- Linux-stable-mirror - lists.linaro.org

Applied "spi: fix IDR collision on systems with both fixed and dynamic SPI bus numbers" to the spi tree

by Mark Brown

The patch spi: fix IDR collision on systems with both fixed and dynamic SPI bus numbers has been applied to the spi tree at https://git.kernel.org/pub/scm/linux/kernel/git/broonie/spi.git All being well this means that it will be integrated into the linux-next tree (usually sometime in the next 24 hours) and sent to Linus during the next merge window (or sooner if it is a bug fix), however if problems are discovered then the patch may be dropped or reverted. You may get further e-mails resulting from automated or manual testing and review of the tree, please engage with people reporting problems and send followup patches addressing any issues that are reported if needed. If any updates are required or you are submitting further changes they should be sent as incremental updates against current git, existing patches will not be replaced. Please add any relevant lists and maintainers to the CCs when replying to this mail. Thanks, Mark >From 1a4327fbf4554d5b78d75b19a13d40d6de220159 Mon Sep 17 00:00:00 2001 From: Kirill Kapranov <kirill.kapranov(a)compulab.co.il> Date: Mon, 13 Aug 2018 19:48:10 +0300 Subject: [PATCH] spi: fix IDR collision on systems with both fixed and dynamic SPI bus numbers On systems where some controllers get a dynamic ID assigned and some have a fixed number (e.g. from ACPI tables), the current implementation might run into an IDR collision: in case of a fixed bus number is gotten by a driver (but not marked busy in IDR tree) and a driver with dynamic bus number gets the same ID and predictably fails. Fix this by means of checking-in fixed IDsin IDR as far as dynamic ones at the moment of the controller registration. Fixes: 9b61e302210e (spi: Pick spi bus number from Linux idr or spi alias) Signed-off-by: Kirill Kapranov <kirill.kapranov(a)compulab.co.il> Signed-off-by: Mark Brown <broonie(a)kernel.org> Cc: stable(a)vger.kernel.org --- drivers/spi/spi.c | 9 +++++++++ 1 file changed, 9 insertions(+) diff --git a/drivers/spi/spi.c b/drivers/spi/spi.c index ec395a6baf9c..a00d006d4c3a 100644 --- a/drivers/spi/spi.c +++ b/drivers/spi/spi.c @@ -2170,6 +2170,15 @@ int spi_register_controller(struct spi_controller *ctlr) if (WARN(id < 0, "couldn't get idr")) return id; ctlr->bus_num = id; + } else { + /* devices with a fixed bus num must check-in with the num */ + mutex_lock(&board_lock); + id = idr_alloc(&spi_master_idr, ctlr, ctlr->bus_num, + ctlr->bus_num + 1, GFP_KERNEL); + mutex_unlock(&board_lock); + if (WARN(id < 0, "couldn't get idr")) + return id == -ENOSPC ? -EBUSY : id; + ctlr->bus_num = id; } INIT_LIST_HEAD(&ctlr->queue); spin_lock_init(&ctlr->queue_lock); -- 2.18.0

7 years

1
0
0 0

[PATCH v4.9 1/2] x86/cpu/amd: Limit cpu_core_id fixup to families older than F17h

by Guenter Roeck

From: Suravee Suthikulpanit <suravee.suthikulpanit(a)amd.com> commit b89b41d0b8414690ec0030c134b8bde209e6d06c upstream Current cpu_core_id fixup causes downcored F17h configurations to be incorrect: NODE: 0 processor 0 core id : 0 processor 1 core id : 1 processor 2 core id : 2 processor 3 core id : 4 processor 4 core id : 5 processor 5 core id : 0 NODE: 1 processor 6 core id : 2 processor 7 core id : 3 processor 8 core id : 4 processor 9 core id : 0 processor 10 core id : 1 processor 11 core id : 2 Code that relies on the cpu_core_id, like match_smt(), for example, which builds the thread siblings masks used by the scheduler, is mislead. So, limit the fixup to pre-F17h machines. The new value for cpu_core_id for F17h and later will represent the CPUID_Fn8000001E_EBX[CoreId], which is guaranteed to be unique for each core within a socket. This way we have: NODE: 0 processor 0 core id : 0 processor 1 core id : 1 processor 2 core id : 2 processor 3 core id : 4 processor 4 core id : 5 processor 5 core id : 6 NODE: 1 processor 6 core id : 8 processor 7 core id : 9 processor 8 core id : 10 processor 9 core id : 12 processor 10 core id : 13 processor 11 core id : 14 Signed-off-by: Suravee Suthikulpanit <suravee.suthikulpanit(a)amd.com> [ Heavily massaged. ] Signed-off-by: Borislav Petkov <bp(a)suse.de> Cc: Linus Torvalds <torvalds(a)linux-foundation.org> Cc: Peter Zijlstra <peterz(a)infradead.org> Cc: Thomas Gleixner <tglx(a)linutronix.de> Cc: Yazen Ghannam <Yazen.Ghannam(a)amd.com> Link: http://lkml.kernel.org/r/20170731085159.9455-2-bp@alien8.de Signed-off-by: Ingo Molnar <mingo(a)kernel.org> Signed-off-by: Guenter Roeck <linux(a)roeck-us.net> --- arch/x86/kernel/cpu/amd.c | 24 +++++++++++++++++------- 1 file changed, 17 insertions(+), 7 deletions(-) diff --git a/arch/x86/kernel/cpu/amd.c b/arch/x86/kernel/cpu/amd.c index 6de596449488..e864ff6cd8bd 100644 --- a/arch/x86/kernel/cpu/amd.c +++ b/arch/x86/kernel/cpu/amd.c @@ -305,6 +305,22 @@ static void amd_get_topology_early(struct cpuinfo_x86 *c) } /* + * Fix up cpu_core_id for pre-F17h systems to be in the + * [0 .. cores_per_node - 1] range. Not really needed but + * kept so as not to break existing setups. + */ +static void legacy_fixup_core_id(struct cpuinfo_x86 *c) +{ + u32 cus_per_node; + + if (c->x86 >= 0x17) + return; + + cus_per_node = c->x86_max_cores / nodes_per_socket; + c->cpu_core_id %= cus_per_node; +} + +/* * Fixup core topology information for * (1) AMD multi-node processors * Assumption: Number of cores in each internal node is the same. @@ -359,15 +375,9 @@ static void amd_get_topology(struct cpuinfo_x86 *c) } else return; - /* fixup multi-node processor information */ if (nodes_per_socket > 1) { - u32 cus_per_node; - set_cpu_cap(c, X86_FEATURE_AMD_DCM); - cus_per_node = c->x86_max_cores / nodes_per_socket; - - /* core id has to be in the [0 .. cores_per_node - 1] range */ - c->cpu_core_id %= cus_per_node; + legacy_fixup_core_id(c); } } #endif -- 2.7.4

7 years

2
2
0 0

[PATCH v4.14, v4.17] x86/CPU/AMD: Have smp_num_siblings and cpu_llc_id always be present

by Guenter Roeck

From: Borislav Petkov <bpetkov(a)suse.de> commit f8b64d08dde2714c62751d18ba77f4aeceb161d3 upstream Move smp_num_siblings and cpu_llc_id to cpu/common.c so that they're always present as symbols and not only in the CONFIG_SMP case. Then, other code using them doesn't need ugly ifdeffery anymore. Get rid of some ifdeffery. Signed-off-by: Borislav Petkov <bpetkov(a)suse.de> Signed-off-by: Suravee Suthikulpanit <suravee.suthikulpanit(a)amd.com> Signed-off-by: Borislav Petkov <bp(a)suse.de> Signed-off-by: Thomas Gleixner <tglx(a)linutronix.de> Link: http://lkml.kernel.org/r/1524864877-111962-2-git-send-email-suravee.suthiku… Signed-off-by: Guenter Roeck <linux(a)roeck-us.net> --- Needed for x86_64:allnoconfig. arch/x86/include/asm/smp.h | 1 - arch/x86/kernel/cpu/amd.c | 10 +--------- arch/x86/kernel/cpu/common.c | 7 +++++++ arch/x86/kernel/smpboot.c | 7 ------- 4 files changed, 8 insertions(+), 17 deletions(-) diff --git a/arch/x86/include/asm/smp.h b/arch/x86/include/asm/smp.h index 461f53d27708..fe2ee61880a8 100644 --- a/arch/x86/include/asm/smp.h +++ b/arch/x86/include/asm/smp.h @@ -170,7 +170,6 @@ static inline int wbinvd_on_all_cpus(void) wbinvd(); return 0; } -#define smp_num_siblings 1 #endif /* CONFIG_SMP */ extern unsigned disabled_cpus; diff --git a/arch/x86/kernel/cpu/amd.c b/arch/x86/kernel/cpu/amd.c index bb013735510a..dda741bd5789 100644 --- a/arch/x86/kernel/cpu/amd.c +++ b/arch/x86/kernel/cpu/amd.c @@ -298,7 +298,6 @@ static int nearby_node(int apicid) } #endif -#ifdef CONFIG_SMP /* * Fix up cpu_core_id for pre-F17h systems to be in the * [0 .. cores_per_node - 1] range. Not really needed but @@ -382,7 +381,6 @@ static void amd_get_topology(struct cpuinfo_x86 *c) legacy_fixup_core_id(c); } } -#endif /* * On a AMD dual core setup the lower bits of the APIC id distinguish the cores. @@ -390,7 +388,6 @@ static void amd_get_topology(struct cpuinfo_x86 *c) */ static void amd_detect_cmp(struct cpuinfo_x86 *c) { -#ifdef CONFIG_SMP unsigned bits; int cpu = smp_processor_id(); @@ -402,16 +399,11 @@ static void amd_detect_cmp(struct cpuinfo_x86 *c) /* use socket ID also for last level cache */ per_cpu(cpu_llc_id, cpu) = c->phys_proc_id; amd_get_topology(c); -#endif } u16 amd_get_nb_id(int cpu) { - u16 id = 0; -#ifdef CONFIG_SMP - id = per_cpu(cpu_llc_id, cpu); -#endif - return id; + return per_cpu(cpu_llc_id, cpu); } EXPORT_SYMBOL_GPL(amd_get_nb_id); diff --git a/arch/x86/kernel/cpu/common.c b/arch/x86/kernel/cpu/common.c index c925498224d0..dd02ee4fa8cd 100644 --- a/arch/x86/kernel/cpu/common.c +++ b/arch/x86/kernel/cpu/common.c @@ -66,6 +66,13 @@ cpumask_var_t cpu_callin_mask; /* representing cpus for which sibling maps can be computed */ cpumask_var_t cpu_sibling_setup_mask; +/* Number of siblings per CPU package */ +int smp_num_siblings = 1; +EXPORT_SYMBOL(smp_num_siblings); + +/* Last level cache ID of each logical CPU */ +DEFINE_PER_CPU_READ_MOSTLY(u16, cpu_llc_id) = BAD_APICID; + /* correctly size the local cpu masks */ void __init setup_cpu_local_masks(void) { diff --git a/arch/x86/kernel/smpboot.c b/arch/x86/kernel/smpboot.c index 6fd12e0a07c9..5ebb0dbcf4f7 100644 --- a/arch/x86/kernel/smpboot.c +++ b/arch/x86/kernel/smpboot.c @@ -80,13 +80,6 @@ #include <asm/spec-ctrl.h> #include <asm/hw_irq.h> -/* Number of siblings per CPU package */ -int smp_num_siblings = 1; -EXPORT_SYMBOL(smp_num_siblings); - -/* Last level cache ID of each logical CPU */ -DEFINE_PER_CPU_READ_MOSTLY(u16, cpu_llc_id) = BAD_APICID; - /* representing HT siblings of each logical CPU */ DEFINE_PER_CPU_READ_MOSTLY(cpumask_var_t, cpu_sibling_map); EXPORT_PER_CPU_SYMBOL(cpu_sibling_map); -- 2.7.4

7 years

2
1
0 0

[PATCH V2] EDAC, amd64: Add Family 17h Model 10h support.

by Michael Jin

Add support for ECC error decoding on family 17h models 10h-2fh. Link: https://lkml.kernel.org/r/20180810193623.24629-1-mikhail.jin@gmail.com Cc: stable(a)vger.kernel.org Signed-off-by: Michael Jin <mikhail.jin(a)gmail.com> --- drivers/edac/amd64_edac.c | 15 +++++++++++++++ drivers/edac/amd64_edac.h | 3 +++ 2 files changed, 18 insertions(+) diff --git a/drivers/edac/amd64_edac.c b/drivers/edac/amd64_edac.c index 18aeabb1d5ee..2d7b6d37d6ec 100644 --- a/drivers/edac/amd64_edac.c +++ b/drivers/edac/amd64_edac.c @@ -2200,6 +2200,15 @@ static struct amd64_family_type family_types[] = { .dbam_to_cs = f17_base_addr_to_cs_size, } }, + [F17_M10H_CPUS] = { + .ctl_name = "F17h_M10h", + .f0_id = PCI_DEVICE_ID_AMD_17H_M10H_DF_F0, + .f6_id = PCI_DEVICE_ID_AMD_17H_M10H_DF_F6, + .ops = { + .early_channel_count = f17_early_channel_count, + .dbam_to_cs = f17_base_addr_to_cs_size, + } + }, }; /* @@ -3188,6 +3197,12 @@ static struct amd64_family_type *per_family_init(struct amd64_pvt *pvt) break; case 0x17: + /* Check if CPU model is in range 10h-2fh */ + if (pvt->model >= 0x10 && pvt->model <= 0x2f) { + fam_type = &family_types[F17_M10H_CPUS]; + pvt->ops = &family_types[F17_M10H_CPUS].ops; + break; + } fam_type = &family_types[F17_CPUS]; pvt->ops = &family_types[F17_CPUS].ops; break; diff --git a/drivers/edac/amd64_edac.h b/drivers/edac/amd64_edac.h index 1d4b74e9a037..4242f8e39c18 100644 --- a/drivers/edac/amd64_edac.h +++ b/drivers/edac/amd64_edac.h @@ -115,6 +115,8 @@ #define PCI_DEVICE_ID_AMD_16H_M30H_NB_F2 0x1582 #define PCI_DEVICE_ID_AMD_17H_DF_F0 0x1460 #define PCI_DEVICE_ID_AMD_17H_DF_F6 0x1466 +#define PCI_DEVICE_ID_AMD_17H_M10H_DF_F0 0x15e8 +#define PCI_DEVICE_ID_AMD_17H_M10H_DF_F6 0x15ee /* * Function 1 - Address Map @@ -281,6 +283,7 @@ enum amd_families { F16_CPUS, F16_M30H_CPUS, F17_CPUS, + F17_M10H_CPUS, NUM_FAMILIES, }; -- 2.14.3 (Apple Git-98)

7 years

1
0
0 0

Please apply 501228470077 ("ext4: fix check to prevent initializing reserved inodes") to 4.4.y and 4.9.y

by Alistair Strachan

The commit 8844618d8aa7 ("ext4: only look at the bg_flags field if it is valid") introduced an issue which are seeing when running "adb remount" on Android devices with the affected kernels. This change appears on 4.4.y and later. > EXT4-fs error (device vdd): ext4_has_uninit_itable:2882: comm remount svc 50: Inode table for bg 0 marked as needing zeroing > Kernel panic - not syncing: EXT4-fs (device vdd): panic forced after error Looks like this fix was already picked up for 4.14.y, 4.17.y but (AFAIK) it isn't on anybody's radar for 4.4 and 4.9. Thanks!

7 years

2
1
0 0

[PATCH v4.4.y] x86/speculation/l1tf: Unbreak !__HAVE_ARCH_PFN_MODIFY_ALLOWED architectures

by Guenter Roeck

From: Jiri Kosina <jkosina(a)suse.cz> commit 6c26fcd2abfe0a56bbd95271fce02df2896cfd24 upstream pfn_modify_allowed() and arch_has_pfn_modify_check() are outside of the !__ASSEMBLY__ section in include/asm-generic/pgtable.h, which confuses assembler on archs that don't have __HAVE_ARCH_PFN_MODIFY_ALLOWED (e.g. ia64) and breaks build: include/asm-generic/pgtable.h: Assembler messages: include/asm-generic/pgtable.h:538: Error: Unknown opcode `static inline bool pfn_modify_allowed(unsigned long pfn,pgprot_t prot)' include/asm-generic/pgtable.h:540: Error: Unknown opcode `return true' include/asm-generic/pgtable.h:543: Error: Unknown opcode `static inline bool arch_has_pfn_modify_check(void)' include/asm-generic/pgtable.h:545: Error: Unknown opcode `return false' arch/ia64/kernel/entry.S:69: Error: `mov' does not fit into bundle Move those two static inlines into the !__ASSEMBLY__ section so that they don't confuse the asm build pass. Fixes: 42e4089c7890 ("x86/speculation/l1tf: Disallow non privileged high MMIO PROT_NONE mappings") Signed-off-by: Jiri Kosina <jkosina(a)suse.cz> Signed-off-by: Thomas Gleixner <tglx(a)linutronix.de> [groeck: Context changes] Signed-off-by: Guenter Roeck <linux(a)roeck-us.net> --- The patch looks all different from the original, but that is git in action. include/asm-generic/pgtable.h | 12 ++++++------ 1 file changed, 6 insertions(+), 6 deletions(-) diff --git a/include/asm-generic/pgtable.h b/include/asm-generic/pgtable.h index 976f749099ef..dabecb661264 100644 --- a/include/asm-generic/pgtable.h +++ b/include/asm-generic/pgtable.h @@ -799,12 +799,6 @@ static inline int pmd_free_pte_page(pmd_t *pmd) } #endif /* CONFIG_HAVE_ARCH_HUGE_VMAP */ -#endif /* !__ASSEMBLY__ */ - -#ifndef io_remap_pfn_range -#define io_remap_pfn_range remap_pfn_range -#endif - #ifndef __HAVE_ARCH_PFN_MODIFY_ALLOWED static inline bool pfn_modify_allowed(unsigned long pfn, pgprot_t prot) { @@ -815,6 +809,12 @@ static inline bool arch_has_pfn_modify_check(void) { return false; } +#endif /* !_HAVE_ARCH_PFN_MODIFY_ALLOWED */ + +#endif /* !__ASSEMBLY__ */ + +#ifndef io_remap_pfn_range +#define io_remap_pfn_range remap_pfn_range #endif #endif /* _ASM_GENERIC_PGTABLE_H */ -- 2.7.4

7 years

2
1
0 0

[PATCH v4.9] x86/speculation/l1tf: Unbreak !__HAVE_ARCH_PFN_MODIFY_ALLOWED architectures

by Guenter Roeck

From: Jiri Kosina <jkosina(a)suse.cz> commit 6c26fcd2abfe0a56bbd95271fce02df2896cfd24 upstream pfn_modify_allowed() and arch_has_pfn_modify_check() are outside of the !__ASSEMBLY__ section in include/asm-generic/pgtable.h, which confuses assembler on archs that don't have __HAVE_ARCH_PFN_MODIFY_ALLOWED (e.g. ia64) and breaks build: include/asm-generic/pgtable.h: Assembler messages: include/asm-generic/pgtable.h:538: Error: Unknown opcode `static inline bool pfn_modify_allowed(unsigned long pfn,pgprot_t prot)' include/asm-generic/pgtable.h:540: Error: Unknown opcode `return true' include/asm-generic/pgtable.h:543: Error: Unknown opcode `static inline bool arch_has_pfn_modify_check(void)' include/asm-generic/pgtable.h:545: Error: Unknown opcode `return false' arch/ia64/kernel/entry.S:69: Error: `mov' does not fit into bundle Move those two static inlines into the !__ASSEMBLY__ section so that they don't confuse the asm build pass. Fixes: 42e4089c7890 ("x86/speculation/l1tf: Disallow non privileged high MMIO PROT_NONE mappings") Signed-off-by: Jiri Kosina <jkosina(a)suse.cz> Signed-off-by: Thomas Gleixner <tglx(a)linutronix.de> (cherry picked from commit 6c26fcd2abfe0a56bbd95271fce02df2896cfd24) [groeck: Context changes] Signed-off-by: Guenter Roeck <linux(a)roeck-us.net> --- include/asm-generic/pgtable.h | 25 +++++++++++++------------ 1 file changed, 13 insertions(+), 12 deletions(-) diff --git a/include/asm-generic/pgtable.h b/include/asm-generic/pgtable.h index 0ffe4051ae2e..a88ea9e37a25 100644 --- a/include/asm-generic/pgtable.h +++ b/include/asm-generic/pgtable.h @@ -828,6 +828,19 @@ static inline int pmd_free_pte_page(pmd_t *pmd) struct file; int phys_mem_access_prot_allowed(struct file *file, unsigned long pfn, unsigned long size, pgprot_t *vma_prot); + +#ifndef __HAVE_ARCH_PFN_MODIFY_ALLOWED +static inline bool pfn_modify_allowed(unsigned long pfn, pgprot_t prot) +{ + return true; +} + +static inline bool arch_has_pfn_modify_check(void) +{ + return false; +} +#endif /* !_HAVE_ARCH_PFN_MODIFY_ALLOWED */ + #endif /* !__ASSEMBLY__ */ #ifndef io_remap_pfn_range @@ -842,16 +855,4 @@ int phys_mem_access_prot_allowed(struct file *file, unsigned long pfn, #endif #endif -#ifndef __HAVE_ARCH_PFN_MODIFY_ALLOWED -static inline bool pfn_modify_allowed(unsigned long pfn, pgprot_t prot) -{ - return true; -} - -static inline bool arch_has_pfn_modify_check(void) -{ - return false; -} -#endif - #endif /* _ASM_GENERIC_PGTABLE_H */ -- 2.7.4

7 years

2
1
0 0

[PATCH v4.14 v4.17 v4.18] x86/speculation/l1tf: Unbreak !__HAVE_ARCH_PFN_MODIFY_ALLOWED architectures

by Guenter Roeck

From: Jiri Kosina <jkosina(a)suse.cz> commit 6c26fcd2abfe0a56bbd95271fce02df2896cfd24 upstream pfn_modify_allowed() and arch_has_pfn_modify_check() are outside of the !__ASSEMBLY__ section in include/asm-generic/pgtable.h, which confuses assembler on archs that don't have __HAVE_ARCH_PFN_MODIFY_ALLOWED (e.g. ia64) and breaks build: include/asm-generic/pgtable.h: Assembler messages: include/asm-generic/pgtable.h:538: Error: Unknown opcode `static inline bool pfn_modify_allowed(unsigned long pfn,pgprot_t prot)' include/asm-generic/pgtable.h:540: Error: Unknown opcode `return true' include/asm-generic/pgtable.h:543: Error: Unknown opcode `static inline bool arch_has_pfn_modify_check(void)' include/asm-generic/pgtable.h:545: Error: Unknown opcode `return false' arch/ia64/kernel/entry.S:69: Error: `mov' does not fit into bundle Move those two static inlines into the !__ASSEMBLY__ section so that they don't confuse the asm build pass. Fixes: 42e4089c7890 ("x86/speculation/l1tf: Disallow non privileged high MMIO PROT_NONE mappings") Signed-off-by: Jiri Kosina <jkosina(a)suse.cz> Signed-off-by: Thomas Gleixner <tglx(a)linutronix.de> Signed-off-by: Guenter Roeck <linux(a)roeck-us.net> --- include/asm-generic/pgtable.h | 24 ++++++++++++------------ 1 file changed, 12 insertions(+), 12 deletions(-) diff --git a/include/asm-generic/pgtable.h b/include/asm-generic/pgtable.h index f50d253f213f..46a2f5d9aa25 100644 --- a/include/asm-generic/pgtable.h +++ b/include/asm-generic/pgtable.h @@ -1055,6 +1055,18 @@ int phys_mem_access_prot_allowed(struct file *file, unsigned long pfn, static inline void init_espfix_bsp(void) { } #endif +#ifndef __HAVE_ARCH_PFN_MODIFY_ALLOWED +static inline bool pfn_modify_allowed(unsigned long pfn, pgprot_t prot) +{ + return true; +} + +static inline bool arch_has_pfn_modify_check(void) +{ + return false; +} +#endif /* !_HAVE_ARCH_PFN_MODIFY_ALLOWED */ + #endif /* !__ASSEMBLY__ */ #ifndef io_remap_pfn_range @@ -1069,16 +1081,4 @@ static inline void init_espfix_bsp(void) { } #endif #endif -#ifndef __HAVE_ARCH_PFN_MODIFY_ALLOWED -static inline bool pfn_modify_allowed(unsigned long pfn, pgprot_t prot) -{ - return true; -} - -static inline bool arch_has_pfn_modify_check(void) -{ - return false; -} -#endif - #endif /* _ASM_GENERIC_PGTABLE_H */ -- 2.7.4

7 years

1
0
0 0

+ zram-fix-bug-storing-backing_dev.patch added to -mm tree

by akpm＠linux-foundation.org

The patch titled Subject: drivers/block/zram/zram_drv.c: fix bug storing backing_dev has been added to the -mm tree. Its filename is zram-fix-bug-storing-backing_dev.patch This patch should soon appear at http://ozlabs.org/~akpm/mmots/broken-out/zram-fix-bug-storing-backing_dev.p… and later at http://ozlabs.org/~akpm/mmotm/broken-out/zram-fix-bug-storing-backing_dev.p… Before you just go and hit "reply", please: a) Consider who else should be cc'ed b) Prefer to cc a suitable mailing list as well c) Ideally: find the original patch on the mailing list and do a reply-to-all to that, adding suitable additional cc's *** Remember to use Documentation/process/submit-checklist.rst when testing your code *** The -mm tree is included into linux-next and is updated there every 3-4 working days ------------------------------------------------------ From: Peter Kalauskas <peskal(a)google.com> Subject: drivers/block/zram/zram_drv.c: fix bug storing backing_dev The call to strlcpy in backing_dev_store is incorrect. It should take the size of the destination buffer instead of the size of the source buffer. Additionally, ignore the newline character (\n) when reading the new file_name buffer. This makes it possible to set the backing_dev as follows: echo /dev/sdX > /sys/block/zram0/backing_dev The reason it worked before was the fact that strlcpy() copies 'len - 1' bytes, which is strlen(buf) - 1 in our case, so it accidentally didn't copy the trailing new line symbol. Which also means that "echo -n /dev/sdX" most likely was broken. Signed-off-by: Peter Kalauskas <peskal(a)google.com> Link: http://lkml.kernel.org/r/20180813061623.GC64836@rodete-desktop-imager.corp.… Acked-by: Minchan Kim <minchan(a)kernel.org> Reviewed-by: Sergey Senozhatsky <sergey.senozhatsky(a)gmail.com> Cc: <stable(a)vger.kernel.org> [4.14+] Signed-off-by: Andrew Morton <akpm(a)linux-foundation.org> --- drivers/block/zram/zram_drv.c | 7 ++++++- 1 file changed, 6 insertions(+), 1 deletion(-) --- a/drivers/block/zram/zram_drv.c~zram-fix-bug-storing-backing_dev +++ a/drivers/block/zram/zram_drv.c @@ -337,6 +337,7 @@ static ssize_t backing_dev_store(struct struct device_attribute *attr, const char *buf, size_t len) { char *file_name; + size_t sz; struct file *backing_dev = NULL; struct inode *inode; struct address_space *mapping; @@ -357,7 +358,11 @@ static ssize_t backing_dev_store(struct goto out; } - strlcpy(file_name, buf, len); + strlcpy(file_name, buf, PATH_MAX); + /* ignore trailing newline */ + sz = strlen(file_name); + if (sz > 0 && file_name[sz - 1] == '\n') + file_name[sz - 1] = 0x00; backing_dev = filp_open(file_name, O_RDWR|O_LARGEFILE, 0); if (IS_ERR(backing_dev)) { _ Patches currently in -mm which might be from peskal(a)google.com are zram-fix-bug-storing-backing_dev.patch

7 years

1
0
0 0

kasan patches

by Nick Desaulniers

These patches are needed for kasan+clang support. I confirmed they apply cleanly in order (top to bottom): 4.9: commit c5caf21ab0cf8 ("kasan: turn on -fsanitize-address-use-after-scope") commit 0e410e158e5b ("kasan: don't emit builtin calls when sanitization is off") 4.4: commit c5caf21ab0cf8 ("kasan: turn on -fsanitize-address-use-after-scope") === 0e410e158e5b is the one I'm interested in. Looks like it landed in 4.16, and got backported to 4.14-stable. === c5caf21ab0cf8 depends on c6d308534aef6 ("UBSAN: run-time undefined behavior sanity checker"), and I don't want to bring in all of UBSAN to 4.4. I'll send a patch for 0e410e158e5b. -- Thanks, ~Nick Desaulniers

7 years

4
9
0 0

[PATCH] x86/smp: fix non-SMP broken build due to redefinition of apic_id_is_primary_thread

by Vlastimil Babka

The function has an inline "return false;" definition with CONFIG_SMP=n but the "real" definition is also visible leading to "redefinition of ‘apic_id_is_primary_thread’" compiler error. Guard it with #ifdef CONFIG_SMP Signed-off-by: Vlastimil Babka <vbabka(a)suse.cz> Fixes: 6a4d2657e048 ("x86/smp: Provide topology_is_primary_thread()") Cc: stable(a)vger.kernel.org --- arch/x86/kernel/apic/apic.c | 2 ++ 1 file changed, 2 insertions(+) diff --git a/arch/x86/kernel/apic/apic.c b/arch/x86/kernel/apic/apic.c index 87ff6235bbfe..84132eddb5a8 100644 --- a/arch/x86/kernel/apic/apic.c +++ b/arch/x86/kernel/apic/apic.c @@ -2193,6 +2193,7 @@ static int cpuid_to_apicid[] = { [0 ... NR_CPUS - 1] = -1, }; +#ifdef CONFIG_SMP /** * apic_id_is_primary_thread - Check whether APIC ID belongs to a primary thread * @id: APIC ID to check @@ -2207,6 +2208,7 @@ bool apic_id_is_primary_thread(unsigned int apicid) mask = (1U << (fls(smp_num_siblings) - 1)) - 1; return !(apicid & mask); } +#endif /* * Should use this API to allocate logical CPU IDs to keep nr_logical_cpuids -- 2.18.0

7 years

2
1
0 0

[PATCH 4.4] kasan: don't emit builtin calls when sanitization is off

by Nick Desaulniers

From: Andrey Konovalov <andreyknvl(a)google.com> commit 0e410e158e5baa1300bdf678cea4f4e0cf9d8b94 upstream. With KASAN enabled the kernel has two different memset() functions, one with KASAN checks (memset) and one without (__memset). KASAN uses some macro tricks to use the proper version where required. For example memset() calls in mm/slub.c are without KASAN checks, since they operate on poisoned slab object metadata. The issue is that clang emits memset() calls even when there is no memset() in the source code. They get linked with improper memset() implementation and the kernel fails to boot due to a huge amount of KASAN reports during early boot stages. The solution is to add -fno-builtin flag for files with KASAN_SANITIZE := n marker. Link: http://lkml.kernel.org/r/8ffecfffe04088c52c42b92739c2bd8a0bcb3f5e.151638459… Signed-off-by: Andrey Konovalov <andreyknvl(a)google.com> Acked-by: Nick Desaulniers <ndesaulniers(a)google.com> Cc: Masahiro Yamada <yamada.masahiro(a)socionext.com> Cc: Michal Marek <michal.lkml(a)markovi.net> Cc: Andrey Ryabinin <aryabinin(a)virtuozzo.com> Cc: Alexander Potapenko <glider(a)google.com> Cc: Dmitry Vyukov <dvyukov(a)google.com> Cc: <stable(a)vger.kernel.org> Signed-off-by: Andrew Morton <akpm(a)linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds(a)linux-foundation.org> [ Nick : Backported to 4.4 avoiding KUBSAN ] Signed-off-by: Nick Desaulniers <ndesaulniers(a)google.com> --- Makefile | 3 ++- scripts/Makefile.kasan | 3 +++ scripts/Makefile.lib | 2 +- 3 files changed, 6 insertions(+), 2 deletions(-) diff --git a/Makefile b/Makefile index ee92a12e3a4b..4fdd43dd14aa 100644 --- a/Makefile +++ b/Makefile @@ -418,7 +418,8 @@ export MAKE AWK GENKSYMS INSTALLKERNEL PERL PYTHON UTS_MACHINE export HOSTCXX HOSTCXXFLAGS LDFLAGS_MODULE CHECK CHECKFLAGS export KBUILD_CPPFLAGS NOSTDINC_FLAGS LINUXINCLUDE OBJCOPYFLAGS LDFLAGS -export KBUILD_CFLAGS CFLAGS_KERNEL CFLAGS_MODULE CFLAGS_GCOV CFLAGS_KASAN +export KBUILD_CFLAGS CFLAGS_KERNEL CFLAGS_MODULE CFLAGS_GCOV +export CFLAGS_KASAN CFLAGS_KASAN_NOSANITIZE export KBUILD_AFLAGS AFLAGS_KERNEL AFLAGS_MODULE export KBUILD_AFLAGS_MODULE KBUILD_CFLAGS_MODULE KBUILD_LDFLAGS_MODULE export KBUILD_AFLAGS_KERNEL KBUILD_CFLAGS_KERNEL diff --git a/scripts/Makefile.kasan b/scripts/Makefile.kasan index 37323b0df374..2624d4bf9a45 100644 --- a/scripts/Makefile.kasan +++ b/scripts/Makefile.kasan @@ -28,4 +28,7 @@ else CFLAGS_KASAN := $(CFLAGS_KASAN_MINIMAL) endif endif + +CFLAGS_KASAN_NOSANITIZE := -fno-builtin + endif diff --git a/scripts/Makefile.lib b/scripts/Makefile.lib index 24914e7de944..a2d0e6d32659 100644 --- a/scripts/Makefile.lib +++ b/scripts/Makefile.lib @@ -126,7 +126,7 @@ endif ifeq ($(CONFIG_KASAN),y) _c_flags += $(if $(patsubst n%,, \ $(KASAN_SANITIZE_$(basetarget).o)$(KASAN_SANITIZE)y), \ - $(CFLAGS_KASAN)) + $(CFLAGS_KASAN), $(CFLAGS_KASAN_NOSANITIZE)) endif # If building the kernel in a separate objtree expand all occurrences -- 2.18.0.865.gffc8e1a3cd6-goog

7 years

1
0
0 0

[PATCH] x86/init: fix build with CONFIG_SWAP=n

by Vlastimil Babka

The introduction of generic_max_swapfile_size and arch-specific versions has broken linking on x86 with CONFIG_SWAP=n due to undefined reference to 'generic_max_swapfile_size'. Fix it by compiling the x86-specific max_swapfile_size() only with CONFIG_SWAP=y. Reported-by: Tomas Pruzina <pruzinat(a)gmail.com> Fixes: 377eeaa8e11f ("x86/speculation/l1tf: Limit swap file size to MAX_PA/2") Signed-off-by: Vlastimil Babka <vbabka(a)suse.cz> Cc: stable(a)vger.kernel.org --- arch/x86/mm/init.c | 2 ++ 1 file changed, 2 insertions(+) diff --git a/arch/x86/mm/init.c b/arch/x86/mm/init.c index 156ed8154af8..acfab322fbe0 100644 --- a/arch/x86/mm/init.c +++ b/arch/x86/mm/init.c @@ -914,6 +914,7 @@ void update_cache_mode_entry(unsigned entry, enum page_cache_mode cache) __pte2cachemode_tbl[entry] = cache; } +#ifdef CONFIG_SWAP unsigned long max_swapfile_size(void) { unsigned long pages; @@ -934,3 +935,4 @@ unsigned long max_swapfile_size(void) } return pages; } +#endif -- 2.18.0

7 years

2
1
0 0

[PATCH] x86/kvm/vmx: Remove duplicate l1d flush definitions

by Josh Poimboeuf

These are already defined higher up in the file. Cc: stable(a)vger.kernel.org Signed-off-by: Josh Poimboeuf <jpoimboe(a)redhat.com> --- arch/x86/kvm/vmx.c | 3 --- 1 file changed, 3 deletions(-) diff --git a/arch/x86/kvm/vmx.c b/arch/x86/kvm/vmx.c index 58bba7a7572a..e7691e666479 100644 --- a/arch/x86/kvm/vmx.c +++ b/arch/x86/kvm/vmx.c @@ -9725,9 +9725,6 @@ static int vmx_handle_exit(struct kvm_vcpu *vcpu) * information but as all relevant affected CPUs have 32KiB L1D cache size * there is no point in doing so. */ -#define L1D_CACHE_ORDER 4 -static void *vmx_l1d_flush_pages; - static void vmx_l1d_flush(struct kvm_vcpu *vcpu) { int size = PAGE_SIZE << L1D_CACHE_ORDER; -- 2.17.1

7 years

1
0
0 0

[PATCH] net: sock_diag: Fix spectre v1 gadget in __sock_diag_cmd()

by Jeremy Cline

req->sdiag_family is a user-controlled value that's used as an array index. Sanitize it after the bounds check to avoid speculative out-of-bounds array access. This also protects the sock_is_registered() call, so this removes the sanitize call there. Fixes: e978de7a6d38 ("net: socket: Fix potential spectre v1 gadget in sock_is_registered") Cc: Josh Poimboeuf <jpoimboe(a)redhat.com> Cc: konrad.wilk(a)oracle.com Cc: jamie.iles(a)oracle.com Cc: liran.alon(a)oracle.com Cc: stable(a)vger.kernel.org Signed-off-by: Jeremy Cline <jcline(a)redhat.com> --- Since commit e978de7a6d38 didn't apply cleanly to v4.14, this won't either since it reverts that change. To apply cleanly there, the change to sock_is_registered() needs to be dropped. net/core/sock_diag.c | 2 ++ net/socket.c | 3 +-- 2 files changed, 3 insertions(+), 2 deletions(-) diff --git a/net/core/sock_diag.c b/net/core/sock_diag.c index c37b5be7c5e4..3312a5849a97 100644 --- a/net/core/sock_diag.c +++ b/net/core/sock_diag.c @@ -10,6 +10,7 @@ #include <linux/kernel.h> #include <linux/tcp.h> #include <linux/workqueue.h> +#include <linux/nospec.h> #include <linux/inet_diag.h> #include <linux/sock_diag.h> @@ -218,6 +219,7 @@ static int __sock_diag_cmd(struct sk_buff *skb, struct nlmsghdr *nlh) if (req->sdiag_family >= AF_MAX) return -EINVAL; + req->sdiag_family = array_index_nospec(req->sdiag_family, AF_MAX); if (sock_diag_handlers[req->sdiag_family] == NULL) sock_load_diag_module(req->sdiag_family, 0); diff --git a/net/socket.c b/net/socket.c index 53c907169818..391a0da49ffe 100644 --- a/net/socket.c +++ b/net/socket.c @@ -2679,8 +2679,7 @@ EXPORT_SYMBOL(sock_unregister); bool sock_is_registered(int family) { - return family < NPROTO && - rcu_access_pointer(net_families[array_index_nospec(family, NPROTO)]); + return family < NPROTO && rcu_access_pointer(net_families[family]); } static int __init sock_init(void) -- 2.17.1

7 years

2
1
0 0

Dear Friend,

by Luiscarlosdelgado

Dear Friend, My sincere apologies for this unsolicited mail to you, my name is Barrister Luis Carlos Delgado, theCEO/founder of (LCD ABOGADOS) with offices in Madrid and Portugal. We consult for NGOs, Companiesand individuals on Family Law, Intellectual Property, Real Estate, and Wills. I am consulting you on business grounds: I know that it may surprise you receiving this mail from me since therewas no previous correspondence between us. I have an urgent and very confidential business proposal of(USD$9,500,000.00) (Nine Million Five Hundred Thousand US Dollars only) which I believe that will be a verygood opportunity for both of us, so I decided to contact you on the business. Further details; get back me on my direct contact number below: Tel: +351920414587Fax: +34917692994E-mail: Luis_carlos.delgado(a)consultant.comYour swift response will be highly recommended and appreciated, and I shall provide you with more detailsabout my urgent business proposal.Note: If my approach offends your moral ethics do accept my sincere apology, if on the contrary you wish towork with me on this, kindly get back to me with your interest for more details on my direct private contact.Best Regards, Luis Carlos Delgado Esq.(LCD ABOGADOS) Av. de Burgos 20, 28036 Madrid EspanaRua Sarmento de Beires 30 1�E, 1900-221 Lisboa PortugalTel: +351920414587Fax: +34917692994E-mail: Luis_carlos.delgado(a)consultant.co

7 years

1
0
0 0

Applied "ASoC: wm9712: fix replace codec to component" to the asoc tree

by Mark Brown

The patch ASoC: wm9712: fix replace codec to component has been applied to the asoc tree at https://git.kernel.org/pub/scm/linux/kernel/git/broonie/sound.git All being well this means that it will be integrated into the linux-next tree (usually sometime in the next 24 hours) and sent to Linus during the next merge window (or sooner if it is a bug fix), however if problems are discovered then the patch may be dropped or reverted. You may get further e-mails resulting from automated or manual testing and review of the tree, please engage with people reporting problems and send followup patches addressing any issues that are reported if needed. If any updates are required or you are submitting further changes they should be sent as incremental updates against current git, existing patches will not be replaced. Please add any relevant lists and maintainers to the CCs when replying to this mail. Thanks, Mark >From 5e4cfadaf5b73a0801b2fa7fb007f98400ebfe6e Mon Sep 17 00:00:00 2001 From: Marcel Ziswiler <marcel.ziswiler(a)toradex.com> Date: Tue, 14 Aug 2018 00:35:56 +0200 Subject: [PATCH] ASoC: wm9712: fix replace codec to component Since commit 143b44845d87 ("ASoC: wm9712: replace codec to component") "wm9712-codec" got renamed to "wm9712-component", however, this change never got propagated down to the actual board/platform drivers. E.g. on Colibri T20 this lead to the following spew upon boot with sound/touch being broken: [ 2.214121] tegra-snd-wm9712 sound: ASoC: CODEC DAI wm9712-hifi not registered [ 2.222137] tegra-snd-wm9712 sound: snd_soc_register_card failed (-517) ... [ 2.344384] tegra-snd-wm9712 sound: ASoC: CODEC DAI wm9712-hifi not registered [ 2.351885] tegra-snd-wm9712 sound: snd_soc_register_card failed (-517) ... [ 2.668339] tegra-snd-wm9712 sound: ASoC: CODEC DAI wm9712-hifi not registered [ 2.675811] tegra-snd-wm9712 sound: snd_soc_register_card failed (-517) ... [ 3.208408] tegra-snd-wm9712 sound: ASoC: CODEC DAI wm9712-hifi not registered [ 3.216312] tegra-snd-wm9712 sound: snd_soc_register_card failed (-517) ... [ 3.235397] tegra-snd-wm9712 sound: ASoC: CODEC DAI wm9712-hifi not registered [ 3.248938] tegra-snd-wm9712 sound: snd_soc_register_card failed (-517) ... [ 14.970443] ALSA device list: [ 14.996628] No soundcards found. This commit finally fixes this again. Signed-off-by: Marcel Ziswiler <marcel.ziswiler(a)toradex.com> Acked-by: Charles Keepax <ckeepax(a)opensource.cirrus.com> Signed-off-by: Mark Brown <broonie(a)kernel.org> Cc: stable(a)vger.kernel.org --- sound/soc/codecs/wm9712.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/sound/soc/codecs/wm9712.c b/sound/soc/codecs/wm9712.c index 953d94d50586..ade34c26ad2f 100644 --- a/sound/soc/codecs/wm9712.c +++ b/sound/soc/codecs/wm9712.c @@ -719,7 +719,7 @@ static int wm9712_probe(struct platform_device *pdev) static struct platform_driver wm9712_component_driver = { .driver = { - .name = "wm9712-component", + .name = "wm9712-codec", }, .probe = wm9712_probe, -- 2.18.0

7 years

1
0
0 0

[PATCH] drm/i915: set DP Main Stream Attribute for color range on DDI platforms

by Jani Nikula

Since Haswell we have no color range indication either in the pipe or port registers for DP. Instead, there's a separate register for setting the DP Main Stream Attributes (MSA) directly. The MSA register definition makes no references to colorimetry, just a vague reference to the DP spec. The connection to the color range was lost. Apparently we've failed to set the proper MSA bit for limited, or CEA, range ever since the first DDI platforms. We've started setting other MSA parameters since commit dae847991a43 ("drm/i915: add intel_ddi_set_pipe_settings"). Without the crucial bit of information, the DP sink has no way of knowing the source is actually transmitting limited range RGB, leading to "washed out" colors. With the colorimetry information, compliant sinks should be able to handle the limited range properly. Native (i.e. non-LSPCON) HDMI was not affected because we do pass the color range via AVI infoframes. Though not the root cause, the problem was made worse for DDI platforms with commit 55bc60db5988 ("drm/i915: Add "Automatic" mode for the "Broadcast RGB" property"), which selects limited range RGB automatically based on the mode, as per the DP, HDMI and CEA specs. After all these years, the fix boils down to flipping one bit. [Per testing reports, this fixes DP sinks, but not the LSPCON. My educated guess is that the LSPCON fails to turn the CEA range MSA into AVI infoframes for HDMI.] Reported-by: Michał Kopeć <mkopec12(a)gmail.com> Reported-by: N. W. <nw9165-3201(a)yahoo.com> Reported-by: Nicholas Stommel <nicholas.stommel(a)gmail.com> Reported-by: Tom Yan <tom.ty89(a)gmail.com> Tested-by: Nicholas Stommel <nicholas.stommel(a)gmail.com> References: https://bugs.freedesktop.org/show_bug.cgi?id=100023 Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=107476 Bugzilla: https://bugzilla.kernel.org/show_bug.cgi?id=94921 Cc: Paulo Zanoni <paulo.r.zanoni(a)intel.com> Cc: Rodrigo Vivi <rodrigo.vivi(a)intel.com> Cc: Ville Syrjälä <ville.syrjala(a)linux.intel.com> Cc: <stable(a)vger.kernel.org> # v3.9+ Signed-off-by: Jani Nikula <jani.nikula(a)intel.com> --- drivers/gpu/drm/i915/i915_reg.h | 1 + drivers/gpu/drm/i915/intel_ddi.c | 4 ++++ 2 files changed, 5 insertions(+) diff --git a/drivers/gpu/drm/i915/i915_reg.h b/drivers/gpu/drm/i915/i915_reg.h index 17575cfc22b5..0c9f03dda569 100644 --- a/drivers/gpu/drm/i915/i915_reg.h +++ b/drivers/gpu/drm/i915/i915_reg.h @@ -9246,6 +9246,7 @@ enum skl_power_gate { #define TRANS_MSA_10_BPC (2 << 5) #define TRANS_MSA_12_BPC (3 << 5) #define TRANS_MSA_16_BPC (4 << 5) +#define TRANS_MSA_CEA_RANGE (1 << 3) /* LCPLL Control */ #define LCPLL_CTL _MMIO(0x130040) diff --git a/drivers/gpu/drm/i915/intel_ddi.c b/drivers/gpu/drm/i915/intel_ddi.c index 0adc043529f2..6f7be066c8f2 100644 --- a/drivers/gpu/drm/i915/intel_ddi.c +++ b/drivers/gpu/drm/i915/intel_ddi.c @@ -1685,6 +1685,10 @@ void intel_ddi_set_pipe_settings(const struct intel_crtc_state *crtc_state) WARN_ON(transcoder_is_dsi(cpu_transcoder)); temp = TRANS_MSA_SYNC_CLK; + + if (crtc_state->limited_color_range) + temp |= TRANS_MSA_CEA_RANGE; + switch (crtc_state->pipe_bpp) { case 18: temp |= TRANS_MSA_6_BPC; -- 2.11.0

7 years

2
1
0 0

[Regression] usb: xhci: Add XHCI_TRUST_TX_LENGTH for Renesas uPD720201

by Joseph Salisbury

Hi Daniel, A kernel bug report was opened against Ubuntu [0]. It was found the following patch introduced the regression: da9970668948 ("usb: xhci: Add XHCI_TRUST_TX_LENGTH for Renesas uPD720201") The bug reporter claims there is a typo in the patch that caused the regression. I built a test kernel with a change to the suspected typo and the bug reporter claims it resolved the regression. My test kernel had the following change: - pdev->device == 0x0014) + pdev->device == 0x0015) I was hoping to get your feedback, since you are the patch author. Do you think this is an actual typo, or maybe there really needs to be two quirks? Thanks, Joe [0] http://pad.lv/1773704

7 years

2
1
0 0

AW:

by info＠adtop-ch.net

Guten Tag, nach unserem Besuch Ihrer Homepage möchten wir Ihnen ein Angebot von Produkten vorstellen, das Ihnen ermöglichen wird, den Verkauf Ihrer Produkte sowie Dienstleistungen deutlich zu erhöhen. Ich biete Ihnen den ganz neuen Adressenkatalog der Österreicher Unternehmen an, in dem sich direkte Kontaktdaten der Firmeninhaber und Manager befinden. Die Firmenangaben beinhalten: Firmennamen, Adresse des Hauptsitzes (Straße und Hausnummer, Postleitzahl, Ort, Region), E-Mail-Adresse, Telefonnummer, Faxnummer. http://www.dbc-at.net/?page=catalog *** 1. AT 2018 ( 104 000 ) - 149 EUR ( bis zum 14.08.2018 ) *** Die Verwendungsmöglichkeiten der Datenbanken sind praktisch unbegrenzt und Sie können durch Verwendung der von uns entwickelten Programme des personalisierten Versendens von Angeboten u.ä. mittels E-mailing bzw. Fax effektive und sichere Werbekampagnen damit durchführen. Bitte informieren Sie sich über die weiteren Details einmal unverbindlich auf unseren Webseite: http://www.dbc-at.net/?page=catalog MfG Martin Weber GC-Team.

7 years

1
0
0 0

[PATCH v7 3/5] drm/nouveau: Fix deadlock with fb_helper with async RPM requests

by Lyude Paul

I'm sure I don't need to tell you that fb_helper's locking is a mess. That being said; fb_helper's locking mess can seriously complicate the runtime suspend/resume operations of drivers because it can invoke atomic commits and connector probing from anywhere that calls drm_fb_helper_hotplug_event(). Since most drivers use drm_fb_helper_output_poll_changed() as their output_poll_changed handler, this can happen in every single context that can fire off a hotplug event. An example: [ 246.669625] INFO: task kworker/4:0:37 blocked for more than 120 seconds. [ 246.673398] Not tainted 4.18.0-rc5Lyude-Test+ #2 [ 246.675271] "echo 0 > /proc/sys/kernel/hung_task_timeout_secs" disables this message. [ 246.676527] kworker/4:0 D 0 37 2 0x80000000 [ 246.677580] Workqueue: events output_poll_execute [drm_kms_helper] [ 246.678704] Call Trace: [ 246.679753] __schedule+0x322/0xaf0 [ 246.680916] schedule+0x33/0x90 [ 246.681924] schedule_preempt_disabled+0x15/0x20 [ 246.683023] __mutex_lock+0x569/0x9a0 [ 246.684035] ? kobject_uevent_env+0x117/0x7b0 [ 246.685132] ? drm_fb_helper_hotplug_event.part.28+0x20/0xb0 [drm_kms_helper] [ 246.686179] mutex_lock_nested+0x1b/0x20 [ 246.687278] ? mutex_lock_nested+0x1b/0x20 [ 246.688307] drm_fb_helper_hotplug_event.part.28+0x20/0xb0 [drm_kms_helper] [ 246.689420] drm_fb_helper_output_poll_changed+0x23/0x30 [drm_kms_helper] [ 246.690462] drm_kms_helper_hotplug_event+0x2a/0x30 [drm_kms_helper] [ 246.691570] output_poll_execute+0x198/0x1c0 [drm_kms_helper] [ 246.692611] process_one_work+0x231/0x620 [ 246.693725] worker_thread+0x214/0x3a0 [ 246.694756] kthread+0x12b/0x150 [ 246.695856] ? wq_pool_ids_show+0x140/0x140 [ 246.696888] ? kthread_create_worker_on_cpu+0x70/0x70 [ 246.697998] ret_from_fork+0x3a/0x50 [ 246.699034] INFO: task kworker/0:1:60 blocked for more than 120 seconds. [ 246.700153] Not tainted 4.18.0-rc5Lyude-Test+ #2 [ 246.701182] "echo 0 > /proc/sys/kernel/hung_task_timeout_secs" disables this message. [ 246.702278] kworker/0:1 D 0 60 2 0x80000000 [ 246.703293] Workqueue: pm pm_runtime_work [ 246.704393] Call Trace: [ 246.705403] __schedule+0x322/0xaf0 [ 246.706439] ? wait_for_completion+0x104/0x190 [ 246.707393] schedule+0x33/0x90 [ 246.708375] schedule_timeout+0x3a5/0x590 [ 246.709289] ? mark_held_locks+0x58/0x80 [ 246.710208] ? _raw_spin_unlock_irq+0x2c/0x40 [ 246.711222] ? wait_for_completion+0x104/0x190 [ 246.712134] ? trace_hardirqs_on_caller+0xf4/0x190 [ 246.713094] ? wait_for_completion+0x104/0x190 [ 246.713964] wait_for_completion+0x12c/0x190 [ 246.714895] ? wake_up_q+0x80/0x80 [ 246.715727] ? get_work_pool+0x90/0x90 [ 246.716649] flush_work+0x1c9/0x280 [ 246.717483] ? flush_workqueue_prep_pwqs+0x1b0/0x1b0 [ 246.718442] __cancel_work_timer+0x146/0x1d0 [ 246.719247] cancel_delayed_work_sync+0x13/0x20 [ 246.720043] drm_kms_helper_poll_disable+0x1f/0x30 [drm_kms_helper] [ 246.721123] nouveau_pmops_runtime_suspend+0x3d/0xb0 [nouveau] [ 246.721897] pci_pm_runtime_suspend+0x6b/0x190 [ 246.722825] ? pci_has_legacy_pm_support+0x70/0x70 [ 246.723737] __rpm_callback+0x7a/0x1d0 [ 246.724721] ? pci_has_legacy_pm_support+0x70/0x70 [ 246.725607] rpm_callback+0x24/0x80 [ 246.726553] ? pci_has_legacy_pm_support+0x70/0x70 [ 246.727376] rpm_suspend+0x142/0x6b0 [ 246.728185] pm_runtime_work+0x97/0xc0 [ 246.728938] process_one_work+0x231/0x620 [ 246.729796] worker_thread+0x44/0x3a0 [ 246.730614] kthread+0x12b/0x150 [ 246.731395] ? wq_pool_ids_show+0x140/0x140 [ 246.732202] ? kthread_create_worker_on_cpu+0x70/0x70 [ 246.732878] ret_from_fork+0x3a/0x50 [ 246.733768] INFO: task kworker/4:2:422 blocked for more than 120 seconds. [ 246.734587] Not tainted 4.18.0-rc5Lyude-Test+ #2 [ 246.735393] "echo 0 > /proc/sys/kernel/hung_task_timeout_secs" disables this message. [ 246.736113] kworker/4:2 D 0 422 2 0x80000080 [ 246.736789] Workqueue: events_long drm_dp_mst_link_probe_work [drm_kms_helper] [ 246.737665] Call Trace: [ 246.738490] __schedule+0x322/0xaf0 [ 246.739250] schedule+0x33/0x90 [ 246.739908] rpm_resume+0x19c/0x850 [ 246.740750] ? finish_wait+0x90/0x90 [ 246.741541] __pm_runtime_resume+0x4e/0x90 [ 246.742370] nv50_disp_atomic_commit+0x31/0x210 [nouveau] [ 246.743124] drm_atomic_commit+0x4a/0x50 [drm] [ 246.743775] restore_fbdev_mode_atomic+0x1c8/0x240 [drm_kms_helper] [ 246.744603] restore_fbdev_mode+0x31/0x140 [drm_kms_helper] [ 246.745373] drm_fb_helper_restore_fbdev_mode_unlocked+0x54/0xb0 [drm_kms_helper] [ 246.746220] drm_fb_helper_set_par+0x2d/0x50 [drm_kms_helper] [ 246.746884] drm_fb_helper_hotplug_event.part.28+0x96/0xb0 [drm_kms_helper] [ 246.747675] drm_fb_helper_output_poll_changed+0x23/0x30 [drm_kms_helper] [ 246.748544] drm_kms_helper_hotplug_event+0x2a/0x30 [drm_kms_helper] [ 246.749439] nv50_mstm_hotplug+0x15/0x20 [nouveau] [ 246.750111] drm_dp_send_link_address+0x177/0x1c0 [drm_kms_helper] [ 246.750764] drm_dp_check_and_send_link_address+0xa8/0xd0 [drm_kms_helper] [ 246.751602] drm_dp_mst_link_probe_work+0x51/0x90 [drm_kms_helper] [ 246.752314] process_one_work+0x231/0x620 [ 246.752979] worker_thread+0x44/0x3a0 [ 246.753838] kthread+0x12b/0x150 [ 246.754619] ? wq_pool_ids_show+0x140/0x140 [ 246.755386] ? kthread_create_worker_on_cpu+0x70/0x70 [ 246.756162] ret_from_fork+0x3a/0x50 [ 246.756847] Showing all locks held in the system: [ 246.758261] 3 locks held by kworker/4:0/37: [ 246.759016] #0: 00000000f8df4d2d ((wq_completion)"events"){+.+.}, at: process_one_work+0x1b3/0x620 [ 246.759856] #1: 00000000e6065461 ((work_completion)(&(&dev->mode_config.output_poll_work)->work)){+.+.}, at: process_one_work+0x1b3/0x620 [ 246.760670] #2: 00000000cb66735f (&helper->lock){+.+.}, at: drm_fb_helper_hotplug_event.part.28+0x20/0xb0 [drm_kms_helper] [ 246.761516] 2 locks held by kworker/0:1/60: [ 246.762274] #0: 00000000fff6be0f ((wq_completion)"pm"){+.+.}, at: process_one_work+0x1b3/0x620 [ 246.762982] #1: 000000005ab44fb4 ((work_completion)(&dev->power.work)){+.+.}, at: process_one_work+0x1b3/0x620 [ 246.763890] 1 lock held by khungtaskd/64: [ 246.764664] #0: 000000008cb8b5c3 (rcu_read_lock){....}, at: debug_show_all_locks+0x23/0x185 [ 246.765588] 5 locks held by kworker/4:2/422: [ 246.766440] #0: 00000000232f0959 ((wq_completion)"events_long"){+.+.}, at: process_one_work+0x1b3/0x620 [ 246.767390] #1: 00000000bb59b134 ((work_completion)(&mgr->work)){+.+.}, at: process_one_work+0x1b3/0x620 [ 246.768154] #2: 00000000cb66735f (&helper->lock){+.+.}, at: drm_fb_helper_restore_fbdev_mode_unlocked+0x4c/0xb0 [drm_kms_helper] [ 246.768966] #3: 000000004c8f0b6b (crtc_ww_class_acquire){+.+.}, at: restore_fbdev_mode_atomic+0x4b/0x240 [drm_kms_helper] [ 246.769921] #4: 000000004c34a296 (crtc_ww_class_mutex){+.+.}, at: drm_modeset_backoff+0x8a/0x1b0 [drm] [ 246.770839] 1 lock held by dmesg/1038: [ 246.771739] 2 locks held by zsh/1172: [ 246.772650] #0: 00000000836d0438 (&tty->ldisc_sem){++++}, at: ldsem_down_read+0x37/0x40 [ 246.773680] #1: 000000001f4f4d48 (&ldata->atomic_read_lock){+.+.}, at: n_tty_read+0xc1/0x870 [ 246.775522] ============================================= After trying dozens of different solutions, I found one very simple one that should also have the benefit of preventing us from having to fight locking for the rest of our lives. So, we work around these deadlocks by deferring all fbcon hotplug events that happen after the runtime suspend process starts until after the device is resumed again. Changes since v6: - Remove unused nouveau_fbcon_hotplugged_in_suspend() - Ilia Changes since v5: - Come up with the (hopefully final) solution for solving this dumb problem, one that is a lot less likely to cause issues with locking in the future. This should work around all deadlock conditions with fbcon brought up thus far. Changes since v4: - Add nouveau_fbcon_hotplugged_in_suspend() to workaround deadlock condition that Lukas described - Just move all of this out of drm_fb_helper. It seems that other DRM drivers have already figured out other workarounds for this. If other drivers do end up needing this in the future, we can just move this back into drm_fb_helper again. Changes since v3: - Actually check if fb_helper is NULL in both new helpers - Actually check drm_fbdev_emulation in both new helpers - Don't fire off a fb_helper hotplug unconditionally; only do it if the following conditions are true (as otherwise, calling this in the wrong spot will cause Bad Things to happen): - fb_helper hotplug handling was actually inhibited previously - fb_helper actually has a delayed hotplug pending - fb_helper is actually bound - fb_helper is actually initialized - Add __must_check to drm_fb_helper_suspend_hotplug(). There's no situation where a driver would actually want to use this without checking the return value, so enforce that - Rewrite and clarify the documentation for both helpers. - Make sure to return true in the drm_fb_helper_suspend_hotplug() stub that's provided in drm_fb_helper.h when CONFIG_DRM_FBDEV_EMULATION isn't enabled - Actually grab the toplevel fb_helper lock in drm_fb_helper_resume_hotplug(), since it's possible other activity (such as a hotplug) could be going on at the same time the driver calls drm_fb_helper_resume_hotplug(). We need this to check whether or not drm_fb_helper_hotplug_event() needs to be called anyway Signed-off-by: Lyude Paul <lyude(a)redhat.com> Cc: stable(a)vger.kernel.org Cc: Lukas Wunner <lukas(a)wunner.de> Cc: Karol Herbst <karolherbst(a)gmail.com> --- drivers/gpu/drm/nouveau/dispnv50/disp.c | 2 +- drivers/gpu/drm/nouveau/nouveau_display.c | 2 +- drivers/gpu/drm/nouveau/nouveau_fbcon.c | 57 +++++++++++++++++++++++ drivers/gpu/drm/nouveau/nouveau_fbcon.h | 5 ++ 4 files changed, 64 insertions(+), 2 deletions(-) diff --git a/drivers/gpu/drm/nouveau/dispnv50/disp.c b/drivers/gpu/drm/nouveau/dispnv50/disp.c index 8b522a9b12f6..a0772389ed90 100644 --- a/drivers/gpu/drm/nouveau/dispnv50/disp.c +++ b/drivers/gpu/drm/nouveau/dispnv50/disp.c @@ -2049,7 +2049,7 @@ nv50_disp_atomic_state_alloc(struct drm_device *dev) static const struct drm_mode_config_funcs nv50_disp_func = { .fb_create = nouveau_user_framebuffer_create, - .output_poll_changed = drm_fb_helper_output_poll_changed, + .output_poll_changed = nouveau_fbcon_output_poll_changed, .atomic_check = nv50_disp_atomic_check, .atomic_commit = nv50_disp_atomic_commit, .atomic_state_alloc = nv50_disp_atomic_state_alloc, diff --git a/drivers/gpu/drm/nouveau/nouveau_display.c b/drivers/gpu/drm/nouveau/nouveau_display.c index 1d36ab5d4796..4b873e668b26 100644 --- a/drivers/gpu/drm/nouveau/nouveau_display.c +++ b/drivers/gpu/drm/nouveau/nouveau_display.c @@ -293,7 +293,7 @@ nouveau_user_framebuffer_create(struct drm_device *dev, static const struct drm_mode_config_funcs nouveau_mode_config_funcs = { .fb_create = nouveau_user_framebuffer_create, - .output_poll_changed = drm_fb_helper_output_poll_changed, + .output_poll_changed = nouveau_fbcon_output_poll_changed, }; diff --git a/drivers/gpu/drm/nouveau/nouveau_fbcon.c b/drivers/gpu/drm/nouveau/nouveau_fbcon.c index 85c1f10bc2b6..8cf966690963 100644 --- a/drivers/gpu/drm/nouveau/nouveau_fbcon.c +++ b/drivers/gpu/drm/nouveau/nouveau_fbcon.c @@ -466,6 +466,7 @@ nouveau_fbcon_set_suspend_work(struct work_struct *work) console_unlock(); if (state == FBINFO_STATE_RUNNING) { + nouveau_fbcon_hotplug_resume(drm->fbcon); pm_runtime_mark_last_busy(drm->dev->dev); pm_runtime_put_sync(drm->dev->dev); } @@ -487,6 +488,61 @@ nouveau_fbcon_set_suspend(struct drm_device *dev, int state) schedule_work(&drm->fbcon_work); } +void +nouveau_fbcon_output_poll_changed(struct drm_device *dev) +{ + struct nouveau_drm *drm = nouveau_drm(dev); + struct nouveau_fbdev *fbcon = drm->fbcon; + int ret; + + if (!fbcon) + return; + + mutex_lock(&fbcon->hotplug_lock); + + ret = pm_runtime_get(dev->dev); + if (ret == 1 || ret == -EACCES) { + drm_fb_helper_hotplug_event(&fbcon->helper); + + pm_runtime_mark_last_busy(dev->dev); + pm_runtime_put_autosuspend(dev->dev); + } else if (ret == 0) { + /* If the GPU was already in the process of suspending before + * this event happened, then we can't block here as we'll + * deadlock the runtime pmops since they wait for us to + * finish. So, just defer this event for when we runtime + * resume again. It will be handled by fbcon_work. + */ + NV_DEBUG(drm, "fbcon HPD event deferred until runtime resume\n"); + fbcon->hotplug_waiting = true; + pm_runtime_put_noidle(drm->dev->dev); + } else { + DRM_WARN("fbcon HPD event lost due to RPM failure: %d\n", + ret); + } + + mutex_unlock(&fbcon->hotplug_lock); +} + +void +nouveau_fbcon_hotplug_resume(struct nouveau_fbdev *fbcon) +{ + struct nouveau_drm *drm; + + if (!fbcon) + return; + drm = nouveau_drm(fbcon->helper.dev); + + mutex_lock(&fbcon->hotplug_lock); + if (fbcon->hotplug_waiting) { + fbcon->hotplug_waiting = false; + + NV_DEBUG(drm, "Handling deferred fbcon HPD events\n"); + drm_fb_helper_hotplug_event(&fbcon->helper); + } + mutex_unlock(&fbcon->hotplug_lock); +} + int nouveau_fbcon_init(struct drm_device *dev) { @@ -505,6 +561,7 @@ nouveau_fbcon_init(struct drm_device *dev) drm->fbcon = fbcon; INIT_WORK(&drm->fbcon_work, nouveau_fbcon_set_suspend_work); + mutex_init(&fbcon->hotplug_lock); drm_fb_helper_prepare(dev, &fbcon->helper, &nouveau_fbcon_helper_funcs); diff --git a/drivers/gpu/drm/nouveau/nouveau_fbcon.h b/drivers/gpu/drm/nouveau/nouveau_fbcon.h index a6f192ea3fa6..db9d52047ef8 100644 --- a/drivers/gpu/drm/nouveau/nouveau_fbcon.h +++ b/drivers/gpu/drm/nouveau/nouveau_fbcon.h @@ -41,6 +41,9 @@ struct nouveau_fbdev { struct nvif_object gdi; struct nvif_object blit; struct nvif_object twod; + + struct mutex hotplug_lock; + bool hotplug_waiting; }; void nouveau_fbcon_restore(void); @@ -68,6 +71,8 @@ void nouveau_fbcon_set_suspend(struct drm_device *dev, int state); void nouveau_fbcon_accel_save_disable(struct drm_device *dev); void nouveau_fbcon_accel_restore(struct drm_device *dev); +void nouveau_fbcon_output_poll_changed(struct drm_device *dev); +void nouveau_fbcon_hotplug_resume(struct nouveau_fbdev *fbcon); extern int nouveau_nofbaccel; #endif /* __NV50_FBCON_H__ */ -- 2.17.1

7 years

2
2
0 0

[PATCH v2] mm: migration: fix migration of huge PMD shared pages

by Mike Kravetz

The page migration code employs try_to_unmap() to try and unmap the source page. This is accomplished by using rmap_walk to find all vmas where the page is mapped. This search stops when page mapcount is zero. For shared PMD huge pages, the page map count is always 1 no matter the number of mappings. Shared mappings are tracked via the reference count of the PMD page. Therefore, try_to_unmap stops prematurely and does not completely unmap all mappings of the source page. This problem can result is data corruption as writes to the original source page can happen after contents of the page are copied to the target page. Hence, data is lost. This problem was originally seen as DB corruption of shared global areas after a huge page was soft offlined due to ECC memory errors. DB developers noticed they could reproduce the issue by (hotplug) offlining memory used to back huge pages. A simple testcase can reproduce the problem by creating a shared PMD mapping (note that this must be at least PUD_SIZE in size and PUD_SIZE aligned (1GB on x86)), and using migrate_pages() to migrate process pages between nodes while continually writing to the huge pages being migrated. To fix, have the try_to_unmap_one routine check for huge PMD sharing by calling huge_pmd_unshare for hugetlbfs huge pages. If it is a shared mapping it will be 'unshared' which removes the page table entry and drops the reference on the PMD page. After this, flush caches and TLB. Fixes: 39dde65c9940 ("shared page table for hugetlb page") Signed-off-by: Mike Kravetz <mike.kravetz(a)oracle.com> --- v2: Fixed build issue for !CONFIG_HUGETLB_PAGE and typos in comment include/linux/hugetlb.h | 6 ++++++ mm/rmap.c | 21 +++++++++++++++++++++ 2 files changed, 27 insertions(+) diff --git a/include/linux/hugetlb.h b/include/linux/hugetlb.h index 36fa6a2a82e3..7524663028ec 100644 --- a/include/linux/hugetlb.h +++ b/include/linux/hugetlb.h @@ -170,6 +170,12 @@ static inline unsigned long hugetlb_total_pages(void) return 0; } +static inline int huge_pmd_unshare(struct mm_struct *mm, unsigned long *addr, + pte_t *ptep) +{ + return 0; +} + #define follow_hugetlb_page(m,v,p,vs,a,b,i,w,n) ({ BUG(); 0; }) #define follow_huge_addr(mm, addr, write) ERR_PTR(-EINVAL) #define copy_hugetlb_page_range(src, dst, vma) ({ BUG(); 0; }) diff --git a/mm/rmap.c b/mm/rmap.c index 09a799c9aebd..cf2340adad10 100644 --- a/mm/rmap.c +++ b/mm/rmap.c @@ -1409,6 +1409,27 @@ static bool try_to_unmap_one(struct page *page, struct vm_area_struct *vma, subpage = page - page_to_pfn(page) + pte_pfn(*pvmw.pte); address = pvmw.address; + /* + * PMDs for hugetlbfs pages could be shared. In this case, + * pages with shared PMDs will have a mapcount of 1 no matter + * how many times they are actually mapped. Map counting for + * PMD sharing is mostly done via the reference count on the + * PMD page itself. If the page we are trying to unmap is a + * hugetlbfs page, attempt to 'unshare' at the PMD level. + * huge_pmd_unshare clears the PUD and adjusts reference + * counting on the PMD page which effectively unmaps the page. + * Take care of flushing cache and TLB for page in this + * specific mapping here. + */ + if (PageHuge(page) && + huge_pmd_unshare(mm, &address, pvmw.pte)) { + unsigned long end_add = address + vma_mmu_pagesize(vma); + + flush_cache_range(vma, address, end_add); + flush_tlb_range(vma, address, end_add); + mmu_notifier_invalidate_range(mm, address, end_add); + continue; + } if (IS_ENABLED(CONFIG_MIGRATION) && (flags & TTU_MIGRATION) && -- 2.17.1

7 years

2
1
0 0

[PATCH 4/4] nvme-pci: Remap CMB SQ entries on every controller reset

by Gavin Shan

The controller memory buffer is remapped into a kernel address on each reset, but the driver was setting the submission queue base address only on the very first queue creation. The remapped address is likely to change after a reset, so accessing the old address will hit a kernel bug. This patch fixes that by setting the queue's CMB base address each time the queue is created. Cherry-pick from upstream commit 815c6704bf9f ("nvme-pci: Remap CMB SQ entries on every controller reset") Fixes: f63572dff1421 ("nvme: unmap CMB and remove sysfs file in reset path") Reported-by: Christian Black <christian.d.black(a)intel.com> Cc: Jon Derrick <jonathan.derrick(a)intel.com> Cc: <stable(a)vger.kernel.org> # 4.9+ Signed-off-by: Keith Busch <keith.busch(a)intel.com> Reviewed-by: Christoph Hellwig <hch(a)lst.de> Signed-off-by: Gavin Shan <shan.gavin(a)linux.alibaba.com> --- drivers/nvme/host/pci.c | 29 +++++++++++++++++------------ 1 file changed, 17 insertions(+), 12 deletions(-) diff --git a/drivers/nvme/host/pci.c b/drivers/nvme/host/pci.c index 52d540f089e0..84fb47c4ad5c 100644 --- a/drivers/nvme/host/pci.c +++ b/drivers/nvme/host/pci.c @@ -1174,18 +1174,16 @@ static int nvme_alloc_sq_cmds(struct nvme_dev *dev, struct nvme_queue *nvmeq, int sq_idx, int depth) { int qid = nvmeq->sq[sq_idx].id; - if (qid && dev->cmb && use_cmb_sqes && (dev->cmbsz & NVME_CMBSZ_SQS)) { - unsigned offset = (qid - 1) * roundup(SQ_SIZE(depth), - dev->ctrl.page_size); - nvmeq->sq[sq_idx].sq_dma_addr = dev->cmb_bus_addr + offset; - nvmeq->sq[sq_idx].sq_cmds_io = dev->cmb + offset; - } else { - nvmeq->sq[sq_idx].sq_cmds = dma_alloc_coherent(dev->dev, - SQ_SIZE(depth), - &nvmeq->sq[sq_idx].sq_dma_addr, GFP_KERNEL); - if (!nvmeq->sq[sq_idx].sq_cmds) - return -ENOMEM; - } + + /* CMB SQEs will be mapped before creation */ + if (qid && dev->cmb && use_cmb_sqes && (dev->cmbsz & NVME_CMBSZ_SQS)) + return 0; + + nvmeq->sq[sq_idx].sq_cmds = dma_alloc_coherent(dev->dev, SQ_SIZE(depth), + &nvmeq->sq[sq_idx].sq_dma_addr, + GFP_KERNEL); + if (!nvmeq->sq[sq_idx].sq_cmds) + return -ENOMEM; return 0; } @@ -1280,6 +1278,13 @@ static int nvme_create_queue(struct nvme_queue *nvmeq, int qid) struct nvme_dev *dev = nvmeq->dev; int result, i; + if (dev->cmb && use_cmb_sqes && (dev->cmbsz & NVME_CMBSZ_SQS)) { + unsigned offset = (qid - 1) * roundup(SQ_SIZE(nvmeq->q_depth), + dev->ctrl.page_size); + nvmeq->sq[0].sq_dma_addr = dev->cmb_bus_addr + offset; + nvmeq->sq[0].sq_cmds_io = dev->cmb + offset; + } + nvmeq->cq_vector = qid - 1; result = adapter_alloc_cq(dev, nvmeq->cq_id, nvmeq); if (result < 0) -- 2.11.0

7 years

3
2
0 0

RE: [PATCH 05/11] ACPICA: AML Parser: skip opcodes that open a scope upon parse failure

by Schmauss, Erik

> -----Original Message----- > From: Rafael J. Wysocki [mailto:rafael@kernel.org] > Sent: Sunday, August 12, 2018 2:47 AM > To: Schmauss, Erik <erik.schmauss(a)intel.com> > Cc: ACPI Devel Maling List <linux-acpi(a)vger.kernel.org>; Rafael J. Wysocki > <rjw(a)rjwysocki.net> > Subject: Re: [PATCH 05/11] ACPICA: AML Parser: skip opcodes that open a scope > upon parse failure > > On Fri, Aug 10, 2018 at 11:45 PM Erik Schmauss <erik.schmauss(a)intel.com> > wrote: > > > > This change skips the entire length of opcodes that open a scope > > (Device, Scope, Processor, etc) if the creation of the op fails. The > > failure could be caused by various errors including AE_ALREADY_EXISTS > > and AE_NOT_FOUND. > > > > Reported-by: Jeremy Linton <jeremy.linton(a)arm.com> > > Tested-by: Jeremy Linton <jeremy.linton(a)arm.com> > > Signed-off-by: Erik Schmauss <erik.schmauss(a)intel.com> > > I think that we should propagate this fix to the "stable" kernel series, at least > 4.17.y and newer. Do you agree? Yes, I agree. Hi Greg, please add this to the stable kernel > > > --- > > drivers/acpi/acpica/psloop.c | 17 +++++++++++------ > > 1 file changed, 11 insertions(+), 6 deletions(-) > > > > diff --git a/drivers/acpi/acpica/psloop.c > > b/drivers/acpi/acpica/psloop.c index 20b6142da183..358fcdd1f8a5 100644 > > --- a/drivers/acpi/acpica/psloop.c > > +++ b/drivers/acpi/acpica/psloop.c > > @@ -22,6 +22,7 @@ > > #include "acdispat.h" > > #include "amlcode.h" > > #include "acconvert.h" > > +#include "acnamesp.h" > > > > #define _COMPONENT ACPI_PARSER > > ACPI_MODULE_NAME("psloop") > > @@ -527,12 +528,18 @@ acpi_status acpi_ps_parse_loop(struct > acpi_walk_state *walk_state) > > if (ACPI_FAILURE(status)) { > > return_ACPI_STATUS(status); > > } > > - if (walk_state->opcode == AML_SCOPE_OP) { > > + if (acpi_ns_opens_scope > > + (acpi_ps_get_opcode_info > > + > > + (walk_state->opcode)->object_type)) { > > /* > > - * If the scope op fails to parse, skip the body of the > > - * scope op because the parse failure indicates that the > > - * device may not exist. > > + * If the scope/device op fails to parse, skip the body of > > + * the scope op because the parse failure indicates that > > + * the device may not exist. > > */ > > + ACPI_ERROR((AE_INFO, > > + "Skip parsing opcode %s", > > + acpi_ps_get_opcode_name > > + > > + (walk_state->opcode))); > > walk_state->parser_state.aml = > > walk_state->aml + 1; > > walk_state->parser_state.aml = > > @@ -540,8 +547,6 @@ acpi_status acpi_ps_parse_loop(struct > acpi_walk_state *walk_state) > > (&walk_state->parser_state); > > walk_state->aml = > > walk_state->parser_state.aml; > > - ACPI_ERROR((AE_INFO, > > - "Skipping Scope block")); > > } > > > > continue; > > -- > > 2.17.1 > >

7 years

3
2
0 0

[PATCH v7 5/5] drm/nouveau: Fix deadlocks in nouveau_connector_detect()

by Lyude Paul

When we disable hotplugging on the GPU, we need to be able to synchronize with each connector's hotplug interrupt handler before the interrupt is finally disabled. This can be a problem however, since nouveau_connector_detect() currently grabs a runtime power reference when handling connector probing. This will deadlock the runtime suspend handler like so: [ 861.480896] INFO: task kworker/0:2:61 blocked for more than 120 seconds. [ 861.483290] Tainted: G O 4.18.0-rc6Lyude-Test+ #1 [ 861.485158] "echo 0 > /proc/sys/kernel/hung_task_timeout_secs" disables this message. [ 861.486332] kworker/0:2 D 0 61 2 0x80000000 [ 861.487044] Workqueue: events nouveau_display_hpd_work [nouveau] [ 861.487737] Call Trace: [ 861.488394] __schedule+0x322/0xaf0 [ 861.489070] schedule+0x33/0x90 [ 861.489744] rpm_resume+0x19c/0x850 [ 861.490392] ? finish_wait+0x90/0x90 [ 861.491068] __pm_runtime_resume+0x4e/0x90 [ 861.491753] nouveau_display_hpd_work+0x22/0x60 [nouveau] [ 861.492416] process_one_work+0x231/0x620 [ 861.493068] worker_thread+0x44/0x3a0 [ 861.493722] kthread+0x12b/0x150 [ 861.494342] ? wq_pool_ids_show+0x140/0x140 [ 861.494991] ? kthread_create_worker_on_cpu+0x70/0x70 [ 861.495648] ret_from_fork+0x3a/0x50 [ 861.496304] INFO: task kworker/6:2:320 blocked for more than 120 seconds. [ 861.496968] Tainted: G O 4.18.0-rc6Lyude-Test+ #1 [ 861.497654] "echo 0 > /proc/sys/kernel/hung_task_timeout_secs" disables this message. [ 861.498341] kworker/6:2 D 0 320 2 0x80000080 [ 861.499045] Workqueue: pm pm_runtime_work [ 861.499739] Call Trace: [ 861.500428] __schedule+0x322/0xaf0 [ 861.501134] ? wait_for_completion+0x104/0x190 [ 861.501851] schedule+0x33/0x90 [ 861.502564] schedule_timeout+0x3a5/0x590 [ 861.503284] ? mark_held_locks+0x58/0x80 [ 861.503988] ? _raw_spin_unlock_irq+0x2c/0x40 [ 861.504710] ? wait_for_completion+0x104/0x190 [ 861.505417] ? trace_hardirqs_on_caller+0xf4/0x190 [ 861.506136] ? wait_for_completion+0x104/0x190 [ 861.506845] wait_for_completion+0x12c/0x190 [ 861.507555] ? wake_up_q+0x80/0x80 [ 861.508268] flush_work+0x1c9/0x280 [ 861.508990] ? flush_workqueue_prep_pwqs+0x1b0/0x1b0 [ 861.509735] nvif_notify_put+0xb1/0xc0 [nouveau] [ 861.510482] nouveau_display_fini+0xbd/0x170 [nouveau] [ 861.511241] nouveau_display_suspend+0x67/0x120 [nouveau] [ 861.511969] nouveau_do_suspend+0x5e/0x2d0 [nouveau] [ 861.512715] nouveau_pmops_runtime_suspend+0x47/0xb0 [nouveau] [ 861.513435] pci_pm_runtime_suspend+0x6b/0x180 [ 861.514165] ? pci_has_legacy_pm_support+0x70/0x70 [ 861.514897] __rpm_callback+0x7a/0x1d0 [ 861.515618] ? pci_has_legacy_pm_support+0x70/0x70 [ 861.516313] rpm_callback+0x24/0x80 [ 861.517027] ? pci_has_legacy_pm_support+0x70/0x70 [ 861.517741] rpm_suspend+0x142/0x6b0 [ 861.518449] pm_runtime_work+0x97/0xc0 [ 861.519144] process_one_work+0x231/0x620 [ 861.519831] worker_thread+0x44/0x3a0 [ 861.520522] kthread+0x12b/0x150 [ 861.521220] ? wq_pool_ids_show+0x140/0x140 [ 861.521925] ? kthread_create_worker_on_cpu+0x70/0x70 [ 861.522622] ret_from_fork+0x3a/0x50 [ 861.523299] INFO: task kworker/6:0:1329 blocked for more than 120 seconds. [ 861.523977] Tainted: G O 4.18.0-rc6Lyude-Test+ #1 [ 861.524644] "echo 0 > /proc/sys/kernel/hung_task_timeout_secs" disables this message. [ 861.525349] kworker/6:0 D 0 1329 2 0x80000000 [ 861.526073] Workqueue: events nvif_notify_work [nouveau] [ 861.526751] Call Trace: [ 861.527411] __schedule+0x322/0xaf0 [ 861.528089] schedule+0x33/0x90 [ 861.528758] rpm_resume+0x19c/0x850 [ 861.529399] ? finish_wait+0x90/0x90 [ 861.530073] __pm_runtime_resume+0x4e/0x90 [ 861.530798] nouveau_connector_detect+0x7e/0x510 [nouveau] [ 861.531459] ? ww_mutex_lock+0x47/0x80 [ 861.532097] ? ww_mutex_lock+0x47/0x80 [ 861.532819] ? drm_modeset_lock+0x88/0x130 [drm] [ 861.533481] drm_helper_probe_detect_ctx+0xa0/0x100 [drm_kms_helper] [ 861.534127] drm_helper_hpd_irq_event+0xa4/0x120 [drm_kms_helper] [ 861.534940] nouveau_connector_hotplug+0x98/0x120 [nouveau] [ 861.535556] nvif_notify_work+0x2d/0xb0 [nouveau] [ 861.536221] process_one_work+0x231/0x620 [ 861.536994] worker_thread+0x44/0x3a0 [ 861.537757] kthread+0x12b/0x150 [ 861.538463] ? wq_pool_ids_show+0x140/0x140 [ 861.539102] ? kthread_create_worker_on_cpu+0x70/0x70 [ 861.539815] ret_from_fork+0x3a/0x50 [ 861.540521] Showing all locks held in the system: [ 861.541696] 2 locks held by kworker/0:2/61: [ 861.542406] #0: 000000002dbf8af5 ((wq_completion)"events"){+.+.}, at: process_one_work+0x1b3/0x620 [ 861.543071] #1: 0000000076868126 ((work_completion)(&drm->hpd_work)){+.+.}, at: process_one_work+0x1b3/0x620 [ 861.543814] 1 lock held by khungtaskd/64: [ 861.544535] #0: 0000000059db4b53 (rcu_read_lock){....}, at: debug_show_all_locks+0x23/0x185 [ 861.545160] 3 locks held by kworker/6:2/320: [ 861.545896] #0: 00000000d9e1bc59 ((wq_completion)"pm"){+.+.}, at: process_one_work+0x1b3/0x620 [ 861.546702] #1: 00000000c9f92d84 ((work_completion)(&dev->power.work)){+.+.}, at: process_one_work+0x1b3/0x620 [ 861.547443] #2: 000000004afc5de1 (drm_connector_list_iter){.+.+}, at: nouveau_display_fini+0x96/0x170 [nouveau] [ 861.548146] 1 lock held by dmesg/983: [ 861.548889] 2 locks held by zsh/1250: [ 861.549605] #0: 00000000348e3cf6 (&tty->ldisc_sem){++++}, at: ldsem_down_read+0x37/0x40 [ 861.550393] #1: 000000007009a7a8 (&ldata->atomic_read_lock){+.+.}, at: n_tty_read+0xc1/0x870 [ 861.551122] 6 locks held by kworker/6:0/1329: [ 861.551957] #0: 000000002dbf8af5 ((wq_completion)"events"){+.+.}, at: process_one_work+0x1b3/0x620 [ 861.552765] #1: 00000000ddb499ad ((work_completion)(&notify->work)#2){+.+.}, at: process_one_work+0x1b3/0x620 [ 861.553582] #2: 000000006e013cbe (&dev->mode_config.mutex){+.+.}, at: drm_helper_hpd_irq_event+0x6c/0x120 [drm_kms_helper] [ 861.554357] #3: 000000004afc5de1 (drm_connector_list_iter){.+.+}, at: drm_helper_hpd_irq_event+0x78/0x120 [drm_kms_helper] [ 861.555227] #4: 0000000044f294d9 (crtc_ww_class_acquire){+.+.}, at: drm_helper_probe_detect_ctx+0x3d/0x100 [drm_kms_helper] [ 861.556133] #5: 00000000db193642 (crtc_ww_class_mutex){+.+.}, at: drm_modeset_lock+0x4b/0x130 [drm] [ 861.557864] ============================================= [ 861.559507] NMI backtrace for cpu 2 [ 861.560363] CPU: 2 PID: 64 Comm: khungtaskd Tainted: G O 4.18.0-rc6Lyude-Test+ #1 [ 861.561197] Hardware name: LENOVO 20EQS64N0B/20EQS64N0B, BIOS N1EET78W (1.51 ) 05/18/2018 [ 861.561948] Call Trace: [ 861.562757] dump_stack+0x8e/0xd3 [ 861.563516] nmi_cpu_backtrace.cold.3+0x14/0x5a [ 861.564269] ? lapic_can_unplug_cpu.cold.27+0x42/0x42 [ 861.565029] nmi_trigger_cpumask_backtrace+0xa1/0xae [ 861.565789] arch_trigger_cpumask_backtrace+0x19/0x20 [ 861.566558] watchdog+0x316/0x580 [ 861.567355] kthread+0x12b/0x150 [ 861.568114] ? reset_hung_task_detector+0x20/0x20 [ 861.568863] ? kthread_create_worker_on_cpu+0x70/0x70 [ 861.569598] ret_from_fork+0x3a/0x50 [ 861.570370] Sending NMI from CPU 2 to CPUs 0-1,3-7: [ 861.571426] NMI backtrace for cpu 6 skipped: idling at intel_idle+0x7f/0x120 [ 861.571429] NMI backtrace for cpu 7 skipped: idling at intel_idle+0x7f/0x120 [ 861.571432] NMI backtrace for cpu 3 skipped: idling at intel_idle+0x7f/0x120 [ 861.571464] NMI backtrace for cpu 5 skipped: idling at intel_idle+0x7f/0x120 [ 861.571467] NMI backtrace for cpu 0 skipped: idling at intel_idle+0x7f/0x120 [ 861.571469] NMI backtrace for cpu 4 skipped: idling at intel_idle+0x7f/0x120 [ 861.571472] NMI backtrace for cpu 1 skipped: idling at intel_idle+0x7f/0x120 [ 861.572428] Kernel panic - not syncing: hung_task: blocked tasks So: fix this by making it so that normal hotplug handling /only/ happens so long as the GPU is currently awake without any pending runtime PM requests. In the event that a hotplug occurs while the device is suspending or resuming, we can simply defer our response until the GPU is fully runtime resumed again. Changes since v4: - Use a new trick I came up with using pm_runtime_get() instead of the hackish junk we had before Signed-off-by: Lyude Paul <lyude(a)redhat.com> Cc: stable(a)vger.kernel.org Cc: Lukas Wunner <lukas(a)wunner.de> Cc: Karol Herbst <karolherbst(a)gmail.com> --- drivers/gpu/drm/nouveau/nouveau_connector.c | 22 +++++++++++++++++++++ 1 file changed, 22 insertions(+) diff --git a/drivers/gpu/drm/nouveau/nouveau_connector.c b/drivers/gpu/drm/nouveau/nouveau_connector.c index 010d6db14cba..109240c03357 100644 --- a/drivers/gpu/drm/nouveau/nouveau_connector.c +++ b/drivers/gpu/drm/nouveau/nouveau_connector.c @@ -1124,6 +1124,26 @@ nouveau_connector_hotplug(struct nvif_notify *notify) const struct nvif_notify_conn_rep_v0 *rep = notify->data; const char *name = connector->name; struct nouveau_encoder *nv_encoder; + int ret; + + ret = pm_runtime_get(drm->dev->dev); + if (ret == 0) { + /* We can't block here if there's a pending PM request + * running, as we'll deadlock nouveau_display_fini() when it + * calls nvif_put() on our nvif_notify struct. So, simply + * defer the hotplug event until the device finishes resuming + */ + NV_DEBUG(drm, "Deferring HPD on %s until runtime resume\n", + name); + schedule_work(&drm->hpd_work); + + pm_runtime_put_noidle(drm->dev->dev); + return NVIF_NOTIFY_KEEP; + } else if (ret != 1 && ret != -EACCES) { + NV_WARN(drm, "HPD on %s dropped due to RPM failure: %d\n", + name, ret); + return NVIF_NOTIFY_DROP; + } if (rep->mask & NVIF_NOTIFY_CONN_V0_IRQ) { NV_DEBUG(drm, "service %s\n", name); @@ -1141,6 +1161,8 @@ nouveau_connector_hotplug(struct nvif_notify *notify) drm_helper_hpd_irq_event(connector->dev); } + pm_runtime_mark_last_busy(drm->dev->dev); + pm_runtime_put_autosuspend(drm->dev->dev); return NVIF_NOTIFY_KEEP; } -- 2.17.1

7 years

1
0
0 0

2025

2024

2023

2022

2021

2020

2019

2018

2017

Linux-stable-mirror