Linux-stable-mirror April 2025

linux-stable-mirror@lists.linaro.org

550 participants
1434 discussions

[PATCH v2] media: dvb: Add error checking for bcm3510_writeB()

by Wentao Liang

In bcm3510_bert_reset(), the function performed multiple writes without checking the return value of bcm3510_writeB(). This could result in silent failures if the writes failed, leaving the BER counter in an undefined state. Add error checking for each bcm3510_writeB call and propagate any errors immediately. This ensures proper error handling and prevents silent failures during BER counter initialization. Fixes: 55f51efdb696 ("[PATCH] dvb: flexcop: add BCM3510 ATSC frontend support for Air2PC card") Cc: stable(a)vger.kernel.org Signed-off-by: Wentao Liang <vulab(a)iscas.ac.cn> --- drivers/media/dvb-frontends/bcm3510.c | 20 ++++++++++++++++---- 1 file changed, 16 insertions(+), 4 deletions(-) diff --git a/drivers/media/dvb-frontends/bcm3510.c b/drivers/media/dvb-frontends/bcm3510.c index d935fb10e620..9e60020a8fea 100644 --- a/drivers/media/dvb-frontends/bcm3510.c +++ b/drivers/media/dvb-frontends/bcm3510.c @@ -270,10 +270,22 @@ static int bcm3510_bert_reset(struct bcm3510_state *st) if ((ret = bcm3510_readB(st,0xfa,&b)) < 0) return ret; - b.BERCTL_fa.RESYNC = 0; bcm3510_writeB(st,0xfa,b); - b.BERCTL_fa.RESYNC = 1; bcm3510_writeB(st,0xfa,b); - b.BERCTL_fa.RESYNC = 0; bcm3510_writeB(st,0xfa,b); - b.BERCTL_fa.CNTCTL = 1; b.BERCTL_fa.BITCNT = 1; bcm3510_writeB(st,0xfa,b); + b.BERCTL_fa.RESYNC = 0; + ret = bcm3510_writeB(st, 0xfa, b); + if (ret < 0) + return ret; + b.BERCTL_fa.RESYNC = 1; + ret = bcm3510_writeB(st, 0xfa, b); + if (ret < 0) + return ret; + b.BERCTL_fa.RESYNC = 0; + ret = bcm3510_writeB(st, 0xfa, b); + if (ret < 0) + return ret; + b.BERCTL_fa.CNTCTL = 1; b.BERCTL_fa.BITCNT = 1; + ret = bcm3510_writeB(st, 0xfa, b); + if (ret < 0) + return ret; /* clear residual bit counter TODO */ return 0; -- 2.42.0.windows.2

4 weeks

[PATCH v5] usb: xhci: quirk for data loss in ISOC transfers

by Raju Rangoju

During the High-Speed Isochronous Audio transfers, xHCI controller on certain AMD platforms experiences momentary data loss. This results in Missed Service Errors (MSE) being generated by the xHCI. The root cause of the MSE is attributed to the ISOC OUT endpoint being omitted from scheduling. This can happen when an IN endpoint with a 64ms service interval either is pre-scheduled prior to the ISOC OUT endpoint or the interval of the ISOC OUT endpoint is shorter than that of the IN endpoint. Consequently, the OUT service is neglected when an IN endpoint with a service interval exceeding 32ms is scheduled concurrently (every 64ms in this scenario). This issue is particularly seen on certain older AMD platforms. To mitigate this problem, it is recommended to adjust the service interval of the IN endpoint to not exceed 32ms (interval 8). This adjustment ensures that the OUT endpoint will not be bypassed, even if a smaller interval value is utilized. Cc: stable(a)vger.kernel.org Signed-off-by: Raju Rangoju <Raju.Rangoju(a)amd.com> --- Changes since v4: - reword the commit message. - handle the potential corner case with ISOC IN ep with 64ms ESIT Changes since v3: - Bump up the enum number XHCI_LIMIT_ENDPOINT_INTERVAL_9 Changes since v2: - added stable tag to backport to all stable kernels Changes since v1: - replaced hex values with pci device names - corrected the commit message --- drivers/usb/host/xhci-mem.c | 4 ++++ drivers/usb/host/xhci-pci.c | 25 +++++++++++++++++++++++++ drivers/usb/host/xhci.h | 1 + 3 files changed, 30 insertions(+) diff --git a/drivers/usb/host/xhci-mem.c b/drivers/usb/host/xhci-mem.c index fdf0c1008225..364b5a9e7c3e 100644 --- a/drivers/usb/host/xhci-mem.c +++ b/drivers/usb/host/xhci-mem.c @@ -1420,6 +1420,10 @@ int xhci_endpoint_init(struct xhci_hcd *xhci, /* Periodic endpoint bInterval limit quirk */ if (usb_endpoint_xfer_int(&ep->desc) || usb_endpoint_xfer_isoc(&ep->desc)) { + if ((xhci->quirks & XHCI_LIMIT_ENDPOINT_INTERVAL_9) && + interval >= 9) { + interval = 8; + } if ((xhci->quirks & XHCI_LIMIT_ENDPOINT_INTERVAL_7) && udev->speed >= USB_SPEED_HIGH && interval >= 7) { diff --git a/drivers/usb/host/xhci-pci.c b/drivers/usb/host/xhci-pci.c index 54460d11f7ee..6c15b4158f06 100644 --- a/drivers/usb/host/xhci-pci.c +++ b/drivers/usb/host/xhci-pci.c @@ -71,12 +71,22 @@ #define PCI_DEVICE_ID_INTEL_TITAN_RIDGE_4C_XHCI 0x15ec #define PCI_DEVICE_ID_INTEL_TITAN_RIDGE_DD_XHCI 0x15f0 +#define PCI_DEVICE_ID_AMD_ARIEL_TYPEC_XHCI 0x13ed +#define PCI_DEVICE_ID_AMD_ARIEL_TYPEA_XHCI 0x13ee +#define PCI_DEVICE_ID_AMD_STARSHIP_XHCI 0x148c +#define PCI_DEVICE_ID_AMD_FIREFLIGHT_15D4_XHCI 0x15d4 +#define PCI_DEVICE_ID_AMD_FIREFLIGHT_15D5_XHCI 0x15d5 +#define PCI_DEVICE_ID_AMD_RAVEN_15E0_XHCI 0x15e0 +#define PCI_DEVICE_ID_AMD_RAVEN_15E1_XHCI 0x15e1 +#define PCI_DEVICE_ID_AMD_RAVEN2_XHCI 0x15e5 #define PCI_DEVICE_ID_AMD_RENOIR_XHCI 0x1639 #define PCI_DEVICE_ID_AMD_PROMONTORYA_4 0x43b9 #define PCI_DEVICE_ID_AMD_PROMONTORYA_3 0x43ba #define PCI_DEVICE_ID_AMD_PROMONTORYA_2 0x43bb #define PCI_DEVICE_ID_AMD_PROMONTORYA_1 0x43bc +#define PCI_DEVICE_ID_ATI_NAVI10_7316_XHCI 0x7316 + #define PCI_DEVICE_ID_ASMEDIA_1042_XHCI 0x1042 #define PCI_DEVICE_ID_ASMEDIA_1042A_XHCI 0x1142 #define PCI_DEVICE_ID_ASMEDIA_1142_XHCI 0x1242 @@ -280,6 +290,21 @@ static void xhci_pci_quirks(struct device *dev, struct xhci_hcd *xhci) if (pdev->vendor == PCI_VENDOR_ID_NEC) xhci->quirks |= XHCI_NEC_HOST; + if (pdev->vendor == PCI_VENDOR_ID_AMD && + (pdev->device == PCI_DEVICE_ID_AMD_ARIEL_TYPEC_XHCI || + pdev->device == PCI_DEVICE_ID_AMD_ARIEL_TYPEA_XHCI || + pdev->device == PCI_DEVICE_ID_AMD_STARSHIP_XHCI || + pdev->device == PCI_DEVICE_ID_AMD_FIREFLIGHT_15D4_XHCI || + pdev->device == PCI_DEVICE_ID_AMD_FIREFLIGHT_15D5_XHCI || + pdev->device == PCI_DEVICE_ID_AMD_RAVEN_15E0_XHCI || + pdev->device == PCI_DEVICE_ID_AMD_RAVEN_15E1_XHCI || + pdev->device == PCI_DEVICE_ID_AMD_RAVEN2_XHCI)) + xhci->quirks |= XHCI_LIMIT_ENDPOINT_INTERVAL_9; + + if (pdev->vendor == PCI_VENDOR_ID_ATI && + pdev->device == PCI_DEVICE_ID_ATI_NAVI10_7316_XHCI) + xhci->quirks |= XHCI_LIMIT_ENDPOINT_INTERVAL_9; + if (pdev->vendor == PCI_VENDOR_ID_AMD && xhci->hci_version == 0x96) xhci->quirks |= XHCI_AMD_0x96_HOST; diff --git a/drivers/usb/host/xhci.h b/drivers/usb/host/xhci.h index 779b01dee068..6de1164e2e53 100644 --- a/drivers/usb/host/xhci.h +++ b/drivers/usb/host/xhci.h @@ -1637,6 +1637,7 @@ struct xhci_hcd { #define XHCI_WRITE_64_HI_LO BIT_ULL(47) #define XHCI_CDNS_SCTX_QUIRK BIT_ULL(48) #define XHCI_ETRON_HOST BIT_ULL(49) +#define XHCI_LIMIT_ENDPOINT_INTERVAL_9 BIT_ULL(50) unsigned int num_active_eps; unsigned int limit_active_eps; -- 2.34.1

4 weeks

[PATCH v2] net: mdio: mux-meson-gxl: set 28th bit in eth_reg2

by Christian Hewitt

From: Da Xue <da(a)libre.computer> This bit is necessary to enable packets on the interface. Without this bit set, ethernet behaves as if it is working, but no activity occurs. The vendor SDK sets this bit along with the PHY_ID bits. U-boot also sets this bit, but if u-boot is not compiled with networking support the interface will not work. Fixes: 9a24e1ff4326 ("net: mdio: add amlogic gxl mdio mux support"); Signed-off-by: Da Xue <da(a)libre.computer> Signed-off-by: Christian Hewitt <christianshewitt(a)gmail.com> --- Resending on behalf of Da Xue who has email sending issues. Changes since v1 [0]: - Remove blank line between Fixes and SoB tags - Submit without mail server mangling the patch - Minor tweaks to subject line and commit message - CC to stable(a)vger.kernel.org [0] https://patchwork.kernel.org/project/linux-amlogic/patch/CACqvRUbx-KsrMwCHY… drivers/net/mdio/mdio-mux-meson-gxl.c | 3 ++- 1 file changed, 2 insertions(+), 1 deletion(-) diff --git a/drivers/net/mdio/mdio-mux-meson-gxl.c b/drivers/net/mdio/mdio-mux-meson-gxl.c index 00c66240136b..fc5883387718 100644 --- a/drivers/net/mdio/mdio-mux-meson-gxl.c +++ b/drivers/net/mdio/mdio-mux-meson-gxl.c @@ -17,6 +17,7 @@ #define REG2_LEDACT GENMASK(23, 22) #define REG2_LEDLINK GENMASK(25, 24) #define REG2_DIV4SEL BIT(27) +#define REG2_RESERVED_28 BIT(28) #define REG2_ADCBYPASS BIT(30) #define REG2_CLKINSEL BIT(31) #define ETH_REG3 0x4 @@ -65,7 +66,7 @@ static void gxl_enable_internal_mdio(struct gxl_mdio_mux *priv) * The only constraint is that it must match the one in * drivers/net/phy/meson-gxl.c to properly match the PHY. */ - writel(FIELD_PREP(REG2_PHYID, EPHY_GXL_ID), + writel(REG2_RESERVED_28 | FIELD_PREP(REG2_PHYID, EPHY_GXL_ID), priv->regs + ETH_REG2); /* Enable the internal phy */ -- 2.34.1

4 weeks, 1 day

[PATCH net 0/4] mptcp: misc. fixes for 6.15-rc0

by Matthieu Baerts (NGI0)

Here are 4 unrelated patches: - Patch 1: fix a NULL pointer when two SYN-ACK for the same request are handled in parallel. A fix for up to v5.9. - Patch 2: selftests: fix check for the wrong FD. A fix for up to v5.17. - Patch 3: selftests: close all FDs in case of error. A fix for up to v5.17. - Patch 4: selftests: ignore a new generated file. A fix for 6.15-rc0. Signed-off-by: Matthieu Baerts (NGI0) <matttbe(a)kernel.org> --- Cong Liu (1): selftests: mptcp: fix incorrect fd checks in main_loop Gang Yan (1): mptcp: fix NULL pointer in can_accept_new_subflow Geliang Tang (1): selftests: mptcp: close fd_in before returning in main_loop Matthieu Baerts (NGI0) (1): selftests: mptcp: ignore mptcp_diag binary net/mptcp/subflow.c | 15 ++++++++------- tools/testing/selftests/net/mptcp/.gitignore | 1 + tools/testing/selftests/net/mptcp/mptcp_connect.c | 11 +++++++---- 3 files changed, 16 insertions(+), 11 deletions(-) --- base-commit: 2ea396448f26d0d7d66224cb56500a6789c7ed07 change-id: 20250328-net-mptcp-misc-fixes-6-15-98bfbeaa15ac Best regards, -- Matthieu Baerts (NGI0) <matttbe(a)kernel.org>

4 weeks, 1 day

Jump to page:

2025

2024

2023

2022

2021

2020

2019

2018

2017

Linux-stable-mirror April 2025