August 2025 - Linux-stable-mirror

[PATCH net v3] net: usbnet: Fix the wrong netif_carrier_on() call

by Ammar Faizi

The commit referenced in the Fixes tag causes usbnet to malfunction (identified via git bisect). Post-commit, my external RJ45 LAN cable fails to connect. Linus also reported the same issue after pulling that commit. The code has a logic error: netif_carrier_on() is only called when the link is already on. Fix this by moving the netif_carrier_on() call outside the if-statement entirely. This ensures it is always called when EVENT_LINK_CARRIER_ON is set and properly clears it regardless of the link state. Cc: stable(a)vger.kernel.org Cc: Armando Budianto <sprite(a)gnuweeb.org> Reviewed-by: Simon Horman <horms(a)kernel.org> Suggested-by: Linus Torvalds <torvalds(a)linux-foundation.org> Link: https://lore.kernel.org/all/CAHk-=wjqL4uF0MG_c8+xHX1Vv8==sPYQrtzbdA3kzi9628… Closes: https://lore.kernel.org/netdev/CAHk-=wjKh8X4PT_mU1kD4GQrbjivMfPn-_hXa6han_B… Closes: https://lore.kernel.org/netdev/0752dee6-43d6-4e1f-81d2-4248142cccd2@gnuweeb… Fixes: 0d9cfc9b8cb1 ("net: usbnet: Avoid potential RCU stall on LINK_CHANGE event") Signed-off-by: Ammar Faizi <ammarfaizi2(a)gnuweeb.org> --- v3: - Move the netif_carrier_on() call outside of the if-statement entirely (Linus). v2: - Rebase on top of the latest netdev/net tree. The previous patch was based on 0d9cfc9b8cb1. Line numbers have changed since then. Link: https://lore.gnuweeb.org/gwml/20250801190310.58443-1-ammarfaizi2@gnuweeb.org drivers/net/usb/usbnet.c | 6 +++--- 1 file changed, 3 insertions(+), 3 deletions(-) diff --git a/drivers/net/usb/usbnet.c b/drivers/net/usb/usbnet.c index a38ffbf4b3f0..511c4154cf74 100644 --- a/drivers/net/usb/usbnet.c +++ b/drivers/net/usb/usbnet.c @@ -1113,32 +1113,32 @@ static const struct ethtool_ops usbnet_ethtool_ops = { .set_link_ksettings = usbnet_set_link_ksettings_mii, }; /*-------------------------------------------------------------------------*/ static void __handle_link_change(struct usbnet *dev) { if (!test_bit(EVENT_DEV_OPEN, &dev->flags)) return; + if (test_and_clear_bit(EVENT_LINK_CARRIER_ON, &dev->flags)) + netif_carrier_on(dev->net); + if (!netif_carrier_ok(dev->net)) { /* kill URBs for reading packets to save bus bandwidth */ unlink_urbs(dev, &dev->rxq); /* * tx_timeout will unlink URBs for sending packets and * tx queue is stopped by netcore after link becomes off */ } else { - if (test_and_clear_bit(EVENT_LINK_CARRIER_ON, &dev->flags)) - netif_carrier_on(dev->net); - /* submitting URBs for reading packets */ queue_work(system_bh_wq, &dev->bh_work); } /* hard_mtu or rx_urb_size may change during link change */ usbnet_update_max_qlen(dev); clear_bit(EVENT_LINK_CHANGE, &dev->flags); } -- Ammar Faizi

1 month

2
1
0 0

[PATCH] net: usb: qmi_wwan: add Telit Cinterion FN990A w/audio composition

by Fabio Porcedda

Add the following Telit Cinterion FN990A w/audio composition: 0x1077: tty (diag) + adb + rmnet + audio + tty (AT/NMEA) + tty (AT) + tty (AT) + tty (AT) T: Bus=01 Lev=01 Prnt=01 Port=09 Cnt=01 Dev#= 8 Spd=480 MxCh= 0 D: Ver= 2.10 Cls=00(>ifc ) Sub=00 Prot=00 MxPS=64 #Cfgs= 1 P: Vendor=1bc7 ProdID=1077 Rev=05.04 S: Manufacturer=Telit Wireless Solutions S: Product=FN990 S: SerialNumber=67e04c35 C: #Ifs=10 Cfg#= 1 Atr=e0 MxPwr=500mA I: If#= 0 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=ff Prot=30 Driver=option E: Ad=01(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=81(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms I: If#= 1 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=42 Prot=01 Driver=(none) E: Ad=02(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=82(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms I: If#= 2 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=ff Prot=50 Driver=qmi_wwan E: Ad=0f(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=83(I) Atr=03(Int.) MxPS= 8 Ivl=32ms E: Ad=8e(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms I: If#= 3 Alt= 0 #EPs= 0 Cls=01(audio) Sub=01 Prot=20 Driver=snd-usb-audio I: If#= 4 Alt= 1 #EPs= 1 Cls=01(audio) Sub=02 Prot=20 Driver=snd-usb-audio E: Ad=03(O) Atr=0d(Isoc) MxPS= 68 Ivl=1ms I: If#= 5 Alt= 1 #EPs= 1 Cls=01(audio) Sub=02 Prot=20 Driver=snd-usb-audio E: Ad=84(I) Atr=0d(Isoc) MxPS= 68 Ivl=1ms I: If#= 6 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=ff Prot=60 Driver=option E: Ad=04(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=85(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=86(I) Atr=03(Int.) MxPS= 10 Ivl=32ms I: If#= 7 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=ff Prot=40 Driver=option E: Ad=05(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=87(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=88(I) Atr=03(Int.) MxPS= 10 Ivl=32ms I: If#= 8 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=ff Prot=40 Driver=option E: Ad=06(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=89(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=8a(I) Atr=03(Int.) MxPS= 10 Ivl=32ms I: If#= 9 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=ff Prot=40 Driver=option E: Ad=07(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=8b(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=8c(I) Atr=03(Int.) MxPS= 10 Ivl=32ms Cc: stable(a)vger.kernel.org Signed-off-by: Fabio Porcedda <fabio.porcedda(a)gmail.com> --- drivers/net/usb/qmi_wwan.c | 1 + 1 file changed, 1 insertion(+) diff --git a/drivers/net/usb/qmi_wwan.c b/drivers/net/usb/qmi_wwan.c index f5647ee0adde..e56901bb6ebc 100644 --- a/drivers/net/usb/qmi_wwan.c +++ b/drivers/net/usb/qmi_wwan.c @@ -1361,6 +1361,7 @@ static const struct usb_device_id products[] = { {QMI_QUIRK_SET_DTR(0x1bc7, 0x1057, 2)}, /* Telit FN980 */ {QMI_QUIRK_SET_DTR(0x1bc7, 0x1060, 2)}, /* Telit LN920 */ {QMI_QUIRK_SET_DTR(0x1bc7, 0x1070, 2)}, /* Telit FN990A */ + {QMI_QUIRK_SET_DTR(0x1bc7, 0x1077, 2)}, /* Telit FN990A w/audio */ {QMI_QUIRK_SET_DTR(0x1bc7, 0x1080, 2)}, /* Telit FE990A */ {QMI_QUIRK_SET_DTR(0x1bc7, 0x10a0, 0)}, /* Telit FN920C04 */ {QMI_QUIRK_SET_DTR(0x1bc7, 0x10a4, 0)}, /* Telit FN920C04 */ -- 2.50.1

1 month

2
1
0 0

[PATCH 5.10.y 0/4] Backport series: "permit write-sealed memfd read-only shared mappings"

by Isaac J. Manjarres

Hello, Until kernel version 6.7, a write-sealed memfd could not be mapped as shared and read-only. This was clearly a bug, and was not inline with the description of F_SEAL_WRITE in the man page for fcntl()[1]. Lorenzo's series [2] fixed that issue and was merged in kernel version 6.7, but was not backported to older kernels. So, this issue is still present on kernels 5.4, 5.10, 5.15, 6.1, and 6.6. This series consists of backports of two of Lorenzo's series [2] and [3]. Note: for [2], I dropped the last patch in that series, since it wouldn't make sense to apply it due to [4] being part of this tree. In lieu of that, I backported [3] to ultimately allow write-sealed memfds to be mapped as read-only. [1] https://man7.org/linux/man-pages/man2/fcntl.2.html [2] https://lore.kernel.org/all/913628168ce6cce77df7d13a63970bae06a526e0.169711… [3] https://lkml.kernel.org/r/99fc35d2c62bd2e05571cf60d9f8b843c56069e0.17328047… [4] https://lore.kernel.org/all/6e0becb36d2f5472053ac5d544c0edfe9b899e25.173022… Lorenzo Stoakes (4): mm: drop the assumption that VM_SHARED always implies writable mm: update memfd seal write check to include F_SEAL_WRITE mm: reinstate ability to map write-sealed memfd mappings read-only selftests/memfd: add test for mapping write-sealed memfd read-only fs/hugetlbfs/inode.c | 2 +- include/linux/fs.h | 4 +- include/linux/memfd.h | 14 ++++ include/linux/mm.h | 80 +++++++++++++++------- kernel/fork.c | 2 +- mm/filemap.c | 2 +- mm/madvise.c | 2 +- mm/memfd.c | 2 +- mm/mmap.c | 10 ++- mm/shmem.c | 2 +- tools/testing/selftests/memfd/memfd_test.c | 43 ++++++++++++ 11 files changed, 129 insertions(+), 34 deletions(-) -- 2.50.1.552.g942d659e1b-goog

1 month

5
16
0 0

[PATCH v2 1/1] userfaultfd: fix a crash when UFFDIO_MOVE handles a THP hole

by Suren Baghdasaryan

When UFFDIO_MOVE is used with UFFDIO_MOVE_MODE_ALLOW_SRC_HOLES and it encounters a non-present THP, it fails to properly recognize an unmapped hole and tries to access a non-existent folio, resulting in a crash. Add a check to skip non-present THPs. Fixes: adef440691ba ("userfaultfd: UFFDIO_MOVE uABI") Reported-by: syzbot+b446dbe27035ef6bd6c2(a)syzkaller.appspotmail.com Closes: https://lore.kernel.org/all/68794b5c.a70a0220.693ce.0050.GAE@google.com/ Signed-off-by: Suren Baghdasaryan <surenb(a)google.com> Cc: stable(a)vger.kernel.org --- Changes since v1 [1] - Fixed step size calculation, per Lokesh Gidra - Added missing check for UFFDIO_MOVE_MODE_ALLOW_SRC_HOLES, per Lokesh Gidra [1] https://lore.kernel.org/all/20250730170733.3829267-1-surenb@google.com/ mm/userfaultfd.c | 45 +++++++++++++++++++++++++++++---------------- 1 file changed, 29 insertions(+), 16 deletions(-) diff --git a/mm/userfaultfd.c b/mm/userfaultfd.c index cbed91b09640..b5af31c22731 100644 --- a/mm/userfaultfd.c +++ b/mm/userfaultfd.c @@ -1818,28 +1818,41 @@ ssize_t move_pages(struct userfaultfd_ctx *ctx, unsigned long dst_start, ptl = pmd_trans_huge_lock(src_pmd, src_vma); if (ptl) { - /* Check if we can move the pmd without splitting it. */ - if (move_splits_huge_pmd(dst_addr, src_addr, src_start + len) || - !pmd_none(dst_pmdval)) { - struct folio *folio = pmd_folio(*src_pmd); + if (pmd_present(*src_pmd) || is_pmd_migration_entry(*src_pmd)) { + /* Check if we can move the pmd without splitting it. */ + if (move_splits_huge_pmd(dst_addr, src_addr, src_start + len) || + !pmd_none(dst_pmdval)) { + if (pmd_present(*src_pmd)) { + struct folio *folio = pmd_folio(*src_pmd); + + if (!folio || (!is_huge_zero_folio(folio) && + !PageAnonExclusive(&folio->page))) { + spin_unlock(ptl); + err = -EBUSY; + break; + } + } - if (!folio || (!is_huge_zero_folio(folio) && - !PageAnonExclusive(&folio->page))) { spin_unlock(ptl); - err = -EBUSY; - break; + split_huge_pmd(src_vma, src_pmd, src_addr); + /* The folio will be split by move_pages_pte() */ + continue; } + err = move_pages_huge_pmd(mm, dst_pmd, src_pmd, + dst_pmdval, dst_vma, src_vma, + dst_addr, src_addr); + step_size = HPAGE_PMD_SIZE; + } else { spin_unlock(ptl); - split_huge_pmd(src_vma, src_pmd, src_addr); - /* The folio will be split by move_pages_pte() */ - continue; + if (!(mode & UFFDIO_MOVE_MODE_ALLOW_SRC_HOLES)) { + err = -ENOENT; + break; + } + /* nothing to do to move a hole */ + err = 0; + step_size = min(HPAGE_PMD_SIZE, src_start + len - src_addr); } - - err = move_pages_huge_pmd(mm, dst_pmd, src_pmd, - dst_pmdval, dst_vma, src_vma, - dst_addr, src_addr); - step_size = HPAGE_PMD_SIZE; } else { if (pmd_none(*src_pmd)) { if (!(mode & UFFDIO_MOVE_MODE_ALLOW_SRC_HOLES)) { base-commit: 01da54f10fddf3b01c5a3b80f6b16bbad390c302 -- 2.50.1.552.g942d659e1b-goog

1 month

4
20
0 0

[PATCH] drm/amdgpu/discovery: fix fw based ip discovery

by Alex Deucher

We only need the fw based discovery table for sysfs. No need to parse it. Additionally parsing some of the board specific tables may result in incorrect data on some boards. just load the binary and don't parse it on those boards. Closes: https://gitlab.freedesktop.org/drm/amd/-/issues/4441 Fixes: 80a0e8282933 ("drm/amdgpu/discovery: optionally use fw based ip discovery") Cc: stable(a)vger.kernel.org Signed-off-by: Alex Deucher <alexander.deucher(a)amd.com> --- drivers/gpu/drm/amd/amdgpu/amdgpu_device.c | 5 +- drivers/gpu/drm/amd/amdgpu/amdgpu_discovery.c | 72 ++++++++++--------- 2 files changed, 41 insertions(+), 36 deletions(-) diff --git a/drivers/gpu/drm/amd/amdgpu/amdgpu_device.c b/drivers/gpu/drm/amd/amdgpu/amdgpu_device.c index efe98ffb679a4..b2538cff222ce 100644 --- a/drivers/gpu/drm/amd/amdgpu/amdgpu_device.c +++ b/drivers/gpu/drm/amd/amdgpu/amdgpu_device.c @@ -2570,9 +2570,6 @@ static int amdgpu_device_parse_gpu_info_fw(struct amdgpu_device *adev) adev->firmware.gpu_info_fw = NULL; - if (adev->mman.discovery_bin) - return 0; - switch (adev->asic_type) { default: return 0; @@ -2594,6 +2591,8 @@ static int amdgpu_device_parse_gpu_info_fw(struct amdgpu_device *adev) chip_name = "arcturus"; break; case CHIP_NAVI12: + if (adev->mman.discovery_bin) + return 0; chip_name = "navi12"; break; } diff --git a/drivers/gpu/drm/amd/amdgpu/amdgpu_discovery.c b/drivers/gpu/drm/amd/amdgpu/amdgpu_discovery.c index 81b3443c8d7f4..27bd7659961e8 100644 --- a/drivers/gpu/drm/amd/amdgpu/amdgpu_discovery.c +++ b/drivers/gpu/drm/amd/amdgpu/amdgpu_discovery.c @@ -2555,40 +2555,11 @@ int amdgpu_discovery_set_ip_blocks(struct amdgpu_device *adev) switch (adev->asic_type) { case CHIP_VEGA10: - case CHIP_VEGA12: - case CHIP_RAVEN: - case CHIP_VEGA20: - case CHIP_ARCTURUS: - case CHIP_ALDEBARAN: - /* this is not fatal. We have a fallback below - * if the new firmwares are not present. some of - * this will be overridden below to keep things - * consistent with the current behavior. + /* This is not fatal. We only need the discovery + * binary for sysfs. We don't need it for a + * functional system. */ - r = amdgpu_discovery_reg_base_init(adev); - if (!r) { - amdgpu_discovery_harvest_ip(adev); - amdgpu_discovery_get_gfx_info(adev); - amdgpu_discovery_get_mall_info(adev); - amdgpu_discovery_get_vcn_info(adev); - } - break; - default: - r = amdgpu_discovery_reg_base_init(adev); - if (r) { - drm_err(&adev->ddev, "discovery failed: %d\n", r); - return r; - } - - amdgpu_discovery_harvest_ip(adev); - amdgpu_discovery_get_gfx_info(adev); - amdgpu_discovery_get_mall_info(adev); - amdgpu_discovery_get_vcn_info(adev); - break; - } - - switch (adev->asic_type) { - case CHIP_VEGA10: + amdgpu_discovery_init(adev); vega10_reg_base_init(adev); adev->sdma.num_instances = 2; adev->gmc.num_umc = 4; @@ -2611,6 +2582,11 @@ int amdgpu_discovery_set_ip_blocks(struct amdgpu_device *adev) adev->ip_versions[DCI_HWIP][0] = IP_VERSION(12, 0, 0); break; case CHIP_VEGA12: + /* This is not fatal. We only need the discovery + * binary for sysfs. We don't need it for a + * functional system. + */ + amdgpu_discovery_init(adev); vega10_reg_base_init(adev); adev->sdma.num_instances = 2; adev->gmc.num_umc = 4; @@ -2633,6 +2609,11 @@ int amdgpu_discovery_set_ip_blocks(struct amdgpu_device *adev) adev->ip_versions[DCI_HWIP][0] = IP_VERSION(12, 0, 1); break; case CHIP_RAVEN: + /* This is not fatal. We only need the discovery + * binary for sysfs. We don't need it for a + * functional system. + */ + amdgpu_discovery_init(adev); vega10_reg_base_init(adev); adev->sdma.num_instances = 1; adev->vcn.num_vcn_inst = 1; @@ -2674,6 +2655,11 @@ int amdgpu_discovery_set_ip_blocks(struct amdgpu_device *adev) } break; case CHIP_VEGA20: + /* This is not fatal. We only need the discovery + * binary for sysfs. We don't need it for a + * functional system. + */ + amdgpu_discovery_init(adev); vega20_reg_base_init(adev); adev->sdma.num_instances = 2; adev->gmc.num_umc = 8; @@ -2697,6 +2683,11 @@ int amdgpu_discovery_set_ip_blocks(struct amdgpu_device *adev) adev->ip_versions[DCI_HWIP][0] = IP_VERSION(12, 1, 0); break; case CHIP_ARCTURUS: + /* This is not fatal. We only need the discovery + * binary for sysfs. We don't need it for a + * functional system. + */ + amdgpu_discovery_init(adev); arct_reg_base_init(adev); adev->sdma.num_instances = 8; adev->vcn.num_vcn_inst = 2; @@ -2725,6 +2716,11 @@ int amdgpu_discovery_set_ip_blocks(struct amdgpu_device *adev) adev->ip_versions[UVD_HWIP][1] = IP_VERSION(2, 5, 0); break; case CHIP_ALDEBARAN: + /* This is not fatal. We only need the discovery + * binary for sysfs. We don't need it for a + * functional system. + */ + amdgpu_discovery_init(adev); aldebaran_reg_base_init(adev); adev->sdma.num_instances = 5; adev->vcn.num_vcn_inst = 2; @@ -2751,6 +2747,16 @@ int amdgpu_discovery_set_ip_blocks(struct amdgpu_device *adev) adev->ip_versions[XGMI_HWIP][0] = IP_VERSION(6, 1, 0); break; default: + r = amdgpu_discovery_reg_base_init(adev); + if (r) { + drm_err(&adev->ddev, "discovery failed: %d\n", r); + return r; + } + + amdgpu_discovery_harvest_ip(adev); + amdgpu_discovery_get_gfx_info(adev); + amdgpu_discovery_get_mall_info(adev); + amdgpu_discovery_get_vcn_info(adev); break; } -- 2.50.1

1 month

4
4
0 0

[PATCH 1/3] phy: tegra: xusb: fix device and OF node leak at probe

by Johan Hovold

Make sure to drop the references taken to the PMC OF node and device by of_parse_phandle() and of_find_device_by_node() during probe. Note the holding a reference to the PMC device does not prevent the PMC regmap from going away (e.g. if the PMC driver is unbound) so there is no need to keep the reference. Fixes: 2d1021487273 ("phy: tegra: xusb: Add wake/sleepwalk for Tegra210") Cc: stable(a)vger.kernel.org # 5.14 Cc: JC Kuo <jckuo(a)nvidia.com> Signed-off-by: Johan Hovold <johan(a)kernel.org> --- drivers/phy/tegra/xusb-tegra210.c | 6 +++++- 1 file changed, 5 insertions(+), 1 deletion(-) diff --git a/drivers/phy/tegra/xusb-tegra210.c b/drivers/phy/tegra/xusb-tegra210.c index ebc8a7e21a31..3409924498e9 100644 --- a/drivers/phy/tegra/xusb-tegra210.c +++ b/drivers/phy/tegra/xusb-tegra210.c @@ -3164,18 +3164,22 @@ tegra210_xusb_padctl_probe(struct device *dev, } pdev = of_find_device_by_node(np); + of_node_put(np); if (!pdev) { dev_warn(dev, "PMC device is not available\n"); goto out; } - if (!platform_get_drvdata(pdev)) + if (!platform_get_drvdata(pdev)) { + put_device(&pdev->dev); return ERR_PTR(-EPROBE_DEFER); + } padctl->regmap = dev_get_regmap(&pdev->dev, "usb_sleepwalk"); if (!padctl->regmap) dev_info(dev, "failed to find PMC regmap\n"); + put_device(&pdev->dev); out: return &padctl->base; } -- 2.49.1

1 month

2
1
0 0

[PATCH] drm/probe-helper: fix output polling not resuming after HPD IRQ storm

by Nicusor Huhulea

A regression in output polling was introduced by commit 4ad8d57d902fbc7c82507cfc1b031f3a07c3de6e ("drm: Check output polling initialized before disabling") in the 6.1.y stable tree. As a result, when the i915 driver detects an HPD IRQ storm and attempts to switch from IRQ-based hotplug detection to polling, output polling fails to resume. The root cause is the use of dev->mode_config.poll_running. Once poll_running is set (during the first connector detection) the calls to drm_kms_helper_poll_enable(), such as intel_hpd_irq_storm_switch_to_polling() fails to schedule output_poll_work as expected. Therefore, after an IRQ storm disables HPD IRQs, polling does not start, breaking hotplug detection. The fix is to remove the dev->mode_config.poll_running in the check condition, ensuring polling is always scheduled as requested. Notes: Initial analysis, assumptions, device testing details, the correct fix and detailed rationale were discussed here https://lore.kernel.org/stable/aI32HUzrT95nS_H9@ideak-desk/ Cc: stable(a)vger.kernel.org # 6.1.y Cc: Imre Deak <imre.deak(a)intel.com> Cc: Shradha Gupta <shradhagupta(a)linux.microsoft.com> Suggested-by: Imre Deak <imre.deak(a)intel.com> Signed-off-by: Nicusor Huhulea <nicusor.huhulea(a)siemens.com> --- drivers/gpu/drm/drm_probe_helper.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/gpu/drm/drm_probe_helper.c b/drivers/gpu/drm/drm_probe_helper.c index 0e5eadc6d44d..a515b78f839e 100644 --- a/drivers/gpu/drm/drm_probe_helper.c +++ b/drivers/gpu/drm/drm_probe_helper.c @@ -250,7 +250,7 @@ void drm_kms_helper_poll_enable(struct drm_device *dev) unsigned long delay = DRM_OUTPUT_POLL_PERIOD; if (drm_WARN_ON_ONCE(dev, !dev->mode_config.poll_enabled) || - !drm_kms_helper_poll || dev->mode_config.poll_running) + !drm_kms_helper_poll) return; drm_connector_list_iter_begin(dev, &conn_iter); -- 2.39.2

1 month

4
6
0 0

[PATCH] cdx: Fix off-by-one error in cdx_rpmsg_probe()

by Thorsten Blum

In cdx_rpmsg_probe(), strscpy() is incorrectly called with the length of the source string (excluding the NUL terminator) rather than the size of the destination buffer. This results in one character less being copied from 'cdx_rpmsg_id_table[0].name' to 'chinfo.name'. Use the destination buffer size instead to ensure the name is copied correctly. Cc: stable(a)vger.kernel.org Fixes: 2a226927d9b8 ("cdx: add rpmsg communication channel for CDX") Signed-off-by: Thorsten Blum <thorsten.blum(a)linux.dev> --- drivers/cdx/controller/cdx_rpmsg.c | 3 +-- 1 file changed, 1 insertion(+), 2 deletions(-) diff --git a/drivers/cdx/controller/cdx_rpmsg.c b/drivers/cdx/controller/cdx_rpmsg.c index 04b578a0be17..61f1a290ff08 100644 --- a/drivers/cdx/controller/cdx_rpmsg.c +++ b/drivers/cdx/controller/cdx_rpmsg.c @@ -129,8 +129,7 @@ static int cdx_rpmsg_probe(struct rpmsg_device *rpdev) chinfo.src = RPMSG_ADDR_ANY; chinfo.dst = rpdev->dst; - strscpy(chinfo.name, cdx_rpmsg_id_table[0].name, - strlen(cdx_rpmsg_id_table[0].name)); + strscpy(chinfo.name, cdx_rpmsg_id_table[0].name, sizeof(chinfo.name)); cdx_mcdi->ept = rpmsg_create_ept(rpdev, cdx_rpmsg_cb, NULL, chinfo); if (!cdx_mcdi->ept) { -- 2.50.1

1 month

1
0
0 0

[PATCH] blk-wbt: Fix io starvation in wbt_rqw_done()

by Julian Sun

Recently, we encountered the following hungtask: INFO: task kworker/11:2:2981147 blocked for more than 6266 seconds "echo 0 > /proc/sys/kernel/hung_task_timeout_secs" disables this message. kworker/11:2 D 0 2981147 2 0x80004000 Workqueue: cgroup_destroy css_free_rwork_fn Call Trace: __schedule+0x934/0xe10 schedule+0x40/0xb0 wb_wait_for_completion+0x52/0x80 ? finish_wait+0x80/0x80 mem_cgroup_css_free+0x3a/0x1b0 css_free_rwork_fn+0x42/0x380 process_one_work+0x1a2/0x360 worker_thread+0x30/0x390 ? create_worker+0x1a0/0x1a0 kthread+0x110/0x130 ? __kthread_cancel_work+0x40/0x40 ret_from_fork+0x1f/0x30 This is because the writeback thread has been continuously and repeatedly throttled by wbt, but at the same time, the writes of another thread proceed quite smoothly. After debugging, I believe it is caused by the following reasons. When thread A is blocked by wbt, the I/O issued by thread B will use a deeper queue depth(rwb->rq_depth.max_depth) because it meets the conditions of wb_recent_wait(), thus allowing thread B's I/O to be issued smoothly and resulting in the inflight I/O of wbt remaining relatively high. However, when I/O completes, due to the high inflight I/O of wbt, the condition "limit - inflight >= rwb->wb_background / 2" in wbt_rqw_done() cannot be satisfied, causing thread A's I/O to remain unable to be woken up. Some on-site information: >>> rwb.rq_depth.max_depth (unsigned int)48 >>> rqw.inflight.counter.value_() 44 >>> rqw.inflight.counter.value_() 35 >>> prog['jiffies'] - rwb.rqos.q.backing_dev_info.last_bdp_sleep (unsigned long)3 >>> prog['jiffies'] - rwb.rqos.q.backing_dev_info.last_bdp_sleep (unsigned long)2 >>> prog['jiffies'] - rwb.rqos.q.backing_dev_info.last_bdp_sleep (unsigned long)20 >>> prog['jiffies'] - rwb.rqos.q.backing_dev_info.last_bdp_sleep (unsigned long)12 cat wb_normal 24 cat wb_background 12 To fix this issue, we can use max_depth in wbt_rqw_done(), so that the handling of wb_recent_wait by wbt_rqw_done() and get_limit() will also be consistent, which is more reasonable. Signed-off-by: Julian Sun <sunjunchao(a)bytedance.com> Fixes: e34cbd307477 ("blk-wbt: add general throttling mechanism") --- block/blk-wbt.c | 2 ++ 1 file changed, 2 insertions(+) diff --git a/block/blk-wbt.c b/block/blk-wbt.c index a50d4cd55f41..d6a2782d442f 100644 --- a/block/blk-wbt.c +++ b/block/blk-wbt.c @@ -210,6 +210,8 @@ static void wbt_rqw_done(struct rq_wb *rwb, struct rq_wait *rqw, else if (blk_queue_write_cache(rwb->rqos.disk->queue) && !wb_recent_wait(rwb)) limit = 0; + else if (wb_recent_wait(rwb)) + limit = rwb->rq_depth.max_depth; else limit = rwb->wb_normal; -- 2.20.1

1 month

4
4
0 0

[PATCH] drm/mediatek: Fix device/node reference count leaks in mtk_drm_get_all_drm_priv

by Ma Ke

Using device_find_child() and of_find_device_by_node() to locate devices could cause an imbalance in the device's reference count. device_find_child() and of_find_device_by_node() both call get_device() to increment the reference count of the found device before returning the pointer. In mtk_drm_get_all_drm_priv(), these references are never released through put_device(), resulting in permanent reference count increments. Additionally, the for_each_child_of_node() iterator fails to release node references in all code paths. This leaks device node references when loop termination occurs before reaching MAX_CRTC. These reference count leaks may prevent device/node resources from being properly released during driver unbind operations. As comment of device_find_child() says, 'NOTE: you will need to drop the reference with put_device() after use'. Found by code review. Cc: stable(a)vger.kernel.org Fixes: 1ef7ed48356c ("drm/mediatek: Modify mediatek-drm for mt8195 multi mmsys support") Signed-off-by: Ma Ke <make24(a)iscas.ac.cn> --- drivers/gpu/drm/mediatek/mtk_drm_drv.c | 27 +++++++++++++++++--------- 1 file changed, 18 insertions(+), 9 deletions(-) diff --git a/drivers/gpu/drm/mediatek/mtk_drm_drv.c b/drivers/gpu/drm/mediatek/mtk_drm_drv.c index 7c0c12dde488..c78186debd3e 100644 --- a/drivers/gpu/drm/mediatek/mtk_drm_drv.c +++ b/drivers/gpu/drm/mediatek/mtk_drm_drv.c @@ -388,19 +388,24 @@ static bool mtk_drm_get_all_drm_priv(struct device *dev) of_id = of_match_node(mtk_drm_of_ids, node); if (!of_id) - continue; + goto next; pdev = of_find_device_by_node(node); if (!pdev) - continue; + goto next; drm_dev = device_find_child(&pdev->dev, NULL, mtk_drm_match); - if (!drm_dev) - continue; + if (!drm_dev) { + put_device(&pdev->dev); + goto next; + } temp_drm_priv = dev_get_drvdata(drm_dev); - if (!temp_drm_priv) - continue; + if (!temp_drm_priv) { + put_device(drm_dev); + put_device(&pdev->dev); + goto next; + } if (temp_drm_priv->data->main_len) all_drm_priv[CRTC_MAIN] = temp_drm_priv; @@ -412,10 +417,14 @@ static bool mtk_drm_get_all_drm_priv(struct device *dev) if (temp_drm_priv->mtk_drm_bound) cnt++; - if (cnt == MAX_CRTC) { - of_node_put(node); + put_device(drm_dev); + put_device(&pdev->dev); + +next: + of_node_put(node); + + if (cnt == MAX_CRTC) break; - } } if (drm_priv->data->mmsys_dev_num == cnt) { -- 2.25.1

1 month

2
1
0 0

2025

2024

2023

2022

2021

2020

2019

2018

2017

Linux-stable-mirror August 2025