February 2025 - Linux-stable-mirror

[PATCH] spi: microchip-core: prevent RX overflows when transmit size > FIFO size

by Conor Dooley

From: Conor Dooley <conor.dooley(a)microchip.com> When the size of a transfer exceeds the size of the FIFO (32 bytes), RX overflows will be generated and receive data will be corrupted and warnings will be produced. For example, here's an error generated by a transfer of 36 bytes: spi_master spi0: mchp_corespi_interrupt: RX OVERFLOW: rxlen: 4, txlen: 0 I am not entirely sure how this happens, as rxlen being 4 means that 32 of 36 bytes have been read from the RX FIFO so there should be sufficient room for 4 more bytes but timing is likely a factor as simply adding a delay in the transmit path is enough to avoid the overflows. CC: stable(a)vger.kernel.org Fixes: 9ac8d17694b6 ("spi: add support for microchip fpga spi controllers") Signed-off-by: Conor Dooley <conor.dooley(a)microchip.com> --- Been sitting on this one for a bit, original reporter claims the problem isn't fixed, but it fixed the issue on my setup so I am sending the patch as it's an improvement on the status quo at the very least. CC: Conor Dooley <conor.dooley(a)microchip.com> CC: Daire McNamara <daire.mcnamara(a)microchip.com> CC: Mark Brown <broonie(a)kernel.org> CC: linux-spi(a)vger.kernel.org CC: linux-kernel(a)vger.kernel.org --- drivers/spi/spi-microchip-core.c | 7 +++++++ 1 file changed, 7 insertions(+) diff --git a/drivers/spi/spi-microchip-core.c b/drivers/spi/spi-microchip-core.c index 5b6af55855ef..3582fe8d3fc4 100644 --- a/drivers/spi/spi-microchip-core.c +++ b/drivers/spi/spi-microchip-core.c @@ -221,6 +221,13 @@ static inline void mchp_corespi_write_fifo(struct mchp_corespi *spi) while ((i < fifo_max) && !(mchp_corespi_read(spi, REG_STATUS) & STATUS_TXFIFO_FULL)) { u32 word; + /* + * If the transfer is larger than FIFO_DEPTH, spin until space + * is made in the RX FIFO to avoid losing data to RX overflows + */ + while (mchp_corespi_read(spi, REG_STATUS) & STATUS_RXFIFO_FULL) + ; + if (spi->n_bytes == 4) word = spi->tx_buf ? *((u32 *)spi->tx_buf) : 0xaa; else if (spi->n_bytes == 2) -- 2.45.2

8 months

3
6
0 0

[PATCH] ASoC: tegra: Fix ADX S24_LE audio format

by Thorsten Blum

Commit 4204eccc7b2a ("ASoC: tegra: Add support for S24_LE audio format") added support for the S24_LE audio format, but duplicated S16_LE in OUT_DAI() for ADX instead. Fix this by adding support for the S24_LE audio format. Compile-tested only. Cc: stable(a)vger.kernel.org Fixes: 4204eccc7b2a ("ASoC: tegra: Add support for S24_LE audio format") Signed-off-by: Thorsten Blum <thorsten.blum(a)linux.dev> --- sound/soc/tegra/tegra210_adx.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) diff --git a/sound/soc/tegra/tegra210_adx.c b/sound/soc/tegra/tegra210_adx.c index 3e6e8f51f380..0aa93b948378 100644 --- a/sound/soc/tegra/tegra210_adx.c +++ b/sound/soc/tegra/tegra210_adx.c @@ -264,7 +264,7 @@ static const struct snd_soc_dai_ops tegra210_adx_out_dai_ops = { .rates = SNDRV_PCM_RATE_8000_192000, \ .formats = SNDRV_PCM_FMTBIT_S8 | \ SNDRV_PCM_FMTBIT_S16_LE | \ - SNDRV_PCM_FMTBIT_S16_LE | \ + SNDRV_PCM_FMTBIT_S24_LE | \ SNDRV_PCM_FMTBIT_S32_LE, \ }, \ .capture = { \ @@ -274,7 +274,7 @@ static const struct snd_soc_dai_ops tegra210_adx_out_dai_ops = { .rates = SNDRV_PCM_RATE_8000_192000, \ .formats = SNDRV_PCM_FMTBIT_S8 | \ SNDRV_PCM_FMTBIT_S16_LE | \ - SNDRV_PCM_FMTBIT_S16_LE | \ + SNDRV_PCM_FMTBIT_S24_LE | \ SNDRV_PCM_FMTBIT_S32_LE, \ }, \ .ops = &tegra210_adx_out_dai_ops, \ -- 2.48.1

8 months

2
1
0 0

[PATCH] qlcnic: fix a memory leak in qlcnic_sriov_set_guest_vlan_mode()

by Haoxiang Li

Add qlcnic_sriov_free_vlans() to free the memory allocated by qlcnic_sriov_alloc_vlans() if "sriov->allowed_vlans" fails to be allocated. Fixes: 91b7282b613d ("qlcnic: Support VLAN id config.") Cc: stable(a)vger.kernel.org Signed-off-by: Haoxiang Li <haoxiang_li2024(a)163.com> --- drivers/net/ethernet/qlogic/qlcnic/qlcnic_sriov_common.c | 4 +++- 1 file changed, 3 insertions(+), 1 deletion(-) diff --git a/drivers/net/ethernet/qlogic/qlcnic/qlcnic_sriov_common.c b/drivers/net/ethernet/qlogic/qlcnic/qlcnic_sriov_common.c index f9dd50152b1e..2c01a9ad444f 100644 --- a/drivers/net/ethernet/qlogic/qlcnic/qlcnic_sriov_common.c +++ b/drivers/net/ethernet/qlogic/qlcnic/qlcnic_sriov_common.c @@ -454,8 +454,10 @@ static int qlcnic_sriov_set_guest_vlan_mode(struct qlcnic_adapter *adapter, num_vlans = sriov->num_allowed_vlans; sriov->allowed_vlans = kcalloc(num_vlans, sizeof(u16), GFP_KERNEL); - if (!sriov->allowed_vlans) + if (!sriov->allowed_vlans) { + qlcnic_sriov_free_vlans(adapter); return -ENOMEM; + } vlans = (u16 *)&cmd->rsp.arg[3]; for (i = 0; i < num_vlans; i++) -- 2.25.1

8 months

2
1
0 0

[PATCH 2/3] drm/xe/hmm: Don't dereference struct page pointers without notifier lock

by Thomas Hellström

The pnfs that we obtain from hmm_range_fault() point to pages that we don't have a reference on, and the guarantee that they are still in the cpu page-tables is that the notifier lock must be held and the notifier seqno is still valid. So while building the sg table and marking the pages accesses / dirty we need to hold this lock with a validated seqno. However, the lock is reclaim tainted which makes sg_alloc_table_from_pages_segment() unusable, since it internally allocates memory. Instead build the sg-table manually. For the non-iommu case this might lead to fewer coalesces, but if that's a problem it can be fixed up later in the resource cursor code. For the iommu case, the whole sg-table may still be coalesced to a single contigous device va region. This avoids marking pages that we don't own dirty and accessed, and it also avoid dereferencing struct pages that we don't own. Fixes: 81e058a3e7fd ("drm/xe: Introduce helper to populate userptr") Cc: Oak Zeng <oak.zeng(a)intel.com> Cc: <stable(a)vger.kernel.org> # v6.10+ Signed-off-by: Thomas Hellström <thomas.hellstrom(a)linux.intel.com> --- drivers/gpu/drm/xe/xe_hmm.c | 115 ++++++++++++++++++++++++++---------- 1 file changed, 85 insertions(+), 30 deletions(-) diff --git a/drivers/gpu/drm/xe/xe_hmm.c b/drivers/gpu/drm/xe/xe_hmm.c index c56738fa713b..d3b5551496d0 100644 --- a/drivers/gpu/drm/xe/xe_hmm.c +++ b/drivers/gpu/drm/xe/xe_hmm.c @@ -42,6 +42,36 @@ static void xe_mark_range_accessed(struct hmm_range *range, bool write) } } +static int xe_alloc_sg(struct sg_table *st, struct hmm_range *range, + struct rw_semaphore *notifier_sem) +{ + unsigned long i, npages, hmm_pfn; + unsigned long num_chunks = 0; + int ret; + + /* HMM docs says this is needed. */ + ret = down_read_interruptible(notifier_sem); + if (ret) + return ret; + + if (mmu_interval_read_retry(range->notifier, range->notifier_seq)) + return -EAGAIN; + + npages = xe_npages_in_range(range->start, range->end); + for (i = 0; i < npages;) { + hmm_pfn = range->hmm_pfns[i]; + if (!(hmm_pfn & HMM_PFN_VALID)) { + up_read(notifier_sem); + return -EFAULT; + } + num_chunks++; + i += 1UL << hmm_pfn_to_map_order(hmm_pfn); + } + up_read(notifier_sem); + + return sg_alloc_table(st, num_chunks, GFP_KERNEL); +} + /** * xe_build_sg() - build a scatter gather table for all the physical pages/pfn * in a hmm_range. dma-map pages if necessary. dma-address is save in sg table @@ -50,6 +80,7 @@ static void xe_mark_range_accessed(struct hmm_range *range, bool write) * @range: the hmm range that we build the sg table from. range->hmm_pfns[] * has the pfn numbers of pages that back up this hmm address range. * @st: pointer to the sg table. + * @notifier_sem: The xe notifier lock. * @write: whether we write to this range. This decides dma map direction * for system pages. If write we map it bi-diretional; otherwise * DMA_TO_DEVICE @@ -76,38 +107,33 @@ static void xe_mark_range_accessed(struct hmm_range *range, bool write) * Returns 0 if successful; -ENOMEM if fails to allocate memory */ static int xe_build_sg(struct xe_device *xe, struct hmm_range *range, - struct sg_table *st, bool write) + struct sg_table *st, + struct rw_semaphore *notifier_sem, + bool write) { struct device *dev = xe->drm.dev; - struct page **pages; - u64 i, npages; - int ret; - - npages = xe_npages_in_range(range->start, range->end); - pages = kvmalloc_array(npages, sizeof(*pages), GFP_KERNEL); - if (!pages) - return -ENOMEM; - - for (i = 0; i < npages; i++) { - pages[i] = hmm_pfn_to_page(range->hmm_pfns[i]); - xe_assert(xe, !is_device_private_page(pages[i])); - } - - ret = sg_alloc_table_from_pages_segment(st, pages, npages, 0, npages << PAGE_SHIFT, - xe_sg_segment_size(dev), GFP_KERNEL); - if (ret) - goto free_pages; - - ret = dma_map_sgtable(dev, st, write ? DMA_BIDIRECTIONAL : DMA_TO_DEVICE, - DMA_ATTR_SKIP_CPU_SYNC | DMA_ATTR_NO_KERNEL_MAPPING); - if (ret) { - sg_free_table(st); - st = NULL; + unsigned long hmm_pfn, size; + struct scatterlist *sgl; + struct page *page; + unsigned long i, j; + + lockdep_assert_held(notifier_sem); + + i = 0; + for_each_sg(st->sgl, sgl, st->nents, j) { + hmm_pfn = range->hmm_pfns[i]; + page = hmm_pfn_to_page(hmm_pfn); + xe_assert(xe, !is_device_private_page(page)); + size = 1UL << hmm_pfn_to_map_order(hmm_pfn); + sg_set_page(sgl, page, size << PAGE_SHIFT, 0); + if (unlikely(j == st->nents - 1)) + sg_mark_end(sgl); + i += size; } + xe_assert(xe, i == xe_npages_in_range(range->start, range->end)); -free_pages: - kvfree(pages); - return ret; + return dma_map_sgtable(dev, st, write ? DMA_BIDIRECTIONAL : DMA_TO_DEVICE, + DMA_ATTR_SKIP_CPU_SYNC | DMA_ATTR_NO_KERNEL_MAPPING); } /** @@ -235,16 +261,45 @@ int xe_hmm_userptr_populate_range(struct xe_userptr_vma *uvma, if (ret) goto free_pfns; - ret = xe_build_sg(vm->xe, &hmm_range, &userptr->sgt, write); + if (unlikely(userptr->sg)) { + ret = down_write_killable(&vm->userptr.notifier_lock); + if (ret) + goto free_pfns; + + xe_hmm_userptr_free_sg(uvma); + up_write(&vm->userptr.notifier_lock); + } + + ret = xe_alloc_sg(&userptr->sgt, &hmm_range, &vm->userptr.notifier_lock); if (ret) goto free_pfns; + ret = down_read_interruptible(&vm->userptr.notifier_lock); + if (ret) + goto free_st; + + if (mmu_interval_read_retry(hmm_range.notifier, hmm_range.notifier_seq)) { + ret = -EAGAIN; + goto out_unlock; + } + + ret = xe_build_sg(vm->xe, &hmm_range, &userptr->sgt, + &vm->userptr.notifier_lock, write); + if (ret) + goto out_unlock; + xe_mark_range_accessed(&hmm_range, write); userptr->sg = &userptr->sgt; userptr->notifier_seq = hmm_range.notifier_seq; + up_read(&vm->userptr.notifier_lock); + kvfree(pfns); + return 0; +out_unlock: + up_read(&vm->userptr.notifier_lock); +free_st: + sg_free_table(&userptr->sgt); free_pfns: kvfree(pfns); return ret; } - -- 2.48.1

8 months

2
4
0 0

[PATCH 6.1 0/2] erofs: handle overlapped pclusters out of crafted images properly

by Alexey Panov

Commit 9e2f9d34dd12 ("erofs: handle overlapped pclusters out of crafted images properly") fixes CVE-2024-47736 [1] but brings another problem [2]. So commit 1a2180f6859c ("erofs: fix PSI memstall accounting") should be backported too. [1] https://nvd.nist.gov/vuln/detail/CVE-2024-47736 [2] https://lore.kernel.org/all/CAKPOu+8tvSowiJADW2RuKyofL_CSkm_SuyZA7ME5vMLWmL… Gao Xiang (2): erofs: handle overlapped pclusters out of crafted images properly erofs: fix PSI memstall accounting fs/erofs/zdata.c | 66 +++++++++++++++++++++++++----------------------- 1 file changed, 34 insertions(+), 32 deletions(-) -- 2.39.5

8 months

5
12
0 0

[PATCH 1/2] USB: serial: option: add Telit Cinterion FE990B compositions

by Fabio Porcedda

Add the following Telit Cinterion FE990B40 compositions: 0x10b0: rmnet + tty (AT/NMEA) + tty (AT) + tty (AT) + tty (AT) + tty (diag) + DPL + QDSS (Qualcomm Debug SubSystem) + adb T: Bus=01 Lev=01 Prnt=01 Port=01 Cnt=01 Dev#= 7 Spd=480 MxCh= 0 D: Ver= 2.10 Cls=00(>ifc ) Sub=00 Prot=00 MxPS=64 #Cfgs= 1 P: Vendor=1bc7 ProdID=10b0 Rev=05.15 S: Manufacturer=Telit Cinterion S: Product=FE990 S: SerialNumber=28c2595e C: #Ifs= 9 Cfg#= 1 Atr=e0 MxPwr=500mA I: If#= 0 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=ff Prot=50 Driver=qmi_wwan E: Ad=01(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=81(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=82(I) Atr=03(Int.) MxPS= 8 Ivl=32ms I: If#= 1 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=ff Prot=60 Driver=option E: Ad=02(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=83(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=84(I) Atr=03(Int.) MxPS= 10 Ivl=32ms I: If#= 2 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=ff Prot=40 Driver=option E: Ad=03(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=85(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=86(I) Atr=03(Int.) MxPS= 10 Ivl=32ms I: If#= 3 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=ff Prot=40 Driver=option E: Ad=04(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=87(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=88(I) Atr=03(Int.) MxPS= 10 Ivl=32ms I: If#= 4 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=ff Prot=40 Driver=option E: Ad=05(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=89(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=8a(I) Atr=03(Int.) MxPS= 10 Ivl=32ms I: If#= 5 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=ff Prot=30 Driver=option E: Ad=06(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=8b(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms I: If#= 6 Alt= 0 #EPs= 1 Cls=ff(vend.) Sub=ff Prot=80 Driver=(none) E: Ad=8c(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms I: If#= 7 Alt= 0 #EPs= 1 Cls=ff(vend.) Sub=ff Prot=70 Driver=(none) E: Ad=8d(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms I: If#= 8 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=42 Prot=01 Driver=(none) E: Ad=07(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=8e(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms 0x10b1: MBIM + tty (AT/NMEA) + tty (AT) + tty (AT) + tty (AT) + tty (diag) + DPL + QDSS (Qualcomm Debug SubSystem) + adb T: Bus=01 Lev=01 Prnt=01 Port=01 Cnt=01 Dev#= 8 Spd=480 MxCh= 0 D: Ver= 2.10 Cls=00(>ifc ) Sub=00 Prot=00 MxPS=64 #Cfgs= 1 P: Vendor=1bc7 ProdID=10b1 Rev=05.15 S: Manufacturer=Telit Cinterion S: Product=FE990 S: SerialNumber=28c2595e C: #Ifs=10 Cfg#= 1 Atr=e0 MxPwr=500mA I: If#= 0 Alt= 0 #EPs= 1 Cls=02(commc) Sub=0e Prot=00 Driver=cdc_mbim E: Ad=82(I) Atr=03(Int.) MxPS= 64 Ivl=32ms I: If#= 1 Alt= 1 #EPs= 2 Cls=0a(data ) Sub=00 Prot=02 Driver=cdc_mbim E: Ad=01(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=81(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms I: If#= 2 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=ff Prot=60 Driver=option E: Ad=02(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=83(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=84(I) Atr=03(Int.) MxPS= 10 Ivl=32ms I: If#= 3 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=ff Prot=40 Driver=option E: Ad=03(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=85(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=86(I) Atr=03(Int.) MxPS= 10 Ivl=32ms I: If#= 4 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=ff Prot=40 Driver=option E: Ad=04(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=87(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=88(I) Atr=03(Int.) MxPS= 10 Ivl=32ms I: If#= 5 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=ff Prot=40 Driver=option E: Ad=05(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=89(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=8a(I) Atr=03(Int.) MxPS= 10 Ivl=32ms I: If#= 6 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=ff Prot=30 Driver=option E: Ad=06(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=8b(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms I: If#= 7 Alt= 0 #EPs= 1 Cls=ff(vend.) Sub=ff Prot=80 Driver=(none) E: Ad=8c(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms I: If#= 8 Alt= 0 #EPs= 1 Cls=ff(vend.) Sub=ff Prot=70 Driver=(none) E: Ad=8d(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms I: If#= 9 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=42 Prot=01 Driver=(none) E: Ad=07(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=8e(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms 0x10b2: RNDIS + tty (AT/NMEA) + tty (AT) + tty (AT) + tty (AT) + tty (diag) + DPL + QDSS (Qualcomm Debug SubSystem) + adb T: Bus=01 Lev=01 Prnt=01 Port=01 Cnt=01 Dev#= 9 Spd=480 MxCh= 0 D: Ver= 2.10 Cls=00(>ifc ) Sub=00 Prot=00 MxPS=64 #Cfgs= 1 P: Vendor=1bc7 ProdID=10b2 Rev=05.15 S: Manufacturer=Telit Cinterion S: Product=FE990 S: SerialNumber=28c2595e C: #Ifs=10 Cfg#= 1 Atr=e0 MxPwr=500mA I: If#= 0 Alt= 0 #EPs= 1 Cls=ef(misc ) Sub=04 Prot=01 Driver=rndis_host E: Ad=82(I) Atr=03(Int.) MxPS= 8 Ivl=32ms I: If#= 1 Alt= 0 #EPs= 2 Cls=0a(data ) Sub=00 Prot=00 Driver=rndis_host E: Ad=01(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=81(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms I: If#= 2 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=ff Prot=60 Driver=option E: Ad=02(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=83(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=84(I) Atr=03(Int.) MxPS= 10 Ivl=32ms I: If#= 3 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=ff Prot=40 Driver=option E: Ad=03(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=85(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=86(I) Atr=03(Int.) MxPS= 10 Ivl=32ms I: If#= 4 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=ff Prot=40 Driver=option E: Ad=04(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=87(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=88(I) Atr=03(Int.) MxPS= 10 Ivl=32ms I: If#= 5 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=ff Prot=40 Driver=option E: Ad=05(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=89(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=8a(I) Atr=03(Int.) MxPS= 10 Ivl=32ms I: If#= 6 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=ff Prot=30 Driver=option E: Ad=06(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=8b(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms I: If#= 7 Alt= 0 #EPs= 1 Cls=ff(vend.) Sub=ff Prot=80 Driver=(none) E: Ad=8c(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms I: If#= 8 Alt= 0 #EPs= 1 Cls=ff(vend.) Sub=ff Prot=70 Driver=(none) E: Ad=8d(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms I: If#= 9 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=42 Prot=01 Driver=(none) E: Ad=07(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=8e(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms 0x10d3: ECM + tty (AT/NMEA) + tty (AT) + tty (AT) + tty (AT) + tty (diag) + DPL + QDSS (Qualcomm Debug SubSystem) + adb T: Bus=01 Lev=01 Prnt=01 Port=01 Cnt=01 Dev#= 11 Spd=480 MxCh= 0 D: Ver= 2.10 Cls=00(>ifc ) Sub=00 Prot=00 MxPS=64 #Cfgs= 1 P: Vendor=1bc7 ProdID=10b3 Rev=05.15 S: Manufacturer=Telit Cinterion S: Product=FE990 S: SerialNumber=28c2595e C: #Ifs=10 Cfg#= 1 Atr=e0 MxPwr=500mA I: If#= 0 Alt= 0 #EPs= 1 Cls=02(commc) Sub=06 Prot=00 Driver=cdc_ether E: Ad=82(I) Atr=03(Int.) MxPS= 16 Ivl=32ms I: If#= 1 Alt= 1 #EPs= 2 Cls=0a(data ) Sub=00 Prot=00 Driver=cdc_ether E: Ad=01(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=81(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms I: If#= 2 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=ff Prot=60 Driver=option E: Ad=02(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=83(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=84(I) Atr=03(Int.) MxPS= 10 Ivl=32ms I: If#= 3 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=ff Prot=40 Driver=option E: Ad=03(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=85(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=86(I) Atr=03(Int.) MxPS= 10 Ivl=32ms I: If#= 4 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=ff Prot=40 Driver=option E: Ad=04(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=87(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=88(I) Atr=03(Int.) MxPS= 10 Ivl=32ms I: If#= 5 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=ff Prot=40 Driver=option E: Ad=05(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=89(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=8a(I) Atr=03(Int.) MxPS= 10 Ivl=32ms I: If#= 6 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=ff Prot=30 Driver=option E: Ad=06(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=8b(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms I: If#= 7 Alt= 0 #EPs= 1 Cls=ff(vend.) Sub=ff Prot=80 Driver=(none) E: Ad=8c(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms I: If#= 8 Alt= 0 #EPs= 1 Cls=ff(vend.) Sub=ff Prot=70 Driver=(none) E: Ad=8d(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms I: If#= 9 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=42 Prot=01 Driver=(none) E: Ad=07(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=8e(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms Cc: stable(a)vger.kernel.org Signed-off-by: Fabio Porcedda <fabio.porcedda(a)gmail.com> --- drivers/usb/serial/option.c | 16 ++++++++++++++++ 1 file changed, 16 insertions(+) diff --git a/drivers/usb/serial/option.c b/drivers/usb/serial/option.c index 58bd54e8c483..8660f7a89b01 100644 --- a/drivers/usb/serial/option.c +++ b/drivers/usb/serial/option.c @@ -1388,6 +1388,22 @@ static const struct usb_device_id option_ids[] = { .driver_info = RSVD(0) | NCTRL(2) | RSVD(3) | RSVD(4) }, { USB_DEVICE_INTERFACE_CLASS(TELIT_VENDOR_ID, 0x10aa, 0xff), /* Telit FN920C04 (MBIM) */ .driver_info = NCTRL(3) | RSVD(4) | RSVD(5) }, + { USB_DEVICE_INTERFACE_PROTOCOL(TELIT_VENDOR_ID, 0x10b0, 0x60) }, /* Telit FE990B (rmnet) */ + { USB_DEVICE_INTERFACE_PROTOCOL(TELIT_VENDOR_ID, 0x10b0, 0x40) }, + { USB_DEVICE_INTERFACE_PROTOCOL(TELIT_VENDOR_ID, 0x10b0, 0x30), + .driver_info = NCTRL(5) }, + { USB_DEVICE_INTERFACE_PROTOCOL(TELIT_VENDOR_ID, 0x10b1, 0x60) }, /* Telit FE990B (MBIM) */ + { USB_DEVICE_INTERFACE_PROTOCOL(TELIT_VENDOR_ID, 0x10b1, 0x40) }, + { USB_DEVICE_INTERFACE_PROTOCOL(TELIT_VENDOR_ID, 0x10b1, 0x30), + .driver_info = NCTRL(6) }, + { USB_DEVICE_INTERFACE_PROTOCOL(TELIT_VENDOR_ID, 0x10b2, 0x60) }, /* Telit FE990B (RNDIS) */ + { USB_DEVICE_INTERFACE_PROTOCOL(TELIT_VENDOR_ID, 0x10b2, 0x40) }, + { USB_DEVICE_INTERFACE_PROTOCOL(TELIT_VENDOR_ID, 0x10b2, 0x30), + .driver_info = NCTRL(6) }, + { USB_DEVICE_INTERFACE_PROTOCOL(TELIT_VENDOR_ID, 0x10b3, 0x60) }, /* Telit FE990B (ECM) */ + { USB_DEVICE_INTERFACE_PROTOCOL(TELIT_VENDOR_ID, 0x10b3, 0x40) }, + { USB_DEVICE_INTERFACE_PROTOCOL(TELIT_VENDOR_ID, 0x10b3, 0x30), + .driver_info = NCTRL(6) }, { USB_DEVICE_INTERFACE_CLASS(TELIT_VENDOR_ID, 0x10c0, 0xff), /* Telit FE910C04 (rmnet) */ .driver_info = RSVD(0) | NCTRL(3) }, { USB_DEVICE_INTERFACE_CLASS(TELIT_VENDOR_ID, 0x10c4, 0xff), /* Telit FE910C04 (rmnet) */ -- 2.48.1

8 months

2
2
0 0

[PATCH v8] arm64: mm: Populate vmemmap at the page level if not section aligned

by Zhenhua Huang

On the arm64 platform with 4K base page config, SECTION_SIZE_BITS is set to 27, making one section 128M. The related page struct which vmemmap points to is 2M then. Commit c1cc1552616d ("arm64: MMU initialisation") optimizes the vmemmap to populate at the PMD section level which was suitable initially since hot plug granule is always one section(128M). However, commit ba72b4c8cf60 ("mm/sparsemem: support sub-section hotplug") introduced a 2M(SUBSECTION_SIZE) hot plug granule, which disrupted the existing arm64 assumptions. The first problem is that if start or end is not aligned to a section boundary, such as when a subsection is hot added, populating the entire section is wasteful. The next problem is if we hotplug something that spans part of 128 MiB section (subsections, let's call it memblock1), and then hotplug something that spans another part of a 128 MiB section(subsections, let's call it memblock2), and subsequently unplug memblock1, vmemmap_free() will clear the entire PMD entry which also supports memblock2 even though memblock2 is still active. Assuming hotplug/unplug sizes are guaranteed to be symmetric. Do the fix similar to x86-64: populate to pages levels if start/end is not aligned with section boundary. Cc: <stable(a)vger.kernel.org> # v5.4+ Fixes: ba72b4c8cf60 ("mm/sparsemem: support sub-section hotplug") Signed-off-by: Zhenhua Huang <quic_zhenhuah(a)quicinc.com> --- Hi Catalin and David, Following our latest discussion, I've updated the patch for your review. I also removed Catalin's review tag since I've made significant modifications. arch/arm64/mm/mmu.c | 5 ++++- 1 file changed, 4 insertions(+), 1 deletion(-) diff --git a/arch/arm64/mm/mmu.c b/arch/arm64/mm/mmu.c index b4df5bc5b1b8..de05ccf47f21 100644 --- a/arch/arm64/mm/mmu.c +++ b/arch/arm64/mm/mmu.c @@ -1177,8 +1177,11 @@ int __meminit vmemmap_populate(unsigned long start, unsigned long end, int node, struct vmem_altmap *altmap) { WARN_ON((start < VMEMMAP_START) || (end > VMEMMAP_END)); + /* [start, end] should be within one section */ + WARN_ON(end - start > PAGES_PER_SECTION * sizeof(struct page)); - if (!IS_ENABLED(CONFIG_ARM64_4K_PAGES)) + if (!IS_ENABLED(CONFIG_ARM64_4K_PAGES) || + (end - start < PAGES_PER_SECTION * sizeof(struct page))) return vmemmap_populate_basepages(start, end, node, altmap); else return vmemmap_populate_hugepages(start, end, node, altmap); -- 2.25.1

8 months

2
2
0 0

[PATCH] usb: dwc3: Set SUSPENDENABLE soon after phy init

by Thinh Nguyen

After phy initialization, some phy operations can only be executed while in lower P states. Ensure GUSB3PIPECTL.SUSPENDENABLE and GUSB2PHYCFG.SUSPHY are set soon after initialization to avoid blocking phy ops. Previously the SUSPENDENABLE bits are only set after the controller initialization, which may not happen right away if there's no gadget driver or xhci driver bound. Revise this to clear SUSPENDENABLE bits only when there's mode switching (change in GCTL.PRTCAPDIR). Fixes: 6d735722063a ("usb: dwc3: core: Prevent phy suspend during init") Cc: stable(a)vger.kernel.org Signed-off-by: Thinh Nguyen <Thinh.Nguyen(a)synopsys.com> --- drivers/usb/dwc3/core.c | 69 +++++++++++++++++++++++++---------------- drivers/usb/dwc3/core.h | 2 +- drivers/usb/dwc3/drd.c | 4 +-- 3 files changed, 45 insertions(+), 30 deletions(-) diff --git a/drivers/usb/dwc3/core.c b/drivers/usb/dwc3/core.c index dfa1b5fe48dc..87b4c04a868c 100644 --- a/drivers/usb/dwc3/core.c +++ b/drivers/usb/dwc3/core.c @@ -131,11 +131,24 @@ void dwc3_enable_susphy(struct dwc3 *dwc, bool enable) } } -void dwc3_set_prtcap(struct dwc3 *dwc, u32 mode) +void dwc3_set_prtcap(struct dwc3 *dwc, u32 mode, bool ignore_susphy) { + unsigned int hw_mode; u32 reg; reg = dwc3_readl(dwc->regs, DWC3_GCTL); + + /* + * For DRD controllers, GUSB3PIPECTL.SUSPENDENABLE and + * GUSB2PHYCFG.SUSPHY should be cleared during mode switching, + * and they can be set after core initialization. + */ + hw_mode = DWC3_GHWPARAMS0_MODE(dwc->hwparams.hwparams0); + if (hw_mode == DWC3_GHWPARAMS0_MODE_DRD && !ignore_susphy) { + if (DWC3_GCTL_PRTCAP(reg) != mode) + dwc3_enable_susphy(dwc, false); + } + reg &= ~(DWC3_GCTL_PRTCAPDIR(DWC3_GCTL_PRTCAP_OTG)); reg |= DWC3_GCTL_PRTCAPDIR(mode); dwc3_writel(dwc->regs, DWC3_GCTL, reg); @@ -216,7 +229,7 @@ static void __dwc3_set_mode(struct work_struct *work) spin_lock_irqsave(&dwc->lock, flags); - dwc3_set_prtcap(dwc, desired_dr_role); + dwc3_set_prtcap(dwc, desired_dr_role, false); spin_unlock_irqrestore(&dwc->lock, flags); @@ -658,16 +671,7 @@ static int dwc3_ss_phy_setup(struct dwc3 *dwc, int index) */ reg &= ~DWC3_GUSB3PIPECTL_UX_EXIT_PX; - /* - * Above DWC_usb3.0 1.94a, it is recommended to set - * DWC3_GUSB3PIPECTL_SUSPHY to '0' during coreConsultant configuration. - * So default value will be '0' when the core is reset. Application - * needs to set it to '1' after the core initialization is completed. - * - * Similarly for DRD controllers, GUSB3PIPECTL.SUSPENDENABLE must be - * cleared after power-on reset, and it can be set after core - * initialization. - */ + /* Ensure the GUSB3PIPECTL.SUSPENDENABLE is cleared prior to phy init. */ reg &= ~DWC3_GUSB3PIPECTL_SUSPHY; if (dwc->u2ss_inp3_quirk) @@ -747,15 +751,7 @@ static int dwc3_hs_phy_setup(struct dwc3 *dwc, int index) break; } - /* - * Above DWC_usb3.0 1.94a, it is recommended to set - * DWC3_GUSB2PHYCFG_SUSPHY to '0' during coreConsultant configuration. - * So default value will be '0' when the core is reset. Application - * needs to set it to '1' after the core initialization is completed. - * - * Similarly for DRD controllers, GUSB2PHYCFG.SUSPHY must be cleared - * after power-on reset, and it can be set after core initialization. - */ + /* Ensure the GUSB2PHYCFG.SUSPHY is cleared prior to phy init. */ reg &= ~DWC3_GUSB2PHYCFG_SUSPHY; if (dwc->dis_enblslpm_quirk) @@ -830,6 +826,25 @@ static int dwc3_phy_init(struct dwc3 *dwc) goto err_exit_usb3_phy; } + /* + * Above DWC_usb3.0 1.94a, it is recommended to set + * DWC3_GUSB3PIPECTL_SUSPHY and DWC3_GUSB2PHYCFG_SUSPHY to '0' during + * coreConsultant configuration. So default value will be '0' when the + * core is reset. Application needs to set it to '1' after the core + * initialization is completed. + * + * Certain phy requires to be in P0 power state during initialization. + * Make sure GUSB3PIPECTL.SUSPENDENABLE and GUSB2PHYCFG.SUSPHY are clear + * prior to phy init to maintain in the P0 state. + * + * After phy initialization, some phy operations can only be executed + * while in lower P states. Ensure GUSB3PIPECTL.SUSPENDENABLE and + * GUSB2PHYCFG.SUSPHY are set soon after initialization to avoid + * blocking phy ops. + */ + if (!DWC3_VER_IS_WITHIN(DWC3, ANY, 194A)) + dwc3_enable_susphy(dwc, true); + return 0; err_exit_usb3_phy: @@ -1588,7 +1603,7 @@ static int dwc3_core_init_mode(struct dwc3 *dwc) switch (dwc->dr_mode) { case USB_DR_MODE_PERIPHERAL: - dwc3_set_prtcap(dwc, DWC3_GCTL_PRTCAP_DEVICE); + dwc3_set_prtcap(dwc, DWC3_GCTL_PRTCAP_DEVICE, false); if (dwc->usb2_phy) otg_set_vbus(dwc->usb2_phy->otg, false); @@ -1600,7 +1615,7 @@ static int dwc3_core_init_mode(struct dwc3 *dwc) return dev_err_probe(dev, ret, "failed to initialize gadget\n"); break; case USB_DR_MODE_HOST: - dwc3_set_prtcap(dwc, DWC3_GCTL_PRTCAP_HOST); + dwc3_set_prtcap(dwc, DWC3_GCTL_PRTCAP_HOST, false); if (dwc->usb2_phy) otg_set_vbus(dwc->usb2_phy->otg, true); @@ -1645,7 +1660,7 @@ static void dwc3_core_exit_mode(struct dwc3 *dwc) } /* de-assert DRVVBUS for HOST and OTG mode */ - dwc3_set_prtcap(dwc, DWC3_GCTL_PRTCAP_DEVICE); + dwc3_set_prtcap(dwc, DWC3_GCTL_PRTCAP_DEVICE, true); } static void dwc3_get_software_properties(struct dwc3 *dwc) @@ -2457,7 +2472,7 @@ static int dwc3_resume_common(struct dwc3 *dwc, pm_message_t msg) if (ret) return ret; - dwc3_set_prtcap(dwc, DWC3_GCTL_PRTCAP_DEVICE); + dwc3_set_prtcap(dwc, DWC3_GCTL_PRTCAP_DEVICE, true); dwc3_gadget_resume(dwc); break; case DWC3_GCTL_PRTCAP_HOST: @@ -2465,7 +2480,7 @@ static int dwc3_resume_common(struct dwc3 *dwc, pm_message_t msg) ret = dwc3_core_init_for_resume(dwc); if (ret) return ret; - dwc3_set_prtcap(dwc, DWC3_GCTL_PRTCAP_HOST); + dwc3_set_prtcap(dwc, DWC3_GCTL_PRTCAP_HOST, true); break; } /* Restore GUSB2PHYCFG bits that were modified in suspend */ @@ -2494,7 +2509,7 @@ static int dwc3_resume_common(struct dwc3 *dwc, pm_message_t msg) if (ret) return ret; - dwc3_set_prtcap(dwc, dwc->current_dr_role); + dwc3_set_prtcap(dwc, dwc->current_dr_role, true); dwc3_otg_init(dwc); if (dwc->current_otg_role == DWC3_OTG_ROLE_HOST) { diff --git a/drivers/usb/dwc3/core.h b/drivers/usb/dwc3/core.h index ac7c730f81ac..19ad5b6e1ede 100644 --- a/drivers/usb/dwc3/core.h +++ b/drivers/usb/dwc3/core.h @@ -1557,7 +1557,7 @@ struct dwc3_gadget_ep_cmd_params { #define DWC3_HAS_OTG BIT(3) /* prototypes */ -void dwc3_set_prtcap(struct dwc3 *dwc, u32 mode); +void dwc3_set_prtcap(struct dwc3 *dwc, u32 mode, bool ignore_susphy); void dwc3_set_mode(struct dwc3 *dwc, u32 mode); u32 dwc3_core_fifo_space(struct dwc3_ep *dep, u8 type); diff --git a/drivers/usb/dwc3/drd.c b/drivers/usb/dwc3/drd.c index d76ae676783c..7977860932b1 100644 --- a/drivers/usb/dwc3/drd.c +++ b/drivers/usb/dwc3/drd.c @@ -173,7 +173,7 @@ void dwc3_otg_init(struct dwc3 *dwc) * block "Initialize GCTL for OTG operation". */ /* GCTL.PrtCapDir=2'b11 */ - dwc3_set_prtcap(dwc, DWC3_GCTL_PRTCAP_OTG); + dwc3_set_prtcap(dwc, DWC3_GCTL_PRTCAP_OTG, true); /* GUSB2PHYCFG0.SusPHY=0 */ reg = dwc3_readl(dwc->regs, DWC3_GUSB2PHYCFG(0)); reg &= ~DWC3_GUSB2PHYCFG_SUSPHY; @@ -556,7 +556,7 @@ int dwc3_drd_init(struct dwc3 *dwc) dwc3_drd_update(dwc); } else { - dwc3_set_prtcap(dwc, DWC3_GCTL_PRTCAP_OTG); + dwc3_set_prtcap(dwc, DWC3_GCTL_PRTCAP_OTG, true); /* use OTG block to get ID event */ irq = dwc3_otg_get_irq(dwc); base-commit: 72deda0abee6e705ae71a93f69f55e33be5bca5c -- 2.28.0

8 months

2
2
0 0

[PATCH v4 0/2] rust: lockdep: Fix soundness issue affecting LockClassKeys

by Mitchell Levy

This series is aimed at fixing a soundness issue with how dynamically allocated LockClassKeys are handled. Currently, LockClassKeys can be used without being Pin'd, which can break lockdep since it relies on address stability. Similarly, these keys are not automatically (de)registered with lockdep. At the suggestion of Alice Ryhl, this series includes a patch for -stable kernels that disables dynamically allocated keys. This prevents backported patches from using the unsound implementation. Currently, this series requires that all dynamically allocated LockClassKeys have a lifetime of 'static (i.e., they must be leaked after allocation). This is because Lock does not currently keep a reference to the LockClassKey, instead passing it to C via FFI. This causes a problem because the rust compiler would allow creating a 'static Lock with a 'a LockClassKey (with 'a < 'static) while C would expect the LockClassKey to live as long as the lock. This problem represents an avenue for future work. --- Changes in v4: - Expand the cover letter in the 2nd patch to explain why Pin is used despite being redundant at the moment (Thanks Benno Lossin). - Include a Fixes tag in the 1st patch (Thanks Miguel Ojeda). - Link to v3: https://lore.kernel.org/r/20250205-rust-lockdep-v3-0-5313e83a0bef@gmail.com Changes in v3: - Rebased on rust-next - Fixed clippy/compiler warninings (Thanks Boqun Feng) - Link to v2: https://lore.kernel.org/r/20241219-rust-lockdep-v2-0-f65308fbc5ca@gmail.com Changes in v2: - Dropped formatting change that's already fixed upstream (Thanks Dirk Behme). - Moved safety comment to the right point in the patch series (Thanks Dirk Behme and Boqun Feng). - Added an example of dynamic LockClassKey usage (Thanks Boqun Feng). - Link to v1: https://lore.kernel.org/r/20241004-rust-lockdep-v1-0-e9a5c45721fc@gmail.com Changes from RFC: - Split into two commits so that dynamically allocated LockClassKeys are removed from stable kernels. (Thanks Alice Ryhl) - Extract calls to C lockdep functions into helpers so things build properly when LOCKDEP=n. (Thanks Benno Lossin) - Remove extraneous `get_ref()` calls. (Thanks Benno Lossin) - Provide better documentation for `new_dynamic()`. (Thanks Benno Lossin) - Ran rustfmt to fix formatting and some extraneous changes. (Thanks Alice Ryhl and Benno Lossin) - Link to RFC: https://lore.kernel.org/r/20240905-rust-lockdep-v1-1-d2c9c21aa8b2@gmail.com --- Mitchell Levy (2): rust: lockdep: Remove support for dynamically allocated LockClassKeys rust: lockdep: Use Pin for all LockClassKey usages rust/helpers/helpers.c | 1 + rust/helpers/sync.c | 13 +++++++++ rust/kernel/sync.rs | 63 ++++++++++++++++++++++++++++++++++------- rust/kernel/sync/condvar.rs | 5 ++-- rust/kernel/sync/lock.rs | 9 ++---- rust/kernel/sync/lock/global.rs | 5 ++-- rust/kernel/sync/poll.rs | 2 +- rust/kernel/workqueue.rs | 2 +- 8 files changed, 77 insertions(+), 23 deletions(-) --- base-commit: beeb78d46249cab8b2b8359a2ce8fa5376b5ad2d change-id: 20240905-rust-lockdep-d3e30521c8ba Best regards, -- Mitchell Levy <levymitchell0(a)gmail.com>

8 months

2
2
0 0

[PATCH] mailbox: tegra-hsp: Add check for devm_kstrdup_const()

by Haoxiang Li

Add check for the return value of devm_kstrdup_const() in tegra_hsp_doorbell_create() to catch potential exception. Fixes: a54d03ed01b4 ("mailbox: tegra-hsp: use devm_kstrdup_const()") Cc: stable(a)vger.kernel.org Signed-off-by: Haoxiang Li <haoxiang_li2024(a)163.com> --- drivers/mailbox/tegra-hsp.c | 2 ++ 1 file changed, 2 insertions(+) diff --git a/drivers/mailbox/tegra-hsp.c b/drivers/mailbox/tegra-hsp.c index c1981f091bd1..773a1cf6d93d 100644 --- a/drivers/mailbox/tegra-hsp.c +++ b/drivers/mailbox/tegra-hsp.c @@ -285,6 +285,8 @@ tegra_hsp_doorbell_create(struct tegra_hsp *hsp, const char *name, db->channel.hsp = hsp; db->name = devm_kstrdup_const(hsp->dev, name, GFP_KERNEL); + if (!db->name) + return ERR_PTR(-ENOMEM); db->master = master; db->index = index; -- 2.25.1

8 months

3
2
0 0

2025

2024

2023

2022

2021

2020

2019

2018

2017

Linux-stable-mirror February 2025