling-for-invalid-ldcount-provided-by-firmware-in-raid-map.patch and it can be found in the queue-4.14 subdirectory. If you, or anyone else, feels it should not be added to the stable tree, please let <stable(a)vger.kernel.org> know about it. >From foo@baz Mon Apr 9 13:58:16 CEST 2018 From: Shivasharan S <shivasharan.srikanteshwara(a)broadcom.com> Date: Fri, 5 Jan 2018 05:27:40 -0800 Subject: scsi: megaraid_sas: Error handling for invalid ldcount provided by firmware in RAID map From: Shivasharan S <shivasharan.srikanteshwara(a)broadcom.com> [ Upstream commit 7ada701d0d5e5c6d357e157a72b841db3e8d03f4 ] Currently driver does not validate ldcount provided by firmware. If the value is invalid, fail RAID map validation accordingly. This issue is rare to hit in field and is fixed as part of code review. Signed-off-by: Sumit Saxena <sumit.saxena(a)broadcom.com> Signed-off-by: Shivasharan S <shivasharan.srikanteshwara(a)broadcom.com> Signed-off-by: Martin K. Petersen <martin.petersen(a)oracle.com> Signed-off-by: Sasha Levin <alexander.levin(a)microsoft.com> Signed-off-by: Greg Kroah-Hartman <gregkh(a)linuxfoundation.org> --- drivers/scsi/megaraid/megaraid_sas_fp.c | 16 ++++++++++++---- 1 file changed, 12 insertions(+), 4 deletions(-) --- a/drivers/scsi/megaraid/megaraid_sas_fp.c +++ b/drivers/scsi/megaraid/megaraid_sas_fp.c @@ -168,7 +168,7 @@ static struct MR_LD_SPAN *MR_LdSpanPtrGe /* * This function will Populate Driver Map using firmware raid map */ -void MR_PopulateDrvRaidMap(struct megasas_instance *instance) +static int MR_PopulateDrvRaidMap(struct megasas_instance *instance) { struct fusion_context *fusion = instance->ctrl_context; struct MR_FW_RAID_MAP_ALL *fw_map_old = NULL; @@ -259,7 +259,7 @@ void MR_PopulateDrvRaidMap(struct megasa ld_count = (u16)le16_to_cpu(fw_map_ext->ldCount); if (ld_count > MAX_LOGICAL_DRIVES_EXT) { dev_dbg(&instance->pdev->dev, "megaraid_sas: LD count exposed in RAID map in not valid\n"); - return; + return 1; } pDrvRaidMap->ldCount = (__le16)cpu_to_le16(ld_count); @@ -285,6 +285,12 @@ void MR_PopulateDrvRaidMap(struct megasa fusion->ld_map[(instance->map_id & 1)]; pFwRaidMap = &fw_map_old->raidMap; ld_count = (u16)le32_to_cpu(pFwRaidMap->ldCount); + if (ld_count > MAX_LOGICAL_DRIVES) { + dev_dbg(&instance->pdev->dev, + "LD count exposed in RAID map in not valid\n"); + return 1; + } + pDrvRaidMap->totalSize = pFwRaidMap->totalSize; pDrvRaidMap->ldCount = (__le16)cpu_to_le16(ld_count); pDrvRaidMap->fpPdIoTimeoutSec = pFwRaidMap->fpPdIoTimeoutSec; @@ -300,6 +306,8 @@ void MR_PopulateDrvRaidMap(struct megasa sizeof(struct MR_DEV_HANDLE_INFO) * MAX_RAIDMAP_PHYSICAL_DEVICES); } + + return 0; } /* @@ -317,8 +325,8 @@ u8 MR_ValidateMapInfo(struct megasas_ins u16 ld; u32 expected_size; - - MR_PopulateDrvRaidMap(instance); + if (MR_PopulateDrvRaidMap(instance)) + return 0; fusion = instance->ctrl_context; drv_map = fusion->ld_drv_map[(instance->map_id & 1)]; Patches currently in stable-queue which might be from shivasharan.srikanteshwara(a)broadcom.com are queue-4.14/scsi-megaraid_sas-error-handling-for-invalid-ldcount-provided-by-firmware-in-raid-map.patch queue-4.14/scsi-megaraid_sas-unload-flag-should-be-set-after-scsi_remove_host-is-called.patch

7 years, 5 months

1
0
0 0

Patch "scsi: libsas: initialize sas_phy status according to response of DISCOVER" has been added to the 4.14-stable tree

by gregkh＠linuxfoundation.org

This is a note to let you know that I've just added the patch titled scsi: libsas: initialize sas_phy status according to response of DISCOVER to the 4.14-stable tree which can be found at: http://www.kernel.org/git/?p=linux/kernel/git/stable/stable-queue.git;a=sum… The filename of the patch is: scsi-libsas-initialize-sas_phy-status-according-to-response-of-discover.patch and it can be found in the queue-4.14 subdirectory. If you, or anyone else, feels it should not be added to the stable tree, please let <stable(a)vger.kernel.org> know about it. >From foo@baz Mon Apr 9 13:58:16 CEST 2018 From: chenxiang <chenxiang66(a)hisilicon.com> Date: Thu, 4 Jan 2018 21:04:33 +0800 Subject: scsi: libsas: initialize sas_phy status according to response of DISCOVER From: chenxiang <chenxiang66(a)hisilicon.com> [ Upstream commit affc67788fe5dfffad5cda3d461db5cf2b2ff2b0 ] The status of SAS PHY is in sas_phy->enabled. There is an issue that the status of a remote SAS PHY may be initialized incorrectly: if disable remote SAS PHY through sysfs interface (such as echo 0 > /sys/class/sas_phy/phy-1:0:0/enable), then reboot the system, and we will find the status of remote SAS PHY which is disabled before is 1 (cat /sys/class/sas_phy/phy-1:0:0/enable). But actually the status of remote SAS PHY is disabled and the device attached is not found. In SAS protocol, NEGOTIATED LOGICAL LINK RATE field of DISCOVER response is 0x1 when remote SAS PHY is disabled. So initialize sas_phy->enabled according to the value of NEGOTIATED LOGICAL LINK RATE field. Signed-off-by: chenxiang <chenxiang66(a)hisilicon.com> Reviewed-by: John Garry <john.garry(a)huawei.com> Signed-off-by: Jason Yan <yanaijie(a)huawei.com> Reviewed-by: Christoph Hellwig <hch(a)lst.de> Reviewed-by: Hannes Reinecke <hare(a)suse.com> Signed-off-by: Martin K. Petersen <martin.petersen(a)oracle.com> Signed-off-by: Sasha Levin <alexander.levin(a)microsoft.com> Signed-off-by: Greg Kroah-Hartman <gregkh(a)linuxfoundation.org> --- drivers/scsi/libsas/sas_expander.c | 1 + 1 file changed, 1 insertion(+) --- a/drivers/scsi/libsas/sas_expander.c +++ b/drivers/scsi/libsas/sas_expander.c @@ -293,6 +293,7 @@ static void sas_set_ex_phy(struct domain phy->phy->minimum_linkrate = dr->pmin_linkrate; phy->phy->maximum_linkrate = dr->pmax_linkrate; phy->phy->negotiated_linkrate = phy->linkrate; + phy->phy->enabled = (phy->linkrate != SAS_PHY_DISABLED); skip: if (new_phy) Patches currently in stable-queue which might be from chenxiang66(a)hisilicon.com are queue-4.14/scsi-libsas-initialize-sas_phy-status-according-to-response-of-discover.patch queue-4.14/scsi-libsas-fix-error-when-getting-phy-events.patch queue-4.14/scsi-libsas-fix-memory-leak-in-sas_smp_get_phy_events.patch

7 years, 5 months

1
0
0 0

Patch "scsi: libsas: fix memory leak in sas_smp_get_phy_events()" has been added to the 4.14-stable tree

by gregkh＠linuxfoundation.org

This is a note to let you know that I've just added the patch titled scsi: libsas: fix memory leak in sas_smp_get_phy_events() to the 4.14-stable tree which can be found at: http://www.kernel.org/git/?p=linux/kernel/git/stable/stable-queue.git;a=sum… The filename of the patch is: scsi-libsas-fix-memory-leak-in-sas_smp_get_phy_events.patch and it can be found in the queue-4.14 subdirectory. If you, or anyone else, feels it should not be added to the stable tree, please let <stable(a)vger.kernel.org> know about it. >From foo@baz Mon Apr 9 13:58:16 CEST 2018 From: Jason Yan <yanaijie(a)huawei.com> Date: Thu, 4 Jan 2018 21:04:31 +0800 Subject: scsi: libsas: fix memory leak in sas_smp_get_phy_events() From: Jason Yan <yanaijie(a)huawei.com> [ Upstream commit 4a491b1ab11ca0556d2fda1ff1301e862a2d44c4 ] We've got a memory leak with the following producer: while true; do cat /sys/class/sas_phy/phy-1:0:12/invalid_dword_count >/dev/null; done The buffer req is allocated and not freed after we return. Fix it. Fixes: 2908d778ab3e ("[SCSI] aic94xx: new driver") Signed-off-by: Jason Yan <yanaijie(a)huawei.com> CC: John Garry <john.garry(a)huawei.com> CC: chenqilin <chenqilin2(a)huawei.com> CC: chenxiang <chenxiang66(a)hisilicon.com> Reviewed-by: Christoph Hellwig <hch(a)lst.de> Reviewed-by: Hannes Reinecke <hare(a)suse.com> Signed-off-by: Martin K. Petersen <martin.petersen(a)oracle.com> Signed-off-by: Sasha Levin <alexander.levin(a)microsoft.com> Signed-off-by: Greg Kroah-Hartman <gregkh(a)linuxfoundation.org> --- drivers/scsi/libsas/sas_expander.c | 1 + 1 file changed, 1 insertion(+) --- a/drivers/scsi/libsas/sas_expander.c +++ b/drivers/scsi/libsas/sas_expander.c @@ -695,6 +695,7 @@ int sas_smp_get_phy_events(struct sas_ph phy->phy_reset_problem_count = scsi_to_u32(&resp[24]); out: + kfree(req); kfree(resp); return res; Patches currently in stable-queue which might be from yanaijie(a)huawei.com are queue-4.14/scsi-libsas-initialize-sas_phy-status-according-to-response-of-discover.patch queue-4.14/scsi-libsas-fix-error-when-getting-phy-events.patch queue-4.14/scsi-libsas-fix-memory-leak-in-sas_smp_get_phy_events.patch

7 years, 5 months

1
0
0 0

Patch "scsi: libiscsi: Allow sd_shutdown on bad transport" has been added to the 4.14-stable tree

by gregkh＠linuxfoundation.org

This is a note to let you know that I've just added the patch titled scsi: libiscsi: Allow sd_shutdown on bad transport to the 4.14-stable tree which can be found at: http://www.kernel.org/git/?p=linux/kernel/git/stable/stable-queue.git;a=sum… The filename of the patch is: scsi-libiscsi-allow-sd_shutdown-on-bad-transport.patch and it can be found in the queue-4.14 subdirectory. If you, or anyone else, feels it should not be added to the stable tree, please let <stable(a)vger.kernel.org> know about it. >From foo@baz Mon Apr 9 13:58:16 CEST 2018 From: Rafael David Tinoco <rafael.tinoco(a)canonical.com> Date: Thu, 7 Dec 2017 19:59:13 -0200 Subject: scsi: libiscsi: Allow sd_shutdown on bad transport From: Rafael David Tinoco <rafael.tinoco(a)canonical.com> [ Upstream commit d754941225a7dbc61f6dd2173fa9498049f9a7ee ] If, for any reason, userland shuts down iscsi transport interfaces before proper logouts - like when logging in to LUNs manually, without logging out on server shutdown, or when automated scripts can't umount/logout from logged LUNs - kernel will hang forever on its sd_sync_cache() logic, after issuing the SYNCHRONIZE_CACHE cmd to all still existent paths. PID: 1 TASK: ffff8801a69b8000 CPU: 1 COMMAND: "systemd-shutdow" #0 [ffff8801a69c3a30] __schedule at ffffffff8183e9ee #1 [ffff8801a69c3a80] schedule at ffffffff8183f0d5 #2 [ffff8801a69c3a98] schedule_timeout at ffffffff81842199 #3 [ffff8801a69c3b40] io_schedule_timeout at ffffffff8183e604 #4 [ffff8801a69c3b70] wait_for_completion_io_timeout at ffffffff8183fc6c #5 [ffff8801a69c3bd0] blk_execute_rq at ffffffff813cfe10 #6 [ffff8801a69c3c88] scsi_execute at ffffffff815c3fc7 #7 [ffff8801a69c3cc8] scsi_execute_req_flags at ffffffff815c60fe #8 [ffff8801a69c3d30] sd_sync_cache at ffffffff815d37d7 #9 [ffff8801a69c3da8] sd_shutdown at ffffffff815d3c3c This happens because iscsi_eh_cmd_timed_out(), the transport layer timeout helper, would tell the queue timeout function (scsi_times_out) to reset the request timer over and over, until the session state is back to logged in state. Unfortunately, during server shutdown, this might never happen again. Other option would be "not to handle" the issue in the transport layer. That would trigger the error handler logic, which would also need the session state to be logged in again. Best option, for such case, is to tell upper layers that the command was handled during the transport layer error handler helper, marking it as DID_NO_CONNECT, which will allow completion and inform about the problem. After the session was marked as ISCSI_STATE_FAILED, due to the first timeout during the server shutdown phase, all subsequent cmds will fail to be queued, allowing upper logic to fail faster. Signed-off-by: Rafael David Tinoco <rafael.tinoco(a)canonical.com> Reviewed-by: Lee Duncan <lduncan(a)suse.com> Signed-off-by: Martin K. Petersen <martin.petersen(a)oracle.com> Signed-off-by: Sasha Levin <alexander.levin(a)microsoft.com> Signed-off-by: Greg Kroah-Hartman <gregkh(a)linuxfoundation.org> --- drivers/scsi/libiscsi.c | 24 +++++++++++++++++++++++- 1 file changed, 23 insertions(+), 1 deletion(-) --- a/drivers/scsi/libiscsi.c +++ b/drivers/scsi/libiscsi.c @@ -1696,6 +1696,15 @@ int iscsi_queuecommand(struct Scsi_Host */ switch (session->state) { case ISCSI_STATE_FAILED: + /* + * cmds should fail during shutdown, if the session + * state is bad, allowing completion to happen + */ + if (unlikely(system_state != SYSTEM_RUNNING)) { + reason = FAILURE_SESSION_FAILED; + sc->result = DID_NO_CONNECT << 16; + break; + } case ISCSI_STATE_IN_RECOVERY: reason = FAILURE_SESSION_IN_RECOVERY; sc->result = DID_IMM_RETRY << 16; @@ -1981,6 +1990,19 @@ enum blk_eh_timer_return iscsi_eh_cmd_ti if (session->state != ISCSI_STATE_LOGGED_IN) { /* + * During shutdown, if session is prematurely disconnected, + * recovery won't happen and there will be hung cmds. Not + * handling cmds would trigger EH, also bad in this case. + * Instead, handle cmd, allow completion to happen and let + * upper layer to deal with the result. + */ + if (unlikely(system_state != SYSTEM_RUNNING)) { + sc->result = DID_NO_CONNECT << 16; + ISCSI_DBG_EH(session, "sc on shutdown, handled\n"); + rc = BLK_EH_HANDLED; + goto done; + } + /* * We are probably in the middle of iscsi recovery so let * that complete and handle the error. */ @@ -2084,7 +2106,7 @@ done: task->last_timeout = jiffies; spin_unlock(&session->frwd_lock); ISCSI_DBG_EH(session, "return %s\n", rc == BLK_EH_RESET_TIMER ? - "timer reset" : "nh"); + "timer reset" : "shutdown or nh"); return rc; } EXPORT_SYMBOL_GPL(iscsi_eh_cmd_timed_out); Patches currently in stable-queue which might be from rafael.tinoco(a)canonical.com are queue-4.14/scsi-libiscsi-allow-sd_shutdown-on-bad-transport.patch

7 years, 5 months

1
0
0 0

2025

2024

2023

2022

2021

2020

2019

2018

2017

Linux-stable-mirror