September 2025 - Linux-stable-mirror

[PATCH 2/3] xhci: dbc: Fix full DbC transfer ring after several reconnects

by Mathias Nyman

Pending requests will be flushed on disconnect, and the corresponding TRBs will be turned into No-op TRBs, which are ignored by the xHC controller once it starts processing the ring. If the USB debug cable repeatedly disconnects before ring is started then the ring will eventually be filled with No-op TRBs. No new transfers can be queued when the ring is full, and driver will print the following error message: "xhci_hcd 0000:00:14.0: failed to queue trbs" This is a normal case for 'in' transfers where TRBs are always enqueued in advance, ready to take on incoming data. If no data arrives, and device is disconnected, then ring dequeue will remain at beginning of the ring while enqueue points to first free TRB after last cancelled No-op TRB. s Solve this by reinitializing the rings when the debug cable disconnects and DbC is leaving the configured state. Clear the whole ring buffer and set enqueue and dequeue to the beginning of ring, and set cycle bit to its initial state. Cc: stable(a)vger.kernel.org Fixes: dfba2174dc42 ("usb: xhci: Add DbC support in xHCI driver") Signed-off-by: Mathias Nyman <mathias.nyman(a)linux.intel.com> --- drivers/usb/host/xhci-dbgcap.c | 23 +++++++++++++++++++++-- 1 file changed, 21 insertions(+), 2 deletions(-) diff --git a/drivers/usb/host/xhci-dbgcap.c b/drivers/usb/host/xhci-dbgcap.c index d0faff233e3e..63edf2d8f245 100644 --- a/drivers/usb/host/xhci-dbgcap.c +++ b/drivers/usb/host/xhci-dbgcap.c @@ -462,6 +462,25 @@ static void xhci_dbc_ring_init(struct xhci_ring *ring) xhci_initialize_ring_info(ring); } +static int xhci_dbc_reinit_ep_rings(struct xhci_dbc *dbc) +{ + struct xhci_ring *in_ring = dbc->eps[BULK_IN].ring; + struct xhci_ring *out_ring = dbc->eps[BULK_OUT].ring; + + if (!in_ring || !out_ring || !dbc->ctx) { + dev_warn(dbc->dev, "Can't re-init unallocated endpoints\n"); + return -ENODEV; + } + + xhci_dbc_ring_init(in_ring); + xhci_dbc_ring_init(out_ring); + + /* set ep context enqueue, dequeue, and cycle to initial values */ + xhci_dbc_init_ep_contexts(dbc); + + return 0; +} + static struct xhci_ring * xhci_dbc_ring_alloc(struct device *dev, enum xhci_ring_type type, gfp_t flags) { @@ -885,7 +904,7 @@ static enum evtreturn xhci_dbc_do_handle_events(struct xhci_dbc *dbc) dev_info(dbc->dev, "DbC cable unplugged\n"); dbc->state = DS_ENABLED; xhci_dbc_flush_requests(dbc); - + xhci_dbc_reinit_ep_rings(dbc); return EVT_DISC; } @@ -895,7 +914,7 @@ static enum evtreturn xhci_dbc_do_handle_events(struct xhci_dbc *dbc) writel(portsc, &dbc->regs->portsc); dbc->state = DS_ENABLED; xhci_dbc_flush_requests(dbc); - + xhci_dbc_reinit_ep_rings(dbc); return EVT_DISC; } -- 2.43.0

1 week, 5 days

1
0
0 0

[PATCH 1/3] xhci: dbc: decouple endpoint allocation from initialization

by Mathias Nyman

Decouple allocation of endpoint ring buffer from initialization of the buffer, and initialization of endpoint context parts from from the rest of the contexts. It allows driver to clear up and reinitialize endpoint rings after disconnect without reallocating everything. This is a prerequisite for the next patch that prevents the transfer ring from filling up with cancelled (no-op) TRBs if a debug cable is reconnected several times without transferring anything. Cc: stable(a)vger.kernel.org Fixes: dfba2174dc42 ("usb: xhci: Add DbC support in xHCI driver") Signed-off-by: Mathias Nyman <mathias.nyman(a)linux.intel.com> --- drivers/usb/host/xhci-dbgcap.c | 71 ++++++++++++++++++++++------------ 1 file changed, 46 insertions(+), 25 deletions(-) diff --git a/drivers/usb/host/xhci-dbgcap.c b/drivers/usb/host/xhci-dbgcap.c index 06a2edb9e86e..d0faff233e3e 100644 --- a/drivers/usb/host/xhci-dbgcap.c +++ b/drivers/usb/host/xhci-dbgcap.c @@ -101,13 +101,34 @@ static u32 xhci_dbc_populate_strings(struct dbc_str_descs *strings) return string_length; } +static void xhci_dbc_init_ep_contexts(struct xhci_dbc *dbc) +{ + struct xhci_ep_ctx *ep_ctx; + unsigned int max_burst; + dma_addr_t deq; + + max_burst = DBC_CTRL_MAXBURST(readl(&dbc->regs->control)); + + /* Populate bulk out endpoint context: */ + ep_ctx = dbc_bulkout_ctx(dbc); + deq = dbc_bulkout_enq(dbc); + ep_ctx->ep_info = 0; + ep_ctx->ep_info2 = dbc_epctx_info2(BULK_OUT_EP, 1024, max_burst); + ep_ctx->deq = cpu_to_le64(deq | dbc->ring_out->cycle_state); + + /* Populate bulk in endpoint context: */ + ep_ctx = dbc_bulkin_ctx(dbc); + deq = dbc_bulkin_enq(dbc); + ep_ctx->ep_info = 0; + ep_ctx->ep_info2 = dbc_epctx_info2(BULK_IN_EP, 1024, max_burst); + ep_ctx->deq = cpu_to_le64(deq | dbc->ring_in->cycle_state); +} + static void xhci_dbc_init_contexts(struct xhci_dbc *dbc, u32 string_length) { struct dbc_info_context *info; - struct xhci_ep_ctx *ep_ctx; u32 dev_info; - dma_addr_t deq, dma; - unsigned int max_burst; + dma_addr_t dma; if (!dbc) return; @@ -121,20 +142,8 @@ static void xhci_dbc_init_contexts(struct xhci_dbc *dbc, u32 string_length) info->serial = cpu_to_le64(dma + DBC_MAX_STRING_LENGTH * 3); info->length = cpu_to_le32(string_length); - /* Populate bulk out endpoint context: */ - ep_ctx = dbc_bulkout_ctx(dbc); - max_burst = DBC_CTRL_MAXBURST(readl(&dbc->regs->control)); - deq = dbc_bulkout_enq(dbc); - ep_ctx->ep_info = 0; - ep_ctx->ep_info2 = dbc_epctx_info2(BULK_OUT_EP, 1024, max_burst); - ep_ctx->deq = cpu_to_le64(deq | dbc->ring_out->cycle_state); - - /* Populate bulk in endpoint context: */ - ep_ctx = dbc_bulkin_ctx(dbc); - deq = dbc_bulkin_enq(dbc); - ep_ctx->ep_info = 0; - ep_ctx->ep_info2 = dbc_epctx_info2(BULK_IN_EP, 1024, max_burst); - ep_ctx->deq = cpu_to_le64(deq | dbc->ring_in->cycle_state); + /* Populate bulk in and out endpoint contexts: */ + xhci_dbc_init_ep_contexts(dbc); /* Set DbC context and info registers: */ lo_hi_writeq(dbc->ctx->dma, &dbc->regs->dccp); @@ -436,6 +445,23 @@ dbc_alloc_ctx(struct device *dev, gfp_t flags) return ctx; } +static void xhci_dbc_ring_init(struct xhci_ring *ring) +{ + struct xhci_segment *seg = ring->first_seg; + + /* clear all trbs on ring in case of old ring */ + memset(seg->trbs, 0, TRB_SEGMENT_SIZE); + + /* Only event ring does not use link TRB */ + if (ring->type != TYPE_EVENT) { + union xhci_trb *trb = &seg->trbs[TRBS_PER_SEGMENT - 1]; + + trb->link.segment_ptr = cpu_to_le64(ring->first_seg->dma); + trb->link.control = cpu_to_le32(LINK_TOGGLE | TRB_TYPE(TRB_LINK)); + } + xhci_initialize_ring_info(ring); +} + static struct xhci_ring * xhci_dbc_ring_alloc(struct device *dev, enum xhci_ring_type type, gfp_t flags) { @@ -464,15 +490,10 @@ xhci_dbc_ring_alloc(struct device *dev, enum xhci_ring_type type, gfp_t flags) seg->dma = dma; - /* Only event ring does not use link TRB */ - if (type != TYPE_EVENT) { - union xhci_trb *trb = &seg->trbs[TRBS_PER_SEGMENT - 1]; - - trb->link.segment_ptr = cpu_to_le64(dma); - trb->link.control = cpu_to_le32(LINK_TOGGLE | TRB_TYPE(TRB_LINK)); - } INIT_LIST_HEAD(&ring->td_list); - xhci_initialize_ring_info(ring); + + xhci_dbc_ring_init(ring); + return ring; dma_fail: kfree(seg); -- 2.43.0

1 week, 5 days

1
0
0 0

[PATCH 1/2] pinctrl: samsung: Drop unused S3C24xx driver data

by Krzysztof Kozlowski

Drop unused declarations after S3C24xx SoC family removal in the commit 61b7f8920b17 ("ARM: s3c: remove all s3c24xx support"). Fixes: 1ea35b355722 ("ARM: s3c: remove s3c24xx specific hacks") Cc: <stable(a)vger.kernel.org> Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski(a)linaro.org> --- drivers/pinctrl/samsung/pinctrl-samsung.h | 4 ---- 1 file changed, 4 deletions(-) diff --git a/drivers/pinctrl/samsung/pinctrl-samsung.h b/drivers/pinctrl/samsung/pinctrl-samsung.h index 1cabcbe1401a..a51aee8c5f89 100644 --- a/drivers/pinctrl/samsung/pinctrl-samsung.h +++ b/drivers/pinctrl/samsung/pinctrl-samsung.h @@ -402,10 +402,6 @@ extern const struct samsung_pinctrl_of_match_data exynosautov920_of_data; extern const struct samsung_pinctrl_of_match_data fsd_of_data; extern const struct samsung_pinctrl_of_match_data gs101_of_data; extern const struct samsung_pinctrl_of_match_data s3c64xx_of_data; -extern const struct samsung_pinctrl_of_match_data s3c2412_of_data; -extern const struct samsung_pinctrl_of_match_data s3c2416_of_data; -extern const struct samsung_pinctrl_of_match_data s3c2440_of_data; -extern const struct samsung_pinctrl_of_match_data s3c2450_of_data; extern const struct samsung_pinctrl_of_match_data s5pv210_of_data; #endif /* __PINCTRL_SAMSUNG_H */ -- 2.48.1

1 week, 5 days

1
1
0 0

[PATCH v2 2/3] drm/xe: Allow the pm notifier to continue on failure

by Thomas Hellström

Its actions are opportunistic anyway and will be completed on device suspend. Marking as a fix to simplify backporting of the fix that follows in the series. v2: - Keep the runtime pm reference over suspend / hibernate and document why. (Matt Auld, Rodrigo Vivi): Fixes: c6a4d46ec1d7 ("drm/xe: evict user memory in PM notifier") Cc: Matthew Auld <matthew.auld(a)intel.com> Cc: Rodrigo Vivi <rodrigo.vivi(a)intel.com> Cc: <stable(a)vger.kernel.org> # v6.16+ Signed-off-by: Thomas Hellström <thomas.hellstrom(a)linux.intel.com> --- drivers/gpu/drm/xe/xe_pm.c | 17 +++++++---------- 1 file changed, 7 insertions(+), 10 deletions(-) diff --git a/drivers/gpu/drm/xe/xe_pm.c b/drivers/gpu/drm/xe/xe_pm.c index a2e85030b7f4..bee9aacd82e7 100644 --- a/drivers/gpu/drm/xe/xe_pm.c +++ b/drivers/gpu/drm/xe/xe_pm.c @@ -308,17 +308,17 @@ static int xe_pm_notifier_callback(struct notifier_block *nb, case PM_SUSPEND_PREPARE: xe_pm_runtime_get(xe); err = xe_bo_evict_all_user(xe); - if (err) { + if (err) drm_dbg(&xe->drm, "Notifier evict user failed (%d)\n", err); - xe_pm_runtime_put(xe); - break; - } err = xe_bo_notifier_prepare_all_pinned(xe); - if (err) { + if (err) drm_dbg(&xe->drm, "Notifier prepare pin failed (%d)\n", err); - xe_pm_runtime_put(xe); - } + /* + * Keep the runtime pm reference until post hibernation / post suspend to + * avoid a runtime suspend interfering with evicted objects or backup + * allocations. + */ break; case PM_POST_HIBERNATION: case PM_POST_SUSPEND: @@ -327,9 +327,6 @@ static int xe_pm_notifier_callback(struct notifier_block *nb, break; } - if (err) - return NOTIFY_BAD; - return NOTIFY_DONE; } -- 2.50.1

1 week, 5 days

2
1
0 0

[PATCH net v4] selftests: net: add test for destination in broadcast packets

by Oscar Maes

Add test to check the broadcast ethernet destination field is set correctly. This test sends a broadcast ping, captures it using tcpdump and ensures that all bits of the 6 octet ethernet destination address are correctly set by examining the output capture file. Signed-off-by: Oscar Maes <oscmaes92(a)gmail.com> Co-authored-by: Brett A C Sheffield <bacs(a)librecast.net> --- v3 -> v4: - Added Brett as co-author - Wait for tcpdump to bind using slowwait Links: - Discussion: https://lore.kernel.org/netdev/20250822165231.4353-4-bacs@librecast.net/ - Previous version: https://lore.kernel.org/netdev/20250827062322.4807-2-oscmaes92@gmail.com/ Thanks to Brett Sheffield for writing the initial version of this selftest! tools/testing/selftests/net/Makefile | 1 + .../selftests/net/broadcast_ether_dst.sh | 83 +++++++++++++++++++ 2 files changed, 84 insertions(+) create mode 100755 tools/testing/selftests/net/broadcast_ether_dst.sh diff --git a/tools/testing/selftests/net/Makefile b/tools/testing/selftests/net/Makefile index b31a71f2b372..56ad10ea6628 100644 --- a/tools/testing/selftests/net/Makefile +++ b/tools/testing/selftests/net/Makefile @@ -115,6 +115,7 @@ TEST_PROGS += skf_net_off.sh TEST_GEN_FILES += skf_net_off TEST_GEN_FILES += tfo TEST_PROGS += tfo_passive.sh +TEST_PROGS += broadcast_ether_dst.sh TEST_PROGS += broadcast_pmtu.sh TEST_PROGS += ipv6_force_forwarding.sh diff --git a/tools/testing/selftests/net/broadcast_ether_dst.sh b/tools/testing/selftests/net/broadcast_ether_dst.sh new file mode 100755 index 000000000000..334a7eca8a80 --- /dev/null +++ b/tools/testing/selftests/net/broadcast_ether_dst.sh @@ -0,0 +1,83 @@ +#!/bin/bash +# SPDX-License-Identifier: GPL-2.0 +# +# Author: Brett A C Sheffield <bacs(a)librecast.net> +# Author: Oscar Maes <oscmaes92(a)gmail.com> +# +# Ensure destination ethernet field is correctly set for +# broadcast packets + +source lib.sh + +CLIENT_IP4="192.168.0.1" +GW_IP4="192.168.0.2" + +setup() { + setup_ns CLIENT_NS SERVER_NS + + ip -net "${SERVER_NS}" link add link1 type veth \ + peer name link0 netns "${CLIENT_NS}" + + ip -net "${CLIENT_NS}" link set link0 up + ip -net "${CLIENT_NS}" addr add "${CLIENT_IP4}"/24 dev link0 + + ip -net "${SERVER_NS}" link set link1 up + + ip -net "${CLIENT_NS}" route add default via "${GW_IP4}" + ip netns exec "${CLIENT_NS}" arp -s "${GW_IP4}" 00:11:22:33:44:55 +} + +cleanup() { + rm -f "${CAPFILE}" "${OUTPUT}" + ip -net "${SERVER_NS}" link del link1 + cleanup_ns "${CLIENT_NS}" "${SERVER_NS}" +} + +test_broadcast_ether_dst() { + local rc=0 + CAPFILE=$(mktemp -u cap.XXXXXXXXXX) + OUTPUT=$(mktemp -u out.XXXXXXXXXX) + + echo "Testing ethernet broadcast destination" + + # start tcpdump listening for icmp + # tcpdump will exit after receiving a single packet + # timeout will kill tcpdump if it is still running after 2s + timeout 2s ip netns exec "${CLIENT_NS}" \ + tcpdump -i link0 -c 1 -w "${CAPFILE}" icmp &> "${OUTPUT}" & + pid=$! + slowwait 1 grep -qs "listening" "${OUTPUT}" + + # send broadcast ping + ip netns exec "${CLIENT_NS}" \ + ping -W0.01 -c1 -b 255.255.255.255 &> /dev/null + + # wait for tcpdump for exit after receiving packet + wait "${pid}" + + # compare ethernet destination field to ff:ff:ff:ff:ff:ff + ether_dst=$(tcpdump -r "${CAPFILE}" -tnne 2>/dev/null | \ + awk '{sub(/,/,"",$3); print $3}') + if [[ "${ether_dst}" == "ff:ff:ff:ff:ff:ff" ]]; then + echo "[ OK ]" + rc="${ksft_pass}" + else + echo "[FAIL] expected dst ether addr to be ff:ff:ff:ff:ff:ff," \ + "got ${ether_dst}" + rc="${ksft_fail}" + fi + + return "${rc}" +} + +if [ ! -x "$(command -v tcpdump)" ]; then + echo "SKIP: Could not run test without tcpdump tool" + exit "${ksft_skip}" +fi + +trap cleanup EXIT + +setup +test_broadcast_ether_dst + +exit $? -- 2.39.5

1 week, 5 days

6
10
0 0

IAA Mobility 2025 Verified List!

by Garnet Conwell

Hi, I’d like to share a verified database of 502,364 attendees and 750 exhibitors from IAA Mobility 2025. The file includes key information such as: Name, Job Title, Company, Location, Phone, and Email. Delivery is within 48 hours and the data is GDPR compliant. Labour Day Special: 20% discount available for a short time. If you’d like the pricing, just reply with “Send me the cost” and I’ll provide the details. Best regards, Garnet Conwell Sr. Marketing Manager P.S. To opt out of future updates, reply with “Unfollow”.

1 week, 5 days

1
0
0 0

[PATCH 2/2] mmc: sdhci-pci-gli: GL9767: Fix initializing the UHS-II interface during a power-on

by Ben Chuang

From: Ben Chuang <ben.chuang(a)genesyslogic.com.tw> According to the power structure of IC hardware design for UHS-II interface, reset control and timing must be added to the initialization process of powering on the UHS-II interface. Fixes: 27dd3b82557a ("mmc: sdhci-pci-gli: enable UHS-II mode for GL9767") Cc: stable(a)vger.kernel.org # v6.13+ Signed-off-by: Ben Chuang <ben.chuang(a)genesyslogic.com.tw> --- drivers/mmc/host/sdhci-pci-gli.c | 71 +++++++++++++++++++++++++++++++- 1 file changed, 70 insertions(+), 1 deletion(-) diff --git a/drivers/mmc/host/sdhci-pci-gli.c b/drivers/mmc/host/sdhci-pci-gli.c index 3a1de477e9af..85d0d7e6169c 100644 --- a/drivers/mmc/host/sdhci-pci-gli.c +++ b/drivers/mmc/host/sdhci-pci-gli.c @@ -283,6 +283,8 @@ #define PCIE_GLI_9767_UHS2_CTL2_ZC_VALUE 0xb #define PCIE_GLI_9767_UHS2_CTL2_ZC_CTL BIT(6) #define PCIE_GLI_9767_UHS2_CTL2_ZC_CTL_VALUE 0x1 +#define PCIE_GLI_9767_UHS2_CTL2_FORCE_PHY_RESETN BIT(13) +#define PCIE_GLI_9767_UHS2_CTL2_FORCE_RESETN_VALUE BIT(14) #define GLI_MAX_TUNING_LOOP 40 @@ -1179,6 +1181,69 @@ static void gl9767_set_low_power_negotiation(struct pci_dev *pdev, bool enable) gl9767_vhs_read(pdev); } +static void sdhci_gl9767_uhs2_phy_reset_assert(struct sdhci_host *host) +{ + struct sdhci_pci_slot *slot = sdhci_priv(host); + struct pci_dev *pdev = slot->chip->pdev; + u32 value; + + gl9767_vhs_write(pdev); + pci_read_config_dword(pdev, PCIE_GLI_9767_UHS2_CTL2, &value); + value |= PCIE_GLI_9767_UHS2_CTL2_FORCE_PHY_RESETN; + pci_write_config_dword(pdev, PCIE_GLI_9767_UHS2_CTL2, value); + value &= ~PCIE_GLI_9767_UHS2_CTL2_FORCE_RESETN_VALUE; + pci_write_config_dword(pdev, PCIE_GLI_9767_UHS2_CTL2, value); + gl9767_vhs_read(pdev); +} + +static void sdhci_gl9767_uhs2_phy_reset_deassert(struct sdhci_host *host) +{ + struct sdhci_pci_slot *slot = sdhci_priv(host); + struct pci_dev *pdev = slot->chip->pdev; + u32 value; + + gl9767_vhs_write(pdev); + pci_read_config_dword(pdev, PCIE_GLI_9767_UHS2_CTL2, &value); + value |= PCIE_GLI_9767_UHS2_CTL2_FORCE_RESETN_VALUE; + pci_write_config_dword(pdev, PCIE_GLI_9767_UHS2_CTL2, value); + value &= ~PCIE_GLI_9767_UHS2_CTL2_FORCE_PHY_RESETN; + pci_write_config_dword(pdev, PCIE_GLI_9767_UHS2_CTL2, value); + gl9767_vhs_read(pdev); +} + +static void __gl9767_uhs2_set_power(struct sdhci_host *host, unsigned char mode, unsigned short vdd) +{ + u8 pwr = 0; + + if (mode != MMC_POWER_OFF) { + pwr = sdhci_get_vdd_value(vdd); + if (!pwr) + WARN(1, "%s: Invalid vdd %#x\n", + mmc_hostname(host->mmc), vdd); + pwr |= SDHCI_VDD2_POWER_180; + } + + if (host->pwr == pwr) + return; + + host->pwr = pwr; + + if (pwr == 0) { + sdhci_writeb(host, 0, SDHCI_POWER_CONTROL); + } else { + sdhci_writeb(host, 0, SDHCI_POWER_CONTROL); + + pwr |= SDHCI_POWER_ON; + sdhci_writeb(host, pwr & 0xf, SDHCI_POWER_CONTROL); + mdelay(5); + + sdhci_gl9767_uhs2_phy_reset_assert(host); + pwr |= SDHCI_VDD2_POWER_ON; + sdhci_writeb(host, pwr, SDHCI_POWER_CONTROL); + mdelay(5); + } +} + static void sdhci_gl9767_set_clock(struct sdhci_host *host, unsigned int clock) { struct sdhci_pci_slot *slot = sdhci_priv(host); @@ -1205,6 +1270,10 @@ static void sdhci_gl9767_set_clock(struct sdhci_host *host, unsigned int clock) } sdhci_enable_clk(host, clk); + + if (mmc_card_uhs2(host->mmc)) + sdhci_gl9767_uhs2_phy_reset_deassert(host); + gl9767_set_low_power_negotiation(pdev, true); } @@ -1476,7 +1545,7 @@ static void sdhci_gl9767_set_power(struct sdhci_host *host, unsigned char mode, gl9767_vhs_read(pdev); sdhci_gli_overcurrent_event_enable(host, false); - sdhci_uhs2_set_power(host, mode, vdd); + __gl9767_uhs2_set_power(host, mode, vdd); sdhci_gli_overcurrent_event_enable(host, true); } else { gl9767_vhs_write(pdev); -- 2.51.0

1 week, 5 days

2
5
0 0

[PATCH] bus: vexpress-config: fix device node reference leak in vexpress_syscfg_probe

by Miaoqian Lin

Add missing of_node_put() call to release the device node reference obtained via of_parse_phandle(). Since we don't actually use the node, decrement the reference count immediately after obtaining it. Fixes: a5a38765ac79 ("bus: vexpress-config: simplify config bus probing") Cc: stable(a)vger.kernel.org Signed-off-by: Miaoqian Lin <linmq006(a)gmail.com> --- drivers/bus/vexpress-config.c | 1 + 1 file changed, 1 insertion(+) diff --git a/drivers/bus/vexpress-config.c b/drivers/bus/vexpress-config.c index 64ee920721ee..aa17f819dfc9 100644 --- a/drivers/bus/vexpress-config.c +++ b/drivers/bus/vexpress-config.c @@ -393,6 +393,7 @@ static int vexpress_syscfg_probe(struct platform_device *pdev) struct device_node *bridge_np; bridge_np = of_parse_phandle(node, "arm,vexpress,config-bridge", 0); + of_node_put(bridge_np); if (bridge_np != pdev->dev.parent->of_node) continue; -- 2.35.1

1 week, 5 days

2
1
0 0

[PATCH v3] mfd: intel_soc_pmic_chtdc_ti: Set use_single_read regmap_config flag

by Hans de Goede

Testing has shown that reading multiple registers at once (for 10-bit ADC values) does not work. Set the use_single_read regmap_config flag to make regmap split these for us. This should fix temperature opregion accesses done by drivers/acpi/pmic/intel_pmic_chtdc_ti.c and is also necessary for the upcoming drivers for the ADC and battery MFD cells. Fixes: 6bac0606fdba ("mfd: Add support for Cherry Trail Dollar Cove TI PMIC") Cc: stable(a)vger.kernel.org Reviewed-by: Andy Shevchenko <andy(a)kernel.org> Signed-off-by: Hans de Goede <hansg(a)kernel.org> --- Changes in v3: - Fix a few typos in the commit message Changes in v2: - Update comment to: "The hardware does not support reading multiple registers at once" --- drivers/mfd/intel_soc_pmic_chtdc_ti.c | 2 ++ 1 file changed, 2 insertions(+) diff --git a/drivers/mfd/intel_soc_pmic_chtdc_ti.c b/drivers/mfd/intel_soc_pmic_chtdc_ti.c index 4c1a68c9f575..6daf33e07ea0 100644 --- a/drivers/mfd/intel_soc_pmic_chtdc_ti.c +++ b/drivers/mfd/intel_soc_pmic_chtdc_ti.c @@ -82,6 +82,8 @@ static const struct regmap_config chtdc_ti_regmap_config = { .reg_bits = 8, .val_bits = 8, .max_register = 0xff, + /* The hardware does not support reading multiple registers at once */ + .use_single_read = true, }; static const struct regmap_irq chtdc_ti_irqs[] = { -- 2.49.0

1 week, 5 days

2
1
0 0

[PATCH] thunderbolt: debugfs: Fix dentry reference leaks in margining_port_init

by Miaoqian Lin

The debugfs_lookup() function returns a dentry with an increased reference count that must be released by calling dput(). Fixes: d0f1e0c2a699 ("thunderbolt: Add support for receiver lane margining") Cc: stable(a)vger.kernel.org Signed-off-by: Miaoqian Lin <linmq006(a)gmail.com> --- drivers/thunderbolt/debugfs.c | 1 + 1 file changed, 1 insertion(+) diff --git a/drivers/thunderbolt/debugfs.c b/drivers/thunderbolt/debugfs.c index f8328ca7e22e..2aadbec9a3e5 100644 --- a/drivers/thunderbolt/debugfs.c +++ b/drivers/thunderbolt/debugfs.c @@ -1770,6 +1770,7 @@ static void margining_port_init(struct tb_port *port) port->usb4->margining = margining_alloc(port, &port->usb4->dev, USB4_SB_TARGET_ROUTER, 0, parent); + dput(parent); } static void margining_port_remove(struct tb_port *port) -- 2.35.1

1 week, 5 days

2
1
0 0

2025

2024

2023

2022

2021

2020

2019

2018

2017

Linux-stable-mirror September 2025