November 2025 - Linux-stable-mirror

[PATCH 5.15.y] mm/ksm: fix flag-dropping behavior in ksm_madvise

by Jakub Acs

[ Upstream commit f04aad36a07cc17b7a5d5b9a2d386ce6fae63e93 ] syzkaller discovered the following crash: (kernel BUG) [ 44.607039] ------------[ cut here ]------------ [ 44.607422] kernel BUG at mm/userfaultfd.c:2067! [ 44.608148] Oops: invalid opcode: 0000 [#1] SMP DEBUG_PAGEALLOC KASAN NOPTI [ 44.608814] CPU: 1 UID: 0 PID: 2475 Comm: reproducer Not tainted 6.16.0-rc6 #1 PREEMPT(none) [ 44.609635] Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS rel-1.16.3-0-ga6ed6b701f0a-prebuilt.qemu.org 04/01/2014 [ 44.610695] RIP: 0010:userfaultfd_release_all+0x3a8/0x460 <snip other registers, drop unreliable trace> [ 44.617726] Call Trace: [ 44.617926] <TASK> [ 44.619284] userfaultfd_release+0xef/0x1b0 [ 44.620976] __fput+0x3f9/0xb60 [ 44.621240] fput_close_sync+0x110/0x210 [ 44.622222] __x64_sys_close+0x8f/0x120 [ 44.622530] do_syscall_64+0x5b/0x2f0 [ 44.622840] entry_SYSCALL_64_after_hwframe+0x76/0x7e [ 44.623244] RIP: 0033:0x7f365bb3f227 Kernel panics because it detects UFFD inconsistency during userfaultfd_release_all(). Specifically, a VMA which has a valid pointer to vma->vm_userfaultfd_ctx, but no UFFD flags in vma->vm_flags. The inconsistency is caused in ksm_madvise(): when user calls madvise() with MADV_UNMEARGEABLE on a VMA that is registered for UFFD in MINOR mode, it accidentally clears all flags stored in the upper 32 bits of vma->vm_flags. Assuming x86_64 kernel build, unsigned long is 64-bit and unsigned int and int are 32-bit wide. This setup causes the following mishap during the &= ~VM_MERGEABLE assignment. VM_MERGEABLE is a 32-bit constant of type unsigned int, 0x8000'0000. After ~ is applied, it becomes 0x7fff'ffff unsigned int, which is then promoted to unsigned long before the & operation. This promotion fills upper 32 bits with leading 0s, as we're doing unsigned conversion (and even for a signed conversion, this wouldn't help as the leading bit is 0). & operation thus ends up AND-ing vm_flags with 0x0000'0000'7fff'ffff instead of intended 0xffff'ffff'7fff'ffff and hence accidentally clears the upper 32-bits of its value. Fix it by changing `VM_MERGEABLE` constant to unsigned long, using the BIT() macro. Note: other VM_* flags are not affected: This only happens to the VM_MERGEABLE flag, as the other VM_* flags are all constants of type int and after ~ operation, they end up with leading 1 and are thus converted to unsigned long with leading 1s. Note 2: After commit 31defc3b01d9 ("userfaultfd: remove (VM_)BUG_ON()s"), this is no longer a kernel BUG, but a WARNING at the same place: [ 45.595973] WARNING: CPU: 1 PID: 2474 at mm/userfaultfd.c:2067 but the root-cause (flag-drop) remains the same. [akpm(a)linux-foundation.org: rust bindgen wasn't able to handle BIT(), from Miguel] Link: https://lore.kernel.org/oe-kbuild-all/202510030449.VfSaAjvd-lkp@intel.com/ Link: https://lkml.kernel.org/r/20251001090353.57523-2-acsjakub@amazon.de Fixes: 7677f7fd8be7 ("userfaultfd: add minor fault registration mode") Signed-off-by: Jakub Acs <acsjakub(a)amazon.de> Signed-off-by: Miguel Ojeda <miguel.ojeda.sandonis(a)gmail.com> Acked-by: David Hildenbrand <david(a)redhat.com> Acked-by: SeongJae Park <sj(a)kernel.org> Tested-by: Alice Ryhl <aliceryhl(a)google.com> Tested-by: Miguel Ojeda <miguel.ojeda.sandonis(a)gmail.com> Cc: Xu Xin <xu.xin16(a)zte.com.cn> Cc: Chengming Zhou <chengming.zhou(a)linux.dev> Cc: Peter Xu <peterx(a)redhat.com> Cc: Axel Rasmussen <axelrasmussen(a)google.com> Cc: <stable(a)vger.kernel.org> Signed-off-by: Andrew Morton <akpm(a)linux-foundation.org> [ acsjakub: drop rust-compatibility change (no rust in 5.15) ] Signed-off-by: Jakub Acs <acsjakub(a)amazon.de> --- Why sending to stable version from before "fixes"? In the original patch, I set fixes tag to the change that allows the panic to manifest, not to the one that is real root-cause of the problem. The change that introduced the root-cause of the problem is: f8af4da3b4c1 ("ksm: the mm interface to ksm"), as pointed out by Vlastimil in [1]. Hence, as the older kernels can be affected by the flag-drop as well, backport to older kernels. [1]: https://lore.kernel.org/all/13c7242e-3a40-469b-9e99-8a65a21449bb@suse.cz/ include/linux/mm.h | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/include/linux/mm.h b/include/linux/mm.h index 3598925561b1..071dd864a7b2 100644 --- a/include/linux/mm.h +++ b/include/linux/mm.h @@ -310,7 +310,7 @@ extern unsigned int kobjsize(const void *objp); #define VM_MIXEDMAP 0x10000000 /* Can contain "struct page" and pure PFN pages */ #define VM_HUGEPAGE 0x20000000 /* MADV_HUGEPAGE marked this vma */ #define VM_NOHUGEPAGE 0x40000000 /* MADV_NOHUGEPAGE marked this vma */ -#define VM_MERGEABLE 0x80000000 /* KSM may merge identical pages */ +#define VM_MERGEABLE BIT(31) /* KSM may merge identical pages */ #ifdef CONFIG_ARCH_USES_HIGH_VMA_FLAGS #define VM_HIGH_ARCH_BIT_0 32 /* bit only usable on 64-bit architectures */ -- 2.47.3 Amazon Web Services Development Center Germany GmbH Tamara-Danz-Str. 13 10243 Berlin Geschaeftsfuehrung: Christian Schlaeger, Christof Hellmis Eingetragen am Amtsgericht Charlottenburg unter HRB 257764 B Sitz: Berlin Ust-ID: DE 365 538 597

1 month

2
1
0 0

FAILED: patch "[PATCH] mptcp: pm: in-kernel: C-flag: handle late ADD_ADDR" failed to apply to 5.15-stable tree

by gregkh＠linuxfoundation.org

The patch below does not apply to the 5.15-stable tree. If someone wants it applied there, or to any other stable or longterm tree, then please email the backport, including the original git commit id to <stable(a)vger.kernel.org>. To reproduce the conflict and resubmit, you may use the following commands: git fetch https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git/ linux-5.15.y git checkout FETCH_HEAD git cherry-pick -x e84cb860ac3ce67ec6ecc364433fd5b412c448bc # <resolve conflicts, build, test, etc.> git commit -s git send-email --to '<stable(a)vger.kernel.org>' --in-reply-to '2025102646-unwary-premises-4a2c@gregkh' --subject-prefix 'PATCH 5.15.y' HEAD^.. Possible dependencies: thanks, greg k-h ------------------ original commit in Linus's tree ------------------ From e84cb860ac3ce67ec6ecc364433fd5b412c448bc Mon Sep 17 00:00:00 2001 From: "Matthieu Baerts (NGI0)" <matttbe(a)kernel.org> Date: Mon, 20 Oct 2025 22:53:26 +0200 Subject: [PATCH] mptcp: pm: in-kernel: C-flag: handle late ADD_ADDR The special C-flag case expects the ADD_ADDR to be received when switching to 'fully-established'. But for various reasons, the ADD_ADDR could be sent after the "4th ACK", and the special case doesn't work. On NIPA, the new test validating this special case for the C-flag failed a few times, e.g. 102 default limits, server deny join id 0 syn rx [FAIL] got 0 JOIN[s] syn rx expected 2 Server ns stats (...) MPTcpExtAddAddrTx 1 MPTcpExtEchoAdd 1 Client ns stats (...) MPTcpExtAddAddr 1 MPTcpExtEchoAddTx 1 synack rx [FAIL] got 0 JOIN[s] synack rx expected 2 ack rx [FAIL] got 0 JOIN[s] ack rx expected 2 join Rx [FAIL] see above syn tx [FAIL] got 0 JOIN[s] syn tx expected 2 join Tx [FAIL] see above I had a suspicion about what the issue could be: the ADD_ADDR might have been received after the switch to the 'fully-established' state. The issue was not easy to reproduce. The packet capture shown that the ADD_ADDR can indeed be sent with a delay, and the client would not try to establish subflows to it as expected. A simple fix is not to mark the endpoints as 'used' in the C-flag case, when looking at creating subflows to the remote initial IP address and port. In this case, there is no need to try. Note: newly added fullmesh endpoints will still continue to be used as expected, thanks to the conditions behind mptcp_pm_add_addr_c_flag_case. Fixes: 4b1ff850e0c1 ("mptcp: pm: in-kernel: usable client side with C-flag") Cc: stable(a)vger.kernel.org Reviewed-by: Geliang Tang <geliang(a)kernel.org> Signed-off-by: Matthieu Baerts (NGI0) <matttbe(a)kernel.org> Link: https://patch.msgid.link/20251020-net-mptcp-c-flag-late-add-addr-v1-1-82070… Signed-off-by: Jakub Kicinski <kuba(a)kernel.org> diff --git a/net/mptcp/pm_kernel.c b/net/mptcp/pm_kernel.c index e0f44dc232aa..2ae95476dba3 100644 --- a/net/mptcp/pm_kernel.c +++ b/net/mptcp/pm_kernel.c @@ -370,6 +370,10 @@ static void mptcp_pm_create_subflow_or_signal_addr(struct mptcp_sock *msk) } subflow: + /* No need to try establishing subflows to remote id0 if not allowed */ + if (mptcp_pm_add_addr_c_flag_case(msk)) + goto exit; + /* check if should create a new subflow */ while (msk->pm.local_addr_used < endp_subflow_max && msk->pm.extra_subflows < limit_extra_subflows) { @@ -401,6 +405,8 @@ static void mptcp_pm_create_subflow_or_signal_addr(struct mptcp_sock *msk) __mptcp_subflow_connect(sk, &local, &addrs[i]); spin_lock_bh(&msk->pm.lock); } + +exit: mptcp_pm_nl_check_work_pending(msk); }

1 month

3
2
0 0

[PATCH v2 0/9] dt-bindings: PCI: qcom: Add missing required power-domains and resets

by Krzysztof Kozlowski

Changes in v2: - Add also resets - Drop cc-stable tag in the last patch - Link to v1: https://patch.msgid.link/20251029-dt-bindings-pci-qcom-fixes-power-domains-… Recent binding changes forgot to make power-domains and resets required. I am not updating SC8180xp because it will be fixed other way in my next patchset. Best regards, Krzysztof --- Krzysztof Kozlowski (9): dt-bindings: PCI: qcom,pcie-sa8775p: Add missing required power-domains and resets dt-bindings: PCI: qcom,pcie-sc7280: Add missing required power-domains and resets dt-bindings: PCI: qcom,pcie-sc8280xp: Add missing required power-domains and resets dt-bindings: PCI: qcom,pcie-sm8150: Add missing required power-domains and resets dt-bindings: PCI: qcom,pcie-sm8250: Add missing required power-domains and resets dt-bindings: PCI: qcom,pcie-sm8350: Add missing required power-domains and resets dt-bindings: PCI: qcom,pcie-sm8450: Add missing required power-domains and resets dt-bindings: PCI: qcom,pcie-sm8550: Add missing required power-domains and resets dt-bindings: PCI: qcom,pcie-x1e80100: Add missing required power-domains and resets Documentation/devicetree/bindings/pci/qcom,pcie-sa8775p.yaml | 3 +++ Documentation/devicetree/bindings/pci/qcom,pcie-sc7280.yaml | 5 +++++ Documentation/devicetree/bindings/pci/qcom,pcie-sc8280xp.yaml | 3 +++ Documentation/devicetree/bindings/pci/qcom,pcie-sm8150.yaml | 5 +++++ Documentation/devicetree/bindings/pci/qcom,pcie-sm8250.yaml | 5 +++++ Documentation/devicetree/bindings/pci/qcom,pcie-sm8350.yaml | 5 +++++ Documentation/devicetree/bindings/pci/qcom,pcie-sm8450.yaml | 5 +++++ Documentation/devicetree/bindings/pci/qcom,pcie-sm8550.yaml | 5 +++++ Documentation/devicetree/bindings/pci/qcom,pcie-x1e80100.yaml | 5 +++++ 9 files changed, 41 insertions(+) --- base-commit: 326bbf6e2b1ce8d1e6166cce2ca414aa241c382f change-id: 20251029-dt-bindings-pci-qcom-fixes-power-domains-36a669b2e252 Best regards, -- Krzysztof Kozlowski <krzysztof.kozlowski(a)linaro.org>

1 month

4
10
0 0

[PATCH] media: az6007: validate I2C message length

by Nalivayko Sergey

syzbot reports a UBSAN issue as below: UBSAN: array-index-out-of-bounds in drivers/media/usb/dvb-usb-v2/az6007.c:821:30 index 4096 is out of range for type 'unsigned char [4096]' CPU: 1 UID: 0 PID: 5832 Comm: syz-executor328 Not tainted 6.15.0-rc2-syzkaller-00493-gac71fabf1567 #0 PREEMPT(full) Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 02/12/2025 Call Trace: <TASK> __dump_stack lib/dump_stack.c:94 [inline] dump_stack_lvl+0x16c/0x1f0 lib/dump_stack.c:120 ubsan_epilogue lib/ubsan.c:231 [inline] __ubsan_handle_out_of_bounds+0x11c/0x160 lib/ubsan.c:453 az6007_i2c_xfer+0x549/0xc30 drivers/media/usb/dvb-usb-v2/az6007.c:821 __i2c_transfer+0x6b3/0x2190 drivers/i2c/i2c-core-base.c:2259 i2c_transfer drivers/i2c/i2c-core-base.c:2315 [inline] i2c_transfer+0x1da/0x380 drivers/i2c/i2c-core-base.c:2291 i2c_transfer_buffer_flags+0x10c/0x190 drivers/i2c/i2c-core-base.c:2343 i2c_master_recv include/linux/i2c.h:79 [inline] i2cdev_read+0x111/0x280 drivers/i2c/i2c-dev.c:155 do_loop_readv_writev fs/read_write.c:845 [inline] do_loop_readv_writev fs/read_write.c:833 [inline] vfs_readv+0x6bc/0x8a0 fs/read_write.c:1018 do_preadv+0x1af/0x270 fs/read_write.c:1130 do_syscall_x64 arch/x86/entry/syscall_64.c:63 [inline] do_syscall_64+0xcd/0x260 arch/x86/entry/syscall_64.c:94 entry_SYSCALL_64_after_hwframe+0x77/0x7f </TASK> The issue occurs because the az6007 driver does not validate the length of the received I2C message. While iterating over st->data, the index 'j' may exceed the maximum buffer size of 4096 elements. Add validation of msgs.len based on buffer length value passed to __az6007_read/write functions to prevent out-of-bounds access. Reported-by: syzbot+0192952caa411a3be209(a)syzkaller.appspotmail.com Closes: https://syzkaller.appspot.com/bug?extid=d8913f1760bc090ee46e\ Fixes: 71d676345698 ("[media] dvb: Add a new driver for az6007") Cc: stable(a)vger.kernel.org Signed-off-by: Nalivayko Sergey <Sergey.Nalivayko(a)kaspersky.com> --- drivers/media/usb/dvb-usb-v2/az6007.c | 8 ++++++-- 1 file changed, 6 insertions(+), 2 deletions(-) diff --git a/drivers/media/usb/dvb-usb-v2/az6007.c b/drivers/media/usb/dvb-usb-v2/az6007.c index 65ef045b74ca..c966de4ea6e1 100644 --- a/drivers/media/usb/dvb-usb-v2/az6007.c +++ b/drivers/media/usb/dvb-usb-v2/az6007.c @@ -770,6 +770,10 @@ static int az6007_i2c_xfer(struct i2c_adapter *adap, struct i2c_msg msgs[], if (az6007_xfer_debug) printk(KERN_DEBUG "az6007: I2C W/R addr=0x%x len=%d/%d\n", addr, msgs[i].len, msgs[i + 1].len); + if (msgs[i + 1].len + 6 > ARRAY_SIZE(st->data)) { + ret = -EIO; + goto err; + } req = AZ6007_I2C_RD; index = msgs[i].buf[0]; value = addr | (1 << 8); @@ -788,7 +792,7 @@ static int az6007_i2c_xfer(struct i2c_adapter *adap, struct i2c_msg msgs[], if (az6007_xfer_debug) printk(KERN_DEBUG "az6007: I2C W addr=0x%x len=%d\n", addr, msgs[i].len); - if (msgs[i].len < 1) { + if (msgs[i].len < 1 || msgs[i].len - 1 > ARRAY_SIZE(st->data)) { ret = -EIO; goto err; } @@ -806,7 +810,7 @@ static int az6007_i2c_xfer(struct i2c_adapter *adap, struct i2c_msg msgs[], if (az6007_xfer_debug) printk(KERN_DEBUG "az6007: I2C R addr=0x%x len=%d\n", addr, msgs[i].len); - if (msgs[i].len < 1) { + if (msgs[i].len < 1 || msgs[i].len + 6 > ARRAY_SIZE(st->data)) { ret = -EIO; goto err; } -- 2.39.5

1 month

1
0
0 0

[PATCH 5.10] ASoC: SOF: Intel: hda: Fix potential buffer overflow by snprintf()

by Alexandra Diupina

From: Takashi Iwai <tiwai(a)suse.de> commit 94c1ceb043c1a002de9649bb630c8e8347645982 upstream. snprintf() returns the would-be-filled size when the string overflows the given buffer size, hence using this value may result in the buffer overflow (although it's unrealistic). This patch replaces with a safer version, scnprintf() for papering over such a potential issue. Fixes: 29c8e4398f02 ("ASoC: SOF: Intel: hda: add extended rom status dump to error log") Signed-off-by: Takashi Iwai <tiwai(a)suse.de> Link: https://lore.kernel.org/r/20220801165420.25978-4-tiwai@suse.de Signed-off-by: Mark Brown <broonie(a)kernel.org> Signed-off-by: Alexandra Diupina <adiupina(a)astralinux.ru> --- Backport fix for CVE-2022-50050 sound/soc/sof/intel/hda.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/sound/soc/sof/intel/hda.c b/sound/soc/sof/intel/hda.c index b4cc72483137..1d879c2b81e1 100644 --- a/sound/soc/sof/intel/hda.c +++ b/sound/soc/sof/intel/hda.c @@ -437,7 +437,7 @@ static void hda_dsp_dump_ext_rom_status(struct snd_sof_dev *sdev) for (i = 0; i < HDA_EXT_ROM_STATUS_SIZE; i++) { value = snd_sof_dsp_read(sdev, HDA_DSP_BAR, HDA_DSP_SRAM_REG_ROM_STATUS + i * 0x4); - len += snprintf(msg + len, sizeof(msg) - len, " 0x%x", value); + len += scnprintf(msg + len, sizeof(msg) - len, " 0x%x", value); } sof_dev_dbg_or_err(sdev->dev, hda->boot_iteration == HDA_FW_BOOT_ATTEMPTS, -- 2.30.2

1 month

1
0
0 0

[REGRESSION] Bluetooth adapter provided by `btusb` not recognized since v6.13.2

by incogcyberpunk＠proton.me

#regzbot introduced: v6.13.1..v6.13.2 Distro: Arch Linux Kernel: since v6.13.2 The bluetooth adapter would be recognized and the bluetooth worked flawlessly till v6.13.1 , but since the v6.13.2 , the bluetooth adapter doesn't get recognized by the bluetooth service and therefore the bluetooth functionality doesn't work . I suspect the bluetooth's driver failing to load at the kernel-level. - The output of bluetoothctl : $: bluetoothctl Agent registered [bluetoothctl]> list [bluetoothctl]> devices No default controller available [bluetoothctl]> - The output of systemctl status bluetooth.service : ● bluetooth.service - Bluetooth service Loaded: loaded (/usr/lib/systemd/system/bluetooth.service; enabled; preset: disabled) Active: active (running) since Sat 2025-11-15 22:57:00 +0545; 1 day 8h ago Invocation: bddf190655fd4a4290d41cde594f2efa Docs: man:bluetoothd(8) Main PID: 617 (bluetoothd) Status: "Running" Tasks: 1 (limit: 18701) Memory: 2.8M (peak: 3.8M) CPU: 38ms CGroup: /system.slice/bluetooth.service └─617 /usr/lib/bluetooth/bluetoothd Nov 15 22:57:00 Incog systemd[1]: Starting Bluetooth service... Nov 15 22:57:00 Incog bluetoothd[617]: Bluetooth daemon 5.84 Nov 15 22:57:00 Incog systemd[1]: Started Bluetooth service. Nov 15 22:57:00 Incog bluetoothd[617]: Starting SDP server Nov 15 22:57:00 Incog bluetoothd[617]: Bluetooth management interface 1.23 initialized - The output of lspci is attached below . - The logs for journalctl -b for both v6.13.1 and v6.13.2 are attached below. Regards, IncogCyberpunk

1 month

2
2
0 0

[PATCH] mtd: mtdpart: ignore error -ENOENT from parsers on subpartitions

by Christian Marangi

Commit 5c2f7727d437 ("mtd: mtdpart: check for subpartitions parsing result") introduced some kind of regression with parser on subpartitions where if a parser emits an error then the entire parsing process from the upper parser fails and partitions are deleted. Not checking for error in subpartitions was originally intended as special parser can emit error also in the case of the partition not correctly init (for example a wiped partition) or special case where the partition should be skipped due to some ENV variables externally provided (from bootloader for example) One example case is the TRX partition where, in the context of a wiped partition, returns a -ENOENT as the trx_magic is not found in the expected TRX header (as the partition is wiped) To better handle this and still keep some kind of error tracking (for example to catch -ENOMEM errors or -EINVAL errors), permit parser on subpartition to emit -ENOENT error, print a debug log and skip them accordingly. This results in giving better tracking of the status of the parser (instead of returning just 0, dropping any kind of signal that there is something wrong with the parser) and to some degree restore the original logic of the subpartitions parse. (worth to notice that some special partition might have all the special header present for the parser and declare 0 partition in it, this is why it would be wrong to simply return 0 in the case of a special partition that is NOT init for the scanning parser) Cc: stable(a)vger.kernel.org Fixes: 5c2f7727d437 ("mtd: mtdpart: check for subpartitions parsing result") Signed-off-by: Christian Marangi <ansuelsmth(a)gmail.com> --- drivers/mtd/mtdpart.c | 7 +++++-- 1 file changed, 5 insertions(+), 2 deletions(-) diff --git a/drivers/mtd/mtdpart.c b/drivers/mtd/mtdpart.c index 994e8c51e674..2876501a7814 100644 --- a/drivers/mtd/mtdpart.c +++ b/drivers/mtd/mtdpart.c @@ -425,9 +425,12 @@ int add_mtd_partitions(struct mtd_info *parent, mtd_add_partition_attrs(child); - /* Look for subpartitions */ + /* Look for subpartitions (skip if no maching parser found) */ ret = parse_mtd_partitions(child, parts[i].types, NULL); - if (ret < 0) { + if (ret < 0 && ret == -ENOENT) { + pr_debug("Skip parsing subpartitions: %d\n", ret); + continue; + } else if (ret < 0) { pr_err("Failed to parse subpartitions: %d\n", ret); goto err_del_partitions; } -- 2.51.0

1 month

2
4
0 0

[PATCH] can: rcar_canfd: Fix controller mode setting for RZ/G2L SoCs

by Biju

From: Biju Das <biju.das.jz(a)bp.renesas.com> The commit 5cff263606a1 ("can: rcar_canfd: Fix controller mode setting") applies to all SoCs except the RZ/G2L family of SoCs. As per RZ/G2L hardware manual "Figure 28.16 CAN Setting Procedure after the MCU is Reset" CAN mode needs to be set before channel reset. Add the mode_before_ch_rst variable to struct rcar_canfd_hw_info to handle this difference. The above commit also breaks CANFD functionality on RZ/G3E. Adapt this change to RZ/G3E, as well as it works ok by following the initialisation sequence of RZ/G2L. Fixes: 5cff263606a1 ("can: rcar_canfd: Fix controller mode setting") Cc: stable(a)vger.kernel.org Signed-off-by: Biju Das <biju.das.jz(a)bp.renesas.com> --- drivers/net/can/rcar/rcar_canfd.c | 12 +++++++++++- 1 file changed, 11 insertions(+), 1 deletion(-) diff --git a/drivers/net/can/rcar/rcar_canfd.c b/drivers/net/can/rcar/rcar_canfd.c index 49ab65274b51..1724fa5dace6 100644 --- a/drivers/net/can/rcar/rcar_canfd.c +++ b/drivers/net/can/rcar/rcar_canfd.c @@ -444,6 +444,7 @@ struct rcar_canfd_hw_info { unsigned ch_interface_mode:1; /* Has channel interface mode */ unsigned shared_can_regs:1; /* Has shared classical can registers */ unsigned external_clk:1; /* Has external clock */ + unsigned mode_before_ch_rst:1; /* Has set mode before channel reset */ }; /* Channel priv data */ @@ -615,6 +616,7 @@ static const struct rcar_canfd_hw_info rcar_gen3_hw_info = { .ch_interface_mode = 0, .shared_can_regs = 0, .external_clk = 1, + .mode_before_ch_rst = 0, }; static const struct rcar_canfd_hw_info rcar_gen4_hw_info = { @@ -632,6 +634,7 @@ static const struct rcar_canfd_hw_info rcar_gen4_hw_info = { .ch_interface_mode = 1, .shared_can_regs = 1, .external_clk = 1, + .mode_before_ch_rst = 0, }; static const struct rcar_canfd_hw_info rzg2l_hw_info = { @@ -649,6 +652,7 @@ static const struct rcar_canfd_hw_info rzg2l_hw_info = { .ch_interface_mode = 0, .shared_can_regs = 0, .external_clk = 1, + .mode_before_ch_rst = 1, }; static const struct rcar_canfd_hw_info r9a09g047_hw_info = { @@ -666,6 +670,7 @@ static const struct rcar_canfd_hw_info r9a09g047_hw_info = { .ch_interface_mode = 1, .shared_can_regs = 1, .external_clk = 0, + .mode_before_ch_rst = 1, }; /* Helper functions */ @@ -806,6 +811,10 @@ static int rcar_canfd_reset_controller(struct rcar_canfd_global *gpriv) /* Reset Global error flags */ rcar_canfd_write(gpriv->base, RCANFD_GERFL, 0x0); + /* RZ/G2L SoC needs setting the mode before channel reset */ + if (gpriv->info->mode_before_ch_rst) + rcar_canfd_set_mode(gpriv); + /* Transition all Channels to reset mode */ for_each_set_bit(ch, &gpriv->channels_mask, gpriv->info->max_channels) { rcar_canfd_clear_bit(gpriv->base, @@ -826,7 +835,8 @@ static int rcar_canfd_reset_controller(struct rcar_canfd_global *gpriv) } /* Set the controller into appropriate mode */ - rcar_canfd_set_mode(gpriv); + if (!gpriv->info->mode_before_ch_rst) + rcar_canfd_set_mode(gpriv); return 0; } -- 2.43.0

1 month

4
6
0 0

[PATCH] PCI: cadence: Kconfig: change PCIE_CADENCE configs from tristate to bool

by Siddharth Vadapalli

The drivers associated with the PCIE_CADENCE, PCIE_CADENCE_HOST AND PCIE_CADENCE_EP configs are used by multiple vendor drivers and serve as a library of helpers. Since the vendor drivers could individually be built as built-in or as loadable modules, it is possible to select a build configuration wherein a vendor driver is built-in while the library is built as a loadable module. This will result in a build error as reported in the 'Closes' link below. Address the build error by changing the library configs to be 'bool' instead of 'tristate'. Reported-by: kernel test robot <lkp(a)intel.com> Closes: https://lore.kernel.org/oe-kbuild-all/202511111705.MZ7ls8Hm-lkp@intel.com/ Fixes: 1c72774df028 ("PCI: sg2042: Add Sophgo SG2042 PCIe driver") Cc: <stable(a)vger.kernel.org> Signed-off-by: Siddharth Vadapalli <s-vadapalli(a)ti.com> --- drivers/pci/controller/cadence/Kconfig | 6 +++--- 1 file changed, 3 insertions(+), 3 deletions(-) diff --git a/drivers/pci/controller/cadence/Kconfig b/drivers/pci/controller/cadence/Kconfig index 02a639e55fd8..980da64ce730 100644 --- a/drivers/pci/controller/cadence/Kconfig +++ b/drivers/pci/controller/cadence/Kconfig @@ -4,16 +4,16 @@ menu "Cadence-based PCIe controllers" depends on PCI config PCIE_CADENCE - tristate + bool config PCIE_CADENCE_HOST - tristate + bool depends on OF select IRQ_DOMAIN select PCIE_CADENCE config PCIE_CADENCE_EP - tristate + bool depends on OF depends on PCI_ENDPOINT select PCIE_CADENCE -- 2.51.1

1 month

4
11
0 0

[PATCH 6.12.y] mm, percpu: do not consider sleepable allocations atomic

by mambaxin＠163.com

From: Michal Hocko <mhocko(a)suse.com> [ Upstream commit 9a5b183941b52f84c0f9e5f27ce44e99318c9e0f ] 28307d938fb2 ("percpu: make pcpu_alloc() aware of current gfp context") has fixed a reclaim recursion for scoped GFP_NOFS context. It has done that by avoiding taking pcpu_alloc_mutex. This is a correct solution as the worker context with full GFP_KERNEL allocation/reclaim power and which is using the same lock cannot block the NOFS pcpu_alloc caller. On the other hand this is a very conservative approach that could lead to failures because pcpu_alloc lockless implementation is quite limited. We have a bug report about premature failures when scsi array of 193 devices is scanned. Sometimes (not consistently) the scanning aborts because the iscsid daemon fails to create the queue for a random scsi device during the scan. iscsid itself is running with PR_SET_IO_FLUSHER set so all allocations from this process context are GFP_NOIO. This in turn makes any pcpu_alloc lockless (without pcpu_alloc_mutex) which leads to pre-mature failures. It has turned out that iscsid has worked around this by dropping PR_SET_IO_FLUSHER (https://github.com/open-iscsi/open-iscsi/pull/382) when scanning host. But we can do better in this case on the kernel side and use pcpu_alloc_mutex for NOIO resp. NOFS constrained allocation scopes too. We just need the WQ worker to never trigger IO/FS reclaim. Achieve that by enforcing scoped GFP_NOIO for the whole execution of pcpu_balance_workfn (this will imply NOFS constrain as well). This will remove the dependency chain and preserve the full allocation power of the pcpu_alloc call. While at it make is_atomic really test for blockable allocations. Link: https://lkml.kernel.org/r/20250206122633.167896-1-mhocko@kernel.org Fixes: 28307d938fb2 ("percpu: make pcpu_alloc() aware of current gfp context") Signed-off-by: Michal Hocko <mhocko(a)suse.com> Acked-by: Vlastimil Babka <vbabka(a)suse.cz> Cc: Dennis Zhou <dennis(a)kernel.org> Cc: Filipe David Manana <fdmanana(a)suse.com> Cc: Tejun Heo <tj(a)kernel.org> Signed-off-by: Andrew Morton <akpm(a)linux-foundation.org> Signed-off-by: chenxin <chenxinxin(a)xiaomi.com> --- mm/percpu.c | 8 +++++++- 1 file changed, 7 insertions(+), 1 deletion(-) diff --git a/mm/percpu.c b/mm/percpu.c index fb0307723da6..44764720b6d8 100644 --- a/mm/percpu.c +++ b/mm/percpu.c @@ -1758,7 +1758,7 @@ void __percpu *pcpu_alloc_noprof(size_t size, size_t align, bool reserved, gfp = current_gfp_context(gfp); /* whitelisted flags that can be passed to the backing allocators */ pcpu_gfp = gfp & (GFP_KERNEL | __GFP_NORETRY | __GFP_NOWARN); - is_atomic = (gfp & GFP_KERNEL) != GFP_KERNEL; + is_atomic = !gfpflags_allow_blocking(gfp); do_warn = !(gfp & __GFP_NOWARN); /* @@ -2203,7 +2203,12 @@ static void pcpu_balance_workfn(struct work_struct *work) * to grow other chunks. This then gives pcpu_reclaim_populated() time * to move fully free chunks to the active list to be freed if * appropriate. + * + * Enforce GFP_NOIO allocations because we have pcpu_alloc users + * constrained to GFP_NOIO/NOFS contexts and they could form lock + * dependency through pcpu_alloc_mutex */ + unsigned int flags = memalloc_noio_save(); mutex_lock(&pcpu_alloc_mutex); spin_lock_irq(&pcpu_lock); @@ -2214,6 +2219,7 @@ static void pcpu_balance_workfn(struct work_struct *work) spin_unlock_irq(&pcpu_lock); mutex_unlock(&pcpu_alloc_mutex); + memalloc_noio_restore(flags); } /** -- 2.50.1

1 month

1
0
0 0

2025

2024

2023

2022

2021

2020

2019

2018

2017

Linux-stable-mirror November 2025