- Linux-stable-mirror - lists.linaro.org

by Greg KH

diff --git a/Documentation/devicetree/bindings/arm/davinci.txt b/Documentation/devicetree/bindings/arm/davinci.txt index f0841ce725b5..715622c36260 100644 --- a/Documentation/devicetree/bindings/arm/davinci.txt +++ b/Documentation/devicetree/bindings/arm/davinci.txt @@ -13,6 +13,10 @@ EnBW AM1808 based CMC board Required root node properties: - compatible = "enbw,cmc", "ti,da850; +LEGO MINDSTORMS EV3 (AM1808 based) +Required root node properties: + - compatible = "lego,ev3", "ti,da850"; + Generic DaVinci Boards ---------------------- diff --git a/Documentation/devicetree/bindings/clock/qoriq-clock.txt b/Documentation/devicetree/bindings/clock/qoriq-clock.txt index 16a3ec433119..1bd2c76396f4 100644 --- a/Documentation/devicetree/bindings/clock/qoriq-clock.txt +++ b/Documentation/devicetree/bindings/clock/qoriq-clock.txt @@ -31,6 +31,7 @@ Required properties: * "fsl,t4240-clockgen" * "fsl,b4420-clockgen" * "fsl,b4860-clockgen" + * "fsl,ls1012a-clockgen" * "fsl,ls1021a-clockgen" Chassis-version clock strings include: * "fsl,qoriq-clockgen-1.0": for chassis 1.0 clocks diff --git a/Documentation/devicetree/bindings/vendor-prefixes.txt b/Documentation/devicetree/bindings/vendor-prefixes.txt index bceffffb7502..f949a22bcd74 100644 --- a/Documentation/devicetree/bindings/vendor-prefixes.txt +++ b/Documentation/devicetree/bindings/vendor-prefixes.txt @@ -154,6 +154,7 @@ kosagi Sutajio Ko-Usagi PTE Ltd. kyo Kyocera Corporation lacie LaCie lantiq Lantiq Semiconductor +lego LEGO Systems A/S lenovo Lenovo Group Ltd. lg LG Corporation linux Linux-specific binding diff --git a/Makefile b/Makefile index b56b99e20b30..8ab48891d088 100644 --- a/Makefile +++ b/Makefile @@ -1,6 +1,6 @@ VERSION = 4 PATCHLEVEL = 9 -SUBLEVEL = 61 +SUBLEVEL = 62 EXTRAVERSION = NAME = Roaring Lionus diff --git a/arch/arm/boot/dts/imx53-qsb-common.dtsi b/arch/arm/boot/dts/imx53-qsb-common.dtsi index c05e7cfd0cbc..40b3e31935d0 100644 --- a/arch/arm/boot/dts/imx53-qsb-common.dtsi +++ b/arch/arm/boot/dts/imx53-qsb-common.dtsi @@ -215,16 +215,16 @@ pinctrl_fec: fecgrp { fsl,pins = < - MX53_PAD_FEC_MDC__FEC_MDC 0x80000000 - MX53_PAD_FEC_MDIO__FEC_MDIO 0x80000000 - MX53_PAD_FEC_REF_CLK__FEC_TX_CLK 0x80000000 - MX53_PAD_FEC_RX_ER__FEC_RX_ER 0x80000000 - MX53_PAD_FEC_CRS_DV__FEC_RX_DV 0x80000000 - MX53_PAD_FEC_RXD1__FEC_RDATA_1 0x80000000 - MX53_PAD_FEC_RXD0__FEC_RDATA_0 0x80000000 - MX53_PAD_FEC_TX_EN__FEC_TX_EN 0x80000000 - MX53_PAD_FEC_TXD1__FEC_TDATA_1 0x80000000 - MX53_PAD_FEC_TXD0__FEC_TDATA_0 0x80000000 + MX53_PAD_FEC_MDC__FEC_MDC 0x4 + MX53_PAD_FEC_MDIO__FEC_MDIO 0x1fc + MX53_PAD_FEC_REF_CLK__FEC_TX_CLK 0x180 + MX53_PAD_FEC_RX_ER__FEC_RX_ER 0x180 + MX53_PAD_FEC_CRS_DV__FEC_RX_DV 0x180 + MX53_PAD_FEC_RXD1__FEC_RDATA_1 0x180 + MX53_PAD_FEC_RXD0__FEC_RDATA_0 0x180 + MX53_PAD_FEC_TX_EN__FEC_TX_EN 0x4 + MX53_PAD_FEC_TXD1__FEC_TDATA_1 0x4 + MX53_PAD_FEC_TXD0__FEC_TDATA_0 0x4 >; }; diff --git a/arch/arm/boot/dts/stih410.dtsi b/arch/arm/boot/dts/stih410.dtsi index a3ef7341c051..4d329b2908be 100644 --- a/arch/arm/boot/dts/stih410.dtsi +++ b/arch/arm/boot/dts/stih410.dtsi @@ -131,7 +131,7 @@ <&clk_s_d2_quadfs 0>; assigned-clock-rates = <297000000>, - <108000000>, + <297000000>, <0>, <400000000>, <400000000>; diff --git a/arch/arm/configs/omap2plus_defconfig b/arch/arm/configs/omap2plus_defconfig index 53e1a884a1ea..66d71963761d 100644 --- a/arch/arm/configs/omap2plus_defconfig +++ b/arch/arm/configs/omap2plus_defconfig @@ -216,6 +216,7 @@ CONFIG_SERIO=m CONFIG_SERIAL_8250=y CONFIG_SERIAL_8250_CONSOLE=y CONFIG_SERIAL_8250_NR_UARTS=32 +CONFIG_SERIAL_8250_RUNTIME_UARTS=6 CONFIG_SERIAL_8250_EXTENDED=y CONFIG_SERIAL_8250_MANY_PORTS=y CONFIG_SERIAL_8250_SHARE_IRQ=y diff --git a/arch/arm/kernel/traps.c b/arch/arm/kernel/traps.c index 9688ec0c6ef4..1b304897aa12 100644 --- a/arch/arm/kernel/traps.c +++ b/arch/arm/kernel/traps.c @@ -152,30 +152,26 @@ static void dump_mem(const char *lvl, const char *str, unsigned long bottom, set_fs(fs); } -static void dump_instr(const char *lvl, struct pt_regs *regs) +static void __dump_instr(const char *lvl, struct pt_regs *regs) { unsigned long addr = instruction_pointer(regs); const int thumb = thumb_mode(regs); const int width = thumb ? 4 : 8; - mm_segment_t fs; char str[sizeof("00000000 ") * 5 + 2 + 1], *p = str; int i; /* - * We need to switch to kernel mode so that we can use __get_user - * to safely read from kernel space. Note that we now dump the - * code first, just in case the backtrace kills us. + * Note that we now dump the code first, just in case the backtrace + * kills us. */ - fs = get_fs(); - set_fs(KERNEL_DS); for (i = -4; i < 1 + !!thumb; i++) { unsigned int val, bad; if (thumb) - bad = __get_user(val, &((u16 *)addr)[i]); + bad = get_user(val, &((u16 *)addr)[i]); else - bad = __get_user(val, &((u32 *)addr)[i]); + bad = get_user(val, &((u32 *)addr)[i]); if (!bad) p += sprintf(p, i == 0 ? "(%0*x) " : "%0*x ", @@ -186,8 +182,20 @@ static void dump_instr(const char *lvl, struct pt_regs *regs) } } printk("%sCode: %s\n", lvl, str); +} - set_fs(fs); +static void dump_instr(const char *lvl, struct pt_regs *regs) +{ + mm_segment_t fs; + + if (!user_mode(regs)) { + fs = get_fs(); + set_fs(KERNEL_DS); + __dump_instr(lvl, regs); + set_fs(fs); + } else { + __dump_instr(lvl, regs); + } } #ifdef CONFIG_ARM_UNWIND diff --git a/arch/arm64/mm/dma-mapping.c b/arch/arm64/mm/dma-mapping.c index b5bf46ce873b..cab3574ab7d9 100644 --- a/arch/arm64/mm/dma-mapping.c +++ b/arch/arm64/mm/dma-mapping.c @@ -836,14 +836,21 @@ static bool do_iommu_attach(struct device *dev, const struct iommu_ops *ops, * then the IOMMU core will have already configured a group for this * device, and allocated the default domain for that group. */ - if (!domain || iommu_dma_init_domain(domain, dma_base, size, dev)) { - pr_warn("Failed to set up IOMMU for device %s; retaining platform DMA ops\n", - dev_name(dev)); - return false; + if (!domain) + goto out_err; + + if (domain->type == IOMMU_DOMAIN_DMA) { + if (iommu_dma_init_domain(domain, dma_base, size, dev)) + goto out_err; + + dev->archdata.dma_ops = &iommu_dma_ops; } - dev->archdata.dma_ops = &iommu_dma_ops; return true; +out_err: + pr_warn("Failed to set up IOMMU for device %s; retaining platform DMA ops\n", + dev_name(dev)); + return false; } static void queue_iommu_attach(struct device *dev, const struct iommu_ops *ops, diff --git a/arch/mips/ar7/platform.c b/arch/mips/ar7/platform.c index 58fca9ad5fcc..3446b6fb3acb 100644 --- a/arch/mips/ar7/platform.c +++ b/arch/mips/ar7/platform.c @@ -576,6 +576,7 @@ static int __init ar7_register_uarts(void) uart_port.type = PORT_AR7; uart_port.uartclk = clk_get_rate(bus_clk) / 2; uart_port.iotype = UPIO_MEM32; + uart_port.flags = UPF_FIXED_TYPE; uart_port.regshift = 2; uart_port.line = 0; @@ -654,6 +655,10 @@ static int __init ar7_register_devices(void) u32 val; int res; + res = ar7_gpio_init(); + if (res) + pr_warn("unable to register gpios: %d\n", res); + res = ar7_register_uarts(); if (res) pr_err("unable to setup uart(s): %d\n", res); diff --git a/arch/mips/ar7/prom.c b/arch/mips/ar7/prom.c index a23adc49d50f..36aabee9cba4 100644 --- a/arch/mips/ar7/prom.c +++ b/arch/mips/ar7/prom.c @@ -246,8 +246,6 @@ void __init prom_init(void) ar7_init_cmdline(fw_arg0, (char **)fw_arg1); ar7_init_env((struct env_var *)fw_arg2); console_config(); - - ar7_gpio_init(); } #define PORT(offset) (KSEG1ADDR(AR7_REGS_UART0 + (offset * 4))) diff --git a/arch/mips/include/asm/mips-cm.h b/arch/mips/include/asm/mips-cm.h index 2e4180797b21..b6845db453a3 100644 --- a/arch/mips/include/asm/mips-cm.h +++ b/arch/mips/include/asm/mips-cm.h @@ -239,8 +239,8 @@ BUILD_CM_Cx_R_(tcid_8_priority, 0x80) #define CM_GCR_BASE_GCRBASE_MSK (_ULCAST_(0x1ffff) << 15) #define CM_GCR_BASE_CMDEFTGT_SHF 0 #define CM_GCR_BASE_CMDEFTGT_MSK (_ULCAST_(0x3) << 0) -#define CM_GCR_BASE_CMDEFTGT_DISABLED 0 -#define CM_GCR_BASE_CMDEFTGT_MEM 1 +#define CM_GCR_BASE_CMDEFTGT_MEM 0 +#define CM_GCR_BASE_CMDEFTGT_RESERVED 1 #define CM_GCR_BASE_CMDEFTGT_IOCU0 2 #define CM_GCR_BASE_CMDEFTGT_IOCU1 3 diff --git a/arch/mips/kernel/process.c b/arch/mips/kernel/process.c index 1b50958a1373..c558bce989cd 100644 --- a/arch/mips/kernel/process.c +++ b/arch/mips/kernel/process.c @@ -50,9 +50,7 @@ #ifdef CONFIG_HOTPLUG_CPU void arch_cpu_idle_dead(void) { - /* What the heck is this check doing ? */ - if (!cpumask_test_cpu(smp_processor_id(), &cpu_callin_map)) - play_dead(); + play_dead(); } #endif diff --git a/arch/mips/kernel/smp-bmips.c b/arch/mips/kernel/smp-bmips.c index 6d0f1321e084..47c9646f93b3 100644 --- a/arch/mips/kernel/smp-bmips.c +++ b/arch/mips/kernel/smp-bmips.c @@ -587,11 +587,11 @@ void __init bmips_cpu_setup(void) /* Flush and enable RAC */ cfg = __raw_readl(cbr + BMIPS_RAC_CONFIG); - __raw_writel(cfg | 0x100, BMIPS_RAC_CONFIG); + __raw_writel(cfg | 0x100, cbr + BMIPS_RAC_CONFIG); __raw_readl(cbr + BMIPS_RAC_CONFIG); cfg = __raw_readl(cbr + BMIPS_RAC_CONFIG); - __raw_writel(cfg | 0xf, BMIPS_RAC_CONFIG); + __raw_writel(cfg | 0xf, cbr + BMIPS_RAC_CONFIG); __raw_readl(cbr + BMIPS_RAC_CONFIG); cfg = __raw_readl(cbr + BMIPS_RAC_ADDRESS_RANGE); diff --git a/arch/mips/kernel/smp.c b/arch/mips/kernel/smp.c index 7ebb1918e2ac..95ba4271af6a 100644 --- a/arch/mips/kernel/smp.c +++ b/arch/mips/kernel/smp.c @@ -68,6 +68,9 @@ EXPORT_SYMBOL(cpu_sibling_map); cpumask_t cpu_core_map[NR_CPUS] __read_mostly; EXPORT_SYMBOL(cpu_core_map); +static DECLARE_COMPLETION(cpu_starting); +static DECLARE_COMPLETION(cpu_running); + /* * A logcal cpu mask containing only one VPE per core to * reduce the number of IPIs on large MT systems. @@ -369,9 +372,12 @@ asmlinkage void start_secondary(void) cpumask_set_cpu(cpu, &cpu_coherent_mask); notify_cpu_starting(cpu); - cpumask_set_cpu(cpu, &cpu_callin_map); + /* Notify boot CPU that we're starting & ready to sync counters */ + complete(&cpu_starting); + synchronise_count_slave(cpu); + /* The CPU is running and counters synchronised, now mark it online */ set_cpu_online(cpu, true); set_cpu_sibling_map(cpu); @@ -379,6 +385,12 @@ asmlinkage void start_secondary(void) calculate_cpu_foreign_map(); + /* + * Notify boot CPU that we're up & online and it can safely return + * from __cpu_up + */ + complete(&cpu_running); + /* * irq will be enabled in ->smp_finish(), enabling it too early * is dangerous. @@ -430,22 +442,23 @@ void smp_prepare_boot_cpu(void) { set_cpu_possible(0, true); set_cpu_online(0, true); - cpumask_set_cpu(0, &cpu_callin_map); } int __cpu_up(unsigned int cpu, struct task_struct *tidle) { mp_ops->boot_secondary(cpu, tidle); - /* - * Trust is futile. We should really have timeouts ... - */ - while (!cpumask_test_cpu(cpu, &cpu_callin_map)) { - udelay(100); - schedule(); + /* Wait for CPU to start and be ready to sync counters */ + if (!wait_for_completion_timeout(&cpu_starting, + msecs_to_jiffies(1000))) { + pr_crit("CPU%u: failed to start\n", cpu); + return -EIO; } synchronise_count_master(cpu); + + /* Wait for CPU to finish startup & mark itself online before return */ + wait_for_completion(&cpu_running); return 0; } diff --git a/arch/mips/mm/uasm-micromips.c b/arch/mips/mm/uasm-micromips.c index 277cf52d80e1..6c17cba7f383 100644 --- a/arch/mips/mm/uasm-micromips.c +++ b/arch/mips/mm/uasm-micromips.c @@ -80,7 +80,7 @@ static struct insn insn_table_MM[] = { { insn_jr, M(mm_pool32a_op, 0, 0, 0, mm_jalr_op, mm_pool32axf_op), RS }, { insn_lb, M(mm_lb32_op, 0, 0, 0, 0, 0), RT | RS | SIMM }, { insn_ld, 0, 0 }, - { insn_lh, M(mm_lh32_op, 0, 0, 0, 0, 0), RS | RS | SIMM }, + { insn_lh, M(mm_lh32_op, 0, 0, 0, 0, 0), RT | RS | SIMM }, { insn_ll, M(mm_pool32c_op, 0, 0, (mm_ll_func << 1), 0, 0), RS | RT | SIMM }, { insn_lld, 0, 0 }, { insn_lui, M(mm_pool32i_op, mm_lui_op, 0, 0, 0, 0), RS | SIMM }, diff --git a/arch/powerpc/boot/dts/fsl/kmcoge4.dts b/arch/powerpc/boot/dts/fsl/kmcoge4.dts index ae70a24094b0..e103c0f3f650 100644 --- a/arch/powerpc/boot/dts/fsl/kmcoge4.dts +++ b/arch/powerpc/boot/dts/fsl/kmcoge4.dts @@ -83,6 +83,10 @@ }; }; + sdhc@114000 { + status = "disabled"; + }; + i2c@119000 { status = "disabled"; }; diff --git a/arch/powerpc/kernel/time.c b/arch/powerpc/kernel/time.c index bc3f7d0d7b79..f1d7e996e673 100644 --- a/arch/powerpc/kernel/time.c +++ b/arch/powerpc/kernel/time.c @@ -407,6 +407,7 @@ void arch_vtime_task_switch(struct task_struct *prev) struct cpu_accounting_data *acct = get_accounting(current); acct->starttime = get_accounting(prev)->starttime; + acct->startspurr = get_accounting(prev)->startspurr; acct->system_time = 0; acct->user_time = 0; } diff --git a/arch/powerpc/kvm/book3s_hv_rm_xics.c b/arch/powerpc/kvm/book3s_hv_rm_xics.c index a0ea63ac2b52..a8e3498a853f 100644 --- a/arch/powerpc/kvm/book3s_hv_rm_xics.c +++ b/arch/powerpc/kvm/book3s_hv_rm_xics.c @@ -376,6 +376,7 @@ static void icp_rm_deliver_irq(struct kvmppc_xics *xics, struct kvmppc_icp *icp, */ if (reject && reject != XICS_IPI) { arch_spin_unlock(&ics->lock); + icp->n_reject++; new_irq = reject; goto again; } @@ -707,10 +708,8 @@ int kvmppc_rm_h_eoi(struct kvm_vcpu *vcpu, unsigned long xirr) state = &ics->irq_state[src]; /* Still asserted, resend it */ - if (state->asserted) { - icp->n_reject++; + if (state->asserted) icp_rm_deliver_irq(xics, icp, irq); - } if (!hlist_empty(&vcpu->kvm->irq_ack_notifier_list)) { icp->rm_action |= XICS_RM_NOTIFY_EOI; diff --git a/arch/s390/kernel/early.c b/arch/s390/kernel/early.c index 2374c5b46bbc..0c196861bc38 100644 --- a/arch/s390/kernel/early.c +++ b/arch/s390/kernel/early.c @@ -363,6 +363,18 @@ static inline void save_vector_registers(void) #endif } +static int __init topology_setup(char *str) +{ + bool enabled; + int rc; + + rc = kstrtobool(str, &enabled); + if (!rc && !enabled) + S390_lowcore.machine_flags &= ~MACHINE_HAS_TOPOLOGY; + return rc; +} +early_param("topology", topology_setup); + static int __init disable_vector_extension(char *str) { S390_lowcore.machine_flags &= ~MACHINE_FLAG_VX; diff --git a/arch/s390/kernel/topology.c b/arch/s390/kernel/topology.c index 8705ee66c087..239f29508f0b 100644 --- a/arch/s390/kernel/topology.c +++ b/arch/s390/kernel/topology.c @@ -37,7 +37,6 @@ static void set_topology_timer(void); static void topology_work_fn(struct work_struct *work); static struct sysinfo_15_1_x *tl_info; -static bool topology_enabled = true; static DECLARE_WORK(topology_work, topology_work_fn); /* @@ -56,7 +55,7 @@ static cpumask_t cpu_group_map(struct mask_info *info, unsigned int cpu) cpumask_t mask; cpumask_copy(&mask, cpumask_of(cpu)); - if (!topology_enabled || !MACHINE_HAS_TOPOLOGY) + if (!MACHINE_HAS_TOPOLOGY) return mask; for (; info; info = info->next) { if (cpumask_test_cpu(cpu, &info->mask)) @@ -71,7 +70,7 @@ static cpumask_t cpu_thread_map(unsigned int cpu) int i; cpumask_copy(&mask, cpumask_of(cpu)); - if (!topology_enabled || !MACHINE_HAS_TOPOLOGY) + if (!MACHINE_HAS_TOPOLOGY) return mask; cpu -= cpu % (smp_cpu_mtid + 1); for (i = 0; i <= smp_cpu_mtid; i++) @@ -413,12 +412,6 @@ static const struct cpumask *cpu_drawer_mask(int cpu) return &per_cpu(cpu_topology, cpu).drawer_mask; } -static int __init early_parse_topology(char *p) -{ - return kstrtobool(p, &topology_enabled); -} -early_param("topology", early_parse_topology); - static struct sched_domain_topology_level s390_topology[] = { { cpu_thread_mask, cpu_smt_flags, SD_INIT_NAME(SMT) }, { cpu_coregroup_mask, cpu_core_flags, SD_INIT_NAME(MC) }, diff --git a/arch/sh/kernel/cpu/sh3/setup-sh770x.c b/arch/sh/kernel/cpu/sh3/setup-sh770x.c index 538c10db3537..8dc315b212c2 100644 --- a/arch/sh/kernel/cpu/sh3/setup-sh770x.c +++ b/arch/sh/kernel/cpu/sh3/setup-sh770x.c @@ -165,7 +165,6 @@ static struct plat_sci_port scif2_platform_data = { .scscr = SCSCR_TE | SCSCR_RE, .type = PORT_IRDA, .ops = &sh770x_sci_port_ops, - .regshift = 1, }; static struct resource scif2_resources[] = { diff --git a/arch/x86/crypto/sha1-mb/sha1_mb_mgr_flush_avx2.S b/arch/x86/crypto/sha1-mb/sha1_mb_mgr_flush_avx2.S index 96df6a39d7e2..a2ae6891e1fc 100644 --- a/arch/x86/crypto/sha1-mb/sha1_mb_mgr_flush_avx2.S +++ b/arch/x86/crypto/sha1-mb/sha1_mb_mgr_flush_avx2.S @@ -157,8 +157,8 @@ LABEL skip_ %I .endr # Find min length - vmovdqa _lens+0*16(state), %xmm0 - vmovdqa _lens+1*16(state), %xmm1 + vmovdqu _lens+0*16(state), %xmm0 + vmovdqu _lens+1*16(state), %xmm1 vpminud %xmm1, %xmm0, %xmm2 # xmm2 has {D,C,B,A} vpalignr $8, %xmm2, %xmm3, %xmm3 # xmm3 has {x,x,D,C} @@ -178,8 +178,8 @@ LABEL skip_ %I vpsubd %xmm2, %xmm0, %xmm0 vpsubd %xmm2, %xmm1, %xmm1 - vmovdqa %xmm0, _lens+0*16(state) - vmovdqa %xmm1, _lens+1*16(state) + vmovdqu %xmm0, _lens+0*16(state) + vmovdqu %xmm1, _lens+1*16(state) # "state" and "args" are the same address, arg1 # len is arg2 @@ -235,8 +235,8 @@ ENTRY(sha1_mb_mgr_get_comp_job_avx2) jc .return_null # Find min length - vmovdqa _lens(state), %xmm0 - vmovdqa _lens+1*16(state), %xmm1 + vmovdqu _lens(state), %xmm0 + vmovdqu _lens+1*16(state), %xmm1 vpminud %xmm1, %xmm0, %xmm2 # xmm2 has {D,C,B,A} vpalignr $8, %xmm2, %xmm3, %xmm3 # xmm3 has {x,x,D,C} diff --git a/arch/x86/crypto/sha256-mb/sha256_mb_mgr_flush_avx2.S b/arch/x86/crypto/sha256-mb/sha256_mb_mgr_flush_avx2.S index a78a0694ddef..ec9bee661d50 100644 --- a/arch/x86/crypto/sha256-mb/sha256_mb_mgr_flush_avx2.S +++ b/arch/x86/crypto/sha256-mb/sha256_mb_mgr_flush_avx2.S @@ -155,8 +155,8 @@ LABEL skip_ %I .endr # Find min length - vmovdqa _lens+0*16(state), %xmm0 - vmovdqa _lens+1*16(state), %xmm1 + vmovdqu _lens+0*16(state), %xmm0 + vmovdqu _lens+1*16(state), %xmm1 vpminud %xmm1, %xmm0, %xmm2 # xmm2 has {D,C,B,A} vpalignr $8, %xmm2, %xmm3, %xmm3 # xmm3 has {x,x,D,C} @@ -176,8 +176,8 @@ LABEL skip_ %I vpsubd %xmm2, %xmm0, %xmm0 vpsubd %xmm2, %xmm1, %xmm1 - vmovdqa %xmm0, _lens+0*16(state) - vmovdqa %xmm1, _lens+1*16(state) + vmovdqu %xmm0, _lens+0*16(state) + vmovdqu %xmm1, _lens+1*16(state) # "state" and "args" are the same address, arg1 # len is arg2 @@ -234,8 +234,8 @@ ENTRY(sha256_mb_mgr_get_comp_job_avx2) jc .return_null # Find min length - vmovdqa _lens(state), %xmm0 - vmovdqa _lens+1*16(state), %xmm1 + vmovdqu _lens(state), %xmm0 + vmovdqu _lens+1*16(state), %xmm1 vpminud %xmm1, %xmm0, %xmm2 # xmm2 has {D,C,B,A} vpalignr $8, %xmm2, %xmm3, %xmm3 # xmm3 has {x,x,D,C} diff --git a/arch/x86/include/asm/uaccess.h b/arch/x86/include/asm/uaccess.h index a300aa10ebc5..dead0f3921f3 100644 --- a/arch/x86/include/asm/uaccess.h +++ b/arch/x86/include/asm/uaccess.h @@ -68,6 +68,12 @@ static inline bool __chk_range_not_ok(unsigned long addr, unsigned long size, un __chk_range_not_ok((unsigned long __force)(addr), size, limit); \ }) +#ifdef CONFIG_DEBUG_ATOMIC_SLEEP +# define WARN_ON_IN_IRQ() WARN_ON_ONCE(!in_task()) +#else +# define WARN_ON_IN_IRQ() +#endif + /** * access_ok: - Checks if a user space pointer is valid * @type: Type of access: %VERIFY_READ or %VERIFY_WRITE. Note that @@ -88,8 +94,11 @@ static inline bool __chk_range_not_ok(unsigned long addr, unsigned long size, un * checks that the pointer is in the user space range - after calling * this function, memory access functions may still return -EFAULT. */ -#define access_ok(type, addr, size) \ - likely(!__range_not_ok(addr, size, user_addr_max())) +#define access_ok(type, addr, size) \ +({ \ + WARN_ON_IN_IRQ(); \ + likely(!__range_not_ok(addr, size, user_addr_max())); \ +}) /* * These are the main single-value transfer routines. They automatically diff --git a/arch/x86/kernel/smpboot.c b/arch/x86/kernel/smpboot.c index 36171bcd91f8..9fe7b9e1ae30 100644 --- a/arch/x86/kernel/smpboot.c +++ b/arch/x86/kernel/smpboot.c @@ -180,6 +180,12 @@ static void smp_callin(void) */ smp_store_cpu_info(cpuid); + /* + * The topology information must be up to date before + * calibrate_delay() and notify_cpu_starting(). + */ + set_cpu_sibling_map(raw_smp_processor_id()); + /* * Get our bogomips. * Update loops_per_jiffy in cpu_data. Previous call to @@ -190,11 +196,6 @@ static void smp_callin(void) cpu_data(cpuid).loops_per_jiffy = loops_per_jiffy; pr_debug("Stack at about %p\n", &cpuid); - /* - * This must be done before setting cpu_online_mask - * or calling notify_cpu_starting. - */ - set_cpu_sibling_map(raw_smp_processor_id()); wmb(); notify_cpu_starting(cpuid); diff --git a/arch/x86/kernel/tsc.c b/arch/x86/kernel/tsc.c index 6e57edf33d75..44bf5cf417d3 100644 --- a/arch/x86/kernel/tsc.c +++ b/arch/x86/kernel/tsc.c @@ -1382,12 +1382,10 @@ void __init tsc_init(void) unsigned long calibrate_delay_is_known(void) { int sibling, cpu = smp_processor_id(); - struct cpumask *mask = topology_core_cpumask(cpu); + int constant_tsc = cpu_has(&cpu_data(cpu), X86_FEATURE_CONSTANT_TSC); + const struct cpumask *mask = topology_core_cpumask(cpu); - if (!tsc_disabled && !cpu_has(&cpu_data(cpu), X86_FEATURE_CONSTANT_TSC)) - return 0; - - if (!mask) + if (tsc_disabled || !constant_tsc || !mask) return 0; sibling = cpumask_any_but(mask, cpu); diff --git a/arch/x86/oprofile/op_model_ppro.c b/arch/x86/oprofile/op_model_ppro.c index 350f7096baac..7913b6921959 100644 --- a/arch/x86/oprofile/op_model_ppro.c +++ b/arch/x86/oprofile/op_model_ppro.c @@ -212,8 +212,8 @@ static void arch_perfmon_setup_counters(void) eax.full = cpuid_eax(0xa); /* Workaround for BIOS bugs in 6/15. Taken from perfmon2 */ - if (eax.split.version_id == 0 && __this_cpu_read(cpu_info.x86) == 6 && - __this_cpu_read(cpu_info.x86_model) == 15) { + if (eax.split.version_id == 0 && boot_cpu_data.x86 == 6 && + boot_cpu_data.x86_model == 15) { eax.split.version_id = 2; eax.split.num_counters = 2; eax.split.bit_width = 40; diff --git a/crypto/ccm.c b/crypto/ccm.c index 006d8575ef5c..b3ace633fae9 100644 --- a/crypto/ccm.c +++ b/crypto/ccm.c @@ -413,7 +413,7 @@ static int crypto_ccm_decrypt(struct aead_request *req) unsigned int cryptlen = req->cryptlen; u8 *authtag = pctx->auth_tag; u8 *odata = pctx->odata; - u8 *iv = req->iv; + u8 *iv = pctx->idata; int err; cryptlen -= authsize; @@ -429,6 +429,8 @@ static int crypto_ccm_decrypt(struct aead_request *req) if (req->src != req->dst) dst = pctx->dst; + memcpy(iv, req->iv, 16); + skcipher_request_set_tfm(skreq, ctx->ctr); skcipher_request_set_callback(skreq, pctx->flags, crypto_ccm_decrypt_done, req); diff --git a/drivers/base/power/opp/of.c b/drivers/base/power/opp/of.c index 5552211e6fcd..b52c617947ad 100644 --- a/drivers/base/power/opp/of.c +++ b/drivers/base/power/opp/of.c @@ -386,7 +386,7 @@ static int _of_add_opp_table_v1(struct device *dev) { const struct property *prop; const __be32 *val; - int nr; + int nr, ret; prop = of_find_property(dev->of_node, "operating-points", NULL); if (!prop) @@ -409,9 +409,13 @@ static int _of_add_opp_table_v1(struct device *dev) unsigned long freq = be32_to_cpup(val++) * 1000; unsigned long volt = be32_to_cpup(val++); - if (_opp_add_v1(dev, freq, volt, false)) - dev_warn(dev, "%s: Failed to add OPP %ld\n", - __func__, freq); + ret = _opp_add_v1(dev, freq, volt, false); + if (ret) { + dev_err(dev, "%s: Failed to add OPP %ld (%d)\n", + __func__, freq, ret); + dev_pm_opp_of_remove_table(dev); + return ret; + } nr -= 2; } diff --git a/drivers/block/rbd.c b/drivers/block/rbd.c index 7b274ff4632c..24f4b544d270 100644 --- a/drivers/block/rbd.c +++ b/drivers/block/rbd.c @@ -2788,7 +2788,7 @@ static int rbd_img_obj_parent_read_full(struct rbd_obj_request *obj_request) * from the parent. */ page_count = (u32)calc_pages_for(0, length); - pages = ceph_alloc_page_vector(page_count, GFP_KERNEL); + pages = ceph_alloc_page_vector(page_count, GFP_NOIO); if (IS_ERR(pages)) { result = PTR_ERR(pages); pages = NULL; @@ -2922,7 +2922,7 @@ static int rbd_img_obj_exists_submit(struct rbd_obj_request *obj_request) */ size = sizeof (__le64) + sizeof (__le32) + sizeof (__le32); page_count = (u32)calc_pages_for(0, size); - pages = ceph_alloc_page_vector(page_count, GFP_KERNEL); + pages = ceph_alloc_page_vector(page_count, GFP_NOIO); if (IS_ERR(pages)) { ret = PTR_ERR(pages); goto fail_stat_request; diff --git a/drivers/clk/mvebu/ap806-system-controller.c b/drivers/clk/mvebu/ap806-system-controller.c index 02023baf86c9..962e0c5f6f4d 100644 --- a/drivers/clk/mvebu/ap806-system-controller.c +++ b/drivers/clk/mvebu/ap806-system-controller.c @@ -55,21 +55,39 @@ static int ap806_syscon_clk_probe(struct platform_device *pdev) freq_mode = reg & AP806_SAR_CLKFREQ_MODE_MASK; switch (freq_mode) { - case 0x0 ... 0x5: + case 0x0: + case 0x1: cpuclk_freq = 2000; break; - case 0x6 ... 0xB: + case 0x6: + case 0x7: cpuclk_freq = 1800; break; - case 0xC ... 0x11: + case 0x4: + case 0xB: + case 0xD: cpuclk_freq = 1600; break; - case 0x12 ... 0x16: + case 0x1a: cpuclk_freq = 1400; break; - case 0x17 ... 0x19: + case 0x14: + case 0x17: cpuclk_freq = 1300; break; + case 0x19: + cpuclk_freq = 1200; + break; + case 0x13: + case 0x1d: + cpuclk_freq = 1000; + break; + case 0x1c: + cpuclk_freq = 800; + break; + case 0x1b: + cpuclk_freq = 600; + break; default: dev_err(&pdev->dev, "invalid SAR value\n"); return -EINVAL; diff --git a/drivers/clk/samsung/clk-exynos5433.c b/drivers/clk/samsung/clk-exynos5433.c index ea1608682d7f..2fe057326552 100644 --- a/drivers/clk/samsung/clk-exynos5433.c +++ b/drivers/clk/samsung/clk-exynos5433.c @@ -2559,8 +2559,10 @@ static const struct samsung_fixed_rate_clock disp_fixed_clks[] __initconst = { FRATE(0, "phyclk_mipidphy1_bitclkdiv8_phy", NULL, 0, 188000000), FRATE(0, "phyclk_mipidphy1_rxclkesc0_phy", NULL, 0, 100000000), /* PHY clocks from MIPI_DPHY0 */ - FRATE(0, "phyclk_mipidphy0_bitclkdiv8_phy", NULL, 0, 188000000), - FRATE(0, "phyclk_mipidphy0_rxclkesc0_phy", NULL, 0, 100000000), + FRATE(CLK_PHYCLK_MIPIDPHY0_BITCLKDIV8_PHY, "phyclk_mipidphy0_bitclkdiv8_phy", + NULL, 0, 188000000), + FRATE(CLK_PHYCLK_MIPIDPHY0_RXCLKESC0_PHY, "phyclk_mipidphy0_rxclkesc0_phy", + NULL, 0, 100000000), /* PHY clocks from HDMI_PHY */ FRATE(CLK_PHYCLK_HDMIPHY_TMDS_CLKO_PHY, "phyclk_hdmiphy_tmds_clko_phy", NULL, 0, 300000000), diff --git a/drivers/crypto/vmx/aes_ctr.c b/drivers/crypto/vmx/aes_ctr.c index 38ed10d761d0..7cf6d31c1123 100644 --- a/drivers/crypto/vmx/aes_ctr.c +++ b/drivers/crypto/vmx/aes_ctr.c @@ -80,11 +80,13 @@ static int p8_aes_ctr_setkey(struct crypto_tfm *tfm, const u8 *key, int ret; struct p8_aes_ctr_ctx *ctx = crypto_tfm_ctx(tfm); + preempt_disable(); pagefault_disable(); enable_kernel_vsx(); ret = aes_p8_set_encrypt_key(key, keylen * 8, &ctx->enc_key); disable_kernel_vsx(); pagefault_enable(); + preempt_enable(); ret += crypto_blkcipher_setkey(ctx->fallback, key, keylen); return ret; @@ -99,11 +101,13 @@ static void p8_aes_ctr_final(struct p8_aes_ctr_ctx *ctx, u8 *dst = walk->dst.virt.addr; unsigned int nbytes = walk->nbytes; + preempt_disable(); pagefault_disable(); enable_kernel_vsx(); aes_p8_encrypt(ctrblk, keystream, &ctx->enc_key); disable_kernel_vsx(); pagefault_enable(); + preempt_enable(); crypto_xor(keystream, src, nbytes); memcpy(dst, keystream, nbytes); @@ -132,6 +136,7 @@ static int p8_aes_ctr_crypt(struct blkcipher_desc *desc, blkcipher_walk_init(&walk, dst, src, nbytes); ret = blkcipher_walk_virt_block(desc, &walk, AES_BLOCK_SIZE); while ((nbytes = walk.nbytes) >= AES_BLOCK_SIZE) { + preempt_disable(); pagefault_disable(); enable_kernel_vsx(); aes_p8_ctr32_encrypt_blocks(walk.src.virt.addr, @@ -143,6 +148,7 @@ static int p8_aes_ctr_crypt(struct blkcipher_desc *desc, walk.iv); disable_kernel_vsx(); pagefault_enable(); + preempt_enable(); /* We need to update IV mostly for last bytes/round */ inc = (nbytes & AES_BLOCK_MASK) / AES_BLOCK_SIZE; diff --git a/drivers/edac/amd64_edac.c b/drivers/edac/amd64_edac.c index ee181c53626f..6e197c1c213d 100644 --- a/drivers/edac/amd64_edac.c +++ b/drivers/edac/amd64_edac.c @@ -2984,8 +2984,11 @@ static int __init amd64_edac_init(void) int err = -ENODEV; int i; + if (!x86_match_cpu(amd64_cpuids)) + return -ENODEV; + if (amd_cache_northbridges() < 0) - goto err_ret; + return -ENODEV; opstate_init(); @@ -2998,14 +3001,16 @@ static int __init amd64_edac_init(void) if (!msrs) goto err_free; - for (i = 0; i < amd_nb_num(); i++) - if (probe_one_instance(i)) { + for (i = 0; i < amd_nb_num(); i++) { + err = probe_one_instance(i); + if (err) { /* unwind properly */ while (--i >= 0) remove_one_instance(i); goto err_pci; } + } setup_pci_device(); @@ -3025,7 +3030,6 @@ static int __init amd64_edac_init(void) kfree(ecc_stngs); ecc_stngs = NULL; -err_ret: return err; } diff --git a/drivers/edac/amd64_edac.h b/drivers/edac/amd64_edac.h index c08870479054..dcb5f9481735 100644 --- a/drivers/edac/amd64_edac.h +++ b/drivers/edac/amd64_edac.h @@ -16,6 +16,7 @@ #include <linux/slab.h> #include <linux/mmzone.h> #include <linux/edac.h> +#include <asm/cpu_device_id.h> #include <asm/msr.h> #include "edac_core.h" #include "mce_amd.h" diff --git a/drivers/gpu/drm/arm/malidp_planes.c b/drivers/gpu/drm/arm/malidp_planes.c index afe0480d95c9..8b009b549e45 100644 --- a/drivers/gpu/drm/arm/malidp_planes.c +++ b/drivers/gpu/drm/arm/malidp_planes.c @@ -182,7 +182,8 @@ static void malidp_de_plane_update(struct drm_plane *plane, /* setup the rotation and axis flip bits */ if (plane->state->rotation & DRM_ROTATE_MASK) - val = ilog2(plane->state->rotation & DRM_ROTATE_MASK) << LAYER_ROT_OFFSET; + val |= ilog2(plane->state->rotation & DRM_ROTATE_MASK) << + LAYER_ROT_OFFSET; if (plane->state->rotation & DRM_REFLECT_X) val |= LAYER_H_FLIP; if (plane->state->rotation & DRM_REFLECT_Y) diff --git a/drivers/gpu/drm/bridge/adv7511/adv7511_drv.c b/drivers/gpu/drm/bridge/adv7511/adv7511_drv.c index 213d892b6fa3..a68f94daf9b6 100644 --- a/drivers/gpu/drm/bridge/adv7511/adv7511_drv.c +++ b/drivers/gpu/drm/bridge/adv7511/adv7511_drv.c @@ -325,7 +325,7 @@ static void adv7511_set_link_config(struct adv7511 *adv7511, adv7511->rgb = config->input_colorspace == HDMI_COLORSPACE_RGB; } -static void adv7511_power_on(struct adv7511 *adv7511) +static void __adv7511_power_on(struct adv7511 *adv7511) { adv7511->current_edid_segment = -1; @@ -354,6 +354,11 @@ static void adv7511_power_on(struct adv7511 *adv7511) regmap_update_bits(adv7511->regmap, ADV7511_REG_POWER2, ADV7511_REG_POWER2_HPD_SRC_MASK, ADV7511_REG_POWER2_HPD_SRC_NONE); +} + +static void adv7511_power_on(struct adv7511 *adv7511) +{ + __adv7511_power_on(adv7511); /* * Most of the registers are reset during power down or when HPD is low. @@ -362,21 +367,23 @@ static void adv7511_power_on(struct adv7511 *adv7511) if (adv7511->type == ADV7533) adv7533_dsi_power_on(adv7511); - adv7511->powered = true; } -static void adv7511_power_off(struct adv7511 *adv7511) +static void __adv7511_power_off(struct adv7511 *adv7511) { /* TODO: setup additional power down modes */ regmap_update_bits(adv7511->regmap, ADV7511_REG_POWER, ADV7511_POWER_POWER_DOWN, ADV7511_POWER_POWER_DOWN); regcache_mark_dirty(adv7511->regmap); +} +static void adv7511_power_off(struct adv7511 *adv7511) +{ + __adv7511_power_off(adv7511); if (adv7511->type == ADV7533) adv7533_dsi_power_off(adv7511); - adv7511->powered = false; } @@ -567,23 +574,20 @@ static int adv7511_get_modes(struct adv7511 *adv7511, /* Reading the EDID only works if the device is powered */ if (!adv7511->powered) { - regmap_update_bits(adv7511->regmap, ADV7511_REG_POWER, - ADV7511_POWER_POWER_DOWN, 0); - if (adv7511->i2c_main->irq) { - regmap_write(adv7511->regmap, ADV7511_REG_INT_ENABLE(0), - ADV7511_INT0_EDID_READY); - regmap_write(adv7511->regmap, ADV7511_REG_INT_ENABLE(1), - ADV7511_INT1_DDC_ERROR); - } - adv7511->current_edid_segment = -1; + unsigned int edid_i2c_addr = + (adv7511->i2c_main->addr << 1) + 4; + + __adv7511_power_on(adv7511); + + /* Reset the EDID_I2C_ADDR register as it might be cleared */ + regmap_write(adv7511->regmap, ADV7511_REG_EDID_I2C_ADDR, + edid_i2c_addr); } edid = drm_do_get_edid(connector, adv7511_get_edid_block, adv7511); if (!adv7511->powered) - regmap_update_bits(adv7511->regmap, ADV7511_REG_POWER, - ADV7511_POWER_POWER_DOWN, - ADV7511_POWER_POWER_DOWN); + __adv7511_power_off(adv7511); kfree(adv7511->edid); adv7511->edid = edid; diff --git a/drivers/gpu/drm/drm_drv.c b/drivers/gpu/drm/drm_drv.c index 362b8cd68a24..80a903bd317d 100644 --- a/drivers/gpu/drm/drm_drv.c +++ b/drivers/gpu/drm/drm_drv.c @@ -218,7 +218,7 @@ static int drm_minor_register(struct drm_device *dev, unsigned int type) ret = drm_debugfs_init(minor, minor->index, drm_debugfs_root); if (ret) { DRM_ERROR("DRM: Failed to initialize /sys/kernel/debug/dri.\n"); - return ret; + goto err_debugfs; } ret = device_add(minor->kdev); diff --git a/drivers/gpu/drm/i915/intel_drv.h b/drivers/gpu/drm/i915/intel_drv.h index a19ec06f9e42..3ce9ba30d827 100644 --- a/drivers/gpu/drm/i915/intel_drv.h +++ b/drivers/gpu/drm/i915/intel_drv.h @@ -457,7 +457,6 @@ struct intel_crtc_scaler_state { struct intel_pipe_wm { struct intel_wm_level wm[5]; - struct intel_wm_level raw_wm[5]; uint32_t linetime; bool fbc_wm_enabled; bool pipe_enabled; diff --git a/drivers/gpu/drm/i915/intel_pm.c b/drivers/gpu/drm/i915/intel_pm.c index 49de4760cc16..277a8026460b 100644 --- a/drivers/gpu/drm/i915/intel_pm.c +++ b/drivers/gpu/drm/i915/intel_pm.c @@ -27,6 +27,7 @@ #include <linux/cpufreq.h> #include <drm/drm_plane_helper.h> +#include <drm/drm_atomic_helper.h> #include "i915_drv.h" #include "intel_drv.h" #include "../../../platform/x86/intel_ips.h" @@ -2017,9 +2018,9 @@ static void ilk_compute_wm_level(const struct drm_i915_private *dev_priv, const struct intel_crtc *intel_crtc, int level, struct intel_crtc_state *cstate, - struct intel_plane_state *pristate, - struct intel_plane_state *sprstate, - struct intel_plane_state *curstate, + const struct intel_plane_state *pristate, + const struct intel_plane_state *sprstate, + const struct intel_plane_state *curstate, struct intel_wm_level *result) { uint16_t pri_latency = dev_priv->wm.pri_latency[level]; @@ -2341,28 +2342,24 @@ static int ilk_compute_pipe_wm(struct intel_crtc_state *cstate) struct intel_pipe_wm *pipe_wm; struct drm_device *dev = state->dev; const struct drm_i915_private *dev_priv = to_i915(dev); - struct intel_plane *intel_plane; - struct intel_plane_state *pristate = NULL; - struct intel_plane_state *sprstate = NULL; - struct intel_plane_state *curstate = NULL; + struct drm_plane *plane; + const struct drm_plane_state *plane_state; + const struct intel_plane_state *pristate = NULL; + const struct intel_plane_state *sprstate = NULL; + const struct intel_plane_state *curstate = NULL; int level, max_level = ilk_wm_max_level(dev), usable_level; struct ilk_wm_maximums max; pipe_wm = &cstate->wm.ilk.optimal; - for_each_intel_plane_on_crtc(dev, intel_crtc, intel_plane) { - struct intel_plane_state *ps; + drm_atomic_crtc_state_for_each_plane_state(plane, plane_state, &cstate->base) { + const struct intel_plane_state *ps = to_intel_plane_state(plane_state); - ps = intel_atomic_get_existing_plane_state(state, - intel_plane); - if (!ps) - continue; - - if (intel_plane->base.type == DRM_PLANE_TYPE_PRIMARY) + if (plane->type == DRM_PLANE_TYPE_PRIMARY) pristate = ps; - else if (intel_plane->base.type == DRM_PLANE_TYPE_OVERLAY) + else if (plane->type == DRM_PLANE_TYPE_OVERLAY) sprstate = ps; - else if (intel_plane->base.type == DRM_PLANE_TYPE_CURSOR) + else if (plane->type == DRM_PLANE_TYPE_CURSOR) curstate = ps; } @@ -2384,11 +2381,9 @@ static int ilk_compute_pipe_wm(struct intel_crtc_state *cstate) if (pipe_wm->sprites_scaled) usable_level = 0; - ilk_compute_wm_level(dev_priv, intel_crtc, 0, cstate, - pristate, sprstate, curstate, &pipe_wm->raw_wm[0]); - memset(&pipe_wm->wm, 0, sizeof(pipe_wm->wm)); - pipe_wm->wm[0] = pipe_wm->raw_wm[0]; + ilk_compute_wm_level(dev_priv, intel_crtc, 0, cstate, + pristate, sprstate, curstate, &pipe_wm->wm[0]); if (IS_HASWELL(dev) || IS_BROADWELL(dev)) pipe_wm->linetime = hsw_compute_linetime_wm(cstate); @@ -2398,8 +2393,8 @@ static int ilk_compute_pipe_wm(struct intel_crtc_state *cstate) ilk_compute_wm_reg_maximums(dev, 1, &max); - for (level = 1; level <= max_level; level++) { - struct intel_wm_level *wm = &pipe_wm->raw_wm[level]; + for (level = 1; level <= usable_level; level++) { + struct intel_wm_level *wm = &pipe_wm->wm[level]; ilk_compute_wm_level(dev_priv, intel_crtc, level, cstate, pristate, sprstate, curstate, wm); @@ -2409,13 +2404,10 @@ static int ilk_compute_pipe_wm(struct intel_crtc_state *cstate) * register maximums since such watermarks are * always invalid. */ - if (level > usable_level) - continue; - - if (ilk_validate_wm_level(level, &max, wm)) - pipe_wm->wm[level] = *wm; - else - usable_level = level; + if (!ilk_validate_wm_level(level, &max, wm)) { + memset(wm, 0, sizeof(*wm)); + break; + } } return 0; diff --git a/drivers/gpu/drm/vmwgfx/vmwgfx_drv.c b/drivers/gpu/drm/vmwgfx/vmwgfx_drv.c index 36005bdf3749..29abd28c19b3 100644 --- a/drivers/gpu/drm/vmwgfx/vmwgfx_drv.c +++ b/drivers/gpu/drm/vmwgfx/vmwgfx_drv.c @@ -721,7 +721,7 @@ static int vmw_driver_load(struct drm_device *dev, unsigned long chipset) * allocation taken by fbdev */ if (!(dev_priv->capabilities & SVGA_CAP_3D)) - mem_size *= 2; + mem_size *= 3; dev_priv->max_mob_pages = mem_size * 1024 / PAGE_SIZE; dev_priv->prim_bb_mem = diff --git a/drivers/iio/magnetometer/mag3110.c b/drivers/iio/magnetometer/mag3110.c index f2b3bd7bf862..b4f643fb3b1e 100644 --- a/drivers/iio/magnetometer/mag3110.c +++ b/drivers/iio/magnetometer/mag3110.c @@ -222,29 +222,39 @@ static int mag3110_write_raw(struct iio_dev *indio_dev, int val, int val2, long mask) { struct mag3110_data *data = iio_priv(indio_dev); - int rate; + int rate, ret; - if (iio_buffer_enabled(indio_dev)) - return -EBUSY; + ret = iio_device_claim_direct_mode(indio_dev); + if (ret) + return ret; switch (mask) { case IIO_CHAN_INFO_SAMP_FREQ: rate = mag3110_get_samp_freq_index(data, val, val2); - if (rate < 0) - return -EINVAL; + if (rate < 0) { + ret = -EINVAL; + break; + } data->ctrl_reg1 &= ~MAG3110_CTRL_DR_MASK; data->ctrl_reg1 |= rate << MAG3110_CTRL_DR_SHIFT; - return i2c_smbus_write_byte_data(data->client, + ret = i2c_smbus_write_byte_data(data->client, MAG3110_CTRL_REG1, data->ctrl_reg1); + break; case IIO_CHAN_INFO_CALIBBIAS: - if (val < -10000 || val > 10000) - return -EINVAL; - return i2c_smbus_write_word_swapped(data->client, + if (val < -10000 || val > 10000) { + ret = -EINVAL; + break; + } + ret = i2c_smbus_write_word_swapped(data->client, MAG3110_OFF_X + 2 * chan->scan_index, val << 1); + break; default: - return -EINVAL; + ret = -EINVAL; + break; } + iio_device_release_direct_mode(indio_dev); + return ret; } static irqreturn_t mag3110_trigger_handler(int irq, void *p) diff --git a/drivers/iio/pressure/ms5611_core.c b/drivers/iio/pressure/ms5611_core.c index a74ed1f0c880..8cc7156b5ace 100644 --- a/drivers/iio/pressure/ms5611_core.c +++ b/drivers/iio/pressure/ms5611_core.c @@ -308,6 +308,7 @@ static int ms5611_write_raw(struct iio_dev *indio_dev, { struct ms5611_state *st = iio_priv(indio_dev); const struct ms5611_osr *osr = NULL; + int ret; if (mask != IIO_CHAN_INFO_OVERSAMPLING_RATIO) return -EINVAL; @@ -321,12 +322,11 @@ static int ms5611_write_raw(struct iio_dev *indio_dev, if (!osr) return -EINVAL; - mutex_lock(&st->lock); + ret = iio_device_claim_direct_mode(indio_dev); + if (ret) + return ret; - if (iio_buffer_enabled(indio_dev)) { - mutex_unlock(&st->lock); - return -EBUSY; - } + mutex_lock(&st->lock); if (chan->type == IIO_TEMP) st->temp_osr = osr; @@ -334,6 +334,8 @@ static int ms5611_write_raw(struct iio_dev *indio_dev, st->pressure_osr = osr; mutex_unlock(&st->lock); + iio_device_release_direct_mode(indio_dev); + return 0; } diff --git a/drivers/iio/proximity/sx9500.c b/drivers/iio/proximity/sx9500.c index 1f06282ec793..9ea147f1a50d 100644 --- a/drivers/iio/proximity/sx9500.c +++ b/drivers/iio/proximity/sx9500.c @@ -387,14 +387,18 @@ static int sx9500_read_raw(struct iio_dev *indio_dev, int *val, int *val2, long mask) { struct sx9500_data *data = iio_priv(indio_dev); + int ret; switch (chan->type) { case IIO_PROXIMITY: switch (mask) { case IIO_CHAN_INFO_RAW: - if (iio_buffer_enabled(indio_dev)) - return -EBUSY; - return sx9500_read_proximity(data, chan, val); + ret = iio_device_claim_direct_mode(indio_dev); + if (ret) + return ret; + ret = sx9500_read_proximity(data, chan, val); + iio_device_release_direct_mode(indio_dev); + return ret; case IIO_CHAN_INFO_SAMP_FREQ: return sx9500_read_samp_freq(data, val, val2); default: diff --git a/drivers/iio/trigger/iio-trig-interrupt.c b/drivers/iio/trigger/iio-trig-interrupt.c index 572bc6f02ca8..e18f12b74610 100644 --- a/drivers/iio/trigger/iio-trig-interrupt.c +++ b/drivers/iio/trigger/iio-trig-interrupt.c @@ -58,7 +58,7 @@ static int iio_interrupt_trigger_probe(struct platform_device *pdev) trig_info = kzalloc(sizeof(*trig_info), GFP_KERNEL); if (!trig_info) { ret = -ENOMEM; - goto error_put_trigger; + goto error_free_trigger; } iio_trigger_set_drvdata(trig, trig_info); trig_info->irq = irq; @@ -83,8 +83,8 @@ static int iio_interrupt_trigger_probe(struct platform_device *pdev) free_irq(irq, trig); error_free_trig_info: kfree(trig_info); -error_put_trigger: - iio_trigger_put(trig); +error_free_trigger: + iio_trigger_free(trig); error_ret: return ret; } @@ -99,7 +99,7 @@ static int iio_interrupt_trigger_remove(struct platform_device *pdev) iio_trigger_unregister(trig); free_irq(trig_info->irq, trig); kfree(trig_info); - iio_trigger_put(trig); + iio_trigger_free(trig); return 0; } diff --git a/drivers/iio/trigger/iio-trig-sysfs.c b/drivers/iio/trigger/iio-trig-sysfs.c index 3dfab2bc6d69..202e8b89caf2 100644 --- a/drivers/iio/trigger/iio-trig-sysfs.c +++ b/drivers/iio/trigger/iio-trig-sysfs.c @@ -174,7 +174,7 @@ static int iio_sysfs_trigger_probe(int id) return 0; out2: - iio_trigger_put(t->trig); + iio_trigger_free(t->trig); free_t: kfree(t); out1: diff --git a/drivers/infiniband/sw/rxe/rxe_req.c b/drivers/infiniband/sw/rxe/rxe_req.c index 9f46be52335e..9d084780ac91 100644 --- a/drivers/infiniband/sw/rxe/rxe_req.c +++ b/drivers/infiniband/sw/rxe/rxe_req.c @@ -633,6 +633,7 @@ int rxe_requester(void *arg) goto exit; } rmr->state = RXE_MEM_STATE_FREE; + rxe_drop_ref(rmr); wqe->state = wqe_state_done; wqe->status = IB_WC_SUCCESS; } else if (wqe->wr.opcode == IB_WR_REG_MR) { diff --git a/drivers/infiniband/sw/rxe/rxe_resp.c b/drivers/infiniband/sw/rxe/rxe_resp.c index 69ed4e0d7a0d..7705820cdac6 100644 --- a/drivers/infiniband/sw/rxe/rxe_resp.c +++ b/drivers/infiniband/sw/rxe/rxe_resp.c @@ -893,6 +893,7 @@ static enum resp_states do_complete(struct rxe_qp *qp, return RESPST_ERROR; } rmr->state = RXE_MEM_STATE_FREE; + rxe_drop_ref(rmr); } wc->qp = &qp->ibqp; diff --git a/drivers/infiniband/ulp/ipoib/ipoib_cm.c b/drivers/infiniband/ulp/ipoib/ipoib_cm.c index 0616a65f0d78..75761667be59 100644 --- a/drivers/infiniband/ulp/ipoib/ipoib_cm.c +++ b/drivers/infiniband/ulp/ipoib/ipoib_cm.c @@ -1392,7 +1392,7 @@ static void ipoib_cm_tx_reap(struct work_struct *work) while (!list_empty(&priv->cm.reap_list)) { p = list_entry(priv->cm.reap_list.next, typeof(*p), list); - list_del(&p->list); + list_del_init(&p->list); spin_unlock_irqrestore(&priv->lock, flags); netif_tx_unlock_bh(dev); ipoib_cm_tx_destroy(p); diff --git a/drivers/input/keyboard/mpr121_touchkey.c b/drivers/input/keyboard/mpr121_touchkey.c index 0fd612dd76ed..aaf43befffaa 100644 --- a/drivers/input/keyboard/mpr121_touchkey.c +++ b/drivers/input/keyboard/mpr121_touchkey.c @@ -87,7 +87,8 @@ static irqreturn_t mpr_touchkey_interrupt(int irq, void *dev_id) struct mpr121_touchkey *mpr121 = dev_id; struct i2c_client *client = mpr121->client; struct input_dev *input = mpr121->input_dev; - unsigned int key_num, key_val, pressed; + unsigned long bit_changed; + unsigned int key_num; int reg; reg = i2c_smbus_read_byte_data(client, ELE_TOUCH_STATUS_1_ADDR); @@ -105,18 +106,22 @@ static irqreturn_t mpr_touchkey_interrupt(int irq, void *dev_id) reg &= TOUCH_STATUS_MASK; /* use old press bit to figure out which bit changed */ - key_num = ffs(reg ^ mpr121->statusbits) - 1; - pressed = reg & (1 << key_num); + bit_changed = reg ^ mpr121->statusbits; mpr121->statusbits = reg; + for_each_set_bit(key_num, &bit_changed, mpr121->keycount) { + unsigned int key_val, pressed; - key_val = mpr121->keycodes[key_num]; + pressed = reg & BIT(key_num); + key_val = mpr121->keycodes[key_num]; - input_event(input, EV_MSC, MSC_SCAN, key_num); - input_report_key(input, key_val, pressed); - input_sync(input); + input_event(input, EV_MSC, MSC_SCAN, key_num); + input_report_key(input, key_val, pressed); + + dev_dbg(&client->dev, "key %d %d %s\n", key_num, key_val, + pressed ? "pressed" : "released"); - dev_dbg(&client->dev, "key %d %d %s\n", key_num, key_val, - pressed ? "pressed" : "released"); + } + input_sync(input); out: return IRQ_HANDLED; @@ -231,6 +236,7 @@ static int mpr_touchkey_probe(struct i2c_client *client, input_dev->id.bustype = BUS_I2C; input_dev->dev.parent = &client->dev; input_dev->evbit[0] = BIT_MASK(EV_KEY) | BIT_MASK(EV_REP); + input_set_capability(input_dev, EV_MSC, MSC_SCAN); input_dev->keycode = mpr121->keycodes; input_dev->keycodesize = sizeof(mpr121->keycodes[0]); diff --git a/drivers/input/mouse/elan_i2c_core.c b/drivers/input/mouse/elan_i2c_core.c index b8c50d883b2c..c9d491bc85e0 100644 --- a/drivers/input/mouse/elan_i2c_core.c +++ b/drivers/input/mouse/elan_i2c_core.c @@ -1240,6 +1240,7 @@ static const struct acpi_device_id elan_acpi_id[] = { { "ELAN0605", 0 }, { "ELAN0609", 0 }, { "ELAN060B", 0 }, + { "ELAN060C", 0 }, { "ELAN0611", 0 }, { "ELAN1000", 0 }, { } diff --git a/drivers/iommu/arm-smmu-v3.c b/drivers/iommu/arm-smmu-v3.c index e6f9b2d745ca..d3d975ae24b7 100644 --- a/drivers/iommu/arm-smmu-v3.c +++ b/drivers/iommu/arm-smmu-v3.c @@ -1040,13 +1040,8 @@ static void arm_smmu_write_strtab_ent(struct arm_smmu_device *smmu, u32 sid, } } - /* Nuke the existing Config, as we're going to rewrite it */ - val &= ~(STRTAB_STE_0_CFG_MASK << STRTAB_STE_0_CFG_SHIFT); - - if (ste->valid) - val |= STRTAB_STE_0_V; - else - val &= ~STRTAB_STE_0_V; + /* Nuke the existing STE_0 value, as we're going to rewrite it */ + val = ste->valid ? STRTAB_STE_0_V : 0; if (ste->bypass) { val |= disable_bypass ? STRTAB_STE_0_CFG_ABORT @@ -1081,7 +1076,6 @@ static void arm_smmu_write_strtab_ent(struct arm_smmu_device *smmu, u32 sid, val |= (ste->s1_cfg->cdptr_dma & STRTAB_STE_0_S1CTXPTR_MASK << STRTAB_STE_0_S1CTXPTR_SHIFT) | STRTAB_STE_0_CFG_S1_TRANS; - } if (ste->s2_cfg) { diff --git a/drivers/media/i2c/adv7604.c b/drivers/media/i2c/adv7604.c index 4003831de712..7b1935ab03c8 100644 --- a/drivers/media/i2c/adv7604.c +++ b/drivers/media/i2c/adv7604.c @@ -3118,6 +3118,9 @@ static int adv76xx_parse_dt(struct adv76xx_state *state) state->pdata.blank_data = 1; state->pdata.op_format_mode_sel = ADV7604_OP_FORMAT_MODE0; state->pdata.bus_order = ADV7604_BUS_ORDER_RGB; + state->pdata.dr_str_data = ADV76XX_DR_STR_MEDIUM_HIGH; + state->pdata.dr_str_clk = ADV76XX_DR_STR_MEDIUM_HIGH; + state->pdata.dr_str_sync = ADV76XX_DR_STR_MEDIUM_HIGH; return 0; } diff --git a/drivers/misc/cxl/pci.c b/drivers/misc/cxl/pci.c index fa4fe02cfef4..eef202d4399b 100644 --- a/drivers/misc/cxl/pci.c +++ b/drivers/misc/cxl/pci.c @@ -1620,6 +1620,9 @@ static void cxl_pci_remove_adapter(struct cxl *adapter) cxl_sysfs_adapter_remove(adapter); cxl_debugfs_adapter_remove(adapter); + /* Flush adapter datacache as its about to be removed */ + cxl_data_cache_flush(adapter); + cxl_deconfigure_adapter(adapter); device_unregister(&adapter->dev); diff --git a/drivers/net/can/c_can/c_can_pci.c b/drivers/net/can/c_can/c_can_pci.c index cf7c18947189..d065c0e2d18e 100644 --- a/drivers/net/can/c_can/c_can_pci.c +++ b/drivers/net/can/c_can/c_can_pci.c @@ -178,7 +178,6 @@ static int c_can_pci_probe(struct pci_dev *pdev, break; case BOSCH_D_CAN: priv->regs = reg_map_d_can; - priv->can.ctrlmode_supported |= CAN_CTRLMODE_3_SAMPLES; break; default: ret = -EINVAL; diff --git a/drivers/net/can/c_can/c_can_platform.c b/drivers/net/can/c_can/c_can_platform.c index e36d10520e24..717530eac70c 100644 --- a/drivers/net/can/c_can/c_can_platform.c +++ b/drivers/net/can/c_can/c_can_platform.c @@ -320,7 +320,6 @@ static int c_can_plat_probe(struct platform_device *pdev) break; case BOSCH_D_CAN: priv->regs = reg_map_d_can; - priv->can.ctrlmode_supported |= CAN_CTRLMODE_3_SAMPLES; priv->read_reg = c_can_plat_read_reg_aligned_to_16bit; priv->write_reg = c_can_plat_write_reg_aligned_to_16bit; priv->read_reg32 = d_can_plat_read_reg32; diff --git a/drivers/net/can/ifi_canfd/ifi_canfd.c b/drivers/net/can/ifi_canfd/ifi_canfd.c index 481895b2f9f4..c06ef438f23f 100644 --- a/drivers/net/can/ifi_canfd/ifi_canfd.c +++ b/drivers/net/can/ifi_canfd/ifi_canfd.c @@ -670,9 +670,9 @@ static void ifi_canfd_set_bittiming(struct net_device *ndev) priv->base + IFI_CANFD_FTIME); /* Configure transmitter delay */ - tdc = (dbt->brp * (dbt->phase_seg1 + 1)) & IFI_CANFD_TDELAY_MASK; - writel(IFI_CANFD_TDELAY_EN | IFI_CANFD_TDELAY_ABS | tdc, - priv->base + IFI_CANFD_TDELAY); + tdc = dbt->brp * (dbt->prop_seg + dbt->phase_seg1); + tdc &= IFI_CANFD_TDELAY_MASK; + writel(IFI_CANFD_TDELAY_EN | tdc, priv->base + IFI_CANFD_TDELAY); } static void ifi_canfd_set_filter(struct net_device *ndev, const u32 id, diff --git a/drivers/net/can/sun4i_can.c b/drivers/net/can/sun4i_can.c index b0c80859f746..1ac2090a1721 100644 --- a/drivers/net/can/sun4i_can.c +++ b/drivers/net/can/sun4i_can.c @@ -539,6 +539,13 @@ static int sun4i_can_err(struct net_device *dev, u8 isrc, u8 status) } stats->rx_over_errors++; stats->rx_errors++; + + /* reset the CAN IP by entering reset mode + * ignoring timeout error + */ + set_reset_mode(dev); + set_normal_mode(dev); + /* clear bit */ sun4i_can_write_cmdreg(priv, SUN4I_CMD_CLEAR_OR_FLAG); } @@ -653,8 +660,9 @@ static irqreturn_t sun4i_can_interrupt(int irq, void *dev_id) netif_wake_queue(dev); can_led_event(dev, CAN_LED_EVENT_TX); } - if (isrc & SUN4I_INT_RBUF_VLD) { - /* receive interrupt */ + if ((isrc & SUN4I_INT_RBUF_VLD) && + !(isrc & SUN4I_INT_DATA_OR)) { + /* receive interrupt - don't read if overrun occurred */ while (status & SUN4I_STA_RBUF_RDY) { /* RX buffer is not empty */ sun4i_can_rx(dev); diff --git a/drivers/net/usb/cdc_ncm.c b/drivers/net/usb/cdc_ncm.c index afbfc0f656f3..dc6d3b0a0be8 100644 --- a/drivers/net/usb/cdc_ncm.c +++ b/drivers/net/usb/cdc_ncm.c @@ -769,8 +769,10 @@ int cdc_ncm_bind_common(struct usbnet *dev, struct usb_interface *intf, u8 data_ u8 *buf; int len; int temp; + int err; u8 iface_no; struct usb_cdc_parsed_header hdr; + u16 curr_ntb_format; ctx = kzalloc(sizeof(*ctx), GFP_KERNEL); if (!ctx) @@ -875,6 +877,32 @@ int cdc_ncm_bind_common(struct usbnet *dev, struct usb_interface *intf, u8 data_ goto error2; } + /* + * Some Huawei devices have been observed to come out of reset in NDP32 mode. + * Let's check if this is the case, and set the device to NDP16 mode again if + * needed. + */ + if (ctx->drvflags & CDC_NCM_FLAG_RESET_NTB16) { + err = usbnet_read_cmd(dev, USB_CDC_GET_NTB_FORMAT, + USB_TYPE_CLASS | USB_DIR_IN | USB_RECIP_INTERFACE, + 0, iface_no, &curr_ntb_format, 2); + if (err < 0) { + goto error2; + } + + if (curr_ntb_format == USB_CDC_NCM_NTB32_FORMAT) { + dev_info(&intf->dev, "resetting NTB format to 16-bit"); + err = usbnet_write_cmd(dev, USB_CDC_SET_NTB_FORMAT, + USB_TYPE_CLASS | USB_DIR_OUT + | USB_RECIP_INTERFACE, + USB_CDC_NCM_NTB16_FORMAT, + iface_no, NULL, 0); + + if (err < 0) + goto error2; + } + } + cdc_ncm_find_endpoints(dev, ctx->data); cdc_ncm_find_endpoints(dev, ctx->control); if (!dev->in || !dev->out || !dev->status) { diff --git a/drivers/net/usb/huawei_cdc_ncm.c b/drivers/net/usb/huawei_cdc_ncm.c index 2680a65cd5e4..63f28908afda 100644 --- a/drivers/net/usb/huawei_cdc_ncm.c +++ b/drivers/net/usb/huawei_cdc_ncm.c @@ -80,6 +80,12 @@ static int huawei_cdc_ncm_bind(struct usbnet *usbnet_dev, * be at the end of the frame. */ drvflags |= CDC_NCM_FLAG_NDP_TO_END; + + /* Additionally, it has been reported that some Huawei E3372H devices, with + * firmware version 21.318.01.00.541, come out of reset in NTB32 format mode, hence + * needing to be set to the NTB16 one again. + */ + drvflags |= CDC_NCM_FLAG_RESET_NTB16; ret = cdc_ncm_bind_common(usbnet_dev, intf, 1, drvflags); if (ret) goto err; diff --git a/drivers/net/wireless/ath/wcn36xx/main.c b/drivers/net/wireless/ath/wcn36xx/main.c index e1d59da2ad20..ca8797c65312 100644 --- a/drivers/net/wireless/ath/wcn36xx/main.c +++ b/drivers/net/wireless/ath/wcn36xx/main.c @@ -1165,11 +1165,12 @@ static int wcn36xx_remove(struct platform_device *pdev) wcn36xx_dbg(WCN36XX_DBG_MAC, "platform remove\n"); release_firmware(wcn->nv); - mutex_destroy(&wcn->hal_mutex); ieee80211_unregister_hw(hw); iounmap(wcn->dxe_base); iounmap(wcn->ccu_base); + + mutex_destroy(&wcn->hal_mutex); ieee80211_free_hw(hw); return 0; diff --git a/drivers/net/wireless/broadcom/brcm80211/brcmfmac/cfg80211.c b/drivers/net/wireless/broadcom/brcm80211/brcmfmac/cfg80211.c index 27960b0bfbcd..425a89c635d0 100644 --- a/drivers/net/wireless/broadcom/brcm80211/brcmfmac/cfg80211.c +++ b/drivers/net/wireless/broadcom/brcm80211/brcmfmac/cfg80211.c @@ -6572,8 +6572,7 @@ static int brcmf_setup_wiphy(struct wiphy *wiphy, struct brcmf_if *ifp) wiphy->bands[NL80211_BAND_5GHZ] = band; } } - err = brcmf_setup_wiphybands(wiphy); - return err; + return 0; } static s32 brcmf_config_dongle(struct brcmf_cfg80211_info *cfg) @@ -6938,6 +6937,12 @@ struct brcmf_cfg80211_info *brcmf_cfg80211_attach(struct brcmf_pub *drvr, goto priv_out; } + err = brcmf_setup_wiphybands(wiphy); + if (err) { + brcmf_err("Setting wiphy bands failed (%d)\n", err); + goto wiphy_unreg_out; + } + /* If cfg80211 didn't disable 40MHz HT CAP in wiphy_register(), * setup 40MHz in 2GHz band and enable OBSS scanning. */ diff --git a/drivers/net/wireless/marvell/libertas/cmd.c b/drivers/net/wireless/marvell/libertas/cmd.c index 301170cccfff..033ff881c751 100644 --- a/drivers/net/wireless/marvell/libertas/cmd.c +++ b/drivers/net/wireless/marvell/libertas/cmd.c @@ -305,7 +305,7 @@ int lbs_cmd_802_11_sleep_params(struct lbs_private *priv, uint16_t cmd_action, } lbs_deb_leave_args(LBS_DEB_CMD, "ret %d", ret); - return 0; + return ret; } static int lbs_wait_for_ds_awake(struct lbs_private *priv) diff --git a/drivers/net/wireless/ralink/rt2x00/rt2800usb.c b/drivers/net/wireless/ralink/rt2x00/rt2800usb.c index 4b0bb6b4f6f1..c636e6065548 100644 --- a/drivers/net/wireless/ralink/rt2x00/rt2800usb.c +++ b/drivers/net/wireless/ralink/rt2x00/rt2800usb.c @@ -646,10 +646,9 @@ static void rt2800usb_txdone_nostatus(struct rt2x00_dev *rt2x00dev) !test_bit(ENTRY_DATA_STATUS_PENDING, &entry->flags)) break; - if (test_bit(ENTRY_DATA_IO_FAILED, &entry->flags)) + if (test_bit(ENTRY_DATA_IO_FAILED, &entry->flags) || + rt2800usb_entry_txstatus_timeout(entry)) rt2x00lib_txdone_noinfo(entry, TXDONE_FAILURE); - else if (rt2800usb_entry_txstatus_timeout(entry)) - rt2x00lib_txdone_noinfo(entry, TXDONE_UNKNOWN); else break; } diff --git a/drivers/net/xen-netback/netback.c b/drivers/net/xen-netback/netback.c index d9b5b73c35a0..a7bdb1ffac2e 100644 --- a/drivers/net/xen-netback/netback.c +++ b/drivers/net/xen-netback/netback.c @@ -67,6 +67,7 @@ module_param(rx_drain_timeout_msecs, uint, 0444); unsigned int rx_stall_timeout_msecs = 60000; module_param(rx_stall_timeout_msecs, uint, 0444); +#define MAX_QUEUES_DEFAULT 8 unsigned int xenvif_max_queues; module_param_named(max_queues, xenvif_max_queues, uint, 0644); MODULE_PARM_DESC(max_queues, @@ -1626,11 +1627,12 @@ static int __init netback_init(void) if (!xen_domain()) return -ENODEV; - /* Allow as many queues as there are CPUs if user has not + /* Allow as many queues as there are CPUs but max. 8 if user has not * specified a value. */ if (xenvif_max_queues == 0) - xenvif_max_queues = num_online_cpus(); + xenvif_max_queues = min_t(unsigned int, MAX_QUEUES_DEFAULT, + num_online_cpus()); if (fatal_skb_slots < XEN_NETBK_LEGACY_SLOTS_MAX) { pr_info("fatal_skb_slots too small (%d), bump it to XEN_NETBK_LEGACY_SLOTS_MAX (%d)\n", diff --git a/drivers/pci/host/pci-mvebu.c b/drivers/pci/host/pci-mvebu.c index 45a89d969700..90e0b6f134ad 100644 --- a/drivers/pci/host/pci-mvebu.c +++ b/drivers/pci/host/pci-mvebu.c @@ -133,6 +133,12 @@ struct mvebu_pcie { int nports; }; +struct mvebu_pcie_window { + phys_addr_t base; + phys_addr_t remap; + size_t size; +}; + /* Structure representing one PCIe interface */ struct mvebu_pcie_port { char *name; @@ -150,10 +156,8 @@ struct mvebu_pcie_port { struct mvebu_sw_pci_bridge bridge; struct device_node *dn; struct mvebu_pcie *pcie; - phys_addr_t memwin_base; - size_t memwin_size; - phys_addr_t iowin_base; - size_t iowin_size; + struct mvebu_pcie_window memwin; + struct mvebu_pcie_window iowin; u32 saved_pcie_stat; }; @@ -379,23 +383,45 @@ static void mvebu_pcie_add_windows(struct mvebu_pcie_port *port, } } +static void mvebu_pcie_set_window(struct mvebu_pcie_port *port, + unsigned int target, unsigned int attribute, + const struct mvebu_pcie_window *desired, + struct mvebu_pcie_window *cur) +{ + if (desired->base == cur->base && desired->remap == cur->remap && + desired->size == cur->size) + return; + + if (cur->size != 0) { + mvebu_pcie_del_windows(port, cur->base, cur->size); + cur->size = 0; + cur->base = 0; + + /* + * If something tries to change the window while it is enabled + * the change will not be done atomically. That would be + * difficult to do in the general case. + */ + } + + if (desired->size == 0) + return; + + mvebu_pcie_add_windows(port, target, attribute, desired->base, + desired->size, desired->remap); + *cur = *desired; +} + static void mvebu_pcie_handle_iobase_change(struct mvebu_pcie_port *port) { - phys_addr_t iobase; + struct mvebu_pcie_window desired = {}; /* Are the new iobase/iolimit values invalid? */ if (port->bridge.iolimit < port->bridge.iobase || port->bridge.iolimitupper < port->bridge.iobaseupper || !(port->bridge.command & PCI_COMMAND_IO)) { - - /* If a window was configured, remove it */ - if (port->iowin_base) { - mvebu_pcie_del_windows(port, port->iowin_base, - port->iowin_size); - port->iowin_base = 0; - port->iowin_size = 0; - } - + mvebu_pcie_set_window(port, port->io_target, port->io_attr, + &desired, &port->iowin); return; } @@ -412,32 +438,27 @@ static void mvebu_pcie_handle_iobase_change(struct mvebu_pcie_port *port) * specifications. iobase is the bus address, port->iowin_base * is the CPU address. */ - iobase = ((port->bridge.iobase & 0xF0) << 8) | - (port->bridge.iobaseupper << 16); - port->iowin_base = port->pcie->io.start + iobase; - port->iowin_size = ((0xFFF | ((port->bridge.iolimit & 0xF0) << 8) | - (port->bridge.iolimitupper << 16)) - - iobase) + 1; - - mvebu_pcie_add_windows(port, port->io_target, port->io_attr, - port->iowin_base, port->iowin_size, - iobase); + desired.remap = ((port->bridge.iobase & 0xF0) << 8) | + (port->bridge.iobaseupper << 16); + desired.base = port->pcie->io.start + desired.remap; + desired.size = ((0xFFF | ((port->bridge.iolimit & 0xF0) << 8) | + (port->bridge.iolimitupper << 16)) - + desired.remap) + + 1; + + mvebu_pcie_set_window(port, port->io_target, port->io_attr, &desired, + &port->iowin); } static void mvebu_pcie_handle_membase_change(struct mvebu_pcie_port *port) { + struct mvebu_pcie_window desired = {.remap = MVEBU_MBUS_NO_REMAP}; + /* Are the new membase/memlimit values invalid? */ if (port->bridge.memlimit < port->bridge.membase || !(port->bridge.command & PCI_COMMAND_MEMORY)) { - - /* If a window was configured, remove it */ - if (port->memwin_base) { - mvebu_pcie_del_windows(port, port->memwin_base, - port->memwin_size); - port->memwin_base = 0; - port->memwin_size = 0; - } - + mvebu_pcie_set_window(port, port->mem_target, port->mem_attr, + &desired, &port->memwin); return; } @@ -447,14 +468,12 @@ static void mvebu_pcie_handle_membase_change(struct mvebu_pcie_port *port) * window to setup, according to the PCI-to-PCI bridge * specifications. */ - port->memwin_base = ((port->bridge.membase & 0xFFF0) << 16); - port->memwin_size = - (((port->bridge.memlimit & 0xFFF0) << 16) | 0xFFFFF) - - port->memwin_base + 1; - - mvebu_pcie_add_windows(port, port->mem_target, port->mem_attr, - port->memwin_base, port->memwin_size, - MVEBU_MBUS_NO_REMAP); + desired.base = ((port->bridge.membase & 0xFFF0) << 16); + desired.size = (((port->bridge.memlimit & 0xFFF0) << 16) | 0xFFFFF) - + desired.base + 1; + + mvebu_pcie_set_window(port, port->mem_target, port->mem_attr, &desired, + &port->memwin); } /* diff --git a/drivers/pinctrl/intel/pinctrl-baytrail.c b/drivers/pinctrl/intel/pinctrl-baytrail.c index 5419de8e20b1..0a965026b134 100644 --- a/drivers/pinctrl/intel/pinctrl-baytrail.c +++ b/drivers/pinctrl/intel/pinctrl-baytrail.c @@ -1466,7 +1466,7 @@ static void byt_gpio_dbg_show(struct seq_file *s, struct gpio_chip *chip) val & BYT_INPUT_EN ? " " : "in", val & BYT_OUTPUT_EN ? " " : "out", val & BYT_LEVEL ? "hi" : "lo", - comm->pad_map[i], comm->pad_map[i] * 32, + comm->pad_map[i], comm->pad_map[i] * 16, conf0 & 0x7, conf0 & BYT_TRIG_NEG ? " fall" : " ", conf0 & BYT_TRIG_POS ? " rise" : " ", diff --git a/drivers/platform/x86/hp-wmi.c b/drivers/platform/x86/hp-wmi.c index 96ffda493266..454cb2ee3cee 100644 --- a/drivers/platform/x86/hp-wmi.c +++ b/drivers/platform/x86/hp-wmi.c @@ -248,7 +248,7 @@ static int hp_wmi_display_state(void) int ret = hp_wmi_perform_query(HPWMI_DISPLAY_QUERY, 0, &state, sizeof(state), sizeof(state)); if (ret) - return -EINVAL; + return ret < 0 ? ret : -EINVAL; return state; } @@ -258,7 +258,7 @@ static int hp_wmi_hddtemp_state(void) int ret = hp_wmi_perform_query(HPWMI_HDDTEMP_QUERY, 0, &state, sizeof(state), sizeof(state)); if (ret) - return -EINVAL; + return ret < 0 ? ret : -EINVAL; return state; } @@ -268,7 +268,7 @@ static int hp_wmi_als_state(void) int ret = hp_wmi_perform_query(HPWMI_ALS_QUERY, 0, &state, sizeof(state), sizeof(state)); if (ret) - return -EINVAL; + return ret < 0 ? ret : -EINVAL; return state; } @@ -279,7 +279,7 @@ static int hp_wmi_dock_state(void) sizeof(state), sizeof(state)); if (ret) - return -EINVAL; + return ret < 0 ? ret : -EINVAL; return state & 0x1; } @@ -290,7 +290,7 @@ static int hp_wmi_tablet_state(void) int ret = hp_wmi_perform_query(HPWMI_HARDWARE_QUERY, 0, &state, sizeof(state), sizeof(state)); if (ret) - return ret; + return ret < 0 ? ret : -EINVAL; return (state & 0x4) ? 1 : 0; } @@ -323,7 +323,7 @@ static int __init hp_wmi_enable_hotkeys(void) int ret = hp_wmi_perform_query(HPWMI_BIOS_QUERY, 1, &value, sizeof(value), 0); if (ret) - return -EINVAL; + return ret < 0 ? ret : -EINVAL; return 0; } @@ -336,7 +336,7 @@ static int hp_wmi_set_block(void *data, bool blocked) ret = hp_wmi_perform_query(HPWMI_WIRELESS_QUERY, 1, &query, sizeof(query), 0); if (ret) - return -EINVAL; + return ret < 0 ? ret : -EINVAL; return 0; } @@ -428,7 +428,7 @@ static int hp_wmi_post_code_state(void) int ret = hp_wmi_perform_query(HPWMI_POSTCODEERROR_QUERY, 0, &state, sizeof(state), sizeof(state)); if (ret) - return -EINVAL; + return ret < 0 ? ret : -EINVAL; return state; } @@ -494,7 +494,7 @@ static ssize_t set_als(struct device *dev, struct device_attribute *attr, int ret = hp_wmi_perform_query(HPWMI_ALS_QUERY, 1, &tmp, sizeof(tmp), sizeof(tmp)); if (ret) - return -EINVAL; + return ret < 0 ? ret : -EINVAL; return count; } @@ -515,7 +515,7 @@ static ssize_t set_postcode(struct device *dev, struct device_attribute *attr, ret = hp_wmi_perform_query(HPWMI_POSTCODEERROR_QUERY, 1, &tmp, sizeof(tmp), sizeof(tmp)); if (ret) - return -EINVAL; + return ret < 0 ? ret : -EINVAL; return count; } @@ -572,10 +572,12 @@ static void hp_wmi_notify(u32 value, void *context) switch (event_id) { case HPWMI_DOCK_EVENT: - input_report_switch(hp_wmi_input_dev, SW_DOCK, - hp_wmi_dock_state()); - input_report_switch(hp_wmi_input_dev, SW_TABLET_MODE, - hp_wmi_tablet_state()); + if (test_bit(SW_DOCK, hp_wmi_input_dev->swbit)) + input_report_switch(hp_wmi_input_dev, SW_DOCK, + hp_wmi_dock_state()); + if (test_bit(SW_TABLET_MODE, hp_wmi_input_dev->swbit)) + input_report_switch(hp_wmi_input_dev, SW_TABLET_MODE, + hp_wmi_tablet_state()); input_sync(hp_wmi_input_dev); break; case HPWMI_PARK_HDD: @@ -644,6 +646,7 @@ static int __init hp_wmi_input_setup(void) { acpi_status status; int err; + int val; hp_wmi_input_dev = input_allocate_device(); if (!hp_wmi_input_dev) @@ -654,17 +657,26 @@ static int __init hp_wmi_input_setup(void) hp_wmi_input_dev->id.bustype = BUS_HOST; __set_bit(EV_SW, hp_wmi_input_dev->evbit); - __set_bit(SW_DOCK, hp_wmi_input_dev->swbit); - __set_bit(SW_TABLET_MODE, hp_wmi_input_dev->swbit); + + /* Dock */ + val = hp_wmi_dock_state(); + if (!(val < 0)) { + __set_bit(SW_DOCK, hp_wmi_input_dev->swbit); + input_report_switch(hp_wmi_input_dev, SW_DOCK, val); + } + + /* Tablet mode */ + val = hp_wmi_tablet_state(); + if (!(val < 0)) { + __set_bit(SW_TABLET_MODE, hp_wmi_input_dev->swbit); + input_report_switch(hp_wmi_input_dev, SW_TABLET_MODE, val); + } err = sparse_keymap_setup(hp_wmi_input_dev, hp_wmi_keymap, NULL); if (err) goto err_free_dev; /* Set initial hardware state */ - input_report_switch(hp_wmi_input_dev, SW_DOCK, hp_wmi_dock_state()); - input_report_switch(hp_wmi_input_dev, SW_TABLET_MODE, - hp_wmi_tablet_state()); input_sync(hp_wmi_input_dev); if (!hp_wmi_bios_2009_later() && hp_wmi_bios_2008_later()) @@ -950,10 +962,12 @@ static int hp_wmi_resume_handler(struct device *device) * changed. */ if (hp_wmi_input_dev) { - input_report_switch(hp_wmi_input_dev, SW_DOCK, - hp_wmi_dock_state()); - input_report_switch(hp_wmi_input_dev, SW_TABLET_MODE, - hp_wmi_tablet_state()); + if (test_bit(SW_DOCK, hp_wmi_input_dev->swbit)) + input_report_switch(hp_wmi_input_dev, SW_DOCK, + hp_wmi_dock_state()); + if (test_bit(SW_TABLET_MODE, hp_wmi_input_dev->swbit)) + input_report_switch(hp_wmi_input_dev, SW_TABLET_MODE, + hp_wmi_tablet_state()); input_sync(hp_wmi_input_dev); } diff --git a/drivers/s390/net/qeth_core.h b/drivers/s390/net/qeth_core.h index f3756ca6f349..d55e6438bb5e 100644 --- a/drivers/s390/net/qeth_core.h +++ b/drivers/s390/net/qeth_core.h @@ -921,7 +921,6 @@ void qeth_clear_thread_running_bit(struct qeth_card *, unsigned long); int qeth_core_hardsetup_card(struct qeth_card *); void qeth_print_status_message(struct qeth_card *); int qeth_init_qdio_queues(struct qeth_card *); -int qeth_send_startlan(struct qeth_card *); int qeth_send_ipa_cmd(struct qeth_card *, struct qeth_cmd_buffer *, int (*reply_cb) (struct qeth_card *, struct qeth_reply *, unsigned long), diff --git a/drivers/s390/net/qeth_core_main.c b/drivers/s390/net/qeth_core_main.c index e8c48309ebe9..21ef8023430f 100644 --- a/drivers/s390/net/qeth_core_main.c +++ b/drivers/s390/net/qeth_core_main.c @@ -2944,7 +2944,7 @@ int qeth_send_ipa_cmd(struct qeth_card *card, struct qeth_cmd_buffer *iob, } EXPORT_SYMBOL_GPL(qeth_send_ipa_cmd); -int qeth_send_startlan(struct qeth_card *card) +static int qeth_send_startlan(struct qeth_card *card) { int rc; struct qeth_cmd_buffer *iob; @@ -2957,7 +2957,6 @@ int qeth_send_startlan(struct qeth_card *card) rc = qeth_send_ipa_cmd(card, iob, NULL, NULL); return rc; } -EXPORT_SYMBOL_GPL(qeth_send_startlan); static int qeth_default_setadapterparms_cb(struct qeth_card *card, struct qeth_reply *reply, unsigned long data) @@ -5091,6 +5090,20 @@ int qeth_core_hardsetup_card(struct qeth_card *card) goto out; } + rc = qeth_send_startlan(card); + if (rc) { + QETH_DBF_TEXT_(SETUP, 2, "6err%d", rc); + if (rc == IPA_RC_LAN_OFFLINE) { + dev_warn(&card->gdev->dev, + "The LAN is offline\n"); + card->lan_online = 0; + } else { + rc = -ENODEV; + goto out; + } + } else + card->lan_online = 1; + card->options.ipa4.supported_funcs = 0; card->options.ipa6.supported_funcs = 0; card->options.adp.supported_funcs = 0; @@ -5102,14 +5115,14 @@ int qeth_core_hardsetup_card(struct qeth_card *card) if (qeth_is_supported(card, IPA_SETADAPTERPARMS)) { rc = qeth_query_setadapterparms(card); if (rc < 0) { - QETH_DBF_TEXT_(SETUP, 2, "6err%d", rc); + QETH_DBF_TEXT_(SETUP, 2, "7err%d", rc); goto out; } } if (qeth_adp_supported(card, IPA_SETADP_SET_DIAG_ASSIST)) { rc = qeth_query_setdiagass(card); if (rc < 0) { - QETH_DBF_TEXT_(SETUP, 2, "7err%d", rc); + QETH_DBF_TEXT_(SETUP, 2, "8err%d", rc); goto out; } } diff --git a/drivers/s390/net/qeth_l2_main.c b/drivers/s390/net/qeth_l2_main.c index 5d010aa89852..8530477caab8 100644 --- a/drivers/s390/net/qeth_l2_main.c +++ b/drivers/s390/net/qeth_l2_main.c @@ -1204,21 +1204,6 @@ static int __qeth_l2_set_online(struct ccwgroup_device *gdev, int recovery_mode) /* softsetup */ QETH_DBF_TEXT(SETUP, 2, "softsetp"); - rc = qeth_send_startlan(card); - if (rc) { - QETH_DBF_TEXT_(SETUP, 2, "1err%d", rc); - if (rc == 0xe080) { - dev_warn(&card->gdev->dev, - "The LAN is offline\n"); - card->lan_online = 0; - goto contin; - } - rc = -ENODEV; - goto out_remove; - } else - card->lan_online = 1; - -contin: if ((card->info.type == QETH_CARD_TYPE_OSD) || (card->info.type == QETH_CARD_TYPE_OSX)) { rc = qeth_l2_start_ipassists(card); diff --git a/drivers/s390/net/qeth_l3_main.c b/drivers/s390/net/qeth_l3_main.c index 171be5ec2ece..03a2619166ca 100644 --- a/drivers/s390/net/qeth_l3_main.c +++ b/drivers/s390/net/qeth_l3_main.c @@ -3230,21 +3230,6 @@ static int __qeth_l3_set_online(struct ccwgroup_device *gdev, int recovery_mode) /* softsetup */ QETH_DBF_TEXT(SETUP, 2, "softsetp"); - rc = qeth_send_startlan(card); - if (rc) { - QETH_DBF_TEXT_(SETUP, 2, "1err%d", rc); - if (rc == 0xe080) { - dev_warn(&card->gdev->dev, - "The LAN is offline\n"); - card->lan_online = 0; - goto contin; - } - rc = -ENODEV; - goto out_remove; - } else - card->lan_online = 1; - -contin: rc = qeth_l3_setadapter_parms(card); if (rc) QETH_DBF_TEXT_(SETUP, 2, "2err%04x", rc); diff --git a/drivers/s390/net/qeth_l3_sys.c b/drivers/s390/net/qeth_l3_sys.c index 0e00a5ce0f00..cffe42f5775d 100644 --- a/drivers/s390/net/qeth_l3_sys.c +++ b/drivers/s390/net/qeth_l3_sys.c @@ -692,15 +692,15 @@ static ssize_t qeth_l3_dev_vipa_add_show(char *buf, struct qeth_card *card, enum qeth_prot_versions proto) { struct qeth_ipaddr *ipaddr; - struct hlist_node *tmp; char addr_str[40]; + int str_len = 0; int entry_len; /* length of 1 entry string, differs between v4 and v6 */ - int i = 0; + int i; entry_len = (proto == QETH_PROT_IPV4)? 12 : 40; entry_len += 2; /* \n + terminator */ spin_lock_bh(&card->ip_lock); - hash_for_each_safe(card->ip_htable, i, tmp, ipaddr, hnode) { + hash_for_each(card->ip_htable, i, ipaddr, hnode) { if (ipaddr->proto != proto) continue; if (ipaddr->type != QETH_IP_TYPE_VIPA) @@ -708,16 +708,17 @@ static ssize_t qeth_l3_dev_vipa_add_show(char *buf, struct qeth_card *card, /* String must not be longer than PAGE_SIZE. So we check if * string length gets near PAGE_SIZE. Then we can savely display * the next IPv6 address (worst case, compared to IPv4) */ - if ((PAGE_SIZE - i) <= entry_len) + if ((PAGE_SIZE - str_len) <= entry_len) break; qeth_l3_ipaddr_to_string(proto, (const u8 *)&ipaddr->u, addr_str); - i += snprintf(buf + i, PAGE_SIZE - i, "%s\n", addr_str); + str_len += snprintf(buf + str_len, PAGE_SIZE - str_len, "%s\n", + addr_str); } spin_unlock_bh(&card->ip_lock); - i += snprintf(buf + i, PAGE_SIZE - i, "\n"); + str_len += snprintf(buf + str_len, PAGE_SIZE - str_len, "\n"); - return i; + return str_len; } static ssize_t qeth_l3_dev_vipa_add4_show(struct device *dev, @@ -854,15 +855,15 @@ static ssize_t qeth_l3_dev_rxip_add_show(char *buf, struct qeth_card *card, enum qeth_prot_versions proto) { struct qeth_ipaddr *ipaddr; - struct hlist_node *tmp; char addr_str[40]; + int str_len = 0; int entry_len; /* length of 1 entry string, differs between v4 and v6 */ - int i = 0; + int i; entry_len = (proto == QETH_PROT_IPV4)? 12 : 40; entry_len += 2; /* \n + terminator */ spin_lock_bh(&card->ip_lock); - hash_for_each_safe(card->ip_htable, i, tmp, ipaddr, hnode) { + hash_for_each(card->ip_htable, i, ipaddr, hnode) { if (ipaddr->proto != proto) continue; if (ipaddr->type != QETH_IP_TYPE_RXIP) @@ -870,16 +871,17 @@ static ssize_t qeth_l3_dev_rxip_add_show(char *buf, struct qeth_card *card, /* String must not be longer than PAGE_SIZE. So we check if * string length gets near PAGE_SIZE. Then we can savely display * the next IPv6 address (worst case, compared to IPv4) */ - if ((PAGE_SIZE - i) <= entry_len) + if ((PAGE_SIZE - str_len) <= entry_len) break; qeth_l3_ipaddr_to_string(proto, (const u8 *)&ipaddr->u, addr_str); - i += snprintf(buf + i, PAGE_SIZE - i, "%s\n", addr_str); + str_len += snprintf(buf + str_len, PAGE_SIZE - str_len, "%s\n", + addr_str); } spin_unlock_bh(&card->ip_lock); - i += snprintf(buf + i, PAGE_SIZE - i, "\n"); + str_len += snprintf(buf + str_len, PAGE_SIZE - str_len, "\n"); - return i; + return str_len; } static ssize_t qeth_l3_dev_rxip_add4_show(struct device *dev, diff --git a/drivers/staging/iio/trigger/iio-trig-bfin-timer.c b/drivers/staging/iio/trigger/iio-trig-bfin-timer.c index 38dca69a06eb..ce500a509aa2 100644 --- a/drivers/staging/iio/trigger/iio-trig-bfin-timer.c +++ b/drivers/staging/iio/trigger/iio-trig-bfin-timer.c @@ -260,7 +260,7 @@ static int iio_bfin_tmr_trigger_probe(struct platform_device *pdev) out1: iio_trigger_unregister(st->trig); out: - iio_trigger_put(st->trig); + iio_trigger_free(st->trig); return ret; } @@ -273,7 +273,7 @@ static int iio_bfin_tmr_trigger_remove(struct platform_device *pdev) peripheral_free(st->t->pin); free_irq(st->irq, st); iio_trigger_unregister(st->trig); - iio_trigger_put(st->trig); + iio_trigger_free(st->trig); return 0; } diff --git a/drivers/tty/serial/sh-sci.c b/drivers/tty/serial/sh-sci.c index 7e97a1ccab23..15eaea53b3df 100644 --- a/drivers/tty/serial/sh-sci.c +++ b/drivers/tty/serial/sh-sci.c @@ -193,18 +193,17 @@ static const struct plat_sci_reg sci_regmap[SCIx_NR_REGTYPES][SCIx_NR_REGS] = { }, /* - * Common definitions for legacy IrDA ports, dependent on - * regshift value. + * Common definitions for legacy IrDA ports. */ [SCIx_IRDA_REGTYPE] = { [SCSMR] = { 0x00, 8 }, - [SCBRR] = { 0x01, 8 }, - [SCSCR] = { 0x02, 8 }, - [SCxTDR] = { 0x03, 8 }, - [SCxSR] = { 0x04, 8 }, - [SCxRDR] = { 0x05, 8 }, - [SCFCR] = { 0x06, 8 }, - [SCFDR] = { 0x07, 16 }, + [SCBRR] = { 0x02, 8 }, + [SCSCR] = { 0x04, 8 }, + [SCxTDR] = { 0x06, 8 }, + [SCxSR] = { 0x08, 16 }, + [SCxRDR] = { 0x0a, 8 }, + [SCFCR] = { 0x0c, 8 }, + [SCFDR] = { 0x0e, 16 }, [SCTFDR] = sci_reg_invalid, [SCRFDR] = sci_reg_invalid, [SCSPTR] = sci_reg_invalid, diff --git a/drivers/usb/core/hcd.c b/drivers/usb/core/hcd.c index 882fc4e08284..fcc7aa248ce7 100644 --- a/drivers/usb/core/hcd.c +++ b/drivers/usb/core/hcd.c @@ -3023,6 +3023,7 @@ void usb_remove_hcd(struct usb_hcd *hcd) } usb_put_invalidate_rhdev(hcd); + hcd->flags = 0; } EXPORT_SYMBOL_GPL(usb_remove_hcd); diff --git a/drivers/video/fbdev/pmag-ba-fb.c b/drivers/video/fbdev/pmag-ba-fb.c index 5872bc4af3ce..df02fb4b7fd1 100644 --- a/drivers/video/fbdev/pmag-ba-fb.c +++ b/drivers/video/fbdev/pmag-ba-fb.c @@ -129,7 +129,7 @@ static struct fb_ops pmagbafb_ops = { /* * Turn the hardware cursor off. */ -static void __init pmagbafb_erase_cursor(struct fb_info *info) +static void pmagbafb_erase_cursor(struct fb_info *info) { struct pmagbafb_par *par = info->par; diff --git a/include/dt-bindings/clock/exynos5433.h b/include/dt-bindings/clock/exynos5433.h index 4fa6bb2136e3..be39d23e6a32 100644 --- a/include/dt-bindings/clock/exynos5433.h +++ b/include/dt-bindings/clock/exynos5433.h @@ -771,7 +771,10 @@ #define CLK_PCLK_DECON 113 -#define DISP_NR_CLK 114 +#define CLK_PHYCLK_MIPIDPHY0_BITCLKDIV8_PHY 114 +#define CLK_PHYCLK_MIPIDPHY0_RXCLKESC0_PHY 115 + +#define DISP_NR_CLK 116 /* CMU_AUD */ #define CLK_MOUT_AUD_PLL_USER 1 diff --git a/include/linux/phy.h b/include/linux/phy.h index 8431c8c0c320..a04d69ab7c34 100644 --- a/include/linux/phy.h +++ b/include/linux/phy.h @@ -142,11 +142,7 @@ static inline const char *phy_modes(phy_interface_t interface) /* Used when trying to connect to a specific phy (mii bus id:phy device id) */ #define PHY_ID_FMT "%s:%02x" -/* - * Need to be a little smaller than phydev->dev.bus_id to leave room - * for the ":%02x" - */ -#define MII_BUS_ID_SIZE (20 - 3) +#define MII_BUS_ID_SIZE 61 /* Or MII_ADDR_C45 into regnum for read/write on mii_bus to enable the 21 bit IEEE 802.3ae clause 45 addressing mode used by 10GIGE phy chips. */ @@ -602,7 +598,7 @@ struct phy_driver { /* A Structure for boards to register fixups with the PHY Lib */ struct phy_fixup { struct list_head list; - char bus_id[20]; + char bus_id[MII_BUS_ID_SIZE + 3]; u32 phy_uid; u32 phy_uid_mask; int (*run)(struct phy_device *phydev); diff --git a/include/linux/preempt.h b/include/linux/preempt.h index 75e4e30677f1..7eeceac52dea 100644 --- a/include/linux/preempt.h +++ b/include/linux/preempt.h @@ -65,19 +65,24 @@ /* * Are we doing bottom half or hardware interrupt processing? - * Are we in a softirq context? Interrupt context? - * in_softirq - Are we currently processing softirq or have bh disabled? - * in_serving_softirq - Are we currently processing softirq? + * + * in_irq() - We're in (hard) IRQ context + * in_softirq() - We have BH disabled, or are processing softirqs + * in_interrupt() - We're in NMI,IRQ,SoftIRQ context or have BH disabled + * in_serving_softirq() - We're in softirq context + * in_nmi() - We're in NMI context + * in_task() - We're in task context + * + * Note: due to the BH disabled confusion: in_softirq(),in_interrupt() really + * should not be used in new code. */ #define in_irq() (hardirq_count()) #define in_softirq() (softirq_count()) #define in_interrupt() (irq_count()) #define in_serving_softirq() (softirq_count() & SOFTIRQ_OFFSET) - -/* - * Are we in NMI context? - */ -#define in_nmi() (preempt_count() & NMI_MASK) +#define in_nmi() (preempt_count() & NMI_MASK) +#define in_task() (!(preempt_count() & \ + (NMI_MASK | HARDIRQ_MASK | SOFTIRQ_OFFSET))) /* * The preempt_count offset after preempt_disable(); diff --git a/include/linux/usb/cdc_ncm.h b/include/linux/usb/cdc_ncm.h index 00d232406f18..b0fad110817b 100644 --- a/include/linux/usb/cdc_ncm.h +++ b/include/linux/usb/cdc_ncm.h @@ -83,6 +83,7 @@ /* Driver flags */ #define CDC_NCM_FLAG_NDP_TO_END 0x02 /* NDP is placed at end of frame */ #define CDC_MBIM_FLAG_AVOID_ALTSETTING_TOGGLE 0x04 /* Avoid altsetting toggle during init */ +#define CDC_NCM_FLAG_RESET_NTB16 0x08 /* set NDP16 one more time after altsetting switch */ #define cdc_ncm_comm_intf_is_mbim(x) ((x)->desc.bInterfaceSubClass == USB_CDC_SUBCLASS_MBIM && \ (x)->desc.bInterfaceProtocol == USB_CDC_PROTO_NONE) diff --git a/include/sound/seq_kernel.h b/include/sound/seq_kernel.h index feb58d455560..4b9ee3009aa0 100644 --- a/include/sound/seq_kernel.h +++ b/include/sound/seq_kernel.h @@ -49,7 +49,8 @@ typedef union snd_seq_timestamp snd_seq_timestamp_t; #define SNDRV_SEQ_DEFAULT_CLIENT_EVENTS 200 /* max delivery path length */ -#define SNDRV_SEQ_MAX_HOPS 10 +/* NOTE: this shouldn't be greater than MAX_LOCKDEP_SUBCLASSES */ +#define SNDRV_SEQ_MAX_HOPS 8 /* max size of event size */ #define SNDRV_SEQ_MAX_EVENT_LEN 0x3fffffff diff --git a/kernel/sched/core.c b/kernel/sched/core.c index 02e7ad860b52..78181c03d9c7 100644 --- a/kernel/sched/core.c +++ b/kernel/sched/core.c @@ -7961,6 +7961,7 @@ void sched_move_task(struct task_struct *tsk) struct rq *rq; rq = task_rq_lock(tsk, &rf); + update_rq_clock(rq); running = task_current(rq, tsk); queued = task_on_rq_queued(tsk); diff --git a/kernel/workqueue_internal.h b/kernel/workqueue_internal.h index 8635417c587b..29fa81f0f51a 100644 --- a/kernel/workqueue_internal.h +++ b/kernel/workqueue_internal.h @@ -9,6 +9,7 @@ #include <linux/workqueue.h> #include <linux/kthread.h> +#include <linux/preempt.h> struct worker_pool; @@ -59,7 +60,7 @@ struct worker { */ static inline struct worker *current_wq_worker(void) { - if (current->flags & PF_WQ_WORKER) + if (in_task() && (current->flags & PF_WQ_WORKER)) return kthread_data(current); return NULL; } diff --git a/lib/asn1_decoder.c b/lib/asn1_decoder.c index fef5d2e114be..1ef0cec38d78 100644 --- a/lib/asn1_decoder.c +++ b/lib/asn1_decoder.c @@ -228,7 +228,7 @@ int asn1_ber_decoder(const struct asn1_decoder *decoder, hdr = 2; /* Extract a tag from the data */ - if (unlikely(dp >= datalen - 1)) + if (unlikely(datalen - dp < 2)) goto data_overrun_error; tag = data[dp++]; if (unlikely((tag & 0x1f) == ASN1_LONG_TAG)) @@ -274,7 +274,7 @@ int asn1_ber_decoder(const struct asn1_decoder *decoder, int n = len - 0x80; if (unlikely(n > 2)) goto length_too_long; - if (unlikely(dp >= datalen - n)) + if (unlikely(n > datalen - dp)) goto data_overrun_error; hdr += n; for (len = 0; n > 0; n--) { diff --git a/net/dsa/Kconfig b/net/dsa/Kconfig index 96e47c539bee..39bb5b3a82f2 100644 --- a/net/dsa/Kconfig +++ b/net/dsa/Kconfig @@ -1,12 +1,13 @@ config HAVE_NET_DSA def_bool y - depends on NETDEVICES && !S390 + depends on INET && NETDEVICES && !S390 # Drivers must select NET_DSA and the appropriate tagging format config NET_DSA tristate "Distributed Switch Architecture" - depends on HAVE_NET_DSA && NET_SWITCHDEV + depends on HAVE_NET_DSA + select NET_SWITCHDEV select PHYLIB ---help--- Say Y if you want to enable support for the hardware switches supported diff --git a/net/ipv4/ah4.c b/net/ipv4/ah4.c index f2a71025a770..22377c8ff14b 100644 --- a/net/ipv4/ah4.c +++ b/net/ipv4/ah4.c @@ -270,6 +270,9 @@ static void ah_input_done(struct crypto_async_request *base, int err) int ihl = ip_hdrlen(skb); int ah_hlen = (ah->hdrlen + 2) << 2; + if (err) + goto out; + work_iph = AH_SKB_CB(skb)->tmp; auth_data = ah_tmp_auth(work_iph, ihl); icv = ah_tmp_icv(ahp->ahash, auth_data, ahp->icv_trunc_len); diff --git a/net/netfilter/nft_meta.c b/net/netfilter/nft_meta.c index 6c1e0246706e..7c3395513ff0 100644 --- a/net/netfilter/nft_meta.c +++ b/net/netfilter/nft_meta.c @@ -159,8 +159,34 @@ void nft_meta_get_eval(const struct nft_expr *expr, else *dest = PACKET_BROADCAST; break; + case NFPROTO_NETDEV: + switch (skb->protocol) { + case htons(ETH_P_IP): { + int noff = skb_network_offset(skb); + struct iphdr *iph, _iph; + + iph = skb_header_pointer(skb, noff, + sizeof(_iph), &_iph); + if (!iph) + goto err; + + if (ipv4_is_multicast(iph->daddr)) + *dest = PACKET_MULTICAST; + else + *dest = PACKET_BROADCAST; + + break; + } + case htons(ETH_P_IPV6): + *dest = PACKET_MULTICAST; + break; + default: + WARN_ON_ONCE(1); + goto err; + } + break; default: - WARN_ON(1); + WARN_ON_ONCE(1); goto err; } break; diff --git a/security/apparmor/lsm.c b/security/apparmor/lsm.c index 41b8cb115801..7d3a98b2d55a 100644 --- a/security/apparmor/lsm.c +++ b/security/apparmor/lsm.c @@ -671,9 +671,9 @@ enum profile_mode aa_g_profile_mode = APPARMOR_ENFORCE; module_param_call(mode, param_set_mode, param_get_mode, &aa_g_profile_mode, S_IRUSR | S_IWUSR); -#ifdef CONFIG_SECURITY_APPARMOR_HASH /* whether policy verification hashing is enabled */ bool aa_g_hash_policy = IS_ENABLED(CONFIG_SECURITY_APPARMOR_HASH_DEFAULT); +#ifdef CONFIG_SECURITY_APPARMOR_HASH module_param_named(hash_policy, aa_g_hash_policy, aabool, S_IRUSR | S_IWUSR); #endif diff --git a/security/keys/trusted.c b/security/keys/trusted.c index f4db42e669e9..4ba2f6b91242 100644 --- a/security/keys/trusted.c +++ b/security/keys/trusted.c @@ -70,7 +70,7 @@ static int TSS_sha1(const unsigned char *data, unsigned int datalen, } ret = crypto_shash_digest(&sdesc->shash, data, datalen, digest); - kfree(sdesc); + kzfree(sdesc); return ret; } @@ -114,7 +114,7 @@ static int TSS_rawhmac(unsigned char *digest, const unsigned char *key, if (!ret) ret = crypto_shash_final(&sdesc->shash, digest); out: - kfree(sdesc); + kzfree(sdesc); return ret; } @@ -165,7 +165,7 @@ static int TSS_authhmac(unsigned char *digest, const unsigned char *key, paramdigest, TPM_NONCE_SIZE, h1, TPM_NONCE_SIZE, h2, 1, &c, 0, 0); out: - kfree(sdesc); + kzfree(sdesc); return ret; } @@ -246,7 +246,7 @@ static int TSS_checkhmac1(unsigned char *buffer, if (memcmp(testhmac, authdata, SHA1_DIGEST_SIZE)) ret = -EINVAL; out: - kfree(sdesc); + kzfree(sdesc); return ret; } @@ -347,7 +347,7 @@ static int TSS_checkhmac2(unsigned char *buffer, if (memcmp(testhmac2, authdata2, SHA1_DIGEST_SIZE)) ret = -EINVAL; out: - kfree(sdesc); + kzfree(sdesc); return ret; } @@ -564,7 +564,7 @@ static int tpm_seal(struct tpm_buf *tb, uint16_t keytype, *bloblen = storedsize; } out: - kfree(td); + kzfree(td); return ret; } @@ -678,7 +678,7 @@ static int key_seal(struct trusted_key_payload *p, if (ret < 0) pr_info("trusted_key: srkseal failed (%d)\n", ret); - kfree(tb); + kzfree(tb); return ret; } @@ -703,7 +703,7 @@ static int key_unseal(struct trusted_key_payload *p, /* pull migratable flag out of sealed key */ p->migratable = p->key[--p->key_len]; - kfree(tb); + kzfree(tb); return ret; } @@ -1037,12 +1037,12 @@ static int trusted_instantiate(struct key *key, if (!ret && options->pcrlock) ret = pcrlock(options->pcrlock); out: - kfree(datablob); - kfree(options); + kzfree(datablob); + kzfree(options); if (!ret) rcu_assign_keypointer(key, payload); else - kfree(payload); + kzfree(payload); return ret; } @@ -1051,8 +1051,7 @@ static void trusted_rcu_free(struct rcu_head *rcu) struct trusted_key_payload *p; p = container_of(rcu, struct trusted_key_payload, rcu); - memset(p->key, 0, p->key_len); - kfree(p); + kzfree(p); } /* @@ -1094,13 +1093,13 @@ static int trusted_update(struct key *key, struct key_preparsed_payload *prep) ret = datablob_parse(datablob, new_p, new_o); if (ret != Opt_update) { ret = -EINVAL; - kfree(new_p); + kzfree(new_p); goto out; } if (!new_o->keyhandle) { ret = -EINVAL; - kfree(new_p); + kzfree(new_p); goto out; } @@ -1114,22 +1113,22 @@ static int trusted_update(struct key *key, struct key_preparsed_payload *prep) ret = key_seal(new_p, new_o); if (ret < 0) { pr_info("trusted_key: key_seal failed (%d)\n", ret); - kfree(new_p); + kzfree(new_p); goto out; } if (new_o->pcrlock) { ret = pcrlock(new_o->pcrlock); if (ret < 0) { pr_info("trusted_key: pcrlock failed (%d)\n", ret); - kfree(new_p); + kzfree(new_p); goto out; } } rcu_assign_keypointer(key, new_p); call_rcu(&p->rcu, trusted_rcu_free); out: - kfree(datablob); - kfree(new_o); + kzfree(datablob); + kzfree(new_o); return ret; } @@ -1148,34 +1147,30 @@ static long trusted_read(const struct key *key, char __user *buffer, p = rcu_dereference_key(key); if (!p) return -EINVAL; - if (!buffer || buflen <= 0) - return 2 * p->blob_len; - ascii_buf = kmalloc(2 * p->blob_len, GFP_KERNEL); - if (!ascii_buf) - return -ENOMEM; - bufp = ascii_buf; - for (i = 0; i < p->blob_len; i++) - bufp = hex_byte_pack(bufp, p->blob[i]); - if ((copy_to_user(buffer, ascii_buf, 2 * p->blob_len)) != 0) { - kfree(ascii_buf); - return -EFAULT; + if (buffer && buflen >= 2 * p->blob_len) { + ascii_buf = kmalloc(2 * p->blob_len, GFP_KERNEL); + if (!ascii_buf) + return -ENOMEM; + + bufp = ascii_buf; + for (i = 0; i < p->blob_len; i++) + bufp = hex_byte_pack(bufp, p->blob[i]); + if (copy_to_user(buffer, ascii_buf, 2 * p->blob_len) != 0) { + kzfree(ascii_buf); + return -EFAULT; + } + kzfree(ascii_buf); } - kfree(ascii_buf); return 2 * p->blob_len; } /* - * trusted_destroy - before freeing the key, clear the decrypted data + * trusted_destroy - clear and free the key's payload */ static void trusted_destroy(struct key *key) { - struct trusted_key_payload *p = key->payload.data[0]; - - if (!p) - return; - memset(p->key, 0, p->key_len); - kfree(key->payload.data[0]); + kzfree(key->payload.data[0]); } struct key_type key_type_trusted = { diff --git a/sound/core/seq/oss/seq_oss_midi.c b/sound/core/seq/oss/seq_oss_midi.c index aaff9ee32695..b30b2139e3f0 100644 --- a/sound/core/seq/oss/seq_oss_midi.c +++ b/sound/core/seq/oss/seq_oss_midi.c @@ -612,9 +612,7 @@ send_midi_event(struct seq_oss_devinfo *dp, struct snd_seq_event *ev, struct seq if (!dp->timer->running) len = snd_seq_oss_timer_start(dp->timer); if (ev->type == SNDRV_SEQ_EVENT_SYSEX) { - if ((ev->flags & SNDRV_SEQ_EVENT_LENGTH_MASK) == SNDRV_SEQ_EVENT_LENGTH_VARIABLE) - snd_seq_oss_readq_puts(dp->readq, mdev->seq_device, - ev->data.ext.ptr, ev->data.ext.len); + snd_seq_oss_readq_sysex(dp->readq, mdev->seq_device, ev); } else { len = snd_midi_event_decode(mdev->coder, msg, sizeof(msg), ev); if (len > 0) diff --git a/sound/core/seq/oss/seq_oss_readq.c b/sound/core/seq/oss/seq_oss_readq.c index 046cb586fb2f..06b21226b4e7 100644 --- a/sound/core/seq/oss/seq_oss_readq.c +++ b/sound/core/seq/oss/seq_oss_readq.c @@ -117,6 +117,35 @@ snd_seq_oss_readq_puts(struct seq_oss_readq *q, int dev, unsigned char *data, in return 0; } +/* + * put MIDI sysex bytes; the event buffer may be chained, thus it has + * to be expanded via snd_seq_dump_var_event(). + */ +struct readq_sysex_ctx { + struct seq_oss_readq *readq; + int dev; +}; + +static int readq_dump_sysex(void *ptr, void *buf, int count) +{ + struct readq_sysex_ctx *ctx = ptr; + + return snd_seq_oss_readq_puts(ctx->readq, ctx->dev, buf, count); +} + +int snd_seq_oss_readq_sysex(struct seq_oss_readq *q, int dev, + struct snd_seq_event *ev) +{ + struct readq_sysex_ctx ctx = { + .readq = q, + .dev = dev + }; + + if ((ev->flags & SNDRV_SEQ_EVENT_LENGTH_MASK) != SNDRV_SEQ_EVENT_LENGTH_VARIABLE) + return 0; + return snd_seq_dump_var_event(ev, readq_dump_sysex, &ctx); +} + /* * copy an event to input queue: * return zero if enqueued diff --git a/sound/core/seq/oss/seq_oss_readq.h b/sound/core/seq/oss/seq_oss_readq.h index f1463f1f449e..8d033ca2d23f 100644 --- a/sound/core/seq/oss/seq_oss_readq.h +++ b/sound/core/seq/oss/seq_oss_readq.h @@ -44,6 +44,8 @@ void snd_seq_oss_readq_delete(struct seq_oss_readq *q); void snd_seq_oss_readq_clear(struct seq_oss_readq *readq); unsigned int snd_seq_oss_readq_poll(struct seq_oss_readq *readq, struct file *file, poll_table *wait); int snd_seq_oss_readq_puts(struct seq_oss_readq *readq, int dev, unsigned char *data, int len); +int snd_seq_oss_readq_sysex(struct seq_oss_readq *q, int dev, + struct snd_seq_event *ev); int snd_seq_oss_readq_put_event(struct seq_oss_readq *readq, union evrec *ev); int snd_seq_oss_readq_put_timestamp(struct seq_oss_readq *readq, unsigned long curt, int seq_mode); int snd_seq_oss_readq_pick(struct seq_oss_readq *q, union evrec *rec); diff --git a/sound/soc/sunxi/sun4i-spdif.c b/sound/soc/sunxi/sun4i-spdif.c index 88fbb3a1e660..048de15d6937 100644 --- a/sound/soc/sunxi/sun4i-spdif.c +++ b/sound/soc/sunxi/sun4i-spdif.c @@ -403,14 +403,6 @@ static struct snd_soc_dai_driver sun4i_spdif_dai = { .name = "spdif", }; -static const struct snd_soc_dapm_widget dit_widgets[] = { - SND_SOC_DAPM_OUTPUT("spdif-out"), -}; - -static const struct snd_soc_dapm_route dit_routes[] = { - { "spdif-out", NULL, "Playback" }, -}; - static const struct of_device_id sun4i_spdif_of_match[] = { { .compatible = "allwinner,sun4i-a10-spdif", }, { .compatible = "allwinner,sun6i-a31-spdif", }, diff --git a/tools/testing/selftests/firmware/fw_filesystem.sh b/tools/testing/selftests/firmware/fw_filesystem.sh index 5c495ad7958a..d8ac9ba67688 100755 --- a/tools/testing/selftests/firmware/fw_filesystem.sh +++ b/tools/testing/selftests/firmware/fw_filesystem.sh @@ -48,18 +48,18 @@ echo "ABCD0123" >"$FW" NAME=$(basename "$FW") -if printf '\000' >"$DIR"/trigger_request; then +if printf '\000' >"$DIR"/trigger_request 2> /dev/null; then echo "$0: empty filename should not succeed" >&2 exit 1 fi -if printf '\000' >"$DIR"/trigger_async_request; then +if printf '\000' >"$DIR"/trigger_async_request 2> /dev/null; then echo "$0: empty filename should not succeed (async)" >&2 exit 1 fi # Request a firmware that doesn't exist, it should fail. -if echo -n "nope-$NAME" >"$DIR"/trigger_request; then +if echo -n "nope-$NAME" >"$DIR"/trigger_request 2> /dev/null; then echo "$0: firmware shouldn't have loaded" >&2 exit 1 fi diff --git a/tools/testing/selftests/firmware/fw_userhelper.sh b/tools/testing/selftests/firmware/fw_userhelper.sh index b9983f8e09f6..01c626a1f226 100755 --- a/tools/testing/selftests/firmware/fw_userhelper.sh +++ b/tools/testing/selftests/firmware/fw_userhelper.sh @@ -64,9 +64,33 @@ trap "test_finish" EXIT echo "ABCD0123" >"$FW" NAME=$(basename "$FW") +DEVPATH="$DIR"/"nope-$NAME"/loading + # Test failure when doing nothing (timeout works). -echo 1 >/sys/class/firmware/timeout -echo -n "$NAME" >"$DIR"/trigger_request +echo -n 2 >/sys/class/firmware/timeout +echo -n "nope-$NAME" >"$DIR"/trigger_request 2>/dev/null & + +# Give the kernel some time to load the loading file, must be less +# than the timeout above. +sleep 1 +if [ ! -f $DEVPATH ]; then + echo "$0: fallback mechanism immediately cancelled" + echo "" + echo "The file never appeared: $DEVPATH" + echo "" + echo "This might be a distribution udev rule setup by your distribution" + echo "to immediately cancel all fallback requests, this must be" + echo "removed before running these tests. To confirm look for" + echo "a firmware rule like /lib/udev/rules.d/50-firmware.rules" + echo "and see if you have something like this:" + echo "" + echo "SUBSYSTEM==\"firmware\", ACTION==\"add\", ATTR{loading}=\"-1\"" + echo "" + echo "If you do remove this file or comment out this line before" + echo "proceeding with these tests." + exit 1 +fi + if diff -q "$FW" /dev/test_firmware >/dev/null ; then echo "$0: firmware was not expected to match" >&2 exit 1

7 years, 11 months

1
0
0 0

[Linux-stable-mirror] [PATCH 4.9.y v2] netfilter: nat: Revert "netfilter: nat: convert nat bysrc hash to rhashtable" hash to rhashtable"

by Florian Westphal

commit e1bf1687740ce1a3598a1c5e452b852ff2190682 upstream. This reverts commit 870190a9ec9075205c0fa795a09fa931694a3ff1. It was not a good idea. The custom hash table was a much better fit for this purpose. A fast lookup is not essential, in fact for most cases there is no lookup at all because original tuple is not taken and can be used as-is. What needs to be fast is insertion and deletion. rhlist removal however requires a rhlist walk. We can have thousands of entries in such a list if source port/addresses are reused for multiple flows, if this happens removal requests are so expensive that deletions of a few thousand flows can take several seconds(!). The advantages that we got from rhashtable are: 1) table auto-sizing 2) multiple locks 1) would be nice to have, but it is not essential as we have at most one lookup per new flow, so even a million flows in the bysource table are not a problem compared to current deletion cost. 2) is easy to add to custom hash table. I tried to add hlist_node to rhlist to speed up rhltable_remove but this isn't doable without changing semantics. rhltable_remove_fast will check that the to-be-deleted object is part of the table and that requires a list walk that we want to avoid. Furthermore, using hlist_node increases size of struct rhlist_head, which in turn increases nf_conn size. Link: https://bugzilla.kernel.org/show_bug.cgi?id=196821 Reported-by: Ivan Babrou <ibobrik(a)gmail.com> Signed-off-by: Florian Westphal <fw(a)strlen.de> Signed-off-by: Pablo Neira Ayuso <pablo(a)netfilter.org> --- Hi Greg, this is a 4.9.y backport of the same revert that already went into 4.13.y; please consider applying this. Note: you need to 'git cherry-pick 6e699867f84c0f358fed233fe6162173aca28e04' first, else this won't apply (and cause crash if newly allocated conntrack is dropped right away). include/net/netfilter/nf_conntrack.h | 3 +- include/net/netfilter/nf_nat.h | 1 - net/netfilter/nf_nat_core.c | 134 +++++++++++++++-------------------- 3 files changed, 57 insertions(+), 81 deletions(-) diff --git a/include/net/netfilter/nf_conntrack.h b/include/net/netfilter/nf_conntrack.h index d9d52c020a70..9ae819e27940 100644 --- a/include/net/netfilter/nf_conntrack.h +++ b/include/net/netfilter/nf_conntrack.h @@ -17,7 +17,6 @@ #include <linux/bitops.h> #include <linux/compiler.h> #include <linux/atomic.h> -#include <linux/rhashtable.h> #include <linux/netfilter/nf_conntrack_tcp.h> #include <linux/netfilter/nf_conntrack_dccp.h> @@ -101,7 +100,7 @@ struct nf_conn { possible_net_t ct_net; #if IS_ENABLED(CONFIG_NF_NAT) - struct rhlist_head nat_bysource; + struct hlist_node nat_bysource; #endif /* all members below initialized via memset */ u8 __nfct_init_offset[0]; diff --git a/include/net/netfilter/nf_nat.h b/include/net/netfilter/nf_nat.h index c327a431a6f3..02515f7ed4cc 100644 --- a/include/net/netfilter/nf_nat.h +++ b/include/net/netfilter/nf_nat.h @@ -1,6 +1,5 @@ #ifndef _NF_NAT_H #define _NF_NAT_H -#include <linux/rhashtable.h> #include <linux/netfilter_ipv4.h> #include <linux/netfilter/nf_nat.h> #include <net/netfilter/nf_conntrack_tuple.h> diff --git a/net/netfilter/nf_nat_core.c b/net/netfilter/nf_nat_core.c index e9fcb58d4eba..624d6e4dcd5c 100644 --- a/net/netfilter/nf_nat_core.c +++ b/net/netfilter/nf_nat_core.c @@ -30,19 +30,17 @@ #include <net/netfilter/nf_conntrack_zones.h> #include <linux/netfilter/nf_nat.h> +static DEFINE_SPINLOCK(nf_nat_lock); + static DEFINE_MUTEX(nf_nat_proto_mutex); static const struct nf_nat_l3proto __rcu *nf_nat_l3protos[NFPROTO_NUMPROTO] __read_mostly; static const struct nf_nat_l4proto __rcu **nf_nat_l4protos[NFPROTO_NUMPROTO] __read_mostly; -struct nf_nat_conn_key { - const struct net *net; - const struct nf_conntrack_tuple *tuple; - const struct nf_conntrack_zone *zone; -}; - -static struct rhltable nf_nat_bysource_table; +static struct hlist_head *nf_nat_bysource __read_mostly; +static unsigned int nf_nat_htable_size __read_mostly; +static unsigned int nf_nat_hash_rnd __read_mostly; inline const struct nf_nat_l3proto * __nf_nat_l3proto_find(u8 family) @@ -121,17 +119,19 @@ int nf_xfrm_me_harder(struct net *net, struct sk_buff *skb, unsigned int family) EXPORT_SYMBOL(nf_xfrm_me_harder); #endif /* CONFIG_XFRM */ -static u32 nf_nat_bysource_hash(const void *data, u32 len, u32 seed) +/* We keep an extra hash for each conntrack, for fast searching. */ +static inline unsigned int +hash_by_src(const struct net *n, const struct nf_conntrack_tuple *tuple) { - const struct nf_conntrack_tuple *t; - const struct nf_conn *ct = data; + unsigned int hash; + + get_random_once(&nf_nat_hash_rnd, sizeof(nf_nat_hash_rnd)); - t = &ct->tuplehash[IP_CT_DIR_ORIGINAL].tuple; /* Original src, to ensure we map it consistently if poss. */ + hash = jhash2((u32 *)&tuple->src, sizeof(tuple->src) / sizeof(u32), + tuple->dst.protonum ^ nf_nat_hash_rnd ^ net_hash_mix(n)); - seed ^= net_hash_mix(nf_ct_net(ct)); - return jhash2((const u32 *)&t->src, sizeof(t->src) / sizeof(u32), - t->dst.protonum ^ seed); + return reciprocal_scale(hash, nf_nat_htable_size); } /* Is this tuple already taken? (not by us) */ @@ -187,28 +187,6 @@ same_src(const struct nf_conn *ct, t->src.u.all == tuple->src.u.all); } -static int nf_nat_bysource_cmp(struct rhashtable_compare_arg *arg, - const void *obj) -{ - const struct nf_nat_conn_key *key = arg->key; - const struct nf_conn *ct = obj; - - if (!same_src(ct, key->tuple) || - !net_eq(nf_ct_net(ct), key->net) || - !nf_ct_zone_equal(ct, key->zone, IP_CT_DIR_ORIGINAL)) - return 1; - - return 0; -} - -static struct rhashtable_params nf_nat_bysource_params = { - .head_offset = offsetof(struct nf_conn, nat_bysource), - .obj_hashfn = nf_nat_bysource_hash, - .obj_cmpfn = nf_nat_bysource_cmp, - .nelem_hint = 256, - .min_size = 1024, -}; - /* Only called for SRC manip */ static int find_appropriate_src(struct net *net, @@ -219,26 +197,22 @@ find_appropriate_src(struct net *net, struct nf_conntrack_tuple *result, const struct nf_nat_range *range) { + unsigned int h = hash_by_src(net, tuple); const struct nf_conn *ct; - struct nf_nat_conn_key key = { - .net = net, - .tuple = tuple, - .zone = zone - }; - struct rhlist_head *hl, *h; - - hl = rhltable_lookup(&nf_nat_bysource_table, &key, - nf_nat_bysource_params); - rhl_for_each_entry_rcu(ct, h, hl, nat_bysource) { - nf_ct_invert_tuplepr(result, - &ct->tuplehash[IP_CT_DIR_REPLY].tuple); - result->dst = tuple->dst; - - if (in_range(l3proto, l4proto, result, range)) - return 1; + hlist_for_each_entry_rcu(ct, &nf_nat_bysource[h], nat_bysource) { + if (same_src(ct, tuple) && + net_eq(net, nf_ct_net(ct)) && + nf_ct_zone_equal(ct, zone, IP_CT_DIR_ORIGINAL)) { + /* Copy source part from reply tuple. */ + nf_ct_invert_tuplepr(result, + &ct->tuplehash[IP_CT_DIR_REPLY].tuple); + result->dst = tuple->dst; + + if (in_range(l3proto, l4proto, result, range)) + return 1; + } } - return 0; } @@ -411,6 +385,7 @@ nf_nat_setup_info(struct nf_conn *ct, const struct nf_nat_range *range, enum nf_nat_manip_type maniptype) { + struct net *net = nf_ct_net(ct); struct nf_conntrack_tuple curr_tuple, new_tuple; struct nf_conn_nat *nat; @@ -452,19 +427,16 @@ nf_nat_setup_info(struct nf_conn *ct, } if (maniptype == NF_NAT_MANIP_SRC) { - struct nf_nat_conn_key key = { - .net = nf_ct_net(ct), - .tuple = &ct->tuplehash[IP_CT_DIR_ORIGINAL].tuple, - .zone = nf_ct_zone(ct), - }; - int err; - - err = rhltable_insert_key(&nf_nat_bysource_table, - &key, - &ct->nat_bysource, - nf_nat_bysource_params); - if (err) - return NF_DROP; + unsigned int srchash; + + srchash = hash_by_src(net, + &ct->tuplehash[IP_CT_DIR_ORIGINAL].tuple); + spin_lock_bh(&nf_nat_lock); + /* nf_conntrack_alter_reply might re-allocate extension aera */ + nat = nfct_nat(ct); + hlist_add_head_rcu(&ct->nat_bysource, + &nf_nat_bysource[srchash]); + spin_unlock_bh(&nf_nat_lock); } /* It's done. */ @@ -572,9 +544,10 @@ static int nf_nat_proto_clean(struct nf_conn *ct, void *data) * Else, when the conntrack is destoyed, nf_nat_cleanup_conntrack() * will delete entry from already-freed table. */ + spin_lock_bh(&nf_nat_lock); + hlist_del_rcu(&ct->nat_bysource); ct->status &= ~IPS_NAT_DONE_MASK; - rhltable_remove(&nf_nat_bysource_table, &ct->nat_bysource, - nf_nat_bysource_params); + spin_unlock_bh(&nf_nat_lock); /* don't delete conntrack. Although that would make things a lot * simpler, we'd end up flushing all conntracks on nat rmmod. @@ -699,9 +672,11 @@ EXPORT_SYMBOL_GPL(nf_nat_l3proto_unregister); /* No one using conntrack by the time this called. */ static void nf_nat_cleanup_conntrack(struct nf_conn *ct) { - if (ct->status & IPS_SRC_NAT_DONE) - rhltable_remove(&nf_nat_bysource_table, &ct->nat_bysource, - nf_nat_bysource_params); + if (ct->status & IPS_SRC_NAT_DONE) { + spin_lock_bh(&nf_nat_lock); + hlist_del_rcu(&ct->nat_bysource); + spin_unlock_bh(&nf_nat_lock); + } } static struct nf_ct_ext_type nat_extend __read_mostly = { @@ -836,13 +811,16 @@ static int __init nf_nat_init(void) { int ret; - ret = rhltable_init(&nf_nat_bysource_table, &nf_nat_bysource_params); - if (ret) - return ret; + /* Leave them the same for the moment. */ + nf_nat_htable_size = nf_conntrack_htable_size; + + nf_nat_bysource = nf_ct_alloc_hashtable(&nf_nat_htable_size, 0); + if (!nf_nat_bysource) + return -ENOMEM; ret = nf_ct_extend_register(&nat_extend); if (ret < 0) { - rhltable_destroy(&nf_nat_bysource_table); + nf_ct_free_hashtable(nf_nat_bysource, nf_nat_htable_size); printk(KERN_ERR "nf_nat_core: Unable to register extension\n"); return ret; } @@ -866,7 +844,7 @@ static int __init nf_nat_init(void) return 0; cleanup_extend: - rhltable_destroy(&nf_nat_bysource_table); + nf_ct_free_hashtable(nf_nat_bysource, nf_nat_htable_size); nf_ct_extend_unregister(&nat_extend); return ret; } @@ -886,8 +864,8 @@ static void __exit nf_nat_cleanup(void) for (i = 0; i < NFPROTO_NUMPROTO; i++) kfree(nf_nat_l4protos[i]); - - rhltable_destroy(&nf_nat_bysource_table); + synchronize_net(); + nf_ct_free_hashtable(nf_nat_bysource, nf_nat_htable_size); } MODULE_LICENSE("GPL"); -- 2.13.6

7 years, 11 months

3
3
0 0

[Linux-stable-mirror] [git:media_tree/fixes] media: rc: sir_ir: detect presence of port

by Mauro Carvalho Chehab

This is an automatic generated email to let you know that the following patch were queued: Subject: media: rc: sir_ir: detect presence of port Author: Sean Young <sean(a)mess.org> Date: Wed Nov 8 16:19:45 2017 -0500 Without this test, sir_ir clumsy claims resources for a device which does not exist. The 0-day kernel test robot reports the following errors (in a loop): sir_ir sir_ir.0: Trapped in interrupt genirq: Flags mismatch irq 4. 00000000 (ttyS0) vs. 00000000 (sir_ir) When sir_ir is loaded with the default io and irq, the following happens: - sir_ir claims irq 4 - user space opens /dev/ttyS0 - in serial8250_do_startup(), some setup is done for ttyS0, which causes irq 4 to fire (in THRE test) - sir_ir does not realise it was not for it, and spins until the "trapped in interrupt" - now serial driver calls setup_irq() and fails and we get the "Flags mismatch" error. There is no port present at 0x3e8 so simply check for the presence of a port, as suggested by Linus. Reported-by: kbuild test robot <fengguang.wu(a)intel.com> Tested-by: Fengguang Wu <fengguang.wu(a)intel.com> Signed-off-by: Sean Young <sean(a)mess.org> Cc: <stable(a)vger.kernel.org> # 4.12+ Signed-off-by: Mauro Carvalho Chehab <mchehab(a)s-opensource.com> drivers/media/rc/sir_ir.c | 40 ++++++++++++++++++++++++++++++++++++---- 1 file changed, 36 insertions(+), 4 deletions(-) --- diff --git a/drivers/media/rc/sir_ir.c b/drivers/media/rc/sir_ir.c index 76120664b700..9ee2c9196b4d 100644 --- a/drivers/media/rc/sir_ir.c +++ b/drivers/media/rc/sir_ir.c @@ -57,7 +57,7 @@ static void add_read_queue(int flag, unsigned long val); static irqreturn_t sir_interrupt(int irq, void *dev_id); static void send_space(unsigned long len); static void send_pulse(unsigned long len); -static void init_hardware(void); +static int init_hardware(void); static void drop_hardware(void); /* Initialisation */ @@ -263,11 +263,36 @@ static void send_pulse(unsigned long len) } } -static void init_hardware(void) +static int init_hardware(void) { + u8 scratch, scratch2, scratch3; unsigned long flags; spin_lock_irqsave(&hardware_lock, flags); + + /* + * This is a simple port existence test, borrowed from the autoconfig + * function in drivers/tty/serial/8250/8250_port.c + */ + scratch = sinp(UART_IER); + soutp(UART_IER, 0); +#ifdef __i386__ + outb(0xff, 0x080); +#endif + scratch2 = sinp(UART_IER) & 0x0f; + soutp(UART_IER, 0x0f); +#ifdef __i386__ + outb(0x00, 0x080); +#endif + scratch3 = sinp(UART_IER) & 0x0f; + soutp(UART_IER, scratch); + if (scratch2 != 0 || scratch3 != 0x0f) { + /* we fail, there's nothing here */ + spin_unlock_irqrestore(&hardware_lock, flags); + pr_err("port existence test failed, cannot continue\n"); + return -ENODEV; + } + /* reset UART */ outb(0, io + UART_MCR); outb(0, io + UART_IER); @@ -285,6 +310,8 @@ static void init_hardware(void) /* turn on UART */ outb(UART_MCR_DTR | UART_MCR_RTS | UART_MCR_OUT2, io + UART_MCR); spin_unlock_irqrestore(&hardware_lock, flags); + + return 0; } static void drop_hardware(void) @@ -334,14 +361,19 @@ static int sir_ir_probe(struct platform_device *dev) pr_err("IRQ %d already in use.\n", irq); return retval; } + + retval = init_hardware(); + if (retval) { + del_timer_sync(&timerlist); + return retval; + } + pr_info("I/O port 0x%.4x, IRQ %d.\n", io, irq); retval = devm_rc_register_device(&sir_ir_dev->dev, rcdev); if (retval < 0) return retval; - init_hardware(); - return 0; }

7 years, 11 months

1
0
0 0

Re: [Linux-stable-mirror] [PATCH AUTOSEL for 4.9 44/56] ASoC: dwc: Fix PIO mode initialization

by Jose Abreu

Hi Mark, On 15-11-2017 10:54, Mark Brown wrote: > On Wed, Nov 15, 2017 at 02:45:45AM +0000, alexander.levin(a)verizon.com wrote: > >> We can no longer rely on the return value of >> devm_snd_dmaengine_pcm_register(...) to check if the DMA >> handle is declared in the DT. >> Previously this check activated PIO mode but currently >> dma_request_chan returns either a valid channel or -EPROBE_DEFER. > So when did the corresponding change to the dmaengine API go in? Looks like this was introduced in a8135d0d79e9 ("dmaengine: core: Introduce new, universal API to request a channel") but looking at soc-generic-dmaengine-pcm.c I see that this would never work anyway because dmaengine_pcm_request_chan_of() also returns either zero or -EPROBE_DEFER. > >> In order to activate PIO mode check instead if the interrupt >> line is declared. This reflects better what is documented in >> the DT bindings (see Documentation/devicetree/bindings/sound/ >> designware-i2s.txt). >> Also, initialize use_pio variable which was never being set >> causing PIO mode to never work. > Though if PIO mode never worked presumably this isn't that urgent... Yeah, and we also have this. Its my fault, I was using a different tree for testing at the time. But if we could backport this it would be nice because we and our clients use this PIO driver in ARC AXS101 Development Platform. (A side note is that the DT bindings were only recently introduced but I think its more easier to add the bindings instead of fixing this driver ...). Best Regards, Jose Miguel Abreu

7 years, 11 months

1
0
0 0

[Linux-stable-mirror] v3.18.81 build: 0 failures 1 warnings (v3.18.81)

by Build bot for Mark Brown

Tree/Branch: v3.18.81 Git describe: v3.18.81 Commit: 37cdf96914 Linux 3.18.81 Build Time: 54 min 54 sec Passed: 9 / 9 (100.00 %) Failed: 0 / 9 ( 0.00 %) Errors: 0 Warnings: 1 Section Mismatches: 0 ------------------------------------------------------------------------------- defconfigs with issues (other than build errors): 2 warnings 0 mismatches : x86_64-defconfig ------------------------------------------------------------------------------- Warnings Summary: 1 2 ../include/linux/ftrace.h:632:36: warning: calling '__builtin_return_address' with a nonzero argument is unsafe [-Wframe-address] =============================================================================== Detailed per-defconfig build reports below: ------------------------------------------------------------------------------- x86_64-defconfig : PASS, 0 errors, 2 warnings, 0 section mismatches Warnings: ../include/linux/ftrace.h:632:36: warning: calling '__builtin_return_address' with a nonzero argument is unsafe [-Wframe-address] ../include/linux/ftrace.h:632:36: warning: calling '__builtin_return_address' with a nonzero argument is unsafe [-Wframe-address] ------------------------------------------------------------------------------- Passed with no errors, warnings or mismatches: arm64-allnoconfig arm64-allmodconfig arm-multi_v5_defconfig arm-multi_v7_defconfig arm-allmodconfig arm-allnoconfig x86_64-allnoconfig arm64-defconfig close failed in file object destructor: sys.excepthook is missing lost sys.stderr

7 years, 11 months

1
0
0 0

[Linux-stable-mirror] [PATCH] phy: tegra: fix device-tree node lookups

by Johan Hovold

Fix child-node lookups during probe, which ended up searching the whole device tree depth-first starting at the parents rather than just matching on their children. To make things worse, some parent nodes could end up being being prematurely freed (by tegra_xusb_pad_register()) as of_find_node_by_name() drops a reference to its first argument. Fixes: 53d2a715c240 ("phy: Add Tegra XUSB pad controller support") Cc: stable <stable(a)vger.kernel.org> # 4.7 Cc: Thierry Reding <treding(a)nvidia.com> Signed-off-by: Johan Hovold <johan(a)kernel.org> --- drivers/phy/tegra/xusb.c | 58 ++++++++++++++++++++++++------------------------ 1 file changed, 29 insertions(+), 29 deletions(-) diff --git a/drivers/phy/tegra/xusb.c b/drivers/phy/tegra/xusb.c index 4307bf0013e1..63e916d4d069 100644 --- a/drivers/phy/tegra/xusb.c +++ b/drivers/phy/tegra/xusb.c @@ -75,14 +75,14 @@ MODULE_DEVICE_TABLE(of, tegra_xusb_padctl_of_match); static struct device_node * tegra_xusb_find_pad_node(struct tegra_xusb_padctl *padctl, const char *name) { - /* - * of_find_node_by_name() drops a reference, so make sure to grab one. - */ - struct device_node *np = of_node_get(padctl->dev->of_node); + struct device_node *pads, *np; + + pads = of_get_child_by_name(padctl->dev->of_node, "pads"); + if (!pads) + return NULL; - np = of_find_node_by_name(np, "pads"); - if (np) - np = of_find_node_by_name(np, name); + np = of_get_child_by_name(pads, name); + of_node_put(pads); return np; } @@ -90,16 +90,16 @@ tegra_xusb_find_pad_node(struct tegra_xusb_padctl *padctl, const char *name) static struct device_node * tegra_xusb_pad_find_phy_node(struct tegra_xusb_pad *pad, unsigned int index) { - /* - * of_find_node_by_name() drops a reference, so make sure to grab one. - */ - struct device_node *np = of_node_get(pad->dev.of_node); + struct device_node *np, *lanes; - np = of_find_node_by_name(np, "lanes"); - if (!np) + lanes = of_get_child_by_name(pad->dev.of_node, "lanes"); + if (!lanes) return NULL; - return of_find_node_by_name(np, pad->soc->lanes[index].name); + np = of_get_child_by_name(lanes, pad->soc->lanes[index].name); + of_node_put(lanes); + + return np; } static int @@ -195,7 +195,7 @@ int tegra_xusb_pad_register(struct tegra_xusb_pad *pad, unsigned int i; int err; - children = of_find_node_by_name(pad->dev.of_node, "lanes"); + children = of_get_child_by_name(pad->dev.of_node, "lanes"); if (!children) return -ENODEV; @@ -444,21 +444,21 @@ static struct device_node * tegra_xusb_find_port_node(struct tegra_xusb_padctl *padctl, const char *type, unsigned int index) { - /* - * of_find_node_by_name() drops a reference, so make sure to grab one. - */ - struct device_node *np = of_node_get(padctl->dev->of_node); + struct device_node *ports, *np; + char *name; - np = of_find_node_by_name(np, "ports"); - if (np) { - char *name; + ports = of_get_child_by_name(padctl->dev->of_node, "ports"); + if (!ports) + return NULL; - name = kasprintf(GFP_KERNEL, "%s-%u", type, index); - if (!name) - return ERR_PTR(-ENOMEM); - np = of_find_node_by_name(np, name); - kfree(name); + name = kasprintf(GFP_KERNEL, "%s-%u", type, index); + if (!name) { + of_node_put(ports); + return ERR_PTR(-ENOMEM); } + np = of_get_child_by_name(ports, name); + kfree(name); + of_node_put(ports); return np; } @@ -847,7 +847,7 @@ static void tegra_xusb_remove_ports(struct tegra_xusb_padctl *padctl) static int tegra_xusb_padctl_probe(struct platform_device *pdev) { - struct device_node *np = of_node_get(pdev->dev.of_node); + struct device_node *np = pdev->dev.of_node; const struct tegra_xusb_padctl_soc *soc; struct tegra_xusb_padctl *padctl; const struct of_device_id *match; @@ -855,7 +855,7 @@ static int tegra_xusb_padctl_probe(struct platform_device *pdev) int err; /* for backwards compatibility with old device trees */ - np = of_find_node_by_name(np, "pads"); + np = of_get_child_by_name(np, "pads"); if (!np) { dev_warn(&pdev->dev, "deprecated DT, using legacy driver\n"); return tegra_xusb_padctl_legacy_probe(pdev); -- 2.15.0

7 years, 11 months

1
0
0 0

Re: [Linux-stable-mirror] Linux 4.13.13

by Greg KH

diff --git a/Makefile b/Makefile index a7c847f495b0..1608a9b71381 100644 --- a/Makefile +++ b/Makefile @@ -1,6 +1,6 @@ VERSION = 4 PATCHLEVEL = 13 -SUBLEVEL = 12 +SUBLEVEL = 13 EXTRAVERSION = NAME = Fearless Coyote diff --git a/arch/arm/kernel/traps.c b/arch/arm/kernel/traps.c index 948c648fea00..0fcd82f01388 100644 --- a/arch/arm/kernel/traps.c +++ b/arch/arm/kernel/traps.c @@ -154,30 +154,26 @@ static void dump_mem(const char *lvl, const char *str, unsigned long bottom, set_fs(fs); } -static void dump_instr(const char *lvl, struct pt_regs *regs) +static void __dump_instr(const char *lvl, struct pt_regs *regs) { unsigned long addr = instruction_pointer(regs); const int thumb = thumb_mode(regs); const int width = thumb ? 4 : 8; - mm_segment_t fs; char str[sizeof("00000000 ") * 5 + 2 + 1], *p = str; int i; /* - * We need to switch to kernel mode so that we can use __get_user - * to safely read from kernel space. Note that we now dump the - * code first, just in case the backtrace kills us. + * Note that we now dump the code first, just in case the backtrace + * kills us. */ - fs = get_fs(); - set_fs(KERNEL_DS); for (i = -4; i < 1 + !!thumb; i++) { unsigned int val, bad; if (thumb) - bad = __get_user(val, &((u16 *)addr)[i]); + bad = get_user(val, &((u16 *)addr)[i]); else - bad = __get_user(val, &((u32 *)addr)[i]); + bad = get_user(val, &((u32 *)addr)[i]); if (!bad) p += sprintf(p, i == 0 ? "(%0*x) " : "%0*x ", @@ -188,8 +184,20 @@ static void dump_instr(const char *lvl, struct pt_regs *regs) } } printk("%sCode: %s\n", lvl, str); +} - set_fs(fs); +static void dump_instr(const char *lvl, struct pt_regs *regs) +{ + mm_segment_t fs; + + if (!user_mode(regs)) { + fs = get_fs(); + set_fs(KERNEL_DS); + __dump_instr(lvl, regs); + set_fs(fs); + } else { + __dump_instr(lvl, regs); + } } #ifdef CONFIG_ARM_UNWIND diff --git a/arch/mips/ar7/platform.c b/arch/mips/ar7/platform.c index df7acea3747a..4674f1efbe7a 100644 --- a/arch/mips/ar7/platform.c +++ b/arch/mips/ar7/platform.c @@ -575,6 +575,7 @@ static int __init ar7_register_uarts(void) uart_port.type = PORT_AR7; uart_port.uartclk = clk_get_rate(bus_clk) / 2; uart_port.iotype = UPIO_MEM32; + uart_port.flags = UPF_FIXED_TYPE; uart_port.regshift = 2; uart_port.line = 0; @@ -653,6 +654,10 @@ static int __init ar7_register_devices(void) u32 val; int res; + res = ar7_gpio_init(); + if (res) + pr_warn("unable to register gpios: %d\n", res); + res = ar7_register_uarts(); if (res) pr_err("unable to setup uart(s): %d\n", res); diff --git a/arch/mips/ar7/prom.c b/arch/mips/ar7/prom.c index 4fd83336131a..dd53987a690f 100644 --- a/arch/mips/ar7/prom.c +++ b/arch/mips/ar7/prom.c @@ -246,8 +246,6 @@ void __init prom_init(void) ar7_init_cmdline(fw_arg0, (char **)fw_arg1); ar7_init_env((struct env_var *)fw_arg2); console_config(); - - ar7_gpio_init(); } #define PORT(offset) (KSEG1ADDR(AR7_REGS_UART0 + (offset * 4))) diff --git a/arch/mips/include/asm/mips-cm.h b/arch/mips/include/asm/mips-cm.h index cfdbab015769..163317fd3d7e 100644 --- a/arch/mips/include/asm/mips-cm.h +++ b/arch/mips/include/asm/mips-cm.h @@ -240,8 +240,8 @@ BUILD_CM_Cx_R_(tcid_8_priority, 0x80) #define CM_GCR_BASE_GCRBASE_MSK (_ULCAST_(0x1ffff) << 15) #define CM_GCR_BASE_CMDEFTGT_SHF 0 #define CM_GCR_BASE_CMDEFTGT_MSK (_ULCAST_(0x3) << 0) -#define CM_GCR_BASE_CMDEFTGT_DISABLED 0 -#define CM_GCR_BASE_CMDEFTGT_MEM 1 +#define CM_GCR_BASE_CMDEFTGT_MEM 0 +#define CM_GCR_BASE_CMDEFTGT_RESERVED 1 #define CM_GCR_BASE_CMDEFTGT_IOCU0 2 #define CM_GCR_BASE_CMDEFTGT_IOCU1 3 diff --git a/arch/mips/kernel/smp-bmips.c b/arch/mips/kernel/smp-bmips.c index 1b070a76fcdd..5e0d87f4958f 100644 --- a/arch/mips/kernel/smp-bmips.c +++ b/arch/mips/kernel/smp-bmips.c @@ -589,11 +589,11 @@ void __init bmips_cpu_setup(void) /* Flush and enable RAC */ cfg = __raw_readl(cbr + BMIPS_RAC_CONFIG); - __raw_writel(cfg | 0x100, BMIPS_RAC_CONFIG); + __raw_writel(cfg | 0x100, cbr + BMIPS_RAC_CONFIG); __raw_readl(cbr + BMIPS_RAC_CONFIG); cfg = __raw_readl(cbr + BMIPS_RAC_CONFIG); - __raw_writel(cfg | 0xf, BMIPS_RAC_CONFIG); + __raw_writel(cfg | 0xf, cbr + BMIPS_RAC_CONFIG); __raw_readl(cbr + BMIPS_RAC_CONFIG); cfg = __raw_readl(cbr + BMIPS_RAC_ADDRESS_RANGE); diff --git a/arch/powerpc/kvm/book3s_64_mmu_hv.c b/arch/powerpc/kvm/book3s_64_mmu_hv.c index b42812e014c0..1fcc30ff9569 100644 --- a/arch/powerpc/kvm/book3s_64_mmu_hv.c +++ b/arch/powerpc/kvm/book3s_64_mmu_hv.c @@ -645,6 +645,16 @@ int kvmppc_book3s_hv_page_fault(struct kvm_run *run, struct kvm_vcpu *vcpu, hnow_v = hpte_new_to_old_v(hnow_v, hnow_r); hnow_r = hpte_new_to_old_r(hnow_r); } + + /* + * If the HPT is being resized, don't update the HPTE, + * instead let the guest retry after the resize operation is complete. + * The synchronization for hpte_setup_done test vs. set is provided + * by the HPTE lock. + */ + if (!kvm->arch.hpte_setup_done) + goto out_unlock; + if ((hnow_v & ~HPTE_V_HVLOCK) != hpte[0] || hnow_r != hpte[1] || rev->guest_rpte != hpte[2]) /* HPTE has been changed under us; let the guest retry */ diff --git a/arch/powerpc/kvm/book3s_hv.c b/arch/powerpc/kvm/book3s_hv.c index 9ecd9aea0b54..c059541743f0 100644 --- a/arch/powerpc/kvm/book3s_hv.c +++ b/arch/powerpc/kvm/book3s_hv.c @@ -2688,11 +2688,14 @@ static noinline void kvmppc_run_core(struct kvmppc_vcore *vc) * Hard-disable interrupts, and check resched flag and signals. * If we need to reschedule or deliver a signal, clean up * and return without going into the guest(s). + * If the hpte_setup_done flag has been cleared, don't go into the + * guest because that means a HPT resize operation is in progress. */ local_irq_disable(); hard_irq_disable(); if (lazy_irq_pending() || need_resched() || - recheck_signals(&core_info)) { + recheck_signals(&core_info) || + (!kvm_is_radix(vc->kvm) && !vc->kvm->arch.hpte_setup_done)) { local_irq_enable(); vc->vcore_state = VCORE_INACTIVE; /* Unlock all except the primary vcore */ @@ -3061,7 +3064,7 @@ static void kvmppc_vcore_blocked(struct kvmppc_vcore *vc) static int kvmppc_run_vcpu(struct kvm_run *kvm_run, struct kvm_vcpu *vcpu) { - int n_ceded, i; + int n_ceded, i, r; struct kvmppc_vcore *vc; struct kvm_vcpu *v; @@ -3115,6 +3118,20 @@ static int kvmppc_run_vcpu(struct kvm_run *kvm_run, struct kvm_vcpu *vcpu) while (vcpu->arch.state == KVMPPC_VCPU_RUNNABLE && !signal_pending(current)) { + /* See if the HPT and VRMA are ready to go */ + if (!kvm_is_radix(vcpu->kvm) && + !vcpu->kvm->arch.hpte_setup_done) { + spin_unlock(&vc->lock); + r = kvmppc_hv_setup_htab_rma(vcpu); + spin_lock(&vc->lock); + if (r) { + kvm_run->exit_reason = KVM_EXIT_FAIL_ENTRY; + kvm_run->fail_entry.hardware_entry_failure_reason = 0; + vcpu->arch.ret = r; + break; + } + } + if (vc->vcore_state == VCORE_PREEMPT && vc->runner == NULL) kvmppc_vcore_end_preempt(vc); @@ -3232,13 +3249,6 @@ static int kvmppc_vcpu_run_hv(struct kvm_run *run, struct kvm_vcpu *vcpu) /* Order vcpus_running vs. hpte_setup_done, see kvmppc_alloc_reset_hpt */ smp_mb(); - /* On the first time here, set up HTAB and VRMA */ - if (!kvm_is_radix(vcpu->kvm) && !vcpu->kvm->arch.hpte_setup_done) { - r = kvmppc_hv_setup_htab_rma(vcpu); - if (r) - goto out; - } - flush_all_to_thread(current); /* Save userspace EBB and other register values */ @@ -3286,7 +3296,6 @@ static int kvmppc_vcpu_run_hv(struct kvm_run *run, struct kvm_vcpu *vcpu) } mtspr(SPRN_VRSAVE, user_vrsave); - out: vcpu->arch.state = KVMPPC_VCPU_NOTREADY; atomic_dec(&vcpu->kvm->arch.vcpus_running); return r; diff --git a/arch/x86/crypto/sha1-mb/sha1_mb_mgr_flush_avx2.S b/arch/x86/crypto/sha1-mb/sha1_mb_mgr_flush_avx2.S index 93b945597ecf..7cfba738f104 100644 --- a/arch/x86/crypto/sha1-mb/sha1_mb_mgr_flush_avx2.S +++ b/arch/x86/crypto/sha1-mb/sha1_mb_mgr_flush_avx2.S @@ -157,8 +157,8 @@ LABEL skip_ %I .endr # Find min length - vmovdqa _lens+0*16(state), %xmm0 - vmovdqa _lens+1*16(state), %xmm1 + vmovdqu _lens+0*16(state), %xmm0 + vmovdqu _lens+1*16(state), %xmm1 vpminud %xmm1, %xmm0, %xmm2 # xmm2 has {D,C,B,A} vpalignr $8, %xmm2, %xmm3, %xmm3 # xmm3 has {x,x,D,C} @@ -178,8 +178,8 @@ LABEL skip_ %I vpsubd %xmm2, %xmm0, %xmm0 vpsubd %xmm2, %xmm1, %xmm1 - vmovdqa %xmm0, _lens+0*16(state) - vmovdqa %xmm1, _lens+1*16(state) + vmovdqu %xmm0, _lens+0*16(state) + vmovdqu %xmm1, _lens+1*16(state) # "state" and "args" are the same address, arg1 # len is arg2 @@ -235,8 +235,8 @@ ENTRY(sha1_mb_mgr_get_comp_job_avx2) jc .return_null # Find min length - vmovdqa _lens(state), %xmm0 - vmovdqa _lens+1*16(state), %xmm1 + vmovdqu _lens(state), %xmm0 + vmovdqu _lens+1*16(state), %xmm1 vpminud %xmm1, %xmm0, %xmm2 # xmm2 has {D,C,B,A} vpalignr $8, %xmm2, %xmm3, %xmm3 # xmm3 has {x,x,D,C} diff --git a/arch/x86/crypto/sha256-mb/sha256_mb_mgr_flush_avx2.S b/arch/x86/crypto/sha256-mb/sha256_mb_mgr_flush_avx2.S index 8fe6338bcc84..16c4ccb1f154 100644 --- a/arch/x86/crypto/sha256-mb/sha256_mb_mgr_flush_avx2.S +++ b/arch/x86/crypto/sha256-mb/sha256_mb_mgr_flush_avx2.S @@ -155,8 +155,8 @@ LABEL skip_ %I .endr # Find min length - vmovdqa _lens+0*16(state), %xmm0 - vmovdqa _lens+1*16(state), %xmm1 + vmovdqu _lens+0*16(state), %xmm0 + vmovdqu _lens+1*16(state), %xmm1 vpminud %xmm1, %xmm0, %xmm2 # xmm2 has {D,C,B,A} vpalignr $8, %xmm2, %xmm3, %xmm3 # xmm3 has {x,x,D,C} @@ -176,8 +176,8 @@ LABEL skip_ %I vpsubd %xmm2, %xmm0, %xmm0 vpsubd %xmm2, %xmm1, %xmm1 - vmovdqa %xmm0, _lens+0*16(state) - vmovdqa %xmm1, _lens+1*16(state) + vmovdqu %xmm0, _lens+0*16(state) + vmovdqu %xmm1, _lens+1*16(state) # "state" and "args" are the same address, arg1 # len is arg2 @@ -234,8 +234,8 @@ ENTRY(sha256_mb_mgr_get_comp_job_avx2) jc .return_null # Find min length - vmovdqa _lens(state), %xmm0 - vmovdqa _lens+1*16(state), %xmm1 + vmovdqu _lens(state), %xmm0 + vmovdqu _lens+1*16(state), %xmm1 vpminud %xmm1, %xmm0, %xmm2 # xmm2 has {D,C,B,A} vpalignr $8, %xmm2, %xmm3, %xmm3 # xmm3 has {x,x,D,C} diff --git a/arch/x86/kernel/cpu/Makefile b/arch/x86/kernel/cpu/Makefile index 836877e2da22..cdf82492b770 100644 --- a/arch/x86/kernel/cpu/Makefile +++ b/arch/x86/kernel/cpu/Makefile @@ -21,7 +21,7 @@ obj-y += common.o obj-y += rdrand.o obj-y += match.o obj-y += bugs.o -obj-y += aperfmperf.o +obj-$(CONFIG_CPU_FREQ) += aperfmperf.o obj-$(CONFIG_PROC_FS) += proc.o obj-$(CONFIG_X86_FEATURE_NAMES) += capflags.o powerflags.o diff --git a/arch/x86/kernel/cpu/aperfmperf.c b/arch/x86/kernel/cpu/aperfmperf.c index 957813e0180d..0ee83321a313 100644 --- a/arch/x86/kernel/cpu/aperfmperf.c +++ b/arch/x86/kernel/cpu/aperfmperf.c @@ -42,6 +42,10 @@ static void aperfmperf_snapshot_khz(void *dummy) s64 time_delta = ktime_ms_delta(now, s->time); unsigned long flags; + /* Don't bother re-computing within the cache threshold time. */ + if (time_delta < APERFMPERF_CACHE_THRESHOLD_MS) + return; + local_irq_save(flags); rdmsrl(MSR_IA32_APERF, aperf); rdmsrl(MSR_IA32_MPERF, mperf); @@ -70,7 +74,6 @@ static void aperfmperf_snapshot_khz(void *dummy) unsigned int arch_freq_get_on_cpu(int cpu) { - s64 time_delta; unsigned int khz; if (!cpu_khz) @@ -79,12 +82,6 @@ unsigned int arch_freq_get_on_cpu(int cpu) if (!static_cpu_has(X86_FEATURE_APERFMPERF)) return 0; - /* Don't bother re-computing within the cache threshold time. */ - time_delta = ktime_ms_delta(ktime_get(), per_cpu(samples.time, cpu)); - khz = per_cpu(samples.khz, cpu); - if (khz && time_delta < APERFMPERF_CACHE_THRESHOLD_MS) - return khz; - smp_call_function_single(cpu, aperfmperf_snapshot_khz, NULL, 1); khz = per_cpu(samples.khz, cpu); if (khz) diff --git a/arch/x86/kernel/cpu/proc.c b/arch/x86/kernel/cpu/proc.c index 510e69596278..6df621ae62a7 100644 --- a/arch/x86/kernel/cpu/proc.c +++ b/arch/x86/kernel/cpu/proc.c @@ -77,10 +77,8 @@ static int show_cpuinfo(struct seq_file *m, void *v) seq_printf(m, "microcode\t: 0x%x\n", c->microcode); if (cpu_has(c, X86_FEATURE_TSC)) { - unsigned int freq = arch_freq_get_on_cpu(cpu); + unsigned int freq = cpufreq_quick_get(cpu); - if (!freq) - freq = cpufreq_quick_get(cpu); if (!freq) freq = cpu_khz; seq_printf(m, "cpu MHz\t\t: %u.%03u\n", diff --git a/arch/x86/kernel/smpboot.c b/arch/x86/kernel/smpboot.c index 54b9e89d4d6b..893fd8c849e2 100644 --- a/arch/x86/kernel/smpboot.c +++ b/arch/x86/kernel/smpboot.c @@ -193,6 +193,12 @@ static void smp_callin(void) */ smp_store_cpu_info(cpuid); + /* + * The topology information must be up to date before + * calibrate_delay() and notify_cpu_starting(). + */ + set_cpu_sibling_map(raw_smp_processor_id()); + /* * Get our bogomips. * Update loops_per_jiffy in cpu_data. Previous call to @@ -203,11 +209,6 @@ static void smp_callin(void) cpu_data(cpuid).loops_per_jiffy = loops_per_jiffy; pr_debug("Stack at about %p\n", &cpuid); - /* - * This must be done before setting cpu_online_mask - * or calling notify_cpu_starting. - */ - set_cpu_sibling_map(raw_smp_processor_id()); wmb(); notify_cpu_starting(cpuid); diff --git a/arch/x86/kernel/traps.c b/arch/x86/kernel/traps.c index bf54309b85da..b2157d4a5338 100644 --- a/arch/x86/kernel/traps.c +++ b/arch/x86/kernel/traps.c @@ -221,9 +221,6 @@ do_trap_no_signal(struct task_struct *tsk, int trapnr, char *str, if (fixup_exception(regs, trapnr)) return 0; - if (fixup_bug(regs, trapnr)) - return 0; - tsk->thread.error_code = error_code; tsk->thread.trap_nr = trapnr; die(str, regs, error_code); @@ -304,6 +301,13 @@ static void do_error_trap(struct pt_regs *regs, long error_code, char *str, RCU_LOCKDEP_WARN(!rcu_is_watching(), "entry code didn't wake RCU"); + /* + * WARN*()s end up here; fix them up before we call the + * notifier chain. + */ + if (!user_mode(regs) && fixup_bug(regs, trapnr)) + return; + if (notify_die(DIE_TRAP, str, regs, error_code, trapnr, signr) != NOTIFY_STOP) { cond_local_irq_enable(regs); diff --git a/arch/x86/kernel/tsc.c b/arch/x86/kernel/tsc.c index 796d96bb0821..ad2b925a808e 100644 --- a/arch/x86/kernel/tsc.c +++ b/arch/x86/kernel/tsc.c @@ -1346,12 +1346,10 @@ void __init tsc_init(void) unsigned long calibrate_delay_is_known(void) { int sibling, cpu = smp_processor_id(); - struct cpumask *mask = topology_core_cpumask(cpu); + int constant_tsc = cpu_has(&cpu_data(cpu), X86_FEATURE_CONSTANT_TSC); + const struct cpumask *mask = topology_core_cpumask(cpu); - if (!tsc_disabled && !cpu_has(&cpu_data(cpu), X86_FEATURE_CONSTANT_TSC)) - return 0; - - if (!mask) + if (tsc_disabled || !constant_tsc || !mask) return 0; sibling = cpumask_any_but(mask, cpu); diff --git a/arch/x86/oprofile/op_model_ppro.c b/arch/x86/oprofile/op_model_ppro.c index 350f7096baac..7913b6921959 100644 --- a/arch/x86/oprofile/op_model_ppro.c +++ b/arch/x86/oprofile/op_model_ppro.c @@ -212,8 +212,8 @@ static void arch_perfmon_setup_counters(void) eax.full = cpuid_eax(0xa); /* Workaround for BIOS bugs in 6/15. Taken from perfmon2 */ - if (eax.split.version_id == 0 && __this_cpu_read(cpu_info.x86) == 6 && - __this_cpu_read(cpu_info.x86_model) == 15) { + if (eax.split.version_id == 0 && boot_cpu_data.x86 == 6 && + boot_cpu_data.x86_model == 15) { eax.split.version_id = 2; eax.split.num_counters = 2; eax.split.bit_width = 40; diff --git a/crypto/ccm.c b/crypto/ccm.c index 1ce37ae0ce56..0a083342ec8c 100644 --- a/crypto/ccm.c +++ b/crypto/ccm.c @@ -363,7 +363,7 @@ static int crypto_ccm_decrypt(struct aead_request *req) unsigned int cryptlen = req->cryptlen; u8 *authtag = pctx->auth_tag; u8 *odata = pctx->odata; - u8 *iv = req->iv; + u8 *iv = pctx->idata; int err; cryptlen -= authsize; @@ -379,6 +379,8 @@ static int crypto_ccm_decrypt(struct aead_request *req) if (req->src != req->dst) dst = pctx->dst; + memcpy(iv, req->iv, 16); + skcipher_request_set_tfm(skreq, ctx->ctr); skcipher_request_set_callback(skreq, pctx->flags, crypto_ccm_decrypt_done, req); diff --git a/drivers/acpi/acpica/evgpeblk.c b/drivers/acpi/acpica/evgpeblk.c index 9c941947a063..3a3cb8624f41 100644 --- a/drivers/acpi/acpica/evgpeblk.c +++ b/drivers/acpi/acpica/evgpeblk.c @@ -440,9 +440,11 @@ acpi_ev_initialize_gpe_block(struct acpi_gpe_xrupt_info *gpe_xrupt_info, void *ignored) { acpi_status status; + acpi_event_status event_status; struct acpi_gpe_event_info *gpe_event_info; u32 gpe_enabled_count; u32 gpe_index; + u32 gpe_number; u32 i; u32 j; @@ -470,30 +472,40 @@ acpi_ev_initialize_gpe_block(struct acpi_gpe_xrupt_info *gpe_xrupt_info, gpe_index = (i * ACPI_GPE_REGISTER_WIDTH) + j; gpe_event_info = &gpe_block->event_info[gpe_index]; + gpe_number = gpe_block->block_base_number + gpe_index; /* * Ignore GPEs that have no corresponding _Lxx/_Exx method - * and GPEs that are used to wake the system + * and GPEs that are used for wakeup */ - if ((ACPI_GPE_DISPATCH_TYPE(gpe_event_info->flags) == - ACPI_GPE_DISPATCH_NONE) - || (ACPI_GPE_DISPATCH_TYPE(gpe_event_info->flags) == - ACPI_GPE_DISPATCH_HANDLER) - || (ACPI_GPE_DISPATCH_TYPE(gpe_event_info->flags) == - ACPI_GPE_DISPATCH_RAW_HANDLER) + if ((ACPI_GPE_DISPATCH_TYPE(gpe_event_info->flags) != + ACPI_GPE_DISPATCH_METHOD) || (gpe_event_info->flags & ACPI_GPE_CAN_WAKE)) { continue; } + event_status = 0; + (void)acpi_hw_get_gpe_status(gpe_event_info, + &event_status); + status = acpi_ev_add_gpe_reference(gpe_event_info); if (ACPI_FAILURE(status)) { ACPI_EXCEPTION((AE_INFO, status, "Could not enable GPE 0x%02X", - gpe_index + - gpe_block->block_base_number)); + gpe_number)); continue; } + gpe_event_info->flags |= ACPI_GPE_AUTO_ENABLED; + + if (event_status & ACPI_EVENT_FLAG_STATUS_SET) { + ACPI_INFO(("GPE 0x%02X active on init", + gpe_number)); + (void)acpi_ev_gpe_dispatch(gpe_block->node, + gpe_event_info, + gpe_number); + } + gpe_enabled_count++; } } diff --git a/drivers/acpi/acpica/evxfgpe.c b/drivers/acpi/acpica/evxfgpe.c index 57718a3e029a..67c7c4ce276c 100644 --- a/drivers/acpi/acpica/evxfgpe.c +++ b/drivers/acpi/acpica/evxfgpe.c @@ -435,6 +435,14 @@ acpi_setup_gpe_for_wake(acpi_handle wake_device, */ gpe_event_info->flags = (ACPI_GPE_DISPATCH_NOTIFY | ACPI_GPE_LEVEL_TRIGGERED); + } else if (gpe_event_info->flags & ACPI_GPE_AUTO_ENABLED) { + /* + * A reference to this GPE has been added during the GPE block + * initialization, so drop it now to prevent the GPE from being + * permanently enabled and clear its ACPI_GPE_AUTO_ENABLED flag. + */ + (void)acpi_ev_remove_gpe_reference(gpe_event_info); + gpe_event_info->flags &= ~ACPI_GPE_AUTO_ENABLED; } /* diff --git a/drivers/acpi/scan.c b/drivers/acpi/scan.c index 70fd5502c284..b7bdf9d0f5c0 100644 --- a/drivers/acpi/scan.c +++ b/drivers/acpi/scan.c @@ -2058,6 +2058,9 @@ int __init acpi_scan_init(void) acpi_get_spcr_uart_addr(); } + acpi_gpe_apply_masked_gpes(); + acpi_update_all_gpes(); + mutex_lock(&acpi_scan_lock); /* * Enumerate devices in the ACPI namespace. @@ -2082,9 +2085,6 @@ int __init acpi_scan_init(void) } } - acpi_gpe_apply_masked_gpes(); - acpi_update_all_gpes(); - acpi_scan_initialized = true; out: diff --git a/drivers/acpi/sleep.c b/drivers/acpi/sleep.c index fa8243c5c062..59b78e42a58b 100644 --- a/drivers/acpi/sleep.c +++ b/drivers/acpi/sleep.c @@ -160,6 +160,14 @@ static int __init init_nvs_nosave(const struct dmi_system_id *d) return 0; } +static bool acpi_sleep_no_lps0; + +static int __init init_no_lps0(const struct dmi_system_id *d) +{ + acpi_sleep_no_lps0 = true; + return 0; +} + static struct dmi_system_id acpisleep_dmi_table[] __initdata = { { .callback = init_old_suspend_ordering, @@ -343,6 +351,19 @@ static struct dmi_system_id acpisleep_dmi_table[] __initdata = { DMI_MATCH(DMI_PRODUCT_NAME, "80E3"), }, }, + /* + * https://bugzilla.kernel.org/show_bug.cgi?id=196907 + * Some Dell XPS13 9360 cannot do suspend-to-idle using the Low Power + * S0 Idle firmware interface. + */ + { + .callback = init_no_lps0, + .ident = "Dell XPS13 9360", + .matches = { + DMI_MATCH(DMI_SYS_VENDOR, "Dell Inc."), + DMI_MATCH(DMI_PRODUCT_NAME, "XPS 13 9360"), + }, + }, {}, }; @@ -485,6 +506,7 @@ static void acpi_pm_end(void) } #else /* !CONFIG_ACPI_SLEEP */ #define acpi_target_sleep_state ACPI_STATE_S0 +#define acpi_sleep_no_lps0 (false) static inline void acpi_sleep_dmi_check(void) {} #endif /* CONFIG_ACPI_SLEEP */ @@ -702,6 +724,12 @@ static int lps0_device_attach(struct acpi_device *adev, if (lps0_device_handle) return 0; + if (acpi_sleep_no_lps0) { + acpi_handle_info(adev->handle, + "Low Power S0 Idle interface disabled\n"); + return 0; + } + if (!(acpi_gbl_FADT.flags & ACPI_FADT_LOW_POWER_S0)) return 0; diff --git a/drivers/block/rbd.c b/drivers/block/rbd.c index b008b6a98098..cf54a1cf8c55 100644 --- a/drivers/block/rbd.c +++ b/drivers/block/rbd.c @@ -2692,7 +2692,7 @@ static int rbd_img_obj_parent_read_full(struct rbd_obj_request *obj_request) * from the parent. */ page_count = (u32)calc_pages_for(0, length); - pages = ceph_alloc_page_vector(page_count, GFP_KERNEL); + pages = ceph_alloc_page_vector(page_count, GFP_NOIO); if (IS_ERR(pages)) { result = PTR_ERR(pages); pages = NULL; @@ -2827,7 +2827,7 @@ static int rbd_img_obj_exists_submit(struct rbd_obj_request *obj_request) */ size = sizeof (__le64) + sizeof (__le32) + sizeof (__le32); page_count = (u32)calc_pages_for(0, size); - pages = ceph_alloc_page_vector(page_count, GFP_KERNEL); + pages = ceph_alloc_page_vector(page_count, GFP_NOIO); if (IS_ERR(pages)) { ret = PTR_ERR(pages); goto fail_stat_request; diff --git a/drivers/gpu/drm/vmwgfx/vmwgfx_drv.c b/drivers/gpu/drm/vmwgfx/vmwgfx_drv.c index 4436d53ae16c..f160a66b7098 100644 --- a/drivers/gpu/drm/vmwgfx/vmwgfx_drv.c +++ b/drivers/gpu/drm/vmwgfx/vmwgfx_drv.c @@ -722,7 +722,7 @@ static int vmw_driver_load(struct drm_device *dev, unsigned long chipset) * allocation taken by fbdev */ if (!(dev_priv->capabilities & SVGA_CAP_3D)) - mem_size *= 2; + mem_size *= 3; dev_priv->max_mob_pages = mem_size * 1024 / PAGE_SIZE; dev_priv->prim_bb_mem = diff --git a/drivers/input/mouse/elan_i2c_core.c b/drivers/input/mouse/elan_i2c_core.c index a6b762271a40..47a9696e7874 100644 --- a/drivers/input/mouse/elan_i2c_core.c +++ b/drivers/input/mouse/elan_i2c_core.c @@ -1253,6 +1253,7 @@ static const struct acpi_device_id elan_acpi_id[] = { { "ELAN0605", 0 }, { "ELAN0609", 0 }, { "ELAN060B", 0 }, + { "ELAN060C", 0 }, { "ELAN0611", 0 }, { "ELAN1000", 0 }, { } diff --git a/drivers/net/can/c_can/c_can_pci.c b/drivers/net/can/c_can/c_can_pci.c index cf7c18947189..d065c0e2d18e 100644 --- a/drivers/net/can/c_can/c_can_pci.c +++ b/drivers/net/can/c_can/c_can_pci.c @@ -178,7 +178,6 @@ static int c_can_pci_probe(struct pci_dev *pdev, break; case BOSCH_D_CAN: priv->regs = reg_map_d_can; - priv->can.ctrlmode_supported |= CAN_CTRLMODE_3_SAMPLES; break; default: ret = -EINVAL; diff --git a/drivers/net/can/c_can/c_can_platform.c b/drivers/net/can/c_can/c_can_platform.c index e36d10520e24..717530eac70c 100644 --- a/drivers/net/can/c_can/c_can_platform.c +++ b/drivers/net/can/c_can/c_can_platform.c @@ -320,7 +320,6 @@ static int c_can_plat_probe(struct platform_device *pdev) break; case BOSCH_D_CAN: priv->regs = reg_map_d_can; - priv->can.ctrlmode_supported |= CAN_CTRLMODE_3_SAMPLES; priv->read_reg = c_can_plat_read_reg_aligned_to_16bit; priv->write_reg = c_can_plat_write_reg_aligned_to_16bit; priv->read_reg32 = d_can_plat_read_reg32; diff --git a/drivers/net/can/ifi_canfd/ifi_canfd.c b/drivers/net/can/ifi_canfd/ifi_canfd.c index 4d1fe8d95042..2772d05ff11c 100644 --- a/drivers/net/can/ifi_canfd/ifi_canfd.c +++ b/drivers/net/can/ifi_canfd/ifi_canfd.c @@ -670,9 +670,9 @@ static void ifi_canfd_set_bittiming(struct net_device *ndev) priv->base + IFI_CANFD_FTIME); /* Configure transmitter delay */ - tdc = (dbt->brp * (dbt->phase_seg1 + 1)) & IFI_CANFD_TDELAY_MASK; - writel(IFI_CANFD_TDELAY_EN | IFI_CANFD_TDELAY_ABS | tdc, - priv->base + IFI_CANFD_TDELAY); + tdc = dbt->brp * (dbt->prop_seg + dbt->phase_seg1); + tdc &= IFI_CANFD_TDELAY_MASK; + writel(IFI_CANFD_TDELAY_EN | tdc, priv->base + IFI_CANFD_TDELAY); } static void ifi_canfd_set_filter(struct net_device *ndev, const u32 id, diff --git a/drivers/net/can/peak_canfd/peak_pciefd_main.c b/drivers/net/can/peak_canfd/peak_pciefd_main.c index 51c2d182a33a..b4efd711f824 100644 --- a/drivers/net/can/peak_canfd/peak_pciefd_main.c +++ b/drivers/net/can/peak_canfd/peak_pciefd_main.c @@ -29,14 +29,19 @@ #include "peak_canfd_user.h" MODULE_AUTHOR("Stephane Grosjean <s.grosjean(a)peak-system.com>"); -MODULE_DESCRIPTION("Socket-CAN driver for PEAK PCAN PCIe FD family cards"); -MODULE_SUPPORTED_DEVICE("PEAK PCAN PCIe FD CAN cards"); +MODULE_DESCRIPTION("Socket-CAN driver for PEAK PCAN PCIe/M.2 FD family cards"); +MODULE_SUPPORTED_DEVICE("PEAK PCAN PCIe/M.2 FD CAN cards"); MODULE_LICENSE("GPL v2"); #define PCIEFD_DRV_NAME "peak_pciefd" #define PEAK_PCI_VENDOR_ID 0x001c /* The PCI device and vendor IDs */ #define PEAK_PCIEFD_ID 0x0013 /* for PCIe slot cards */ +#define PCAN_CPCIEFD_ID 0x0014 /* for Compact-PCI Serial slot cards */ +#define PCAN_PCIE104FD_ID 0x0017 /* for PCIe-104 Express slot cards */ +#define PCAN_MINIPCIEFD_ID 0x0018 /* for mini-PCIe slot cards */ +#define PCAN_PCIEFD_OEM_ID 0x0019 /* for PCIe slot OEM cards */ +#define PCAN_M2_ID 0x001a /* for M2 slot cards */ /* PEAK PCIe board access description */ #define PCIEFD_BAR0_SIZE (64 * 1024) @@ -203,6 +208,11 @@ struct pciefd_board { /* supported device ids. */ static const struct pci_device_id peak_pciefd_tbl[] = { {PEAK_PCI_VENDOR_ID, PEAK_PCIEFD_ID, PCI_ANY_ID, PCI_ANY_ID,}, + {PEAK_PCI_VENDOR_ID, PCAN_CPCIEFD_ID, PCI_ANY_ID, PCI_ANY_ID,}, + {PEAK_PCI_VENDOR_ID, PCAN_PCIE104FD_ID, PCI_ANY_ID, PCI_ANY_ID,}, + {PEAK_PCI_VENDOR_ID, PCAN_MINIPCIEFD_ID, PCI_ANY_ID, PCI_ANY_ID,}, + {PEAK_PCI_VENDOR_ID, PCAN_PCIEFD_OEM_ID, PCI_ANY_ID, PCI_ANY_ID,}, + {PEAK_PCI_VENDOR_ID, PCAN_M2_ID, PCI_ANY_ID, PCI_ANY_ID,}, {0,} }; diff --git a/drivers/net/can/sun4i_can.c b/drivers/net/can/sun4i_can.c index b0c80859f746..1ac2090a1721 100644 --- a/drivers/net/can/sun4i_can.c +++ b/drivers/net/can/sun4i_can.c @@ -539,6 +539,13 @@ static int sun4i_can_err(struct net_device *dev, u8 isrc, u8 status) } stats->rx_over_errors++; stats->rx_errors++; + + /* reset the CAN IP by entering reset mode + * ignoring timeout error + */ + set_reset_mode(dev); + set_normal_mode(dev); + /* clear bit */ sun4i_can_write_cmdreg(priv, SUN4I_CMD_CLEAR_OR_FLAG); } @@ -653,8 +660,9 @@ static irqreturn_t sun4i_can_interrupt(int irq, void *dev_id) netif_wake_queue(dev); can_led_event(dev, CAN_LED_EVENT_TX); } - if (isrc & SUN4I_INT_RBUF_VLD) { - /* receive interrupt */ + if ((isrc & SUN4I_INT_RBUF_VLD) && + !(isrc & SUN4I_INT_DATA_OR)) { + /* receive interrupt - don't read if overrun occurred */ while (status & SUN4I_STA_RBUF_RDY) { /* RX buffer is not empty */ sun4i_can_rx(dev); diff --git a/include/acpi/actypes.h b/include/acpi/actypes.h index 2fcbaec8b368..71eddf645566 100644 --- a/include/acpi/actypes.h +++ b/include/acpi/actypes.h @@ -775,7 +775,7 @@ typedef u32 acpi_event_status; * | | | | +-- Type of dispatch:to method, handler, notify, or none * | | | +----- Interrupt type: edge or level triggered * | | +------- Is a Wake GPE - * | +--------- Is GPE masked by the software GPE masking mechanism + * | +--------- Has been enabled automatically at init time * +------------ <Reserved> */ #define ACPI_GPE_DISPATCH_NONE (u8) 0x00 @@ -791,6 +791,7 @@ typedef u32 acpi_event_status; #define ACPI_GPE_XRUPT_TYPE_MASK (u8) 0x08 #define ACPI_GPE_CAN_WAKE (u8) 0x10 +#define ACPI_GPE_AUTO_ENABLED (u8) 0x20 /* * Flags for GPE and Lock interfaces diff --git a/include/net/netfilter/nf_conntrack.h b/include/net/netfilter/nf_conntrack.h index 48407569585d..a7c2cee39570 100644 --- a/include/net/netfilter/nf_conntrack.h +++ b/include/net/netfilter/nf_conntrack.h @@ -17,7 +17,6 @@ #include <linux/bitops.h> #include <linux/compiler.h> #include <linux/atomic.h> -#include <linux/rhashtable.h> #include <linux/netfilter/nf_conntrack_tcp.h> #include <linux/netfilter/nf_conntrack_dccp.h> @@ -83,7 +82,7 @@ struct nf_conn { possible_net_t ct_net; #if IS_ENABLED(CONFIG_NF_NAT) - struct rhlist_head nat_bysource; + struct hlist_node nat_bysource; #endif /* all members below initialized via memset */ u8 __nfct_init_offset[0]; diff --git a/include/net/netfilter/nf_nat.h b/include/net/netfilter/nf_nat.h index 05c82a1a4267..b71701302e61 100644 --- a/include/net/netfilter/nf_nat.h +++ b/include/net/netfilter/nf_nat.h @@ -1,6 +1,5 @@ #ifndef _NF_NAT_H #define _NF_NAT_H -#include <linux/rhashtable.h> #include <linux/netfilter_ipv4.h> #include <linux/netfilter/nf_nat.h> #include <net/netfilter/nf_conntrack_tuple.h> diff --git a/include/sound/seq_kernel.h b/include/sound/seq_kernel.h index feb58d455560..4b9ee3009aa0 100644 --- a/include/sound/seq_kernel.h +++ b/include/sound/seq_kernel.h @@ -49,7 +49,8 @@ typedef union snd_seq_timestamp snd_seq_timestamp_t; #define SNDRV_SEQ_DEFAULT_CLIENT_EVENTS 200 /* max delivery path length */ -#define SNDRV_SEQ_MAX_HOPS 10 +/* NOTE: this shouldn't be greater than MAX_LOCKDEP_SUBCLASSES */ +#define SNDRV_SEQ_MAX_HOPS 8 /* max size of event size */ #define SNDRV_SEQ_MAX_EVENT_LEN 0x3fffffff diff --git a/include/sound/timer.h b/include/sound/timer.h index c4d76ff056c6..7ae226ab6990 100644 --- a/include/sound/timer.h +++ b/include/sound/timer.h @@ -90,6 +90,8 @@ struct snd_timer { struct list_head ack_list_head; struct list_head sack_list_head; /* slow ack list head */ struct tasklet_struct task_queue; + int max_instances; /* upper limit of timer instances */ + int num_instances; /* current number of timer instances */ }; struct snd_timer_instance { diff --git a/kernel/workqueue_internal.h b/kernel/workqueue_internal.h index 8635417c587b..29fa81f0f51a 100644 --- a/kernel/workqueue_internal.h +++ b/kernel/workqueue_internal.h @@ -9,6 +9,7 @@ #include <linux/workqueue.h> #include <linux/kthread.h> +#include <linux/preempt.h> struct worker_pool; @@ -59,7 +60,7 @@ struct worker { */ static inline struct worker *current_wq_worker(void) { - if (current->flags & PF_WQ_WORKER) + if (in_task() && (current->flags & PF_WQ_WORKER)) return kthread_data(current); return NULL; } diff --git a/lib/asn1_decoder.c b/lib/asn1_decoder.c index fef5d2e114be..1ef0cec38d78 100644 --- a/lib/asn1_decoder.c +++ b/lib/asn1_decoder.c @@ -228,7 +228,7 @@ int asn1_ber_decoder(const struct asn1_decoder *decoder, hdr = 2; /* Extract a tag from the data */ - if (unlikely(dp >= datalen - 1)) + if (unlikely(datalen - dp < 2)) goto data_overrun_error; tag = data[dp++]; if (unlikely((tag & 0x1f) == ASN1_LONG_TAG)) @@ -274,7 +274,7 @@ int asn1_ber_decoder(const struct asn1_decoder *decoder, int n = len - 0x80; if (unlikely(n > 2)) goto length_too_long; - if (unlikely(dp >= datalen - n)) + if (unlikely(n > datalen - dp)) goto data_overrun_error; hdr += n; for (len = 0; n > 0; n--) { diff --git a/net/netfilter/nf_nat_core.c b/net/netfilter/nf_nat_core.c index b1d3740ae36a..2fb80a4bfb34 100644 --- a/net/netfilter/nf_nat_core.c +++ b/net/netfilter/nf_nat_core.c @@ -30,19 +30,17 @@ #include <net/netfilter/nf_conntrack_zones.h> #include <linux/netfilter/nf_nat.h> +static DEFINE_SPINLOCK(nf_nat_lock); + static DEFINE_MUTEX(nf_nat_proto_mutex); static const struct nf_nat_l3proto __rcu *nf_nat_l3protos[NFPROTO_NUMPROTO] __read_mostly; static const struct nf_nat_l4proto __rcu **nf_nat_l4protos[NFPROTO_NUMPROTO] __read_mostly; -struct nf_nat_conn_key { - const struct net *net; - const struct nf_conntrack_tuple *tuple; - const struct nf_conntrack_zone *zone; -}; - -static struct rhltable nf_nat_bysource_table; +static struct hlist_head *nf_nat_bysource __read_mostly; +static unsigned int nf_nat_htable_size __read_mostly; +static unsigned int nf_nat_hash_rnd __read_mostly; inline const struct nf_nat_l3proto * __nf_nat_l3proto_find(u8 family) @@ -118,17 +116,19 @@ int nf_xfrm_me_harder(struct net *net, struct sk_buff *skb, unsigned int family) EXPORT_SYMBOL(nf_xfrm_me_harder); #endif /* CONFIG_XFRM */ -static u32 nf_nat_bysource_hash(const void *data, u32 len, u32 seed) +/* We keep an extra hash for each conntrack, for fast searching. */ +static unsigned int +hash_by_src(const struct net *n, const struct nf_conntrack_tuple *tuple) { - const struct nf_conntrack_tuple *t; - const struct nf_conn *ct = data; + unsigned int hash; + + get_random_once(&nf_nat_hash_rnd, sizeof(nf_nat_hash_rnd)); - t = &ct->tuplehash[IP_CT_DIR_ORIGINAL].tuple; /* Original src, to ensure we map it consistently if poss. */ + hash = jhash2((u32 *)&tuple->src, sizeof(tuple->src) / sizeof(u32), + tuple->dst.protonum ^ nf_nat_hash_rnd ^ net_hash_mix(n)); - seed ^= net_hash_mix(nf_ct_net(ct)); - return jhash2((const u32 *)&t->src, sizeof(t->src) / sizeof(u32), - t->dst.protonum ^ seed); + return reciprocal_scale(hash, nf_nat_htable_size); } /* Is this tuple already taken? (not by us) */ @@ -184,28 +184,6 @@ same_src(const struct nf_conn *ct, t->src.u.all == tuple->src.u.all); } -static int nf_nat_bysource_cmp(struct rhashtable_compare_arg *arg, - const void *obj) -{ - const struct nf_nat_conn_key *key = arg->key; - const struct nf_conn *ct = obj; - - if (!same_src(ct, key->tuple) || - !net_eq(nf_ct_net(ct), key->net) || - !nf_ct_zone_equal(ct, key->zone, IP_CT_DIR_ORIGINAL)) - return 1; - - return 0; -} - -static struct rhashtable_params nf_nat_bysource_params = { - .head_offset = offsetof(struct nf_conn, nat_bysource), - .obj_hashfn = nf_nat_bysource_hash, - .obj_cmpfn = nf_nat_bysource_cmp, - .nelem_hint = 256, - .min_size = 1024, -}; - /* Only called for SRC manip */ static int find_appropriate_src(struct net *net, @@ -216,26 +194,22 @@ find_appropriate_src(struct net *net, struct nf_conntrack_tuple *result, const struct nf_nat_range *range) { + unsigned int h = hash_by_src(net, tuple); const struct nf_conn *ct; - struct nf_nat_conn_key key = { - .net = net, - .tuple = tuple, - .zone = zone - }; - struct rhlist_head *hl, *h; - - hl = rhltable_lookup(&nf_nat_bysource_table, &key, - nf_nat_bysource_params); - rhl_for_each_entry_rcu(ct, h, hl, nat_bysource) { - nf_ct_invert_tuplepr(result, - &ct->tuplehash[IP_CT_DIR_REPLY].tuple); - result->dst = tuple->dst; - - if (in_range(l3proto, l4proto, result, range)) - return 1; + hlist_for_each_entry_rcu(ct, &nf_nat_bysource[h], nat_bysource) { + if (same_src(ct, tuple) && + net_eq(net, nf_ct_net(ct)) && + nf_ct_zone_equal(ct, zone, IP_CT_DIR_ORIGINAL)) { + /* Copy source part from reply tuple. */ + nf_ct_invert_tuplepr(result, + &ct->tuplehash[IP_CT_DIR_REPLY].tuple); + result->dst = tuple->dst; + + if (in_range(l3proto, l4proto, result, range)) + return 1; + } } - return 0; } @@ -408,6 +382,7 @@ nf_nat_setup_info(struct nf_conn *ct, const struct nf_nat_range *range, enum nf_nat_manip_type maniptype) { + struct net *net = nf_ct_net(ct); struct nf_conntrack_tuple curr_tuple, new_tuple; /* Can't setup nat info for confirmed ct. */ @@ -447,19 +422,14 @@ nf_nat_setup_info(struct nf_conn *ct, } if (maniptype == NF_NAT_MANIP_SRC) { - struct nf_nat_conn_key key = { - .net = nf_ct_net(ct), - .tuple = &ct->tuplehash[IP_CT_DIR_ORIGINAL].tuple, - .zone = nf_ct_zone(ct), - }; - int err; - - err = rhltable_insert_key(&nf_nat_bysource_table, - &key, - &ct->nat_bysource, - nf_nat_bysource_params); - if (err) - return NF_DROP; + unsigned int srchash; + + srchash = hash_by_src(net, + &ct->tuplehash[IP_CT_DIR_ORIGINAL].tuple); + spin_lock_bh(&nf_nat_lock); + hlist_add_head_rcu(&ct->nat_bysource, + &nf_nat_bysource[srchash]); + spin_unlock_bh(&nf_nat_lock); } /* It's done. */ @@ -568,8 +538,9 @@ static int nf_nat_proto_clean(struct nf_conn *ct, void *data) * will delete entry from already-freed table. */ clear_bit(IPS_SRC_NAT_DONE_BIT, &ct->status); - rhltable_remove(&nf_nat_bysource_table, &ct->nat_bysource, - nf_nat_bysource_params); + spin_lock_bh(&nf_nat_lock); + hlist_del_rcu(&ct->nat_bysource); + spin_unlock_bh(&nf_nat_lock); /* don't delete conntrack. Although that would make things a lot * simpler, we'd end up flushing all conntracks on nat rmmod. @@ -697,9 +668,11 @@ EXPORT_SYMBOL_GPL(nf_nat_l3proto_unregister); /* No one using conntrack by the time this called. */ static void nf_nat_cleanup_conntrack(struct nf_conn *ct) { - if (ct->status & IPS_SRC_NAT_DONE) - rhltable_remove(&nf_nat_bysource_table, &ct->nat_bysource, - nf_nat_bysource_params); + if (ct->status & IPS_SRC_NAT_DONE) { + spin_lock_bh(&nf_nat_lock); + hlist_del_rcu(&ct->nat_bysource); + spin_unlock_bh(&nf_nat_lock); + } } static struct nf_ct_ext_type nat_extend __read_mostly = { @@ -823,13 +796,16 @@ static int __init nf_nat_init(void) { int ret; - ret = rhltable_init(&nf_nat_bysource_table, &nf_nat_bysource_params); - if (ret) - return ret; + /* Leave them the same for the moment. */ + nf_nat_htable_size = nf_conntrack_htable_size; + + nf_nat_bysource = nf_ct_alloc_hashtable(&nf_nat_htable_size, 0); + if (!nf_nat_bysource) + return -ENOMEM; ret = nf_ct_extend_register(&nat_extend); if (ret < 0) { - rhltable_destroy(&nf_nat_bysource_table); + nf_ct_free_hashtable(nf_nat_bysource, nf_nat_htable_size); printk(KERN_ERR "nf_nat_core: Unable to register extension\n"); return ret; } @@ -863,8 +839,8 @@ static void __exit nf_nat_cleanup(void) for (i = 0; i < NFPROTO_NUMPROTO; i++) kfree(nf_nat_l4protos[i]); - - rhltable_destroy(&nf_nat_bysource_table); + synchronize_net(); + nf_ct_free_hashtable(nf_nat_bysource, nf_nat_htable_size); } MODULE_LICENSE("GPL"); diff --git a/net/netfilter/nft_set_hash.c b/net/netfilter/nft_set_hash.c index 0fa01d772c5e..9c0d5a7ce5f9 100644 --- a/net/netfilter/nft_set_hash.c +++ b/net/netfilter/nft_set_hash.c @@ -643,7 +643,6 @@ nft_hash_select_ops(const struct nft_ctx *ctx, const struct nft_set_desc *desc, { if (desc->size) { switch (desc->klen) { - case 2: case 4: return &nft_hash_fast_ops; default: diff --git a/sound/core/hrtimer.c b/sound/core/hrtimer.c index 1ac0c423903e..6e47b823bcaa 100644 --- a/sound/core/hrtimer.c +++ b/sound/core/hrtimer.c @@ -159,6 +159,7 @@ static int __init snd_hrtimer_init(void) timer->hw = hrtimer_hw; timer->hw.resolution = resolution; timer->hw.ticks = NANO_SEC / resolution; + timer->max_instances = 100; /* lower the limit */ err = snd_timer_global_register(timer); if (err < 0) { diff --git a/sound/core/seq/oss/seq_oss_midi.c b/sound/core/seq/oss/seq_oss_midi.c index aaff9ee32695..b30b2139e3f0 100644 --- a/sound/core/seq/oss/seq_oss_midi.c +++ b/sound/core/seq/oss/seq_oss_midi.c @@ -612,9 +612,7 @@ send_midi_event(struct seq_oss_devinfo *dp, struct snd_seq_event *ev, struct seq if (!dp->timer->running) len = snd_seq_oss_timer_start(dp->timer); if (ev->type == SNDRV_SEQ_EVENT_SYSEX) { - if ((ev->flags & SNDRV_SEQ_EVENT_LENGTH_MASK) == SNDRV_SEQ_EVENT_LENGTH_VARIABLE) - snd_seq_oss_readq_puts(dp->readq, mdev->seq_device, - ev->data.ext.ptr, ev->data.ext.len); + snd_seq_oss_readq_sysex(dp->readq, mdev->seq_device, ev); } else { len = snd_midi_event_decode(mdev->coder, msg, sizeof(msg), ev); if (len > 0) diff --git a/sound/core/seq/oss/seq_oss_readq.c b/sound/core/seq/oss/seq_oss_readq.c index 046cb586fb2f..06b21226b4e7 100644 --- a/sound/core/seq/oss/seq_oss_readq.c +++ b/sound/core/seq/oss/seq_oss_readq.c @@ -117,6 +117,35 @@ snd_seq_oss_readq_puts(struct seq_oss_readq *q, int dev, unsigned char *data, in return 0; } +/* + * put MIDI sysex bytes; the event buffer may be chained, thus it has + * to be expanded via snd_seq_dump_var_event(). + */ +struct readq_sysex_ctx { + struct seq_oss_readq *readq; + int dev; +}; + +static int readq_dump_sysex(void *ptr, void *buf, int count) +{ + struct readq_sysex_ctx *ctx = ptr; + + return snd_seq_oss_readq_puts(ctx->readq, ctx->dev, buf, count); +} + +int snd_seq_oss_readq_sysex(struct seq_oss_readq *q, int dev, + struct snd_seq_event *ev) +{ + struct readq_sysex_ctx ctx = { + .readq = q, + .dev = dev + }; + + if ((ev->flags & SNDRV_SEQ_EVENT_LENGTH_MASK) != SNDRV_SEQ_EVENT_LENGTH_VARIABLE) + return 0; + return snd_seq_dump_var_event(ev, readq_dump_sysex, &ctx); +} + /* * copy an event to input queue: * return zero if enqueued diff --git a/sound/core/seq/oss/seq_oss_readq.h b/sound/core/seq/oss/seq_oss_readq.h index f1463f1f449e..8d033ca2d23f 100644 --- a/sound/core/seq/oss/seq_oss_readq.h +++ b/sound/core/seq/oss/seq_oss_readq.h @@ -44,6 +44,8 @@ void snd_seq_oss_readq_delete(struct seq_oss_readq *q); void snd_seq_oss_readq_clear(struct seq_oss_readq *readq); unsigned int snd_seq_oss_readq_poll(struct seq_oss_readq *readq, struct file *file, poll_table *wait); int snd_seq_oss_readq_puts(struct seq_oss_readq *readq, int dev, unsigned char *data, int len); +int snd_seq_oss_readq_sysex(struct seq_oss_readq *q, int dev, + struct snd_seq_event *ev); int snd_seq_oss_readq_put_event(struct seq_oss_readq *readq, union evrec *ev); int snd_seq_oss_readq_put_timestamp(struct seq_oss_readq *readq, unsigned long curt, int seq_mode); int snd_seq_oss_readq_pick(struct seq_oss_readq *q, union evrec *rec); diff --git a/sound/core/timer.c b/sound/core/timer.c index a9b9a277e00c..c8e4d0da13b4 100644 --- a/sound/core/timer.c +++ b/sound/core/timer.c @@ -180,7 +180,7 @@ static void snd_timer_request(struct snd_timer_id *tid) * * call this with register_mutex down. */ -static void snd_timer_check_slave(struct snd_timer_instance *slave) +static int snd_timer_check_slave(struct snd_timer_instance *slave) { struct snd_timer *timer; struct snd_timer_instance *master; @@ -190,16 +190,21 @@ static void snd_timer_check_slave(struct snd_timer_instance *slave) list_for_each_entry(master, &timer->open_list_head, open_list) { if (slave->slave_class == master->slave_class && slave->slave_id == master->slave_id) { + if (master->timer->num_instances >= + master->timer->max_instances) + return -EBUSY; list_move_tail(&slave->open_list, &master->slave_list_head); + master->timer->num_instances++; spin_lock_irq(&slave_active_lock); slave->master = master; slave->timer = master->timer; spin_unlock_irq(&slave_active_lock); - return; + return 0; } } } + return 0; } /* @@ -208,7 +213,7 @@ static void snd_timer_check_slave(struct snd_timer_instance *slave) * * call this with register_mutex down. */ -static void snd_timer_check_master(struct snd_timer_instance *master) +static int snd_timer_check_master(struct snd_timer_instance *master) { struct snd_timer_instance *slave, *tmp; @@ -216,7 +221,11 @@ static void snd_timer_check_master(struct snd_timer_instance *master) list_for_each_entry_safe(slave, tmp, &snd_timer_slave_list, open_list) { if (slave->slave_class == master->slave_class && slave->slave_id == master->slave_id) { + if (master->timer->num_instances >= + master->timer->max_instances) + return -EBUSY; list_move_tail(&slave->open_list, &master->slave_list_head); + master->timer->num_instances++; spin_lock_irq(&slave_active_lock); spin_lock(&master->timer->lock); slave->master = master; @@ -228,8 +237,11 @@ static void snd_timer_check_master(struct snd_timer_instance *master) spin_unlock_irq(&slave_active_lock); } } + return 0; } +static int snd_timer_close_locked(struct snd_timer_instance *timeri); + /* * open a timer instance * when opening a master, the slave id must be here given. @@ -240,6 +252,7 @@ int snd_timer_open(struct snd_timer_instance **ti, { struct snd_timer *timer; struct snd_timer_instance *timeri = NULL; + int err; if (tid->dev_class == SNDRV_TIMER_CLASS_SLAVE) { /* open a slave instance */ @@ -259,10 +272,14 @@ int snd_timer_open(struct snd_timer_instance **ti, timeri->slave_id = tid->device; timeri->flags |= SNDRV_TIMER_IFLG_SLAVE; list_add_tail(&timeri->open_list, &snd_timer_slave_list); - snd_timer_check_slave(timeri); + err = snd_timer_check_slave(timeri); + if (err < 0) { + snd_timer_close_locked(timeri); + timeri = NULL; + } mutex_unlock(&register_mutex); *ti = timeri; - return 0; + return err; } /* open a master instance */ @@ -288,6 +305,10 @@ int snd_timer_open(struct snd_timer_instance **ti, return -EBUSY; } } + if (timer->num_instances >= timer->max_instances) { + mutex_unlock(&register_mutex); + return -EBUSY; + } timeri = snd_timer_instance_new(owner, timer); if (!timeri) { mutex_unlock(&register_mutex); @@ -314,25 +335,27 @@ int snd_timer_open(struct snd_timer_instance **ti, } list_add_tail(&timeri->open_list, &timer->open_list_head); - snd_timer_check_master(timeri); + timer->num_instances++; + err = snd_timer_check_master(timeri); + if (err < 0) { + snd_timer_close_locked(timeri); + timeri = NULL; + } mutex_unlock(&register_mutex); *ti = timeri; - return 0; + return err; } EXPORT_SYMBOL(snd_timer_open); /* * close a timer instance + * call this with register_mutex down. */ -int snd_timer_close(struct snd_timer_instance *timeri) +static int snd_timer_close_locked(struct snd_timer_instance *timeri) { struct snd_timer *timer = NULL; struct snd_timer_instance *slave, *tmp; - if (snd_BUG_ON(!timeri)) - return -ENXIO; - - mutex_lock(&register_mutex); list_del(&timeri->open_list); /* force to stop the timer */ @@ -340,6 +363,7 @@ int snd_timer_close(struct snd_timer_instance *timeri) timer = timeri->timer; if (timer) { + timer->num_instances--; /* wait, until the active callback is finished */ spin_lock_irq(&timer->lock); while (timeri->flags & SNDRV_TIMER_IFLG_CALLBACK) { @@ -355,6 +379,7 @@ int snd_timer_close(struct snd_timer_instance *timeri) list_for_each_entry_safe(slave, tmp, &timeri->slave_list_head, open_list) { list_move_tail(&slave->open_list, &snd_timer_slave_list); + timer->num_instances--; slave->master = NULL; slave->timer = NULL; list_del_init(&slave->ack_list); @@ -382,9 +407,24 @@ int snd_timer_close(struct snd_timer_instance *timeri) module_put(timer->module); } - mutex_unlock(&register_mutex); return 0; } + +/* + * close a timer instance + */ +int snd_timer_close(struct snd_timer_instance *timeri) +{ + int err; + + if (snd_BUG_ON(!timeri)) + return -ENXIO; + + mutex_lock(&register_mutex); + err = snd_timer_close_locked(timeri); + mutex_unlock(&register_mutex); + return err; +} EXPORT_SYMBOL(snd_timer_close); unsigned long snd_timer_resolution(struct snd_timer_instance *timeri) @@ -855,6 +895,7 @@ int snd_timer_new(struct snd_card *card, char *id, struct snd_timer_id *tid, spin_lock_init(&timer->lock); tasklet_init(&timer->task_queue, snd_timer_tasklet, (unsigned long)timer); + timer->max_instances = 1000; /* default limit per timer */ if (card != NULL) { timer->module = card->module; err = snd_device_new(card, SNDRV_DEV_TIMER, timer, &ops); diff --git a/sound/pci/hda/patch_realtek.c b/sound/pci/hda/patch_realtek.c index fe4d06398fc3..c5f0e8d42d22 100644 --- a/sound/pci/hda/patch_realtek.c +++ b/sound/pci/hda/patch_realtek.c @@ -6527,6 +6527,11 @@ static const struct snd_hda_pin_quirk alc269_pin_fixup_tbl[] = { {0x14, 0x90170110}, {0x1b, 0x90a70130}, {0x21, 0x03211020}), + SND_HDA_PIN_QUIRK(0x10ec0274, 0x1028, "Dell", ALC269_FIXUP_DELL1_MIC_NO_PRESENCE, + {0x12, 0xb7a60130}, + {0x13, 0xb8a61140}, + {0x16, 0x90170110}, + {0x21, 0x04211020}), SND_HDA_PIN_QUIRK(0x10ec0280, 0x103c, "HP", ALC280_FIXUP_HP_GPIO4, {0x12, 0x90a60130}, {0x14, 0x90170110}, diff --git a/sound/usb/quirks.c b/sound/usb/quirks.c index 0e54fe490458..f910c4fd932b 100644 --- a/sound/usb/quirks.c +++ b/sound/usb/quirks.c @@ -1373,6 +1373,7 @@ u64 snd_usb_interface_dsd_format_quirks(struct snd_usb_audio *chip, case 0x199: return SNDRV_PCM_FMTBIT_DSD_U32_LE; case 0x19b: + case 0x203: return SNDRV_PCM_FMTBIT_DSD_U32_BE; default: break;

7 years, 11 months

1
0
0 0

Re: [Linux-stable-mirror] Linux 3.18.81

by Greg KH

diff --git a/Documentation/devicetree/bindings/arm/davinci.txt b/Documentation/devicetree/bindings/arm/davinci.txt index cfaeda4274e6..e6f4b50da1f9 100644 --- a/Documentation/devicetree/bindings/arm/davinci.txt +++ b/Documentation/devicetree/bindings/arm/davinci.txt @@ -9,6 +9,10 @@ EnBW AM1808 based CMC board Required root node properties: - compatible = "enbw,cmc", "ti,da850; +LEGO MINDSTORMS EV3 (AM1808 based) +Required root node properties: + - compatible = "lego,ev3", "ti,da850"; + Generic DaVinci Boards ---------------------- diff --git a/Documentation/devicetree/bindings/vendor-prefixes.txt b/Documentation/devicetree/bindings/vendor-prefixes.txt index a344ec2713a5..356ffd64fc9e 100644 --- a/Documentation/devicetree/bindings/vendor-prefixes.txt +++ b/Documentation/devicetree/bindings/vendor-prefixes.txt @@ -83,6 +83,7 @@ karo Ka-Ro electronics GmbH keymile Keymile GmbH lacie LaCie lantiq Lantiq Semiconductor +lego LEGO Systems A/S lenovo Lenovo Group Ltd. lg LG Corporation linux Linux-specific binding diff --git a/Makefile b/Makefile index 8feea3dadc60..5e66a3704705 100644 --- a/Makefile +++ b/Makefile @@ -1,6 +1,6 @@ VERSION = 3 PATCHLEVEL = 18 -SUBLEVEL = 80 +SUBLEVEL = 81 EXTRAVERSION = NAME = Diseased Newt diff --git a/arch/arm/boot/dts/imx53-qsb-common.dtsi b/arch/arm/boot/dts/imx53-qsb-common.dtsi index 1f55187ed9ce..53e81589368a 100644 --- a/arch/arm/boot/dts/imx53-qsb-common.dtsi +++ b/arch/arm/boot/dts/imx53-qsb-common.dtsi @@ -215,16 +215,16 @@ pinctrl_fec: fecgrp { fsl,pins = < - MX53_PAD_FEC_MDC__FEC_MDC 0x80000000 - MX53_PAD_FEC_MDIO__FEC_MDIO 0x80000000 - MX53_PAD_FEC_REF_CLK__FEC_TX_CLK 0x80000000 - MX53_PAD_FEC_RX_ER__FEC_RX_ER 0x80000000 - MX53_PAD_FEC_CRS_DV__FEC_RX_DV 0x80000000 - MX53_PAD_FEC_RXD1__FEC_RDATA_1 0x80000000 - MX53_PAD_FEC_RXD0__FEC_RDATA_0 0x80000000 - MX53_PAD_FEC_TX_EN__FEC_TX_EN 0x80000000 - MX53_PAD_FEC_TXD1__FEC_TDATA_1 0x80000000 - MX53_PAD_FEC_TXD0__FEC_TDATA_0 0x80000000 + MX53_PAD_FEC_MDC__FEC_MDC 0x4 + MX53_PAD_FEC_MDIO__FEC_MDIO 0x1fc + MX53_PAD_FEC_REF_CLK__FEC_TX_CLK 0x180 + MX53_PAD_FEC_RX_ER__FEC_RX_ER 0x180 + MX53_PAD_FEC_CRS_DV__FEC_RX_DV 0x180 + MX53_PAD_FEC_RXD1__FEC_RDATA_1 0x180 + MX53_PAD_FEC_RXD0__FEC_RDATA_0 0x180 + MX53_PAD_FEC_TX_EN__FEC_TX_EN 0x4 + MX53_PAD_FEC_TXD1__FEC_TDATA_1 0x4 + MX53_PAD_FEC_TXD0__FEC_TDATA_0 0x4 >; }; diff --git a/arch/arm/configs/omap2plus_defconfig b/arch/arm/configs/omap2plus_defconfig index a0e51bb68b2d..85128b297ec1 100644 --- a/arch/arm/configs/omap2plus_defconfig +++ b/arch/arm/configs/omap2plus_defconfig @@ -169,6 +169,7 @@ CONFIG_INPUT_TWL4030_PWRBUTTON=y CONFIG_SERIAL_8250=y CONFIG_SERIAL_8250_CONSOLE=y CONFIG_SERIAL_8250_NR_UARTS=32 +CONFIG_SERIAL_8250_RUNTIME_UARTS=6 CONFIG_SERIAL_8250_EXTENDED=y CONFIG_SERIAL_8250_MANY_PORTS=y CONFIG_SERIAL_8250_SHARE_IRQ=y diff --git a/arch/arm/kernel/traps.c b/arch/arm/kernel/traps.c index 9f5d81881eb6..8db4c231a285 100644 --- a/arch/arm/kernel/traps.c +++ b/arch/arm/kernel/traps.c @@ -132,30 +132,26 @@ static void dump_mem(const char *lvl, const char *str, unsigned long bottom, set_fs(fs); } -static void dump_instr(const char *lvl, struct pt_regs *regs) +static void __dump_instr(const char *lvl, struct pt_regs *regs) { unsigned long addr = instruction_pointer(regs); const int thumb = thumb_mode(regs); const int width = thumb ? 4 : 8; - mm_segment_t fs; char str[sizeof("00000000 ") * 5 + 2 + 1], *p = str; int i; /* - * We need to switch to kernel mode so that we can use __get_user - * to safely read from kernel space. Note that we now dump the - * code first, just in case the backtrace kills us. + * Note that we now dump the code first, just in case the backtrace + * kills us. */ - fs = get_fs(); - set_fs(KERNEL_DS); for (i = -4; i < 1 + !!thumb; i++) { unsigned int val, bad; if (thumb) - bad = __get_user(val, &((u16 *)addr)[i]); + bad = get_user(val, &((u16 *)addr)[i]); else - bad = __get_user(val, &((u32 *)addr)[i]); + bad = get_user(val, &((u32 *)addr)[i]); if (!bad) p += sprintf(p, i == 0 ? "(%0*x) " : "%0*x ", @@ -166,8 +162,20 @@ static void dump_instr(const char *lvl, struct pt_regs *regs) } } printk("%sCode: %s\n", lvl, str); +} - set_fs(fs); +static void dump_instr(const char *lvl, struct pt_regs *regs) +{ + mm_segment_t fs; + + if (!user_mode(regs)) { + fs = get_fs(); + set_fs(KERNEL_DS); + __dump_instr(lvl, regs); + set_fs(fs); + } else { + __dump_instr(lvl, regs); + } } #ifdef CONFIG_ARM_UNWIND diff --git a/arch/mips/ar7/platform.c b/arch/mips/ar7/platform.c index 7e2356fd5fd6..e4f47d3e55bb 100644 --- a/arch/mips/ar7/platform.c +++ b/arch/mips/ar7/platform.c @@ -581,6 +581,7 @@ static int __init ar7_register_uarts(void) uart_port.type = PORT_AR7; uart_port.uartclk = clk_get_rate(bus_clk) / 2; uart_port.iotype = UPIO_MEM32; + uart_port.flags = UPF_FIXED_TYPE; uart_port.regshift = 2; uart_port.line = 0; diff --git a/arch/mips/include/asm/mips-cm.h b/arch/mips/include/asm/mips-cm.h index 6a9d2dd005ca..79c882be9d17 100644 --- a/arch/mips/include/asm/mips-cm.h +++ b/arch/mips/include/asm/mips-cm.h @@ -173,8 +173,8 @@ BUILD_CM_Cx_R_(tcid_8_priority, 0x80) #define CM_GCR_BASE_GCRBASE_MSK (_ULCAST_(0x1ffff) << 15) #define CM_GCR_BASE_CMDEFTGT_SHF 0 #define CM_GCR_BASE_CMDEFTGT_MSK (_ULCAST_(0x3) << 0) -#define CM_GCR_BASE_CMDEFTGT_DISABLED 0 -#define CM_GCR_BASE_CMDEFTGT_MEM 1 +#define CM_GCR_BASE_CMDEFTGT_MEM 0 +#define CM_GCR_BASE_CMDEFTGT_RESERVED 1 #define CM_GCR_BASE_CMDEFTGT_IOCU0 2 #define CM_GCR_BASE_CMDEFTGT_IOCU1 3 diff --git a/arch/mips/mm/uasm-micromips.c b/arch/mips/mm/uasm-micromips.c index 8399ddf03a02..cab124e0572d 100644 --- a/arch/mips/mm/uasm-micromips.c +++ b/arch/mips/mm/uasm-micromips.c @@ -83,7 +83,7 @@ static struct insn insn_table_MM[] = { { insn_jr, M(mm_pool32a_op, 0, 0, 0, mm_jalr_op, mm_pool32axf_op), RS }, { insn_lb, M(mm_lb32_op, 0, 0, 0, 0, 0), RT | RS | SIMM }, { insn_ld, 0, 0 }, - { insn_lh, M(mm_lh32_op, 0, 0, 0, 0, 0), RS | RS | SIMM }, + { insn_lh, M(mm_lh32_op, 0, 0, 0, 0, 0), RT | RS | SIMM }, { insn_ll, M(mm_pool32c_op, 0, 0, (mm_ll_func << 1), 0, 0), RS | RT | SIMM }, { insn_lld, 0, 0 }, { insn_lui, M(mm_pool32i_op, mm_lui_op, 0, 0, 0, 0), RS | SIMM }, diff --git a/arch/sh/kernel/cpu/sh3/setup-sh770x.c b/arch/sh/kernel/cpu/sh3/setup-sh770x.c index 538c10db3537..8dc315b212c2 100644 --- a/arch/sh/kernel/cpu/sh3/setup-sh770x.c +++ b/arch/sh/kernel/cpu/sh3/setup-sh770x.c @@ -165,7 +165,6 @@ static struct plat_sci_port scif2_platform_data = { .scscr = SCSCR_TE | SCSCR_RE, .type = PORT_IRDA, .ops = &sh770x_sci_port_ops, - .regshift = 1, }; static struct resource scif2_resources[] = { diff --git a/arch/x86/crypto/sha-mb/sha1_mb_mgr_flush_avx2.S b/arch/x86/crypto/sha-mb/sha1_mb_mgr_flush_avx2.S index 85c4e1cf7172..e1693457c178 100644 --- a/arch/x86/crypto/sha-mb/sha1_mb_mgr_flush_avx2.S +++ b/arch/x86/crypto/sha-mb/sha1_mb_mgr_flush_avx2.S @@ -174,8 +174,8 @@ LABEL skip_ %I .endr # Find min length - vmovdqa _lens+0*16(state), %xmm0 - vmovdqa _lens+1*16(state), %xmm1 + vmovdqu _lens+0*16(state), %xmm0 + vmovdqu _lens+1*16(state), %xmm1 vpminud %xmm1, %xmm0, %xmm2 # xmm2 has {D,C,B,A} vpalignr $8, %xmm2, %xmm3, %xmm3 # xmm3 has {x,x,D,C} @@ -195,8 +195,8 @@ LABEL skip_ %I vpsubd %xmm2, %xmm0, %xmm0 vpsubd %xmm2, %xmm1, %xmm1 - vmovdqa %xmm0, _lens+0*16(state) - vmovdqa %xmm1, _lens+1*16(state) + vmovdqu %xmm0, _lens+0*16(state) + vmovdqu %xmm1, _lens+1*16(state) # "state" and "args" are the same address, arg1 # len is arg2 @@ -260,8 +260,8 @@ ENTRY(sha1_mb_mgr_get_comp_job_avx2) jc .return_null # Find min length - vmovdqa _lens(state), %xmm0 - vmovdqa _lens+1*16(state), %xmm1 + vmovdqu _lens(state), %xmm0 + vmovdqu _lens+1*16(state), %xmm1 vpminud %xmm1, %xmm0, %xmm2 # xmm2 has {D,C,B,A} vpalignr $8, %xmm2, %xmm3, %xmm3 # xmm3 has {x,x,D,C} diff --git a/arch/x86/oprofile/op_model_ppro.c b/arch/x86/oprofile/op_model_ppro.c index d90528ea5412..12c051d19e4b 100644 --- a/arch/x86/oprofile/op_model_ppro.c +++ b/arch/x86/oprofile/op_model_ppro.c @@ -212,8 +212,8 @@ static void arch_perfmon_setup_counters(void) eax.full = cpuid_eax(0xa); /* Workaround for BIOS bugs in 6/15. Taken from perfmon2 */ - if (eax.split.version_id == 0 && __this_cpu_read(cpu_info.x86) == 6 && - __this_cpu_read(cpu_info.x86_model) == 15) { + if (eax.split.version_id == 0 && boot_cpu_data.x86 == 6 && + boot_cpu_data.x86_model == 15) { eax.split.version_id = 2; eax.split.num_counters = 2; eax.split.bit_width = 40; diff --git a/drivers/block/rbd.c b/drivers/block/rbd.c index 2f7358726737..9e97f3415b36 100644 --- a/drivers/block/rbd.c +++ b/drivers/block/rbd.c @@ -2700,7 +2700,7 @@ static int rbd_img_obj_parent_read_full(struct rbd_obj_request *obj_request) * from the parent. */ page_count = (u32)calc_pages_for(0, length); - pages = ceph_alloc_page_vector(page_count, GFP_KERNEL); + pages = ceph_alloc_page_vector(page_count, GFP_NOIO); if (IS_ERR(pages)) { result = PTR_ERR(pages); pages = NULL; @@ -2827,7 +2827,7 @@ static int rbd_img_obj_exists_submit(struct rbd_obj_request *obj_request) */ size = sizeof (__le64) + sizeof (__le32) + sizeof (__le32); page_count = (u32)calc_pages_for(0, size); - pages = ceph_alloc_page_vector(page_count, GFP_KERNEL); + pages = ceph_alloc_page_vector(page_count, GFP_NOIO); if (IS_ERR(pages)) return PTR_ERR(pages); diff --git a/drivers/gpu/drm/drm_drv.c b/drivers/gpu/drm/drm_drv.c index bc3da32d4585..72a71fa72653 100644 --- a/drivers/gpu/drm/drm_drv.c +++ b/drivers/gpu/drm/drm_drv.c @@ -320,7 +320,7 @@ static int drm_minor_register(struct drm_device *dev, unsigned int type) ret = drm_debugfs_init(minor, minor->index, drm_debugfs_root); if (ret) { DRM_ERROR("DRM: Failed to initialize /sys/kernel/debug/dri.\n"); - return ret; + goto err_debugfs; } ret = device_add(minor->kdev); diff --git a/drivers/iio/trigger/iio-trig-interrupt.c b/drivers/iio/trigger/iio-trig-interrupt.c index 572bc6f02ca8..e18f12b74610 100644 --- a/drivers/iio/trigger/iio-trig-interrupt.c +++ b/drivers/iio/trigger/iio-trig-interrupt.c @@ -58,7 +58,7 @@ static int iio_interrupt_trigger_probe(struct platform_device *pdev) trig_info = kzalloc(sizeof(*trig_info), GFP_KERNEL); if (!trig_info) { ret = -ENOMEM; - goto error_put_trigger; + goto error_free_trigger; } iio_trigger_set_drvdata(trig, trig_info); trig_info->irq = irq; @@ -83,8 +83,8 @@ error_release_irq: free_irq(irq, trig); error_free_trig_info: kfree(trig_info); -error_put_trigger: - iio_trigger_put(trig); +error_free_trigger: + iio_trigger_free(trig); error_ret: return ret; } @@ -99,7 +99,7 @@ static int iio_interrupt_trigger_remove(struct platform_device *pdev) iio_trigger_unregister(trig); free_irq(trig_info->irq, trig); kfree(trig_info); - iio_trigger_put(trig); + iio_trigger_free(trig); return 0; } diff --git a/drivers/iio/trigger/iio-trig-sysfs.c b/drivers/iio/trigger/iio-trig-sysfs.c index 254c7e906127..61ffbec048a7 100644 --- a/drivers/iio/trigger/iio-trig-sysfs.c +++ b/drivers/iio/trigger/iio-trig-sysfs.c @@ -173,7 +173,7 @@ static int iio_sysfs_trigger_probe(int id) return 0; out2: - iio_trigger_put(t->trig); + iio_trigger_free(t->trig); free_t: kfree(t); out1: diff --git a/drivers/infiniband/ulp/ipoib/ipoib_cm.c b/drivers/infiniband/ulp/ipoib/ipoib_cm.c index cdf0a78e0c99..d88f8dbe62d9 100644 --- a/drivers/infiniband/ulp/ipoib/ipoib_cm.c +++ b/drivers/infiniband/ulp/ipoib/ipoib_cm.c @@ -1362,7 +1362,7 @@ static void ipoib_cm_tx_reap(struct work_struct *work) while (!list_empty(&priv->cm.reap_list)) { p = list_entry(priv->cm.reap_list.next, typeof(*p), list); - list_del(&p->list); + list_del_init(&p->list); spin_unlock_irqrestore(&priv->lock, flags); netif_tx_unlock_bh(dev); ipoib_cm_tx_destroy(p); diff --git a/drivers/input/keyboard/mpr121_touchkey.c b/drivers/input/keyboard/mpr121_touchkey.c index 009c82256e89..671d202a94fa 100644 --- a/drivers/input/keyboard/mpr121_touchkey.c +++ b/drivers/input/keyboard/mpr121_touchkey.c @@ -87,7 +87,8 @@ static irqreturn_t mpr_touchkey_interrupt(int irq, void *dev_id) struct mpr121_touchkey *mpr121 = dev_id; struct i2c_client *client = mpr121->client; struct input_dev *input = mpr121->input_dev; - unsigned int key_num, key_val, pressed; + unsigned long bit_changed; + unsigned int key_num; int reg; reg = i2c_smbus_read_byte_data(client, ELE_TOUCH_STATUS_1_ADDR); @@ -105,18 +106,22 @@ static irqreturn_t mpr_touchkey_interrupt(int irq, void *dev_id) reg &= TOUCH_STATUS_MASK; /* use old press bit to figure out which bit changed */ - key_num = ffs(reg ^ mpr121->statusbits) - 1; - pressed = reg & (1 << key_num); + bit_changed = reg ^ mpr121->statusbits; mpr121->statusbits = reg; + for_each_set_bit(key_num, &bit_changed, mpr121->keycount) { + unsigned int key_val, pressed; - key_val = mpr121->keycodes[key_num]; + pressed = reg & BIT(key_num); + key_val = mpr121->keycodes[key_num]; - input_event(input, EV_MSC, MSC_SCAN, key_num); - input_report_key(input, key_val, pressed); - input_sync(input); + input_event(input, EV_MSC, MSC_SCAN, key_num); + input_report_key(input, key_val, pressed); + + dev_dbg(&client->dev, "key %d %d %s\n", key_num, key_val, + pressed ? "pressed" : "released"); - dev_dbg(&client->dev, "key %d %d %s\n", key_num, key_val, - pressed ? "pressed" : "released"); + } + input_sync(input); out: return IRQ_HANDLED; @@ -230,6 +235,7 @@ static int mpr_touchkey_probe(struct i2c_client *client, input_dev->id.bustype = BUS_I2C; input_dev->dev.parent = &client->dev; input_dev->evbit[0] = BIT_MASK(EV_KEY) | BIT_MASK(EV_REP); + input_set_capability(input_dev, EV_MSC, MSC_SCAN); input_dev->keycode = mpr121->keycodes; input_dev->keycodesize = sizeof(mpr121->keycodes[0]); diff --git a/drivers/net/can/c_can/c_can_pci.c b/drivers/net/can/c_can/c_can_pci.c index 7be393c96b1a..8d2724327f69 100644 --- a/drivers/net/can/c_can/c_can_pci.c +++ b/drivers/net/can/c_can/c_can_pci.c @@ -177,7 +177,6 @@ static int c_can_pci_probe(struct pci_dev *pdev, break; case BOSCH_D_CAN: priv->regs = reg_map_d_can; - priv->can.ctrlmode_supported |= CAN_CTRLMODE_3_SAMPLES; break; default: ret = -EINVAL; diff --git a/drivers/net/can/c_can/c_can_platform.c b/drivers/net/can/c_can/c_can_platform.c index fb279d6ae484..ef056a33604e 100644 --- a/drivers/net/can/c_can/c_can_platform.c +++ b/drivers/net/can/c_can/c_can_platform.c @@ -257,7 +257,6 @@ static int c_can_plat_probe(struct platform_device *pdev) break; case BOSCH_D_CAN: priv->regs = reg_map_d_can; - priv->can.ctrlmode_supported |= CAN_CTRLMODE_3_SAMPLES; priv->read_reg = c_can_plat_read_reg_aligned_to_16bit; priv->write_reg = c_can_plat_write_reg_aligned_to_16bit; priv->read_reg32 = d_can_plat_read_reg32; diff --git a/drivers/net/xen-netback/netback.c b/drivers/net/xen-netback/netback.c index 7a85ff54a39f..50b7731025c1 100644 --- a/drivers/net/xen-netback/netback.c +++ b/drivers/net/xen-netback/netback.c @@ -67,6 +67,7 @@ module_param(rx_drain_timeout_msecs, uint, 0444); unsigned int rx_stall_timeout_msecs = 60000; module_param(rx_stall_timeout_msecs, uint, 0444); +#define MAX_QUEUES_DEFAULT 8 unsigned int xenvif_max_queues; module_param_named(max_queues, xenvif_max_queues, uint, 0644); MODULE_PARM_DESC(max_queues, @@ -2189,11 +2190,12 @@ static int __init netback_init(void) if (!xen_domain()) return -ENODEV; - /* Allow as many queues as there are CPUs if user has not + /* Allow as many queues as there are CPUs but max. 8 if user has not * specified a value. */ if (xenvif_max_queues == 0) - xenvif_max_queues = num_online_cpus(); + xenvif_max_queues = min_t(unsigned int, MAX_QUEUES_DEFAULT, + num_online_cpus()); if (fatal_skb_slots < XEN_NETBK_LEGACY_SLOTS_MAX) { pr_info("fatal_skb_slots too small (%d), bump it to XEN_NETBK_LEGACY_SLOTS_MAX (%d)\n", diff --git a/drivers/staging/iio/trigger/iio-trig-bfin-timer.c b/drivers/staging/iio/trigger/iio-trig-bfin-timer.c index a21b7c514776..b412f567a9c1 100644 --- a/drivers/staging/iio/trigger/iio-trig-bfin-timer.c +++ b/drivers/staging/iio/trigger/iio-trig-bfin-timer.c @@ -258,7 +258,7 @@ out_free_irq: out1: iio_trigger_unregister(st->trig); out: - iio_trigger_put(st->trig); + iio_trigger_free(st->trig); return ret; } @@ -271,7 +271,7 @@ static int iio_bfin_tmr_trigger_remove(struct platform_device *pdev) peripheral_free(st->t->pin); free_irq(st->irq, st); iio_trigger_unregister(st->trig); - iio_trigger_put(st->trig); + iio_trigger_free(st->trig); return 0; } diff --git a/drivers/tty/serial/sh-sci.c b/drivers/tty/serial/sh-sci.c index f6c7f043c176..118d998f6ff6 100644 --- a/drivers/tty/serial/sh-sci.c +++ b/drivers/tty/serial/sh-sci.c @@ -171,18 +171,17 @@ static struct plat_sci_reg sci_regmap[SCIx_NR_REGTYPES][SCIx_NR_REGS] = { }, /* - * Common definitions for legacy IrDA ports, dependent on - * regshift value. + * Common definitions for legacy IrDA ports. */ [SCIx_IRDA_REGTYPE] = { [SCSMR] = { 0x00, 8 }, - [SCBRR] = { 0x01, 8 }, - [SCSCR] = { 0x02, 8 }, - [SCxTDR] = { 0x03, 8 }, - [SCxSR] = { 0x04, 8 }, - [SCxRDR] = { 0x05, 8 }, - [SCFCR] = { 0x06, 8 }, - [SCFDR] = { 0x07, 16 }, + [SCBRR] = { 0x02, 8 }, + [SCSCR] = { 0x04, 8 }, + [SCxTDR] = { 0x06, 8 }, + [SCxSR] = { 0x08, 16 }, + [SCxRDR] = { 0x0a, 8 }, + [SCFCR] = { 0x0c, 8 }, + [SCFDR] = { 0x0e, 16 }, [SCTFDR] = sci_reg_invalid, [SCRFDR] = sci_reg_invalid, [SCSPTR] = sci_reg_invalid, diff --git a/drivers/usb/core/hcd.c b/drivers/usb/core/hcd.c index 826b8fb9eb59..d7203fd67f2a 100644 --- a/drivers/usb/core/hcd.c +++ b/drivers/usb/core/hcd.c @@ -2927,6 +2927,7 @@ void usb_remove_hcd(struct usb_hcd *hcd) } usb_put_invalidate_rhdev(hcd); + hcd->flags = 0; } EXPORT_SYMBOL_GPL(usb_remove_hcd); diff --git a/drivers/video/fbdev/pmag-ba-fb.c b/drivers/video/fbdev/pmag-ba-fb.c index 914a52ba8477..77837665ce89 100644 --- a/drivers/video/fbdev/pmag-ba-fb.c +++ b/drivers/video/fbdev/pmag-ba-fb.c @@ -129,7 +129,7 @@ static struct fb_ops pmagbafb_ops = { /* * Turn the hardware cursor off. */ -static void __init pmagbafb_erase_cursor(struct fb_info *info) +static void pmagbafb_erase_cursor(struct fb_info *info) { struct pmagbafb_par *par = info->par; diff --git a/include/linux/phy.h b/include/linux/phy.h index fbdacd1278e3..bc79f855fc32 100644 --- a/include/linux/phy.h +++ b/include/linux/phy.h @@ -135,11 +135,7 @@ static inline const char *phy_modes(phy_interface_t interface) /* Used when trying to connect to a specific phy (mii bus id:phy device id) */ #define PHY_ID_FMT "%s:%02x" -/* - * Need to be a little smaller than phydev->dev.bus_id to leave room - * for the ":%02x" - */ -#define MII_BUS_ID_SIZE (20 - 3) +#define MII_BUS_ID_SIZE 61 /* Or MII_ADDR_C45 into regnum for read/write on mii_bus to enable the 21 bit IEEE 802.3ae clause 45 addressing mode used by 10GIGE phy chips. */ @@ -573,7 +569,7 @@ struct phy_driver { /* A Structure for boards to register fixups with the PHY Lib */ struct phy_fixup { struct list_head list; - char bus_id[20]; + char bus_id[MII_BUS_ID_SIZE + 3]; u32 phy_uid; u32 phy_uid_mask; int (*run)(struct phy_device *phydev); diff --git a/include/sound/seq_kernel.h b/include/sound/seq_kernel.h index 2398521f0998..d06bb8109cdc 100644 --- a/include/sound/seq_kernel.h +++ b/include/sound/seq_kernel.h @@ -55,7 +55,8 @@ typedef union snd_seq_timestamp snd_seq_timestamp_t; #define SNDRV_SEQ_DEFAULT_CLIENT_EVENTS 200 /* max delivery path length */ -#define SNDRV_SEQ_MAX_HOPS 10 +/* NOTE: this shouldn't be greater than MAX_LOCKDEP_SUBCLASSES */ +#define SNDRV_SEQ_MAX_HOPS 8 /* max size of event size */ #define SNDRV_SEQ_MAX_EVENT_LEN 0x3fffffff diff --git a/lib/asn1_decoder.c b/lib/asn1_decoder.c index 828ead6b78a8..162b6d290622 100644 --- a/lib/asn1_decoder.c +++ b/lib/asn1_decoder.c @@ -220,7 +220,7 @@ next_op: hdr = 2; /* Extract a tag from the data */ - if (unlikely(dp >= datalen - 1)) + if (unlikely(datalen - dp < 2)) goto data_overrun_error; tag = data[dp++]; if (unlikely((tag & 0x1f) == ASN1_LONG_TAG)) @@ -266,7 +266,7 @@ next_op: int n = len - 0x80; if (unlikely(n > 2)) goto length_too_long; - if (unlikely(dp >= datalen - n)) + if (unlikely(n > datalen - dp)) goto data_overrun_error; hdr += n; for (len = 0; n > 0; n--) { diff --git a/net/ipv4/ah4.c b/net/ipv4/ah4.c index ac9a32ec3ee4..0157f09c0de9 100644 --- a/net/ipv4/ah4.c +++ b/net/ipv4/ah4.c @@ -270,6 +270,9 @@ static void ah_input_done(struct crypto_async_request *base, int err) int ihl = ip_hdrlen(skb); int ah_hlen = (ah->hdrlen + 2) << 2; + if (err) + goto out; + work_iph = AH_SKB_CB(skb)->tmp; auth_data = ah_tmp_auth(work_iph, ihl); icv = ah_tmp_icv(ahp->ahash, auth_data, ahp->icv_trunc_len); diff --git a/security/keys/trusted.c b/security/keys/trusted.c index aeb38f1a12e7..1273e22aaa28 100644 --- a/security/keys/trusted.c +++ b/security/keys/trusted.c @@ -69,7 +69,7 @@ static int TSS_sha1(const unsigned char *data, unsigned int datalen, } ret = crypto_shash_digest(&sdesc->shash, data, datalen, digest); - kfree(sdesc); + kzfree(sdesc); return ret; } @@ -113,7 +113,7 @@ static int TSS_rawhmac(unsigned char *digest, const unsigned char *key, if (!ret) ret = crypto_shash_final(&sdesc->shash, digest); out: - kfree(sdesc); + kzfree(sdesc); return ret; } @@ -164,7 +164,7 @@ static int TSS_authhmac(unsigned char *digest, const unsigned char *key, paramdigest, TPM_NONCE_SIZE, h1, TPM_NONCE_SIZE, h2, 1, &c, 0, 0); out: - kfree(sdesc); + kzfree(sdesc); return ret; } @@ -245,7 +245,7 @@ static int TSS_checkhmac1(unsigned char *buffer, if (memcmp(testhmac, authdata, SHA1_DIGEST_SIZE)) ret = -EINVAL; out: - kfree(sdesc); + kzfree(sdesc); return ret; } @@ -346,7 +346,7 @@ static int TSS_checkhmac2(unsigned char *buffer, if (memcmp(testhmac2, authdata2, SHA1_DIGEST_SIZE)) ret = -EINVAL; out: - kfree(sdesc); + kzfree(sdesc); return ret; } @@ -563,7 +563,7 @@ static int tpm_seal(struct tpm_buf *tb, uint16_t keytype, *bloblen = storedsize; } out: - kfree(td); + kzfree(td); return ret; } @@ -677,7 +677,7 @@ static int key_seal(struct trusted_key_payload *p, if (ret < 0) pr_info("trusted_key: srkseal failed (%d)\n", ret); - kfree(tb); + kzfree(tb); return ret; } @@ -702,7 +702,7 @@ static int key_unseal(struct trusted_key_payload *p, /* pull migratable flag out of sealed key */ p->migratable = p->key[--p->key_len]; - kfree(tb); + kzfree(tb); return ret; } @@ -961,12 +961,12 @@ static int trusted_instantiate(struct key *key, if (!ret && options->pcrlock) ret = pcrlock(options->pcrlock); out: - kfree(datablob); - kfree(options); + kzfree(datablob); + kzfree(options); if (!ret) rcu_assign_keypointer(key, payload); else - kfree(payload); + kzfree(payload); return ret; } @@ -975,8 +975,7 @@ static void trusted_rcu_free(struct rcu_head *rcu) struct trusted_key_payload *p; p = container_of(rcu, struct trusted_key_payload, rcu); - memset(p->key, 0, p->key_len); - kfree(p); + kzfree(p); } /* @@ -1018,9 +1017,10 @@ static int trusted_update(struct key *key, struct key_preparsed_payload *prep) ret = datablob_parse(datablob, new_p, new_o); if (ret != Opt_update) { ret = -EINVAL; - kfree(new_p); + kzfree(new_p); goto out; } + /* copy old key values, and reseal with new pcrs */ new_p->migratable = p->migratable; new_p->key_len = p->key_len; @@ -1031,22 +1031,22 @@ static int trusted_update(struct key *key, struct key_preparsed_payload *prep) ret = key_seal(new_p, new_o); if (ret < 0) { pr_info("trusted_key: key_seal failed (%d)\n", ret); - kfree(new_p); + kzfree(new_p); goto out; } if (new_o->pcrlock) { ret = pcrlock(new_o->pcrlock); if (ret < 0) { pr_info("trusted_key: pcrlock failed (%d)\n", ret); - kfree(new_p); + kzfree(new_p); goto out; } } rcu_assign_keypointer(key, new_p); call_rcu(&p->rcu, trusted_rcu_free); out: - kfree(datablob); - kfree(new_o); + kzfree(datablob); + kzfree(new_o); return ret; } @@ -1065,34 +1065,30 @@ static long trusted_read(const struct key *key, char __user *buffer, p = rcu_dereference_key(key); if (!p) return -EINVAL; - if (!buffer || buflen <= 0) - return 2 * p->blob_len; - ascii_buf = kmalloc(2 * p->blob_len, GFP_KERNEL); - if (!ascii_buf) - return -ENOMEM; - bufp = ascii_buf; - for (i = 0; i < p->blob_len; i++) - bufp = hex_byte_pack(bufp, p->blob[i]); - if ((copy_to_user(buffer, ascii_buf, 2 * p->blob_len)) != 0) { - kfree(ascii_buf); - return -EFAULT; + if (buffer && buflen >= 2 * p->blob_len) { + ascii_buf = kmalloc(2 * p->blob_len, GFP_KERNEL); + if (!ascii_buf) + return -ENOMEM; + + bufp = ascii_buf; + for (i = 0; i < p->blob_len; i++) + bufp = hex_byte_pack(bufp, p->blob[i]); + if (copy_to_user(buffer, ascii_buf, 2 * p->blob_len) != 0) { + kzfree(ascii_buf); + return -EFAULT; + } + kzfree(ascii_buf); } - kfree(ascii_buf); return 2 * p->blob_len; } /* - * trusted_destroy - before freeing the key, clear the decrypted data + * trusted_destroy - clear and free the key's payload */ static void trusted_destroy(struct key *key) { - struct trusted_key_payload *p = key->payload.data; - - if (!p) - return; - memset(p->key, 0, p->key_len); - kfree(key->payload.data); + kzfree(key->payload.data); } struct key_type key_type_trusted = { diff --git a/sound/core/seq/oss/seq_oss_midi.c b/sound/core/seq/oss/seq_oss_midi.c index 3a4569669efa..86353dc0439c 100644 --- a/sound/core/seq/oss/seq_oss_midi.c +++ b/sound/core/seq/oss/seq_oss_midi.c @@ -615,9 +615,7 @@ send_midi_event(struct seq_oss_devinfo *dp, struct snd_seq_event *ev, struct seq if (!dp->timer->running) len = snd_seq_oss_timer_start(dp->timer); if (ev->type == SNDRV_SEQ_EVENT_SYSEX) { - if ((ev->flags & SNDRV_SEQ_EVENT_LENGTH_MASK) == SNDRV_SEQ_EVENT_LENGTH_VARIABLE) - snd_seq_oss_readq_puts(dp->readq, mdev->seq_device, - ev->data.ext.ptr, ev->data.ext.len); + snd_seq_oss_readq_sysex(dp->readq, mdev->seq_device, ev); } else { len = snd_midi_event_decode(mdev->coder, msg, sizeof(msg), ev); if (len > 0) diff --git a/sound/core/seq/oss/seq_oss_readq.c b/sound/core/seq/oss/seq_oss_readq.c index 654d17a5023c..dffc27374bdf 100644 --- a/sound/core/seq/oss/seq_oss_readq.c +++ b/sound/core/seq/oss/seq_oss_readq.c @@ -119,6 +119,35 @@ snd_seq_oss_readq_puts(struct seq_oss_readq *q, int dev, unsigned char *data, in return 0; } +/* + * put MIDI sysex bytes; the event buffer may be chained, thus it has + * to be expanded via snd_seq_dump_var_event(). + */ +struct readq_sysex_ctx { + struct seq_oss_readq *readq; + int dev; +}; + +static int readq_dump_sysex(void *ptr, void *buf, int count) +{ + struct readq_sysex_ctx *ctx = ptr; + + return snd_seq_oss_readq_puts(ctx->readq, ctx->dev, buf, count); +} + +int snd_seq_oss_readq_sysex(struct seq_oss_readq *q, int dev, + struct snd_seq_event *ev) +{ + struct readq_sysex_ctx ctx = { + .readq = q, + .dev = dev + }; + + if ((ev->flags & SNDRV_SEQ_EVENT_LENGTH_MASK) != SNDRV_SEQ_EVENT_LENGTH_VARIABLE) + return 0; + return snd_seq_dump_var_event(ev, readq_dump_sysex, &ctx); +} + /* * copy an event to input queue: * return zero if enqueued diff --git a/sound/core/seq/oss/seq_oss_readq.h b/sound/core/seq/oss/seq_oss_readq.h index f1463f1f449e..8d033ca2d23f 100644 --- a/sound/core/seq/oss/seq_oss_readq.h +++ b/sound/core/seq/oss/seq_oss_readq.h @@ -44,6 +44,8 @@ void snd_seq_oss_readq_delete(struct seq_oss_readq *q); void snd_seq_oss_readq_clear(struct seq_oss_readq *readq); unsigned int snd_seq_oss_readq_poll(struct seq_oss_readq *readq, struct file *file, poll_table *wait); int snd_seq_oss_readq_puts(struct seq_oss_readq *readq, int dev, unsigned char *data, int len); +int snd_seq_oss_readq_sysex(struct seq_oss_readq *q, int dev, + struct snd_seq_event *ev); int snd_seq_oss_readq_put_event(struct seq_oss_readq *readq, union evrec *ev); int snd_seq_oss_readq_put_timestamp(struct seq_oss_readq *readq, unsigned long curt, int seq_mode); int snd_seq_oss_readq_pick(struct seq_oss_readq *q, union evrec *rec);

7 years, 11 months

1
0
0 0

[Linux-stable-mirror] [PATCH] uas: Add US_FL_NO_ATA_1X quirk for one more Seagate device

by Hans de Goede

Just like all previous UAS capable Seagate disk enclosures, this one needs a US_FL_NO_ATA_1X quirk. Cc: stable(a)vger.kernel.org # 3.16 Reported-by: Wido <wido.gg(a)gmail.com> Signed-off-by: Hans de Goede <hdegoede(a)redhat.com> --- drivers/usb/storage/unusual_uas.h | 7 +++++++ 1 file changed, 7 insertions(+) diff --git a/drivers/usb/storage/unusual_uas.h b/drivers/usb/storage/unusual_uas.h index 2fe4fd336446..a1ddcbfb7323 100644 --- a/drivers/usb/storage/unusual_uas.h +++ b/drivers/usb/storage/unusual_uas.h @@ -114,6 +114,13 @@ UNUSUAL_DEV(0x0bc2, 0xab21, 0x0000, 0x9999, USB_SC_DEVICE, USB_PR_DEVICE, NULL, US_FL_NO_ATA_1X), +/* Reported-by: Wido <wido.gg(a)gmail.com> */ +UNUSUAL_DEV(0x0bc2, 0xab24, 0x0000, 0x9999, + "Seagate", + "BUP Slim BK", + USB_SC_DEVICE, USB_PR_DEVICE, NULL, + US_FL_NO_ATA_1X), + /* Reported-by: G. Richard Bellamy <rbellamy(a)pteradigm.com> */ UNUSUAL_DEV(0x0bc2, 0xab2a, 0x0000, 0x9999, "Seagate", -- 2.14.3

7 years, 11 months

3
5
0 0

Re: [Linux-stable-mirror] [PATCH 3.18 36/68] Handle mismatched open calls

by Greg Kroah-Hartman

On Fri, Jul 14, 2017 at 05:42:32PM +0100, Ben Hutchings wrote: > On Fri, 2017-05-05 at 11:32 -0700, Greg Kroah-Hartman wrote: > > 3.18-stable review patch. If anyone has any objections, please let me know. > > > > ------------------ > > > > From: Sachin Prabhu <sprabhu(a)redhat.com> > > > > commit 38bd49064a1ecb67baad33598e3d824448ab11ec upstream. > [...] > > --- a/fs/cifs/smb2ops.c > > +++ b/fs/cifs/smb2ops.c > > @@ -1461,6 +1461,8 @@ struct smb_version_operations smb21_oper > > .clear_stats = smb2_clear_stats, > > .print_stats = smb2_print_stats, > > .is_oplock_break = smb2_is_valid_oplock_break, > > + .handle_cancelled_mid = smb2_handle_cancelled_mid, > > + .handle_cancelled_mid = smb2_handle_cancelled_mid, > > .downgrade_oplock = smb2_downgrade_oplock, > > .need_neg = smb2_need_neg, > > .negotiate = smb2_negotiate, > > @@ -1542,6 +1544,8 @@ struct smb_version_operations smb30_oper > > .print_stats = smb2_print_stats, > > .dump_share_caps = smb2_dump_share_caps, > > .is_oplock_break = smb2_is_valid_oplock_break, > > + .handle_cancelled_mid = smb2_handle_cancelled_mid, > > + .handle_cancelled_mid = smb2_handle_cancelled_mid, > > .downgrade_oplock = smb2_downgrade_oplock, > > .need_neg = smb2_need_neg, > > .negotiate = smb2_negotiate, > [...] > > This doesn't look right. handle_cancelled_mid should be initialised > once in each of the 3 smb_version_operations structures, shouldn't it? Yeah, something is odd with this, I'll look into it later today, thanks for flagging it. greg k-h

7 years, 11 months

1
0
0 0

[Linux-stable-mirror] [PATCH] ALSA: usb-audio: Fix out-of-bound error

by Jaejoong Kim

The snd_usb_copy_string_desc() retrieves the usb string corresponding to the index number thought the usb_string(). And for NULL-terminated, insert '0' by using the return value of usb_string() as the index of buffer to hold the string. The problem is that the usb_string() also returns the length of the string read(>= 0), but it can also return a negative value, the error or status value of usb_control_msg(). If iClockSource is '0' as shown below, usb_string() will return -EINVAL. This will result in '0' being inserted into buf[-22], and the following KASAN out-of-bound error message will be output. AudioControl Interface Descriptor: bLength 8 bDescriptorType 36 bDescriptorSubtype 10 (CLOCK_SOURCE) bClockID 1 bmAttributes 0x07 Internal programmable Clock (synced to SOF) bmControls 0x07 Clock Frequency Control (read/write) Clock Validity Control (read-only) bAssocTerminal 0 iClockSource 0 To fix out-of-bound error, insert 0 only if the return value of usb_string() is greater than 0. ================================================================== BUG: KASAN: stack-out-of-bounds in parse_audio_unit+0x1327/0x1960 [snd_usb_audio] Write of size 1 at addr ffff88007e66735a by task systemd-udevd/18376 CPU: 0 PID: 18376 Comm: systemd-udevd Not tainted 4.13.0+ #3 Hardware name: LG Electronics 15N540-RFLGL/White Tip Mountain, BIOS 15N5 Call Trace: dump_stack+0x63/0x8d print_address_description+0x70/0x290 ? parse_audio_unit+0x1327/0x1960 [snd_usb_audio] kasan_report+0x265/0x350 __asan_store1+0x4a/0x50 parse_audio_unit+0x1327/0x1960 [snd_usb_audio] ? save_stack+0xb5/0xd0 ? save_stack_trace+0x1b/0x20 ? save_stack+0x46/0xd0 ? kasan_kmalloc+0xad/0xe0 ? kmem_cache_alloc_trace+0xff/0x230 ? snd_usb_create_mixer+0xb0/0x4b0 [snd_usb_audio] ? usb_audio_probe+0x4de/0xf40 [snd_usb_audio] ? usb_probe_interface+0x1f5/0x440 ? driver_probe_device+0x3ed/0x660 ? build_feature_ctl+0xb10/0xb10 [snd_usb_audio] ? save_stack_trace+0x1b/0x20 ? init_object+0x69/0xa0 ? snd_usb_find_csint_desc+0xa8/0xf0 [snd_usb_audio] snd_usb_mixer_controls+0x1dc/0x370 [snd_usb_audio] ? build_audio_procunit+0x890/0x890 [snd_usb_audio] ? snd_usb_create_mixer+0xb0/0x4b0 [snd_usb_audio] ? kmem_cache_alloc_trace+0xff/0x230 ? usb_ifnum_to_if+0xbd/0xf0 snd_usb_create_mixer+0x25b/0x4b0 [snd_usb_audio] ? snd_usb_create_stream+0x255/0x2c0 [snd_usb_audio] usb_audio_probe+0x4de/0xf40 [snd_usb_audio] ? snd_usb_autosuspend.part.7+0x30/0x30 [snd_usb_audio] ? __pm_runtime_idle+0x90/0x90 ? kernfs_activate+0xa6/0xc0 ? usb_match_one_id_intf+0xdc/0x130 ? __pm_runtime_set_status+0x2d4/0x450 usb_probe_interface+0x1f5/0x440 Cc: <stable(a)vger.kernel.org> Signed-off-by: Jaejoong Kim <climbbb.kim(a)gmail.com> --- The AudioControl Interface Descriptor in commit message is from lsusb output with real usb audio DAC. The usb audio product causing the OOB are as follows: http://www.lg.com/uk/lg-friends/lg-AFD-1200 It only prints OOB error and usb audio works well. :) sound/usb/mixer.c | 3 ++- 1 file changed, 2 insertions(+), 1 deletion(-) diff --git a/sound/usb/mixer.c b/sound/usb/mixer.c index e630813..5a83c2c 100644 --- a/sound/usb/mixer.c +++ b/sound/usb/mixer.c @@ -204,7 +204,8 @@ static int snd_usb_copy_string_desc(struct mixer_build *state, int index, char *buf, int maxlen) { int len = usb_string(state->chip->dev, index, buf, maxlen - 1); - buf[len] = 0; + if (len > 0) + buf[len] = 0; return len; } -- 2.7.4

7 years, 11 months

1
0
0 0

[Linux-stable-mirror] [PATCH AUTOSEL for 3.18 01/16] ACPICA: Resources: Not a valid resource if buffer length too long

by alexander.levin＠verizon.com

From: Bob Moore <robert.moore(a)intel.com> [ Upstream commit 57707a9a7780fab426b8ae9b4c7b65b912a748b3 ] ACPICA commit 9f76de2d249b18804e35fb55d14b1c2604d627a1 ACPICA commit b2e89d72ef1e9deefd63c3fd1dee90f893575b3a ACPICA commit 23b5bbe6d78afd3c5abf3adb91a1b098a3000b2e The declared buffer length must be the same as the length of the byte initializer list, otherwise not a valid resource descriptor. Link: https://github.com/acpica/acpica/commit/9f76de2d Link: https://github.com/acpica/acpica/commit/b2e89d72 Link: https://github.com/acpica/acpica/commit/23b5bbe6 Signed-off-by: Bob Moore <robert.moore(a)intel.com> Signed-off-by: Lv Zheng <lv.zheng(a)intel.com> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki(a)intel.com> Signed-off-by: Sasha Levin <alexander.levin(a)verizon.com> --- drivers/acpi/acpica/utresrc.c | 17 ++++++++++++----- 1 file changed, 12 insertions(+), 5 deletions(-) diff --git a/drivers/acpi/acpica/utresrc.c b/drivers/acpi/acpica/utresrc.c index 5cd017c7ac0e..94b3ee013761 100644 --- a/drivers/acpi/acpica/utresrc.c +++ b/drivers/acpi/acpica/utresrc.c @@ -421,8 +421,10 @@ acpi_ut_walk_aml_resources(struct acpi_walk_state *walk_state, ACPI_FUNCTION_TRACE(ut_walk_aml_resources); - /* The absolute minimum resource template is one end_tag descriptor */ - + /* + * The absolute minimum resource template is one end_tag descriptor. + * However, we will treat a lone end_tag as just a simple buffer. + */ if (aml_length < sizeof(struct aml_resource_end_tag)) { return_ACPI_STATUS(AE_AML_NO_RESOURCE_END_TAG); } @@ -454,9 +456,8 @@ acpi_ut_walk_aml_resources(struct acpi_walk_state *walk_state, /* Invoke the user function */ if (user_function) { - status = - user_function(aml, length, offset, resource_index, - context); + status = user_function(aml, length, offset, + resource_index, context); if (ACPI_FAILURE(status)) { return_ACPI_STATUS(status); } @@ -480,6 +481,12 @@ acpi_ut_walk_aml_resources(struct acpi_walk_state *walk_state, *context = aml; } + /* Check if buffer is defined to be longer than the resource length */ + + if (aml_length > (offset + length)) { + return_ACPI_STATUS(AE_AML_NO_RESOURCE_END_TAG); + } + /* Normal exit */ return_ACPI_STATUS(AE_OK); -- 2.11.0

7 years, 11 months

1
15
0 0

[Linux-stable-mirror] [PATCH AUTOSEL for 4.4 01/28] ACPICA: Resources: Not a valid resource if buffer length too long

by alexander.levin＠verizon.com

From: Bob Moore <robert.moore(a)intel.com> [ Upstream commit 57707a9a7780fab426b8ae9b4c7b65b912a748b3 ] ACPICA commit 9f76de2d249b18804e35fb55d14b1c2604d627a1 ACPICA commit b2e89d72ef1e9deefd63c3fd1dee90f893575b3a ACPICA commit 23b5bbe6d78afd3c5abf3adb91a1b098a3000b2e The declared buffer length must be the same as the length of the byte initializer list, otherwise not a valid resource descriptor. Link: https://github.com/acpica/acpica/commit/9f76de2d Link: https://github.com/acpica/acpica/commit/b2e89d72 Link: https://github.com/acpica/acpica/commit/23b5bbe6 Signed-off-by: Bob Moore <robert.moore(a)intel.com> Signed-off-by: Lv Zheng <lv.zheng(a)intel.com> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki(a)intel.com> Signed-off-by: Sasha Levin <alexander.levin(a)verizon.com> --- drivers/acpi/acpica/utresrc.c | 17 ++++++++++++----- 1 file changed, 12 insertions(+), 5 deletions(-) diff --git a/drivers/acpi/acpica/utresrc.c b/drivers/acpi/acpica/utresrc.c index b3505dbc715e..3f903f4855db 100644 --- a/drivers/acpi/acpica/utresrc.c +++ b/drivers/acpi/acpica/utresrc.c @@ -421,8 +421,10 @@ acpi_ut_walk_aml_resources(struct acpi_walk_state *walk_state, ACPI_FUNCTION_TRACE(ut_walk_aml_resources); - /* The absolute minimum resource template is one end_tag descriptor */ - + /* + * The absolute minimum resource template is one end_tag descriptor. + * However, we will treat a lone end_tag as just a simple buffer. + */ if (aml_length < sizeof(struct aml_resource_end_tag)) { return_ACPI_STATUS(AE_AML_NO_RESOURCE_END_TAG); } @@ -454,9 +456,8 @@ acpi_ut_walk_aml_resources(struct acpi_walk_state *walk_state, /* Invoke the user function */ if (user_function) { - status = - user_function(aml, length, offset, resource_index, - context); + status = user_function(aml, length, offset, + resource_index, context); if (ACPI_FAILURE(status)) { return_ACPI_STATUS(status); } @@ -480,6 +481,12 @@ acpi_ut_walk_aml_resources(struct acpi_walk_state *walk_state, *context = aml; } + /* Check if buffer is defined to be longer than the resource length */ + + if (aml_length > (offset + length)) { + return_ACPI_STATUS(AE_AML_NO_RESOURCE_END_TAG); + } + /* Normal exit */ return_ACPI_STATUS(AE_OK); -- 2.11.0

7 years, 11 months

1
27
0 0

[Linux-stable-mirror] [PATCH 2/2] clk: ti: dra7-atl-clock: fix child-node lookups

by Johan Hovold

Fix child node-lookup during probe, which ended up searching the whole device tree depth-first starting at parent rather than just matching on its children. Note that the original premature free of the parent node has already been fixed separately, but that fix was apparently never backported to stable. Fixes: 9ac33b0ce81f ("CLK: TI: Driver for DRA7 ATL (Audio Tracking Logic)") Fixes: 660e15519399 ("clk: ti: dra7-atl-clock: Fix of_node reference counting") Cc: stable <stable(a)vger.kernel.org> # 3.16: 660e15519399 Cc: Peter Ujfalusi <peter.ujfalusi(a)ti.com> Signed-off-by: Johan Hovold <johan(a)kernel.org> --- drivers/clk/ti/clk-dra7-atl.c | 3 +-- 1 file changed, 1 insertion(+), 2 deletions(-) diff --git a/drivers/clk/ti/clk-dra7-atl.c b/drivers/clk/ti/clk-dra7-atl.c index 13eb04f72389..148815470431 100644 --- a/drivers/clk/ti/clk-dra7-atl.c +++ b/drivers/clk/ti/clk-dra7-atl.c @@ -274,8 +274,7 @@ static int of_dra7_atl_clk_probe(struct platform_device *pdev) /* Get configuration for the ATL instances */ snprintf(prop, sizeof(prop), "atl%u", i); - of_node_get(node); - cfg_node = of_find_node_by_name(node, prop); + cfg_node = of_get_child_by_name(node, prop); if (cfg_node) { ret = of_property_read_u32(cfg_node, "bws", &cdesc->bws); -- 2.15.0

7 years, 11 months

3
2
0 0

[Linux-stable-mirror] + mm-fix-device-dax-pud-write-faults-triggered-by-get_user_pages.patch added to -mm tree

by akpm＠linux-foundation.org

The patch titled Subject: mm: fix device-dax pud write-faults triggered by get_user_pages() has been added to the -mm tree. Its filename is mm-fix-device-dax-pud-write-faults-triggered-by-get_user_pages.patch This patch should soon appear at http://ozlabs.org/~akpm/mmots/broken-out/mm-fix-device-dax-pud-write-faults… and later at http://ozlabs.org/~akpm/mmotm/broken-out/mm-fix-device-dax-pud-write-faults… Before you just go and hit "reply", please: a) Consider who else should be cc'ed b) Prefer to cc a suitable mailing list as well c) Ideally: find the original patch on the mailing list and do a reply-to-all to that, adding suitable additional cc's *** Remember to use Documentation/SubmitChecklist when testing your code *** The -mm tree is included into linux-next and is updated there every 3-4 working days ------------------------------------------------------ From: Dan Williams <dan.j.williams(a)intel.com> Subject: mm: fix device-dax pud write-faults triggered by get_user_pages() Currently only get_user_pages_fast() can safely handle the writable gup case due to its use of pud_access_permitted() to check whether the pud entry is writable. In the gup slow path pud_write() is used instead of pud_access_permitted() and to date it has been unimplemented, just calls BUG_ON(). kernel BUG at ./include/linux/hugetlb.h:244! [..] RIP: 0010:follow_devmap_pud+0x482/0x490 [..] Call Trace: follow_page_mask+0x28c/0x6e0 __get_user_pages+0xe4/0x6c0 get_user_pages_unlocked+0x130/0x1b0 get_user_pages_fast+0x89/0xb0 iov_iter_get_pages_alloc+0x114/0x4a0 nfs_direct_read_schedule_iovec+0xd2/0x350 ? nfs_start_io_direct+0x63/0x70 nfs_file_direct_read+0x1e0/0x250 nfs_file_read+0x90/0xc0 For now this just implements a simple check for the _PAGE_RW bit similar to pmd_write. However, this implies that the gup-slow-path check is missing the extra checks that the gup-fast-path performs with pud_access_permitted. Later patches will align all checks to use the 'access_permitted' helper if the architecture provides it. Note that the generic 'access_permitted' helper fallback is the simple _PAGE_RW check on architectures that do not define the 'access_permitted' helper(s). Link: http://lkml.kernel.org/r/151043109938.2842.14834662818213616199.stgit@dwill… Fixes: a00cc7d9dd93 ("mm, x86: add support for PUD-sized transparent hugepages") Signed-off-by: Dan Williams <dan.j.williams(a)intel.com> Cc: Kirill A. Shutemov <kirill.shutemov(a)linux.intel.com> Cc: Catalin Marinas <catalin.marinas(a)arm.com> Cc: "David S. Miller" <davem(a)davemloft.net> Cc: Thomas Gleixner <tglx(a)linutronix.de> Cc: Dave Hansen <dave.hansen(a)intel.com> Cc: Will Deacon <will.deacon(a)arm.com> Cc: "H. Peter Anvin" <hpa(a)zytor.com> Cc: Ingo Molnar <mingo(a)redhat.com> Cc: Arnd Bergmann <arnd(a)arndb.de> Cc: <stable(a)vger.kernel.org> Signed-off-by: Andrew Morton <akpm(a)linux-foundation.org> --- arch/arm64/include/asm/pgtable.h | 1 + arch/sparc/include/asm/pgtable_64.h | 1 + arch/x86/include/asm/pgtable.h | 6 ++++++ include/asm-generic/pgtable.h | 9 +++++++++ include/linux/hugetlb.h | 8 -------- 5 files changed, 17 insertions(+), 8 deletions(-) diff -puN arch/arm64/include/asm/pgtable.h~mm-fix-device-dax-pud-write-faults-triggered-by-get_user_pages arch/arm64/include/asm/pgtable.h --- a/arch/arm64/include/asm/pgtable.h~mm-fix-device-dax-pud-write-faults-triggered-by-get_user_pages +++ a/arch/arm64/include/asm/pgtable.h @@ -340,6 +340,7 @@ static inline int pmd_protnone(pmd_t pmd #define pfn_pmd(pfn,prot) (__pmd(((phys_addr_t)(pfn) << PAGE_SHIFT) | pgprot_val(prot))) #define mk_pmd(page,prot) pfn_pmd(page_to_pfn(page),prot) +#define __HAVE_ARCH_PUD_WRITE #define pud_write(pud) pte_write(pud_pte(pud)) #define pud_pfn(pud) (((pud_val(pud) & PUD_MASK) & PHYS_MASK) >> PAGE_SHIFT) diff -puN arch/sparc/include/asm/pgtable_64.h~mm-fix-device-dax-pud-write-faults-triggered-by-get_user_pages arch/sparc/include/asm/pgtable_64.h --- a/arch/sparc/include/asm/pgtable_64.h~mm-fix-device-dax-pud-write-faults-triggered-by-get_user_pages +++ a/arch/sparc/include/asm/pgtable_64.h @@ -723,6 +723,7 @@ static inline unsigned long pmd_write(pm return pte_write(pte); } +#define __HAVE_ARCH_PUD_WRITE #define pud_write(pud) pte_write(__pte(pud_val(pud))) #ifdef CONFIG_TRANSPARENT_HUGEPAGE diff -puN arch/x86/include/asm/pgtable.h~mm-fix-device-dax-pud-write-faults-triggered-by-get_user_pages arch/x86/include/asm/pgtable.h --- a/arch/x86/include/asm/pgtable.h~mm-fix-device-dax-pud-write-faults-triggered-by-get_user_pages +++ a/arch/x86/include/asm/pgtable.h @@ -1088,6 +1088,12 @@ static inline void pmdp_set_wrprotect(st clear_bit(_PAGE_BIT_RW, (unsigned long *)pmdp); } +#define __HAVE_ARCH_PUD_WRITE +static inline int pud_write(pud_t pud) +{ + return pud_flags(pud) & _PAGE_RW; +} + /* * clone_pgd_range(pgd_t *dst, pgd_t *src, int count); * diff -puN include/asm-generic/pgtable.h~mm-fix-device-dax-pud-write-faults-triggered-by-get_user_pages include/asm-generic/pgtable.h --- a/include/asm-generic/pgtable.h~mm-fix-device-dax-pud-write-faults-triggered-by-get_user_pages +++ a/include/asm-generic/pgtable.h @@ -812,6 +812,15 @@ static inline int pmd_write(pmd_t pmd) return 0; } #endif /* __HAVE_ARCH_PMD_WRITE */ + +#ifndef __HAVE_ARCH_PUD_WRITE +static inline int pud_write(pud_t pud) +{ + BUG(); + return 0; +} +#endif /* __HAVE_ARCH_PUD_WRITE */ + #endif /* CONFIG_TRANSPARENT_HUGEPAGE */ #if !defined(CONFIG_TRANSPARENT_HUGEPAGE) || \ diff -puN include/linux/hugetlb.h~mm-fix-device-dax-pud-write-faults-triggered-by-get_user_pages include/linux/hugetlb.h --- a/include/linux/hugetlb.h~mm-fix-device-dax-pud-write-faults-triggered-by-get_user_pages +++ a/include/linux/hugetlb.h @@ -239,14 +239,6 @@ static inline int pgd_write(pgd_t pgd) } #endif -#ifndef pud_write -static inline int pud_write(pud_t pud) -{ - BUG(); - return 0; -} -#endif - #define HUGETLB_ANON_FILE "anon_hugepage" enum { _ Patches currently in -mm which might be from dan.j.williams(a)intel.com are mm-fix-device-dax-pud-write-faults-triggered-by-get_user_pages.patch mm-replace-pud_write-with-pud_access_permitted-in-fault-gup-paths.patch mm-replace-pmd_write-with-pmd_access_permitted-in-fault-gup-paths.patch mm-replace-pte_write-with-pte_access_permitted-in-fault-gup-paths.patch

7 years, 11 months

1
0
0 0

[Linux-stable-mirror] [PATCH 1/1] hv: kvp: Avoid reading past allocated blocks from KVP file

by kys＠exchange.microsoft.com

From: Paul Meyer <Paul.Meyer(a)microsoft.com> While reading in more than one block (50) of KVP records, the allocation goes per block, but the reads used the total number of allocated records (without resetting the pointer/stream). This causes the records buffer to overrun when the refresh reads more than one block over the previous capacity (e.g. reading more than 100 KVP records whereas the in-memory database was empty before). Fix this by reading the correct number of KVP records from file each time. Signed-off-by: Paul Meyer <Paul.Meyer(a)microsoft.com> Signed-off-by: Long Li <longli(a)microsoft.com> Cc: stable(a)vger.kernel.org Signed-off-by: K. Y. Srinivasan <kys(a)microsoft.com> --- tools/hv/hv_kvp_daemon.c | 70 +++++++++------------------------------------ 1 files changed, 14 insertions(+), 56 deletions(-) diff --git a/tools/hv/hv_kvp_daemon.c b/tools/hv/hv_kvp_daemon.c index eaa3bec..4c99c57 100644 --- a/tools/hv/hv_kvp_daemon.c +++ b/tools/hv/hv_kvp_daemon.c @@ -193,11 +193,14 @@ static void kvp_update_mem_state(int pool) for (;;) { readp = &record[records_read]; records_read += fread(readp, sizeof(struct kvp_record), - ENTRIES_PER_BLOCK * num_blocks, - filep); + ENTRIES_PER_BLOCK * num_blocks - records_read, + filep); if (ferror(filep)) { - syslog(LOG_ERR, "Failed to read file, pool: %d", pool); + syslog(LOG_ERR, + "Failed to read file, pool: %d; error: %d %s", + pool, errno, strerror(errno)); + kvp_release_lock(pool); exit(EXIT_FAILURE); } @@ -210,6 +213,7 @@ static void kvp_update_mem_state(int pool) if (record == NULL) { syslog(LOG_ERR, "malloc failed"); + kvp_release_lock(pool); exit(EXIT_FAILURE); } continue; @@ -224,15 +228,11 @@ static void kvp_update_mem_state(int pool) fclose(filep); kvp_release_lock(pool); } + static int kvp_file_init(void) { int fd; - FILE *filep; - size_t records_read; char *fname; - struct kvp_record *record; - struct kvp_record *readp; - int num_blocks; int i; int alloc_unit = sizeof(struct kvp_record) * ENTRIES_PER_BLOCK; @@ -246,61 +246,19 @@ static int kvp_file_init(void) for (i = 0; i < KVP_POOL_COUNT; i++) { fname = kvp_file_info[i].fname; - records_read = 0; - num_blocks = 1; sprintf(fname, "%s/.kvp_pool_%d", KVP_CONFIG_LOC, i); fd = open(fname, O_RDWR | O_CREAT | O_CLOEXEC, 0644 /* rw-r--r-- */); if (fd == -1) return 1; - - filep = fopen(fname, "re"); - if (!filep) { - close(fd); - return 1; - } - - record = malloc(alloc_unit * num_blocks); - if (record == NULL) { - fclose(filep); - close(fd); - return 1; - } - for (;;) { - readp = &record[records_read]; - records_read += fread(readp, sizeof(struct kvp_record), - ENTRIES_PER_BLOCK, - filep); - - if (ferror(filep)) { - syslog(LOG_ERR, "Failed to read file, pool: %d", - i); - exit(EXIT_FAILURE); - } - - if (!feof(filep)) { - /* - * We have more data to read. - */ - num_blocks++; - record = realloc(record, alloc_unit * - num_blocks); - if (record == NULL) { - fclose(filep); - close(fd); - return 1; - } - continue; - } - break; - } kvp_file_info[i].fd = fd; - kvp_file_info[i].num_blocks = num_blocks; - kvp_file_info[i].records = record; - kvp_file_info[i].num_records = records_read; - fclose(filep); - + kvp_file_info[i].num_blocks = 1; + kvp_file_info[i].records = malloc(alloc_unit); + if (kvp_file_info[i].records == NULL) + return 1; + kvp_file_info[i].num_records = 0; + kvp_update_mem_state(i); } return 0; -- 1.7.1

7 years, 11 months

1
0
0 0

Re: [Linux-stable-mirror] [PATCH] watchdog: indydog: Add dependency on SGI_HAS_INDYDOG

by Ralf Baechle

On Tue, Nov 14, 2017 at 11:17:38AM +0000, James Hogan wrote: > On Tue, Nov 14, 2017 at 10:52:54AM +0000, Matt Redfearn wrote: > > Commit da2a68b3eb47 ("watchdog: Enable COMPILE_TEST where possible") > > enabled building the Indy watchdog driver when COMPILE_TEST is enabled. > > However, the driver makes reference to symbols that are only defined for > > certain platforms are selected in the config. These platforms select > > SGI_HAS_INDYDOG. Without this, link time errors result, for example > > when building a MIPS allyesconfig. > > > > drivers/watchdog/indydog.o: In function `indydog_write': > > indydog.c:(.text+0x18): undefined reference to `sgimc' > > indydog.c:(.text+0x1c): undefined reference to `sgimc' > > drivers/watchdog/indydog.o: In function `indydog_start': > > indydog.c:(.text+0x54): undefined reference to `sgimc' > > indydog.c:(.text+0x58): undefined reference to `sgimc' > > drivers/watchdog/indydog.o: In function `indydog_stop': > > indydog.c:(.text+0xa4): undefined reference to `sgimc' > > drivers/watchdog/indydog.o:indydog.c:(.text+0xa8): more undefined > > references to `sgimc' follow > > make: *** [Makefile:1005: vmlinux] Error 1 > > > > Fix this by ensuring that CONFIG_INDIDOG can only be selected when the > > necessary dependent platform symbols are built in. > > > > Fixes: da2a68b3eb47 ("watchdog: Enable COMPILE_TEST where possible") > > Signed-off-by: Matt Redfearn <matt.redfearn(a)mips.com> > > Cc: <stable(a)vger.kernel.org> # 4.11 + > > --- > > > > drivers/watchdog/Kconfig | 2 +- > > 1 file changed, 1 insertion(+), 1 deletion(-) > > > > diff --git a/drivers/watchdog/Kconfig b/drivers/watchdog/Kconfig > > index ca200d1f310a..d96e2e7544fc 100644 > > --- a/drivers/watchdog/Kconfig > > +++ b/drivers/watchdog/Kconfig > > @@ -1451,7 +1451,7 @@ config RC32434_WDT > > > > config INDYDOG > > tristate "Indy/I2 Hardware Watchdog" > > - depends on SGI_HAS_INDYDOG || (MIPS && COMPILE_TEST) > > + depends on SGI_HAS_INDYDOG || (MIPS && COMPILE_TEST && SGI_HAS_INDYDOG) > > (MIPS && COMPILE_TEST && SGI_HAS_INDYDOG) implies SGI_HAS_INDYDOG > > So I think you can just do: > - depends on SGI_HAS_INDYDOG || (MIPS && COMPILE_TEST) > + depends on SGI_HAS_INDYDOG > > I.e. COMPILE_TEST isn't of any value in this case. I agree, due to the references to sgimc this driver will only compile for the platforms which set SGI_HAS_INDYDOG; MIPS as the dependency is too generic. Updated patch for the watchdog maintainers' ease below. Ralf Signed-off-by: Ralf Baechle <ralf(a)linux-mips.org> Reported-by: Matt Redfearn <matt.redfearn(a)mips.com> Suggested-by: James Hogan <james.hogan(a)mips.com> drivers/watchdog/Kconfig | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/watchdog/Kconfig b/drivers/watchdog/Kconfig index c722cbfdc7e6..3ece1335ba84 100644 --- a/drivers/watchdog/Kconfig +++ b/drivers/watchdog/Kconfig @@ -1451,7 +1451,7 @@ config RC32434_WDT config INDYDOG tristate "Indy/I2 Hardware Watchdog" - depends on SGI_HAS_INDYDOG || (MIPS && COMPILE_TEST) + depends on SGI_HAS_INDYDOG help Hardware driver for the Indy's/I2's watchdog. This is a watchdog timer that will reboot the machine after a 60 second

7 years, 11 months

2
1
0 0

[Linux-stable-mirror] [PATCH] ibmveth: Kernel crash LSO offload flag toggle

by Bryant G. Ly

The following script when run (along with some iperf traffic recreates the crash within 5-10 mins or so). while true do ethtool -k ibmveth0 | grep tcp-segmentation-offload ethtool -K ibmveth0 tso off ethtool -k ibmveth0 | grep tcp-segmentation-offload ethtool -K ibmveth0 tso on done Note: This issue happens the very first time largsesend offload is turned off too (but the above script recreates the issue all the times) Stack trace output: [76563.914380] NIP [c000000000063940] memcpy_power7+0x40/0x800 [76563.914387] LR [d000000000d31788] ibmveth_start_xmit+0x1c8/0x8d0 [ibmveth] [76563.914392] Call Trace: [76563.914396] [c0000000feab3270] [c0000000feab32d0] 0xc0000000feab32d0 (unreliable) [76563.914407] [c0000000feab3360] [c0000000009816f4] dev_hard_start_xmit+0x304/0x530 [76563.914415] [c0000000feab3440] [c0000000009b6564] sch_direct_xmit+0x124/0x330 [76563.914423] [c0000000feab34e0] [c000000000981ddc] __dev_queue_xmit+0x26c/0x770 [76563.914431] [c0000000feab3580] [c000000000a1efc0] arp_xmit+0x30/0xd0 [76563.914438] [c0000000feab35f0] [c000000000a1f0f4] arp_send_dst.part.0+0x94/0xb0 [76563.914445] [c0000000feab3660] [c000000000a1fcb4] arp_solicit+0x114/0x2b0 [76563.914452] [c0000000feab3730] [c00000000098d8f4] neigh_probe+0x84/0xd0 [76563.914460] [c0000000feab3760] [c0000000009937cc] neigh_timer_handler+0xbc/0x320 [76563.914468] [c0000000feab37a0] [c00000000014a3fc] call_timer_fn+0x5c/0x1c0 [76563.914474] [c0000000feab3830] [c00000000014a8bc] run_timer_softirq+0x31c/0x3f0 [76563.914483] [c0000000feab3900] [c0000000000bec58] __do_softirq+0x188/0x3e0 [76563.914490] [c0000000feab39f0] [c0000000000bf128] irq_exit+0xc8/0x100 [76563.914498] [c0000000feab3a10] [c00000000001f974] timer_interrupt+0xa4/0xe0 [76563.914505] [c0000000feab3a40] [c000000000002714] decrementer_common+0x114/0x180 Oops output: [76563.914173] Unable to handle kernel paging request for data at address 0x00000000 [76563.914197] Faulting instruction address: 0xc000000000063940 [76563.914205] Oops: Kernel access of bad area, sig: 11 [#1] [76563.914210] SMP NR_CPUS=2048 NUMA pSeries [76563.914217] Modules linked in: rpadlpar_io rpaphp dccp_diag dccp tcp_diag udp_diag inet_diag unix_diag af_packet_diag netlink_diag nls_utf8 isofs binfmt_misc pseries_rng rtc_generic autofs4 ibmvfc scsi_transport_fc ibmvscsi ibmveth [76563.914251] CPU: 3 PID: 0 Comm: swapper/3 Not tainted 4.4.0-34-generic #53-Ubuntu [76563.914258] task: c0000000fe9efcc0 ti: c0000000feab0000 task.ti: c0000000feab0000 [76563.914265] NIP: c000000000063940 LR: d000000000d31788 CTR: c000000000064100 [76563.914271] REGS: c0000000feab2ff0 TRAP: 0300 Not tainted (4.4.0-34-generic) [76563.914277] MSR: 8000000000009033 <SF,EE,ME,IR,DR,RI,LE> CR: 4800284e XER: 0000001a [76563.914294] CFAR: c000000000008468 DAR: 0000000000000000 DSISR: 42000000 SOFTE: 1 GPR00: 000000000000f240 c0000000feab3270 c0000000015b5d00 0000000000000000 GPR04: c00000000d9b0004 000000000000002a 0000000000000006 c0000000efc0ccac GPR08: d000000000d3dd28 0000000000000080 0000000000000000 d000000000d34758 GPR12: c000000000064100 c00000000e7f1c80 c0000000ffdca938 0000000000000100 GPR16: c0000000ffdca738 c0000000ffdca538 c0000000feab34a0 c0000000015f4d00 GPR20: 0000000000000000 c0000000015f4cf0 c0000000f5945900 0000000000000000 GPR24: 0000000000000000 0000000080000000 c0000000feab32d0 c0000000efc0ccac GPR28: c0000000f23ccb00 c0000000f5945000 c0000000f23ccb00 c0000000efc0cc00 [76563.914380] NIP [c000000000063940] memcpy_power7+0x40/0x800 [76563.914387] LR [d000000000d31788] ibmveth_start_xmit+0x1c8/0x8d0 [ibmveth] [76563.914392] Call Trace: [76563.914396] [c0000000feab3270] [c0000000feab32d0] 0xc0000000feab32d0 (unreliable) [76563.914407] [c0000000feab3360] [c0000000009816f4] dev_hard_start_xmit+0x304/0x530 [76563.914415] [c0000000feab3440] [c0000000009b6564] sch_direct_xmit+0x124/0x330 [76563.914423] [c0000000feab34e0] [c000000000981ddc] __dev_queue_xmit+0x26c/0x770 [76563.914431] [c0000000feab3580] [c000000000a1efc0] arp_xmit+0x30/0xd0 [76563.914438] [c0000000feab35f0] [c000000000a1f0f4] arp_send_dst.part.0+0x94/0xb0 [76563.914445] [c0000000feab3660] [c000000000a1fcb4] arp_solicit+0x114/0x2b0 [76563.914452] [c0000000feab3730] [c00000000098d8f4] neigh_probe+0x84/0xd0 [76563.914460] [c0000000feab3760] [c0000000009937cc] neigh_timer_handler+0xbc/0x320 [76563.914468] [c0000000feab37a0] [c00000000014a3fc] call_timer_fn+0x5c/0x1c0 [76563.914474] [c0000000feab3830] [c00000000014a8bc] run_timer_softirq+0x31c/0x3f0 [76563.914483] [c0000000feab3900] [c0000000000bec58] __do_softirq+0x188/0x3e0 [76563.914490] [c0000000feab39f0] [c0000000000bf128] irq_exit+0xc8/0x100 [76563.914498] [c0000000feab3a10] [c00000000001f974] timer_interrupt+0xa4/0xe0 [76563.914505] [c0000000feab3a40] [c000000000002714] decrementer_common+0x114/0x180 [76563.914515] --- interrupt: 901 at plpar_hcall_norets+0x1c/0x28 [76563.914515] LR = check_and_cede_processor+0x34/0x50 [76563.914525] [c0000000feab3d30] [c000000000916bf0] check_and_cede_processor+0x20/0x50 (unreliable) [76563.914534] [c0000000feab3d90] [c000000000916e18] shared_cede_loop+0x68/0x170 [76563.914541] [c0000000feab3dd0] [c000000000913e20] cpuidle_enter_state+0x160/0x410 [76563.914549] [c0000000feab3e30] [c000000000119d48] call_cpuidle+0x78/0xd0 [76563.914556] [c0000000feab3e70] [c00000000011a11c] cpu_startup_entry+0x37c/0x480 [76563.914564] [c0000000feab3f30] [c00000000004563c] start_secondary+0x33c/0x360 [76563.914572] [c0000000feab3f90] [c000000000008b6c] start_secondary_prolog+0x10/0x14 [76563.914579] Instruction dump: [76563.914584] 4185024c 7cc400d0 7cd01120 78c60760 409f0014 88040000 38840001 98030000 [76563.914596] 38630001 409e0014 a0040000 38840002 <b0030000> 38630002 409d0014 80040000 [76563.914613] ---[ end trace 5382b3d78671418e ]--- [76563.916817] [76565.916870] Kernel panic - not syncing: Fatal exception in interrupt [76565.919468] ---[ end Kernel panic - not syncing: Fatal exception in interrupt Signed-off-by: Bryant G. Ly <bryantly(a)linux.vnet.ibm.com> Cc: <stable(a)vger.kernel.org> # 4.14+ --- drivers/net/ethernet/ibm/ibmveth.c | 13 ++++++++----- 1 file changed, 8 insertions(+), 5 deletions(-) diff --git a/drivers/net/ethernet/ibm/ibmveth.c b/drivers/net/ethernet/ibm/ibmveth.c index f210398200ece..971ed54332d42 100644 --- a/drivers/net/ethernet/ibm/ibmveth.c +++ b/drivers/net/ethernet/ibm/ibmveth.c @@ -1092,8 +1092,14 @@ static netdev_tx_t ibmveth_start_xmit(struct sk_buff *skb, */ if (force_bounce || (!skb_is_nonlinear(skb) && (skb->len < tx_copybreak))) { - skb_copy_from_linear_data(skb, adapter->bounce_buffer, - skb->len); + if (adapter->bounce_buffer) { + skb_copy_from_linear_data(skb, adapter->bounce_buffer, + skb->len); + } else { + adapter->tx_send_failed++; + netdev->stats.tx_dropped++; + goto out; + } descs[0].fields.flags_len = desc_flags | skb->len; descs[0].fields.address = adapter->bounce_buffer_dma; @@ -1691,9 +1697,6 @@ static int ibmveth_probe(struct vio_dev *dev, const struct vio_device_id *id) netdev->features |= NETIF_F_FRAGLIST; } - netdev->min_mtu = IBMVETH_MIN_MTU; - netdev->max_mtu = ETH_MAX_MTU; - memcpy(netdev->dev_addr, mac_addr_p, ETH_ALEN); if (firmware_has_feature(FW_FEATURE_CMO)) -- 2.13.6 (Apple Git-96)

7 years, 11 months

2
2
0 0

[Linux-stable-mirror] [PATCH 1/2] drm/i915: Re-register PMIC bus access notifier on runtime resume

by Hans de Goede

intel_uncore_suspend() unregisters the uncore code's PMIC bus access notifier and gets called on both normal and runtime suspend. intel_uncore_resume_early() re-registers the notifier, but only on normal resume. Add a new intel_uncore_runtime_resume() function which only re-registers the notifier and call that on runtime resume. Cc: stable(a)vger.kernel.org Reported-by: Imre Deak <imre.deak(a)intel.com> Reviewed-by: Imre Deak <imre.deak(a)intel.com> Signed-off-by: Hans de Goede <hdegoede(a)redhat.com> --- drivers/gpu/drm/i915/i915_drv.c | 2 ++ drivers/gpu/drm/i915/intel_uncore.c | 6 ++++++ drivers/gpu/drm/i915/intel_uncore.h | 1 + 3 files changed, 9 insertions(+) diff --git a/drivers/gpu/drm/i915/i915_drv.c b/drivers/gpu/drm/i915/i915_drv.c index e7e9e061073b..cdff9825a3da 100644 --- a/drivers/gpu/drm/i915/i915_drv.c +++ b/drivers/gpu/drm/i915/i915_drv.c @@ -2627,6 +2627,8 @@ static int intel_runtime_resume(struct device *kdev) ret = vlv_resume_prepare(dev_priv, true); } + intel_uncore_runtime_resume(dev_priv); + /* * No point of rolling back things in case of an error, as the best * we can do is to hope that things will still work (and disable RPM). diff --git a/drivers/gpu/drm/i915/intel_uncore.c b/drivers/gpu/drm/i915/intel_uncore.c index dbc5cc309cbc..9567ba385f41 100644 --- a/drivers/gpu/drm/i915/intel_uncore.c +++ b/drivers/gpu/drm/i915/intel_uncore.c @@ -557,6 +557,12 @@ void intel_uncore_resume_early(struct drm_i915_private *dev_priv) i915_check_and_clear_faults(dev_priv); } +void intel_uncore_runtime_resume(struct drm_i915_private *dev_priv) +{ + iosf_mbi_register_pmic_bus_access_notifier( + &dev_priv->uncore.pmic_bus_access_nb); +} + void intel_uncore_sanitize(struct drm_i915_private *dev_priv) { i915_modparams.enable_rc6 = diff --git a/drivers/gpu/drm/i915/intel_uncore.h b/drivers/gpu/drm/i915/intel_uncore.h index 582771251b57..9ce079b5dd0d 100644 --- a/drivers/gpu/drm/i915/intel_uncore.h +++ b/drivers/gpu/drm/i915/intel_uncore.h @@ -134,6 +134,7 @@ bool intel_uncore_arm_unclaimed_mmio_detection(struct drm_i915_private *dev_priv void intel_uncore_fini(struct drm_i915_private *dev_priv); void intel_uncore_suspend(struct drm_i915_private *dev_priv); void intel_uncore_resume_early(struct drm_i915_private *dev_priv); +void intel_uncore_runtime_resume(struct drm_i915_private *dev_priv); u64 intel_uncore_edram_size(struct drm_i915_private *dev_priv); void assert_forcewakes_inactive(struct drm_i915_private *dev_priv); -- 2.14.3

7 years, 11 months

1
0
0 0

[Linux-stable-mirror] [PATCH 2/2] Drivers: hv: vmbus: Fix a rescind issue

by kys＠exchange.microsoft.com

From: K. Y. Srinivasan <kys(a)microsoft.com> The current rescind processing code will not correctly handle the case where the host immediately rescinds a channel that has been offerred. In this case, we could be blocked in the open call and since the channel is rescinded, the host will not respond and we could be blocked forever in the vmbus open call.i Fix this problem. Signed-off-by: K. Y. Srinivasan <kys(a)microsoft.com> Cc: stable(a)vger.kernel.org --- drivers/hv/channel.c | 10 ++++++++-- drivers/hv/channel_mgmt.c | 7 ++++--- include/linux/hyperv.h | 1 + 3 files changed, 13 insertions(+), 5 deletions(-) diff --git a/drivers/hv/channel.c b/drivers/hv/channel.c index 19f0cf3..ba0a092 100644 --- a/drivers/hv/channel.c +++ b/drivers/hv/channel.c @@ -659,22 +659,28 @@ void vmbus_close(struct vmbus_channel *channel) */ return; } - mutex_lock(&vmbus_connection.channel_mutex); /* * Close all the sub-channels first and then close the * primary channel. */ list_for_each_safe(cur, tmp, &channel->sc_list) { cur_channel = list_entry(cur, struct vmbus_channel, sc_list); - vmbus_close_internal(cur_channel); if (cur_channel->rescind) { + wait_for_completion(&cur_channel->rescind_event); + mutex_lock(&vmbus_connection.channel_mutex); + vmbus_close_internal(cur_channel); hv_process_channel_removal( cur_channel->offermsg.child_relid); + } else { + mutex_lock(&vmbus_connection.channel_mutex); + vmbus_close_internal(cur_channel); } + mutex_unlock(&vmbus_connection.channel_mutex); } /* * Now close the primary. */ + mutex_lock(&vmbus_connection.channel_mutex); vmbus_close_internal(channel); mutex_unlock(&vmbus_connection.channel_mutex); } diff --git a/drivers/hv/channel_mgmt.c b/drivers/hv/channel_mgmt.c index ec5454f..c21020b 100644 --- a/drivers/hv/channel_mgmt.c +++ b/drivers/hv/channel_mgmt.c @@ -333,6 +333,7 @@ bool vmbus_prep_negotiate_resp(struct icmsg_hdr *icmsghdrp, return NULL; spin_lock_init(&channel->lock); + init_completion(&channel->rescind_event); INIT_LIST_HEAD(&channel->sc_list); INIT_LIST_HEAD(&channel->percpu_list); @@ -898,6 +899,7 @@ static void vmbus_onoffer_rescind(struct vmbus_channel_message_header *hdr) /* * Now wait for offer handling to complete. */ + vmbus_rescind_cleanup(channel); while (READ_ONCE(channel->probe_done) == false) { /* * We wait here until any channel offer is currently @@ -913,7 +915,6 @@ static void vmbus_onoffer_rescind(struct vmbus_channel_message_header *hdr) if (channel->device_obj) { if (channel->chn_rescind_callback) { channel->chn_rescind_callback(channel); - vmbus_rescind_cleanup(channel); return; } /* @@ -922,7 +923,6 @@ static void vmbus_onoffer_rescind(struct vmbus_channel_message_header *hdr) */ dev = get_device(&channel->device_obj->device); if (dev) { - vmbus_rescind_cleanup(channel); vmbus_device_unregister(channel->device_obj); put_device(dev); } @@ -936,13 +936,14 @@ static void vmbus_onoffer_rescind(struct vmbus_channel_message_header *hdr) * 2. Then close the primary channel. */ mutex_lock(&vmbus_connection.channel_mutex); - vmbus_rescind_cleanup(channel); if (channel->state == CHANNEL_OPEN_STATE) { /* * The channel is currently not open; * it is safe for us to cleanup the channel. */ hv_process_channel_removal(rescind->child_relid); + } else { + complete(&channel->rescind_event); } mutex_unlock(&vmbus_connection.channel_mutex); } diff --git a/include/linux/hyperv.h b/include/linux/hyperv.h index f3e97c5..6c93366 100644 --- a/include/linux/hyperv.h +++ b/include/linux/hyperv.h @@ -708,6 +708,7 @@ struct vmbus_channel { u8 monitor_bit; bool rescind; /* got rescind msg */ + struct completion rescind_event; u32 ringbuffer_gpadlhandle; -- 1.7.1

7 years, 11 months

1
0
0 0

[Linux-stable-mirror] [PATCH] net: mvneta: fix handling of the Tx descriptor counter

by Simon Guinot

The mvneta controller provides a 8-bit register to update the pending Tx descriptor counter. Then, a maximum of 255 Tx descriptors can be added at once. In the current code the mvneta_txq_pend_desc_add function assumes the caller takes care of this limit. But it is not the case. In some situations (xmit_more flag), more than 255 descriptors are added. When this happens, the Tx descriptor counter register is updated with a wrong value, which breaks the whole Tx queue management. This patch fixes the issue by allowing the mvneta_txq_pend_desc_add function to process more than 255 Tx descriptors. Fixes: 2a90f7e1d5d0 ("net: mvneta: add xmit_more support") Cc: stable(a)vger.kernel.org # 4.11+ Signed-off-by: Simon Guinot <simon.guinot(a)sequanux.org> --- drivers/net/ethernet/marvell/mvneta.c | 16 +++++++++------- 1 file changed, 9 insertions(+), 7 deletions(-) diff --git a/drivers/net/ethernet/marvell/mvneta.c b/drivers/net/ethernet/marvell/mvneta.c index 64a04975bcf8..027c08ce4e5d 100644 --- a/drivers/net/ethernet/marvell/mvneta.c +++ b/drivers/net/ethernet/marvell/mvneta.c @@ -816,11 +816,14 @@ static void mvneta_txq_pend_desc_add(struct mvneta_port *pp, { u32 val; - /* Only 255 descriptors can be added at once ; Assume caller - * process TX desriptors in quanta less than 256 - */ - val = pend_desc + txq->pending; - mvreg_write(pp, MVNETA_TXQ_UPDATE_REG(txq->id), val); + pend_desc += txq->pending; + + /* Only 255 Tx descriptors can be added at once */ + while (pend_desc > 0) { + val = min(pend_desc, 255); + mvreg_write(pp, MVNETA_TXQ_UPDATE_REG(txq->id), val); + pend_desc -= val; + } txq->pending = 0; } @@ -2413,8 +2416,7 @@ static int mvneta_tx(struct sk_buff *skb, struct net_device *dev) if (txq->count >= txq->tx_stop_threshold) netif_tx_stop_queue(nq); - if (!skb->xmit_more || netif_xmit_stopped(nq) || - txq->pending + frags > MVNETA_TXQ_DEC_SENT_MASK) + if (!skb->xmit_more || netif_xmit_stopped(nq)) mvneta_txq_pend_desc_add(pp, txq, frags); else txq->pending += frags; -- 2.9.3

7 years, 11 months

3
4
0 0

[Linux-stable-mirror] [PATCH] net: dsa: lan9303: correctly check return value of devm_gpiod_get_optional

by Pan Bian

Function devm_gpiod_get_optional() returns an ERR_PTR on failure. Its return value should not be validated by a NULL check. Instead, use IS_ERR. Signed-off-by: Pan Bian <bianpan2016(a)163.com> --- drivers/net/dsa/lan9303-core.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/net/dsa/lan9303-core.c b/drivers/net/dsa/lan9303-core.c index b471413..6d3fc8f 100644 --- a/drivers/net/dsa/lan9303-core.c +++ b/drivers/net/dsa/lan9303-core.c @@ -828,7 +828,7 @@ static void lan9303_probe_reset_gpio(struct lan9303 *chip, chip->reset_gpio = devm_gpiod_get_optional(chip->dev, "reset", GPIOD_OUT_LOW); - if (!chip->reset_gpio) { + if (IS_ERR(chip->reset_gpio)) { dev_dbg(chip->dev, "No reset GPIO defined\n"); return; } -- 1.9.1

7 years, 11 months

4
4
0 0

[Linux-stable-mirror] [PATCH for-next 0/6] IB/hfi1, qib, cm, sa: Last set for 4.15 merge window

by Dennis Dalessandro

Hi Doug, Here is the latest set of patches I have that we'd like to land in 4.15. There are some driver fixes, including a qib that is marked as stable. We also have a CM and SA patch thrown in the mix. As always patches available for browsing at: https://github.com/ddalessa/kernel/tree/for-4.15 --- Dennis Dalessandro (1): IB/hfi1: Initialize bth1 in 16B rc ack builder Don Hiatt (2): IB/hfi1: Mask the path bits with the LMC for 16B RC Acks IB/CM: Change sgid to IB GID when handling CM request Jan Sokolowski (1): IB/hfi1: Use 4096 for default active MTU in query_qp Mike Marciniszyn (1): IB/qib: Fix comparison error with qperf compare/swap test Venkata Sandeep Dhanalakota (1): IB/SA: Check dlid before SA agent queries for ClassPortInfo drivers/infiniband/core/cm.c | 38 ++++++++++++++++++++++++++++++++++-- drivers/infiniband/core/sa_query.c | 10 +++++++++ drivers/infiniband/hw/hfi1/rc.c | 10 +++++---- drivers/infiniband/hw/hfi1/verbs.c | 2 +- drivers/infiniband/hw/qib/qib_rc.c | 6 +++--- 5 files changed, 55 insertions(+), 11 deletions(-) -- -Denny

7 years, 11 months

1
1
0 0

[Linux-stable-mirror] [PATCH] iwlwifi: fix firmware names for 9xxx and a0 series hw

by Thomas Backlund

iwlwifi 9xxx and a0 series hw contains an extra dash in firmware file name as seeen in modinfo output for kernel 4.14: firmware: iwlwifi-9260-th-b0-jf-b0--34.ucode firmware: iwlwifi-9260-th-a0-jf-a0--34.ucode firmware: iwlwifi-9000-pu-a0-jf-b0--34.ucode firmware: iwlwifi-9000-pu-a0-jf-a0--34.ucode firmware: iwlwifi-QuQnj-a0-hr-a0--34.ucode firmware: iwlwifi-QuQnj-a0-jf-b0--34.ucode firmware: iwlwifi-QuQnj-f0-hr-a0--34.ucode firmware: iwlwifi-Qu-a0-jf-b0--34.ucode firmware: iwlwifi-Qu-a0-hr-a0--34.ucode Fix that by dropping the extra adding of '"-"'. Signed-off-by: Thomas Backlund <tmb(a)mageia.org> cc: Luca Coelho <luciano.coelho(a)intel.com> cc: stable(a)vger.kernel.org --- drivers/net/wireless/intel/iwlwifi/cfg/9000.c | 8 ++++---- drivers/net/wireless/intel/iwlwifi/cfg/a000.c | 10 +++++----- 2 files changed, 9 insertions(+), 9 deletions(-) diff --git a/drivers/net/wireless/intel/iwlwifi/cfg/9000.c b/drivers/net/wireless/intel/iwlwifi/cfg/9000.c index e8b5ff42f5a8..0b3fe4971fc9 100644 --- a/drivers/net/wireless/intel/iwlwifi/cfg/9000.c +++ b/drivers/net/wireless/intel/iwlwifi/cfg/9000.c @@ -77,13 +77,13 @@ #define IWL9260A_FW_PRE "iwlwifi-9260-th-a0-jf-a0-" #define IWL9260B_FW_PRE "iwlwifi-9260-th-b0-jf-b0-" #define IWL9000_MODULE_FIRMWARE(api) \ - IWL9000_FW_PRE "-" __stringify(api) ".ucode" + IWL9000_FW_PRE __stringify(api) ".ucode" #define IWL9000RFB_MODULE_FIRMWARE(api) \ - IWL9000RFB_FW_PRE "-" __stringify(api) ".ucode" + IWL9000RFB_FW_PRE __stringify(api) ".ucode" #define IWL9260A_MODULE_FIRMWARE(api) \ - IWL9260A_FW_PRE "-" __stringify(api) ".ucode" + IWL9260A_FW_PRE __stringify(api) ".ucode" #define IWL9260B_MODULE_FIRMWARE(api) \ - IWL9260B_FW_PRE "-" __stringify(api) ".ucode" + IWL9260B_FW_PRE __stringify(api) ".ucode" #define NVM_HW_SECTION_NUM_FAMILY_9000 10 diff --git a/drivers/net/wireless/intel/iwlwifi/cfg/a000.c b/drivers/net/wireless/intel/iwlwifi/cfg/a000.c index a440140ed8dd..7eade165b747 100644 --- a/drivers/net/wireless/intel/iwlwifi/cfg/a000.c +++ b/drivers/net/wireless/intel/iwlwifi/cfg/a000.c @@ -80,15 +80,15 @@ #define IWL_A000_HR_A0_FW_PRE "iwlwifi-QuQnj-a0-hr-a0-" #define IWL_A000_HR_MODULE_FIRMWARE(api) \ - IWL_A000_HR_FW_PRE "-" __stringify(api) ".ucode" + IWL_A000_HR_FW_PRE __stringify(api) ".ucode" #define IWL_A000_JF_MODULE_FIRMWARE(api) \ - IWL_A000_JF_FW_PRE "-" __stringify(api) ".ucode" + IWL_A000_JF_FW_PRE __stringify(api) ".ucode" #define IWL_A000_HR_F0_QNJ_MODULE_FIRMWARE(api) \ - IWL_A000_HR_F0_FW_PRE "-" __stringify(api) ".ucode" + IWL_A000_HR_F0_FW_PRE __stringify(api) ".ucode" #define IWL_A000_JF_B0_QNJ_MODULE_FIRMWARE(api) \ - IWL_A000_JF_B0_FW_PRE "-" __stringify(api) ".ucode" + IWL_A000_JF_B0_FW_PRE __stringify(api) ".ucode" #define IWL_A000_HR_A0_QNJ_MODULE_FIRMWARE(api) \ - IWL_A000_HR_A0_FW_PRE "-" __stringify(api) ".ucode" + IWL_A000_HR_A0_FW_PRE __stringify(api) ".ucode" #define NVM_HW_SECTION_NUM_FAMILY_A000 10 -- 2.14.3

7 years, 11 months

4
5
0 0

Re: [Linux-stable-mirror] [v2] cpufreq: powernv: Fix the frequency read by /proc/cpuinfo

by Michael Ellerman

On Fri, 2017-10-13 at 04:36:41 UTC, Shriya wrote: > The call to /proc/cpuinfo in turn calls cpufreq_quick_get() which > returns the last frequency requested by the kernel, but may not > reflect the actual frequency the processor is running at. > This patch makes a call to cpufreq_get() instead which returns the > current frequency reported by the hardware. > > Fixes : commit fb5153d05a7d ("powerpc: powernv: Implement > ppc_md.get_proc_freq()") > Cc: stable(a)vger.kernel.org > > Signed-off-by: Shriya <shriyak(a)linux.vnet.ibm.com> Applied to powerpc next, thanks. https://git.kernel.org/powerpc/c/cd77b5ce208c153260ed7882d8910f cheers

7 years, 11 months

1
0
0 0

[Linux-stable-mirror] [PATCH] watchdog: indydog: Add dependency on SGI_HAS_INDYDOG

by Matt Redfearn

Commit da2a68b3eb47 ("watchdog: Enable COMPILE_TEST where possible") enabled building the Indy watchdog driver when COMPILE_TEST is enabled. However, the driver makes reference to symbols that are only defined for certain platforms are selected in the config. These platforms select SGI_HAS_INDYDOG. Without this, link time errors result, for example when building a MIPS allyesconfig. drivers/watchdog/indydog.o: In function `indydog_write': indydog.c:(.text+0x18): undefined reference to `sgimc' indydog.c:(.text+0x1c): undefined reference to `sgimc' drivers/watchdog/indydog.o: In function `indydog_start': indydog.c:(.text+0x54): undefined reference to `sgimc' indydog.c:(.text+0x58): undefined reference to `sgimc' drivers/watchdog/indydog.o: In function `indydog_stop': indydog.c:(.text+0xa4): undefined reference to `sgimc' drivers/watchdog/indydog.o:indydog.c:(.text+0xa8): more undefined references to `sgimc' follow make: *** [Makefile:1005: vmlinux] Error 1 Fix this by ensuring that CONFIG_INDIDOG can only be selected when the necessary dependent platform symbols are built in. Fixes: da2a68b3eb47 ("watchdog: Enable COMPILE_TEST where possible") Signed-off-by: Matt Redfearn <matt.redfearn(a)mips.com> Cc: <stable(a)vger.kernel.org> # 4.11 + --- drivers/watchdog/Kconfig | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/watchdog/Kconfig b/drivers/watchdog/Kconfig index ca200d1f310a..d96e2e7544fc 100644 --- a/drivers/watchdog/Kconfig +++ b/drivers/watchdog/Kconfig @@ -1451,7 +1451,7 @@ config RC32434_WDT config INDYDOG tristate "Indy/I2 Hardware Watchdog" - depends on SGI_HAS_INDYDOG || (MIPS && COMPILE_TEST) + depends on SGI_HAS_INDYDOG || (MIPS && COMPILE_TEST && SGI_HAS_INDYDOG) help Hardware driver for the Indy's/I2's watchdog. This is a watchdog timer that will reboot the machine after a 60 second -- 2.7.4

7 years, 11 months

1
0
0 0

Re: [Linux-stable-mirror] [PATCH 4.13 00/33] 4.13.13-stable review

by Greg Kroah-Hartman

On Mon, Nov 13, 2017 at 02:02:12PM -0800, kernelci.org bot wrote: > stable-rc/linux-4.13.y boot: 127 boots: 10 failed, 116 passed with 1 conflict (v4.13.12-34-g109b28ca1340) > > Full Boot Summary: https://kernelci.org/boot/all/job/stable-rc/branch/linux-4.13.y/kernel/v4.1… > Full Build Summary: https://kernelci.org/build/stable-rc/branch/linux-4.13.y/kernel/v4.13.12-34… > > Tree: stable-rc > Branch: linux-4.13.y > Git Describe: v4.13.12-34-g109b28ca1340 > Git Commit: 109b28ca1340961002d4bede168f07823451b8e4 > Git URL: http://git.kernel.org/pub/scm/linux/kernel/git/stable/linux-stable-rc.git > Tested: 51 unique boards, 17 SoC families, 18 builds out of 188 > > Boot Regressions Detected: > > arm: > > at91_dt_defconfig: > at91rm9200ek_rootfs:nfs: > lab-free-electrons: new failure (last pass: v4.13.12) > > exynos_defconfig: > exynos4412-odroidx2_rootfs:nfs: > lab-collabora: failing since 4 days (last pass: v4.13.11-37-g2295c8345797 - first fail: v4.13.12) > exynos5250-snow_rootfs:nfs: > lab-collabora: failing since 4 days (last pass: v4.13.11-37-g2295c8345797 - first fail: v4.13.12) Thanks for these "failing since..." markings, that makes me feel better that I didn't break anything on my end :) greg k-h

7 years, 11 months

1
0
0 0

[Linux-stable-mirror] brcmfmac: remove setting IBSS mode when stopping AP

by Philipp Rosenberger

Hi, commit 9029679f66d976f8c720eb03c4898274803c9923 upstream. the patch "brcmfmac: remove setting IBSS mode when stopping AP" fixes a recurring warning[1] when we run our wifi in AP mode after we stopped an AP on the same card. We are using the 4.9 stable tree. But every kernel < 4.13 and >= 3.9 is affected by this problem. Best regards Philipp [1] The warning message with backtrace: [ 517.577475] brcmfmac: brcmf_update_bss_info: wl dtim_assoc failed (-23) [ 517.584567] ------------[ cut here ]------------ [ 517.594906] WARNING: CPU: 0 PID: 963 at /home/ilu/src/linux/net/wireless/sme.c:738 __cfg80211_connect_result+0x2dc/0x400 [cfg80211] [ 517.610126] Modules linked in: brcmfmac brcmutil cfg80211 [ 517.615752] CPU: 0 PID: 963 Comm: kworker/u2:2 Tainted: G W 4.9.56-sde-00010-g3b9115e #18 [ 517.627723] Hardware name: Freescale i.MX6 Quad/DualLite (Device Tree) [ 517.634647] Workqueue: cfg80211 cfg80211_event_work [cfg80211] [ 517.642070] [<c010f270>] (unwind_backtrace) from [<c010c4f0>] (show_stack+0x10/0x14) [ 517.652696] [<c010c4f0>] (show_stack) from [<c011cab4>] (__warn+0xe8/0x100) [ 517.661193] [<c011cab4>] (__warn) from [<c011cb7c>] (warn_slowpath_null+0x20/0x28) [ 517.670507] [<c011cb7c>] (warn_slowpath_null) from [<bf02f6a4>] (__cfg80211_connect_result+0x2dc/0x400 [cfg80211]) [ 517.682888] [<bf02f6a4>] (__cfg80211_connect_result [cfg80211]) from [<bf00564c>] (cfg80211_process_wdev_events+0x178/0x1f8 [cfg80211]) [ 517.696985] [<bf00564c>] (cfg80211_process_wdev_events [cfg80211]) from [<bf0056f8>] (cfg80211_process_rdev_events+0x2c/0x60 [cfg80211]) [ 517.711110] [<bf0056f8>] (cfg80211_process_rdev_events [cfg80211]) from [<bf00027c>] (cfg80211_event_work+0x14/0x1c [cfg80211]) [ 517.724539] [<bf00027c>] (cfg80211_event_work [cfg80211]) from [<c01358cc>] (process_one_work+0x12c/0x518) [ 517.735875] [<c01358cc>] (process_one_work) from [<c0135cf0>] (worker_thread+0x38/0x5d8) [ 517.745234] [<c0135cf0>] (worker_thread) from [<c013b32c>] (kthread+0xf0/0x108) [ 517.754090] [<c013b32c>] (kthread) from [<c0108498>] (ret_from_fork+0x14/0x3c) [ 517.762967] ---[ end trace f68728a0d3053b54 ]--- [ 517.770431] IPv6: ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready

7 years, 11 months

1
0
0 0

Re: [Linux-stable-mirror] [PATCH 1/2] arm64: mm: abort uaccess retries upon fatal signal

by Rabin Vincent

On Tue, Aug 22, 2017 at 10:45:24AM +0100, Will Deacon wrote: > On Mon, Aug 21, 2017 at 02:42:03PM +0100, Mark Rutland wrote: > > On Tue, Jul 11, 2017 at 03:58:49PM +0100, Will Deacon wrote: > > > On Tue, Jul 11, 2017 at 03:19:22PM +0100, Mark Rutland wrote: > > > > When there's a fatal signal pending, arm64's do_page_fault() > > > > implementation returns 0. The intent is that we'll return to the > > > > faulting userspace instruction, delivering the signal on the way. > > > > > > > > However, if we take a fatal signal during fixing up a uaccess, this > > > > results in a return to the faulting kernel instruction, which will be > > > > instantly retried, resulting in the same fault being taken forever. As > > > > the task never reaches userspace, the signal is not delivered, and the > > > > task is left unkillable. While the task is stuck in this state, it can > > > > inhibit the forward progress of the system. > > > > > > > > To avoid this, we must ensure that when a fatal signal is pending, we > > > > apply any necessary fixup for a faulting kernel instruction. Thus we > > > > will return to an error path, and it is up to that code to make forward > > > > progress towards delivering the fatal signal. > > > > > > > > Signed-off-by: Mark Rutland <mark.rutland(a)arm.com> > > > > Reviewed-by: Steve Capper <steve.capper(a)arm.com> > > > > Tested-by: Steve Capper <steve.capper(a)arm.com> > > > > Cc: Catalin Marinas <catalin.marinas(a)arm.com> > > > > Cc: James Morse <james.morse(a)arm.com> > > > > Cc: Laura Abbott <labbott(a)redhat.com> > > > > Cc: Will Deacon <will.deacon(a)arm.com> > > > > Cc: stable(a)vger.kernel.org > > > > --- > > > > arch/arm64/mm/fault.c | 5 ++++- > > > > 1 file changed, 4 insertions(+), 1 deletion(-) > > > > > > > > diff --git a/arch/arm64/mm/fault.c b/arch/arm64/mm/fault.c > > > > index 37b95df..3952d5e 100644 > > > > --- a/arch/arm64/mm/fault.c > > > > +++ b/arch/arm64/mm/fault.c > > > > @@ -397,8 +397,11 @@ static int __kprobes do_page_fault(unsigned long addr, unsigned int esr, > > > > * signal first. We do not need to release the mmap_sem because it > > > > * would already be released in __lock_page_or_retry in mm/filemap.c. > > > > */ > > > > - if ((fault & VM_FAULT_RETRY) && fatal_signal_pending(current)) > > > > + if ((fault & VM_FAULT_RETRY) && fatal_signal_pending(current)) { > > > > + if (!user_mode(regs)) > > > > + goto no_context; > > > > return 0; > > > > + } > > > > > > This will need rebasing at -rc1 (take a look at current HEAD). > > > > > > Also, I think it introduces a weird corner case where we take a page fault > > > when writing the signal frame to the user stack to deliver a SIGSEGV. If > > > we end up with VM_FAULT_RETRY and somebody has sent a SIGKILL to the task, > > > then we'll fail setup_sigframe and force an un-handleable SIGSEGV instead > > > of SIGKILL. > > > > > > The end result (task is killed) is the same, but the fatal signal is wrong. > > > > That doesn't seem to be the case, testing on v4.13-rc5. > > > > I used sigaltstack() to use the userfaultfd region as signal stack, > > registerd a SIGSEGV handler, and dereferenced NULL. The task locks up, > > but when killed with a SIGINT or SIGKILL, the exit status reflects that > > signal, rather than the SIGSEGV. > > > > If I move the SIGINT handler onto the userfaultfd-monitored stack, then > > delivering SIGINT hangs, but can be killed with SIGKILL, and the exit > > status reflects that SIGKILL. > > > > As you say, it does look like we'd try to set up a deferred SIGSEGV for > > the failed signal delivery. > > > > I haven't yet figured out exactly how that works; I'll keep digging. > > The SEGV makes it all the way into do_group_exit, but then signal_group_exit > is set and the exit_code is overridden with SIGKILL at the last minute (see > complete_signal). Unfortunately, this last minute is too late for print-fatal-signals. With print-fatal-signals enabled, this patch leads to misleading "potentially unexpected fatal signal 11" warnings if a process is SIGKILL'd at the right time. I've seen it without userfaultfd, but it's easiest reproduced by patching Mark's original test code [1] with the following patch and simply running "pkill -WINCH foo; pkill -KILL foo". This results in: foo: potentially unexpected fatal signal 11. CPU: 1 PID: 1793 Comm: foo Not tainted 4.9.58-devel #3 task: b3534780 task.stack: b4b7c000 PC is at 0x76effb60 LR is at 0x4227f4 pc : [<76effb60>] lr : [<004227f4>] psr: 600b0010 sp : 7eaf7bb4 ip : 00000000 fp : 00000000 r10: 00000001 r9 : 00000003 r8 : 76fcd000 r7 : 0000001d r6 : 76fd0cf0 r5 : 7eaf7c08 r4 : 00000000 r3 : 00000000 r2 : 00000000 r1 : 7eaf7a88 r0 : fffffffc Flags: nZCv IRQs on FIQs on Mode USER_32 ISA ARM Segment user Control: 10c5387d Table: 3357404a DAC: 00000055 CPU: 1 PID: 1793 Comm: foo Not tainted 4.9.58-devel #3 [<801113f0>] (unwind_backtrace) from [<8010cfb0>] (show_stack+0x18/0x1c) [<8010cfb0>] (show_stack) from [<8039725c>] (dump_stack+0x84/0x98) [<8039725c>] (dump_stack) from [<8012f448>] (get_signal+0x384/0x684) [<8012f448>] (get_signal) from [<8010c2ec>] (do_signal+0xcc/0x470) [<8010c2ec>] (do_signal) from [<8010c868>] (do_work_pending+0xb8/0xc8) [<8010c868>] (do_work_pending) from [<801086d4>] (slow_work_pending+0xc/0x20) This is ARM and I haven't tested ARM64, but the same problem even exists on x86. --- foo.c.orig 2017-11-13 23:45:47.802167284 +0100 +++ foo.c 2017-11-14 07:16:13.906363466 +0100 @@ -6,6 +6,11 @@ #include <sys/syscall.h> #include <sys/vfs.h> #include <unistd.h> +#include <signal.h> + +static void handler(int sig) +{ +} int main(int argc, char *argv[]) { @@ -47,13 +52,17 @@ if (ret < 0) return errno; + sigaltstack(&(stack_t){.ss_sp = mem, .ss_size = pagesz}, NULL); + sigaction(SIGWINCH, &(struct sigaction){ .sa_handler = handler, .sa_flags = SA_ONSTACK, }, NULL); + /* * Force an arbitrary uaccess to memory monitored by the userfaultfd. * This will block, but when a SIGKILL is sent, will consume all * available CPU time without being killed, and may inhibit forward * progress of the system. */ - ret = fstatfs(0, (struct statfs *)mem); + // ret = fstatfs(0, (struct statfs *)mem); + pause(); return 0; } [1] https://lkml.kernel.org/r/1499782590-31366-1-git-send-email-mark.rutland@ar…

7 years, 11 months

1
0
0 0

[Linux-stable-mirror] [PATCH 1/2] drm/i915: Fix vblank timestamp/frame counter jumps on gen2

by Ville Syrjala

From: Ville Syrjälä <ville.syrjala(a)linux.intel.com> Previously I was under the impression that the scanline counter reads 0 when the pipe is off. Turns out that's not correct, and instead the scanline counter simply stops when the pipe stops, and it retains it's last value until the pipe starts up again, at which point the scanline counter jumps to vblank start. These jumps can cause the timestamp to jump backwards by one frame. Since we use the timestamps to guesstimage also the frame counter value on gen2, that would cause the frame counter to also jump backwards, which leads to a massice difference from the previous value. The end result is that flips/vblank events don't appear to complete as they're stuck waiting for the frame counter to catch up to that massive difference. Fix the problem properly by actually making sure the scanline counter has started to move before we assume that it's safe to enable vblank processing. Cc: stable(a)vger.kernel.org Cc: Daniel Vetter <daniel.vetter(a)ffwll.ch> Fixes: b7792d8b54cc ("drm/i915: Wait for pipe to start before sampling vblank timestamps on gen2") Signed-off-by: Ville Syrjälä <ville.syrjala(a)linux.intel.com> --- drivers/gpu/drm/i915/intel_display.c | 34 ++++++++++++++++++++++------------ 1 file changed, 22 insertions(+), 12 deletions(-) diff --git a/drivers/gpu/drm/i915/intel_display.c b/drivers/gpu/drm/i915/intel_display.c index 0ebf3f283b87..810b1147a0ac 100644 --- a/drivers/gpu/drm/i915/intel_display.c +++ b/drivers/gpu/drm/i915/intel_display.c @@ -998,7 +998,8 @@ enum transcoder intel_pipe_to_cpu_transcoder(struct drm_i915_private *dev_priv, return crtc->config->cpu_transcoder; } -static bool pipe_dsl_stopped(struct drm_i915_private *dev_priv, enum pipe pipe) +static bool pipe_dsl_stopped(struct drm_i915_private *dev_priv, + enum pipe pipe, bool stopped) { i915_reg_t reg = PIPEDSL(pipe); u32 line1, line2; @@ -1013,7 +1014,7 @@ static bool pipe_dsl_stopped(struct drm_i915_private *dev_priv, enum pipe pipe) msleep(5); line2 = I915_READ(reg) & line_mask; - return line1 == line2; + return (line1 == line2) == stopped; } /* @@ -1048,11 +1049,21 @@ static void intel_wait_for_pipe_off(struct intel_crtc *crtc) WARN(1, "pipe_off wait timed out\n"); } else { /* Wait for the display line to settle */ - if (wait_for(pipe_dsl_stopped(dev_priv, pipe), 100)) + if (wait_for(pipe_dsl_stopped(dev_priv, pipe, true), 100)) WARN(1, "pipe_off wait timed out\n"); } } +static void intel_wait_for_pipe_on(struct intel_crtc *crtc) +{ + struct drm_i915_private *dev_priv = to_i915(crtc->base.dev); + enum pipe pipe = crtc->pipe; + + /* Wait for the display line to start moving */ + if (wait_for(pipe_dsl_stopped(dev_priv, pipe, false), 100)) + WARN(1, "pipe_on wait timed out\n"); +} + /* Only for pre-ILK configs */ void assert_pll(struct drm_i915_private *dev_priv, enum pipe pipe, bool state) @@ -1935,15 +1946,14 @@ static void intel_enable_pipe(struct intel_crtc *crtc) POSTING_READ(reg); /* - * Until the pipe starts DSL will read as 0, which would cause - * an apparent vblank timestamp jump, which messes up also the - * frame count when it's derived from the timestamps. So let's - * wait for the pipe to start properly before we call - * drm_crtc_vblank_on() + * Until the pipe starts DSL can give a bogus value, which cause + * an apparent vblank timestamp jump when the DSL resets to its + * proper value, which messes up also the frame count when it's + * derived from the timestamps. So let's wait for the pipe to + * start properly before we call drm_crtc_vblank_on() */ - if (dev->max_vblank_count == 0 && - wait_for(intel_get_crtc_scanline(crtc) != crtc->scanline_offset, 50)) - DRM_ERROR("pipe %c didn't start\n", pipe_name(pipe)); + if (dev->max_vblank_count == 0) + intel_wait_for_pipe_on(crtc); } /** @@ -14707,7 +14717,7 @@ void i830_disable_pipe(struct drm_i915_private *dev_priv, enum pipe pipe) I915_WRITE(PIPECONF(pipe), 0); POSTING_READ(PIPECONF(pipe)); - if (wait_for(pipe_dsl_stopped(dev_priv, pipe), 100)) + if (wait_for(pipe_dsl_stopped(dev_priv, pipe, true), 100)) DRM_ERROR("pipe %c off wait timed out\n", pipe_name(pipe)); I915_WRITE(DPLL(pipe), DPLL_VGA_MODE_DIS); -- 2.13.6

7 years, 11 months

3
2
0 0

Re: [Linux-stable-mirror] [PATCH 4.4 34/46] crypto: xts - Add ECB dependency

by Ben Hutchings

On Thu, 2017-10-19 at 15:49 +0200, Greg Kroah-Hartman wrote: > 4.4-stable review patch. If anyone has any objections, please let me > know. > > ------------------ > > From: Milan Broz <gmazyland(a)gmail.com> > > > [ Upstream commit 12cb3a1c4184f891d965d1f39f8cfcc9ef617647 ] > > Since the > commit f1c131b45410a202eb45cc55980a7a9e4e4b4f40 > crypto: xts - Convert to skcipher That commit went into 4.10, and not any stable branches. So this fix doesn't appear to be appropriate for the older branches it was applied to. Ben. > the XTS mode is based on ECB, so the mode must select > ECB otherwise it can fail to initialize. > > Signed-off-by: Milan Broz <gmazyland(a)gmail.com> > Signed-off-by: Herbert Xu <herbert(a)gondor.apana.org.au> > Signed-off-by: Sasha Levin <alexander.levin(a)verizon.com> > Signed-off-by: Greg Kroah-Hartman <gregkh(a)linuxfoundation.org> > --- > crypto/Kconfig | 1 + > 1 file changed, 1 insertion(+) > > --- a/crypto/Kconfig > +++ b/crypto/Kconfig > @@ -343,6 +343,7 @@ config CRYPTO_XTS > select CRYPTO_BLKCIPHER > select CRYPTO_MANAGER > select CRYPTO_GF128MUL > + select CRYPTO_ECB > help > XTS: IEEE1619/D16 narrow block cipher use with aes-xts- > plain, > key size 256, 384 or 512 bits. This implementation > currently > > > -- Ben Hutchings Software Developer, Codethink Ltd.

7 years, 11 months

2
1
0 0

Re: [Linux-stable-mirror] [PATCH 4.4 41/46] uapi: fix linux/rds.h userspace compilation errors

by Ben Hutchings

On Thu, 2017-10-19 at 15:49 +0200, Greg Kroah-Hartman wrote: > 4.4-stable review patch. If anyone has any objections, please let me know. > > ------------------ > > From: "Dmitry V. Levin" <ldv(a)altlinux.org> > > > [ Upstream commit feb0869d90e51ce8b6fd8a46588465b1b5a26d09 ] > > Consistently use types from linux/types.h to fix the following > linux/rds.h userspace compilation errors: [...] > --- a/include/uapi/linux/rds.h > +++ b/include/uapi/linux/rds.h > @@ -35,6 +35,7 @@ > #define _LINUX_RDS_H > > #include <linux/types.h> > +#include <linux/socket.h> /* For __kernel_sockaddr_storage. */ > > #define RDS_IB_ABI_VERSION 0x301 > > @@ -223,7 +224,7 @@ struct rds_get_mr_args { > }; > > struct rds_get_mr_for_dest_args { > - struct sockaddr_storage dest_addr; > + struct __kernel_sockaddr_storage dest_addr; > struct rds_iovec vec; > uint64_t cookie_addr; > uint64_t flags; This is a valid fix but not the one that the commit message and upstream commit hash refer to. This diff matches: commit 1786dbf3702e33ce3afd2d3dbe630bd04b1d2e58 Author: Dmitry V. Levin <ldv(a)altlinux.org> Date: Thu Feb 16 18:05:45 2017 +0300 uapi: fix linux/rds.h userspace compilation error which has almost the same subject line. Maybe you should cherry-pick commit feb0869d90e51ce8b6fd8a46588465b1b5a26d09 for real as well (in all branches). Ben. -- Ben Hutchings Software Developer, Codethink Ltd.

7 years, 11 months

2
1
0 0

[Linux-stable-mirror] [PATCH] arm64: dts: marvell: mark the cp110 crypto engine as dma coherent

by Antoine Tenart

commit ec0aef9881d18aa781268ec9cba8eba5b202f5b4 upstream. The crypto engines found on the cp110 master and slave are dma coherent. This patch adds the relevant property to their dt nodes. Cc: stable(a)vger.kernel.org # v4.12+ Fixes: 973020fd9498 ("arm64: marvell: dts: add crypto engine description for 7k/8k") Signed-off-by: Antoine Tenart <antoine.tenart(a)free-electrons.com> Signed-off-by: Gregory CLEMENT <gregory.clement(a)free-electrons.com> Signed-off-by: Antoine Tenart <antoine.tenart(a)free-electrons.com> --- Hi, This patch did not apply to the 4.12-stable tree. Since the original patch made it to Linus tree, this is a version which applies nicely to the 4.12-stable tree. Thanks, Antoine arch/arm64/boot/dts/marvell/armada-cp110-master.dtsi | 1 + arch/arm64/boot/dts/marvell/armada-cp110-slave.dtsi | 1 + 2 files changed, 2 insertions(+) diff --git a/arch/arm64/boot/dts/marvell/armada-cp110-master.dtsi b/arch/arm64/boot/dts/marvell/armada-cp110-master.dtsi index b4bc42ece754..4e81130ae84a 100644 --- a/arch/arm64/boot/dts/marvell/armada-cp110-master.dtsi +++ b/arch/arm64/boot/dts/marvell/armada-cp110-master.dtsi @@ -240,6 +240,7 @@ interrupt-names = "mem", "ring0", "ring1", "ring2", "ring3", "eip"; clocks = <&cpm_syscon0 1 26>; + dma-coherent; status = "disabled"; }; }; diff --git a/arch/arm64/boot/dts/marvell/armada-cp110-slave.dtsi b/arch/arm64/boot/dts/marvell/armada-cp110-slave.dtsi index 6e2058847ddc..b987565107f3 100644 --- a/arch/arm64/boot/dts/marvell/armada-cp110-slave.dtsi +++ b/arch/arm64/boot/dts/marvell/armada-cp110-slave.dtsi @@ -230,6 +230,7 @@ interrupt-names = "mem", "ring0", "ring1", "ring2", "ring3", "eip"; clocks = <&cps_syscon0 1 26>; + dma-coherent; status = "disabled"; }; }; -- 2.14.3

7 years, 11 months

2
3
0 0

[Linux-stable-mirror] v4.14 build: 0 failures 0 warnings (v4.14)

by Build bot for Mark Brown

Tree/Branch: v4.14 Git describe: v4.14 Commit: bebc6082da Linux 4.14 Build Time: 97 min 53 sec Passed: 10 / 10 (100.00 %) Failed: 0 / 10 ( 0.00 %) Errors: 0 Warnings: 0 Section Mismatches: 0 ------------------------------------------------------------------------------- defconfigs with issues (other than build errors): ------------------------------------------------------------------------------- =============================================================================== Detailed per-defconfig build reports below: ------------------------------------------------------------------------------- Passed with no errors, warnings or mismatches: arm64-allnoconfig arm64-allmodconfig arm-multi_v5_defconfig arm-multi_v7_defconfig x86_64-defconfig arm-allmodconfig arm-allnoconfig x86_64-allnoconfig arm-multi_v4t_defconfig arm64-defconfig close failed in file object destructor: sys.excepthook is missing lost sys.stderr

7 years, 11 months

1
0
0 0

Re: [Linux-stable-mirror] [PATCH] net: mvneta: fix handling of the Tx descriptor counter

by David Miller

From: Simon Guinot <simon.guinot(a)sequanux.org> Date: Mon, 13 Nov 2017 15:51:15 +0100 > IIUC the driver stops the queue if a threshold of 316 Tx descriptors is > reached (default and worst value). That's a lot of latency.

7 years, 11 months

1
0
0 0

[Linux-stable-mirror] [PATCH 4.13 00/33] 4.13.13-stable review

by Greg Kroah-Hartman

This is the start of the stable review cycle for the 4.13.13 release. There are 33 patches in this series, all will be posted as a response to this one. If anyone has any issues with these being applied, please let me know. Responses should be made by Wed Nov 15 12:55:46 UTC 2017. Anything received after that time might be too late. The whole patch series can be found in one patch at: kernel.org/pub/linux/kernel/v4.x/stable-review/patch-4.13.13-rc1.gz or in the git tree and branch at: git://git.kernel.org/pub/scm/linux/kernel/git/stable/linux-stable-rc.git linux-4.13.y and the diffstat can be found below. thanks, greg k-h ------------- Pseudo-Shortlog of commits: Greg Kroah-Hartman <gregkh(a)linuxfoundation.org> Linux 4.13.13-rc1 Borislav Petkov <bp(a)suse.de> x86/oprofile/ppro: Do not use __this_cpu*() in preemptible context Pavel Tatashin <pasha.tatashin(a)oracle.com> x86/smpboot: Make optimization of delay calibration work correctly Alexander Shishkin <alexander.shishkin(a)linux.intel.com> x86/debug: Handle warnings before the notifier chain, to fix KGDB crash Richard Schütz <rschuetz(a)uni-koblenz.de> can: c_can: don't indicate triple sampling support for D_CAN Marek Vasut <marex(a)denx.de> can: ifi: Fix transmitter delay calculation Stephane Grosjean <s.grosjean(a)peak-system.com> can: peak: Add support for new PCIe/M2 CAN FD interfaces Gerhard Bertelsmann <info(a)gerhard-bertelsmann.de> can: sun4i: handle overrun in RX FIFO Linus Torvalds <torvalds(a)linux-foundation.org> Revert "x86: CPU: Fix up "cpu MHz" in /proc/cpuinfo" Sinclair Yeh <syeh(a)vmware.com> drm/vmwgfx: Fix Ubuntu 17.10 Wayland black screen issue Ilya Dryomov <idryomov(a)gmail.com> rbd: use GFP_NOIO for parent stat and data requests Kai-Heng Feng <kai.heng.feng(a)canonical.com> Input: elan_i2c - add ELAN060C to the ACPI table Paul Mackerras <paulus(a)ozlabs.org> KVM: PPC: Book3S HV: Fix exclusion between HPT resizing and other HPT updates Oswald Buddenhagen <oswald.buddenhagen(a)gmx.de> MIPS: AR7: Ensure that serial ports are properly set up Jonas Gorski <jonas.gorski(a)gmail.com> MIPS: AR7: Defer registration of GPIO Jaedon Shin <jaedon.shin(a)gmail.com> MIPS: BMIPS: Fix missing cbr address Paul Burton <paul.burton(a)mips.com> MIPS: Fix CM region target definitions Takashi Iwai <tiwai(a)suse.de> ALSA: seq: Avoid invalid lockdep class warning Takashi Iwai <tiwai(a)suse.de> ALSA: seq: Fix OSS sysex delivery in OSS emulation Hui Wang <hui.wang(a)canonical.com> ALSA: hda - fix headset mic problem for Dell machines with alc274 Jussi Laako <jussi(a)sonarnerd.net> ALSA: usb-audio: support new Amanero Combo384 firmware version Takashi Iwai <tiwai(a)suse.de> ALSA: timer: Limit max instances per timer Mark Rutland <mark.rutland(a)arm.com> ARM: 8720/1: ensure dump_instr() checks addr_limit Rafael J. Wysocki <rafael.j.wysocki(a)intel.com> ACPI / scan: Enable GPEs before scanning the namespace Rafael J. Wysocki <rafael.j.wysocki(a)intel.com> ACPICA: Make it possible to enable runtime GPEs earlier Rafael J. Wysocki <rafael.j.wysocki(a)intel.com> ACPICA: Dispatch active GPEs at init time Rafael J. Wysocki <rafael.j.wysocki(a)intel.com> ACPI / PM: Blacklist Low Power S0 Idle _DSM for Dell XPS13 9360 Eric Biggers <ebiggers(a)google.com> KEYS: fix NULL pointer dereference during ASN.1 parsing [ver #2] Andrey Ryabinin <aryabinin(a)virtuozzo.com> crypto: x86/sha256-mb - fix panic due to unaligned access Andrey Ryabinin <aryabinin(a)virtuozzo.com> crypto: x86/sha1-mb - fix panic due to unaligned access Romain Izard <romain.izard.pro(a)gmail.com> crypto: ccm - preserve the IV buffer Li Bin <huawei.libin(a)huawei.com> workqueue: Fix NULL pointer dereference Anatole Denis <anatole(a)rezel.net> netfilter: nft_set_hash: disable fast_ops for 2-len keys Florian Westphal <fw(a)strlen.de> netfilter: nat: Revert "netfilter: nat: convert nat bysrc hash to rhashtable" ------------- Diffstat: Makefile | 4 +- arch/arm/kernel/traps.c | 28 +++-- arch/mips/ar7/platform.c | 5 + arch/mips/ar7/prom.c | 2 - arch/mips/include/asm/mips-cm.h | 4 +- arch/mips/kernel/smp-bmips.c | 4 +- arch/powerpc/kvm/book3s_64_mmu_hv.c | 10 ++ arch/powerpc/kvm/book3s_hv.c | 29 +++-- arch/x86/crypto/sha1-mb/sha1_mb_mgr_flush_avx2.S | 12 +- .../crypto/sha256-mb/sha256_mb_mgr_flush_avx2.S | 12 +- arch/x86/kernel/cpu/Makefile | 2 +- arch/x86/kernel/cpu/aperfmperf.c | 11 +- arch/x86/kernel/cpu/proc.c | 4 +- arch/x86/kernel/smpboot.c | 11 +- arch/x86/kernel/traps.c | 10 +- arch/x86/kernel/tsc.c | 8 +- arch/x86/oprofile/op_model_ppro.c | 4 +- crypto/ccm.c | 4 +- drivers/acpi/acpica/evgpeblk.c | 30 +++-- drivers/acpi/acpica/evxfgpe.c | 8 ++ drivers/acpi/scan.c | 6 +- drivers/acpi/sleep.c | 28 +++++ drivers/block/rbd.c | 4 +- drivers/gpu/drm/vmwgfx/vmwgfx_drv.c | 2 +- drivers/input/mouse/elan_i2c_core.c | 1 + drivers/net/can/c_can/c_can_pci.c | 1 - drivers/net/can/c_can/c_can_platform.c | 1 - drivers/net/can/ifi_canfd/ifi_canfd.c | 6 +- drivers/net/can/peak_canfd/peak_pciefd_main.c | 14 ++- drivers/net/can/sun4i_can.c | 12 +- include/acpi/actypes.h | 3 +- include/net/netfilter/nf_conntrack.h | 3 +- include/net/netfilter/nf_nat.h | 1 - include/sound/seq_kernel.h | 3 +- include/sound/timer.h | 2 + kernel/workqueue_internal.h | 3 +- lib/asn1_decoder.c | 4 +- net/netfilter/nf_nat_core.c | 130 +++++++++------------ net/netfilter/nft_set_hash.c | 1 - sound/core/hrtimer.c | 1 + sound/core/seq/oss/seq_oss_midi.c | 4 +- sound/core/seq/oss/seq_oss_readq.c | 29 +++++ sound/core/seq/oss/seq_oss_readq.h | 2 + sound/core/timer.c | 67 ++++++++--- sound/pci/hda/patch_realtek.c | 5 + sound/usb/quirks.c | 1 + 46 files changed, 343 insertions(+), 193 deletions(-)

7 years, 11 months

3
34
0 0

Re: [Linux-stable-mirror] Patch "ASoC: sunxi: Add bindings for sun8i to SPDIF" has been added to the 4.9-stable tree

by alexander.levin＠verizon.com

On Fri, Nov 10, 2017 at 04:44:00PM +0000, Mark Brown wrote: >On Fri, Nov 10, 2017 at 05:36:32PM +0100, gregkh(a)linuxfoundation.org wrote: >> On Fri, Nov 10, 2017 at 04:04:22PM +0000, alexander.levin(a)verizon.com wrote: > >> > - 96e53c41e1f81c9e9d1ce38d3f28b95668b71dcf - just dead code removal, >> > avoids conflicts later. > >> This commit claims the hardware is now supported by a different driver. >> Is that support in 4.9? I couldn't figure it out :( >From what I can tell its that way since 3.11. >I suspect this isn't worth the effort - it's defintely more than a >simple quirk anyway. But as Mark points out, this is getting a bit too complicated and risky. -- Thanks, Sasha

7 years, 11 months

2
1
0 0

Re: [Linux-stable-mirror] Request for stable 4.13.x inclusion: netfilter: nft_set_hash: disable fast_ops for 2-len keys

by Pablo Neira Ayuso

On Fri, Nov 10, 2017 at 12:56:46PM +0100, Thomas Deutschmann wrote: > Hi, > > please consider to add > > > From 0414c78f14861cb704d6e6888efd53dd36e3bdde Mon Sep 17 00:00:00 2001 [...] > This commit fixes a problem in 4.13+ with latest >=nftables-0.8 release. > > Bug: https://bugs.debian.org/cgi-bin/bugreport.cgi?bug=880145 > Bug: https://bugs.gentoo.org/636968 Already flying into -stable 4.13. https://marc.info/?l=netfilter-devel&m=151031414718199&w=2 Thanks.

7 years, 11 months

1
0
0 0

[Linux-stable-mirror] v3.2.95 build: 4 failures 20 warnings (v3.2.95)

by Build bot for Mark Brown

Tree/Branch: v3.2.95 Git describe: v3.2.95 Commit: 8518814021 Linux 3.2.95 Build Time: 0 min 3 sec Passed: 0 / 4 ( 0.00 %) Failed: 4 / 4 (100.00 %) Errors: 6 Warnings: 20 Section Mismatches: 0 Failed defconfigs: x86_64-allnoconfig arm-allmodconfig arm-allnoconfig x86_64-defconfig Errors: x86_64-allnoconfig /home/broonie/build/linux-stable/scripts/mod/empty.c:1:0: error: code model kernel does not support PIC mode /home/broonie/build/linux-stable/kernel/bounds.c:1:0: error: code model kernel does not support PIC mode arm-allnoconfig /home/broonie/build/linux-stable/arch/arm/include/asm/div64.h:77:7: error: '__LINUX_ARM_ARCH__' undeclared (first use in this function) /home/broonie/build/linux-stable/arch/arm/include/asm/glue-cache.h:129:2: error: #error Unknown cache maintenance model /home/broonie/build/linux-stable/arch/arm/include/asm/glue-df.h:107:2: error: #error Unknown data abort handler type /home/broonie/build/linux-stable/arch/arm/include/asm/glue-pf.h:54:2: error: #error Unknown prefetch abort handler type x86_64-defconfig /home/broonie/build/linux-stable/scripts/mod/empty.c:1:0: error: code model kernel does not support PIC mode /home/broonie/build/linux-stable/kernel/bounds.c:1:0: error: code model kernel does not support PIC mode ------------------------------------------------------------------------------- defconfigs with issues (other than build errors): 2 warnings 0 mismatches : arm-allmodconfig 19 warnings 0 mismatches : arm-allnoconfig ------------------------------------------------------------------------------- Errors summary: 6 2 /home/broonie/build/linux-stable/scripts/mod/empty.c:1:0: error: code model kernel does not support PIC mode 2 /home/broonie/build/linux-stable/kernel/bounds.c:1:0: error: code model kernel does not support PIC mode 1 /home/broonie/build/linux-stable/arch/arm/include/asm/glue-pf.h:54:2: error: #error Unknown prefetch abort handler type 1 /home/broonie/build/linux-stable/arch/arm/include/asm/glue-df.h:107:2: error: #error Unknown data abort handler type 1 /home/broonie/build/linux-stable/arch/arm/include/asm/glue-cache.h:129:2: error: #error Unknown cache maintenance model 1 /home/broonie/build/linux-stable/arch/arm/include/asm/div64.h:77:7: error: '__LINUX_ARM_ARCH__' undeclared (first use in this function) Warnings Summary: 20 2 .config:27:warning: symbol value '' invalid for PHYS_OFFSET 1 /home/broonie/build/linux-stable/arch/arm/include/asm/system.h:342:5: warning: "__LINUX_ARM_ARCH__" is not defined [-Wundef] 1 /home/broonie/build/linux-stable/arch/arm/include/asm/system.h:272:5: warning: "__LINUX_ARM_ARCH__" is not defined [-Wundef] 1 /home/broonie/build/linux-stable/arch/arm/include/asm/system.h:265:5: warning: "__LINUX_ARM_ARCH__" is not defined [-Wundef] 1 /home/broonie/build/linux-stable/arch/arm/include/asm/system.h:131:35: warning: "__LINUX_ARM_ARCH__" is not defined [-Wundef] 1 /home/broonie/build/linux-stable/arch/arm/include/asm/system.h:127:5: warning: "__LINUX_ARM_ARCH__" is not defined [-Wundef] 1 /home/broonie/build/linux-stable/arch/arm/include/asm/system.h:121:3: warning: "__LINUX_ARM_ARCH__" is not defined [-Wundef] 1 /home/broonie/build/linux-stable/arch/arm/include/asm/system.h:120:5: warning: "__LINUX_ARM_ARCH__" is not defined [-Wundef] 1 /home/broonie/build/linux-stable/arch/arm/include/asm/system.h:114:5: warning: "__LINUX_ARM_ARCH__" is not defined [-Wundef] 1 /home/broonie/build/linux-stable/arch/arm/include/asm/swab.h:25:28: warning: "__LINUX_ARM_ARCH__" is not defined [-Wundef] 1 /home/broonie/build/linux-stable/arch/arm/include/asm/processor.h:82:5: warning: "__LINUX_ARM_ARCH__" is not defined [-Wundef] 1 /home/broonie/build/linux-stable/arch/arm/include/asm/processor.h:102:5: warning: "__LINUX_ARM_ARCH__" is not defined [-Wundef] 1 /home/broonie/build/linux-stable/arch/arm/include/asm/irqflags.h:11:5: warning: "__LINUX_ARM_ARCH__" is not defined [-Wundef] 1 /home/broonie/build/linux-stable/arch/arm/include/asm/fpstate.h:32:5: warning: "__LINUX_ARM_ARCH__" is not defined [-Wundef] 1 /home/broonie/build/linux-stable/arch/arm/include/asm/cachetype.h:33:7: warning: "__LINUX_ARM_ARCH__" is not defined [-Wundef] 1 /home/broonie/build/linux-stable/arch/arm/include/asm/cachetype.h:28:5: warning: "__LINUX_ARM_ARCH__" is not defined [-Wundef] 1 /home/broonie/build/linux-stable/arch/arm/include/asm/cacheflush.h:196:7: warning: "__LINUX_ARM_ARCH__" is not defined [-Wundef] 1 /home/broonie/build/linux-stable/arch/arm/include/asm/cacheflush.h:194:7: warning: "__LINUX_ARM_ARCH__" is not defined [-Wundef] 1 /home/broonie/build/linux-stable/arch/arm/include/asm/bitops.h:217:5: warning: "__LINUX_ARM_ARCH__" is not defined [-Wundef] 1 /home/broonie/build/linux-stable/arch/arm/include/asm/atomic.h:30:5: warning: "__LINUX_ARM_ARCH__" is not defined [-Wundef] =============================================================================== Detailed per-defconfig build reports below: ------------------------------------------------------------------------------- x86_64-allnoconfig : FAIL, 2 errors, 0 warnings, 0 section mismatches Errors: /home/broonie/build/linux-stable/scripts/mod/empty.c:1:0: error: code model kernel does not support PIC mode /home/broonie/build/linux-stable/kernel/bounds.c:1:0: error: code model kernel does not support PIC mode ------------------------------------------------------------------------------- arm-allmodconfig : FAIL, 0 errors, 2 warnings, 0 section mismatches Warnings: .config:27:warning: symbol value '' invalid for PHYS_OFFSET .config:27:warning: symbol value '' invalid for PHYS_OFFSET ------------------------------------------------------------------------------- arm-allnoconfig : FAIL, 4 errors, 19 warnings, 0 section mismatches Errors: /home/broonie/build/linux-stable/arch/arm/include/asm/div64.h:77:7: error: '__LINUX_ARM_ARCH__' undeclared (first use in this function) /home/broonie/build/linux-stable/arch/arm/include/asm/glue-cache.h:129:2: error: #error Unknown cache maintenance model /home/broonie/build/linux-stable/arch/arm/include/asm/glue-df.h:107:2: error: #error Unknown data abort handler type /home/broonie/build/linux-stable/arch/arm/include/asm/glue-pf.h:54:2: error: #error Unknown prefetch abort handler type Warnings: /home/broonie/build/linux-stable/arch/arm/include/asm/irqflags.h:11:5: warning: "__LINUX_ARM_ARCH__" is not defined [-Wundef] /home/broonie/build/linux-stable/arch/arm/include/asm/system.h:114:5: warning: "__LINUX_ARM_ARCH__" is not defined [-Wundef] /home/broonie/build/linux-stable/arch/arm/include/asm/system.h:120:5: warning: "__LINUX_ARM_ARCH__" is not defined [-Wundef] /home/broonie/build/linux-stable/arch/arm/include/asm/system.h:121:3: warning: "__LINUX_ARM_ARCH__" is not defined [-Wundef] /home/broonie/build/linux-stable/arch/arm/include/asm/system.h:127:5: warning: "__LINUX_ARM_ARCH__" is not defined [-Wundef] /home/broonie/build/linux-stable/arch/arm/include/asm/system.h:131:35: warning: "__LINUX_ARM_ARCH__" is not defined [-Wundef] /home/broonie/build/linux-stable/arch/arm/include/asm/system.h:265:5: warning: "__LINUX_ARM_ARCH__" is not defined [-Wundef] /home/broonie/build/linux-stable/arch/arm/include/asm/system.h:272:5: warning: "__LINUX_ARM_ARCH__" is not defined [-Wundef] /home/broonie/build/linux-stable/arch/arm/include/asm/system.h:342:5: warning: "__LINUX_ARM_ARCH__" is not defined [-Wundef] /home/broonie/build/linux-stable/arch/arm/include/asm/bitops.h:217:5: warning: "__LINUX_ARM_ARCH__" is not defined [-Wundef] /home/broonie/build/linux-stable/arch/arm/include/asm/swab.h:25:28: warning: "__LINUX_ARM_ARCH__" is not defined [-Wundef] /home/broonie/build/linux-stable/arch/arm/include/asm/fpstate.h:32:5: warning: "__LINUX_ARM_ARCH__" is not defined [-Wundef] /home/broonie/build/linux-stable/arch/arm/include/asm/processor.h:82:5: warning: "__LINUX_ARM_ARCH__" is not defined [-Wundef] /home/broonie/build/linux-stable/arch/arm/include/asm/processor.h:102:5: warning: "__LINUX_ARM_ARCH__" is not defined [-Wundef] /home/broonie/build/linux-stable/arch/arm/include/asm/atomic.h:30:5: warning: "__LINUX_ARM_ARCH__" is not defined [-Wundef] /home/broonie/build/linux-stable/arch/arm/include/asm/cachetype.h:28:5: warning: "__LINUX_ARM_ARCH__" is not defined [-Wundef] /home/broonie/build/linux-stable/arch/arm/include/asm/cachetype.h:33:7: warning: "__LINUX_ARM_ARCH__" is not defined [-Wundef] /home/broonie/build/linux-stable/arch/arm/include/asm/cacheflush.h:194:7: warning: "__LINUX_ARM_ARCH__" is not defined [-Wundef] /home/broonie/build/linux-stable/arch/arm/include/asm/cacheflush.h:196:7: warning: "__LINUX_ARM_ARCH__" is not defined [-Wundef] ------------------------------------------------------------------------------- x86_64-defconfig : FAIL, 2 errors, 0 warnings, 0 section mismatches Errors: /home/broonie/build/linux-stable/scripts/mod/empty.c:1:0: error: code model kernel does not support PIC mode /home/broonie/build/linux-stable/kernel/bounds.c:1:0: error: code model kernel does not support PIC mode ------------------------------------------------------------------------------- Passed with no errors, warnings or mismatches:

7 years, 11 months

1
0
0 0

[Linux-stable-mirror] v3.16.50 build: 0 failures 7 warnings (v3.16.50)

by Build bot for Mark Brown

Tree/Branch: v3.16.50 Git describe: v3.16.50 Commit: 2447a018c3 Linux 3.16.50 Build Time: 31 min 1 sec Passed: 9 / 9 (100.00 %) Failed: 0 / 9 ( 0.00 %) Errors: 0 Warnings: 7 Section Mismatches: 0 ------------------------------------------------------------------------------- defconfigs with issues (other than build errors): 1 warnings 0 mismatches : arm64-allnoconfig 2 warnings 0 mismatches : arm64-allmodconfig 1 warnings 0 mismatches : arm-multi_v5_defconfig 1 warnings 0 mismatches : arm-multi_v7_defconfig 1 warnings 0 mismatches : x86_64-defconfig 4 warnings 0 mismatches : arm-allmodconfig 1 warnings 0 mismatches : arm-allnoconfig 1 warnings 0 mismatches : x86_64-allnoconfig 3 warnings 0 mismatches : arm64-defconfig ------------------------------------------------------------------------------- Warnings Summary: 7 7 ../include/linux/stddef.h:8:14: warning: 'return' with a value, in function returning void 2 ../ipc/sem.c:377:6: warning: '___p1' may be used uninitialized in this function [-Wmaybe-uninitialized] 2 ../drivers/net/ethernet/broadcom/genet/bcmgenet.c:1346:17: warning: unused variable 'kdev' [-Wunused-variable] 1 ../drivers/platform/x86/eeepc-laptop.c:279:10: warning: 'value' may be used uninitialized in this function [-Wmaybe-uninitialized] 1 ../drivers/media/platform/davinci/vpfe_capture.c:291:12: warning: 'vpfe_get_ccdc_image_format' defined but not used [-Wunused-function] 1 ../drivers/media/platform/davinci/vpfe_capture.c:1718:1: warning: label 'unlock_out' defined but not used [-Wunused-label] 1 ../arch/x86/kernel/cpu/common.c:961:13: warning: 'syscall32_cpu_init' defined but not used [-Wunused-function] =============================================================================== Detailed per-defconfig build reports below: ------------------------------------------------------------------------------- arm64-allnoconfig : PASS, 0 errors, 1 warnings, 0 section mismatches Warnings: ../include/linux/stddef.h:8:14: warning: 'return' with a value, in function returning void ------------------------------------------------------------------------------- arm64-allmodconfig : PASS, 0 errors, 2 warnings, 0 section mismatches Warnings: ../include/linux/stddef.h:8:14: warning: 'return' with a value, in function returning void ../drivers/net/ethernet/broadcom/genet/bcmgenet.c:1346:17: warning: unused variable 'kdev' [-Wunused-variable] ------------------------------------------------------------------------------- arm-multi_v5_defconfig : PASS, 0 errors, 1 warnings, 0 section mismatches Warnings: ../include/linux/stddef.h:8:14: warning: 'return' with a value, in function returning void ------------------------------------------------------------------------------- arm-multi_v7_defconfig : PASS, 0 errors, 1 warnings, 0 section mismatches Warnings: ../include/linux/stddef.h:8:14: warning: 'return' with a value, in function returning void ------------------------------------------------------------------------------- x86_64-defconfig : PASS, 0 errors, 1 warnings, 0 section mismatches Warnings: ../drivers/platform/x86/eeepc-laptop.c:279:10: warning: 'value' may be used uninitialized in this function [-Wmaybe-uninitialized] ------------------------------------------------------------------------------- arm-allmodconfig : PASS, 0 errors, 4 warnings, 0 section mismatches Warnings: ../include/linux/stddef.h:8:14: warning: 'return' with a value, in function returning void ../drivers/media/platform/davinci/vpfe_capture.c:1718:1: warning: label 'unlock_out' defined but not used [-Wunused-label] ../drivers/media/platform/davinci/vpfe_capture.c:291:12: warning: 'vpfe_get_ccdc_image_format' defined but not used [-Wunused-function] ../drivers/net/ethernet/broadcom/genet/bcmgenet.c:1346:17: warning: unused variable 'kdev' [-Wunused-variable] ------------------------------------------------------------------------------- arm-allnoconfig : PASS, 0 errors, 1 warnings, 0 section mismatches Warnings: ../include/linux/stddef.h:8:14: warning: 'return' with a value, in function returning void ------------------------------------------------------------------------------- x86_64-allnoconfig : PASS, 0 errors, 1 warnings, 0 section mismatches Warnings: ../arch/x86/kernel/cpu/common.c:961:13: warning: 'syscall32_cpu_init' defined but not used [-Wunused-function] ------------------------------------------------------------------------------- arm64-defconfig : PASS, 0 errors, 3 warnings, 0 section mismatches Warnings: ../ipc/sem.c:377:6: warning: '___p1' may be used uninitialized in this function [-Wmaybe-uninitialized] ../ipc/sem.c:377:6: warning: '___p1' may be used uninitialized in this function [-Wmaybe-uninitialized] ../include/linux/stddef.h:8:14: warning: 'return' with a value, in function returning void ------------------------------------------------------------------------------- Passed with no errors, warnings or mismatches:

7 years, 11 months

1
0
0 0

Re: [Linux-stable-mirror] [PATCH 2/3] Input: twl6040-vibra: fix child-node lookup

by Johan Hovold

On Mon, Nov 13, 2017 at 08:30:53AM +0100, H. Nikolaus Schaller wrote: > Hi Johan, > > > Am 11.11.2017 um 16:43 schrieb Johan Hovold <johan(a)kernel.org>: > > > > Fix child-node lookup during probe, which ended up searching the whole > > device tree depth-first starting at parent rather than just matching on > > its children. > > > > Later sanity checks on node properties (which would likely be missing) > > should prevent this from causing much trouble however, especially as the > > original premature free of the parent node has already been fixed > > separately (but that "fix" was apparently never backported to stable). > > > > Fixes: e7ec014a47e4 ("Input: twl6040-vibra - update for device tree support") > > Fixes: c52c545ead97 ("Input: twl6040-vibra - fix DT node memory management") > > Cc: stable <stable(a)vger.kernel.org> # 3.6 > > Cc: Peter Ujfalusi <peter.ujfalusi(a)ti.com> > > Cc: H. Nikolaus Schaller <hns(a)goldelico.com> > > Signed-off-by: Johan Hovold <johan(a)kernel.org> > > Tested-By: H. Nikolaus Schaller <hns(a)goldelico.com> (on Pyra OMAP5 hardware) > > I also tested your twl4030-vibra patch on GTA04. > > No regressions observed. Thanks for testing. Johan

7 years, 11 months

1
0
0 0

[Linux-stable-mirror] Patch "x86/smpboot: Make optimization of delay calibration work correctly" has been added to the 4.9-stable tree

by gregkh＠linuxfoundation.org

This is a note to let you know that I've just added the patch titled x86/smpboot: Make optimization of delay calibration work correctly to the 4.9-stable tree which can be found at: http://www.kernel.org/git/?p=linux/kernel/git/stable/stable-queue.git;a=sum… The filename of the patch is: x86-smpboot-make-optimization-of-delay-calibration-work-correctly.patch and it can be found in the queue-4.9 subdirectory. If you, or anyone else, feels it should not be added to the stable tree, please let <stable(a)vger.kernel.org> know about it. >From 76ce7cfe35ef58f34e6ba85327afb5fbf6c3ff9b Mon Sep 17 00:00:00 2001 From: Pavel Tatashin <pasha.tatashin(a)oracle.com> Date: Fri, 27 Oct 2017 20:11:00 -0400 Subject: x86/smpboot: Make optimization of delay calibration work correctly From: Pavel Tatashin <pasha.tatashin(a)oracle.com> commit 76ce7cfe35ef58f34e6ba85327afb5fbf6c3ff9b upstream. If the TSC has constant frequency then the delay calibration can be skipped when it has been calibrated for a package already. This is checked in calibrate_delay_is_known(), but that function is buggy in two aspects: It returns 'false' if (!tsc_disabled && !cpu_has(&cpu_data(cpu), X86_FEATURE_CONSTANT_TSC) which is obviously the reverse of the intended check and the check for the sibling mask cannot work either because the topology links have not been set up yet. Correct the condition and move the call to set_cpu_sibling_map() before invoking calibrate_delay() so the sibling check works correctly. [ tglx: Rewrote changelong ] Fixes: c25323c07345 ("x86/tsc: Use topology functions") Signed-off-by: Pavel Tatashin <pasha.tatashin(a)oracle.com> Signed-off-by: Thomas Gleixner <tglx(a)linutronix.de> Cc: peterz(a)infradead.org Cc: bob.picco(a)oracle.com Cc: steven.sistare(a)oracle.com Cc: daniel.m.jordan(a)oracle.com Link: https://lkml.kernel.org/r/20171028001100.26603-1-pasha.tatashin@oracle.com Signed-off-by: Greg Kroah-Hartman <gregkh(a)linuxfoundation.org> --- arch/x86/kernel/smpboot.c | 11 ++++++----- arch/x86/kernel/tsc.c | 8 +++----- 2 files changed, 9 insertions(+), 10 deletions(-) --- a/arch/x86/kernel/smpboot.c +++ b/arch/x86/kernel/smpboot.c @@ -181,6 +181,12 @@ static void smp_callin(void) smp_store_cpu_info(cpuid); /* + * The topology information must be up to date before + * calibrate_delay() and notify_cpu_starting(). + */ + set_cpu_sibling_map(raw_smp_processor_id()); + + /* * Get our bogomips. * Update loops_per_jiffy in cpu_data. Previous call to * smp_store_cpu_info() stored a value that is close but not as @@ -190,11 +196,6 @@ static void smp_callin(void) cpu_data(cpuid).loops_per_jiffy = loops_per_jiffy; pr_debug("Stack at about %p\n", &cpuid); - /* - * This must be done before setting cpu_online_mask - * or calling notify_cpu_starting. - */ - set_cpu_sibling_map(raw_smp_processor_id()); wmb(); notify_cpu_starting(cpuid); --- a/arch/x86/kernel/tsc.c +++ b/arch/x86/kernel/tsc.c @@ -1382,12 +1382,10 @@ void __init tsc_init(void) unsigned long calibrate_delay_is_known(void) { int sibling, cpu = smp_processor_id(); - struct cpumask *mask = topology_core_cpumask(cpu); + int constant_tsc = cpu_has(&cpu_data(cpu), X86_FEATURE_CONSTANT_TSC); + const struct cpumask *mask = topology_core_cpumask(cpu); - if (!tsc_disabled && !cpu_has(&cpu_data(cpu), X86_FEATURE_CONSTANT_TSC)) - return 0; - - if (!mask) + if (tsc_disabled || !constant_tsc || !mask) return 0; sibling = cpumask_any_but(mask, cpu); Patches currently in stable-queue which might be from pasha.tatashin(a)oracle.com are queue-4.9/x86-smpboot-make-optimization-of-delay-calibration-work-correctly.patch

7 years, 11 months

1
0
0 0

[Linux-stable-mirror] Patch "x86/oprofile/ppro: Do not use __this_cpu*() in preemptible context" has been added to the 4.9-stable tree

by gregkh＠linuxfoundation.org

This is a note to let you know that I've just added the patch titled x86/oprofile/ppro: Do not use __this_cpu*() in preemptible context to the 4.9-stable tree which can be found at: http://www.kernel.org/git/?p=linux/kernel/git/stable/stable-queue.git;a=sum… The filename of the patch is: x86-oprofile-ppro-do-not-use-__this_cpu-in-preemptible-context.patch and it can be found in the queue-4.9 subdirectory. If you, or anyone else, feels it should not be added to the stable tree, please let <stable(a)vger.kernel.org> know about it. >From a743bbeef27b9176987ec0cb7f906ab0ab52d1da Mon Sep 17 00:00:00 2001 From: Borislav Petkov <bp(a)suse.de> Date: Tue, 7 Nov 2017 18:53:07 +0100 Subject: x86/oprofile/ppro: Do not use __this_cpu*() in preemptible context From: Borislav Petkov <bp(a)suse.de> commit a743bbeef27b9176987ec0cb7f906ab0ab52d1da upstream. The warning below says it all: BUG: using __this_cpu_read() in preemptible [00000000] code: swapper/0/1 caller is __this_cpu_preempt_check CPU: 0 PID: 1 Comm: swapper/0 Not tainted 4.14.0-rc8 #4 Call Trace: dump_stack check_preemption_disabled ? do_early_param __this_cpu_preempt_check arch_perfmon_init op_nmi_init ? alloc_pci_root_info oprofile_arch_init oprofile_init do_one_initcall ... These accessors should not have been used in the first place: it is PPro so no mixed silicon revisions and thus it can simply use boot_cpu_data. Reported-by: Fengguang Wu <fengguang.wu(a)intel.com> Tested-by: Fengguang Wu <fengguang.wu(a)intel.com> Fix-creation-mandated-by: Linus Torvalds <torvalds(a)linux-foundation.org> Signed-off-by: Borislav Petkov <bp(a)suse.de> Signed-off-by: Thomas Gleixner <tglx(a)linutronix.de> Cc: Robert Richter <rric(a)kernel.org> Cc: x86(a)kernel.org Signed-off-by: Greg Kroah-Hartman <gregkh(a)linuxfoundation.org> --- arch/x86/oprofile/op_model_ppro.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) --- a/arch/x86/oprofile/op_model_ppro.c +++ b/arch/x86/oprofile/op_model_ppro.c @@ -212,8 +212,8 @@ static void arch_perfmon_setup_counters( eax.full = cpuid_eax(0xa); /* Workaround for BIOS bugs in 6/15. Taken from perfmon2 */ - if (eax.split.version_id == 0 && __this_cpu_read(cpu_info.x86) == 6 && - __this_cpu_read(cpu_info.x86_model) == 15) { + if (eax.split.version_id == 0 && boot_cpu_data.x86 == 6 && + boot_cpu_data.x86_model == 15) { eax.split.version_id = 2; eax.split.num_counters = 2; eax.split.bit_width = 40; Patches currently in stable-queue which might be from bp(a)suse.de are queue-4.9/edac-amd64-add-x86cpuid-sanity-check-during-init.patch queue-4.9/edac-amd64-save-and-return-err-code-from-probe_one_instance.patch queue-4.9/x86-oprofile-ppro-do-not-use-__this_cpu-in-preemptible-context.patch

7 years, 11 months

1
0
0 0

[Linux-stable-mirror] Patch "x86/oprofile/ppro: Do not use __this_cpu*() in preemptible context" has been added to the 4.4-stable tree

by gregkh＠linuxfoundation.org

This is a note to let you know that I've just added the patch titled x86/oprofile/ppro: Do not use __this_cpu*() in preemptible context to the 4.4-stable tree which can be found at: http://www.kernel.org/git/?p=linux/kernel/git/stable/stable-queue.git;a=sum… The filename of the patch is: x86-oprofile-ppro-do-not-use-__this_cpu-in-preemptible-context.patch and it can be found in the queue-4.4 subdirectory. If you, or anyone else, feels it should not be added to the stable tree, please let <stable(a)vger.kernel.org> know about it. >From a743bbeef27b9176987ec0cb7f906ab0ab52d1da Mon Sep 17 00:00:00 2001 From: Borislav Petkov <bp(a)suse.de> Date: Tue, 7 Nov 2017 18:53:07 +0100 Subject: x86/oprofile/ppro: Do not use __this_cpu*() in preemptible context From: Borislav Petkov <bp(a)suse.de> commit a743bbeef27b9176987ec0cb7f906ab0ab52d1da upstream. The warning below says it all: BUG: using __this_cpu_read() in preemptible [00000000] code: swapper/0/1 caller is __this_cpu_preempt_check CPU: 0 PID: 1 Comm: swapper/0 Not tainted 4.14.0-rc8 #4 Call Trace: dump_stack check_preemption_disabled ? do_early_param __this_cpu_preempt_check arch_perfmon_init op_nmi_init ? alloc_pci_root_info oprofile_arch_init oprofile_init do_one_initcall ... These accessors should not have been used in the first place: it is PPro so no mixed silicon revisions and thus it can simply use boot_cpu_data. Reported-by: Fengguang Wu <fengguang.wu(a)intel.com> Tested-by: Fengguang Wu <fengguang.wu(a)intel.com> Fix-creation-mandated-by: Linus Torvalds <torvalds(a)linux-foundation.org> Signed-off-by: Borislav Petkov <bp(a)suse.de> Signed-off-by: Thomas Gleixner <tglx(a)linutronix.de> Cc: Robert Richter <rric(a)kernel.org> Cc: x86(a)kernel.org Signed-off-by: Greg Kroah-Hartman <gregkh(a)linuxfoundation.org> --- arch/x86/oprofile/op_model_ppro.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) --- a/arch/x86/oprofile/op_model_ppro.c +++ b/arch/x86/oprofile/op_model_ppro.c @@ -212,8 +212,8 @@ static void arch_perfmon_setup_counters( eax.full = cpuid_eax(0xa); /* Workaround for BIOS bugs in 6/15. Taken from perfmon2 */ - if (eax.split.version_id == 0 && __this_cpu_read(cpu_info.x86) == 6 && - __this_cpu_read(cpu_info.x86_model) == 15) { + if (eax.split.version_id == 0 && boot_cpu_data.x86 == 6 && + boot_cpu_data.x86_model == 15) { eax.split.version_id = 2; eax.split.num_counters = 2; eax.split.bit_width = 40; Patches currently in stable-queue which might be from bp(a)suse.de are queue-4.4/x86-oprofile-ppro-do-not-use-__this_cpu-in-preemptible-context.patch

7 years, 11 months

1
0
0 0

[Linux-stable-mirror] Patch "PKCS#7: fix unitialized boolean 'want'" has been added to the 4.4-stable tree

by gregkh＠linuxfoundation.org

This is a note to let you know that I've just added the patch titled PKCS#7: fix unitialized boolean 'want' to the 4.4-stable tree which can be found at: http://www.kernel.org/git/?p=linux/kernel/git/stable/stable-queue.git;a=sum… The filename of the patch is: pkcs-7-fix-unitialized-boolean-want.patch and it can be found in the queue-4.4 subdirectory. If you, or anyone else, feels it should not be added to the stable tree, please let <stable(a)vger.kernel.org> know about it. >From 06aae592425701851e02bb850cb9f4997f0ae163 Mon Sep 17 00:00:00 2001 From: Colin Ian King <colin.king(a)canonical.com> Date: Sat, 27 Feb 2016 12:45:26 +0000 Subject: PKCS#7: fix unitialized boolean 'want' From: Colin Ian King <colin.king(a)canonical.com> commit 06aae592425701851e02bb850cb9f4997f0ae163 upstream. The boolean want is not initialized and hence garbage. The default should be false (later it is only set to true on tne sinfo->authattrs check). Found with static analysis using CoverityScan Signed-off-by: Colin Ian King <colin.king(a)canonical.com> Signed-off-by: David Howells <dhowells(a)redhat.com> Cc: Ben Hutchings <ben.hutchings(a)codethink.co.uk> Signed-off-by: Greg Kroah-Hartman <gregkh(a)linuxfoundation.org> --- crypto/asymmetric_keys/pkcs7_parser.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) --- a/crypto/asymmetric_keys/pkcs7_parser.c +++ b/crypto/asymmetric_keys/pkcs7_parser.c @@ -87,7 +87,7 @@ EXPORT_SYMBOL_GPL(pkcs7_free_message); static int pkcs7_check_authattrs(struct pkcs7_message *msg) { struct pkcs7_signed_info *sinfo; - bool want; + bool want = false; sinfo = msg->signed_infos; if (!sinfo) Patches currently in stable-queue which might be from colin.king(a)canonical.com are queue-4.4/pkcs-7-fix-unitialized-boolean-want.patch

7 years, 11 months

1
0
0 0

[Linux-stable-mirror] Patch "x86/smpboot: Make optimization of delay calibration work correctly" has been added to the 4.13-stable tree

by gregkh＠linuxfoundation.org

This is a note to let you know that I've just added the patch titled x86/smpboot: Make optimization of delay calibration work correctly to the 4.13-stable tree which can be found at: http://www.kernel.org/git/?p=linux/kernel/git/stable/stable-queue.git;a=sum… The filename of the patch is: x86-smpboot-make-optimization-of-delay-calibration-work-correctly.patch and it can be found in the queue-4.13 subdirectory. If you, or anyone else, feels it should not be added to the stable tree, please let <stable(a)vger.kernel.org> know about it. >From 76ce7cfe35ef58f34e6ba85327afb5fbf6c3ff9b Mon Sep 17 00:00:00 2001 From: Pavel Tatashin <pasha.tatashin(a)oracle.com> Date: Fri, 27 Oct 2017 20:11:00 -0400 Subject: x86/smpboot: Make optimization of delay calibration work correctly From: Pavel Tatashin <pasha.tatashin(a)oracle.com> commit 76ce7cfe35ef58f34e6ba85327afb5fbf6c3ff9b upstream. If the TSC has constant frequency then the delay calibration can be skipped when it has been calibrated for a package already. This is checked in calibrate_delay_is_known(), but that function is buggy in two aspects: It returns 'false' if (!tsc_disabled && !cpu_has(&cpu_data(cpu), X86_FEATURE_CONSTANT_TSC) which is obviously the reverse of the intended check and the check for the sibling mask cannot work either because the topology links have not been set up yet. Correct the condition and move the call to set_cpu_sibling_map() before invoking calibrate_delay() so the sibling check works correctly. [ tglx: Rewrote changelong ] Fixes: c25323c07345 ("x86/tsc: Use topology functions") Signed-off-by: Pavel Tatashin <pasha.tatashin(a)oracle.com> Signed-off-by: Thomas Gleixner <tglx(a)linutronix.de> Cc: peterz(a)infradead.org Cc: bob.picco(a)oracle.com Cc: steven.sistare(a)oracle.com Cc: daniel.m.jordan(a)oracle.com Link: https://lkml.kernel.org/r/20171028001100.26603-1-pasha.tatashin@oracle.com Signed-off-by: Greg Kroah-Hartman <gregkh(a)linuxfoundation.org> --- arch/x86/kernel/smpboot.c | 11 ++++++----- arch/x86/kernel/tsc.c | 8 +++----- 2 files changed, 9 insertions(+), 10 deletions(-) --- a/arch/x86/kernel/smpboot.c +++ b/arch/x86/kernel/smpboot.c @@ -194,6 +194,12 @@ static void smp_callin(void) smp_store_cpu_info(cpuid); /* + * The topology information must be up to date before + * calibrate_delay() and notify_cpu_starting(). + */ + set_cpu_sibling_map(raw_smp_processor_id()); + + /* * Get our bogomips. * Update loops_per_jiffy in cpu_data. Previous call to * smp_store_cpu_info() stored a value that is close but not as @@ -203,11 +209,6 @@ static void smp_callin(void) cpu_data(cpuid).loops_per_jiffy = loops_per_jiffy; pr_debug("Stack at about %p\n", &cpuid); - /* - * This must be done before setting cpu_online_mask - * or calling notify_cpu_starting. - */ - set_cpu_sibling_map(raw_smp_processor_id()); wmb(); notify_cpu_starting(cpuid); --- a/arch/x86/kernel/tsc.c +++ b/arch/x86/kernel/tsc.c @@ -1346,12 +1346,10 @@ void __init tsc_init(void) unsigned long calibrate_delay_is_known(void) { int sibling, cpu = smp_processor_id(); - struct cpumask *mask = topology_core_cpumask(cpu); + int constant_tsc = cpu_has(&cpu_data(cpu), X86_FEATURE_CONSTANT_TSC); + const struct cpumask *mask = topology_core_cpumask(cpu); - if (!tsc_disabled && !cpu_has(&cpu_data(cpu), X86_FEATURE_CONSTANT_TSC)) - return 0; - - if (!mask) + if (tsc_disabled || !constant_tsc || !mask) return 0; sibling = cpumask_any_but(mask, cpu); Patches currently in stable-queue which might be from pasha.tatashin(a)oracle.com are queue-4.13/x86-smpboot-make-optimization-of-delay-calibration-work-correctly.patch

7 years, 11 months

1
0
0 0

[Linux-stable-mirror] Patch "x86/oprofile/ppro: Do not use __this_cpu*() in preemptible context" has been added to the 4.13-stable tree

by gregkh＠linuxfoundation.org

This is a note to let you know that I've just added the patch titled x86/oprofile/ppro: Do not use __this_cpu*() in preemptible context to the 4.13-stable tree which can be found at: http://www.kernel.org/git/?p=linux/kernel/git/stable/stable-queue.git;a=sum… The filename of the patch is: x86-oprofile-ppro-do-not-use-__this_cpu-in-preemptible-context.patch and it can be found in the queue-4.13 subdirectory. If you, or anyone else, feels it should not be added to the stable tree, please let <stable(a)vger.kernel.org> know about it. >From a743bbeef27b9176987ec0cb7f906ab0ab52d1da Mon Sep 17 00:00:00 2001 From: Borislav Petkov <bp(a)suse.de> Date: Tue, 7 Nov 2017 18:53:07 +0100 Subject: x86/oprofile/ppro: Do not use __this_cpu*() in preemptible context From: Borislav Petkov <bp(a)suse.de> commit a743bbeef27b9176987ec0cb7f906ab0ab52d1da upstream. The warning below says it all: BUG: using __this_cpu_read() in preemptible [00000000] code: swapper/0/1 caller is __this_cpu_preempt_check CPU: 0 PID: 1 Comm: swapper/0 Not tainted 4.14.0-rc8 #4 Call Trace: dump_stack check_preemption_disabled ? do_early_param __this_cpu_preempt_check arch_perfmon_init op_nmi_init ? alloc_pci_root_info oprofile_arch_init oprofile_init do_one_initcall ... These accessors should not have been used in the first place: it is PPro so no mixed silicon revisions and thus it can simply use boot_cpu_data. Reported-by: Fengguang Wu <fengguang.wu(a)intel.com> Tested-by: Fengguang Wu <fengguang.wu(a)intel.com> Fix-creation-mandated-by: Linus Torvalds <torvalds(a)linux-foundation.org> Signed-off-by: Borislav Petkov <bp(a)suse.de> Signed-off-by: Thomas Gleixner <tglx(a)linutronix.de> Cc: Robert Richter <rric(a)kernel.org> Cc: x86(a)kernel.org Signed-off-by: Greg Kroah-Hartman <gregkh(a)linuxfoundation.org> --- arch/x86/oprofile/op_model_ppro.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) --- a/arch/x86/oprofile/op_model_ppro.c +++ b/arch/x86/oprofile/op_model_ppro.c @@ -212,8 +212,8 @@ static void arch_perfmon_setup_counters( eax.full = cpuid_eax(0xa); /* Workaround for BIOS bugs in 6/15. Taken from perfmon2 */ - if (eax.split.version_id == 0 && __this_cpu_read(cpu_info.x86) == 6 && - __this_cpu_read(cpu_info.x86_model) == 15) { + if (eax.split.version_id == 0 && boot_cpu_data.x86 == 6 && + boot_cpu_data.x86_model == 15) { eax.split.version_id = 2; eax.split.num_counters = 2; eax.split.bit_width = 40; Patches currently in stable-queue which might be from bp(a)suse.de are queue-4.13/x86-oprofile-ppro-do-not-use-__this_cpu-in-preemptible-context.patch

7 years, 11 months

1
0
0 0

[Linux-stable-mirror] Patch "x86/debug: Handle warnings before the notifier chain, to fix KGDB crash" has been added to the 4.13-stable tree

by gregkh＠linuxfoundation.org

This is a note to let you know that I've just added the patch titled x86/debug: Handle warnings before the notifier chain, to fix KGDB crash to the 4.13-stable tree which can be found at: http://www.kernel.org/git/?p=linux/kernel/git/stable/stable-queue.git;a=sum… The filename of the patch is: x86-debug-handle-warnings-before-the-notifier-chain-to-fix-kgdb-crash.patch and it can be found in the queue-4.13 subdirectory. If you, or anyone else, feels it should not be added to the stable tree, please let <stable(a)vger.kernel.org> know about it. >From b8347c2196492f4e1cccde3d92fda1cc2cc7de7e Mon Sep 17 00:00:00 2001 From: Alexander Shishkin <alexander.shishkin(a)linux.intel.com> Date: Mon, 24 Jul 2017 13:04:28 +0300 Subject: x86/debug: Handle warnings before the notifier chain, to fix KGDB crash From: Alexander Shishkin <alexander.shishkin(a)linux.intel.com> commit b8347c2196492f4e1cccde3d92fda1cc2cc7de7e upstream. Commit: 9a93848fe787 ("x86/debug: Implement __WARN() using UD0") turned warnings into UD0, but the fixup code only runs after the notify_die() chain. This is a problem, in particular, with kgdb, which kicks in as if it was a BUG(). Fix this by running the fixup code before the notifier chain in the invalid op handler path. Signed-off-by: Alexander Shishkin <alexander.shishkin(a)linux.intel.com> Tested-by: Ilya Dryomov <idryomov(a)gmail.com> Acked-by: Daniel Thompson <daniel.thompson(a)linaro.org> Acked-by: Thomas Gleixner <tglx(a)linutronix.de> Cc: Jason Wessel <jason.wessel(a)windriver.com> Cc: Arjan van de Ven <arjan(a)linux.intel.com> Cc: Borislav Petkov <bp(a)alien8.de> Cc: Linus Torvalds <torvalds(a)linux-foundation.org> Cc: Peter Zijlstra <peterz(a)infradead.org> Cc: Richard Weinberger <richard.weinberger(a)gmail.com> Link: http://lkml.kernel.org/r/20170724100428.19173-1-alexander.shishkin@linux.in… Signed-off-by: Ingo Molnar <mingo(a)kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh(a)linuxfoundation.org> --- arch/x86/kernel/traps.c | 10 +++++++--- 1 file changed, 7 insertions(+), 3 deletions(-) --- a/arch/x86/kernel/traps.c +++ b/arch/x86/kernel/traps.c @@ -221,9 +221,6 @@ do_trap_no_signal(struct task_struct *ts if (fixup_exception(regs, trapnr)) return 0; - if (fixup_bug(regs, trapnr)) - return 0; - tsk->thread.error_code = error_code; tsk->thread.trap_nr = trapnr; die(str, regs, error_code); @@ -304,6 +301,13 @@ static void do_error_trap(struct pt_regs RCU_LOCKDEP_WARN(!rcu_is_watching(), "entry code didn't wake RCU"); + /* + * WARN*()s end up here; fix them up before we call the + * notifier chain. + */ + if (!user_mode(regs) && fixup_bug(regs, trapnr)) + return; + if (notify_die(DIE_TRAP, str, regs, error_code, trapnr, signr) != NOTIFY_STOP) { cond_local_irq_enable(regs); Patches currently in stable-queue which might be from alexander.shishkin(a)linux.intel.com are queue-4.13/x86-debug-handle-warnings-before-the-notifier-chain-to-fix-kgdb-crash.patch

7 years, 11 months

1
0
0 0

[Linux-stable-mirror] [PATCH] usb: gadget: udc: renesas_usb3: fix number of the pipes

by Yoshihiro Shimoda

This controller on R-Car Gen3 has 6 pipes that included PIPE 0 for control actually. But, the datasheet has error in writing as it has 31 pipes. (However, the previous code defined 30 pipes wrongly...) Anyway, this patch fixes it. Fixes: 746bfe63bba3 ("usb: gadget: renesas_usb3: add support for Renesas USB3.0 peripheral controller") Cc: <stable(a)vger.kernel.org> # v4.5+ Signed-off-by: Yoshihiro Shimoda <yoshihiro.shimoda.uh(a)renesas.com> --- drivers/usb/gadget/udc/renesas_usb3.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/usb/gadget/udc/renesas_usb3.c b/drivers/usb/gadget/udc/renesas_usb3.c index 63a2061..6b3e8ad 100644 --- a/drivers/usb/gadget/udc/renesas_usb3.c +++ b/drivers/usb/gadget/udc/renesas_usb3.c @@ -254,7 +254,7 @@ #define USB3_EP0_SS_MAX_PACKET_SIZE 512 #define USB3_EP0_HSFS_MAX_PACKET_SIZE 64 #define USB3_EP0_BUF_SIZE 8 -#define USB3_MAX_NUM_PIPES 30 +#define USB3_MAX_NUM_PIPES 6 /* This includes PIPE 0 */ #define USB3_WAIT_US 3 #define USB3_DMA_NUM_SETTING_AREA 4 /* -- 1.9.1

7 years, 11 months

1
0
0 0

[Linux-stable-mirror] [stable] PKCS#7: fix unitialized boolean 'want'

by Ben Hutchings

Please cherry-pick this fix for 4.4 and later stable branches: commit 06aae592425701851e02bb850cb9f4997f0ae163 Author: Colin Ian King <colin.king(a)canonical.com> Date: Sat Feb 27 12:45:26 2016 +0000 PKCS#7: fix unitialized boolean 'want' Ben. -- Ben Hutchings Software Developer, Codethink Ltd.

7 years, 11 months

2
1
0 0

[Linux-stable-mirror] Patch "x86/oprofile/ppro: Do not use __this_cpu*() in preemptible context" has been added to the 3.18-stable tree

by gregkh＠linuxfoundation.org

This is a note to let you know that I've just added the patch titled x86/oprofile/ppro: Do not use __this_cpu*() in preemptible context to the 3.18-stable tree which can be found at: http://www.kernel.org/git/?p=linux/kernel/git/stable/stable-queue.git;a=sum… The filename of the patch is: x86-oprofile-ppro-do-not-use-__this_cpu-in-preemptible-context.patch and it can be found in the queue-3.18 subdirectory. If you, or anyone else, feels it should not be added to the stable tree, please let <stable(a)vger.kernel.org> know about it. >From a743bbeef27b9176987ec0cb7f906ab0ab52d1da Mon Sep 17 00:00:00 2001 From: Borislav Petkov <bp(a)suse.de> Date: Tue, 7 Nov 2017 18:53:07 +0100 Subject: x86/oprofile/ppro: Do not use __this_cpu*() in preemptible context From: Borislav Petkov <bp(a)suse.de> commit a743bbeef27b9176987ec0cb7f906ab0ab52d1da upstream. The warning below says it all: BUG: using __this_cpu_read() in preemptible [00000000] code: swapper/0/1 caller is __this_cpu_preempt_check CPU: 0 PID: 1 Comm: swapper/0 Not tainted 4.14.0-rc8 #4 Call Trace: dump_stack check_preemption_disabled ? do_early_param __this_cpu_preempt_check arch_perfmon_init op_nmi_init ? alloc_pci_root_info oprofile_arch_init oprofile_init do_one_initcall ... These accessors should not have been used in the first place: it is PPro so no mixed silicon revisions and thus it can simply use boot_cpu_data. Reported-by: Fengguang Wu <fengguang.wu(a)intel.com> Tested-by: Fengguang Wu <fengguang.wu(a)intel.com> Fix-creation-mandated-by: Linus Torvalds <torvalds(a)linux-foundation.org> Signed-off-by: Borislav Petkov <bp(a)suse.de> Signed-off-by: Thomas Gleixner <tglx(a)linutronix.de> Cc: Robert Richter <rric(a)kernel.org> Cc: x86(a)kernel.org Signed-off-by: Greg Kroah-Hartman <gregkh(a)linuxfoundation.org> --- arch/x86/oprofile/op_model_ppro.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) --- a/arch/x86/oprofile/op_model_ppro.c +++ b/arch/x86/oprofile/op_model_ppro.c @@ -212,8 +212,8 @@ static void arch_perfmon_setup_counters( eax.full = cpuid_eax(0xa); /* Workaround for BIOS bugs in 6/15. Taken from perfmon2 */ - if (eax.split.version_id == 0 && __this_cpu_read(cpu_info.x86) == 6 && - __this_cpu_read(cpu_info.x86_model) == 15) { + if (eax.split.version_id == 0 && boot_cpu_data.x86 == 6 && + boot_cpu_data.x86_model == 15) { eax.split.version_id = 2; eax.split.num_counters = 2; eax.split.bit_width = 40; Patches currently in stable-queue which might be from bp(a)suse.de are queue-3.18/x86-oprofile-ppro-do-not-use-__this_cpu-in-preemptible-context.patch

7 years, 11 months

1
0
0 0

Re: [Linux-stable-mirror] [PATCH V9 1/4] dma-mapping: Rework dma_get_cache_alignment()

by Christoph Hellwig

> diff --git a/drivers/net/ethernet/broadcom/b44.c b/drivers/net/ethernet/broadcom/b44.c > index a1125d1..2f6ffe5 100644 > --- a/drivers/net/ethernet/broadcom/b44.c > +++ b/drivers/net/ethernet/broadcom/b44.c > @@ -2344,6 +2344,10 @@ static int b44_init_one(struct ssb_device *sdev, > struct net_device *dev; > struct b44 *bp; > int err; > + unsigned int dma_desc_align_size = dma_get_cache_alignment(sdev->dma_dev); > + > + /* Setup paramaters for syncing RX/TX DMA descriptors */ > + dma_desc_sync_size = max_t(unsigned int, dma_desc_align_size, sizeof(struct dma_desc)); > > instance++; > > @@ -2587,12 +2591,8 @@ static inline void b44_pci_exit(void) > > static int __init b44_init(void) > { > - unsigned int dma_desc_align_size = dma_get_cache_alignment(); > int err; > > - /* Setup paramaters for syncing RX/TX DMA descriptors */ > - dma_desc_sync_size = max_t(unsigned int, dma_desc_align_size, sizeof(struct dma_desc)); > - This looks wrong - you override a global variable for each probed device.

7 years, 11 months

2
1
0 0

[Linux-stable-mirror] Patch "netfilter: nat: Revert "netfilter: nat: convert nat bysrc hash to rhashtable"" has been added to the 4.9-stable tree

by gregkh＠linuxfoundation.org

This is a note to let you know that I've just added the patch titled netfilter: nat: Revert "netfilter: nat: convert nat bysrc hash to rhashtable" to the 4.9-stable tree which can be found at: http://www.kernel.org/git/?p=linux/kernel/git/stable/stable-queue.git;a=sum… The filename of the patch is: netfilter-nat-revert-netfilter-nat-convert-nat-bysrc-hash-to-rhashtable.patch and it can be found in the queue-4.9 subdirectory. If you, or anyone else, feels it should not be added to the stable tree, please let <stable(a)vger.kernel.org> know about it. >From e1bf1687740ce1a3598a1c5e452b852ff2190682 Mon Sep 17 00:00:00 2001 From: Florian Westphal <fw(a)strlen.de> Date: Wed, 6 Sep 2017 14:39:51 +0200 Subject: netfilter: nat: Revert "netfilter: nat: convert nat bysrc hash to rhashtable" From: Florian Westphal <fw(a)strlen.de> commit e1bf1687740ce1a3598a1c5e452b852ff2190682 upstream. This reverts commit 870190a9ec9075205c0fa795a09fa931694a3ff1. It was not a good idea. The custom hash table was a much better fit for this purpose. A fast lookup is not essential, in fact for most cases there is no lookup at all because original tuple is not taken and can be used as-is. What needs to be fast is insertion and deletion. rhlist removal however requires a rhlist walk. We can have thousands of entries in such a list if source port/addresses are reused for multiple flows, if this happens removal requests are so expensive that deletions of a few thousand flows can take several seconds(!). The advantages that we got from rhashtable are: 1) table auto-sizing 2) multiple locks 1) would be nice to have, but it is not essential as we have at most one lookup per new flow, so even a million flows in the bysource table are not a problem compared to current deletion cost. 2) is easy to add to custom hash table. I tried to add hlist_node to rhlist to speed up rhltable_remove but this isn't doable without changing semantics. rhltable_remove_fast will check that the to-be-deleted object is part of the table and that requires a list walk that we want to avoid. Furthermore, using hlist_node increases size of struct rhlist_head, which in turn increases nf_conn size. Link: https://bugzilla.kernel.org/show_bug.cgi?id=196821 Reported-by: Ivan Babrou <ibobrik(a)gmail.com> Signed-off-by: Florian Westphal <fw(a)strlen.de> Signed-off-by: Pablo Neira Ayuso <pablo(a)netfilter.org> Signed-off-by: Greg Kroah-Hartman <gregkh(a)linuxfoundation.org> --- include/net/netfilter/nf_conntrack.h | 3 include/net/netfilter/nf_nat.h | 1 net/netfilter/nf_nat_core.c | 131 ++++++++++++++--------------------- 3 files changed, 56 insertions(+), 79 deletions(-) --- a/include/net/netfilter/nf_conntrack.h +++ b/include/net/netfilter/nf_conntrack.h @@ -17,7 +17,6 @@ #include <linux/bitops.h> #include <linux/compiler.h> #include <linux/atomic.h> -#include <linux/rhashtable.h> #include <linux/netfilter/nf_conntrack_tcp.h> #include <linux/netfilter/nf_conntrack_dccp.h> @@ -101,7 +100,7 @@ struct nf_conn { possible_net_t ct_net; #if IS_ENABLED(CONFIG_NF_NAT) - struct rhlist_head nat_bysource; + struct hlist_node nat_bysource; #endif /* all members below initialized via memset */ u8 __nfct_init_offset[0]; --- a/include/net/netfilter/nf_nat.h +++ b/include/net/netfilter/nf_nat.h @@ -1,6 +1,5 @@ #ifndef _NF_NAT_H #define _NF_NAT_H -#include <linux/rhashtable.h> #include <linux/netfilter_ipv4.h> #include <linux/netfilter/nf_nat.h> #include <net/netfilter/nf_conntrack_tuple.h> --- a/net/netfilter/nf_nat_core.c +++ b/net/netfilter/nf_nat_core.c @@ -30,19 +30,17 @@ #include <net/netfilter/nf_conntrack_zones.h> #include <linux/netfilter/nf_nat.h> +static DEFINE_SPINLOCK(nf_nat_lock); + static DEFINE_MUTEX(nf_nat_proto_mutex); static const struct nf_nat_l3proto __rcu *nf_nat_l3protos[NFPROTO_NUMPROTO] __read_mostly; static const struct nf_nat_l4proto __rcu **nf_nat_l4protos[NFPROTO_NUMPROTO] __read_mostly; -struct nf_nat_conn_key { - const struct net *net; - const struct nf_conntrack_tuple *tuple; - const struct nf_conntrack_zone *zone; -}; - -static struct rhltable nf_nat_bysource_table; +static struct hlist_head *nf_nat_bysource __read_mostly; +static unsigned int nf_nat_htable_size __read_mostly; +static unsigned int nf_nat_hash_rnd __read_mostly; inline const struct nf_nat_l3proto * __nf_nat_l3proto_find(u8 family) @@ -121,17 +119,19 @@ int nf_xfrm_me_harder(struct net *net, s EXPORT_SYMBOL(nf_xfrm_me_harder); #endif /* CONFIG_XFRM */ -static u32 nf_nat_bysource_hash(const void *data, u32 len, u32 seed) +/* We keep an extra hash for each conntrack, for fast searching. */ +static inline unsigned int +hash_by_src(const struct net *n, const struct nf_conntrack_tuple *tuple) { - const struct nf_conntrack_tuple *t; - const struct nf_conn *ct = data; + unsigned int hash; + + get_random_once(&nf_nat_hash_rnd, sizeof(nf_nat_hash_rnd)); - t = &ct->tuplehash[IP_CT_DIR_ORIGINAL].tuple; /* Original src, to ensure we map it consistently if poss. */ + hash = jhash2((u32 *)&tuple->src, sizeof(tuple->src) / sizeof(u32), + tuple->dst.protonum ^ nf_nat_hash_rnd ^ net_hash_mix(n)); - seed ^= net_hash_mix(nf_ct_net(ct)); - return jhash2((const u32 *)&t->src, sizeof(t->src) / sizeof(u32), - t->dst.protonum ^ seed); + return reciprocal_scale(hash, nf_nat_htable_size); } /* Is this tuple already taken? (not by us) */ @@ -187,28 +187,6 @@ same_src(const struct nf_conn *ct, t->src.u.all == tuple->src.u.all); } -static int nf_nat_bysource_cmp(struct rhashtable_compare_arg *arg, - const void *obj) -{ - const struct nf_nat_conn_key *key = arg->key; - const struct nf_conn *ct = obj; - - if (!same_src(ct, key->tuple) || - !net_eq(nf_ct_net(ct), key->net) || - !nf_ct_zone_equal(ct, key->zone, IP_CT_DIR_ORIGINAL)) - return 1; - - return 0; -} - -static struct rhashtable_params nf_nat_bysource_params = { - .head_offset = offsetof(struct nf_conn, nat_bysource), - .obj_hashfn = nf_nat_bysource_hash, - .obj_cmpfn = nf_nat_bysource_cmp, - .nelem_hint = 256, - .min_size = 1024, -}; - /* Only called for SRC manip */ static int find_appropriate_src(struct net *net, @@ -219,26 +197,22 @@ find_appropriate_src(struct net *net, struct nf_conntrack_tuple *result, const struct nf_nat_range *range) { + unsigned int h = hash_by_src(net, tuple); const struct nf_conn *ct; - struct nf_nat_conn_key key = { - .net = net, - .tuple = tuple, - .zone = zone - }; - struct rhlist_head *hl, *h; - - hl = rhltable_lookup(&nf_nat_bysource_table, &key, - nf_nat_bysource_params); - rhl_for_each_entry_rcu(ct, h, hl, nat_bysource) { - nf_ct_invert_tuplepr(result, - &ct->tuplehash[IP_CT_DIR_REPLY].tuple); - result->dst = tuple->dst; + hlist_for_each_entry_rcu(ct, &nf_nat_bysource[h], nat_bysource) { + if (same_src(ct, tuple) && + net_eq(net, nf_ct_net(ct)) && + nf_ct_zone_equal(ct, zone, IP_CT_DIR_ORIGINAL)) { + /* Copy source part from reply tuple. */ + nf_ct_invert_tuplepr(result, + &ct->tuplehash[IP_CT_DIR_REPLY].tuple); + result->dst = tuple->dst; - if (in_range(l3proto, l4proto, result, range)) - return 1; + if (in_range(l3proto, l4proto, result, range)) + return 1; + } } - return 0; } @@ -411,6 +385,7 @@ nf_nat_setup_info(struct nf_conn *ct, const struct nf_nat_range *range, enum nf_nat_manip_type maniptype) { + struct net *net = nf_ct_net(ct); struct nf_conntrack_tuple curr_tuple, new_tuple; struct nf_conn_nat *nat; @@ -452,19 +427,16 @@ nf_nat_setup_info(struct nf_conn *ct, } if (maniptype == NF_NAT_MANIP_SRC) { - struct nf_nat_conn_key key = { - .net = nf_ct_net(ct), - .tuple = &ct->tuplehash[IP_CT_DIR_ORIGINAL].tuple, - .zone = nf_ct_zone(ct), - }; - int err; - - err = rhltable_insert_key(&nf_nat_bysource_table, - &key, - &ct->nat_bysource, - nf_nat_bysource_params); - if (err) - return NF_DROP; + unsigned int srchash; + + srchash = hash_by_src(net, + &ct->tuplehash[IP_CT_DIR_ORIGINAL].tuple); + spin_lock_bh(&nf_nat_lock); + /* nf_conntrack_alter_reply might re-allocate extension aera */ + nat = nfct_nat(ct); + hlist_add_head_rcu(&ct->nat_bysource, + &nf_nat_bysource[srchash]); + spin_unlock_bh(&nf_nat_lock); } /* It's done. */ @@ -578,9 +550,10 @@ static int nf_nat_proto_clean(struct nf_ * Else, when the conntrack is destoyed, nf_nat_cleanup_conntrack() * will delete entry from already-freed table. */ + spin_lock_bh(&nf_nat_lock); + hlist_del_rcu(&ct->nat_bysource); ct->status &= ~IPS_NAT_DONE_MASK; - rhltable_remove(&nf_nat_bysource_table, &ct->nat_bysource, - nf_nat_bysource_params); + spin_unlock_bh(&nf_nat_lock); /* don't delete conntrack. Although that would make things a lot * simpler, we'd end up flushing all conntracks on nat rmmod. @@ -710,8 +683,11 @@ static void nf_nat_cleanup_conntrack(str if (!nat) return; - rhltable_remove(&nf_nat_bysource_table, &ct->nat_bysource, - nf_nat_bysource_params); + NF_CT_ASSERT(ct->status & IPS_SRC_NAT_DONE); + + spin_lock_bh(&nf_nat_lock); + hlist_del_rcu(&ct->nat_bysource); + spin_unlock_bh(&nf_nat_lock); } static struct nf_ct_ext_type nat_extend __read_mostly = { @@ -846,13 +822,16 @@ static int __init nf_nat_init(void) { int ret; - ret = rhltable_init(&nf_nat_bysource_table, &nf_nat_bysource_params); - if (ret) - return ret; + /* Leave them the same for the moment. */ + nf_nat_htable_size = nf_conntrack_htable_size; + + nf_nat_bysource = nf_ct_alloc_hashtable(&nf_nat_htable_size, 0); + if (!nf_nat_bysource) + return -ENOMEM; ret = nf_ct_extend_register(&nat_extend); if (ret < 0) { - rhltable_destroy(&nf_nat_bysource_table); + nf_ct_free_hashtable(nf_nat_bysource, nf_nat_htable_size); printk(KERN_ERR "nf_nat_core: Unable to register extension\n"); return ret; } @@ -876,7 +855,7 @@ static int __init nf_nat_init(void) return 0; cleanup_extend: - rhltable_destroy(&nf_nat_bysource_table); + nf_ct_free_hashtable(nf_nat_bysource, nf_nat_htable_size); nf_ct_extend_unregister(&nat_extend); return ret; } @@ -896,8 +875,8 @@ static void __exit nf_nat_cleanup(void) for (i = 0; i < NFPROTO_NUMPROTO; i++) kfree(nf_nat_l4protos[i]); - - rhltable_destroy(&nf_nat_bysource_table); + synchronize_net(); + nf_ct_free_hashtable(nf_nat_bysource, nf_nat_htable_size); } MODULE_LICENSE("GPL"); Patches currently in stable-queue which might be from fw(a)strlen.de are queue-4.9/netfilter-nat-revert-netfilter-nat-convert-nat-bysrc-hash-to-rhashtable.patch

7 years, 11 months

1
0
0 0

[Linux-stable-mirror] [PATCH] KVM: x86: inject exceptions produced by x86_decode_insn

by Paolo Bonzini

Sometimes, a processor might execute an instruction while another processor is updating the page tables for that instruction's code page, but before the TLB shootdown completes. The interesting case happens if the page is in the TLB. In general, the processor will succeed in executing the instruction and nothing bad happens. However, what if the instruction is an MMIO access? If *that* happens, KVM invokes the emulator, and the emulator gets the updated page tables. If the update side had marked the code page as non present, the page table walk then will fail and so will x86_decode_insn. Unfortunately, even though kvm_fetch_guest_virt is correctly returning X86EMUL_PROPAGATE_FAULT, x86_decode_insn's caller treats the failure as a fatal error if the instruction cannot simply be reexecuted (as is the case for MMIO). And this in fact happened sometimes when rebooting Windows 2012r2 guests. Just checking ctxt->have_exception and injecting the exception if true is enough to fix the case. Thanks to Eduardo Habkost for helping in the debugging of this issue. Reported-by: Yanan Fu <yfu(a)redhat.com> Cc: Eduardo Habkost <ehabkost(a)redhat.com> Cc: stable(a)vger.kernel.org Signed-off-by: Paolo Bonzini <pbonzini(a)redhat.com> --- arch/x86/kvm/x86.c | 2 ++ 1 file changed, 2 insertions(+) diff --git a/arch/x86/kvm/x86.c b/arch/x86/kvm/x86.c index 34c85aa2e2d1..6dbed9022797 100644 --- a/arch/x86/kvm/x86.c +++ b/arch/x86/kvm/x86.c @@ -5722,6 +5722,8 @@ int x86_emulate_instruction(struct kvm_vcpu *vcpu, if (reexecute_instruction(vcpu, cr2, write_fault_to_spt, emulation_type)) return EMULATE_DONE; + if (ctxt->have_exception && inject_emulated_exception(vcpu)) + return EMULATE_DONE; if (emulation_type & EMULTYPE_SKIP) return EMULATE_FAIL; return handle_emulation_failure(vcpu); -- 1.8.3.1

7 years, 11 months

3
2
0 0

Re: [Linux-stable-mirror] [PATCH 3.16 076/294] batman-adv: fix TT sync flag inconsistencies

by Linus Lüssing

Hi Ben, On Tue, Nov 07, 2017 at 01:42:35PM +0000, Ben Hutchings wrote: > That function didn't exist in 3.16 (at least not under that name). Ah, you're right, back then the netlink interface did not exist in batman-adv yet, only the debugfs one. batadv_tt_global_print_entry would be the equivalent function for debugfs. But not worth the effort now, in my opinion. I'm fine with this proposed patch for 3.16 now. Thanks for the clarification! And I'm happy to see this patch backported. Regards, Linus

7 years, 11 months

1
0
0 0

[Linux-stable-mirror] [PATCH] fs: avoid NULL pointer dereference for nobh on write error

by jglisse＠redhat.com

From: Jérôme Glisse <jglisse(a)redhat.com> (Result of code inspection only, i do not have a bug, nor know a bug that would be explain by this issue. Is there a kernel trace database one can query for that ?) When fs is mounted with nobh temporary buffer_head are created during write and they are only associated with the page when a filesystem error happen. When this happen nobh_write_begin() or nobh_write_end() call attach_nobh_buffers() which expect that provided buffer_head list is circular (ie tail entry point to head entry). If it is not the case it will dereference the last pointer in the list which is NULL (last item in the list point to NULL see alloc_page_buffers()) and thus SEGFAULT. Hence nobh_write_begin() must make the buffer_head list circular as alloc_page_buffers() is not responsible for doing that. (This might worth including in 4.14 as i don't think it can regress anything but i am not a filesystem expert). Note i did not make the list circular inside attach_nobh_buffers() as some patchset i am working on also expect the list to be circular no matter what. But if people are more confortable with me doing that in my patchset the fix can be move to attach_nobh_buffers(). Signed-off-by: Jérôme Glisse <jglisse(a)redhat.com> Cc: Al Viro <viro(a)zeniv.linux.org.uk> Cc: linux-fsdevel(a)vger.kernel.org Cc: linux-kernel(a)vger.kernel.org Cc: stable(a)vger.kernel.org Cc: Linus Torvalds <torvalds(a)linux-foundation.org> --- fs/buffer.c | 9 ++++++++- 1 file changed, 8 insertions(+), 1 deletion(-) diff --git a/fs/buffer.c b/fs/buffer.c index 170df856bdb9..6bc47c11d6ac 100644 --- a/fs/buffer.c +++ b/fs/buffer.c @@ -2598,7 +2598,7 @@ int nobh_write_begin(struct address_space *mapping, struct inode *inode = mapping->host; const unsigned blkbits = inode->i_blkbits; const unsigned blocksize = 1 << blkbits; - struct buffer_head *head, *bh; + struct buffer_head *head, *bh, *tail; struct page *page; pgoff_t index; unsigned from, to; @@ -2643,6 +2643,13 @@ int nobh_write_begin(struct address_space *mapping, ret = -ENOMEM; goto out_release; } + /* We need to make buffer_head list circular to avoid NULL SEGFAULT */ + bh = head; + do { + tail = bh; + bh = bh->b_this_page; + } while (bh); + tail->b_this_page = head; block_in_file = (sector_t)page->index << (PAGE_SHIFT - blkbits); -- 2.13.6

7 years, 11 months

3
2
0 0

[Linux-stable-mirror] [PATCH] irqchip/gic-v3: fix ppi-partitions lookup

by Johan Hovold

Fix child-node lookup during initialisation, which ended up searching the whole device tree depth-first starting at the parent rather than just matching on its children. To make things worse, the parent giq node was prematurely freed, while the ppi-partitions node was leaked. Fixes: e3825ba1af3a ("irqchip/gic-v3: Add support for partitioned PPIs") Cc: stable <stable(a)vger.kernel.org> # 4.7 Cc: Marc Zyngier <marc.zyngier(a)arm.com> Signed-off-by: Johan Hovold <johan(a)kernel.org> --- drivers/irqchip/irq-gic-v3.c | 9 ++++++--- 1 file changed, 6 insertions(+), 3 deletions(-) diff --git a/drivers/irqchip/irq-gic-v3.c b/drivers/irqchip/irq-gic-v3.c index 17221143f505..af1f8373d8bf 100644 --- a/drivers/irqchip/irq-gic-v3.c +++ b/drivers/irqchip/irq-gic-v3.c @@ -1103,18 +1103,18 @@ static void __init gic_populate_ppi_partitions(struct device_node *gic_node) int nr_parts; struct partition_affinity *parts; - parts_node = of_find_node_by_name(gic_node, "ppi-partitions"); + parts_node = of_get_child_by_name(gic_node, "ppi-partitions"); if (!parts_node) return; nr_parts = of_get_child_count(parts_node); if (!nr_parts) - return; + goto out_put_node; parts = kzalloc(sizeof(*parts) * nr_parts, GFP_KERNEL); if (WARN_ON(!parts)) - return; + goto out_put_node; for_each_child_of_node(parts_node, child_part) { struct partition_affinity *part; @@ -1181,6 +1181,9 @@ static void __init gic_populate_ppi_partitions(struct device_node *gic_node) gic_data.ppi_descs[i] = desc; } + +out_put_node: + of_node_put(parts_node); } static void __init gic_of_setup_kvm_info(struct device_node *node) -- 2.15.0

7 years, 11 months

2
3
0 0

[Linux-stable-mirror] Patch "can: sun4i: handle overrun in RX FIFO" has been added to the 4.9-stable tree

by gregkh＠linuxfoundation.org

This is a note to let you know that I've just added the patch titled can: sun4i: handle overrun in RX FIFO to the 4.9-stable tree which can be found at: http://www.kernel.org/git/?p=linux/kernel/git/stable/stable-queue.git;a=sum… The filename of the patch is: can-sun4i-handle-overrun-in-rx-fifo.patch and it can be found in the queue-4.9 subdirectory. If you, or anyone else, feels it should not be added to the stable tree, please let <stable(a)vger.kernel.org> know about it. >From 4dcf924c2eda0c47a5c53b7703e3dc65ddaa8920 Mon Sep 17 00:00:00 2001 From: Gerhard Bertelsmann <info(a)gerhard-bertelsmann.de> Date: Mon, 6 Nov 2017 18:16:56 +0100 Subject: can: sun4i: handle overrun in RX FIFO From: Gerhard Bertelsmann <info(a)gerhard-bertelsmann.de> commit 4dcf924c2eda0c47a5c53b7703e3dc65ddaa8920 upstream. SUN4Is CAN IP has a 64 byte deep FIFO buffer. If the buffer is not drained fast enough (overrun) it's getting mangled. Already received frames are dropped - the data can't be restored. Signed-off-by: Gerhard Bertelsmann <info(a)gerhard-bertelsmann.de> Signed-off-by: Marc Kleine-Budde <mkl(a)pengutronix.de> Signed-off-by: Greg Kroah-Hartman <gregkh(a)linuxfoundation.org> --- drivers/net/can/sun4i_can.c | 12 ++++++++++-- 1 file changed, 10 insertions(+), 2 deletions(-) --- a/drivers/net/can/sun4i_can.c +++ b/drivers/net/can/sun4i_can.c @@ -539,6 +539,13 @@ static int sun4i_can_err(struct net_devi } stats->rx_over_errors++; stats->rx_errors++; + + /* reset the CAN IP by entering reset mode + * ignoring timeout error + */ + set_reset_mode(dev); + set_normal_mode(dev); + /* clear bit */ sun4i_can_write_cmdreg(priv, SUN4I_CMD_CLEAR_OR_FLAG); } @@ -653,8 +660,9 @@ static irqreturn_t sun4i_can_interrupt(i netif_wake_queue(dev); can_led_event(dev, CAN_LED_EVENT_TX); } - if (isrc & SUN4I_INT_RBUF_VLD) { - /* receive interrupt */ + if ((isrc & SUN4I_INT_RBUF_VLD) && + !(isrc & SUN4I_INT_DATA_OR)) { + /* receive interrupt - don't read if overrun occurred */ while (status & SUN4I_STA_RBUF_RDY) { /* RX buffer is not empty */ sun4i_can_rx(dev); Patches currently in stable-queue which might be from info(a)gerhard-bertelsmann.de are queue-4.9/can-sun4i-handle-overrun-in-rx-fifo.patch

7 years, 11 months

1
0
0 0

[Linux-stable-mirror] Patch "can: ifi: Fix transmitter delay calculation" has been added to the 4.9-stable tree

by gregkh＠linuxfoundation.org

This is a note to let you know that I've just added the patch titled can: ifi: Fix transmitter delay calculation to the 4.9-stable tree which can be found at: http://www.kernel.org/git/?p=linux/kernel/git/stable/stable-queue.git;a=sum… The filename of the patch is: can-ifi-fix-transmitter-delay-calculation.patch and it can be found in the queue-4.9 subdirectory. If you, or anyone else, feels it should not be added to the stable tree, please let <stable(a)vger.kernel.org> know about it. >From 4f7116757b4bd99e4ef2636c7d957a6d63035d11 Mon Sep 17 00:00:00 2001 From: Marek Vasut <marex(a)denx.de> Date: Fri, 10 Nov 2017 11:22:39 +0100 Subject: can: ifi: Fix transmitter delay calculation From: Marek Vasut <marex(a)denx.de> commit 4f7116757b4bd99e4ef2636c7d957a6d63035d11 upstream. The CANFD transmitter delay calculation formula was updated in the latest software drop from IFI and improves the behavior of the IFI CANFD core during bitrate switching. Use the new formula to improve stability of the CANFD operation. Signed-off-by: Marek Vasut <marex(a)denx.de> Cc: Markus Marb <markus(a)marb.org> Signed-off-by: Marc Kleine-Budde <mkl(a)pengutronix.de> Signed-off-by: Greg Kroah-Hartman <gregkh(a)linuxfoundation.org> --- drivers/net/can/ifi_canfd/ifi_canfd.c | 6 +++--- 1 file changed, 3 insertions(+), 3 deletions(-) --- a/drivers/net/can/ifi_canfd/ifi_canfd.c +++ b/drivers/net/can/ifi_canfd/ifi_canfd.c @@ -670,9 +670,9 @@ static void ifi_canfd_set_bittiming(stru priv->base + IFI_CANFD_FTIME); /* Configure transmitter delay */ - tdc = (dbt->brp * (dbt->phase_seg1 + 1)) & IFI_CANFD_TDELAY_MASK; - writel(IFI_CANFD_TDELAY_EN | IFI_CANFD_TDELAY_ABS | tdc, - priv->base + IFI_CANFD_TDELAY); + tdc = dbt->brp * (dbt->prop_seg + dbt->phase_seg1); + tdc &= IFI_CANFD_TDELAY_MASK; + writel(IFI_CANFD_TDELAY_EN | tdc, priv->base + IFI_CANFD_TDELAY); } static void ifi_canfd_set_filter(struct net_device *ndev, const u32 id, Patches currently in stable-queue which might be from marex(a)denx.de are queue-4.9/can-ifi-fix-transmitter-delay-calculation.patch

7 years, 11 months

1
0
0 0

[Linux-stable-mirror] Patch "can: c_can: don't indicate triple sampling support for D_CAN" has been added to the 4.9-stable tree

by gregkh＠linuxfoundation.org

This is a note to let you know that I've just added the patch titled can: c_can: don't indicate triple sampling support for D_CAN to the 4.9-stable tree which can be found at: http://www.kernel.org/git/?p=linux/kernel/git/stable/stable-queue.git;a=sum… The filename of the patch is: can-c_can-don-t-indicate-triple-sampling-support-for-d_can.patch and it can be found in the queue-4.9 subdirectory. If you, or anyone else, feels it should not be added to the stable tree, please let <stable(a)vger.kernel.org> know about it. >From fb5f0b3ef69b95e665e4bbe8a3de7201f09f1071 Mon Sep 17 00:00:00 2001 From: =?UTF-8?q?Richard=20Sch=C3=BCtz?= <rschuetz(a)uni-koblenz.de> Date: Sun, 29 Oct 2017 13:03:22 +0100 Subject: can: c_can: don't indicate triple sampling support for D_CAN MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit From: Richard Schütz <rschuetz(a)uni-koblenz.de> commit fb5f0b3ef69b95e665e4bbe8a3de7201f09f1071 upstream. The D_CAN controller doesn't provide a triple sampling mode, so don't set the CAN_CTRLMODE_3_SAMPLES flag in ctrlmode_supported. Currently enabling triple sampling is a no-op. Signed-off-by: Richard Schütz <rschuetz(a)uni-koblenz.de> Signed-off-by: Marc Kleine-Budde <mkl(a)pengutronix.de> Signed-off-by: Greg Kroah-Hartman <gregkh(a)linuxfoundation.org> --- drivers/net/can/c_can/c_can_pci.c | 1 - drivers/net/can/c_can/c_can_platform.c | 1 - 2 files changed, 2 deletions(-) --- a/drivers/net/can/c_can/c_can_pci.c +++ b/drivers/net/can/c_can/c_can_pci.c @@ -178,7 +178,6 @@ static int c_can_pci_probe(struct pci_de break; case BOSCH_D_CAN: priv->regs = reg_map_d_can; - priv->can.ctrlmode_supported |= CAN_CTRLMODE_3_SAMPLES; break; default: ret = -EINVAL; --- a/drivers/net/can/c_can/c_can_platform.c +++ b/drivers/net/can/c_can/c_can_platform.c @@ -320,7 +320,6 @@ static int c_can_plat_probe(struct platf break; case BOSCH_D_CAN: priv->regs = reg_map_d_can; - priv->can.ctrlmode_supported |= CAN_CTRLMODE_3_SAMPLES; priv->read_reg = c_can_plat_read_reg_aligned_to_16bit; priv->write_reg = c_can_plat_write_reg_aligned_to_16bit; priv->read_reg32 = d_can_plat_read_reg32; Patches currently in stable-queue which might be from rschuetz(a)uni-koblenz.de are queue-4.9/can-c_can-don-t-indicate-triple-sampling-support-for-d_can.patch

7 years, 11 months

1
0
0 0

[Linux-stable-mirror] Patch "can: sun4i: handle overrun in RX FIFO" has been added to the 4.4-stable tree

by gregkh＠linuxfoundation.org

This is a note to let you know that I've just added the patch titled can: sun4i: handle overrun in RX FIFO to the 4.4-stable tree which can be found at: http://www.kernel.org/git/?p=linux/kernel/git/stable/stable-queue.git;a=sum… The filename of the patch is: can-sun4i-handle-overrun-in-rx-fifo.patch and it can be found in the queue-4.4 subdirectory. If you, or anyone else, feels it should not be added to the stable tree, please let <stable(a)vger.kernel.org> know about it. >From 4dcf924c2eda0c47a5c53b7703e3dc65ddaa8920 Mon Sep 17 00:00:00 2001 From: Gerhard Bertelsmann <info(a)gerhard-bertelsmann.de> Date: Mon, 6 Nov 2017 18:16:56 +0100 Subject: can: sun4i: handle overrun in RX FIFO From: Gerhard Bertelsmann <info(a)gerhard-bertelsmann.de> commit 4dcf924c2eda0c47a5c53b7703e3dc65ddaa8920 upstream. SUN4Is CAN IP has a 64 byte deep FIFO buffer. If the buffer is not drained fast enough (overrun) it's getting mangled. Already received frames are dropped - the data can't be restored. Signed-off-by: Gerhard Bertelsmann <info(a)gerhard-bertelsmann.de> Signed-off-by: Marc Kleine-Budde <mkl(a)pengutronix.de> Signed-off-by: Greg Kroah-Hartman <gregkh(a)linuxfoundation.org> --- drivers/net/can/sun4i_can.c | 12 ++++++++++-- 1 file changed, 10 insertions(+), 2 deletions(-) --- a/drivers/net/can/sun4i_can.c +++ b/drivers/net/can/sun4i_can.c @@ -539,6 +539,13 @@ static int sun4i_can_err(struct net_devi } stats->rx_over_errors++; stats->rx_errors++; + + /* reset the CAN IP by entering reset mode + * ignoring timeout error + */ + set_reset_mode(dev); + set_normal_mode(dev); + /* clear bit */ sun4i_can_write_cmdreg(priv, SUN4I_CMD_CLEAR_OR_FLAG); } @@ -653,8 +660,9 @@ static irqreturn_t sun4i_can_interrupt(i netif_wake_queue(dev); can_led_event(dev, CAN_LED_EVENT_TX); } - if (isrc & SUN4I_INT_RBUF_VLD) { - /* receive interrupt */ + if ((isrc & SUN4I_INT_RBUF_VLD) && + !(isrc & SUN4I_INT_DATA_OR)) { + /* receive interrupt - don't read if overrun occurred */ while (status & SUN4I_STA_RBUF_RDY) { /* RX buffer is not empty */ sun4i_can_rx(dev); Patches currently in stable-queue which might be from info(a)gerhard-bertelsmann.de are queue-4.4/can-sun4i-handle-overrun-in-rx-fifo.patch

7 years, 11 months

1
0
0 0

[Linux-stable-mirror] Patch "can: c_can: don't indicate triple sampling support for D_CAN" has been added to the 4.4-stable tree

by gregkh＠linuxfoundation.org

This is a note to let you know that I've just added the patch titled can: c_can: don't indicate triple sampling support for D_CAN to the 4.4-stable tree which can be found at: http://www.kernel.org/git/?p=linux/kernel/git/stable/stable-queue.git;a=sum… The filename of the patch is: can-c_can-don-t-indicate-triple-sampling-support-for-d_can.patch and it can be found in the queue-4.4 subdirectory. If you, or anyone else, feels it should not be added to the stable tree, please let <stable(a)vger.kernel.org> know about it. >From fb5f0b3ef69b95e665e4bbe8a3de7201f09f1071 Mon Sep 17 00:00:00 2001 From: =?UTF-8?q?Richard=20Sch=C3=BCtz?= <rschuetz(a)uni-koblenz.de> Date: Sun, 29 Oct 2017 13:03:22 +0100 Subject: can: c_can: don't indicate triple sampling support for D_CAN MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit From: Richard Schütz <rschuetz(a)uni-koblenz.de> commit fb5f0b3ef69b95e665e4bbe8a3de7201f09f1071 upstream. The D_CAN controller doesn't provide a triple sampling mode, so don't set the CAN_CTRLMODE_3_SAMPLES flag in ctrlmode_supported. Currently enabling triple sampling is a no-op. Signed-off-by: Richard Schütz <rschuetz(a)uni-koblenz.de> Signed-off-by: Marc Kleine-Budde <mkl(a)pengutronix.de> Signed-off-by: Greg Kroah-Hartman <gregkh(a)linuxfoundation.org> --- drivers/net/can/c_can/c_can_pci.c | 1 - drivers/net/can/c_can/c_can_platform.c | 1 - 2 files changed, 2 deletions(-) --- a/drivers/net/can/c_can/c_can_pci.c +++ b/drivers/net/can/c_can/c_can_pci.c @@ -178,7 +178,6 @@ static int c_can_pci_probe(struct pci_de break; case BOSCH_D_CAN: priv->regs = reg_map_d_can; - priv->can.ctrlmode_supported |= CAN_CTRLMODE_3_SAMPLES; break; default: ret = -EINVAL; --- a/drivers/net/can/c_can/c_can_platform.c +++ b/drivers/net/can/c_can/c_can_platform.c @@ -320,7 +320,6 @@ static int c_can_plat_probe(struct platf break; case BOSCH_D_CAN: priv->regs = reg_map_d_can; - priv->can.ctrlmode_supported |= CAN_CTRLMODE_3_SAMPLES; priv->read_reg = c_can_plat_read_reg_aligned_to_16bit; priv->write_reg = c_can_plat_write_reg_aligned_to_16bit; priv->read_reg32 = d_can_plat_read_reg32; Patches currently in stable-queue which might be from rschuetz(a)uni-koblenz.de are queue-4.4/can-c_can-don-t-indicate-triple-sampling-support-for-d_can.patch

7 years, 11 months

1
0
0 0

[Linux-stable-mirror] Patch "can: sun4i: handle overrun in RX FIFO" has been added to the 4.13-stable tree

by gregkh＠linuxfoundation.org

This is a note to let you know that I've just added the patch titled can: sun4i: handle overrun in RX FIFO to the 4.13-stable tree which can be found at: http://www.kernel.org/git/?p=linux/kernel/git/stable/stable-queue.git;a=sum… The filename of the patch is: can-sun4i-handle-overrun-in-rx-fifo.patch and it can be found in the queue-4.13 subdirectory. If you, or anyone else, feels it should not be added to the stable tree, please let <stable(a)vger.kernel.org> know about it. >From 4dcf924c2eda0c47a5c53b7703e3dc65ddaa8920 Mon Sep 17 00:00:00 2001 From: Gerhard Bertelsmann <info(a)gerhard-bertelsmann.de> Date: Mon, 6 Nov 2017 18:16:56 +0100 Subject: can: sun4i: handle overrun in RX FIFO From: Gerhard Bertelsmann <info(a)gerhard-bertelsmann.de> commit 4dcf924c2eda0c47a5c53b7703e3dc65ddaa8920 upstream. SUN4Is CAN IP has a 64 byte deep FIFO buffer. If the buffer is not drained fast enough (overrun) it's getting mangled. Already received frames are dropped - the data can't be restored. Signed-off-by: Gerhard Bertelsmann <info(a)gerhard-bertelsmann.de> Signed-off-by: Marc Kleine-Budde <mkl(a)pengutronix.de> Signed-off-by: Greg Kroah-Hartman <gregkh(a)linuxfoundation.org> --- drivers/net/can/sun4i_can.c | 12 ++++++++++-- 1 file changed, 10 insertions(+), 2 deletions(-) --- a/drivers/net/can/sun4i_can.c +++ b/drivers/net/can/sun4i_can.c @@ -539,6 +539,13 @@ static int sun4i_can_err(struct net_devi } stats->rx_over_errors++; stats->rx_errors++; + + /* reset the CAN IP by entering reset mode + * ignoring timeout error + */ + set_reset_mode(dev); + set_normal_mode(dev); + /* clear bit */ sun4i_can_write_cmdreg(priv, SUN4I_CMD_CLEAR_OR_FLAG); } @@ -653,8 +660,9 @@ static irqreturn_t sun4i_can_interrupt(i netif_wake_queue(dev); can_led_event(dev, CAN_LED_EVENT_TX); } - if (isrc & SUN4I_INT_RBUF_VLD) { - /* receive interrupt */ + if ((isrc & SUN4I_INT_RBUF_VLD) && + !(isrc & SUN4I_INT_DATA_OR)) { + /* receive interrupt - don't read if overrun occurred */ while (status & SUN4I_STA_RBUF_RDY) { /* RX buffer is not empty */ sun4i_can_rx(dev); Patches currently in stable-queue which might be from info(a)gerhard-bertelsmann.de are queue-4.13/can-sun4i-handle-overrun-in-rx-fifo.patch

7 years, 11 months

1
0
0 0

[Linux-stable-mirror] Patch "can: ifi: Fix transmitter delay calculation" has been added to the 4.13-stable tree

by gregkh＠linuxfoundation.org

This is a note to let you know that I've just added the patch titled can: ifi: Fix transmitter delay calculation to the 4.13-stable tree which can be found at: http://www.kernel.org/git/?p=linux/kernel/git/stable/stable-queue.git;a=sum… The filename of the patch is: can-ifi-fix-transmitter-delay-calculation.patch and it can be found in the queue-4.13 subdirectory. If you, or anyone else, feels it should not be added to the stable tree, please let <stable(a)vger.kernel.org> know about it. >From 4f7116757b4bd99e4ef2636c7d957a6d63035d11 Mon Sep 17 00:00:00 2001 From: Marek Vasut <marex(a)denx.de> Date: Fri, 10 Nov 2017 11:22:39 +0100 Subject: can: ifi: Fix transmitter delay calculation From: Marek Vasut <marex(a)denx.de> commit 4f7116757b4bd99e4ef2636c7d957a6d63035d11 upstream. The CANFD transmitter delay calculation formula was updated in the latest software drop from IFI and improves the behavior of the IFI CANFD core during bitrate switching. Use the new formula to improve stability of the CANFD operation. Signed-off-by: Marek Vasut <marex(a)denx.de> Cc: Markus Marb <markus(a)marb.org> Signed-off-by: Marc Kleine-Budde <mkl(a)pengutronix.de> Signed-off-by: Greg Kroah-Hartman <gregkh(a)linuxfoundation.org> --- drivers/net/can/ifi_canfd/ifi_canfd.c | 6 +++--- 1 file changed, 3 insertions(+), 3 deletions(-) --- a/drivers/net/can/ifi_canfd/ifi_canfd.c +++ b/drivers/net/can/ifi_canfd/ifi_canfd.c @@ -670,9 +670,9 @@ static void ifi_canfd_set_bittiming(stru priv->base + IFI_CANFD_FTIME); /* Configure transmitter delay */ - tdc = (dbt->brp * (dbt->phase_seg1 + 1)) & IFI_CANFD_TDELAY_MASK; - writel(IFI_CANFD_TDELAY_EN | IFI_CANFD_TDELAY_ABS | tdc, - priv->base + IFI_CANFD_TDELAY); + tdc = dbt->brp * (dbt->prop_seg + dbt->phase_seg1); + tdc &= IFI_CANFD_TDELAY_MASK; + writel(IFI_CANFD_TDELAY_EN | tdc, priv->base + IFI_CANFD_TDELAY); } static void ifi_canfd_set_filter(struct net_device *ndev, const u32 id, Patches currently in stable-queue which might be from marex(a)denx.de are queue-4.13/can-ifi-fix-transmitter-delay-calculation.patch

7 years, 11 months

1
0
0 0

[Linux-stable-mirror] Patch "can: peak: Add support for new PCIe/M2 CAN FD interfaces" has been added to the 4.13-stable tree

by gregkh＠linuxfoundation.org

This is a note to let you know that I've just added the patch titled can: peak: Add support for new PCIe/M2 CAN FD interfaces to the 4.13-stable tree which can be found at: http://www.kernel.org/git/?p=linux/kernel/git/stable/stable-queue.git;a=sum… The filename of the patch is: can-peak-add-support-for-new-pcie-m2-can-fd-interfaces.patch and it can be found in the queue-4.13 subdirectory. If you, or anyone else, feels it should not be added to the stable tree, please let <stable(a)vger.kernel.org> know about it. >From 4cbdd0ee67191481ec57ceed94febdfef95c9f25 Mon Sep 17 00:00:00 2001 From: Stephane Grosjean <s.grosjean(a)peak-system.com> Date: Thu, 9 Nov 2017 14:42:14 +0100 Subject: can: peak: Add support for new PCIe/M2 CAN FD interfaces From: Stephane Grosjean <s.grosjean(a)peak-system.com> commit 4cbdd0ee67191481ec57ceed94febdfef95c9f25 upstream. This adds support for the following PEAK-System CAN FD interfaces: PCAN-cPCIe FD CAN FD Interface for cPCI Serial (2 or 4 channels) PCAN-PCIe/104-Express CAN FD Interface for PCIe/104-Express (1, 2 or 4 ch.) PCAN-miniPCIe FD CAN FD Interface for PCIe Mini (1, 2 or 4 channels) PCAN-PCIe FD OEM CAN FD Interface for PCIe OEM version (1, 2 or 4 ch.) PCAN-M.2 CAN FD Interface for M.2 (1 or 2 channels) Like the PCAN-PCIe FD interface, all of these boards run the same IP Core that is able to handle CAN FD (see also http://www.peak-system.com). Signed-off-by: Stephane Grosjean <s.grosjean(a)peak-system.com> Signed-off-by: Marc Kleine-Budde <mkl(a)pengutronix.de> Signed-off-by: Greg Kroah-Hartman <gregkh(a)linuxfoundation.org> --- drivers/net/can/peak_canfd/peak_pciefd_main.c | 14 ++++++++++++-- 1 file changed, 12 insertions(+), 2 deletions(-) --- a/drivers/net/can/peak_canfd/peak_pciefd_main.c +++ b/drivers/net/can/peak_canfd/peak_pciefd_main.c @@ -29,14 +29,19 @@ #include "peak_canfd_user.h" MODULE_AUTHOR("Stephane Grosjean <s.grosjean(a)peak-system.com>"); -MODULE_DESCRIPTION("Socket-CAN driver for PEAK PCAN PCIe FD family cards"); -MODULE_SUPPORTED_DEVICE("PEAK PCAN PCIe FD CAN cards"); +MODULE_DESCRIPTION("Socket-CAN driver for PEAK PCAN PCIe/M.2 FD family cards"); +MODULE_SUPPORTED_DEVICE("PEAK PCAN PCIe/M.2 FD CAN cards"); MODULE_LICENSE("GPL v2"); #define PCIEFD_DRV_NAME "peak_pciefd" #define PEAK_PCI_VENDOR_ID 0x001c /* The PCI device and vendor IDs */ #define PEAK_PCIEFD_ID 0x0013 /* for PCIe slot cards */ +#define PCAN_CPCIEFD_ID 0x0014 /* for Compact-PCI Serial slot cards */ +#define PCAN_PCIE104FD_ID 0x0017 /* for PCIe-104 Express slot cards */ +#define PCAN_MINIPCIEFD_ID 0x0018 /* for mini-PCIe slot cards */ +#define PCAN_PCIEFD_OEM_ID 0x0019 /* for PCIe slot OEM cards */ +#define PCAN_M2_ID 0x001a /* for M2 slot cards */ /* PEAK PCIe board access description */ #define PCIEFD_BAR0_SIZE (64 * 1024) @@ -203,6 +208,11 @@ struct pciefd_board { /* supported device ids. */ static const struct pci_device_id peak_pciefd_tbl[] = { {PEAK_PCI_VENDOR_ID, PEAK_PCIEFD_ID, PCI_ANY_ID, PCI_ANY_ID,}, + {PEAK_PCI_VENDOR_ID, PCAN_CPCIEFD_ID, PCI_ANY_ID, PCI_ANY_ID,}, + {PEAK_PCI_VENDOR_ID, PCAN_PCIE104FD_ID, PCI_ANY_ID, PCI_ANY_ID,}, + {PEAK_PCI_VENDOR_ID, PCAN_MINIPCIEFD_ID, PCI_ANY_ID, PCI_ANY_ID,}, + {PEAK_PCI_VENDOR_ID, PCAN_PCIEFD_OEM_ID, PCI_ANY_ID, PCI_ANY_ID,}, + {PEAK_PCI_VENDOR_ID, PCAN_M2_ID, PCI_ANY_ID, PCI_ANY_ID,}, {0,} }; Patches currently in stable-queue which might be from s.grosjean(a)peak-system.com are queue-4.13/can-peak-add-support-for-new-pcie-m2-can-fd-interfaces.patch

7 years, 11 months

1
0
0 0

[Linux-stable-mirror] Patch "can: c_can: don't indicate triple sampling support for D_CAN" has been added to the 4.13-stable tree

by gregkh＠linuxfoundation.org

This is a note to let you know that I've just added the patch titled can: c_can: don't indicate triple sampling support for D_CAN to the 4.13-stable tree which can be found at: http://www.kernel.org/git/?p=linux/kernel/git/stable/stable-queue.git;a=sum… The filename of the patch is: can-c_can-don-t-indicate-triple-sampling-support-for-d_can.patch and it can be found in the queue-4.13 subdirectory. If you, or anyone else, feels it should not be added to the stable tree, please let <stable(a)vger.kernel.org> know about it. >From fb5f0b3ef69b95e665e4bbe8a3de7201f09f1071 Mon Sep 17 00:00:00 2001 From: =?UTF-8?q?Richard=20Sch=C3=BCtz?= <rschuetz(a)uni-koblenz.de> Date: Sun, 29 Oct 2017 13:03:22 +0100 Subject: can: c_can: don't indicate triple sampling support for D_CAN MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit From: Richard Schütz <rschuetz(a)uni-koblenz.de> commit fb5f0b3ef69b95e665e4bbe8a3de7201f09f1071 upstream. The D_CAN controller doesn't provide a triple sampling mode, so don't set the CAN_CTRLMODE_3_SAMPLES flag in ctrlmode_supported. Currently enabling triple sampling is a no-op. Signed-off-by: Richard Schütz <rschuetz(a)uni-koblenz.de> Signed-off-by: Marc Kleine-Budde <mkl(a)pengutronix.de> Signed-off-by: Greg Kroah-Hartman <gregkh(a)linuxfoundation.org> --- drivers/net/can/c_can/c_can_pci.c | 1 - drivers/net/can/c_can/c_can_platform.c | 1 - 2 files changed, 2 deletions(-) --- a/drivers/net/can/c_can/c_can_pci.c +++ b/drivers/net/can/c_can/c_can_pci.c @@ -178,7 +178,6 @@ static int c_can_pci_probe(struct pci_de break; case BOSCH_D_CAN: priv->regs = reg_map_d_can; - priv->can.ctrlmode_supported |= CAN_CTRLMODE_3_SAMPLES; break; default: ret = -EINVAL; --- a/drivers/net/can/c_can/c_can_platform.c +++ b/drivers/net/can/c_can/c_can_platform.c @@ -320,7 +320,6 @@ static int c_can_plat_probe(struct platf break; case BOSCH_D_CAN: priv->regs = reg_map_d_can; - priv->can.ctrlmode_supported |= CAN_CTRLMODE_3_SAMPLES; priv->read_reg = c_can_plat_read_reg_aligned_to_16bit; priv->write_reg = c_can_plat_write_reg_aligned_to_16bit; priv->read_reg32 = d_can_plat_read_reg32; Patches currently in stable-queue which might be from rschuetz(a)uni-koblenz.de are queue-4.13/can-c_can-don-t-indicate-triple-sampling-support-for-d_can.patch

7 years, 11 months

1
0
0 0

[Linux-stable-mirror] Patch "can: c_can: don't indicate triple sampling support for D_CAN" has been added to the 3.18-stable tree

by gregkh＠linuxfoundation.org

This is a note to let you know that I've just added the patch titled can: c_can: don't indicate triple sampling support for D_CAN to the 3.18-stable tree which can be found at: http://www.kernel.org/git/?p=linux/kernel/git/stable/stable-queue.git;a=sum… The filename of the patch is: can-c_can-don-t-indicate-triple-sampling-support-for-d_can.patch and it can be found in the queue-3.18 subdirectory. If you, or anyone else, feels it should not be added to the stable tree, please let <stable(a)vger.kernel.org> know about it. >From fb5f0b3ef69b95e665e4bbe8a3de7201f09f1071 Mon Sep 17 00:00:00 2001 From: =?UTF-8?q?Richard=20Sch=C3=BCtz?= <rschuetz(a)uni-koblenz.de> Date: Sun, 29 Oct 2017 13:03:22 +0100 Subject: can: c_can: don't indicate triple sampling support for D_CAN MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit From: Richard Schütz <rschuetz(a)uni-koblenz.de> commit fb5f0b3ef69b95e665e4bbe8a3de7201f09f1071 upstream. The D_CAN controller doesn't provide a triple sampling mode, so don't set the CAN_CTRLMODE_3_SAMPLES flag in ctrlmode_supported. Currently enabling triple sampling is a no-op. Signed-off-by: Richard Schütz <rschuetz(a)uni-koblenz.de> Signed-off-by: Marc Kleine-Budde <mkl(a)pengutronix.de> Signed-off-by: Greg Kroah-Hartman <gregkh(a)linuxfoundation.org> --- drivers/net/can/c_can/c_can_pci.c | 1 - drivers/net/can/c_can/c_can_platform.c | 1 - 2 files changed, 2 deletions(-) --- a/drivers/net/can/c_can/c_can_pci.c +++ b/drivers/net/can/c_can/c_can_pci.c @@ -177,7 +177,6 @@ static int c_can_pci_probe(struct pci_de break; case BOSCH_D_CAN: priv->regs = reg_map_d_can; - priv->can.ctrlmode_supported |= CAN_CTRLMODE_3_SAMPLES; break; default: ret = -EINVAL; --- a/drivers/net/can/c_can/c_can_platform.c +++ b/drivers/net/can/c_can/c_can_platform.c @@ -257,7 +257,6 @@ static int c_can_plat_probe(struct platf break; case BOSCH_D_CAN: priv->regs = reg_map_d_can; - priv->can.ctrlmode_supported |= CAN_CTRLMODE_3_SAMPLES; priv->read_reg = c_can_plat_read_reg_aligned_to_16bit; priv->write_reg = c_can_plat_write_reg_aligned_to_16bit; priv->read_reg32 = d_can_plat_read_reg32; Patches currently in stable-queue which might be from rschuetz(a)uni-koblenz.de are queue-3.18/can-c_can-don-t-indicate-triple-sampling-support-for-d_can.patch

7 years, 11 months

1
0
0 0

[Linux-stable-mirror] [PATCH v2] mtd: Avoid probe failures when mtd->dbg.dfs_dir is invalid

by Boris Brezillon

Commit e8e3edb95ce6 ("mtd: create per-device and module-scope debugfs entries") tried to make MTD related debugfs stuff consistent across the MTD framework by creating a root <debugfs>/mtd/ directory containing one directory per MTD device. The problem is that, by default, the MTD layer only registers the master device if no partitions are defined for this master. This behavior breaks all drivers that expect mtd->dbg.dfs_dir to be filled correctly after calling mtd_device_register() in order to add their own debugfs entries. The only way we can force all MTD masters to be registered no matter if they expose partitions or not is by enabling the CONFIG_MTD_PARTITIONED_MASTER option. In such situations, there's no other solution but to accept skipping debugfs initialization when dbg.dfs_dir is invalid, and when this happens, inform the user that he should consider enabling CONFIG_MTD_PARTITIONED_MASTER. Fixes: e8e3edb95ce6 ("mtd: create per-device and module-scope debugfs entries") Cc: <stable(a)vger.kernel.org> Cc: Mario J. Rugiero <mrugiero(a)gmail.com> Signed-off-by: Boris Brezillon <boris.brezillon(a)free-electrons.com> --- drivers/mtd/devices/docg3.c | 7 ++++++- drivers/mtd/nand/nandsim.c | 13 +++++++++---- 2 files changed, 15 insertions(+), 5 deletions(-) diff --git a/drivers/mtd/devices/docg3.c b/drivers/mtd/devices/docg3.c index 84b16133554b..0806f72102c0 100644 --- a/drivers/mtd/devices/docg3.c +++ b/drivers/mtd/devices/docg3.c @@ -1814,8 +1814,13 @@ static void __init doc_dbg_register(struct mtd_info *floor) struct dentry *root = floor->dbg.dfs_dir; struct docg3 *docg3 = floor->priv; - if (IS_ERR_OR_NULL(root)) + if (IS_ERR_OR_NULL(root)) { + if (IS_ENABLED(CONFIG_DEBUG_FS) && + !IS_ENABLED(CONFIG_MTD_PARTITIONED_MASTER)) + dev_warn(floor->dev.parent, + "CONFIG_MTD_PARTITIONED_MASTER must be enabled to expose debugfs stuff\n"); return; + } debugfs_create_file("docg3_flashcontrol", S_IRUSR, root, docg3, &flashcontrol_fops); diff --git a/drivers/mtd/nand/nandsim.c b/drivers/mtd/nand/nandsim.c index 246b4393118e..44322a363ba5 100644 --- a/drivers/mtd/nand/nandsim.c +++ b/drivers/mtd/nand/nandsim.c @@ -520,11 +520,16 @@ static int nandsim_debugfs_create(struct nandsim *dev) struct dentry *root = nsmtd->dbg.dfs_dir; struct dentry *dent; - if (!IS_ENABLED(CONFIG_DEBUG_FS)) + /* + * Just skip debugfs initialization when the debugfs directory is + * missing. + */ + if (IS_ERR_OR_NULL(root)) { + if (IS_ENABLED(CONFIG_DEBUG_FS) && + !IS_ENABLED(CONFIG_MTD_PARTITIONED_MASTER)) + NS_WARN("CONFIG_MTD_PARTITIONED_MASTER must be enabled to expose debugfs stuff\n"); return 0; - - if (IS_ERR_OR_NULL(root)) - return -1; + } dent = debugfs_create_file("nandsim_wear_report", S_IRUSR, root, dev, &dfs_fops); -- 2.11.0

7 years, 11 months

1
1
0 0

[Linux-stable-mirror] [PATCH] USB: ulpi: fix bus-node lookup

by Johan Hovold

Fix bus-node lookup during registration, which ended up searching the whole device tree depth-first starting at the parent (or grand parent) rather than just matching on its children. To make things worse, the parent (or grand-parent) node could end being prematurely freed as well. Fixes: ef6a7bcfb01c ("usb: ulpi: Support device discovery via DT") Reported-by: Peter Robinson <pbrobinson(a)gmail.com> Reported-by: Stephen Boyd <sboyd(a)codeaurora.org> Cc: stable <stable(a)vger.kernel.org> # 4.10 Signed-off-by: Johan Hovold <johan(a)kernel.org> --- drivers/usb/common/ulpi.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) diff --git a/drivers/usb/common/ulpi.c b/drivers/usb/common/ulpi.c index 8b351444cc40..9a2ab6751a23 100644 --- a/drivers/usb/common/ulpi.c +++ b/drivers/usb/common/ulpi.c @@ -180,9 +180,9 @@ static int ulpi_of_register(struct ulpi *ulpi) /* Find a ulpi bus underneath the parent or the grandparent */ parent = ulpi->dev.parent; if (parent->of_node) - np = of_find_node_by_name(parent->of_node, "ulpi"); + np = of_get_child_by_name(parent->of_node, "ulpi"); else if (parent->parent && parent->parent->of_node) - np = of_find_node_by_name(parent->parent->of_node, "ulpi"); + np = of_get_child_by_name(parent->parent->of_node, "ulpi"); if (!np) return 0; -- 2.15.0

7 years, 11 months

1
0
0 0

Re: [Linux-stable-mirror] [RFC PATCH v2] Fix: x86: Add missing core serializing instruction on migration

by Mathieu Desnoyers

Fixing the stable(a)kernel.org CC. ----- On Nov 11, 2017, at 10:03 AM, Mathieu Desnoyers mathieu.desnoyers(a)efficios.com wrote: > x86 has a missing core serializing instruction in migration scenarios. > > Given that x86-32 can return to user-space with sysexit, and x86-64 > through sysretq and sysretl, which are not core serializing, the > following user-space self-modifiying code (JIT) scenario can occur: > > CPU 0 CPU 1 > > User-space self-modify code > Preempted > migrated -> > scheduler selects task > Return to user-space (iret or sysexit) > User-space issues sync_core() > <- migrated > scheduler selects task > Return to user-space (sysexit) > jump to modified code > Run modified code without sync_core() -> bug. > > This migration pattern can return to user-space through sysexit, > sysretl, or sysretq, which are not core serializing, and therefore > breaks sequential consistency expectations from a single-threaded > process. > > Fix this issue by introducing sync_core_before_usermode(), invoked the > first time a runqueue finishes a task switch after receiving a migrated > thread. > > Architectures defining the sync_core_before_usermode() static inline > need to define ARCH_HAS_SYNC_CORE_BEFORE_USERMODE. > > Signed-off-by: Mathieu Desnoyers <mathieu.desnoyers(a)efficios.com> > CC: Peter Zijlstra <peterz(a)infradead.org> > CC: Andy Lutomirski <luto(a)kernel.org> > CC: Paul E. McKenney <paulmck(a)linux.vnet.ibm.com> > CC: Boqun Feng <boqun.feng(a)gmail.com> > CC: Andrew Hunter <ahh(a)google.com> > CC: Maged Michael <maged.michael(a)gmail.com> > CC: Avi Kivity <avi(a)scylladb.com> > CC: Benjamin Herrenschmidt <benh(a)kernel.crashing.org> > CC: Paul Mackerras <paulus(a)samba.org> > CC: Michael Ellerman <mpe(a)ellerman.id.au> > CC: Dave Watson <davejwatson(a)fb.com> > CC: Thomas Gleixner <tglx(a)linutronix.de> > CC: Ingo Molnar <mingo(a)redhat.com> > CC: "H. Peter Anvin" <hpa(a)zytor.com> > CC: Andrea Parri <parri.andrea(a)gmail.com> > CC: Russell King <linux(a)armlinux.org.uk> > CC: Greg Hackmann <ghackmann(a)google.com> > CC: Will Deacon <will.deacon(a)arm.com> > CC: David Sehr <sehr(a)google.com> > CC: Linus Torvalds <torvalds(a)linux-foundation.org> > CC: x86(a)kernel.org > CC: linux-arch(a)vger.kernel.org > CC: stable(a)kernel.org > > --- > Changes since v1: > - Fold patch introducing sync_core_before_usermode and the fix > into a single patch. > - CC stable(a)kernel.org > --- > arch/x86/Kconfig | 1 + > arch/x86/include/asm/processor.h | 10 ++++++++++ > include/linux/processor.h | 6 ++++++ > kernel/sched/core.c | 7 +++++++ > kernel/sched/sched.h | 1 + > 5 files changed, 25 insertions(+) > > diff --git a/arch/x86/Kconfig b/arch/x86/Kconfig > index 2fdb23313dd5..b27456f04cc6 100644 > --- a/arch/x86/Kconfig > +++ b/arch/x86/Kconfig > @@ -62,6 +62,7 @@ config X86 > select ARCH_HAS_SG_CHAIN > select ARCH_HAS_STRICT_KERNEL_RWX > select ARCH_HAS_STRICT_MODULE_RWX > + select ARCH_HAS_SYNC_CORE_BEFORE_USERMODE > select ARCH_HAS_UBSAN_SANITIZE_ALL > select ARCH_HAS_ZONE_DEVICE if X86_64 > select ARCH_HAVE_NMI_SAFE_CMPXCHG > diff --git a/arch/x86/include/asm/processor.h b/arch/x86/include/asm/processor.h > index bdac19ab2488..6daf70a8c81c 100644 > --- a/arch/x86/include/asm/processor.h > +++ b/arch/x86/include/asm/processor.h > @@ -706,6 +706,16 @@ static inline void sync_core(void) > #endif > } > > +/* > + * Ensure that a core serializing instruction is issued before returning > + * to user-mode. x86 implements return to user-space through sysexit, > + * sysretl, and sysretq, which are not core serializing. > + */ > +static inline void sync_core_before_usermode(void) > +{ > + sync_core(); > +} > + > extern void select_idle_routine(const struct cpuinfo_x86 *c); > extern void amd_e400_c1e_apic_setup(void); > > diff --git a/include/linux/processor.h b/include/linux/processor.h > index dbc952eec869..7d12e6fa050e 100644 > --- a/include/linux/processor.h > +++ b/include/linux/processor.h > @@ -68,4 +68,10 @@ do { \ > > #endif > > +#ifndef ARCH_HAS_SYNC_CORE_BEFORE_USERMODE > +static inline sync_core_before_usermode(void) > +{ > +} > +#endif > + > #endif /* _LINUX_PROCESSOR_H */ > diff --git a/kernel/sched/core.c b/kernel/sched/core.c > index d17c5da523a0..39c0bbe8f259 100644 > --- a/kernel/sched/core.c > +++ b/kernel/sched/core.c > @@ -927,6 +927,7 @@ static struct rq *move_queued_task(struct rq *rq, struct > rq_flags *rf, > > rq_lock(rq, rf); > BUG_ON(task_cpu(p) != new_cpu); > + rq->need_sync_core = 1; > enqueue_task(rq, p, 0); > p->on_rq = TASK_ON_RQ_QUEUED; > check_preempt_curr(rq, p, 0); > @@ -2654,6 +2655,12 @@ static struct rq *finish_task_switch(struct task_struct > *prev) > * to use. > */ > smp_mb__after_unlock_lock(); > +#ifdef CONFIG_SMP > + if (unlikely(rq->need_sync_core)) { > + sync_core_before_usermode(); > + rq->need_sync_core = 0; > + } > +#endif > finish_lock_switch(rq, prev); > finish_arch_post_lock_switch(); > > diff --git a/kernel/sched/sched.h b/kernel/sched/sched.h > index 3b448ba82225..e02cc362637c 100644 > --- a/kernel/sched/sched.h > +++ b/kernel/sched/sched.h > @@ -734,6 +734,7 @@ struct rq { > /* For active balancing */ > int active_balance; > int push_cpu; > + int need_sync_core; > struct cpu_stop_work active_balance_work; > /* cpu of this runqueue: */ > int cpu; > -- > 2.11.0 -- Mathieu Desnoyers EfficiOS Inc. http://www.efficios.com

7 years, 11 months

1
0
0 0

[Linux-stable-mirror] [PATCH] mtd: Fix debugfs file creation when mtd->->dbg.dfs_dir is invalid

by Boris Brezillon

Commit e8e3edb95ce6 ("mtd: create per-device and module-scope debugfs entries") tried to make MTD related debugfs stuff consistent across the MTD framework by creating a root <debugfs>/mtd/ directory containing one directory per MTD device. The problem is that, by default, the MTD layer only registers the master device if no partitions are defined for this master. This behavior breaks all drivers that expect mtd->dbg.dfs_dir to be filled correctly after calling mtd_device_register() in order to add their own debugfs entries. The only way we can force all MTD masters to be registered no matter if they expose partitions or not is by enabling the CONFIG_MTD_PARTITIONED_MASTER option. In such situations, there's no other solution but to accept skipping debugfs initialization when dbg.dfs_dir is invalid, and when this happens, inform the user that he should consider enabling CONFIG_MTD_PARTITIONED_MASTER. Fixes: e8e3edb95ce6 ("mtd: create per-device and module-scope debugfs entries") Cc: <stable(a)vger.kernel.org> Cc: Mario J. Rugiero <mrugiero(a)gmail.com> Signed-off-by: Boris Brezillon <boris.brezillon(a)free-electrons.com> --- drivers/mtd/devices/docg3.c | 7 ++++++- drivers/mtd/nand/nandsim.c | 12 +++++++++--- 2 files changed, 15 insertions(+), 4 deletions(-) diff --git a/drivers/mtd/devices/docg3.c b/drivers/mtd/devices/docg3.c index 84b16133554b..0806f72102c0 100644 --- a/drivers/mtd/devices/docg3.c +++ b/drivers/mtd/devices/docg3.c @@ -1814,8 +1814,13 @@ static void __init doc_dbg_register(struct mtd_info *floor) struct dentry *root = floor->dbg.dfs_dir; struct docg3 *docg3 = floor->priv; - if (IS_ERR_OR_NULL(root)) + if (IS_ERR_OR_NULL(root)) { + if (IS_ENABLED(CONFIG_DEBUG_FS) && + !IS_ENABLED(CONFIG_MTD_PARTITIONED_MASTER)) + dev_warn(floor->dev.parent, + "CONFIG_MTD_PARTITIONED_MASTER must be enabled to expose debugfs stuff\n"); return; + } debugfs_create_file("docg3_flashcontrol", S_IRUSR, root, docg3, &flashcontrol_fops); diff --git a/drivers/mtd/nand/nandsim.c b/drivers/mtd/nand/nandsim.c index 246b4393118e..a22f4d7ca1cb 100644 --- a/drivers/mtd/nand/nandsim.c +++ b/drivers/mtd/nand/nandsim.c @@ -520,11 +520,17 @@ static int nandsim_debugfs_create(struct nandsim *dev) struct dentry *root = nsmtd->dbg.dfs_dir; struct dentry *dent; - if (!IS_ENABLED(CONFIG_DEBUG_FS)) - return 0; + if (IS_ENABLED(CONFIG_DEBUG_FS) && + !IS_ENABLED(CONFIG_MTD_PARTITIONED_MASTER) && + dev->nbparts) + NS_WARN("CONFIG_MTD_PARTITIONED_MASTER must be enabled to expose debugfs stuff\n"); + /* + * Just skip debugfs initialization when the debugfs directory is + * missing. + */ if (IS_ERR_OR_NULL(root)) - return -1; + return 0; dent = debugfs_create_file("nandsim_wear_report", S_IRUSR, root, dev, &dfs_fops); -- 2.11.0

7 years, 11 months

1
2
0 0

[Linux-stable-mirror] [PATCH v3 01/11] drm/i915: Update watermark state correctly in sanitize_watermarks

by Maarten Lankhorst

We no longer use intel_crtc->wm.active for watermarks any more, which was incorrect. But this uncovered a bug in sanitize_watermarks(), which meant that we wrote the correct watermarks, but the next update would still use the wrong hw watermarks for calculating. This caused all further updates to fail with -EINVAL and the log would reveal an error like the one below: [ 10.043902] [drm:ilk_validate_wm_level.part.8 [i915]] Sprite WM0 too large 56 (max 0) [ 10.043960] [drm:ilk_validate_pipe_wm [i915]] LP0 watermark invalid [ 10.044030] [drm:intel_crtc_atomic_check [i915]] No valid intermediate pipe watermarks are possible Signed-off-by: Maarten Lankhorst <maarten.lankhorst(a)linux.intel.com> Fixes: b6b178a77210 ("drm/i915: Calculate ironlake intermediate watermarks correctly, v2.") Cc: stable(a)vger.kernel.org #v4.8+ --- drivers/gpu/drm/i915/intel_display.c | 2 ++ 1 file changed, 2 insertions(+) diff --git a/drivers/gpu/drm/i915/intel_display.c b/drivers/gpu/drm/i915/intel_display.c index 84817ccc5305..17665ee06c9a 100644 --- a/drivers/gpu/drm/i915/intel_display.c +++ b/drivers/gpu/drm/i915/intel_display.c @@ -14442,6 +14442,8 @@ static void sanitize_watermarks(struct drm_device *dev) cs->wm.need_postvbl_update = true; dev_priv->display.optimize_watermarks(intel_state, cs); + + to_intel_crtc_state(crtc->state)->wm = cs->wm; } put_state: -- 2.15.0

7 years, 11 months

2
2
0 0

[Linux-stable-mirror] Patch "drm/bridge: adv7511: Rework adv7511_power_on/off() so they can be reused internally" has been added to the 4.9-stable tree

by gregkh＠linuxfoundation.org

This is a note to let you know that I've just added the patch titled drm/bridge: adv7511: Rework adv7511_power_on/off() so they can be reused internally to the 4.9-stable tree which can be found at: http://www.kernel.org/git/?p=linux/kernel/git/stable/stable-queue.git;a=sum… The filename of the patch is: drm-bridge-adv7511-rework-adv7511_power_on-off-so-they-can-be-reused-internally.patch and it can be found in the queue-4.9 subdirectory. If you, or anyone else, feels it should not be added to the stable tree, please let <stable(a)vger.kernel.org> know about it. >From 651e4769ba2a9f20c4b8a823ae2727bf7fa9c9f0 Mon Sep 17 00:00:00 2001 From: John Stultz <john.stultz(a)linaro.org> Date: Mon, 16 Jan 2017 16:52:50 -0800 Subject: drm/bridge: adv7511: Rework adv7511_power_on/off() so they can be reused internally From: John Stultz <john.stultz(a)linaro.org> commit 651e4769ba2a9f20c4b8a823ae2727bf7fa9c9f0 upstream. In chasing down issues with EDID probing, I found some duplicated but incomplete logic used to power the chip on and off. This patch refactors the adv7511_power_on/off functions, so they can be used for internal needs. Cc: David Airlie <airlied(a)linux.ie> Cc: Archit Taneja <architt(a)codeaurora.org> Cc: Wolfram Sang <wsa+renesas(a)sang-engineering.com> Cc: Lars-Peter Clausen <lars(a)metafoo.de> Cc: Laurent Pinchart <laurent.pinchart(a)ideasonboard.com> Cc: dri-devel(a)lists.freedesktop.org Signed-off-by: John Stultz <john.stultz(a)linaro.org> Signed-off-by: Archit Taneja <architt(a)codeaurora.org> Link: http://patchwork.freedesktop.org/patch/msgid/1484614372-15342-5-git-send-em… Signed-off-by: Nhan Nguyen <nhan.nguyen.yb(a)renesas.com> Signed-off-by: Greg Kroah-Hartman <gregkh(a)linuxfoundation.org> --- drivers/gpu/drm/bridge/adv7511/adv7511_drv.c | 15 +++++++++++---- 1 file changed, 11 insertions(+), 4 deletions(-) --- a/drivers/gpu/drm/bridge/adv7511/adv7511_drv.c +++ b/drivers/gpu/drm/bridge/adv7511/adv7511_drv.c @@ -325,7 +325,7 @@ static void adv7511_set_link_config(stru adv7511->rgb = config->input_colorspace == HDMI_COLORSPACE_RGB; } -static void adv7511_power_on(struct adv7511 *adv7511) +static void __adv7511_power_on(struct adv7511 *adv7511) { adv7511->current_edid_segment = -1; @@ -354,6 +354,11 @@ static void adv7511_power_on(struct adv7 regmap_update_bits(adv7511->regmap, ADV7511_REG_POWER2, ADV7511_REG_POWER2_HPD_SRC_MASK, ADV7511_REG_POWER2_HPD_SRC_NONE); +} + +static void adv7511_power_on(struct adv7511 *adv7511) +{ + __adv7511_power_on(adv7511); /* * Most of the registers are reset during power down or when HPD is low. @@ -362,21 +367,23 @@ static void adv7511_power_on(struct adv7 if (adv7511->type == ADV7533) adv7533_dsi_power_on(adv7511); - adv7511->powered = true; } -static void adv7511_power_off(struct adv7511 *adv7511) +static void __adv7511_power_off(struct adv7511 *adv7511) { /* TODO: setup additional power down modes */ regmap_update_bits(adv7511->regmap, ADV7511_REG_POWER, ADV7511_POWER_POWER_DOWN, ADV7511_POWER_POWER_DOWN); regcache_mark_dirty(adv7511->regmap); +} +static void adv7511_power_off(struct adv7511 *adv7511) +{ + __adv7511_power_off(adv7511); if (adv7511->type == ADV7533) adv7533_dsi_power_off(adv7511); - adv7511->powered = false; } Patches currently in stable-queue which might be from john.stultz(a)linaro.org are queue-4.9/drm-bridge-adv7511-re-write-the-i2c-address-before-edid-probing.patch queue-4.9/drm-bridge-adv7511-rework-adv7511_power_on-off-so-they-can-be-reused-internally.patch queue-4.9/drm-bridge-adv7511-reuse-__adv7511_power_on-off-when-probing-edid.patch

7 years, 11 months

1
0
0 0

[Linux-stable-mirror] Patch "drm/bridge: adv7511: Reuse __adv7511_power_on/off() when probing EDID" has been added to the 4.9-stable tree

by gregkh＠linuxfoundation.org

This is a note to let you know that I've just added the patch titled drm/bridge: adv7511: Reuse __adv7511_power_on/off() when probing EDID to the 4.9-stable tree which can be found at: http://www.kernel.org/git/?p=linux/kernel/git/stable/stable-queue.git;a=sum… The filename of the patch is: drm-bridge-adv7511-reuse-__adv7511_power_on-off-when-probing-edid.patch and it can be found in the queue-4.9 subdirectory. If you, or anyone else, feels it should not be added to the stable tree, please let <stable(a)vger.kernel.org> know about it. >From 4226d9b127cf4758ba0e07931b3f0d59f1b1a50c Mon Sep 17 00:00:00 2001 From: John Stultz <john.stultz(a)linaro.org> Date: Mon, 16 Jan 2017 16:52:51 -0800 Subject: drm/bridge: adv7511: Reuse __adv7511_power_on/off() when probing EDID From: John Stultz <john.stultz(a)linaro.org> commit 4226d9b127cf4758ba0e07931b3f0d59f1b1a50c upstream. Thus this patch changes the EDID probing logic so that we re-use the __adv7511_power_on/off() calls instead of duplciating logic. This does change behavior slightly as it adds the HPD signal pulse to the EDID probe path, but Archit has had a patch to add HPD signal pulse to the EDID probe path before, so this should address the cases where that helped. Another difference is that regcache_mark_dirty() is also called in the power off path once EDID is probed. Cc: David Airlie <airlied(a)linux.ie> Cc: Archit Taneja <architt(a)codeaurora.org> Cc: Wolfram Sang <wsa+renesas(a)sang-engineering.com> Cc: Lars-Peter Clausen <lars(a)metafoo.de> Cc: Laurent Pinchart <laurent.pinchart(a)ideasonboard.com> Cc: dri-devel(a)lists.freedesktop.org Reviewed-by: Laurent Pinchart <laurent.pinchart(a)ideasonboard.com> Tested-by: Laurent Pinchart <laurent.pinchart(a)ideasonboard.com> Signed-off-by: John Stultz <john.stultz(a)linaro.org> Signed-off-by: Archit Taneja <architt(a)codeaurora.org> Link: http://patchwork.freedesktop.org/patch/msgid/1484614372-15342-6-git-send-em… Signed-off-by: Nhan Nguyen <nhan.nguyen.yb(a)renesas.com> Signed-off-by: Greg Kroah-Hartman <gregkh(a)linuxfoundation.org> --- drivers/gpu/drm/bridge/adv7511/adv7511_drv.c | 17 +++-------------- 1 file changed, 3 insertions(+), 14 deletions(-) --- a/drivers/gpu/drm/bridge/adv7511/adv7511_drv.c +++ b/drivers/gpu/drm/bridge/adv7511/adv7511_drv.c @@ -573,24 +573,13 @@ static int adv7511_get_modes(struct adv7 unsigned int count; /* Reading the EDID only works if the device is powered */ - if (!adv7511->powered) { - regmap_update_bits(adv7511->regmap, ADV7511_REG_POWER, - ADV7511_POWER_POWER_DOWN, 0); - if (adv7511->i2c_main->irq) { - regmap_write(adv7511->regmap, ADV7511_REG_INT_ENABLE(0), - ADV7511_INT0_EDID_READY); - regmap_write(adv7511->regmap, ADV7511_REG_INT_ENABLE(1), - ADV7511_INT1_DDC_ERROR); - } - adv7511->current_edid_segment = -1; - } + if (!adv7511->powered) + __adv7511_power_on(adv7511); edid = drm_do_get_edid(connector, adv7511_get_edid_block, adv7511); if (!adv7511->powered) - regmap_update_bits(adv7511->regmap, ADV7511_REG_POWER, - ADV7511_POWER_POWER_DOWN, - ADV7511_POWER_POWER_DOWN); + __adv7511_power_off(adv7511); kfree(adv7511->edid); adv7511->edid = edid; Patches currently in stable-queue which might be from john.stultz(a)linaro.org are queue-4.9/drm-bridge-adv7511-re-write-the-i2c-address-before-edid-probing.patch queue-4.9/drm-bridge-adv7511-rework-adv7511_power_on-off-so-they-can-be-reused-internally.patch queue-4.9/drm-bridge-adv7511-reuse-__adv7511_power_on-off-when-probing-edid.patch

7 years, 11 months

1
0
0 0

[Linux-stable-mirror] Patch "drm/bridge: adv7511: Re-write the i2c address before EDID probing" has been added to the 4.9-stable tree

by gregkh＠linuxfoundation.org

This is a note to let you know that I've just added the patch titled drm/bridge: adv7511: Re-write the i2c address before EDID probing to the 4.9-stable tree which can be found at: http://www.kernel.org/git/?p=linux/kernel/git/stable/stable-queue.git;a=sum… The filename of the patch is: drm-bridge-adv7511-re-write-the-i2c-address-before-edid-probing.patch and it can be found in the queue-4.9 subdirectory. If you, or anyone else, feels it should not be added to the stable tree, please let <stable(a)vger.kernel.org> know about it. >From 3587c856675c45809010c2cee5b21096f6e8e938 Mon Sep 17 00:00:00 2001 From: John Stultz <john.stultz(a)linaro.org> Date: Mon, 16 Jan 2017 16:52:52 -0800 Subject: drm/bridge: adv7511: Re-write the i2c address before EDID probing From: John Stultz <john.stultz(a)linaro.org> commit 3587c856675c45809010c2cee5b21096f6e8e938 upstream. I've found that by just turning the chip on and off via the POWER_DOWN register, I end up getting i2c_transfer errors on HiKey. Investigating further, it turns out that some of the register state in hardware is getting lost, as the device registers are reset when the chip is powered down. Thus this patch simply re-writes the i2c address to the ADV7511_REG_EDID_I2C_ADDR register to ensure its properly set before we try to read the EDID data. Cc: David Airlie <airlied(a)linux.ie> Cc: Archit Taneja <architt(a)codeaurora.org> Cc: Wolfram Sang <wsa+renesas(a)sang-engineering.com> Cc: Lars-Peter Clausen <lars(a)metafoo.de> Cc: Laurent Pinchart <laurent.pinchart(a)ideasonboard.com> Cc: dri-devel(a)lists.freedesktop.org Reviewed-by: Laurent Pinchart <laurent.pinchart(a)ideasonboard.com> Tested-by: Laurent Pinchart <laurent.pinchart(a)ideasonboard.com> Signed-off-by: John Stultz <john.stultz(a)linaro.org> Signed-off-by: Archit Taneja <architt(a)codeaurora.org> Link: http://patchwork.freedesktop.org/patch/msgid/1484614372-15342-7-git-send-em… Signed-off-by: Nhan Nguyen <nhan.nguyen.yb(a)renesas.com> Signed-off-by: Greg Kroah-Hartman <gregkh(a)linuxfoundation.org> --- drivers/gpu/drm/bridge/adv7511/adv7511_drv.c | 10 +++++++++- 1 file changed, 9 insertions(+), 1 deletion(-) --- a/drivers/gpu/drm/bridge/adv7511/adv7511_drv.c +++ b/drivers/gpu/drm/bridge/adv7511/adv7511_drv.c @@ -573,9 +573,17 @@ static int adv7511_get_modes(struct adv7 unsigned int count; /* Reading the EDID only works if the device is powered */ - if (!adv7511->powered) + if (!adv7511->powered) { + unsigned int edid_i2c_addr = + (adv7511->i2c_main->addr << 1) + 4; + __adv7511_power_on(adv7511); + /* Reset the EDID_I2C_ADDR register as it might be cleared */ + regmap_write(adv7511->regmap, ADV7511_REG_EDID_I2C_ADDR, + edid_i2c_addr); + } + edid = drm_do_get_edid(connector, adv7511_get_edid_block, adv7511); if (!adv7511->powered) Patches currently in stable-queue which might be from john.stultz(a)linaro.org are queue-4.9/drm-bridge-adv7511-re-write-the-i2c-address-before-edid-probing.patch queue-4.9/drm-bridge-adv7511-rework-adv7511_power_on-off-so-they-can-be-reused-internally.patch queue-4.9/drm-bridge-adv7511-reuse-__adv7511_power_on-off-when-probing-edid.patch

7 years, 11 months

1
0
0 0

[Linux-stable-mirror] Patch "rbd: use GFP_NOIO for parent stat and data requests" has been added to the 4.4-stable tree

by gregkh＠linuxfoundation.org

This is a note to let you know that I've just added the patch titled rbd: use GFP_NOIO for parent stat and data requests to the 4.4-stable tree which can be found at: http://www.kernel.org/git/?p=linux/kernel/git/stable/stable-queue.git;a=sum… The filename of the patch is: rbd-use-gfp_noio-for-parent-stat-and-data-requests.patch and it can be found in the queue-4.4 subdirectory. If you, or anyone else, feels it should not be added to the stable tree, please let <stable(a)vger.kernel.org> know about it. >From 1e37f2f84680fa7f8394fd444b6928e334495ccc Mon Sep 17 00:00:00 2001 From: Ilya Dryomov <idryomov(a)gmail.com> Date: Mon, 6 Nov 2017 11:33:36 +0100 Subject: rbd: use GFP_NOIO for parent stat and data requests From: Ilya Dryomov <idryomov(a)gmail.com> commit 1e37f2f84680fa7f8394fd444b6928e334495ccc upstream. rbd_img_obj_exists_submit() and rbd_img_obj_parent_read_full() are on the writeback path for cloned images -- we attempt a stat on the parent object to see if it exists and potentially read it in to call copyup. GFP_NOIO should be used instead of GFP_KERNEL here. Link: http://tracker.ceph.com/issues/22014 Signed-off-by: Ilya Dryomov <idryomov(a)gmail.com> Reviewed-by: David Disseldorp <ddiss(a)suse.de> [idryomov(a)gmail.com: backport to < 4.9: context] Signed-off-by: Greg Kroah-Hartman <gregkh(a)linuxfoundation.org> --- drivers/block/rbd.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) --- a/drivers/block/rbd.c +++ b/drivers/block/rbd.c @@ -2736,7 +2736,7 @@ static int rbd_img_obj_parent_read_full( * from the parent. */ page_count = (u32)calc_pages_for(0, length); - pages = ceph_alloc_page_vector(page_count, GFP_KERNEL); + pages = ceph_alloc_page_vector(page_count, GFP_NOIO); if (IS_ERR(pages)) { result = PTR_ERR(pages); pages = NULL; @@ -2863,7 +2863,7 @@ static int rbd_img_obj_exists_submit(str */ size = sizeof (__le64) + sizeof (__le32) + sizeof (__le32); page_count = (u32)calc_pages_for(0, size); - pages = ceph_alloc_page_vector(page_count, GFP_KERNEL); + pages = ceph_alloc_page_vector(page_count, GFP_NOIO); if (IS_ERR(pages)) return PTR_ERR(pages); Patches currently in stable-queue which might be from idryomov(a)gmail.com are queue-4.4/rbd-use-gfp_noio-for-parent-stat-and-data-requests.patch

7 years, 11 months

1
0
0 0

[Linux-stable-mirror] [PATCH 1/2] KEYS: trusted: sanitize all key material

by Eric Biggers

commit ee618b4619b72527aaed765f0f0b74072b281159 upstream. [Please apply to 3.18-stable.] As the previous patch did for encrypted-keys, zero sensitive any potentially sensitive data related to the "trusted" key type before it is freed. Notably, we were not zeroing the tpm_buf structures in which the actual key is stored for TPM seal and unseal, nor were we zeroing the trusted_key_payload in certain error paths. Cc: Mimi Zohar <zohar(a)linux.vnet.ibm.com> Cc: David Safford <safford(a)us.ibm.com> Signed-off-by: Eric Biggers <ebiggers(a)google.com> Signed-off-by: David Howells <dhowells(a)redhat.com> Signed-off-by: James Morris <james.l.morris(a)oracle.com> --- security/keys/trusted.c | 49 ++++++++++++++++++++++--------------------------- 1 file changed, 22 insertions(+), 27 deletions(-) diff --git a/security/keys/trusted.c b/security/keys/trusted.c index aeb38f1a12e7..917453895cbc 100644 --- a/security/keys/trusted.c +++ b/security/keys/trusted.c @@ -69,7 +69,7 @@ static int TSS_sha1(const unsigned char *data, unsigned int datalen, } ret = crypto_shash_digest(&sdesc->shash, data, datalen, digest); - kfree(sdesc); + kzfree(sdesc); return ret; } @@ -113,7 +113,7 @@ static int TSS_rawhmac(unsigned char *digest, const unsigned char *key, if (!ret) ret = crypto_shash_final(&sdesc->shash, digest); out: - kfree(sdesc); + kzfree(sdesc); return ret; } @@ -164,7 +164,7 @@ static int TSS_authhmac(unsigned char *digest, const unsigned char *key, paramdigest, TPM_NONCE_SIZE, h1, TPM_NONCE_SIZE, h2, 1, &c, 0, 0); out: - kfree(sdesc); + kzfree(sdesc); return ret; } @@ -245,7 +245,7 @@ static int TSS_checkhmac1(unsigned char *buffer, if (memcmp(testhmac, authdata, SHA1_DIGEST_SIZE)) ret = -EINVAL; out: - kfree(sdesc); + kzfree(sdesc); return ret; } @@ -346,7 +346,7 @@ static int TSS_checkhmac2(unsigned char *buffer, if (memcmp(testhmac2, authdata2, SHA1_DIGEST_SIZE)) ret = -EINVAL; out: - kfree(sdesc); + kzfree(sdesc); return ret; } @@ -563,7 +563,7 @@ static int tpm_seal(struct tpm_buf *tb, uint16_t keytype, *bloblen = storedsize; } out: - kfree(td); + kzfree(td); return ret; } @@ -677,7 +677,7 @@ static int key_seal(struct trusted_key_payload *p, if (ret < 0) pr_info("trusted_key: srkseal failed (%d)\n", ret); - kfree(tb); + kzfree(tb); return ret; } @@ -702,7 +702,7 @@ static int key_unseal(struct trusted_key_payload *p, /* pull migratable flag out of sealed key */ p->migratable = p->key[--p->key_len]; - kfree(tb); + kzfree(tb); return ret; } @@ -961,12 +961,12 @@ static int trusted_instantiate(struct key *key, if (!ret && options->pcrlock) ret = pcrlock(options->pcrlock); out: - kfree(datablob); - kfree(options); + kzfree(datablob); + kzfree(options); if (!ret) rcu_assign_keypointer(key, payload); else - kfree(payload); + kzfree(payload); return ret; } @@ -975,8 +975,7 @@ static void trusted_rcu_free(struct rcu_head *rcu) struct trusted_key_payload *p; p = container_of(rcu, struct trusted_key_payload, rcu); - memset(p->key, 0, p->key_len); - kfree(p); + kzfree(p); } /* @@ -1018,9 +1017,10 @@ static int trusted_update(struct key *key, struct key_preparsed_payload *prep) ret = datablob_parse(datablob, new_p, new_o); if (ret != Opt_update) { ret = -EINVAL; - kfree(new_p); + kzfree(new_p); goto out; } + /* copy old key values, and reseal with new pcrs */ new_p->migratable = p->migratable; new_p->key_len = p->key_len; @@ -1031,22 +1031,22 @@ static int trusted_update(struct key *key, struct key_preparsed_payload *prep) ret = key_seal(new_p, new_o); if (ret < 0) { pr_info("trusted_key: key_seal failed (%d)\n", ret); - kfree(new_p); + kzfree(new_p); goto out; } if (new_o->pcrlock) { ret = pcrlock(new_o->pcrlock); if (ret < 0) { pr_info("trusted_key: pcrlock failed (%d)\n", ret); - kfree(new_p); + kzfree(new_p); goto out; } } rcu_assign_keypointer(key, new_p); call_rcu(&p->rcu, trusted_rcu_free); out: - kfree(datablob); - kfree(new_o); + kzfree(datablob); + kzfree(new_o); return ret; } @@ -1075,24 +1075,19 @@ static long trusted_read(const struct key *key, char __user *buffer, for (i = 0; i < p->blob_len; i++) bufp = hex_byte_pack(bufp, p->blob[i]); if ((copy_to_user(buffer, ascii_buf, 2 * p->blob_len)) != 0) { - kfree(ascii_buf); + kzfree(ascii_buf); return -EFAULT; } - kfree(ascii_buf); + kzfree(ascii_buf); return 2 * p->blob_len; } /* - * trusted_destroy - before freeing the key, clear the decrypted data + * trusted_destroy - clear and free the key's payload */ static void trusted_destroy(struct key *key) { - struct trusted_key_payload *p = key->payload.data; - - if (!p) - return; - memset(p->key, 0, p->key_len); - kfree(key->payload.data); + kzfree(key->payload.data); } struct key_type key_type_trusted = { -- 2.15.0.448.gf294e3d99a-goog

7 years, 11 months

2
2
0 0

[Linux-stable-mirror] Patch "rbd: use GFP_NOIO for parent stat and data requests" has been added to the 3.18-stable tree

by gregkh＠linuxfoundation.org

This is a note to let you know that I've just added the patch titled rbd: use GFP_NOIO for parent stat and data requests to the 3.18-stable tree which can be found at: http://www.kernel.org/git/?p=linux/kernel/git/stable/stable-queue.git;a=sum… The filename of the patch is: rbd-use-gfp_noio-for-parent-stat-and-data-requests.patch and it can be found in the queue-3.18 subdirectory. If you, or anyone else, feels it should not be added to the stable tree, please let <stable(a)vger.kernel.org> know about it. >From 1e37f2f84680fa7f8394fd444b6928e334495ccc Mon Sep 17 00:00:00 2001 From: Ilya Dryomov <idryomov(a)gmail.com> Date: Mon, 6 Nov 2017 11:33:36 +0100 Subject: rbd: use GFP_NOIO for parent stat and data requests From: Ilya Dryomov <idryomov(a)gmail.com> commit 1e37f2f84680fa7f8394fd444b6928e334495ccc upstream. rbd_img_obj_exists_submit() and rbd_img_obj_parent_read_full() are on the writeback path for cloned images -- we attempt a stat on the parent object to see if it exists and potentially read it in to call copyup. GFP_NOIO should be used instead of GFP_KERNEL here. Link: http://tracker.ceph.com/issues/22014 Signed-off-by: Ilya Dryomov <idryomov(a)gmail.com> Reviewed-by: David Disseldorp <ddiss(a)suse.de> [idryomov(a)gmail.com: backport to < 4.9: context] Signed-off-by: Greg Kroah-Hartman <gregkh(a)linuxfoundation.org> --- drivers/block/rbd.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) --- a/drivers/block/rbd.c +++ b/drivers/block/rbd.c @@ -2700,7 +2700,7 @@ static int rbd_img_obj_parent_read_full( * from the parent. */ page_count = (u32)calc_pages_for(0, length); - pages = ceph_alloc_page_vector(page_count, GFP_KERNEL); + pages = ceph_alloc_page_vector(page_count, GFP_NOIO); if (IS_ERR(pages)) { result = PTR_ERR(pages); pages = NULL; @@ -2827,7 +2827,7 @@ static int rbd_img_obj_exists_submit(str */ size = sizeof (__le64) + sizeof (__le32) + sizeof (__le32); page_count = (u32)calc_pages_for(0, size); - pages = ceph_alloc_page_vector(page_count, GFP_KERNEL); + pages = ceph_alloc_page_vector(page_count, GFP_NOIO); if (IS_ERR(pages)) return PTR_ERR(pages); Patches currently in stable-queue which might be from idryomov(a)gmail.com are queue-3.18/rbd-use-gfp_noio-for-parent-stat-and-data-requests.patch

7 years, 11 months

1
0
0 0

[Linux-stable-mirror] Patch "KEYS: trusted: fix writing past end of buffer in trusted_read()" has been added to the 3.18-stable tree

by gregkh＠linuxfoundation.org

This is a note to let you know that I've just added the patch titled KEYS: trusted: fix writing past end of buffer in trusted_read() to the 3.18-stable tree which can be found at: http://www.kernel.org/git/?p=linux/kernel/git/stable/stable-queue.git;a=sum… The filename of the patch is: keys-trusted-fix-writing-past-end-of-buffer-in-trusted_read.patch and it can be found in the queue-3.18 subdirectory. If you, or anyone else, feels it should not be added to the stable tree, please let <stable(a)vger.kernel.org> know about it. >From a3c812f7cfd80cf51e8f5b7034f7418f6beb56c1 Mon Sep 17 00:00:00 2001 From: Eric Biggers <ebiggers(a)google.com> Date: Thu, 2 Nov 2017 00:47:12 +0000 Subject: KEYS: trusted: fix writing past end of buffer in trusted_read() From: Eric Biggers <ebiggers(a)google.com> commit a3c812f7cfd80cf51e8f5b7034f7418f6beb56c1 upstream. When calling keyctl_read() on a key of type "trusted", if the user-supplied buffer was too small, the kernel ignored the buffer length and just wrote past the end of the buffer, potentially corrupting userspace memory. Fix it by instead returning the size required, as per the documentation for keyctl_read(). We also don't even fill the buffer at all in this case, as this is slightly easier to implement than doing a short read, and either behavior appears to be permitted. It also makes it match the behavior of the "encrypted" key type. Fixes: d00a1c72f7f4 ("keys: add new trusted key-type") Reported-by: Ben Hutchings <ben(a)decadent.org.uk> Cc: <stable(a)vger.kernel.org> # v2.6.38+ Signed-off-by: Eric Biggers <ebiggers(a)google.com> Signed-off-by: David Howells <dhowells(a)redhat.com> Reviewed-by: Mimi Zohar <zohar(a)linux.vnet.ibm.com> Reviewed-by: James Morris <james.l.morris(a)oracle.com> Signed-off-by: James Morris <james.l.morris(a)oracle.com> Signed-off-by: Greg Kroah-Hartman <gregkh(a)linuxfoundation.org> --- security/keys/trusted.c | 23 ++++++++++++----------- 1 file changed, 12 insertions(+), 11 deletions(-) --- a/security/keys/trusted.c +++ b/security/keys/trusted.c @@ -1065,20 +1065,21 @@ static long trusted_read(const struct ke p = rcu_dereference_key(key); if (!p) return -EINVAL; - if (!buffer || buflen <= 0) - return 2 * p->blob_len; - ascii_buf = kmalloc(2 * p->blob_len, GFP_KERNEL); - if (!ascii_buf) - return -ENOMEM; - bufp = ascii_buf; - for (i = 0; i < p->blob_len; i++) - bufp = hex_byte_pack(bufp, p->blob[i]); - if ((copy_to_user(buffer, ascii_buf, 2 * p->blob_len)) != 0) { + if (buffer && buflen >= 2 * p->blob_len) { + ascii_buf = kmalloc(2 * p->blob_len, GFP_KERNEL); + if (!ascii_buf) + return -ENOMEM; + + bufp = ascii_buf; + for (i = 0; i < p->blob_len; i++) + bufp = hex_byte_pack(bufp, p->blob[i]); + if (copy_to_user(buffer, ascii_buf, 2 * p->blob_len) != 0) { + kzfree(ascii_buf); + return -EFAULT; + } kzfree(ascii_buf); - return -EFAULT; } - kzfree(ascii_buf); return 2 * p->blob_len; } Patches currently in stable-queue which might be from ebiggers(a)google.com are queue-3.18/keys-trusted-sanitize-all-key-material.patch queue-3.18/keys-trusted-fix-writing-past-end-of-buffer-in-trusted_read.patch queue-3.18/keys-fix-null-pointer-dereference-during-asn.1-parsing.patch

7 years, 11 months

1
0
0 0

[Linux-stable-mirror] Backport of 1e37f2f84680

by Ilya Dryomov

Hi stable, Please apply the following backport of 1e37f2f84680 ("rbd: use GFP_NOIO for parent stat and data requests") to 4.4, 4.1 and earlier kernels. Thanks, Ilya

7 years, 11 months

2
2
0 0

[Linux-stable-mirror] Patch "rbd: use GFP_NOIO for parent stat and data requests" has been added to the 4.9-stable tree

by gregkh＠linuxfoundation.org

This is a note to let you know that I've just added the patch titled rbd: use GFP_NOIO for parent stat and data requests to the 4.9-stable tree which can be found at: http://www.kernel.org/git/?p=linux/kernel/git/stable/stable-queue.git;a=sum… The filename of the patch is: rbd-use-gfp_noio-for-parent-stat-and-data-requests.patch and it can be found in the queue-4.9 subdirectory. If you, or anyone else, feels it should not be added to the stable tree, please let <stable(a)vger.kernel.org> know about it. >From 1e37f2f84680fa7f8394fd444b6928e334495ccc Mon Sep 17 00:00:00 2001 From: Ilya Dryomov <idryomov(a)gmail.com> Date: Mon, 6 Nov 2017 11:33:36 +0100 Subject: rbd: use GFP_NOIO for parent stat and data requests From: Ilya Dryomov <idryomov(a)gmail.com> commit 1e37f2f84680fa7f8394fd444b6928e334495ccc upstream. rbd_img_obj_exists_submit() and rbd_img_obj_parent_read_full() are on the writeback path for cloned images -- we attempt a stat on the parent object to see if it exists and potentially read it in to call copyup. GFP_NOIO should be used instead of GFP_KERNEL here. Link: http://tracker.ceph.com/issues/22014 Signed-off-by: Ilya Dryomov <idryomov(a)gmail.com> Reviewed-by: David Disseldorp <ddiss(a)suse.de> Signed-off-by: Greg Kroah-Hartman <gregkh(a)linuxfoundation.org> --- drivers/block/rbd.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) --- a/drivers/block/rbd.c +++ b/drivers/block/rbd.c @@ -2788,7 +2788,7 @@ static int rbd_img_obj_parent_read_full( * from the parent. */ page_count = (u32)calc_pages_for(0, length); - pages = ceph_alloc_page_vector(page_count, GFP_KERNEL); + pages = ceph_alloc_page_vector(page_count, GFP_NOIO); if (IS_ERR(pages)) { result = PTR_ERR(pages); pages = NULL; @@ -2922,7 +2922,7 @@ static int rbd_img_obj_exists_submit(str */ size = sizeof (__le64) + sizeof (__le32) + sizeof (__le32); page_count = (u32)calc_pages_for(0, size); - pages = ceph_alloc_page_vector(page_count, GFP_KERNEL); + pages = ceph_alloc_page_vector(page_count, GFP_NOIO); if (IS_ERR(pages)) { ret = PTR_ERR(pages); goto fail_stat_request; Patches currently in stable-queue which might be from idryomov(a)gmail.com are queue-4.9/rbd-use-gfp_noio-for-parent-stat-and-data-requests.patch

7 years, 11 months

1
0
0 0

[Linux-stable-mirror] Patch "MIPS: BMIPS: Fix missing cbr address" has been added to the 4.9-stable tree

by gregkh＠linuxfoundation.org

This is a note to let you know that I've just added the patch titled MIPS: BMIPS: Fix missing cbr address to the 4.9-stable tree which can be found at: http://www.kernel.org/git/?p=linux/kernel/git/stable/stable-queue.git;a=sum… The filename of the patch is: mips-bmips-fix-missing-cbr-address.patch and it can be found in the queue-4.9 subdirectory. If you, or anyone else, feels it should not be added to the stable tree, please let <stable(a)vger.kernel.org> know about it. >From ea4b3afe1eac8f88bb453798a084fba47a1f155a Mon Sep 17 00:00:00 2001 From: Jaedon Shin <jaedon.shin(a)gmail.com> Date: Fri, 16 Jun 2017 20:03:01 +0900 Subject: MIPS: BMIPS: Fix missing cbr address From: Jaedon Shin <jaedon.shin(a)gmail.com> commit ea4b3afe1eac8f88bb453798a084fba47a1f155a upstream. Fix NULL pointer access in BMIPS3300 RAC flush. Fixes: 738a3f79027b ("MIPS: BMIPS: Add early CPU initialization code") Signed-off-by: Jaedon Shin <jaedon.shin(a)gmail.com> Reviewed-by: Florian Fainelli <f.fainelli(a)gmail.com> Cc: Kevin Cernekee <cernekee(a)gmail.com> Cc: linux-mips(a)linux-mips.org Patchwork: https://patchwork.linux-mips.org/patch/16423/ Signed-off-by: James Hogan <jhogan(a)kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh(a)linuxfoundation.org> --- arch/mips/kernel/smp-bmips.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) --- a/arch/mips/kernel/smp-bmips.c +++ b/arch/mips/kernel/smp-bmips.c @@ -587,11 +587,11 @@ void __init bmips_cpu_setup(void) /* Flush and enable RAC */ cfg = __raw_readl(cbr + BMIPS_RAC_CONFIG); - __raw_writel(cfg | 0x100, BMIPS_RAC_CONFIG); + __raw_writel(cfg | 0x100, cbr + BMIPS_RAC_CONFIG); __raw_readl(cbr + BMIPS_RAC_CONFIG); cfg = __raw_readl(cbr + BMIPS_RAC_CONFIG); - __raw_writel(cfg | 0xf, BMIPS_RAC_CONFIG); + __raw_writel(cfg | 0xf, cbr + BMIPS_RAC_CONFIG); __raw_readl(cbr + BMIPS_RAC_CONFIG); cfg = __raw_readl(cbr + BMIPS_RAC_ADDRESS_RANGE); Patches currently in stable-queue which might be from jaedon.shin(a)gmail.com are queue-4.9/mips-bmips-fix-missing-cbr-address.patch

7 years, 11 months

1
0
0 0

[Linux-stable-mirror] Patch "MIPS: AR7: Ensure that serial ports are properly set up" has been added to the 4.9-stable tree

by gregkh＠linuxfoundation.org

This is a note to let you know that I've just added the patch titled MIPS: AR7: Ensure that serial ports are properly set up to the 4.9-stable tree which can be found at: http://www.kernel.org/git/?p=linux/kernel/git/stable/stable-queue.git;a=sum… The filename of the patch is: mips-ar7-ensure-that-serial-ports-are-properly-set-up.patch and it can be found in the queue-4.9 subdirectory. If you, or anyone else, feels it should not be added to the stable tree, please let <stable(a)vger.kernel.org> know about it. >From b084116f8587b222a2c5ef6dcd846f40f24b9420 Mon Sep 17 00:00:00 2001 From: Oswald Buddenhagen <oswald.buddenhagen(a)gmx.de> Date: Sun, 29 Oct 2017 16:27:20 +0100 Subject: MIPS: AR7: Ensure that serial ports are properly set up From: Oswald Buddenhagen <oswald.buddenhagen(a)gmx.de> commit b084116f8587b222a2c5ef6dcd846f40f24b9420 upstream. Without UPF_FIXED_TYPE, the data from the PORT_AR7 uart_config entry is never copied, resulting in a dead port. Fixes: 154615d55459 ("MIPS: AR7: Use correct UART port type") Signed-off-by: Oswald Buddenhagen <oswald.buddenhagen(a)gmx.de> [jonas.gorski: add Fixes tag] Signed-off-by: Jonas Gorski <jonas.gorski(a)gmail.com> Reviewed-by: Florian Fainelli <f.fainelli(a)gmail.com> Cc: Ralf Baechle <ralf(a)linux-mips.org> Cc: Greg Kroah-Hartman <gregkh(a)linuxfoundation.org> Cc: Yoshihiro YUNOMAE <yoshihiro.yunomae.ez(a)hitachi.com> Cc: Nicolas Schichan <nschichan(a)freebox.fr> Cc: Oswald Buddenhagen <oswald.buddenhagen(a)gmx.de> Cc: linux-mips(a)linux-mips.org Cc: linux-serial(a)vger.kernel.org Patchwork: https://patchwork.linux-mips.org/patch/17543/ Signed-off-by: James Hogan <jhogan(a)kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh(a)linuxfoundation.org> --- arch/mips/ar7/platform.c | 1 + 1 file changed, 1 insertion(+) --- a/arch/mips/ar7/platform.c +++ b/arch/mips/ar7/platform.c @@ -576,6 +576,7 @@ static int __init ar7_register_uarts(voi uart_port.type = PORT_AR7; uart_port.uartclk = clk_get_rate(bus_clk) / 2; uart_port.iotype = UPIO_MEM32; + uart_port.flags = UPF_FIXED_TYPE; uart_port.regshift = 2; uart_port.line = 0; Patches currently in stable-queue which might be from oswald.buddenhagen(a)gmx.de are queue-4.9/mips-ar7-ensure-that-serial-ports-are-properly-set-up.patch

7 years, 11 months

1
0
0 0

[Linux-stable-mirror] Patch "MIPS: AR7: Defer registration of GPIO" has been added to the 4.9-stable tree

by gregkh＠linuxfoundation.org

This is a note to let you know that I've just added the patch titled MIPS: AR7: Defer registration of GPIO to the 4.9-stable tree which can be found at: http://www.kernel.org/git/?p=linux/kernel/git/stable/stable-queue.git;a=sum… The filename of the patch is: mips-ar7-defer-registration-of-gpio.patch and it can be found in the queue-4.9 subdirectory. If you, or anyone else, feels it should not be added to the stable tree, please let <stable(a)vger.kernel.org> know about it. >From e6b03ab63b4d270e0249f96536fde632409dc1dc Mon Sep 17 00:00:00 2001 From: Jonas Gorski <jonas.gorski(a)gmail.com> Date: Sun, 29 Oct 2017 16:27:19 +0100 Subject: MIPS: AR7: Defer registration of GPIO From: Jonas Gorski <jonas.gorski(a)gmail.com> commit e6b03ab63b4d270e0249f96536fde632409dc1dc upstream. When called from prom init code, ar7_gpio_init() will fail as it will call gpiochip_add() which relies on a working kmalloc() to alloc the gpio_desc array and kmalloc is not useable yet at prom init time. Move ar7_gpio_init() to ar7_register_devices() (a device_initcall) where kmalloc works. Fixes: 14e85c0e69d5 ("gpio: remove gpio_descs global array") Signed-off-by: Jonas Gorski <jonas.gorski(a)gmail.com> Reviewed-by: Florian Fainelli <f.fainelli(a)gmail.com> Cc: Ralf Baechle <ralf(a)linux-mips.org> Cc: Greg Kroah-Hartman <gregkh(a)linuxfoundation.org> Cc: Yoshihiro YUNOMAE <yoshihiro.yunomae.ez(a)hitachi.com> Cc: Nicolas Schichan <nschichan(a)freebox.fr> Cc: linux-mips(a)linux-mips.org Cc: linux-serial(a)vger.kernel.org Patchwork: https://patchwork.linux-mips.org/patch/17542/ Signed-off-by: James Hogan <jhogan(a)kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh(a)linuxfoundation.org> --- arch/mips/ar7/platform.c | 4 ++++ arch/mips/ar7/prom.c | 2 -- 2 files changed, 4 insertions(+), 2 deletions(-) --- a/arch/mips/ar7/platform.c +++ b/arch/mips/ar7/platform.c @@ -654,6 +654,10 @@ static int __init ar7_register_devices(v u32 val; int res; + res = ar7_gpio_init(); + if (res) + pr_warn("unable to register gpios: %d\n", res); + res = ar7_register_uarts(); if (res) pr_err("unable to setup uart(s): %d\n", res); --- a/arch/mips/ar7/prom.c +++ b/arch/mips/ar7/prom.c @@ -246,8 +246,6 @@ void __init prom_init(void) ar7_init_cmdline(fw_arg0, (char **)fw_arg1); ar7_init_env((struct env_var *)fw_arg2); console_config(); - - ar7_gpio_init(); } #define PORT(offset) (KSEG1ADDR(AR7_REGS_UART0 + (offset * 4))) Patches currently in stable-queue which might be from jonas.gorski(a)gmail.com are queue-4.9/mips-ar7-ensure-that-serial-ports-are-properly-set-up.patch queue-4.9/mips-ar7-defer-registration-of-gpio.patch

7 years, 11 months

1
0
0 0

[Linux-stable-mirror] Patch "Input: elan_i2c - add ELAN060C to the ACPI table" has been added to the 4.9-stable tree

by gregkh＠linuxfoundation.org

This is a note to let you know that I've just added the patch titled Input: elan_i2c - add ELAN060C to the ACPI table to the 4.9-stable tree which can be found at: http://www.kernel.org/git/?p=linux/kernel/git/stable/stable-queue.git;a=sum… The filename of the patch is: input-elan_i2c-add-elan060c-to-the-acpi-table.patch and it can be found in the queue-4.9 subdirectory. If you, or anyone else, feels it should not be added to the stable tree, please let <stable(a)vger.kernel.org> know about it. >From cdea6a30c2689cc33b34c6691b57cca277f0c5dc Mon Sep 17 00:00:00 2001 From: Kai-Heng Feng <kai.heng.feng(a)canonical.com> Date: Tue, 7 Nov 2017 16:19:24 -0800 Subject: Input: elan_i2c - add ELAN060C to the ACPI table From: Kai-Heng Feng <kai.heng.feng(a)canonical.com> commit cdea6a30c2689cc33b34c6691b57cca277f0c5dc upstream. ELAN060C touchpad uses elan_i2c as its driver. It can be found on Lenovo ideapad 320-14AST. BugLink: https://bugs.launchpad.net/bugs/1727544 Signed-off-by: Kai-Heng Feng <kai.heng.feng(a)canonical.com> Signed-off-by: Dmitry Torokhov <dmitry.torokhov(a)gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh(a)linuxfoundation.org> --- drivers/input/mouse/elan_i2c_core.c | 1 + 1 file changed, 1 insertion(+) --- a/drivers/input/mouse/elan_i2c_core.c +++ b/drivers/input/mouse/elan_i2c_core.c @@ -1240,6 +1240,7 @@ static const struct acpi_device_id elan_ { "ELAN0605", 0 }, { "ELAN0609", 0 }, { "ELAN060B", 0 }, + { "ELAN060C", 0 }, { "ELAN0611", 0 }, { "ELAN1000", 0 }, { } Patches currently in stable-queue which might be from kai.heng.feng(a)canonical.com are queue-4.9/input-elan_i2c-add-elan060c-to-the-acpi-table.patch

7 years, 11 months

1
0
0 0

[Linux-stable-mirror] Patch "drm/vmwgfx: Fix Ubuntu 17.10 Wayland black screen issue" has been added to the 4.9-stable tree

by gregkh＠linuxfoundation.org

This is a note to let you know that I've just added the patch titled drm/vmwgfx: Fix Ubuntu 17.10 Wayland black screen issue to the 4.9-stable tree which can be found at: http://www.kernel.org/git/?p=linux/kernel/git/stable/stable-queue.git;a=sum… The filename of the patch is: drm-vmwgfx-fix-ubuntu-17.10-wayland-black-screen-issue.patch and it can be found in the queue-4.9 subdirectory. If you, or anyone else, feels it should not be added to the stable tree, please let <stable(a)vger.kernel.org> know about it. >From cef75036c40408ba3bc308bcb00a3d440da713fc Mon Sep 17 00:00:00 2001 From: Sinclair Yeh <syeh(a)vmware.com> Date: Wed, 1 Nov 2017 10:47:05 -0700 Subject: drm/vmwgfx: Fix Ubuntu 17.10 Wayland black screen issue From: Sinclair Yeh <syeh(a)vmware.com> commit cef75036c40408ba3bc308bcb00a3d440da713fc upstream. This is an extension of Commit 7c20d213dd3c ("drm/vmwgfx: Work around mode set failure in 2D VMs") With Wayland desktop and atomic mode set, during the mode setting process there is a moment when two framebuffer sized surfaces are being pinned. This was not an issue with Xorg. Since this only happens during a mode change, there should be no performance impact by increasing allowable mem_size. Signed-off-by: Sinclair Yeh <syeh(a)vmware.com> Reviewed-by: Thomas Hellstrom <thellstrom(a)vmware.com> Signed-off-by: Greg Kroah-Hartman <gregkh(a)linuxfoundation.org> --- drivers/gpu/drm/vmwgfx/vmwgfx_drv.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) --- a/drivers/gpu/drm/vmwgfx/vmwgfx_drv.c +++ b/drivers/gpu/drm/vmwgfx/vmwgfx_drv.c @@ -721,7 +721,7 @@ static int vmw_driver_load(struct drm_de * allocation taken by fbdev */ if (!(dev_priv->capabilities & SVGA_CAP_3D)) - mem_size *= 2; + mem_size *= 3; dev_priv->max_mob_pages = mem_size * 1024 / PAGE_SIZE; dev_priv->prim_bb_mem = Patches currently in stable-queue which might be from syeh(a)vmware.com are queue-4.9/drm-vmwgfx-fix-ubuntu-17.10-wayland-black-screen-issue.patch

7 years, 11 months

1
0
0 0

[Linux-stable-mirror] Patch "ASoC: sun4i-spdif: remove legacy dapm components" has been added to the 4.9-stable tree

by gregkh＠linuxfoundation.org

This is a note to let you know that I've just added the patch titled ASoC: sun4i-spdif: remove legacy dapm components to the 4.9-stable tree which can be found at: http://www.kernel.org/git/?p=linux/kernel/git/stable/stable-queue.git;a=sum… The filename of the patch is: asoc-sun4i-spdif-remove-legacy-dapm-components.patch and it can be found in the queue-4.9 subdirectory. If you, or anyone else, feels it should not be added to the stable tree, please let <stable(a)vger.kernel.org> know about it. >From 96e53c41e1f81c9e9d1ce38d3f28b95668b71dcf Mon Sep 17 00:00:00 2001 From: Marcus Cooper <codekipper(a)gmail.com> Date: Tue, 20 Dec 2016 15:49:13 +0100 Subject: ASoC: sun4i-spdif: remove legacy dapm components From: Marcus Cooper <codekipper(a)gmail.com> commit 96e53c41e1f81c9e9d1ce38d3f28b95668b71dcf upstream. The dapm components are now handled by the ALSA SoC SPDIF DIT driver so can be removed. Signed-off-by: Marcus Cooper <codekipper(a)gmail.com> Acked-by: Maxime Ripard <maxime.ripard(a)free-electrons.com> Signed-off-by: Mark Brown <broonie(a)kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh(a)linuxfoundation.org> --- sound/soc/sunxi/sun4i-spdif.c | 8 -------- 1 file changed, 8 deletions(-) --- a/sound/soc/sunxi/sun4i-spdif.c +++ b/sound/soc/sunxi/sun4i-spdif.c @@ -403,14 +403,6 @@ static struct snd_soc_dai_driver sun4i_s .name = "spdif", }; -static const struct snd_soc_dapm_widget dit_widgets[] = { - SND_SOC_DAPM_OUTPUT("spdif-out"), -}; - -static const struct snd_soc_dapm_route dit_routes[] = { - { "spdif-out", NULL, "Playback" }, -}; - static const struct of_device_id sun4i_spdif_of_match[] = { { .compatible = "allwinner,sun4i-a10-spdif", }, { .compatible = "allwinner,sun6i-a31-spdif", }, Patches currently in stable-queue which might be from codekipper(a)gmail.com are queue-4.9/asoc-sun4i-spdif-remove-legacy-dapm-components.patch queue-4.9/asoc-sunxi-add-bindings-for-sun8i-to-spdif.patch

7 years, 11 months

1
0
0 0

[Linux-stable-mirror] Patch "MIPS: AR7: Ensure that serial ports are properly set up" has been added to the 4.4-stable tree

by gregkh＠linuxfoundation.org

This is a note to let you know that I've just added the patch titled MIPS: AR7: Ensure that serial ports are properly set up to the 4.4-stable tree which can be found at: http://www.kernel.org/git/?p=linux/kernel/git/stable/stable-queue.git;a=sum… The filename of the patch is: mips-ar7-ensure-that-serial-ports-are-properly-set-up.patch and it can be found in the queue-4.4 subdirectory. If you, or anyone else, feels it should not be added to the stable tree, please let <stable(a)vger.kernel.org> know about it. >From b084116f8587b222a2c5ef6dcd846f40f24b9420 Mon Sep 17 00:00:00 2001 From: Oswald Buddenhagen <oswald.buddenhagen(a)gmx.de> Date: Sun, 29 Oct 2017 16:27:20 +0100 Subject: MIPS: AR7: Ensure that serial ports are properly set up From: Oswald Buddenhagen <oswald.buddenhagen(a)gmx.de> commit b084116f8587b222a2c5ef6dcd846f40f24b9420 upstream. Without UPF_FIXED_TYPE, the data from the PORT_AR7 uart_config entry is never copied, resulting in a dead port. Fixes: 154615d55459 ("MIPS: AR7: Use correct UART port type") Signed-off-by: Oswald Buddenhagen <oswald.buddenhagen(a)gmx.de> [jonas.gorski: add Fixes tag] Signed-off-by: Jonas Gorski <jonas.gorski(a)gmail.com> Reviewed-by: Florian Fainelli <f.fainelli(a)gmail.com> Cc: Ralf Baechle <ralf(a)linux-mips.org> Cc: Greg Kroah-Hartman <gregkh(a)linuxfoundation.org> Cc: Yoshihiro YUNOMAE <yoshihiro.yunomae.ez(a)hitachi.com> Cc: Nicolas Schichan <nschichan(a)freebox.fr> Cc: Oswald Buddenhagen <oswald.buddenhagen(a)gmx.de> Cc: linux-mips(a)linux-mips.org Cc: linux-serial(a)vger.kernel.org Patchwork: https://patchwork.linux-mips.org/patch/17543/ Signed-off-by: James Hogan <jhogan(a)kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh(a)linuxfoundation.org> --- arch/mips/ar7/platform.c | 1 + 1 file changed, 1 insertion(+) --- a/arch/mips/ar7/platform.c +++ b/arch/mips/ar7/platform.c @@ -576,6 +576,7 @@ static int __init ar7_register_uarts(voi uart_port.type = PORT_AR7; uart_port.uartclk = clk_get_rate(bus_clk) / 2; uart_port.iotype = UPIO_MEM32; + uart_port.flags = UPF_FIXED_TYPE; uart_port.regshift = 2; uart_port.line = 0; Patches currently in stable-queue which might be from oswald.buddenhagen(a)gmx.de are queue-4.4/mips-ar7-ensure-that-serial-ports-are-properly-set-up.patch

7 years, 11 months

1
0
0 0

[Linux-stable-mirror] Patch "MIPS: AR7: Defer registration of GPIO" has been added to the 4.4-stable tree

by gregkh＠linuxfoundation.org

This is a note to let you know that I've just added the patch titled MIPS: AR7: Defer registration of GPIO to the 4.4-stable tree which can be found at: http://www.kernel.org/git/?p=linux/kernel/git/stable/stable-queue.git;a=sum… The filename of the patch is: mips-ar7-defer-registration-of-gpio.patch and it can be found in the queue-4.4 subdirectory. If you, or anyone else, feels it should not be added to the stable tree, please let <stable(a)vger.kernel.org> know about it. >From e6b03ab63b4d270e0249f96536fde632409dc1dc Mon Sep 17 00:00:00 2001 From: Jonas Gorski <jonas.gorski(a)gmail.com> Date: Sun, 29 Oct 2017 16:27:19 +0100 Subject: MIPS: AR7: Defer registration of GPIO From: Jonas Gorski <jonas.gorski(a)gmail.com> commit e6b03ab63b4d270e0249f96536fde632409dc1dc upstream. When called from prom init code, ar7_gpio_init() will fail as it will call gpiochip_add() which relies on a working kmalloc() to alloc the gpio_desc array and kmalloc is not useable yet at prom init time. Move ar7_gpio_init() to ar7_register_devices() (a device_initcall) where kmalloc works. Fixes: 14e85c0e69d5 ("gpio: remove gpio_descs global array") Signed-off-by: Jonas Gorski <jonas.gorski(a)gmail.com> Reviewed-by: Florian Fainelli <f.fainelli(a)gmail.com> Cc: Ralf Baechle <ralf(a)linux-mips.org> Cc: Greg Kroah-Hartman <gregkh(a)linuxfoundation.org> Cc: Yoshihiro YUNOMAE <yoshihiro.yunomae.ez(a)hitachi.com> Cc: Nicolas Schichan <nschichan(a)freebox.fr> Cc: linux-mips(a)linux-mips.org Cc: linux-serial(a)vger.kernel.org Patchwork: https://patchwork.linux-mips.org/patch/17542/ Signed-off-by: James Hogan <jhogan(a)kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh(a)linuxfoundation.org> --- arch/mips/ar7/platform.c | 4 ++++ arch/mips/ar7/prom.c | 2 -- 2 files changed, 4 insertions(+), 2 deletions(-) --- a/arch/mips/ar7/platform.c +++ b/arch/mips/ar7/platform.c @@ -654,6 +654,10 @@ static int __init ar7_register_devices(v u32 val; int res; + res = ar7_gpio_init(); + if (res) + pr_warn("unable to register gpios: %d\n", res); + res = ar7_register_uarts(); if (res) pr_err("unable to setup uart(s): %d\n", res); --- a/arch/mips/ar7/prom.c +++ b/arch/mips/ar7/prom.c @@ -246,8 +246,6 @@ void __init prom_init(void) ar7_init_cmdline(fw_arg0, (char **)fw_arg1); ar7_init_env((struct env_var *)fw_arg2); console_config(); - - ar7_gpio_init(); } #define PORT(offset) (KSEG1ADDR(AR7_REGS_UART0 + (offset * 4))) Patches currently in stable-queue which might be from jonas.gorski(a)gmail.com are queue-4.4/mips-ar7-ensure-that-serial-ports-are-properly-set-up.patch queue-4.4/mips-ar7-defer-registration-of-gpio.patch

7 years, 11 months

1
0
0 0

[Linux-stable-mirror] Patch "Input: elan_i2c - add ELAN060C to the ACPI table" has been added to the 4.4-stable tree

by gregkh＠linuxfoundation.org

This is a note to let you know that I've just added the patch titled Input: elan_i2c - add ELAN060C to the ACPI table to the 4.4-stable tree which can be found at: http://www.kernel.org/git/?p=linux/kernel/git/stable/stable-queue.git;a=sum… The filename of the patch is: input-elan_i2c-add-elan060c-to-the-acpi-table.patch and it can be found in the queue-4.4 subdirectory. If you, or anyone else, feels it should not be added to the stable tree, please let <stable(a)vger.kernel.org> know about it. >From cdea6a30c2689cc33b34c6691b57cca277f0c5dc Mon Sep 17 00:00:00 2001 From: Kai-Heng Feng <kai.heng.feng(a)canonical.com> Date: Tue, 7 Nov 2017 16:19:24 -0800 Subject: Input: elan_i2c - add ELAN060C to the ACPI table From: Kai-Heng Feng <kai.heng.feng(a)canonical.com> commit cdea6a30c2689cc33b34c6691b57cca277f0c5dc upstream. ELAN060C touchpad uses elan_i2c as its driver. It can be found on Lenovo ideapad 320-14AST. BugLink: https://bugs.launchpad.net/bugs/1727544 Signed-off-by: Kai-Heng Feng <kai.heng.feng(a)canonical.com> Signed-off-by: Dmitry Torokhov <dmitry.torokhov(a)gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh(a)linuxfoundation.org> --- drivers/input/mouse/elan_i2c_core.c | 1 + 1 file changed, 1 insertion(+) --- a/drivers/input/mouse/elan_i2c_core.c +++ b/drivers/input/mouse/elan_i2c_core.c @@ -1240,6 +1240,7 @@ static const struct acpi_device_id elan_ { "ELAN0605", 0 }, { "ELAN0609", 0 }, { "ELAN060B", 0 }, + { "ELAN060C", 0 }, { "ELAN0611", 0 }, { "ELAN1000", 0 }, { } Patches currently in stable-queue which might be from kai.heng.feng(a)canonical.com are queue-4.4/input-elan_i2c-add-elan060c-to-the-acpi-table.patch

7 years, 11 months

1
0
0 0

[Linux-stable-mirror] Patch "drm/vmwgfx: Fix Ubuntu 17.10 Wayland black screen issue" has been added to the 4.4-stable tree

by gregkh＠linuxfoundation.org

This is a note to let you know that I've just added the patch titled drm/vmwgfx: Fix Ubuntu 17.10 Wayland black screen issue to the 4.4-stable tree which can be found at: http://www.kernel.org/git/?p=linux/kernel/git/stable/stable-queue.git;a=sum… The filename of the patch is: drm-vmwgfx-fix-ubuntu-17.10-wayland-black-screen-issue.patch and it can be found in the queue-4.4 subdirectory. If you, or anyone else, feels it should not be added to the stable tree, please let <stable(a)vger.kernel.org> know about it. >From cef75036c40408ba3bc308bcb00a3d440da713fc Mon Sep 17 00:00:00 2001 From: Sinclair Yeh <syeh(a)vmware.com> Date: Wed, 1 Nov 2017 10:47:05 -0700 Subject: drm/vmwgfx: Fix Ubuntu 17.10 Wayland black screen issue From: Sinclair Yeh <syeh(a)vmware.com> commit cef75036c40408ba3bc308bcb00a3d440da713fc upstream. This is an extension of Commit 7c20d213dd3c ("drm/vmwgfx: Work around mode set failure in 2D VMs") With Wayland desktop and atomic mode set, during the mode setting process there is a moment when two framebuffer sized surfaces are being pinned. This was not an issue with Xorg. Since this only happens during a mode change, there should be no performance impact by increasing allowable mem_size. Signed-off-by: Sinclair Yeh <syeh(a)vmware.com> Reviewed-by: Thomas Hellstrom <thellstrom(a)vmware.com> Signed-off-by: Greg Kroah-Hartman <gregkh(a)linuxfoundation.org> --- drivers/gpu/drm/vmwgfx/vmwgfx_drv.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) --- a/drivers/gpu/drm/vmwgfx/vmwgfx_drv.c +++ b/drivers/gpu/drm/vmwgfx/vmwgfx_drv.c @@ -708,7 +708,7 @@ static int vmw_driver_load(struct drm_de * allocation taken by fbdev */ if (!(dev_priv->capabilities & SVGA_CAP_3D)) - mem_size *= 2; + mem_size *= 3; dev_priv->max_mob_pages = mem_size * 1024 / PAGE_SIZE; dev_priv->prim_bb_mem = Patches currently in stable-queue which might be from syeh(a)vmware.com are queue-4.4/drm-vmwgfx-fix-ubuntu-17.10-wayland-black-screen-issue.patch

7 years, 11 months

1
0
0 0

[Linux-stable-mirror] Patch "Revert "x86: CPU: Fix up "cpu MHz" in /proc/cpuinfo"" has been added to the 4.13-stable tree

by gregkh＠linuxfoundation.org

This is a note to let you know that I've just added the patch titled Revert "x86: CPU: Fix up "cpu MHz" in /proc/cpuinfo" to the 4.13-stable tree which can be found at: http://www.kernel.org/git/?p=linux/kernel/git/stable/stable-queue.git;a=sum… The filename of the patch is: revert-x86-cpu-fix-up-cpu-mhz-in-proc-cpuinfo.patch and it can be found in the queue-4.13 subdirectory. If you, or anyone else, feels it should not be added to the stable tree, please let <stable(a)vger.kernel.org> know about it. >From ea0ee33988778fb73e4f45e7c73fb735787e2f32 Mon Sep 17 00:00:00 2001 From: Linus Torvalds <torvalds(a)linux-foundation.org> Date: Fri, 10 Nov 2017 11:19:11 -0800 Subject: Revert "x86: CPU: Fix up "cpu MHz" in /proc/cpuinfo" From: Linus Torvalds <torvalds(a)linux-foundation.org> commit ea0ee33988778fb73e4f45e7c73fb735787e2f32 upstream. This reverts commit 941f5f0f6ef5338814145cf2b813cf1f98873e2f. Sadly, it turns out that we really can't just do the cross-CPU IPI to all CPU's to get their proper frequencies, because it's much too expensive on systems with lots of cores. So we'll have to revert this for now, and revisit it using a smarter model (probably doing one system-wide IPI at open time, and doing all the frequency calculations in parallel). Reported-by: WANG Chao <chao.wang(a)ucloud.cn> Reported-by: Ingo Molnar <mingo(a)kernel.org> Cc: Rafael J Wysocki <rafael.j.wysocki(a)intel.com> Signed-off-by: Linus Torvalds <torvalds(a)linux-foundation.org> Signed-off-by: Greg Kroah-Hartman <gregkh(a)linuxfoundation.org> --- arch/x86/kernel/cpu/Makefile | 2 +- arch/x86/kernel/cpu/aperfmperf.c | 11 ++++------- arch/x86/kernel/cpu/proc.c | 4 +--- 3 files changed, 6 insertions(+), 11 deletions(-) --- a/arch/x86/kernel/cpu/Makefile +++ b/arch/x86/kernel/cpu/Makefile @@ -21,7 +21,7 @@ obj-y += common.o obj-y += rdrand.o obj-y += match.o obj-y += bugs.o -obj-y += aperfmperf.o +obj-$(CONFIG_CPU_FREQ) += aperfmperf.o obj-$(CONFIG_PROC_FS) += proc.o obj-$(CONFIG_X86_FEATURE_NAMES) += capflags.o powerflags.o --- a/arch/x86/kernel/cpu/aperfmperf.c +++ b/arch/x86/kernel/cpu/aperfmperf.c @@ -42,6 +42,10 @@ static void aperfmperf_snapshot_khz(void s64 time_delta = ktime_ms_delta(now, s->time); unsigned long flags; + /* Don't bother re-computing within the cache threshold time. */ + if (time_delta < APERFMPERF_CACHE_THRESHOLD_MS) + return; + local_irq_save(flags); rdmsrl(MSR_IA32_APERF, aperf); rdmsrl(MSR_IA32_MPERF, mperf); @@ -70,7 +74,6 @@ static void aperfmperf_snapshot_khz(void unsigned int arch_freq_get_on_cpu(int cpu) { - s64 time_delta; unsigned int khz; if (!cpu_khz) @@ -79,12 +82,6 @@ unsigned int arch_freq_get_on_cpu(int cp if (!static_cpu_has(X86_FEATURE_APERFMPERF)) return 0; - /* Don't bother re-computing within the cache threshold time. */ - time_delta = ktime_ms_delta(ktime_get(), per_cpu(samples.time, cpu)); - khz = per_cpu(samples.khz, cpu); - if (khz && time_delta < APERFMPERF_CACHE_THRESHOLD_MS) - return khz; - smp_call_function_single(cpu, aperfmperf_snapshot_khz, NULL, 1); khz = per_cpu(samples.khz, cpu); if (khz) --- a/arch/x86/kernel/cpu/proc.c +++ b/arch/x86/kernel/cpu/proc.c @@ -77,11 +77,9 @@ static int show_cpuinfo(struct seq_file seq_printf(m, "microcode\t: 0x%x\n", c->microcode); if (cpu_has(c, X86_FEATURE_TSC)) { - unsigned int freq = arch_freq_get_on_cpu(cpu); + unsigned int freq = cpufreq_quick_get(cpu); if (!freq) - freq = cpufreq_quick_get(cpu); - if (!freq) freq = cpu_khz; seq_printf(m, "cpu MHz\t\t: %u.%03u\n", freq / 1000, (freq % 1000)); Patches currently in stable-queue which might be from torvalds(a)linux-foundation.org are queue-4.13/revert-x86-cpu-fix-up-cpu-mhz-in-proc-cpuinfo.patch

7 years, 11 months

1
0
0 0

[Linux-stable-mirror] Patch "rbd: use GFP_NOIO for parent stat and data requests" has been added to the 4.13-stable tree

by gregkh＠linuxfoundation.org

This is a note to let you know that I've just added the patch titled rbd: use GFP_NOIO for parent stat and data requests to the 4.13-stable tree which can be found at: http://www.kernel.org/git/?p=linux/kernel/git/stable/stable-queue.git;a=sum… The filename of the patch is: rbd-use-gfp_noio-for-parent-stat-and-data-requests.patch and it can be found in the queue-4.13 subdirectory. If you, or anyone else, feels it should not be added to the stable tree, please let <stable(a)vger.kernel.org> know about it. >From 1e37f2f84680fa7f8394fd444b6928e334495ccc Mon Sep 17 00:00:00 2001 From: Ilya Dryomov <idryomov(a)gmail.com> Date: Mon, 6 Nov 2017 11:33:36 +0100 Subject: rbd: use GFP_NOIO for parent stat and data requests From: Ilya Dryomov <idryomov(a)gmail.com> commit 1e37f2f84680fa7f8394fd444b6928e334495ccc upstream. rbd_img_obj_exists_submit() and rbd_img_obj_parent_read_full() are on the writeback path for cloned images -- we attempt a stat on the parent object to see if it exists and potentially read it in to call copyup. GFP_NOIO should be used instead of GFP_KERNEL here. Link: http://tracker.ceph.com/issues/22014 Signed-off-by: Ilya Dryomov <idryomov(a)gmail.com> Reviewed-by: David Disseldorp <ddiss(a)suse.de> Signed-off-by: Greg Kroah-Hartman <gregkh(a)linuxfoundation.org> --- drivers/block/rbd.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) --- a/drivers/block/rbd.c +++ b/drivers/block/rbd.c @@ -2692,7 +2692,7 @@ static int rbd_img_obj_parent_read_full( * from the parent. */ page_count = (u32)calc_pages_for(0, length); - pages = ceph_alloc_page_vector(page_count, GFP_KERNEL); + pages = ceph_alloc_page_vector(page_count, GFP_NOIO); if (IS_ERR(pages)) { result = PTR_ERR(pages); pages = NULL; @@ -2827,7 +2827,7 @@ static int rbd_img_obj_exists_submit(str */ size = sizeof (__le64) + sizeof (__le32) + sizeof (__le32); page_count = (u32)calc_pages_for(0, size); - pages = ceph_alloc_page_vector(page_count, GFP_KERNEL); + pages = ceph_alloc_page_vector(page_count, GFP_NOIO); if (IS_ERR(pages)) { ret = PTR_ERR(pages); goto fail_stat_request; Patches currently in stable-queue which might be from idryomov(a)gmail.com are queue-4.13/rbd-use-gfp_noio-for-parent-stat-and-data-requests.patch

7 years, 11 months

1
0
0 0

[Linux-stable-mirror] Patch "MIPS: BMIPS: Fix missing cbr address" has been added to the 4.13-stable tree

by gregkh＠linuxfoundation.org

This is a note to let you know that I've just added the patch titled MIPS: BMIPS: Fix missing cbr address to the 4.13-stable tree which can be found at: http://www.kernel.org/git/?p=linux/kernel/git/stable/stable-queue.git;a=sum… The filename of the patch is: mips-bmips-fix-missing-cbr-address.patch and it can be found in the queue-4.13 subdirectory. If you, or anyone else, feels it should not be added to the stable tree, please let <stable(a)vger.kernel.org> know about it. >From ea4b3afe1eac8f88bb453798a084fba47a1f155a Mon Sep 17 00:00:00 2001 From: Jaedon Shin <jaedon.shin(a)gmail.com> Date: Fri, 16 Jun 2017 20:03:01 +0900 Subject: MIPS: BMIPS: Fix missing cbr address From: Jaedon Shin <jaedon.shin(a)gmail.com> commit ea4b3afe1eac8f88bb453798a084fba47a1f155a upstream. Fix NULL pointer access in BMIPS3300 RAC flush. Fixes: 738a3f79027b ("MIPS: BMIPS: Add early CPU initialization code") Signed-off-by: Jaedon Shin <jaedon.shin(a)gmail.com> Reviewed-by: Florian Fainelli <f.fainelli(a)gmail.com> Cc: Kevin Cernekee <cernekee(a)gmail.com> Cc: linux-mips(a)linux-mips.org Patchwork: https://patchwork.linux-mips.org/patch/16423/ Signed-off-by: James Hogan <jhogan(a)kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh(a)linuxfoundation.org> --- arch/mips/kernel/smp-bmips.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) --- a/arch/mips/kernel/smp-bmips.c +++ b/arch/mips/kernel/smp-bmips.c @@ -589,11 +589,11 @@ void __init bmips_cpu_setup(void) /* Flush and enable RAC */ cfg = __raw_readl(cbr + BMIPS_RAC_CONFIG); - __raw_writel(cfg | 0x100, BMIPS_RAC_CONFIG); + __raw_writel(cfg | 0x100, cbr + BMIPS_RAC_CONFIG); __raw_readl(cbr + BMIPS_RAC_CONFIG); cfg = __raw_readl(cbr + BMIPS_RAC_CONFIG); - __raw_writel(cfg | 0xf, BMIPS_RAC_CONFIG); + __raw_writel(cfg | 0xf, cbr + BMIPS_RAC_CONFIG); __raw_readl(cbr + BMIPS_RAC_CONFIG); cfg = __raw_readl(cbr + BMIPS_RAC_ADDRESS_RANGE); Patches currently in stable-queue which might be from jaedon.shin(a)gmail.com are queue-4.13/mips-bmips-fix-missing-cbr-address.patch

7 years, 11 months

1
0
0 0

[Linux-stable-mirror] Patch "MIPS: AR7: Ensure that serial ports are properly set up" has been added to the 4.13-stable tree

by gregkh＠linuxfoundation.org

This is a note to let you know that I've just added the patch titled MIPS: AR7: Ensure that serial ports are properly set up to the 4.13-stable tree which can be found at: http://www.kernel.org/git/?p=linux/kernel/git/stable/stable-queue.git;a=sum… The filename of the patch is: mips-ar7-ensure-that-serial-ports-are-properly-set-up.patch and it can be found in the queue-4.13 subdirectory. If you, or anyone else, feels it should not be added to the stable tree, please let <stable(a)vger.kernel.org> know about it. >From b084116f8587b222a2c5ef6dcd846f40f24b9420 Mon Sep 17 00:00:00 2001 From: Oswald Buddenhagen <oswald.buddenhagen(a)gmx.de> Date: Sun, 29 Oct 2017 16:27:20 +0100 Subject: MIPS: AR7: Ensure that serial ports are properly set up From: Oswald Buddenhagen <oswald.buddenhagen(a)gmx.de> commit b084116f8587b222a2c5ef6dcd846f40f24b9420 upstream. Without UPF_FIXED_TYPE, the data from the PORT_AR7 uart_config entry is never copied, resulting in a dead port. Fixes: 154615d55459 ("MIPS: AR7: Use correct UART port type") Signed-off-by: Oswald Buddenhagen <oswald.buddenhagen(a)gmx.de> [jonas.gorski: add Fixes tag] Signed-off-by: Jonas Gorski <jonas.gorski(a)gmail.com> Reviewed-by: Florian Fainelli <f.fainelli(a)gmail.com> Cc: Ralf Baechle <ralf(a)linux-mips.org> Cc: Greg Kroah-Hartman <gregkh(a)linuxfoundation.org> Cc: Yoshihiro YUNOMAE <yoshihiro.yunomae.ez(a)hitachi.com> Cc: Nicolas Schichan <nschichan(a)freebox.fr> Cc: Oswald Buddenhagen <oswald.buddenhagen(a)gmx.de> Cc: linux-mips(a)linux-mips.org Cc: linux-serial(a)vger.kernel.org Patchwork: https://patchwork.linux-mips.org/patch/17543/ Signed-off-by: James Hogan <jhogan(a)kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh(a)linuxfoundation.org> --- arch/mips/ar7/platform.c | 1 + 1 file changed, 1 insertion(+) --- a/arch/mips/ar7/platform.c +++ b/arch/mips/ar7/platform.c @@ -575,6 +575,7 @@ static int __init ar7_register_uarts(voi uart_port.type = PORT_AR7; uart_port.uartclk = clk_get_rate(bus_clk) / 2; uart_port.iotype = UPIO_MEM32; + uart_port.flags = UPF_FIXED_TYPE; uart_port.regshift = 2; uart_port.line = 0; Patches currently in stable-queue which might be from oswald.buddenhagen(a)gmx.de are queue-4.13/mips-ar7-ensure-that-serial-ports-are-properly-set-up.patch

7 years, 11 months

1
0
0 0

[Linux-stable-mirror] Patch "MIPS: AR7: Defer registration of GPIO" has been added to the 4.13-stable tree

by gregkh＠linuxfoundation.org

This is a note to let you know that I've just added the patch titled MIPS: AR7: Defer registration of GPIO to the 4.13-stable tree which can be found at: http://www.kernel.org/git/?p=linux/kernel/git/stable/stable-queue.git;a=sum… The filename of the patch is: mips-ar7-defer-registration-of-gpio.patch and it can be found in the queue-4.13 subdirectory. If you, or anyone else, feels it should not be added to the stable tree, please let <stable(a)vger.kernel.org> know about it. >From e6b03ab63b4d270e0249f96536fde632409dc1dc Mon Sep 17 00:00:00 2001 From: Jonas Gorski <jonas.gorski(a)gmail.com> Date: Sun, 29 Oct 2017 16:27:19 +0100 Subject: MIPS: AR7: Defer registration of GPIO From: Jonas Gorski <jonas.gorski(a)gmail.com> commit e6b03ab63b4d270e0249f96536fde632409dc1dc upstream. When called from prom init code, ar7_gpio_init() will fail as it will call gpiochip_add() which relies on a working kmalloc() to alloc the gpio_desc array and kmalloc is not useable yet at prom init time. Move ar7_gpio_init() to ar7_register_devices() (a device_initcall) where kmalloc works. Fixes: 14e85c0e69d5 ("gpio: remove gpio_descs global array") Signed-off-by: Jonas Gorski <jonas.gorski(a)gmail.com> Reviewed-by: Florian Fainelli <f.fainelli(a)gmail.com> Cc: Ralf Baechle <ralf(a)linux-mips.org> Cc: Greg Kroah-Hartman <gregkh(a)linuxfoundation.org> Cc: Yoshihiro YUNOMAE <yoshihiro.yunomae.ez(a)hitachi.com> Cc: Nicolas Schichan <nschichan(a)freebox.fr> Cc: linux-mips(a)linux-mips.org Cc: linux-serial(a)vger.kernel.org Patchwork: https://patchwork.linux-mips.org/patch/17542/ Signed-off-by: James Hogan <jhogan(a)kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh(a)linuxfoundation.org> --- arch/mips/ar7/platform.c | 4 ++++ arch/mips/ar7/prom.c | 2 -- 2 files changed, 4 insertions(+), 2 deletions(-) --- a/arch/mips/ar7/platform.c +++ b/arch/mips/ar7/platform.c @@ -653,6 +653,10 @@ static int __init ar7_register_devices(v u32 val; int res; + res = ar7_gpio_init(); + if (res) + pr_warn("unable to register gpios: %d\n", res); + res = ar7_register_uarts(); if (res) pr_err("unable to setup uart(s): %d\n", res); --- a/arch/mips/ar7/prom.c +++ b/arch/mips/ar7/prom.c @@ -246,8 +246,6 @@ void __init prom_init(void) ar7_init_cmdline(fw_arg0, (char **)fw_arg1); ar7_init_env((struct env_var *)fw_arg2); console_config(); - - ar7_gpio_init(); } #define PORT(offset) (KSEG1ADDR(AR7_REGS_UART0 + (offset * 4))) Patches currently in stable-queue which might be from jonas.gorski(a)gmail.com are queue-4.13/mips-ar7-ensure-that-serial-ports-are-properly-set-up.patch queue-4.13/mips-ar7-defer-registration-of-gpio.patch

7 years, 11 months

1
0
0 0

[Linux-stable-mirror] Patch "KVM: PPC: Book3S HV: Fix exclusion between HPT resizing and other HPT updates" has been added to the 4.13-stable tree

by gregkh＠linuxfoundation.org

This is a note to let you know that I've just added the patch titled KVM: PPC: Book3S HV: Fix exclusion between HPT resizing and other HPT updates to the 4.13-stable tree which can be found at: http://www.kernel.org/git/?p=linux/kernel/git/stable/stable-queue.git;a=sum… The filename of the patch is: kvm-ppc-book3s-hv-fix-exclusion-between-hpt-resizing-and-other-hpt-updates.patch and it can be found in the queue-4.13 subdirectory. If you, or anyone else, feels it should not be added to the stable tree, please let <stable(a)vger.kernel.org> know about it. >From 38c53af853069adf87181684370d7b8866d6387b Mon Sep 17 00:00:00 2001 From: Paul Mackerras <paulus(a)ozlabs.org> Date: Wed, 8 Nov 2017 14:44:04 +1100 Subject: KVM: PPC: Book3S HV: Fix exclusion between HPT resizing and other HPT updates From: Paul Mackerras <paulus(a)ozlabs.org> commit 38c53af853069adf87181684370d7b8866d6387b upstream. Commit 5e9859699aba ("KVM: PPC: Book3S HV: Outline of KVM-HV HPT resizing implementation", 2016-12-20) added code that tries to exclude any use or update of the hashed page table (HPT) while the HPT resizing code is iterating through all the entries in the HPT. It does this by taking the kvm->lock mutex, clearing the kvm->arch.hpte_setup_done flag and then sending an IPI to all CPUs in the host. The idea is that any VCPU task that tries to enter the guest will see that the hpte_setup_done flag is clear and therefore call kvmppc_hv_setup_htab_rma, which also takes the kvm->lock mutex and will therefore block until we release kvm->lock. However, any VCPU that is already in the guest, or is handling a hypervisor page fault or hypercall, can re-enter the guest without rechecking the hpte_setup_done flag. The IPI will cause a guest exit of any VCPUs that are currently in the guest, but does not prevent those VCPU tasks from immediately re-entering the guest. The result is that after resize_hpt_rehash_hpte() has made a HPTE absent, a hypervisor page fault can occur and make that HPTE present again. This includes updating the rmap array for the guest real page, meaning that we now have a pointer in the rmap array which connects with pointers in the old rev array but not the new rev array. In fact, if the HPT is being reduced in size, the pointer in the rmap array could point outside the bounds of the new rev array. If that happens, we can get a host crash later on such as this one: [91652.628516] Unable to handle kernel paging request for data at address 0xd0000000157fb10c [91652.628668] Faulting instruction address: 0xc0000000000e2640 [91652.628736] Oops: Kernel access of bad area, sig: 11 [#1] [91652.628789] LE SMP NR_CPUS=1024 NUMA PowerNV [91652.628847] Modules linked in: binfmt_misc vhost_net vhost tap xt_CHECKSUM ipt_MASQUERADE nf_nat_masquerade_ipv4 ip6t_rpfilter ip6t_REJECT nf_reject_ipv6 nf_conntrack_ipv6 nf_defrag_ipv6 xt_conntrack ip_set nfnetlink ebtable_nat ebtable_broute bridge stp llc ip6table_mangle ip6table_security ip6table_raw iptable_nat nf_conntrack_ipv4 nf_defrag_ipv4 nf_nat_ipv4 nf_nat nf_conntrack libcrc32c iptable_mangle iptable_security iptable_raw ebtable_filter ebtables ip6table_filter ip6_tables ses enclosure scsi_transport_sas i2c_opal ipmi_powernv ipmi_devintf i2c_core ipmi_msghandler powernv_op_panel nfsd auth_rpcgss oid_registry nfs_acl lockd grace sunrpc kvm_hv kvm_pr kvm scsi_dh_alua dm_service_time dm_multipath tg3 ptp pps_core [last unloaded: stap_552b612747aec2da355051e464fa72a1_14259] [91652.629566] CPU: 136 PID: 41315 Comm: CPU 21/KVM Tainted: G O 4.14.0-1.rc4.dev.gitb27fc5c.el7.centos.ppc64le #1 [91652.629684] task: c0000007a419e400 task.stack: c0000000028d8000 [91652.629750] NIP: c0000000000e2640 LR: d00000000c36e498 CTR: c0000000000e25f0 [91652.629829] REGS: c0000000028db5d0 TRAP: 0300 Tainted: G O (4.14.0-1.rc4.dev.gitb27fc5c.el7.centos.ppc64le) [91652.629932] MSR: 900000010280b033 <SF,HV,VEC,VSX,EE,FP,ME,IR,DR,RI,LE,TM[E]> CR: 44022422 XER: 00000000 [91652.630034] CFAR: d00000000c373f84 DAR: d0000000157fb10c DSISR: 40000000 SOFTE: 1 [91652.630034] GPR00: d00000000c36e498 c0000000028db850 c000000001403900 c0000007b7960000 [91652.630034] GPR04: d0000000117fb100 d000000007ab00d8 000000000033bb10 0000000000000000 [91652.630034] GPR08: fffffffffffffe7f 801001810073bb10 d00000000e440000 d00000000c373f70 [91652.630034] GPR12: c0000000000e25f0 c00000000fdb9400 f000000003b24680 0000000000000000 [91652.630034] GPR16: 00000000000004fb 00007ff7081a0000 00000000000ec91a 000000000033bb10 [91652.630034] GPR20: 0000000000010000 00000000001b1190 0000000000000001 0000000000010000 [91652.630034] GPR24: c0000007b7ab8038 d0000000117fb100 0000000ec91a1190 c000001e6a000000 [91652.630034] GPR28: 00000000033bb100 000000000073bb10 c0000007b7960000 d0000000157fb100 [91652.630735] NIP [c0000000000e2640] kvmppc_add_revmap_chain+0x50/0x120 [91652.630806] LR [d00000000c36e498] kvmppc_book3s_hv_page_fault+0xbb8/0xc40 [kvm_hv] [91652.630884] Call Trace: [91652.630913] [c0000000028db850] [c0000000028db8b0] 0xc0000000028db8b0 (unreliable) [91652.630996] [c0000000028db8b0] [d00000000c36e498] kvmppc_book3s_hv_page_fault+0xbb8/0xc40 [kvm_hv] [91652.631091] [c0000000028db9e0] [d00000000c36a078] kvmppc_vcpu_run_hv+0xdf8/0x1300 [kvm_hv] [91652.631179] [c0000000028dbb30] [d00000000c2248c4] kvmppc_vcpu_run+0x34/0x50 [kvm] [91652.631266] [c0000000028dbb50] [d00000000c220d54] kvm_arch_vcpu_ioctl_run+0x114/0x2a0 [kvm] [91652.631351] [c0000000028dbbd0] [d00000000c2139d8] kvm_vcpu_ioctl+0x598/0x7a0 [kvm] [91652.631433] [c0000000028dbd40] [c0000000003832e0] do_vfs_ioctl+0xd0/0x8c0 [91652.631501] [c0000000028dbde0] [c000000000383ba4] SyS_ioctl+0xd4/0x130 [91652.631569] [c0000000028dbe30] [c00000000000b8e0] system_call+0x58/0x6c [91652.631635] Instruction dump: [91652.631676] fba1ffe8 fbc1fff0 fbe1fff8 f8010010 f821ffa1 2fa70000 793d0020 e9432110 [91652.631814] 7bbf26e4 7c7e1b78 7feafa14 409e0094 <807f000c> 786326e4 7c6a1a14 93a40008 [91652.631959] ---[ end trace ac85ba6db72e5b2e ]--- To fix this, we tighten up the way that the hpte_setup_done flag is checked to ensure that it does provide the guarantee that the resizing code needs. In kvmppc_run_core(), we check the hpte_setup_done flag after disabling interrupts and refuse to enter the guest if it is clear (for a HPT guest). The code that checks hpte_setup_done and calls kvmppc_hv_setup_htab_rma() is moved from kvmppc_vcpu_run_hv() to a point inside the main loop in kvmppc_run_vcpu(), ensuring that we don't just spin endlessly calling kvmppc_run_core() while hpte_setup_done is clear, but instead have a chance to block on the kvm->lock mutex. Finally we also check hpte_setup_done inside the region in kvmppc_book3s_hv_page_fault() where the HPTE is locked and we are about to update the HPTE, and bail out if it is clear. If another CPU is inside kvm_vm_ioctl_resize_hpt_commit) and has cleared hpte_setup_done, then we know that either we are looking at a HPTE that resize_hpt_rehash_hpte() has not yet processed, which is OK, or else we will see hpte_setup_done clear and refuse to update it, because of the full barrier formed by the unlock of the HPTE in resize_hpt_rehash_hpte() combined with the locking of the HPTE in kvmppc_book3s_hv_page_fault(). Fixes: 5e9859699aba ("KVM: PPC: Book3S HV: Outline of KVM-HV HPT resizing implementation") Reported-by: Satheesh Rajendran <satheera(a)in.ibm.com> Signed-off-by: Paul Mackerras <paulus(a)ozlabs.org> Signed-off-by: Greg Kroah-Hartman <gregkh(a)linuxfoundation.org> --- arch/powerpc/kvm/book3s_64_mmu_hv.c | 10 ++++++++++ arch/powerpc/kvm/book3s_hv.c | 29 +++++++++++++++++++---------- 2 files changed, 29 insertions(+), 10 deletions(-) --- a/arch/powerpc/kvm/book3s_64_mmu_hv.c +++ b/arch/powerpc/kvm/book3s_64_mmu_hv.c @@ -645,6 +645,16 @@ int kvmppc_book3s_hv_page_fault(struct k hnow_v = hpte_new_to_old_v(hnow_v, hnow_r); hnow_r = hpte_new_to_old_r(hnow_r); } + + /* + * If the HPT is being resized, don't update the HPTE, + * instead let the guest retry after the resize operation is complete. + * The synchronization for hpte_setup_done test vs. set is provided + * by the HPTE lock. + */ + if (!kvm->arch.hpte_setup_done) + goto out_unlock; + if ((hnow_v & ~HPTE_V_HVLOCK) != hpte[0] || hnow_r != hpte[1] || rev->guest_rpte != hpte[2]) /* HPTE has been changed under us; let the guest retry */ --- a/arch/powerpc/kvm/book3s_hv.c +++ b/arch/powerpc/kvm/book3s_hv.c @@ -2688,11 +2688,14 @@ static noinline void kvmppc_run_core(str * Hard-disable interrupts, and check resched flag and signals. * If we need to reschedule or deliver a signal, clean up * and return without going into the guest(s). + * If the hpte_setup_done flag has been cleared, don't go into the + * guest because that means a HPT resize operation is in progress. */ local_irq_disable(); hard_irq_disable(); if (lazy_irq_pending() || need_resched() || - recheck_signals(&core_info)) { + recheck_signals(&core_info) || + (!kvm_is_radix(vc->kvm) && !vc->kvm->arch.hpte_setup_done)) { local_irq_enable(); vc->vcore_state = VCORE_INACTIVE; /* Unlock all except the primary vcore */ @@ -3061,7 +3064,7 @@ out: static int kvmppc_run_vcpu(struct kvm_run *kvm_run, struct kvm_vcpu *vcpu) { - int n_ceded, i; + int n_ceded, i, r; struct kvmppc_vcore *vc; struct kvm_vcpu *v; @@ -3115,6 +3118,20 @@ static int kvmppc_run_vcpu(struct kvm_ru while (vcpu->arch.state == KVMPPC_VCPU_RUNNABLE && !signal_pending(current)) { + /* See if the HPT and VRMA are ready to go */ + if (!kvm_is_radix(vcpu->kvm) && + !vcpu->kvm->arch.hpte_setup_done) { + spin_unlock(&vc->lock); + r = kvmppc_hv_setup_htab_rma(vcpu); + spin_lock(&vc->lock); + if (r) { + kvm_run->exit_reason = KVM_EXIT_FAIL_ENTRY; + kvm_run->fail_entry.hardware_entry_failure_reason = 0; + vcpu->arch.ret = r; + break; + } + } + if (vc->vcore_state == VCORE_PREEMPT && vc->runner == NULL) kvmppc_vcore_end_preempt(vc); @@ -3232,13 +3249,6 @@ static int kvmppc_vcpu_run_hv(struct kvm /* Order vcpus_running vs. hpte_setup_done, see kvmppc_alloc_reset_hpt */ smp_mb(); - /* On the first time here, set up HTAB and VRMA */ - if (!kvm_is_radix(vcpu->kvm) && !vcpu->kvm->arch.hpte_setup_done) { - r = kvmppc_hv_setup_htab_rma(vcpu); - if (r) - goto out; - } - flush_all_to_thread(current); /* Save userspace EBB and other register values */ @@ -3286,7 +3296,6 @@ static int kvmppc_vcpu_run_hv(struct kvm } mtspr(SPRN_VRSAVE, user_vrsave); - out: vcpu->arch.state = KVMPPC_VCPU_NOTREADY; atomic_dec(&vcpu->kvm->arch.vcpus_running); return r; Patches currently in stable-queue which might be from paulus(a)ozlabs.org are queue-4.13/kvm-ppc-book3s-hv-fix-exclusion-between-hpt-resizing-and-other-hpt-updates.patch

7 years, 11 months

1
0
0 0

[Linux-stable-mirror] Patch "Input: elan_i2c - add ELAN060C to the ACPI table" has been added to the 4.13-stable tree

by gregkh＠linuxfoundation.org

This is a note to let you know that I've just added the patch titled Input: elan_i2c - add ELAN060C to the ACPI table to the 4.13-stable tree which can be found at: http://www.kernel.org/git/?p=linux/kernel/git/stable/stable-queue.git;a=sum… The filename of the patch is: input-elan_i2c-add-elan060c-to-the-acpi-table.patch and it can be found in the queue-4.13 subdirectory. If you, or anyone else, feels it should not be added to the stable tree, please let <stable(a)vger.kernel.org> know about it. >From cdea6a30c2689cc33b34c6691b57cca277f0c5dc Mon Sep 17 00:00:00 2001 From: Kai-Heng Feng <kai.heng.feng(a)canonical.com> Date: Tue, 7 Nov 2017 16:19:24 -0800 Subject: Input: elan_i2c - add ELAN060C to the ACPI table From: Kai-Heng Feng <kai.heng.feng(a)canonical.com> commit cdea6a30c2689cc33b34c6691b57cca277f0c5dc upstream. ELAN060C touchpad uses elan_i2c as its driver. It can be found on Lenovo ideapad 320-14AST. BugLink: https://bugs.launchpad.net/bugs/1727544 Signed-off-by: Kai-Heng Feng <kai.heng.feng(a)canonical.com> Signed-off-by: Dmitry Torokhov <dmitry.torokhov(a)gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh(a)linuxfoundation.org> --- drivers/input/mouse/elan_i2c_core.c | 1 + 1 file changed, 1 insertion(+) --- a/drivers/input/mouse/elan_i2c_core.c +++ b/drivers/input/mouse/elan_i2c_core.c @@ -1253,6 +1253,7 @@ static const struct acpi_device_id elan_ { "ELAN0605", 0 }, { "ELAN0609", 0 }, { "ELAN060B", 0 }, + { "ELAN060C", 0 }, { "ELAN0611", 0 }, { "ELAN1000", 0 }, { } Patches currently in stable-queue which might be from kai.heng.feng(a)canonical.com are queue-4.13/input-elan_i2c-add-elan060c-to-the-acpi-table.patch

7 years, 11 months

1
0
0 0

[Linux-stable-mirror] Patch "drm/vmwgfx: Fix Ubuntu 17.10 Wayland black screen issue" has been added to the 4.13-stable tree

by gregkh＠linuxfoundation.org

This is a note to let you know that I've just added the patch titled drm/vmwgfx: Fix Ubuntu 17.10 Wayland black screen issue to the 4.13-stable tree which can be found at: http://www.kernel.org/git/?p=linux/kernel/git/stable/stable-queue.git;a=sum… The filename of the patch is: drm-vmwgfx-fix-ubuntu-17.10-wayland-black-screen-issue.patch and it can be found in the queue-4.13 subdirectory. If you, or anyone else, feels it should not be added to the stable tree, please let <stable(a)vger.kernel.org> know about it. >From cef75036c40408ba3bc308bcb00a3d440da713fc Mon Sep 17 00:00:00 2001 From: Sinclair Yeh <syeh(a)vmware.com> Date: Wed, 1 Nov 2017 10:47:05 -0700 Subject: drm/vmwgfx: Fix Ubuntu 17.10 Wayland black screen issue From: Sinclair Yeh <syeh(a)vmware.com> commit cef75036c40408ba3bc308bcb00a3d440da713fc upstream. This is an extension of Commit 7c20d213dd3c ("drm/vmwgfx: Work around mode set failure in 2D VMs") With Wayland desktop and atomic mode set, during the mode setting process there is a moment when two framebuffer sized surfaces are being pinned. This was not an issue with Xorg. Since this only happens during a mode change, there should be no performance impact by increasing allowable mem_size. Signed-off-by: Sinclair Yeh <syeh(a)vmware.com> Reviewed-by: Thomas Hellstrom <thellstrom(a)vmware.com> Signed-off-by: Greg Kroah-Hartman <gregkh(a)linuxfoundation.org> --- drivers/gpu/drm/vmwgfx/vmwgfx_drv.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) --- a/drivers/gpu/drm/vmwgfx/vmwgfx_drv.c +++ b/drivers/gpu/drm/vmwgfx/vmwgfx_drv.c @@ -722,7 +722,7 @@ static int vmw_driver_load(struct drm_de * allocation taken by fbdev */ if (!(dev_priv->capabilities & SVGA_CAP_3D)) - mem_size *= 2; + mem_size *= 3; dev_priv->max_mob_pages = mem_size * 1024 / PAGE_SIZE; dev_priv->prim_bb_mem = Patches currently in stable-queue which might be from syeh(a)vmware.com are queue-4.13/drm-vmwgfx-fix-ubuntu-17.10-wayland-black-screen-issue.patch

7 years, 11 months

1
0
0 0

[Linux-stable-mirror] Patch "MIPS: AR7: Ensure that serial ports are properly set up" has been added to the 3.18-stable tree

by gregkh＠linuxfoundation.org

This is a note to let you know that I've just added the patch titled MIPS: AR7: Ensure that serial ports are properly set up to the 3.18-stable tree which can be found at: http://www.kernel.org/git/?p=linux/kernel/git/stable/stable-queue.git;a=sum… The filename of the patch is: mips-ar7-ensure-that-serial-ports-are-properly-set-up.patch and it can be found in the queue-3.18 subdirectory. If you, or anyone else, feels it should not be added to the stable tree, please let <stable(a)vger.kernel.org> know about it. >From b084116f8587b222a2c5ef6dcd846f40f24b9420 Mon Sep 17 00:00:00 2001 From: Oswald Buddenhagen <oswald.buddenhagen(a)gmx.de> Date: Sun, 29 Oct 2017 16:27:20 +0100 Subject: MIPS: AR7: Ensure that serial ports are properly set up From: Oswald Buddenhagen <oswald.buddenhagen(a)gmx.de> commit b084116f8587b222a2c5ef6dcd846f40f24b9420 upstream. Without UPF_FIXED_TYPE, the data from the PORT_AR7 uart_config entry is never copied, resulting in a dead port. Fixes: 154615d55459 ("MIPS: AR7: Use correct UART port type") Signed-off-by: Oswald Buddenhagen <oswald.buddenhagen(a)gmx.de> [jonas.gorski: add Fixes tag] Signed-off-by: Jonas Gorski <jonas.gorski(a)gmail.com> Reviewed-by: Florian Fainelli <f.fainelli(a)gmail.com> Cc: Ralf Baechle <ralf(a)linux-mips.org> Cc: Greg Kroah-Hartman <gregkh(a)linuxfoundation.org> Cc: Yoshihiro YUNOMAE <yoshihiro.yunomae.ez(a)hitachi.com> Cc: Nicolas Schichan <nschichan(a)freebox.fr> Cc: Oswald Buddenhagen <oswald.buddenhagen(a)gmx.de> Cc: linux-mips(a)linux-mips.org Cc: linux-serial(a)vger.kernel.org Patchwork: https://patchwork.linux-mips.org/patch/17543/ Signed-off-by: James Hogan <jhogan(a)kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh(a)linuxfoundation.org> --- arch/mips/ar7/platform.c | 1 + 1 file changed, 1 insertion(+) --- a/arch/mips/ar7/platform.c +++ b/arch/mips/ar7/platform.c @@ -581,6 +581,7 @@ static int __init ar7_register_uarts(voi uart_port.type = PORT_AR7; uart_port.uartclk = clk_get_rate(bus_clk) / 2; uart_port.iotype = UPIO_MEM32; + uart_port.flags = UPF_FIXED_TYPE; uart_port.regshift = 2; uart_port.line = 0; Patches currently in stable-queue which might be from oswald.buddenhagen(a)gmx.de are queue-3.18/mips-ar7-ensure-that-serial-ports-are-properly-set-up.patch

7 years, 11 months

1
0
0 0

2025

2024

2023

2022

2021

2020

2019

2018

2017

Linux-stable-mirror