May 2025 - Linux-stable-mirror

[PATCH v2] wifi: wilc1000: Handle wilc_sdio_cmd52() failure in wilc_sdio_read_init()

by Wentao Liang

The wilc_sdio_read_init() calls wilc_sdio_cmd52() but does not check the return value. This could lead to execution with potentially invalid data if wilc_sdio_cmd52() fails. A proper implementation can be found in wilc_sdio_read_reg(). Add error handling for wilc_sdio_cmd52(). If wilc_sdio_cmd52() fails, log an error message via dev_err(). Fixes: eda308be643f ("staging: wilc1000: refactor interrupt handling for sdio") Cc: stable(a)vger.kernel.org # v5.7 Signed-off-by: Wentao Liang <vulab(a)iscas.ac.cn> --- v2: Fix code error. drivers/net/wireless/microchip/wilc1000/sdio.c | 8 +++++++- 1 file changed, 7 insertions(+), 1 deletion(-) diff --git a/drivers/net/wireless/microchip/wilc1000/sdio.c b/drivers/net/wireless/microchip/wilc1000/sdio.c index 8ff49b08bbd2..e85aa5c605ef 100644 --- a/drivers/net/wireless/microchip/wilc1000/sdio.c +++ b/drivers/net/wireless/microchip/wilc1000/sdio.c @@ -808,6 +808,7 @@ static int wilc_sdio_read_int(struct wilc *wilc, u32 *int_status) u32 tmp; u8 irq_flags; struct sdio_cmd52 cmd; + int ret; wilc_sdio_read_size(wilc, &tmp); @@ -826,7 +827,12 @@ static int wilc_sdio_read_int(struct wilc *wilc, u32 *int_status) cmd.raw = 0; cmd.read_write = 0; cmd.data = 0; - wilc_sdio_cmd52(wilc, &cmd); + ret = wilc_sdio_cmd52(wilc, &cmd); + if (ret) { + dev_err(&func->dev, "Fail cmd 52, get IRQ register...\n"); + return ret; + } + irq_flags = cmd.data; if (sdio_priv->irq_gpio) -- 2.42.0.windows.2

4 months

2
1
0 0

[PATCH 0/2] Add dma-coherent for gs101 UFS dt node

by Peter Griffin

ufs-exynos driver enables the shareability option for gs101 which means the descriptors need to be allocated as cacheable. Fix the DT node and update bindings to add the dma-coherent property. This fixes the UFS stability issues we have seen with the upstream UFS driver. Note this DT fix can go in independently of the other UFS fixes series I sent recently [1], as the bootloader already leaves the sharability bits enabled. regards, Peter [1] https://lore.kernel.org/linux-scsi/20250226220414.343659-1-peter.griffin@li… To: André Draszik <andre.draszik(a)linaro.org> To: Tudor Ambarus <tudor.ambarus(a)linaro.org> To: Rob Herring <robh(a)kernel.org> To: Krzysztof Kozlowski <krzk+dt(a)kernel.org> To: Conor Dooley <conor+dt(a)kernel.org> To: Alim Akhtar <alim.akhtar(a)samsung.com> To: Avri Altman <avri.altman(a)wdc.com> To: Bart Van Assche <bvanassche(a)acm.org> To: Martin K. Petersen <martin.petersen(a)oracle.com> Cc: Krzysztof Kozlowski <krzysztof.kozlowski(a)linaro.org> Cc: linux-arm-kernel(a)lists.infradead.org Cc: linux-samsung-soc(a)vger.kernel.org Cc: devicetree(a)vger.kernel.org Cc: linux-kernel(a)vger.kernel.org Cc: linux-scsi(a)vger.kernel.org Cc: kernel-team(a)android.com Cc: willmcvicker(a)google.com Signed-off-by: Peter Griffin <peter.griffin(a)linaro.org> --- Peter Griffin (2): arm64: dts: exynos: gs101: ufs: add dma-coherent property scsi: ufs: dt-bindings: exynos: add dma-coherent property for gs101 Documentation/devicetree/bindings/ufs/samsung,exynos-ufs.yaml | 2 ++ arch/arm64/boot/dts/exynos/google/gs101.dtsi | 1 + 2 files changed, 3 insertions(+) --- base-commit: b323d8e7bc03d27dec646bfdccb7d1a92411f189 change-id: 20250314-ufs-dma-coherent-980f2467690d Best regards, -- Peter Griffin <peter.griffin(a)linaro.org>

4 months

6
13
0 0

[PATCH v4] iio: common: st_sensors: Fix use of uninitialize device structs

by Maud Spierings via B4 Relay

From: Maud Spierings <maudspierings(a)gocontroll.com> Throughout the various probe functions &indio_dev->dev is used before it is initialized. This caused a kernel panic in st_sensors_power_enable() when the call to devm_regulator_bulk_get_enable() fails and then calls dev_err_probe() with the uninitialized device. This seems to only cause a panic with dev_err_probe(), dev_err(), dev_warn() and dev_info() don't seem to cause a panic, but are fixed as well. The issue is reported and traced here: [1] Link: https://lore.kernel.org/all/AM7P189MB100986A83D2F28AF3FFAF976E39EA@AM7P189M… [1] Cc: stable(a)vger.kernel.org Signed-off-by: Maud Spierings <maudspierings(a)gocontroll.com> --- When I search for general &indio_dev->dev usage, I see quite a lot more hits, but I am not sure if there are issues with those too. This issue has existed for a long time it seems and therefore it is nearly impossible to find a proper fixes tag. I would love to see it at least backported to 6.12 as that is where I encountered it, and I believe the patch should apply without conflicts. --- Changes in v4: - Put the link to the original issue in a proper link tag - Remove stray newline - Link to v3: https://lore.kernel.org/r/20250526-st_iio_fix-v3-1-039fec38707c@gocontroll.… Changes in v3: - Added the stable cc to the commit message - Move the link to the original issue to the commit message - Fix function notation in the commit message - Move some more of the dev_*() calls to one line - Link to v2: https://lore.kernel.org/r/20250522-st_iio_fix-v2-1-07a32655a996@gocontroll.… Changes in v2: - Added SoB in commit message - Link to v1: https://lore.kernel.org/r/20250522-st_iio_fix-v1-1-d689b35f1612@gocontroll.… --- drivers/iio/accel/st_accel_core.c | 10 +++--- drivers/iio/common/st_sensors/st_sensors_core.c | 36 ++++++++++------------ drivers/iio/common/st_sensors/st_sensors_trigger.c | 20 ++++++------ 3 files changed, 31 insertions(+), 35 deletions(-) diff --git a/drivers/iio/accel/st_accel_core.c b/drivers/iio/accel/st_accel_core.c index 99cb661fabb2d9cc1943fa8d0a6f3becb71126e6..a7961c610ed203d039bbf298c8883031a578fb0b 100644 --- a/drivers/iio/accel/st_accel_core.c +++ b/drivers/iio/accel/st_accel_core.c @@ -1353,6 +1353,7 @@ static int apply_acpi_orientation(struct iio_dev *indio_dev) union acpi_object *ont; union acpi_object *elements; acpi_status status; + struct device *parent = indio_dev->dev.parent; int ret = -EINVAL; unsigned int val; int i, j; @@ -1371,7 +1372,7 @@ static int apply_acpi_orientation(struct iio_dev *indio_dev) }; - adev = ACPI_COMPANION(indio_dev->dev.parent); + adev = ACPI_COMPANION(parent); if (!adev) return -ENXIO; @@ -1380,8 +1381,7 @@ static int apply_acpi_orientation(struct iio_dev *indio_dev) if (status == AE_NOT_FOUND) { return -ENXIO; } else if (ACPI_FAILURE(status)) { - dev_warn(&indio_dev->dev, "failed to execute _ONT: %d\n", - status); + dev_warn(parent, "failed to execute _ONT: %d\n", status); return status; } @@ -1457,12 +1457,12 @@ static int apply_acpi_orientation(struct iio_dev *indio_dev) } ret = 0; - dev_info(&indio_dev->dev, "computed mount matrix from ACPI\n"); + dev_info(parent, "computed mount matrix from ACPI\n"); out: kfree(buffer.pointer); if (ret) - dev_dbg(&indio_dev->dev, + dev_dbg(parent, "failed to apply ACPI orientation data: %d\n", ret); return ret; diff --git a/drivers/iio/common/st_sensors/st_sensors_core.c b/drivers/iio/common/st_sensors/st_sensors_core.c index 8ce1dccfea4f5aaff45d3d40f6542323dd1f0b09..dac593be56958fd0be92e13f628350fcfd0f040d 100644 --- a/drivers/iio/common/st_sensors/st_sensors_core.c +++ b/drivers/iio/common/st_sensors/st_sensors_core.c @@ -154,7 +154,7 @@ static int st_sensors_set_fullscale(struct iio_dev *indio_dev, unsigned int fs) return err; st_accel_set_fullscale_error: - dev_err(&indio_dev->dev, "failed to set new fullscale.\n"); + dev_err(indio_dev->dev.parent, "failed to set new fullscale.\n"); return err; } @@ -231,8 +231,7 @@ int st_sensors_power_enable(struct iio_dev *indio_dev) ARRAY_SIZE(regulator_names), regulator_names); if (err) - return dev_err_probe(&indio_dev->dev, err, - "unable to enable supplies\n"); + return dev_err_probe(parent, err, "unable to enable supplies\n"); return 0; } @@ -241,13 +240,14 @@ EXPORT_SYMBOL_NS(st_sensors_power_enable, "IIO_ST_SENSORS"); static int st_sensors_set_drdy_int_pin(struct iio_dev *indio_dev, struct st_sensors_platform_data *pdata) { + struct device *parent = indio_dev->dev.parent; struct st_sensor_data *sdata = iio_priv(indio_dev); /* Sensor does not support interrupts */ if (!sdata->sensor_settings->drdy_irq.int1.addr && !sdata->sensor_settings->drdy_irq.int2.addr) { if (pdata->drdy_int_pin) - dev_info(&indio_dev->dev, + dev_info(parent, "DRDY on pin INT%d specified, but sensor does not support interrupts\n", pdata->drdy_int_pin); return 0; @@ -256,29 +256,27 @@ static int st_sensors_set_drdy_int_pin(struct iio_dev *indio_dev, switch (pdata->drdy_int_pin) { case 1: if (!sdata->sensor_settings->drdy_irq.int1.mask) { - dev_err(&indio_dev->dev, - "DRDY on INT1 not available.\n"); + dev_err(parent, "DRDY on INT1 not available.\n"); return -EINVAL; } sdata->drdy_int_pin = 1; break; case 2: if (!sdata->sensor_settings->drdy_irq.int2.mask) { - dev_err(&indio_dev->dev, - "DRDY on INT2 not available.\n"); + dev_err(parent, "DRDY on INT2 not available.\n"); return -EINVAL; } sdata->drdy_int_pin = 2; break; default: - dev_err(&indio_dev->dev, "DRDY on pdata not valid.\n"); + dev_err(parent, "DRDY on pdata not valid.\n"); return -EINVAL; } if (pdata->open_drain) { if (!sdata->sensor_settings->drdy_irq.int1.addr_od && !sdata->sensor_settings->drdy_irq.int2.addr_od) - dev_err(&indio_dev->dev, + dev_err(parent, "open drain requested but unsupported.\n"); else sdata->int_pin_open_drain = true; @@ -336,6 +334,7 @@ EXPORT_SYMBOL_NS(st_sensors_dev_name_probe, "IIO_ST_SENSORS"); int st_sensors_init_sensor(struct iio_dev *indio_dev, struct st_sensors_platform_data *pdata) { + struct device *parent = indio_dev->dev.parent; struct st_sensor_data *sdata = iio_priv(indio_dev); struct st_sensors_platform_data *of_pdata; int err = 0; @@ -343,7 +342,7 @@ int st_sensors_init_sensor(struct iio_dev *indio_dev, mutex_init(&sdata->odr_lock); /* If OF/DT pdata exists, it will take precedence of anything else */ - of_pdata = st_sensors_dev_probe(indio_dev->dev.parent, pdata); + of_pdata = st_sensors_dev_probe(parent, pdata); if (IS_ERR(of_pdata)) return PTR_ERR(of_pdata); if (of_pdata) @@ -370,7 +369,7 @@ int st_sensors_init_sensor(struct iio_dev *indio_dev, if (err < 0) return err; } else - dev_info(&indio_dev->dev, "Full-scale not possible\n"); + dev_info(parent, "Full-scale not possible\n"); err = st_sensors_set_odr(indio_dev, sdata->odr); if (err < 0) @@ -405,7 +404,7 @@ int st_sensors_init_sensor(struct iio_dev *indio_dev, mask = sdata->sensor_settings->drdy_irq.int2.mask_od; } - dev_info(&indio_dev->dev, + dev_info(parent, "set interrupt line to open drain mode on pin %d\n", sdata->drdy_int_pin); err = st_sensors_write_data_with_mask(indio_dev, addr, @@ -593,21 +592,20 @@ EXPORT_SYMBOL_NS(st_sensors_get_settings_index, "IIO_ST_SENSORS"); int st_sensors_verify_id(struct iio_dev *indio_dev) { struct st_sensor_data *sdata = iio_priv(indio_dev); + struct device *parent = indio_dev->dev.parent; int wai, err; if (sdata->sensor_settings->wai_addr) { err = regmap_read(sdata->regmap, sdata->sensor_settings->wai_addr, &wai); if (err < 0) { - dev_err(&indio_dev->dev, - "failed to read Who-Am-I register.\n"); - return err; + return dev_err_probe(parent, err, + "failed to read Who-Am-I register.\n"); } if (sdata->sensor_settings->wai != wai) { - dev_warn(&indio_dev->dev, - "%s: WhoAmI mismatch (0x%x).\n", - indio_dev->name, wai); + dev_warn(parent, "%s: WhoAmI mismatch (0x%x).\n", + indio_dev->name, wai); } } diff --git a/drivers/iio/common/st_sensors/st_sensors_trigger.c b/drivers/iio/common/st_sensors/st_sensors_trigger.c index 9d4bf822a15dfcdd6c2835f6b9d7698cd3cb0b08..8a8ab688d7980f6dd43c660f90a0eba32c38388b 100644 --- a/drivers/iio/common/st_sensors/st_sensors_trigger.c +++ b/drivers/iio/common/st_sensors/st_sensors_trigger.c @@ -127,7 +127,7 @@ int st_sensors_allocate_trigger(struct iio_dev *indio_dev, sdata->trig = devm_iio_trigger_alloc(parent, "%s-trigger", indio_dev->name); if (sdata->trig == NULL) { - dev_err(&indio_dev->dev, "failed to allocate iio trigger.\n"); + dev_err(parent, "failed to allocate iio trigger.\n"); return -ENOMEM; } @@ -143,7 +143,7 @@ int st_sensors_allocate_trigger(struct iio_dev *indio_dev, case IRQF_TRIGGER_FALLING: case IRQF_TRIGGER_LOW: if (!sdata->sensor_settings->drdy_irq.addr_ihl) { - dev_err(&indio_dev->dev, + dev_err(parent, "falling/low specified for IRQ but hardware supports only rising/high: will request rising/high\n"); if (irq_trig == IRQF_TRIGGER_FALLING) irq_trig = IRQF_TRIGGER_RISING; @@ -156,21 +156,19 @@ int st_sensors_allocate_trigger(struct iio_dev *indio_dev, sdata->sensor_settings->drdy_irq.mask_ihl, 1); if (err < 0) return err; - dev_info(&indio_dev->dev, + dev_info(parent, "interrupts on the falling edge or active low level\n"); } break; case IRQF_TRIGGER_RISING: - dev_info(&indio_dev->dev, - "interrupts on the rising edge\n"); + dev_info(parent, "interrupts on the rising edge\n"); break; case IRQF_TRIGGER_HIGH: - dev_info(&indio_dev->dev, - "interrupts active high level\n"); + dev_info(parent, "interrupts active high level\n"); break; default: /* This is the most preferred mode, if possible */ - dev_err(&indio_dev->dev, + dev_err(parent, "unsupported IRQ trigger specified (%lx), enforce rising edge\n", irq_trig); irq_trig = IRQF_TRIGGER_RISING; } @@ -179,7 +177,7 @@ int st_sensors_allocate_trigger(struct iio_dev *indio_dev, if (irq_trig == IRQF_TRIGGER_FALLING || irq_trig == IRQF_TRIGGER_RISING) { if (!sdata->sensor_settings->drdy_irq.stat_drdy.addr) { - dev_err(&indio_dev->dev, + dev_err(parent, "edge IRQ not supported w/o stat register.\n"); return -EOPNOTSUPP; } @@ -214,13 +212,13 @@ int st_sensors_allocate_trigger(struct iio_dev *indio_dev, sdata->trig->name, sdata->trig); if (err) { - dev_err(&indio_dev->dev, "failed to request trigger IRQ.\n"); + dev_err(parent, "failed to request trigger IRQ.\n"); return err; } err = devm_iio_trigger_register(parent, sdata->trig); if (err < 0) { - dev_err(&indio_dev->dev, "failed to register iio trigger.\n"); + dev_err(parent, "failed to register iio trigger.\n"); return err; } indio_dev->trig = iio_trigger_get(sdata->trig); --- base-commit: 7bac2c97af4078d7a627500c9bcdd5b033f97718 change-id: 20250522-st_iio_fix-1c58fdd4d420 Best regards, -- Maud Spierings <maudspierings(a)gocontroll.com>

4 months

4
4
0 0

[PATCH v1 RESEND stable tags] nvmem: layouts: u-boot-env: remove crc32 endianness conversion

by Michael C. Pratt

On 11 Oct 2022, it was reported that the crc32 verification of the u-boot environment failed only on big-endian systems for the u-boot-env nvmem layout driver with the following error. Invalid calculated CRC32: 0x88cd6f09 (expected: 0x096fcd88) This problem has been present since the driver was introduced, and before it was made into a layout driver. The suggested fix at the time was to use further endianness conversion macros in order to have both the stored and calculated crc32 values to compare always represented in the system's endianness. This was not accepted due to sparse warnings and some disagreement on how to handle the situation. Later on in a newer revision of the patch, it was proposed to use cpu_to_le32() for both values to compare instead of le32_to_cpu() and store the values as __le32 type to remove compilation errors. The necessity of this is based on the assumption that the use of crc32() requires endianness conversion because the algorithm uses little-endian, however, this does not prove to be the case and the issue is unrelated. Upon inspecting the current kernel code, there already is an existing use of le32_to_cpu() in this driver, which suggests there already is special handling for big-endian systems, however, it is big-endian systems that have the problem. This, being the only functional difference between architectures in the driver combined with the fact that the suggested fix was to use the exact same endianness conversion for the values brings up the possibility that it was not necessary to begin with, as the same endianness conversion for two values expected to be the same is expected to be equivalent to no conversion at all. After inspecting the u-boot environment of devices of both endianness and trying to remove the existing endianness conversion, the problem is resolved in an equivalent way as the other suggested fixes. Ultimately, it seems that u-boot is agnostic to endianness at least for the purpose of environment variables. In other words, u-boot reads and writes the stored crc32 value with the same endianness that the crc32 value is calculated with in whichever endianness a certain architecture runs on. Therefore, the u-boot-env driver does not need to convert endianness. Remove the usage of endianness macros in the u-boot-env driver, and change the type of local variables to maintain the same return type. If there is a special situation in the case of endianness, it would be a corner case and should be handled by a unique "compatible". Even though it is not necessary to use endianness conversion macros here, it may be useful to use them in the future for consistent error printing. Fixes: d5542923f200 ("nvmem: add driver handling U-Boot environment variables") Reported-by: INAGAKI Hiroshi <musashino.open(a)gmail.com> Link: https://lore.kernel.org/all/20221011024928.1807-1-musashino.open@gmail.com Cc: <stable(a)vger.kernel.org> # 6.12.x Cc: <stable(a)vger.kernel.org> # 6.6.x: f4cf4e5: Revert "nvmem: add new config option" Cc: <stable(a)vger.kernel.org> # 6.6.x: 7f38b70: of: device: Export of_device_make_bus_id() Cc: <stable(a)vger.kernel.org> # 6.6.x: 4a1a402: nvmem: Move of_nvmem_layout_get_container() in another header Cc: <stable(a)vger.kernel.org> # 6.6.x: fc29fd8: nvmem: core: Rework layouts to become regular devices Cc: <stable(a)vger.kernel.org> # 6.6.x: 0331c61: nvmem: core: Expose cells through sysfs Cc: <stable(a)vger.kernel.org> # 6.6.x: 401df0d: nvmem: layouts: refactor .add_cells() callback arguments Cc: <stable(a)vger.kernel.org> # 6.6.x: 6d0ca4a: nvmem: layouts: store owner from modules with nvmem_layout_driver_register() Cc: <stable(a)vger.kernel.org> # 6.6.x: 5f15811: nvmem: layouts: add U-Boot env layout Cc: <stable(a)vger.kernel.org> # 6.6.x Signed-off-by: Michael C. Pratt <mcpratt(a)pm.me> --- drivers/nvmem/layouts/u-boot-env.c | 6 +++--- 1 file changed, 3 insertions(+), 3 deletions(-) diff --git a/drivers/nvmem/layouts/u-boot-env.c b/drivers/nvmem/layouts/u-boot-env.c index 731e6f4f12b2..21f6dcf905dd 100644 --- a/drivers/nvmem/layouts/u-boot-env.c +++ b/drivers/nvmem/layouts/u-boot-env.c @@ -92,7 +92,7 @@ int u_boot_env_parse(struct device *dev, struct nvmem_device *nvmem, size_t crc32_data_offset; size_t crc32_data_len; size_t crc32_offset; - __le32 *crc32_addr; + uint32_t *crc32_addr; size_t data_offset; size_t data_len; size_t dev_size; @@ -143,8 +143,8 @@ int u_boot_env_parse(struct device *dev, struct nvmem_device *nvmem, goto err_kfree; } - crc32_addr = (__le32 *)(buf + crc32_offset); - crc32 = le32_to_cpu(*crc32_addr); + crc32_addr = (uint32_t *)(buf + crc32_offset); + crc32 = *crc32_addr; crc32_data_len = dev_size - crc32_data_offset; data_len = dev_size - data_offset; base-commit: 38fec10eb60d687e30c8c6b5420d86e8149f7557 -- 2.30.2

4 months

2
1
0 0

[PATCH 1/3] wifi: ath11k: fix dest ring-buffer corruption

by Johan Hovold

Add the missing memory barriers to make sure that destination ring descriptors are read after the head pointers to avoid using stale data on weakly ordered architectures like aarch64. Tested-on: WCN6855 hw2.1 WLAN.HSP.1.1-03125-QCAHSPSWPL_V1_V2_SILICONZ_LITE-3.6510.41 Fixes: d5c65159f289 ("ath11k: driver for Qualcomm IEEE 802.11ax devices") Cc: stable(a)vger.kernel.org # 5.6 Signed-off-by: Johan Hovold <johan+linaro(a)kernel.org> --- drivers/net/wireless/ath/ath11k/dp_rx.c | 19 +++++++++++++++++++ drivers/net/wireless/ath/ath11k/dp_tx.c | 3 +++ 2 files changed, 22 insertions(+) diff --git a/drivers/net/wireless/ath/ath11k/dp_rx.c b/drivers/net/wireless/ath/ath11k/dp_rx.c index ea2959305dec..dfe2d889c20f 100644 --- a/drivers/net/wireless/ath/ath11k/dp_rx.c +++ b/drivers/net/wireless/ath/ath11k/dp_rx.c @@ -3851,6 +3851,9 @@ int ath11k_dp_process_rx_err(struct ath11k_base *ab, struct napi_struct *napi, ath11k_hal_srng_access_begin(ab, srng); + /* Make sure descriptor is read after the head pointer. */ + dma_rmb(); + while (budget && (desc = ath11k_hal_srng_dst_get_next_entry(ab, srng))) { struct hal_reo_dest_ring *reo_desc = (struct hal_reo_dest_ring *)desc; @@ -4154,6 +4157,9 @@ int ath11k_dp_rx_process_wbm_err(struct ath11k_base *ab, ath11k_hal_srng_access_begin(ab, srng); + /* Make sure descriptor is read after the head pointer. */ + dma_rmb(); + while (budget) { rx_desc = ath11k_hal_srng_dst_get_next_entry(ab, srng); if (!rx_desc) @@ -4280,6 +4286,9 @@ int ath11k_dp_process_rxdma_err(struct ath11k_base *ab, int mac_id, int budget) ath11k_hal_srng_access_begin(ab, srng); + /* Make sure descriptor is read after the head pointer. */ + dma_rmb(); + while (quota-- && (desc = ath11k_hal_srng_dst_get_next_entry(ab, srng))) { ath11k_hal_rx_reo_ent_paddr_get(ab, desc, &paddr, &desc_bank); @@ -4353,6 +4362,9 @@ void ath11k_dp_process_reo_status(struct ath11k_base *ab) ath11k_hal_srng_access_begin(ab, srng); + /* Make sure descriptor is read after the head pointer. */ + dma_rmb(); + while ((reo_desc = ath11k_hal_srng_dst_get_next_entry(ab, srng))) { tag = FIELD_GET(HAL_SRNG_TLV_HDR_TAG, *reo_desc); @@ -5168,6 +5180,9 @@ static void ath11k_dp_rx_mon_dest_process(struct ath11k *ar, int mac_id, rx_bufs_used = 0; rx_mon_stats = &pmon->rx_mon_stats; + /* Make sure descriptor is read after the head pointer. */ + dma_rmb(); + while ((ring_entry = ath11k_hal_srng_dst_peek(ar->ab, mon_dst_srng))) { struct sk_buff *head_msdu, *tail_msdu; @@ -5630,6 +5645,10 @@ static int ath11k_dp_full_mon_process_rx(struct ath11k_base *ab, int mac_id, spin_lock_bh(&mon_dst_srng->lock); ath11k_hal_srng_access_begin(ar->ab, mon_dst_srng); + + /* Make sure descriptor is read after the head pointer. */ + dma_rmb(); + while ((ring_entry = ath11k_hal_srng_dst_peek(ar->ab, mon_dst_srng))) { head_msdu = NULL; tail_msdu = NULL; diff --git a/drivers/net/wireless/ath/ath11k/dp_tx.c b/drivers/net/wireless/ath/ath11k/dp_tx.c index 8522c67baabf..549d17d90503 100644 --- a/drivers/net/wireless/ath/ath11k/dp_tx.c +++ b/drivers/net/wireless/ath/ath11k/dp_tx.c @@ -700,6 +700,9 @@ void ath11k_dp_tx_completion_handler(struct ath11k_base *ab, int ring_id) ath11k_hal_srng_access_begin(ab, status_ring); + /* Make sure descriptor is read after the head pointer. */ + dma_rmb(); + while ((ATH11K_TX_COMPL_NEXT(tx_ring->tx_status_head) != tx_ring->tx_status_tail) && (desc = ath11k_hal_srng_dst_get_next_entry(ab, status_ring))) { -- 2.49.0

4 months, 1 week

5
22
0 0

[PATCH v1] arm64: dts: ti: k3-am62-verdin: Enable pull-ups on I2C buses

by Emanuele Ghidoli

From: Emanuele Ghidoli <emanuele.ghidoli(a)toradex.com> Enable internal bias pull-ups on the SoC-side I2C buses that do not have external pull resistors populated on the SoM. This ensures proper default line levels. Cc: stable(a)vger.kernel.org Fixes: 316b80246b16 ("arm64: dts: ti: add verdin am62") Signed-off-by: Emanuele Ghidoli <emanuele.ghidoli(a)toradex.com> --- arch/arm64/boot/dts/ti/k3-am62-verdin.dtsi | 12 ++++++------ 1 file changed, 6 insertions(+), 6 deletions(-) diff --git a/arch/arm64/boot/dts/ti/k3-am62-verdin.dtsi b/arch/arm64/boot/dts/ti/k3-am62-verdin.dtsi index 1ea8f64b1b3b..bc2289d74774 100644 --- a/arch/arm64/boot/dts/ti/k3-am62-verdin.dtsi +++ b/arch/arm64/boot/dts/ti/k3-am62-verdin.dtsi @@ -507,16 +507,16 @@ AM62X_IOPAD(0x01ec, PIN_INPUT_PULLUP, 0) /* (A17) I2C1_SDA */ /* SODIMM 12 */ /* Verdin I2C_2_DSI */ pinctrl_i2c2: main-i2c2-default-pins { pinctrl-single,pins = < - AM62X_IOPAD(0x00b0, PIN_INPUT, 1) /* (K22) GPMC0_CSn2.I2C2_SCL */ /* SODIMM 55 */ - AM62X_IOPAD(0x00b4, PIN_INPUT, 1) /* (K24) GPMC0_CSn3.I2C2_SDA */ /* SODIMM 53 */ + AM62X_IOPAD(0x00b0, PIN_INPUT_PULLUP, 1) /* (K22) GPMC0_CSn2.I2C2_SCL */ /* SODIMM 55 */ + AM62X_IOPAD(0x00b4, PIN_INPUT_PULLUP, 1) /* (K24) GPMC0_CSn3.I2C2_SDA */ /* SODIMM 53 */ >; }; /* Verdin I2C_4_CSI */ pinctrl_i2c3: main-i2c3-default-pins { pinctrl-single,pins = < - AM62X_IOPAD(0x01d0, PIN_INPUT, 2) /* (A15) UART0_CTSn.I2C3_SCL */ /* SODIMM 95 */ - AM62X_IOPAD(0x01d4, PIN_INPUT, 2) /* (B15) UART0_RTSn.I2C3_SDA */ /* SODIMM 93 */ + AM62X_IOPAD(0x01d0, PIN_INPUT_PULLUP, 2) /* (A15) UART0_CTSn.I2C3_SCL */ /* SODIMM 95 */ + AM62X_IOPAD(0x01d4, PIN_INPUT_PULLUP, 2) /* (B15) UART0_RTSn.I2C3_SDA */ /* SODIMM 93 */ >; }; @@ -786,8 +786,8 @@ AM62X_MCU_IOPAD(0x0010, PIN_INPUT, 7) /* (C9) MCU_SPI0_D1.MCU_GPIO0_4 */ /* SODI /* Verdin I2C_3_HDMI */ pinctrl_mcu_i2c0: mcu-i2c0-default-pins { pinctrl-single,pins = < - AM62X_MCU_IOPAD(0x0044, PIN_INPUT, 0) /* (A8) MCU_I2C0_SCL */ /* SODIMM 59 */ - AM62X_MCU_IOPAD(0x0048, PIN_INPUT, 0) /* (D10) MCU_I2C0_SDA */ /* SODIMM 57 */ + AM62X_MCU_IOPAD(0x0044, PIN_INPUT_PULLUP, 0) /* (A8) MCU_I2C0_SCL */ /* SODIMM 59 */ + AM62X_MCU_IOPAD(0x0048, PIN_INPUT_PULLUP, 0) /* (D10) MCU_I2C0_SDA */ /* SODIMM 57 */ >; }; -- 2.43.0

4 months, 1 week

3
2
0 0

[PATCH v2 1/2] rtc: pcf2127: fix SPI command byte for PCF2131

by Elena Popa

PCF2131 was not responding to read/write operations using SPI. PCF2131 has a different command byte definition, compared to PCF2127/29. Added the new command byte definition when PCF2131 is detected. Fixes: afc505bf9039 ("rtc: pcf2127: add support for PCF2131 RTC") Cc: stable(a)vger.kernel.org Signed-off-by: Elena Popa <elena.popa(a)nxp.com> Acked-by: Hugo Villeneuve <hvilleneuve(a)dimonoff.com> --- Changes for v2: - explicitly mentioned SPI --- drivers/rtc/rtc-pcf2127.c | 5 +++++ 1 file changed, 5 insertions(+) diff --git a/drivers/rtc/rtc-pcf2127.c b/drivers/rtc/rtc-pcf2127.c index 31c7dca8f469..2c7917bc2a31 100644 --- a/drivers/rtc/rtc-pcf2127.c +++ b/drivers/rtc/rtc-pcf2127.c @@ -1538,6 +1538,11 @@ static int pcf2127_spi_probe(struct spi_device *spi) variant = &pcf21xx_cfg[type]; } + if (variant->type == PCF2131) { + config.read_flag_mask = 0x0; + config.write_flag_mask = 0x0; + } + config.max_register = variant->max_register, regmap = devm_regmap_init_spi(spi, &config); -- 2.34.1

4 months, 1 week

2
3
0 0

[PATCH v3] riscv: hwprobe: Fix stale vDSO data for late-initialized keys at boot

by Jingwei Wang

The riscv_hwprobe vDSO data is populated by init_hwprobe_vdso_data(), an arch_initcall_sync. However, underlying data for some keys, like RISCV_HWPROBE_KEY_MISALIGNED_VECTOR_PERF, is determined asynchronously. Specifically, the per_cpu(vector_misaligned_access, cpu) values are set by the vec_check_unaligned_access_speed_all_cpus kthread. This kthread is spawned by an earlier arch_initcall (check_unaligned_access_all_cpus) and may complete its benchmark *after* init_hwprobe_vdso_data() has already populated the vDSO with default/stale values. So, refresh the vDSO data for specified keys (e.g., MISALIGNED_VECTOR_PERF) ensuring it reflects the final boot-time values. Test by comparing vDSO and syscall results for affected keys (e.g., MISALIGNED_VECTOR_PERF), which now match their final boot-time values. Reported-by: Tsukasa OI <research_trasio(a)irq.a4lg.com> Closes: https://lore.kernel.org/linux-riscv/760d637b-b13b-4518-b6bf-883d55d44e7f@ir… Fixes: e7c9d66e313b ("RISC-V: Report vector unaligned access speed hwprobe") Cc: stable(a)vger.kernel.org Reviewed-by: Yanteng Si <si.yanteng(a)linux.dev> Reviewed-by: Jesse Taube <jesse(a)rivosinc.com> Signed-off-by: Jingwei Wang <wangjingwei(a)iscas.ac.cn> --- Changes in v3: - Retained existing blank line. Changes in v2: - Addressed feedback from Yixun's regarding #ifdef CONFIG_MMU usage. - Updated commit message to provide a high-level summary. - Added Fixes tag for commit e7c9d66e313b. v1: https://lore.kernel.org/linux-riscv/20250521052754.185231-1-wangjingwei@isc… arch/riscv/include/asm/hwprobe.h | 6 ++++++ arch/riscv/kernel/sys_hwprobe.c | 16 ++++++++++++++++ arch/riscv/kernel/unaligned_access_speed.c | 1 + 3 files changed, 23 insertions(+) diff --git a/arch/riscv/include/asm/hwprobe.h b/arch/riscv/include/asm/hwprobe.h index 1f690fea0e03de6a..58dc847d86c7f2b0 100644 --- a/arch/riscv/include/asm/hwprobe.h +++ b/arch/riscv/include/asm/hwprobe.h @@ -40,4 +40,10 @@ static inline bool riscv_hwprobe_pair_cmp(struct riscv_hwprobe *pair, return pair->value == other_pair->value; } +#ifdef CONFIG_MMU +void riscv_hwprobe_vdso_sync(__s64 sync_key); +#else +static inline void riscv_hwprobe_vdso_sync(__s64 sync_key) { }; +#endif /* CONFIG_MMU */ + #endif diff --git a/arch/riscv/kernel/sys_hwprobe.c b/arch/riscv/kernel/sys_hwprobe.c index 249aec8594a92a80..2e3e612b7ac6fd57 100644 --- a/arch/riscv/kernel/sys_hwprobe.c +++ b/arch/riscv/kernel/sys_hwprobe.c @@ -17,6 +17,7 @@ #include <asm/vector.h> #include <asm/vendor_extensions/thead_hwprobe.h> #include <vdso/vsyscall.h> +#include <vdso/datapage.h> static void hwprobe_arch_id(struct riscv_hwprobe *pair, @@ -500,6 +501,21 @@ static int __init init_hwprobe_vdso_data(void) arch_initcall_sync(init_hwprobe_vdso_data); +void riscv_hwprobe_vdso_sync(__s64 sync_key) +{ + struct vdso_arch_data *avd = vdso_k_arch_data; + struct riscv_hwprobe pair; + + pair.key = sync_key; + hwprobe_one_pair(&pair, cpu_online_mask); + /* + * Update vDSO data for the given key. + * Currently for non-ID key updates (e.g. MISALIGNED_VECTOR_PERF), + * so 'homogeneous_cpus' is not re-evaluated here. + */ + avd->all_cpu_hwprobe_values[sync_key] = pair.value; +} + #endif /* CONFIG_MMU */ SYSCALL_DEFINE5(riscv_hwprobe, struct riscv_hwprobe __user *, pairs, diff --git a/arch/riscv/kernel/unaligned_access_speed.c b/arch/riscv/kernel/unaligned_access_speed.c index 585d2dcf2dab1ccb..a2cdb396ff823720 100644 --- a/arch/riscv/kernel/unaligned_access_speed.c +++ b/arch/riscv/kernel/unaligned_access_speed.c @@ -375,6 +375,7 @@ static void check_vector_unaligned_access(struct work_struct *work __always_unus static int __init vec_check_unaligned_access_speed_all_cpus(void *unused __always_unused) { schedule_on_each_cpu(check_vector_unaligned_access); + riscv_hwprobe_vdso_sync(RISCV_HWPROBE_KEY_MISALIGNED_VECTOR_PERF); return 0; } -- 2.49.0

4 months, 1 week

3
4
0 0

FAILED: patch "[PATCH] kbuild: rpm-pkg: simplify installkernel %post" failed to apply to 6.6-stable tree

by gregkh＠linuxfoundation.org

The patch below does not apply to the 6.6-stable tree. If someone wants it applied there, or to any other stable or longterm tree, then please email the backport, including the original git commit id to <stable(a)vger.kernel.org>. To reproduce the conflict and resubmit, you may use the following commands: git fetch https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git/ linux-6.6.y git checkout FETCH_HEAD git cherry-pick -x 358de8b4f201bc05712484b15f0109b1ae3516a8 # <resolve conflicts, build, test, etc.> git commit -s git send-email --to '<stable(a)vger.kernel.org>' --in-reply-to '2024021932-lavish-expel-58e5@gregkh' --subject-prefix 'PATCH 6.6.y' HEAD^.. Possible dependencies: 358de8b4f201 ("kbuild: rpm-pkg: simplify installkernel %post") 0df8e9708594 ("scripts: clean up IA-64 code") thanks, greg k-h ------------------ original commit in Linus's tree ------------------ From 358de8b4f201bc05712484b15f0109b1ae3516a8 Mon Sep 17 00:00:00 2001 From: Jose Ignacio Tornos Martinez <jtornosm(a)redhat.com> Date: Mon, 29 Jan 2024 10:28:19 +0100 Subject: [PATCH] kbuild: rpm-pkg: simplify installkernel %post The new installkernel application that is now included in systemd-udev package allows installation although destination files are already present in the boot directory of the kernel package, but is failing with the implemented workaround for the old installkernel application from grubby package. For the new installkernel application, as Davide says: <<The %post currently does a shuffling dance before calling installkernel. This isn't actually necessary afaict, and the current implementation ends up triggering downstream issues such as https://github.com/systemd/systemd/issues/29568 This commit simplifies the logic to remove the shuffling. For reference, the original logic was added in commit 3c9c7a14b627("rpm-pkg: add %post section to create initramfs and grub hooks").>> But we need to keep the old behavior as well, because the old installkernel application from grubby package, does not allow this simplification and we need to be backward compatible to avoid issues with the different packages. Mimic Fedora shipping process and store vmlinuz, config amd System.map in the module directory instead of the boot directory. In this way, we will avoid the commented problem for all the cases, because the new destination files are not going to exist in the boot directory of the kernel package. Replace installkernel tool with kernel-install tool, because the latter is more complete. Besides, after installkernel tool execution, check to complete if the correct package files vmlinuz, System.map and config files are present in /boot directory, and if necessary, copy manually for install operation. In this way, take into account if files were not previously copied from /usr/lib/kernel/install.d/* scripts and if the suitable files for the requested package are present (it could be others if the rpm files were replace with a new pacakge with the same release and a different build). Tested with Fedora 38, Fedora 39, RHEL 9, Oracle Linux 9.3, openSUSE Tumbleweed and openMandrive ROME, using dnf/zypper and rpm tools. cc: stable(a)vger.kernel.org Co-Developed-by: Davide Cavalca <dcavalca(a)meta.com> Signed-off-by: Jose Ignacio Tornos Martinez <jtornosm(a)redhat.com> Signed-off-by: Masahiro Yamada <masahiroy(a)kernel.org> diff --git a/scripts/package/kernel.spec b/scripts/package/kernel.spec index 89298983a169..f58726671fb3 100644 --- a/scripts/package/kernel.spec +++ b/scripts/package/kernel.spec @@ -55,12 +55,12 @@ patch -p1 < %{SOURCE2} %{make} %{makeflags} KERNELRELEASE=%{KERNELRELEASE} KBUILD_BUILD_VERSION=%{release} %install -mkdir -p %{buildroot}/boot -cp $(%{make} %{makeflags} -s image_name) %{buildroot}/boot/vmlinuz-%{KERNELRELEASE} +mkdir -p %{buildroot}/lib/modules/%{KERNELRELEASE} +cp $(%{make} %{makeflags} -s image_name) %{buildroot}/lib/modules/%{KERNELRELEASE}/vmlinuz %{make} %{makeflags} INSTALL_MOD_PATH=%{buildroot} modules_install %{make} %{makeflags} INSTALL_HDR_PATH=%{buildroot}/usr headers_install -cp System.map %{buildroot}/boot/System.map-%{KERNELRELEASE} -cp .config %{buildroot}/boot/config-%{KERNELRELEASE} +cp System.map %{buildroot}/lib/modules/%{KERNELRELEASE} +cp .config %{buildroot}/lib/modules/%{KERNELRELEASE}/config ln -fns /usr/src/kernels/%{KERNELRELEASE} %{buildroot}/lib/modules/%{KERNELRELEASE}/build %if %{with_devel} %{make} %{makeflags} run-command KBUILD_RUN_COMMAND='${srctree}/scripts/package/install-extmod-build %{buildroot}/usr/src/kernels/%{KERNELRELEASE}' @@ -70,13 +70,14 @@ ln -fns /usr/src/kernels/%{KERNELRELEASE} %{buildroot}/lib/modules/%{KERNELRELEA rm -rf %{buildroot} %post -if [ -x /sbin/installkernel -a -r /boot/vmlinuz-%{KERNELRELEASE} -a -r /boot/System.map-%{KERNELRELEASE} ]; then -cp /boot/vmlinuz-%{KERNELRELEASE} /boot/.vmlinuz-%{KERNELRELEASE}-rpm -cp /boot/System.map-%{KERNELRELEASE} /boot/.System.map-%{KERNELRELEASE}-rpm -rm -f /boot/vmlinuz-%{KERNELRELEASE} /boot/System.map-%{KERNELRELEASE} -/sbin/installkernel %{KERNELRELEASE} /boot/.vmlinuz-%{KERNELRELEASE}-rpm /boot/.System.map-%{KERNELRELEASE}-rpm -rm -f /boot/.vmlinuz-%{KERNELRELEASE}-rpm /boot/.System.map-%{KERNELRELEASE}-rpm +if [ -x /usr/bin/kernel-install ]; then + /usr/bin/kernel-install add %{KERNELRELEASE} /lib/modules/%{KERNELRELEASE}/vmlinuz fi +for file in vmlinuz System.map config; do + if ! cmp --silent "/lib/modules/%{KERNELRELEASE}/${file}" "/boot/${file}-%{KERNELRELEASE}"; then + cp "/lib/modules/%{KERNELRELEASE}/${file}" "/boot/${file}-%{KERNELRELEASE}" + fi +done %preun if [ -x /sbin/new-kernel-pkg ]; then @@ -94,7 +95,6 @@ fi %defattr (-, root, root) /lib/modules/%{KERNELRELEASE} %exclude /lib/modules/%{KERNELRELEASE}/build -/boot/* %files headers %defattr (-, root, root)

4 months, 1 week

5
8
0 0

FAILED: patch "[PATCH] mm/huge_memory: fix dereferencing invalid pmd migration entry" failed to apply to 6.6-stable tree

by gregkh＠linuxfoundation.org

The patch below does not apply to the 6.6-stable tree. If someone wants it applied there, or to any other stable or longterm tree, then please email the backport, including the original git commit id to <stable(a)vger.kernel.org>. To reproduce the conflict and resubmit, you may use the following commands: git fetch https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git/ linux-6.6.y git checkout FETCH_HEAD git cherry-pick -x be6e843fc51a584672dfd9c4a6a24c8cb81d5fb7 # <resolve conflicts, build, test, etc.> git commit -s git send-email --to '<stable(a)vger.kernel.org>' --in-reply-to '2025051202-nutrient-upswing-4a86@gregkh' --subject-prefix 'PATCH 6.6.y' HEAD^.. Possible dependencies: thanks, greg k-h ------------------ original commit in Linus's tree ------------------ From be6e843fc51a584672dfd9c4a6a24c8cb81d5fb7 Mon Sep 17 00:00:00 2001 From: Gavin Guo <gavinguo(a)igalia.com> Date: Mon, 21 Apr 2025 19:35:36 +0800 Subject: [PATCH] mm/huge_memory: fix dereferencing invalid pmd migration entry When migrating a THP, concurrent access to the PMD migration entry during a deferred split scan can lead to an invalid address access, as illustrated below. To prevent this invalid access, it is necessary to check the PMD migration entry and return early. In this context, there is no need to use pmd_to_swp_entry and pfn_swap_entry_to_page to verify the equality of the target folio. Since the PMD migration entry is locked, it cannot be served as the target. Mailing list discussion and explanation from Hugh Dickins: "An anon_vma lookup points to a location which may contain the folio of interest, but might instead contain another folio: and weeding out those other folios is precisely what the "folio != pmd_folio((*pmd)" check (and the "risk of replacing the wrong folio" comment a few lines above it) is for." BUG: unable to handle page fault for address: ffffea60001db008 CPU: 0 UID: 0 PID: 2199114 Comm: tee Not tainted 6.14.0+ #4 NONE Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS 1.16.3-debian-1.16.3-2 04/01/2014 RIP: 0010:split_huge_pmd_locked+0x3b5/0x2b60 Call Trace: <TASK> try_to_migrate_one+0x28c/0x3730 rmap_walk_anon+0x4f6/0x770 unmap_folio+0x196/0x1f0 split_huge_page_to_list_to_order+0x9f6/0x1560 deferred_split_scan+0xac5/0x12a0 shrinker_debugfs_scan_write+0x376/0x470 full_proxy_write+0x15c/0x220 vfs_write+0x2fc/0xcb0 ksys_write+0x146/0x250 do_syscall_64+0x6a/0x120 entry_SYSCALL_64_after_hwframe+0x76/0x7e The bug is found by syzkaller on an internal kernel, then confirmed on upstream. Link: https://lkml.kernel.org/r/20250421113536.3682201-1-gavinguo@igalia.com Link: https://lore.kernel.org/all/20250414072737.1698513-1-gavinguo@igalia.com/ Link: https://lore.kernel.org/all/20250418085802.2973519-1-gavinguo@igalia.com/ Fixes: 84c3fc4e9c56 ("mm: thp: check pmd migration entry in common path") Signed-off-by: Gavin Guo <gavinguo(a)igalia.com> Acked-by: David Hildenbrand <david(a)redhat.com> Acked-by: Hugh Dickins <hughd(a)google.com> Acked-by: Zi Yan <ziy(a)nvidia.com> Reviewed-by: Gavin Shan <gshan(a)redhat.com> Cc: Florent Revest <revest(a)google.com> Cc: Matthew Wilcox (Oracle) <willy(a)infradead.org> Cc: Miaohe Lin <linmiaohe(a)huawei.com> Cc: <stable(a)vger.kernel.org> Signed-off-by: Andrew Morton <akpm(a)linux-foundation.org> diff --git a/mm/huge_memory.c b/mm/huge_memory.c index 2a47682d1ab7..47d76d03ce30 100644 --- a/mm/huge_memory.c +++ b/mm/huge_memory.c @@ -3075,6 +3075,8 @@ static void __split_huge_pmd_locked(struct vm_area_struct *vma, pmd_t *pmd, void split_huge_pmd_locked(struct vm_area_struct *vma, unsigned long address, pmd_t *pmd, bool freeze, struct folio *folio) { + bool pmd_migration = is_pmd_migration_entry(*pmd); + VM_WARN_ON_ONCE(folio && !folio_test_pmd_mappable(folio)); VM_WARN_ON_ONCE(!IS_ALIGNED(address, HPAGE_PMD_SIZE)); VM_WARN_ON_ONCE(folio && !folio_test_locked(folio)); @@ -3085,9 +3087,12 @@ void split_huge_pmd_locked(struct vm_area_struct *vma, unsigned long address, * require a folio to check the PMD against. Otherwise, there * is a risk of replacing the wrong folio. */ - if (pmd_trans_huge(*pmd) || pmd_devmap(*pmd) || - is_pmd_migration_entry(*pmd)) { - if (folio && folio != pmd_folio(*pmd)) + if (pmd_trans_huge(*pmd) || pmd_devmap(*pmd) || pmd_migration) { + /* + * Do not apply pmd_folio() to a migration entry; and folio lock + * guarantees that it must be of the wrong folio anyway. + */ + if (folio && (pmd_migration || folio != pmd_folio(*pmd))) return; __split_huge_pmd_locked(vma, pmd, address, freeze); }

4 months, 1 week

5
6
0 0

2025

2024

2023

2022

2021

2020

2019

2018

2017

Linux-stable-mirror May 2025