May 2025 - Linux-stable-mirror

[PATCH] usb: typec: tcpm/tcpci_maxim: Fix bounds check in process_rx()

by Amit Sunil Dhamne via B4 Relay

From: Amit Sunil Dhamne <amitsd(a)google.com> Register read of TCPC_RX_BYTE_CNT returns the total size consisting of: PD message (pending read) size + 1 Byte for Frame Type (SOP*) This is validated against the max PD message (`struct pd_message`) size without accounting for the extra byte for the frame type. Note that the struct pd_message does not contain a field for the frame_type. This results in false negatives when the "PD message (pending read)" is equal to the max PD message size. Fixes: 6f413b559f86 ("usb: typec: tcpci_maxim: Chip level TCPC driver") Signed-off-by: Amit Sunil Dhamne <amitsd(a)google.com> Signed-off-by: Badhri Jagan Sridharan <badhri(a)google.com> Reviewed-by: Kyle Tso <kyletso(a)google.com> --- drivers/usb/typec/tcpm/tcpci_maxim_core.c | 3 ++- 1 file changed, 2 insertions(+), 1 deletion(-) diff --git a/drivers/usb/typec/tcpm/tcpci_maxim_core.c b/drivers/usb/typec/tcpm/tcpci_maxim_core.c index fd1b80593367641a6f997da2fb97a2b7238f6982..648311f5e3cf135f23b5cc0668001d2f177b9edd 100644 --- a/drivers/usb/typec/tcpm/tcpci_maxim_core.c +++ b/drivers/usb/typec/tcpm/tcpci_maxim_core.c @@ -166,7 +166,8 @@ static void process_rx(struct max_tcpci_chip *chip, u16 status) return; } - if (count > sizeof(struct pd_message) || count + 1 > TCPC_RECEIVE_BUFFER_LEN) { + if (count > sizeof(struct pd_message) + 1 || + count + 1 > TCPC_RECEIVE_BUFFER_LEN) { dev_err(chip->dev, "Invalid TCPC_RX_BYTE_CNT %d\n", count); return; } --- base-commit: ebd297a2affadb6f6f4d2e5d975c1eda18ac762d change-id: 20250421-b4-new-fix-pd-rx-count-79297ba619b7 Best regards, -- Amit Sunil Dhamne <amitsd(a)google.com>

1 month

3
2
0 0

[PATCH v2] arm64/cpufeature: annotate arm64_use_ng_mappings with ro_after_init to prevent wrong idmap generation

by Yeoreum Yun

create_init_idmap() could be called before .bss section initialization which is done in early_map_kernel(). Therefore, data/test_prot could be set incorrectly by PTE_MAYBE_NG macro. PTE_MAYBE_NG macro set NG bit according to value of "arm64_use_ng_mappings". and this variable places in .bss section. # llvm-objdump-21 --syms vmlinux-gcc | grep arm64_use_ng_mappings ffff800082f242a8 g O .bss 0000000000000001 arm64_use_ng_mappings If .bss section doesn't initialized, "arm64_use_ng_mappings" would be set with garbage value and then the text_prot or data_prot could be set incorrectly. Here is what i saw with kernel compiled via llvm-21 // create_init_idmap() ffff80008255c058: d10103ff sub sp, sp, #0x40 ffff80008255c05c: a9017bfd stp x29, x30, [sp, #0x10] ffff80008255c060: a90257f6 stp x22, x21, [sp, #0x20] ffff80008255c064: a9034ff4 stp x20, x19, [sp, #0x30] ffff80008255c068: 910043fd add x29, sp, #0x10 ffff80008255c06c: 90003fc8 adrp x8, 0xffff800082d54000 ffff80008255c070: d280e06a mov x10, #0x703 // =1795 ffff80008255c074: 91400409 add x9, x0, #0x1, lsl #12 // =0x1000 ffff80008255c078: 394a4108 ldrb w8, [x8, #0x290] ------------- (1) ffff80008255c07c: f2e00d0a movk x10, #0x68, lsl #48 ffff80008255c080: f90007e9 str x9, [sp, #0x8] ffff80008255c084: aa0103f3 mov x19, x1 ffff80008255c088: aa0003f4 mov x20, x0 ffff80008255c08c: 14000000 b 0xffff80008255c08c <__pi_create_init_idmap+0x34> ffff80008255c090: aa082d56 orr x22, x10, x8, lsl #11 -------- (2) Note, (1) is load the arm64_use_ng_mappings value in w8 and (2) is set the text or data prot with the w8 value to set PTE_NG bit. If .bss section doesn't initialized, x8 can include garbage value -- In case of some platform, x8 loaded with 0xcf -- it could generate wrong mapping. (i.e) text_prot is expected with PAGE_KERNEL_ROX(0x0040000000000F83) but with garbage x8 -- 0xcf, it sets with (0x0040000000067F83) and This makes boot failure with translation fault. This error cannot happen according to code generated by compiler. here is the case of gcc: ffff80008260a940 <__pi_create_init_idmap>: ffff80008260a940: d100c3ff sub sp, sp, #0x30 ffff80008260a944: aa0003ed mov x13, x0 ffff80008260a948: 91400400 add x0, x0, #0x1, lsl #12 // =0x1000 ffff80008260a94c: a9017bfd stp x29, x30, [sp, #0x10] ffff80008260a950: 910043fd add x29, sp, #0x10 ffff80008260a954: f90017e0 str x0, [sp, #0x28] ffff80008260a958: d00048c0 adrp x0, 0xffff800082f24000 <reset_devices> ffff80008260a95c: 394aa000 ldrb w0, [x0, #0x2a8] ffff80008260a960: 37000640 tbnz w0, #0x0, 0xffff80008260aa28 <__pi_create_init_idmap+0xe8> ---(3) ffff80008260a964: d280f060 mov x0, #0x783 // =1923 ffff80008260a968: d280e062 mov x2, #0x703 // =1795 ffff80008260a96c: f2e00800 movk x0, #0x40, lsl #48 ffff80008260a970: f2e00d02 movk x2, #0x68, lsl #48 ffff80008260a974: aa2103e4 mvn x4, x1 ffff80008260a978: 8a210049 bic x9, x2, x1 ... ffff80008260aa28: d281f060 mov x0, #0xf83 // =3971 ffff80008260aa2c: d281e062 mov x2, #0xf03 // =3843 ffff80008260aa30: f2e00800 movk x0, #0x40, lsl #48 In case of gcc, according to value of arm64_use_ng_mappings (annoated as(3)), it branches to each prot settup code. However this is also problem since it branches according to garbage value too -- idmapping with incorrect pgprot. To resolve this, annotate arm64_use_ng_mappings as ro_after_init. Fixes: 84b04d3e6bdb ("arm64: kernel: Create initial ID map from C code") Cc: <stable(a)vger.kernel.org> # 6.9.x Tested-by: Nathan Chancellor <nathan(a)kernel.org> Signed-off-by: Yeoreum Yun <yeoreum.yun(a)arm.com> --- Since v1: - add comments explaining arm64_use_ng_mappings shouldn't place .bss section - fix type on commit message - https://lore.kernel.org/all/20250502145755.3751405-1-yeoreum.yun@arm.com/ There is another way to solve this problem by setting test/data_prot with _PAGE_DEFAULT which doesn't include PTE_MAYBE_NG with constanst check in create_init_idmap() to be free from arm64_use_ng_mappings. but i think it would be better to change arm64_use_ng_mappings as ro_after_init because it doesn't change after init phase and solve this problem too. --- arch/arm64/kernel/cpufeature.c | 13 ++++++++++++- 1 file changed, 12 insertions(+), 1 deletion(-) diff --git a/arch/arm64/kernel/cpufeature.c b/arch/arm64/kernel/cpufeature.c index d2104a1e7843..913ae2cead98 100644 --- a/arch/arm64/kernel/cpufeature.c +++ b/arch/arm64/kernel/cpufeature.c @@ -114,7 +114,18 @@ static struct arm64_cpu_capabilities const __ro_after_init *cpucap_ptrs[ARM64_NC DECLARE_BITMAP(boot_cpucaps, ARM64_NCAPS); -bool arm64_use_ng_mappings = false; +/* + * The variable arm64_use_ng_mappings should be placed in the .rodata section. + * Otherwise, it would end up in the .bss section, where it is initialized in + * early_map_kernel(). This can cause problems because the PTE_MAYBE_NG macro + * uses this variable, and create_init_idmap() — which might run before + * early_map_kernel() — could end up generating an incorrect idmap table. + * + * In other words, accessing variable placed in .bss section before + * early_map_kernel() will return garbage, + * potentially resulting in a wrong pgprot value. + */ +bool arm64_use_ng_mappings __ro_after_init = false; EXPORT_SYMBOL(arm64_use_ng_mappings); DEFINE_PER_CPU_READ_MOSTLY(const char *, this_cpu_vector) = vectors; -- LEVI:{C3F47F37-75D8-414A-A8BA-3980EC8A46D7}

1 month

4
21
0 0

[PATCH] spi: tegra114: Don't fail set_cs_timing when delays are zero

by Aaron Kling via B4 Relay

From: Aaron Kling <webgeek1234(a)gmail.com> The original code would skip null delay pointers, but when the pointers were converted to point within the spi_device struct, the check was not updated to skip delays of zero. Hence all spi devices that didn't set delays would fail to probe. Fixes: 04e6bb0d6bb1 ("spi: modify set_cs_timing parameter") Cc: stable(a)vger.kernel.org Signed-off-by: Aaron Kling <webgeek1234(a)gmail.com> --- drivers/spi/spi-tegra114.c | 6 +++--- 1 file changed, 3 insertions(+), 3 deletions(-) diff --git a/drivers/spi/spi-tegra114.c b/drivers/spi/spi-tegra114.c index 3822d7c8d8edb9730e937df50d1c75e095dd18ec..2a8bb798e95b954fe573f1c50445ed2e7fcbfd78 100644 --- a/drivers/spi/spi-tegra114.c +++ b/drivers/spi/spi-tegra114.c @@ -728,9 +728,9 @@ static int tegra_spi_set_hw_cs_timing(struct spi_device *spi) u32 inactive_cycles; u8 cs_state; - if (setup->unit != SPI_DELAY_UNIT_SCK || - hold->unit != SPI_DELAY_UNIT_SCK || - inactive->unit != SPI_DELAY_UNIT_SCK) { + if ((setup->unit && setup->unit != SPI_DELAY_UNIT_SCK) || + (hold->unit && hold->unit != SPI_DELAY_UNIT_SCK) || + (inactive->unit && inactive->unit != SPI_DELAY_UNIT_SCK)) { dev_err(&spi->dev, "Invalid delay unit %d, should be SPI_DELAY_UNIT_SCK\n", SPI_DELAY_UNIT_SCK); --- base-commit: a79be02bba5c31f967885c7f3bf3a756d77d11d9 change-id: 20250423-spi-tegra114-b88828c5c0f3 Best regards, -- Aaron Kling <webgeek1234(a)gmail.com>

1 month

4
6
0 0

[PATCH v3 00/23] Add support for HEVC and VP9 codecs in decoder

by Dikshita Agarwal

Hi All, This patch series adds initial support for the HEVC(H.265) and VP9 codecs in iris decoder. The objective of this work is to extend the decoder's capabilities to handle HEVC and VP9 codec streams, including necessary format handling and buffer management. In addition, the series also includes a set of fixes to address issues identified during testing of these additional codecs. These patches also address the comments and feedback received from the RFC patches previously sent. I have made the necessary improvements based on the community's suggestions. Changes in v3: - Introduced two wrappers with explicit names to handle destroy internal buffers (Nicolas) - Used sub state check instead of introducing new boolean (Vikash) - Addressed other comments (Vikash) - Reorderd patches to have all fixes patches first (Dmitry) - Link to v2: https://lore.kernel.org/r/20250428-qcom-iris-hevc-vp9-v2-0-3a6013ecb8a5@qui… Changes in v2: - Added Changes to make sure all buffers are released in session close (bryna) - Added tracking for flush responses to fix a timing issue. - Added a handling to fix timing issue in reconfig - Splitted patch 06/20 in two patches (Bryan) - Added missing fixes tag (bryan) - Updated fluster report (Nicolas) - Link to v1: https://lore.kernel.org/r/20250408-iris-dec-hevc-vp9-v1-0-acd258778bd6@quic… Changes sinces RFC: - Added additional fixes to address issues identified during further testing. - Moved typo fix to a seperate patch [Neil] - Reordered the patches for better logical flow and clarity [Neil, Dmitry] - Added fixes tag wherever applicable [Neil, Dmitry] - Removed the default case in the switch statement for codecs [Bryan] - Replaced if-else statements with switch-case [Bryan] - Added comments for mbpf [Bryan] - RFC: https://lore.kernel.org/linux-media/20250305104335.3629945-1-quic_dikshita@… This patch series depends on [1] & [2] [1] https://lore.kernel.org/linux-media/20250417-topic-sm8x50-iris-v10-v7-0-f02… [2] https://lore.kernel.org/linux-media/20250424-qcs8300_iris-v5-0-f118f505c300… These patches are tested on SM8250 and SM8550 with v4l2-ctl and Gstreamer for HEVC and VP9 decoders, at the same time ensured that the existing H264 decoder functionality remains uneffected. Note: 1 of the fluster compliance test is fixed with firmware [3] [3]: https://lore.kernel.org/linux-firmware/1a511921-446d-cdc4-0203-084c88a5dc1e… The result of fluster test on SM8550: 131/147 testcases passed while testing JCT-VC-HEVC_V1 with GStreamer-H.265-V4L2-Gst1.0. The failing test case: - 10 testcases failed due to unsupported 10 bit format. - DBLK_A_MAIN10_VIXS_4 - INITQP_B_Main10_Sony_1 - TSUNEQBD_A_MAIN10_Technicolor_2 - WP_A_MAIN10_Toshiba_3 - WP_MAIN10_B_Toshiba_3 - WPP_A_ericsson_MAIN10_2 - WPP_B_ericsson_MAIN10_2 - WPP_C_ericsson_MAIN10_2 - WPP_E_ericsson_MAIN10_2 - WPP_F_ericsson_MAIN10_2 - 4 testcase failed due to unsupported resolution - PICSIZE_A_Bossen_1 - PICSIZE_B_Bossen_1 - WPP_D_ericsson_MAIN10_2 - WPP_D_ericsson_MAIN_2 - 2 testcase failed due to CRC mismatch - RAP_A_docomo_6 - RAP_B_Bossen_2 - BUG reported: https://gitlab.freedesktop.org/gstreamer/gstreamer/-/issues/4392 Analysis - First few frames in this discarded by firmware and are sent to driver with 0 filled length. Driver send such buffers to client with timestamp 0 and payload set to 0 and make buf state to VB2_BUF_STATE_ERROR. Such buffers should be dropped by GST. But instead, the first frame displayed as green frame and when a valid buffer is sent to client later with same 0 timestamp, its dropped, leading to CRC mismatch for first frame. 235/305 testcases passed while testing VP9-TEST-VECTORS with GStreamer-VP9-V4L2-Gst1.0. The failing test case: - 64 testcases failed due to unsupported resolution - vp90-2-02-size-08x08.webm - vp90-2-02-size-08x10.webm - vp90-2-02-size-08x16.webm - vp90-2-02-size-08x18.webm - vp90-2-02-size-08x32.webm - vp90-2-02-size-08x34.webm - vp90-2-02-size-08x64.webm - vp90-2-02-size-08x66.webm - vp90-2-02-size-10x08.webm - vp90-2-02-size-10x10.webm - vp90-2-02-size-10x16.webm - vp90-2-02-size-10x18.webm - vp90-2-02-size-10x32.webm - vp90-2-02-size-10x34.webm - vp90-2-02-size-10x64.webm - vp90-2-02-size-10x66.webm - vp90-2-02-size-16x08.webm - vp90-2-02-size-16x10.webm - vp90-2-02-size-16x16.webm - vp90-2-02-size-16x18.webm - vp90-2-02-size-16x32.webm - vp90-2-02-size-16x34.webm - vp90-2-02-size-16x64.webm - vp90-2-02-size-16x66.webm - vp90-2-02-size-18x08.webm - vp90-2-02-size-18x10.webm - vp90-2-02-size-18x16.webm - vp90-2-02-size-18x18.webm - vp90-2-02-size-18x32.webm - vp90-2-02-size-18x34.webm - vp90-2-02-size-18x64.webm - vp90-2-02-size-18x66.webm - vp90-2-02-size-32x08.webm - vp90-2-02-size-32x10.webm - vp90-2-02-size-32x16.webm - vp90-2-02-size-32x18.webm - vp90-2-02-size-32x32.webm - vp90-2-02-size-32x34.webm - vp90-2-02-size-32x64.webm - vp90-2-02-size-32x66.webm - vp90-2-02-size-34x08.webm - vp90-2-02-size-34x10.webm - vp90-2-02-size-34x16.webm - vp90-2-02-size-34x18.webm - vp90-2-02-size-34x32.webm - vp90-2-02-size-34x34.webm - vp90-2-02-size-34x64.webm - vp90-2-02-size-34x66.webm - vp90-2-02-size-64x08.webm - vp90-2-02-size-64x10.webm - vp90-2-02-size-64x16.webm - vp90-2-02-size-64x18.webm - vp90-2-02-size-64x32.webm - vp90-2-02-size-64x34.webm - vp90-2-02-size-64x64.webm - vp90-2-02-size-64x66.webm - vp90-2-02-size-66x08.webm - vp90-2-02-size-66x10.webm - vp90-2-02-size-66x16.webm - vp90-2-02-size-66x18.webm - vp90-2-02-size-66x32.webm - vp90-2-02-size-66x34.webm - vp90-2-02-size-66x64.webm - vp90-2-02-size-66x66.webm - 2 testcases failed due to unsupported format - vp91-2-04-yuv422.webm - vp91-2-04-yuv444.webm - 1 testcase failed with CRC mismatch - vp90-2-22-svc_1280x720_3.ivf - Bug reported: https://gitlab.freedesktop.org/gstreamer/gstreamer/-/issues/4371 - 2 testcase failed due to unsupported resolution after sequence change - vp90-2-21-resize_inter_320x180_5_1-2.webm - vp90-2-21-resize_inter_320x180_7_1-2.webm - 1 testcase failed due to unsupported stream - vp90-2-16-intra-only.webm The result of fluster test on SM8250: 133/147 testcases passed while testing JCT-VC-HEVC_V1 with GStreamer-H.265-V4L2-Gst1.0. The failing test case: - 10 testcases failed due to unsupported 10 bit format. - DBLK_A_MAIN10_VIXS_4 - INITQP_B_Main10_Sony_1 - TSUNEQBD_A_MAIN10_Technicolor_2 - WP_A_MAIN10_Toshiba_3 - WP_MAIN10_B_Toshiba_3 - WPP_A_ericsson_MAIN10_2 - WPP_B_ericsson_MAIN10_2 - WPP_C_ericsson_MAIN10_2 - WPP_E_ericsson_MAIN10_2 - WPP_F_ericsson_MAIN10_2 - 4 testcase failed due to unsupported resolution - PICSIZE_A_Bossen_1 - PICSIZE_B_Bossen_1 - WPP_D_ericsson_MAIN10_2 - WPP_D_ericsson_MAIN_2 232/305 testcases passed while testing VP9-TEST-VECTORS with GStreamer-VP9-V4L2-Gst1.0. The failing test case: - 64 testcases failed due to unsupported resolution - vp90-2-02-size-08x08.webm - vp90-2-02-size-08x10.webm - vp90-2-02-size-08x16.webm - vp90-2-02-size-08x18.webm - vp90-2-02-size-08x32.webm - vp90-2-02-size-08x34.webm - vp90-2-02-size-08x64.webm - vp90-2-02-size-08x66.webm - vp90-2-02-size-10x08.webm - vp90-2-02-size-10x10.webm - vp90-2-02-size-10x16.webm - vp90-2-02-size-10x18.webm - vp90-2-02-size-10x32.webm - vp90-2-02-size-10x34.webm - vp90-2-02-size-10x64.webm - vp90-2-02-size-10x66.webm - vp90-2-02-size-16x08.webm - vp90-2-02-size-16x10.webm - vp90-2-02-size-16x16.webm - vp90-2-02-size-16x18.webm - vp90-2-02-size-16x32.webm - vp90-2-02-size-16x34.webm - vp90-2-02-size-16x64.webm - vp90-2-02-size-16x66.webm - vp90-2-02-size-18x08.webm - vp90-2-02-size-18x10.webm - vp90-2-02-size-18x16.webm - vp90-2-02-size-18x18.webm - vp90-2-02-size-18x32.webm - vp90-2-02-size-18x34.webm - vp90-2-02-size-18x64.webm - vp90-2-02-size-18x66.webm - vp90-2-02-size-32x08.webm - vp90-2-02-size-32x10.webm - vp90-2-02-size-32x16.webm - vp90-2-02-size-32x18.webm - vp90-2-02-size-32x32.webm - vp90-2-02-size-32x34.webm - vp90-2-02-size-32x64.webm - vp90-2-02-size-32x66.webm - vp90-2-02-size-34x08.webm - vp90-2-02-size-34x10.webm - vp90-2-02-size-34x16.webm - vp90-2-02-size-34x18.webm - vp90-2-02-size-34x32.webm - vp90-2-02-size-34x34.webm - vp90-2-02-size-34x64.webm - vp90-2-02-size-34x66.webm - vp90-2-02-size-64x08.webm - vp90-2-02-size-64x10.webm - vp90-2-02-size-64x16.webm - vp90-2-02-size-64x18.webm - vp90-2-02-size-64x32.webm - vp90-2-02-size-64x34.webm - vp90-2-02-size-64x64.webm - vp90-2-02-size-64x66.webm - vp90-2-02-size-66x08.webm - vp90-2-02-size-66x10.webm - vp90-2-02-size-66x16.webm - vp90-2-02-size-66x18.webm - vp90-2-02-size-66x32.webm - vp90-2-02-size-66x34.webm - vp90-2-02-size-66x64.webm - vp90-2-02-size-66x66.webm - 2 testcases failed due to unsupported format - vp91-2-04-yuv422.webm - vp91-2-04-yuv444.webm - 1 testcase failed with CRC mismatch - vp90-2-22-svc_1280x720_3.ivf - Bug raised: https://gitlab.freedesktop.org/gstreamer/gstreamer/-/issues/4371 - 5 testcase failed due to unsupported resolution after sequence change - vp90-2-21-resize_inter_320x180_5_1-2.webm - vp90-2-21-resize_inter_320x180_7_1-2.webm - vp90-2-21-resize_inter_320x240_5_1-2.webm - vp90-2-21-resize_inter_320x240_7_1-2.webm - vp90-2-18-resize.ivf - 1 testcase failed with CRC mismatch - vp90-2-16-intra-only.webm Analysis: First few frames are marked by firmware as NO_SHOW frame. Driver make buf state to VB2_BUF_STATE_ERROR for such frames. Such buffers should be dropped by GST. But instead, the first frame is being displayed and when a valid buffer is sent to client later with same timestamp, its dropped, leading to CRC mismatch for first frame. Signed-off-by: Dikshita Agarwal <quic_dikshita(a)quicinc.com> --- Dikshita Agarwal (23): media: iris: Skip destroying internal buffer if not dequeued media: iris: Update CAPTURE format info based on OUTPUT format media: iris: Avoid updating frame size to firmware during reconfig media: iris: Drop port check for session property response media: iris: Prevent HFI queue writes when core is in deinit state media: iris: Remove deprecated property setting to firmware media: iris: Fix missing function pointer initialization media: iris: Fix NULL pointer dereference media: iris: Fix typo in depth variable media: iris: Track flush responses to prevent premature completion media: iris: Fix buffer preparation failure during resolution change media: iris: Add handling for corrupt and drop frames media: iris: Send V4L2_BUF_FLAG_ERROR for buffers with 0 filled length media: iris: Add handling for no show frames media: iris: Improve last flag handling media: iris: Skip flush on first sequence change media: iris: Remove redundant buffer count check in stream off media: iris: Add a comment to explain usage of MBPS media: iris: Add HEVC and VP9 formats for decoder media: iris: Add platform capabilities for HEVC and VP9 decoders media: iris: Set mandatory properties for HEVC and VP9 decoders. media: iris: Add internal buffer calculation for HEVC and VP9 decoders media: iris: Add codec specific check for VP9 decoder drain handling drivers/media/platform/qcom/iris/iris_buffer.c | 35 +- drivers/media/platform/qcom/iris/iris_buffer.h | 3 +- drivers/media/platform/qcom/iris/iris_ctrls.c | 35 +- drivers/media/platform/qcom/iris/iris_hfi_common.h | 1 + .../platform/qcom/iris/iris_hfi_gen1_command.c | 48 ++- .../platform/qcom/iris/iris_hfi_gen1_defines.h | 5 +- .../platform/qcom/iris/iris_hfi_gen1_response.c | 37 +- .../platform/qcom/iris/iris_hfi_gen2_command.c | 143 +++++++- .../platform/qcom/iris/iris_hfi_gen2_defines.h | 5 + .../platform/qcom/iris/iris_hfi_gen2_response.c | 57 ++- drivers/media/platform/qcom/iris/iris_hfi_queue.c | 2 +- drivers/media/platform/qcom/iris/iris_instance.h | 6 + .../platform/qcom/iris/iris_platform_common.h | 28 +- .../media/platform/qcom/iris/iris_platform_gen2.c | 198 ++++++++-- .../platform/qcom/iris/iris_platform_qcs8300.h | 126 +++++-- .../platform/qcom/iris/iris_platform_sm8250.c | 15 +- drivers/media/platform/qcom/iris/iris_state.c | 2 +- drivers/media/platform/qcom/iris/iris_state.h | 1 + drivers/media/platform/qcom/iris/iris_vb2.c | 18 +- drivers/media/platform/qcom/iris/iris_vdec.c | 116 +++--- drivers/media/platform/qcom/iris/iris_vdec.h | 11 + drivers/media/platform/qcom/iris/iris_vidc.c | 36 +- drivers/media/platform/qcom/iris/iris_vpu_buffer.c | 397 ++++++++++++++++++++- drivers/media/platform/qcom/iris/iris_vpu_buffer.h | 46 ++- 24 files changed, 1160 insertions(+), 211 deletions(-) --- base-commit: 398a1b33f1479af35ca915c5efc9b00d6204f8fa change-id: 20250428-qcom-iris-hevc-vp9-eb31f30c3390 prerequisite-message-id: <20250417-topic-sm8x50-iris-v10-v7-0-f020cb1d0e98(a)linaro.org> prerequisite-patch-id: 35f8dae1416977e88c2db7c767800c01822e266e prerequisite-patch-id: 2bba98151ca103aa62a513a0fbd0df7ae64d9868 prerequisite-patch-id: 0e43a6d758b5fa5ab921c6aa3c19859e312b47d0 prerequisite-patch-id: b7b50aa1657be59fd51c3e53d73382a1ee75a08e prerequisite-patch-id: 30960743105a36f20b3ec4a9ff19e7bca04d6add prerequisite-patch-id: b93c37dc7e09d1631b75387dc1ca90e3066dce17 prerequisite-patch-id: afffe7096c8e110a8da08c987983bc4441d39578 prerequisite-message-id: <20250424-qcs8300_iris-v5-0-f118f505c300(a)quicinc.com> prerequisite-patch-id: 2e72fe4d11d264db3d42fa450427d30171303c6f prerequisite-patch-id: 3398937a7fabb45934bb98a530eef73252231132 prerequisite-patch-id: feda620f147ca14a958c92afdc85a1dc507701ac prerequisite-patch-id: 07ba0745c7d72796567e0a57f5c8e5355a8d2046 prerequisite-patch-id: e35b05c527217206ae871aef0d7b0261af0319ea Best regards, -- Dikshita Agarwal <quic_dikshita(a)quicinc.com>

1 month

6
33
0 0

[PATCH AUTOSEL 6.1 001/212] kconfig: merge_config: use an empty file as initfile

by Sasha Levin

From: Daniel Gomez <da.gomez(a)samsung.com> [ Upstream commit a26fe287eed112b4e21e854f173c8918a6a8596d ] The scripts/kconfig/merge_config.sh script requires an existing $INITFILE (or the $1 argument) as a base file for merging Kconfig fragments. However, an empty $INITFILE can serve as an initial starting point, later referenced by the KCONFIG_ALLCONFIG Makefile variable if -m is not used. This variable can point to any configuration file containing preset config symbols (the merged output) as stated in Documentation/kbuild/kconfig.rst. When -m is used $INITFILE will contain just the merge output requiring the user to run make (i.e. KCONFIG_ALLCONFIG=<$INITFILE> make <allnoconfig/alldefconfig> or make olddefconfig). Instead of failing when `$INITFILE` is missing, create an empty file and use it as the starting point for merges. Signed-off-by: Daniel Gomez <da.gomez(a)samsung.com> Signed-off-by: Masahiro Yamada <masahiroy(a)kernel.org> Signed-off-by: Sasha Levin <sashal(a)kernel.org> --- scripts/kconfig/merge_config.sh | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) diff --git a/scripts/kconfig/merge_config.sh b/scripts/kconfig/merge_config.sh index 72da3b8d6f307..151f9938abaa7 100755 --- a/scripts/kconfig/merge_config.sh +++ b/scripts/kconfig/merge_config.sh @@ -105,8 +105,8 @@ INITFILE=$1 shift; if [ ! -r "$INITFILE" ]; then - echo "The base file '$INITFILE' does not exist. Exit." >&2 - exit 1 + echo "The base file '$INITFILE' does not exist. Creating one..." >&2 + touch "$INITFILE" fi MERGE_LIST=$* -- 2.39.5

1 month

2
212
0 0

FAILED: patch "[PATCH] drm: Select DRM_KMS_HELPER from" failed to apply to 6.6-stable tree

by gregkh＠linuxfoundation.org

The patch below does not apply to the 6.6-stable tree. If someone wants it applied there, or to any other stable or longterm tree, then please email the backport, including the original git commit id to <stable(a)vger.kernel.org>. To reproduce the conflict and resubmit, you may use the following commands: git fetch https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git/ linux-6.6.y git checkout FETCH_HEAD git cherry-pick -x 32dce6b1949a696dc7abddc04de8cbe35c260217 # <resolve conflicts, build, test, etc.> git commit -s git send-email --to '<stable(a)vger.kernel.org>' --in-reply-to '2025050504-placate-iodize-9693@gregkh' --subject-prefix 'PATCH 6.6.y' HEAD^.. Possible dependencies: thanks, greg k-h ------------------ original commit in Linus's tree ------------------ From 32dce6b1949a696dc7abddc04de8cbe35c260217 Mon Sep 17 00:00:00 2001 From: Janne Grunau <j(a)jannau.net> Date: Tue, 4 Mar 2025 20:12:14 +0100 Subject: [PATCH] drm: Select DRM_KMS_HELPER from DRM_DEBUG_DP_MST_TOPOLOGY_REFS Using "depends on" and "select" for the same Kconfig symbol is known to cause circular dependencies (cmp. "Kconfig recursive dependency limitations" in Documentation/kbuild/kconfig-language.rst. DRM drivers are selecting drm helpers so do the same for DRM_DEBUG_DP_MST_TOPOLOGY_REFS. Fixes following circular dependency reported on x86 for the downstream Asahi Linux tree: error: recursive dependency detected! symbol DRM_KMS_HELPER is selected by DRM_GEM_SHMEM_HELPER symbol DRM_GEM_SHMEM_HELPER is selected by RUST_DRM_GEM_SHMEM_HELPER symbol RUST_DRM_GEM_SHMEM_HELPER is selected by DRM_ASAHI symbol DRM_ASAHI depends on RUST symbol RUST depends on CALL_PADDING symbol CALL_PADDING depends on OBJTOOL symbol OBJTOOL is selected by STACK_VALIDATION symbol STACK_VALIDATION depends on UNWINDER_FRAME_POINTER symbol UNWINDER_FRAME_POINTER is part of choice block at arch/x86/Kconfig.debug:224 symbol <choice> unknown is visible depending on UNWINDER_GUESS symbol UNWINDER_GUESS prompt is visible depending on STACKDEPOT symbol STACKDEPOT is selected by DRM_DEBUG_DP_MST_TOPOLOGY_REFS symbol DRM_DEBUG_DP_MST_TOPOLOGY_REFS depends on DRM_KMS_HELPER Fixes: 12a280c72868 ("drm/dp_mst: Add topology ref history tracking for debugging") Cc: stable(a)vger.kernel.org Signed-off-by: Janne Grunau <j(a)jannau.net> Acked-by: Thomas Zimmermann <tzimmermann(a)suse.de> Link: https://lore.kernel.org/r/20250304-drm_debug_dp_mst_topo_kconfig-v1-1-e16fd… Signed-off-by: Alyssa Rosenzweig <alyssa(a)rosenzweig.io> diff --git a/drivers/gpu/drm/Kconfig b/drivers/gpu/drm/Kconfig index 2cba2b6ebe1c..f01925ed8176 100644 --- a/drivers/gpu/drm/Kconfig +++ b/drivers/gpu/drm/Kconfig @@ -188,7 +188,7 @@ config DRM_DEBUG_DP_MST_TOPOLOGY_REFS bool "Enable refcount backtrace history in the DP MST helpers" depends on STACKTRACE_SUPPORT select STACKDEPOT - depends on DRM_KMS_HELPER + select DRM_KMS_HELPER depends on DEBUG_KERNEL depends on EXPERT help

1 month

4
4
0 0

Recall: Re: [PATCH v3 1/2] platform/x86: int3472: add hpd pin support

by Yan, Dongcheng

dongcheng.yan(a)intel.com would like to recall the message, "Re: [PATCH v3 1/2] platform/x86: int3472: add hpd pin support".

1 month

1
0
0 0

[PATCH AUTOSEL 5.10 1/6] pm: cpupower: bench: Prevent NULL dereference on malloc failure

by Sasha Levin

From: Zhongqiu Han <quic_zhonhan(a)quicinc.com> [ Upstream commit 208baa3ec9043a664d9acfb8174b332e6b17fb69 ] If malloc returns NULL due to low memory, 'config' pointer can be NULL. Add a check to prevent NULL dereference. Link: https://lore.kernel.org/r/20250219122715.3892223-1-quic_zhonhan@quicinc.com Signed-off-by: Zhongqiu Han <quic_zhonhan(a)quicinc.com> Signed-off-by: Shuah Khan <skhan(a)linuxfoundation.org> Signed-off-by: Sasha Levin <sashal(a)kernel.org> --- tools/power/cpupower/bench/parse.c | 4 ++++ 1 file changed, 4 insertions(+) diff --git a/tools/power/cpupower/bench/parse.c b/tools/power/cpupower/bench/parse.c index e63dc11fa3a53..48e25be6e1635 100644 --- a/tools/power/cpupower/bench/parse.c +++ b/tools/power/cpupower/bench/parse.c @@ -120,6 +120,10 @@ FILE *prepare_output(const char *dirname) struct config *prepare_default_config() { struct config *config = malloc(sizeof(struct config)); + if (!config) { + perror("malloc"); + return NULL; + } dprintf("loading defaults\n"); -- 2.39.5

1 month

5
24
0 0

[Patch v2 1/4] Drivers: hv: Allocate interrupt and monitor pages aligned to system page boundary

by longli＠linuxonhyperv.com

From: Long Li <longli(a)microsoft.com> There are use cases that interrupt and monitor pages are mapped to user-mode through UIO, they need to be system page aligned. Some Hyper-V allocation APIs introduced earlier broke those requirements. Fix those APIs by always allocating Hyper-V page at system page boundaries. Cc: stable(a)vger.kernel.org Fixes: ca48739e59df ("Drivers: hv: vmbus: Move Hyper-V page allocator to arch neutral code") Signed-off-by: Long Li <longli(a)microsoft.com> --- drivers/hv/hv_common.c | 35 ++++++++++------------------------- 1 file changed, 10 insertions(+), 25 deletions(-) diff --git a/drivers/hv/hv_common.c b/drivers/hv/hv_common.c index a7d7494feaca..297ccd7d4997 100644 --- a/drivers/hv/hv_common.c +++ b/drivers/hv/hv_common.c @@ -106,41 +106,26 @@ void __init hv_common_free(void) } /* - * Functions for allocating and freeing memory with size and - * alignment HV_HYP_PAGE_SIZE. These functions are needed because - * the guest page size may not be the same as the Hyper-V page - * size. We depend upon kmalloc() aligning power-of-two size - * allocations to the allocation size boundary, so that the - * allocated memory appears to Hyper-V as a page of the size - * it expects. + * A Hyper-V page can be used by UIO for mapping to user-space, it should + * always be allocated on system page boundaries. */ - void *hv_alloc_hyperv_page(void) { - BUILD_BUG_ON(PAGE_SIZE < HV_HYP_PAGE_SIZE); - - if (PAGE_SIZE == HV_HYP_PAGE_SIZE) - return (void *)__get_free_page(GFP_KERNEL); - else - return kmalloc(HV_HYP_PAGE_SIZE, GFP_KERNEL); + BUILD_BUG_ON(PAGE_SIZE < HV_HYP_PAGE_SIZE); + return (void *)__get_free_page(GFP_KERNEL); } EXPORT_SYMBOL_GPL(hv_alloc_hyperv_page); void *hv_alloc_hyperv_zeroed_page(void) { - if (PAGE_SIZE == HV_HYP_PAGE_SIZE) - return (void *)__get_free_page(GFP_KERNEL | __GFP_ZERO); - else - return kzalloc(HV_HYP_PAGE_SIZE, GFP_KERNEL); + BUILD_BUG_ON(PAGE_SIZE < HV_HYP_PAGE_SIZE); + return (void *)__get_free_page(GFP_KERNEL | __GFP_ZERO); } EXPORT_SYMBOL_GPL(hv_alloc_hyperv_zeroed_page); void hv_free_hyperv_page(void *addr) { - if (PAGE_SIZE == HV_HYP_PAGE_SIZE) - free_page((unsigned long)addr); - else - kfree(addr); + free_page((unsigned long)addr); } EXPORT_SYMBOL_GPL(hv_free_hyperv_page); @@ -272,7 +257,7 @@ static void hv_kmsg_dump_unregister(void) atomic_notifier_chain_unregister(&panic_notifier_list, &hyperv_panic_report_block); - hv_free_hyperv_page(hv_panic_page); + kfree(hv_panic_page); hv_panic_page = NULL; } @@ -280,7 +265,7 @@ static void hv_kmsg_dump_register(void) { int ret; - hv_panic_page = hv_alloc_hyperv_zeroed_page(); + hv_panic_page = kzalloc(HV_HYP_PAGE_SIZE, GFP_KERNEL); if (!hv_panic_page) { pr_err("Hyper-V: panic message page memory allocation failed\n"); return; @@ -289,7 +274,7 @@ static void hv_kmsg_dump_register(void) ret = kmsg_dump_register(&hv_kmsg_dumper); if (ret) { pr_err("Hyper-V: kmsg dump register error 0x%x\n", ret); - hv_free_hyperv_page(hv_panic_page); + kfree(hv_panic_page); hv_panic_page = NULL; } } -- 2.34.1

1 month

3
2
0 0

+ zsmalloc-dont-underflow-size-calculation-in-zs_obj_write.patch added to mm-hotfixes-unstable branch

by Andrew Morton

The patch titled Subject: zsmalloc: don't underflow size calculation in zs_obj_write() has been added to the -mm mm-hotfixes-unstable branch. Its filename is zsmalloc-dont-underflow-size-calculation-in-zs_obj_write.patch This patch will shortly appear at https://git.kernel.org/pub/scm/linux/kernel/git/akpm/25-new.git/tree/patche… This patch will later appear in the mm-hotfixes-unstable branch at git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm Before you just go and hit "reply", please: a) Consider who else should be cc'ed b) Prefer to cc a suitable mailing list as well c) Ideally: find the original patch on the mailing list and do a reply-to-all to that, adding suitable additional cc's *** Remember to use Documentation/process/submit-checklist.rst when testing your code *** The -mm tree is included into linux-next via the mm-everything branch at git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm and is updated there every 2-3 working days ------------------------------------------------------ From: Sergey Senozhatsky <senozhatsky(a)chromium.org> Subject: zsmalloc: don't underflow size calculation in zs_obj_write() Date: Sun, 4 May 2025 20:00:22 +0900 Do not mix class->size and object size during offsets/sizes calculation in zs_obj_write(). Size classes can merge into clusters, based on objects-per-zspage and pages-per-zspage characteristics, so some size classes can store objects smaller than class->size. This becomes problematic when object size is much smaller than class->size - we can determine that object spans two physical pages, because we use a larger class->size for this, while the actual object is much smaller and fits one physical page, so there is nothing to write to the second page and memcpy() size calculation underflows. We always know the exact size in bytes of the object that we are about to write (store), so use it instead of class->size. Link: https://lkml.kernel.org/r/20250504110650.2783619-1-senozhatsky@chromium.org Signed-off-by: Sergey Senozhatsky <senozhatsky(a)chromium.org> Reported-by: Igor Belousov <igor.b(a)beldev.am> Tested-by: Igor Belousov <igor.b(a)beldev.am> Cc: Minchan Kim <minchan(a)kernel.org> Cc: <stable(a)vger.kernel.org> Signed-off-by: Andrew Morton <akpm(a)linux-foundation.org> --- mm/zsmalloc.c | 8 ++++---- 1 file changed, 4 insertions(+), 4 deletions(-) --- a/mm/zsmalloc.c~zsmalloc-dont-underflow-size-calculation-in-zs_obj_write +++ a/mm/zsmalloc.c @@ -1243,19 +1243,19 @@ void zs_obj_write(struct zs_pool *pool, class = zspage_class(pool, zspage); off = offset_in_page(class->size * obj_idx); - if (off + class->size <= PAGE_SIZE) { + if (!ZsHugePage(zspage)) + off += ZS_HANDLE_SIZE; + + if (off + mem_len <= PAGE_SIZE) { /* this object is contained entirely within a page */ void *dst = kmap_local_zpdesc(zpdesc); - if (!ZsHugePage(zspage)) - off += ZS_HANDLE_SIZE; memcpy(dst + off, handle_mem, mem_len); kunmap_local(dst); } else { /* this object spans two pages */ size_t sizes[2]; - off += ZS_HANDLE_SIZE; sizes[0] = PAGE_SIZE - off; sizes[1] = mem_len - sizes[0]; _ Patches currently in -mm which might be from senozhatsky(a)chromium.org are zsmalloc-dont-underflow-size-calculation-in-zs_obj_write.patch zsmalloc-prefer-the-the-original-pages-node-for-compressed-data-fix.patch zram-modernize-writeback-interface.patch zram-modernize-writeback-interface-v3.patch zram-modernize-writeback-interface-v4.patch zsmalloc-cleanup-headers-includes.patch documentation-zram-update-idle-pages-tracking-documentation.patch

1 month

1
0
0 0

2025

2024

2023

2022

2021

2020

2019

2018

2017

Linux-stable-mirror May 2025