April 2025 - Linux-stable-mirror

[PATCH v2] usb/gadget: Add NULL check in ast_vhub_init_dev()

by Henry Martin

devm_kasprintf() returns NULL when memory allocation fails. Currently, ast_vhub_init_dev() does not check for this case, which results in a NULL pointer dereference. Add NULL check after devm_kasprintf() to prevent this issue. Cc: stable(a)vger.kernel.org # v4.18 Fixes: 7ecca2a4080c ("usb/gadget: Add driver for Aspeed SoC virtual hub") Signed-off-by: Henry Martin <bsdhenrymartin(a)gmail.com> --- V1 -> V2: Add Cc: stable label and correct commit message. drivers/usb/gadget/udc/aspeed-vhub/dev.c | 2 ++ 1 file changed, 2 insertions(+) diff --git a/drivers/usb/gadget/udc/aspeed-vhub/dev.c b/drivers/usb/gadget/udc/aspeed-vhub/dev.c index 573109ca5b79..5b7d41a990d7 100644 --- a/drivers/usb/gadget/udc/aspeed-vhub/dev.c +++ b/drivers/usb/gadget/udc/aspeed-vhub/dev.c @@ -548,6 +548,8 @@ int ast_vhub_init_dev(struct ast_vhub *vhub, unsigned int idx) d->vhub = vhub; d->index = idx; d->name = devm_kasprintf(parent, GFP_KERNEL, "port%d", idx+1); + if (!d->name) + return -ENOMEM; d->regs = vhub->regs + 0x100 + 0x10 * idx; ast_vhub_init_ep0(vhub, &d->ep0, d); -- 2.34.1

6 months, 3 weeks

3
3
0 0

[PATCH V3 1/1] phy: tegra: xusb: Use a bitmask for UTMI pad power state tracking

by Wayne Chang

The current implementation uses bias_pad_enable as a reference count to manage the shared bias pad for all UTMI PHYs. However, during system suspension with connected USB devices, multiple power-down requests for the UTMI pad result in a mismatch in the reference count, which in turn produces warnings such as: [ 237.762967] WARNING: CPU: 10 PID: 1618 at tegra186_utmi_pad_power_down+0x160/0x170 [ 237.763103] Call trace: [ 237.763104] tegra186_utmi_pad_power_down+0x160/0x170 [ 237.763107] tegra186_utmi_phy_power_off+0x10/0x30 [ 237.763110] phy_power_off+0x48/0x100 [ 237.763113] tegra_xusb_enter_elpg+0x204/0x500 [ 237.763119] tegra_xusb_suspend+0x48/0x140 [ 237.763122] platform_pm_suspend+0x2c/0xb0 [ 237.763125] dpm_run_callback.isra.0+0x20/0xa0 [ 237.763127] __device_suspend+0x118/0x330 [ 237.763129] dpm_suspend+0x10c/0x1f0 [ 237.763130] dpm_suspend_start+0x88/0xb0 [ 237.763132] suspend_devices_and_enter+0x120/0x500 [ 237.763135] pm_suspend+0x1ec/0x270 The root cause was traced back to the dynamic power-down changes introduced in commit a30951d31b25 ("xhci: tegra: USB2 pad power controls"), where the UTMI pad was being powered down without verifying its current state. This unbalanced behavior led to discrepancies in the reference count. To rectify this issue, this patch replaces the single reference counter with a bitmask, renamed to utmi_pad_enabled. Each bit in the mask corresponds to one of the four USB2 PHYs, allowing us to track each pad's enablement status individually. With this change: - The bias pad is powered on only when the mask is clear. - Each UTMI pad is powered on or down based on its corresponding bit in the mask, preventing redundant operations. - The overall power state of the shared bias pad is maintained correctly during suspend/resume cycles. The mutex used to prevent race conditions during UTMI pad enable/disable operations has been moved from the tegra186_utmi_bias_pad_power_on/off functions to the parent functions tegra186_utmi_pad_power_on/down. This change ensures that there are no race conditions when updating the bitmask. Cc: stable(a)vger.kernel.org Fixes: a30951d31b25 ("xhci: tegra: USB2 pad power controls") Signed-off-by: Wayne Chang <waynec(a)nvidia.com> --- V1 -> V2: holding the padctl->lock to protect shared bitmask V2 -> V3: updating the commit message with the mutex changes drivers/phy/tegra/xusb-tegra186.c | 44 +++++++++++++++++++------------ 1 file changed, 27 insertions(+), 17 deletions(-) diff --git a/drivers/phy/tegra/xusb-tegra186.c b/drivers/phy/tegra/xusb-tegra186.c index fae6242aa730..cc7b8a6a999f 100644 --- a/drivers/phy/tegra/xusb-tegra186.c +++ b/drivers/phy/tegra/xusb-tegra186.c @@ -237,6 +237,8 @@ #define DATA0_VAL_PD BIT(1) #define USE_XUSB_AO BIT(4) +#define TEGRA_UTMI_PAD_MAX 4 + #define TEGRA186_LANE(_name, _offset, _shift, _mask, _type) \ { \ .name = _name, \ @@ -269,7 +271,7 @@ struct tegra186_xusb_padctl { /* UTMI bias and tracking */ struct clk *usb2_trk_clk; - unsigned int bias_pad_enable; + DECLARE_BITMAP(utmi_pad_enabled, TEGRA_UTMI_PAD_MAX); /* padctl context */ struct tegra186_xusb_padctl_context context; @@ -603,12 +605,8 @@ static void tegra186_utmi_bias_pad_power_on(struct tegra_xusb_padctl *padctl) u32 value; int err; - mutex_lock(&padctl->lock); - - if (priv->bias_pad_enable++ > 0) { - mutex_unlock(&padctl->lock); + if (!bitmap_empty(priv->utmi_pad_enabled, TEGRA_UTMI_PAD_MAX)) return; - } err = clk_prepare_enable(priv->usb2_trk_clk); if (err < 0) @@ -667,17 +665,8 @@ static void tegra186_utmi_bias_pad_power_off(struct tegra_xusb_padctl *padctl) struct tegra186_xusb_padctl *priv = to_tegra186_xusb_padctl(padctl); u32 value; - mutex_lock(&padctl->lock); - - if (WARN_ON(priv->bias_pad_enable == 0)) { - mutex_unlock(&padctl->lock); - return; - } - - if (--priv->bias_pad_enable > 0) { - mutex_unlock(&padctl->lock); + if (!bitmap_empty(priv->utmi_pad_enabled, TEGRA_UTMI_PAD_MAX)) return; - } value = padctl_readl(padctl, XUSB_PADCTL_USB2_BIAS_PAD_CTL1); value |= USB2_PD_TRK; @@ -690,13 +679,13 @@ static void tegra186_utmi_bias_pad_power_off(struct tegra_xusb_padctl *padctl) clk_disable_unprepare(priv->usb2_trk_clk); } - mutex_unlock(&padctl->lock); } static void tegra186_utmi_pad_power_on(struct phy *phy) { struct tegra_xusb_lane *lane = phy_get_drvdata(phy); struct tegra_xusb_padctl *padctl = lane->pad->padctl; + struct tegra186_xusb_padctl *priv = to_tegra186_xusb_padctl(padctl); struct tegra_xusb_usb2_port *port; struct device *dev = padctl->dev; unsigned int index = lane->index; @@ -705,9 +694,16 @@ static void tegra186_utmi_pad_power_on(struct phy *phy) if (!phy) return; + mutex_lock(&padctl->lock); + if (test_bit(index, priv->utmi_pad_enabled)) { + mutex_unlock(&padctl->lock); + return; + } + port = tegra_xusb_find_usb2_port(padctl, index); if (!port) { dev_err(dev, "no port found for USB2 lane %u\n", index); + mutex_unlock(&padctl->lock); return; } @@ -724,18 +720,28 @@ static void tegra186_utmi_pad_power_on(struct phy *phy) value = padctl_readl(padctl, XUSB_PADCTL_USB2_OTG_PADX_CTL1(index)); value &= ~USB2_OTG_PD_DR; padctl_writel(padctl, value, XUSB_PADCTL_USB2_OTG_PADX_CTL1(index)); + + set_bit(index, priv->utmi_pad_enabled); + mutex_unlock(&padctl->lock); } static void tegra186_utmi_pad_power_down(struct phy *phy) { struct tegra_xusb_lane *lane = phy_get_drvdata(phy); struct tegra_xusb_padctl *padctl = lane->pad->padctl; + struct tegra186_xusb_padctl *priv = to_tegra186_xusb_padctl(padctl); unsigned int index = lane->index; u32 value; if (!phy) return; + mutex_lock(&padctl->lock); + if (!test_bit(index, priv->utmi_pad_enabled)) { + mutex_unlock(&padctl->lock); + return; + } + dev_dbg(padctl->dev, "power down UTMI pad %u\n", index); value = padctl_readl(padctl, XUSB_PADCTL_USB2_OTG_PADX_CTL0(index)); @@ -748,7 +754,11 @@ static void tegra186_utmi_pad_power_down(struct phy *phy) udelay(2); + clear_bit(index, priv->utmi_pad_enabled); + tegra186_utmi_bias_pad_power_off(padctl); + + mutex_unlock(&padctl->lock); } static int tegra186_xusb_padctl_vbus_override(struct tegra_xusb_padctl *padctl, -- 2.25.1

6 months, 3 weeks

3
2
0 0

[PATCH v1 2/2] mpi3mr: resets the pending interrupt flag

by Ranjan Kumar

If an admin interrupt is missed, admin_pend_isr may stay set and trigger admin reply processing even when no admin IOs are pending. Clearing/Resetting it in the admin completion path prevents this. Fixes: ca41929b2ed5 ("scsi: mpi3mr: Check admin reply queue from Watchdog") Cc: stable(a)vger.kernel.org Signed-off-by: Sathya Prakash <sathya.prakash(a)broadcom.com> Signed-off-by: Ranjan Kumar <ranjan.kumar(a)broadcom.com> --- drivers/scsi/mpi3mr/mpi3mr_fw.c | 3 +++ 1 file changed, 3 insertions(+) diff --git a/drivers/scsi/mpi3mr/mpi3mr_fw.c b/drivers/scsi/mpi3mr/mpi3mr_fw.c index d6e402aacb2a..003e1f7005c4 100644 --- a/drivers/scsi/mpi3mr/mpi3mr_fw.c +++ b/drivers/scsi/mpi3mr/mpi3mr_fw.c @@ -451,6 +451,7 @@ int mpi3mr_process_admin_reply_q(struct mpi3mr_ioc *mrioc) return 0; } + atomic_set(&mrioc->admin_pend_isr, 0); reply_desc = (struct mpi3_default_reply_descriptor *)mrioc->admin_reply_base + admin_reply_ci; @@ -2925,6 +2926,7 @@ static int mpi3mr_setup_admin_qpair(struct mpi3mr_ioc *mrioc) mrioc->admin_reply_ci = 0; mrioc->admin_reply_ephase = 1; atomic_set(&mrioc->admin_reply_q_in_use, 0); + atomic_set(&mrioc->admin_pend_isr, 0); if (!mrioc->admin_req_base) { mrioc->admin_req_base = dma_alloc_coherent(&mrioc->pdev->dev, @@ -4653,6 +4655,7 @@ void mpi3mr_memset_buffers(struct mpi3mr_ioc *mrioc) if (mrioc->admin_reply_base) memset(mrioc->admin_reply_base, 0, mrioc->admin_reply_q_sz); atomic_set(&mrioc->admin_reply_q_in_use, 0); + atomic_set(&mrioc->admin_pend_isr, 0); if (mrioc->init_cmds.reply) { memset(mrioc->init_cmds.reply, 0, sizeof(*mrioc->init_cmds.reply)); -- 2.31.1

6 months, 3 weeks

1
0
0 0

[PATCH v1 1/2] Regression fix: Fix pending IOs counter per reply queue

by Ranjan Kumar

Commit 199510e33dea ("scsi: mpi3mr: Update consumer index of reply queues after every 100 replies") introduced a regression with Per reply queue pending IOs counter was wrongly decremented leading to counter getting negative. Fixed the issue by dropping the extra atomic decrement for pending IOs counter. Fixes: 199510e33dea ("scsi: mpi3mr: Update consumer index of reply queues after every 100 replies") Cc: stable(a)vger.kernel.org Signed-off-by: Sathya Prakash <sathya.prakash(a)broadcom.com> Signed-off-by: Ranjan Kumar <ranjan.kumar(a)broadcom.com> --- drivers/scsi/mpi3mr/mpi3mr_fw.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/scsi/mpi3mr/mpi3mr_fw.c b/drivers/scsi/mpi3mr/mpi3mr_fw.c index 3fcb1ad3b070..d6e402aacb2a 100644 --- a/drivers/scsi/mpi3mr/mpi3mr_fw.c +++ b/drivers/scsi/mpi3mr/mpi3mr_fw.c @@ -565,7 +565,7 @@ int mpi3mr_process_op_reply_q(struct mpi3mr_ioc *mrioc, WRITE_ONCE(op_req_q->ci, le16_to_cpu(reply_desc->request_queue_ci)); mpi3mr_process_op_reply_desc(mrioc, reply_desc, &reply_dma, reply_qidx); - atomic_dec(&op_reply_q->pend_ios); + if (reply_dma) mpi3mr_repost_reply_buf(mrioc, reply_dma); num_op_reply++; -- 2.31.1

6 months, 3 weeks

1
0
0 0

[PATCH v2] asus-laptop: Fix an uninitialized variable

by Denis Arefev

The value returned by acpi_evaluate_integer() is not checked, but the result is not always successful, so it is necessary to add a check of the returned value. If the result remains negative during three iterations of the loop, then the uninitialized variable 'val' will be used in the clamp_val() macro, so it must be initialized with the current value of the 'curr' variable. In this case, the algorithm should be less noisy. Found by Linux Verification Center (linuxtesting.org) with SVACE. Fixes: b23910c2194e ("asus-laptop: Pegatron Lucid accelerometer") Cc: stable(a)vger.kernel.org Signed-off-by: Denis Arefev <arefev(a)swemel.ru> --- V1 -> V2: Added check of the return value it as Ilpo Järvinen <ilpo.jarvinen(a)linux.intel.com> suggested. Changed initialization of 'val' variable it as Ilpo Järvinen <ilpo.jarvinen(a)linux.intel.com> suggested. drivers/platform/x86/asus-laptop.c | 8 +++++--- 1 file changed, 5 insertions(+), 3 deletions(-) diff --git a/drivers/platform/x86/asus-laptop.c b/drivers/platform/x86/asus-laptop.c index d460dd194f19..ff674c6d0bbb 100644 --- a/drivers/platform/x86/asus-laptop.c +++ b/drivers/platform/x86/asus-laptop.c @@ -427,10 +427,12 @@ static int asus_pega_lucid_set(struct asus_laptop *asus, int unit, bool enable) static int pega_acc_axis(struct asus_laptop *asus, int curr, char *method) { int i, delta; - unsigned long long val; + acpi_status status; + unsigned long long val = (unsigned long long)curr; for (i = 0; i < PEGA_ACC_RETRIES; i++) { - acpi_evaluate_integer(asus->handle, method, NULL, &val); - + status = acpi_evaluate_integer(asus->handle, method, NULL, &val); + if (ACPI_FAILURE(status)) + continue; /* The output is noisy. From reading the ASL * dissassembly, timeout errors are returned with 1's * in the high word, and the lack of locking around -- 2.43.0

6 months, 3 weeks

2
1
0 0

[PATCH v3] platform/x86: amd: pmf: Fix STT limits

by Mario Limonciello

From: Mario Limonciello <mario.limonciello(a)amd.com> On some platforms it has been observed that STT limits are not being applied properly causing poor performance as power limits are set too low. STT limits that are sent to the platform are supposed to be in Q8.8 format. Convert them before sending. Reported-by: Yijun Shen <Yijun.Shen(a)dell.com> Fixes: 7c45534afa443 ("platform/x86/amd/pmf: Add support for PMF Policy Binary") Cc: stable(a)vger.kernel.org Tested-by: Yijun Shen <Yijun_Shen(a)Dell.com> Signed-off-by: Mario Limonciello <mario.limonciello(a)amd.com> --- v3: * Add a helper with a generic name (so it can be easily be moved to library code in the future) --- drivers/platform/x86/amd/pmf/auto-mode.c | 4 ++-- drivers/platform/x86/amd/pmf/cnqf.c | 8 ++++---- drivers/platform/x86/amd/pmf/core.c | 14 ++++++++++++++ drivers/platform/x86/amd/pmf/pmf.h | 1 + drivers/platform/x86/amd/pmf/sps.c | 12 ++++++++---- drivers/platform/x86/amd/pmf/tee-if.c | 6 ++++-- 6 files changed, 33 insertions(+), 12 deletions(-) diff --git a/drivers/platform/x86/amd/pmf/auto-mode.c b/drivers/platform/x86/amd/pmf/auto-mode.c index 02ff68be10d01..1400ac70c52d1 100644 --- a/drivers/platform/x86/amd/pmf/auto-mode.c +++ b/drivers/platform/x86/amd/pmf/auto-mode.c @@ -120,9 +120,9 @@ static void amd_pmf_set_automode(struct amd_pmf_dev *dev, int idx, amd_pmf_send_cmd(dev, SET_SPPT_APU_ONLY, false, pwr_ctrl->sppt_apu_only, NULL); amd_pmf_send_cmd(dev, SET_STT_MIN_LIMIT, false, pwr_ctrl->stt_min, NULL); amd_pmf_send_cmd(dev, SET_STT_LIMIT_APU, false, - pwr_ctrl->stt_skin_temp[STT_TEMP_APU], NULL); + fixp_q88_from_integer(pwr_ctrl->stt_skin_temp[STT_TEMP_APU]), NULL); amd_pmf_send_cmd(dev, SET_STT_LIMIT_HS2, false, - pwr_ctrl->stt_skin_temp[STT_TEMP_HS2], NULL); + fixp_q88_from_integer(pwr_ctrl->stt_skin_temp[STT_TEMP_HS2]), NULL); if (is_apmf_func_supported(dev, APMF_FUNC_SET_FAN_IDX)) apmf_update_fan_idx(dev, config_store.mode_set[idx].fan_control.manual, diff --git a/drivers/platform/x86/amd/pmf/cnqf.c b/drivers/platform/x86/amd/pmf/cnqf.c index bc8899e15c914..3cde8a5de64a9 100644 --- a/drivers/platform/x86/amd/pmf/cnqf.c +++ b/drivers/platform/x86/amd/pmf/cnqf.c @@ -81,10 +81,10 @@ static int amd_pmf_set_cnqf(struct amd_pmf_dev *dev, int src, int idx, amd_pmf_send_cmd(dev, SET_SPPT, false, pc->sppt, NULL); amd_pmf_send_cmd(dev, SET_SPPT_APU_ONLY, false, pc->sppt_apu_only, NULL); amd_pmf_send_cmd(dev, SET_STT_MIN_LIMIT, false, pc->stt_min, NULL); - amd_pmf_send_cmd(dev, SET_STT_LIMIT_APU, false, pc->stt_skin_temp[STT_TEMP_APU], - NULL); - amd_pmf_send_cmd(dev, SET_STT_LIMIT_HS2, false, pc->stt_skin_temp[STT_TEMP_HS2], - NULL); + amd_pmf_send_cmd(dev, SET_STT_LIMIT_APU, false, + fixp_q88_from_integer(pc->stt_skin_temp[STT_TEMP_APU]), NULL); + amd_pmf_send_cmd(dev, SET_STT_LIMIT_HS2, false, + fixp_q88_from_integer(pc->stt_skin_temp[STT_TEMP_HS2]), NULL); if (is_apmf_func_supported(dev, APMF_FUNC_SET_FAN_IDX)) apmf_update_fan_idx(dev, diff --git a/drivers/platform/x86/amd/pmf/core.c b/drivers/platform/x86/amd/pmf/core.c index a2cb2d5544f5b..5209996eba674 100644 --- a/drivers/platform/x86/amd/pmf/core.c +++ b/drivers/platform/x86/amd/pmf/core.c @@ -176,6 +176,20 @@ static void __maybe_unused amd_pmf_dump_registers(struct amd_pmf_dev *dev) dev_dbg(dev->dev, "AMD_PMF_REGISTER_MESSAGE:%x\n", value); } +/** + * fixp_q88_from_integer: Convert integer to Q8.8 + * @val: input value + * + * Converts an integer into binary fixed point format where 8 bits + * are used for integer and 8 bits are used for the decimal. + * + * Return: unsigned integer converted to Q8.8 format + */ +u32 fixp_q88_from_integer(u32 val) +{ + return val << 8; +} + int amd_pmf_send_cmd(struct amd_pmf_dev *dev, u8 message, bool get, u32 arg, u32 *data) { int rc; diff --git a/drivers/platform/x86/amd/pmf/pmf.h b/drivers/platform/x86/amd/pmf/pmf.h index e6bdee68ccf34..2865e0a70b43d 100644 --- a/drivers/platform/x86/amd/pmf/pmf.h +++ b/drivers/platform/x86/amd/pmf/pmf.h @@ -777,6 +777,7 @@ int apmf_install_handler(struct amd_pmf_dev *pmf_dev); int apmf_os_power_slider_update(struct amd_pmf_dev *dev, u8 flag); int amd_pmf_set_dram_addr(struct amd_pmf_dev *dev, bool alloc_buffer); int amd_pmf_notify_sbios_heartbeat_event_v2(struct amd_pmf_dev *dev, u8 flag); +u32 fixp_q88_from_integer(u32 val); /* SPS Layer */ int amd_pmf_get_pprof_modes(struct amd_pmf_dev *pmf); diff --git a/drivers/platform/x86/amd/pmf/sps.c b/drivers/platform/x86/amd/pmf/sps.c index d3083383f11fb..dfc5285b681f7 100644 --- a/drivers/platform/x86/amd/pmf/sps.c +++ b/drivers/platform/x86/amd/pmf/sps.c @@ -198,9 +198,11 @@ static void amd_pmf_update_slider_v2(struct amd_pmf_dev *dev, int idx) amd_pmf_send_cmd(dev, SET_STT_MIN_LIMIT, false, apts_config_store.val[idx].stt_min_limit, NULL); amd_pmf_send_cmd(dev, SET_STT_LIMIT_APU, false, - apts_config_store.val[idx].stt_skin_temp_limit_apu, NULL); + fixp_q88_from_integer(apts_config_store.val[idx].stt_skin_temp_limit_apu), + NULL); amd_pmf_send_cmd(dev, SET_STT_LIMIT_HS2, false, - apts_config_store.val[idx].stt_skin_temp_limit_hs2, NULL); + fixp_q88_from_integer(apts_config_store.val[idx].stt_skin_temp_limit_hs2), + NULL); } void amd_pmf_update_slider(struct amd_pmf_dev *dev, bool op, int idx, @@ -217,9 +219,11 @@ void amd_pmf_update_slider(struct amd_pmf_dev *dev, bool op, int idx, amd_pmf_send_cmd(dev, SET_STT_MIN_LIMIT, false, config_store.prop[src][idx].stt_min, NULL); amd_pmf_send_cmd(dev, SET_STT_LIMIT_APU, false, - config_store.prop[src][idx].stt_skin_temp[STT_TEMP_APU], NULL); + fixp_q88_from_integer(config_store.prop[src][idx].stt_skin_temp[STT_TEMP_APU]), + NULL); amd_pmf_send_cmd(dev, SET_STT_LIMIT_HS2, false, - config_store.prop[src][idx].stt_skin_temp[STT_TEMP_HS2], NULL); + fixp_q88_from_integer(config_store.prop[src][idx].stt_skin_temp[STT_TEMP_HS2]), + NULL); } else if (op == SLIDER_OP_GET) { amd_pmf_send_cmd(dev, GET_SPL, true, ARG_NONE, &table->prop[src][idx].spl); amd_pmf_send_cmd(dev, GET_FPPT, true, ARG_NONE, &table->prop[src][idx].fppt); diff --git a/drivers/platform/x86/amd/pmf/tee-if.c b/drivers/platform/x86/amd/pmf/tee-if.c index a1e43873a07b0..22d48048f9d01 100644 --- a/drivers/platform/x86/amd/pmf/tee-if.c +++ b/drivers/platform/x86/amd/pmf/tee-if.c @@ -123,7 +123,8 @@ static void amd_pmf_apply_policies(struct amd_pmf_dev *dev, struct ta_pmf_enact_ case PMF_POLICY_STT_SKINTEMP_APU: if (dev->prev_data->stt_skintemp_apu != val) { - amd_pmf_send_cmd(dev, SET_STT_LIMIT_APU, false, val, NULL); + amd_pmf_send_cmd(dev, SET_STT_LIMIT_APU, false, + fixp_q88_from_integer(val), NULL); dev_dbg(dev->dev, "update STT_SKINTEMP_APU: %u\n", val); dev->prev_data->stt_skintemp_apu = val; } @@ -131,7 +132,8 @@ static void amd_pmf_apply_policies(struct amd_pmf_dev *dev, struct ta_pmf_enact_ case PMF_POLICY_STT_SKINTEMP_HS2: if (dev->prev_data->stt_skintemp_hs2 != val) { - amd_pmf_send_cmd(dev, SET_STT_LIMIT_HS2, false, val, NULL); + amd_pmf_send_cmd(dev, SET_STT_LIMIT_HS2, false, + fixp_q88_from_integer(val), NULL); dev_dbg(dev->dev, "update STT_SKINTEMP_HS2: %u\n", val); dev->prev_data->stt_skintemp_hs2 = val; } -- 2.43.0

6 months, 3 weeks

3
3
0 0

[PATCH] usb: cdnsp: Fix issue with resuming from L1

by Pawel Laszczak

Subject: [PATCH] usb: cdnsp: Fix issue with resuming from L1 In very rare cases after resuming controller from L1 to L0 it reads registers before the clock has been enabled and as the result driver reads incorrect value. To fix this issue driver increases APB timeout value. Probably this issue occurs only on Cadence platform but fix should have no impact for other existing platforms. Fixes: 3d82904559f4 ("usb: cdnsp: cdns3 Add main part of Cadence USBSSP DRD Driver") cc: stable(a)vger.kernel.org Signed-off-by: Pawel Laszczak <pawell(a)cadence.com> --- drivers/usb/cdns3/cdnsp-gadget.c | 22 ++++++++++++++++++++++ drivers/usb/cdns3/cdnsp-gadget.h | 4 ++++ 2 files changed, 26 insertions(+) diff --git a/drivers/usb/cdns3/cdnsp-gadget.c b/drivers/usb/cdns3/cdnsp-gadget.c index 87f310841735..b12581b94567 100644 --- a/drivers/usb/cdns3/cdnsp-gadget.c +++ b/drivers/usb/cdns3/cdnsp-gadget.c @@ -139,6 +139,21 @@ static void cdnsp_clear_port_change_bit(struct cdnsp_device *pdev, (portsc & PORT_CHANGE_BITS), port_regs); } +static void cdnsp_set_apb_timeout_value(struct cdnsp_device *pdev) +{ + __le32 __iomem *reg; + void __iomem *base; + u32 offset = 0; + u32 val; + + base = &pdev->cap_regs->hc_capbase; + offset = cdnsp_find_next_ext_cap(base, offset, D_XEC_PRE_REGS_CAP); + reg = base + offset + REG_CHICKEN_BITS_3_OFFSET; + + val = le32_to_cpu(readl(reg)); + writel(cpu_to_le32(CHICKEN_APB_TIMEOUT_SET(val)), reg); +} + static void cdnsp_set_chicken_bits_2(struct cdnsp_device *pdev, u32 bit) { __le32 __iomem *reg; @@ -1798,6 +1813,13 @@ static int cdnsp_gen_setup(struct cdnsp_device *pdev) pdev->hci_version = HC_VERSION(pdev->hcc_params); pdev->hcc_params = readl(&pdev->cap_regs->hcc_params); + /* In very rare cases after resuming controller from L1 to L0 it reads + * registers before the clock has been enabled and as the result driver + * reads incorrect value. + * To fix this issue driver increases APB timeout value. + */ + cdnsp_set_apb_timeout_value(pdev); + cdnsp_get_rev_cap(pdev); /* Make sure the Device Controller is halted. */ diff --git a/drivers/usb/cdns3/cdnsp-gadget.h b/drivers/usb/cdns3/cdnsp-gadget.h index 84887dfea763..a4d678fba005 100644 --- a/drivers/usb/cdns3/cdnsp-gadget.h +++ b/drivers/usb/cdns3/cdnsp-gadget.h @@ -520,6 +520,10 @@ struct cdnsp_rev_cap { #define REG_CHICKEN_BITS_2_OFFSET 0x48 #define CHICKEN_XDMA_2_TP_CACHE_DIS BIT(28) +#define REG_CHICKEN_BITS_3_OFFSET 0x4C +#define CHICKEN_APB_TIMEOUT_VALUE 0x1C20 +#define CHICKEN_APB_TIMEOUT_SET(p) (((p) & ~GENMASK(21, 0)) | CHICKEN_APB_TIMEOUT_VALUE) + /* XBUF Extended Capability ID. */ #define XBUF_CAP_ID 0xCB #define XBUF_RX_TAG_MASK_0_OFFSET 0x1C -- 2.43.0

6 months, 3 weeks

3
5
0 0

[PATCH 1/3] drm/nouveau: Prevent signaled fences in pending list

by Philipp Stanner

Nouveau currently relies on the assumption that dma_fences will only ever get signaled through nouveau_fence_signal(), which takes care of removing a signaled fence from the list nouveau_fence_chan.pending. This self-imposed rule is violated in nouveau_fence_done(), where dma_fence_is_signaled() (somewhat surprisingly, considering its name) can signal the fence without removing it from the list. This enables accesses to already signaled fences through the list, which is a bug. In particular, it can race with nouveau_fence_context_kill(), which would then attempt to set an error code on an already signaled fence, which is illegal. In nouveau_fence_done(), the call to nouveau_fence_update() already ensures to signal all ready fences. Thus, the signaling potentially performed by dma_fence_is_signaled() is actually not necessary. Replace the call to dma_fence_is_signaled() with nouveau_fence_base_is_signaled(). Cc: <stable(a)vger.kernel.org> # 4.10+, precise commit not to be determined Signed-off-by: Philipp Stanner <phasta(a)kernel.org> --- drivers/gpu/drm/nouveau/nouveau_fence.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/gpu/drm/nouveau/nouveau_fence.c b/drivers/gpu/drm/nouveau/nouveau_fence.c index 7cc84472cece..33535987d8ed 100644 --- a/drivers/gpu/drm/nouveau/nouveau_fence.c +++ b/drivers/gpu/drm/nouveau/nouveau_fence.c @@ -274,7 +274,7 @@ nouveau_fence_done(struct nouveau_fence *fence) nvif_event_block(&fctx->event); spin_unlock_irqrestore(&fctx->lock, flags); } - return dma_fence_is_signaled(&fence->base); + return test_bit(DMA_FENCE_FLAG_SIGNALED_BIT, &fence->base.flags); } static long -- 2.48.1

6 months, 3 weeks

4
8
0 0

[PATCH RESEND] tty: Require CAP_SYS_ADMIN for all usages of TIOCL_SELMOUSEREPORT

by Günther Noack

This requirement was overeagerly loosened in commit 2f83e38a095f ("tty: Permit some TIOCL_SETSEL modes without CAP_SYS_ADMIN"), but as it turns out, (1) the logic I implemented there was inconsistent (apologies!), (2) TIOCL_SELMOUSEREPORT might actually be a small security risk after all, and (3) TIOCL_SELMOUSEREPORT is only meant to be used by the mouse daemon (GPM or Consolation), which runs as CAP_SYS_ADMIN already. In more detail: 1. The previous patch has inconsistent logic: In commit 2f83e38a095f ("tty: Permit some TIOCL_SETSEL modes without CAP_SYS_ADMIN"), we checked for sel_mode == TIOCL_SELMOUSEREPORT, but overlooked that the lower four bits of this "mode" parameter were actually used as an additional way to pass an argument. So the patch did actually still require CAP_SYS_ADMIN, if any of the mouse button bits are set, but did not require it if none of the mouse buttons bits are set. This logic is inconsistent and was not intentional. We should have the same policies for using TIOCL_SELMOUSEREPORT independent of the value of the "hidden" mouse button argument. I sent a separate documentation patch to the man page list with more details on TIOCL_SELMOUSEREPORT: https://lore.kernel.org/all/20250223091342.35523-2-gnoack3000@gmail.com/ 2. TIOCL_SELMOUSEREPORT is indeed a potential security risk which can let an attacker simulate "keyboard" input to command line applications on the same terminal, like TIOCSTI and some other TIOCLINUX "selection mode" IOCTLs. By enabling mouse reporting on a terminal and then injecting mouse reports through TIOCL_SELMOUSEREPORT, an attacker can simulate mouse movements on the same terminal, similar to the TIOCSTI keystroke injection attacks that were previously possible with TIOCSTI and other TIOCL_SETSEL selection modes. Many programs (including libreadline/bash) are then prone to misinterpret these mouse reports as normal keyboard input because they do not expect input in the X11 mouse protocol form. The attacker does not have complete control over the escape sequence, but they can at least control the values of two consecutive bytes in the binary mouse reporting escape sequence. I went into more detail on that in the discussion at https://lore.kernel.org/all/20250221.0a947528d8f3@gnoack.org/ It is not equally trivial to simulate arbitrary keystrokes as it was with TIOCSTI (commit 83efeeeb3d04 ("tty: Allow TIOCSTI to be disabled")), but the general mechanism is there, and together with the small number of existing legit use cases (see below), it would be better to revert back to requiring CAP_SYS_ADMIN for TIOCL_SELMOUSEREPORT, as it was already the case before commit 2f83e38a095f ("tty: Permit some TIOCL_SETSEL modes without CAP_SYS_ADMIN"). 3. TIOCL_SELMOUSEREPORT is only used by the mouse daemons (GPM or Consolation), and they are the only legit use case: To quote console_codes(4): The mouse tracking facility is intended to return xterm(1)-compatible mouse status reports. Because the console driver has no way to know the device or type of the mouse, these reports are returned in the console input stream only when the virtual terminal driver receives a mouse update ioctl. These ioctls must be generated by a mouse-aware user-mode application such as the gpm(8) daemon. Jared Finder has also confirmed in https://lore.kernel.org/all/491f3df9de6593df8e70dbe77614b026@finder.org/ that Emacs does not call TIOCL_SELMOUSEREPORT directly, and it would be difficult to find good reasons for doing that, given that it would interfere with the reports that GPM is sending. More information on the interaction between GPM, terminals and the kernel with additional pointers is also available in this patch: https://lore.kernel.org/all/a773e48920aa104a65073671effbdee665c105fc.160396… For background on who else uses TIOCL_SELMOUSEREPORT: Debian Code search finds one page of results, the only two known callers are the two mouse daemons GPM and Consolation. (GPM does not show up in the search results because it uses literal numbers to refer to TIOCLINUX-related enums. I looked through GPM by hand instead. TIOCL_SELMOUSEREPORT is also not used from libgpm.) https://codesearch.debian.net/search?q=TIOCL_SELMOUSEREPORT Cc: Jared Finder <jared(a)finder.org> Cc: Jann Horn <jannh(a)google.com> Cc: Hanno Böck <hanno(a)hboeck.de> Cc: Jiri Slaby <jirislaby(a)kernel.org> Cc: Kees Cook <kees(a)kernel.org> Cc: stable(a)vger.kernel.org Fixes: 2f83e38a095f ("tty: Permit some TIOCL_SETSEL modes without CAP_SYS_ADMIN") Signed-off-by: Günther Noack <gnoack3000(a)gmail.com> --- drivers/tty/vt/selection.c | 5 ++--- 1 file changed, 2 insertions(+), 3 deletions(-) diff --git a/drivers/tty/vt/selection.c b/drivers/tty/vt/selection.c index 0bd6544e30a6b..791e2f1f7c0b6 100644 --- a/drivers/tty/vt/selection.c +++ b/drivers/tty/vt/selection.c @@ -193,13 +193,12 @@ int set_selection_user(const struct tiocl_selection __user *sel, return -EFAULT; /* - * TIOCL_SELCLEAR, TIOCL_SELPOINTER and TIOCL_SELMOUSEREPORT are OK to - * use without CAP_SYS_ADMIN as they do not modify the selection. + * TIOCL_SELCLEAR and TIOCL_SELPOINTER are OK to use without + * CAP_SYS_ADMIN as they do not modify the selection. */ switch (v.sel_mode) { case TIOCL_SELCLEAR: case TIOCL_SELPOINTER: - case TIOCL_SELMOUSEREPORT: break; default: if (!capable(CAP_SYS_ADMIN)) base-commit: 27102b38b8ca7ffb1622f27bcb41475d121fb67f -- 2.48.1

6 months, 3 weeks

1
1
0 0

[PATCH v2 01/22] rv: Fix out-of-bound memory access in rv_is_container_monitor()

by Nam Cao

When rv_is_container_monitor() is called on the last monitor in rv_monitors_list, KASAN yells: BUG: KASAN: global-out-of-bounds in rv_is_container_monitor+0x101/0x110 Read of size 8 at addr ffffffff97c7c798 by task setup/221 The buggy address belongs to the variable: rv_monitors_list+0x18/0x40 This is due to list_next_entry() is called on the last entry in the list. It wraps around to the first list_head, and the first list_head is not embedded in struct rv_monitor_def. Fix it by checking if the monitor is last in the list. Fixes: cb85c660fcd4 ("rv: Add option for nested monitors and include sched") Signed-off-by: Nam Cao <namcao(a)linutronix.de> Cc: stable(a)vger.kernel.org --- kernel/trace/rv/rv.c | 7 ++++++- 1 file changed, 6 insertions(+), 1 deletion(-) diff --git a/kernel/trace/rv/rv.c b/kernel/trace/rv/rv.c index 50344aa9f7f9..544acb1f6a33 100644 --- a/kernel/trace/rv/rv.c +++ b/kernel/trace/rv/rv.c @@ -225,7 +225,12 @@ bool rv_is_nested_monitor(struct rv_monitor_def *mdef) */ bool rv_is_container_monitor(struct rv_monitor_def *mdef) { - struct rv_monitor_def *next = list_next_entry(mdef, list); + struct rv_monitor_def *next; + + if (list_is_last(&mdef->list, &rv_monitors_list)) + return false; + + next = list_next_entry(mdef, list); return next->parent == mdef->monitor || !mdef->monitor->enable; } -- 2.39.5

6 months, 3 weeks

1
0
0 0

2025

2024

2023

2022

2021

2020

2019

2018

2017

Linux-stable-mirror April 2025