This is a note to let you know that I've just added the patch titled
tty: serial: imx: keep console clocks always on
to my tty git tree which can be found at
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty.git
in the tty-linus branch.
The patch will show up in the next release of the linux-next tree
(usually sometime within the next 24 hours during the week.)
The patch will hopefully also be merged in Linus's tree for the
next -rc kernel release.
If you have any questions about this process, please let me know.
>From e67c139c488e84e7eae6c333231e791f0e89b3fb Mon Sep 17 00:00:00 2001
From: Fugang Duan <fugang.duan(a)nxp.com>
Date: Wed, 11 Nov 2020 10:51:36 +0800
Subject: tty: serial: imx: keep console clocks always on
MIME-Version: 1.0
Content-Type: text/plain; charset=UTF-8
Content-Transfer-Encoding: 8bit
For below code, there has chance to cause deadlock in SMP system:
Thread 1:
clk_enable_lock();
pr_info("debug message");
clk_enable_unlock();
Thread 2:
imx_uart_console_write()
clk_enable()
clk_enable_lock();
Thread 1:
Acuired clk enable_lock -> printk -> console_trylock_spinning
Thread 2:
console_unlock() -> imx_uart_console_write -> clk_disable -> Acquite clk enable_lock
So the patch is to keep console port clocks always on like
other console drivers.
Fixes: 1cf93e0d5488 ("serial: imx: remove the uart_console() check")
Acked-by: Uwe Kleine-König <u.kleine-koenig(a)pengutronix.de>
Signed-off-by: Fugang Duan <fugang.duan(a)nxp.com>
Link: https://lore.kernel.org/r/20201111025136.29818-1-fugang.duan@nxp.com
Cc: stable <stable(a)vger.kernel.org>
[fix up build warning - gregkh]
Signed-off-by: Greg Kroah-Hartman <gregkh(a)linuxfoundation.org>
---
drivers/tty/serial/imx.c | 20 +++-----------------
1 file changed, 3 insertions(+), 17 deletions(-)
diff --git a/drivers/tty/serial/imx.c b/drivers/tty/serial/imx.c
index 3c53a3c89959..cacf7266a262 100644
--- a/drivers/tty/serial/imx.c
+++ b/drivers/tty/serial/imx.c
@@ -2008,16 +2008,6 @@ imx_uart_console_write(struct console *co, const char *s, unsigned int count)
unsigned int ucr1;
unsigned long flags = 0;
int locked = 1;
- int retval;
-
- retval = clk_enable(sport->clk_per);
- if (retval)
- return;
- retval = clk_enable(sport->clk_ipg);
- if (retval) {
- clk_disable(sport->clk_per);
- return;
- }
if (sport->port.sysrq)
locked = 0;
@@ -2053,9 +2043,6 @@ imx_uart_console_write(struct console *co, const char *s, unsigned int count)
if (locked)
spin_unlock_irqrestore(&sport->port.lock, flags);
-
- clk_disable(sport->clk_ipg);
- clk_disable(sport->clk_per);
}
/*
@@ -2156,15 +2143,14 @@ imx_uart_console_setup(struct console *co, char *options)
retval = uart_set_options(&sport->port, co, baud, parity, bits, flow);
- clk_disable(sport->clk_ipg);
if (retval) {
- clk_unprepare(sport->clk_ipg);
+ clk_disable_unprepare(sport->clk_ipg);
goto error_console;
}
- retval = clk_prepare(sport->clk_per);
+ retval = clk_prepare_enable(sport->clk_per);
if (retval)
- clk_unprepare(sport->clk_ipg);
+ clk_disable_unprepare(sport->clk_ipg);
error_console:
return retval;
--
2.29.2
Hi,
I'm requesting a stable merge for commit
1978b3a53a74e3230cd46932b149c6e62e832e9a
("x86/speculation: Allow IBPB to be conditionally enabled on CPUs with
always-on STIBP")
into the stable branch for 5.4. Note, the commit is already queued for
inclusion into the next 5.9 stable release
(https://git.kernel.org/pub/scm/linux/kernel/git/stable/stable-queue.git/tre…).
The patch fixes an issue where a Spectre-v2-user mitigation could not
be enabled via prctl() on certain AMD CPUs. The issue was introduced
in commit 21998a351512eba4ed5969006f0c55882d995ada
("x86/speculation: Avoid force-disabling IBPB based on STIBP and
enhanced IBRS.")
which was merged into the 5.4 stable branch as commit
6d60d5462a91eb46fb88b016508edfa8ee0bc7c8. This commit also exists in
4.19, 4.14, 4.9, and 4.4, so those kernels are also likely affected by
this bug.
--
Anand K. Mistry
Software Engineer
Google Australia
GPIOs that attempt to use interrupts get thwarted with a message like:
"pin 161 cannot be used as IRQ" (for instance with SD_CD). This is because
the JSL_HOSTSW_OWN offset is incorrect, so every GPIO looks like it's
owned by ACPI.
Signed-off-by: Evan Green <evgreen(a)chromium.org>
Fixes: e278dcb7048b1 ("pinctrl: intel: Add Intel Jasper Lake pin
controller support")
Cc: stable(a)vger.kernel.org
---
drivers/pinctrl/intel/pinctrl-jasperlake.c | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/drivers/pinctrl/intel/pinctrl-jasperlake.c b/drivers/pinctrl/intel/pinctrl-jasperlake.c
index 9bd0e8e6310c3..283698cf0dc7d 100644
--- a/drivers/pinctrl/intel/pinctrl-jasperlake.c
+++ b/drivers/pinctrl/intel/pinctrl-jasperlake.c
@@ -16,7 +16,7 @@
#define JSL_PAD_OWN 0x020
#define JSL_PADCFGLOCK 0x080
-#define JSL_HOSTSW_OWN 0x0b0
+#define JSL_HOSTSW_OWN 0x0c0
#define JSL_GPI_IS 0x100
#define JSL_GPI_IE 0x120
--
2.26.2
I'm announcing the release of the 5.9.8 kernel.
Only upgrade if you are vunerable to this Intel advisory:
https://www.intel.com/content/www/us/en/security-center/advisory/intel-sa-0…
Hint, if you are using SGX, then upgrade. And then possibly reconsider
the decisions you have recently made that caused you to write special
code to use that crazy thing. Personally, it still feels like a
solution in search of a problem.
If not, you should be fine, no need to upgrade. Unless you really want
to, and the, great, please do so, it's fun!
The updated 5.9.y git tree can be found at:
git://git.kernel.org/pub/scm/linux/kernel/git/stable/linux-stable.git linux-5.9.y
and can be browsed at the normal kernel.org git web browser:
https://git.kernel.org/?p=linux/kernel/git/stable/linux-stable.git;a=summary
thanks,
greg k-h
------------
Makefile | 2 +-
drivers/powercap/powercap_sys.c | 4 ++--
2 files changed, 3 insertions(+), 3 deletions(-)
Greg Kroah-Hartman (1):
Linux 5.9.8
Len Brown (1):
powercap: restrict energy meter to root access
On Tue, Nov 10, 2020 at 3:48 PM Andy Shevchenko
<andy.shevchenko(a)gmail.com> wrote:
>
>
>
> On Wednesday, November 11, 2020, Evan Green <evgreen(a)chromium.org> wrote:
>>
>> GPIOs that attempt to use interrupts get thwarted with a message like:
>> "pin 161 cannot be used as IRQ" (for instance with SD_CD). This is because
>> the JSL_HOSTSW_OWN offset is incorrect, so every GPIO looks like it's
>> owned by ACPI.
>
>
> Funny, I have created a similar patch few hours ago. Are you sure this is enough? In mine I have also padcfglock updated. But I have to confirm that, that’s why I didn’t send it out.
Oh weird! I didn't check padcfglock since it didn't happen to be
involved in the bug I was tracking down. I was trying to clean out
some skeletons in my kernel closet [1] and debugged it down to this.
If you want to smash the two patches together I'm fine with that. Let
me know, and CC me if you do post something.
-Evan
[1] https://chromium.googlesource.com/chromiumos/overlays/board-overlays/+/mast…
The Jetson Xavier NX board routes UARTA to the 40-pin header and UARTC
to a 12-pin debug header. The UARTs can be used by either the Tegra
Combined UART (TCU) driver or the Tegra 8250 driver. By default, the
TCU will use UARTC on Jetson Xavier NX. Currently, device-tree for
Xavier NX enables the TCU and the Tegra 8250 node for UARTC. Fix this
by disabling the Tegra 8250 node for UARTC and enabling the Tegra 8250
node for UARTA.
Fixes: 3f9efbbe57bc ("arm64: tegra: Add support for Jetson Xavier NX")
Cc: stable(a)vger.kernel.org
Signed-off-by: Jon Hunter <jonathanh(a)nvidia.com>
---
arch/arm64/boot/dts/nvidia/tegra194-p3668-0000.dtsi | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/arch/arm64/boot/dts/nvidia/tegra194-p3668-0000.dtsi b/arch/arm64/boot/dts/nvidia/tegra194-p3668-0000.dtsi
index a2893be80507..0dc8304a2edd 100644
--- a/arch/arm64/boot/dts/nvidia/tegra194-p3668-0000.dtsi
+++ b/arch/arm64/boot/dts/nvidia/tegra194-p3668-0000.dtsi
@@ -54,7 +54,7 @@ memory-controller@2c00000 {
status = "okay";
};
- serial@c280000 {
+ serial@3100000 {
status = "okay";
};
--
2.25.1
Hello stable(a)vger.kernel.org
We are Base Investment Company offering Corporate and Personal Loan at 3% Interest Rate for a duration of 10Years.
We also pay 1% commission to brokers, who introduce project owners for finance or other opportunities.
Please get back to me if you are interested for more
details.
Yours faithfully,
Hashim Murrah
Hello,
We ran automated tests on a recent commit from this kernel tree:
Kernel repo: https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux-stable-rc.git
Commit: 0b1c8fcc00ea - tpm: efi: Don't create binary_bios_measurements file for an empty log
The results of these automated tests are provided below.
Overall result: PASSED
Merge: OK
Compile: OK
Tests: OK
All kernel binaries, config files, and logs are available for download here:
https://arr-cki-prod-datawarehouse-public.s3.amazonaws.com/index.html?prefi…
Please reply to this email if you have any questions about the tests that we
ran or if you have any suggestions on how to make future tests more effective.
,-. ,-.
( C ) ( K ) Continuous
`-',-.`-' Kernel
( I ) Integration
`-'
______________________________________________________________________________
Compile testing
---------------
We compiled the kernel for 4 architectures:
aarch64:
make options: make -j30 INSTALL_MOD_STRIP=1 targz-pkg
ppc64le:
make options: make -j30 INSTALL_MOD_STRIP=1 targz-pkg
s390x:
make options: make -j30 INSTALL_MOD_STRIP=1 targz-pkg
x86_64:
make options: make -j30 INSTALL_MOD_STRIP=1 targz-pkg
Hardware testing
----------------
We booted each kernel and ran the following tests:
aarch64:
Host 1:
✅ Boot test
✅ ACPI table test
✅ ACPI enabled test
✅ LTP
✅ Loopdev Sanity
✅ Memory: fork_mem
✅ Memory function: memfd_create
✅ AMTU (Abstract Machine Test Utility)
✅ Networking bridge: sanity
✅ Networking socket: fuzz
✅ Networking: igmp conformance test
✅ Networking route: pmtu
✅ Networking route_func - local
✅ Networking route_func - forward
✅ Networking TCP: keepalive test
✅ Networking UDP: socket
✅ Networking tunnel: geneve basic test
✅ Networking tunnel: gre basic
✅ L2TP basic test
✅ Networking tunnel: vxlan basic
✅ Networking ipsec: basic netns - transport
✅ Networking ipsec: basic netns - tunnel
✅ Libkcapi AF_ALG test
✅ pciutils: update pci ids test
✅ ALSA PCM loopback test
✅ ALSA Control (mixer) Userspace Element test
✅ storage: SCSI VPD
🚧 ✅ CIFS Connectathon
🚧 ✅ POSIX pjd-fstest suites
🚧 ✅ Firmware test suite
🚧 ✅ jvm - jcstress tests
🚧 ✅ Memory function: kaslr
🚧 ✅ Ethernet drivers sanity
🚧 ✅ Networking firewall: basic netfilter test
🚧 ✅ audit: audit testsuite test
🚧 ✅ trace: ftrace/tracer
🚧 ✅ kdump - kexec_boot
Host 2:
✅ Boot test
✅ selinux-policy: serge-testsuite
✅ storage: software RAID testing
✅ stress: stress-ng
🚧 ✅ Podman system integration test - as root
🚧 ✅ Podman system integration test - as user
🚧 ✅ xfstests - ext4
🚧 ✅ xfstests - xfs
🚧 ✅ xfstests - btrfs
🚧 ❌ IPMI driver test
🚧 ✅ IPMItool loop stress test
🚧 ✅ Storage blktests
🚧 ✅ Storage block - filesystem fio test
🚧 ✅ Storage block - queue scheduler test
🚧 ✅ Storage nvme - tcp
ppc64le:
Host 1:
⚡ Internal infrastructure issues prevented one or more tests (marked
with ⚡⚡⚡) from running on this architecture.
This is not the fault of the kernel that was tested.
⚡⚡⚡ Boot test
🚧 ⚡⚡⚡ kdump - sysrq-c
Host 2:
⚡ Internal infrastructure issues prevented one or more tests (marked
with ⚡⚡⚡) from running on this architecture.
This is not the fault of the kernel that was tested.
✅ Boot test
✅ selinux-policy: serge-testsuite
✅ storage: software RAID testing
🚧 ✅ Podman system integration test - as root
🚧 ✅ Podman system integration test - as user
🚧 ✅ xfstests - ext4
🚧 ✅ xfstests - xfs
🚧 ✅ xfstests - btrfs
🚧 ⚡⚡⚡ IPMI driver test
🚧 ⚡⚡⚡ IPMItool loop stress test
🚧 ⚡⚡⚡ Storage blktests
🚧 ⚡⚡⚡ Storage block - filesystem fio test
🚧 ⚡⚡⚡ Storage block - queue scheduler test
🚧 ⚡⚡⚡ Storage nvme - tcp
Host 3:
⚡ Internal infrastructure issues prevented one or more tests (marked
with ⚡⚡⚡) from running on this architecture.
This is not the fault of the kernel that was tested.
⚡⚡⚡ Boot test
⚡⚡⚡ LTP
⚡⚡⚡ Loopdev Sanity
⚡⚡⚡ Memory: fork_mem
⚡⚡⚡ Memory function: memfd_create
⚡⚡⚡ AMTU (Abstract Machine Test Utility)
⚡⚡⚡ Networking bridge: sanity
⚡⚡⚡ Networking socket: fuzz
⚡⚡⚡ Networking route: pmtu
⚡⚡⚡ Networking route_func - local
⚡⚡⚡ Networking route_func - forward
⚡⚡⚡ Networking TCP: keepalive test
⚡⚡⚡ Networking UDP: socket
⚡⚡⚡ Networking tunnel: geneve basic test
⚡⚡⚡ Networking tunnel: gre basic
⚡⚡⚡ L2TP basic test
⚡⚡⚡ Networking tunnel: vxlan basic
⚡⚡⚡ Networking ipsec: basic netns - tunnel
⚡⚡⚡ Libkcapi AF_ALG test
⚡⚡⚡ pciutils: update pci ids test
⚡⚡⚡ ALSA PCM loopback test
⚡⚡⚡ ALSA Control (mixer) Userspace Element test
🚧 ⚡⚡⚡ CIFS Connectathon
🚧 ⚡⚡⚡ POSIX pjd-fstest suites
🚧 ⚡⚡⚡ jvm - jcstress tests
🚧 ⚡⚡⚡ Memory function: kaslr
🚧 ⚡⚡⚡ Ethernet drivers sanity
🚧 ⚡⚡⚡ Networking firewall: basic netfilter test
🚧 ⚡⚡⚡ audit: audit testsuite test
🚧 ⚡⚡⚡ trace: ftrace/tracer
Host 4:
⚡ Internal infrastructure issues prevented one or more tests (marked
with ⚡⚡⚡) from running on this architecture.
This is not the fault of the kernel that was tested.
⚡⚡⚡ Boot test
⚡⚡⚡ LTP
⚡⚡⚡ Loopdev Sanity
⚡⚡⚡ Memory: fork_mem
⚡⚡⚡ Memory function: memfd_create
⚡⚡⚡ AMTU (Abstract Machine Test Utility)
⚡⚡⚡ Networking bridge: sanity
⚡⚡⚡ Networking socket: fuzz
⚡⚡⚡ Networking route: pmtu
⚡⚡⚡ Networking route_func - local
⚡⚡⚡ Networking route_func - forward
⚡⚡⚡ Networking TCP: keepalive test
⚡⚡⚡ Networking UDP: socket
⚡⚡⚡ Networking tunnel: geneve basic test
⚡⚡⚡ Networking tunnel: gre basic
⚡⚡⚡ L2TP basic test
⚡⚡⚡ Networking tunnel: vxlan basic
⚡⚡⚡ Networking ipsec: basic netns - tunnel
⚡⚡⚡ Libkcapi AF_ALG test
⚡⚡⚡ pciutils: update pci ids test
⚡⚡⚡ ALSA PCM loopback test
⚡⚡⚡ ALSA Control (mixer) Userspace Element test
🚧 ⚡⚡⚡ CIFS Connectathon
🚧 ⚡⚡⚡ POSIX pjd-fstest suites
🚧 ⚡⚡⚡ jvm - jcstress tests
🚧 ⚡⚡⚡ Memory function: kaslr
🚧 ⚡⚡⚡ Ethernet drivers sanity
🚧 ⚡⚡⚡ Networking firewall: basic netfilter test
🚧 ⚡⚡⚡ audit: audit testsuite test
🚧 ⚡⚡⚡ trace: ftrace/tracer
s390x:
Host 1:
✅ Boot test
✅ LTP
✅ Loopdev Sanity
✅ Memory: fork_mem
✅ Memory function: memfd_create
✅ AMTU (Abstract Machine Test Utility)
✅ Networking bridge: sanity
✅ Networking route: pmtu
✅ Networking route_func - local
✅ Networking route_func - forward
✅ Networking TCP: keepalive test
✅ Networking UDP: socket
✅ Networking tunnel: geneve basic test
✅ Networking tunnel: gre basic
✅ L2TP basic test
✅ Networking tunnel: vxlan basic
✅ Networking ipsec: basic netns - transport
✅ Networking ipsec: basic netns - tunnel
✅ Libkcapi AF_ALG test
🚧 ✅ CIFS Connectathon
🚧 ✅ POSIX pjd-fstest suites
🚧 ✅ jvm - jcstress tests
🚧 ✅ Memory function: kaslr
🚧 ✅ Ethernet drivers sanity
🚧 ✅ Networking firewall: basic netfilter test
🚧 ✅ audit: audit testsuite test
🚧 ✅ trace: ftrace/tracer
Host 2:
✅ Boot test
✅ selinux-policy: serge-testsuite
✅ stress: stress-ng
🚧 ✅ Podman system integration test - as root
🚧 ✅ Podman system integration test - as user
🚧 ✅ Storage blktests
🚧 ✅ Storage nvme - tcp
x86_64:
Host 1:
✅ Boot test
✅ ACPI table test
✅ LTP
✅ Loopdev Sanity
✅ Memory: fork_mem
✅ Memory function: memfd_create
✅ AMTU (Abstract Machine Test Utility)
✅ Networking bridge: sanity
✅ Networking socket: fuzz
✅ Networking: igmp conformance test
✅ Networking route: pmtu
✅ Networking route_func - local
✅ Networking route_func - forward
✅ Networking TCP: keepalive test
✅ Networking UDP: socket
✅ Networking tunnel: geneve basic test
✅ Networking tunnel: gre basic
✅ L2TP basic test
✅ Networking tunnel: vxlan basic
✅ Networking ipsec: basic netns - transport
✅ Networking ipsec: basic netns - tunnel
✅ Libkcapi AF_ALG test
✅ pciutils: sanity smoke test
✅ pciutils: update pci ids test
✅ ALSA PCM loopback test
✅ ALSA Control (mixer) Userspace Element test
✅ storage: SCSI VPD
🚧 ✅ CIFS Connectathon
🚧 ✅ POSIX pjd-fstest suites
🚧 ✅ Firmware test suite
🚧 ✅ jvm - jcstress tests
🚧 ✅ Memory function: kaslr
🚧 ✅ Ethernet drivers sanity
🚧 ✅ Networking firewall: basic netfilter test
🚧 ✅ audit: audit testsuite test
🚧 ✅ trace: ftrace/tracer
🚧 ✅ kdump - kexec_boot
Host 2:
✅ Boot test
🚧 ✅ kdump - sysrq-c
🚧 ✅ kdump - file-load
Host 3:
⚡ Internal infrastructure issues prevented one or more tests (marked
with ⚡⚡⚡) from running on this architecture.
This is not the fault of the kernel that was tested.
✅ Boot test
✅ selinux-policy: serge-testsuite
✅ storage: software RAID testing
✅ stress: stress-ng
🚧 ✅ Podman system integration test - as root
🚧 ✅ Podman system integration test - as user
🚧 ❌ CPU: Frequency Driver Test
🚧 ✅ CPU: Idle Test
🚧 ✅ xfstests - ext4
🚧 ✅ xfstests - xfs
🚧 ✅ xfstests - btrfs
🚧 ⚡⚡⚡ IOMMU boot test
🚧 ⚡⚡⚡ IPMI driver test
🚧 ⚡⚡⚡ IPMItool loop stress test
🚧 ⚡⚡⚡ power-management: cpupower/sanity test
🚧 ⚡⚡⚡ Storage blktests
🚧 ⚡⚡⚡ Storage block - filesystem fio test
🚧 ⚡⚡⚡ Storage block - queue scheduler test
🚧 ⚡⚡⚡ Storage nvme - tcp
Test sources: https://gitlab.com/cki-project/kernel-tests
💚 Pull requests are welcome for new tests or improvements to existing tests!
Aborted tests
-------------
Tests that didn't complete running successfully are marked with ⚡⚡⚡.
If this was caused by an infrastructure issue, we try to mark that
explicitly in the report.
Waived tests
------------
If the test run included waived tests, they are marked with 🚧. Such tests are
executed but their results are not taken into account. Tests are waived when
their results are not reliable enough, e.g. when they're just introduced or are
being fixed.
Testing timeout
---------------
We aim to provide a report within reasonable timeframe. Tests that haven't
finished running yet are marked with ⏱.
Hello,
We ran automated tests on a recent commit from this kernel tree:
Kernel repo: https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux-stable-rc.git
Commit: 694b8f6427ae - tpm: efi: Don't create binary_bios_measurements file for an empty log
The results of these automated tests are provided below.
Overall result: PASSED
Merge: OK
Compile: OK
Tests: OK
All kernel binaries, config files, and logs are available for download here:
https://arr-cki-prod-datawarehouse-public.s3.amazonaws.com/index.html?prefi…
Please reply to this email if you have any questions about the tests that we
ran or if you have any suggestions on how to make future tests more effective.
,-. ,-.
( C ) ( K ) Continuous
`-',-.`-' Kernel
( I ) Integration
`-'
______________________________________________________________________________
Compile testing
---------------
We compiled the kernel for 4 architectures:
aarch64:
make options: make -j30 INSTALL_MOD_STRIP=1 targz-pkg
ppc64le:
make options: make -j30 INSTALL_MOD_STRIP=1 targz-pkg
s390x:
make options: make -j30 INSTALL_MOD_STRIP=1 targz-pkg
x86_64:
make options: make -j30 INSTALL_MOD_STRIP=1 targz-pkg
Hardware testing
----------------
We booted each kernel and ran the following tests:
aarch64:
Host 1:
⚡ Internal infrastructure issues prevented one or more tests (marked
with ⚡⚡⚡) from running on this architecture.
This is not the fault of the kernel that was tested.
⚡⚡⚡ Boot test
⚡⚡⚡ selinux-policy: serge-testsuite
⚡⚡⚡ storage: software RAID testing
⚡⚡⚡ stress: stress-ng
🚧 ⚡⚡⚡ Podman system integration test - as root
🚧 ⚡⚡⚡ Podman system integration test - as user
🚧 ⚡⚡⚡ xfstests - ext4
🚧 ⚡⚡⚡ xfstests - xfs
🚧 ⚡⚡⚡ xfstests - btrfs
🚧 ⚡⚡⚡ IPMI driver test
🚧 ⚡⚡⚡ IPMItool loop stress test
🚧 ⚡⚡⚡ Storage blktests
🚧 ⚡⚡⚡ Storage block - filesystem fio test
🚧 ⚡⚡⚡ Storage block - queue scheduler test
🚧 ⚡⚡⚡ Storage nvme - tcp
Host 2:
✅ Boot test
✅ ACPI table test
✅ ACPI enabled test
✅ LTP
✅ Loopdev Sanity
✅ Memory: fork_mem
✅ Memory function: memfd_create
✅ AMTU (Abstract Machine Test Utility)
✅ Networking bridge: sanity
✅ Networking socket: fuzz
✅ Networking: igmp conformance test
✅ Networking route: pmtu
✅ Networking route_func - local
✅ Networking route_func - forward
✅ Networking TCP: keepalive test
✅ Networking UDP: socket
✅ Networking tunnel: geneve basic test
✅ Networking tunnel: gre basic
✅ L2TP basic test
✅ Networking tunnel: vxlan basic
✅ Networking ipsec: basic netns - transport
✅ Networking ipsec: basic netns - tunnel
✅ Libkcapi AF_ALG test
✅ pciutils: update pci ids test
✅ ALSA PCM loopback test
✅ ALSA Control (mixer) Userspace Element test
✅ storage: SCSI VPD
🚧 ✅ CIFS Connectathon
🚧 ✅ POSIX pjd-fstest suites
🚧 ✅ Firmware test suite
🚧 ✅ jvm - jcstress tests
🚧 ✅ Memory function: kaslr
🚧 ✅ Ethernet drivers sanity
🚧 ✅ Networking firewall: basic netfilter test
🚧 ✅ audit: audit testsuite test
🚧 ✅ trace: ftrace/tracer
🚧 ✅ kdump - kexec_boot
Host 3:
⚡ Internal infrastructure issues prevented one or more tests (marked
with ⚡⚡⚡) from running on this architecture.
This is not the fault of the kernel that was tested.
✅ Boot test
✅ selinux-policy: serge-testsuite
✅ storage: software RAID testing
✅ stress: stress-ng
🚧 ✅ Podman system integration test - as root
🚧 ✅ Podman system integration test - as user
🚧 ✅ xfstests - ext4
🚧 ✅ xfstests - xfs
🚧 ✅ xfstests - btrfs
🚧 ✅ IPMI driver test
🚧 ✅ IPMItool loop stress test
🚧 ✅ Storage blktests
🚧 ✅ Storage block - filesystem fio test
🚧 ⚡⚡⚡ Storage block - queue scheduler test
🚧 ⚡⚡⚡ Storage nvme - tcp
ppc64le:
Host 1:
✅ Boot test
✅ selinux-policy: serge-testsuite
✅ storage: software RAID testing
🚧 ✅ Podman system integration test - as root
🚧 ✅ Podman system integration test - as user
🚧 ✅ xfstests - ext4
🚧 ✅ xfstests - xfs
🚧 ✅ xfstests - btrfs
🚧 ✅ IPMI driver test
🚧 ✅ IPMItool loop stress test
🚧 ✅ Storage blktests
🚧 ✅ Storage block - filesystem fio test
🚧 ✅ Storage block - queue scheduler test
🚧 ✅ Storage nvme - tcp
Host 2:
⚡ Internal infrastructure issues prevented one or more tests (marked
with ⚡⚡⚡) from running on this architecture.
This is not the fault of the kernel that was tested.
⚡⚡⚡ Boot test
🚧 ⚡⚡⚡ kdump - sysrq-c
Host 3:
✅ Boot test
✅ LTP
✅ Loopdev Sanity
✅ Memory: fork_mem
✅ Memory function: memfd_create
✅ AMTU (Abstract Machine Test Utility)
✅ Networking bridge: sanity
✅ Networking socket: fuzz
✅ Networking route: pmtu
✅ Networking route_func - local
✅ Networking route_func - forward
✅ Networking TCP: keepalive test
✅ Networking UDP: socket
✅ Networking tunnel: geneve basic test
✅ Networking tunnel: gre basic
✅ L2TP basic test
✅ Networking tunnel: vxlan basic
✅ Networking ipsec: basic netns - tunnel
✅ Libkcapi AF_ALG test
✅ pciutils: update pci ids test
✅ ALSA PCM loopback test
✅ ALSA Control (mixer) Userspace Element test
🚧 ✅ CIFS Connectathon
🚧 ✅ POSIX pjd-fstest suites
🚧 ✅ jvm - jcstress tests
🚧 ✅ Memory function: kaslr
🚧 ✅ Ethernet drivers sanity
🚧 ✅ Networking firewall: basic netfilter test
🚧 ✅ audit: audit testsuite test
🚧 ✅ trace: ftrace/tracer
Host 4:
✅ Boot test
🚧 ✅ kdump - sysrq-c
s390x:
Host 1:
✅ Boot test
✅ selinux-policy: serge-testsuite
✅ stress: stress-ng
🚧 ✅ Podman system integration test - as root
🚧 ✅ Podman system integration test - as user
🚧 ✅ Storage blktests
🚧 ✅ Storage nvme - tcp
Host 2:
✅ Boot test
✅ LTP
✅ Loopdev Sanity
✅ Memory: fork_mem
✅ Memory function: memfd_create
✅ AMTU (Abstract Machine Test Utility)
✅ Networking bridge: sanity
✅ Networking route: pmtu
✅ Networking route_func - local
✅ Networking route_func - forward
✅ Networking TCP: keepalive test
✅ Networking UDP: socket
✅ Networking tunnel: geneve basic test
✅ Networking tunnel: gre basic
✅ L2TP basic test
✅ Networking tunnel: vxlan basic
✅ Networking ipsec: basic netns - transport
✅ Networking ipsec: basic netns - tunnel
✅ Libkcapi AF_ALG test
🚧 ✅ CIFS Connectathon
🚧 ✅ POSIX pjd-fstest suites
🚧 ✅ jvm - jcstress tests
🚧 ✅ Memory function: kaslr
🚧 ✅ Ethernet drivers sanity
🚧 ✅ Networking firewall: basic netfilter test
🚧 ✅ audit: audit testsuite test
🚧 ✅ trace: ftrace/tracer
x86_64:
Host 1:
⚡ Internal infrastructure issues prevented one or more tests (marked
with ⚡⚡⚡) from running on this architecture.
This is not the fault of the kernel that was tested.
✅ Boot test
✅ selinux-policy: serge-testsuite
✅ storage: software RAID testing
✅ stress: stress-ng
🚧 ✅ Podman system integration test - as root
🚧 ✅ Podman system integration test - as user
🚧 ❌ CPU: Frequency Driver Test
🚧 ✅ CPU: Idle Test
🚧 ✅ xfstests - ext4
🚧 ✅ xfstests - xfs
🚧 ✅ xfstests - btrfs
🚧 ⚡⚡⚡ IOMMU boot test
🚧 ⚡⚡⚡ IPMI driver test
🚧 ⚡⚡⚡ IPMItool loop stress test
🚧 ⚡⚡⚡ power-management: cpupower/sanity test
🚧 ⚡⚡⚡ Storage blktests
🚧 ⚡⚡⚡ Storage block - filesystem fio test
🚧 ⚡⚡⚡ Storage block - queue scheduler test
🚧 ⚡⚡⚡ Storage nvme - tcp
Host 2:
✅ Boot test
✅ ACPI table test
✅ LTP
✅ Loopdev Sanity
✅ Memory: fork_mem
✅ Memory function: memfd_create
✅ AMTU (Abstract Machine Test Utility)
✅ Networking bridge: sanity
✅ Networking socket: fuzz
✅ Networking: igmp conformance test
✅ Networking route: pmtu
✅ Networking route_func - local
✅ Networking route_func - forward
✅ Networking TCP: keepalive test
✅ Networking UDP: socket
✅ Networking tunnel: geneve basic test
✅ Networking tunnel: gre basic
✅ L2TP basic test
✅ Networking tunnel: vxlan basic
✅ Networking ipsec: basic netns - transport
✅ Networking ipsec: basic netns - tunnel
✅ Libkcapi AF_ALG test
✅ pciutils: sanity smoke test
✅ pciutils: update pci ids test
✅ ALSA PCM loopback test
✅ ALSA Control (mixer) Userspace Element test
✅ storage: SCSI VPD
🚧 ✅ CIFS Connectathon
🚧 ✅ POSIX pjd-fstest suites
🚧 ✅ Firmware test suite
🚧 ✅ jvm - jcstress tests
🚧 ✅ Memory function: kaslr
🚧 ✅ Ethernet drivers sanity
🚧 ✅ Networking firewall: basic netfilter test
🚧 ✅ audit: audit testsuite test
🚧 ✅ trace: ftrace/tracer
🚧 ✅ kdump - kexec_boot
Host 3:
✅ Boot test
🚧 ✅ kdump - sysrq-c
🚧 ✅ kdump - file-load
Test sources: https://gitlab.com/cki-project/kernel-tests
💚 Pull requests are welcome for new tests or improvements to existing tests!
Aborted tests
-------------
Tests that didn't complete running successfully are marked with ⚡⚡⚡.
If this was caused by an infrastructure issue, we try to mark that
explicitly in the report.
Waived tests
------------
If the test run included waived tests, they are marked with 🚧. Such tests are
executed but their results are not taken into account. Tests are waived when
their results are not reliable enough, e.g. when they're just introduced or are
being fixed.
Testing timeout
---------------
We aim to provide a report within reasonable timeframe. Tests that haven't
finished running yet are marked with ⏱.
Hello,
We ran automated tests on a recent commit from this kernel tree:
Kernel repo: https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux-stable-rc.git
Commit: 839e9e06c834 - Linux 5.9.7
The results of these automated tests are provided below.
Overall result: PASSED
Merge: OK
Compile: OK
Tests: OK
All kernel binaries, config files, and logs are available for download here:
https://arr-cki-prod-datawarehouse-public.s3.amazonaws.com/index.html?prefi…
Please reply to this email if you have any questions about the tests that we
ran or if you have any suggestions on how to make future tests more effective.
,-. ,-.
( C ) ( K ) Continuous
`-',-.`-' Kernel
( I ) Integration
`-'
______________________________________________________________________________
Compile testing
---------------
We compiled the kernel for 4 architectures:
aarch64:
make options: make -j30 INSTALL_MOD_STRIP=1 targz-pkg
ppc64le:
make options: make -j30 INSTALL_MOD_STRIP=1 targz-pkg
s390x:
make options: make -j30 INSTALL_MOD_STRIP=1 targz-pkg
x86_64:
make options: make -j30 INSTALL_MOD_STRIP=1 targz-pkg
Hardware testing
----------------
We booted each kernel and ran the following tests:
aarch64:
Host 1:
⚡ Internal infrastructure issues prevented one or more tests (marked
with ⚡⚡⚡) from running on this architecture.
This is not the fault of the kernel that was tested.
✅ Boot test
✅ selinux-policy: serge-testsuite
✅ storage: software RAID testing
✅ stress: stress-ng
🚧 ✅ Podman system integration test - as root
🚧 ✅ Podman system integration test - as user
🚧 ✅ xfstests - ext4
🚧 ✅ xfstests - xfs
🚧 ✅ xfstests - btrfs
🚧 ✅ IPMI driver test
🚧 ✅ IPMItool loop stress test
🚧 ✅ Storage blktests
🚧 ✅ Storage block - filesystem fio test
🚧 ⚡⚡⚡ Storage block - queue scheduler test
🚧 ⚡⚡⚡ Storage nvme - tcp
Host 2:
⚡ Internal infrastructure issues prevented one or more tests (marked
with ⚡⚡⚡) from running on this architecture.
This is not the fault of the kernel that was tested.
⚡⚡⚡ Boot test
⚡⚡⚡ ACPI table test
⚡⚡⚡ ACPI enabled test
⚡⚡⚡ LTP
⚡⚡⚡ Loopdev Sanity
⚡⚡⚡ Memory: fork_mem
⚡⚡⚡ Memory function: memfd_create
⚡⚡⚡ AMTU (Abstract Machine Test Utility)
⚡⚡⚡ Networking bridge: sanity
⚡⚡⚡ Networking socket: fuzz
⚡⚡⚡ Networking: igmp conformance test
⚡⚡⚡ Networking route: pmtu
⚡⚡⚡ Networking route_func - local
⚡⚡⚡ Networking route_func - forward
⚡⚡⚡ Networking TCP: keepalive test
⚡⚡⚡ Networking UDP: socket
⚡⚡⚡ Networking tunnel: geneve basic test
⚡⚡⚡ Networking tunnel: gre basic
⚡⚡⚡ L2TP basic test
⚡⚡⚡ Networking tunnel: vxlan basic
⚡⚡⚡ Networking ipsec: basic netns - transport
⚡⚡⚡ Networking ipsec: basic netns - tunnel
⚡⚡⚡ Libkcapi AF_ALG test
⚡⚡⚡ pciutils: update pci ids test
⚡⚡⚡ ALSA PCM loopback test
⚡⚡⚡ ALSA Control (mixer) Userspace Element test
⚡⚡⚡ storage: SCSI VPD
🚧 ⚡⚡⚡ CIFS Connectathon
🚧 ⚡⚡⚡ POSIX pjd-fstest suites
🚧 ⚡⚡⚡ Firmware test suite
🚧 ⚡⚡⚡ jvm - jcstress tests
🚧 ⚡⚡⚡ Memory function: kaslr
🚧 ⚡⚡⚡ Ethernet drivers sanity
🚧 ⚡⚡⚡ Networking firewall: basic netfilter test
🚧 ⚡⚡⚡ audit: audit testsuite test
🚧 ⚡⚡⚡ trace: ftrace/tracer
🚧 ⚡⚡⚡ kdump - kexec_boot
Host 3:
✅ Boot test
✅ ACPI table test
✅ ACPI enabled test
✅ LTP
✅ Loopdev Sanity
✅ Memory: fork_mem
✅ Memory function: memfd_create
✅ AMTU (Abstract Machine Test Utility)
✅ Networking bridge: sanity
✅ Networking socket: fuzz
✅ Networking: igmp conformance test
✅ Networking route: pmtu
✅ Networking route_func - local
✅ Networking route_func - forward
✅ Networking TCP: keepalive test
✅ Networking UDP: socket
✅ Networking tunnel: geneve basic test
✅ Networking tunnel: gre basic
✅ L2TP basic test
✅ Networking tunnel: vxlan basic
✅ Networking ipsec: basic netns - transport
✅ Networking ipsec: basic netns - tunnel
✅ Libkcapi AF_ALG test
✅ pciutils: update pci ids test
✅ ALSA PCM loopback test
✅ ALSA Control (mixer) Userspace Element test
✅ storage: SCSI VPD
🚧 ✅ CIFS Connectathon
🚧 ✅ POSIX pjd-fstest suites
🚧 ✅ Firmware test suite
🚧 ✅ jvm - jcstress tests
🚧 ✅ Memory function: kaslr
🚧 ✅ Ethernet drivers sanity
🚧 ✅ Networking firewall: basic netfilter test
🚧 ✅ audit: audit testsuite test
🚧 ✅ trace: ftrace/tracer
🚧 ✅ kdump - kexec_boot
ppc64le:
Host 1:
✅ Boot test
🚧 ✅ kdump - sysrq-c
Host 2:
✅ Boot test
✅ selinux-policy: serge-testsuite
✅ storage: software RAID testing
🚧 ✅ Podman system integration test - as root
🚧 ✅ Podman system integration test - as user
🚧 ✅ xfstests - ext4
🚧 ✅ xfstests - xfs
🚧 ✅ xfstests - btrfs
🚧 ✅ IPMI driver test
🚧 ✅ IPMItool loop stress test
🚧 ✅ Storage blktests
🚧 ✅ Storage block - filesystem fio test
🚧 ✅ Storage block - queue scheduler test
🚧 ✅ Storage nvme - tcp
Host 3:
⚡ Internal infrastructure issues prevented one or more tests (marked
with ⚡⚡⚡) from running on this architecture.
This is not the fault of the kernel that was tested.
✅ Boot test
✅ LTP
✅ Loopdev Sanity
✅ Memory: fork_mem
✅ Memory function: memfd_create
✅ AMTU (Abstract Machine Test Utility)
✅ Networking bridge: sanity
✅ Networking socket: fuzz
✅ Networking route: pmtu
✅ Networking route_func - local
✅ Networking route_func - forward
✅ Networking TCP: keepalive test
✅ Networking UDP: socket
✅ Networking tunnel: geneve basic test
✅ Networking tunnel: gre basic
✅ L2TP basic test
✅ Networking tunnel: vxlan basic
✅ Networking ipsec: basic netns - tunnel
✅ Libkcapi AF_ALG test
✅ pciutils: update pci ids test
✅ ALSA PCM loopback test
✅ ALSA Control (mixer) Userspace Element test
🚧 ✅ CIFS Connectathon
🚧 ⚡⚡⚡ POSIX pjd-fstest suites
🚧 ✅ jvm - jcstress tests
🚧 ✅ Memory function: kaslr
🚧 ✅ Ethernet drivers sanity
🚧 ✅ Networking firewall: basic netfilter test
🚧 ✅ audit: audit testsuite test
🚧 ✅ trace: ftrace/tracer
s390x:
Host 1:
✅ Boot test
✅ LTP
✅ Loopdev Sanity
✅ Memory: fork_mem
✅ Memory function: memfd_create
✅ AMTU (Abstract Machine Test Utility)
✅ Networking bridge: sanity
✅ Networking route: pmtu
✅ Networking route_func - local
✅ Networking route_func - forward
✅ Networking TCP: keepalive test
✅ Networking UDP: socket
✅ Networking tunnel: geneve basic test
✅ Networking tunnel: gre basic
✅ L2TP basic test
✅ Networking tunnel: vxlan basic
✅ Networking ipsec: basic netns - transport
✅ Networking ipsec: basic netns - tunnel
✅ Libkcapi AF_ALG test
🚧 ✅ CIFS Connectathon
🚧 ✅ POSIX pjd-fstest suites
🚧 ✅ jvm - jcstress tests
🚧 ✅ Memory function: kaslr
🚧 ✅ Ethernet drivers sanity
🚧 ✅ Networking firewall: basic netfilter test
🚧 ✅ audit: audit testsuite test
🚧 ✅ trace: ftrace/tracer
Host 2:
✅ Boot test
✅ selinux-policy: serge-testsuite
✅ stress: stress-ng
🚧 ✅ Podman system integration test - as root
🚧 ✅ Podman system integration test - as user
🚧 ✅ Storage blktests
🚧 ✅ Storage nvme - tcp
x86_64:
Host 1:
⚡ Internal infrastructure issues prevented one or more tests (marked
with ⚡⚡⚡) from running on this architecture.
This is not the fault of the kernel that was tested.
✅ Boot test
✅ selinux-policy: serge-testsuite
✅ storage: software RAID testing
✅ stress: stress-ng
🚧 ✅ Podman system integration test - as root
🚧 ✅ Podman system integration test - as user
🚧 ❌ CPU: Frequency Driver Test
🚧 ✅ CPU: Idle Test
🚧 ✅ xfstests - ext4
🚧 ✅ xfstests - xfs
🚧 ✅ xfstests - btrfs
🚧 ⚡⚡⚡ IOMMU boot test
🚧 ⚡⚡⚡ IPMI driver test
🚧 ⚡⚡⚡ IPMItool loop stress test
🚧 ⚡⚡⚡ power-management: cpupower/sanity test
🚧 ⚡⚡⚡ Storage blktests
🚧 ⚡⚡⚡ Storage block - filesystem fio test
🚧 ⚡⚡⚡ Storage block - queue scheduler test
🚧 ⚡⚡⚡ Storage nvme - tcp
Host 2:
✅ Boot test
🚧 ✅ kdump - sysrq-c
🚧 ✅ kdump - file-load
Host 3:
✅ Boot test
✅ ACPI table test
✅ LTP
✅ Loopdev Sanity
✅ Memory: fork_mem
✅ Memory function: memfd_create
✅ AMTU (Abstract Machine Test Utility)
✅ Networking bridge: sanity
✅ Networking socket: fuzz
✅ Networking: igmp conformance test
✅ Networking route: pmtu
✅ Networking route_func - local
✅ Networking route_func - forward
✅ Networking TCP: keepalive test
✅ Networking UDP: socket
✅ Networking tunnel: geneve basic test
✅ Networking tunnel: gre basic
✅ L2TP basic test
✅ Networking tunnel: vxlan basic
✅ Networking ipsec: basic netns - transport
✅ Networking ipsec: basic netns - tunnel
✅ Libkcapi AF_ALG test
✅ pciutils: sanity smoke test
✅ pciutils: update pci ids test
✅ ALSA PCM loopback test
✅ ALSA Control (mixer) Userspace Element test
✅ storage: SCSI VPD
🚧 ✅ CIFS Connectathon
🚧 ✅ POSIX pjd-fstest suites
🚧 ✅ Firmware test suite
🚧 ✅ jvm - jcstress tests
🚧 ✅ Memory function: kaslr
🚧 ✅ Ethernet drivers sanity
🚧 ✅ Networking firewall: basic netfilter test
🚧 ✅ audit: audit testsuite test
🚧 ✅ trace: ftrace/tracer
🚧 ✅ kdump - kexec_boot
Test sources: https://gitlab.com/cki-project/kernel-tests
💚 Pull requests are welcome for new tests or improvements to existing tests!
Aborted tests
-------------
Tests that didn't complete running successfully are marked with ⚡⚡⚡.
If this was caused by an infrastructure issue, we try to mark that
explicitly in the report.
Waived tests
------------
If the test run included waived tests, they are marked with 🚧. Such tests are
executed but their results are not taken into account. Tests are waived when
their results are not reliable enough, e.g. when they're just introduced or are
being fixed.
Testing timeout
---------------
We aim to provide a report within reasonable timeframe. Tests that haven't
finished running yet are marked with ⏱.
Hello,
We ran automated tests on a recent commit from this kernel tree:
Kernel repo: https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux-stable-rc.git
Commit: 10be282f965e - perf/core: Fix a memory leak in perf_event_parse_addr_filter()
The results of these automated tests are provided below.
Overall result: PASSED
Merge: OK
Compile: OK
Tests: OK
All kernel binaries, config files, and logs are available for download here:
https://arr-cki-prod-datawarehouse-public.s3.amazonaws.com/index.html?prefi…
Please reply to this email if you have any questions about the tests that we
ran or if you have any suggestions on how to make future tests more effective.
,-. ,-.
( C ) ( K ) Continuous
`-',-.`-' Kernel
( I ) Integration
`-'
______________________________________________________________________________
Compile testing
---------------
We compiled the kernel for 4 architectures:
aarch64:
make options: make -j30 INSTALL_MOD_STRIP=1 targz-pkg
ppc64le:
make options: make -j30 INSTALL_MOD_STRIP=1 targz-pkg
s390x:
make options: make -j30 INSTALL_MOD_STRIP=1 targz-pkg
x86_64:
make options: make -j30 INSTALL_MOD_STRIP=1 targz-pkg
Hardware testing
----------------
We booted each kernel and ran the following tests:
aarch64:
Host 1:
⚡ Internal infrastructure issues prevented one or more tests (marked
with ⚡⚡⚡) from running on this architecture.
This is not the fault of the kernel that was tested.
✅ Boot test
✅ selinux-policy: serge-testsuite
✅ storage: software RAID testing
✅ stress: stress-ng
🚧 ✅ Podman system integration test - as root
🚧 ✅ Podman system integration test - as user
🚧 ✅ xfstests - ext4
🚧 ✅ xfstests - xfs
🚧 ✅ xfstests - btrfs
🚧 ⚡⚡⚡ IPMI driver test
🚧 ⚡⚡⚡ IPMItool loop stress test
🚧 ⚡⚡⚡ Storage blktests
🚧 ⚡⚡⚡ Storage block - filesystem fio test
🚧 ⚡⚡⚡ Storage block - queue scheduler test
🚧 ⚡⚡⚡ Storage nvme - tcp
Host 2:
⚡ Internal infrastructure issues prevented one or more tests (marked
with ⚡⚡⚡) from running on this architecture.
This is not the fault of the kernel that was tested.
✅ Boot test
✅ ACPI table test
✅ ACPI enabled test
⚡⚡⚡ LTP
⚡⚡⚡ Loopdev Sanity
⚡⚡⚡ Memory: fork_mem
⚡⚡⚡ Memory function: memfd_create
⚡⚡⚡ AMTU (Abstract Machine Test Utility)
⚡⚡⚡ Networking bridge: sanity
⚡⚡⚡ Networking socket: fuzz
⚡⚡⚡ Networking: igmp conformance test
⚡⚡⚡ Networking route: pmtu
⚡⚡⚡ Networking route_func - local
⚡⚡⚡ Networking route_func - forward
⚡⚡⚡ Networking TCP: keepalive test
⚡⚡⚡ Networking UDP: socket
⚡⚡⚡ Networking tunnel: geneve basic test
⚡⚡⚡ Networking tunnel: gre basic
⚡⚡⚡ L2TP basic test
⚡⚡⚡ Networking tunnel: vxlan basic
⚡⚡⚡ Networking ipsec: basic netns - transport
⚡⚡⚡ Networking ipsec: basic netns - tunnel
⚡⚡⚡ Libkcapi AF_ALG test
⚡⚡⚡ pciutils: update pci ids test
⚡⚡⚡ ALSA PCM loopback test
⚡⚡⚡ ALSA Control (mixer) Userspace Element test
⚡⚡⚡ storage: SCSI VPD
🚧 ⚡⚡⚡ CIFS Connectathon
🚧 ⚡⚡⚡ POSIX pjd-fstest suites
🚧 ⚡⚡⚡ Firmware test suite
🚧 ⚡⚡⚡ jvm - jcstress tests
🚧 ⚡⚡⚡ Memory function: kaslr
🚧 ⚡⚡⚡ Ethernet drivers sanity
🚧 ⚡⚡⚡ Networking firewall: basic netfilter test
🚧 ⚡⚡⚡ audit: audit testsuite test
🚧 ⚡⚡⚡ trace: ftrace/tracer
🚧 ⚡⚡⚡ kdump - kexec_boot
Host 3:
✅ Boot test
✅ ACPI table test
✅ ACPI enabled test
✅ LTP
✅ Loopdev Sanity
✅ Memory: fork_mem
✅ Memory function: memfd_create
✅ AMTU (Abstract Machine Test Utility)
✅ Networking bridge: sanity
✅ Networking socket: fuzz
✅ Networking: igmp conformance test
✅ Networking route: pmtu
✅ Networking route_func - local
✅ Networking route_func - forward
✅ Networking TCP: keepalive test
✅ Networking UDP: socket
✅ Networking tunnel: geneve basic test
✅ Networking tunnel: gre basic
✅ L2TP basic test
✅ Networking tunnel: vxlan basic
✅ Networking ipsec: basic netns - transport
✅ Networking ipsec: basic netns - tunnel
✅ Libkcapi AF_ALG test
✅ pciutils: update pci ids test
✅ ALSA PCM loopback test
✅ ALSA Control (mixer) Userspace Element test
✅ storage: SCSI VPD
🚧 ✅ CIFS Connectathon
🚧 ✅ POSIX pjd-fstest suites
🚧 ✅ Firmware test suite
🚧 ✅ jvm - jcstress tests
🚧 ✅ Memory function: kaslr
🚧 ✅ Ethernet drivers sanity
🚧 ✅ Networking firewall: basic netfilter test
🚧 ✅ audit: audit testsuite test
🚧 ✅ trace: ftrace/tracer
🚧 ✅ kdump - kexec_boot
ppc64le:
Host 1:
⚡ Internal infrastructure issues prevented one or more tests (marked
with ⚡⚡⚡) from running on this architecture.
This is not the fault of the kernel that was tested.
⚡⚡⚡ Boot test
🚧 ⚡⚡⚡ kdump - sysrq-c
Host 2:
✅ Boot test
✅ selinux-policy: serge-testsuite
✅ storage: software RAID testing
🚧 ✅ Podman system integration test - as root
🚧 ✅ Podman system integration test - as user
🚧 ✅ xfstests - ext4
🚧 ✅ xfstests - xfs
🚧 ✅ xfstests - btrfs
🚧 ✅ IPMI driver test
🚧 ✅ IPMItool loop stress test
🚧 ✅ Storage blktests
🚧 ✅ Storage block - filesystem fio test
🚧 ✅ Storage block - queue scheduler test
🚧 ✅ Storage nvme - tcp
Host 3:
⚡ Internal infrastructure issues prevented one or more tests (marked
with ⚡⚡⚡) from running on this architecture.
This is not the fault of the kernel that was tested.
⚡⚡⚡ Boot test
⚡⚡⚡ LTP
⚡⚡⚡ Loopdev Sanity
⚡⚡⚡ Memory: fork_mem
⚡⚡⚡ Memory function: memfd_create
⚡⚡⚡ AMTU (Abstract Machine Test Utility)
⚡⚡⚡ Networking bridge: sanity
⚡⚡⚡ Networking socket: fuzz
⚡⚡⚡ Networking route: pmtu
⚡⚡⚡ Networking route_func - local
⚡⚡⚡ Networking route_func - forward
⚡⚡⚡ Networking TCP: keepalive test
⚡⚡⚡ Networking UDP: socket
⚡⚡⚡ Networking tunnel: geneve basic test
⚡⚡⚡ Networking tunnel: gre basic
⚡⚡⚡ L2TP basic test
⚡⚡⚡ Networking tunnel: vxlan basic
⚡⚡⚡ Networking ipsec: basic netns - tunnel
⚡⚡⚡ Libkcapi AF_ALG test
⚡⚡⚡ pciutils: update pci ids test
⚡⚡⚡ ALSA PCM loopback test
⚡⚡⚡ ALSA Control (mixer) Userspace Element test
🚧 ⚡⚡⚡ CIFS Connectathon
🚧 ⚡⚡⚡ POSIX pjd-fstest suites
🚧 ⚡⚡⚡ jvm - jcstress tests
🚧 ⚡⚡⚡ Memory function: kaslr
🚧 ⚡⚡⚡ Ethernet drivers sanity
🚧 ⚡⚡⚡ Networking firewall: basic netfilter test
🚧 ⚡⚡⚡ audit: audit testsuite test
🚧 ⚡⚡⚡ trace: ftrace/tracer
Host 4:
⚡ Internal infrastructure issues prevented one or more tests (marked
with ⚡⚡⚡) from running on this architecture.
This is not the fault of the kernel that was tested.
✅ Boot test
⚡⚡⚡ LTP
⚡⚡⚡ Loopdev Sanity
⚡⚡⚡ Memory: fork_mem
⚡⚡⚡ Memory function: memfd_create
⚡⚡⚡ AMTU (Abstract Machine Test Utility)
⚡⚡⚡ Networking bridge: sanity
⚡⚡⚡ Networking socket: fuzz
⚡⚡⚡ Networking route: pmtu
⚡⚡⚡ Networking route_func - local
⚡⚡⚡ Networking route_func - forward
⚡⚡⚡ Networking TCP: keepalive test
⚡⚡⚡ Networking UDP: socket
⚡⚡⚡ Networking tunnel: geneve basic test
⚡⚡⚡ Networking tunnel: gre basic
⚡⚡⚡ L2TP basic test
⚡⚡⚡ Networking tunnel: vxlan basic
⚡⚡⚡ Networking ipsec: basic netns - tunnel
⚡⚡⚡ Libkcapi AF_ALG test
⚡⚡⚡ pciutils: update pci ids test
⚡⚡⚡ ALSA PCM loopback test
⚡⚡⚡ ALSA Control (mixer) Userspace Element test
🚧 ⚡⚡⚡ CIFS Connectathon
🚧 ⚡⚡⚡ POSIX pjd-fstest suites
🚧 ⚡⚡⚡ jvm - jcstress tests
🚧 ⚡⚡⚡ Memory function: kaslr
🚧 ⚡⚡⚡ Ethernet drivers sanity
🚧 ⚡⚡⚡ Networking firewall: basic netfilter test
🚧 ⚡⚡⚡ audit: audit testsuite test
🚧 ⚡⚡⚡ trace: ftrace/tracer
Host 5:
✅ Boot test
🚧 ✅ kdump - sysrq-c
s390x:
Host 1:
✅ Boot test
✅ LTP
✅ Loopdev Sanity
✅ Memory: fork_mem
✅ Memory function: memfd_create
✅ AMTU (Abstract Machine Test Utility)
✅ Networking bridge: sanity
✅ Networking route: pmtu
✅ Networking route_func - local
✅ Networking route_func - forward
✅ Networking TCP: keepalive test
✅ Networking UDP: socket
✅ Networking tunnel: geneve basic test
✅ Networking tunnel: gre basic
✅ L2TP basic test
✅ Networking tunnel: vxlan basic
✅ Networking ipsec: basic netns - transport
✅ Networking ipsec: basic netns - tunnel
✅ Libkcapi AF_ALG test
🚧 ✅ CIFS Connectathon
🚧 ✅ POSIX pjd-fstest suites
🚧 ✅ jvm - jcstress tests
🚧 ✅ Memory function: kaslr
🚧 ✅ Ethernet drivers sanity
🚧 ✅ Networking firewall: basic netfilter test
🚧 ✅ audit: audit testsuite test
🚧 ✅ trace: ftrace/tracer
Host 2:
✅ Boot test
✅ selinux-policy: serge-testsuite
✅ stress: stress-ng
🚧 ✅ Podman system integration test - as root
🚧 ✅ Podman system integration test - as user
🚧 ✅ Storage blktests
🚧 ✅ Storage nvme - tcp
x86_64:
Host 1:
✅ Boot test
✅ ACPI table test
✅ LTP
✅ Loopdev Sanity
✅ Memory: fork_mem
✅ Memory function: memfd_create
✅ AMTU (Abstract Machine Test Utility)
✅ Networking bridge: sanity
✅ Networking socket: fuzz
✅ Networking: igmp conformance test
✅ Networking route: pmtu
✅ Networking route_func - local
✅ Networking route_func - forward
✅ Networking TCP: keepalive test
✅ Networking UDP: socket
✅ Networking tunnel: geneve basic test
✅ Networking tunnel: gre basic
✅ L2TP basic test
✅ Networking tunnel: vxlan basic
✅ Networking ipsec: basic netns - transport
✅ Networking ipsec: basic netns - tunnel
✅ Libkcapi AF_ALG test
✅ pciutils: sanity smoke test
✅ pciutils: update pci ids test
✅ ALSA PCM loopback test
✅ ALSA Control (mixer) Userspace Element test
✅ storage: SCSI VPD
🚧 ✅ CIFS Connectathon
🚧 ✅ POSIX pjd-fstest suites
🚧 ✅ Firmware test suite
🚧 ✅ jvm - jcstress tests
🚧 ✅ Memory function: kaslr
🚧 ✅ Ethernet drivers sanity
🚧 ✅ Networking firewall: basic netfilter test
🚧 ✅ audit: audit testsuite test
🚧 ✅ trace: ftrace/tracer
🚧 ✅ kdump - kexec_boot
Host 2:
⚡ Internal infrastructure issues prevented one or more tests (marked
with ⚡⚡⚡) from running on this architecture.
This is not the fault of the kernel that was tested.
✅ Boot test
✅ selinux-policy: serge-testsuite
✅ storage: software RAID testing
✅ stress: stress-ng
🚧 ❌ Podman system integration test - as root
🚧 ✅ Podman system integration test - as user
🚧 ❌ CPU: Frequency Driver Test
🚧 ✅ CPU: Idle Test
🚧 ✅ xfstests - ext4
🚧 ✅ xfstests - xfs
🚧 ✅ xfstests - btrfs
🚧 ⚡⚡⚡ IOMMU boot test
🚧 ⚡⚡⚡ IPMI driver test
🚧 ⚡⚡⚡ IPMItool loop stress test
🚧 ⚡⚡⚡ power-management: cpupower/sanity test
🚧 ⚡⚡⚡ Storage blktests
🚧 ⚡⚡⚡ Storage block - filesystem fio test
🚧 ⚡⚡⚡ Storage block - queue scheduler test
🚧 ⚡⚡⚡ Storage nvme - tcp
Host 3:
✅ Boot test
🚧 ✅ kdump - sysrq-c
🚧 ✅ kdump - file-load
Test sources: https://gitlab.com/cki-project/kernel-tests
💚 Pull requests are welcome for new tests or improvements to existing tests!
Aborted tests
-------------
Tests that didn't complete running successfully are marked with ⚡⚡⚡.
If this was caused by an infrastructure issue, we try to mark that
explicitly in the report.
Waived tests
------------
If the test run included waived tests, they are marked with 🚧. Such tests are
executed but their results are not taken into account. Tests are waived when
their results are not reliable enough, e.g. when they're just introduced or are
being fixed.
Testing timeout
---------------
We aim to provide a report within reasonable timeframe. Tests that haven't
finished running yet are marked with ⏱.
Hello,
We ran automated tests on a recent commit from this kernel tree:
Kernel repo: https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux-stable-rc.git
Commit: 461b89cf49c1 - perf/core: Fix a memory leak in perf_event_parse_addr_filter()
The results of these automated tests are provided below.
Overall result: PASSED
Merge: OK
Compile: OK
Tests: OK
All kernel binaries, config files, and logs are available for download here:
https://arr-cki-prod-datawarehouse-public.s3.amazonaws.com/index.html?prefi…
Please reply to this email if you have any questions about the tests that we
ran or if you have any suggestions on how to make future tests more effective.
,-. ,-.
( C ) ( K ) Continuous
`-',-.`-' Kernel
( I ) Integration
`-'
______________________________________________________________________________
Compile testing
---------------
We compiled the kernel for 4 architectures:
aarch64:
make options: make -j30 INSTALL_MOD_STRIP=1 targz-pkg
ppc64le:
make options: make -j30 INSTALL_MOD_STRIP=1 targz-pkg
s390x:
make options: make -j30 INSTALL_MOD_STRIP=1 targz-pkg
x86_64:
make options: make -j30 INSTALL_MOD_STRIP=1 targz-pkg
Hardware testing
----------------
We booted each kernel and ran the following tests:
aarch64:
Host 1:
⚡ Internal infrastructure issues prevented one or more tests (marked
with ⚡⚡⚡) from running on this architecture.
This is not the fault of the kernel that was tested.
✅ Boot test
✅ selinux-policy: serge-testsuite
✅ storage: software RAID testing
✅ stress: stress-ng
🚧 ✅ Podman system integration test - as root
🚧 ✅ Podman system integration test - as user
🚧 ✅ xfstests - ext4
🚧 ✅ xfstests - xfs
🚧 ✅ xfstests - btrfs
🚧 ✅ IPMI driver test
🚧 ✅ IPMItool loop stress test
🚧 ✅ Storage blktests
🚧 ✅ Storage block - filesystem fio test
🚧 ⚡⚡⚡ Storage block - queue scheduler test
🚧 ⚡⚡⚡ Storage nvme - tcp
Host 2:
✅ Boot test
✅ ACPI table test
✅ ACPI enabled test
✅ LTP
✅ Loopdev Sanity
✅ Memory: fork_mem
✅ Memory function: memfd_create
✅ AMTU (Abstract Machine Test Utility)
✅ Networking bridge: sanity
✅ Networking socket: fuzz
✅ Networking: igmp conformance test
✅ Networking route: pmtu
✅ Networking route_func - local
✅ Networking route_func - forward
✅ Networking TCP: keepalive test
✅ Networking UDP: socket
✅ Networking tunnel: geneve basic test
✅ Networking tunnel: gre basic
✅ L2TP basic test
✅ Networking tunnel: vxlan basic
✅ Networking ipsec: basic netns - transport
✅ Networking ipsec: basic netns - tunnel
✅ Libkcapi AF_ALG test
✅ pciutils: update pci ids test
✅ ALSA PCM loopback test
✅ ALSA Control (mixer) Userspace Element test
✅ storage: SCSI VPD
🚧 ✅ CIFS Connectathon
🚧 ✅ POSIX pjd-fstest suites
🚧 ✅ Firmware test suite
🚧 ✅ jvm - jcstress tests
🚧 ✅ Memory function: kaslr
🚧 ✅ Ethernet drivers sanity
🚧 ✅ Networking firewall: basic netfilter test
🚧 ✅ audit: audit testsuite test
🚧 ✅ trace: ftrace/tracer
🚧 ✅ kdump - kexec_boot
ppc64le:
Host 1:
⚡ Internal infrastructure issues prevented one or more tests (marked
with ⚡⚡⚡) from running on this architecture.
This is not the fault of the kernel that was tested.
⚡⚡⚡ Boot test
🚧 ⚡⚡⚡ kdump - sysrq-c
Host 2:
⚡ Internal infrastructure issues prevented one or more tests (marked
with ⚡⚡⚡) from running on this architecture.
This is not the fault of the kernel that was tested.
⚡⚡⚡ Boot test
⚡⚡⚡ LTP
⚡⚡⚡ Loopdev Sanity
⚡⚡⚡ Memory: fork_mem
⚡⚡⚡ Memory function: memfd_create
⚡⚡⚡ AMTU (Abstract Machine Test Utility)
⚡⚡⚡ Networking bridge: sanity
⚡⚡⚡ Networking socket: fuzz
⚡⚡⚡ Networking route: pmtu
⚡⚡⚡ Networking route_func - local
⚡⚡⚡ Networking route_func - forward
⚡⚡⚡ Networking TCP: keepalive test
⚡⚡⚡ Networking UDP: socket
⚡⚡⚡ Networking tunnel: geneve basic test
⚡⚡⚡ Networking tunnel: gre basic
⚡⚡⚡ L2TP basic test
⚡⚡⚡ Networking tunnel: vxlan basic
⚡⚡⚡ Networking ipsec: basic netns - tunnel
⚡⚡⚡ Libkcapi AF_ALG test
⚡⚡⚡ pciutils: update pci ids test
⚡⚡⚡ ALSA PCM loopback test
⚡⚡⚡ ALSA Control (mixer) Userspace Element test
🚧 ⚡⚡⚡ CIFS Connectathon
🚧 ⚡⚡⚡ POSIX pjd-fstest suites
🚧 ⚡⚡⚡ jvm - jcstress tests
🚧 ⚡⚡⚡ Memory function: kaslr
🚧 ⚡⚡⚡ Ethernet drivers sanity
🚧 ⚡⚡⚡ Networking firewall: basic netfilter test
🚧 ⚡⚡⚡ audit: audit testsuite test
🚧 ⚡⚡⚡ trace: ftrace/tracer
Host 3:
⚡ Internal infrastructure issues prevented one or more tests (marked
with ⚡⚡⚡) from running on this architecture.
This is not the fault of the kernel that was tested.
⚡⚡⚡ Boot test
⚡⚡⚡ selinux-policy: serge-testsuite
⚡⚡⚡ storage: software RAID testing
🚧 ⚡⚡⚡ Podman system integration test - as root
🚧 ⚡⚡⚡ Podman system integration test - as user
🚧 ⚡⚡⚡ xfstests - ext4
🚧 ⚡⚡⚡ xfstests - xfs
🚧 ⚡⚡⚡ xfstests - btrfs
🚧 ⚡⚡⚡ IPMI driver test
🚧 ⚡⚡⚡ IPMItool loop stress test
🚧 ⚡⚡⚡ Storage blktests
🚧 ⚡⚡⚡ Storage block - filesystem fio test
🚧 ⚡⚡⚡ Storage block - queue scheduler test
🚧 ⚡⚡⚡ Storage nvme - tcp
Host 4:
⚡ Internal infrastructure issues prevented one or more tests (marked
with ⚡⚡⚡) from running on this architecture.
This is not the fault of the kernel that was tested.
⚡⚡⚡ Boot test
⚡⚡⚡ LTP
⚡⚡⚡ Loopdev Sanity
⚡⚡⚡ Memory: fork_mem
⚡⚡⚡ Memory function: memfd_create
⚡⚡⚡ AMTU (Abstract Machine Test Utility)
⚡⚡⚡ Networking bridge: sanity
⚡⚡⚡ Networking socket: fuzz
⚡⚡⚡ Networking route: pmtu
⚡⚡⚡ Networking route_func - local
⚡⚡⚡ Networking route_func - forward
⚡⚡⚡ Networking TCP: keepalive test
⚡⚡⚡ Networking UDP: socket
⚡⚡⚡ Networking tunnel: geneve basic test
⚡⚡⚡ Networking tunnel: gre basic
⚡⚡⚡ L2TP basic test
⚡⚡⚡ Networking tunnel: vxlan basic
⚡⚡⚡ Networking ipsec: basic netns - tunnel
⚡⚡⚡ Libkcapi AF_ALG test
⚡⚡⚡ pciutils: update pci ids test
⚡⚡⚡ ALSA PCM loopback test
⚡⚡⚡ ALSA Control (mixer) Userspace Element test
🚧 ⚡⚡⚡ CIFS Connectathon
🚧 ⚡⚡⚡ POSIX pjd-fstest suites
🚧 ⚡⚡⚡ jvm - jcstress tests
🚧 ⚡⚡⚡ Memory function: kaslr
🚧 ⚡⚡⚡ Ethernet drivers sanity
🚧 ⚡⚡⚡ Networking firewall: basic netfilter test
🚧 ⚡⚡⚡ audit: audit testsuite test
🚧 ⚡⚡⚡ trace: ftrace/tracer
Host 5:
⚡ Internal infrastructure issues prevented one or more tests (marked
with ⚡⚡⚡) from running on this architecture.
This is not the fault of the kernel that was tested.
⚡⚡⚡ Boot test
🚧 ⚡⚡⚡ kdump - sysrq-c
s390x:
Host 1:
✅ Boot test
✅ LTP
✅ Loopdev Sanity
✅ Memory: fork_mem
✅ Memory function: memfd_create
✅ AMTU (Abstract Machine Test Utility)
✅ Networking bridge: sanity
✅ Networking route: pmtu
✅ Networking route_func - local
✅ Networking route_func - forward
✅ Networking TCP: keepalive test
✅ Networking UDP: socket
✅ Networking tunnel: geneve basic test
✅ Networking tunnel: gre basic
✅ L2TP basic test
✅ Networking tunnel: vxlan basic
✅ Networking ipsec: basic netns - transport
✅ Networking ipsec: basic netns - tunnel
✅ Libkcapi AF_ALG test
🚧 ✅ CIFS Connectathon
🚧 ✅ POSIX pjd-fstest suites
🚧 ✅ jvm - jcstress tests
🚧 ✅ Memory function: kaslr
🚧 ✅ Ethernet drivers sanity
🚧 ✅ Networking firewall: basic netfilter test
🚧 ✅ audit: audit testsuite test
🚧 ✅ trace: ftrace/tracer
Host 2:
✅ Boot test
✅ selinux-policy: serge-testsuite
✅ stress: stress-ng
🚧 ✅ Podman system integration test - as root
🚧 ✅ Podman system integration test - as user
🚧 ✅ Storage blktests
🚧 ✅ Storage nvme - tcp
x86_64:
Host 1:
⚡ Internal infrastructure issues prevented one or more tests (marked
with ⚡⚡⚡) from running on this architecture.
This is not the fault of the kernel that was tested.
⚡⚡⚡ Boot test
⚡⚡⚡ ACPI table test
⚡⚡⚡ LTP
⚡⚡⚡ Loopdev Sanity
⚡⚡⚡ Memory: fork_mem
⚡⚡⚡ Memory function: memfd_create
⚡⚡⚡ AMTU (Abstract Machine Test Utility)
⚡⚡⚡ Networking bridge: sanity
⚡⚡⚡ Networking socket: fuzz
⚡⚡⚡ Networking: igmp conformance test
⚡⚡⚡ Networking route: pmtu
⚡⚡⚡ Networking route_func - local
⚡⚡⚡ Networking route_func - forward
⚡⚡⚡ Networking TCP: keepalive test
⚡⚡⚡ Networking UDP: socket
⚡⚡⚡ Networking tunnel: geneve basic test
⚡⚡⚡ Networking tunnel: gre basic
⚡⚡⚡ L2TP basic test
⚡⚡⚡ Networking tunnel: vxlan basic
⚡⚡⚡ Networking ipsec: basic netns - transport
⚡⚡⚡ Networking ipsec: basic netns - tunnel
⚡⚡⚡ Libkcapi AF_ALG test
⚡⚡⚡ pciutils: sanity smoke test
⚡⚡⚡ pciutils: update pci ids test
⚡⚡⚡ ALSA PCM loopback test
⚡⚡⚡ ALSA Control (mixer) Userspace Element test
⚡⚡⚡ storage: SCSI VPD
🚧 ⚡⚡⚡ CIFS Connectathon
🚧 ⚡⚡⚡ POSIX pjd-fstest suites
🚧 ⚡⚡⚡ Firmware test suite
🚧 ⚡⚡⚡ jvm - jcstress tests
🚧 ⚡⚡⚡ Memory function: kaslr
🚧 ⚡⚡⚡ Ethernet drivers sanity
🚧 ⚡⚡⚡ Networking firewall: basic netfilter test
🚧 ⚡⚡⚡ audit: audit testsuite test
🚧 ⚡⚡⚡ trace: ftrace/tracer
🚧 ⚡⚡⚡ kdump - kexec_boot
Host 2:
✅ Boot test
🚧 ✅ kdump - sysrq-c
🚧 ✅ kdump - file-load
Host 3:
⚡ Internal infrastructure issues prevented one or more tests (marked
with ⚡⚡⚡) from running on this architecture.
This is not the fault of the kernel that was tested.
✅ Boot test
✅ selinux-policy: serge-testsuite
✅ storage: software RAID testing
✅ stress: stress-ng
🚧 ✅ Podman system integration test - as root
🚧 ✅ Podman system integration test - as user
🚧 ❌ CPU: Frequency Driver Test
🚧 ✅ CPU: Idle Test
🚧 ✅ xfstests - ext4
🚧 ✅ xfstests - xfs
🚧 ✅ xfstests - btrfs
🚧 ⚡⚡⚡ IOMMU boot test
🚧 ⚡⚡⚡ IPMI driver test
🚧 ⚡⚡⚡ IPMItool loop stress test
🚧 ⚡⚡⚡ power-management: cpupower/sanity test
🚧 ⚡⚡⚡ Storage blktests
🚧 ⚡⚡⚡ Storage block - filesystem fio test
🚧 ⚡⚡⚡ Storage block - queue scheduler test
🚧 ⚡⚡⚡ Storage nvme - tcp
Host 4:
✅ Boot test
✅ ACPI table test
✅ LTP
✅ Loopdev Sanity
✅ Memory: fork_mem
✅ Memory function: memfd_create
✅ AMTU (Abstract Machine Test Utility)
✅ Networking bridge: sanity
✅ Networking socket: fuzz
✅ Networking: igmp conformance test
✅ Networking route: pmtu
✅ Networking route_func - local
✅ Networking route_func - forward
✅ Networking TCP: keepalive test
✅ Networking UDP: socket
✅ Networking tunnel: geneve basic test
✅ Networking tunnel: gre basic
✅ L2TP basic test
✅ Networking tunnel: vxlan basic
✅ Networking ipsec: basic netns - transport
✅ Networking ipsec: basic netns - tunnel
✅ Libkcapi AF_ALG test
✅ pciutils: sanity smoke test
✅ pciutils: update pci ids test
✅ ALSA PCM loopback test
✅ ALSA Control (mixer) Userspace Element test
✅ storage: SCSI VPD
🚧 ✅ CIFS Connectathon
🚧 ✅ POSIX pjd-fstest suites
🚧 ✅ Firmware test suite
🚧 ✅ jvm - jcstress tests
🚧 ✅ Memory function: kaslr
🚧 ✅ Ethernet drivers sanity
🚧 ✅ Networking firewall: basic netfilter test
🚧 ✅ audit: audit testsuite test
🚧 ✅ trace: ftrace/tracer
🚧 ✅ kdump - kexec_boot
Test sources: https://gitlab.com/cki-project/kernel-tests
💚 Pull requests are welcome for new tests or improvements to existing tests!
Aborted tests
-------------
Tests that didn't complete running successfully are marked with ⚡⚡⚡.
If this was caused by an infrastructure issue, we try to mark that
explicitly in the report.
Waived tests
------------
If the test run included waived tests, they are marked with 🚧. Such tests are
executed but their results are not taken into account. Tests are waived when
their results are not reliable enough, e.g. when they're just introduced or are
being fixed.
Testing timeout
---------------
We aim to provide a report within reasonable timeframe. Tests that haven't
finished running yet are marked with ⏱.
Bugzilla: https://bugzilla.redhat.com/show_bug.cgi?id=1844300
Upstream status: https://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux.git/commit/?…
Build info: https://brewweb.engineering.redhat.com/brew/taskinfo?taskID=32573686
CVE: CVE-2020-8694
author Len Brown <len.brown(a)intel.com> 2020-11-10 13:00:00 -0800
committer Len Brown <len.brown(a)intel.com> 2020-11-10 11:40:57 -0500
commit 949dd0104c496fa7c14991a23c03c62e44637e71 (patch)
tree a90cbfb8ceb195e7160105a272122f97bab99980
parent 3d7772ea5602b88c7c7f0a50d512171a2eed6659 (diff)
download linux-949dd0104c496fa7c14991a23c03c62e44637e71.tar.gz
powercap: restrict energy meter to root access
Remove non-privileged user access to power data contained in
/sys/class/powercap/intel-rapl*/*/energy_uj
Non-privileged users currently have read access to power data and can
use this data to form a security attack. Some privileged
drivers/applications need read access to this data, but don't expose it
to non-privileged users.
For example, thermald uses this data to ensure that power management
works correctly. Thus removing non-privileged access is preferred over
completely disabling this power reporting capability with
CONFIG_INTEL_RAPL=n.
Fixes: 95677a9a3847 ("PowerCap: Fix mode for energy counter")
Signed-off-by: Len Brown <len.brown(a)intel.com>
Cc: stable(a)vger.kernel.org
Signed-off-by: Donghai Qiao <dqiao(a)redhat.com>
---
drivers/powercap/powercap_sys.c | 4 ++--
1 file changed, 2 insertions(+), 2 deletions(-)
diff --git a/drivers/powercap/powercap_sys.c b/drivers/powercap/powercap_sys.c
index 05ddf8be64a..db69be2892a 100644
--- a/drivers/powercap/powercap_sys.c
+++ b/drivers/powercap/powercap_sys.c
@@ -379,9 +379,9 @@ static void create_power_zone_common_attributes(
&dev_attr_max_energy_range_uj.attr;
if (power_zone->ops->get_energy_uj) {
if (power_zone->ops->reset_energy_uj)
- dev_attr_energy_uj.attr.mode = S_IWUSR | S_IRUGO;
+ dev_attr_energy_uj.attr.mode = S_IWUSR | S_IRUSR;
else
- dev_attr_energy_uj.attr.mode = S_IRUGO;
+ dev_attr_energy_uj.attr.mode = S_IRUSR;
power_zone->zone_dev_attrs[count++] =
&dev_attr_energy_uj.attr;
}
--
2.18.1
Bugzilla: https://bugzilla.redhat.com/show_bug.cgi?id=1844300
Upstream status: https://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux.git/commit/?…
Build info: https://brewweb.engineering.redhat.com/brew/taskinfo?taskID=32573686
CVE: CVE-2020-8694
author Len Brown <len.brown(a)intel.com> 2020-11-10 13:00:00 -0800
committer Len Brown <len.brown(a)intel.com> 2020-11-10 11:40:57 -0500
commit 949dd0104c496fa7c14991a23c03c62e44637e71 (patch)
tree a90cbfb8ceb195e7160105a272122f97bab99980
parent 3d7772ea5602b88c7c7f0a50d512171a2eed6659 (diff)
download linux-949dd0104c496fa7c14991a23c03c62e44637e71.tar.gz
powercap: restrict energy meter to root access
Remove non-privileged user access to power data contained in
/sys/class/powercap/intel-rapl*/*/energy_uj
Non-privileged users currently have read access to power data and can
use this data to form a security attack. Some privileged
drivers/applications need read access to this data, but don't expose it
to non-privileged users.
For example, thermald uses this data to ensure that power management
works correctly. Thus removing non-privileged access is preferred over
completely disabling this power reporting capability with
CONFIG_INTEL_RAPL=n.
Fixes: 95677a9a3847 ("PowerCap: Fix mode for energy counter")
Signed-off-by: Len Brown <len.brown(a)intel.com>
Cc: stable(a)vger.kernel.org
Signed-off-by: Donghai Qiao <dqiao(a)redhat.com>
---
drivers/powercap/powercap_sys.c | 4 ++--
1 file changed, 2 insertions(+), 2 deletions(-)
diff --git a/drivers/powercap/powercap_sys.c b/drivers/powercap/powercap_sys.c
index 05ddf8be64a..db69be2892a 100644
--- a/drivers/powercap/powercap_sys.c
+++ b/drivers/powercap/powercap_sys.c
@@ -379,9 +379,9 @@ static void create_power_zone_common_attributes(
&dev_attr_max_energy_range_uj.attr;
if (power_zone->ops->get_energy_uj) {
if (power_zone->ops->reset_energy_uj)
- dev_attr_energy_uj.attr.mode = S_IWUSR | S_IRUGO;
+ dev_attr_energy_uj.attr.mode = S_IWUSR | S_IRUSR;
else
- dev_attr_energy_uj.attr.mode = S_IRUGO;
+ dev_attr_energy_uj.attr.mode = S_IRUSR;
power_zone->zone_dev_attrs[count++] =
&dev_attr_energy_uj.attr;
}
--
2.18.1
The patch titled
Subject: mm/userfaultfd: do not access vma->vm_mm after calling handle_userfault()
has been added to the -mm tree. Its filename is
mm-userfaultfd-do-not-access-vma-vm_mm-after-calling-handle_userfault.patch
This patch should soon appear at
https://ozlabs.org/~akpm/mmots/broken-out/mm-userfaultfd-do-not-access-vma-…
and later at
https://ozlabs.org/~akpm/mmotm/broken-out/mm-userfaultfd-do-not-access-vma-…
Before you just go and hit "reply", please:
a) Consider who else should be cc'ed
b) Prefer to cc a suitable mailing list as well
c) Ideally: find the original patch on the mailing list and do a
reply-to-all to that, adding suitable additional cc's
*** Remember to use Documentation/process/submit-checklist.rst when testing your code ***
The -mm tree is included into linux-next and is updated
there every 3-4 working days
------------------------------------------------------
From: Gerald Schaefer <gerald.schaefer(a)linux.ibm.com>
Subject: mm/userfaultfd: do not access vma->vm_mm after calling handle_userfault()
Alexander reported a syzkaller / KASAN finding on s390, see below for
complete output.
In do_huge_pmd_anonymous_page(), the pre-allocated pagetable will be freed
in some cases. In the case of userfaultfd_missing(), this will happen
after calling handle_userfault(), which might have released the mmap_lock.
Therefore, the following pte_free(vma->vm_mm, pgtable) will access an
unstable vma->vm_mm, which could have been freed or re-used already.
For all architectures other than s390 this will go w/o any negative
impact, because pte_free() simply frees the page and ignores the passed-in
mm. The implementation for SPARC32 would also access mm->page_table_lock
for pte_free(), but there is no THP support in SPARC32, so the buggy code
path will not be used there.
For s390, the mm->context.pgtable_list is being used to maintain the 2K
pagetable fragments, and operating on an already freed or even re-used mm
could result in various more or less subtle bugs due to list / pagetable
corruption.
Fix this by calling pte_free() before handle_userfault(), similar to how
it is already done in __do_huge_pmd_anonymous_page() for the WRITE /
non-huge_zero_page case.
Commit 6b251fc96cf2c ("userfaultfd: call handle_userfault() for
userfaultfd_missing() faults") actually introduced both, the
do_huge_pmd_anonymous_page() and also __do_huge_pmd_anonymous_page()
changes wrt to calling handle_userfault(), but only in the latter case it
put the pte_free() before calling handle_userfault().
==================================================================
BUG: KASAN: use-after-free in do_huge_pmd_anonymous_page+0xcda/0xd90 mm/huge_memory.c:744
Read of size 8 at addr 00000000962d6988 by task syz-executor.0/9334
CPU: 1 PID: 9334 Comm: syz-executor.0 Not tainted 5.10.0-rc1-syzkaller-07083-g4c9720875573 #0
Hardware name: IBM 3906 M04 701 (KVM/Linux)
Call Trace:
[<00000000aa0a7a1c>] unwind_start arch/s390/include/asm/unwind.h:65 [inline]
[<00000000aa0a7a1c>] show_stack+0x174/0x220 arch/s390/kernel/dumpstack.c:135
[<00000000aa105952>] __dump_stack lib/dump_stack.c:77 [inline]
[<00000000aa105952>] dump_stack+0x262/0x2e8 lib/dump_stack.c:118
[<00000000aa0b484e>] print_address_description.constprop.0+0x5e/0x218 mm/kasan/report.c:385
[<00000000a61f13aa>] __kasan_report mm/kasan/report.c:545 [inline]
[<00000000a61f13aa>] kasan_report+0x11a/0x168 mm/kasan/report.c:562
[<00000000a620d782>] do_huge_pmd_anonymous_page+0xcda/0xd90 mm/huge_memory.c:744
[<00000000a610632e>] create_huge_pmd mm/memory.c:4256 [inline]
[<00000000a610632e>] __handle_mm_fault+0xe6e/0x1068 mm/memory.c:4480
[<00000000a61067b0>] handle_mm_fault+0x288/0x748 mm/memory.c:4607
[<00000000a598b55c>] do_exception+0x394/0xae0 arch/s390/mm/fault.c:479
[<00000000a598d7c4>] do_dat_exception+0x34/0x80 arch/s390/mm/fault.c:567
[<00000000aa124e5e>] pgm_check_handler+0x1da/0x22c arch/s390/kernel/entry.S:706
[<00000000aa0a6902>] copy_from_user_mvcos arch/s390/lib/uaccess.c:111 [inline]
[<00000000aa0a6902>] raw_copy_from_user+0x3a/0x88 arch/s390/lib/uaccess.c:174
[<00000000a7c24668>] _copy_from_user+0x48/0xa8 lib/usercopy.c:16
[<00000000a5b0b2a8>] copy_from_user include/linux/uaccess.h:192 [inline]
[<00000000a5b0b2a8>] __do_sys_sigaltstack kernel/signal.c:4064 [inline]
[<00000000a5b0b2a8>] __s390x_sys_sigaltstack+0xc8/0x240 kernel/signal.c:4060
[<00000000aa124a9c>] system_call+0xe0/0x28c arch/s390/kernel/entry.S:415
Allocated by task 9334:
stack_trace_save+0xbe/0xf0 kernel/stacktrace.c:121
kasan_save_stack+0x30/0x60 mm/kasan/common.c:48
kasan_set_track mm/kasan/common.c:56 [inline]
__kasan_kmalloc.constprop.0+0xd0/0xe8 mm/kasan/common.c:461
slab_post_alloc_hook mm/slab.h:526 [inline]
slab_alloc_node mm/slub.c:2891 [inline]
slab_alloc mm/slub.c:2899 [inline]
kmem_cache_alloc+0x118/0x348 mm/slub.c:2904
vm_area_dup+0x9c/0x2b8 kernel/fork.c:356
__split_vma+0xba/0x560 mm/mmap.c:2742
split_vma+0xca/0x108 mm/mmap.c:2800
mlock_fixup+0x4ae/0x600 mm/mlock.c:550
apply_vma_lock_flags+0x2c6/0x398 mm/mlock.c:619
do_mlock+0x1aa/0x718 mm/mlock.c:711
__do_sys_mlock2 mm/mlock.c:738 [inline]
__s390x_sys_mlock2+0x86/0xa8 mm/mlock.c:728
system_call+0xe0/0x28c arch/s390/kernel/entry.S:415
Freed by task 9333:
stack_trace_save+0xbe/0xf0 kernel/stacktrace.c:121
kasan_save_stack+0x30/0x60 mm/kasan/common.c:48
kasan_set_track+0x32/0x48 mm/kasan/common.c:56
kasan_set_free_info+0x34/0x50 mm/kasan/generic.c:355
__kasan_slab_free+0x11e/0x190 mm/kasan/common.c:422
slab_free_hook mm/slub.c:1544 [inline]
slab_free_freelist_hook mm/slub.c:1577 [inline]
slab_free mm/slub.c:3142 [inline]
kmem_cache_free+0x7c/0x4b8 mm/slub.c:3158
__vma_adjust+0x7b2/0x2508 mm/mmap.c:960
vma_merge+0x87e/0xce0 mm/mmap.c:1209
userfaultfd_release+0x412/0x6b8 fs/userfaultfd.c:868
__fput+0x22c/0x7a8 fs/file_table.c:281
task_work_run+0x200/0x320 kernel/task_work.c:151
tracehook_notify_resume include/linux/tracehook.h:188 [inline]
do_notify_resume+0x100/0x148 arch/s390/kernel/signal.c:538
system_call+0xe6/0x28c arch/s390/kernel/entry.S:416
The buggy address belongs to the object at 00000000962d6948
which belongs to the cache vm_area_struct of size 200
The buggy address is located 64 bytes inside of
200-byte region [00000000962d6948, 00000000962d6a10)
The buggy address belongs to the page:
page:00000000313a09fe refcount:1 mapcount:0 mapping:0000000000000000 index:0x0 pfn:0x962d6
flags: 0x3ffff00000000200(slab)
raw: 3ffff00000000200 000040000257e080 0000000c0000000c 000000008020ba00
raw: 0000000000000000 000f001e00000000 ffffffff00000001 0000000096959501
page dumped because: kasan: bad access detected
page->mem_cgroup:0000000096959501
Memory state around the buggy address:
00000000962d6880: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
00000000962d6900: 00 fc fc fc fc fc fc fc fc fa fb fb fb fb fb fb
>00000000962d6980: fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb
^
00000000962d6a00: fb fb fc fc fc fc fc fc fc fc 00 00 00 00 00 00
00000000962d6a80: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
==================================================================
Link: https://lkml.kernel.org/r/20201110190329.11920-1-gerald.schaefer@linux.ibm.…
Fixes: 6b251fc96cf2c ("userfaultfd: call handle_userfault() for userfaultfd_missing() faults")
Signed-off-by: Gerald Schaefer <gerald.schaefer(a)linux.ibm.com>
Reported-by: Alexander Egorenkov <egorenar(a)linux.ibm.com>
Cc: Andrea Arcangeli <aarcange(a)redhat.com>
Cc: Heiko Carstens <hca(a)linux.ibm.com>
Cc: <stable(a)vger.kernel.org> [4.3+]
Signed-off-by: Andrew Morton <akpm(a)linux-foundation.org>
---
mm/huge_memory.c | 9 ++++-----
1 file changed, 4 insertions(+), 5 deletions(-)
--- a/mm/huge_memory.c~mm-userfaultfd-do-not-access-vma-vm_mm-after-calling-handle_userfault
+++ a/mm/huge_memory.c
@@ -710,7 +710,6 @@ vm_fault_t do_huge_pmd_anonymous_page(st
transparent_hugepage_use_zero_page()) {
pgtable_t pgtable;
struct page *zero_page;
- bool set;
vm_fault_t ret;
pgtable = pte_alloc_one(vma->vm_mm);
if (unlikely(!pgtable))
@@ -723,25 +722,25 @@ vm_fault_t do_huge_pmd_anonymous_page(st
}
vmf->ptl = pmd_lock(vma->vm_mm, vmf->pmd);
ret = 0;
- set = false;
if (pmd_none(*vmf->pmd)) {
ret = check_stable_address_space(vma->vm_mm);
if (ret) {
spin_unlock(vmf->ptl);
+ pte_free(vma->vm_mm, pgtable);
} else if (userfaultfd_missing(vma)) {
spin_unlock(vmf->ptl);
+ pte_free(vma->vm_mm, pgtable);
ret = handle_userfault(vmf, VM_UFFD_MISSING);
VM_BUG_ON(ret & VM_FAULT_FALLBACK);
} else {
set_huge_zero_page(pgtable, vma->vm_mm, vma,
haddr, vmf->pmd, zero_page);
spin_unlock(vmf->ptl);
- set = true;
}
- } else
+ } else {
spin_unlock(vmf->ptl);
- if (!set)
pte_free(vma->vm_mm, pgtable);
+ }
return ret;
}
gfp = alloc_hugepage_direct_gfpmask(vma);
_
Patches currently in -mm which might be from gerald.schaefer(a)linux.ibm.com are
mm-userfaultfd-do-not-access-vma-vm_mm-after-calling-handle_userfault.patch
This reverts commit 00fdec98d9881bf5173af09aebd353ab3b9ac729.
(but only from 5.2 and prior kernels)
The original commit was a preventive fix based on code-review and was
auto-picked for stable back-port (for better or worse).
It was OK for v5.3+ kernels, but turned up needing an implicit change
68e5c6f073bcf70 "(ARC: entry: EV_Trap expects r10 (vs. r9) to have
exception cause)" merged in v5.3 which itself was not backported.
So to summarize the stable backport of this patch for v5.2 and prior
kernels is busted and it won't boot.
The obvious solution is backport 68e5c6f073bcf70 but that is a pain as
it doesn't revert cleanly and each of affected kernels (so far v4.19,
v4.14, v4.9, v4.4) needs a slightly different massaged varaint.
So the easier fix is to simply revert the backport from 5.2 and prior.
The issue was not a big deal as it would cause strace to sporadically
not work correctly.
Waldemar Brodkorb first reported this when running ARC uClibc regressions
on latest stable kernels (with offending backport). Once he bisected it,
the analysis was trivial, so thx to him for this.
Reported-by: Waldemar Brodkorb <wbx(a)uclibc-ng.org>
Bisected-by: Waldemar Brodkorb <wbx(a)uclibc-ng.org>
Cc: stable <stable(a)vger.kernel.org> # 5.2 and prior
Signed-off-by: Vineet Gupta <vgupta(a)synopsys.com>
---
arch/arc/kernel/entry.S | 16 +++++++++++-----
1 file changed, 11 insertions(+), 5 deletions(-)
diff --git a/arch/arc/kernel/entry.S b/arch/arc/kernel/entry.S
index ea00c8a17f07..60406ec62eb8 100644
--- a/arch/arc/kernel/entry.S
+++ b/arch/arc/kernel/entry.S
@@ -165,6 +165,7 @@ END(EV_Extension)
tracesys:
; save EFA in case tracer wants the PC of traced task
; using ERET won't work since next-PC has already committed
+ lr r12, [efa]
GET_CURR_TASK_FIELD_PTR TASK_THREAD, r11
st r12, [r11, THREAD_FAULT_ADDR] ; thread.fault_address
@@ -207,9 +208,15 @@ tracesys_exit:
; Breakpoint TRAP
; ---------------------------------------------
trap_with_param:
- mov r0, r12 ; EFA in case ptracer/gdb wants stop_pc
+
+ ; stop_pc info by gdb needs this info
+ lr r0, [efa]
mov r1, sp
+ ; Now that we have read EFA, it is safe to do "fake" rtie
+ ; and get out of CPU exception mode
+ FAKE_RET_FROM_EXCPN
+
; Save callee regs in case gdb wants to have a look
; SP will grow up by size of CALLEE Reg-File
; NOTE: clobbers r12
@@ -236,10 +243,6 @@ ENTRY(EV_Trap)
EXCEPTION_PROLOGUE
- lr r12, [efa]
-
- FAKE_RET_FROM_EXCPN
-
;============ TRAP 1 :breakpoints
; Check ECR for trap with arg (PROLOGUE ensures r10 has ECR)
bmsk.f 0, r10, 7
@@ -247,6 +250,9 @@ ENTRY(EV_Trap)
;============ TRAP (no param): syscall top level
+ ; First return from Exception to pure K mode (Exception/IRQs renabled)
+ FAKE_RET_FROM_EXCPN
+
; If syscall tracing ongoing, invoke pre-post-hooks
GET_CURR_THR_INFO_FLAGS r10
btst r10, TIF_SYSCALL_TRACE
--
2.25.1
Debounce filter setting should be independent from IRQ type setting
because according to the ACPI specs, there are separate arguments for
specifying debounce timeout and IRQ type in GpioIo() and GpioInt().
This will fix broken touchpads for laptops whose BIOS set the debounce
timeout to a relatively large value. For example, the BIOS of Lenovo
Legion-5 AMD gaming laptops including 15ARH05 (R7000) and R7000P set
the debounce timeout to 124.8ms. This led to the kernel receiving only
~7 HID reports per second from the Synaptics touchpad
(MSFT0001:00 06CB:7F28). Existing touchpads like [1][2] are not troubled
by this bug because the debounce timeout has been set to 0 by the BIOS
before enabling the debounce filter in setting IRQ type.
[1] https://github.com/Syniurge/i2c-amd-mp2/issues/11#issuecomment-721331582
[2] https://forum.manjaro.org/t/random-short-touchpad-freezes/30832/28
Cc: Hans de Goede <hdegoede(a)redhat.com>
Cc: Andy Shevchenko <andy.shevchenko(a)gmail.com>
Cc: Benjamin Tissoires <benjamin.tissoires(a)redhat.com>
Cc: stable(a)vger.kernel.org
Reviewed-by: Andy Shevchenko <andy.shevchenko(a)gmail.com>
BugLink: https://bugs.launchpad.net/ubuntu/+source/linux/+bug/1887190
Link: https://lore.kernel.org/linux-gpio/CAHp75VcwiGREBUJ0A06EEw-SyabqYsp%2Bdqs2D…
Signed-off-by: Coiby Xu <coiby.xu(a)gmail.com>
---
drivers/pinctrl/pinctrl-amd.c | 7 -------
1 file changed, 7 deletions(-)
diff --git a/drivers/pinctrl/pinctrl-amd.c b/drivers/pinctrl/pinctrl-amd.c
index e9b761c2b77a..2d4acf21117c 100644
--- a/drivers/pinctrl/pinctrl-amd.c
+++ b/drivers/pinctrl/pinctrl-amd.c
@@ -468,7 +468,6 @@ static int amd_gpio_irq_set_type(struct irq_data *d, unsigned int type)
pin_reg &= ~BIT(LEVEL_TRIG_OFF);
pin_reg &= ~(ACTIVE_LEVEL_MASK << ACTIVE_LEVEL_OFF);
pin_reg |= ACTIVE_HIGH << ACTIVE_LEVEL_OFF;
- pin_reg |= DB_TYPE_REMOVE_GLITCH << DB_CNTRL_OFF;
irq_set_handler_locked(d, handle_edge_irq);
break;
@@ -476,7 +475,6 @@ static int amd_gpio_irq_set_type(struct irq_data *d, unsigned int type)
pin_reg &= ~BIT(LEVEL_TRIG_OFF);
pin_reg &= ~(ACTIVE_LEVEL_MASK << ACTIVE_LEVEL_OFF);
pin_reg |= ACTIVE_LOW << ACTIVE_LEVEL_OFF;
- pin_reg |= DB_TYPE_REMOVE_GLITCH << DB_CNTRL_OFF;
irq_set_handler_locked(d, handle_edge_irq);
break;
@@ -484,7 +482,6 @@ static int amd_gpio_irq_set_type(struct irq_data *d, unsigned int type)
pin_reg &= ~BIT(LEVEL_TRIG_OFF);
pin_reg &= ~(ACTIVE_LEVEL_MASK << ACTIVE_LEVEL_OFF);
pin_reg |= BOTH_EADGE << ACTIVE_LEVEL_OFF;
- pin_reg |= DB_TYPE_REMOVE_GLITCH << DB_CNTRL_OFF;
irq_set_handler_locked(d, handle_edge_irq);
break;
@@ -492,8 +489,6 @@ static int amd_gpio_irq_set_type(struct irq_data *d, unsigned int type)
pin_reg |= LEVEL_TRIGGER << LEVEL_TRIG_OFF;
pin_reg &= ~(ACTIVE_LEVEL_MASK << ACTIVE_LEVEL_OFF);
pin_reg |= ACTIVE_HIGH << ACTIVE_LEVEL_OFF;
- pin_reg &= ~(DB_CNTRl_MASK << DB_CNTRL_OFF);
- pin_reg |= DB_TYPE_PRESERVE_LOW_GLITCH << DB_CNTRL_OFF;
irq_set_handler_locked(d, handle_level_irq);
break;
@@ -501,8 +496,6 @@ static int amd_gpio_irq_set_type(struct irq_data *d, unsigned int type)
pin_reg |= LEVEL_TRIGGER << LEVEL_TRIG_OFF;
pin_reg &= ~(ACTIVE_LEVEL_MASK << ACTIVE_LEVEL_OFF);
pin_reg |= ACTIVE_LOW << ACTIVE_LEVEL_OFF;
- pin_reg &= ~(DB_CNTRl_MASK << DB_CNTRL_OFF);
- pin_reg |= DB_TYPE_PRESERVE_HIGH_GLITCH << DB_CNTRL_OFF;
irq_set_handler_locked(d, handle_level_irq);
break;
--
2.28.0