September 2024 - Linux-stable-mirror

[PATCH] usb: dwc3: Wait for EndXfer completion before restoring GUSB2PHYCFG

by Prashanth K

DWC3 programming guide mentions that when operating in USB2.0 speeds, if GUSB2PHYCFG[6] or GUSB2PHYCFG[8] is set, it must be cleared prior to issuing commands and may be set again after the command completes. But currently while issuing EndXfer command without CmdIOC set, we wait for 1ms after GUSB2PHYCFG is restored. This results in cases where EndXfer command doesn't get completed and causes SMMU faults since requests are unmapped afterwards. Hence restore GUSB2PHYCFG after waiting for EndXfer command completion. Cc: stable(a)vger.kernel.org Fixes: 1d26ba0944d3 ("usb: dwc3: Wait unconditionally after issuing EndXfer command") Signed-off-by: Prashanth K <quic_prashk(a)quicinc.com> --- drivers/usb/dwc3/gadget.c | 10 ++++++---- 1 file changed, 6 insertions(+), 4 deletions(-) diff --git a/drivers/usb/dwc3/gadget.c b/drivers/usb/dwc3/gadget.c index 291bc549935b..50772d611582 100644 --- a/drivers/usb/dwc3/gadget.c +++ b/drivers/usb/dwc3/gadget.c @@ -438,6 +438,10 @@ int dwc3_send_gadget_ep_cmd(struct dwc3_ep *dep, unsigned int cmd, dwc3_gadget_ep_get_transfer_index(dep); } + if (DWC3_DEPCMD_CMD(cmd) == DWC3_DEPCMD_ENDTRANSFER && + !(cmd & DWC3_DEPCMD_CMDIOC)) + mdelay(1); + if (saved_config) { reg = dwc3_readl(dwc->regs, DWC3_GUSB2PHYCFG(0)); reg |= saved_config; @@ -1715,12 +1719,10 @@ static int __dwc3_stop_active_transfer(struct dwc3_ep *dep, bool force, bool int WARN_ON_ONCE(ret); dep->resource_index = 0; - if (!interrupt) { - mdelay(1); + if (!interrupt) dep->flags &= ~DWC3_EP_TRANSFER_STARTED; - } else if (!ret) { + else if (!ret) dep->flags |= DWC3_EP_END_TRANSFER_PENDING; - } dep->flags &= ~DWC3_EP_DELAY_STOP; return ret; -- 2.25.1

5 months, 3 weeks

2
3
0 0

[PATCH] iwlegacy: Clear stale interrupts before enabling interrupts

by Ville Syrjala

From: Ville Syrjälä <ville.syrjala(a)linux.intel.com> iwl4965 fails upon resume from hibernation on my laptop. The reason seems to be a stale interrupt which isn't being cleared out before interrupts are enabled. We end up with a race beween the resume trying to bring things back up, and the restart work (queued form the interrupt handler) trying to bring things down. Eventually the whole thing blows up. Fix the problem by clearing out any stale interrupts before interrupts get enabled. Here's a debug log of the indicent: [ 12.042589] ieee80211 phy0: il_isr ISR inta 0x00000080, enabled 0xaa00008b, fh 0x00000000 [ 12.042625] ieee80211 phy0: il4965_irq_tasklet inta 0x00000080, enabled 0x00000000, fh 0x00000000 [ 12.042651] iwl4965 0000:10:00.0: RF_KILL bit toggled to enable radio. [ 12.042653] iwl4965 0000:10:00.0: On demand firmware reload [ 12.042690] ieee80211 phy0: il4965_irq_tasklet End inta 0x00000000, enabled 0xaa00008b, fh 0x00000000, flags 0x00000282 [ 12.052207] ieee80211 phy0: il4965_mac_start enter [ 12.052212] ieee80211 phy0: il_prep_station Add STA to driver ID 31: ff:ff:ff:ff:ff:ff [ 12.052244] ieee80211 phy0: il4965_set_hw_ready hardware ready [ 12.052324] ieee80211 phy0: il_apm_init Init card's basic functions [ 12.052348] ieee80211 phy0: il_apm_init L1 Enabled; Disabling L0S [ 12.055727] ieee80211 phy0: il4965_load_bsm Begin load bsm [ 12.056140] ieee80211 phy0: il4965_verify_bsm Begin verify bsm [ 12.058642] ieee80211 phy0: il4965_verify_bsm BSM bootstrap uCode image OK [ 12.058721] ieee80211 phy0: il4965_load_bsm BSM write complete, poll 1 iterations [ 12.058734] ieee80211 phy0: __il4965_up iwl4965 is coming up [ 12.058737] ieee80211 phy0: il4965_mac_start Start UP work done. [ 12.058757] ieee80211 phy0: __il4965_down iwl4965 is going down [ 12.058761] ieee80211 phy0: il_scan_cancel_timeout Scan cancel timeout [ 12.058762] ieee80211 phy0: il_do_scan_abort Not performing scan to abort [ 12.058765] ieee80211 phy0: il_clear_ucode_stations Clearing ucode stations in driver [ 12.058767] ieee80211 phy0: il_clear_ucode_stations No active stations found to be cleared [ 12.058819] ieee80211 phy0: _il_apm_stop Stop card, put in low power state [ 12.058827] ieee80211 phy0: _il_apm_stop_master stop master [ 12.058864] ieee80211 phy0: il4965_clear_free_frames 0 frames on pre-allocated heap on clear. [ 12.058869] ieee80211 phy0: Hardware restart was requested [ 16.132299] iwl4965 0000:10:00.0: START_ALIVE timeout after 4000ms. [ 16.132303] ------------[ cut here ]------------ [ 16.132304] Hardware became unavailable upon resume. This could be a software issue prior to suspend or a hardware issue. [ 16.132338] WARNING: CPU: 0 PID: 181 at net/mac80211/util.c:1826 ieee80211_reconfig+0x8f/0x14b0 [mac80211] [ 16.132390] Modules linked in: ctr ccm sch_fq_codel xt_tcpudp xt_multiport xt_state iptable_filter iptable_nat nf_nat nf_conntrack nf_defrag_ipv4 ip_tables x_tables binfmt_misc joydev mousedev btusb btrtl btintel btbcm bluetooth ecdh_generic ecc iTCO_wdt i2c_dev iwl4965 iwlegacy coretemp snd_hda_codec_analog pcspkr psmouse mac80211 snd_hda_codec_generic libarc4 sdhci_pci cqhci sha256_generic sdhci libsha256 firewire_ohci snd_hda_intel snd_intel_dspcfg mmc_core snd_hda_codec snd_hwdep firewire_core led_class iosf_mbi snd_hda_core uhci_hcd lpc_ich crc_itu_t cfg80211 ehci_pci ehci_hcd snd_pcm usbcore mfd_core rfkill snd_timer snd usb_common soundcore video parport_pc parport intel_agp wmi intel_gtt backlight e1000e agpgart evdev [ 16.132456] CPU: 0 UID: 0 PID: 181 Comm: kworker/u8:6 Not tainted 6.11.0-cl+ #143 [ 16.132460] Hardware name: Hewlett-Packard HP Compaq 6910p/30BE, BIOS 68MCU Ver. F.19 07/06/2010 [ 16.132463] Workqueue: async async_run_entry_fn [ 16.132469] RIP: 0010:ieee80211_reconfig+0x8f/0x14b0 [mac80211] [ 16.132501] Code: da 02 00 00 c6 83 ad 05 00 00 00 48 89 df e8 98 1b fc ff 85 c0 41 89 c7 0f 84 e9 02 00 00 48 c7 c7 a0 e6 48 a0 e8 d1 77 c4 e0 <0f> 0b eb 2d 84 c0 0f 85 8b 01 00 00 c6 87 ad 05 00 00 00 e8 69 1b [ 16.132504] RSP: 0018:ffffc9000029fcf0 EFLAGS: 00010282 [ 16.132507] RAX: 0000000000000000 RBX: ffff8880072008e0 RCX: 0000000000000001 [ 16.132509] RDX: ffffffff81f21a18 RSI: 0000000000000086 RDI: 0000000000000001 [ 16.132510] RBP: ffff8880072003c0 R08: 0000000000000000 R09: 0000000000000003 [ 16.132512] R10: 0000000000000000 R11: ffff88807e5b0000 R12: 0000000000000001 [ 16.132514] R13: 0000000000000000 R14: 0000000000000000 R15: 00000000ffffff92 [ 16.132515] FS: 0000000000000000(0000) GS:ffff88807c200000(0000) knlGS:0000000000000000 [ 16.132517] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [ 16.132519] CR2: 000055dd43786c08 CR3: 000000000978f000 CR4: 00000000000006f0 [ 16.132521] Call Trace: [ 16.132525] <TASK> [ 16.132526] ? __warn+0x77/0x120 [ 16.132532] ? ieee80211_reconfig+0x8f/0x14b0 [mac80211] [ 16.132564] ? report_bug+0x15c/0x190 [ 16.132568] ? handle_bug+0x36/0x70 [ 16.132571] ? exc_invalid_op+0x13/0x60 [ 16.132573] ? asm_exc_invalid_op+0x16/0x20 [ 16.132579] ? ieee80211_reconfig+0x8f/0x14b0 [mac80211] [ 16.132611] ? snd_hdac_bus_init_cmd_io+0x24/0x200 [snd_hda_core] [ 16.132617] ? pick_eevdf+0x133/0x1c0 [ 16.132622] ? check_preempt_wakeup_fair+0x70/0x90 [ 16.132626] ? wakeup_preempt+0x4a/0x60 [ 16.132628] ? ttwu_do_activate.isra.0+0x5a/0x190 [ 16.132632] wiphy_resume+0x79/0x1a0 [cfg80211] [ 16.132675] ? wiphy_suspend+0x2a0/0x2a0 [cfg80211] [ 16.132697] dpm_run_callback+0x75/0x1b0 [ 16.132703] device_resume+0x97/0x200 [ 16.132707] async_resume+0x14/0x20 [ 16.132711] async_run_entry_fn+0x1b/0xa0 [ 16.132714] process_one_work+0x13d/0x350 [ 16.132718] worker_thread+0x2be/0x3d0 [ 16.132722] ? cancel_delayed_work_sync+0x70/0x70 [ 16.132725] kthread+0xc0/0xf0 [ 16.132729] ? kthread_park+0x80/0x80 [ 16.132732] ret_from_fork+0x28/0x40 [ 16.132735] ? kthread_park+0x80/0x80 [ 16.132738] ret_from_fork_asm+0x11/0x20 [ 16.132741] </TASK> [ 16.132742] ---[ end trace 0000000000000000 ]--- [ 16.132930] ------------[ cut here ]------------ [ 16.132932] WARNING: CPU: 0 PID: 181 at net/mac80211/driver-ops.c:41 drv_stop+0xe7/0xf0 [mac80211] [ 16.132957] Modules linked in: ctr ccm sch_fq_codel xt_tcpudp xt_multiport xt_state iptable_filter iptable_nat nf_nat nf_conntrack nf_defrag_ipv4 ip_tables x_tables binfmt_misc joydev mousedev btusb btrtl btintel btbcm bluetooth ecdh_generic ecc iTCO_wdt i2c_dev iwl4965 iwlegacy coretemp snd_hda_codec_analog pcspkr psmouse mac80211 snd_hda_codec_generic libarc4 sdhci_pci cqhci sha256_generic sdhci libsha256 firewire_ohci snd_hda_intel snd_intel_dspcfg mmc_core snd_hda_codec snd_hwdep firewire_core led_class iosf_mbi snd_hda_core uhci_hcd lpc_ich crc_itu_t cfg80211 ehci_pci ehci_hcd snd_pcm usbcore mfd_core rfkill snd_timer snd usb_common soundcore video parport_pc parport intel_agp wmi intel_gtt backlight e1000e agpgart evdev [ 16.133014] CPU: 0 UID: 0 PID: 181 Comm: kworker/u8:6 Tainted: G W 6.11.0-cl+ #143 [ 16.133018] Tainted: [W]=WARN [ 16.133019] Hardware name: Hewlett-Packard HP Compaq 6910p/30BE, BIOS 68MCU Ver. F.19 07/06/2010 [ 16.133021] Workqueue: async async_run_entry_fn [ 16.133025] RIP: 0010:drv_stop+0xe7/0xf0 [mac80211] [ 16.133048] Code: 48 85 c0 74 0e 48 8b 78 08 89 ea 48 89 de e8 e0 87 04 00 65 ff 0d d1 de c4 5f 0f 85 42 ff ff ff e8 be 52 c2 e0 e9 38 ff ff ff <0f> 0b 5b 5d c3 0f 1f 40 00 41 54 49 89 fc 55 53 48 89 f3 2e 2e 2e [ 16.133050] RSP: 0018:ffffc9000029fc50 EFLAGS: 00010246 [ 16.133053] RAX: 0000000000000000 RBX: ffff8880072008e0 RCX: ffff88800377f6c0 [ 16.133054] RDX: 0000000000000001 RSI: 0000000000000000 RDI: ffff8880072008e0 [ 16.133056] RBP: 0000000000000000 R08: ffffffff81f238d8 R09: 0000000000000000 [ 16.133058] R10: ffff8880080520f0 R11: 0000000000000000 R12: ffff888008051c60 [ 16.133060] R13: ffff8880072008e0 R14: 0000000000000000 R15: ffff8880072011d8 [ 16.133061] FS: 0000000000000000(0000) GS:ffff88807c200000(0000) knlGS:0000000000000000 [ 16.133063] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [ 16.133065] CR2: 000055dd43786c08 CR3: 000000000978f000 CR4: 00000000000006f0 [ 16.133067] Call Trace: [ 16.133069] <TASK> [ 16.133070] ? __warn+0x77/0x120 [ 16.133075] ? drv_stop+0xe7/0xf0 [mac80211] [ 16.133098] ? report_bug+0x15c/0x190 [ 16.133100] ? handle_bug+0x36/0x70 [ 16.133103] ? exc_invalid_op+0x13/0x60 [ 16.133105] ? asm_exc_invalid_op+0x16/0x20 [ 16.133109] ? drv_stop+0xe7/0xf0 [mac80211] [ 16.133132] ieee80211_do_stop+0x55a/0x810 [mac80211] [ 16.133161] ? fq_codel_reset+0xa5/0xc0 [sch_fq_codel] [ 16.133164] ieee80211_stop+0x4f/0x180 [mac80211] [ 16.133192] __dev_close_many+0xa2/0x120 [ 16.133195] dev_close_many+0x90/0x150 [ 16.133198] dev_close+0x5d/0x80 [ 16.133200] cfg80211_shutdown_all_interfaces+0x40/0xe0 [cfg80211] [ 16.133223] wiphy_resume+0xb2/0x1a0 [cfg80211] [ 16.133247] ? wiphy_suspend+0x2a0/0x2a0 [cfg80211] [ 16.133269] dpm_run_callback+0x75/0x1b0 [ 16.133273] device_resume+0x97/0x200 [ 16.133277] async_resume+0x14/0x20 [ 16.133280] async_run_entry_fn+0x1b/0xa0 [ 16.133283] process_one_work+0x13d/0x350 [ 16.133287] worker_thread+0x2be/0x3d0 [ 16.133290] ? cancel_delayed_work_sync+0x70/0x70 [ 16.133294] kthread+0xc0/0xf0 [ 16.133296] ? kthread_park+0x80/0x80 [ 16.133299] ret_from_fork+0x28/0x40 [ 16.133302] ? kthread_park+0x80/0x80 [ 16.133304] ret_from_fork_asm+0x11/0x20 [ 16.133307] </TASK> [ 16.133308] ---[ end trace 0000000000000000 ]--- [ 16.133335] ieee80211 phy0: PM: dpm_run_callback(): wiphy_resume [cfg80211] returns -110 [ 16.133360] ieee80211 phy0: PM: failed to restore async: error -110 Cc: stable(a)vger.kernel.org Cc: Stanislaw Gruszka <stf_xl(a)wp.pl> Cc: Kalle Valo <kvalo(a)kernel.org> Cc: linux-wireless(a)vger.kernel.org Signed-off-by: Ville Syrjälä <ville.syrjala(a)linux.intel.com> --- drivers/net/wireless/intel/iwlegacy/common.h | 2 ++ 1 file changed, 2 insertions(+) diff --git a/drivers/net/wireless/intel/iwlegacy/common.h b/drivers/net/wireless/intel/iwlegacy/common.h index 2147781b5fff..758984d527bf 100644 --- a/drivers/net/wireless/intel/iwlegacy/common.h +++ b/drivers/net/wireless/intel/iwlegacy/common.h @@ -2342,6 +2342,8 @@ static inline void il_enable_interrupts(struct il_priv *il) { set_bit(S_INT_ENABLED, &il->status); + _il_wr(il, CSR_INT, 0xffffffff); + _il_wr(il, CSR_FH_INT_STATUS, 0xffffffff); _il_wr(il, CSR_INT_MASK, il->inta_mask); } -- 2.45.2

5 months, 3 weeks

3
4
0 0

[PATCH v2 0/8] binder: several fixes for frozen notification

by Carlos Llamas

These are all fixes for the frozen notification patch [1], which as of today hasn't landed in mainline yet. As such, this patchset is rebased on top of the char-misc-next branch. [1] https://lore.kernel.org/all/20240709070047.4055369-2-yutingtseng@google.com/ Cc: stable(a)vger.kernel.org Cc: Yu-Ting Tseng <yutingtseng(a)google.com> Cc: Alice Ryhl <aliceryhl(a)google.com> Cc: Todd Kjos <tkjos(a)google.com> Cc: Martijn Coenen <maco(a)google.com> Cc: Arve Hjønnevåg <arve(a)android.com> Cc: Viktor Martensson <vmartensson(a)google.com> v1: https://lore.kernel.org/all/20240924184401.76043-1-cmllamas@google.com/ v2: * debug output for BINDER_WORK_CLEAR_FREEZE_NOTIFICATION (Alice) * allow notifications for dead nodes instead of EINVAL (Alice) * add fix for memleak of proc->delivered_freeze * add proc->delivered_freeze to debug output * collect tags Carlos Llamas (8): binder: fix node UAF in binder_add_freeze_work() binder: fix OOB in binder_add_freeze_work() binder: fix freeze UAF in binder_release_work() binder: fix BINDER_WORK_FROZEN_BINDER debug logs binder: fix BINDER_WORK_CLEAR_FREEZE_NOTIFICATION debug logs binder: allow freeze notification for dead nodes binder: fix memleak of proc->delivered_freeze binder: add delivered_freeze to debugfs output drivers/android/binder.c | 64 ++++++++++++++++++++++++++++++---------- 1 file changed, 49 insertions(+), 15 deletions(-) -- 2.46.1.824.gd892dcdcdd-goog

5 months, 3 weeks

4
23
0 0

Dell WD19TB Thunderbolt Dock not working with kernel > 6.6.28-1

by Fabian Stäber

Hi, I got a Dell WD19TBS Thunderbolt Dock, and it has been working with Linux for years without issues. However, updating to linux-lts-6.6.29-1 or newer breaks the USB ports on my Dock. Using the latest non-LTS kernel doesn't help, it also breaks the USB ports. Downgrading the kernel to linux-lts-6.6.28-1 works. This is the last working version. I opened a thread on the Arch Linux forum https://bbs.archlinux.org/viewtopic.php?id=299604 with some dmesg output. However, it sounds like this is a regression in the Linux kernel, so I'm posting this here as well. Let me know if you need any more info. Thanks a lot Fabian

5 months, 3 weeks

6
7
0 0

[PATCH] HID: plantronics: Workaround for an unexcepted opposite volume key

by Wade Wang

Some Plantronics headset as the below send an unexcept opposite volume key's HID report for each volume key press after 200ms, like unecepted Volume Up Key following Volume Down key pressed by user. This patch adds a quirk to hid-plantronics for these devices, which will ignore the second unexcepted opposite volume key if it happens within 220ms from the last one that was handled. Plantronics EncorePro 500 Series (047f:431e) Plantronics Blackwire_3325 Series (047f:430c) The patch was tested on the mentioned model, it shouldn't affect other models, however, this quirk might be needed for them too. Auto-repeat (when a key is held pressed) is not affected per test result. Cc: stable(a)vger.kernel.org Signed-off-by: Wade Wang <wade.wang(a)hp.com> --- drivers/hid/hid-ids.h | 2 ++ drivers/hid/hid-plantronics.c | 23 +++++++++++++++++++++++ 2 files changed, 25 insertions(+) diff --git a/drivers/hid/hid-ids.h b/drivers/hid/hid-ids.h index 781c5aa29859..b72d70bc5628 100644 --- a/drivers/hid/hid-ids.h +++ b/drivers/hid/hid-ids.h @@ -1050,6 +1050,8 @@ #define USB_DEVICE_ID_PLANTRONICS_BLACKWIRE_3220_SERIES 0xc056 #define USB_DEVICE_ID_PLANTRONICS_BLACKWIRE_3215_SERIES 0xc057 #define USB_DEVICE_ID_PLANTRONICS_BLACKWIRE_3225_SERIES 0xc058 +#define USB_DEVICE_ID_PLANTRONICS_BLACKWIRE_3325_SERIES 0x430c +#define USB_DEVICE_ID_PLANTRONICS_ENCOREPRO_500_SERIES 0x431e #define USB_VENDOR_ID_PANASONIC 0x04da #define USB_DEVICE_ID_PANABOARD_UBT780 0x1044 diff --git a/drivers/hid/hid-plantronics.c b/drivers/hid/hid-plantronics.c index 3d414ae194ac..25cfd964dc25 100644 --- a/drivers/hid/hid-plantronics.c +++ b/drivers/hid/hid-plantronics.c @@ -38,8 +38,10 @@ (usage->hid & HID_USAGE_PAGE) == HID_UP_CONSUMER) #define PLT_QUIRK_DOUBLE_VOLUME_KEYS BIT(0) +#define PLT_QUIRK_FOLLOWED_OPPOSITE_VOLUME_KEYS BIT(1) #define PLT_DOUBLE_KEY_TIMEOUT 5 /* ms */ +#define PLT_FOLLOWED_OPPOSITE_KEY_TIMEOUT 220 /* ms */ struct plt_drv_data { unsigned long device_type; @@ -137,6 +139,21 @@ static int plantronics_event(struct hid_device *hdev, struct hid_field *field, drv_data->last_volume_key_ts = cur_ts; } + if (drv_data->quirks & PLT_QUIRK_FOLLOWED_OPPOSITE_VOLUME_KEYS) { + unsigned long prev_ts, cur_ts; + + /* Usages are filtered in plantronics_usages. */ + + if (!value) /* Handle key presses only. */ + return 0; + + prev_ts = drv_data->last_volume_key_ts; + cur_ts = jiffies; + if (jiffies_to_msecs(cur_ts - prev_ts) <= PLT_FOLLOWED_OPPOSITE_KEY_TIMEOUT) + return 1; /* Ignore the followed opposite volume key. */ + + drv_data->last_volume_key_ts = cur_ts; + } return 0; } @@ -210,6 +227,12 @@ static const struct hid_device_id plantronics_devices[] = { { HID_USB_DEVICE(USB_VENDOR_ID_PLANTRONICS, USB_DEVICE_ID_PLANTRONICS_BLACKWIRE_3225_SERIES), .driver_data = PLT_QUIRK_DOUBLE_VOLUME_KEYS }, + { HID_USB_DEVICE(USB_VENDOR_ID_PLANTRONICS, + USB_DEVICE_ID_PLANTRONICS_BLACKWIRE_3325_SERIES), + .driver_data = PLT_QUIRK_FOLLOWED_OPPOSITE_VOLUME_KEYS }, + { HID_USB_DEVICE(USB_VENDOR_ID_PLANTRONICS, + USB_DEVICE_ID_PLANTRONICS_ENCOREPRO_500_SERIES), + .driver_data = PLT_QUIRK_FOLLOWED_OPPOSITE_VOLUME_KEYS }, { HID_USB_DEVICE(USB_VENDOR_ID_PLANTRONICS, HID_ANY_ID) }, { } }; -- Change log: 1. 2nd patch submission: Add one Cc mail aoount in patch comment, per kernel test robot required 2. 3rd patch submission: Code and comment change to Separate this patch with previous patch 'commit f567d6ef8606 ("HID: plantronics: Workaround for double volume key presses")' 2.34.1

5 months, 3 weeks

2
1
0 0

[PATCH v5 1/5] tpm: Return on tpm2_create_null_primary() failure

by Jarkko Sakkinen

tpm2_sessions_init() does not ignores the result of tpm2_create_null_primary(). Address this by returning -ENODEV to the caller. Cc: stable(a)vger.kernel.org # v6.10+ Fixes: d2add27cf2b8 ("tpm: Add NULL primary creation") Signed-off-by: Jarkko Sakkinen <jarkko(a)kernel.org> --- v5: - Do not print klog messages on error, as tpm2_save_context() already takes care of this. v4: - Fixed up stable version. v3: - Handle TPM and POSIX error separately and return -ENODEV always back to the caller. v2: - Refined the commit message. --- drivers/char/tpm/tpm2-sessions.c | 5 +++-- 1 file changed, 3 insertions(+), 2 deletions(-) diff --git a/drivers/char/tpm/tpm2-sessions.c b/drivers/char/tpm/tpm2-sessions.c index d3521aadd43e..0f09ac33ae99 100644 --- a/drivers/char/tpm/tpm2-sessions.c +++ b/drivers/char/tpm/tpm2-sessions.c @@ -1338,7 +1338,8 @@ static int tpm2_create_null_primary(struct tpm_chip *chip) tpm2_flush_context(chip, null_key); } - return rc; + /* Map all errors to -ENODEV: */ + return rc ? -ENODEV : rc; } /** @@ -1354,7 +1355,7 @@ int tpm2_sessions_init(struct tpm_chip *chip) rc = tpm2_create_null_primary(chip); if (rc) - dev_err(&chip->dev, "TPM: security failed (NULL seed derivation): %d\n", rc); + return rc; chip->auth = kmalloc(sizeof(*chip->auth), GFP_KERNEL); if (!chip->auth) -- 2.46.1

5 months, 3 weeks

2
2
0 0

[PATCH v3 1/1] dmaengine: dw: Select only supported masters for ACPI devices

by Andy Shevchenko

From: Serge Semin <fancer.lancer(a)gmail.com> The recently submitted fix-commit revealed a problem in the iDMA 32-bit platform code. Even though the controller supported only a single master the dw_dma_acpi_filter() method hard-coded two master interfaces with IDs 0 and 1. As a result the sanity check implemented in the commit b336268dde75 ("dmaengine: dw: Add peripheral bus width verification") got incorrect interface data width and thus prevented the client drivers from configuring the DMA-channel with the EINVAL error returned. E.g., the next error was printed for the PXA2xx SPI controller driver trying to configure the requested channels: > [ 164.525604] pxa2xx_spi_pci 0000:00:07.1: DMA slave config failed > [ 164.536105] pxa2xx_spi_pci 0000:00:07.1: failed to get DMA TX descriptor > [ 164.543213] spidev spi-SPT0001:00: SPI transfer failed: -16 The problem would have been spotted much earlier if the iDMA 32-bit controller supported more than one master interfaces. But since it supports just a single master and the iDMA 32-bit specific code just ignores the master IDs in the CTLLO preparation method, the issue has been gone unnoticed so far. Fix the problem by specifying the default master ID for both memory and peripheral devices in the driver data. Thus the issue noticed for the iDMA 32-bit controllers will be eliminated and the ACPI-probed DW DMA controllers will be configured with the correct master ID by default. Cc: stable(a)vger.kernel.org Fixes: b336268dde75 ("dmaengine: dw: Add peripheral bus width verification") Fixes: 199244d69458 ("dmaengine: dw: add support of iDMA 32-bit hardware") Reported-by: Ferry Toth <fntoth(a)gmail.com> Closes: https://lore.kernel.org/dmaengine/ZuXbCKUs1iOqFu51@black.fi.intel.com/ Reported-by: Andy Shevchenko <andriy.shevchenko(a)linux.intel.com> Closes: https://lore.kernel.org/dmaengine/ZuXgI-VcHpMgbZ91@black.fi.intel.com/ Co-developed-by: Serge Semin <fancer.lancer(a)gmail.com> Signed-off-by: Serge Semin <fancer.lancer(a)gmail.com> Signed-off-by: Andy Shevchenko <andriy.shevchenko(a)linux.intel.com> --- v3: rewrote to use driver_data v2: https://lore.kernel.org/r/20240919185151.7331-1-fancer.lancer@gmail.com drivers/dma/dw/acpi.c | 6 ++++-- drivers/dma/dw/internal.h | 8 ++++++++ drivers/dma/dw/pci.c | 4 ++-- 3 files changed, 14 insertions(+), 4 deletions(-) diff --git a/drivers/dma/dw/acpi.c b/drivers/dma/dw/acpi.c index c510c109d2c3..b6452fffa657 100644 --- a/drivers/dma/dw/acpi.c +++ b/drivers/dma/dw/acpi.c @@ -8,13 +8,15 @@ static bool dw_dma_acpi_filter(struct dma_chan *chan, void *param) { + struct dw_dma *dw = to_dw_dma(chan->device); + struct dw_dma_chip_pdata *data = dev_get_drvdata(dw->dma.dev); struct acpi_dma_spec *dma_spec = param; struct dw_dma_slave slave = { .dma_dev = dma_spec->dev, .src_id = dma_spec->slave_id, .dst_id = dma_spec->slave_id, - .m_master = 0, - .p_master = 1, + .m_master = data->m_master, + .p_master = data->p_master, }; return dw_dma_filter(chan, &slave); diff --git a/drivers/dma/dw/internal.h b/drivers/dma/dw/internal.h index 779b3cbcf30d..99d9f61b2254 100644 --- a/drivers/dma/dw/internal.h +++ b/drivers/dma/dw/internal.h @@ -51,11 +51,15 @@ struct dw_dma_chip_pdata { int (*probe)(struct dw_dma_chip *chip); int (*remove)(struct dw_dma_chip *chip); struct dw_dma_chip *chip; + u8 m_master; + u8 p_master; }; static __maybe_unused const struct dw_dma_chip_pdata dw_dma_chip_pdata = { .probe = dw_dma_probe, .remove = dw_dma_remove, + .m_master = 0, + .p_master = 1, }; static const struct dw_dma_platform_data idma32_pdata = { @@ -72,6 +76,8 @@ static __maybe_unused const struct dw_dma_chip_pdata idma32_chip_pdata = { .pdata = &idma32_pdata, .probe = idma32_dma_probe, .remove = idma32_dma_remove, + .m_master = 0, + .p_master = 0, }; static const struct dw_dma_platform_data xbar_pdata = { @@ -88,6 +94,8 @@ static __maybe_unused const struct dw_dma_chip_pdata xbar_chip_pdata = { .pdata = &xbar_pdata, .probe = idma32_dma_probe, .remove = idma32_dma_remove, + .m_master = 0, + .p_master = 0, }; int dw_dma_fill_pdata(struct device *dev, struct dw_dma_platform_data *pdata); diff --git a/drivers/dma/dw/pci.c b/drivers/dma/dw/pci.c index adf2d69834b8..a3aae3d1c093 100644 --- a/drivers/dma/dw/pci.c +++ b/drivers/dma/dw/pci.c @@ -56,10 +56,10 @@ static int dw_pci_probe(struct pci_dev *pdev, const struct pci_device_id *pid) if (ret) return ret; - dw_dma_acpi_controller_register(chip->dw); - pci_set_drvdata(pdev, data); + dw_dma_acpi_controller_register(chip->dw); + return 0; } -- 2.43.0.rc1.1336.g36b5255a03ac

5 months, 3 weeks

3
8
0 0

[PATCH 0/3] crypto: Fix data mismatch over ipsec tunnel encrypted/decrypted with ppc64le AES/GCM module.

by Danny Tsen

Fix data mismatch over ipsec tunnel encrypted/decrypted with ppc64le AES/GCM module. This patch is to fix an issue when simd is not usable that data mismatch may occur. The fix is to register algs as SIMD modules so that the algorithm is excecuted when SIMD instructions is usable. A new module rfc4106(gcm(aes)) is also added. Re-write AES/GCM assembly codes with smaller footprints and small performance gain. This patch has been tested with the kernel crypto module tcrypt.ko and has passed the selftest. The patch is also tested with CONFIG_CRYPTO_MANAGER_EXTRA_TESTS enabled. Fixes: fd0e9b3e2ee6 ("crypto: p10-aes-gcm - An accelerated AES/GCM stitched implementation") Fixes: cdcecfd9991f ("crypto: p10-aes-gcm - Glue code for AES/GCM stitched implementation") Fixes: 45a4672b9a6e2 ("crypto: p10-aes-gcm - Update Kconfig and Makefile") Signed-off-by: Danny Tsen <dtsen(a)linux.ibm.com> Danny Tsen (3): crypto: Re-write AES/GCM stitched implementation for ppcle64. crypto: Register modules as SIMD modules for ppcle64 AES/GCM algs. crypto: added CRYPTO_SIMD in Kconfig for CRYPTO_AES_GCM_P10. arch/powerpc/crypto/Kconfig | 2 +- arch/powerpc/crypto/aes-gcm-p10-glue.c | 141 +- arch/powerpc/crypto/aes-gcm-p10.S | 2421 +++++++++++------------- 3 files changed, 1187 insertions(+), 1377 deletions(-) -- 2.43.0

5 months, 3 weeks

3
6
0 0

[PATCH] KEYS: Print digitalSignature and CA link errors

by Kevin Bowling

ENOKEY is overloaded for several different failure types in these link functions. In addition, by the time we are consuming the return several other methods can return ENOKEY. Add some error prints to help diagnose fundamental certificate issues. Cc: stable(a)vger.kernel.org Signed-off-by: Kevin Bowling <kevin.bowling(a)kev009.com> --- crypto/asymmetric_keys/restrict.c | 24 ++++++++++++++++++------ 1 file changed, 18 insertions(+), 6 deletions(-) diff --git a/crypto/asymmetric_keys/restrict.c b/crypto/asymmetric_keys/restrict.c index afcd4d101ac5..472561e451b3 100644 --- a/crypto/asymmetric_keys/restrict.c +++ b/crypto/asymmetric_keys/restrict.c @@ -140,14 +140,20 @@ int restrict_link_by_ca(struct key *dest_keyring, pkey = payload->data[asym_crypto]; if (!pkey) return -ENOPKG; - if (!test_bit(KEY_EFLAG_CA, &pkey->key_eflags)) + if (!test_bit(KEY_EFLAG_CA, &pkey->key_eflags)) { + pr_err("Missing CA usage bit\n"); return -ENOKEY; - if (!test_bit(KEY_EFLAG_KEYCERTSIGN, &pkey->key_eflags)) + } + if (!test_bit(KEY_EFLAG_KEYCERTSIGN, &pkey->key_eflags)) { + pr_err("Missing keyCertSign usage bit\n"); return -ENOKEY; + } if (!IS_ENABLED(CONFIG_INTEGRITY_CA_MACHINE_KEYRING_MAX)) return 0; - if (test_bit(KEY_EFLAG_DIGITALSIG, &pkey->key_eflags)) + if (test_bit(KEY_EFLAG_DIGITALSIG, &pkey->key_eflags)) { + pr_err("Unexpected digitalSignature usage bit\n"); return -ENOKEY; + } return 0; } @@ -183,14 +189,20 @@ int restrict_link_by_digsig(struct key *dest_keyring, if (!pkey) return -ENOPKG; - if (!test_bit(KEY_EFLAG_DIGITALSIG, &pkey->key_eflags)) + if (!test_bit(KEY_EFLAG_DIGITALSIG, &pkey->key_eflags)) { + pr_err("Missing digitalSignature usage bit\n"); return -ENOKEY; + } - if (test_bit(KEY_EFLAG_CA, &pkey->key_eflags)) + if (test_bit(KEY_EFLAG_CA, &pkey->key_eflags)) { + pr_err("Unexpected CA usage bit\n"); return -ENOKEY; + } - if (test_bit(KEY_EFLAG_KEYCERTSIGN, &pkey->key_eflags)) + if (test_bit(KEY_EFLAG_KEYCERTSIGN, &pkey->key_eflags)) { + pr_err("Unexpected keyCertSign usage bit\n"); return -ENOKEY; + } return restrict_link_by_signature(dest_keyring, type, payload, trust_keyring); -- 2.46.0

5 months, 3 weeks

1
1
0 0

[RESEND PATCH] sched/syscalls: Allow setting niceness using sched_param struct

by Michael Pratt

From userspace, spawning a new process with, for example, posix_spawn(), only allows the user to work with the scheduling priority value defined by POSIX in the sched_param struct. However, sched_setparam() and similar syscalls lead to __sched_setscheduler() which rejects any new value for the priority other than 0 for non-RT schedule classes, a behavior kept since Linux 2.6 or earlier. Linux translates the usage of the sched_param struct into it's own internal sched_attr struct during the syscall, but the user has no way to manage the other values within the sched_attr struct using only POSIX functions. The only other way to adjust niceness while using posix_spawn() would be to set the value after the process has started, but this introduces the risk of the process being dead before the next syscall can set the priority after the fact. To resolve this, allow the use of the priority value originally from the POSIX sched_param struct in order to set the niceness value instead of rejecting the priority value. Edit the sched_get_priority_*() POSIX syscalls in order to reflect the range of values accepted. Cc: stable(a)vger.kernel.org # Apply to kernel/sched/core.c Signed-off-by: Michael Pratt <mcpratt(a)pm.me> --- kernel/sched/syscalls.c | 21 +++++++++++++++++++-- 1 file changed, 19 insertions(+), 2 deletions(-) diff --git a/kernel/sched/syscalls.c b/kernel/sched/syscalls.c index ae1b42775ef9..52c02b80f037 100644 --- a/kernel/sched/syscalls.c +++ b/kernel/sched/syscalls.c @@ -853,6 +853,19 @@ static int _sched_setscheduler(struct task_struct *p, int policy, attr.sched_policy = policy; } + if (attr.sched_priority > MAX_PRIO-1) + return -EINVAL; + + /* + * If priority is set for SCHED_NORMAL or SCHED_BATCH, + * set the niceness instead, but only for user calls. + */ + if (check && attr.sched_priority > MAX_RT_PRIO-1 && + ((policy != SETPARAM_POLICY && fair_policy(policy)) || fair_policy(p->policy))) { + attr.sched_nice = PRIO_TO_NICE(attr.sched_priority); + attr.sched_priority = 0; + } + return __sched_setscheduler(p, &attr, check, true); } /** @@ -1598,9 +1611,11 @@ SYSCALL_DEFINE1(sched_get_priority_max, int, policy) case SCHED_RR: ret = MAX_RT_PRIO-1; break; - case SCHED_DEADLINE: case SCHED_NORMAL: case SCHED_BATCH: + ret = MAX_PRIO-1; + break; + case SCHED_DEADLINE: case SCHED_IDLE: ret = 0; break; @@ -1625,9 +1640,11 @@ SYSCALL_DEFINE1(sched_get_priority_min, int, policy) case SCHED_RR: ret = 1; break; - case SCHED_DEADLINE: case SCHED_NORMAL: case SCHED_BATCH: + ret = MAX_RT_PRIO; + break; + case SCHED_DEADLINE: case SCHED_IDLE: ret = 0; } base-commit: 5be63fc19fcaa4c236b307420483578a56986a37 -- 2.30.2

5 months, 3 weeks

2
5
0 0

2025

2024

2023

2022

2021

2020

2019

2018

2017

Linux-stable-mirror September 2024