August 2025 - Linux-stable-mirror

[tip: x86/entry] x86/fred: Remove ENDBR64 from FRED entry points

by tip-bot2 for Xin Li (Intel)

The following commit has been merged into the x86/entry branch of tip: Commit-ID: 3da01ffe1aeaa0d427ab5235ba735226670a80d9 Gitweb: https://git.kernel.org/tip/3da01ffe1aeaa0d427ab5235ba735226670a80d9 Author: Xin Li (Intel) <xin(a)zytor.com> AuthorDate: Tue, 15 Jul 2025 23:33:20 -07:00 Committer: Dave Hansen <dave.hansen(a)linux.intel.com> CommitterDate: Wed, 13 Aug 2025 15:05:32 -07:00 x86/fred: Remove ENDBR64 from FRED entry points The FRED specification has been changed in v9.0 to state that there is no need for FRED event handlers to begin with ENDBR64, because in the presence of supervisor indirect branch tracking, FRED event delivery does not enter the WAIT_FOR_ENDBRANCH state. As a result, remove ENDBR64 from FRED entry points. Then add ANNOTATE_NOENDBR to indicate that FRED entry points will never be used for indirect calls to suppress an objtool warning. This change implies that any indirect CALL/JMP to FRED entry points causes #CP in the presence of supervisor indirect branch tracking. Credit goes to Jennifer Miller <jmill(a)asu.edu> and other contributors from Arizona State University whose research shows that placing ENDBR at entry points has negative value thus led to this change. Note: This is obviously an incompatible change to the FRED architecture. But, it's OK because there no FRED systems out in the wild today. All production hardware and late pre-production hardware will follow the FRED v9 spec and be compatible with this approach. [ dhansen: add note to changelog about incompatibility ] Fixes: 14619d912b65 ("x86/fred: FRED entry/exit and dispatch code") Signed-off-by: Xin Li (Intel) <xin(a)zytor.com> Signed-off-by: Dave Hansen <dave.hansen(a)linux.intel.com> Reviewed-by: H. Peter Anvin (Intel) <hpa(a)zytor.com> Reviewed-by: Andrew Cooper <andrew.cooper3(a)citrix.com> Link: https://lore.kernel.org/linux-hardening/Z60NwR4w%2F28Z7XUa@ubun/ Cc:stable@vger.kernel.org Link: https://lore.kernel.org/all/20250716063320.1337818-1-xin%40zytor.com --- arch/x86/entry/entry_64_fred.S | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/arch/x86/entry/entry_64_fred.S b/arch/x86/entry/entry_64_fred.S index 29c5c32..907bd23 100644 --- a/arch/x86/entry/entry_64_fred.S +++ b/arch/x86/entry/entry_64_fred.S @@ -16,7 +16,7 @@ .macro FRED_ENTER UNWIND_HINT_END_OF_STACK - ENDBR + ANNOTATE_NOENDBR PUSH_AND_CLEAR_REGS movq %rsp, %rdi /* %rdi -> pt_regs */ .endm

3 weeks, 6 days

1
0
0 0

Re: [PATCH 6.15 000/480] 6.15.10-rc1 review

by Ron Economos

On 8/13/25 10:25, Jon Hunter wrote: > On Wed, Aug 13, 2025 at 08:48:28AM -0700, Jon Hunter wrote: >> On Tue, 12 Aug 2025 19:43:28 +0200, Greg Kroah-Hartman wrote: >>> This is the start of the stable review cycle for the 6.15.10 release. >>> There are 480 patches in this series, all will be posted as a response >>> to this one. If anyone has any issues with these being applied, please >>> let me know. >>> >>> Responses should be made by Thu, 14 Aug 2025 17:42:20 +0000. >>> Anything received after that time might be too late. >>> >>> The whole patch series can be found in one patch at: >>> https://www.kernel.org/pub/linux/kernel/v6.x/stable-review/patch-6.15.10-rc… >>> or in the git tree and branch at: >>> git://git.kernel.org/pub/scm/linux/kernel/git/stable/linux-stable-rc.git linux-6.15.y >>> and the diffstat can be found below. >>> >>> thanks, >>> >>> greg k-h >> Failures detected for Tegra ... >> >> Test results for stable-v6.15: >> 10 builds: 10 pass, 0 fail >> 28 boots: 28 pass, 0 fail >> 120 tests: 119 pass, 1 fail >> >> Linux version: 6.15.10-rc1-g2510f67e2e34 >> Boards tested: tegra124-jetson-tk1, tegra186-p2771-0000, >> tegra186-p3509-0000+p3636-0001, tegra194-p2972-0000, >> tegra194-p3509-0000+p3668-0000, tegra20-ventana, >> tegra210-p2371-2180, tegra210-p3450-0000, >> tegra30-cardhu-a04 >> >> Test failures: tegra194-p2972-0000: boot.py > I am seeing the following kernel warning for both linux-6.15.y and linux-6.16.y … > > WARNING KERN sched: DL replenish lagged too much > > I believe that this is introduced by … > > Peter Zijlstra <peterz(a)infradead.org> > sched/deadline: Less agressive dl_server handling > > This has been reported here: https://lore.kernel.org/all/CAMuHMdXn4z1pioTtBGMfQM0jsLviqS2jwysaWXpoLxWYoG… > > Jon Seeing this kernel warning on RISC-V also.

3 weeks, 6 days

1
0
0 0

[PATCH v3 1/1] x86/fred: Remove ENDBR64 from FRED entry points

by Xin Li (Intel)

The FRED specification has been changed in v9.0 to state that there is no need for FRED event handlers to begin with ENDBR64, because in the presence of supervisor indirect branch tracking, FRED event delivery does not enter the WAIT_FOR_ENDBRANCH state. As a result, remove ENDBR64 from FRED entry points. Then add ANNOTATE_NOENDBR to indicate that FRED entry points will never be used for indirect calls to suppress an objtool warning. This change implies that any indirect CALL/JMP to FRED entry points causes #CP in the presence of supervisor indirect branch tracking. Credit goes to Jennifer Miller <jmill(a)asu.edu> and other contributors from Arizona State University whose research shows that placing ENDBR at entry points has negative value thus led to this change. Fixes: 14619d912b65 ("x86/fred: FRED entry/exit and dispatch code") Link: https://lore.kernel.org/linux-hardening/Z60NwR4w%2F28Z7XUa@ubun/ Reviewed-by: H. Peter Anvin (Intel) <hpa(a)zytor.com> Reviewed-by: Andrew Cooper <andrew.cooper3(a)citrix.com> Signed-off-by: Xin Li (Intel) <xin(a)zytor.com> Cc: Jennifer Miller <jmill(a)asu.edu> Cc: Peter Zijlstra <peterz(a)infradead.org> Cc: Andrew Cooper <andrew.cooper3(a)citrix.com> Cc: H. Peter Anvin <hpa(a)zytor.com> Cc: stable(a)vger.kernel.org # v6.9+ --- Change in v3: *) Revise the FRED spec change description to clearly indicate that it deviates from previous versions and is based on new research showing that placing ENDBR at entry points has negative value (Andrew Cooper). Change in v2: *) CC stable and add a fixes tag (PeterZ). --- arch/x86/entry/entry_64_fred.S | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/arch/x86/entry/entry_64_fred.S b/arch/x86/entry/entry_64_fred.S index 29c5c32c16c3..907bd233c6c1 100644 --- a/arch/x86/entry/entry_64_fred.S +++ b/arch/x86/entry/entry_64_fred.S @@ -16,7 +16,7 @@ .macro FRED_ENTER UNWIND_HINT_END_OF_STACK - ENDBR + ANNOTATE_NOENDBR PUSH_AND_CLEAR_REGS movq %rsp, %rdi /* %rdi -> pt_regs */ .endm -- 2.50.1

3 weeks, 6 days

4
3
0 0

[PATCH] Revert "ata: libata-scsi: Improve CDL control"

by Igor Pylypiv

This reverts commit 17e897a456752ec9c2d7afb3d9baf268b442451b. The extra checks for the ATA_DFLAG_CDL_ENABLED flag prevent SET FEATURES command from being issued to a drive when NCQ commands are active. ata_mselect_control_ata_feature() sets / clears the ATA_DFLAG_CDL_ENABLED flag during the translation of MODE SELECT to SET FEATURES. If SET FEATURES gets deferred due to outstanding NCQ commands, the original MODE SELECT command will be re-queued. When the re-queued MODE SELECT goes through the ata_mselect_control_ata_feature() translation again, SET FEATURES will not be issued because ATA_DFLAG_CDL_ENABLED has been already set or cleared by the initial translation of MODE SELECT. The ATA_DFLAG_CDL_ENABLED checks in ata_mselect_control_ata_feature() are safe to remove because scsi_cdl_enable() implements a similar logic that avoids enabling CDL if it has been already enabled. Cc: stable(a)vger.kernel.org Signed-off-by: Igor Pylypiv <ipylypiv(a)google.com> --- drivers/ata/libata-scsi.c | 14 ++------------ 1 file changed, 2 insertions(+), 12 deletions(-) diff --git a/drivers/ata/libata-scsi.c b/drivers/ata/libata-scsi.c index 57f674f51b0c..856eabfd5a17 100644 --- a/drivers/ata/libata-scsi.c +++ b/drivers/ata/libata-scsi.c @@ -3904,27 +3904,17 @@ static int ata_mselect_control_ata_feature(struct ata_queued_cmd *qc, /* Check cdl_ctrl */ switch (buf[0] & 0x03) { case 0: - /* Disable CDL if it is enabled */ - if (!(dev->flags & ATA_DFLAG_CDL_ENABLED)) - return 0; - ata_dev_dbg(dev, "Disabling CDL\n"); + /* Disable CDL */ cdl_action = 0; dev->flags &= ~ATA_DFLAG_CDL_ENABLED; break; case 0x02: - /* - * Enable CDL if not already enabled. Since this is mutually - * exclusive with NCQ priority, allow this only if NCQ priority - * is disabled. - */ - if (dev->flags & ATA_DFLAG_CDL_ENABLED) - return 0; + /* Enable CDL T2A/T2B: NCQ priority must be disabled */ if (dev->flags & ATA_DFLAG_NCQ_PRIO_ENABLED) { ata_dev_err(dev, "NCQ priority must be disabled to enable CDL\n"); return -EINVAL; } - ata_dev_dbg(dev, "Enabling CDL\n"); cdl_action = 1; dev->flags |= ATA_DFLAG_CDL_ENABLED; break; -- 2.51.0.rc0.215.g125493bb4a-goog

3 weeks, 6 days

1
0
0 0

FAILED: patch "[PATCH] s390/mm: Remove possible false-positive warning in" failed to apply to 6.6-stable tree

by gregkh＠linuxfoundation.org

The patch below does not apply to the 6.6-stable tree. If someone wants it applied there, or to any other stable or longterm tree, then please email the backport, including the original git commit id to <stable(a)vger.kernel.org>. To reproduce the conflict and resubmit, you may use the following commands: git fetch https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git/ linux-6.6.y git checkout FETCH_HEAD git cherry-pick -x 5647f61ad9171e8f025558ed6dc5702c56a33ba3 # <resolve conflicts, build, test, etc.> git commit -s git send-email --to '<stable(a)vger.kernel.org>' --in-reply-to '2025081255-shabby-impound-4a47@gregkh' --subject-prefix 'PATCH 6.6.y' HEAD^.. Possible dependencies: thanks, greg k-h ------------------ original commit in Linus's tree ------------------ From 5647f61ad9171e8f025558ed6dc5702c56a33ba3 Mon Sep 17 00:00:00 2001 From: Gerald Schaefer <gerald.schaefer(a)linux.ibm.com> Date: Wed, 9 Jul 2025 20:34:30 +0200 Subject: [PATCH] s390/mm: Remove possible false-positive warning in pte_free_defer() Commit 8211dad627981 ("s390: add pte_free_defer() for pgtables sharing page") added a warning to pte_free_defer(), on our request. It was meant to warn if this would ever be reached for KVM guest mappings, because the page table would be freed w/o a gmap_unlink(). THP mappings are not allowed for KVM guests on s390, so this should never happen. However, it is possible that the warning is triggered in a valid case as false-positive. s390_enable_sie() takes the mmap_lock, marks all VMAs as VM_NOHUGEPAGE and splits possibly existing THP guest mappings. mm->context.has_pgste is set to 1 before that, to prevent races with the mm_has_pgste() check in MADV_HUGEPAGE. khugepaged drops the mmap_lock for file mappings and might run in parallel, before a vma is marked VM_NOHUGEPAGE, but after mm->context.has_pgste was set to 1. If it finds file mappings to collapse, it will eventually call pte_free_defer(). This will trigger the warning, but it is a valid case because gmap is not yet set up, and the THP mappings will be split again. Therefore, remove the warning and the comment. Fixes: 8211dad627981 ("s390: add pte_free_defer() for pgtables sharing page") Cc: <stable(a)vger.kernel.org> # 6.6+ Reviewed-by: Alexander Gordeev <agordeev(a)linux.ibm.com> Reviewed-by: Claudio Imbrenda <imbrenda(a)linux.ibm.com> Signed-off-by: Gerald Schaefer <gerald.schaefer(a)linux.ibm.com> Signed-off-by: Alexander Gordeev <agordeev(a)linux.ibm.com> diff --git a/arch/s390/mm/pgalloc.c b/arch/s390/mm/pgalloc.c index b449fd2605b0..d2f6f1f6d2fc 100644 --- a/arch/s390/mm/pgalloc.c +++ b/arch/s390/mm/pgalloc.c @@ -173,11 +173,6 @@ void pte_free_defer(struct mm_struct *mm, pgtable_t pgtable) struct ptdesc *ptdesc = virt_to_ptdesc(pgtable); call_rcu(&ptdesc->pt_rcu_head, pte_free_now); - /* - * THPs are not allowed for KVM guests. Warn if pgste ever reaches here. - * Turn to the generic pte_free_defer() version once gmap is removed. - */ - WARN_ON_ONCE(mm_has_pgste(mm)); } #endif /* CONFIG_TRANSPARENT_HUGEPAGE */

3 weeks, 6 days

2
1
0 0

FAILED: patch "[PATCH] x86/fpu: Delay instruction pointer fixup until after warning" failed to apply to 5.4-stable tree

by gregkh＠linuxfoundation.org

The patch below does not apply to the 5.4-stable tree. If someone wants it applied there, or to any other stable or longterm tree, then please email the backport, including the original git commit id to <stable(a)vger.kernel.org>. To reproduce the conflict and resubmit, you may use the following commands: git fetch https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git/ linux-5.4.y git checkout FETCH_HEAD git cherry-pick -x 1cec9ac2d071cfd2da562241aab0ef701355762a # <resolve conflicts, build, test, etc.> git commit -s git send-email --to '<stable(a)vger.kernel.org>' --in-reply-to '2025081252-serotonin-cranium-3e92@gregkh' --subject-prefix 'PATCH 5.4.y' HEAD^.. Possible dependencies: thanks, greg k-h ------------------ original commit in Linus's tree ------------------ From 1cec9ac2d071cfd2da562241aab0ef701355762a Mon Sep 17 00:00:00 2001 From: Dave Hansen <dave.hansen(a)linux.intel.com> Date: Tue, 24 Jun 2025 14:01:48 -0700 Subject: [PATCH] x86/fpu: Delay instruction pointer fixup until after warning Right now, if XRSTOR fails a console message like this is be printed: Bad FPU state detected at restore_fpregs_from_fpstate+0x9a/0x170, reinitializing FPU registers. However, the text location (...+0x9a in this case) is the instruction *AFTER* the XRSTOR. The highlighted instruction in the "Code:" dump also points one instruction late. The reason is that the "fixup" moves RIP up to pass the bad XRSTOR and keep on running after returning from the #GP handler. But it does this fixup before warning. The resulting warning output is nonsensical because it looks like the non-FPU-related instruction is #GP'ing. Do not fix up RIP until after printing the warning. Do this by using the more generic and standard ex_handler_default(). Fixes: d5c8028b4788 ("x86/fpu: Reinitialize FPU registers if restoring FPU state fails") Signed-off-by: Dave Hansen <dave.hansen(a)linux.intel.com> Reviewed-by: Chao Gao <chao.gao(a)intel.com> Acked-by: Alison Schofield <alison.schofield(a)intel.com> Acked-by: Peter Zijlstra (Intel) <peterz(a)infradead.org> Cc:stable@vger.kernel.org Link: https://lore.kernel.org/all/20250624210148.97126F9E%40davehans-spike.ostc.i… diff --git a/arch/x86/mm/extable.c b/arch/x86/mm/extable.c index bf8dab18be97..2fdc1f1f5adb 100644 --- a/arch/x86/mm/extable.c +++ b/arch/x86/mm/extable.c @@ -122,13 +122,12 @@ static bool ex_handler_sgx(const struct exception_table_entry *fixup, static bool ex_handler_fprestore(const struct exception_table_entry *fixup, struct pt_regs *regs) { - regs->ip = ex_fixup_addr(fixup); - WARN_ONCE(1, "Bad FPU state detected at %pB, reinitializing FPU registers.", (void *)instruction_pointer(regs)); fpu_reset_from_exception_fixup(); - return true; + + return ex_handler_default(fixup, regs); } /*

3 weeks, 6 days

2
1
0 0

FAILED: patch "[PATCH] x86/fpu: Delay instruction pointer fixup until after warning" failed to apply to 5.10-stable tree

by gregkh＠linuxfoundation.org

The patch below does not apply to the 5.10-stable tree. If someone wants it applied there, or to any other stable or longterm tree, then please email the backport, including the original git commit id to <stable(a)vger.kernel.org>. To reproduce the conflict and resubmit, you may use the following commands: git fetch https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git/ linux-5.10.y git checkout FETCH_HEAD git cherry-pick -x 1cec9ac2d071cfd2da562241aab0ef701355762a # <resolve conflicts, build, test, etc.> git commit -s git send-email --to '<stable(a)vger.kernel.org>' --in-reply-to '2025081251-sitter-agreed-26a4@gregkh' --subject-prefix 'PATCH 5.10.y' HEAD^.. Possible dependencies: thanks, greg k-h ------------------ original commit in Linus's tree ------------------ From 1cec9ac2d071cfd2da562241aab0ef701355762a Mon Sep 17 00:00:00 2001 From: Dave Hansen <dave.hansen(a)linux.intel.com> Date: Tue, 24 Jun 2025 14:01:48 -0700 Subject: [PATCH] x86/fpu: Delay instruction pointer fixup until after warning Right now, if XRSTOR fails a console message like this is be printed: Bad FPU state detected at restore_fpregs_from_fpstate+0x9a/0x170, reinitializing FPU registers. However, the text location (...+0x9a in this case) is the instruction *AFTER* the XRSTOR. The highlighted instruction in the "Code:" dump also points one instruction late. The reason is that the "fixup" moves RIP up to pass the bad XRSTOR and keep on running after returning from the #GP handler. But it does this fixup before warning. The resulting warning output is nonsensical because it looks like the non-FPU-related instruction is #GP'ing. Do not fix up RIP until after printing the warning. Do this by using the more generic and standard ex_handler_default(). Fixes: d5c8028b4788 ("x86/fpu: Reinitialize FPU registers if restoring FPU state fails") Signed-off-by: Dave Hansen <dave.hansen(a)linux.intel.com> Reviewed-by: Chao Gao <chao.gao(a)intel.com> Acked-by: Alison Schofield <alison.schofield(a)intel.com> Acked-by: Peter Zijlstra (Intel) <peterz(a)infradead.org> Cc:stable@vger.kernel.org Link: https://lore.kernel.org/all/20250624210148.97126F9E%40davehans-spike.ostc.i… diff --git a/arch/x86/mm/extable.c b/arch/x86/mm/extable.c index bf8dab18be97..2fdc1f1f5adb 100644 --- a/arch/x86/mm/extable.c +++ b/arch/x86/mm/extable.c @@ -122,13 +122,12 @@ static bool ex_handler_sgx(const struct exception_table_entry *fixup, static bool ex_handler_fprestore(const struct exception_table_entry *fixup, struct pt_regs *regs) { - regs->ip = ex_fixup_addr(fixup); - WARN_ONCE(1, "Bad FPU state detected at %pB, reinitializing FPU registers.", (void *)instruction_pointer(regs)); fpu_reset_from_exception_fixup(); - return true; + + return ex_handler_default(fixup, regs); } /*

3 weeks, 6 days

2
1
0 0

FAILED: patch "[PATCH] x86/fpu: Delay instruction pointer fixup until after warning" failed to apply to 5.15-stable tree

by gregkh＠linuxfoundation.org

The patch below does not apply to the 5.15-stable tree. If someone wants it applied there, or to any other stable or longterm tree, then please email the backport, including the original git commit id to <stable(a)vger.kernel.org>. To reproduce the conflict and resubmit, you may use the following commands: git fetch https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git/ linux-5.15.y git checkout FETCH_HEAD git cherry-pick -x 1cec9ac2d071cfd2da562241aab0ef701355762a # <resolve conflicts, build, test, etc.> git commit -s git send-email --to '<stable(a)vger.kernel.org>' --in-reply-to '2025081250-ominous-saddling-5ac5@gregkh' --subject-prefix 'PATCH 5.15.y' HEAD^.. Possible dependencies: thanks, greg k-h ------------------ original commit in Linus's tree ------------------ From 1cec9ac2d071cfd2da562241aab0ef701355762a Mon Sep 17 00:00:00 2001 From: Dave Hansen <dave.hansen(a)linux.intel.com> Date: Tue, 24 Jun 2025 14:01:48 -0700 Subject: [PATCH] x86/fpu: Delay instruction pointer fixup until after warning Right now, if XRSTOR fails a console message like this is be printed: Bad FPU state detected at restore_fpregs_from_fpstate+0x9a/0x170, reinitializing FPU registers. However, the text location (...+0x9a in this case) is the instruction *AFTER* the XRSTOR. The highlighted instruction in the "Code:" dump also points one instruction late. The reason is that the "fixup" moves RIP up to pass the bad XRSTOR and keep on running after returning from the #GP handler. But it does this fixup before warning. The resulting warning output is nonsensical because it looks like the non-FPU-related instruction is #GP'ing. Do not fix up RIP until after printing the warning. Do this by using the more generic and standard ex_handler_default(). Fixes: d5c8028b4788 ("x86/fpu: Reinitialize FPU registers if restoring FPU state fails") Signed-off-by: Dave Hansen <dave.hansen(a)linux.intel.com> Reviewed-by: Chao Gao <chao.gao(a)intel.com> Acked-by: Alison Schofield <alison.schofield(a)intel.com> Acked-by: Peter Zijlstra (Intel) <peterz(a)infradead.org> Cc:stable@vger.kernel.org Link: https://lore.kernel.org/all/20250624210148.97126F9E%40davehans-spike.ostc.i… diff --git a/arch/x86/mm/extable.c b/arch/x86/mm/extable.c index bf8dab18be97..2fdc1f1f5adb 100644 --- a/arch/x86/mm/extable.c +++ b/arch/x86/mm/extable.c @@ -122,13 +122,12 @@ static bool ex_handler_sgx(const struct exception_table_entry *fixup, static bool ex_handler_fprestore(const struct exception_table_entry *fixup, struct pt_regs *regs) { - regs->ip = ex_fixup_addr(fixup); - WARN_ONCE(1, "Bad FPU state detected at %pB, reinitializing FPU registers.", (void *)instruction_pointer(regs)); fpu_reset_from_exception_fixup(); - return true; + + return ex_handler_default(fixup, regs); } /*

3 weeks, 6 days

2
1
0 0

FAILED: patch "[PATCH] ALSA: scarlett2: Add retry on -EPROTO from scarlett2_usb_tx()" failed to apply to 5.10-stable tree

by gregkh＠linuxfoundation.org

The patch below does not apply to the 5.10-stable tree. If someone wants it applied there, or to any other stable or longterm tree, then please email the backport, including the original git commit id to <stable(a)vger.kernel.org>. To reproduce the conflict and resubmit, you may use the following commands: git fetch https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git/ linux-5.10.y git checkout FETCH_HEAD git cherry-pick -x 8a15ca0ca51399b652b1bbb23b590b220cf03d62 # <resolve conflicts, build, test, etc.> git commit -s git send-email --to '<stable(a)vger.kernel.org>' --in-reply-to '2025081244-epileptic-value-7d4e@gregkh' --subject-prefix 'PATCH 5.10.y' HEAD^.. Possible dependencies: thanks, greg k-h ------------------ original commit in Linus's tree ------------------ From 8a15ca0ca51399b652b1bbb23b590b220cf03d62 Mon Sep 17 00:00:00 2001 From: "Geoffrey D. Bennett" <g(a)b4.vu> Date: Mon, 28 Jul 2025 19:00:35 +0930 Subject: [PATCH] ALSA: scarlett2: Add retry on -EPROTO from scarlett2_usb_tx() During communication with Focusrite Scarlett Gen 2/3/4 USB audio interfaces, -EPROTO is sometimes returned from scarlett2_usb_tx(), snd_usb_ctl_msg() which can cause initialisation and control operations to fail intermittently. This patch adds up to 5 retries in scarlett2_usb(), with a delay starting at 5ms and doubling each time. This follows the same approach as the fix for usb_set_interface() in endpoint.c (commit f406005e162b ("ALSA: usb-audio: Add retry on -EPROTO from usb_set_interface()")), which resolved similar -EPROTO issues during device initialisation, and is the same approach as in fcp.c:fcp_usb(). Fixes: 9e4d5c1be21f ("ALSA: usb-audio: Scarlett Gen 2 mixer interface") Closes: https://github.com/geoffreybennett/linux-fcp/issues/41 Cc: stable(a)vger.kernel.org Signed-off-by: Geoffrey D. Bennett <g(a)b4.vu> Link: https://patch.msgid.link/aIdDO6ld50WQwNim@m.b4.vu Signed-off-by: Takashi Iwai <tiwai(a)suse.de> diff --git a/sound/usb/mixer_scarlett2.c b/sound/usb/mixer_scarlett2.c index 49eeb1444dce..15bbdafc4894 100644 --- a/sound/usb/mixer_scarlett2.c +++ b/sound/usb/mixer_scarlett2.c @@ -2351,6 +2351,8 @@ static int scarlett2_usb( struct scarlett2_usb_packet *req, *resp = NULL; size_t req_buf_size = struct_size(req, data, req_size); size_t resp_buf_size = struct_size(resp, data, resp_size); + int retries = 0; + const int max_retries = 5; int err; req = kmalloc(req_buf_size, GFP_KERNEL); @@ -2374,10 +2376,15 @@ static int scarlett2_usb( if (req_size) memcpy(req->data, req_data, req_size); +retry: err = scarlett2_usb_tx(dev, private->bInterfaceNumber, req, req_buf_size); if (err != req_buf_size) { + if (err == -EPROTO && ++retries <= max_retries) { + msleep(5 * (1 << (retries - 1))); + goto retry; + } usb_audio_err( mixer->chip, "%s USB request result cmd %x was %d\n",

3 weeks, 6 days

2
1
0 0

[PATCH v2 2/3] fuse: prevent overflow in copy_file_range return value

by Miklos Szeredi

The FUSE protocol uses struct fuse_write_out to convey the return value of copy_file_range, which is restricted to uint32_t. But the COPY_FILE_RANGE interface supports a 64-bit size copies. Currently the number of bytes copied is silently truncated to 32-bit, which may result in poor performance or even failure to copy in case of truncation to zero. Reported-by: Florian Weimer <fweimer(a)redhat.com> Closes: https://lore.kernel.org/all/lhuh5ynl8z5.fsf@oldenburg.str.redhat.com/ Fixes: 88bc7d5097a1 ("fuse: add support for copy_file_range()") Cc: <stable(a)vger.kernel.org> # v4.20 Signed-off-by: Miklos Szeredi <mszeredi(a)redhat.com> --- fs/fuse/file.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/fs/fuse/file.c b/fs/fuse/file.c index 45207a6bb85f..4adcf09d4b01 100644 --- a/fs/fuse/file.c +++ b/fs/fuse/file.c @@ -2960,7 +2960,7 @@ static ssize_t __fuse_copy_file_range(struct file *file_in, loff_t pos_in, .nodeid_out = ff_out->nodeid, .fh_out = ff_out->fh, .off_out = pos_out, - .len = len, + .len = min_t(size_t, len, UINT_MAX & PAGE_MASK), .flags = flags }; struct fuse_write_out outarg; -- 2.49.0

3 weeks, 6 days

1
0
0 0

2025

2024

2023

2022

2021

2020

2019

2018

2017

Linux-stable-mirror August 2025