November 2025 - Linux-stable-mirror

[PATCH v3 0/3] phy: qcom: edp: Add missing ref clock to x1e80100

by Abel Vesa

According to documentation, the DP PHY on x1e80100 has another clock called ref. The current X Elite devices supported upstream work fine without this clock, because the boot firmware leaves this clock enabled. But we should not rely on that. Also, when it comes to power management, this clock needs to be also disabled on suspend. So even though this change breaks the ABI, it is needed in order to make we disable this clock on runtime PM, when that is going to be enabled in the driver. So rework the driver to allow different number of clocks, fix the dt-bindings schema and add the clock to the DT node as well. Signed-off-by: Abel Vesa <abel.vesa(a)linaro.org> --- Changes in v3: - Use dev_err_probe() on clocks parsing failure. - Explain why the ABI break is necessary. - Drop the extra 'clk' suffix from the clock name. So ref instead of refclk. - Link to v2: https://lore.kernel.org/r/20250903-phy-qcom-edp-add-missing-refclk-v2-0-d88… Changes in v2: - Fix schema by adding the minItems, as suggested by Krzysztof. - Use devm_clk_bulk_get_all, as suggested by Konrad. - Rephrase the commit messages to reflect the flexible number of clocks. - Link to v1: https://lore.kernel.org/r/20250730-phy-qcom-edp-add-missing-refclk-v1-0-6f7… --- Abel Vesa (3): dt-bindings: phy: qcom-edp: Add missing clock for X Elite phy: qcom: edp: Make the number of clocks flexible arm64: dts: qcom: Add missing TCSR ref clock to the DP PHYs .../devicetree/bindings/phy/qcom,edp-phy.yaml | 28 +++++++++++++++++++++- arch/arm64/boot/dts/qcom/x1e80100.dtsi | 12 ++++++---- drivers/phy/qualcomm/phy-qcom-edp.c | 16 ++++++------- 3 files changed, 43 insertions(+), 13 deletions(-) --- base-commit: 65dd046ef55861190ecde44c6d9fcde54b9fb77d change-id: 20250730-phy-qcom-edp-add-missing-refclk-5ab82828f8e7 Best regards, -- Abel Vesa <abel.vesa(a)linaro.org>

1 month

6
11
0 0

[PATCH] be2net: Use the wrb_params instead the NULL pointer

by Ваторопин Андрей

From: Andrey Vatoropin <a.vatoropin(a)crpt.ru> be_insert_vlan_in_pkt() is called with the wrb_params argument being NULL at be_send_pkt_to_bmc() call site. This may lead to dereferencing a NULL pointer when processing a workaround for specific packet, as commit bc0c3405abbb ("be2net: fix a Tx stall bug caused by a specific ipv6 packet") states. The correct way would be to pass the wrb_params from be_xmit(). Found by Linux Verification Center (linuxtesting.org) with SVACE. Fixes: 760c295e0e8d ("be2net: Support for OS2BMC."). Cc: stable(a)vger.kernel.org Signed-off-by: Andrey Vatoropin <a.vatoropin(a)crpt.ru> --- drivers/net/ethernet/emulex/benet/be_main.c | 6 +++--- 1 file changed, 3 insertions(+), 3 deletions(-) diff --git a/drivers/net/ethernet/emulex/benet/be_main.c b/drivers/net/ethernet/emulex/benet/be_main.c index cb004fd16252..631045590d40 100644 --- a/drivers/net/ethernet/emulex/benet/be_main.c +++ b/drivers/net/ethernet/emulex/benet/be_main.c @@ -1296,7 +1296,7 @@ static void be_xmit_flush(struct be_adapter *adapter, struct be_tx_obj *txo) (adapter->bmc_filt_mask & BMC_FILT_MULTICAST) static bool be_send_pkt_to_bmc(struct be_adapter *adapter, - struct sk_buff **skb) + struct sk_buff **skb, struct be_wrb_params *wrb_params) { struct ethhdr *eh = (struct ethhdr *)(*skb)->data; bool os2bmc = false; @@ -1360,7 +1360,7 @@ static bool be_send_pkt_to_bmc(struct be_adapter *adapter, * to BMC, asic expects the vlan to be inline in the packet. */ if (os2bmc) - *skb = be_insert_vlan_in_pkt(adapter, *skb, NULL); + *skb = be_insert_vlan_in_pkt(adapter, *skb, wrb_params); return os2bmc; } @@ -1387,7 +1387,7 @@ static netdev_tx_t be_xmit(struct sk_buff *skb, struct net_device *netdev) /* if os2bmc is enabled and if the pkt is destined to bmc, * enqueue the pkt a 2nd time with mgmt bit set. */ - if (be_send_pkt_to_bmc(adapter, &skb)) { + if (be_send_pkt_to_bmc(adapter, &skb, &wrb_params)) { BE_WRB_F_SET(wrb_params.features, OS2BMC, 1); wrb_cnt = be_xmit_enqueue(adapter, txo, skb, &wrb_params); if (unlikely(!wrb_cnt)) -- 2.43.0

1 month

1
0
0 0

[PATCH] arm64: dts: intel: agilex5: Add fallback compatible for XGMAC

by MUHAMMAD AMIRUL ASYRAF MOHAMAD JAMIAN

From: muhamm120 <muhammad.amirul.asyraf.mohamad.jamian(a)intel.com> Add "snps,dwxgmac" as fallback compatible string to all three gmac nodes (gmac0, gmac1, gmac2) in Agilex5 DTSI. With the fallback present, the generic dwmac driver can properly initialize the XGMAC2 hardware, allowing ethernet to function correctly. This fixes ethernet regression test failures on Agilex3/Agilex5 SOCDK platforms. Fixes: 343ea11a2fe3 ("arm64: dts: Agilex5 Add gmac nodes to DTSI for Agilex5") Cc: stable(a)vger.kernel.org # 6.18+ Signed-off-by: Muhammad Amirul Asyraf Mohamad Jamian <muhammad.amirul. asyraf.mohamad.jamian(a)altera.com> --- arch/arm64/boot/dts/intel/socfpga_agilex5.dtsi | 9 ++++++--- 1 file changed, 6 insertions(+), 3 deletions(-) diff --git a/arch/arm64/boot/dts/intel/socfpga_agilex5.dtsi b/arch/arm64/boot/dts/intel/socfpga_agilex5.dtsi index a5c2025a616e..942773e96d02 100644 --- a/arch/arm64/boot/dts/intel/socfpga_agilex5.dtsi +++ b/arch/arm64/boot/dts/intel/socfpga_agilex5.dtsi @@ -544,7 +544,8 @@ qspi: spi@108d2000 { gmac0: ethernet@10810000 { compatible = "altr,socfpga-stmmac-agilex5", - "snps,dwxgmac-2.10"; + "snps,dwxgmac-2.10", + "snps,dwxgmac"; reg = <0x10810000 0x3500>; interrupts = <GIC_SPI 190 IRQ_TYPE_LEVEL_HIGH>; interrupt-names = "macirq"; @@ -656,7 +657,8 @@ queue7 { gmac1: ethernet@10820000 { compatible = "altr,socfpga-stmmac-agilex5", - "snps,dwxgmac-2.10"; + "snps,dwxgmac-2.10", + "snps,dwxgmac"; reg = <0x10820000 0x3500>; interrupts = <GIC_SPI 207 IRQ_TYPE_LEVEL_HIGH>; interrupt-names = "macirq"; @@ -768,7 +770,8 @@ queue7 { gmac2: ethernet@10830000 { compatible = "altr,socfpga-stmmac-agilex5", - "snps,dwxgmac-2.10"; + "snps,dwxgmac-2.10", + "snps,dwxgmac"; reg = <0x10830000 0x3500>; interrupts = <GIC_SPI 224 IRQ_TYPE_LEVEL_HIGH>; interrupt-names = "macirq"; -- 2.43.7

1 month

2
1
0 0

[PATCH] drm/mediatek: Fix device node reference leak in mtk_dp_dt_parse()

by Miaoqian Lin

The function mtk_dp_dt_parse() calls of_graph_get_endpoint_by_regs() to get the endpoint device node, but fails to call of_node_put() to release the reference when the function returns. This results in a device node reference leak. Fix this by adding the missing of_node_put() call before returning from the function. Found via static analysis and code review. Fixes: f70ac097a2cf ("drm/mediatek: Add MT8195 Embedded DisplayPort driver") Cc: stable(a)vger.kernel.org Signed-off-by: Miaoqian Lin <linmq006(a)gmail.com> --- drivers/gpu/drm/mediatek/mtk_dp.c | 1 + 1 file changed, 1 insertion(+) diff --git a/drivers/gpu/drm/mediatek/mtk_dp.c b/drivers/gpu/drm/mediatek/mtk_dp.c index bef6eeb30d3e..b0b1e158600f 100644 --- a/drivers/gpu/drm/mediatek/mtk_dp.c +++ b/drivers/gpu/drm/mediatek/mtk_dp.c @@ -2087,6 +2087,7 @@ static int mtk_dp_dt_parse(struct mtk_dp *mtk_dp, endpoint = of_graph_get_endpoint_by_regs(pdev->dev.of_node, 1, -1); len = of_property_count_elems_of_size(endpoint, "data-lanes", sizeof(u32)); + of_node_put(endpoint); if (len < 0 || len > 4 || len == 3) { dev_err(dev, "invalid data lane size: %d\n", len); return -EINVAL; -- 2.39.5 (Apple Git-154)

1 month

3
2
0 0

[PATCH] arm64: dts: intel: agilex5: Add fallback compatible for XGMAC

by muhamm120

Add "snps,dwxgmac" as fallback compatible string to all three gmac nodes (gmac0, gmac1, gmac2) in Agilex5 DTSI. With the fallback present, the generic dwmac driver can properly initialize the XGMAC2 hardware, allowing ethernet to function correctly. This fixes ethernet regression test failures on Agilex3/Agilex5 SOCDK platforms. Fixes: 343ea11a2fe3 ("arm64: dts: Agilex5 Add gmac nodes to DTSI for Agilex5") Cc: stable(a)vger.kernel.org # 6.18+ Signed-off-by: Muhammad Amirul Asyraf Mohamad Jamian <muhammad.amirul. asyraf.mohamad.jamian(a)intel.com> --- arch/arm64/boot/dts/intel/socfpga_agilex5.dtsi | 9 ++++++--- 1 file changed, 6 insertions(+), 3 deletions(-) diff --git a/arch/arm64/boot/dts/intel/socfpga_agilex5.dtsi b/arch/arm64/boot/dts/intel/socfpga_agilex5.dtsi index a5c2025a616e..942773e96d02 100644 --- a/arch/arm64/boot/dts/intel/socfpga_agilex5.dtsi +++ b/arch/arm64/boot/dts/intel/socfpga_agilex5.dtsi @@ -544,7 +544,8 @@ qspi: spi@108d2000 { gmac0: ethernet@10810000 { compatible = "altr,socfpga-stmmac-agilex5", - "snps,dwxgmac-2.10"; + "snps,dwxgmac-2.10", + "snps,dwxgmac"; reg = <0x10810000 0x3500>; interrupts = <GIC_SPI 190 IRQ_TYPE_LEVEL_HIGH>; interrupt-names = "macirq"; @@ -656,7 +657,8 @@ queue7 { gmac1: ethernet@10820000 { compatible = "altr,socfpga-stmmac-agilex5", - "snps,dwxgmac-2.10"; + "snps,dwxgmac-2.10", + "snps,dwxgmac"; reg = <0x10820000 0x3500>; interrupts = <GIC_SPI 207 IRQ_TYPE_LEVEL_HIGH>; interrupt-names = "macirq"; @@ -768,7 +770,8 @@ queue7 { gmac2: ethernet@10830000 { compatible = "altr,socfpga-stmmac-agilex5", - "snps,dwxgmac-2.10"; + "snps,dwxgmac-2.10", + "snps,dwxgmac"; reg = <0x10830000 0x3500>; interrupts = <GIC_SPI 224 IRQ_TYPE_LEVEL_HIGH>; interrupt-names = "macirq"; -- 2.43.7

1 month

1
0
0 0

[PATCH net] vhost: rewind next_avail_head while discarding descriptors

by Jason Wang

When discarding descriptors with IN_ORDER, we should rewind next_avail_head otherwise it would run out of sync with last_avail_idx. This would cause driver to report "id X is not a head". Fixing this by returning the number of descriptors that is used for each buffer via vhost_get_vq_desc_n() so caller can use the value while discarding descriptors. Fixes: 67a873df0c41 ("vhost: basic in order support") Cc: stable(a)vger.kernel.org Signed-off-by: Jason Wang <jasowang(a)redhat.com> --- drivers/vhost/net.c | 53 ++++++++++++++++++++++++++----------------- drivers/vhost/vhost.c | 43 ++++++++++++++++++++++++----------- drivers/vhost/vhost.h | 9 +++++++- 3 files changed, 70 insertions(+), 35 deletions(-) diff --git a/drivers/vhost/net.c b/drivers/vhost/net.c index 35ded4330431..8f7f50acb6d6 100644 --- a/drivers/vhost/net.c +++ b/drivers/vhost/net.c @@ -592,14 +592,15 @@ static void vhost_net_busy_poll(struct vhost_net *net, static int vhost_net_tx_get_vq_desc(struct vhost_net *net, struct vhost_net_virtqueue *tnvq, unsigned int *out_num, unsigned int *in_num, - struct msghdr *msghdr, bool *busyloop_intr) + struct msghdr *msghdr, bool *busyloop_intr, + unsigned int *ndesc) { struct vhost_net_virtqueue *rnvq = &net->vqs[VHOST_NET_VQ_RX]; struct vhost_virtqueue *rvq = &rnvq->vq; struct vhost_virtqueue *tvq = &tnvq->vq; - int r = vhost_get_vq_desc(tvq, tvq->iov, ARRAY_SIZE(tvq->iov), - out_num, in_num, NULL, NULL); + int r = vhost_get_vq_desc_n(tvq, tvq->iov, ARRAY_SIZE(tvq->iov), + out_num, in_num, NULL, NULL, ndesc); if (r == tvq->num && tvq->busyloop_timeout) { /* Flush batched packets first */ @@ -610,8 +611,8 @@ static int vhost_net_tx_get_vq_desc(struct vhost_net *net, vhost_net_busy_poll(net, rvq, tvq, busyloop_intr, false); - r = vhost_get_vq_desc(tvq, tvq->iov, ARRAY_SIZE(tvq->iov), - out_num, in_num, NULL, NULL); + r = vhost_get_vq_desc_n(tvq, tvq->iov, ARRAY_SIZE(tvq->iov), + out_num, in_num, NULL, NULL, ndesc); } return r; @@ -642,12 +643,14 @@ static int get_tx_bufs(struct vhost_net *net, struct vhost_net_virtqueue *nvq, struct msghdr *msg, unsigned int *out, unsigned int *in, - size_t *len, bool *busyloop_intr) + size_t *len, bool *busyloop_intr, + unsigned int *ndesc) { struct vhost_virtqueue *vq = &nvq->vq; int ret; - ret = vhost_net_tx_get_vq_desc(net, nvq, out, in, msg, busyloop_intr); + ret = vhost_net_tx_get_vq_desc(net, nvq, out, in, msg, + busyloop_intr, ndesc); if (ret < 0 || ret == vq->num) return ret; @@ -766,6 +769,7 @@ static void handle_tx_copy(struct vhost_net *net, struct socket *sock) int sent_pkts = 0; bool sock_can_batch = (sock->sk->sk_sndbuf == INT_MAX); bool in_order = vhost_has_feature(vq, VIRTIO_F_IN_ORDER); + unsigned int ndesc = 0; do { bool busyloop_intr = false; @@ -774,7 +778,7 @@ static void handle_tx_copy(struct vhost_net *net, struct socket *sock) vhost_tx_batch(net, nvq, sock, &msg); head = get_tx_bufs(net, nvq, &msg, &out, &in, &len, - &busyloop_intr); + &busyloop_intr, &ndesc); /* On error, stop handling until the next kick. */ if (unlikely(head < 0)) break; @@ -806,7 +810,7 @@ static void handle_tx_copy(struct vhost_net *net, struct socket *sock) goto done; } else if (unlikely(err != -ENOSPC)) { vhost_tx_batch(net, nvq, sock, &msg); - vhost_discard_vq_desc(vq, 1); + vhost_discard_vq_desc(vq, 1, ndesc); vhost_net_enable_vq(net, vq); break; } @@ -829,7 +833,7 @@ static void handle_tx_copy(struct vhost_net *net, struct socket *sock) err = sock->ops->sendmsg(sock, &msg, len); if (unlikely(err < 0)) { if (err == -EAGAIN || err == -ENOMEM || err == -ENOBUFS) { - vhost_discard_vq_desc(vq, 1); + vhost_discard_vq_desc(vq, 1, ndesc); vhost_net_enable_vq(net, vq); break; } @@ -868,6 +872,7 @@ static void handle_tx_zerocopy(struct vhost_net *net, struct socket *sock) int err; struct vhost_net_ubuf_ref *ubufs; struct ubuf_info_msgzc *ubuf; + unsigned int ndesc = 0; bool zcopy_used; int sent_pkts = 0; @@ -879,7 +884,7 @@ static void handle_tx_zerocopy(struct vhost_net *net, struct socket *sock) busyloop_intr = false; head = get_tx_bufs(net, nvq, &msg, &out, &in, &len, - &busyloop_intr); + &busyloop_intr, &ndesc); /* On error, stop handling until the next kick. */ if (unlikely(head < 0)) break; @@ -941,7 +946,7 @@ static void handle_tx_zerocopy(struct vhost_net *net, struct socket *sock) vq->heads[ubuf->desc].len = VHOST_DMA_DONE_LEN; } if (retry) { - vhost_discard_vq_desc(vq, 1); + vhost_discard_vq_desc(vq, 1, ndesc); vhost_net_enable_vq(net, vq); break; } @@ -1045,11 +1050,12 @@ static int get_rx_bufs(struct vhost_net_virtqueue *nvq, unsigned *iovcount, struct vhost_log *log, unsigned *log_num, - unsigned int quota) + unsigned int quota, + unsigned int *ndesc) { struct vhost_virtqueue *vq = &nvq->vq; bool in_order = vhost_has_feature(vq, VIRTIO_F_IN_ORDER); - unsigned int out, in; + unsigned int out, in, desc_num, n = 0; int seg = 0; int headcount = 0; unsigned d; @@ -1064,9 +1070,9 @@ static int get_rx_bufs(struct vhost_net_virtqueue *nvq, r = -ENOBUFS; goto err; } - r = vhost_get_vq_desc(vq, vq->iov + seg, - ARRAY_SIZE(vq->iov) - seg, &out, - &in, log, log_num); + r = vhost_get_vq_desc_n(vq, vq->iov + seg, + ARRAY_SIZE(vq->iov) - seg, &out, + &in, log, log_num, &desc_num); if (unlikely(r < 0)) goto err; @@ -1093,6 +1099,7 @@ static int get_rx_bufs(struct vhost_net_virtqueue *nvq, ++headcount; datalen -= len; seg += in; + n += desc_num; } *iovcount = seg; @@ -1113,9 +1120,11 @@ static int get_rx_bufs(struct vhost_net_virtqueue *nvq, nheads[0] = headcount; } + *ndesc = n; + return headcount; err: - vhost_discard_vq_desc(vq, headcount); + vhost_discard_vq_desc(vq, headcount, n); return r; } @@ -1151,6 +1160,7 @@ static void handle_rx(struct vhost_net *net) struct iov_iter fixup; __virtio16 num_buffers; int recv_pkts = 0; + unsigned int ndesc; mutex_lock_nested(&vq->mutex, VHOST_NET_VQ_RX); sock = vhost_vq_get_backend(vq); @@ -1182,7 +1192,8 @@ static void handle_rx(struct vhost_net *net) headcount = get_rx_bufs(nvq, vq->heads + count, vq->nheads + count, vhost_len, &in, vq_log, &log, - likely(mergeable) ? UIO_MAXIOV : 1); + likely(mergeable) ? UIO_MAXIOV : 1, + &ndesc); /* On error, stop handling until the next kick. */ if (unlikely(headcount < 0)) goto out; @@ -1228,7 +1239,7 @@ static void handle_rx(struct vhost_net *net) if (unlikely(err != sock_len)) { pr_debug("Discarded rx packet: " " len %d, expected %zd\n", err, sock_len); - vhost_discard_vq_desc(vq, headcount); + vhost_discard_vq_desc(vq, headcount, ndesc); continue; } /* Supply virtio_net_hdr if VHOST_NET_F_VIRTIO_NET_HDR */ @@ -1252,7 +1263,7 @@ static void handle_rx(struct vhost_net *net) copy_to_iter(&num_buffers, sizeof num_buffers, &fixup) != sizeof num_buffers) { vq_err(vq, "Failed num_buffers write"); - vhost_discard_vq_desc(vq, headcount); + vhost_discard_vq_desc(vq, headcount, ndesc); goto out; } nvq->done_idx += headcount; diff --git a/drivers/vhost/vhost.c b/drivers/vhost/vhost.c index 8570fdf2e14a..b56568807588 100644 --- a/drivers/vhost/vhost.c +++ b/drivers/vhost/vhost.c @@ -2792,18 +2792,11 @@ static int get_indirect(struct vhost_virtqueue *vq, return 0; } -/* This looks in the virtqueue and for the first available buffer, and converts - * it to an iovec for convenient access. Since descriptors consist of some - * number of output then some number of input descriptors, it's actually two - * iovecs, but we pack them into one and note how many of each there were. - * - * This function returns the descriptor number found, or vq->num (which is - * never a valid descriptor number) if none was found. A negative code is - * returned on error. */ -int vhost_get_vq_desc(struct vhost_virtqueue *vq, - struct iovec iov[], unsigned int iov_size, - unsigned int *out_num, unsigned int *in_num, - struct vhost_log *log, unsigned int *log_num) +int vhost_get_vq_desc_n(struct vhost_virtqueue *vq, + struct iovec iov[], unsigned int iov_size, + unsigned int *out_num, unsigned int *in_num, + struct vhost_log *log, unsigned int *log_num, + unsigned int *ndesc) { bool in_order = vhost_has_feature(vq, VIRTIO_F_IN_ORDER); struct vring_desc desc; @@ -2921,16 +2914,40 @@ int vhost_get_vq_desc(struct vhost_virtqueue *vq, vq->last_avail_idx++; vq->next_avail_head += c; + if (ndesc) + *ndesc = c; + /* Assume notifications from guest are disabled at this point, * if they aren't we would need to update avail_event index. */ BUG_ON(!(vq->used_flags & VRING_USED_F_NO_NOTIFY)); return head; } +EXPORT_SYMBOL_GPL(vhost_get_vq_desc_n); + +/* This looks in the virtqueue and for the first available buffer, and converts + * it to an iovec for convenient access. Since descriptors consist of some + * number of output then some number of input descriptors, it's actually two + * iovecs, but we pack them into one and note how many of each there were. + * + * This function returns the descriptor number found, or vq->num (which is + * never a valid descriptor number) if none was found. A negative code is + * returned on error. + */ +int vhost_get_vq_desc(struct vhost_virtqueue *vq, + struct iovec iov[], unsigned int iov_size, + unsigned int *out_num, unsigned int *in_num, + struct vhost_log *log, unsigned int *log_num) +{ + return vhost_get_vq_desc_n(vq, iov, iov_size, out_num, in_num, + log, log_num, NULL); +} EXPORT_SYMBOL_GPL(vhost_get_vq_desc); /* Reverse the effect of vhost_get_vq_desc. Useful for error handling. */ -void vhost_discard_vq_desc(struct vhost_virtqueue *vq, int n) +void vhost_discard_vq_desc(struct vhost_virtqueue *vq, int n, + unsigned int ndesc) { + vq->next_avail_head -= ndesc; vq->last_avail_idx -= n; } EXPORT_SYMBOL_GPL(vhost_discard_vq_desc); diff --git a/drivers/vhost/vhost.h b/drivers/vhost/vhost.h index 621a6d9a8791..69a39540df3d 100644 --- a/drivers/vhost/vhost.h +++ b/drivers/vhost/vhost.h @@ -230,7 +230,14 @@ int vhost_get_vq_desc(struct vhost_virtqueue *, struct iovec iov[], unsigned int iov_size, unsigned int *out_num, unsigned int *in_num, struct vhost_log *log, unsigned int *log_num); -void vhost_discard_vq_desc(struct vhost_virtqueue *, int n); + +int vhost_get_vq_desc_n(struct vhost_virtqueue *vq, + struct iovec iov[], unsigned int iov_size, + unsigned int *out_num, unsigned int *in_num, + struct vhost_log *log, unsigned int *log_num, + unsigned int *ndesc); + +void vhost_discard_vq_desc(struct vhost_virtqueue *, int n, unsigned int ndesc); bool vhost_vq_work_queue(struct vhost_virtqueue *vq, struct vhost_work *work); bool vhost_vq_has_work(struct vhost_virtqueue *vq); -- 2.31.1

1 month

2
6
0 0

Inquiry about purchasing your products.

by PERDIS SUPER U

-- Hi, PERDIS SUPER U is a leading retail group in France with numerous outlets across the country. After reviewing your company profile and products, we’re very interested in establishing a long-term partnership. Kindly share your product catalog or website so we can review your offerings and pricing. We are ready to place orders and begin cooperation.Please note: Our payment terms are SWIFT, 14 days after delivery. Looking forward to your response. Best regards, Dominique Schelcher Director, PERDIS SUPER U RUE DE SAVOIE, 45600 SAINT-PÈRE-SUR-LOIRE VAT: FR65380071464 www.magasins-u.com

1 month

1
0
0 0

Re: RFQ

by Zarja®

1 month

1
0
0 0

+ unshare-fix-nsproxy-leak-on-set_cred_ucounts-error-path.patch added to mm-nonmm-unstable branch

by Andrew Morton

The patch titled Subject: unshare: fix nsproxy leak on set_cred_ucounts() error path has been added to the -mm mm-nonmm-unstable branch. Its filename is unshare-fix-nsproxy-leak-on-set_cred_ucounts-error-path.patch This patch will shortly appear at https://git.kernel.org/pub/scm/linux/kernel/git/akpm/25-new.git/tree/patche… This patch will later appear in the mm-nonmm-unstable branch at git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm Before you just go and hit "reply", please: a) Consider who else should be cc'ed b) Prefer to cc a suitable mailing list as well c) Ideally: find the original patch on the mailing list and do a reply-to-all to that, adding suitable additional cc's *** Remember to use Documentation/process/submit-checklist.rst when testing your code *** The -mm tree is included into linux-next via the mm-everything branch at git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm and is updated there every 2-3 working days ------------------------------------------------------ From: Pavel Tikhomirov <ptikhomirov(a)virtuozzo.com> Subject: unshare: fix nsproxy leak on set_cred_ucounts() error path Date: Tue, 18 Nov 2025 14:45:50 +0800 If unshare_nsproxy_namespaces() successfully creates the new_nsproxy, but then set_cred_ucounts() fails, on its error path there is no cleanup for new_nsproxy, so it is leaked. Let's fix that by freeing new_nsproxy if it's not NULL on this error path. Link: https://lkml.kernel.org/r/20251118064552.936962-1-ptikhomirov@virtuozzo.com Fixes: 905ae01c4ae2a ("Add a reference to ucounts for each cred") Signed-off-by: Pavel Tikhomirov <ptikhomirov(a)virtuozzo.com> Acked-by: Alexey Gladkov <legion(a)kernel.org> Reviewed-by: Liam R. Howlett <Liam.Howlett(a)oracle.com> Cc: Ben Segall <bsegall(a)google.com> Cc: Dietmar Eggemann <dietmar.eggemann(a)arm.com> Cc: Eric Biederman <ebiederm(a)xmission.com> Cc: Ingo Molnar <mingo(a)redhat.com> Cc: Juri Lelli <juri.lelli(a)redhat.com> Cc: Kees Cook <kees(a)kernel.org> Cc: Lorenzo Stoakes <lorenzo.stoakes(a)oracle.com> Cc: Mel Gorman <mgorman <mgorman(a)suse.de> Cc: Michal Hocko <mhocko(a)suse.com> Cc: Mike Rapoport <rppt(a)kernel.org> Cc: Peter Zijlstra <peterz(a)infradead.org> Cc: Steven Rostedt <rostedt(a)goodmis.org> Cc: Suren Baghdasaryan <surenb(a)google.com> Cc: Valentin Schneider <vschneid(a)redhat.com> Cc: Vincent Guittot <vincent.guittot(a)linaro.org> Cc: Vlastimil Babka <vbabka(a)suse.cz> Cc: <stable(a)vger.kernel.org> Signed-off-by: Andrew Morton <akpm(a)linux-foundation.org> --- kernel/fork.c | 5 ++++- 1 file changed, 4 insertions(+), 1 deletion(-) --- a/kernel/fork.c~unshare-fix-nsproxy-leak-on-set_cred_ucounts-error-path +++ a/kernel/fork.c @@ -3133,8 +3133,11 @@ int ksys_unshare(unsigned long unshare_f if (new_cred) { err = set_cred_ucounts(new_cred); - if (err) + if (err) { + if (new_nsproxy) + free_nsproxy(new_nsproxy); goto bad_unshare_cleanup_cred; + } } if (new_fs || new_fd || do_sysvsem || new_cred || new_nsproxy) { _ Patches currently in -mm which might be from ptikhomirov(a)virtuozzo.com are unshare-fix-nsproxy-leak-on-set_cred_ucounts-error-path.patch

1 month

1
0
0 0

[PATCH v2 0/3] SDM630/660: Add missing MDSS reset

by Alexey Minnekhanov

Since kernel 6.17 display stack needs to reset the hardware properly to ensure that we don't run into issues with the hardware configured by the bootloader. MDSS reset is necessary to have working display when the bootloader has already initialized it for the boot splash screen. Signed-off-by: Alexey Minnekhanov <alexeymin(a)postmarketos.org> --- Changes in v2: - Added "Fixes" tag, pointing to commit which is the root cause for exposing this "bug", which is only present since 6.17 - Extended commit messages - Prepared series using correct user.email git setting - Link to v1: https://lore.kernel.org/r/20251031-sdm660-mdss-reset-v1-0-14cb4e6836f2@post… --- Alexey Minnekhanov (3): dt-bindings: clock: mmcc-sdm660: Add missing MDSS reset clk: qcom: mmcc-sdm660: Add missing MDSS reset arm64: dts: qcom: sdm630: Add missing MDSS reset arch/arm64/boot/dts/qcom/sdm630.dtsi | 1 + drivers/clk/qcom/mmcc-sdm660.c | 1 + include/dt-bindings/clock/qcom,mmcc-sdm660.h | 1 + 3 files changed, 3 insertions(+) --- base-commit: 1cc41c88ef00de0f3216c5f4b9cfab47de1c49d3 change-id: 20251031-sdm660-mdss-reset-015a46a238b5 Best regards, -- Alexey Minnekhanov <alexeymin(a)postmarketos.org>

1 month

5
8
0 0

2025

2024

2023

2022

2021

2020

2019

2018

2017

Linux-stable-mirror November 2025