August 2024 - Linux-stable-mirror

[PATCH v2 RESEND] EDAC/altera: Fix possible null pointer dereference

by Ma Ke

In altr_s10_sdram_check_ecc_deps(), of_get_address() may return NULL which is later dereferenced. Fix this bug by adding NULL check. of_translate_address() is the same. Found by code review. Cc: stable(a)vger.kernel.org Fixes: e1bca853dddc ("EDAC/altera: Add SDRAM ECC check for U-Boot") Signed-off-by: Ma Ke <make24(a)iscas.ac.cn> --- Changes in v2: - modified the check of of_translate_address() as suggestions. --- drivers/edac/altera_edac.c | 11 +++++++++-- 1 file changed, 9 insertions(+), 2 deletions(-) diff --git a/drivers/edac/altera_edac.c b/drivers/edac/altera_edac.c index fe89f5c4837f..4fbfa338e05f 100644 --- a/drivers/edac/altera_edac.c +++ b/drivers/edac/altera_edac.c @@ -1086,6 +1086,7 @@ static int altr_s10_sdram_check_ecc_deps(struct altr_edac_device_dev *device) struct arm_smccc_res result; struct device_node *np; phys_addr_t sdram_addr; + const __be32 *sdram_addrp; u32 read_reg; int ret; @@ -1093,8 +1094,14 @@ static int altr_s10_sdram_check_ecc_deps(struct altr_edac_device_dev *device) if (!np) goto sdram_err; - sdram_addr = of_translate_address(np, of_get_address(np, 0, - NULL, NULL)); + sdram_addrp = of_get_address(np, 0, NULL, NULL); + if (!sdram_addrp) + return -EINVAL; + + sdram_addr = of_translate_address(np, sdram_addrp); + if (sdram_addr == OF_BAD_ADDR) + return -EINVAL; + of_node_put(np); sdram_ecc_addr = (unsigned long)sdram_addr + prv->ecc_en_ofst; arm_smccc_smc(INTEL_SIP_SMC_REG_READ, sdram_ecc_addr, -- 2.25.1

8 months, 2 weeks

1
0
0 0

[PATCH] usb: dwc3: ep0: Don't reset resource alloc flag (including ep0)

by Michael Grzeschik

The DWC3_EP_RESOURCE_ALLOCATED flag ensures that the resource of an endpoint is only assigned once. Unless the endpoint is reset, don't clear this flag. Otherwise we may set endpoint resource again, which prevents the driver from initiate transfer after handling a STALL or endpoint halt to the control endpoint. Commit f2e0eee47038 (usb: dwc3: ep0: Don't reset resource alloc flag) was fixing the initial issue, but did this only for physical ep1. Since the function dwc3_ep0_stall_and_restart is resetting the flags for both physical endpoints, this also has to be done for ep0. Cc: stable(a)vger.kernel.org Fixes: b311048c174d ("usb: dwc3: gadget: Rewrite endpoint allocation flow") Signed-off-by: Michael Grzeschik <m.grzeschik(a)pengutronix.de> --- drivers/usb/dwc3/ep0.c | 3 ++- 1 file changed, 2 insertions(+), 1 deletion(-) diff --git a/drivers/usb/dwc3/ep0.c b/drivers/usb/dwc3/ep0.c index d96ffbe520397..c9533a99e47c8 100644 --- a/drivers/usb/dwc3/ep0.c +++ b/drivers/usb/dwc3/ep0.c @@ -232,7 +232,8 @@ void dwc3_ep0_stall_and_restart(struct dwc3 *dwc) /* stall is always issued on EP0 */ dep = dwc->eps[0]; __dwc3_gadget_ep_set_halt(dep, 1, false); - dep->flags = DWC3_EP_ENABLED; + dep->flags &= DWC3_EP_RESOURCE_ALLOCATED; + dep->flags |= DWC3_EP_ENABLED; dwc->delayed_status = false; if (!list_empty(&dep->pending_list)) { --- base-commit: 38343be0bf9a7d7ef0d160da5f2db887a0e29b62 change-id: 20240814-dwc3hwep0reset-b4d371873494 Best regards, -- Michael Grzeschik <m.grzeschik(a)pengutronix.de>

8 months, 2 weeks

3
5
0 0

[merged] squashfs-sanity-check-symbolic-link-size.patch removed from -mm tree

by Andrew Morton

The quilt patch titled Subject: Squashfs: sanity check symbolic link size has been removed from the -mm tree. Its filename was squashfs-sanity-check-symbolic-link-size.patch This patch was dropped because it was merged into mainline or a subsystem tree ------------------------------------------------------ From: Phillip Lougher <phillip(a)squashfs.org.uk> Subject: Squashfs: sanity check symbolic link size Date: Sun, 11 Aug 2024 21:13:01 +0100 Syzkiller reports a "KMSAN: uninit-value in pick_link" bug. This is caused by an uninitialised page, which is ultimately caused by a corrupted symbolic link size read from disk. The reason why the corrupted symlink size causes an uninitialised page is due to the following sequence of events: 1. squashfs_read_inode() is called to read the symbolic link from disk. This assigns the corrupted value 3875536935 to inode->i_size. 2. Later squashfs_symlink_read_folio() is called, which assigns this corrupted value to the length variable, which being a signed int, overflows producing a negative number. 3. The following loop that fills in the page contents checks that the copied bytes is less than length, which being negative means the loop is skipped, producing an unitialised page. This patch adds a sanity check which checks that the symbolic link size is not larger than expected. Link: https://lkml.kernel.org/r/20240811201301.13076-1-phillip@squashfs.org.uk Signed-off-by: Phillip Lougher <phillip(a)squashfs.org.uk> Reported-by: Lizhi Xu <lizhi.xu(a)windriver.com> Reported-by: syzbot+24ac24ff58dc5b0d26b9(a)syzkaller.appspotmail.com Closes: https://lore.kernel.org/all/000000000000a90e8c061e86a76b@google.com/ Cc: Al Viro <viro(a)zeniv.linux.org.uk> Cc: Christian Brauner <brauner(a)kernel.org> Cc: Jan Kara <jack(a)suse.cz> Cc: Phillip Lougher <phillip(a)squashfs.org.uk> Cc: <stable(a)vger.kernel.org> Signed-off-by: Andrew Morton <akpm(a)linux-foundation.org> --- fs/squashfs/inode.c | 7 ++++++- 1 file changed, 6 insertions(+), 1 deletion(-) --- a/fs/squashfs/inode.c~squashfs-sanity-check-symbolic-link-size +++ a/fs/squashfs/inode.c @@ -279,8 +279,13 @@ int squashfs_read_inode(struct inode *in if (err < 0) goto failed_read; - set_nlink(inode, le32_to_cpu(sqsh_ino->nlink)); inode->i_size = le32_to_cpu(sqsh_ino->symlink_size); + if (inode->i_size > PAGE_SIZE) { + ERROR("Corrupted symlink\n"); + return -EINVAL; + } + + set_nlink(inode, le32_to_cpu(sqsh_ino->nlink)); inode->i_op = &squashfs_symlink_inode_ops; inode_nohighmem(inode); inode->i_data.a_ops = &squashfs_symlink_aops; _ Patches currently in -mm which might be from phillip(a)squashfs.org.uk are

8 months, 2 weeks

1
0
0 0

[PATCH 1/2] usb: dwc3: st: fix probed platform device ref count on probe error path

by Krzysztof Kozlowski

The probe function never performs any paltform device allocation, thus error path "undo_platform_dev_alloc" is entirely bogus. It drops the reference count from the platform device being probed. If error path is triggered, this will lead to unbalanced device reference counts and premature release of device resources, thus possible use-after-free when releasing remaining devm-managed resources. Fixes: f83fca0707c6 ("usb: dwc3: add ST dwc3 glue layer to manage dwc3 HC") Cc: <stable(a)vger.kernel.org> Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski(a)linaro.org> --- drivers/usb/dwc3/dwc3-st.c | 11 +++-------- 1 file changed, 3 insertions(+), 8 deletions(-) diff --git a/drivers/usb/dwc3/dwc3-st.c b/drivers/usb/dwc3/dwc3-st.c index 211360eee95a..a9cb04043f08 100644 --- a/drivers/usb/dwc3/dwc3-st.c +++ b/drivers/usb/dwc3/dwc3-st.c @@ -219,10 +219,8 @@ static int st_dwc3_probe(struct platform_device *pdev) dwc3_data->regmap = regmap; res = platform_get_resource_byname(pdev, IORESOURCE_MEM, "syscfg-reg"); - if (!res) { - ret = -ENXIO; - goto undo_platform_dev_alloc; - } + if (!res) + return -ENXIO; dwc3_data->syscfg_reg_off = res->start; @@ -233,8 +231,7 @@ static int st_dwc3_probe(struct platform_device *pdev) devm_reset_control_get_exclusive(dev, "powerdown"); if (IS_ERR(dwc3_data->rstc_pwrdn)) { dev_err(&pdev->dev, "could not get power controller\n"); - ret = PTR_ERR(dwc3_data->rstc_pwrdn); - goto undo_platform_dev_alloc; + return PTR_ERR(dwc3_data->rstc_pwrdn); } /* Manage PowerDown */ @@ -300,8 +297,6 @@ static int st_dwc3_probe(struct platform_device *pdev) reset_control_assert(dwc3_data->rstc_rst); undo_powerdown: reset_control_assert(dwc3_data->rstc_pwrdn); -undo_platform_dev_alloc: - platform_device_put(pdev); return ret; } -- 2.43.0

8 months, 2 weeks

3
5
0 0

[PATCH 6.1.y] xfs: remove WARN when dquot cache insertion fails

by Abhinav Jain

commit 4b827b3f305d ("xfs: remove WARN when dquot cache insertion fails") Disk quota cache insertion failure doesn't require this warning as the system can still manage and track disk quotas without caching the dquot object into memory. The failure doesn't imply any data loss or corruption. Therefore, the WARN_ON in xfs_qm_dqget_cache_insert function is aggressive and causes bot noise. I have confirmed there are no conflicts and also tested the using the C repro from syzkaller: https://syzkaller.appspot.com/text?tag=ReproC&x=15406772280000 Please do let me know if I missed out on anything as it's my first backport patch. Reported-by: syzbot+55fb1b7d909494fd520d(a)syzkaller.appspotmail.com Signed-off-by: Abhinav Jain <jain.abhinav177(a)gmail.com> --- fs/xfs/xfs_dquot.c | 1 - 1 file changed, 1 deletion(-) diff --git a/fs/xfs/xfs_dquot.c b/fs/xfs/xfs_dquot.c index 8fb90da89787..7f071757f278 100644 --- a/fs/xfs/xfs_dquot.c +++ b/fs/xfs/xfs_dquot.c @@ -798,7 +798,6 @@ xfs_qm_dqget_cache_insert( error = radix_tree_insert(tree, id, dqp); if (unlikely(error)) { /* Duplicate found! Caller must try again. */ - WARN_ON(error != -EEXIST); mutex_unlock(&qi->qi_tree_lock); trace_xfs_dqget_dup(dqp); return error; -- 2.34.1

8 months, 2 weeks

3
3
0 0

[PATCH v2 1/2] drm/vmwgfx: Prevent unmapping active read buffers

by Zack Rusin

The kms paths keep a persistent map active to read and compare the cursor buffer. These maps can race with each other in simple scenario where: a) buffer "a" mapped for update b) buffer "a" mapped for compare c) do the compare d) unmap "a" for compare e) update the cursor f) unmap "a" for update At step "e" the buffer has been unmapped and the read contents is bogus. Prevent unmapping of active read buffers by simply keeping a count of how many paths have currently active maps and unmap only when the count reaches 0. v2: Update doc strings Fixes: 485d98d472d5 ("drm/vmwgfx: Add support for CursorMob and CursorBypass 4") Cc: Broadcom internal kernel review list <bcm-kernel-feedback-list(a)broadcom.com> Cc: dri-devel(a)lists.freedesktop.org Cc: <stable(a)vger.kernel.org> # v5.19+ Signed-off-by: Zack Rusin <zack.rusin(a)broadcom.com> --- drivers/gpu/drm/vmwgfx/vmwgfx_bo.c | 13 +++++++++++-- drivers/gpu/drm/vmwgfx/vmwgfx_bo.h | 3 +++ 2 files changed, 14 insertions(+), 2 deletions(-) diff --git a/drivers/gpu/drm/vmwgfx/vmwgfx_bo.c b/drivers/gpu/drm/vmwgfx/vmwgfx_bo.c index f42ebc4a7c22..a0e433fbcba6 100644 --- a/drivers/gpu/drm/vmwgfx/vmwgfx_bo.c +++ b/drivers/gpu/drm/vmwgfx/vmwgfx_bo.c @@ -360,6 +360,8 @@ void *vmw_bo_map_and_cache_size(struct vmw_bo *vbo, size_t size) void *virtual; int ret; + atomic_inc(&vbo->map_count); + virtual = ttm_kmap_obj_virtual(&vbo->map, &not_used); if (virtual) return virtual; @@ -383,11 +385,17 @@ void *vmw_bo_map_and_cache_size(struct vmw_bo *vbo, size_t size) */ void vmw_bo_unmap(struct vmw_bo *vbo) { + int map_count; + if (vbo->map.bo == NULL) return; - ttm_bo_kunmap(&vbo->map); - vbo->map.bo = NULL; + map_count = atomic_dec_return(&vbo->map_count); + + if (!map_count) { + ttm_bo_kunmap(&vbo->map); + vbo->map.bo = NULL; + } } @@ -421,6 +429,7 @@ static int vmw_bo_init(struct vmw_private *dev_priv, vmw_bo->tbo.priority = 3; vmw_bo->res_tree = RB_ROOT; xa_init(&vmw_bo->detached_resources); + atomic_set(&vmw_bo->map_count, 0); params->size = ALIGN(params->size, PAGE_SIZE); drm_gem_private_object_init(vdev, &vmw_bo->tbo.base, params->size); diff --git a/drivers/gpu/drm/vmwgfx/vmwgfx_bo.h b/drivers/gpu/drm/vmwgfx/vmwgfx_bo.h index 62b4342d5f7c..43b5439ec9f7 100644 --- a/drivers/gpu/drm/vmwgfx/vmwgfx_bo.h +++ b/drivers/gpu/drm/vmwgfx/vmwgfx_bo.h @@ -71,6 +71,8 @@ struct vmw_bo_params { * @map: Kmap object for semi-persistent mappings * @res_tree: RB tree of resources using this buffer object as a backing MOB * @res_prios: Eviction priority counts for attached resources + * @map_count: The number of currently active maps. Will differ from the + * cpu_writers because it includes kernel maps. * @cpu_writers: Number of synccpu write grabs. Protected by reservation when * increased. May be decreased without reservation. * @dx_query_ctx: DX context if this buffer object is used as a DX query MOB @@ -90,6 +92,7 @@ struct vmw_bo { u32 res_prios[TTM_MAX_BO_PRIORITY]; struct xarray detached_resources; + atomic_t map_count; atomic_t cpu_writers; /* Not ref-counted. Protected by binding_mutex */ struct vmw_resource *dx_query_ctx; -- 2.43.0

8 months, 2 weeks

3
3
0 0

[PATCH] ASoC: codecs: wcd937x: Fix missing de-assert of reset GPIO

by Krzysztof Kozlowski

The device never comes online from a reset/shutdown state, because the driver de-asserts reset GPIO when requesting it but then, at the end of probe() through wcd937x_reset(), leaves it asserted. Cc: <stable(a)vger.kernel.org> Fixes: 9be3ec196da4 ("ASoC: codecs: wcd937x: add wcd937x codec driver") Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski(a)linaro.org> --- Cc: Alexey Klimov <alexey.klimov(a)linaro.org> --- sound/soc/codecs/wcd937x.c | 5 ++--- 1 file changed, 2 insertions(+), 3 deletions(-) diff --git a/sound/soc/codecs/wcd937x.c b/sound/soc/codecs/wcd937x.c index 13926f4b0d9f..af296b77a723 100644 --- a/sound/soc/codecs/wcd937x.c +++ b/sound/soc/codecs/wcd937x.c @@ -242,10 +242,9 @@ static const struct regmap_irq_chip wcd937x_regmap_irq_chip = { static void wcd937x_reset(struct wcd937x_priv *wcd937x) { - usleep_range(20, 30); - gpiod_set_value(wcd937x->reset_gpio, 1); - + usleep_range(20, 30); + gpiod_set_value(wcd937x->reset_gpio, 0); usleep_range(20, 30); } -- 2.43.0

8 months, 2 weeks

2
1
0 0

+ nilfs2-fix-state-management-in-error-path-of-log-writing-function.patch added to mm-hotfixes-unstable branch

by Andrew Morton

The patch titled Subject: nilfs2: fix state management in error path of log writing function has been added to the -mm mm-hotfixes-unstable branch. Its filename is nilfs2-fix-state-management-in-error-path-of-log-writing-function.patch This patch will shortly appear at https://git.kernel.org/pub/scm/linux/kernel/git/akpm/25-new.git/tree/patche… This patch will later appear in the mm-hotfixes-unstable branch at git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm Before you just go and hit "reply", please: a) Consider who else should be cc'ed b) Prefer to cc a suitable mailing list as well c) Ideally: find the original patch on the mailing list and do a reply-to-all to that, adding suitable additional cc's *** Remember to use Documentation/process/submit-checklist.rst when testing your code *** The -mm tree is included into linux-next via the mm-everything branch at git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm and is updated there every 2-3 working days ------------------------------------------------------ From: Ryusuke Konishi <konishi.ryusuke(a)gmail.com> Subject: nilfs2: fix state management in error path of log writing function Date: Wed, 14 Aug 2024 19:11:19 +0900 After commit a694291a6211 ("nilfs2: separate wait function from nilfs_segctor_write") was applied, the log writing function nilfs_segctor_do_construct() was able to issue I/O requests continuously even if user data blocks were split into multiple logs across segments, but two potential flaws were introduced in its error handling. First, if nilfs_segctor_begin_construction() fails while creating the second or subsequent logs, the log writing function returns without calling nilfs_segctor_abort_construction(), so the writeback flag set on pages/folios will remain uncleared. This causes page cache operations to hang waiting for the writeback flag. For example, truncate_inode_pages_final(), which is called via nilfs_evict_inode() when an inode is evicted from memory, will hang. Second, the NILFS_I_COLLECTED flag set on normal inodes remain uncleared. As a result, if the next log write involves checkpoint creation, that's fine, but if a partial log write is performed that does not, inodes with NILFS_I_COLLECTED set are erroneously removed from the "sc_dirty_files" list, and their data and b-tree blocks may not be written to the device, corrupting the block mapping. Fix these issues by uniformly calling nilfs_segctor_abort_construction() on failure of each step in the loop in nilfs_segctor_do_construct(), having it clean up logs and segment usages according to progress, and correcting the conditions for calling nilfs_redirty_inodes() to ensure that the NILFS_I_COLLECTED flag is cleared. Link: https://lkml.kernel.org/r/20240814101119.4070-1-konishi.ryusuke@gmail.com Fixes: a694291a6211 ("nilfs2: separate wait function from nilfs_segctor_write") Signed-off-by: Ryusuke Konishi <konishi.ryusuke(a)gmail.com> Tested-by: Ryusuke Konishi <konishi.ryusuke(a)gmail.com> Cc: <stable(a)vger.kernel.org> Signed-off-by: Andrew Morton <akpm(a)linux-foundation.org> --- fs/nilfs2/segment.c | 10 ++++++---- 1 file changed, 6 insertions(+), 4 deletions(-) --- a/fs/nilfs2/segment.c~nilfs2-fix-state-management-in-error-path-of-log-writing-function +++ a/fs/nilfs2/segment.c @@ -1812,6 +1812,9 @@ static void nilfs_segctor_abort_construc nilfs_abort_logs(&logs, ret ? : err); list_splice_tail_init(&sci->sc_segbufs, &logs); + if (list_empty(&logs)) + return; /* if the first segment buffer preparation failed */ + nilfs_cancel_segusage(&logs, nilfs->ns_sufile); nilfs_free_incomplete_logs(&logs, nilfs); @@ -2056,7 +2059,7 @@ static int nilfs_segctor_do_construct(st err = nilfs_segctor_begin_construction(sci, nilfs); if (unlikely(err)) - goto out; + goto failed; /* Update time stamp */ sci->sc_seg_ctime = ktime_get_real_seconds(); @@ -2120,10 +2123,9 @@ static int nilfs_segctor_do_construct(st return err; failed_to_write: - if (sci->sc_stage.flags & NILFS_CF_IFILE_STARTED) - nilfs_redirty_inodes(&sci->sc_dirty_files); - failed: + if (mode == SC_LSEG_SR && nilfs_sc_cstage_get(sci) >= NILFS_ST_IFILE) + nilfs_redirty_inodes(&sci->sc_dirty_files); if (nilfs_doing_gc()) nilfs_redirty_inodes(&sci->sc_gc_inodes); nilfs_segctor_abort_construction(sci, nilfs, err); _ Patches currently in -mm which might be from konishi.ryusuke(a)gmail.com are nilfs2-protect-references-to-superblock-parameters-exposed-in-sysfs.patch nilfs2-fix-missing-cleanup-on-rollforward-recovery-error.patch nilfs2-fix-state-management-in-error-path-of-log-writing-function.patch

8 months, 2 weeks

1
0
0 0

[PATCH 3/3] ACPI: video: Add backlight=native quirk for Dell OptiPlex 7760 AIO

by Hans de Goede

Dell All In One (AIO) models released after 2017 may use a backlight controller board connected to an UART. In DSDT this uart port will be defined as: Name (_HID, "DELL0501") Name (_CID, EisaId ("PNP0501") The Dell OptiPlex 7760 AIO has an ACPI device for one if its UARTs with the above _HID + _CID. Loading the dell-uart-backlight driver shows that there actually is a backlight controller board attached to the UART, which reports a firmware version of "G&MX01-V15". But the backlight controller board does not actually control the backlight brightness and the GPU's native backlight control method does work. Add a quirk to use the GPU's native backlight control method on this model. Fixes: 484bae9e4d6a ("platform/x86: Add new Dell UART backlight driver") Closes: https://bugzilla.redhat.com/show_bug.cgi?id=2303936 Cc: stable(a)vger.kernel.org Signed-off-by: Hans de Goede <hdegoede(a)redhat.com> --- drivers/acpi/video_detect.c | 15 +++++++++++++++ 1 file changed, 15 insertions(+) diff --git a/drivers/acpi/video_detect.c b/drivers/acpi/video_detect.c index e509dcbf3090..674b9db7a1ef 100644 --- a/drivers/acpi/video_detect.c +++ b/drivers/acpi/video_detect.c @@ -823,6 +823,21 @@ static const struct dmi_system_id video_detect_dmi_table[] = { }, }, + /* + * Dell AIO (All in Ones) which advertise an UART attached backlight + * controller board in their ACPI tables (and may even have one), but + * which need native backlight control nevertheless. + */ + { + /* https://bugzilla.redhat.com/show_bug.cgi?id=2303936 */ + .callback = video_detect_force_native, + /* Dell OptiPlex 7760 AIO */ + .matches = { + DMI_MATCH(DMI_SYS_VENDOR, "Dell Inc."), + DMI_MATCH(DMI_PRODUCT_NAME, "OptiPlex 7760 AIO"), + }, + }, + /* * Models which have nvidia-ec-wmi support, but should not use it. * Note this indicates a likely firmware bug on these models and should -- 2.46.0

8 months, 2 weeks

1
0
0 0

[PATCH 2/3] platform/x86: dell-uart-backlight: Use acpi_video_get_backlight_type()

by Hans de Goede

The dell-uart-backlight driver supports backlight control on Dell All In One (AIO) models using a backlight controller board connected to an UART. In DSDT this uart port will be defined as: Name (_HID, "DELL0501") Name (_CID, EisaId ("PNP0501") Now the first AIO has turned up which has not only the DSDT bits for this, but also an actual controller attached to the UART, yet it is not using this controller for backlight control. Use the acpi_video_get_backlight_type() function from the ACPI video-detect code to check if the dell-uart-backlight driver should actually be used. This allows reusing the existing ACPI video-detect infra to override the backlight control method on the commandline or with DMI quirks. Fixes: 484bae9e4d6a ("platform/x86: Add new Dell UART backlight driver") Cc: stable(a)vger.kernel.org Signed-off-by: Hans de Goede <hdegoede(a)redhat.com> --- drivers/platform/x86/dell/Kconfig | 1 + drivers/platform/x86/dell/dell-uart-backlight.c | 8 ++++++++ 2 files changed, 9 insertions(+) diff --git a/drivers/platform/x86/dell/Kconfig b/drivers/platform/x86/dell/Kconfig index f711c59fcf1b..11c2cb7d05b0 100644 --- a/drivers/platform/x86/dell/Kconfig +++ b/drivers/platform/x86/dell/Kconfig @@ -162,6 +162,7 @@ config DELL_SMO8800 config DELL_UART_BACKLIGHT tristate "Dell AIO UART Backlight driver" depends on ACPI + depends on ACPI_VIDEO depends on BACKLIGHT_CLASS_DEVICE depends on SERIAL_DEV_BUS help diff --git a/drivers/platform/x86/dell/dell-uart-backlight.c b/drivers/platform/x86/dell/dell-uart-backlight.c index 87d2a20b4cb3..3995f90add45 100644 --- a/drivers/platform/x86/dell/dell-uart-backlight.c +++ b/drivers/platform/x86/dell/dell-uart-backlight.c @@ -20,6 +20,7 @@ #include <linux/string.h> #include <linux/types.h> #include <linux/wait.h> +#include <acpi/video.h> #include "../serdev_helpers.h" /* The backlight controller must respond within 1 second */ @@ -332,10 +333,17 @@ struct serdev_device_driver dell_uart_bl_serdev_driver = { static int dell_uart_bl_pdev_probe(struct platform_device *pdev) { + enum acpi_backlight_type bl_type; struct serdev_device *serdev; struct device *ctrl_dev; int ret; + bl_type = acpi_video_get_backlight_type(); + if (bl_type != acpi_backlight_dell_uart) { + dev_dbg(&pdev->dev, "Not loading (ACPI backlight type = %d)\n", bl_type); + return -ENODEV; + } + ctrl_dev = get_serdev_controller("DELL0501", NULL, 0, "serial0"); if (IS_ERR(ctrl_dev)) return PTR_ERR(ctrl_dev); -- 2.46.0

8 months, 2 weeks

1
0
0 0

2025

2024

2023

2022

2021

2020

2019

2018

2017

Linux-stable-mirror August 2024