Since the commit c1f3f9797c1f ("can: netlink: can_changelink(): fix NULL
pointer deref of struct can_priv::do_set_mode"), the automatic restart
delay can only be set for devices that implement the restart handler struct
can_priv::do_set_mode. As it makes no sense to configure a automatic
restart for devices that doesn't support it.
However, since systemd commit 13ce5d4632e3 ("network/can: properly handle
CAN.RestartSec=0") [1], systemd-networkd correctly handles a restart delay
of "0" (i.e. the restart is disabled). Which means that a disabled restart
is always configured in the kernel.
On systems with both changes active this causes that CAN interfaces that
don't implement a restart handler cannot be brought up by systemd-networkd.
Solve this problem by allowing a delay of "0" to be configured, even if the
device does not implement a restart handler.
[1] https://github.com/systemd/systemd/commit/13ce5d4632e395521e6205c954493c7fc…
Cc: stable(a)vger.kernel.org
Cc: Andrei Lalaev <andrey.lalaev(a)gmail.com>
Reported-by: Marc Kleine-Budde <mkl(a)pengutronix.de>
Closes: https://lore.kernel.org/all/20251020-certain-arrogant-vole-of-sunshine-1418…
Fixes: c1f3f9797c1f ("can: netlink: can_changelink(): fix NULL pointer deref of struct can_priv::do_set_mode")
Signed-off-by: Marc Kleine-Budde <mkl(a)pengutronix.de>
---
drivers/net/can/dev/netlink.c | 6 ++++--
1 file changed, 4 insertions(+), 2 deletions(-)
diff --git a/drivers/net/can/dev/netlink.c b/drivers/net/can/dev/netlink.c
index 0591406b6f32..6f83b87d54fc 100644
--- a/drivers/net/can/dev/netlink.c
+++ b/drivers/net/can/dev/netlink.c
@@ -452,7 +452,9 @@ static int can_changelink(struct net_device *dev, struct nlattr *tb[],
}
if (data[IFLA_CAN_RESTART_MS]) {
- if (!priv->do_set_mode) {
+ unsigned int restart_ms = nla_get_u32(data[IFLA_CAN_RESTART_MS]);
+
+ if (restart_ms != 0 && !priv->do_set_mode) {
NL_SET_ERR_MSG(extack,
"Device doesn't support restart from Bus Off");
return -EOPNOTSUPP;
@@ -461,7 +463,7 @@ static int can_changelink(struct net_device *dev, struct nlattr *tb[],
/* Do not allow changing restart delay while running */
if (dev->flags & IFF_UP)
return -EBUSY;
- priv->restart_ms = nla_get_u32(data[IFLA_CAN_RESTART_MS]);
+ priv->restart_ms = restart_ms;
}
if (data[IFLA_CAN_RESTART]) {
---
base-commit: ffff5c8fc2af2218a3332b3d5b97654599d50cde
change-id: 20251020-netlink-fix-restart-6016f4d93e38
Best regards,
--
Marc Kleine-Budde <mkl(a)pengutronix.de>
Since the commit c1f3f9797c1f ("can: netlink: can_changelink(): fix NULL
pointer deref of struct can_priv::do_set_mode"), the automatic restart
delay can only be set for devices that implement the restart handler struct
can_priv::do_set_mode. As it makes no sense to configure a automatic
restart for devices that doesn't support it.
However, since systemd commit 13ce5d4632e3 ("network/can: properly handle
CAN.RestartSec=0") [1], systemd-networkd correctly handles a restart delay
of "0" (i.e. the restart is disabled). Which means that a disabled restart
is always configured in the kernel.
On systems with both changes active this causes that CAN interfaces that
don't implement a restart handler cannot be brought up by systemd-networkd.
Solve this problem by allowing a delay of "0" to be configured, even if the
device does not implement a restart handler.
[1] https://github.com/systemd/systemd/commit/13ce5d4632e395521e6205c954493c7fc…
Cc: stable(a)vger.kernel.org
Cc: Andrei Lalaev <andrey.lalaev(a)gmail.com>
Reported-by: Marc Kleine-Budde <mkl(a)pengutronix.de>
Closes: https://lore.kernel.org/all/20251020-certain-arrogant-vole-of-sunshine-1418…
Fixes: c1f3f9797c1f ("can: netlink: can_changelink(): fix NULL pointer deref of struct can_priv::do_set_mode")
Link: https://patch.msgid.link/20251020-netlink-fix-restart-v1-1-3f53c7f8520b@pen…
Signed-off-by: Marc Kleine-Budde <mkl(a)pengutronix.de>
---
drivers/net/can/dev/netlink.c | 6 ++++--
1 file changed, 4 insertions(+), 2 deletions(-)
diff --git a/drivers/net/can/dev/netlink.c b/drivers/net/can/dev/netlink.c
index 0591406b6f32..6f83b87d54fc 100644
--- a/drivers/net/can/dev/netlink.c
+++ b/drivers/net/can/dev/netlink.c
@@ -452,7 +452,9 @@ static int can_changelink(struct net_device *dev, struct nlattr *tb[],
}
if (data[IFLA_CAN_RESTART_MS]) {
- if (!priv->do_set_mode) {
+ unsigned int restart_ms = nla_get_u32(data[IFLA_CAN_RESTART_MS]);
+
+ if (restart_ms != 0 && !priv->do_set_mode) {
NL_SET_ERR_MSG(extack,
"Device doesn't support restart from Bus Off");
return -EOPNOTSUPP;
@@ -461,7 +463,7 @@ static int can_changelink(struct net_device *dev, struct nlattr *tb[],
/* Do not allow changing restart delay while running */
if (dev->flags & IFF_UP)
return -EBUSY;
- priv->restart_ms = nla_get_u32(data[IFLA_CAN_RESTART_MS]);
+ priv->restart_ms = restart_ms;
}
if (data[IFLA_CAN_RESTART]) {
--
2.51.0
Hi. This is supposed to be a patch, but I think it's worth discussing
how it should be backported to -stable, so I've labeled it as [DISCUSSION].
The bug described below was unintentionally fixed in v6.5 and not
backported to -stable. So technically I would need to use "Option 3" [A],
but since the original patch [B] did not intend to fix a bug (and it's also
part of a larger patch series), it looks quite different from the patch below,
and I'm not sure what the backport should look like.
I think there are probably two options:
1. Provide the description of the original patch along with a very long,
detailed explanation of why the patch deviates from the upstream version, or
2. Post the patch below with a clarification that it was fixed upstream
by commit 670ddd8cdcbd1.
Any thoughts?
[A] https://www.kernel.org/doc/html/latest/process/stable-kernel-rules.html#opt…
[B] https://lkml.kernel.org/r/725a42a9-91e9-c868-925-e3a5fd40bb4f@google.com
(Upstream commit 670ddd8cdcbd1)
In any case, no matter how we backport this, it needs some review and
feedback would be appreciated. The patch applies to v6.1 and v5.15, and
v5.10 but not v5.4.
From cf45867ab8e48b42160b7253390db7bdecef1455 Mon Sep 17 00:00:00 2001
From: Harry Yoo <harry.yoo(a)oracle.com>
Date: Thu, 11 Sep 2025 20:05:40 +0900
Subject: [PATCH] mm, numa: fix bad pmd by atomically checking is_swap_pmd() in
change_prot_numa()
It was observed that a bad pmd is seen when automatic NUMA balancing
is marking page table entries as prot_numa:
[2437548.196018] mm/pgtable-generic.c:50: bad pmd 00000000af22fc02(dffffffe71fbfe02)
With some kernel modification, the call stack was dumped:
[2437548.235022] Call Trace:
[2437548.238234] <TASK>
[2437548.241060] dump_stack_lvl+0x46/0x61
[2437548.245689] panic+0x106/0x2e5
[2437548.249497] pmd_clear_bad+0x3c/0x3c
[2437548.253967] change_pmd_range.isra.0+0x34d/0x3a7
[2437548.259537] change_p4d_range+0x156/0x20e
[2437548.264392] change_protection_range+0x116/0x1a9
[2437548.269976] change_prot_numa+0x15/0x37
[2437548.274774] task_numa_work+0x1b8/0x302
[2437548.279512] task_work_run+0x62/0x95
[2437548.283882] exit_to_user_mode_loop+0x1a4/0x1a9
[2437548.289277] exit_to_user_mode_prepare+0xf4/0xfc
[2437548.294751] ? sysvec_apic_timer_interrupt+0x34/0x81
[2437548.300677] irqentry_exit_to_user_mode+0x5/0x25
[2437548.306153] asm_sysvec_apic_timer_interrupt+0x16/0x1b
This is due to a race condition between change_prot_numa() and
THP migration because the kernel doesn't check is_swap_pmd() and
pmd_trans_huge() atomically:
change_prot_numa() THP migration
======================================================================
- change_pmd_range()
-> is_swap_pmd() returns false,
meaning it's not a PMD migration
entry.
- do_huge_pmd_numa_page()
-> migrate_misplaced_page() sets
migration entries for the THP.
- change_pmd_range()
-> pmd_none_or_clear_bad_unless_trans_huge()
-> pmd_none() and pmd_trans_huge() returns false
- pmd_none_or_clear_bad_unless_trans_huge()
-> pmd_bad() returns true for the migration entry!
For the race condition described above to occur:
1) AutoNUMA must be unmapping a range of pages, with at least part of the
range already unmapped by AutoNUMA.
2) While AutoNUMA is in the process of unmapping, a NUMA hinting fault
occurs within that range, specifically when we are about to unmap
the PMD entry, between the is_swap_pmd() and pmd_trans_huge() checks.
So this is a really rare race condition and it's observed that it takes
usually a few days of autonuma-intensive testing to trigger.
A bit of history on a similar race condition in the past:
In fact, a similar race condition caused by not checking pmd_trans_huge()
atomically was reported [1] in 2017. However, instead of the patch [1],
another patch series [3] fixed the problem [2] by not clearing the pmd
entry but invaliding it instead (so that pmd_trans_huge() would still
return true).
Despite patch series [3], the bad pmd error continued to be reported
in mainline. As a result, [1] was resurrected [4] and it landed mainline
in 2020 in a hope that it would resolve the issue. However, now it turns
out that [3] was not sufficient.
Fix this race condition by checking is_swap_pmd() and pmd_trans_huge()
atomically. With that, the kernel should see either
pmd_trans_huge() == true, or is_swap_pmd() == true when another task is
migrating the page concurrently.
This bug was introduced when THP migration support was added. More
specifically, by commit 84c3fc4e9c56 ("mm: thp: check pmd migration entry
in common path")).
It is unintentionally fixed since v6.5 by commit 670ddd8cdcbd1
("mm/mprotect: delete pmd_none_or_clear_bad_unless_trans_huge()") while
removing pmd_none_or_clear_bad_unless_trans_huge() function. But it's not
backported to -stable because it was fixed unintentionally.
Link: https://lore.kernel.org/linux-mm/20170410094825.2yfo5zehn7pchg6a@techsingul… [1]
Link: https://lore.kernel.org/linux-mm/8A6309F4-DB76-48FA-BE7F-BF9536A4C4E5@cs.ru… [2]
Link: https://lore.kernel.org/linux-mm/20170302151034.27829-1-kirill.shutemov@lin… [3]
Link: https://lore.kernel.org/linux-mm/20200216191800.22423-1-aquini@redhat.com [4]
Fixes: 84c3fc4e9c56 ("mm: thp: check pmd migration entry in common path")
Signed-off-by: Harry Yoo <harry.yoo(a)oracle.com>
---
mm/mprotect.c | 4 ++--
1 file changed, 2 insertions(+), 2 deletions(-)
diff --git a/mm/mprotect.c b/mm/mprotect.c
index 668bfaa6ed2a..c0e796c0f9b0 100644
--- a/mm/mprotect.c
+++ b/mm/mprotect.c
@@ -303,7 +303,7 @@ static inline int pmd_none_or_clear_bad_unless_trans_huge(pmd_t *pmd)
if (pmd_none(pmdval))
return 1;
- if (pmd_trans_huge(pmdval))
+ if (is_swap_pmd(pmdval) || pmd_trans_huge(pmdval))
return 0;
if (unlikely(pmd_bad(pmdval))) {
pmd_clear_bad(pmd);
@@ -373,7 +373,7 @@ static inline unsigned long change_pmd_range(struct mmu_gather *tlb,
* Hence, it's necessary to atomically read the PMD value
* for all the checks.
*/
- if (!is_swap_pmd(*pmd) && !pmd_devmap(*pmd) &&
+ if (!pmd_devmap(*pmd) &&
pmd_none_or_clear_bad_unless_trans_huge(pmd))
goto next;
--
2.43.0
From: Aurabindo Pillai <aurabindo.pillai(a)amd.com>
Justificiation:
This fixes DisplayPort lockups on Polaris GPUs during DPMS transitions,
which have been a major headache on our POWER9 platforms. Backport to
Debian stable kernel version.
[ Upstream commit c210b757b400959577a5a17b783b5959b82baed8 ]
Accessing DC from amdgpu_dm is usually preceded by acquisition of
dc_lock mutex. Most of the DC API that DM calls are under a DC lock.
However, there are a few that are not. Some DC API called from interrupt
context end up sending DMUB commands via a DC API, while other threads were
using DMUB. This was apparent from a race between calls for setting idle
optimization enable/disable and the DC API to set vmin/vmax.
Offload the call to dc_stream_adjust_vmin_vmax() to a thread instead
of directly calling them from the interrupt handler such that it waits
for dc_lock.
[Timothy Pearson]
Modified header file patch to apply to 6.12
Reviewed-by: Nicholas Kazlauskas <nicholas.kazlauskas(a)amd.com>
Signed-off-by: Aurabindo Pillai <aurabindo.pillai(a)amd.com>
Signed-off-by: Roman Li <roman.li(a)amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler(a)amd.com>
Signed-off-by: Alex Deucher <alexander.deucher(a)amd.com>
Signed-off-by: Timothy Pearson <tpearson(a)raptorengineering.com>
---
.../gpu/drm/amd/display/amdgpu_dm/amdgpu_dm.c | 55 +++++++++++++++++--
.../gpu/drm/amd/display/amdgpu_dm/amdgpu_dm.h | 14 +++++
2 files changed, 63 insertions(+), 6 deletions(-)
diff --git a/drivers/gpu/drm/amd/display/amdgpu_dm/amdgpu_dm.c b/drivers/gpu/drm/amd/display/amdgpu_dm/amdgpu_dm.c
index b02ff92bae0b..fd6d66832ccf 100644
--- a/drivers/gpu/drm/amd/display/amdgpu_dm/amdgpu_dm.c
+++ b/drivers/gpu/drm/amd/display/amdgpu_dm/amdgpu_dm.c
@@ -533,6 +533,50 @@ static void dm_pflip_high_irq(void *interrupt_params)
amdgpu_crtc->crtc_id, amdgpu_crtc, vrr_active, (int)!e);
}
+static void dm_handle_vmin_vmax_update(struct work_struct *offload_work)
+{
+ struct vupdate_offload_work *work = container_of(offload_work, struct vupdate_offload_work, work);
+ struct amdgpu_device *adev = work->adev;
+ struct dc_stream_state *stream = work->stream;
+ struct dc_crtc_timing_adjust *adjust = work->adjust;
+
+ mutex_lock(&adev->dm.dc_lock);
+ dc_stream_adjust_vmin_vmax(adev->dm.dc, stream, adjust);
+ mutex_unlock(&adev->dm.dc_lock);
+
+ dc_stream_release(stream);
+ kfree(work->adjust);
+ kfree(work);
+}
+
+static void schedule_dc_vmin_vmax(struct amdgpu_device *adev,
+ struct dc_stream_state *stream,
+ struct dc_crtc_timing_adjust *adjust)
+{
+ struct vupdate_offload_work *offload_work = kzalloc(sizeof(*offload_work), GFP_KERNEL);
+ if (!offload_work) {
+ drm_dbg_driver(adev_to_drm(adev), "Failed to allocate vupdate_offload_work\n");
+ return;
+ }
+
+ struct dc_crtc_timing_adjust *adjust_copy = kzalloc(sizeof(*adjust_copy), GFP_KERNEL);
+ if (!adjust_copy) {
+ drm_dbg_driver(adev_to_drm(adev), "Failed to allocate adjust_copy\n");
+ kfree(offload_work);
+ return;
+ }
+
+ dc_stream_retain(stream);
+ memcpy(adjust_copy, adjust, sizeof(*adjust_copy));
+
+ INIT_WORK(&offload_work->work, dm_handle_vmin_vmax_update);
+ offload_work->adev = adev;
+ offload_work->stream = stream;
+ offload_work->adjust = adjust_copy;
+
+ queue_work(system_wq, &offload_work->work);
+}
+
static void dm_vupdate_high_irq(void *interrupt_params)
{
struct common_irq_params *irq_params = interrupt_params;
@@ -582,10 +626,9 @@ static void dm_vupdate_high_irq(void *interrupt_params)
acrtc->dm_irq_params.stream,
&acrtc->dm_irq_params.vrr_params);
- dc_stream_adjust_vmin_vmax(
- adev->dm.dc,
- acrtc->dm_irq_params.stream,
- &acrtc->dm_irq_params.vrr_params.adjust);
+ schedule_dc_vmin_vmax(adev,
+ acrtc->dm_irq_params.stream,
+ &acrtc->dm_irq_params.vrr_params.adjust);
spin_unlock_irqrestore(&adev_to_drm(adev)->event_lock, flags);
}
}
@@ -675,8 +718,8 @@ static void dm_crtc_high_irq(void *interrupt_params)
acrtc->dm_irq_params.stream,
&acrtc->dm_irq_params.vrr_params);
- dc_stream_adjust_vmin_vmax(adev->dm.dc, acrtc->dm_irq_params.stream,
- &acrtc->dm_irq_params.vrr_params.adjust);
+ schedule_dc_vmin_vmax(adev, acrtc->dm_irq_params.stream,
+ &acrtc->dm_irq_params.vrr_params.adjust);
}
/*
diff --git a/drivers/gpu/drm/amd/display/amdgpu_dm/amdgpu_dm.h b/drivers/gpu/drm/amd/display/amdgpu_dm/amdgpu_dm.h
index 9603352ee094..aa99e226a381 100644
--- a/drivers/gpu/drm/amd/display/amdgpu_dm/amdgpu_dm.h
+++ b/drivers/gpu/drm/amd/display/amdgpu_dm/amdgpu_dm.h
@@ -1012,4 +1012,18 @@ void dm_free_gpu_mem(struct amdgpu_device *adev,
bool amdgpu_dm_is_headless(struct amdgpu_device *adev);
+/**
+ * struct dm_vupdate_work - Work data for periodic action in idle
+ * @work: Kernel work data for the work event
+ * @adev: amdgpu_device back pointer
+ * @stream: DC stream associated with the crtc
+ * @adjust: DC CRTC timing adjust to be applied to the crtc
+ */
+struct vupdate_offload_work {
+ struct work_struct work;
+ struct amdgpu_device *adev;
+ struct dc_stream_state *stream;
+ struct dc_crtc_timing_adjust *adjust;
+};
+
#endif /* __AMDGPU_DM_H__ */
--
2.47.2
The migration of IDIO-16 GPIO drivers to the regmap API resulted in some
regressions to the gpio-104-idio-16, gpio-pci-idio-16, and gpio-idio-16
modules. Specifically, the 104-idio-16 and pci-idio-16 GPIO drivers
utilize regmap caching and thus must set max_register for their
regmap_config, while gpio-idio-16 requires fixed_direction_output to
represent the fixed direction of the IDIO-16 GPIO lines. Fixes for these
regressions are provided by this series.
Link: https://lore.kernel.org/r/cover.1680618405.git.william.gray@linaro.org
Link: https://lore.kernel.org/r/9b0375fd-235f-4ee1-a7fa-daca296ef6bf@nutanix.com
Signed-off-by: William Breathitt Gray <wbg(a)kernel.org>
---
William Breathitt Gray (3):
gpio: 104-idio-16: Define maximum valid register address offset
gpio: pci-idio-16: Define maximum valid register address offset
gpio: idio-16: Define fixed direction of the GPIO lines
drivers/gpio/gpio-104-idio-16.c | 1 +
drivers/gpio/gpio-idio-16.c | 5 +++++
drivers/gpio/gpio-pci-idio-16.c | 1 +
3 files changed, 7 insertions(+)
---
base-commit: eba11116f39533d2e38cc5898014f2c95f32d23a
change-id: 20251017-fix-gpio-idio-16-regmap-1282cdc56a19
Best regards,
--
William Breathitt Gray <wbg(a)kernel.org>
The patch below does not apply to the 5.10-stable tree.
If someone wants it applied there, or to any other stable or longterm
tree, then please email the backport, including the original git commit
id to <stable(a)vger.kernel.org>.
To reproduce the conflict and resubmit, you may use the following commands:
git fetch https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git/ linux-5.10.y
git checkout FETCH_HEAD
git cherry-pick -x 466f7a2fef2a4e426f809f79845a1ec1aeb558f4
# <resolve conflicts, build, test, etc.>
git commit -s
git send-email --to '<stable(a)vger.kernel.org>' --in-reply-to '2025101624-legacy-gab-3e94@gregkh' --subject-prefix 'PATCH 5.10.y' HEAD^..
Possible dependencies:
thanks,
greg k-h
------------------ original commit in Linus's tree ------------------
From 466f7a2fef2a4e426f809f79845a1ec1aeb558f4 Mon Sep 17 00:00:00 2001
From: Sean Nyekjaer <sean(a)geanix.com>
Date: Mon, 1 Sep 2025 09:49:15 +0200
Subject: [PATCH] iio: imu: inv_icm42600: Avoid configuring if already
pm_runtime suspended
Do as in suspend, skip resume configuration steps if the device is already
pm_runtime suspended. This avoids reconfiguring a device that is already
in the correct low-power state and ensures that pm_runtime handles the
power state transitions properly.
Fixes: 31c24c1e93c3 ("iio: imu: inv_icm42600: add core of new inv_icm42600 driver")
Signed-off-by: Sean Nyekjaer <sean(a)geanix.com>
Link: https://patch.msgid.link/20250901-icm42pmreg-v3-3-ef1336246960@geanix.com
Cc: <Stable(a)vger.kernel.org>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron(a)huawei.com>
diff --git a/drivers/iio/imu/inv_icm42600/inv_icm42600_core.c b/drivers/iio/imu/inv_icm42600/inv_icm42600_core.c
index 41b275ecc7e2..ee780f530dc8 100644
--- a/drivers/iio/imu/inv_icm42600/inv_icm42600_core.c
+++ b/drivers/iio/imu/inv_icm42600/inv_icm42600_core.c
@@ -837,17 +837,15 @@ static int inv_icm42600_suspend(struct device *dev)
struct device *accel_dev;
bool wakeup;
int accel_conf;
- int ret;
+ int ret = 0;
mutex_lock(&st->lock);
st->suspended.gyro = st->conf.gyro.mode;
st->suspended.accel = st->conf.accel.mode;
st->suspended.temp = st->conf.temp_en;
- if (pm_runtime_suspended(dev)) {
- ret = 0;
+ if (pm_runtime_suspended(dev))
goto out_unlock;
- }
/* disable FIFO data streaming */
if (st->fifo.on) {
@@ -900,10 +898,13 @@ static int inv_icm42600_resume(struct device *dev)
struct inv_icm42600_sensor_state *accel_st = iio_priv(st->indio_accel);
struct device *accel_dev;
bool wakeup;
- int ret;
+ int ret = 0;
mutex_lock(&st->lock);
+ if (pm_runtime_suspended(dev))
+ goto out_unlock;
+
/* check wakeup capability */
accel_dev = &st->indio_accel->dev;
wakeup = st->apex.on && device_may_wakeup(accel_dev);
The patch below does not apply to the 5.15-stable tree.
If someone wants it applied there, or to any other stable or longterm
tree, then please email the backport, including the original git commit
id to <stable(a)vger.kernel.org>.
To reproduce the conflict and resubmit, you may use the following commands:
git fetch https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git/ linux-5.15.y
git checkout FETCH_HEAD
git cherry-pick -x 466f7a2fef2a4e426f809f79845a1ec1aeb558f4
# <resolve conflicts, build, test, etc.>
git commit -s
git send-email --to '<stable(a)vger.kernel.org>' --in-reply-to '2025101624-blazing-sharpener-111d@gregkh' --subject-prefix 'PATCH 5.15.y' HEAD^..
Possible dependencies:
thanks,
greg k-h
------------------ original commit in Linus's tree ------------------
From 466f7a2fef2a4e426f809f79845a1ec1aeb558f4 Mon Sep 17 00:00:00 2001
From: Sean Nyekjaer <sean(a)geanix.com>
Date: Mon, 1 Sep 2025 09:49:15 +0200
Subject: [PATCH] iio: imu: inv_icm42600: Avoid configuring if already
pm_runtime suspended
Do as in suspend, skip resume configuration steps if the device is already
pm_runtime suspended. This avoids reconfiguring a device that is already
in the correct low-power state and ensures that pm_runtime handles the
power state transitions properly.
Fixes: 31c24c1e93c3 ("iio: imu: inv_icm42600: add core of new inv_icm42600 driver")
Signed-off-by: Sean Nyekjaer <sean(a)geanix.com>
Link: https://patch.msgid.link/20250901-icm42pmreg-v3-3-ef1336246960@geanix.com
Cc: <Stable(a)vger.kernel.org>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron(a)huawei.com>
diff --git a/drivers/iio/imu/inv_icm42600/inv_icm42600_core.c b/drivers/iio/imu/inv_icm42600/inv_icm42600_core.c
index 41b275ecc7e2..ee780f530dc8 100644
--- a/drivers/iio/imu/inv_icm42600/inv_icm42600_core.c
+++ b/drivers/iio/imu/inv_icm42600/inv_icm42600_core.c
@@ -837,17 +837,15 @@ static int inv_icm42600_suspend(struct device *dev)
struct device *accel_dev;
bool wakeup;
int accel_conf;
- int ret;
+ int ret = 0;
mutex_lock(&st->lock);
st->suspended.gyro = st->conf.gyro.mode;
st->suspended.accel = st->conf.accel.mode;
st->suspended.temp = st->conf.temp_en;
- if (pm_runtime_suspended(dev)) {
- ret = 0;
+ if (pm_runtime_suspended(dev))
goto out_unlock;
- }
/* disable FIFO data streaming */
if (st->fifo.on) {
@@ -900,10 +898,13 @@ static int inv_icm42600_resume(struct device *dev)
struct inv_icm42600_sensor_state *accel_st = iio_priv(st->indio_accel);
struct device *accel_dev;
bool wakeup;
- int ret;
+ int ret = 0;
mutex_lock(&st->lock);
+ if (pm_runtime_suspended(dev))
+ goto out_unlock;
+
/* check wakeup capability */
accel_dev = &st->indio_accel->dev;
wakeup = st->apex.on && device_may_wakeup(accel_dev);
The patch below does not apply to the 6.1-stable tree.
If someone wants it applied there, or to any other stable or longterm
tree, then please email the backport, including the original git commit
id to <stable(a)vger.kernel.org>.
To reproduce the conflict and resubmit, you may use the following commands:
git fetch https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git/ linux-6.1.y
git checkout FETCH_HEAD
git cherry-pick -x 466f7a2fef2a4e426f809f79845a1ec1aeb558f4
# <resolve conflicts, build, test, etc.>
git commit -s
git send-email --to '<stable(a)vger.kernel.org>' --in-reply-to '2025101623-clarify-manhood-adaa@gregkh' --subject-prefix 'PATCH 6.1.y' HEAD^..
Possible dependencies:
thanks,
greg k-h
------------------ original commit in Linus's tree ------------------
From 466f7a2fef2a4e426f809f79845a1ec1aeb558f4 Mon Sep 17 00:00:00 2001
From: Sean Nyekjaer <sean(a)geanix.com>
Date: Mon, 1 Sep 2025 09:49:15 +0200
Subject: [PATCH] iio: imu: inv_icm42600: Avoid configuring if already
pm_runtime suspended
Do as in suspend, skip resume configuration steps if the device is already
pm_runtime suspended. This avoids reconfiguring a device that is already
in the correct low-power state and ensures that pm_runtime handles the
power state transitions properly.
Fixes: 31c24c1e93c3 ("iio: imu: inv_icm42600: add core of new inv_icm42600 driver")
Signed-off-by: Sean Nyekjaer <sean(a)geanix.com>
Link: https://patch.msgid.link/20250901-icm42pmreg-v3-3-ef1336246960@geanix.com
Cc: <Stable(a)vger.kernel.org>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron(a)huawei.com>
diff --git a/drivers/iio/imu/inv_icm42600/inv_icm42600_core.c b/drivers/iio/imu/inv_icm42600/inv_icm42600_core.c
index 41b275ecc7e2..ee780f530dc8 100644
--- a/drivers/iio/imu/inv_icm42600/inv_icm42600_core.c
+++ b/drivers/iio/imu/inv_icm42600/inv_icm42600_core.c
@@ -837,17 +837,15 @@ static int inv_icm42600_suspend(struct device *dev)
struct device *accel_dev;
bool wakeup;
int accel_conf;
- int ret;
+ int ret = 0;
mutex_lock(&st->lock);
st->suspended.gyro = st->conf.gyro.mode;
st->suspended.accel = st->conf.accel.mode;
st->suspended.temp = st->conf.temp_en;
- if (pm_runtime_suspended(dev)) {
- ret = 0;
+ if (pm_runtime_suspended(dev))
goto out_unlock;
- }
/* disable FIFO data streaming */
if (st->fifo.on) {
@@ -900,10 +898,13 @@ static int inv_icm42600_resume(struct device *dev)
struct inv_icm42600_sensor_state *accel_st = iio_priv(st->indio_accel);
struct device *accel_dev;
bool wakeup;
- int ret;
+ int ret = 0;
mutex_lock(&st->lock);
+ if (pm_runtime_suspended(dev))
+ goto out_unlock;
+
/* check wakeup capability */
accel_dev = &st->indio_accel->dev;
wakeup = st->apex.on && device_may_wakeup(accel_dev);
The patch below does not apply to the 6.6-stable tree.
If someone wants it applied there, or to any other stable or longterm
tree, then please email the backport, including the original git commit
id to <stable(a)vger.kernel.org>.
To reproduce the conflict and resubmit, you may use the following commands:
git fetch https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git/ linux-6.6.y
git checkout FETCH_HEAD
git cherry-pick -x 466f7a2fef2a4e426f809f79845a1ec1aeb558f4
# <resolve conflicts, build, test, etc.>
git commit -s
git send-email --to '<stable(a)vger.kernel.org>' --in-reply-to '2025101623-dry-crummiest-15b3@gregkh' --subject-prefix 'PATCH 6.6.y' HEAD^..
Possible dependencies:
thanks,
greg k-h
------------------ original commit in Linus's tree ------------------
From 466f7a2fef2a4e426f809f79845a1ec1aeb558f4 Mon Sep 17 00:00:00 2001
From: Sean Nyekjaer <sean(a)geanix.com>
Date: Mon, 1 Sep 2025 09:49:15 +0200
Subject: [PATCH] iio: imu: inv_icm42600: Avoid configuring if already
pm_runtime suspended
Do as in suspend, skip resume configuration steps if the device is already
pm_runtime suspended. This avoids reconfiguring a device that is already
in the correct low-power state and ensures that pm_runtime handles the
power state transitions properly.
Fixes: 31c24c1e93c3 ("iio: imu: inv_icm42600: add core of new inv_icm42600 driver")
Signed-off-by: Sean Nyekjaer <sean(a)geanix.com>
Link: https://patch.msgid.link/20250901-icm42pmreg-v3-3-ef1336246960@geanix.com
Cc: <Stable(a)vger.kernel.org>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron(a)huawei.com>
diff --git a/drivers/iio/imu/inv_icm42600/inv_icm42600_core.c b/drivers/iio/imu/inv_icm42600/inv_icm42600_core.c
index 41b275ecc7e2..ee780f530dc8 100644
--- a/drivers/iio/imu/inv_icm42600/inv_icm42600_core.c
+++ b/drivers/iio/imu/inv_icm42600/inv_icm42600_core.c
@@ -837,17 +837,15 @@ static int inv_icm42600_suspend(struct device *dev)
struct device *accel_dev;
bool wakeup;
int accel_conf;
- int ret;
+ int ret = 0;
mutex_lock(&st->lock);
st->suspended.gyro = st->conf.gyro.mode;
st->suspended.accel = st->conf.accel.mode;
st->suspended.temp = st->conf.temp_en;
- if (pm_runtime_suspended(dev)) {
- ret = 0;
+ if (pm_runtime_suspended(dev))
goto out_unlock;
- }
/* disable FIFO data streaming */
if (st->fifo.on) {
@@ -900,10 +898,13 @@ static int inv_icm42600_resume(struct device *dev)
struct inv_icm42600_sensor_state *accel_st = iio_priv(st->indio_accel);
struct device *accel_dev;
bool wakeup;
- int ret;
+ int ret = 0;
mutex_lock(&st->lock);
+ if (pm_runtime_suspended(dev))
+ goto out_unlock;
+
/* check wakeup capability */
accel_dev = &st->indio_accel->dev;
wakeup = st->apex.on && device_may_wakeup(accel_dev);
The patch below does not apply to the 6.12-stable tree.
If someone wants it applied there, or to any other stable or longterm
tree, then please email the backport, including the original git commit
id to <stable(a)vger.kernel.org>.
To reproduce the conflict and resubmit, you may use the following commands:
git fetch https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git/ linux-6.12.y
git checkout FETCH_HEAD
git cherry-pick -x 466f7a2fef2a4e426f809f79845a1ec1aeb558f4
# <resolve conflicts, build, test, etc.>
git commit -s
git send-email --to '<stable(a)vger.kernel.org>' --in-reply-to '2025101623-attractor-shopper-b67e@gregkh' --subject-prefix 'PATCH 6.12.y' HEAD^..
Possible dependencies:
thanks,
greg k-h
------------------ original commit in Linus's tree ------------------
From 466f7a2fef2a4e426f809f79845a1ec1aeb558f4 Mon Sep 17 00:00:00 2001
From: Sean Nyekjaer <sean(a)geanix.com>
Date: Mon, 1 Sep 2025 09:49:15 +0200
Subject: [PATCH] iio: imu: inv_icm42600: Avoid configuring if already
pm_runtime suspended
Do as in suspend, skip resume configuration steps if the device is already
pm_runtime suspended. This avoids reconfiguring a device that is already
in the correct low-power state and ensures that pm_runtime handles the
power state transitions properly.
Fixes: 31c24c1e93c3 ("iio: imu: inv_icm42600: add core of new inv_icm42600 driver")
Signed-off-by: Sean Nyekjaer <sean(a)geanix.com>
Link: https://patch.msgid.link/20250901-icm42pmreg-v3-3-ef1336246960@geanix.com
Cc: <Stable(a)vger.kernel.org>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron(a)huawei.com>
diff --git a/drivers/iio/imu/inv_icm42600/inv_icm42600_core.c b/drivers/iio/imu/inv_icm42600/inv_icm42600_core.c
index 41b275ecc7e2..ee780f530dc8 100644
--- a/drivers/iio/imu/inv_icm42600/inv_icm42600_core.c
+++ b/drivers/iio/imu/inv_icm42600/inv_icm42600_core.c
@@ -837,17 +837,15 @@ static int inv_icm42600_suspend(struct device *dev)
struct device *accel_dev;
bool wakeup;
int accel_conf;
- int ret;
+ int ret = 0;
mutex_lock(&st->lock);
st->suspended.gyro = st->conf.gyro.mode;
st->suspended.accel = st->conf.accel.mode;
st->suspended.temp = st->conf.temp_en;
- if (pm_runtime_suspended(dev)) {
- ret = 0;
+ if (pm_runtime_suspended(dev))
goto out_unlock;
- }
/* disable FIFO data streaming */
if (st->fifo.on) {
@@ -900,10 +898,13 @@ static int inv_icm42600_resume(struct device *dev)
struct inv_icm42600_sensor_state *accel_st = iio_priv(st->indio_accel);
struct device *accel_dev;
bool wakeup;
- int ret;
+ int ret = 0;
mutex_lock(&st->lock);
+ if (pm_runtime_suspended(dev))
+ goto out_unlock;
+
/* check wakeup capability */
accel_dev = &st->indio_accel->dev;
wakeup = st->apex.on && device_may_wakeup(accel_dev);
The patch below does not apply to the 5.10-stable tree.
If someone wants it applied there, or to any other stable or longterm
tree, then please email the backport, including the original git commit
id to <stable(a)vger.kernel.org>.
To reproduce the conflict and resubmit, you may use the following commands:
git fetch https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git/ linux-5.10.y
git checkout FETCH_HEAD
git cherry-pick -x 0792c1984a45ccd7a296d6b8cb78088bc99a212e
# <resolve conflicts, build, test, etc.>
git commit -s
git send-email --to '<stable(a)vger.kernel.org>' --in-reply-to '2025101603-magnetism-bonded-4bc7@gregkh' --subject-prefix 'PATCH 5.10.y' HEAD^..
Possible dependencies:
thanks,
greg k-h
------------------ original commit in Linus's tree ------------------
From 0792c1984a45ccd7a296d6b8cb78088bc99a212e Mon Sep 17 00:00:00 2001
From: Sean Nyekjaer <sean(a)geanix.com>
Date: Mon, 1 Sep 2025 09:49:13 +0200
Subject: [PATCH] iio: imu: inv_icm42600: Simplify pm_runtime setup
Rework the power management in inv_icm42600_core_probe() to use
devm_pm_runtime_set_active_enabled(), which simplifies the runtime PM
setup by handling activation and enabling in one step.
Remove the separate inv_icm42600_disable_pm callback, as it's no longer
needed with the devm-managed approach.
Using devm_pm_runtime_enable() also fixes the missing disable of
autosuspend.
Update inv_icm42600_disable_vddio_reg() to only disable the regulator if
the device is not suspended i.e. powered-down, preventing unbalanced
disables.
Also remove redundant error msg on regulator_disable(), the regulator
framework already emits an error message when regulator_disable() fails.
This simplifies the PM setup and avoids manipulating the usage counter
unnecessarily.
Fixes: 31c24c1e93c3 ("iio: imu: inv_icm42600: add core of new inv_icm42600 driver")
Signed-off-by: Sean Nyekjaer <sean(a)geanix.com>
Link: https://patch.msgid.link/20250901-icm42pmreg-v3-1-ef1336246960@geanix.com
Cc: <Stable(a)vger.kernel.org>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron(a)huawei.com>
diff --git a/drivers/iio/imu/inv_icm42600/inv_icm42600_core.c b/drivers/iio/imu/inv_icm42600/inv_icm42600_core.c
index a4d42e7e2180..76d8e4f14d87 100644
--- a/drivers/iio/imu/inv_icm42600/inv_icm42600_core.c
+++ b/drivers/iio/imu/inv_icm42600/inv_icm42600_core.c
@@ -711,20 +711,12 @@ static void inv_icm42600_disable_vdd_reg(void *_data)
static void inv_icm42600_disable_vddio_reg(void *_data)
{
struct inv_icm42600_state *st = _data;
- const struct device *dev = regmap_get_device(st->map);
- int ret;
+ struct device *dev = regmap_get_device(st->map);
- ret = regulator_disable(st->vddio_supply);
- if (ret)
- dev_err(dev, "failed to disable vddio error %d\n", ret);
-}
+ if (pm_runtime_status_suspended(dev))
+ return;
-static void inv_icm42600_disable_pm(void *_data)
-{
- struct device *dev = _data;
-
- pm_runtime_put_sync(dev);
- pm_runtime_disable(dev);
+ regulator_disable(st->vddio_supply);
}
int inv_icm42600_core_probe(struct regmap *regmap, int chip,
@@ -824,16 +816,14 @@ int inv_icm42600_core_probe(struct regmap *regmap, int chip,
return ret;
/* setup runtime power management */
- ret = pm_runtime_set_active(dev);
+ ret = devm_pm_runtime_set_active_enabled(dev);
if (ret)
return ret;
- pm_runtime_get_noresume(dev);
- pm_runtime_enable(dev);
+
pm_runtime_set_autosuspend_delay(dev, INV_ICM42600_SUSPEND_DELAY_MS);
pm_runtime_use_autosuspend(dev);
- pm_runtime_put(dev);
- return devm_add_action_or_reset(dev, inv_icm42600_disable_pm, dev);
+ return ret;
}
EXPORT_SYMBOL_NS_GPL(inv_icm42600_core_probe, "IIO_ICM42600");
The patch below does not apply to the 5.15-stable tree.
If someone wants it applied there, or to any other stable or longterm
tree, then please email the backport, including the original git commit
id to <stable(a)vger.kernel.org>.
To reproduce the conflict and resubmit, you may use the following commands:
git fetch https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git/ linux-5.15.y
git checkout FETCH_HEAD
git cherry-pick -x 0792c1984a45ccd7a296d6b8cb78088bc99a212e
# <resolve conflicts, build, test, etc.>
git commit -s
git send-email --to '<stable(a)vger.kernel.org>' --in-reply-to '2025101603-foster-panning-5b9a@gregkh' --subject-prefix 'PATCH 5.15.y' HEAD^..
Possible dependencies:
thanks,
greg k-h
------------------ original commit in Linus's tree ------------------
From 0792c1984a45ccd7a296d6b8cb78088bc99a212e Mon Sep 17 00:00:00 2001
From: Sean Nyekjaer <sean(a)geanix.com>
Date: Mon, 1 Sep 2025 09:49:13 +0200
Subject: [PATCH] iio: imu: inv_icm42600: Simplify pm_runtime setup
Rework the power management in inv_icm42600_core_probe() to use
devm_pm_runtime_set_active_enabled(), which simplifies the runtime PM
setup by handling activation and enabling in one step.
Remove the separate inv_icm42600_disable_pm callback, as it's no longer
needed with the devm-managed approach.
Using devm_pm_runtime_enable() also fixes the missing disable of
autosuspend.
Update inv_icm42600_disable_vddio_reg() to only disable the regulator if
the device is not suspended i.e. powered-down, preventing unbalanced
disables.
Also remove redundant error msg on regulator_disable(), the regulator
framework already emits an error message when regulator_disable() fails.
This simplifies the PM setup and avoids manipulating the usage counter
unnecessarily.
Fixes: 31c24c1e93c3 ("iio: imu: inv_icm42600: add core of new inv_icm42600 driver")
Signed-off-by: Sean Nyekjaer <sean(a)geanix.com>
Link: https://patch.msgid.link/20250901-icm42pmreg-v3-1-ef1336246960@geanix.com
Cc: <Stable(a)vger.kernel.org>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron(a)huawei.com>
diff --git a/drivers/iio/imu/inv_icm42600/inv_icm42600_core.c b/drivers/iio/imu/inv_icm42600/inv_icm42600_core.c
index a4d42e7e2180..76d8e4f14d87 100644
--- a/drivers/iio/imu/inv_icm42600/inv_icm42600_core.c
+++ b/drivers/iio/imu/inv_icm42600/inv_icm42600_core.c
@@ -711,20 +711,12 @@ static void inv_icm42600_disable_vdd_reg(void *_data)
static void inv_icm42600_disable_vddio_reg(void *_data)
{
struct inv_icm42600_state *st = _data;
- const struct device *dev = regmap_get_device(st->map);
- int ret;
+ struct device *dev = regmap_get_device(st->map);
- ret = regulator_disable(st->vddio_supply);
- if (ret)
- dev_err(dev, "failed to disable vddio error %d\n", ret);
-}
+ if (pm_runtime_status_suspended(dev))
+ return;
-static void inv_icm42600_disable_pm(void *_data)
-{
- struct device *dev = _data;
-
- pm_runtime_put_sync(dev);
- pm_runtime_disable(dev);
+ regulator_disable(st->vddio_supply);
}
int inv_icm42600_core_probe(struct regmap *regmap, int chip,
@@ -824,16 +816,14 @@ int inv_icm42600_core_probe(struct regmap *regmap, int chip,
return ret;
/* setup runtime power management */
- ret = pm_runtime_set_active(dev);
+ ret = devm_pm_runtime_set_active_enabled(dev);
if (ret)
return ret;
- pm_runtime_get_noresume(dev);
- pm_runtime_enable(dev);
+
pm_runtime_set_autosuspend_delay(dev, INV_ICM42600_SUSPEND_DELAY_MS);
pm_runtime_use_autosuspend(dev);
- pm_runtime_put(dev);
- return devm_add_action_or_reset(dev, inv_icm42600_disable_pm, dev);
+ return ret;
}
EXPORT_SYMBOL_NS_GPL(inv_icm42600_core_probe, "IIO_ICM42600");
The patch below does not apply to the 6.1-stable tree.
If someone wants it applied there, or to any other stable or longterm
tree, then please email the backport, including the original git commit
id to <stable(a)vger.kernel.org>.
To reproduce the conflict and resubmit, you may use the following commands:
git fetch https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git/ linux-6.1.y
git checkout FETCH_HEAD
git cherry-pick -x 0792c1984a45ccd7a296d6b8cb78088bc99a212e
# <resolve conflicts, build, test, etc.>
git commit -s
git send-email --to '<stable(a)vger.kernel.org>' --in-reply-to '2025101602-monogram-ferry-a69a@gregkh' --subject-prefix 'PATCH 6.1.y' HEAD^..
Possible dependencies:
thanks,
greg k-h
------------------ original commit in Linus's tree ------------------
From 0792c1984a45ccd7a296d6b8cb78088bc99a212e Mon Sep 17 00:00:00 2001
From: Sean Nyekjaer <sean(a)geanix.com>
Date: Mon, 1 Sep 2025 09:49:13 +0200
Subject: [PATCH] iio: imu: inv_icm42600: Simplify pm_runtime setup
Rework the power management in inv_icm42600_core_probe() to use
devm_pm_runtime_set_active_enabled(), which simplifies the runtime PM
setup by handling activation and enabling in one step.
Remove the separate inv_icm42600_disable_pm callback, as it's no longer
needed with the devm-managed approach.
Using devm_pm_runtime_enable() also fixes the missing disable of
autosuspend.
Update inv_icm42600_disable_vddio_reg() to only disable the regulator if
the device is not suspended i.e. powered-down, preventing unbalanced
disables.
Also remove redundant error msg on regulator_disable(), the regulator
framework already emits an error message when regulator_disable() fails.
This simplifies the PM setup and avoids manipulating the usage counter
unnecessarily.
Fixes: 31c24c1e93c3 ("iio: imu: inv_icm42600: add core of new inv_icm42600 driver")
Signed-off-by: Sean Nyekjaer <sean(a)geanix.com>
Link: https://patch.msgid.link/20250901-icm42pmreg-v3-1-ef1336246960@geanix.com
Cc: <Stable(a)vger.kernel.org>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron(a)huawei.com>
diff --git a/drivers/iio/imu/inv_icm42600/inv_icm42600_core.c b/drivers/iio/imu/inv_icm42600/inv_icm42600_core.c
index a4d42e7e2180..76d8e4f14d87 100644
--- a/drivers/iio/imu/inv_icm42600/inv_icm42600_core.c
+++ b/drivers/iio/imu/inv_icm42600/inv_icm42600_core.c
@@ -711,20 +711,12 @@ static void inv_icm42600_disable_vdd_reg(void *_data)
static void inv_icm42600_disable_vddio_reg(void *_data)
{
struct inv_icm42600_state *st = _data;
- const struct device *dev = regmap_get_device(st->map);
- int ret;
+ struct device *dev = regmap_get_device(st->map);
- ret = regulator_disable(st->vddio_supply);
- if (ret)
- dev_err(dev, "failed to disable vddio error %d\n", ret);
-}
+ if (pm_runtime_status_suspended(dev))
+ return;
-static void inv_icm42600_disable_pm(void *_data)
-{
- struct device *dev = _data;
-
- pm_runtime_put_sync(dev);
- pm_runtime_disable(dev);
+ regulator_disable(st->vddio_supply);
}
int inv_icm42600_core_probe(struct regmap *regmap, int chip,
@@ -824,16 +816,14 @@ int inv_icm42600_core_probe(struct regmap *regmap, int chip,
return ret;
/* setup runtime power management */
- ret = pm_runtime_set_active(dev);
+ ret = devm_pm_runtime_set_active_enabled(dev);
if (ret)
return ret;
- pm_runtime_get_noresume(dev);
- pm_runtime_enable(dev);
+
pm_runtime_set_autosuspend_delay(dev, INV_ICM42600_SUSPEND_DELAY_MS);
pm_runtime_use_autosuspend(dev);
- pm_runtime_put(dev);
- return devm_add_action_or_reset(dev, inv_icm42600_disable_pm, dev);
+ return ret;
}
EXPORT_SYMBOL_NS_GPL(inv_icm42600_core_probe, "IIO_ICM42600");
The patch below does not apply to the 6.6-stable tree.
If someone wants it applied there, or to any other stable or longterm
tree, then please email the backport, including the original git commit
id to <stable(a)vger.kernel.org>.
To reproduce the conflict and resubmit, you may use the following commands:
git fetch https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git/ linux-6.6.y
git checkout FETCH_HEAD
git cherry-pick -x 0792c1984a45ccd7a296d6b8cb78088bc99a212e
# <resolve conflicts, build, test, etc.>
git commit -s
git send-email --to '<stable(a)vger.kernel.org>' --in-reply-to '2025101601-document-unwound-ffc9@gregkh' --subject-prefix 'PATCH 6.6.y' HEAD^..
Possible dependencies:
thanks,
greg k-h
------------------ original commit in Linus's tree ------------------
From 0792c1984a45ccd7a296d6b8cb78088bc99a212e Mon Sep 17 00:00:00 2001
From: Sean Nyekjaer <sean(a)geanix.com>
Date: Mon, 1 Sep 2025 09:49:13 +0200
Subject: [PATCH] iio: imu: inv_icm42600: Simplify pm_runtime setup
Rework the power management in inv_icm42600_core_probe() to use
devm_pm_runtime_set_active_enabled(), which simplifies the runtime PM
setup by handling activation and enabling in one step.
Remove the separate inv_icm42600_disable_pm callback, as it's no longer
needed with the devm-managed approach.
Using devm_pm_runtime_enable() also fixes the missing disable of
autosuspend.
Update inv_icm42600_disable_vddio_reg() to only disable the regulator if
the device is not suspended i.e. powered-down, preventing unbalanced
disables.
Also remove redundant error msg on regulator_disable(), the regulator
framework already emits an error message when regulator_disable() fails.
This simplifies the PM setup and avoids manipulating the usage counter
unnecessarily.
Fixes: 31c24c1e93c3 ("iio: imu: inv_icm42600: add core of new inv_icm42600 driver")
Signed-off-by: Sean Nyekjaer <sean(a)geanix.com>
Link: https://patch.msgid.link/20250901-icm42pmreg-v3-1-ef1336246960@geanix.com
Cc: <Stable(a)vger.kernel.org>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron(a)huawei.com>
diff --git a/drivers/iio/imu/inv_icm42600/inv_icm42600_core.c b/drivers/iio/imu/inv_icm42600/inv_icm42600_core.c
index a4d42e7e2180..76d8e4f14d87 100644
--- a/drivers/iio/imu/inv_icm42600/inv_icm42600_core.c
+++ b/drivers/iio/imu/inv_icm42600/inv_icm42600_core.c
@@ -711,20 +711,12 @@ static void inv_icm42600_disable_vdd_reg(void *_data)
static void inv_icm42600_disable_vddio_reg(void *_data)
{
struct inv_icm42600_state *st = _data;
- const struct device *dev = regmap_get_device(st->map);
- int ret;
+ struct device *dev = regmap_get_device(st->map);
- ret = regulator_disable(st->vddio_supply);
- if (ret)
- dev_err(dev, "failed to disable vddio error %d\n", ret);
-}
+ if (pm_runtime_status_suspended(dev))
+ return;
-static void inv_icm42600_disable_pm(void *_data)
-{
- struct device *dev = _data;
-
- pm_runtime_put_sync(dev);
- pm_runtime_disable(dev);
+ regulator_disable(st->vddio_supply);
}
int inv_icm42600_core_probe(struct regmap *regmap, int chip,
@@ -824,16 +816,14 @@ int inv_icm42600_core_probe(struct regmap *regmap, int chip,
return ret;
/* setup runtime power management */
- ret = pm_runtime_set_active(dev);
+ ret = devm_pm_runtime_set_active_enabled(dev);
if (ret)
return ret;
- pm_runtime_get_noresume(dev);
- pm_runtime_enable(dev);
+
pm_runtime_set_autosuspend_delay(dev, INV_ICM42600_SUSPEND_DELAY_MS);
pm_runtime_use_autosuspend(dev);
- pm_runtime_put(dev);
- return devm_add_action_or_reset(dev, inv_icm42600_disable_pm, dev);
+ return ret;
}
EXPORT_SYMBOL_NS_GPL(inv_icm42600_core_probe, "IIO_ICM42600");
The patch below does not apply to the 6.12-stable tree.
If someone wants it applied there, or to any other stable or longterm
tree, then please email the backport, including the original git commit
id to <stable(a)vger.kernel.org>.
To reproduce the conflict and resubmit, you may use the following commands:
git fetch https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git/ linux-6.12.y
git checkout FETCH_HEAD
git cherry-pick -x 0792c1984a45ccd7a296d6b8cb78088bc99a212e
# <resolve conflicts, build, test, etc.>
git commit -s
git send-email --to '<stable(a)vger.kernel.org>' --in-reply-to '2025101601-manicure-opposite-4330@gregkh' --subject-prefix 'PATCH 6.12.y' HEAD^..
Possible dependencies:
thanks,
greg k-h
------------------ original commit in Linus's tree ------------------
From 0792c1984a45ccd7a296d6b8cb78088bc99a212e Mon Sep 17 00:00:00 2001
From: Sean Nyekjaer <sean(a)geanix.com>
Date: Mon, 1 Sep 2025 09:49:13 +0200
Subject: [PATCH] iio: imu: inv_icm42600: Simplify pm_runtime setup
Rework the power management in inv_icm42600_core_probe() to use
devm_pm_runtime_set_active_enabled(), which simplifies the runtime PM
setup by handling activation and enabling in one step.
Remove the separate inv_icm42600_disable_pm callback, as it's no longer
needed with the devm-managed approach.
Using devm_pm_runtime_enable() also fixes the missing disable of
autosuspend.
Update inv_icm42600_disable_vddio_reg() to only disable the regulator if
the device is not suspended i.e. powered-down, preventing unbalanced
disables.
Also remove redundant error msg on regulator_disable(), the regulator
framework already emits an error message when regulator_disable() fails.
This simplifies the PM setup and avoids manipulating the usage counter
unnecessarily.
Fixes: 31c24c1e93c3 ("iio: imu: inv_icm42600: add core of new inv_icm42600 driver")
Signed-off-by: Sean Nyekjaer <sean(a)geanix.com>
Link: https://patch.msgid.link/20250901-icm42pmreg-v3-1-ef1336246960@geanix.com
Cc: <Stable(a)vger.kernel.org>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron(a)huawei.com>
diff --git a/drivers/iio/imu/inv_icm42600/inv_icm42600_core.c b/drivers/iio/imu/inv_icm42600/inv_icm42600_core.c
index a4d42e7e2180..76d8e4f14d87 100644
--- a/drivers/iio/imu/inv_icm42600/inv_icm42600_core.c
+++ b/drivers/iio/imu/inv_icm42600/inv_icm42600_core.c
@@ -711,20 +711,12 @@ static void inv_icm42600_disable_vdd_reg(void *_data)
static void inv_icm42600_disable_vddio_reg(void *_data)
{
struct inv_icm42600_state *st = _data;
- const struct device *dev = regmap_get_device(st->map);
- int ret;
+ struct device *dev = regmap_get_device(st->map);
- ret = regulator_disable(st->vddio_supply);
- if (ret)
- dev_err(dev, "failed to disable vddio error %d\n", ret);
-}
+ if (pm_runtime_status_suspended(dev))
+ return;
-static void inv_icm42600_disable_pm(void *_data)
-{
- struct device *dev = _data;
-
- pm_runtime_put_sync(dev);
- pm_runtime_disable(dev);
+ regulator_disable(st->vddio_supply);
}
int inv_icm42600_core_probe(struct regmap *regmap, int chip,
@@ -824,16 +816,14 @@ int inv_icm42600_core_probe(struct regmap *regmap, int chip,
return ret;
/* setup runtime power management */
- ret = pm_runtime_set_active(dev);
+ ret = devm_pm_runtime_set_active_enabled(dev);
if (ret)
return ret;
- pm_runtime_get_noresume(dev);
- pm_runtime_enable(dev);
+
pm_runtime_set_autosuspend_delay(dev, INV_ICM42600_SUSPEND_DELAY_MS);
pm_runtime_use_autosuspend(dev);
- pm_runtime_put(dev);
- return devm_add_action_or_reset(dev, inv_icm42600_disable_pm, dev);
+ return ret;
}
EXPORT_SYMBOL_NS_GPL(inv_icm42600_core_probe, "IIO_ICM42600");
The patch below does not apply to the 6.1-stable tree.
If someone wants it applied there, or to any other stable or longterm
tree, then please email the backport, including the original git commit
id to <stable(a)vger.kernel.org>.
To reproduce the conflict and resubmit, you may use the following commands:
git fetch https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git/ linux-6.1.y
git checkout FETCH_HEAD
git cherry-pick -x 284fb19a3ffb1083c3ad9c00d29749d09dddb99c
# <resolve conflicts, build, test, etc.>
git commit -s
git send-email --to '<stable(a)vger.kernel.org>' --in-reply-to '2025101614-sphere-flagman-052d@gregkh' --subject-prefix 'PATCH 6.1.y' HEAD^..
Possible dependencies:
thanks,
greg k-h
------------------ original commit in Linus's tree ------------------
From 284fb19a3ffb1083c3ad9c00d29749d09dddb99c Mon Sep 17 00:00:00 2001
From: Devarsh Thakkar <devarsht(a)ti.com>
Date: Fri, 4 Jul 2025 18:29:14 +0530
Subject: [PATCH] phy: cadence: cdns-dphy: Fix PLL lock and O_CMN_READY polling
PLL lockup and O_CMN_READY assertion can only happen after common state
machine gets enabled by programming DPHY_CMN_SSM register, but driver was
polling them before the common state machine was enabled which is
incorrect. This is as per the DPHY initialization sequence as mentioned in
J721E TRM [1] at section "12.7.2.4.1.2.1 Start-up Sequence Timing Diagram".
It shows O_CMN_READY polling at the end after common configuration pin
setup where the common configuration pin setup step enables state machine
as referenced in "Table 12-1533. Common Configuration-Related Setup
mentions state machine"
To fix this :
- Add new function callbacks for polling on PLL lock and O_CMN_READY
assertion.
- As state machine and clocks get enabled in power_on callback only, move
the clock related programming part from configure callback to power_on
callback and poll for the PLL lockup and O_CMN_READY assertion after state
machine gets enabled.
- The configure callback only saves the PLL configuration received from the
client driver which will be applied later on in power_on callback.
- Add checks to ensure configure is called before power_on and state
machine is in disabled state before power_on callback is called.
- Disable state machine in power_off so that client driver can re-configure
the PLL by following up a power_off, configure, power_on sequence.
[1]: https://www.ti.com/lit/zip/spruil1
Cc: stable(a)vger.kernel.org
Fixes: 7a343c8bf4b5 ("phy: Add Cadence D-PHY support")
Signed-off-by: Devarsh Thakkar <devarsht(a)ti.com>
Tested-by: Harikrishna Shenoy <h-shenoy(a)ti.com>
Reviewed-by: Tomi Valkeinen <tomi.valkeinen(a)ideasonboard.com>
Link: https://lore.kernel.org/r/20250704125915.1224738-2-devarsht@ti.com
Signed-off-by: Vinod Koul <vkoul(a)kernel.org>
diff --git a/drivers/phy/cadence/cdns-dphy.c b/drivers/phy/cadence/cdns-dphy.c
index 33a42e72362e..da8de0a9d086 100644
--- a/drivers/phy/cadence/cdns-dphy.c
+++ b/drivers/phy/cadence/cdns-dphy.c
@@ -92,6 +92,8 @@ struct cdns_dphy_ops {
void (*set_pll_cfg)(struct cdns_dphy *dphy,
const struct cdns_dphy_cfg *cfg);
unsigned long (*get_wakeup_time_ns)(struct cdns_dphy *dphy);
+ int (*wait_for_pll_lock)(struct cdns_dphy *dphy);
+ int (*wait_for_cmn_ready)(struct cdns_dphy *dphy);
};
struct cdns_dphy {
@@ -101,6 +103,8 @@ struct cdns_dphy {
struct clk *pll_ref_clk;
const struct cdns_dphy_ops *ops;
struct phy *phy;
+ bool is_configured;
+ bool is_powered;
};
/* Order of bands is important since the index is the band number. */
@@ -186,6 +190,16 @@ static unsigned long cdns_dphy_get_wakeup_time_ns(struct cdns_dphy *dphy)
return dphy->ops->get_wakeup_time_ns(dphy);
}
+static int cdns_dphy_wait_for_pll_lock(struct cdns_dphy *dphy)
+{
+ return dphy->ops->wait_for_pll_lock ? dphy->ops->wait_for_pll_lock(dphy) : 0;
+}
+
+static int cdns_dphy_wait_for_cmn_ready(struct cdns_dphy *dphy)
+{
+ return dphy->ops->wait_for_cmn_ready ? dphy->ops->wait_for_cmn_ready(dphy) : 0;
+}
+
static unsigned long cdns_dphy_ref_get_wakeup_time_ns(struct cdns_dphy *dphy)
{
/* Default wakeup time is 800 ns (in a simulated environment). */
@@ -227,7 +241,6 @@ static unsigned long cdns_dphy_j721e_get_wakeup_time_ns(struct cdns_dphy *dphy)
static void cdns_dphy_j721e_set_pll_cfg(struct cdns_dphy *dphy,
const struct cdns_dphy_cfg *cfg)
{
- u32 status;
/*
* set the PWM and PLL Byteclk divider settings to recommended values
@@ -244,13 +257,6 @@ static void cdns_dphy_j721e_set_pll_cfg(struct cdns_dphy *dphy,
writel(DPHY_TX_J721E_WIZ_LANE_RSTB,
dphy->regs + DPHY_TX_J721E_WIZ_RST_CTRL);
-
- readl_poll_timeout(dphy->regs + DPHY_TX_J721E_WIZ_PLL_CTRL, status,
- (status & DPHY_TX_WIZ_PLL_LOCK), 0, POLL_TIMEOUT_US);
-
- readl_poll_timeout(dphy->regs + DPHY_TX_J721E_WIZ_STATUS, status,
- (status & DPHY_TX_WIZ_O_CMN_READY), 0,
- POLL_TIMEOUT_US);
}
static void cdns_dphy_j721e_set_psm_div(struct cdns_dphy *dphy, u8 div)
@@ -258,6 +264,23 @@ static void cdns_dphy_j721e_set_psm_div(struct cdns_dphy *dphy, u8 div)
writel(div, dphy->regs + DPHY_TX_J721E_WIZ_PSM_FREQ);
}
+static int cdns_dphy_j721e_wait_for_pll_lock(struct cdns_dphy *dphy)
+{
+ u32 status;
+
+ return readl_poll_timeout(dphy->regs + DPHY_TX_J721E_WIZ_PLL_CTRL, status,
+ status & DPHY_TX_WIZ_PLL_LOCK, 0, POLL_TIMEOUT_US);
+}
+
+static int cdns_dphy_j721e_wait_for_cmn_ready(struct cdns_dphy *dphy)
+{
+ u32 status;
+
+ return readl_poll_timeout(dphy->regs + DPHY_TX_J721E_WIZ_STATUS, status,
+ status & DPHY_TX_WIZ_O_CMN_READY, 0,
+ POLL_TIMEOUT_US);
+}
+
/*
* This is the reference implementation of DPHY hooks. Specific integration of
* this IP may have to re-implement some of them depending on how they decided
@@ -273,6 +296,8 @@ static const struct cdns_dphy_ops j721e_dphy_ops = {
.get_wakeup_time_ns = cdns_dphy_j721e_get_wakeup_time_ns,
.set_pll_cfg = cdns_dphy_j721e_set_pll_cfg,
.set_psm_div = cdns_dphy_j721e_set_psm_div,
+ .wait_for_pll_lock = cdns_dphy_j721e_wait_for_pll_lock,
+ .wait_for_cmn_ready = cdns_dphy_j721e_wait_for_cmn_ready,
};
static int cdns_dphy_config_from_opts(struct phy *phy,
@@ -328,21 +353,36 @@ static int cdns_dphy_validate(struct phy *phy, enum phy_mode mode, int submode,
static int cdns_dphy_configure(struct phy *phy, union phy_configure_opts *opts)
{
struct cdns_dphy *dphy = phy_get_drvdata(phy);
- struct cdns_dphy_cfg cfg = { 0 };
- int ret, band_ctrl;
- unsigned int reg;
+ int ret;
- ret = cdns_dphy_config_from_opts(phy, &opts->mipi_dphy, &cfg);
- if (ret)
- return ret;
+ ret = cdns_dphy_config_from_opts(phy, &opts->mipi_dphy, &dphy->cfg);
+ if (!ret)
+ dphy->is_configured = true;
+
+ return ret;
+}
+
+static int cdns_dphy_power_on(struct phy *phy)
+{
+ struct cdns_dphy *dphy = phy_get_drvdata(phy);
+ int ret;
+ u32 reg;
+
+ if (!dphy->is_configured || dphy->is_powered)
+ return -EINVAL;
+
+ clk_prepare_enable(dphy->psm_clk);
+ clk_prepare_enable(dphy->pll_ref_clk);
/*
* Configure the internal PSM clk divider so that the DPHY has a
* 1MHz clk (or something close).
*/
ret = cdns_dphy_setup_psm(dphy);
- if (ret)
- return ret;
+ if (ret) {
+ dev_err(&dphy->phy->dev, "Failed to setup PSM with error %d\n", ret);
+ goto err_power_on;
+ }
/*
* Configure attach clk lanes to data lanes: the DPHY has 2 clk lanes
@@ -357,40 +397,60 @@ static int cdns_dphy_configure(struct phy *phy, union phy_configure_opts *opts)
* Configure the DPHY PLL that will be used to generate the TX byte
* clk.
*/
- cdns_dphy_set_pll_cfg(dphy, &cfg);
+ cdns_dphy_set_pll_cfg(dphy, &dphy->cfg);
- band_ctrl = cdns_dphy_tx_get_band_ctrl(opts->mipi_dphy.hs_clk_rate);
- if (band_ctrl < 0)
- return band_ctrl;
+ ret = cdns_dphy_tx_get_band_ctrl(dphy->cfg.hs_clk_rate);
+ if (ret < 0) {
+ dev_err(&dphy->phy->dev, "Failed to get band control value with error %d\n", ret);
+ goto err_power_on;
+ }
- reg = FIELD_PREP(DPHY_BAND_CFG_LEFT_BAND, band_ctrl) |
- FIELD_PREP(DPHY_BAND_CFG_RIGHT_BAND, band_ctrl);
+ reg = FIELD_PREP(DPHY_BAND_CFG_LEFT_BAND, ret) |
+ FIELD_PREP(DPHY_BAND_CFG_RIGHT_BAND, ret);
writel(reg, dphy->regs + DPHY_BAND_CFG);
- return 0;
-}
-
-static int cdns_dphy_power_on(struct phy *phy)
-{
- struct cdns_dphy *dphy = phy_get_drvdata(phy);
-
- clk_prepare_enable(dphy->psm_clk);
- clk_prepare_enable(dphy->pll_ref_clk);
-
/* Start TX state machine. */
writel(DPHY_CMN_SSM_EN | DPHY_CMN_TX_MODE_EN,
dphy->regs + DPHY_CMN_SSM);
+ ret = cdns_dphy_wait_for_pll_lock(dphy);
+ if (ret) {
+ dev_err(&dphy->phy->dev, "Failed to lock PLL with error %d\n", ret);
+ goto err_power_on;
+ }
+
+ ret = cdns_dphy_wait_for_cmn_ready(dphy);
+ if (ret) {
+ dev_err(&dphy->phy->dev, "O_CMN_READY signal failed to assert with error %d\n",
+ ret);
+ goto err_power_on;
+ }
+
+ dphy->is_powered = true;
+
return 0;
+
+err_power_on:
+ clk_disable_unprepare(dphy->pll_ref_clk);
+ clk_disable_unprepare(dphy->psm_clk);
+
+ return ret;
}
static int cdns_dphy_power_off(struct phy *phy)
{
struct cdns_dphy *dphy = phy_get_drvdata(phy);
+ u32 reg;
clk_disable_unprepare(dphy->pll_ref_clk);
clk_disable_unprepare(dphy->psm_clk);
+ /* Stop TX state machine. */
+ reg = readl(dphy->regs + DPHY_CMN_SSM);
+ writel(reg & ~DPHY_CMN_SSM_EN, dphy->regs + DPHY_CMN_SSM);
+
+ dphy->is_powered = false;
+
return 0;
}
The patch below does not apply to the 6.6-stable tree.
If someone wants it applied there, or to any other stable or longterm
tree, then please email the backport, including the original git commit
id to <stable(a)vger.kernel.org>.
To reproduce the conflict and resubmit, you may use the following commands:
git fetch https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git/ linux-6.6.y
git checkout FETCH_HEAD
git cherry-pick -x 284fb19a3ffb1083c3ad9c00d29749d09dddb99c
# <resolve conflicts, build, test, etc.>
git commit -s
git send-email --to '<stable(a)vger.kernel.org>' --in-reply-to '2025101614-lisp-bucktooth-cc0e@gregkh' --subject-prefix 'PATCH 6.6.y' HEAD^..
Possible dependencies:
thanks,
greg k-h
------------------ original commit in Linus's tree ------------------
From 284fb19a3ffb1083c3ad9c00d29749d09dddb99c Mon Sep 17 00:00:00 2001
From: Devarsh Thakkar <devarsht(a)ti.com>
Date: Fri, 4 Jul 2025 18:29:14 +0530
Subject: [PATCH] phy: cadence: cdns-dphy: Fix PLL lock and O_CMN_READY polling
PLL lockup and O_CMN_READY assertion can only happen after common state
machine gets enabled by programming DPHY_CMN_SSM register, but driver was
polling them before the common state machine was enabled which is
incorrect. This is as per the DPHY initialization sequence as mentioned in
J721E TRM [1] at section "12.7.2.4.1.2.1 Start-up Sequence Timing Diagram".
It shows O_CMN_READY polling at the end after common configuration pin
setup where the common configuration pin setup step enables state machine
as referenced in "Table 12-1533. Common Configuration-Related Setup
mentions state machine"
To fix this :
- Add new function callbacks for polling on PLL lock and O_CMN_READY
assertion.
- As state machine and clocks get enabled in power_on callback only, move
the clock related programming part from configure callback to power_on
callback and poll for the PLL lockup and O_CMN_READY assertion after state
machine gets enabled.
- The configure callback only saves the PLL configuration received from the
client driver which will be applied later on in power_on callback.
- Add checks to ensure configure is called before power_on and state
machine is in disabled state before power_on callback is called.
- Disable state machine in power_off so that client driver can re-configure
the PLL by following up a power_off, configure, power_on sequence.
[1]: https://www.ti.com/lit/zip/spruil1
Cc: stable(a)vger.kernel.org
Fixes: 7a343c8bf4b5 ("phy: Add Cadence D-PHY support")
Signed-off-by: Devarsh Thakkar <devarsht(a)ti.com>
Tested-by: Harikrishna Shenoy <h-shenoy(a)ti.com>
Reviewed-by: Tomi Valkeinen <tomi.valkeinen(a)ideasonboard.com>
Link: https://lore.kernel.org/r/20250704125915.1224738-2-devarsht@ti.com
Signed-off-by: Vinod Koul <vkoul(a)kernel.org>
diff --git a/drivers/phy/cadence/cdns-dphy.c b/drivers/phy/cadence/cdns-dphy.c
index 33a42e72362e..da8de0a9d086 100644
--- a/drivers/phy/cadence/cdns-dphy.c
+++ b/drivers/phy/cadence/cdns-dphy.c
@@ -92,6 +92,8 @@ struct cdns_dphy_ops {
void (*set_pll_cfg)(struct cdns_dphy *dphy,
const struct cdns_dphy_cfg *cfg);
unsigned long (*get_wakeup_time_ns)(struct cdns_dphy *dphy);
+ int (*wait_for_pll_lock)(struct cdns_dphy *dphy);
+ int (*wait_for_cmn_ready)(struct cdns_dphy *dphy);
};
struct cdns_dphy {
@@ -101,6 +103,8 @@ struct cdns_dphy {
struct clk *pll_ref_clk;
const struct cdns_dphy_ops *ops;
struct phy *phy;
+ bool is_configured;
+ bool is_powered;
};
/* Order of bands is important since the index is the band number. */
@@ -186,6 +190,16 @@ static unsigned long cdns_dphy_get_wakeup_time_ns(struct cdns_dphy *dphy)
return dphy->ops->get_wakeup_time_ns(dphy);
}
+static int cdns_dphy_wait_for_pll_lock(struct cdns_dphy *dphy)
+{
+ return dphy->ops->wait_for_pll_lock ? dphy->ops->wait_for_pll_lock(dphy) : 0;
+}
+
+static int cdns_dphy_wait_for_cmn_ready(struct cdns_dphy *dphy)
+{
+ return dphy->ops->wait_for_cmn_ready ? dphy->ops->wait_for_cmn_ready(dphy) : 0;
+}
+
static unsigned long cdns_dphy_ref_get_wakeup_time_ns(struct cdns_dphy *dphy)
{
/* Default wakeup time is 800 ns (in a simulated environment). */
@@ -227,7 +241,6 @@ static unsigned long cdns_dphy_j721e_get_wakeup_time_ns(struct cdns_dphy *dphy)
static void cdns_dphy_j721e_set_pll_cfg(struct cdns_dphy *dphy,
const struct cdns_dphy_cfg *cfg)
{
- u32 status;
/*
* set the PWM and PLL Byteclk divider settings to recommended values
@@ -244,13 +257,6 @@ static void cdns_dphy_j721e_set_pll_cfg(struct cdns_dphy *dphy,
writel(DPHY_TX_J721E_WIZ_LANE_RSTB,
dphy->regs + DPHY_TX_J721E_WIZ_RST_CTRL);
-
- readl_poll_timeout(dphy->regs + DPHY_TX_J721E_WIZ_PLL_CTRL, status,
- (status & DPHY_TX_WIZ_PLL_LOCK), 0, POLL_TIMEOUT_US);
-
- readl_poll_timeout(dphy->regs + DPHY_TX_J721E_WIZ_STATUS, status,
- (status & DPHY_TX_WIZ_O_CMN_READY), 0,
- POLL_TIMEOUT_US);
}
static void cdns_dphy_j721e_set_psm_div(struct cdns_dphy *dphy, u8 div)
@@ -258,6 +264,23 @@ static void cdns_dphy_j721e_set_psm_div(struct cdns_dphy *dphy, u8 div)
writel(div, dphy->regs + DPHY_TX_J721E_WIZ_PSM_FREQ);
}
+static int cdns_dphy_j721e_wait_for_pll_lock(struct cdns_dphy *dphy)
+{
+ u32 status;
+
+ return readl_poll_timeout(dphy->regs + DPHY_TX_J721E_WIZ_PLL_CTRL, status,
+ status & DPHY_TX_WIZ_PLL_LOCK, 0, POLL_TIMEOUT_US);
+}
+
+static int cdns_dphy_j721e_wait_for_cmn_ready(struct cdns_dphy *dphy)
+{
+ u32 status;
+
+ return readl_poll_timeout(dphy->regs + DPHY_TX_J721E_WIZ_STATUS, status,
+ status & DPHY_TX_WIZ_O_CMN_READY, 0,
+ POLL_TIMEOUT_US);
+}
+
/*
* This is the reference implementation of DPHY hooks. Specific integration of
* this IP may have to re-implement some of them depending on how they decided
@@ -273,6 +296,8 @@ static const struct cdns_dphy_ops j721e_dphy_ops = {
.get_wakeup_time_ns = cdns_dphy_j721e_get_wakeup_time_ns,
.set_pll_cfg = cdns_dphy_j721e_set_pll_cfg,
.set_psm_div = cdns_dphy_j721e_set_psm_div,
+ .wait_for_pll_lock = cdns_dphy_j721e_wait_for_pll_lock,
+ .wait_for_cmn_ready = cdns_dphy_j721e_wait_for_cmn_ready,
};
static int cdns_dphy_config_from_opts(struct phy *phy,
@@ -328,21 +353,36 @@ static int cdns_dphy_validate(struct phy *phy, enum phy_mode mode, int submode,
static int cdns_dphy_configure(struct phy *phy, union phy_configure_opts *opts)
{
struct cdns_dphy *dphy = phy_get_drvdata(phy);
- struct cdns_dphy_cfg cfg = { 0 };
- int ret, band_ctrl;
- unsigned int reg;
+ int ret;
- ret = cdns_dphy_config_from_opts(phy, &opts->mipi_dphy, &cfg);
- if (ret)
- return ret;
+ ret = cdns_dphy_config_from_opts(phy, &opts->mipi_dphy, &dphy->cfg);
+ if (!ret)
+ dphy->is_configured = true;
+
+ return ret;
+}
+
+static int cdns_dphy_power_on(struct phy *phy)
+{
+ struct cdns_dphy *dphy = phy_get_drvdata(phy);
+ int ret;
+ u32 reg;
+
+ if (!dphy->is_configured || dphy->is_powered)
+ return -EINVAL;
+
+ clk_prepare_enable(dphy->psm_clk);
+ clk_prepare_enable(dphy->pll_ref_clk);
/*
* Configure the internal PSM clk divider so that the DPHY has a
* 1MHz clk (or something close).
*/
ret = cdns_dphy_setup_psm(dphy);
- if (ret)
- return ret;
+ if (ret) {
+ dev_err(&dphy->phy->dev, "Failed to setup PSM with error %d\n", ret);
+ goto err_power_on;
+ }
/*
* Configure attach clk lanes to data lanes: the DPHY has 2 clk lanes
@@ -357,40 +397,60 @@ static int cdns_dphy_configure(struct phy *phy, union phy_configure_opts *opts)
* Configure the DPHY PLL that will be used to generate the TX byte
* clk.
*/
- cdns_dphy_set_pll_cfg(dphy, &cfg);
+ cdns_dphy_set_pll_cfg(dphy, &dphy->cfg);
- band_ctrl = cdns_dphy_tx_get_band_ctrl(opts->mipi_dphy.hs_clk_rate);
- if (band_ctrl < 0)
- return band_ctrl;
+ ret = cdns_dphy_tx_get_band_ctrl(dphy->cfg.hs_clk_rate);
+ if (ret < 0) {
+ dev_err(&dphy->phy->dev, "Failed to get band control value with error %d\n", ret);
+ goto err_power_on;
+ }
- reg = FIELD_PREP(DPHY_BAND_CFG_LEFT_BAND, band_ctrl) |
- FIELD_PREP(DPHY_BAND_CFG_RIGHT_BAND, band_ctrl);
+ reg = FIELD_PREP(DPHY_BAND_CFG_LEFT_BAND, ret) |
+ FIELD_PREP(DPHY_BAND_CFG_RIGHT_BAND, ret);
writel(reg, dphy->regs + DPHY_BAND_CFG);
- return 0;
-}
-
-static int cdns_dphy_power_on(struct phy *phy)
-{
- struct cdns_dphy *dphy = phy_get_drvdata(phy);
-
- clk_prepare_enable(dphy->psm_clk);
- clk_prepare_enable(dphy->pll_ref_clk);
-
/* Start TX state machine. */
writel(DPHY_CMN_SSM_EN | DPHY_CMN_TX_MODE_EN,
dphy->regs + DPHY_CMN_SSM);
+ ret = cdns_dphy_wait_for_pll_lock(dphy);
+ if (ret) {
+ dev_err(&dphy->phy->dev, "Failed to lock PLL with error %d\n", ret);
+ goto err_power_on;
+ }
+
+ ret = cdns_dphy_wait_for_cmn_ready(dphy);
+ if (ret) {
+ dev_err(&dphy->phy->dev, "O_CMN_READY signal failed to assert with error %d\n",
+ ret);
+ goto err_power_on;
+ }
+
+ dphy->is_powered = true;
+
return 0;
+
+err_power_on:
+ clk_disable_unprepare(dphy->pll_ref_clk);
+ clk_disable_unprepare(dphy->psm_clk);
+
+ return ret;
}
static int cdns_dphy_power_off(struct phy *phy)
{
struct cdns_dphy *dphy = phy_get_drvdata(phy);
+ u32 reg;
clk_disable_unprepare(dphy->pll_ref_clk);
clk_disable_unprepare(dphy->psm_clk);
+ /* Stop TX state machine. */
+ reg = readl(dphy->regs + DPHY_CMN_SSM);
+ writel(reg & ~DPHY_CMN_SSM_EN, dphy->regs + DPHY_CMN_SSM);
+
+ dphy->is_powered = false;
+
return 0;
}
The patch below does not apply to the 6.12-stable tree.
If someone wants it applied there, or to any other stable or longterm
tree, then please email the backport, including the original git commit
id to <stable(a)vger.kernel.org>.
To reproduce the conflict and resubmit, you may use the following commands:
git fetch https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git/ linux-6.12.y
git checkout FETCH_HEAD
git cherry-pick -x 284fb19a3ffb1083c3ad9c00d29749d09dddb99c
# <resolve conflicts, build, test, etc.>
git commit -s
git send-email --to '<stable(a)vger.kernel.org>' --in-reply-to '2025101613-trickery-snowless-db46@gregkh' --subject-prefix 'PATCH 6.12.y' HEAD^..
Possible dependencies:
thanks,
greg k-h
------------------ original commit in Linus's tree ------------------
From 284fb19a3ffb1083c3ad9c00d29749d09dddb99c Mon Sep 17 00:00:00 2001
From: Devarsh Thakkar <devarsht(a)ti.com>
Date: Fri, 4 Jul 2025 18:29:14 +0530
Subject: [PATCH] phy: cadence: cdns-dphy: Fix PLL lock and O_CMN_READY polling
PLL lockup and O_CMN_READY assertion can only happen after common state
machine gets enabled by programming DPHY_CMN_SSM register, but driver was
polling them before the common state machine was enabled which is
incorrect. This is as per the DPHY initialization sequence as mentioned in
J721E TRM [1] at section "12.7.2.4.1.2.1 Start-up Sequence Timing Diagram".
It shows O_CMN_READY polling at the end after common configuration pin
setup where the common configuration pin setup step enables state machine
as referenced in "Table 12-1533. Common Configuration-Related Setup
mentions state machine"
To fix this :
- Add new function callbacks for polling on PLL lock and O_CMN_READY
assertion.
- As state machine and clocks get enabled in power_on callback only, move
the clock related programming part from configure callback to power_on
callback and poll for the PLL lockup and O_CMN_READY assertion after state
machine gets enabled.
- The configure callback only saves the PLL configuration received from the
client driver which will be applied later on in power_on callback.
- Add checks to ensure configure is called before power_on and state
machine is in disabled state before power_on callback is called.
- Disable state machine in power_off so that client driver can re-configure
the PLL by following up a power_off, configure, power_on sequence.
[1]: https://www.ti.com/lit/zip/spruil1
Cc: stable(a)vger.kernel.org
Fixes: 7a343c8bf4b5 ("phy: Add Cadence D-PHY support")
Signed-off-by: Devarsh Thakkar <devarsht(a)ti.com>
Tested-by: Harikrishna Shenoy <h-shenoy(a)ti.com>
Reviewed-by: Tomi Valkeinen <tomi.valkeinen(a)ideasonboard.com>
Link: https://lore.kernel.org/r/20250704125915.1224738-2-devarsht@ti.com
Signed-off-by: Vinod Koul <vkoul(a)kernel.org>
diff --git a/drivers/phy/cadence/cdns-dphy.c b/drivers/phy/cadence/cdns-dphy.c
index 33a42e72362e..da8de0a9d086 100644
--- a/drivers/phy/cadence/cdns-dphy.c
+++ b/drivers/phy/cadence/cdns-dphy.c
@@ -92,6 +92,8 @@ struct cdns_dphy_ops {
void (*set_pll_cfg)(struct cdns_dphy *dphy,
const struct cdns_dphy_cfg *cfg);
unsigned long (*get_wakeup_time_ns)(struct cdns_dphy *dphy);
+ int (*wait_for_pll_lock)(struct cdns_dphy *dphy);
+ int (*wait_for_cmn_ready)(struct cdns_dphy *dphy);
};
struct cdns_dphy {
@@ -101,6 +103,8 @@ struct cdns_dphy {
struct clk *pll_ref_clk;
const struct cdns_dphy_ops *ops;
struct phy *phy;
+ bool is_configured;
+ bool is_powered;
};
/* Order of bands is important since the index is the band number. */
@@ -186,6 +190,16 @@ static unsigned long cdns_dphy_get_wakeup_time_ns(struct cdns_dphy *dphy)
return dphy->ops->get_wakeup_time_ns(dphy);
}
+static int cdns_dphy_wait_for_pll_lock(struct cdns_dphy *dphy)
+{
+ return dphy->ops->wait_for_pll_lock ? dphy->ops->wait_for_pll_lock(dphy) : 0;
+}
+
+static int cdns_dphy_wait_for_cmn_ready(struct cdns_dphy *dphy)
+{
+ return dphy->ops->wait_for_cmn_ready ? dphy->ops->wait_for_cmn_ready(dphy) : 0;
+}
+
static unsigned long cdns_dphy_ref_get_wakeup_time_ns(struct cdns_dphy *dphy)
{
/* Default wakeup time is 800 ns (in a simulated environment). */
@@ -227,7 +241,6 @@ static unsigned long cdns_dphy_j721e_get_wakeup_time_ns(struct cdns_dphy *dphy)
static void cdns_dphy_j721e_set_pll_cfg(struct cdns_dphy *dphy,
const struct cdns_dphy_cfg *cfg)
{
- u32 status;
/*
* set the PWM and PLL Byteclk divider settings to recommended values
@@ -244,13 +257,6 @@ static void cdns_dphy_j721e_set_pll_cfg(struct cdns_dphy *dphy,
writel(DPHY_TX_J721E_WIZ_LANE_RSTB,
dphy->regs + DPHY_TX_J721E_WIZ_RST_CTRL);
-
- readl_poll_timeout(dphy->regs + DPHY_TX_J721E_WIZ_PLL_CTRL, status,
- (status & DPHY_TX_WIZ_PLL_LOCK), 0, POLL_TIMEOUT_US);
-
- readl_poll_timeout(dphy->regs + DPHY_TX_J721E_WIZ_STATUS, status,
- (status & DPHY_TX_WIZ_O_CMN_READY), 0,
- POLL_TIMEOUT_US);
}
static void cdns_dphy_j721e_set_psm_div(struct cdns_dphy *dphy, u8 div)
@@ -258,6 +264,23 @@ static void cdns_dphy_j721e_set_psm_div(struct cdns_dphy *dphy, u8 div)
writel(div, dphy->regs + DPHY_TX_J721E_WIZ_PSM_FREQ);
}
+static int cdns_dphy_j721e_wait_for_pll_lock(struct cdns_dphy *dphy)
+{
+ u32 status;
+
+ return readl_poll_timeout(dphy->regs + DPHY_TX_J721E_WIZ_PLL_CTRL, status,
+ status & DPHY_TX_WIZ_PLL_LOCK, 0, POLL_TIMEOUT_US);
+}
+
+static int cdns_dphy_j721e_wait_for_cmn_ready(struct cdns_dphy *dphy)
+{
+ u32 status;
+
+ return readl_poll_timeout(dphy->regs + DPHY_TX_J721E_WIZ_STATUS, status,
+ status & DPHY_TX_WIZ_O_CMN_READY, 0,
+ POLL_TIMEOUT_US);
+}
+
/*
* This is the reference implementation of DPHY hooks. Specific integration of
* this IP may have to re-implement some of them depending on how they decided
@@ -273,6 +296,8 @@ static const struct cdns_dphy_ops j721e_dphy_ops = {
.get_wakeup_time_ns = cdns_dphy_j721e_get_wakeup_time_ns,
.set_pll_cfg = cdns_dphy_j721e_set_pll_cfg,
.set_psm_div = cdns_dphy_j721e_set_psm_div,
+ .wait_for_pll_lock = cdns_dphy_j721e_wait_for_pll_lock,
+ .wait_for_cmn_ready = cdns_dphy_j721e_wait_for_cmn_ready,
};
static int cdns_dphy_config_from_opts(struct phy *phy,
@@ -328,21 +353,36 @@ static int cdns_dphy_validate(struct phy *phy, enum phy_mode mode, int submode,
static int cdns_dphy_configure(struct phy *phy, union phy_configure_opts *opts)
{
struct cdns_dphy *dphy = phy_get_drvdata(phy);
- struct cdns_dphy_cfg cfg = { 0 };
- int ret, band_ctrl;
- unsigned int reg;
+ int ret;
- ret = cdns_dphy_config_from_opts(phy, &opts->mipi_dphy, &cfg);
- if (ret)
- return ret;
+ ret = cdns_dphy_config_from_opts(phy, &opts->mipi_dphy, &dphy->cfg);
+ if (!ret)
+ dphy->is_configured = true;
+
+ return ret;
+}
+
+static int cdns_dphy_power_on(struct phy *phy)
+{
+ struct cdns_dphy *dphy = phy_get_drvdata(phy);
+ int ret;
+ u32 reg;
+
+ if (!dphy->is_configured || dphy->is_powered)
+ return -EINVAL;
+
+ clk_prepare_enable(dphy->psm_clk);
+ clk_prepare_enable(dphy->pll_ref_clk);
/*
* Configure the internal PSM clk divider so that the DPHY has a
* 1MHz clk (or something close).
*/
ret = cdns_dphy_setup_psm(dphy);
- if (ret)
- return ret;
+ if (ret) {
+ dev_err(&dphy->phy->dev, "Failed to setup PSM with error %d\n", ret);
+ goto err_power_on;
+ }
/*
* Configure attach clk lanes to data lanes: the DPHY has 2 clk lanes
@@ -357,40 +397,60 @@ static int cdns_dphy_configure(struct phy *phy, union phy_configure_opts *opts)
* Configure the DPHY PLL that will be used to generate the TX byte
* clk.
*/
- cdns_dphy_set_pll_cfg(dphy, &cfg);
+ cdns_dphy_set_pll_cfg(dphy, &dphy->cfg);
- band_ctrl = cdns_dphy_tx_get_band_ctrl(opts->mipi_dphy.hs_clk_rate);
- if (band_ctrl < 0)
- return band_ctrl;
+ ret = cdns_dphy_tx_get_band_ctrl(dphy->cfg.hs_clk_rate);
+ if (ret < 0) {
+ dev_err(&dphy->phy->dev, "Failed to get band control value with error %d\n", ret);
+ goto err_power_on;
+ }
- reg = FIELD_PREP(DPHY_BAND_CFG_LEFT_BAND, band_ctrl) |
- FIELD_PREP(DPHY_BAND_CFG_RIGHT_BAND, band_ctrl);
+ reg = FIELD_PREP(DPHY_BAND_CFG_LEFT_BAND, ret) |
+ FIELD_PREP(DPHY_BAND_CFG_RIGHT_BAND, ret);
writel(reg, dphy->regs + DPHY_BAND_CFG);
- return 0;
-}
-
-static int cdns_dphy_power_on(struct phy *phy)
-{
- struct cdns_dphy *dphy = phy_get_drvdata(phy);
-
- clk_prepare_enable(dphy->psm_clk);
- clk_prepare_enable(dphy->pll_ref_clk);
-
/* Start TX state machine. */
writel(DPHY_CMN_SSM_EN | DPHY_CMN_TX_MODE_EN,
dphy->regs + DPHY_CMN_SSM);
+ ret = cdns_dphy_wait_for_pll_lock(dphy);
+ if (ret) {
+ dev_err(&dphy->phy->dev, "Failed to lock PLL with error %d\n", ret);
+ goto err_power_on;
+ }
+
+ ret = cdns_dphy_wait_for_cmn_ready(dphy);
+ if (ret) {
+ dev_err(&dphy->phy->dev, "O_CMN_READY signal failed to assert with error %d\n",
+ ret);
+ goto err_power_on;
+ }
+
+ dphy->is_powered = true;
+
return 0;
+
+err_power_on:
+ clk_disable_unprepare(dphy->pll_ref_clk);
+ clk_disable_unprepare(dphy->psm_clk);
+
+ return ret;
}
static int cdns_dphy_power_off(struct phy *phy)
{
struct cdns_dphy *dphy = phy_get_drvdata(phy);
+ u32 reg;
clk_disable_unprepare(dphy->pll_ref_clk);
clk_disable_unprepare(dphy->psm_clk);
+ /* Stop TX state machine. */
+ reg = readl(dphy->regs + DPHY_CMN_SSM);
+ writel(reg & ~DPHY_CMN_SSM_EN, dphy->regs + DPHY_CMN_SSM);
+
+ dphy->is_powered = false;
+
return 0;
}
The patch below does not apply to the 6.17-stable tree.
If someone wants it applied there, or to any other stable or longterm
tree, then please email the backport, including the original git commit
id to <stable(a)vger.kernel.org>.
To reproduce the conflict and resubmit, you may use the following commands:
git fetch https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git/ linux-6.17.y
git checkout FETCH_HEAD
git cherry-pick -x 284fb19a3ffb1083c3ad9c00d29749d09dddb99c
# <resolve conflicts, build, test, etc.>
git commit -s
git send-email --to '<stable(a)vger.kernel.org>' --in-reply-to '2025101612-arguable-crushed-0b89@gregkh' --subject-prefix 'PATCH 6.17.y' HEAD^..
Possible dependencies:
thanks,
greg k-h
------------------ original commit in Linus's tree ------------------
From 284fb19a3ffb1083c3ad9c00d29749d09dddb99c Mon Sep 17 00:00:00 2001
From: Devarsh Thakkar <devarsht(a)ti.com>
Date: Fri, 4 Jul 2025 18:29:14 +0530
Subject: [PATCH] phy: cadence: cdns-dphy: Fix PLL lock and O_CMN_READY polling
PLL lockup and O_CMN_READY assertion can only happen after common state
machine gets enabled by programming DPHY_CMN_SSM register, but driver was
polling them before the common state machine was enabled which is
incorrect. This is as per the DPHY initialization sequence as mentioned in
J721E TRM [1] at section "12.7.2.4.1.2.1 Start-up Sequence Timing Diagram".
It shows O_CMN_READY polling at the end after common configuration pin
setup where the common configuration pin setup step enables state machine
as referenced in "Table 12-1533. Common Configuration-Related Setup
mentions state machine"
To fix this :
- Add new function callbacks for polling on PLL lock and O_CMN_READY
assertion.
- As state machine and clocks get enabled in power_on callback only, move
the clock related programming part from configure callback to power_on
callback and poll for the PLL lockup and O_CMN_READY assertion after state
machine gets enabled.
- The configure callback only saves the PLL configuration received from the
client driver which will be applied later on in power_on callback.
- Add checks to ensure configure is called before power_on and state
machine is in disabled state before power_on callback is called.
- Disable state machine in power_off so that client driver can re-configure
the PLL by following up a power_off, configure, power_on sequence.
[1]: https://www.ti.com/lit/zip/spruil1
Cc: stable(a)vger.kernel.org
Fixes: 7a343c8bf4b5 ("phy: Add Cadence D-PHY support")
Signed-off-by: Devarsh Thakkar <devarsht(a)ti.com>
Tested-by: Harikrishna Shenoy <h-shenoy(a)ti.com>
Reviewed-by: Tomi Valkeinen <tomi.valkeinen(a)ideasonboard.com>
Link: https://lore.kernel.org/r/20250704125915.1224738-2-devarsht@ti.com
Signed-off-by: Vinod Koul <vkoul(a)kernel.org>
diff --git a/drivers/phy/cadence/cdns-dphy.c b/drivers/phy/cadence/cdns-dphy.c
index 33a42e72362e..da8de0a9d086 100644
--- a/drivers/phy/cadence/cdns-dphy.c
+++ b/drivers/phy/cadence/cdns-dphy.c
@@ -92,6 +92,8 @@ struct cdns_dphy_ops {
void (*set_pll_cfg)(struct cdns_dphy *dphy,
const struct cdns_dphy_cfg *cfg);
unsigned long (*get_wakeup_time_ns)(struct cdns_dphy *dphy);
+ int (*wait_for_pll_lock)(struct cdns_dphy *dphy);
+ int (*wait_for_cmn_ready)(struct cdns_dphy *dphy);
};
struct cdns_dphy {
@@ -101,6 +103,8 @@ struct cdns_dphy {
struct clk *pll_ref_clk;
const struct cdns_dphy_ops *ops;
struct phy *phy;
+ bool is_configured;
+ bool is_powered;
};
/* Order of bands is important since the index is the band number. */
@@ -186,6 +190,16 @@ static unsigned long cdns_dphy_get_wakeup_time_ns(struct cdns_dphy *dphy)
return dphy->ops->get_wakeup_time_ns(dphy);
}
+static int cdns_dphy_wait_for_pll_lock(struct cdns_dphy *dphy)
+{
+ return dphy->ops->wait_for_pll_lock ? dphy->ops->wait_for_pll_lock(dphy) : 0;
+}
+
+static int cdns_dphy_wait_for_cmn_ready(struct cdns_dphy *dphy)
+{
+ return dphy->ops->wait_for_cmn_ready ? dphy->ops->wait_for_cmn_ready(dphy) : 0;
+}
+
static unsigned long cdns_dphy_ref_get_wakeup_time_ns(struct cdns_dphy *dphy)
{
/* Default wakeup time is 800 ns (in a simulated environment). */
@@ -227,7 +241,6 @@ static unsigned long cdns_dphy_j721e_get_wakeup_time_ns(struct cdns_dphy *dphy)
static void cdns_dphy_j721e_set_pll_cfg(struct cdns_dphy *dphy,
const struct cdns_dphy_cfg *cfg)
{
- u32 status;
/*
* set the PWM and PLL Byteclk divider settings to recommended values
@@ -244,13 +257,6 @@ static void cdns_dphy_j721e_set_pll_cfg(struct cdns_dphy *dphy,
writel(DPHY_TX_J721E_WIZ_LANE_RSTB,
dphy->regs + DPHY_TX_J721E_WIZ_RST_CTRL);
-
- readl_poll_timeout(dphy->regs + DPHY_TX_J721E_WIZ_PLL_CTRL, status,
- (status & DPHY_TX_WIZ_PLL_LOCK), 0, POLL_TIMEOUT_US);
-
- readl_poll_timeout(dphy->regs + DPHY_TX_J721E_WIZ_STATUS, status,
- (status & DPHY_TX_WIZ_O_CMN_READY), 0,
- POLL_TIMEOUT_US);
}
static void cdns_dphy_j721e_set_psm_div(struct cdns_dphy *dphy, u8 div)
@@ -258,6 +264,23 @@ static void cdns_dphy_j721e_set_psm_div(struct cdns_dphy *dphy, u8 div)
writel(div, dphy->regs + DPHY_TX_J721E_WIZ_PSM_FREQ);
}
+static int cdns_dphy_j721e_wait_for_pll_lock(struct cdns_dphy *dphy)
+{
+ u32 status;
+
+ return readl_poll_timeout(dphy->regs + DPHY_TX_J721E_WIZ_PLL_CTRL, status,
+ status & DPHY_TX_WIZ_PLL_LOCK, 0, POLL_TIMEOUT_US);
+}
+
+static int cdns_dphy_j721e_wait_for_cmn_ready(struct cdns_dphy *dphy)
+{
+ u32 status;
+
+ return readl_poll_timeout(dphy->regs + DPHY_TX_J721E_WIZ_STATUS, status,
+ status & DPHY_TX_WIZ_O_CMN_READY, 0,
+ POLL_TIMEOUT_US);
+}
+
/*
* This is the reference implementation of DPHY hooks. Specific integration of
* this IP may have to re-implement some of them depending on how they decided
@@ -273,6 +296,8 @@ static const struct cdns_dphy_ops j721e_dphy_ops = {
.get_wakeup_time_ns = cdns_dphy_j721e_get_wakeup_time_ns,
.set_pll_cfg = cdns_dphy_j721e_set_pll_cfg,
.set_psm_div = cdns_dphy_j721e_set_psm_div,
+ .wait_for_pll_lock = cdns_dphy_j721e_wait_for_pll_lock,
+ .wait_for_cmn_ready = cdns_dphy_j721e_wait_for_cmn_ready,
};
static int cdns_dphy_config_from_opts(struct phy *phy,
@@ -328,21 +353,36 @@ static int cdns_dphy_validate(struct phy *phy, enum phy_mode mode, int submode,
static int cdns_dphy_configure(struct phy *phy, union phy_configure_opts *opts)
{
struct cdns_dphy *dphy = phy_get_drvdata(phy);
- struct cdns_dphy_cfg cfg = { 0 };
- int ret, band_ctrl;
- unsigned int reg;
+ int ret;
- ret = cdns_dphy_config_from_opts(phy, &opts->mipi_dphy, &cfg);
- if (ret)
- return ret;
+ ret = cdns_dphy_config_from_opts(phy, &opts->mipi_dphy, &dphy->cfg);
+ if (!ret)
+ dphy->is_configured = true;
+
+ return ret;
+}
+
+static int cdns_dphy_power_on(struct phy *phy)
+{
+ struct cdns_dphy *dphy = phy_get_drvdata(phy);
+ int ret;
+ u32 reg;
+
+ if (!dphy->is_configured || dphy->is_powered)
+ return -EINVAL;
+
+ clk_prepare_enable(dphy->psm_clk);
+ clk_prepare_enable(dphy->pll_ref_clk);
/*
* Configure the internal PSM clk divider so that the DPHY has a
* 1MHz clk (or something close).
*/
ret = cdns_dphy_setup_psm(dphy);
- if (ret)
- return ret;
+ if (ret) {
+ dev_err(&dphy->phy->dev, "Failed to setup PSM with error %d\n", ret);
+ goto err_power_on;
+ }
/*
* Configure attach clk lanes to data lanes: the DPHY has 2 clk lanes
@@ -357,40 +397,60 @@ static int cdns_dphy_configure(struct phy *phy, union phy_configure_opts *opts)
* Configure the DPHY PLL that will be used to generate the TX byte
* clk.
*/
- cdns_dphy_set_pll_cfg(dphy, &cfg);
+ cdns_dphy_set_pll_cfg(dphy, &dphy->cfg);
- band_ctrl = cdns_dphy_tx_get_band_ctrl(opts->mipi_dphy.hs_clk_rate);
- if (band_ctrl < 0)
- return band_ctrl;
+ ret = cdns_dphy_tx_get_band_ctrl(dphy->cfg.hs_clk_rate);
+ if (ret < 0) {
+ dev_err(&dphy->phy->dev, "Failed to get band control value with error %d\n", ret);
+ goto err_power_on;
+ }
- reg = FIELD_PREP(DPHY_BAND_CFG_LEFT_BAND, band_ctrl) |
- FIELD_PREP(DPHY_BAND_CFG_RIGHT_BAND, band_ctrl);
+ reg = FIELD_PREP(DPHY_BAND_CFG_LEFT_BAND, ret) |
+ FIELD_PREP(DPHY_BAND_CFG_RIGHT_BAND, ret);
writel(reg, dphy->regs + DPHY_BAND_CFG);
- return 0;
-}
-
-static int cdns_dphy_power_on(struct phy *phy)
-{
- struct cdns_dphy *dphy = phy_get_drvdata(phy);
-
- clk_prepare_enable(dphy->psm_clk);
- clk_prepare_enable(dphy->pll_ref_clk);
-
/* Start TX state machine. */
writel(DPHY_CMN_SSM_EN | DPHY_CMN_TX_MODE_EN,
dphy->regs + DPHY_CMN_SSM);
+ ret = cdns_dphy_wait_for_pll_lock(dphy);
+ if (ret) {
+ dev_err(&dphy->phy->dev, "Failed to lock PLL with error %d\n", ret);
+ goto err_power_on;
+ }
+
+ ret = cdns_dphy_wait_for_cmn_ready(dphy);
+ if (ret) {
+ dev_err(&dphy->phy->dev, "O_CMN_READY signal failed to assert with error %d\n",
+ ret);
+ goto err_power_on;
+ }
+
+ dphy->is_powered = true;
+
return 0;
+
+err_power_on:
+ clk_disable_unprepare(dphy->pll_ref_clk);
+ clk_disable_unprepare(dphy->psm_clk);
+
+ return ret;
}
static int cdns_dphy_power_off(struct phy *phy)
{
struct cdns_dphy *dphy = phy_get_drvdata(phy);
+ u32 reg;
clk_disable_unprepare(dphy->pll_ref_clk);
clk_disable_unprepare(dphy->psm_clk);
+ /* Stop TX state machine. */
+ reg = readl(dphy->regs + DPHY_CMN_SSM);
+ writel(reg & ~DPHY_CMN_SSM_EN, dphy->regs + DPHY_CMN_SSM);
+
+ dphy->is_powered = false;
+
return 0;
}
The patch below does not apply to the 5.15-stable tree.
If someone wants it applied there, or to any other stable or longterm
tree, then please email the backport, including the original git commit
id to <stable(a)vger.kernel.org>.
To reproduce the conflict and resubmit, you may use the following commands:
git fetch https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git/ linux-5.15.y
git checkout FETCH_HEAD
git cherry-pick -x e747883c7d7306acb4d683038d881528fbfbe749
# <resolve conflicts, build, test, etc.>
git commit -s
git send-email --to '<stable(a)vger.kernel.org>' --in-reply-to '2025101616-negligee-wrongness-0478@gregkh' --subject-prefix 'PATCH 5.15.y' HEAD^..
Possible dependencies:
thanks,
greg k-h
------------------ original commit in Linus's tree ------------------
From e747883c7d7306acb4d683038d881528fbfbe749 Mon Sep 17 00:00:00 2001
From: Christoph Hellwig <hch(a)lst.de>
Date: Mon, 15 Sep 2025 06:20:30 -0700
Subject: [PATCH] xfs: fix log CRC mismatches between i386 and other
architectures
When mounting file systems with a log that was dirtied on i386 on
other architectures or vice versa, log recovery is unhappy:
[ 11.068052] XFS (vdb): Torn write (CRC failure) detected at log block 0x2. Truncating head block from 0xc.
This is because the CRCs generated by i386 and other architectures
always diff. The reason for that is that sizeof(struct xlog_rec_header)
returns different values for i386 vs the rest (324 vs 328), because the
struct is not sizeof(uint64_t) aligned, and i386 has odd struct size
alignment rules.
This issue goes back to commit 13cdc853c519 ("Add log versioning, and new
super block field for the log stripe") in the xfs-import tree, which
adds log v2 support and the h_size field that causes the unaligned size.
At that time it only mattered for the crude debug only log header
checksum, but with commit 0e446be44806 ("xfs: add CRC checks to the log")
it became a real issue for v5 file system, because now there is a proper
CRC, and regular builds actually expect it match.
Fix this by allowing checksums with and without the padding.
Fixes: 0e446be44806 ("xfs: add CRC checks to the log")
Cc: <stable(a)vger.kernel.org> # v3.8
Signed-off-by: Christoph Hellwig <hch(a)lst.de>
Signed-off-by: Carlos Maiolino <cem(a)kernel.org>
diff --git a/fs/xfs/libxfs/xfs_log_format.h b/fs/xfs/libxfs/xfs_log_format.h
index a42a83211724..fd00b77af32b 100644
--- a/fs/xfs/libxfs/xfs_log_format.h
+++ b/fs/xfs/libxfs/xfs_log_format.h
@@ -173,12 +173,40 @@ typedef struct xlog_rec_header {
__be32 h_prev_block; /* block number to previous LR : 4 */
__be32 h_num_logops; /* number of log operations in this LR : 4 */
__be32 h_cycle_data[XLOG_HEADER_CYCLE_SIZE / BBSIZE];
- /* new fields */
+
+ /* fields added by the Linux port: */
__be32 h_fmt; /* format of log record : 4 */
uuid_t h_fs_uuid; /* uuid of FS : 16 */
+
+ /* fields added for log v2: */
__be32 h_size; /* iclog size : 4 */
+
+ /*
+ * When h_size added for log v2 support, it caused structure to have
+ * a different size on i386 vs all other architectures because the
+ * sum of the size ofthe member is not aligned by that of the largest
+ * __be64-sized member, and i386 has really odd struct alignment rules.
+ *
+ * Due to the way the log headers are placed out on-disk that alone is
+ * not a problem becaue the xlog_rec_header always sits alone in a
+ * BBSIZEs area, and the rest of that area is padded with zeroes.
+ * But xlog_cksum used to calculate the checksum based on the structure
+ * size, and thus gives different checksums for i386 vs the rest.
+ * We now do two checksum validation passes for both sizes to allow
+ * moving v5 file systems with unclean logs between i386 and other
+ * (little-endian) architectures.
+ */
+ __u32 h_pad0;
} xlog_rec_header_t;
+#ifdef __i386__
+#define XLOG_REC_SIZE offsetofend(struct xlog_rec_header, h_size)
+#define XLOG_REC_SIZE_OTHER sizeof(struct xlog_rec_header)
+#else
+#define XLOG_REC_SIZE sizeof(struct xlog_rec_header)
+#define XLOG_REC_SIZE_OTHER offsetofend(struct xlog_rec_header, h_size)
+#endif /* __i386__ */
+
typedef struct xlog_rec_ext_header {
__be32 xh_cycle; /* write cycle of log : 4 */
__be32 xh_cycle_data[XLOG_HEADER_CYCLE_SIZE / BBSIZE]; /* : 256 */
diff --git a/fs/xfs/libxfs/xfs_ondisk.h b/fs/xfs/libxfs/xfs_ondisk.h
index 5ed44fdf7491..7bfa3242e2c5 100644
--- a/fs/xfs/libxfs/xfs_ondisk.h
+++ b/fs/xfs/libxfs/xfs_ondisk.h
@@ -174,6 +174,8 @@ xfs_check_ondisk_structs(void)
XFS_CHECK_STRUCT_SIZE(struct xfs_rud_log_format, 16);
XFS_CHECK_STRUCT_SIZE(struct xfs_map_extent, 32);
XFS_CHECK_STRUCT_SIZE(struct xfs_phys_extent, 16);
+ XFS_CHECK_STRUCT_SIZE(struct xlog_rec_header, 328);
+ XFS_CHECK_STRUCT_SIZE(struct xlog_rec_ext_header, 260);
XFS_CHECK_OFFSET(struct xfs_bui_log_format, bui_extents, 16);
XFS_CHECK_OFFSET(struct xfs_cui_log_format, cui_extents, 16);
diff --git a/fs/xfs/xfs_log.c b/fs/xfs/xfs_log.c
index 7c590ecdf865..2978de9da38e 100644
--- a/fs/xfs/xfs_log.c
+++ b/fs/xfs/xfs_log.c
@@ -1568,13 +1568,13 @@ xlog_cksum(
struct xlog *log,
struct xlog_rec_header *rhead,
char *dp,
- int size)
+ unsigned int hdrsize,
+ unsigned int size)
{
uint32_t crc;
/* first generate the crc for the record header ... */
- crc = xfs_start_cksum_update((char *)rhead,
- sizeof(struct xlog_rec_header),
+ crc = xfs_start_cksum_update((char *)rhead, hdrsize,
offsetof(struct xlog_rec_header, h_crc));
/* ... then for additional cycle data for v2 logs ... */
@@ -1818,7 +1818,7 @@ xlog_sync(
/* calculcate the checksum */
iclog->ic_header.h_crc = xlog_cksum(log, &iclog->ic_header,
- iclog->ic_datap, size);
+ iclog->ic_datap, XLOG_REC_SIZE, size);
/*
* Intentionally corrupt the log record CRC based on the error injection
* frequency, if defined. This facilitates testing log recovery in the
diff --git a/fs/xfs/xfs_log_priv.h b/fs/xfs/xfs_log_priv.h
index a9a7a271c15b..0cfc654d8e87 100644
--- a/fs/xfs/xfs_log_priv.h
+++ b/fs/xfs/xfs_log_priv.h
@@ -499,8 +499,8 @@ xlog_recover_finish(
extern void
xlog_recover_cancel(struct xlog *);
-extern __le32 xlog_cksum(struct xlog *log, struct xlog_rec_header *rhead,
- char *dp, int size);
+__le32 xlog_cksum(struct xlog *log, struct xlog_rec_header *rhead,
+ char *dp, unsigned int hdrsize, unsigned int size);
extern struct kmem_cache *xfs_log_ticket_cache;
struct xlog_ticket *xlog_ticket_alloc(struct xlog *log, int unit_bytes,
diff --git a/fs/xfs/xfs_log_recover.c b/fs/xfs/xfs_log_recover.c
index 0a4db8efd903..549d60959aee 100644
--- a/fs/xfs/xfs_log_recover.c
+++ b/fs/xfs/xfs_log_recover.c
@@ -2894,9 +2894,24 @@ xlog_recover_process(
int pass,
struct list_head *buffer_list)
{
- __le32 expected_crc = rhead->h_crc, crc;
+ __le32 expected_crc = rhead->h_crc, crc, other_crc;
- crc = xlog_cksum(log, rhead, dp, be32_to_cpu(rhead->h_len));
+ crc = xlog_cksum(log, rhead, dp, XLOG_REC_SIZE,
+ be32_to_cpu(rhead->h_len));
+
+ /*
+ * Look at the end of the struct xlog_rec_header definition in
+ * xfs_log_format.h for the glory details.
+ */
+ if (expected_crc && crc != expected_crc) {
+ other_crc = xlog_cksum(log, rhead, dp, XLOG_REC_SIZE_OTHER,
+ be32_to_cpu(rhead->h_len));
+ if (other_crc == expected_crc) {
+ xfs_notice_once(log->l_mp,
+ "Fixing up incorrect CRC due to padding.");
+ crc = other_crc;
+ }
+ }
/*
* Nothing else to do if this is a CRC verification pass. Just return
The patch below does not apply to the 6.1-stable tree.
If someone wants it applied there, or to any other stable or longterm
tree, then please email the backport, including the original git commit
id to <stable(a)vger.kernel.org>.
To reproduce the conflict and resubmit, you may use the following commands:
git fetch https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git/ linux-6.1.y
git checkout FETCH_HEAD
git cherry-pick -x e747883c7d7306acb4d683038d881528fbfbe749
# <resolve conflicts, build, test, etc.>
git commit -s
git send-email --to '<stable(a)vger.kernel.org>' --in-reply-to '2025101615-delirious-unicycle-3115@gregkh' --subject-prefix 'PATCH 6.1.y' HEAD^..
Possible dependencies:
thanks,
greg k-h
------------------ original commit in Linus's tree ------------------
From e747883c7d7306acb4d683038d881528fbfbe749 Mon Sep 17 00:00:00 2001
From: Christoph Hellwig <hch(a)lst.de>
Date: Mon, 15 Sep 2025 06:20:30 -0700
Subject: [PATCH] xfs: fix log CRC mismatches between i386 and other
architectures
When mounting file systems with a log that was dirtied on i386 on
other architectures or vice versa, log recovery is unhappy:
[ 11.068052] XFS (vdb): Torn write (CRC failure) detected at log block 0x2. Truncating head block from 0xc.
This is because the CRCs generated by i386 and other architectures
always diff. The reason for that is that sizeof(struct xlog_rec_header)
returns different values for i386 vs the rest (324 vs 328), because the
struct is not sizeof(uint64_t) aligned, and i386 has odd struct size
alignment rules.
This issue goes back to commit 13cdc853c519 ("Add log versioning, and new
super block field for the log stripe") in the xfs-import tree, which
adds log v2 support and the h_size field that causes the unaligned size.
At that time it only mattered for the crude debug only log header
checksum, but with commit 0e446be44806 ("xfs: add CRC checks to the log")
it became a real issue for v5 file system, because now there is a proper
CRC, and regular builds actually expect it match.
Fix this by allowing checksums with and without the padding.
Fixes: 0e446be44806 ("xfs: add CRC checks to the log")
Cc: <stable(a)vger.kernel.org> # v3.8
Signed-off-by: Christoph Hellwig <hch(a)lst.de>
Signed-off-by: Carlos Maiolino <cem(a)kernel.org>
diff --git a/fs/xfs/libxfs/xfs_log_format.h b/fs/xfs/libxfs/xfs_log_format.h
index a42a83211724..fd00b77af32b 100644
--- a/fs/xfs/libxfs/xfs_log_format.h
+++ b/fs/xfs/libxfs/xfs_log_format.h
@@ -173,12 +173,40 @@ typedef struct xlog_rec_header {
__be32 h_prev_block; /* block number to previous LR : 4 */
__be32 h_num_logops; /* number of log operations in this LR : 4 */
__be32 h_cycle_data[XLOG_HEADER_CYCLE_SIZE / BBSIZE];
- /* new fields */
+
+ /* fields added by the Linux port: */
__be32 h_fmt; /* format of log record : 4 */
uuid_t h_fs_uuid; /* uuid of FS : 16 */
+
+ /* fields added for log v2: */
__be32 h_size; /* iclog size : 4 */
+
+ /*
+ * When h_size added for log v2 support, it caused structure to have
+ * a different size on i386 vs all other architectures because the
+ * sum of the size ofthe member is not aligned by that of the largest
+ * __be64-sized member, and i386 has really odd struct alignment rules.
+ *
+ * Due to the way the log headers are placed out on-disk that alone is
+ * not a problem becaue the xlog_rec_header always sits alone in a
+ * BBSIZEs area, and the rest of that area is padded with zeroes.
+ * But xlog_cksum used to calculate the checksum based on the structure
+ * size, and thus gives different checksums for i386 vs the rest.
+ * We now do two checksum validation passes for both sizes to allow
+ * moving v5 file systems with unclean logs between i386 and other
+ * (little-endian) architectures.
+ */
+ __u32 h_pad0;
} xlog_rec_header_t;
+#ifdef __i386__
+#define XLOG_REC_SIZE offsetofend(struct xlog_rec_header, h_size)
+#define XLOG_REC_SIZE_OTHER sizeof(struct xlog_rec_header)
+#else
+#define XLOG_REC_SIZE sizeof(struct xlog_rec_header)
+#define XLOG_REC_SIZE_OTHER offsetofend(struct xlog_rec_header, h_size)
+#endif /* __i386__ */
+
typedef struct xlog_rec_ext_header {
__be32 xh_cycle; /* write cycle of log : 4 */
__be32 xh_cycle_data[XLOG_HEADER_CYCLE_SIZE / BBSIZE]; /* : 256 */
diff --git a/fs/xfs/libxfs/xfs_ondisk.h b/fs/xfs/libxfs/xfs_ondisk.h
index 5ed44fdf7491..7bfa3242e2c5 100644
--- a/fs/xfs/libxfs/xfs_ondisk.h
+++ b/fs/xfs/libxfs/xfs_ondisk.h
@@ -174,6 +174,8 @@ xfs_check_ondisk_structs(void)
XFS_CHECK_STRUCT_SIZE(struct xfs_rud_log_format, 16);
XFS_CHECK_STRUCT_SIZE(struct xfs_map_extent, 32);
XFS_CHECK_STRUCT_SIZE(struct xfs_phys_extent, 16);
+ XFS_CHECK_STRUCT_SIZE(struct xlog_rec_header, 328);
+ XFS_CHECK_STRUCT_SIZE(struct xlog_rec_ext_header, 260);
XFS_CHECK_OFFSET(struct xfs_bui_log_format, bui_extents, 16);
XFS_CHECK_OFFSET(struct xfs_cui_log_format, cui_extents, 16);
diff --git a/fs/xfs/xfs_log.c b/fs/xfs/xfs_log.c
index 7c590ecdf865..2978de9da38e 100644
--- a/fs/xfs/xfs_log.c
+++ b/fs/xfs/xfs_log.c
@@ -1568,13 +1568,13 @@ xlog_cksum(
struct xlog *log,
struct xlog_rec_header *rhead,
char *dp,
- int size)
+ unsigned int hdrsize,
+ unsigned int size)
{
uint32_t crc;
/* first generate the crc for the record header ... */
- crc = xfs_start_cksum_update((char *)rhead,
- sizeof(struct xlog_rec_header),
+ crc = xfs_start_cksum_update((char *)rhead, hdrsize,
offsetof(struct xlog_rec_header, h_crc));
/* ... then for additional cycle data for v2 logs ... */
@@ -1818,7 +1818,7 @@ xlog_sync(
/* calculcate the checksum */
iclog->ic_header.h_crc = xlog_cksum(log, &iclog->ic_header,
- iclog->ic_datap, size);
+ iclog->ic_datap, XLOG_REC_SIZE, size);
/*
* Intentionally corrupt the log record CRC based on the error injection
* frequency, if defined. This facilitates testing log recovery in the
diff --git a/fs/xfs/xfs_log_priv.h b/fs/xfs/xfs_log_priv.h
index a9a7a271c15b..0cfc654d8e87 100644
--- a/fs/xfs/xfs_log_priv.h
+++ b/fs/xfs/xfs_log_priv.h
@@ -499,8 +499,8 @@ xlog_recover_finish(
extern void
xlog_recover_cancel(struct xlog *);
-extern __le32 xlog_cksum(struct xlog *log, struct xlog_rec_header *rhead,
- char *dp, int size);
+__le32 xlog_cksum(struct xlog *log, struct xlog_rec_header *rhead,
+ char *dp, unsigned int hdrsize, unsigned int size);
extern struct kmem_cache *xfs_log_ticket_cache;
struct xlog_ticket *xlog_ticket_alloc(struct xlog *log, int unit_bytes,
diff --git a/fs/xfs/xfs_log_recover.c b/fs/xfs/xfs_log_recover.c
index 0a4db8efd903..549d60959aee 100644
--- a/fs/xfs/xfs_log_recover.c
+++ b/fs/xfs/xfs_log_recover.c
@@ -2894,9 +2894,24 @@ xlog_recover_process(
int pass,
struct list_head *buffer_list)
{
- __le32 expected_crc = rhead->h_crc, crc;
+ __le32 expected_crc = rhead->h_crc, crc, other_crc;
- crc = xlog_cksum(log, rhead, dp, be32_to_cpu(rhead->h_len));
+ crc = xlog_cksum(log, rhead, dp, XLOG_REC_SIZE,
+ be32_to_cpu(rhead->h_len));
+
+ /*
+ * Look at the end of the struct xlog_rec_header definition in
+ * xfs_log_format.h for the glory details.
+ */
+ if (expected_crc && crc != expected_crc) {
+ other_crc = xlog_cksum(log, rhead, dp, XLOG_REC_SIZE_OTHER,
+ be32_to_cpu(rhead->h_len));
+ if (other_crc == expected_crc) {
+ xfs_notice_once(log->l_mp,
+ "Fixing up incorrect CRC due to padding.");
+ crc = other_crc;
+ }
+ }
/*
* Nothing else to do if this is a CRC verification pass. Just return
The patch below does not apply to the 6.6-stable tree.
If someone wants it applied there, or to any other stable or longterm
tree, then please email the backport, including the original git commit
id to <stable(a)vger.kernel.org>.
To reproduce the conflict and resubmit, you may use the following commands:
git fetch https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git/ linux-6.6.y
git checkout FETCH_HEAD
git cherry-pick -x e747883c7d7306acb4d683038d881528fbfbe749
# <resolve conflicts, build, test, etc.>
git commit -s
git send-email --to '<stable(a)vger.kernel.org>' --in-reply-to '2025101615-hunter-bonfire-f320@gregkh' --subject-prefix 'PATCH 6.6.y' HEAD^..
Possible dependencies:
thanks,
greg k-h
------------------ original commit in Linus's tree ------------------
From e747883c7d7306acb4d683038d881528fbfbe749 Mon Sep 17 00:00:00 2001
From: Christoph Hellwig <hch(a)lst.de>
Date: Mon, 15 Sep 2025 06:20:30 -0700
Subject: [PATCH] xfs: fix log CRC mismatches between i386 and other
architectures
When mounting file systems with a log that was dirtied on i386 on
other architectures or vice versa, log recovery is unhappy:
[ 11.068052] XFS (vdb): Torn write (CRC failure) detected at log block 0x2. Truncating head block from 0xc.
This is because the CRCs generated by i386 and other architectures
always diff. The reason for that is that sizeof(struct xlog_rec_header)
returns different values for i386 vs the rest (324 vs 328), because the
struct is not sizeof(uint64_t) aligned, and i386 has odd struct size
alignment rules.
This issue goes back to commit 13cdc853c519 ("Add log versioning, and new
super block field for the log stripe") in the xfs-import tree, which
adds log v2 support and the h_size field that causes the unaligned size.
At that time it only mattered for the crude debug only log header
checksum, but with commit 0e446be44806 ("xfs: add CRC checks to the log")
it became a real issue for v5 file system, because now there is a proper
CRC, and regular builds actually expect it match.
Fix this by allowing checksums with and without the padding.
Fixes: 0e446be44806 ("xfs: add CRC checks to the log")
Cc: <stable(a)vger.kernel.org> # v3.8
Signed-off-by: Christoph Hellwig <hch(a)lst.de>
Signed-off-by: Carlos Maiolino <cem(a)kernel.org>
diff --git a/fs/xfs/libxfs/xfs_log_format.h b/fs/xfs/libxfs/xfs_log_format.h
index a42a83211724..fd00b77af32b 100644
--- a/fs/xfs/libxfs/xfs_log_format.h
+++ b/fs/xfs/libxfs/xfs_log_format.h
@@ -173,12 +173,40 @@ typedef struct xlog_rec_header {
__be32 h_prev_block; /* block number to previous LR : 4 */
__be32 h_num_logops; /* number of log operations in this LR : 4 */
__be32 h_cycle_data[XLOG_HEADER_CYCLE_SIZE / BBSIZE];
- /* new fields */
+
+ /* fields added by the Linux port: */
__be32 h_fmt; /* format of log record : 4 */
uuid_t h_fs_uuid; /* uuid of FS : 16 */
+
+ /* fields added for log v2: */
__be32 h_size; /* iclog size : 4 */
+
+ /*
+ * When h_size added for log v2 support, it caused structure to have
+ * a different size on i386 vs all other architectures because the
+ * sum of the size ofthe member is not aligned by that of the largest
+ * __be64-sized member, and i386 has really odd struct alignment rules.
+ *
+ * Due to the way the log headers are placed out on-disk that alone is
+ * not a problem becaue the xlog_rec_header always sits alone in a
+ * BBSIZEs area, and the rest of that area is padded with zeroes.
+ * But xlog_cksum used to calculate the checksum based on the structure
+ * size, and thus gives different checksums for i386 vs the rest.
+ * We now do two checksum validation passes for both sizes to allow
+ * moving v5 file systems with unclean logs between i386 and other
+ * (little-endian) architectures.
+ */
+ __u32 h_pad0;
} xlog_rec_header_t;
+#ifdef __i386__
+#define XLOG_REC_SIZE offsetofend(struct xlog_rec_header, h_size)
+#define XLOG_REC_SIZE_OTHER sizeof(struct xlog_rec_header)
+#else
+#define XLOG_REC_SIZE sizeof(struct xlog_rec_header)
+#define XLOG_REC_SIZE_OTHER offsetofend(struct xlog_rec_header, h_size)
+#endif /* __i386__ */
+
typedef struct xlog_rec_ext_header {
__be32 xh_cycle; /* write cycle of log : 4 */
__be32 xh_cycle_data[XLOG_HEADER_CYCLE_SIZE / BBSIZE]; /* : 256 */
diff --git a/fs/xfs/libxfs/xfs_ondisk.h b/fs/xfs/libxfs/xfs_ondisk.h
index 5ed44fdf7491..7bfa3242e2c5 100644
--- a/fs/xfs/libxfs/xfs_ondisk.h
+++ b/fs/xfs/libxfs/xfs_ondisk.h
@@ -174,6 +174,8 @@ xfs_check_ondisk_structs(void)
XFS_CHECK_STRUCT_SIZE(struct xfs_rud_log_format, 16);
XFS_CHECK_STRUCT_SIZE(struct xfs_map_extent, 32);
XFS_CHECK_STRUCT_SIZE(struct xfs_phys_extent, 16);
+ XFS_CHECK_STRUCT_SIZE(struct xlog_rec_header, 328);
+ XFS_CHECK_STRUCT_SIZE(struct xlog_rec_ext_header, 260);
XFS_CHECK_OFFSET(struct xfs_bui_log_format, bui_extents, 16);
XFS_CHECK_OFFSET(struct xfs_cui_log_format, cui_extents, 16);
diff --git a/fs/xfs/xfs_log.c b/fs/xfs/xfs_log.c
index 7c590ecdf865..2978de9da38e 100644
--- a/fs/xfs/xfs_log.c
+++ b/fs/xfs/xfs_log.c
@@ -1568,13 +1568,13 @@ xlog_cksum(
struct xlog *log,
struct xlog_rec_header *rhead,
char *dp,
- int size)
+ unsigned int hdrsize,
+ unsigned int size)
{
uint32_t crc;
/* first generate the crc for the record header ... */
- crc = xfs_start_cksum_update((char *)rhead,
- sizeof(struct xlog_rec_header),
+ crc = xfs_start_cksum_update((char *)rhead, hdrsize,
offsetof(struct xlog_rec_header, h_crc));
/* ... then for additional cycle data for v2 logs ... */
@@ -1818,7 +1818,7 @@ xlog_sync(
/* calculcate the checksum */
iclog->ic_header.h_crc = xlog_cksum(log, &iclog->ic_header,
- iclog->ic_datap, size);
+ iclog->ic_datap, XLOG_REC_SIZE, size);
/*
* Intentionally corrupt the log record CRC based on the error injection
* frequency, if defined. This facilitates testing log recovery in the
diff --git a/fs/xfs/xfs_log_priv.h b/fs/xfs/xfs_log_priv.h
index a9a7a271c15b..0cfc654d8e87 100644
--- a/fs/xfs/xfs_log_priv.h
+++ b/fs/xfs/xfs_log_priv.h
@@ -499,8 +499,8 @@ xlog_recover_finish(
extern void
xlog_recover_cancel(struct xlog *);
-extern __le32 xlog_cksum(struct xlog *log, struct xlog_rec_header *rhead,
- char *dp, int size);
+__le32 xlog_cksum(struct xlog *log, struct xlog_rec_header *rhead,
+ char *dp, unsigned int hdrsize, unsigned int size);
extern struct kmem_cache *xfs_log_ticket_cache;
struct xlog_ticket *xlog_ticket_alloc(struct xlog *log, int unit_bytes,
diff --git a/fs/xfs/xfs_log_recover.c b/fs/xfs/xfs_log_recover.c
index 0a4db8efd903..549d60959aee 100644
--- a/fs/xfs/xfs_log_recover.c
+++ b/fs/xfs/xfs_log_recover.c
@@ -2894,9 +2894,24 @@ xlog_recover_process(
int pass,
struct list_head *buffer_list)
{
- __le32 expected_crc = rhead->h_crc, crc;
+ __le32 expected_crc = rhead->h_crc, crc, other_crc;
- crc = xlog_cksum(log, rhead, dp, be32_to_cpu(rhead->h_len));
+ crc = xlog_cksum(log, rhead, dp, XLOG_REC_SIZE,
+ be32_to_cpu(rhead->h_len));
+
+ /*
+ * Look at the end of the struct xlog_rec_header definition in
+ * xfs_log_format.h for the glory details.
+ */
+ if (expected_crc && crc != expected_crc) {
+ other_crc = xlog_cksum(log, rhead, dp, XLOG_REC_SIZE_OTHER,
+ be32_to_cpu(rhead->h_len));
+ if (other_crc == expected_crc) {
+ xfs_notice_once(log->l_mp,
+ "Fixing up incorrect CRC due to padding.");
+ crc = other_crc;
+ }
+ }
/*
* Nothing else to do if this is a CRC verification pass. Just return
The patch below does not apply to the 6.12-stable tree.
If someone wants it applied there, or to any other stable or longterm
tree, then please email the backport, including the original git commit
id to <stable(a)vger.kernel.org>.
To reproduce the conflict and resubmit, you may use the following commands:
git fetch https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git/ linux-6.12.y
git checkout FETCH_HEAD
git cherry-pick -x e747883c7d7306acb4d683038d881528fbfbe749
# <resolve conflicts, build, test, etc.>
git commit -s
git send-email --to '<stable(a)vger.kernel.org>' --in-reply-to '2025101614-down-dicing-0c7e@gregkh' --subject-prefix 'PATCH 6.12.y' HEAD^..
Possible dependencies:
thanks,
greg k-h
------------------ original commit in Linus's tree ------------------
From e747883c7d7306acb4d683038d881528fbfbe749 Mon Sep 17 00:00:00 2001
From: Christoph Hellwig <hch(a)lst.de>
Date: Mon, 15 Sep 2025 06:20:30 -0700
Subject: [PATCH] xfs: fix log CRC mismatches between i386 and other
architectures
When mounting file systems with a log that was dirtied on i386 on
other architectures or vice versa, log recovery is unhappy:
[ 11.068052] XFS (vdb): Torn write (CRC failure) detected at log block 0x2. Truncating head block from 0xc.
This is because the CRCs generated by i386 and other architectures
always diff. The reason for that is that sizeof(struct xlog_rec_header)
returns different values for i386 vs the rest (324 vs 328), because the
struct is not sizeof(uint64_t) aligned, and i386 has odd struct size
alignment rules.
This issue goes back to commit 13cdc853c519 ("Add log versioning, and new
super block field for the log stripe") in the xfs-import tree, which
adds log v2 support and the h_size field that causes the unaligned size.
At that time it only mattered for the crude debug only log header
checksum, but with commit 0e446be44806 ("xfs: add CRC checks to the log")
it became a real issue for v5 file system, because now there is a proper
CRC, and regular builds actually expect it match.
Fix this by allowing checksums with and without the padding.
Fixes: 0e446be44806 ("xfs: add CRC checks to the log")
Cc: <stable(a)vger.kernel.org> # v3.8
Signed-off-by: Christoph Hellwig <hch(a)lst.de>
Signed-off-by: Carlos Maiolino <cem(a)kernel.org>
diff --git a/fs/xfs/libxfs/xfs_log_format.h b/fs/xfs/libxfs/xfs_log_format.h
index a42a83211724..fd00b77af32b 100644
--- a/fs/xfs/libxfs/xfs_log_format.h
+++ b/fs/xfs/libxfs/xfs_log_format.h
@@ -173,12 +173,40 @@ typedef struct xlog_rec_header {
__be32 h_prev_block; /* block number to previous LR : 4 */
__be32 h_num_logops; /* number of log operations in this LR : 4 */
__be32 h_cycle_data[XLOG_HEADER_CYCLE_SIZE / BBSIZE];
- /* new fields */
+
+ /* fields added by the Linux port: */
__be32 h_fmt; /* format of log record : 4 */
uuid_t h_fs_uuid; /* uuid of FS : 16 */
+
+ /* fields added for log v2: */
__be32 h_size; /* iclog size : 4 */
+
+ /*
+ * When h_size added for log v2 support, it caused structure to have
+ * a different size on i386 vs all other architectures because the
+ * sum of the size ofthe member is not aligned by that of the largest
+ * __be64-sized member, and i386 has really odd struct alignment rules.
+ *
+ * Due to the way the log headers are placed out on-disk that alone is
+ * not a problem becaue the xlog_rec_header always sits alone in a
+ * BBSIZEs area, and the rest of that area is padded with zeroes.
+ * But xlog_cksum used to calculate the checksum based on the structure
+ * size, and thus gives different checksums for i386 vs the rest.
+ * We now do two checksum validation passes for both sizes to allow
+ * moving v5 file systems with unclean logs between i386 and other
+ * (little-endian) architectures.
+ */
+ __u32 h_pad0;
} xlog_rec_header_t;
+#ifdef __i386__
+#define XLOG_REC_SIZE offsetofend(struct xlog_rec_header, h_size)
+#define XLOG_REC_SIZE_OTHER sizeof(struct xlog_rec_header)
+#else
+#define XLOG_REC_SIZE sizeof(struct xlog_rec_header)
+#define XLOG_REC_SIZE_OTHER offsetofend(struct xlog_rec_header, h_size)
+#endif /* __i386__ */
+
typedef struct xlog_rec_ext_header {
__be32 xh_cycle; /* write cycle of log : 4 */
__be32 xh_cycle_data[XLOG_HEADER_CYCLE_SIZE / BBSIZE]; /* : 256 */
diff --git a/fs/xfs/libxfs/xfs_ondisk.h b/fs/xfs/libxfs/xfs_ondisk.h
index 5ed44fdf7491..7bfa3242e2c5 100644
--- a/fs/xfs/libxfs/xfs_ondisk.h
+++ b/fs/xfs/libxfs/xfs_ondisk.h
@@ -174,6 +174,8 @@ xfs_check_ondisk_structs(void)
XFS_CHECK_STRUCT_SIZE(struct xfs_rud_log_format, 16);
XFS_CHECK_STRUCT_SIZE(struct xfs_map_extent, 32);
XFS_CHECK_STRUCT_SIZE(struct xfs_phys_extent, 16);
+ XFS_CHECK_STRUCT_SIZE(struct xlog_rec_header, 328);
+ XFS_CHECK_STRUCT_SIZE(struct xlog_rec_ext_header, 260);
XFS_CHECK_OFFSET(struct xfs_bui_log_format, bui_extents, 16);
XFS_CHECK_OFFSET(struct xfs_cui_log_format, cui_extents, 16);
diff --git a/fs/xfs/xfs_log.c b/fs/xfs/xfs_log.c
index 7c590ecdf865..2978de9da38e 100644
--- a/fs/xfs/xfs_log.c
+++ b/fs/xfs/xfs_log.c
@@ -1568,13 +1568,13 @@ xlog_cksum(
struct xlog *log,
struct xlog_rec_header *rhead,
char *dp,
- int size)
+ unsigned int hdrsize,
+ unsigned int size)
{
uint32_t crc;
/* first generate the crc for the record header ... */
- crc = xfs_start_cksum_update((char *)rhead,
- sizeof(struct xlog_rec_header),
+ crc = xfs_start_cksum_update((char *)rhead, hdrsize,
offsetof(struct xlog_rec_header, h_crc));
/* ... then for additional cycle data for v2 logs ... */
@@ -1818,7 +1818,7 @@ xlog_sync(
/* calculcate the checksum */
iclog->ic_header.h_crc = xlog_cksum(log, &iclog->ic_header,
- iclog->ic_datap, size);
+ iclog->ic_datap, XLOG_REC_SIZE, size);
/*
* Intentionally corrupt the log record CRC based on the error injection
* frequency, if defined. This facilitates testing log recovery in the
diff --git a/fs/xfs/xfs_log_priv.h b/fs/xfs/xfs_log_priv.h
index a9a7a271c15b..0cfc654d8e87 100644
--- a/fs/xfs/xfs_log_priv.h
+++ b/fs/xfs/xfs_log_priv.h
@@ -499,8 +499,8 @@ xlog_recover_finish(
extern void
xlog_recover_cancel(struct xlog *);
-extern __le32 xlog_cksum(struct xlog *log, struct xlog_rec_header *rhead,
- char *dp, int size);
+__le32 xlog_cksum(struct xlog *log, struct xlog_rec_header *rhead,
+ char *dp, unsigned int hdrsize, unsigned int size);
extern struct kmem_cache *xfs_log_ticket_cache;
struct xlog_ticket *xlog_ticket_alloc(struct xlog *log, int unit_bytes,
diff --git a/fs/xfs/xfs_log_recover.c b/fs/xfs/xfs_log_recover.c
index 0a4db8efd903..549d60959aee 100644
--- a/fs/xfs/xfs_log_recover.c
+++ b/fs/xfs/xfs_log_recover.c
@@ -2894,9 +2894,24 @@ xlog_recover_process(
int pass,
struct list_head *buffer_list)
{
- __le32 expected_crc = rhead->h_crc, crc;
+ __le32 expected_crc = rhead->h_crc, crc, other_crc;
- crc = xlog_cksum(log, rhead, dp, be32_to_cpu(rhead->h_len));
+ crc = xlog_cksum(log, rhead, dp, XLOG_REC_SIZE,
+ be32_to_cpu(rhead->h_len));
+
+ /*
+ * Look at the end of the struct xlog_rec_header definition in
+ * xfs_log_format.h for the glory details.
+ */
+ if (expected_crc && crc != expected_crc) {
+ other_crc = xlog_cksum(log, rhead, dp, XLOG_REC_SIZE_OTHER,
+ be32_to_cpu(rhead->h_len));
+ if (other_crc == expected_crc) {
+ xfs_notice_once(log->l_mp,
+ "Fixing up incorrect CRC due to padding.");
+ crc = other_crc;
+ }
+ }
/*
* Nothing else to do if this is a CRC verification pass. Just return
The patch below does not apply to the 6.17-stable tree.
If someone wants it applied there, or to any other stable or longterm
tree, then please email the backport, including the original git commit
id to <stable(a)vger.kernel.org>.
To reproduce the conflict and resubmit, you may use the following commands:
git fetch https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git/ linux-6.17.y
git checkout FETCH_HEAD
git cherry-pick -x e747883c7d7306acb4d683038d881528fbfbe749
# <resolve conflicts, build, test, etc.>
git commit -s
git send-email --to '<stable(a)vger.kernel.org>' --in-reply-to '2025101613-unworldly-lumpiness-b4a6@gregkh' --subject-prefix 'PATCH 6.17.y' HEAD^..
Possible dependencies:
thanks,
greg k-h
------------------ original commit in Linus's tree ------------------
From e747883c7d7306acb4d683038d881528fbfbe749 Mon Sep 17 00:00:00 2001
From: Christoph Hellwig <hch(a)lst.de>
Date: Mon, 15 Sep 2025 06:20:30 -0700
Subject: [PATCH] xfs: fix log CRC mismatches between i386 and other
architectures
When mounting file systems with a log that was dirtied on i386 on
other architectures or vice versa, log recovery is unhappy:
[ 11.068052] XFS (vdb): Torn write (CRC failure) detected at log block 0x2. Truncating head block from 0xc.
This is because the CRCs generated by i386 and other architectures
always diff. The reason for that is that sizeof(struct xlog_rec_header)
returns different values for i386 vs the rest (324 vs 328), because the
struct is not sizeof(uint64_t) aligned, and i386 has odd struct size
alignment rules.
This issue goes back to commit 13cdc853c519 ("Add log versioning, and new
super block field for the log stripe") in the xfs-import tree, which
adds log v2 support and the h_size field that causes the unaligned size.
At that time it only mattered for the crude debug only log header
checksum, but with commit 0e446be44806 ("xfs: add CRC checks to the log")
it became a real issue for v5 file system, because now there is a proper
CRC, and regular builds actually expect it match.
Fix this by allowing checksums with and without the padding.
Fixes: 0e446be44806 ("xfs: add CRC checks to the log")
Cc: <stable(a)vger.kernel.org> # v3.8
Signed-off-by: Christoph Hellwig <hch(a)lst.de>
Signed-off-by: Carlos Maiolino <cem(a)kernel.org>
diff --git a/fs/xfs/libxfs/xfs_log_format.h b/fs/xfs/libxfs/xfs_log_format.h
index a42a83211724..fd00b77af32b 100644
--- a/fs/xfs/libxfs/xfs_log_format.h
+++ b/fs/xfs/libxfs/xfs_log_format.h
@@ -173,12 +173,40 @@ typedef struct xlog_rec_header {
__be32 h_prev_block; /* block number to previous LR : 4 */
__be32 h_num_logops; /* number of log operations in this LR : 4 */
__be32 h_cycle_data[XLOG_HEADER_CYCLE_SIZE / BBSIZE];
- /* new fields */
+
+ /* fields added by the Linux port: */
__be32 h_fmt; /* format of log record : 4 */
uuid_t h_fs_uuid; /* uuid of FS : 16 */
+
+ /* fields added for log v2: */
__be32 h_size; /* iclog size : 4 */
+
+ /*
+ * When h_size added for log v2 support, it caused structure to have
+ * a different size on i386 vs all other architectures because the
+ * sum of the size ofthe member is not aligned by that of the largest
+ * __be64-sized member, and i386 has really odd struct alignment rules.
+ *
+ * Due to the way the log headers are placed out on-disk that alone is
+ * not a problem becaue the xlog_rec_header always sits alone in a
+ * BBSIZEs area, and the rest of that area is padded with zeroes.
+ * But xlog_cksum used to calculate the checksum based on the structure
+ * size, and thus gives different checksums for i386 vs the rest.
+ * We now do two checksum validation passes for both sizes to allow
+ * moving v5 file systems with unclean logs between i386 and other
+ * (little-endian) architectures.
+ */
+ __u32 h_pad0;
} xlog_rec_header_t;
+#ifdef __i386__
+#define XLOG_REC_SIZE offsetofend(struct xlog_rec_header, h_size)
+#define XLOG_REC_SIZE_OTHER sizeof(struct xlog_rec_header)
+#else
+#define XLOG_REC_SIZE sizeof(struct xlog_rec_header)
+#define XLOG_REC_SIZE_OTHER offsetofend(struct xlog_rec_header, h_size)
+#endif /* __i386__ */
+
typedef struct xlog_rec_ext_header {
__be32 xh_cycle; /* write cycle of log : 4 */
__be32 xh_cycle_data[XLOG_HEADER_CYCLE_SIZE / BBSIZE]; /* : 256 */
diff --git a/fs/xfs/libxfs/xfs_ondisk.h b/fs/xfs/libxfs/xfs_ondisk.h
index 5ed44fdf7491..7bfa3242e2c5 100644
--- a/fs/xfs/libxfs/xfs_ondisk.h
+++ b/fs/xfs/libxfs/xfs_ondisk.h
@@ -174,6 +174,8 @@ xfs_check_ondisk_structs(void)
XFS_CHECK_STRUCT_SIZE(struct xfs_rud_log_format, 16);
XFS_CHECK_STRUCT_SIZE(struct xfs_map_extent, 32);
XFS_CHECK_STRUCT_SIZE(struct xfs_phys_extent, 16);
+ XFS_CHECK_STRUCT_SIZE(struct xlog_rec_header, 328);
+ XFS_CHECK_STRUCT_SIZE(struct xlog_rec_ext_header, 260);
XFS_CHECK_OFFSET(struct xfs_bui_log_format, bui_extents, 16);
XFS_CHECK_OFFSET(struct xfs_cui_log_format, cui_extents, 16);
diff --git a/fs/xfs/xfs_log.c b/fs/xfs/xfs_log.c
index 7c590ecdf865..2978de9da38e 100644
--- a/fs/xfs/xfs_log.c
+++ b/fs/xfs/xfs_log.c
@@ -1568,13 +1568,13 @@ xlog_cksum(
struct xlog *log,
struct xlog_rec_header *rhead,
char *dp,
- int size)
+ unsigned int hdrsize,
+ unsigned int size)
{
uint32_t crc;
/* first generate the crc for the record header ... */
- crc = xfs_start_cksum_update((char *)rhead,
- sizeof(struct xlog_rec_header),
+ crc = xfs_start_cksum_update((char *)rhead, hdrsize,
offsetof(struct xlog_rec_header, h_crc));
/* ... then for additional cycle data for v2 logs ... */
@@ -1818,7 +1818,7 @@ xlog_sync(
/* calculcate the checksum */
iclog->ic_header.h_crc = xlog_cksum(log, &iclog->ic_header,
- iclog->ic_datap, size);
+ iclog->ic_datap, XLOG_REC_SIZE, size);
/*
* Intentionally corrupt the log record CRC based on the error injection
* frequency, if defined. This facilitates testing log recovery in the
diff --git a/fs/xfs/xfs_log_priv.h b/fs/xfs/xfs_log_priv.h
index a9a7a271c15b..0cfc654d8e87 100644
--- a/fs/xfs/xfs_log_priv.h
+++ b/fs/xfs/xfs_log_priv.h
@@ -499,8 +499,8 @@ xlog_recover_finish(
extern void
xlog_recover_cancel(struct xlog *);
-extern __le32 xlog_cksum(struct xlog *log, struct xlog_rec_header *rhead,
- char *dp, int size);
+__le32 xlog_cksum(struct xlog *log, struct xlog_rec_header *rhead,
+ char *dp, unsigned int hdrsize, unsigned int size);
extern struct kmem_cache *xfs_log_ticket_cache;
struct xlog_ticket *xlog_ticket_alloc(struct xlog *log, int unit_bytes,
diff --git a/fs/xfs/xfs_log_recover.c b/fs/xfs/xfs_log_recover.c
index 0a4db8efd903..549d60959aee 100644
--- a/fs/xfs/xfs_log_recover.c
+++ b/fs/xfs/xfs_log_recover.c
@@ -2894,9 +2894,24 @@ xlog_recover_process(
int pass,
struct list_head *buffer_list)
{
- __le32 expected_crc = rhead->h_crc, crc;
+ __le32 expected_crc = rhead->h_crc, crc, other_crc;
- crc = xlog_cksum(log, rhead, dp, be32_to_cpu(rhead->h_len));
+ crc = xlog_cksum(log, rhead, dp, XLOG_REC_SIZE,
+ be32_to_cpu(rhead->h_len));
+
+ /*
+ * Look at the end of the struct xlog_rec_header definition in
+ * xfs_log_format.h for the glory details.
+ */
+ if (expected_crc && crc != expected_crc) {
+ other_crc = xlog_cksum(log, rhead, dp, XLOG_REC_SIZE_OTHER,
+ be32_to_cpu(rhead->h_len));
+ if (other_crc == expected_crc) {
+ xfs_notice_once(log->l_mp,
+ "Fixing up incorrect CRC due to padding.");
+ crc = other_crc;
+ }
+ }
/*
* Nothing else to do if this is a CRC verification pass. Just return
From: "Darrick J. Wong" <djwong(a)kernel.org>
commit c0e473a0d226479e8e925d5ba93f751d8df628e9 upstream.
With the new large sector size support, it's now the case that
set_blocksize can change i_blksize and the folio order in a manner that
conflicts with a concurrent reader and causes a kernel crash.
Specifically, let's say that udev-worker calls libblkid to detect the
labels on a block device. The read call can create an order-0 folio to
read the first 4096 bytes from the disk. But then udev is preempted.
Next, someone tries to mount an 8k-sectorsize filesystem from the same
block device. The filesystem calls set_blksize, which sets i_blksize to
8192 and the minimum folio order to 1.
Now udev resumes, still holding the order-0 folio it allocated. It then
tries to schedule a read bio and do_mpage_readahead tries to create
bufferheads for the folio. Unfortunately, blocks_per_folio == 0 because
the page size is 4096 but the blocksize is 8192 so no bufferheads are
attached and the bh walk never sets bdev. We then submit the bio with a
NULL block device and crash.
Therefore, truncate the page cache after flushing but before updating
i_blksize. However, that's not enough -- we also need to lock out file
IO and page faults during the update. Take both the i_rwsem and the
invalidate_lock in exclusive mode for invalidations, and in shared mode
for read/write operations.
I don't know if this is the correct fix, but xfs/259 found it.
Signed-off-by: Darrick J. Wong <djwong(a)kernel.org>
Reviewed-by: Christoph Hellwig <hch(a)lst.de>
Reviewed-by: Luis Chamberlain <mcgrof(a)kernel.org>
Tested-by: Shin'ichiro Kawasaki <shinichiro.kawasaki(a)wdc.com>
Link: https://lore.kernel.org/r/174543795699.4139148.2086129139322431423.stgit@fr…
Signed-off-by: Jens Axboe <axboe(a)kernel.dk>
[use bdev->bd_inode instead]
Signed-off-by: Mahmoud Adam <mngyadam(a)amazon.de>
---
Fixes CVE-2025-38073.
block/bdev.c | 17 +++++++++++++++++
block/blk-zoned.c | 5 ++++-
block/fops.c | 16 ++++++++++++++++
block/ioctl.c | 6 ++++++
4 files changed, 43 insertions(+), 1 deletion(-)
diff --git a/block/bdev.c b/block/bdev.c
index 5a54977518eeae..a8357b72a27b86 100644
--- a/block/bdev.c
+++ b/block/bdev.c
@@ -147,9 +147,26 @@ int set_blocksize(struct block_device *bdev, int size)
/* Don't change the size if it is same as current */
if (bdev->bd_inode->i_blkbits != blksize_bits(size)) {
+ /*
+ * Flush and truncate the pagecache before we reconfigure the
+ * mapping geometry because folio sizes are variable now. If a
+ * reader has already allocated a folio whose size is smaller
+ * than the new min_order but invokes readahead after the new
+ * min_order becomes visible, readahead will think there are
+ * "zero" blocks per folio and crash. Take the inode and
+ * invalidation locks to avoid racing with
+ * read/write/fallocate.
+ */
+ inode_lock(bdev->bd_inode);
+ filemap_invalidate_lock(bdev->bd_inode->i_mapping);
+
sync_blockdev(bdev);
+ kill_bdev(bdev);
+
bdev->bd_inode->i_blkbits = blksize_bits(size);
kill_bdev(bdev);
+ filemap_invalidate_unlock(bdev->bd_inode->i_mapping);
+ inode_unlock(bdev->bd_inode);
}
return 0;
}
diff --git a/block/blk-zoned.c b/block/blk-zoned.c
index 619ee41a51cc8c..644bfa1f6753ea 100644
--- a/block/blk-zoned.c
+++ b/block/blk-zoned.c
@@ -401,6 +401,7 @@ int blkdev_zone_mgmt_ioctl(struct block_device *bdev, blk_mode_t mode,
op = REQ_OP_ZONE_RESET;
/* Invalidate the page cache, including dirty pages. */
+ inode_lock(bdev->bd_inode);
filemap_invalidate_lock(bdev->bd_inode->i_mapping);
ret = blkdev_truncate_zone_range(bdev, mode, &zrange);
if (ret)
@@ -423,8 +424,10 @@ int blkdev_zone_mgmt_ioctl(struct block_device *bdev, blk_mode_t mode,
GFP_KERNEL);
fail:
- if (cmd == BLKRESETZONE)
+ if (cmd == BLKRESETZONE) {
filemap_invalidate_unlock(bdev->bd_inode->i_mapping);
+ inode_unlock(bdev->bd_inode);
+ }
return ret;
}
diff --git a/block/fops.c b/block/fops.c
index 7c257eb3564d0c..088143fa9ac9e1 100644
--- a/block/fops.c
+++ b/block/fops.c
@@ -681,7 +681,14 @@ static ssize_t blkdev_write_iter(struct kiocb *iocb, struct iov_iter *from)
ret = direct_write_fallback(iocb, from, ret,
blkdev_buffered_write(iocb, from));
} else {
+ /*
+ * Take i_rwsem and invalidate_lock to avoid racing with
+ * set_blocksize changing i_blkbits/folio order and punching
+ * out the pagecache.
+ */
+ inode_lock_shared(bd_inode);
ret = blkdev_buffered_write(iocb, from);
+ inode_unlock_shared(bd_inode);
}
if (ret > 0)
@@ -693,6 +700,7 @@ static ssize_t blkdev_write_iter(struct kiocb *iocb, struct iov_iter *from)
static ssize_t blkdev_read_iter(struct kiocb *iocb, struct iov_iter *to)
{
struct block_device *bdev = I_BDEV(iocb->ki_filp->f_mapping->host);
+ struct inode *bd_inode = bdev->bd_inode;
loff_t size = bdev_nr_bytes(bdev);
loff_t pos = iocb->ki_pos;
size_t shorted = 0;
@@ -728,7 +736,13 @@ static ssize_t blkdev_read_iter(struct kiocb *iocb, struct iov_iter *to)
goto reexpand;
}
+ /*
+ * Take i_rwsem and invalidate_lock to avoid racing with set_blocksize
+ * changing i_blkbits/folio order and punching out the pagecache.
+ */
+ inode_lock_shared(bd_inode);
ret = filemap_read(iocb, to, ret);
+ inode_unlock_shared(bd_inode);
reexpand:
if (unlikely(shorted))
@@ -771,6 +785,7 @@ static long blkdev_fallocate(struct file *file, int mode, loff_t start,
if ((start | len) & (bdev_logical_block_size(bdev) - 1))
return -EINVAL;
+ inode_lock(inode);
filemap_invalidate_lock(inode->i_mapping);
/*
@@ -811,6 +826,7 @@ static long blkdev_fallocate(struct file *file, int mode, loff_t start,
fail:
filemap_invalidate_unlock(inode->i_mapping);
+ inode_unlock(inode);
return error;
}
diff --git a/block/ioctl.c b/block/ioctl.c
index 231537f79a8cb4..024767fa1e52d5 100644
--- a/block/ioctl.c
+++ b/block/ioctl.c
@@ -114,6 +114,7 @@ static int blk_ioctl_discard(struct block_device *bdev, blk_mode_t mode,
end > bdev_nr_bytes(bdev))
return -EINVAL;
+ inode_lock(inode);
filemap_invalidate_lock(inode->i_mapping);
err = truncate_bdev_range(bdev, mode, start, end - 1);
if (err)
@@ -121,6 +122,7 @@ static int blk_ioctl_discard(struct block_device *bdev, blk_mode_t mode,
err = blkdev_issue_discard(bdev, start >> 9, len >> 9, GFP_KERNEL);
fail:
filemap_invalidate_unlock(inode->i_mapping);
+ inode_unlock(inode);
return err;
}
@@ -146,12 +148,14 @@ static int blk_ioctl_secure_erase(struct block_device *bdev, blk_mode_t mode,
end > bdev_nr_bytes(bdev))
return -EINVAL;
+ inode_lock(bdev->bd_inode);
filemap_invalidate_lock(bdev->bd_inode->i_mapping);
err = truncate_bdev_range(bdev, mode, start, end - 1);
if (!err)
err = blkdev_issue_secure_erase(bdev, start >> 9, len >> 9,
GFP_KERNEL);
filemap_invalidate_unlock(bdev->bd_inode->i_mapping);
+ inode_unlock(bdev->bd_inode);
return err;
}
@@ -184,6 +188,7 @@ static int blk_ioctl_zeroout(struct block_device *bdev, blk_mode_t mode,
return -EINVAL;
/* Invalidate the page cache, including dirty pages */
+ inode_lock(inode);
filemap_invalidate_lock(inode->i_mapping);
err = truncate_bdev_range(bdev, mode, start, end);
if (err)
@@ -194,6 +199,7 @@ static int blk_ioctl_zeroout(struct block_device *bdev, blk_mode_t mode,
fail:
filemap_invalidate_unlock(inode->i_mapping);
+ inode_unlock(inode);
return err;
}
--
2.47.3
Amazon Web Services Development Center Germany GmbH
Tamara-Danz-Str. 13
10243 Berlin
Geschaeftsfuehrung: Christian Schlaeger
Eingetragen am Amtsgericht Charlottenburg unter HRB 257764 B
Sitz: Berlin
Ust-ID: DE 365 538 597
The patch below does not apply to the 6.12-stable tree.
If someone wants it applied there, or to any other stable or longterm
tree, then please email the backport, including the original git commit
id to <stable(a)vger.kernel.org>.
To reproduce the conflict and resubmit, you may use the following commands:
git fetch https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git/ linux-6.12.y
git checkout FETCH_HEAD
git cherry-pick -x 927069c4ac2cd1a37efa468596fb5b8f86db9df0
# <resolve conflicts, build, test, etc.>
git commit -s
git send-email --to '<stable(a)vger.kernel.org>' --in-reply-to '2025102039-bonelike-vocation-0372@gregkh' --subject-prefix 'PATCH 6.12.y' HEAD^..
Possible dependencies:
thanks,
greg k-h
------------------ original commit in Linus's tree ------------------
From 927069c4ac2cd1a37efa468596fb5b8f86db9df0 Mon Sep 17 00:00:00 2001
From: Jens Axboe <axboe(a)kernel.dk>
Date: Mon, 13 Oct 2025 12:05:31 -0600
Subject: [PATCH] Revert "io_uring/rw: drop -EOPNOTSUPP check in
__io_complete_rw_common()"
This reverts commit 90bfb28d5fa8127a113a140c9791ea0b40ab156a.
Kevin reports that this commit causes an issue for him with LVM
snapshots, most likely because of turning off NOWAIT support while a
snapshot is being created. This makes -EOPNOTSUPP bubble back through
the completion handler, where io_uring read/write handling should just
retry it.
Reinstate the previous check removed by the referenced commit.
Cc: stable(a)vger.kernel.org
Fixes: 90bfb28d5fa8 ("io_uring/rw: drop -EOPNOTSUPP check in __io_complete_rw_common()")
Reported-by: Salvatore Bonaccorso <carnil(a)debian.org>
Reported-by: Kevin Lumik <kevin(a)xf.ee>
Link: https://lore.kernel.org/io-uring/cceb723c-051b-4de2-9a4c-4aa82e1619ee@kerne…
Signed-off-by: Jens Axboe <axboe(a)kernel.dk>
diff --git a/io_uring/rw.c b/io_uring/rw.c
index 08882648d569..a0f9d2021e3f 100644
--- a/io_uring/rw.c
+++ b/io_uring/rw.c
@@ -542,7 +542,7 @@ static void __io_complete_rw_common(struct io_kiocb *req, long res)
{
if (res == req->cqe.res)
return;
- if (res == -EAGAIN && io_rw_should_reissue(req)) {
+ if ((res == -EOPNOTSUPP || res == -EAGAIN) && io_rw_should_reissue(req)) {
req->flags |= REQ_F_REISSUE | REQ_F_BL_NO_RECYCLE;
} else {
req_set_fail(req);
The VMA count limit check in do_mmap() and do_brk_flags() uses a
strict inequality (>), which allows a process's VMA count to exceed
the configured sysctl_max_map_count limit by one.
A process with mm->map_count == sysctl_max_map_count will incorrectly
pass this check and then exceed the limit upon allocation of a new VMA
when its map_count is incremented.
Other VMA allocation paths, such as split_vma(), already use the
correct, inclusive (>=) comparison.
Fix this bug by changing the comparison to be inclusive in do_mmap()
and do_brk_flags(), bringing them in line with the correct behavior
of other allocation paths.
Fixes: 1da177e4c3f4 ("Linux-2.6.12-rc2")
Cc: <stable(a)vger.kernel.org>
Cc: Andrew Morton <akpm(a)linux-foundation.org>
Cc: David Hildenbrand <david(a)redhat.com>
Cc: "Liam R. Howlett" <Liam.Howlett(a)oracle.com>
Cc: Lorenzo Stoakes <lorenzo.stoakes(a)oracle.com>
Cc: Mike Rapoport <rppt(a)kernel.org>
Cc: Minchan Kim <minchan(a)kernel.org>
Cc: Pedro Falcato <pfalcato(a)suse.de>
Reviewed-by: David Hildenbrand <david(a)redhat.com>
Reviewed-by: Lorenzo Stoakes <lorenzo.stoakes(a)oracle.com>
Reviewed-by: Pedro Falcato <pfalcato(a)suse.de>
Acked-by: SeongJae Park <sj(a)kernel.org>
Signed-off-by: Kalesh Singh <kaleshsingh(a)google.com>
---
Changes in v3:
- Collect Reviewed-by and Acked-by tags.
Changes in v2:
- Fix mmap check, per Pedro
mm/mmap.c | 2 +-
mm/vma.c | 2 +-
2 files changed, 2 insertions(+), 2 deletions(-)
diff --git a/mm/mmap.c b/mm/mmap.c
index 644f02071a41..da2cbdc0f87b 100644
--- a/mm/mmap.c
+++ b/mm/mmap.c
@@ -374,7 +374,7 @@ unsigned long do_mmap(struct file *file, unsigned long addr,
return -EOVERFLOW;
/* Too many mappings? */
- if (mm->map_count > sysctl_max_map_count)
+ if (mm->map_count >= sysctl_max_map_count)
return -ENOMEM;
/*
diff --git a/mm/vma.c b/mm/vma.c
index a2e1ae954662..fba68f13e628 100644
--- a/mm/vma.c
+++ b/mm/vma.c
@@ -2797,7 +2797,7 @@ int do_brk_flags(struct vma_iterator *vmi, struct vm_area_struct *vma,
if (!may_expand_vm(mm, vm_flags, len >> PAGE_SHIFT))
return -ENOMEM;
- if (mm->map_count > sysctl_max_map_count)
+ if (mm->map_count >= sysctl_max_map_count)
return -ENOMEM;
if (security_vm_enough_memory_mm(mm, len >> PAGE_SHIFT))
--
2.51.0.760.g7b8bcc2412-goog
The "timers: Provide timer_shutdown[_sync]()" patch series implemented a
useful feature that addresses various bugs caused by attempts to rearm
shutdown timers.
https://lore.kernel.org/all/20221123201306.823305113@linutronix.de/
However, this patch series was not fully backported to versions prior to
6.2, requiring separate patches for older kernels if these bugs were
encountered.
The biggest problem with this is that even if these bugs were discovered
and patched in the upstream kernel, if the maintainer or author didn't
create a separate backport patch for versions prior to 6.2, the bugs would
remain untouched in older kernels.
Therefore, to reduce the hassle of having to write a separate patch, we
should backport the remaining unbackported commits from the
"timers: Provide timer_shutdown[_sync]()" patch series to versions prior
to 6.2.
---
Documentation/RCU/Design/Requirements/Requirements.rst | 2 +-
Documentation/core-api/local_ops.rst | 2 +-
Documentation/kernel-hacking/locking.rst | 17 ++++---
Documentation/timers/hrtimers.rst | 2 +-
Documentation/translations/it_IT/kernel-hacking/locking.rst | 14 +++--
Documentation/translations/zh_CN/core-api/local_ops.rst | 2 +-
arch/arm/mach-spear/time.c | 8 +--
drivers/bluetooth/hci_qca.c | 10 +++-
drivers/clocksource/arm_arch_timer.c | 12 ++---
drivers/clocksource/timer-sp804.c | 6 +--
include/linux/timer.h | 2 +
kernel/time/timer.c | 311 ++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++--------------------
12 files changed, 299 insertions(+), 89 deletions(-)
Make sure to drop the reference taken to the iommu platform device when
looking up its driver data during probe_device().
Fixes: b17336c55d89 ("iommu/mediatek: add support for mtk iommu generation one HW")
Cc: stable(a)vger.kernel.org # 4.8
Cc: Honghui Zhang <honghui.zhang(a)mediatek.com>
Acked-by: Robin Murphy <robin.murphy(a)arm.com>
Reviewed-by: Yong Wu <yong.wu(a)mediatek.com>
Signed-off-by: Johan Hovold <johan(a)kernel.org>
---
drivers/iommu/mtk_iommu_v1.c | 2 ++
1 file changed, 2 insertions(+)
diff --git a/drivers/iommu/mtk_iommu_v1.c b/drivers/iommu/mtk_iommu_v1.c
index 10cc0b1197e8..de9153c0a82f 100644
--- a/drivers/iommu/mtk_iommu_v1.c
+++ b/drivers/iommu/mtk_iommu_v1.c
@@ -435,6 +435,8 @@ static int mtk_iommu_v1_create_mapping(struct device *dev,
return -EINVAL;
dev_iommu_priv_set(dev, platform_get_drvdata(m4updev));
+
+ put_device(&m4updev->dev);
}
ret = iommu_fwspec_add_ids(dev, args->args, 1);
--
2.49.1
Hi everyone,
This is a patch series of backports from a upstream commit:
c760bcda8357 ("drm/amd: Check whether secure display TA loaded successfully")
to the following stable kernel trees:
* 6.17.y
* 6.12.y
* 6.6.y
* 6.1.y
Each patch applied without conflicts.
Compiling tests will be done for patches as I send them in.
I have not tested backports personally, but Shuah khan has Kindly offered
to test them.
This is my first patch, please do let me know if there are any corrections
or criticisms, I will take them to heart.
Thank you so much Shuah for providing this opportunity! I'm very grateful for it!
Respectfully,
Adrian Yip
Mario Limonciello (1):
drm/amd: Check whether secure display TA loaded successfully
drivers/gpu/drm/amd/amdgpu/amdgpu_psp.c | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
--
2.51.0
The patch below does not apply to the 6.17-stable tree.
If someone wants it applied there, or to any other stable or longterm
tree, then please email the backport, including the original git commit
id to <stable(a)vger.kernel.org>.
To reproduce the conflict and resubmit, you may use the following commands:
git fetch https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git/ linux-6.17.y
git checkout FETCH_HEAD
git cherry-pick -x ea0d55ae4b3207c33691a73da3443b1fd379f1d2
# <resolve conflicts, build, test, etc.>
git commit -s
git send-email --to '<stable(a)vger.kernel.org>' --in-reply-to '2025102040-gopher-dipping-a96a@gregkh' --subject-prefix 'PATCH 6.17.y' HEAD^..
Possible dependencies:
thanks,
greg k-h
------------------ original commit in Linus's tree ------------------
From ea0d55ae4b3207c33691a73da3443b1fd379f1d2 Mon Sep 17 00:00:00 2001
From: Ada Couprie Diaz <ada.coupriediaz(a)arm.com>
Date: Tue, 14 Oct 2025 10:25:36 +0100
Subject: [PATCH] arm64: debug: always unmask interrupts in el0_softstp()
We intend that EL0 exception handlers unmask all DAIF exceptions
before calling exit_to_user_mode().
When completing single-step of a suspended breakpoint, we do not call
local_daif_restore(DAIF_PROCCTX) before calling exit_to_user_mode(),
leaving all DAIF exceptions masked.
When pseudo-NMIs are not in use this is benign.
When pseudo-NMIs are in use, this is unsound. At this point interrupts
are masked by both DAIF.IF and PMR_EL1, and subsequent irq flag
manipulation may not work correctly. For example, a subsequent
local_irq_enable() within exit_to_user_mode_loop() will only unmask
interrupts via PMR_EL1 (leaving those masked via DAIF.IF), and
anything depending on interrupts being unmasked (e.g. delivery of
signals) will not work correctly.
This was detected by CONFIG_ARM64_DEBUG_PRIORITY_MASKING.
Move the call to `try_step_suspended_breakpoints()` outside of the check
so that interrupts can be unmasked even if we don't call the step handler.
Fixes: 0ac7584c08ce ("arm64: debug: split single stepping exception entry")
Cc: <stable(a)vger.kernel.org> # 6.17
Signed-off-by: Ada Couprie Diaz <ada.coupriediaz(a)arm.com>
Acked-by: Mark Rutland <mark.rutland(a)arm.com>
[catalin.marinas(a)arm.com: added Mark's rewritten commit log and some whitespace]
Signed-off-by: Catalin Marinas <catalin.marinas(a)arm.com>
diff --git a/arch/arm64/kernel/entry-common.c b/arch/arm64/kernel/entry-common.c
index f546a914f041..a9c81715ce59 100644
--- a/arch/arm64/kernel/entry-common.c
+++ b/arch/arm64/kernel/entry-common.c
@@ -697,6 +697,8 @@ static void noinstr el0_breakpt(struct pt_regs *regs, unsigned long esr)
static void noinstr el0_softstp(struct pt_regs *regs, unsigned long esr)
{
+ bool step_done;
+
if (!is_ttbr0_addr(regs->pc))
arm64_apply_bp_hardening();
@@ -707,10 +709,10 @@ static void noinstr el0_softstp(struct pt_regs *regs, unsigned long esr)
* If we are stepping a suspended breakpoint there's nothing more to do:
* the single-step is complete.
*/
- if (!try_step_suspended_breakpoints(regs)) {
- local_daif_restore(DAIF_PROCCTX);
+ step_done = try_step_suspended_breakpoints(regs);
+ local_daif_restore(DAIF_PROCCTX);
+ if (!step_done)
do_el0_softstep(esr, regs);
- }
arm64_exit_to_user_mode(regs);
}
Hi All,
This series is a backport that applies to stable kernels 6.16 and 6.17, of the
recent errata workarounds for Neoverse-V3AE, which were originally posted at:
https://lore.kernel.org/all/20250919145832.4035534-1-ryan.roberts@arm.com/
... and were originally merged upstream in v6.18-rc1.
Thanks,
Ryan
Mark Rutland (2):
arm64: cputype: Add Neoverse-V3AE definitions
arm64: errata: Apply workarounds for Neoverse-V3AE
Documentation/arch/arm64/silicon-errata.rst | 2 ++
arch/arm64/Kconfig | 1 +
arch/arm64/include/asm/cputype.h | 2 ++
arch/arm64/kernel/cpu_errata.c | 1 +
4 files changed, 6 insertions(+)
--
2.43.0
Hi All,
This series is a backport that applies to stable kernels 6.16 and 6.17, of the
recent errata workarounds for Neoverse-V3AE, which were originally posted at:
https://lore.kernel.org/all/20250919145832.4035534-1-ryan.roberts@arm.com/
... and were originally merged upstream in v6.18-rc1.
Thanks,
Ryan
Mark Rutland (2):
arm64: cputype: Add Neoverse-V3AE definitions
arm64: errata: Apply workarounds for Neoverse-V3AE
Documentation/arch/arm64/silicon-errata.rst | 2 ++
arch/arm64/Kconfig | 1 +
arch/arm64/include/asm/cputype.h | 2 ++
arch/arm64/kernel/cpu_errata.c | 1 +
4 files changed, 6 insertions(+)
--
2.43.0
Hi All,
This series is a backport that applies to stable kernels 6.6 and 6.12, of the
recent errata workarounds for Neoverse-V3AE, which were originally posted at:
https://lore.kernel.org/all/20250919145832.4035534-1-ryan.roberts@arm.com/
... and were originally merged upstream in v6.18-rc1.
Thanks,
Ryan
Mark Rutland (2):
arm64: cputype: Add Neoverse-V3AE definitions
arm64: errata: Apply workarounds for Neoverse-V3AE
Documentation/arch/arm64/silicon-errata.rst | 2 ++
arch/arm64/Kconfig | 1 +
arch/arm64/include/asm/cputype.h | 2 ++
arch/arm64/kernel/cpu_errata.c | 1 +
4 files changed, 6 insertions(+)
--
2.43.0
Hi All,
This series is a backport that applies to stable kernels 5.15 and 6.1, of the
recent errata workarounds for Neoverse-V3AE, which were originally posted at:
https://lore.kernel.org/all/20250919145832.4035534-1-ryan.roberts@arm.com/
... and were originally merged upstream in v6.18-rc1.
Thanks,
Ryan
Mark Rutland (2):
arm64: cputype: Add Neoverse-V3AE definitions
arm64: errata: Apply workarounds for Neoverse-V3AE
Documentation/arm64/silicon-errata.rst | 2 ++
arch/arm64/Kconfig | 1 +
arch/arm64/include/asm/cputype.h | 2 ++
arch/arm64/kernel/cpu_errata.c | 1 +
4 files changed, 6 insertions(+)
--
2.43.0
Hi All,
This series is a backport that applies to stable kernels 5.4 and 5.10, of the
recent errata workarounds for Neoverse-V3AE, which were originally posted at:
https://lore.kernel.org/all/20250919145832.4035534-1-ryan.roberts@arm.com/
... and were originally merged upstream in v6.18-rc1.
Thanks,
Ryan
Mark Rutland (2):
arm64: cputype: Add Neoverse-V3AE definitions
arm64: errata: Apply workarounds for Neoverse-V3AE
Documentation/arm64/silicon-errata.rst | 2 ++
arch/arm64/Kconfig | 1 +
arch/arm64/include/asm/cputype.h | 2 ++
arch/arm64/kernel/cpu_errata.c | 1 +
4 files changed, 6 insertions(+)
--
2.43.0
The patch below does not apply to the 6.1-stable tree.
If someone wants it applied there, or to any other stable or longterm
tree, then please email the backport, including the original git commit
id to <stable(a)vger.kernel.org>.
To reproduce the conflict and resubmit, you may use the following commands:
git fetch https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git/ linux-6.1.y
git checkout FETCH_HEAD
git cherry-pick -x 7fa37ba25a1dfc084e24ea9acc14bf1fad8af14c
# <resolve conflicts, build, test, etc.>
git commit -s
git send-email --to '<stable(a)vger.kernel.org>' --in-reply-to '2025101646-overtake-starch-c0ab@gregkh' --subject-prefix 'PATCH 6.1.y' HEAD^..
Possible dependencies:
thanks,
greg k-h
------------------ original commit in Linus's tree ------------------
From 7fa37ba25a1dfc084e24ea9acc14bf1fad8af14c Mon Sep 17 00:00:00 2001
From: Arnd Bergmann <arnd(a)arndb.de>
Date: Thu, 7 Aug 2025 22:54:15 +0200
Subject: [PATCH] media: s5p-mfc: remove an unused/uninitialized variable
The s5p_mfc_cmd_args structure in the v6 driver is never used, not
initialized to anything other than zero, but as of clang-21 this
causes a warning:
drivers/media/platform/samsung/s5p-mfc/s5p_mfc_cmd_v6.c:45:7: error: variable 'h2r_args' is uninitialized when passed as a const pointer argument here [-Werror,-Wuninitialized-const-pointer]
45 | &h2r_args);
| ^~~~~~~~
Just remove this for simplicity. Since the function is also called
through a callback, this does require adding a trivial wrapper with
the correct prototype.
Fixes: f96f3cfa0bb8 ("[media] s5p-mfc: Update MFC v4l2 driver to support MFC6.x")
Cc: stable(a)vger.kernel.org
Signed-off-by: Arnd Bergmann <arnd(a)arndb.de>
Signed-off-by: Hans Verkuil <hverkuil+cisco(a)kernel.org>
diff --git a/drivers/media/platform/samsung/s5p-mfc/s5p_mfc_cmd_v6.c b/drivers/media/platform/samsung/s5p-mfc/s5p_mfc_cmd_v6.c
index 47bc3014b5d8..f7c682fca645 100644
--- a/drivers/media/platform/samsung/s5p-mfc/s5p_mfc_cmd_v6.c
+++ b/drivers/media/platform/samsung/s5p-mfc/s5p_mfc_cmd_v6.c
@@ -14,8 +14,7 @@
#include "s5p_mfc_opr.h"
#include "s5p_mfc_cmd_v6.h"
-static int s5p_mfc_cmd_host2risc_v6(struct s5p_mfc_dev *dev, int cmd,
- const struct s5p_mfc_cmd_args *args)
+static int s5p_mfc_cmd_host2risc_v6(struct s5p_mfc_dev *dev, int cmd)
{
mfc_debug(2, "Issue the command: %d\n", cmd);
@@ -31,7 +30,6 @@ static int s5p_mfc_cmd_host2risc_v6(struct s5p_mfc_dev *dev, int cmd,
static int s5p_mfc_sys_init_cmd_v6(struct s5p_mfc_dev *dev)
{
- struct s5p_mfc_cmd_args h2r_args;
const struct s5p_mfc_buf_size_v6 *buf_size = dev->variant->buf_size->priv;
int ret;
@@ -41,33 +39,23 @@ static int s5p_mfc_sys_init_cmd_v6(struct s5p_mfc_dev *dev)
mfc_write(dev, dev->ctx_buf.dma, S5P_FIMV_CONTEXT_MEM_ADDR_V6);
mfc_write(dev, buf_size->dev_ctx, S5P_FIMV_CONTEXT_MEM_SIZE_V6);
- return s5p_mfc_cmd_host2risc_v6(dev, S5P_FIMV_H2R_CMD_SYS_INIT_V6,
- &h2r_args);
+ return s5p_mfc_cmd_host2risc_v6(dev, S5P_FIMV_H2R_CMD_SYS_INIT_V6);
}
static int s5p_mfc_sleep_cmd_v6(struct s5p_mfc_dev *dev)
{
- struct s5p_mfc_cmd_args h2r_args;
-
- memset(&h2r_args, 0, sizeof(struct s5p_mfc_cmd_args));
- return s5p_mfc_cmd_host2risc_v6(dev, S5P_FIMV_H2R_CMD_SLEEP_V6,
- &h2r_args);
+ return s5p_mfc_cmd_host2risc_v6(dev, S5P_FIMV_H2R_CMD_SLEEP_V6);
}
static int s5p_mfc_wakeup_cmd_v6(struct s5p_mfc_dev *dev)
{
- struct s5p_mfc_cmd_args h2r_args;
-
- memset(&h2r_args, 0, sizeof(struct s5p_mfc_cmd_args));
- return s5p_mfc_cmd_host2risc_v6(dev, S5P_FIMV_H2R_CMD_WAKEUP_V6,
- &h2r_args);
+ return s5p_mfc_cmd_host2risc_v6(dev, S5P_FIMV_H2R_CMD_WAKEUP_V6);
}
/* Open a new instance and get its number */
static int s5p_mfc_open_inst_cmd_v6(struct s5p_mfc_ctx *ctx)
{
struct s5p_mfc_dev *dev = ctx->dev;
- struct s5p_mfc_cmd_args h2r_args;
int codec_type;
mfc_debug(2, "Requested codec mode: %d\n", ctx->codec_mode);
@@ -129,23 +117,20 @@ static int s5p_mfc_open_inst_cmd_v6(struct s5p_mfc_ctx *ctx)
mfc_write(dev, ctx->ctx.size, S5P_FIMV_CONTEXT_MEM_SIZE_V6);
mfc_write(dev, 0, S5P_FIMV_D_CRC_CTRL_V6); /* no crc */
- return s5p_mfc_cmd_host2risc_v6(dev, S5P_FIMV_H2R_CMD_OPEN_INSTANCE_V6,
- &h2r_args);
+ return s5p_mfc_cmd_host2risc_v6(dev, S5P_FIMV_H2R_CMD_OPEN_INSTANCE_V6);
}
/* Close instance */
static int s5p_mfc_close_inst_cmd_v6(struct s5p_mfc_ctx *ctx)
{
struct s5p_mfc_dev *dev = ctx->dev;
- struct s5p_mfc_cmd_args h2r_args;
int ret = 0;
dev->curr_ctx = ctx->num;
if (ctx->state != MFCINST_FREE) {
mfc_write(dev, ctx->inst_no, S5P_FIMV_INSTANCE_ID_V6);
ret = s5p_mfc_cmd_host2risc_v6(dev,
- S5P_FIMV_H2R_CMD_CLOSE_INSTANCE_V6,
- &h2r_args);
+ S5P_FIMV_H2R_CMD_CLOSE_INSTANCE_V6);
} else {
ret = -EINVAL;
}
@@ -153,9 +138,15 @@ static int s5p_mfc_close_inst_cmd_v6(struct s5p_mfc_ctx *ctx)
return ret;
}
+static int s5p_mfc_cmd_host2risc_v6_args(struct s5p_mfc_dev *dev, int cmd,
+ const struct s5p_mfc_cmd_args *ignored)
+{
+ return s5p_mfc_cmd_host2risc_v6(dev, cmd);
+}
+
/* Initialize cmd function pointers for MFC v6 */
static const struct s5p_mfc_hw_cmds s5p_mfc_cmds_v6 = {
- .cmd_host2risc = s5p_mfc_cmd_host2risc_v6,
+ .cmd_host2risc = s5p_mfc_cmd_host2risc_v6_args,
.sys_init_cmd = s5p_mfc_sys_init_cmd_v6,
.sleep_cmd = s5p_mfc_sleep_cmd_v6,
.wakeup_cmd = s5p_mfc_wakeup_cmd_v6,
The patch below does not apply to the 6.6-stable tree.
If someone wants it applied there, or to any other stable or longterm
tree, then please email the backport, including the original git commit
id to <stable(a)vger.kernel.org>.
To reproduce the conflict and resubmit, you may use the following commands:
git fetch https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git/ linux-6.6.y
git checkout FETCH_HEAD
git cherry-pick -x 7fa37ba25a1dfc084e24ea9acc14bf1fad8af14c
# <resolve conflicts, build, test, etc.>
git commit -s
git send-email --to '<stable(a)vger.kernel.org>' --in-reply-to '2025101646-unfunded-bootlace-0264@gregkh' --subject-prefix 'PATCH 6.6.y' HEAD^..
Possible dependencies:
thanks,
greg k-h
------------------ original commit in Linus's tree ------------------
From 7fa37ba25a1dfc084e24ea9acc14bf1fad8af14c Mon Sep 17 00:00:00 2001
From: Arnd Bergmann <arnd(a)arndb.de>
Date: Thu, 7 Aug 2025 22:54:15 +0200
Subject: [PATCH] media: s5p-mfc: remove an unused/uninitialized variable
The s5p_mfc_cmd_args structure in the v6 driver is never used, not
initialized to anything other than zero, but as of clang-21 this
causes a warning:
drivers/media/platform/samsung/s5p-mfc/s5p_mfc_cmd_v6.c:45:7: error: variable 'h2r_args' is uninitialized when passed as a const pointer argument here [-Werror,-Wuninitialized-const-pointer]
45 | &h2r_args);
| ^~~~~~~~
Just remove this for simplicity. Since the function is also called
through a callback, this does require adding a trivial wrapper with
the correct prototype.
Fixes: f96f3cfa0bb8 ("[media] s5p-mfc: Update MFC v4l2 driver to support MFC6.x")
Cc: stable(a)vger.kernel.org
Signed-off-by: Arnd Bergmann <arnd(a)arndb.de>
Signed-off-by: Hans Verkuil <hverkuil+cisco(a)kernel.org>
diff --git a/drivers/media/platform/samsung/s5p-mfc/s5p_mfc_cmd_v6.c b/drivers/media/platform/samsung/s5p-mfc/s5p_mfc_cmd_v6.c
index 47bc3014b5d8..f7c682fca645 100644
--- a/drivers/media/platform/samsung/s5p-mfc/s5p_mfc_cmd_v6.c
+++ b/drivers/media/platform/samsung/s5p-mfc/s5p_mfc_cmd_v6.c
@@ -14,8 +14,7 @@
#include "s5p_mfc_opr.h"
#include "s5p_mfc_cmd_v6.h"
-static int s5p_mfc_cmd_host2risc_v6(struct s5p_mfc_dev *dev, int cmd,
- const struct s5p_mfc_cmd_args *args)
+static int s5p_mfc_cmd_host2risc_v6(struct s5p_mfc_dev *dev, int cmd)
{
mfc_debug(2, "Issue the command: %d\n", cmd);
@@ -31,7 +30,6 @@ static int s5p_mfc_cmd_host2risc_v6(struct s5p_mfc_dev *dev, int cmd,
static int s5p_mfc_sys_init_cmd_v6(struct s5p_mfc_dev *dev)
{
- struct s5p_mfc_cmd_args h2r_args;
const struct s5p_mfc_buf_size_v6 *buf_size = dev->variant->buf_size->priv;
int ret;
@@ -41,33 +39,23 @@ static int s5p_mfc_sys_init_cmd_v6(struct s5p_mfc_dev *dev)
mfc_write(dev, dev->ctx_buf.dma, S5P_FIMV_CONTEXT_MEM_ADDR_V6);
mfc_write(dev, buf_size->dev_ctx, S5P_FIMV_CONTEXT_MEM_SIZE_V6);
- return s5p_mfc_cmd_host2risc_v6(dev, S5P_FIMV_H2R_CMD_SYS_INIT_V6,
- &h2r_args);
+ return s5p_mfc_cmd_host2risc_v6(dev, S5P_FIMV_H2R_CMD_SYS_INIT_V6);
}
static int s5p_mfc_sleep_cmd_v6(struct s5p_mfc_dev *dev)
{
- struct s5p_mfc_cmd_args h2r_args;
-
- memset(&h2r_args, 0, sizeof(struct s5p_mfc_cmd_args));
- return s5p_mfc_cmd_host2risc_v6(dev, S5P_FIMV_H2R_CMD_SLEEP_V6,
- &h2r_args);
+ return s5p_mfc_cmd_host2risc_v6(dev, S5P_FIMV_H2R_CMD_SLEEP_V6);
}
static int s5p_mfc_wakeup_cmd_v6(struct s5p_mfc_dev *dev)
{
- struct s5p_mfc_cmd_args h2r_args;
-
- memset(&h2r_args, 0, sizeof(struct s5p_mfc_cmd_args));
- return s5p_mfc_cmd_host2risc_v6(dev, S5P_FIMV_H2R_CMD_WAKEUP_V6,
- &h2r_args);
+ return s5p_mfc_cmd_host2risc_v6(dev, S5P_FIMV_H2R_CMD_WAKEUP_V6);
}
/* Open a new instance and get its number */
static int s5p_mfc_open_inst_cmd_v6(struct s5p_mfc_ctx *ctx)
{
struct s5p_mfc_dev *dev = ctx->dev;
- struct s5p_mfc_cmd_args h2r_args;
int codec_type;
mfc_debug(2, "Requested codec mode: %d\n", ctx->codec_mode);
@@ -129,23 +117,20 @@ static int s5p_mfc_open_inst_cmd_v6(struct s5p_mfc_ctx *ctx)
mfc_write(dev, ctx->ctx.size, S5P_FIMV_CONTEXT_MEM_SIZE_V6);
mfc_write(dev, 0, S5P_FIMV_D_CRC_CTRL_V6); /* no crc */
- return s5p_mfc_cmd_host2risc_v6(dev, S5P_FIMV_H2R_CMD_OPEN_INSTANCE_V6,
- &h2r_args);
+ return s5p_mfc_cmd_host2risc_v6(dev, S5P_FIMV_H2R_CMD_OPEN_INSTANCE_V6);
}
/* Close instance */
static int s5p_mfc_close_inst_cmd_v6(struct s5p_mfc_ctx *ctx)
{
struct s5p_mfc_dev *dev = ctx->dev;
- struct s5p_mfc_cmd_args h2r_args;
int ret = 0;
dev->curr_ctx = ctx->num;
if (ctx->state != MFCINST_FREE) {
mfc_write(dev, ctx->inst_no, S5P_FIMV_INSTANCE_ID_V6);
ret = s5p_mfc_cmd_host2risc_v6(dev,
- S5P_FIMV_H2R_CMD_CLOSE_INSTANCE_V6,
- &h2r_args);
+ S5P_FIMV_H2R_CMD_CLOSE_INSTANCE_V6);
} else {
ret = -EINVAL;
}
@@ -153,9 +138,15 @@ static int s5p_mfc_close_inst_cmd_v6(struct s5p_mfc_ctx *ctx)
return ret;
}
+static int s5p_mfc_cmd_host2risc_v6_args(struct s5p_mfc_dev *dev, int cmd,
+ const struct s5p_mfc_cmd_args *ignored)
+{
+ return s5p_mfc_cmd_host2risc_v6(dev, cmd);
+}
+
/* Initialize cmd function pointers for MFC v6 */
static const struct s5p_mfc_hw_cmds s5p_mfc_cmds_v6 = {
- .cmd_host2risc = s5p_mfc_cmd_host2risc_v6,
+ .cmd_host2risc = s5p_mfc_cmd_host2risc_v6_args,
.sys_init_cmd = s5p_mfc_sys_init_cmd_v6,
.sleep_cmd = s5p_mfc_sleep_cmd_v6,
.wakeup_cmd = s5p_mfc_wakeup_cmd_v6,
When there is no port entry in the tcpci entry itself, the driver will
trigger an error message "OF: graph: no port node found in /...../typec" .
It is documented that the dts node should contain an connector entry
with ports and several port pointing to devices with usb-role-switch
property set. Only when those connector entry is missing, it should
check for port entries in the main node.
We switch the search order for looking after ports, which will avoid the
failure message while there are explicit connector entries.
Fixes: d56de8c9a17d ("usb: typec: tcpm: try to get role switch from tcpc fwnode")
Cc: stable(a)vger.kernel.org
Signed-off-by: Michael Grzeschik <m.grzeschik(a)pengutronix.de>
---
Changes in v2:
- fixed typos in the description
- added fixes tag
- added Cc: stable(a)vger.kernel.org
- Link to v1: https://lore.kernel.org/r/20251003-b4-ml-topic-tcpm-v1-1-3cdd05588acb@pengu…
---
drivers/usb/typec/tcpm/tcpm.c | 4 ++--
1 file changed, 2 insertions(+), 2 deletions(-)
diff --git a/drivers/usb/typec/tcpm/tcpm.c b/drivers/usb/typec/tcpm/tcpm.c
index b2a568a5bc9b0ba5c50b7031d8e21ee09cefa349..cc78770509dbc6460d75816f544173d6ab4ef873 100644
--- a/drivers/usb/typec/tcpm/tcpm.c
+++ b/drivers/usb/typec/tcpm/tcpm.c
@@ -7876,9 +7876,9 @@ struct tcpm_port *tcpm_register_port(struct device *dev, struct tcpc_dev *tcpc)
port->partner_desc.identity = &port->partner_ident;
- port->role_sw = usb_role_switch_get(port->dev);
+ port->role_sw = fwnode_usb_role_switch_get(tcpc->fwnode);
if (!port->role_sw)
- port->role_sw = fwnode_usb_role_switch_get(tcpc->fwnode);
+ port->role_sw = usb_role_switch_get(port->dev);
if (IS_ERR(port->role_sw)) {
err = PTR_ERR(port->role_sw);
goto out_destroy_wq;
---
base-commit: e406d57be7bd2a4e73ea512c1ae36a40a44e499e
change-id: 20251003-b4-ml-topic-tcpm-27146727d76a
Best regards,
--
Michael Grzeschik <m.grzeschik(a)pengutronix.de>
Hi All,
This series is a backport intended for all supported stable kernels (5.4-6.17)
of the recent errata workarounds for Neoverse-V3AE, which were originally posted
at:
https://lore.kernel.org/all/20250919145832.4035534-1-ryan.roberts@arm.com/
... and were originally merged upstream in v6.18-rc1.
I've tested that these patches apply to 5.4-6.12 without issue, but there is a
trivial conflict to resolve in silicon-errata.rst for it to apply to 6.16 and
6.17. Are you happy to deal with that or should I send a separate series?
Thanks,
Ryan
Mark Rutland (2):
arm64: cputype: Add Neoverse-V3AE definitions
arm64: errata: Apply workarounds for Neoverse-V3AE
Documentation/arch/arm64/silicon-errata.rst | 2 ++
arch/arm64/Kconfig | 1 +
arch/arm64/include/asm/cputype.h | 2 ++
arch/arm64/kernel/cpu_errata.c | 1 +
4 files changed, 6 insertions(+)
--
2.43.0
The patch below does not apply to the 5.10-stable tree.
If someone wants it applied there, or to any other stable or longterm
tree, then please email the backport, including the original git commit
id to <stable(a)vger.kernel.org>.
To reproduce the conflict and resubmit, you may use the following commands:
git fetch https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git/ linux-5.10.y
git checkout FETCH_HEAD
git cherry-pick -x 3a4b9d027e4061766f618292df91760ea64a1fcc
# <resolve conflicts, build, test, etc.>
git commit -s
git send-email --to '<stable(a)vger.kernel.org>' --in-reply-to '2025101613-nullify-embolism-0853@gregkh' --subject-prefix 'PATCH 5.10.y' HEAD^..
Possible dependencies:
thanks,
greg k-h
------------------ original commit in Linus's tree ------------------
From 3a4b9d027e4061766f618292df91760ea64a1fcc Mon Sep 17 00:00:00 2001
From: Jisheng Zhang <jszhang(a)kernel.org>
Date: Tue, 19 Aug 2025 19:42:24 +0800
Subject: [PATCH] pwm: berlin: Fix wrong register in suspend/resume
MIME-Version: 1.0
Content-Type: text/plain; charset=UTF-8
Content-Transfer-Encoding: 8bit
The 'enable' register should be BERLIN_PWM_EN rather than
BERLIN_PWM_ENABLE, otherwise, the driver accesses wrong address, there
will be cpu exception then kernel panic during suspend/resume.
Fixes: bbf0722c1c66 ("pwm: berlin: Add suspend/resume support")
Signed-off-by: Jisheng Zhang <jszhang(a)kernel.org>
Link: https://lore.kernel.org/r/20250819114224.31825-1-jszhang@kernel.org
Cc: stable(a)vger.kernel.org
Signed-off-by: Uwe Kleine-König <ukleinek(a)kernel.org>
diff --git a/drivers/pwm/pwm-berlin.c b/drivers/pwm/pwm-berlin.c
index 831aed228caf..858d36991374 100644
--- a/drivers/pwm/pwm-berlin.c
+++ b/drivers/pwm/pwm-berlin.c
@@ -234,7 +234,7 @@ static int berlin_pwm_suspend(struct device *dev)
for (i = 0; i < chip->npwm; i++) {
struct berlin_pwm_channel *channel = &bpc->channel[i];
- channel->enable = berlin_pwm_readl(bpc, i, BERLIN_PWM_ENABLE);
+ channel->enable = berlin_pwm_readl(bpc, i, BERLIN_PWM_EN);
channel->ctrl = berlin_pwm_readl(bpc, i, BERLIN_PWM_CONTROL);
channel->duty = berlin_pwm_readl(bpc, i, BERLIN_PWM_DUTY);
channel->tcnt = berlin_pwm_readl(bpc, i, BERLIN_PWM_TCNT);
@@ -262,7 +262,7 @@ static int berlin_pwm_resume(struct device *dev)
berlin_pwm_writel(bpc, i, channel->ctrl, BERLIN_PWM_CONTROL);
berlin_pwm_writel(bpc, i, channel->duty, BERLIN_PWM_DUTY);
berlin_pwm_writel(bpc, i, channel->tcnt, BERLIN_PWM_TCNT);
- berlin_pwm_writel(bpc, i, channel->enable, BERLIN_PWM_ENABLE);
+ berlin_pwm_writel(bpc, i, channel->enable, BERLIN_PWM_EN);
}
return 0;
The patch below does not apply to the 6.12-stable tree.
If someone wants it applied there, or to any other stable or longterm
tree, then please email the backport, including the original git commit
id to <stable(a)vger.kernel.org>.
To reproduce the conflict and resubmit, you may use the following commands:
git fetch https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git/ linux-6.12.y
git checkout FETCH_HEAD
git cherry-pick -x d30203739be798d3de5c84db3060e96f00c54e82
# <resolve conflicts, build, test, etc.>
git commit -s
git send-email --to '<stable(a)vger.kernel.org>' --in-reply-to '2025102056-repent-designate-4c6c@gregkh' --subject-prefix 'PATCH 6.12.y' HEAD^..
Possible dependencies:
thanks,
greg k-h
------------------ original commit in Linus's tree ------------------
From d30203739be798d3de5c84db3060e96f00c54e82 Mon Sep 17 00:00:00 2001
From: Lucas De Marchi <lucas.demarchi(a)intel.com>
Date: Thu, 18 Sep 2025 13:58:57 -0700
Subject: [PATCH] drm/xe: Move rebar to be done earlier
MIME-Version: 1.0
Content-Type: text/plain; charset=UTF-8
Content-Transfer-Encoding: 8bit
There may be cases in which the BAR0 also needs to move to accommodate
the bigger BAR2. However if it's not released, the BAR2 resize fails.
During the vram probe it can't be released as it's already in use by
xe_mmio for early register access.
Add a new function in xe_vram and let xe_pci call it directly before
even early device probe. This allows the BAR2 to resize in cases BAR0
also needs to move, assuming there aren't other reasons to hold that
move:
[] xe 0000:03:00.0: vgaarb: deactivate vga console
[] xe 0000:03:00.0: [drm] Attempting to resize bar from 8192MiB -> 16384MiB
[] xe 0000:03:00.0: BAR 0 [mem 0x83000000-0x83ffffff 64bit]: releasing
[] xe 0000:03:00.0: BAR 2 [mem 0x4000000000-0x41ffffffff 64bit pref]: releasing
[] pcieport 0000:02:01.0: bridge window [mem 0x4000000000-0x41ffffffff 64bit pref]: releasing
[] pcieport 0000:01:00.0: bridge window [mem 0x4000000000-0x41ffffffff 64bit pref]: releasing
[] pcieport 0000:01:00.0: bridge window [mem 0x4000000000-0x43ffffffff 64bit pref]: assigned
[] pcieport 0000:02:01.0: bridge window [mem 0x4000000000-0x43ffffffff 64bit pref]: assigned
[] xe 0000:03:00.0: BAR 2 [mem 0x4000000000-0x43ffffffff 64bit pref]: assigned
[] xe 0000:03:00.0: BAR 0 [mem 0x83000000-0x83ffffff 64bit]: assigned
[] pcieport 0000:00:01.0: PCI bridge to [bus 01-04]
[] pcieport 0000:00:01.0: bridge window [mem 0x83000000-0x840fffff]
[] pcieport 0000:00:01.0: bridge window [mem 0x4000000000-0x44007fffff 64bit pref]
[] pcieport 0000:01:00.0: PCI bridge to [bus 02-04]
[] pcieport 0000:01:00.0: bridge window [mem 0x83000000-0x840fffff]
[] pcieport 0000:01:00.0: bridge window [mem 0x4000000000-0x43ffffffff 64bit pref]
[] pcieport 0000:02:01.0: PCI bridge to [bus 03]
[] pcieport 0000:02:01.0: bridge window [mem 0x83000000-0x83ffffff]
[] pcieport 0000:02:01.0: bridge window [mem 0x4000000000-0x43ffffffff 64bit pref]
[] xe 0000:03:00.0: [drm] BAR2 resized to 16384M
[] xe 0000:03:00.0: [drm:xe_pci_probe [xe]] BATTLEMAGE e221:0000 dgfx:1 gfx:Xe2_HPG (20.02) ...
For BMG there are additional fix needed in the PCI side, but this
helps getting it to a working resize.
All the rebar logic is more pci-specific than xe-specific and can be
done very early in the probe sequence. In future it would be good to
move it out of xe_vram.c, but this refactor is left for later.
Cc: Ilpo Järvinen <ilpo.jarvinen(a)linux.intel.com>
Cc: stable(a)vger.kernel.org # 6.12+
Link: https://lore.kernel.org/intel-xe/fafda2a3-fc63-ce97-d22b-803f771a4d19@linux…
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen(a)linux.intel.com>
Link: https://lore.kernel.org/r/20250918-xe-pci-rebar-2-v1-2-6c094702a074@intel.c…
Signed-off-by: Lucas De Marchi <lucas.demarchi(a)intel.com>
(cherry picked from commit 45e33f220fd625492c11e15733d8e9b4f9db82a4)
Signed-off-by: Lucas De Marchi <lucas.demarchi(a)intel.com>
diff --git a/drivers/gpu/drm/xe/xe_pci.c b/drivers/gpu/drm/xe/xe_pci.c
index be91343829dd..9a6df79fc5b6 100644
--- a/drivers/gpu/drm/xe/xe_pci.c
+++ b/drivers/gpu/drm/xe/xe_pci.c
@@ -867,6 +867,8 @@ static int xe_pci_probe(struct pci_dev *pdev, const struct pci_device_id *ent)
if (err)
return err;
+ xe_vram_resize_bar(xe);
+
err = xe_device_probe_early(xe);
/*
* In Boot Survivability mode, no drm card is exposed and driver
diff --git a/drivers/gpu/drm/xe/xe_vram.c b/drivers/gpu/drm/xe/xe_vram.c
index b44ebf50fedb..652df7a5f4f6 100644
--- a/drivers/gpu/drm/xe/xe_vram.c
+++ b/drivers/gpu/drm/xe/xe_vram.c
@@ -26,15 +26,35 @@
#define BAR_SIZE_SHIFT 20
-static void
-_resize_bar(struct xe_device *xe, int resno, resource_size_t size)
+/*
+ * Release all the BARs that could influence/block LMEMBAR resizing, i.e.
+ * assigned IORESOURCE_MEM_64 BARs
+ */
+static void release_bars(struct pci_dev *pdev)
+{
+ struct resource *res;
+ int i;
+
+ pci_dev_for_each_resource(pdev, res, i) {
+ /* Resource already un-assigned, do not reset it */
+ if (!res->parent)
+ continue;
+
+ /* No need to release unrelated BARs */
+ if (!(res->flags & IORESOURCE_MEM_64))
+ continue;
+
+ pci_release_resource(pdev, i);
+ }
+}
+
+static void resize_bar(struct xe_device *xe, int resno, resource_size_t size)
{
struct pci_dev *pdev = to_pci_dev(xe->drm.dev);
int bar_size = pci_rebar_bytes_to_size(size);
int ret;
- if (pci_resource_len(pdev, resno))
- pci_release_resource(pdev, resno);
+ release_bars(pdev);
ret = pci_resize_resource(pdev, resno, bar_size);
if (ret) {
@@ -50,7 +70,7 @@ _resize_bar(struct xe_device *xe, int resno, resource_size_t size)
* if force_vram_bar_size is set, attempt to set to the requested size
* else set to maximum possible size
*/
-static void resize_vram_bar(struct xe_device *xe)
+void xe_vram_resize_bar(struct xe_device *xe)
{
int force_vram_bar_size = xe_modparam.force_vram_bar_size;
struct pci_dev *pdev = to_pci_dev(xe->drm.dev);
@@ -119,7 +139,7 @@ static void resize_vram_bar(struct xe_device *xe)
pci_read_config_dword(pdev, PCI_COMMAND, &pci_cmd);
pci_write_config_dword(pdev, PCI_COMMAND, pci_cmd & ~PCI_COMMAND_MEMORY);
- _resize_bar(xe, LMEM_BAR, rebar_size);
+ resize_bar(xe, LMEM_BAR, rebar_size);
pci_assign_unassigned_bus_resources(pdev->bus);
pci_write_config_dword(pdev, PCI_COMMAND, pci_cmd);
@@ -148,8 +168,6 @@ static int determine_lmem_bar_size(struct xe_device *xe, struct xe_vram_region *
return -ENXIO;
}
- resize_vram_bar(xe);
-
lmem_bar->io_start = pci_resource_start(pdev, LMEM_BAR);
lmem_bar->io_size = pci_resource_len(pdev, LMEM_BAR);
if (!lmem_bar->io_size)
diff --git a/drivers/gpu/drm/xe/xe_vram.h b/drivers/gpu/drm/xe/xe_vram.h
index 72860f714fc6..13505cfb184d 100644
--- a/drivers/gpu/drm/xe/xe_vram.h
+++ b/drivers/gpu/drm/xe/xe_vram.h
@@ -11,6 +11,7 @@
struct xe_device;
struct xe_vram_region;
+void xe_vram_resize_bar(struct xe_device *xe);
int xe_vram_probe(struct xe_device *xe);
struct xe_vram_region *xe_vram_region_alloc(struct xe_device *xe, u8 id, u32 placement);
The patch below does not apply to the 6.12-stable tree.
If someone wants it applied there, or to any other stable or longterm
tree, then please email the backport, including the original git commit
id to <stable(a)vger.kernel.org>.
To reproduce the conflict and resubmit, you may use the following commands:
git fetch https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git/ linux-6.12.y
git checkout FETCH_HEAD
git cherry-pick -x 7ac74613e5f2ef3450f44fd2127198662c2563a9
# <resolve conflicts, build, test, etc.>
git commit -s
git send-email --to '<stable(a)vger.kernel.org>' --in-reply-to '2025102049-poet-heavily-4fc1@gregkh' --subject-prefix 'PATCH 6.12.y' HEAD^..
Possible dependencies:
thanks,
greg k-h
------------------ original commit in Linus's tree ------------------
From 7ac74613e5f2ef3450f44fd2127198662c2563a9 Mon Sep 17 00:00:00 2001
From: Matthew Brost <matthew.brost(a)intel.com>
Date: Thu, 9 Oct 2025 04:06:18 -0700
Subject: [PATCH] drm/xe: Don't allow evicting of BOs in same VM in array of VM
binds
MIME-Version: 1.0
Content-Type: text/plain; charset=UTF-8
Content-Transfer-Encoding: 8bit
An array of VM binds can potentially evict other buffer objects (BOs)
within the same VM under certain conditions, which may lead to NULL
pointer dereferences later in the bind pipeline. To prevent this, clear
the allow_res_evict flag in the xe_bo_validate call.
v2:
- Invert polarity of no_res_evict (Thomas)
- Add comment in code explaining issue (Thomas)
Cc: stable(a)vger.kernel.org
Reported-by: Paulo Zanoni <paulo.r.zanoni(a)intel.com>
Closes: https://gitlab.freedesktop.org/drm/xe/kernel/-/issues/6268
Fixes: 774b5fa509a9 ("drm/xe: Avoid evicting object of the same vm in none fault mode")
Fixes: 77f2ef3f16f5 ("drm/xe: Lock all gpuva ops during VM bind IOCTL")
Fixes: dd08ebf6c352 ("drm/xe: Introduce a new DRM driver for Intel GPUs")
Signed-off-by: Matthew Brost <matthew.brost(a)intel.com>
Tested-by: Paulo Zanoni <paulo.r.zanoni(a)intel.com>
Reviewed-by: Thomas Hellström <thomas.hellstrom(a)linux.intel.com>
Link: https://lore.kernel.org/r/20251009110618.3481870-1-matthew.brost@intel.com
(cherry picked from commit 8b9ba8d6d95fe75fed6b0480bb03da4b321bea08)
Signed-off-by: Lucas De Marchi <lucas.demarchi(a)intel.com>
diff --git a/drivers/gpu/drm/xe/xe_vm.c b/drivers/gpu/drm/xe/xe_vm.c
index 027e6ce648c5..f602b874e054 100644
--- a/drivers/gpu/drm/xe/xe_vm.c
+++ b/drivers/gpu/drm/xe/xe_vm.c
@@ -2832,7 +2832,7 @@ static void vm_bind_ioctl_ops_unwind(struct xe_vm *vm,
}
static int vma_lock_and_validate(struct drm_exec *exec, struct xe_vma *vma,
- bool validate)
+ bool res_evict, bool validate)
{
struct xe_bo *bo = xe_vma_bo(vma);
struct xe_vm *vm = xe_vma_vm(vma);
@@ -2843,7 +2843,8 @@ static int vma_lock_and_validate(struct drm_exec *exec, struct xe_vma *vma,
err = drm_exec_lock_obj(exec, &bo->ttm.base);
if (!err && validate)
err = xe_bo_validate(bo, vm,
- !xe_vm_in_preempt_fence_mode(vm), exec);
+ !xe_vm_in_preempt_fence_mode(vm) &&
+ res_evict, exec);
}
return err;
@@ -2913,14 +2914,23 @@ static int prefetch_ranges(struct xe_vm *vm, struct xe_vma_op *op)
}
static int op_lock_and_prep(struct drm_exec *exec, struct xe_vm *vm,
- struct xe_vma_op *op)
+ struct xe_vma_ops *vops, struct xe_vma_op *op)
{
int err = 0;
+ bool res_evict;
+
+ /*
+ * We only allow evicting a BO within the VM if it is not part of an
+ * array of binds, as an array of binds can evict another BO within the
+ * bind.
+ */
+ res_evict = !(vops->flags & XE_VMA_OPS_ARRAY_OF_BINDS);
switch (op->base.op) {
case DRM_GPUVA_OP_MAP:
if (!op->map.invalidate_on_bind)
err = vma_lock_and_validate(exec, op->map.vma,
+ res_evict,
!xe_vm_in_fault_mode(vm) ||
op->map.immediate);
break;
@@ -2931,11 +2941,13 @@ static int op_lock_and_prep(struct drm_exec *exec, struct xe_vm *vm,
err = vma_lock_and_validate(exec,
gpuva_to_vma(op->base.remap.unmap->va),
- false);
+ res_evict, false);
if (!err && op->remap.prev)
- err = vma_lock_and_validate(exec, op->remap.prev, true);
+ err = vma_lock_and_validate(exec, op->remap.prev,
+ res_evict, true);
if (!err && op->remap.next)
- err = vma_lock_and_validate(exec, op->remap.next, true);
+ err = vma_lock_and_validate(exec, op->remap.next,
+ res_evict, true);
break;
case DRM_GPUVA_OP_UNMAP:
err = check_ufence(gpuva_to_vma(op->base.unmap.va));
@@ -2944,7 +2956,7 @@ static int op_lock_and_prep(struct drm_exec *exec, struct xe_vm *vm,
err = vma_lock_and_validate(exec,
gpuva_to_vma(op->base.unmap.va),
- false);
+ res_evict, false);
break;
case DRM_GPUVA_OP_PREFETCH:
{
@@ -2959,7 +2971,7 @@ static int op_lock_and_prep(struct drm_exec *exec, struct xe_vm *vm,
err = vma_lock_and_validate(exec,
gpuva_to_vma(op->base.prefetch.va),
- false);
+ res_evict, false);
if (!err && !xe_vma_has_no_bo(vma))
err = xe_bo_migrate(xe_vma_bo(vma),
region_to_mem_type[region],
@@ -3005,7 +3017,7 @@ static int vm_bind_ioctl_ops_lock_and_prep(struct drm_exec *exec,
return err;
list_for_each_entry(op, &vops->list, link) {
- err = op_lock_and_prep(exec, vm, op);
+ err = op_lock_and_prep(exec, vm, vops, op);
if (err)
return err;
}
@@ -3638,6 +3650,8 @@ int xe_vm_bind_ioctl(struct drm_device *dev, void *data, struct drm_file *file)
}
xe_vma_ops_init(&vops, vm, q, syncs, num_syncs);
+ if (args->num_binds > 1)
+ vops.flags |= XE_VMA_OPS_ARRAY_OF_BINDS;
for (i = 0; i < args->num_binds; ++i) {
u64 range = bind_ops[i].range;
u64 addr = bind_ops[i].addr;
diff --git a/drivers/gpu/drm/xe/xe_vm_types.h b/drivers/gpu/drm/xe/xe_vm_types.h
index da39940501d8..413353e1c225 100644
--- a/drivers/gpu/drm/xe/xe_vm_types.h
+++ b/drivers/gpu/drm/xe/xe_vm_types.h
@@ -476,6 +476,7 @@ struct xe_vma_ops {
/** @flag: signify the properties within xe_vma_ops*/
#define XE_VMA_OPS_FLAG_HAS_SVM_PREFETCH BIT(0)
#define XE_VMA_OPS_FLAG_MADVISE BIT(1)
+#define XE_VMA_OPS_ARRAY_OF_BINDS BIT(2)
u32 flags;
#ifdef TEST_VM_OPS_ERROR
/** @inject_error: inject error to test error handling */
The patch below does not apply to the 5.4-stable tree.
If someone wants it applied there, or to any other stable or longterm
tree, then please email the backport, including the original git commit
id to <stable(a)vger.kernel.org>.
To reproduce the conflict and resubmit, you may use the following commands:
git fetch https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git/ linux-5.4.y
git checkout FETCH_HEAD
git cherry-pick -x 0aa1b76fe1429629215a7c79820e4b96233ac4a3
# <resolve conflicts, build, test, etc.>
git commit -s
git send-email --to '<stable(a)vger.kernel.org>' --in-reply-to '2025102045-swimmer-bagel-53c2@gregkh' --subject-prefix 'PATCH 5.4.y' HEAD^..
Possible dependencies:
thanks,
greg k-h
------------------ original commit in Linus's tree ------------------
From 0aa1b76fe1429629215a7c79820e4b96233ac4a3 Mon Sep 17 00:00:00 2001
From: Oliver Upton <oliver.upton(a)linux.dev>
Date: Tue, 30 Sep 2025 01:52:37 -0700
Subject: [PATCH] KVM: arm64: Prevent access to vCPU events before init
Another day, another syzkaller bug. KVM erroneously allows userspace to
pend vCPU events for a vCPU that hasn't been initialized yet, leading to
KVM interpreting a bunch of uninitialized garbage for routing /
injecting the exception.
In one case the injection code and the hyp disagree on whether the vCPU
has a 32bit EL1 and put the vCPU into an illegal mode for AArch64,
tripping the BUG() in exception_target_el() during the next injection:
kernel BUG at arch/arm64/kvm/inject_fault.c:40!
Internal error: Oops - BUG: 00000000f2000800 [#1] SMP
CPU: 3 UID: 0 PID: 318 Comm: repro Not tainted 6.17.0-rc4-00104-g10fd0285305d #6 PREEMPT
Hardware name: linux,dummy-virt (DT)
pstate: 21402009 (nzCv daif +PAN -UAO -TCO +DIT -SSBS BTYPE=--)
pc : exception_target_el+0x88/0x8c
lr : pend_serror_exception+0x18/0x13c
sp : ffff800082f03a10
x29: ffff800082f03a10 x28: ffff0000cb132280 x27: 0000000000000000
x26: 0000000000000000 x25: ffff0000c2a99c20 x24: 0000000000000000
x23: 0000000000008000 x22: 0000000000000002 x21: 0000000000000004
x20: 0000000000008000 x19: ffff0000c2a99c20 x18: 0000000000000000
x17: 0000000000000000 x16: 0000000000000000 x15: 00000000200000c0
x14: 0000000000000000 x13: 0000000000000000 x12: 0000000000000000
x11: 0000000000000000 x10: 0000000000000000 x9 : 0000000000000000
x8 : ffff800082f03af8 x7 : 0000000000000000 x6 : 0000000000000000
x5 : ffff800080f621f0 x4 : 0000000000000000 x3 : 0000000000000000
x2 : 000000000040009b x1 : 0000000000000003 x0 : ffff0000c2a99c20
Call trace:
exception_target_el+0x88/0x8c (P)
kvm_inject_serror_esr+0x40/0x3b4
__kvm_arm_vcpu_set_events+0xf0/0x100
kvm_arch_vcpu_ioctl+0x180/0x9d4
kvm_vcpu_ioctl+0x60c/0x9f4
__arm64_sys_ioctl+0xac/0x104
invoke_syscall+0x48/0x110
el0_svc_common.constprop.0+0x40/0xe0
do_el0_svc+0x1c/0x28
el0_svc+0x34/0xf0
el0t_64_sync_handler+0xa0/0xe4
el0t_64_sync+0x198/0x19c
Code: f946bc01 b4fffe61 9101e020 17fffff2 (d4210000)
Reject the ioctls outright as no sane VMM would call these before
KVM_ARM_VCPU_INIT anyway. Even if it did the exception would've been
thrown away by the eventual reset of the vCPU's state.
Cc: stable(a)vger.kernel.org # 6.17
Fixes: b7b27facc7b5 ("arm/arm64: KVM: Add KVM_GET/SET_VCPU_EVENTS")
Signed-off-by: Oliver Upton <oliver.upton(a)linux.dev>
Signed-off-by: Marc Zyngier <maz(a)kernel.org>
diff --git a/arch/arm64/kvm/arm.c b/arch/arm64/kvm/arm.c
index f21d1b7f20f8..f01cacb669cf 100644
--- a/arch/arm64/kvm/arm.c
+++ b/arch/arm64/kvm/arm.c
@@ -1794,6 +1794,9 @@ long kvm_arch_vcpu_ioctl(struct file *filp,
case KVM_GET_VCPU_EVENTS: {
struct kvm_vcpu_events events;
+ if (!kvm_vcpu_initialized(vcpu))
+ return -ENOEXEC;
+
if (kvm_arm_vcpu_get_events(vcpu, &events))
return -EINVAL;
@@ -1805,6 +1808,9 @@ long kvm_arch_vcpu_ioctl(struct file *filp,
case KVM_SET_VCPU_EVENTS: {
struct kvm_vcpu_events events;
+ if (!kvm_vcpu_initialized(vcpu))
+ return -ENOEXEC;
+
if (copy_from_user(&events, argp, sizeof(events)))
return -EFAULT;
Hi,
Changes since v1:
- SHAs for Fixes tag corrected (sorry)
The size of the DSP host buffer was incorrectly defined as 2ms while
it is 4ms and the ChainDMA PCMs are using 5ms as host facing buffer.
The constraint will be set against the period time rather than the buffer
time to make sure that application will not face with xruns when the
DMA bursts to refill the host buffer.
The minimal period size will be also used by Pipewire in case of SOF
cards to set the headroom to a length which will avoid the cases when
the hw_ptr jumps over the appl_ptr because of a burst.
Iow, it will make Pipewire to keep a safe distance from the hw_ptr.
https://github.com/thesofproject/linux/issues/5284https://gitlab.freedesktop.org/pipewire/wireplumber/-/merge_requests/740https://gitlab.freedesktop.org/pipewire/pipewire/-/merge_requests/2548
Regards,
Peter
---
Peter Ujfalusi (3):
ASoC: SOF: ipc4-topology: Correct the minimum host DMA buffer size
ASoC: SOF: ipc4-topology: Account for different ChainDMA host buffer
size
ASoC: SOF: Intel: hda-pcm: Place the constraint on period time instead
of buffer time
sound/soc/sof/intel/hda-pcm.c | 29 +++++++++++++++++++++--------
sound/soc/sof/ipc4-topology.c | 9 +++++++--
sound/soc/sof/ipc4-topology.h | 7 +++++--
3 files changed, 33 insertions(+), 12 deletions(-)
--
2.51.0
From: Ian Abbott <abbotti(a)mev.co.uk>
commit 7afba9221f70d4cbce0f417c558879cba0eb5e66 upstream.
The `insn_rw_emulate_bits()` function is used as a default handler for
`INSN_READ` instructions for subdevices that have a handler for
`INSN_BITS` but not for `INSN_READ`. Similarly, it is used as a default
handler for `INSN_WRITE` instructions for subdevices that have a handler
for `INSN_BITS` but not for `INSN_WRITE`. It works by emulating the
`INSN_READ` or `INSN_WRITE` instruction handling with a constructed
`INSN_BITS` instruction. However, `INSN_READ` and `INSN_WRITE`
instructions are supposed to be able read or write multiple samples,
indicated by the `insn->n` value, but `insn_rw_emulate_bits()` currently
only handles a single sample. For `INSN_READ`, the comedi core will
copy `insn->n` samples back to user-space. (That triggered KASAN
kernel-infoleak errors when `insn->n` was greater than 1, but that is
being fixed more generally elsewhere in the comedi core.)
Make `insn_rw_emulate_bits()` either handle `insn->n` samples, or return
an error, to conform to the general expectation for `INSN_READ` and
`INSN_WRITE` handlers.
Fixes: ed9eccbe8970 ("Staging: add comedi core")
Cc: stable <stable(a)kernel.org> # 5.13+
Signed-off-by: Ian Abbott <abbotti(a)mev.co.uk>
Link: https://lore.kernel.org/r/20250725141034.87297-1-abbotti@mev.co.uk
Signed-off-by: Greg Kroah-Hartman <gregkh(a)linuxfoundation.org>
[Andrey Troshin: backport fix from drivers/comedi/drivers.c to drivers/staging/comedi/drivers.c.]
Signed-off-by: Andrey Troshin <drtrosh(a)yandex-team.ru>
---
Backport fix for CVE-2025-39686
Link: https://nvd.nist.gov/vuln/detail/CVE-2025-39686
---
drivers/staging/comedi/drivers.c | 23 ++++++++++++-----------
1 file changed, 12 insertions(+), 11 deletions(-)
diff --git a/drivers/staging/comedi/drivers.c b/drivers/staging/comedi/drivers.c
index fd098e62a308..816225d1e1a4 100644
--- a/drivers/staging/comedi/drivers.c
+++ b/drivers/staging/comedi/drivers.c
@@ -620,11 +620,9 @@ static int insn_rw_emulate_bits(struct comedi_device *dev,
unsigned int chan = CR_CHAN(insn->chanspec);
unsigned int base_chan = (chan < 32) ? 0 : chan;
unsigned int _data[2];
+ unsigned int i;
int ret;
- if (insn->n == 0)
- return 0;
-
memset(_data, 0, sizeof(_data));
memset(&_insn, 0, sizeof(_insn));
_insn.insn = INSN_BITS;
@@ -635,18 +633,21 @@ static int insn_rw_emulate_bits(struct comedi_device *dev,
if (insn->insn == INSN_WRITE) {
if (!(s->subdev_flags & SDF_WRITABLE))
return -EINVAL;
- _data[0] = 1U << (chan - base_chan); /* mask */
- _data[1] = data[0] ? (1U << (chan - base_chan)) : 0; /* bits */
+ _data[0] = 1U << (chan - base_chan); /* mask */
}
+ for (i = 0; i < insn->n; i++) {
+ if (insn->insn == INSN_WRITE)
+ _data[1] = data[i] ? _data[0] : 0; /* bits */
- ret = s->insn_bits(dev, s, &_insn, _data);
- if (ret < 0)
- return ret;
+ ret = s->insn_bits(dev, s, &_insn, _data);
+ if (ret < 0)
+ return ret;
- if (insn->insn == INSN_READ)
- data[0] = (_data[1] >> (chan - base_chan)) & 1;
+ if (insn->insn == INSN_READ)
+ data[i] = (_data[1] >> (chan - base_chan)) & 1;
+ }
- return 1;
+ return insn->n;
}
static int __comedi_device_postconfig_async(struct comedi_device *dev,
--
2.34.1
Make sure to drop the reference taken to the iommu platform device when
looking up its driver data during probe_device().
Note that commit 9826e393e4a8 ("iommu/tegra-smmu: Fix missing
put_device() call in tegra_smmu_find") fixed the leak in an error path,
but the reference is still leaking on success.
Fixes: 891846516317 ("memory: Add NVIDIA Tegra memory controller support")
Cc: stable(a)vger.kernel.org # 3.19: 9826e393e4a8
Cc: Miaoqian Lin <linmq006(a)gmail.com>
Acked-by: Robin Murphy <robin.murphy(a)arm.com>
Acked-by: Thierry Reding <treding(a)nvidia.com>
Signed-off-by: Johan Hovold <johan(a)kernel.org>
---
drivers/iommu/tegra-smmu.c | 5 ++---
1 file changed, 2 insertions(+), 3 deletions(-)
diff --git a/drivers/iommu/tegra-smmu.c b/drivers/iommu/tegra-smmu.c
index 36cdd5fbab07..f6f26a072820 100644
--- a/drivers/iommu/tegra-smmu.c
+++ b/drivers/iommu/tegra-smmu.c
@@ -830,10 +830,9 @@ static struct tegra_smmu *tegra_smmu_find(struct device_node *np)
return NULL;
mc = platform_get_drvdata(pdev);
- if (!mc) {
- put_device(&pdev->dev);
+ put_device(&pdev->dev);
+ if (!mc)
return NULL;
- }
return mc->smmu;
}
--
2.49.1
Make sure to drop the references taken to the iommu platform devices
when looking up their driver data during probe_device().
Note that the arch data device pointer added by commit 604629bcb505
("iommu/omap: add support for late attachment of iommu devices") has
never been used. Remove it to underline that the references are not
needed.
Fixes: 9d5018deec86 ("iommu/omap: Add support to program multiple iommus")
Fixes: 7d6827748d54 ("iommu/omap: Fix iommu archdata name for DT-based devices")
Cc: stable(a)vger.kernel.org # 3.18
Cc: Suman Anna <s-anna(a)ti.com>
Acked-by: Robin Murphy <robin.murphy(a)arm.com>
Signed-off-by: Johan Hovold <johan(a)kernel.org>
---
drivers/iommu/omap-iommu.c | 2 +-
drivers/iommu/omap-iommu.h | 2 --
2 files changed, 1 insertion(+), 3 deletions(-)
diff --git a/drivers/iommu/omap-iommu.c b/drivers/iommu/omap-iommu.c
index 5c6f5943f44b..c0315c86cd18 100644
--- a/drivers/iommu/omap-iommu.c
+++ b/drivers/iommu/omap-iommu.c
@@ -1675,6 +1675,7 @@ static struct iommu_device *omap_iommu_probe_device(struct device *dev)
}
oiommu = platform_get_drvdata(pdev);
+ put_device(&pdev->dev);
if (!oiommu) {
of_node_put(np);
kfree(arch_data);
@@ -1682,7 +1683,6 @@ static struct iommu_device *omap_iommu_probe_device(struct device *dev)
}
tmp->iommu_dev = oiommu;
- tmp->dev = &pdev->dev;
of_node_put(np);
}
diff --git a/drivers/iommu/omap-iommu.h b/drivers/iommu/omap-iommu.h
index 27697109ec79..50b39be61abc 100644
--- a/drivers/iommu/omap-iommu.h
+++ b/drivers/iommu/omap-iommu.h
@@ -88,7 +88,6 @@ struct omap_iommu {
/**
* struct omap_iommu_arch_data - omap iommu private data
* @iommu_dev: handle of the OMAP iommu device
- * @dev: handle of the iommu device
*
* This is an omap iommu private data object, which binds an iommu user
* to its iommu device. This object should be placed at the iommu user's
@@ -97,7 +96,6 @@ struct omap_iommu {
*/
struct omap_iommu_arch_data {
struct omap_iommu *iommu_dev;
- struct device *dev;
};
struct cr_regs {
--
2.49.1
Make sure to drop the reference taken to the iommu platform device when
looking up its driver data during of_xlate().
Fixes: 7b2d59611fef ("iommu/ipmmu-vmsa: Replace local utlb code with fwspec ids")
Cc: stable(a)vger.kernel.org # 4.14
Cc: Magnus Damm <damm+renesas(a)opensource.se>
Acked-by: Robin Murphy <robin.murphy(a)arm.com>
Signed-off-by: Johan Hovold <johan(a)kernel.org>
---
drivers/iommu/ipmmu-vmsa.c | 2 ++
1 file changed, 2 insertions(+)
diff --git a/drivers/iommu/ipmmu-vmsa.c b/drivers/iommu/ipmmu-vmsa.c
index ffa892f65714..02a2a55ffa0a 100644
--- a/drivers/iommu/ipmmu-vmsa.c
+++ b/drivers/iommu/ipmmu-vmsa.c
@@ -720,6 +720,8 @@ static int ipmmu_init_platform_device(struct device *dev,
dev_iommu_priv_set(dev, platform_get_drvdata(ipmmu_pdev));
+ put_device(&ipmmu_pdev->dev);
+
return 0;
}
--
2.49.1
Make sure to drop the reference taken to the iommu platform device when
looking up its driver data during of_xlate().
Note that commit 1a26044954a6 ("iommu/exynos: add missing put_device()
call in exynos_iommu_of_xlate()") fixed the leak in a couple of error
paths, but the reference is still leaking on success.
Fixes: aa759fd376fb ("iommu/exynos: Add callback for initializing devices from device tree")
Cc: stable(a)vger.kernel.org # 4.2: 1a26044954a6
Cc: Yu Kuai <yukuai3(a)huawei.com>
Acked-by: Robin Murphy <robin.murphy(a)arm.com>
Acked-by: Marek Szyprowski <m.szyprowski(a)samsung.com>
Signed-off-by: Johan Hovold <johan(a)kernel.org>
---
drivers/iommu/exynos-iommu.c | 9 +++------
1 file changed, 3 insertions(+), 6 deletions(-)
diff --git a/drivers/iommu/exynos-iommu.c b/drivers/iommu/exynos-iommu.c
index b6edd178fe25..ce9e935cb84c 100644
--- a/drivers/iommu/exynos-iommu.c
+++ b/drivers/iommu/exynos-iommu.c
@@ -1446,17 +1446,14 @@ static int exynos_iommu_of_xlate(struct device *dev,
return -ENODEV;
data = platform_get_drvdata(sysmmu);
- if (!data) {
- put_device(&sysmmu->dev);
+ put_device(&sysmmu->dev);
+ if (!data)
return -ENODEV;
- }
if (!owner) {
owner = kzalloc(sizeof(*owner), GFP_KERNEL);
- if (!owner) {
- put_device(&sysmmu->dev);
+ if (!owner)
return -ENOMEM;
- }
INIT_LIST_HEAD(&owner->controllers);
mutex_init(&owner->rpm_lock);
--
2.49.1
Make sure to drop the reference taken to the iommu platform device when
looking up its driver data during of_xlate().
Note that commit e2eae09939a8 ("iommu/qcom: add missing put_device()
call in qcom_iommu_of_xlate()") fixed the leak in a couple of error
paths, but the reference is still leaking on success and late failures.
Fixes: 0ae349a0f33f ("iommu/qcom: Add qcom_iommu")
Cc: stable(a)vger.kernel.org # 4.14: e2eae09939a8
Cc: Rob Clark <robin.clark(a)oss.qualcomm.com>
Cc: Yu Kuai <yukuai3(a)huawei.com>
Acked-by: Robin Murphy <robin.murphy(a)arm.com>
Signed-off-by: Johan Hovold <johan(a)kernel.org>
---
drivers/iommu/arm/arm-smmu/qcom_iommu.c | 10 ++++------
1 file changed, 4 insertions(+), 6 deletions(-)
diff --git a/drivers/iommu/arm/arm-smmu/qcom_iommu.c b/drivers/iommu/arm/arm-smmu/qcom_iommu.c
index c5be95e56031..9c1166a3af6c 100644
--- a/drivers/iommu/arm/arm-smmu/qcom_iommu.c
+++ b/drivers/iommu/arm/arm-smmu/qcom_iommu.c
@@ -565,14 +565,14 @@ static int qcom_iommu_of_xlate(struct device *dev,
qcom_iommu = platform_get_drvdata(iommu_pdev);
+ put_device(&iommu_pdev->dev);
+
/* make sure the asid specified in dt is valid, so we don't have
* to sanity check this elsewhere:
*/
if (WARN_ON(asid > qcom_iommu->max_asid) ||
- WARN_ON(qcom_iommu->ctxs[asid] == NULL)) {
- put_device(&iommu_pdev->dev);
+ WARN_ON(qcom_iommu->ctxs[asid] == NULL))
return -EINVAL;
- }
if (!dev_iommu_priv_get(dev)) {
dev_iommu_priv_set(dev, qcom_iommu);
@@ -581,10 +581,8 @@ static int qcom_iommu_of_xlate(struct device *dev,
* multiple different iommu devices. Multiple context
* banks are ok, but multiple devices are not:
*/
- if (WARN_ON(qcom_iommu != dev_iommu_priv_get(dev))) {
- put_device(&iommu_pdev->dev);
+ if (WARN_ON(qcom_iommu != dev_iommu_priv_get(dev)))
return -EINVAL;
- }
}
return iommu_fwspec_add_ids(dev, &asid, 1);
--
2.49.1
Make sure to drop the reference taken to the iommu platform device when
looking up its driver data during of_xlate().
Fixes: 46d1fb072e76 ("iommu/dart: Add DART iommu driver")
Cc: stable(a)vger.kernel.org # 5.15
Cc: Sven Peter <sven(a)kernel.org>
Acked-by: Robin Murphy <robin.murphy(a)arm.com>
Signed-off-by: Johan Hovold <johan(a)kernel.org>
---
drivers/iommu/apple-dart.c | 2 ++
1 file changed, 2 insertions(+)
diff --git a/drivers/iommu/apple-dart.c b/drivers/iommu/apple-dart.c
index 95a4e62b8f63..9804022c7f59 100644
--- a/drivers/iommu/apple-dart.c
+++ b/drivers/iommu/apple-dart.c
@@ -802,6 +802,8 @@ static int apple_dart_of_xlate(struct device *dev,
struct apple_dart *cfg_dart;
int i, sid;
+ put_device(&iommu_pdev->dev);
+
if (args->args_count != 1)
return -EINVAL;
sid = args->args[0];
--
2.49.1
Greetings,
I hope this email finds you well.
I am Mrs. Diana Owen contacting you from Reality Trading Group Ltd India.
.
As a new growing company, we are looking for reliable company of your product as seen in your website for urgent purchase order basis.
Could you please give me more details and specification of your products.
We also need your products catalog, MOQ, Production Lead Time and Unit price?
Best Regards,
Mrs. Diana Owen
Purchase Manager
Company: Reality Trading Group Ltd
Eric Biggers <ebiggers(a)kernel.org>:
> Now that the lower level __crc32c_le() library function is optimized for
This patch (i. e. 38a9a5121c3b ("lib/crc32: make crc32c() go directly to lib"))
solves actual bug I found in practice. So, please, backport it
to stable kernels.
I did bisect.
It is possible to apply this patch on top of v6.12.48 without conflicts.
The bug actually prevents me for using my system (more details below).
Here is steps to reproduce bug I noticed.
Build kernel so:
$ cat /tmp/mini
CONFIG_64BIT=y
CONFIG_PRINTK=y
CONFIG_SERIAL_8250=y
CONFIG_TTY=y
CONFIG_SERIAL_8250_CONSOLE=y
CONFIG_BLK_DEV_INITRD=y
CONFIG_RD_GZIP=y
CONFIG_BINFMT_ELF=y
CONFIG_BINFMT_SCRIPT=y
CONFIG_PROC_FS=y
CONFIG_SYSFS=y
CONFIG_DEVTMPFS=y
CONFIG_MODULES=y
CONFIG_BTRFS_FS=m
CONFIG_MODULE_COMPRESS=y
CONFIG_MODULE_COMPRESS_XZ=y
CONFIG_MODULE_COMPRESS_ALL=y
CONFIG_MODULE_DECOMPRESS=y
CONFIG_PRINTK_TIME=y
$ make allnoconfig KCONFIG_ALLCONFIG=/tmp/mini
$ make
Then create initramfs, which contains statically built busybox
(I used busybox v1.37.0 (Debian 1:1.37.0-6+b3)) and modules we just created.
Then run Qemu using command line similar to this:
qemu-system-x86_64 -kernel arch/x86/boot/bzImage -initrd i.gz -append 'console=ttyS0 panic=1 rdinit=/bin/busybox sh' -m 256 -no-reboot -enable-kvm -serial stdio -display none
Then in busybox shell type this:
# mkdir /proc
# busybox mount -t proc proc /proc
# modprobe btrfs
On buggy kernels I get this output:
# modprobe btrfs
[ 19.614228] raid6: skipped pq benchmark and selected sse2x4
[ 19.614638] raid6: using intx1 recovery algorithm
[ 19.616569] xor: measuring software checksum speed
[ 19.616937] prefetch64-sse : 42616 MB/sec
[ 19.617270] generic_sse : 41320 MB/sec
[ 19.617531] xor: using function: prefetch64-sse (42616 MB/sec)
[ 19.619731] Invalid ELF header magic: != ELF
modprobe: can't load module libcrc32c (kernel/lib/libcrc32c.ko.xz): unknown symbol in module, or unknown parameter
The bug is reproducible on all kernels from v6.12 until this commit.
And it is not reproducible on all kernels, which contain this commit.
I found this using bisect.
This bug actually breaks my workflow. I have btrfs as root filesystem.
Initramfs, generated by Debian, doesn't suit my needs. So I'm going
to create my own initramfs from scratch. (Note that I use Debian Trixie,
which has v6.12.48 kernel.) During testing this initramfs in Qemu
I noticed that command "modprobe btrfs" fails with error given above.
(I not yet tried to test this initramfs on real hardware.)
So, this bug actually breaks my workflow.
So, please backport this patch (i. e. 38a9a5121c3b ("lib/crc32: make crc32c() go directly to lib"))
to stable kernels.
I tested that this patch can be applied without conflicts on top of v6.12.48,
and this patch indeed fixes the bug for v6.12.48.
If you want, I can give more info.
It is possible that this is in fact bug in busybox, not in Linux.
But still I think that backporting this patch is good idea.
This busybox thread my be related:
https://lists.busybox.net/pipermail/busybox/2023-May/090309.html
--
Askar Safin
This series backports 27 patches to update minmax.h in the 5.10.y
branch, aligning it with v6.17-rc7.
The ultimate goal is to synchronize all long-term branches so that they
include the full set of minmax.h changes.
- 6.12.y has already been backported; the changes are included in
v6.12.49.
- 6.6.y has already been backported; the changes are included in
v6.6.109.
- 6.1.y has already been backported; the changes are currently in the
6.1-stable tree.
- 5.15.y has already been backported; the changes are currently in the
5.15-stable tree.
The key motivation is to bring in commit d03eba99f5bf ("minmax: allow
min()/max()/clamp() if the arguments have the same signedness"), which
is missing in kernel 5.10.y.
In mainline, this change enables min()/max()/clamp() to accept mixed
argument types, provided both have the same signedness. Without it,
backported patches that use these forms may trigger compiler warnings,
which escalate to build failures when -Werror is enabled.
The first two patches in this series were added to prevent build
failures caused by changes introduced later in minmax.h.
- Commit 92d23c6e9415 ("overflow, tracing: Define the is_signed_type()
macro once") is needed for commit 75ca38c1960f ("minmax: allow
min()/max()/clamp()").
- Commit cea628008fc8 ("btrfs: remove duplicated in_range() macro") is
needed for commit f9bff0e31881 ("minmax: add in_range() macro").
The changes were tested using `make allyesconfig` and
`make allmodconfig` for arm64, arm, x86_64 and i386 architectures.
Changes in v2:
The series was updated after initially backporting and approving the
newer long-term branches.
Andy Shevchenko (2):
minmax: deduplicate __unconst_integer_typeof()
minmax: fix header inclusions
Bart Van Assche (1):
overflow, tracing: Define the is_signed_type() macro once
David Laight (11):
minmax: allow min()/max()/clamp() if the arguments have the same
signedness.
minmax: fix indentation of __cmp_once() and __clamp_once()
minmax: allow comparisons of 'int' against 'unsigned char/short'
minmax: relax check to allow comparison between unsigned arguments and
signed constants
minmax.h: add whitespace around operators and after commas
minmax.h: update some comments
minmax.h: reduce the #define expansion of min(), max() and clamp()
minmax.h: use BUILD_BUG_ON_MSG() for the lo < hi test in clamp()
minmax.h: move all the clamp() definitions after the min/max() ones
minmax.h: simplify the variants of clamp()
minmax.h: remove some #defines that are only expanded once
Herve Codina (1):
minmax: Introduce {min,max}_array()
Jason A. Donenfeld (2):
minmax: sanity check constant bounds when clamping
minmax: clamp more efficiently by avoiding extra comparison
Johannes Thumshirn (1):
btrfs: remove duplicated in_range() macro
Linus Torvalds (8):
minmax: avoid overly complicated constant expressions in VM code
minmax: add a few more MIN_T/MAX_T users
minmax: simplify and clarify min_t()/max_t() implementation
minmax: make generic MIN() and MAX() macros available everywhere
minmax: don't use max() in situations that want a C constant
expression
minmax: simplify min()/max()/clamp() implementation
minmax: improve macro expansion and type checking
minmax: fix up min3() and max3() too
Matthew Wilcox (Oracle) (1):
minmax: add in_range() macro
arch/arm/mm/pageattr.c | 6 +-
arch/um/drivers/mconsole_user.c | 2 +
arch/x86/mm/pgtable.c | 2 +-
drivers/edac/sb_edac.c | 4 +-
drivers/edac/skx_common.h | 1 -
.../drm/amd/display/modules/hdcp/hdcp_ddc.c | 2 +
.../drm/amd/pm/powerplay/hwmgr/ppevvmath.h | 14 +-
.../drm/arm/display/include/malidp_utils.h | 2 +-
.../display/komeda/komeda_pipeline_state.c | 24 +-
drivers/gpu/drm/drm_color_mgmt.c | 2 +-
drivers/gpu/drm/msm/adreno/a6xx_gmu.c | 6 -
drivers/gpu/drm/radeon/evergreen_cs.c | 2 +
drivers/hwmon/adt7475.c | 24 +-
drivers/input/touchscreen/cyttsp4_core.c | 2 +-
drivers/md/dm-integrity.c | 6 +-
drivers/media/dvb-frontends/stv0367_priv.h | 3 +
.../net/ethernet/chelsio/cxgb3/cxgb3_main.c | 18 +-
.../net/ethernet/stmicro/stmmac/stmmac_main.c | 2 +-
drivers/net/fjes/fjes_main.c | 4 +-
drivers/nfc/pn544/i2c.c | 2 -
drivers/platform/x86/sony-laptop.c | 1 -
drivers/scsi/isci/init.c | 6 +-
.../pci/hive_isp_css_include/math_support.h | 5 -
fs/btrfs/ctree.h | 2 -
fs/btrfs/extent_io.c | 1 +
fs/btrfs/file-item.c | 1 +
fs/btrfs/misc.h | 2 -
fs/btrfs/raid56.c | 1 +
fs/btrfs/tree-checker.c | 2 +-
fs/erofs/zdata.h | 2 +-
fs/ext2/balloc.c | 2 -
fs/ext4/ext4.h | 2 -
fs/ufs/util.h | 6 -
include/linux/compiler.h | 15 +
include/linux/minmax.h | 267 ++++++++++++++----
include/linux/overflow.h | 1 -
include/linux/trace_events.h | 2 -
kernel/trace/preemptirq_delay_test.c | 2 -
lib/btree.c | 1 -
lib/decompress_unlzma.c | 2 +
lib/logic_pio.c | 3 -
lib/vsprintf.c | 2 +-
lib/zstd/zstd_internal.h | 2 -
mm/zsmalloc.c | 1 -
net/ipv4/proc.c | 2 +-
net/ipv6/proc.c | 2 +-
net/netfilter/nf_nat_core.c | 6 +-
net/tipc/core.h | 2 +-
net/tipc/link.c | 10 +-
49 files changed, 312 insertions(+), 169 deletions(-)
--
2.47.3
The patch below does not apply to the 6.17-stable tree.
If someone wants it applied there, or to any other stable or longterm
tree, then please email the backport, including the original git commit
id to <stable(a)vger.kernel.org>.
To reproduce the conflict and resubmit, you may use the following commands:
git fetch https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git/ linux-6.17.y
git checkout FETCH_HEAD
git cherry-pick -x 668208b161a0b679427e7d0f34c0a65fd7d23979
# <resolve conflicts, build, test, etc.>
git commit -s
git send-email --to '<stable(a)vger.kernel.org>' --in-reply-to '2025101914-dodge-paprika-36e0@gregkh' --subject-prefix 'PATCH 6.17.y' HEAD^..
Possible dependencies:
thanks,
greg k-h
------------------ original commit in Linus's tree ------------------
From 668208b161a0b679427e7d0f34c0a65fd7d23979 Mon Sep 17 00:00:00 2001
From: Alexandre Ghiti <alexghiti(a)rivosinc.com>
Date: Thu, 14 Aug 2025 12:06:14 +0000
Subject: [PATCH] riscv: use an atomic xchg in pudp_huge_get_and_clear()
Make sure we return the right pud value and not a value that could have
been overwritten in between by a different core.
Link: https://lkml.kernel.org/r/20250814-dev-alex-thp_pud_xchg-v1-1-b4704dfae206@…
Fixes: c3cc2a4a3a23 ("riscv: Add support for PUD THP")
Signed-off-by: Alexandre Ghiti <alexghiti(a)rivosinc.com>
Cc: Andrew Donnellan <ajd(a)linux.ibm.com>
Cc: <stable(a)vger.kernel.org>
Signed-off-by: Andrew Morton <akpm(a)linux-foundation.org>
diff --git a/arch/riscv/include/asm/pgtable.h b/arch/riscv/include/asm/pgtable.h
index 91697fbf1f90..e69346307e78 100644
--- a/arch/riscv/include/asm/pgtable.h
+++ b/arch/riscv/include/asm/pgtable.h
@@ -942,6 +942,17 @@ static inline int pudp_test_and_clear_young(struct vm_area_struct *vma,
return ptep_test_and_clear_young(vma, address, (pte_t *)pudp);
}
+#define __HAVE_ARCH_PUDP_HUGE_GET_AND_CLEAR
+static inline pud_t pudp_huge_get_and_clear(struct mm_struct *mm,
+ unsigned long address, pud_t *pudp)
+{
+ pud_t pud = __pud(atomic_long_xchg((atomic_long_t *)pudp, 0));
+
+ page_table_check_pud_clear(mm, pud);
+
+ return pud;
+}
+
static inline int pud_young(pud_t pud)
{
return pte_young(pud_pte(pud));
Check the return value of reset_control_deassert() in the probe
function to prevent continuing probe when reset deassertion fails.
Previously, reset_control_deassert() was called without checking its
return value, which could lead to probe continuing even when the
device reset wasn't properly deasserted.
The fix checks the return value and returns an error with dev_err_probe()
if reset deassertion fails, providing better error handling and
diagnostics.
Fixes: acbdad8dd1ab ("serial: 8250_dw: simplify optional reset handling")
Cc: stable(a)vger.kernel.org
Signed-off-by: Artem Shimko <a.shimko.dev(a)gmail.com>
---
Hi,
Done.
Thank you!
Best regards,
Artem Shimko
ChangeLog:
v1:
* https://lore.kernel.org/all/20251009081309.2021600-1-a.shimko.dev@gmail.com…
v2:
* https://lore.kernel.org/all/20251019085325.250657-1-a.shimko.dev@gmail.com/
v3:
* Add Cc: stable(a)vger.kernel.org
drivers/tty/serial/8250/8250_dw.c | 4 +++-
1 file changed, 3 insertions(+), 1 deletion(-)
diff --git a/drivers/tty/serial/8250/8250_dw.c b/drivers/tty/serial/8250/8250_dw.c
index a53ba04d9770..710ae4d40aec 100644
--- a/drivers/tty/serial/8250/8250_dw.c
+++ b/drivers/tty/serial/8250/8250_dw.c
@@ -635,7 +635,9 @@ static int dw8250_probe(struct platform_device *pdev)
if (IS_ERR(data->rst))
return PTR_ERR(data->rst);
- reset_control_deassert(data->rst);
+ err = reset_control_deassert(data->rst);
+ if (err)
+ return dev_err_probe(dev, err, "failed to deassert resets\n");
err = devm_add_action_or_reset(dev, dw8250_reset_control_assert, data->rst);
if (err)
--
2.43.0
From: Benjamin Berg <benjamin.berg(a)intel.com>
The normal timer mechanism assume that timeout further in the future
need a lower accuracy. As an example, the granularity for a timer
scheduled 4096 ms in the future on a 1000 Hz system is already 512 ms.
This granularity is perfectly sufficient for e.g. timeouts, but there
are other types of events that will happen at a future point in time and
require a higher accuracy.
Add a new wiphy_hrtimer_work type that uses an hrtimer internally. The
API is almost identical to the existing wiphy_delayed_work and it can be
used as a drop-in replacement after minor adjustments. The work will be
scheduled relative to the current time with a slack of 1 millisecond.
CC: stable(a)vger.kernel.org # 6.4+
Signed-off-by: Benjamin Berg <benjamin.berg(a)intel.com>
Reviewed-by: Johannes Berg <johannes.berg(a)intel.com>
Signed-off-by: Miri Korenblit <miriam.rachel.korenblit(a)intel.com>
---
include/net/cfg80211.h | 78 ++++++++++++++++++++++++++++++++++++++++++
net/wireless/core.c | 56 ++++++++++++++++++++++++++++++
net/wireless/trace.h | 21 ++++++++++++
3 files changed, 155 insertions(+)
diff --git a/include/net/cfg80211.h b/include/net/cfg80211.h
index 781624f5913a..47c9e4981915 100644
--- a/include/net/cfg80211.h
+++ b/include/net/cfg80211.h
@@ -6435,6 +6435,11 @@ static inline void wiphy_delayed_work_init(struct wiphy_delayed_work *dwork,
* after wiphy_lock() was called. Therefore, wiphy_cancel_work() can
* use just cancel_work() instead of cancel_work_sync(), it requires
* being in a section protected by wiphy_lock().
+ *
+ * Note that these are scheduled with a timer where the accuracy
+ * becomes less the longer in the future the scheduled timer is. Use
+ * wiphy_hrtimer_work_queue() if the timer must be not be late by more
+ * than approximately 10 percent.
*/
void wiphy_delayed_work_queue(struct wiphy *wiphy,
struct wiphy_delayed_work *dwork,
@@ -6506,6 +6511,79 @@ void wiphy_delayed_work_flush(struct wiphy *wiphy,
bool wiphy_delayed_work_pending(struct wiphy *wiphy,
struct wiphy_delayed_work *dwork);
+struct wiphy_hrtimer_work {
+ struct wiphy_work work;
+ struct wiphy *wiphy;
+ struct hrtimer timer;
+};
+
+enum hrtimer_restart wiphy_hrtimer_work_timer(struct hrtimer *t);
+
+static inline void wiphy_hrtimer_work_init(struct wiphy_hrtimer_work *hrwork,
+ wiphy_work_func_t func)
+{
+ hrtimer_setup(&hrwork->timer, wiphy_hrtimer_work_timer,
+ CLOCK_BOOTTIME, HRTIMER_MODE_REL);
+ wiphy_work_init(&hrwork->work, func);
+}
+
+/**
+ * wiphy_hrtimer_work_queue - queue hrtimer work for the wiphy
+ * @wiphy: the wiphy to queue for
+ * @hrwork: the high resolution timer worker
+ * @delay: the delay given as a ktime_t
+ *
+ * Please refer to wiphy_delayed_work_queue(). The difference is that
+ * the hrtimer work uses a high resolution timer for scheduling. This
+ * may be needed if timeouts might be scheduled further in the future
+ * and the accuracy of the normal timer is not sufficient.
+ *
+ * Expect a delay of a few milliseconds as the timer is scheduled
+ * with some slack and some more time may pass between queueing the
+ * work and its start.
+ */
+void wiphy_hrtimer_work_queue(struct wiphy *wiphy,
+ struct wiphy_hrtimer_work *hrwork,
+ ktime_t delay);
+
+/**
+ * wiphy_hrtimer_work_cancel - cancel previously queued hrtimer work
+ * @wiphy: the wiphy, for debug purposes
+ * @hrwork: the hrtimer work to cancel
+ *
+ * Cancel the work *without* waiting for it, this assumes being
+ * called under the wiphy mutex acquired by wiphy_lock().
+ */
+void wiphy_hrtimer_work_cancel(struct wiphy *wiphy,
+ struct wiphy_hrtimer_work *hrtimer);
+
+/**
+ * wiphy_hrtimer_work_flush - flush previously queued hrtimer work
+ * @wiphy: the wiphy, for debug purposes
+ * @hrwork: the hrtimer work to flush
+ *
+ * Flush the work (i.e. run it if pending). This must be called
+ * under the wiphy mutex acquired by wiphy_lock().
+ */
+void wiphy_hrtimer_work_flush(struct wiphy *wiphy,
+ struct wiphy_hrtimer_work *hrwork);
+
+/**
+ * wiphy_hrtimer_work_pending - Find out whether a wiphy hrtimer
+ * work item is currently pending.
+ *
+ * @wiphy: the wiphy, for debug purposes
+ * @hrwork: the hrtimer work in question
+ *
+ * Return: true if timer is pending, false otherwise
+ *
+ * Please refer to the wiphy_delayed_work_pending() documentation as
+ * this is the equivalent function for hrtimer based delayed work
+ * items.
+ */
+bool wiphy_hrtimer_work_pending(struct wiphy *wiphy,
+ struct wiphy_hrtimer_work *hrwork);
+
/**
* enum ieee80211_ap_reg_power - regulatory power for an Access Point
*
diff --git a/net/wireless/core.c b/net/wireless/core.c
index 797f9f2004a6..54a34d8d356e 100644
--- a/net/wireless/core.c
+++ b/net/wireless/core.c
@@ -1787,6 +1787,62 @@ bool wiphy_delayed_work_pending(struct wiphy *wiphy,
}
EXPORT_SYMBOL_GPL(wiphy_delayed_work_pending);
+enum hrtimer_restart wiphy_hrtimer_work_timer(struct hrtimer *t)
+{
+ struct wiphy_hrtimer_work *hrwork =
+ container_of(t, struct wiphy_hrtimer_work, timer);
+
+ wiphy_work_queue(hrwork->wiphy, &hrwork->work);
+
+ return HRTIMER_NORESTART;
+}
+EXPORT_SYMBOL_GPL(wiphy_hrtimer_work_timer);
+
+void wiphy_hrtimer_work_queue(struct wiphy *wiphy,
+ struct wiphy_hrtimer_work *hrwork,
+ ktime_t delay)
+{
+ trace_wiphy_hrtimer_work_queue(wiphy, &hrwork->work, delay);
+
+ if (!delay) {
+ hrtimer_cancel(&hrwork->timer);
+ wiphy_work_queue(wiphy, &hrwork->work);
+ return;
+ }
+
+ hrwork->wiphy = wiphy;
+ hrtimer_start_range_ns(&hrwork->timer, delay,
+ 1000 * NSEC_PER_USEC, HRTIMER_MODE_REL);
+}
+EXPORT_SYMBOL_GPL(wiphy_hrtimer_work_queue);
+
+void wiphy_hrtimer_work_cancel(struct wiphy *wiphy,
+ struct wiphy_hrtimer_work *hrwork)
+{
+ lockdep_assert_held(&wiphy->mtx);
+
+ hrtimer_cancel(&hrwork->timer);
+ wiphy_work_cancel(wiphy, &hrwork->work);
+}
+EXPORT_SYMBOL_GPL(wiphy_hrtimer_work_cancel);
+
+void wiphy_hrtimer_work_flush(struct wiphy *wiphy,
+ struct wiphy_hrtimer_work *hrwork)
+{
+ lockdep_assert_held(&wiphy->mtx);
+
+ hrtimer_cancel(&hrwork->timer);
+ wiphy_work_flush(wiphy, &hrwork->work);
+}
+EXPORT_SYMBOL_GPL(wiphy_hrtimer_work_flush);
+
+bool wiphy_hrtimer_work_pending(struct wiphy *wiphy,
+ struct wiphy_hrtimer_work *hrwork)
+{
+ return hrtimer_is_queued(&hrwork->timer);
+}
+EXPORT_SYMBOL_GPL(wiphy_hrtimer_work_pending);
+
static int __init cfg80211_init(void)
{
int err;
diff --git a/net/wireless/trace.h b/net/wireless/trace.h
index 8a4c34112eb5..2b71f1d867a0 100644
--- a/net/wireless/trace.h
+++ b/net/wireless/trace.h
@@ -304,6 +304,27 @@ TRACE_EVENT(wiphy_delayed_work_queue,
__entry->delay)
);
+TRACE_EVENT(wiphy_hrtimer_work_queue,
+ TP_PROTO(struct wiphy *wiphy, struct wiphy_work *work,
+ ktime_t delay),
+ TP_ARGS(wiphy, work, delay),
+ TP_STRUCT__entry(
+ WIPHY_ENTRY
+ __field(void *, instance)
+ __field(void *, func)
+ __field(ktime_t, delay)
+ ),
+ TP_fast_assign(
+ WIPHY_ASSIGN;
+ __entry->instance = work;
+ __entry->func = work->func;
+ __entry->delay = delay;
+ ),
+ TP_printk(WIPHY_PR_FMT " instance=%p func=%pS delay=%llu",
+ WIPHY_PR_ARG, __entry->instance, __entry->func,
+ __entry->delay)
+);
+
TRACE_EVENT(wiphy_work_worker_start,
TP_PROTO(struct wiphy *wiphy),
TP_ARGS(wiphy),
--
2.34.1
Hi,
I hope you're doing well.
We’re offering verified business contact data for the upcoming Fruit Attraction 2025 (FA), tailored for effective outreach after the event.
Place: Madrid, Spain
Date:SEP 30 - OCT 02, 2025
Contact Overview:
1,03,351Attendees
2,179Exhibiting Companies
6,537 Verified Exhibitor Contacts
Total: 109,885 Business Contacts
Each entry includes: Name, Job Title, Company, Website, Address, Phone, Official Email, LinkedIn Profile, and more.
Note: The counts given above are 100% GDPR complaints, with the rules and regulations.
Delivered within 48 hours – ready for your outreach, all at a minimal price.
If you'd like more details, just reply: “Send me pricing”
We’re offering 20% off right now! Reply with your choice from the options below to claim your discount.
• Full List – All attendees
• Targeted Segment – Filtered by location, job title, or industry
Best regards,
Audrey Roberts
Sr. Marketing Manager
To opt out reply “Not Interested.”
From: Benjamin Berg <benjamin.berg(a)intel.com>
The normal timer mechanism assume that timeout further in the future
need a lower accuracy. As an example, the granularity for a timer
scheduled 4096 ms in the future on a 1000 Hz system is already 512 ms.
This granularity is perfectly sufficient for e.g. timeouts, but there
are other types of events that will happen at a future point in time and
require a higher accuracy.
Add a new wiphy_hrtimer_work type that uses an hrtimer internally. The
API is almost identical to the existing wiphy_delayed_work and it can be
used as a drop-in replacement after minor adjustments. The work will be
scheduled relative to the current time with a slack of 1 millisecond.
CC: stable(a)vger.kernel.org # 6.4+
Signed-off-by: Benjamin Berg <benjamin.berg(a)intel.com>
Reviewed-by: Johannes Berg <johannes.berg(a)intel.com>
Signed-off-by: Miri Korenblit <miriam.rachel.korenblit(a)intel.com>
---
include/net/cfg80211.h | 78 ++++++++++++++++++++++++++++++++++++++++++
net/wireless/core.c | 56 ++++++++++++++++++++++++++++++
net/wireless/trace.h | 21 ++++++++++++
3 files changed, 155 insertions(+)
diff --git a/include/net/cfg80211.h b/include/net/cfg80211.h
index 781624f5913a..47c9e4981915 100644
--- a/include/net/cfg80211.h
+++ b/include/net/cfg80211.h
@@ -6435,6 +6435,11 @@ static inline void wiphy_delayed_work_init(struct wiphy_delayed_work *dwork,
* after wiphy_lock() was called. Therefore, wiphy_cancel_work() can
* use just cancel_work() instead of cancel_work_sync(), it requires
* being in a section protected by wiphy_lock().
+ *
+ * Note that these are scheduled with a timer where the accuracy
+ * becomes less the longer in the future the scheduled timer is. Use
+ * wiphy_hrtimer_work_queue() if the timer must be not be late by more
+ * than approximately 10 percent.
*/
void wiphy_delayed_work_queue(struct wiphy *wiphy,
struct wiphy_delayed_work *dwork,
@@ -6506,6 +6511,79 @@ void wiphy_delayed_work_flush(struct wiphy *wiphy,
bool wiphy_delayed_work_pending(struct wiphy *wiphy,
struct wiphy_delayed_work *dwork);
+struct wiphy_hrtimer_work {
+ struct wiphy_work work;
+ struct wiphy *wiphy;
+ struct hrtimer timer;
+};
+
+enum hrtimer_restart wiphy_hrtimer_work_timer(struct hrtimer *t);
+
+static inline void wiphy_hrtimer_work_init(struct wiphy_hrtimer_work *hrwork,
+ wiphy_work_func_t func)
+{
+ hrtimer_setup(&hrwork->timer, wiphy_hrtimer_work_timer,
+ CLOCK_BOOTTIME, HRTIMER_MODE_REL);
+ wiphy_work_init(&hrwork->work, func);
+}
+
+/**
+ * wiphy_hrtimer_work_queue - queue hrtimer work for the wiphy
+ * @wiphy: the wiphy to queue for
+ * @hrwork: the high resolution timer worker
+ * @delay: the delay given as a ktime_t
+ *
+ * Please refer to wiphy_delayed_work_queue(). The difference is that
+ * the hrtimer work uses a high resolution timer for scheduling. This
+ * may be needed if timeouts might be scheduled further in the future
+ * and the accuracy of the normal timer is not sufficient.
+ *
+ * Expect a delay of a few milliseconds as the timer is scheduled
+ * with some slack and some more time may pass between queueing the
+ * work and its start.
+ */
+void wiphy_hrtimer_work_queue(struct wiphy *wiphy,
+ struct wiphy_hrtimer_work *hrwork,
+ ktime_t delay);
+
+/**
+ * wiphy_hrtimer_work_cancel - cancel previously queued hrtimer work
+ * @wiphy: the wiphy, for debug purposes
+ * @hrwork: the hrtimer work to cancel
+ *
+ * Cancel the work *without* waiting for it, this assumes being
+ * called under the wiphy mutex acquired by wiphy_lock().
+ */
+void wiphy_hrtimer_work_cancel(struct wiphy *wiphy,
+ struct wiphy_hrtimer_work *hrtimer);
+
+/**
+ * wiphy_hrtimer_work_flush - flush previously queued hrtimer work
+ * @wiphy: the wiphy, for debug purposes
+ * @hrwork: the hrtimer work to flush
+ *
+ * Flush the work (i.e. run it if pending). This must be called
+ * under the wiphy mutex acquired by wiphy_lock().
+ */
+void wiphy_hrtimer_work_flush(struct wiphy *wiphy,
+ struct wiphy_hrtimer_work *hrwork);
+
+/**
+ * wiphy_hrtimer_work_pending - Find out whether a wiphy hrtimer
+ * work item is currently pending.
+ *
+ * @wiphy: the wiphy, for debug purposes
+ * @hrwork: the hrtimer work in question
+ *
+ * Return: true if timer is pending, false otherwise
+ *
+ * Please refer to the wiphy_delayed_work_pending() documentation as
+ * this is the equivalent function for hrtimer based delayed work
+ * items.
+ */
+bool wiphy_hrtimer_work_pending(struct wiphy *wiphy,
+ struct wiphy_hrtimer_work *hrwork);
+
/**
* enum ieee80211_ap_reg_power - regulatory power for an Access Point
*
diff --git a/net/wireless/core.c b/net/wireless/core.c
index 797f9f2004a6..54a34d8d356e 100644
--- a/net/wireless/core.c
+++ b/net/wireless/core.c
@@ -1787,6 +1787,62 @@ bool wiphy_delayed_work_pending(struct wiphy *wiphy,
}
EXPORT_SYMBOL_GPL(wiphy_delayed_work_pending);
+enum hrtimer_restart wiphy_hrtimer_work_timer(struct hrtimer *t)
+{
+ struct wiphy_hrtimer_work *hrwork =
+ container_of(t, struct wiphy_hrtimer_work, timer);
+
+ wiphy_work_queue(hrwork->wiphy, &hrwork->work);
+
+ return HRTIMER_NORESTART;
+}
+EXPORT_SYMBOL_GPL(wiphy_hrtimer_work_timer);
+
+void wiphy_hrtimer_work_queue(struct wiphy *wiphy,
+ struct wiphy_hrtimer_work *hrwork,
+ ktime_t delay)
+{
+ trace_wiphy_hrtimer_work_queue(wiphy, &hrwork->work, delay);
+
+ if (!delay) {
+ hrtimer_cancel(&hrwork->timer);
+ wiphy_work_queue(wiphy, &hrwork->work);
+ return;
+ }
+
+ hrwork->wiphy = wiphy;
+ hrtimer_start_range_ns(&hrwork->timer, delay,
+ 1000 * NSEC_PER_USEC, HRTIMER_MODE_REL);
+}
+EXPORT_SYMBOL_GPL(wiphy_hrtimer_work_queue);
+
+void wiphy_hrtimer_work_cancel(struct wiphy *wiphy,
+ struct wiphy_hrtimer_work *hrwork)
+{
+ lockdep_assert_held(&wiphy->mtx);
+
+ hrtimer_cancel(&hrwork->timer);
+ wiphy_work_cancel(wiphy, &hrwork->work);
+}
+EXPORT_SYMBOL_GPL(wiphy_hrtimer_work_cancel);
+
+void wiphy_hrtimer_work_flush(struct wiphy *wiphy,
+ struct wiphy_hrtimer_work *hrwork)
+{
+ lockdep_assert_held(&wiphy->mtx);
+
+ hrtimer_cancel(&hrwork->timer);
+ wiphy_work_flush(wiphy, &hrwork->work);
+}
+EXPORT_SYMBOL_GPL(wiphy_hrtimer_work_flush);
+
+bool wiphy_hrtimer_work_pending(struct wiphy *wiphy,
+ struct wiphy_hrtimer_work *hrwork)
+{
+ return hrtimer_is_queued(&hrwork->timer);
+}
+EXPORT_SYMBOL_GPL(wiphy_hrtimer_work_pending);
+
static int __init cfg80211_init(void)
{
int err;
diff --git a/net/wireless/trace.h b/net/wireless/trace.h
index 8a4c34112eb5..2b71f1d867a0 100644
--- a/net/wireless/trace.h
+++ b/net/wireless/trace.h
@@ -304,6 +304,27 @@ TRACE_EVENT(wiphy_delayed_work_queue,
__entry->delay)
);
+TRACE_EVENT(wiphy_hrtimer_work_queue,
+ TP_PROTO(struct wiphy *wiphy, struct wiphy_work *work,
+ ktime_t delay),
+ TP_ARGS(wiphy, work, delay),
+ TP_STRUCT__entry(
+ WIPHY_ENTRY
+ __field(void *, instance)
+ __field(void *, func)
+ __field(ktime_t, delay)
+ ),
+ TP_fast_assign(
+ WIPHY_ASSIGN;
+ __entry->instance = work;
+ __entry->func = work->func;
+ __entry->delay = delay;
+ ),
+ TP_printk(WIPHY_PR_FMT " instance=%p func=%pS delay=%llu",
+ WIPHY_PR_ARG, __entry->instance, __entry->func,
+ __entry->delay)
+);
+
TRACE_EVENT(wiphy_work_worker_start,
TP_PROTO(struct wiphy *wiphy),
TP_ARGS(wiphy),
--
2.34.1
The patch below does not apply to the 5.15-stable tree.
If someone wants it applied there, or to any other stable or longterm
tree, then please email the backport, including the original git commit
id to <stable(a)vger.kernel.org>.
To reproduce the conflict and resubmit, you may use the following commands:
git fetch https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git/ linux-5.15.y
git checkout FETCH_HEAD
git cherry-pick -x 21140e5caf019e4a24e1ceabcaaa16bd693b393f
# <resolve conflicts, build, test, etc.>
git commit -s
git send-email --to '<stable(a)vger.kernel.org>' --in-reply-to '2025101646-entitle-romp-923e@gregkh' --subject-prefix 'PATCH 5.15.y' HEAD^..
Possible dependencies:
thanks,
greg k-h
------------------ original commit in Linus's tree ------------------
From 21140e5caf019e4a24e1ceabcaaa16bd693b393f Mon Sep 17 00:00:00 2001
From: Thomas Fourier <fourier.thomas(a)gmail.com>
Date: Wed, 3 Sep 2025 10:06:46 +0200
Subject: [PATCH] crypto: rockchip - Fix dma_unmap_sg() nents value
The dma_unmap_sg() functions should be called with the same nents as the
dma_map_sg(), not the value the map function returned.
Fixes: 57d67c6e8219 ("crypto: rockchip - rework by using crypto_engine")
Cc: <stable(a)vger.kernel.org>
Signed-off-by: Thomas Fourier <fourier.thomas(a)gmail.com>
Signed-off-by: Herbert Xu <herbert(a)gondor.apana.org.au>
diff --git a/drivers/crypto/rockchip/rk3288_crypto_ahash.c b/drivers/crypto/rockchip/rk3288_crypto_ahash.c
index d6928ebe9526..b9f5a8b42e66 100644
--- a/drivers/crypto/rockchip/rk3288_crypto_ahash.c
+++ b/drivers/crypto/rockchip/rk3288_crypto_ahash.c
@@ -254,7 +254,7 @@ static void rk_hash_unprepare(struct crypto_engine *engine, void *breq)
struct rk_ahash_rctx *rctx = ahash_request_ctx(areq);
struct rk_crypto_info *rkc = rctx->dev;
- dma_unmap_sg(rkc->dev, areq->src, rctx->nrsg, DMA_TO_DEVICE);
+ dma_unmap_sg(rkc->dev, areq->src, sg_nents(areq->src), DMA_TO_DEVICE);
}
static int rk_hash_run(struct crypto_engine *engine, void *breq)
The patch below does not apply to the 6.1-stable tree.
If someone wants it applied there, or to any other stable or longterm
tree, then please email the backport, including the original git commit
id to <stable(a)vger.kernel.org>.
To reproduce the conflict and resubmit, you may use the following commands:
git fetch https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git/ linux-6.1.y
git checkout FETCH_HEAD
git cherry-pick -x 21140e5caf019e4a24e1ceabcaaa16bd693b393f
# <resolve conflicts, build, test, etc.>
git commit -s
git send-email --to '<stable(a)vger.kernel.org>' --in-reply-to '2025101646-unsent-pull-230d@gregkh' --subject-prefix 'PATCH 6.1.y' HEAD^..
Possible dependencies:
thanks,
greg k-h
------------------ original commit in Linus's tree ------------------
From 21140e5caf019e4a24e1ceabcaaa16bd693b393f Mon Sep 17 00:00:00 2001
From: Thomas Fourier <fourier.thomas(a)gmail.com>
Date: Wed, 3 Sep 2025 10:06:46 +0200
Subject: [PATCH] crypto: rockchip - Fix dma_unmap_sg() nents value
The dma_unmap_sg() functions should be called with the same nents as the
dma_map_sg(), not the value the map function returned.
Fixes: 57d67c6e8219 ("crypto: rockchip - rework by using crypto_engine")
Cc: <stable(a)vger.kernel.org>
Signed-off-by: Thomas Fourier <fourier.thomas(a)gmail.com>
Signed-off-by: Herbert Xu <herbert(a)gondor.apana.org.au>
diff --git a/drivers/crypto/rockchip/rk3288_crypto_ahash.c b/drivers/crypto/rockchip/rk3288_crypto_ahash.c
index d6928ebe9526..b9f5a8b42e66 100644
--- a/drivers/crypto/rockchip/rk3288_crypto_ahash.c
+++ b/drivers/crypto/rockchip/rk3288_crypto_ahash.c
@@ -254,7 +254,7 @@ static void rk_hash_unprepare(struct crypto_engine *engine, void *breq)
struct rk_ahash_rctx *rctx = ahash_request_ctx(areq);
struct rk_crypto_info *rkc = rctx->dev;
- dma_unmap_sg(rkc->dev, areq->src, rctx->nrsg, DMA_TO_DEVICE);
+ dma_unmap_sg(rkc->dev, areq->src, sg_nents(areq->src), DMA_TO_DEVICE);
}
static int rk_hash_run(struct crypto_engine *engine, void *breq)
The patch below does not apply to the 6.6-stable tree.
If someone wants it applied there, or to any other stable or longterm
tree, then please email the backport, including the original git commit
id to <stable(a)vger.kernel.org>.
To reproduce the conflict and resubmit, you may use the following commands:
git fetch https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git/ linux-6.6.y
git checkout FETCH_HEAD
git cherry-pick -x 0c43094f8cc9d3d99d835c0ac9c4fe1ccc62babd
# <resolve conflicts, build, test, etc.>
git commit -s
git send-email --to '<stable(a)vger.kernel.org>' --in-reply-to '2025101614-turbofan-sufferer-957e@gregkh' --subject-prefix 'PATCH 6.6.y' HEAD^..
Possible dependencies:
thanks,
greg k-h
------------------ original commit in Linus's tree ------------------
From 0c43094f8cc9d3d99d835c0ac9c4fe1ccc62babd Mon Sep 17 00:00:00 2001
From: Nam Cao <namcao(a)linutronix.de>
Date: Tue, 15 Jul 2025 14:46:34 +0200
Subject: [PATCH] eventpoll: Replace rwlock with spinlock
The ready event list of an epoll object is protected by read-write
semaphore:
- The consumer (waiter) acquires the write lock and takes items.
- the producer (waker) takes the read lock and adds items.
The point of this design is enabling epoll to scale well with large number
of producers, as multiple producers can hold the read lock at the same
time.
Unfortunately, this implementation may cause scheduling priority inversion
problem. Suppose the consumer has higher scheduling priority than the
producer. The consumer needs to acquire the write lock, but may be blocked
by the producer holding the read lock. Since read-write semaphore does not
support priority-boosting for the readers (even with CONFIG_PREEMPT_RT=y),
we have a case of priority inversion: a higher priority consumer is blocked
by a lower priority producer. This problem was reported in [1].
Furthermore, this could also cause stall problem, as described in [2].
Fix this problem by replacing rwlock with spinlock.
This reduces the event bandwidth, as the producers now have to contend with
each other for the spinlock. According to the benchmark from
https://github.com/rouming/test-tools/blob/master/stress-epoll.c:
On 12 x86 CPUs:
Before After Diff
threads events/ms events/ms
8 7162 4956 -31%
16 8733 5383 -38%
32 7968 5572 -30%
64 10652 5739 -46%
128 11236 5931 -47%
On 4 riscv CPUs:
Before After Diff
threads events/ms events/ms
8 2958 2833 -4%
16 3323 3097 -7%
32 3451 3240 -6%
64 3554 3178 -11%
128 3601 3235 -10%
Although the numbers look bad, it should be noted that this benchmark
creates multiple threads who do nothing except constantly generating new
epoll events, thus contention on the spinlock is high. For real workload,
the event rate is likely much lower, and the performance drop is not as
bad.
Using another benchmark (perf bench epoll wait) where spinlock contention
is lower, improvement is even observed on x86:
On 12 x86 CPUs:
Before: Averaged 110279 operations/sec (+- 1.09%), total secs = 8
After: Averaged 114577 operations/sec (+- 2.25%), total secs = 8
On 4 riscv CPUs:
Before: Averaged 175767 operations/sec (+- 0.62%), total secs = 8
After: Averaged 167396 operations/sec (+- 0.23%), total secs = 8
In conclusion, no one is likely to be upset over this change. After all,
spinlock was used originally for years, and the commit which converted to
rwlock didn't mention a real workload, just that the benchmark numbers are
nice.
This patch is not exactly the revert of commit a218cc491420 ("epoll: use
rwlock in order to reduce ep_poll_callback() contention"), because git
revert conflicts in some places which are not obvious on the resolution.
This patch is intended to be backported, therefore go with the obvious
approach:
- Replace rwlock_t with spinlock_t one to one
- Delete list_add_tail_lockless() and chain_epi_lockless(). These were
introduced to allow producers to concurrently add items to the list.
But now that spinlock no longer allows producers to touch the event
list concurrently, these two functions are not necessary anymore.
Fixes: a218cc491420 ("epoll: use rwlock in order to reduce ep_poll_callback() contention")
Signed-off-by: Nam Cao <namcao(a)linutronix.de>
Link: https://lore.kernel.org/ec92458ea357ec503c737ead0f10b2c6e4c37d47.1752581388…
Tested-by: K Prateek Nayak <kprateek.nayak(a)amd.com>
Cc: stable(a)vger.kernel.org
Reported-by: Frederic Weisbecker <frederic(a)kernel.org>
Closes: https://lore.kernel.org/linux-rt-users/20210825132754.GA895675@lothringen/ [1]
Reported-by: Valentin Schneider <vschneid(a)redhat.com>
Closes: https://lore.kernel.org/linux-rt-users/xhsmhttqvnall.mognet@vschneid.remote… [2]
Signed-off-by: Christian Brauner <brauner(a)kernel.org>
diff --git a/fs/eventpoll.c b/fs/eventpoll.c
index b22d6f819f78..ee7c4b683ec3 100644
--- a/fs/eventpoll.c
+++ b/fs/eventpoll.c
@@ -46,10 +46,10 @@
*
* 1) epnested_mutex (mutex)
* 2) ep->mtx (mutex)
- * 3) ep->lock (rwlock)
+ * 3) ep->lock (spinlock)
*
* The acquire order is the one listed above, from 1 to 3.
- * We need a rwlock (ep->lock) because we manipulate objects
+ * We need a spinlock (ep->lock) because we manipulate objects
* from inside the poll callback, that might be triggered from
* a wake_up() that in turn might be called from IRQ context.
* So we can't sleep inside the poll callback and hence we need
@@ -195,7 +195,7 @@ struct eventpoll {
struct list_head rdllist;
/* Lock which protects rdllist and ovflist */
- rwlock_t lock;
+ spinlock_t lock;
/* RB tree root used to store monitored fd structs */
struct rb_root_cached rbr;
@@ -741,10 +741,10 @@ static void ep_start_scan(struct eventpoll *ep, struct list_head *txlist)
* in a lockless way.
*/
lockdep_assert_irqs_enabled();
- write_lock_irq(&ep->lock);
+ spin_lock_irq(&ep->lock);
list_splice_init(&ep->rdllist, txlist);
WRITE_ONCE(ep->ovflist, NULL);
- write_unlock_irq(&ep->lock);
+ spin_unlock_irq(&ep->lock);
}
static void ep_done_scan(struct eventpoll *ep,
@@ -752,7 +752,7 @@ static void ep_done_scan(struct eventpoll *ep,
{
struct epitem *epi, *nepi;
- write_lock_irq(&ep->lock);
+ spin_lock_irq(&ep->lock);
/*
* During the time we spent inside the "sproc" callback, some
* other events might have been queued by the poll callback.
@@ -793,7 +793,7 @@ static void ep_done_scan(struct eventpoll *ep,
wake_up(&ep->wq);
}
- write_unlock_irq(&ep->lock);
+ spin_unlock_irq(&ep->lock);
}
static void ep_get(struct eventpoll *ep)
@@ -868,10 +868,10 @@ static bool __ep_remove(struct eventpoll *ep, struct epitem *epi, bool force)
rb_erase_cached(&epi->rbn, &ep->rbr);
- write_lock_irq(&ep->lock);
+ spin_lock_irq(&ep->lock);
if (ep_is_linked(epi))
list_del_init(&epi->rdllink);
- write_unlock_irq(&ep->lock);
+ spin_unlock_irq(&ep->lock);
wakeup_source_unregister(ep_wakeup_source(epi));
/*
@@ -1152,7 +1152,7 @@ static int ep_alloc(struct eventpoll **pep)
return -ENOMEM;
mutex_init(&ep->mtx);
- rwlock_init(&ep->lock);
+ spin_lock_init(&ep->lock);
init_waitqueue_head(&ep->wq);
init_waitqueue_head(&ep->poll_wait);
INIT_LIST_HEAD(&ep->rdllist);
@@ -1239,100 +1239,10 @@ struct file *get_epoll_tfile_raw_ptr(struct file *file, int tfd,
}
#endif /* CONFIG_KCMP */
-/*
- * Adds a new entry to the tail of the list in a lockless way, i.e.
- * multiple CPUs are allowed to call this function concurrently.
- *
- * Beware: it is necessary to prevent any other modifications of the
- * existing list until all changes are completed, in other words
- * concurrent list_add_tail_lockless() calls should be protected
- * with a read lock, where write lock acts as a barrier which
- * makes sure all list_add_tail_lockless() calls are fully
- * completed.
- *
- * Also an element can be locklessly added to the list only in one
- * direction i.e. either to the tail or to the head, otherwise
- * concurrent access will corrupt the list.
- *
- * Return: %false if element has been already added to the list, %true
- * otherwise.
- */
-static inline bool list_add_tail_lockless(struct list_head *new,
- struct list_head *head)
-{
- struct list_head *prev;
-
- /*
- * This is simple 'new->next = head' operation, but cmpxchg()
- * is used in order to detect that same element has been just
- * added to the list from another CPU: the winner observes
- * new->next == new.
- */
- if (!try_cmpxchg(&new->next, &new, head))
- return false;
-
- /*
- * Initially ->next of a new element must be updated with the head
- * (we are inserting to the tail) and only then pointers are atomically
- * exchanged. XCHG guarantees memory ordering, thus ->next should be
- * updated before pointers are actually swapped and pointers are
- * swapped before prev->next is updated.
- */
-
- prev = xchg(&head->prev, new);
-
- /*
- * It is safe to modify prev->next and new->prev, because a new element
- * is added only to the tail and new->next is updated before XCHG.
- */
-
- prev->next = new;
- new->prev = prev;
-
- return true;
-}
-
-/*
- * Chains a new epi entry to the tail of the ep->ovflist in a lockless way,
- * i.e. multiple CPUs are allowed to call this function concurrently.
- *
- * Return: %false if epi element has been already chained, %true otherwise.
- */
-static inline bool chain_epi_lockless(struct epitem *epi)
-{
- struct eventpoll *ep = epi->ep;
-
- /* Fast preliminary check */
- if (epi->next != EP_UNACTIVE_PTR)
- return false;
-
- /* Check that the same epi has not been just chained from another CPU */
- if (cmpxchg(&epi->next, EP_UNACTIVE_PTR, NULL) != EP_UNACTIVE_PTR)
- return false;
-
- /* Atomically exchange tail */
- epi->next = xchg(&ep->ovflist, epi);
-
- return true;
-}
-
/*
* This is the callback that is passed to the wait queue wakeup
* mechanism. It is called by the stored file descriptors when they
* have events to report.
- *
- * This callback takes a read lock in order not to contend with concurrent
- * events from another file descriptor, thus all modifications to ->rdllist
- * or ->ovflist are lockless. Read lock is paired with the write lock from
- * ep_start/done_scan(), which stops all list modifications and guarantees
- * that lists state is seen correctly.
- *
- * Another thing worth to mention is that ep_poll_callback() can be called
- * concurrently for the same @epi from different CPUs if poll table was inited
- * with several wait queues entries. Plural wakeup from different CPUs of a
- * single wait queue is serialized by wq.lock, but the case when multiple wait
- * queues are used should be detected accordingly. This is detected using
- * cmpxchg() operation.
*/
static int ep_poll_callback(wait_queue_entry_t *wait, unsigned mode, int sync, void *key)
{
@@ -1343,7 +1253,7 @@ static int ep_poll_callback(wait_queue_entry_t *wait, unsigned mode, int sync, v
unsigned long flags;
int ewake = 0;
- read_lock_irqsave(&ep->lock, flags);
+ spin_lock_irqsave(&ep->lock, flags);
ep_set_busy_poll_napi_id(epi);
@@ -1372,12 +1282,15 @@ static int ep_poll_callback(wait_queue_entry_t *wait, unsigned mode, int sync, v
* chained in ep->ovflist and requeued later on.
*/
if (READ_ONCE(ep->ovflist) != EP_UNACTIVE_PTR) {
- if (chain_epi_lockless(epi))
+ if (epi->next == EP_UNACTIVE_PTR) {
+ epi->next = READ_ONCE(ep->ovflist);
+ WRITE_ONCE(ep->ovflist, epi);
ep_pm_stay_awake_rcu(epi);
+ }
} else if (!ep_is_linked(epi)) {
/* In the usual case, add event to ready list. */
- if (list_add_tail_lockless(&epi->rdllink, &ep->rdllist))
- ep_pm_stay_awake_rcu(epi);
+ list_add_tail(&epi->rdllink, &ep->rdllist);
+ ep_pm_stay_awake_rcu(epi);
}
/*
@@ -1410,7 +1323,7 @@ static int ep_poll_callback(wait_queue_entry_t *wait, unsigned mode, int sync, v
pwake++;
out_unlock:
- read_unlock_irqrestore(&ep->lock, flags);
+ spin_unlock_irqrestore(&ep->lock, flags);
/* We have to call this outside the lock */
if (pwake)
@@ -1745,7 +1658,7 @@ static int ep_insert(struct eventpoll *ep, const struct epoll_event *event,
}
/* We have to drop the new item inside our item list to keep track of it */
- write_lock_irq(&ep->lock);
+ spin_lock_irq(&ep->lock);
/* record NAPI ID of new item if present */
ep_set_busy_poll_napi_id(epi);
@@ -1762,7 +1675,7 @@ static int ep_insert(struct eventpoll *ep, const struct epoll_event *event,
pwake++;
}
- write_unlock_irq(&ep->lock);
+ spin_unlock_irq(&ep->lock);
/* We have to call this outside the lock */
if (pwake)
@@ -1826,7 +1739,7 @@ static int ep_modify(struct eventpoll *ep, struct epitem *epi,
* list, push it inside.
*/
if (ep_item_poll(epi, &pt, 1)) {
- write_lock_irq(&ep->lock);
+ spin_lock_irq(&ep->lock);
if (!ep_is_linked(epi)) {
list_add_tail(&epi->rdllink, &ep->rdllist);
ep_pm_stay_awake(epi);
@@ -1837,7 +1750,7 @@ static int ep_modify(struct eventpoll *ep, struct epitem *epi,
if (waitqueue_active(&ep->poll_wait))
pwake++;
}
- write_unlock_irq(&ep->lock);
+ spin_unlock_irq(&ep->lock);
}
/* We have to call this outside the lock */
@@ -2089,7 +2002,7 @@ static int ep_poll(struct eventpoll *ep, struct epoll_event __user *events,
init_wait(&wait);
wait.func = ep_autoremove_wake_function;
- write_lock_irq(&ep->lock);
+ spin_lock_irq(&ep->lock);
/*
* Barrierless variant, waitqueue_active() is called under
* the same lock on wakeup ep_poll_callback() side, so it
@@ -2108,7 +2021,7 @@ static int ep_poll(struct eventpoll *ep, struct epoll_event __user *events,
if (!eavail)
__add_wait_queue_exclusive(&ep->wq, &wait);
- write_unlock_irq(&ep->lock);
+ spin_unlock_irq(&ep->lock);
if (!eavail)
timed_out = !ep_schedule_timeout(to) ||
@@ -2124,7 +2037,7 @@ static int ep_poll(struct eventpoll *ep, struct epoll_event __user *events,
eavail = 1;
if (!list_empty_careful(&wait.entry)) {
- write_lock_irq(&ep->lock);
+ spin_lock_irq(&ep->lock);
/*
* If the thread timed out and is not on the wait queue,
* it means that the thread was woken up after its
@@ -2135,7 +2048,7 @@ static int ep_poll(struct eventpoll *ep, struct epoll_event __user *events,
if (timed_out)
eavail = list_empty(&wait.entry);
__remove_wait_queue(&ep->wq, &wait);
- write_unlock_irq(&ep->lock);
+ spin_unlock_irq(&ep->lock);
}
}
}
Hi Marek,
Thank you very much for fixing this bug and for your contribution.
Since my original report was not posted to a public mailing list, I would
appreciate it if you could add the following credit to this patch:
Reported-by: Shuangpeng Bai <SJB7183(a)psu.edu>
Thanks again!
Best regards,
Shuangpeng
The patch below does not apply to the 5.15-stable tree.
If someone wants it applied there, or to any other stable or longterm
tree, then please email the backport, including the original git commit
id to <stable(a)vger.kernel.org>.
To reproduce the conflict and resubmit, you may use the following commands:
git fetch https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git/ linux-5.15.y
git checkout FETCH_HEAD
git cherry-pick -x f965d111e68f4a993cc44d487d416e3d954eea11
# <resolve conflicts, build, test, etc.>
git commit -s
git send-email --to '<stable(a)vger.kernel.org>' --in-reply-to '2025101655-grandma-populate-0fb4@gregkh' --subject-prefix 'PATCH 5.15.y' HEAD^..
Possible dependencies:
thanks,
greg k-h
------------------ original commit in Linus's tree ------------------
From f965d111e68f4a993cc44d487d416e3d954eea11 Mon Sep 17 00:00:00 2001
From: "Rafael J. Wysocki" <rafael.j.wysocki(a)intel.com>
Date: Fri, 26 Sep 2025 12:19:41 +0200
Subject: [PATCH] cpufreq: CPPC: Avoid using CPUFREQ_ETERNAL as transition
delay
If cppc_get_transition_latency() returns CPUFREQ_ETERNAL to indicate a
failure to retrieve the transition latency value from the platform
firmware, the CPPC cpufreq driver will use that value (converted to
microseconds) as the policy transition delay, but it is way too large
for any practical use.
Address this by making the driver use the cpufreq's default
transition latency value (in microseconds) as the transition delay
if CPUFREQ_ETERNAL is returned by cppc_get_transition_latency().
Fixes: d4f3388afd48 ("cpufreq / CPPC: Set platform specific transition_delay_us")
Cc: 5.19+ <stable(a)vger.kernel.org> # 5.19
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki(a)intel.com>
Reviewed-by: Mario Limonciello (AMD) <superm1(a)kernel.org>
Reviewed-by: Jie Zhan <zhanjie9(a)hisilicon.com>
Acked-by: Viresh Kumar <viresh.kumar(a)linaro.org>
Reviewed-by: Qais Yousef <qyousef(a)layalina.io>
diff --git a/drivers/cpufreq/cppc_cpufreq.c b/drivers/cpufreq/cppc_cpufreq.c
index 12de0ac7bbaf..b71946937c52 100644
--- a/drivers/cpufreq/cppc_cpufreq.c
+++ b/drivers/cpufreq/cppc_cpufreq.c
@@ -308,6 +308,16 @@ static int cppc_verify_policy(struct cpufreq_policy_data *policy)
return 0;
}
+static unsigned int __cppc_cpufreq_get_transition_delay_us(unsigned int cpu)
+{
+ unsigned int transition_latency_ns = cppc_get_transition_latency(cpu);
+
+ if (transition_latency_ns == CPUFREQ_ETERNAL)
+ return CPUFREQ_DEFAULT_TRANSITION_LATENCY_NS / NSEC_PER_USEC;
+
+ return transition_latency_ns / NSEC_PER_USEC;
+}
+
/*
* The PCC subspace describes the rate at which platform can accept commands
* on the shared PCC channel (including READs which do not count towards freq
@@ -330,12 +340,12 @@ static unsigned int cppc_cpufreq_get_transition_delay_us(unsigned int cpu)
return 10000;
}
}
- return cppc_get_transition_latency(cpu) / NSEC_PER_USEC;
+ return __cppc_cpufreq_get_transition_delay_us(cpu);
}
#else
static unsigned int cppc_cpufreq_get_transition_delay_us(unsigned int cpu)
{
- return cppc_get_transition_latency(cpu) / NSEC_PER_USEC;
+ return __cppc_cpufreq_get_transition_delay_us(cpu);
}
#endif