May 2025 - Linux-stable-mirror

[PATCH V2] LoongArch: Avoid using $r0/$r1 as "mask" for csrxchg

by Huacai Chen

When building kernel with LLVM there are occasionally such errors: In file included from ./include/linux/spinlock.h:59: In file included from ./include/linux/irqflags.h:17: arch/loongarch/include/asm/irqflags.h:38:3: error: must not be $r0 or $r1 38 | "csrxchg %[val], %[mask], %[reg]\n\t" | ^ <inline asm>:1:16: note: instantiated into assembly here 1 | csrxchg $a1, $ra, 0 | ^ To prevent the compiler from allocating $r0 or $r1 for the "mask" of the csrxchg instruction, the 'q' constraint must be used but Clang < 22 does not support it. So force to use $t0 in the inline asm, in order to avoid using $r0/$r1 while keeping the backward compatibility. Cc: stable(a)vger.kernel.org Link: https://github.com/llvm/llvm-project/pull/141037 Reviewed-by: Yanteng Si <si.yanteng(a)linux.dev> Suggested-by: WANG Rui <wangrui(a)loongson.cn> Signed-off-by: Huacai Chen <chenhuacai(a)loongson.cn> --- V2: Update commit messages. arch/loongarch/include/asm/irqflags.h | 16 ++++++++++++---- 1 file changed, 12 insertions(+), 4 deletions(-) diff --git a/arch/loongarch/include/asm/irqflags.h b/arch/loongarch/include/asm/irqflags.h index 319a8c616f1f..003172b8406b 100644 --- a/arch/loongarch/include/asm/irqflags.h +++ b/arch/loongarch/include/asm/irqflags.h @@ -14,40 +14,48 @@ static inline void arch_local_irq_enable(void) { u32 flags = CSR_CRMD_IE; + register u32 mask asm("t0") = CSR_CRMD_IE; + __asm__ __volatile__( "csrxchg %[val], %[mask], %[reg]\n\t" : [val] "+r" (flags) - : [mask] "r" (CSR_CRMD_IE), [reg] "i" (LOONGARCH_CSR_CRMD) + : [mask] "r" (mask), [reg] "i" (LOONGARCH_CSR_CRMD) : "memory"); } static inline void arch_local_irq_disable(void) { u32 flags = 0; + register u32 mask asm("t0") = CSR_CRMD_IE; + __asm__ __volatile__( "csrxchg %[val], %[mask], %[reg]\n\t" : [val] "+r" (flags) - : [mask] "r" (CSR_CRMD_IE), [reg] "i" (LOONGARCH_CSR_CRMD) + : [mask] "r" (mask), [reg] "i" (LOONGARCH_CSR_CRMD) : "memory"); } static inline unsigned long arch_local_irq_save(void) { u32 flags = 0; + register u32 mask asm("t0") = CSR_CRMD_IE; + __asm__ __volatile__( "csrxchg %[val], %[mask], %[reg]\n\t" : [val] "+r" (flags) - : [mask] "r" (CSR_CRMD_IE), [reg] "i" (LOONGARCH_CSR_CRMD) + : [mask] "r" (mask), [reg] "i" (LOONGARCH_CSR_CRMD) : "memory"); return flags; } static inline void arch_local_irq_restore(unsigned long flags) { + register u32 mask asm("t0") = CSR_CRMD_IE; + __asm__ __volatile__( "csrxchg %[val], %[mask], %[reg]\n\t" : [val] "+r" (flags) - : [mask] "r" (CSR_CRMD_IE), [reg] "i" (LOONGARCH_CSR_CRMD) + : [mask] "r" (mask), [reg] "i" (LOONGARCH_CSR_CRMD) : "memory"); } -- 2.47.1

6 months, 3 weeks

3
2
0 0

Re: [syzbot] [kernel?] KASAN: slab-use-after-free Write in binder_remove_device

by syzbot

syzbot has bisected this issue to: commit 12d909cac1e1c4147cc3417fee804ee12fc6b984 Author: Li Li <dualli(a)google.com> Date: Wed Dec 18 21:29:34 2024 +0000 binderfs: add new binder devices to binder_devices bisection log: https://syzkaller.appspot.com/x/bisect.txt?x=107228e8580000 start commit: 176e917e010c Add linux-next specific files for 20250523 git tree: linux-next final oops: https://syzkaller.appspot.com/x/report.txt?x=127228e8580000 console output: https://syzkaller.appspot.com/x/log.txt?x=147228e8580000 kernel config: https://syzkaller.appspot.com/x/.config?x=e7902c752bef748 dashboard link: https://syzkaller.appspot.com/bug?extid=4af454407ec393de51d6 syz repro: https://syzkaller.appspot.com/x/repro.syz?x=108b55f4580000 C reproducer: https://syzkaller.appspot.com/x/repro.c?x=1145e5f4580000 Reported-by: syzbot+4af454407ec393de51d6(a)syzkaller.appspotmail.com Fixes: 12d909cac1e1 ("binderfs: add new binder devices to binder_devices") For information about bisection process see: https://goo.gl/tpsmEJ#bisection

6 months, 3 weeks

1
0
0 0

FAILED: patch "[PATCH] iommu: Skip PASID validation for devices without PASID" failed to apply to 6.6-stable tree

by gregkh＠linuxfoundation.org

The patch below does not apply to the 6.6-stable tree. If someone wants it applied there, or to any other stable or longterm tree, then please email the backport, including the original git commit id to <stable(a)vger.kernel.org>. To reproduce the conflict and resubmit, you may use the following commands: git fetch https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git/ linux-6.6.y git checkout FETCH_HEAD git cherry-pick -x b3f6fcd8404f9f92262303369bb877ec5d188a81 # <resolve conflicts, build, test, etc.> git commit -s git send-email --to '<stable(a)vger.kernel.org>' --in-reply-to '2025052454-kinship-reiterate-9e47@gregkh' --subject-prefix 'PATCH 6.6.y' HEAD^.. Possible dependencies: thanks, greg k-h ------------------ original commit in Linus's tree ------------------ From b3f6fcd8404f9f92262303369bb877ec5d188a81 Mon Sep 17 00:00:00 2001 From: Tushar Dave <tdave(a)nvidia.com> Date: Mon, 19 May 2025 18:19:37 -0700 Subject: [PATCH] iommu: Skip PASID validation for devices without PASID capability Generally PASID support requires ACS settings that usually create single device groups, but there are some niche cases where we can get multi-device groups and still have working PASID support. The primary issue is that PCI switches are not required to treat PASID tagged TLPs specially so appropriate ACS settings are required to route all TLPs to the host bridge if PASID is going to work properly. pci_enable_pasid() does check that each device that will use PASID has the proper ACS settings to achieve this routing. However, no-PASID devices can be combined with PASID capable devices within the same topology using non-uniform ACS settings. In this case the no-PASID devices may not have strict route to host ACS flags and end up being grouped with the PASID devices. This configuration fails to allow use of the PASID within the iommu core code which wrongly checks if the no-PASID device supports PASID. Fix this by ignoring no-PASID devices during the PASID validation. They will never issue a PASID TLP anyhow so they can be ignored. Fixes: c404f55c26fc ("iommu: Validate the PASID in iommu_attach_device_pasid()") Cc: stable(a)vger.kernel.org Signed-off-by: Tushar Dave <tdave(a)nvidia.com> Reviewed-by: Lu Baolu <baolu.lu(a)linux.intel.com> Reviewed-by: Vasant Hegde <vasant.hegde(a)amd.com> Link: https://lore.kernel.org/r/20250520011937.3230557-1-tdave@nvidia.com Signed-off-by: Joerg Roedel <jroedel(a)suse.de> diff --git a/drivers/iommu/iommu.c b/drivers/iommu/iommu.c index 4f91a740c15f..9d728800a862 100644 --- a/drivers/iommu/iommu.c +++ b/drivers/iommu/iommu.c @@ -3366,10 +3366,12 @@ static int __iommu_set_group_pasid(struct iommu_domain *domain, int ret; for_each_group_device(group, device) { - ret = domain->ops->set_dev_pasid(domain, device->dev, - pasid, old); - if (ret) - goto err_revert; + if (device->dev->iommu->max_pasids > 0) { + ret = domain->ops->set_dev_pasid(domain, device->dev, + pasid, old); + if (ret) + goto err_revert; + } } return 0; @@ -3379,15 +3381,18 @@ static int __iommu_set_group_pasid(struct iommu_domain *domain, for_each_group_device(group, device) { if (device == last_gdev) break; - /* - * If no old domain, undo the succeeded devices/pasid. - * Otherwise, rollback the succeeded devices/pasid to the old - * domain. And it is a driver bug to fail attaching with a - * previously good domain. - */ - if (!old || WARN_ON(old->ops->set_dev_pasid(old, device->dev, + if (device->dev->iommu->max_pasids > 0) { + /* + * If no old domain, undo the succeeded devices/pasid. + * Otherwise, rollback the succeeded devices/pasid to + * the old domain. And it is a driver bug to fail + * attaching with a previously good domain. + */ + if (!old || + WARN_ON(old->ops->set_dev_pasid(old, device->dev, pasid, domain))) - iommu_remove_dev_pasid(device->dev, pasid, domain); + iommu_remove_dev_pasid(device->dev, pasid, domain); + } } return ret; } @@ -3398,8 +3403,10 @@ static void __iommu_remove_group_pasid(struct iommu_group *group, { struct group_device *device; - for_each_group_device(group, device) - iommu_remove_dev_pasid(device->dev, pasid, domain); + for_each_group_device(group, device) { + if (device->dev->iommu->max_pasids > 0) + iommu_remove_dev_pasid(device->dev, pasid, domain); + } } /* @@ -3440,7 +3447,13 @@ int iommu_attach_device_pasid(struct iommu_domain *domain, mutex_lock(&group->mutex); for_each_group_device(group, device) { - if (pasid >= device->dev->iommu->max_pasids) { + /* + * Skip PASID validation for devices without PASID support + * (max_pasids = 0). These devices cannot issue transactions + * with PASID, so they don't affect group's PASID usage. + */ + if ((device->dev->iommu->max_pasids > 0) && + (pasid >= device->dev->iommu->max_pasids)) { ret = -EINVAL; goto out_unlock; }

6 months, 3 weeks

1
0
0 0

FAILED: patch "[PATCH] iommu: Skip PASID validation for devices without PASID" failed to apply to 6.12-stable tree

by gregkh＠linuxfoundation.org

The patch below does not apply to the 6.12-stable tree. If someone wants it applied there, or to any other stable or longterm tree, then please email the backport, including the original git commit id to <stable(a)vger.kernel.org>. To reproduce the conflict and resubmit, you may use the following commands: git fetch https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git/ linux-6.12.y git checkout FETCH_HEAD git cherry-pick -x b3f6fcd8404f9f92262303369bb877ec5d188a81 # <resolve conflicts, build, test, etc.> git commit -s git send-email --to '<stable(a)vger.kernel.org>' --in-reply-to '2025052453-elastic-creature-b8c3@gregkh' --subject-prefix 'PATCH 6.12.y' HEAD^.. Possible dependencies: thanks, greg k-h ------------------ original commit in Linus's tree ------------------ From b3f6fcd8404f9f92262303369bb877ec5d188a81 Mon Sep 17 00:00:00 2001 From: Tushar Dave <tdave(a)nvidia.com> Date: Mon, 19 May 2025 18:19:37 -0700 Subject: [PATCH] iommu: Skip PASID validation for devices without PASID capability Generally PASID support requires ACS settings that usually create single device groups, but there are some niche cases where we can get multi-device groups and still have working PASID support. The primary issue is that PCI switches are not required to treat PASID tagged TLPs specially so appropriate ACS settings are required to route all TLPs to the host bridge if PASID is going to work properly. pci_enable_pasid() does check that each device that will use PASID has the proper ACS settings to achieve this routing. However, no-PASID devices can be combined with PASID capable devices within the same topology using non-uniform ACS settings. In this case the no-PASID devices may not have strict route to host ACS flags and end up being grouped with the PASID devices. This configuration fails to allow use of the PASID within the iommu core code which wrongly checks if the no-PASID device supports PASID. Fix this by ignoring no-PASID devices during the PASID validation. They will never issue a PASID TLP anyhow so they can be ignored. Fixes: c404f55c26fc ("iommu: Validate the PASID in iommu_attach_device_pasid()") Cc: stable(a)vger.kernel.org Signed-off-by: Tushar Dave <tdave(a)nvidia.com> Reviewed-by: Lu Baolu <baolu.lu(a)linux.intel.com> Reviewed-by: Vasant Hegde <vasant.hegde(a)amd.com> Link: https://lore.kernel.org/r/20250520011937.3230557-1-tdave@nvidia.com Signed-off-by: Joerg Roedel <jroedel(a)suse.de> diff --git a/drivers/iommu/iommu.c b/drivers/iommu/iommu.c index 4f91a740c15f..9d728800a862 100644 --- a/drivers/iommu/iommu.c +++ b/drivers/iommu/iommu.c @@ -3366,10 +3366,12 @@ static int __iommu_set_group_pasid(struct iommu_domain *domain, int ret; for_each_group_device(group, device) { - ret = domain->ops->set_dev_pasid(domain, device->dev, - pasid, old); - if (ret) - goto err_revert; + if (device->dev->iommu->max_pasids > 0) { + ret = domain->ops->set_dev_pasid(domain, device->dev, + pasid, old); + if (ret) + goto err_revert; + } } return 0; @@ -3379,15 +3381,18 @@ static int __iommu_set_group_pasid(struct iommu_domain *domain, for_each_group_device(group, device) { if (device == last_gdev) break; - /* - * If no old domain, undo the succeeded devices/pasid. - * Otherwise, rollback the succeeded devices/pasid to the old - * domain. And it is a driver bug to fail attaching with a - * previously good domain. - */ - if (!old || WARN_ON(old->ops->set_dev_pasid(old, device->dev, + if (device->dev->iommu->max_pasids > 0) { + /* + * If no old domain, undo the succeeded devices/pasid. + * Otherwise, rollback the succeeded devices/pasid to + * the old domain. And it is a driver bug to fail + * attaching with a previously good domain. + */ + if (!old || + WARN_ON(old->ops->set_dev_pasid(old, device->dev, pasid, domain))) - iommu_remove_dev_pasid(device->dev, pasid, domain); + iommu_remove_dev_pasid(device->dev, pasid, domain); + } } return ret; } @@ -3398,8 +3403,10 @@ static void __iommu_remove_group_pasid(struct iommu_group *group, { struct group_device *device; - for_each_group_device(group, device) - iommu_remove_dev_pasid(device->dev, pasid, domain); + for_each_group_device(group, device) { + if (device->dev->iommu->max_pasids > 0) + iommu_remove_dev_pasid(device->dev, pasid, domain); + } } /* @@ -3440,7 +3447,13 @@ int iommu_attach_device_pasid(struct iommu_domain *domain, mutex_lock(&group->mutex); for_each_group_device(group, device) { - if (pasid >= device->dev->iommu->max_pasids) { + /* + * Skip PASID validation for devices without PASID support + * (max_pasids = 0). These devices cannot issue transactions + * with PASID, so they don't affect group's PASID usage. + */ + if ((device->dev->iommu->max_pasids > 0) && + (pasid >= device->dev->iommu->max_pasids)) { ret = -EINVAL; goto out_unlock; }

6 months, 3 weeks

1
0
0 0

FAILED: patch "[PATCH] iommu: Skip PASID validation for devices without PASID" failed to apply to 6.14-stable tree

by gregkh＠linuxfoundation.org

The patch below does not apply to the 6.14-stable tree. If someone wants it applied there, or to any other stable or longterm tree, then please email the backport, including the original git commit id to <stable(a)vger.kernel.org>. To reproduce the conflict and resubmit, you may use the following commands: git fetch https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git/ linux-6.14.y git checkout FETCH_HEAD git cherry-pick -x b3f6fcd8404f9f92262303369bb877ec5d188a81 # <resolve conflicts, build, test, etc.> git commit -s git send-email --to '<stable(a)vger.kernel.org>' --in-reply-to '2025052452-sputter-outmost-ef4f@gregkh' --subject-prefix 'PATCH 6.14.y' HEAD^.. Possible dependencies: thanks, greg k-h ------------------ original commit in Linus's tree ------------------ From b3f6fcd8404f9f92262303369bb877ec5d188a81 Mon Sep 17 00:00:00 2001 From: Tushar Dave <tdave(a)nvidia.com> Date: Mon, 19 May 2025 18:19:37 -0700 Subject: [PATCH] iommu: Skip PASID validation for devices without PASID capability Generally PASID support requires ACS settings that usually create single device groups, but there are some niche cases where we can get multi-device groups and still have working PASID support. The primary issue is that PCI switches are not required to treat PASID tagged TLPs specially so appropriate ACS settings are required to route all TLPs to the host bridge if PASID is going to work properly. pci_enable_pasid() does check that each device that will use PASID has the proper ACS settings to achieve this routing. However, no-PASID devices can be combined with PASID capable devices within the same topology using non-uniform ACS settings. In this case the no-PASID devices may not have strict route to host ACS flags and end up being grouped with the PASID devices. This configuration fails to allow use of the PASID within the iommu core code which wrongly checks if the no-PASID device supports PASID. Fix this by ignoring no-PASID devices during the PASID validation. They will never issue a PASID TLP anyhow so they can be ignored. Fixes: c404f55c26fc ("iommu: Validate the PASID in iommu_attach_device_pasid()") Cc: stable(a)vger.kernel.org Signed-off-by: Tushar Dave <tdave(a)nvidia.com> Reviewed-by: Lu Baolu <baolu.lu(a)linux.intel.com> Reviewed-by: Vasant Hegde <vasant.hegde(a)amd.com> Link: https://lore.kernel.org/r/20250520011937.3230557-1-tdave@nvidia.com Signed-off-by: Joerg Roedel <jroedel(a)suse.de> diff --git a/drivers/iommu/iommu.c b/drivers/iommu/iommu.c index 4f91a740c15f..9d728800a862 100644 --- a/drivers/iommu/iommu.c +++ b/drivers/iommu/iommu.c @@ -3366,10 +3366,12 @@ static int __iommu_set_group_pasid(struct iommu_domain *domain, int ret; for_each_group_device(group, device) { - ret = domain->ops->set_dev_pasid(domain, device->dev, - pasid, old); - if (ret) - goto err_revert; + if (device->dev->iommu->max_pasids > 0) { + ret = domain->ops->set_dev_pasid(domain, device->dev, + pasid, old); + if (ret) + goto err_revert; + } } return 0; @@ -3379,15 +3381,18 @@ static int __iommu_set_group_pasid(struct iommu_domain *domain, for_each_group_device(group, device) { if (device == last_gdev) break; - /* - * If no old domain, undo the succeeded devices/pasid. - * Otherwise, rollback the succeeded devices/pasid to the old - * domain. And it is a driver bug to fail attaching with a - * previously good domain. - */ - if (!old || WARN_ON(old->ops->set_dev_pasid(old, device->dev, + if (device->dev->iommu->max_pasids > 0) { + /* + * If no old domain, undo the succeeded devices/pasid. + * Otherwise, rollback the succeeded devices/pasid to + * the old domain. And it is a driver bug to fail + * attaching with a previously good domain. + */ + if (!old || + WARN_ON(old->ops->set_dev_pasid(old, device->dev, pasid, domain))) - iommu_remove_dev_pasid(device->dev, pasid, domain); + iommu_remove_dev_pasid(device->dev, pasid, domain); + } } return ret; } @@ -3398,8 +3403,10 @@ static void __iommu_remove_group_pasid(struct iommu_group *group, { struct group_device *device; - for_each_group_device(group, device) - iommu_remove_dev_pasid(device->dev, pasid, domain); + for_each_group_device(group, device) { + if (device->dev->iommu->max_pasids > 0) + iommu_remove_dev_pasid(device->dev, pasid, domain); + } } /* @@ -3440,7 +3447,13 @@ int iommu_attach_device_pasid(struct iommu_domain *domain, mutex_lock(&group->mutex); for_each_group_device(group, device) { - if (pasid >= device->dev->iommu->max_pasids) { + /* + * Skip PASID validation for devices without PASID support + * (max_pasids = 0). These devices cannot issue transactions + * with PASID, so they don't affect group's PASID usage. + */ + if ((device->dev->iommu->max_pasids > 0) && + (pasid >= device->dev->iommu->max_pasids)) { ret = -EINVAL; goto out_unlock; }

6 months, 3 weeks

1
0
0 0

FAILED: patch "[PATCH] arm64: dts: marvell: uDPU: define pinctrl state for alarm" failed to apply to 5.4-stable tree

by gregkh＠linuxfoundation.org

The patch below does not apply to the 5.4-stable tree. If someone wants it applied there, or to any other stable or longterm tree, then please email the backport, including the original git commit id to <stable(a)vger.kernel.org>. To reproduce the conflict and resubmit, you may use the following commands: git fetch https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git/ linux-5.4.y git checkout FETCH_HEAD git cherry-pick -x b04f0d89e880bc2cca6a5c73cf287082c91878da # <resolve conflicts, build, test, etc.> git commit -s git send-email --to '<stable(a)vger.kernel.org>' --in-reply-to '2025052403-postcard-ferocious-b503@gregkh' --subject-prefix 'PATCH 5.4.y' HEAD^.. Possible dependencies: thanks, greg k-h ------------------ original commit in Linus's tree ------------------ From b04f0d89e880bc2cca6a5c73cf287082c91878da Mon Sep 17 00:00:00 2001 From: Gabor Juhos <j4g8y7(a)gmail.com> Date: Fri, 9 May 2025 15:48:52 +0200 Subject: [PATCH] arm64: dts: marvell: uDPU: define pinctrl state for alarm LEDs The two alarm LEDs of on the uDPU board are stopped working since commit 78efa53e715e ("leds: Init leds class earlier"). The LEDs are driven by the GPIO{15,16} pins of the North Bridge GPIO controller. These pins are part of the 'spi_quad' pin group for which the 'spi' function is selected via the default pinctrl state of the 'spi' node. This is wrong however, since in order to allow controlling the LEDs, the pins should use the 'gpio' function. Before the commit mentined above, the 'spi' function is selected first by the pinctrl core before probing the spi driver, but then it gets overridden to 'gpio' implicitly via the devm_gpiod_get_index_optional() call from the 'leds-gpio' driver. After the commit, the LED subsystem gets initialized before the SPI subsystem, so the function of the pin group remains 'spi' which in turn prevents controlling of the LEDs. Despite the change of the initialization order, the root cause is that the pinctrl state definition is wrong since its initial commit 0d45062cfc89 ("arm64: dts: marvell: Add device tree for uDPU board"), To fix the problem, override the function in the 'spi_quad_pins' node to 'gpio' and move the pinctrl state definition from the 'spi' node into the 'leds' node. Cc: stable(a)vger.kernel.org # needs adjustment for < 6.1 Fixes: 0d45062cfc89 ("arm64: dts: marvell: Add device tree for uDPU board") Signed-off-by: Gabor Juhos <j4g8y7(a)gmail.com> Signed-off-by: Imre Kaloz <kaloz(a)openwrt.org> Signed-off-by: Gregory CLEMENT <gregory.clement(a)bootlin.com> diff --git a/arch/arm64/boot/dts/marvell/armada-3720-uDPU.dtsi b/arch/arm64/boot/dts/marvell/armada-3720-uDPU.dtsi index 3a9b6907185d..242820845707 100644 --- a/arch/arm64/boot/dts/marvell/armada-3720-uDPU.dtsi +++ b/arch/arm64/boot/dts/marvell/armada-3720-uDPU.dtsi @@ -26,6 +26,8 @@ memory@0 { leds { compatible = "gpio-leds"; + pinctrl-names = "default"; + pinctrl-0 = <&spi_quad_pins>; led-power1 { label = "udpu:green:power"; @@ -82,8 +84,6 @@ &sdhci0 { &spi0 { status = "okay"; - pinctrl-names = "default"; - pinctrl-0 = <&spi_quad_pins>; flash@0 { compatible = "jedec,spi-nor"; @@ -108,6 +108,10 @@ partition@180000 { }; }; +&spi_quad_pins { + function = "gpio"; +}; + &pinctrl_nb { i2c2_recovery_pins: i2c2-recovery-pins { groups = "i2c2";

6 months, 3 weeks

1
0
0 0

FAILED: patch "[PATCH] arm64: dts: marvell: uDPU: define pinctrl state for alarm" failed to apply to 6.1-stable tree

by gregkh＠linuxfoundation.org

The patch below does not apply to the 6.1-stable tree. If someone wants it applied there, or to any other stable or longterm tree, then please email the backport, including the original git commit id to <stable(a)vger.kernel.org>. To reproduce the conflict and resubmit, you may use the following commands: git fetch https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git/ linux-6.1.y git checkout FETCH_HEAD git cherry-pick -x b04f0d89e880bc2cca6a5c73cf287082c91878da # <resolve conflicts, build, test, etc.> git commit -s git send-email --to '<stable(a)vger.kernel.org>' --in-reply-to '2025052400-sneer-rendering-46c3@gregkh' --subject-prefix 'PATCH 6.1.y' HEAD^.. Possible dependencies: thanks, greg k-h ------------------ original commit in Linus's tree ------------------ From b04f0d89e880bc2cca6a5c73cf287082c91878da Mon Sep 17 00:00:00 2001 From: Gabor Juhos <j4g8y7(a)gmail.com> Date: Fri, 9 May 2025 15:48:52 +0200 Subject: [PATCH] arm64: dts: marvell: uDPU: define pinctrl state for alarm LEDs The two alarm LEDs of on the uDPU board are stopped working since commit 78efa53e715e ("leds: Init leds class earlier"). The LEDs are driven by the GPIO{15,16} pins of the North Bridge GPIO controller. These pins are part of the 'spi_quad' pin group for which the 'spi' function is selected via the default pinctrl state of the 'spi' node. This is wrong however, since in order to allow controlling the LEDs, the pins should use the 'gpio' function. Before the commit mentined above, the 'spi' function is selected first by the pinctrl core before probing the spi driver, but then it gets overridden to 'gpio' implicitly via the devm_gpiod_get_index_optional() call from the 'leds-gpio' driver. After the commit, the LED subsystem gets initialized before the SPI subsystem, so the function of the pin group remains 'spi' which in turn prevents controlling of the LEDs. Despite the change of the initialization order, the root cause is that the pinctrl state definition is wrong since its initial commit 0d45062cfc89 ("arm64: dts: marvell: Add device tree for uDPU board"), To fix the problem, override the function in the 'spi_quad_pins' node to 'gpio' and move the pinctrl state definition from the 'spi' node into the 'leds' node. Cc: stable(a)vger.kernel.org # needs adjustment for < 6.1 Fixes: 0d45062cfc89 ("arm64: dts: marvell: Add device tree for uDPU board") Signed-off-by: Gabor Juhos <j4g8y7(a)gmail.com> Signed-off-by: Imre Kaloz <kaloz(a)openwrt.org> Signed-off-by: Gregory CLEMENT <gregory.clement(a)bootlin.com> diff --git a/arch/arm64/boot/dts/marvell/armada-3720-uDPU.dtsi b/arch/arm64/boot/dts/marvell/armada-3720-uDPU.dtsi index 3a9b6907185d..242820845707 100644 --- a/arch/arm64/boot/dts/marvell/armada-3720-uDPU.dtsi +++ b/arch/arm64/boot/dts/marvell/armada-3720-uDPU.dtsi @@ -26,6 +26,8 @@ memory@0 { leds { compatible = "gpio-leds"; + pinctrl-names = "default"; + pinctrl-0 = <&spi_quad_pins>; led-power1 { label = "udpu:green:power"; @@ -82,8 +84,6 @@ &sdhci0 { &spi0 { status = "okay"; - pinctrl-names = "default"; - pinctrl-0 = <&spi_quad_pins>; flash@0 { compatible = "jedec,spi-nor"; @@ -108,6 +108,10 @@ partition@180000 { }; }; +&spi_quad_pins { + function = "gpio"; +}; + &pinctrl_nb { i2c2_recovery_pins: i2c2-recovery-pins { groups = "i2c2";

6 months, 3 weeks

1
0
0 0

FAILED: patch "[PATCH] pmdomain: core: Fix error checking in" failed to apply to 5.4-stable tree

by gregkh＠linuxfoundation.org

The patch below does not apply to the 5.4-stable tree. If someone wants it applied there, or to any other stable or longterm tree, then please email the backport, including the original git commit id to <stable(a)vger.kernel.org>. To reproduce the conflict and resubmit, you may use the following commands: git fetch https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git/ linux-5.4.y git checkout FETCH_HEAD git cherry-pick -x 0f5757667ec0aaf2456c3b76fcf0c6c3ea3591fe # <resolve conflicts, build, test, etc.> git commit -s git send-email --to '<stable(a)vger.kernel.org>' --in-reply-to '2025052400-culinary-streak-b400@gregkh' --subject-prefix 'PATCH 5.4.y' HEAD^.. Possible dependencies: thanks, greg k-h ------------------ original commit in Linus's tree ------------------ From 0f5757667ec0aaf2456c3b76fcf0c6c3ea3591fe Mon Sep 17 00:00:00 2001 From: Dan Carpenter <dan.carpenter(a)linaro.org> Date: Thu, 8 May 2025 09:29:23 +0300 Subject: [PATCH] pmdomain: core: Fix error checking in genpd_dev_pm_attach_by_id() The error checking for of_count_phandle_with_args() does not handle negative error codes correctly. The problem is that "index" is a u32 so in the condition "if (index >= num_domains)" negative error codes stored in "num_domains" are type promoted to very high positive values and "index" is always going to be valid. Test for negative error codes first and then test if "index" is valid. Fixes: 3ccf3f0cd197 ("PM / Domains: Enable genpd_dev_pm_attach_by_id|name() for single PM domain") Signed-off-by: Dan Carpenter <dan.carpenter(a)linaro.org> Cc: stable(a)vger.kernel.org Link: https://lore.kernel.org/r/aBxPQ8AI8N5v-7rL@stanley.mountain Signed-off-by: Ulf Hansson <ulf.hansson(a)linaro.org> diff --git a/drivers/pmdomain/core.c b/drivers/pmdomain/core.c index 9b2f28b34bb5..d6c1ddb807b2 100644 --- a/drivers/pmdomain/core.c +++ b/drivers/pmdomain/core.c @@ -3126,7 +3126,7 @@ struct device *genpd_dev_pm_attach_by_id(struct device *dev, /* Verify that the index is within a valid range. */ num_domains = of_count_phandle_with_args(dev->of_node, "power-domains", "#power-domain-cells"); - if (index >= num_domains) + if (num_domains < 0 || index >= num_domains) return NULL; /* Allocate and register device on the genpd bus. */

6 months, 3 weeks

1
0
0 0

FAILED: patch "[PATCH] pmdomain: core: Fix error checking in" failed to apply to 5.10-stable tree

by gregkh＠linuxfoundation.org

The patch below does not apply to the 5.10-stable tree. If someone wants it applied there, or to any other stable or longterm tree, then please email the backport, including the original git commit id to <stable(a)vger.kernel.org>. To reproduce the conflict and resubmit, you may use the following commands: git fetch https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git/ linux-5.10.y git checkout FETCH_HEAD git cherry-pick -x 0f5757667ec0aaf2456c3b76fcf0c6c3ea3591fe # <resolve conflicts, build, test, etc.> git commit -s git send-email --to '<stable(a)vger.kernel.org>' --in-reply-to '2025052459-bully-agreeing-45f1@gregkh' --subject-prefix 'PATCH 5.10.y' HEAD^.. Possible dependencies: thanks, greg k-h ------------------ original commit in Linus's tree ------------------ From 0f5757667ec0aaf2456c3b76fcf0c6c3ea3591fe Mon Sep 17 00:00:00 2001 From: Dan Carpenter <dan.carpenter(a)linaro.org> Date: Thu, 8 May 2025 09:29:23 +0300 Subject: [PATCH] pmdomain: core: Fix error checking in genpd_dev_pm_attach_by_id() The error checking for of_count_phandle_with_args() does not handle negative error codes correctly. The problem is that "index" is a u32 so in the condition "if (index >= num_domains)" negative error codes stored in "num_domains" are type promoted to very high positive values and "index" is always going to be valid. Test for negative error codes first and then test if "index" is valid. Fixes: 3ccf3f0cd197 ("PM / Domains: Enable genpd_dev_pm_attach_by_id|name() for single PM domain") Signed-off-by: Dan Carpenter <dan.carpenter(a)linaro.org> Cc: stable(a)vger.kernel.org Link: https://lore.kernel.org/r/aBxPQ8AI8N5v-7rL@stanley.mountain Signed-off-by: Ulf Hansson <ulf.hansson(a)linaro.org> diff --git a/drivers/pmdomain/core.c b/drivers/pmdomain/core.c index 9b2f28b34bb5..d6c1ddb807b2 100644 --- a/drivers/pmdomain/core.c +++ b/drivers/pmdomain/core.c @@ -3126,7 +3126,7 @@ struct device *genpd_dev_pm_attach_by_id(struct device *dev, /* Verify that the index is within a valid range. */ num_domains = of_count_phandle_with_args(dev->of_node, "power-domains", "#power-domain-cells"); - if (index >= num_domains) + if (num_domains < 0 || index >= num_domains) return NULL; /* Allocate and register device on the genpd bus. */

6 months, 3 weeks

1
0
0 0

FAILED: patch "[PATCH] pmdomain: core: Fix error checking in" failed to apply to 6.1-stable tree

by gregkh＠linuxfoundation.org

The patch below does not apply to the 6.1-stable tree. If someone wants it applied there, or to any other stable or longterm tree, then please email the backport, including the original git commit id to <stable(a)vger.kernel.org>. To reproduce the conflict and resubmit, you may use the following commands: git fetch https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git/ linux-6.1.y git checkout FETCH_HEAD git cherry-pick -x 0f5757667ec0aaf2456c3b76fcf0c6c3ea3591fe # <resolve conflicts, build, test, etc.> git commit -s git send-email --to '<stable(a)vger.kernel.org>' --in-reply-to '2025052458-fool-conflict-1a61@gregkh' --subject-prefix 'PATCH 6.1.y' HEAD^.. Possible dependencies: thanks, greg k-h ------------------ original commit in Linus's tree ------------------ From 0f5757667ec0aaf2456c3b76fcf0c6c3ea3591fe Mon Sep 17 00:00:00 2001 From: Dan Carpenter <dan.carpenter(a)linaro.org> Date: Thu, 8 May 2025 09:29:23 +0300 Subject: [PATCH] pmdomain: core: Fix error checking in genpd_dev_pm_attach_by_id() The error checking for of_count_phandle_with_args() does not handle negative error codes correctly. The problem is that "index" is a u32 so in the condition "if (index >= num_domains)" negative error codes stored in "num_domains" are type promoted to very high positive values and "index" is always going to be valid. Test for negative error codes first and then test if "index" is valid. Fixes: 3ccf3f0cd197 ("PM / Domains: Enable genpd_dev_pm_attach_by_id|name() for single PM domain") Signed-off-by: Dan Carpenter <dan.carpenter(a)linaro.org> Cc: stable(a)vger.kernel.org Link: https://lore.kernel.org/r/aBxPQ8AI8N5v-7rL@stanley.mountain Signed-off-by: Ulf Hansson <ulf.hansson(a)linaro.org> diff --git a/drivers/pmdomain/core.c b/drivers/pmdomain/core.c index 9b2f28b34bb5..d6c1ddb807b2 100644 --- a/drivers/pmdomain/core.c +++ b/drivers/pmdomain/core.c @@ -3126,7 +3126,7 @@ struct device *genpd_dev_pm_attach_by_id(struct device *dev, /* Verify that the index is within a valid range. */ num_domains = of_count_phandle_with_args(dev->of_node, "power-domains", "#power-domain-cells"); - if (index >= num_domains) + if (num_domains < 0 || index >= num_domains) return NULL; /* Allocate and register device on the genpd bus. */

6 months, 3 weeks

1
0
0 0

2025

2024

2023

2022

2021

2020

2019

2018

2017

Linux-stable-mirror May 2025