September 2024 - Linux-stable-mirror

[PATCH stable-6.10 regression] Revert "soundwire: stream: fix programming slave ports for non-continous port maps"

by Peter Ujfalusi

The prop->src_dpn_prop and prop.sink_dpn_prop is allocated for the _number_ of ports and it is forced as 0 index based. The original code was correct while the change to walk the bits and use their position as index into the arrays is not correct. For exmple we can have the prop.source_ports=0x2, which means we have one port, but the prop.src_dpn_prop[1] is accessing outside of the allocated memory. This reverts commit 6fa78e9c41471fe43052cd6feba6eae1b0277ae3. Cc: stable(a)vger.kernel.org # 6.10.y Signed-off-by: Peter Ujfalusi <peter.ujfalusi(a)linux.intel.com> --- Hi, The reverted patch causes major regression on soundwire causing all audio to fail. Interestingly the patch is only in 6.10.8 and 6.10.9, not in mainline or linux-next. soundwire sdw-master-0-1: Program transport params failed: -22 soundwire sdw-master-0-1: Program params failed: -22 SDW1-Playback: ASoC: error at snd_soc_link_prepare on SDW1-Playback: -22 Regards, Peter drivers/soundwire/stream.c | 8 ++++---- 1 file changed, 4 insertions(+), 4 deletions(-) diff --git a/drivers/soundwire/stream.c b/drivers/soundwire/stream.c index 00191b1d2260..4e9e7d2a942d 100644 --- a/drivers/soundwire/stream.c +++ b/drivers/soundwire/stream.c @@ -1286,18 +1286,18 @@ struct sdw_dpn_prop *sdw_get_slave_dpn_prop(struct sdw_slave *slave, unsigned int port_num) { struct sdw_dpn_prop *dpn_prop; - unsigned long mask; + u8 num_ports; int i; if (direction == SDW_DATA_DIR_TX) { - mask = slave->prop.source_ports; + num_ports = hweight32(slave->prop.source_ports); dpn_prop = slave->prop.src_dpn_prop; } else { - mask = slave->prop.sink_ports; + num_ports = hweight32(slave->prop.sink_ports); dpn_prop = slave->prop.sink_dpn_prop; } - for_each_set_bit(i, &mask, 32) { + for (i = 0; i < num_ports; i++) { if (dpn_prop[i].num == port_num) return &dpn_prop[i]; } -- 2.46.0

8 months

5
8
0 0

[PATCH 5.10.y] dma-buf: heaps: Fix off-by-one in CMA heap fault handler

by T.J. Mercier

commit ea5ff5d351b520524019f7ff7f9ce418de2dad87 upstream. Until VM_DONTEXPAND was added in commit 1c1914d6e8c6 ("dma-buf: heaps: Don't track CMA dma-buf pages under RssFile") it was possible to obtain a mapping larger than the buffer size via mremap and bypass the overflow check in dma_buf_mmap_internal. When using such a mapping to attempt to fault past the end of the buffer, the CMA heap fault handler also checks the fault offset against the buffer size, but gets the boundary wrong by 1. Fix the boundary check so that we don't read off the end of the pages array and insert an arbitrary page in the mapping. Reported-by: Xingyu Jin <xingyuj(a)google.com> Fixes: a5d2d29e24be ("dma-buf: heaps: Move heap-helper logic into the cma_heap implementation") Cc: stable(a)vger.kernel.org # Applicable >= 5.10. Needs adjustments only for 5.10. Signed-off-by: T.J. Mercier <tjmercier(a)google.com> Acked-by: John Stultz <jstultz(a)google.com> Signed-off-by: Sumit Semwal <sumit.semwal(a)linaro.org> Link: https://patchwork.freedesktop.org/patch/msgid/20240830192627.2546033-1-tjme… [TJ: Backport to 5.10. On this kernel the bug is located in dma_heap_vm_fault which is used by both the CMA and system heaps.] Signed-off-by: T.J. Mercier <tjmercier(a)google.com> --- drivers/dma-buf/heaps/heap-helpers.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/dma-buf/heaps/heap-helpers.c b/drivers/dma-buf/heaps/heap-helpers.c index d0696cf937af..a852b5e8122f 100644 --- a/drivers/dma-buf/heaps/heap-helpers.c +++ b/drivers/dma-buf/heaps/heap-helpers.c @@ -161,7 +161,7 @@ static vm_fault_t dma_heap_vm_fault(struct vm_fault *vmf) struct vm_area_struct *vma = vmf->vma; struct heap_helper_buffer *buffer = vma->vm_private_data; - if (vmf->pgoff > buffer->pagecount) + if (vmf->pgoff >= buffer->pagecount) return VM_FAULT_SIGBUS; vmf->page = buffer->pages[vmf->pgoff]; -- 2.46.0.662.g92d0881bb0-goog

8 months

2
4
0 0

[PATCH 6.6 v3] riscv: dts: starfive: add assigned-clock* to limit frquency

by WangYuli

From: William Qiu <william.qiu(a)starfivetech.com> [ Upstream commit af571133f7ae028ec9b5fdab78f483af13bf28d3 ] In JH7110 SoC, we need to go by-pass mode, so we need add the assigned-clock* properties to limit clock frquency. Signed-off-by: William Qiu <william.qiu(a)starfivetech.com> Reviewed-by: Emil Renner Berthing <emil.renner.berthing(a)canonical.com> Signed-off-by: Conor Dooley <conor.dooley(a)microchip.com> Signed-off-by: WangYuli <wangyuli(a)uniontech.com> --- .../riscv/boot/dts/starfive/jh7110-starfive-visionfive-2.dtsi | 4 ++++ 1 file changed, 4 insertions(+) diff --git a/arch/riscv/boot/dts/starfive/jh7110-starfive-visionfive-2.dtsi b/arch/riscv/boot/dts/starfive/jh7110-starfive-visionfive-2.dtsi index 062b97c6e7df..4874e3bb42ab 100644 --- a/arch/riscv/boot/dts/starfive/jh7110-starfive-visionfive-2.dtsi +++ b/arch/riscv/boot/dts/starfive/jh7110-starfive-visionfive-2.dtsi @@ -204,6 +204,8 @@ &i2c6 { &mmc0 { max-frequency = <100000000>; + assigned-clocks = <&syscrg JH7110_SYSCLK_SDIO0_SDCARD>; + assigned-clock-rates = <50000000>; bus-width = <8>; cap-mmc-highspeed; mmc-ddr-1_8v; @@ -220,6 +222,8 @@ &mmc0 { &mmc1 { max-frequency = <100000000>; + assigned-clocks = <&syscrg JH7110_SYSCLK_SDIO1_SDCARD>; + assigned-clock-rates = <50000000>; bus-width = <4>; no-sdio; no-mmc; -- 2.43.0

8 months

2
1
0 0

+ mm-huge_memory-ensure-huge_zero_folio-wont-have-large_rmappable-flag-set.patch added to mm-hotfixes-unstable branch

by Andrew Morton

The patch titled Subject: mm/huge_memory: ensure huge_zero_folio won't have large_rmappable flag set has been added to the -mm mm-hotfixes-unstable branch. Its filename is mm-huge_memory-ensure-huge_zero_folio-wont-have-large_rmappable-flag-set.patch This patch will shortly appear at https://git.kernel.org/pub/scm/linux/kernel/git/akpm/25-new.git/tree/patche… This patch will later appear in the mm-hotfixes-unstable branch at git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm Before you just go and hit "reply", please: a) Consider who else should be cc'ed b) Prefer to cc a suitable mailing list as well c) Ideally: find the original patch on the mailing list and do a reply-to-all to that, adding suitable additional cc's *** Remember to use Documentation/process/submit-checklist.rst when testing your code *** The -mm tree is included into linux-next via the mm-everything branch at git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm and is updated there every 2-3 working days ------------------------------------------------------ From: Miaohe Lin <linmiaohe(a)huawei.com> Subject: mm/huge_memory: ensure huge_zero_folio won't have large_rmappable flag set Date: Sat, 14 Sep 2024 09:53:06 +0800 Ensure huge_zero_folio won't have large_rmappable flag set. So it can be reported as thp,zero correctly through stable_page_flags(). Link: https://lkml.kernel.org/r/20240914015306.3656791-1-linmiaohe@huawei.com Fixes: 5691753d73a2 ("mm: convert huge_zero_page to huge_zero_folio") Signed-off-by: Miaohe Lin <linmiaohe(a)huawei.com> Cc: David Hildenbrand <david(a)redhat.com> Cc: Matthew Wilcox (Oracle) <willy(a)infradead.org> Cc: <stable(a)vger.kernel.org> Signed-off-by: Andrew Morton <akpm(a)linux-foundation.org> --- mm/huge_memory.c | 2 ++ 1 file changed, 2 insertions(+) --- a/mm/huge_memory.c~mm-huge_memory-ensure-huge_zero_folio-wont-have-large_rmappable-flag-set +++ a/mm/huge_memory.c @@ -220,6 +220,8 @@ retry: count_vm_event(THP_ZERO_PAGE_ALLOC_FAILED); return false; } + /* Ensure zero folio won't have large_rmappable flag set. */ + folio_clear_large_rmappable(zero_folio); preempt_disable(); if (cmpxchg(&huge_zero_folio, NULL, zero_folio)) { preempt_enable(); _ Patches currently in -mm which might be from linmiaohe(a)huawei.com are mm-huge_memory-ensure-huge_zero_folio-wont-have-large_rmappable-flag-set.patch mm-memory-failure-fix-vm_bug_on_pagepagepoisonedpage-when-unpoison-memory.patch

8 months

1
0
0 0

+ mm-hugetlbc-fix-uaf-of-vma-in-hugetlb-fault-pathway.patch added to mm-hotfixes-unstable branch

by Andrew Morton

The patch titled Subject: mm/hugetlb.c: fix UAF of vma in hugetlb fault pathway has been added to the -mm mm-hotfixes-unstable branch. Its filename is mm-hugetlbc-fix-uaf-of-vma-in-hugetlb-fault-pathway.patch This patch will shortly appear at https://git.kernel.org/pub/scm/linux/kernel/git/akpm/25-new.git/tree/patche… This patch will later appear in the mm-hotfixes-unstable branch at git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm Before you just go and hit "reply", please: a) Consider who else should be cc'ed b) Prefer to cc a suitable mailing list as well c) Ideally: find the original patch on the mailing list and do a reply-to-all to that, adding suitable additional cc's *** Remember to use Documentation/process/submit-checklist.rst when testing your code *** The -mm tree is included into linux-next via the mm-everything branch at git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm and is updated there every 2-3 working days ------------------------------------------------------ From: "Vishal Moola (Oracle)" <vishal.moola(a)gmail.com> Subject: mm/hugetlb.c: fix UAF of vma in hugetlb fault pathway Date: Sat, 14 Sep 2024 12:41:19 -0700 Syzbot reports a UAF in hugetlb_fault(). This happens because vmf_anon_prepare() could drop the per-VMA lock and allow the current VMA to be freed before hugetlb_vma_unlock_read() is called. We can fix this by using a modified version of vmf_anon_prepare() that doesn't release the VMA lock on failure, and then release it ourselves after hugetlb_vma_unlock_read(). Link: https://lkml.kernel.org/r/20240914194243.245-2-vishal.moola@gmail.com Fixes: 9acad7ba3e25 ("hugetlb: use vmf_anon_prepare() instead of anon_vma_prepare()") Reported-by: syzbot+2dab93857ee95f2eeb08(a)syzkaller.appspotmail.com Closes: https://lore.kernel.org/linux-mm/00000000000067c20b06219fbc26@google.com/ Signed-off-by: Vishal Moola (Oracle) <vishal.moola(a)gmail.com> Cc: Muchun Song <muchun.song(a)linux.dev> Cc: <stable(a)vger.kernel.org> Signed-off-by: Andrew Morton <akpm(a)linux-foundation.org> --- mm/hugetlb.c | 20 ++++++++++++++++++-- 1 file changed, 18 insertions(+), 2 deletions(-) --- a/mm/hugetlb.c~mm-hugetlbc-fix-uaf-of-vma-in-hugetlb-fault-pathway +++ a/mm/hugetlb.c @@ -6065,7 +6065,7 @@ retry_avoidcopy: * When the original hugepage is shared one, it does not have * anon_vma prepared. */ - ret = vmf_anon_prepare(vmf); + ret = __vmf_anon_prepare(vmf); if (unlikely(ret)) goto out_release_all; @@ -6264,7 +6264,7 @@ static vm_fault_t hugetlb_no_page(struct } if (!(vma->vm_flags & VM_MAYSHARE)) { - ret = vmf_anon_prepare(vmf); + ret = __vmf_anon_prepare(vmf); if (unlikely(ret)) goto out; } @@ -6395,6 +6395,14 @@ static vm_fault_t hugetlb_no_page(struct folio_unlock(folio); out: hugetlb_vma_unlock_read(vma); + + /* + * We must check to release the per-VMA lock. __vmf_anon_prepare() is + * the only way ret can be set to VM_FAULT_RETRY. + */ + if (unlikely(ret & VM_FAULT_RETRY)) + vma_end_read(vma); + mutex_unlock(&hugetlb_fault_mutex_table[hash]); return ret; @@ -6616,6 +6624,14 @@ out_ptl: } out_mutex: hugetlb_vma_unlock_read(vma); + + /* + * We must check to release the per-VMA lock. __vmf_anon_prepare() in + * hugetlb_wp() is the only way ret can be set to VM_FAULT_RETRY. + */ + if (unlikely(ret & VM_FAULT_RETRY)) + vma_end_read(vma); + mutex_unlock(&hugetlb_fault_mutex_table[hash]); /* * Generally it's safe to hold refcount during waiting page lock. But _ Patches currently in -mm which might be from vishal.moola(a)gmail.com are mm-change-vmf_anon_prepare-to-__vmf_anon_prepare.patch mm-hugetlbc-fix-uaf-of-vma-in-hugetlb-fault-pathway.patch

8 months

1
0
0 0

+ mm-change-vmf_anon_prepare-to-__vmf_anon_prepare.patch added to mm-hotfixes-unstable branch

by Andrew Morton

The patch titled Subject: mm: change vmf_anon_prepare() to __vmf_anon_prepare() has been added to the -mm mm-hotfixes-unstable branch. Its filename is mm-change-vmf_anon_prepare-to-__vmf_anon_prepare.patch This patch will shortly appear at https://git.kernel.org/pub/scm/linux/kernel/git/akpm/25-new.git/tree/patche… This patch will later appear in the mm-hotfixes-unstable branch at git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm Before you just go and hit "reply", please: a) Consider who else should be cc'ed b) Prefer to cc a suitable mailing list as well c) Ideally: find the original patch on the mailing list and do a reply-to-all to that, adding suitable additional cc's *** Remember to use Documentation/process/submit-checklist.rst when testing your code *** The -mm tree is included into linux-next via the mm-everything branch at git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm and is updated there every 2-3 working days ------------------------------------------------------ From: "Vishal Moola (Oracle)" <vishal.moola(a)gmail.com> Subject: mm: change vmf_anon_prepare() to __vmf_anon_prepare() Date: Sat, 14 Sep 2024 12:41:18 -0700 Some callers of vmf_anon_prepare() may not want us to release the per-VMA lock ourselves. Rename vmf_anon_prepare() to __vmf_anon_prepare() and let the callers drop the lock when desired. Also, make vmf_anon_prepare() a wrapper that releases the per-VMA lock itself for any callers that don't care. This is in preparation to fix this bug reported by syzbot: https://lore.kernel.org/linux-mm/00000000000067c20b06219fbc26@google.com/ Link: https://lkml.kernel.org/r/20240914194243.245-1-vishal.moola@gmail.com Fixes: 9acad7ba3e25 ("hugetlb: use vmf_anon_prepare() instead of anon_vma_prepare()") Reported-by: syzbot+2dab93857ee95f2eeb08(a)syzkaller.appspotmail.com Closes: https://lore.kernel.org/linux-mm/00000000000067c20b06219fbc26@google.com/ Signed-off-by: Vishal Moola (Oracle) <vishal.moola(a)gmail.com> Cc: Muchun Song <muchun.song(a)linux.dev> Cc: <stable(a)vger.kernel.org> Signed-off-by: Andrew Morton <akpm(a)linux-foundation.org> --- mm/internal.h | 11 ++++++++++- mm/memory.c | 8 +++----- 2 files changed, 13 insertions(+), 6 deletions(-) --- a/mm/internal.h~mm-change-vmf_anon_prepare-to-__vmf_anon_prepare +++ a/mm/internal.h @@ -310,7 +310,16 @@ static inline void wake_throttle_isolate wake_up(wqh); } -vm_fault_t vmf_anon_prepare(struct vm_fault *vmf); +vm_fault_t __vmf_anon_prepare(struct vm_fault *vmf); +static inline vm_fault_t vmf_anon_prepare(struct vm_fault *vmf) +{ + vm_fault_t ret = __vmf_anon_prepare(vmf); + + if (unlikely(ret & VM_FAULT_RETRY)) + vma_end_read(vmf->vma); + return ret; +} + vm_fault_t do_swap_page(struct vm_fault *vmf); void folio_rotate_reclaimable(struct folio *folio); bool __folio_end_writeback(struct folio *folio); --- a/mm/memory.c~mm-change-vmf_anon_prepare-to-__vmf_anon_prepare +++ a/mm/memory.c @@ -3259,7 +3259,7 @@ static inline vm_fault_t vmf_can_call_fa } /** - * vmf_anon_prepare - Prepare to handle an anonymous fault. + * __vmf_anon_prepare - Prepare to handle an anonymous fault. * @vmf: The vm_fault descriptor passed from the fault handler. * * When preparing to insert an anonymous page into a VMA from a @@ -3273,7 +3273,7 @@ static inline vm_fault_t vmf_can_call_fa * Return: 0 if fault handling can proceed. Any other value should be * returned to the caller. */ -vm_fault_t vmf_anon_prepare(struct vm_fault *vmf) +vm_fault_t __vmf_anon_prepare(struct vm_fault *vmf) { struct vm_area_struct *vma = vmf->vma; vm_fault_t ret = 0; @@ -3281,10 +3281,8 @@ vm_fault_t vmf_anon_prepare(struct vm_fa if (likely(vma->anon_vma)) return 0; if (vmf->flags & FAULT_FLAG_VMA_LOCK) { - if (!mmap_read_trylock(vma->vm_mm)) { - vma_end_read(vma); + if (!mmap_read_trylock(vma->vm_mm)) return VM_FAULT_RETRY; - } } if (__anon_vma_prepare(vma)) ret = VM_FAULT_OOM; _ Patches currently in -mm which might be from vishal.moola(a)gmail.com are mm-change-vmf_anon_prepare-to-__vmf_anon_prepare.patch mm-hugetlbc-fix-uaf-of-vma-in-hugetlb-fault-pathway.patch

8 months

1
0
0 0

[PATCH v2] dt-bindings: serial: rs485: Fix rs485-rts-delay property

by Michal Simek

Code expects array only with 2 items which should be checked. But also item checking is not working as it should likely because of incorrect items description. Fixes: d50f974c4f7f ("dt-bindings: serial: Convert rs485 bindings to json-schema") Signed-off-by: Michal Simek <michal.simek(a)amd.com> Cc: <stable(a)vger.kernel.org> --- Changes in v2: - Remove maxItems properties which are not needed - Add stable ML to CC .../devicetree/bindings/serial/rs485.yaml | 19 +++++++++---------- 1 file changed, 9 insertions(+), 10 deletions(-) diff --git a/Documentation/devicetree/bindings/serial/rs485.yaml b/Documentation/devicetree/bindings/serial/rs485.yaml index 9418fd66a8e9..9665de41762e 100644 --- a/Documentation/devicetree/bindings/serial/rs485.yaml +++ b/Documentation/devicetree/bindings/serial/rs485.yaml @@ -18,16 +18,15 @@ properties: description: prop-encoded-array <a b> $ref: /schemas/types.yaml#/definitions/uint32-array items: - items: - - description: Delay between rts signal and beginning of data sent in - milliseconds. It corresponds to the delay before sending data. - default: 0 - maximum: 100 - - description: Delay between end of data sent and rts signal in milliseconds. - It corresponds to the delay after sending data and actual release - of the line. - default: 0 - maximum: 100 + - description: Delay between rts signal and beginning of data sent in + milliseconds. It corresponds to the delay before sending data. + default: 0 + maximum: 50 + - description: Delay between end of data sent and rts signal in milliseconds. + It corresponds to the delay after sending data and actual release + of the line. + default: 0 + maximum: 100 rs485-rts-active-high: description: drive RTS high when sending (this is the default). -- 2.43.0

8 months

2
2
0 0

[PATCH] selftests: mm: Fix build errors on armhf

by Muhammad Usama Anjum

The __NR_mmap isn't found on armhf. The mmap() is commonly available system call and its wrapper is presnet on all architectures. So it should be used directly. It solves problem for armhf and doesn't create problem for architectures as well. Remove sys_mmap() functions as they aren't doing anything else other than calling mmap(). There is no need to set errno = 0 manually as glibc always resets it. For reference errors are as following: CC seal_elf seal_elf.c: In function 'sys_mmap': seal_elf.c:39:33: error: '__NR_mmap' undeclared (first use in this function) 39 | sret = (void *) syscall(__NR_mmap, addr, len, prot, | ^~~~~~~~~ mseal_test.c: In function 'sys_mmap': mseal_test.c:90:33: error: '__NR_mmap' undeclared (first use in this function) 90 | sret = (void *) syscall(__NR_mmap, addr, len, prot, | ^~~~~~~~~ Cc: stable(a)vger.kernel.org Fixes: 4926c7a52de7 ("selftest mm/mseal memory sealing") Signed-off-by: Muhammad Usama Anjum <usama.anjum(a)collabora.com> --- tools/testing/selftests/mm/mseal_test.c | 37 +++++++++---------------- tools/testing/selftests/mm/seal_elf.c | 13 +-------- 2 files changed, 14 insertions(+), 36 deletions(-) diff --git a/tools/testing/selftests/mm/mseal_test.c b/tools/testing/selftests/mm/mseal_test.c index a818f010de479..bfcea5cf9a484 100644 --- a/tools/testing/selftests/mm/mseal_test.c +++ b/tools/testing/selftests/mm/mseal_test.c @@ -81,17 +81,6 @@ static int sys_mprotect_pkey(void *ptr, size_t size, unsigned long orig_prot, return sret; } -static void *sys_mmap(void *addr, unsigned long len, unsigned long prot, - unsigned long flags, unsigned long fd, unsigned long offset) -{ - void *sret; - - errno = 0; - sret = (void *) syscall(__NR_mmap, addr, len, prot, - flags, fd, offset); - return sret; -} - static int sys_munmap(void *ptr, size_t size) { int sret; @@ -172,7 +161,7 @@ static void setup_single_address(int size, void **ptrOut) { void *ptr; - ptr = sys_mmap(NULL, size, PROT_READ, MAP_ANONYMOUS | MAP_PRIVATE, -1, 0); + ptr = mmap(NULL, size, PROT_READ, MAP_ANONYMOUS | MAP_PRIVATE, -1, 0); *ptrOut = ptr; } @@ -181,7 +170,7 @@ static void setup_single_address_rw(int size, void **ptrOut) void *ptr; unsigned long mapflags = MAP_ANONYMOUS | MAP_PRIVATE; - ptr = sys_mmap(NULL, size, PROT_READ | PROT_WRITE, mapflags, -1, 0); + ptr = mmap(NULL, size, PROT_READ | PROT_WRITE, mapflags, -1, 0); *ptrOut = ptr; } @@ -205,7 +194,7 @@ bool seal_support(void) void *ptr; unsigned long page_size = getpagesize(); - ptr = sys_mmap(NULL, page_size, PROT_READ, MAP_ANONYMOUS | MAP_PRIVATE, -1, 0); + ptr = mmap(NULL, page_size, PROT_READ, MAP_ANONYMOUS | MAP_PRIVATE, -1, 0); if (ptr == (void *) -1) return false; @@ -481,8 +470,8 @@ static void test_seal_zero_address(void) int prot; /* use mmap to change protection. */ - ptr = sys_mmap(0, size, PROT_NONE, - MAP_ANONYMOUS | MAP_PRIVATE | MAP_FIXED, -1, 0); + ptr = mmap(0, size, PROT_NONE, + MAP_ANONYMOUS | MAP_PRIVATE | MAP_FIXED, -1, 0); FAIL_TEST_IF_FALSE(ptr == 0); size = get_vma_size(ptr, &prot); @@ -1209,8 +1198,8 @@ static void test_seal_mmap_overwrite_prot(bool seal) } /* use mmap to change protection. */ - ret2 = sys_mmap(ptr, size, PROT_NONE, - MAP_ANONYMOUS | MAP_PRIVATE | MAP_FIXED, -1, 0); + ret2 = mmap(ptr, size, PROT_NONE, + MAP_ANONYMOUS | MAP_PRIVATE | MAP_FIXED, -1, 0); if (seal) { FAIL_TEST_IF_FALSE(ret2 == MAP_FAILED); FAIL_TEST_IF_FALSE(errno == EPERM); @@ -1240,8 +1229,8 @@ static void test_seal_mmap_expand(bool seal) } /* use mmap to expand. */ - ret2 = sys_mmap(ptr, size, PROT_READ, - MAP_ANONYMOUS | MAP_PRIVATE | MAP_FIXED, -1, 0); + ret2 = mmap(ptr, size, PROT_READ, + MAP_ANONYMOUS | MAP_PRIVATE | MAP_FIXED, -1, 0); if (seal) { FAIL_TEST_IF_FALSE(ret2 == MAP_FAILED); FAIL_TEST_IF_FALSE(errno == EPERM); @@ -1268,8 +1257,8 @@ static void test_seal_mmap_shrink(bool seal) } /* use mmap to shrink. */ - ret2 = sys_mmap(ptr, 8 * page_size, PROT_READ, - MAP_ANONYMOUS | MAP_PRIVATE | MAP_FIXED, -1, 0); + ret2 = mmap(ptr, 8 * page_size, PROT_READ, + MAP_ANONYMOUS | MAP_PRIVATE | MAP_FIXED, -1, 0); if (seal) { FAIL_TEST_IF_FALSE(ret2 == MAP_FAILED); FAIL_TEST_IF_FALSE(errno == EPERM); @@ -1650,7 +1639,7 @@ static void test_seal_discard_ro_anon_on_filebacked(bool seal) ret = fallocate(fd, 0, 0, size); FAIL_TEST_IF_FALSE(!ret); - ptr = sys_mmap(NULL, size, PROT_READ, mapflags, fd, 0); + ptr = mmap(NULL, size, PROT_READ, mapflags, fd, 0); FAIL_TEST_IF_FALSE(ptr != MAP_FAILED); if (seal) { @@ -1680,7 +1669,7 @@ static void test_seal_discard_ro_anon_on_shared(bool seal) int ret; unsigned long mapflags = MAP_ANONYMOUS | MAP_SHARED; - ptr = sys_mmap(NULL, size, PROT_READ, mapflags, -1, 0); + ptr = mmap(NULL, size, PROT_READ, mapflags, -1, 0); FAIL_TEST_IF_FALSE(ptr != (void *)-1); if (seal) { diff --git a/tools/testing/selftests/mm/seal_elf.c b/tools/testing/selftests/mm/seal_elf.c index 7aa1366063e4e..d9f8ba8d5050b 100644 --- a/tools/testing/selftests/mm/seal_elf.c +++ b/tools/testing/selftests/mm/seal_elf.c @@ -30,17 +30,6 @@ static int sys_mseal(void *start, size_t len) return sret; } -static void *sys_mmap(void *addr, unsigned long len, unsigned long prot, - unsigned long flags, unsigned long fd, unsigned long offset) -{ - void *sret; - - errno = 0; - sret = (void *) syscall(__NR_mmap, addr, len, prot, - flags, fd, offset); - return sret; -} - static inline int sys_mprotect(void *ptr, size_t size, unsigned long prot) { int sret; @@ -56,7 +45,7 @@ static bool seal_support(void) void *ptr; unsigned long page_size = getpagesize(); - ptr = sys_mmap(NULL, page_size, PROT_READ, MAP_ANONYMOUS | MAP_PRIVATE, -1, 0); + ptr = mmap(NULL, page_size, PROT_READ, MAP_ANONYMOUS | MAP_PRIVATE, -1, 0); if (ptr == (void *) -1) return false; -- 2.39.2

8 months

4
6
0 0

[PATCH 6.6 v2 1/4] riscv: dts: starfive: add assigned-clock* to limit frquency

by WangYuli

From: William Qiu <william.qiu(a)starfivetech.com> [ Upstream commit af571133f7ae028ec9b5fdab78f483af13bf28d3 ] In JH7110 SoC, we need to go by-pass mode, so we need add the assigned-clock* properties to limit clock frquency. Signed-off-by: William Qiu <william.qiu(a)starfivetech.com> Reviewed-by: Emil Renner Berthing <emil.renner.berthing(a)canonical.com> Signed-off-by: Conor Dooley <conor.dooley(a)microchip.com> Signed-off-by: WangYuli <wangyuli(a)uniontech.com> --- .../riscv/boot/dts/starfive/jh7110-starfive-visionfive-2.dtsi | 4 ++++ 1 file changed, 4 insertions(+) diff --git a/arch/riscv/boot/dts/starfive/jh7110-starfive-visionfive-2.dtsi b/arch/riscv/boot/dts/starfive/jh7110-starfive-visionfive-2.dtsi index 062b97c6e7df..4874e3bb42ab 100644 --- a/arch/riscv/boot/dts/starfive/jh7110-starfive-visionfive-2.dtsi +++ b/arch/riscv/boot/dts/starfive/jh7110-starfive-visionfive-2.dtsi @@ -204,6 +204,8 @@ &i2c6 { &mmc0 { max-frequency = <100000000>; + assigned-clocks = <&syscrg JH7110_SYSCLK_SDIO0_SDCARD>; + assigned-clock-rates = <50000000>; bus-width = <8>; cap-mmc-highspeed; mmc-ddr-1_8v; @@ -220,6 +222,8 @@ &mmc0 { &mmc1 { max-frequency = <100000000>; + assigned-clocks = <&syscrg JH7110_SYSCLK_SDIO1_SDCARD>; + assigned-clock-rates = <50000000>; bus-width = <4>; no-sdio; no-mmc; -- 2.43.4

8 months

3
4
0 0

[PATCH 6.11 regression fix 1/2] power: supply: Drop use_cnt check from power_supply_property_is_writeable()

by Hans de Goede

power_supply_property_is_writeable() gets called from the is_visible() callback for the sysfs attributes of power_supply class devices and for the sysfs attributes of power_supply core instantiated hwmon class devices. These sysfs attributes get registered by the device_add() respectively power_supply_add_hwmon_sysfs() calls in power_supply_register(). use_cnt gets initialized to 0 and is incremented only after these calls. So when power_supply_property_is_writeable() gets called it always return -ENODEV because of use_cnt == 0. This causes all the attributes to have permissions of 444 even those which should be writable. This used to be a problem only for hwmon sysfs attributes but since commit be6299c6e55e ("power: supply: sysfs: use power_supply_property_is_writeable()") this now also impacts power_supply class sysfs attributes. Fixes: be6299c6e55e ("power: supply: sysfs: use power_supply_property_is_writeable()") Fixes: e67d4dfc9ff1 ("power: supply: Add HWMON compatibility layer") Cc: stable(a)vger.kernel.org Cc: Thomas Weißschuh <linux(a)weissschuh.net> Cc: Andrey Smirnov <andrew.smirnov(a)gmail.com> Signed-off-by: Hans de Goede <hdegoede(a)redhat.com> --- The fixing of be6299c6e55e is a 6.11 regression fix, the fixing of e67d4dfc9ff1 hwmon attr never being writable is a stable series fix. This supersedes the "power: supply: sysfs: Revert use power_supply_property_is_writeable()" patch. --- drivers/power/supply/power_supply_core.c | 6 +----- 1 file changed, 1 insertion(+), 5 deletions(-) diff --git a/drivers/power/supply/power_supply_core.c b/drivers/power/supply/power_supply_core.c index 0417fb34e846..49534458a9f7 100644 --- a/drivers/power/supply/power_supply_core.c +++ b/drivers/power/supply/power_supply_core.c @@ -1231,11 +1231,7 @@ EXPORT_SYMBOL_GPL(power_supply_set_property); int power_supply_property_is_writeable(struct power_supply *psy, enum power_supply_property psp) { - if (atomic_read(&psy->use_cnt) <= 0 || - !psy->desc->property_is_writeable) - return -ENODEV; - - return psy->desc->property_is_writeable(psy, psp); + return psy->desc->property_is_writeable && psy->desc->property_is_writeable(psy, psp); } EXPORT_SYMBOL_GPL(power_supply_property_is_writeable); -- 2.46.0

8 months

3
3
0 0

2025

2024

2023

2022

2021

2020

2019

2018

2017

Linux-stable-mirror September 2024